Beruflich Dokumente
Kultur Dokumente
g Proj: Admin
Ref :
Tel:d Date: 28/08/17
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Rectangular column section
Calculation of main and link reinforcement for rectangular uniaxial column in accordance with BS EN 1992-1-1:2004 and UK
National Annex to BS EN 1992-1-1:2004 using the equivalent rectangular concrete stress block method
Section details
Clear height L = 3.000 m
Overall depth of the column d = 600 mm
Breadth of the column b = 450 mm
w
Material details
Concrete strength class f = C30/37
ck
Partial safety factor for concrete = 1.5
c
Reinforcement steel design strength f = 500 MPa
yk
Reinforcement steel class Class - C
Partial safety factor for reinforcement steel = 1.15
s
Slenderness ratio
Radius of gyration about the x-axis
i = d/SQR(12)
x
= 600/SQR(12)
= 173.21 mm
Slenderness ratio for buckling about the x-axis
= (l *103)/i
actx ox x
= (2.25*103)/173.21
= 12.99
(Note:This uniaxial template will carry out the slenderness and strength checks for the selected axis of bending selected only.)
First order moment (EC2-Clause 5.8.8.2)
Numerically largest first order end moment about the x-axis
M = 0 kNm
02x
Numerically smallest first order end moment about the x-axis
M = 0 kNm
01x
Design moments
Braced, single curvature
Resultant moment at top in x-axis
M = M
edx1 02x
= 16.9 kNm
Resultant moment at intermediate height in x-axis
M = M
edx2 0ex
= 16.9 kNm
Resultant moment at bottom in x-axis
M = M
edx3 01x
= 16.9 kNm
Minimum moment due to eccentricity in x-axis
M = M
edx4 minx
= 60 kNm
Final design moment in x-axis
M = M
edx edx4
= 60 kNm
Maximum number of bars that can be allowed in left and right faces (Minor axis bending)
no = INT((d-2*C -2* +S )/(S + ))
ymax clear links Hmin Hmin main
= INT((600-2*30-2*10+25)/(25+16))
= 13
Provided number of bars in left and right faces
no = 2
yaxis
The provided number of bars is less than the maximum number of bars. Hence satisfies the minimum bar spacing limit.
Results summary
(Note:This uniaxial template will carry out the slenderness and strength checks for the selected axis of bending selected only.)
Required reinforcement area = 690 mm2
Provided number of bars
X-axis (Major axis bending) Y-axis (Minor axis bending) Total number of bars
Far Near Left Right
2 2 2 2 4
Main bar diameter = 16 mm
Provided reinforcement area = 804 mm2