Beruflich Dokumente
Kultur Dokumente
These instructions are for individuals of ages 5 to Adult who wishes to fly a one piece
Frozen kite.
Components
1. On the back of the kite, remove the Spine from the Connector located at the
Bottom
2. Pass the Spine, that was previously removed, through the Hole on the tail
4. Pass the Spreader through the Holes located on Left/Right side of the kite.
Perform the step on whichever side of the kite you prefer to do first.
5. Insert the Spreader into the Wing Connector located Below the Hole on the side
6. Insert the Spreader through the Spine Connectors located at the Top Center of
the kite
7. Pass the Spreader through the Holes located on the remaining side which is the
8. Insert the Spreader into the Wing Connector located Below the Holes on the
remaining side
9. Straighten out the Tails that are connected to the spine at the bottom
10. On the front of the kite, Double Knot the Line to the Ring
For the best kite flying experience, Always find a location that is open and free of
buildings or trees. With your back to the wind, release your kite into the air and
let the line out slowly while occasionally pulling to gain altitude.
Kite Safety
Over people
In thunderstorms
WARNING!
Call your local power company for assistance if the kite gets caught in a
power line