Beruflich Dokumente
Kultur Dokumente
Condition Advisor
CMAS 100-SL
Machine monitoring, made simple
Now both novice users and experts can eas- Flexible enough to work with standard
ily, quickly, and accurately check the condi- 100 mV/g constant current accelerom-
tion of rotating equipment throughout your eters, an optional external sensor can be
facility. Equipping your maintenance and used for hard-to-reach locations and for
operations personnel with this rugged, ergo- more repeatable and accurate measure-
nomic and easy-to-use instrument can pro- ment results.
vide early warning of potential machine Features English, French, German, Portu-
problems before a costly failure occurs. guese, Spanish and Swedish for user con-
venience.
Features
Quick and easy to set up and use, meas- Multiple measurements with
urements are shown on a bright display a single device
viewable in low light to direct sunlight.
Free on-line training is also available at The SKF Machine Condition Advisor provides
SKF @ptitude Exchange. an overall Velocity vibration reading that
Lightweight, compact, and ergonomically measures vibration signals from the
designed, the SKF Machine Condition machine and automatically compares them
Advisor fits neatly at the belt line, in a to pre-programmed International Organiza-
pocket or a tool kit. Exceptionally durable, tion for Standardization (ISO) guidelines. An
the unit is rated IP 54 for use in industrial Alert or Danger alarm displays when
environments. measurements exceed those guidelines.
Alert and Danger prompts provide Simultaneously an Enveloped Acceleration
increased diagnostic confidence. measurement is taken and compared to
Measuring Velocity, Enveloped Accelera- established bearing vibration guidelines to
tion, and temperature simultaneously verify conformity or indicate potential bear-
saves time. ing damage.
Efficient, economical, and environmentally The SKF Machine Condition Advisor also
friendly, the rechargeable SKF Machine measures temperature using an infrared
Condition Advisor operates 10 hours on a sensor to indicate uncharacteristic heat.
single charge.
Accuracy, flexibility and surface temperature of the measurement Quick and easy first time
confidence location and simultaneously displays all and every time
three measurement values.
When performing measurements, the SKF Depending on the SKF Machine Condition 1 Press Select or Browse button to turn
Machine Condition Advisors acceleration Advisors System setting, the front-panel the SKF Machine Condition Advisor On.
sensor input signal is processed to produce LCD simultaneously displays: 2 Press the sensor tip against the point to
two different measurements for each POINT be measured.
on the machinery overall velocity and Units in Metric or English 3 When the readings stabilize, press the
enveloped acceleration. At the same time, Velocity in mm/s RMS or IPS derived Peak Select button to hold the reading.
the SKF Machine Condition Advisors non- Temperature in Celsius or Fahrenheit 4 Read and record the measurement values.
contact infrared sensor measures the Acceleration enveloping readings in gE
2
Understanding and using Options are: Expanding your capabilities
guidelines for vibration with SKF Machine Condition
G2 and 4R (default) Advisor compatible
The SKF Machine Condition Advisor provides Alert: 2,8 mm/s (0.16 ips) accessories
a means to evaluate machine health based Danger: 4,5 mm/s (0.25 ips)
on ISO 10816-3 and to evaluate the bear- Extension sensor kit Model CMAC 105-K
ings according to general guidelines devel- G2 and 4F The Extension sensor kit CMAC 105-K con-
oped from a statistical analysis of existing Alert: 4,5 mm/s (0.25 ips) tains an accelerometer with integral cable
databases. Danger: 7,1 mm/s (0.39 ips) (CMAC 104) and magnet (CMAC 109) with
mounting stud. This kit is needed to take
How to choose the correct Alarm Velocity G1 and 3R measurements from hard-to-reach places
Group for your machinery Alert: 4,5 mm/s (0.25 ips) and for more repeatable and accurate meas-
The Alarm Velocity Group (G2&4 or G1&3) Danger: 7,1 mm/s (0.39 ips) urement results.
determines the instruments overall vibra-
tion alarm limits. Therefore, select the G1 and 3F
Group that best describes the general size, Alert: 7,1 mm/s (0.39 ips)
type, and speed of the machinery being Danger: 11,0 mm/s (0.61 ips)
measured. Note that these machine group
classifications are set forth in ISO 10816-3, How to choose the correct Enveloped
which rates overall velocity vibration levels Acceleration Classification for your
for standardized machinery classifications. machinery
The Enveloped Acceleration Classification
Groups 2 and 4 (default) (CL1, CL2, or CL3) you specify determines
ISO Group 2 and 4 classifications define the the instruments bearing vibration alarm
following type of machinery: levels. Therefore, the Enveloped Acceleration
Classification that best describes the general Accelerometer
Medium-sized machines and electrical size and speed of the bearings being 100 mV/g sensitivity
machines with a shaft height between measured should be selected. Small size case
160 and 315 mm (6.3 and 12.4 in.). 0,5 to 15 000 Hz frequency response
These machines are normally equipped Options are: (3 dB)
with rolling element bearings, but may Waterproof
use sleeve bearings, and operate at CL1
speeds above 600 r/min. Bearings with a bearing bore diameter be- Integral cable (1,5 m standard)
These machines include pumps with tween 200 and 500 mm (7.9 and 19.7 in.) Connector to SKF Machine Condition
multi-vane impellers and integrated and a shaft speed below 500 r/min. Advisor CMAS 100-SL
drivers. Alert: 1 gE Various cable lengths available
Danger: 2 gE
Groups 1 and 3 Magnet, Model CMAC 109
ISO Group 1 and 3 classifications define the CL2 (default) 14 kg (30 lbs.) pull-strength
following type of machinery: Bearings with a bearing bore diameter 25 mm (1 in.) diameter
between 50 and 300 mm (2.0 and 11.8 in.) 1/4-28 mounting hole
Large machinery and electrical machines and a shaft speed between 500 and Case material: Stainless steel
with a shaft height greater than 315 mm 1 800 r/min. Magnet material: Neodymium
(12.4 in.). Alert: 2 gE 1/4-28 Mounting Stud
3
Expanding your capabilities with SKF 5,0 mm
(0.18 in.) SKF Machine Condition Advisor trend
Machine Condition Advisor compatible worksheet (Excel .xls file)
accessories (continued) SKF Condition Monitoring Essentials
catalog available in PDF file in English
Specifications (Accelerometer) [CM2355]
73,0 mm
CD, Integrating Condition Monitoring
Dynamic performance (2.87 in.) Products and Services, product catalog
Sensitivity (15%): 10,2 mV/(m/s2) 12,0 mm
[CM5057]
(100 mV/g) (0.49 in.)
27,0 mm Accessories
Dynamic range: 490 m/s2 (50 g) (1.07 in.) 14 mm
Frequency response: (9/16 in.) Extension kit, 100 mV/g accelerometer
Hex
3 dB: 30 to 900 000 CPM (0,5 to with 1,5 m integral cable and magnet
13,0 mm
15 000 Hz) (0.50 in.) [CMAC 105-K]
10%: 42 to 420 000 CPM (0,7 to 1/ -28 Extension kit, accelerometer with 3 m
4
7 000 Hz) Mounting hole (9.8 ft.) integral cable and magnet
[CMAC 105-K-3M]
Electrical Environmental Extension kit, accelerometer with 5 m
Settling time: 2,5 sec Temperature range: 50 to +121 C (16.4 ft.) integral cable and magnet
Voltage source: 18 to 30 V DC (58 to +250 F) [CMAC 105-K-5M]
Constant current excitation: 2 to 10 mA Maximum shock protection: 49 km/s2 Extension kit, accelerometer with 10 m
Spectral noise at: peak (5 000 g, pk) (32.8 ft.) integral cable and magnet
10 Hz: 27,0 g/Hz Electromagnetic sensitivity: CE [CMAC 105-K-10M]
100 Hz: 6,5 g/Hz Sealing welded: Hermetic Connection cable, 1,5 m (4.9 ft.) with M8
1 000 Hz: 2,5 g/Hz Submersible depth: 152 m (500 ft.) socket type connector for standard con-
Output impedance: <100 stant current 100 mV/g accelerometer
Bias output voltage: 7 to 14 V DC [CMAC 107]
Case isolation: >108 Ordering information
Replacement
Physical SKF Machine Condition Advisor Charger, international DC power supply,
Sensing element: PZT Ceramic CMAS 100-SL includes: +5 V, 1 600 mA, 90 to 264 V AC, 47 to
Sensing structure: Shear mode SKF Machine Condition Advisor unit 63 Hz [CMAC 8002]
Weight: 20 g (0.7 oz.) Belt holster [CMAC 102] Magnet, magnet base, 25,4 mm (1.0 in.)
Case material: 316L stainless steel Charger, international DC power supply diameter, 13,6 kg (30 lbs.) pull-strength
Mounting: 1/4-28 [CMAC 8004] [CMAC 109]
Resonant frequency: 1 920 000 CPM User manual, English hard copy Belt holster [CMAC 102]
(32 000 Hz) [32131800-EN]
Calibration certificate: CAL-Cert CD containing: Optional kits that includes the SKF
CMAC 105 User manual available in PDF files in Machine Condition Advisor, CMAS 100-SL
English, French, German, Portuguese, SKF Basic Condition Monitoring kit
Spanish and Swedish [CMAK 400-ML]
Link to training on SKF @ptitude SKF Electric Motor Assessment kit
Exchange [CMAK 200-EN]
SKF Bearing Assessment kit
[CMAK 300-SL]
SKF Energy Monitoring kit
Please contact:
[CMAK 450-ML]
SKF USA Inc.
Condition Monitoring Center San Diego SKF Advanced Bearing Analysis kit
5271 Viewridge Court San Diego, California 92123 USA [CMAK 600-EN]
Tel: +1 858-496-3400 Fax: +1 858-496-3531
Web Site: www.skf.com/cm
skf.com