Beruflich Dokumente
Kultur Dokumente
(J IS Z9 110-20 10)
LUXES (Ix) 3,000 2,000 1,500 1,000 750 500 300 200 150 100 75 50 30 20 15 10 7
Entrance hall (day-time) Inquiry office, Dining room
Director room Night-duty room
Stair - --
Council room Indoor emergency
OFFICE Electronic computer room
Library, Tea room staircase
Dressing room Warehouse, Lift, Passage
Reception room
Toilet, lavatory
Guard station
Stair --
Design room
FACTORY - - -- Extra fi ne visual work -- Contro l room,
Electri c room
Entrance
Passage Path
Indoor emergency
staircase
Drawing room Air conditioning machine
Warehouse
room, lavatory, Toilet
X-ray room
Physiotherapy room ,
Exercise machine room
Night-duty room
---- Ophthalmic dark room
Endoscopy room, X-ray
fluo roscopy room
-
Re ception room
Lift lobby, Escalator Passage , Resting room
- Most importan t
lavatory, Toilet I
STORE part of display 1- - Important part of display,
Negotiation roo m Stair
Register, Packaging stand
BEAUTY SALON Hair dressing, Hair dyeing Hair cut, Shaving Dressing
-- Stair
BARBAR SHOP Hair set, Make-up Shampooing, Reg ister Toilet inside the shop Passage
e Angular Incident Light Characteristic : N.OPERATION INSTRUCTIONS:
30' within 3%
60' within 10% 4.1 Power-On
INSTRUCTION MANUAL 90 within 30% Press "Power" switch to turn the light meter On or Off.
4.2 Selecting The Appropriate Range
e Operation t emperatu re I humidity:
Press "RANGE" switch to select 200,2000,20000 Lux.
O'C~SO 'C I below 80% R.H.(No Condensation)
4.3 Offset Adjustment
e storage temperature I humidity: To obta in the accurate data, please adjust "ZERO ADJ."
-1 O'C~60 C I below 70% R.H. (No Condensation)
with a screwdriver to enable LCD to indicate 000 if zero
e Power supply: cannot be shown on the screen.
Battery 9V NEDA 1604, IEC 6F22, JIS 006P 4.4 Light receiver Operation
Remove t he cover of the Light senso r. Ho ld the Light
e Dimension: sensor to apply the spot where the testing of source of
Meter:148mmX71mmX36mm
KYORI TSU Light receiver:85mm X67mm x 32mm light is to be conduct ed. The mete r will then conduct
ii DIGl~~~~r~~~ETER auto testing .
@
e Weight: Read the testing value after the readi ng indicated value
ZERO ADJ . Meter & Light receiver Approx.270g (including battery)
becomes stable.
e Package Content: (*Note: To elevate the accuracy of data p lease try to
Meter----------------------------------1 ho ld t he Light sensor to face the measuring li ght
Light receiver -----------------------1
9V Battery ---------------------------1
source vertically). e Overload Condition
DIGITAL LIGHT METER Instruction Manual -----------------1
4.5 Data-Hold Operation "When "OL" mark is d is p layed on the LCD, it means
sca le over and the user should se lect a proper
Leather Gift Box --------------------1 The user may hold the present reading and keep it on
measuring range for testing.
MODEL 5202 e Applicable standards:
IEC 61326-l(EMC)
the LCD display by pressing the "HOLD" button.
When the stored data is no longer needed, one may
*This meter is not suitable for measuring the light (such
as sunsh ine) when "OL" mark is displayed on the LCD
release the data-hold funct ion by pressing "HOLD" under when the maximum range 20000 Lux is selected.
KYORITSU ELECTRICAL INSTRUMENTS button again. *Please avoid to use the meter for measu rement under
the environmental circumstance of high temperature or
WORKS, LTD moisture.