Parameter Reference

3900 Series Base Station
V100R008C00(eNodeB)
Parameter Reference
Issue 12
Date 2014/09/29
HUAWEI TECHNOLOGIES CO., LTD.

Copyright Huawei Technologies Co., Ltd. 2014. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei
Technologies Co., Ltd.
Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of
products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherw
specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties
guarantees or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the preparation of this documen
ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty
any kind, express or implied.
Huawei Technologies Co., Ltd.

Huawei Industrial Base
Bantian, Longgang
Address:
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: support@huawei.com
rights reserved.
any form or by any means without prior written consent of Huawei
Technologies Co., Ltd.
ed in this document are the property of their respective holders.
by the contract made between Huawei and the customer. All or part of the
ay not be within the purchase scope or the usage scope. Unless otherwise
mmendations in this document are provided "AS IS" without warranties,
mplied.
notice. Every effort has been made in the preparation of this document to
on, and recommendations in this document do not constitute a warranty of
Purpose
This document describes the MO parameters of eNodeB For the details about the paramete
interconnection, see the eNodeB Parameter List.
Intended Audience
This document is intended for:
Network planners
System engineers
Field engineers
Shift operators
Site maintainers
Network operators
Parameter Attribute Description

The following table describes the attributes of each parameter.
Parameter Attribute
MO
Parameter ID
Parameter Name
NE
MML Command
Meaning
IsKey
Mandatory
Dynamic Attribute
Feature ID
Feature Name
Value Type
GUI Value Range
Enumeration Number/Bit
Unit
Actual Value Range
Default Value
Recommended Value
Initial Value Source

Impact
Parameter Relationship
Access
Service Interrupted After Modification
Interruption Scope
Interruption Duration (min)
Caution
Validation of Modification
Impact on Radio Network

Performance
Introduced in Version
Attribute
Disuse Statement
Applicable Mode
Change History
For detailed parameter changes, see the release notes.
Issue Date
12 2014/9/29
11 2014/8/27
10 2014/7/25
09 2014/6/6
08 2014/3/14
07 2013/12/23
06 2013/11/8
05 2013/8/26
04 2013/7/30
03 2013/6/27
02 2013/5/31
01 2013/4/28
Draft 2013/2/20
he MO parameters of eNodeB For the details about the parameters related to northbound interface
NodeB Parameter List.
scription
es the attributes of each parameter.
Description
Managed object of NE.
A simple character string used for identifying a parameter.
Name of a parameter.
NE Type of a product displayed on the OSS. The value can be BTS3900, BTS3900 WCDMA, or
BTS3900 LTE. BTS3900 indicates a co-MPT base station; BTS3900 WCDMA indicates a UMTS
base station; BTS3900 LTE indicates an LTE base station. These NE types are applicable to the
following base station models: DBS3900, BTS3900, BTS3900A, BTS3900L, BTS3900AL, and
BTS3900C.
Man Machine Language (MML) command related to the parameter.

Function of a parameter, protocol that defines the parameter, whether the parameter is an
advanced parameter.
Advanced parameters are not configured through northbound interfaces. To modify these
parameters, contact Huawei Customer Service Center for technical support.
If parameters meet one of the following conditions, they are treated as advanced parameters:
1. Parameters are temporarily introduced in a new feature or a customized feature to achieve
optimal network performance.
These parameters will have fixed values and will be deleted after the beta test or test at the
customized site.
2. Modifications to these parameters have a great impact on network KPIs or performance.
Normally, modifications of these parameters are not required for features. To achieve optimal
network performance, multiple parameters must be modified because modification of a single
parameter has little effect on the network and even may cause accidents, for example, service
interruption.
Whether the parameter is used to identify an MO instance.

Whether the parameter is mandatory for creating an MO instance.
Whether the parameter is dynamic for an MO. If the parameter is not dynamic, it can be added,
modified, or removed; if the parameter is dynamic, it cannot.
ID of the feature that uses the parameter.
Name of the feature that uses the parameter.
Type of a parameter value. For example, IP Address Type, Compound Type, Enumeration Type,
Interval Type, Bit Field Type, Character String Type, Wildcard Mask Type, Subnet Mask Type,
Password Type, Any Type, BCD Number Type, Struct.
Range of the parameter values displayed on the GUI.
The value of a string parameter cannot contain the following characters:
<>!?\/:;,=+%*"'|
Two or more percent signs (%) or spaces, +++ (start character of an MML message), or --- END
(end character of an MML message)
NULL or <NULL>, which indicates that an attribute of an MML message is null
ASCII control characters 0 to 31 (0x00 to 0x1F) and 127 (0x7F)
Spaces at both ends
Note: The value of the Directory, File Name, and URL parameters can contain a backslash (\) or
slash (/).
The value of a password parameter cannot contain the following characters:
Symbols ; , = " '
Key characters: two or more % symbols or spaces, +++ (start character of an MML message), or
--- END (end character of an MML message)
Enumeration number corresponding to the GUI value of a parameter of the enumeration type, or
bit position corresponding to the GUI value of a parameter of the bit field type. N/A is filled if the
parameter value is not enumeration type or bit field type.
Unit of a parameter value displayed on the GUI.
Range of the actual values corresponding to the parameter values displayed on the GUI.
Initial value assigned by the system for a parameter. For a mandatory parameter, no default value
is available. For a bit field parameter, if the value of a sub-parameter is ON, the bit representing
the sub-parameter is set to 1; if the value of a sub-parameter is OFF, the bit representing the sub-
parameter is set to 0. None indicates that no default value is available.
Generally, it is displayed on the configuration window of an ADD command but not displayed on
the configuration window of a MOD/RMV/DSP/LST/SET command.
Parameter values recommended for different scenarios.

Source for the initial configuration of a parameter. The initial value source can be:
Radio planning (Internal planning): The parameter value comes from the radio network plan,
facilitating resource management on the NE.
Radio planning (Negotiation with the peer): The parameter value comes from the radio network
plan. The NE negotiates this value with the peer device to ensure successful interworking.
Transport planning (Internal planning): The parameter value comes from the transport network
plan, facilitating resource management on the NE.
Transport planning (Negotiation with the peer): The parameter value comes from the transport
network plan. The NE negotiates this value with the peer device to ensure successful
interworking.
Equipment planning: The parameter value comes from the equipment plan.
Engineering design: The parameter value comes from the algorithm or function design.
Default/recommended value: The parameter value uses the default or recommended value,
where the recommended value is preferential. The default/recommended value can be used in
most scenarios and adjusted for a specific scenario.
N/A: The parameter value is not required.
Parameter impact scope.
Relationship with other parameters. For example, to use this parameter, you need to set related
Whether a parameter has one of the following properties:
Read/Write: The parameter can be added, deleted, or modified.
Read Only: The parameter can be added or deleted only.
Whether the parameter modification interrupts the ongoing services. One of the following
comments is provided:
Yes: The modification interrupts the ongoing services.
No (And no impact on the UE in idle mode): The modification does not interrupt the ongoing
services, and has no impact on the network access of UEs in idle mode.
No (For the UE in idle mode, ...): The modification does not interrupt the ongoing services, but
affects network access of UEs in idle mode...
N/A: This comment is used when a parameter cannot be modified.
Possible interruption scope.

Possible interruption duration (unit: minute).
Cautions to be taken during the modification.
How this parameter takes effect and whether the equipment needs to be restarted after the
modification. The parameter modification does not impact the equipment means that the
parameter takes effect immediately after the modification.
Impact of the parameter on radio network performance.
Product version in which the parameter is introduced.

Whether the parameter is a radio parameter, a transport parameter, or an equipment parameter.
Mechanism that the system uses to process a parameter value set by operators after the
parameter is out of service. The parameter will be deleted in later versions.
Indicates the applicable mode of a parameter.
G:The parameter is valid for GSM mode.
U:The parameter is valid for UMTS mode.
L:The parameter is valid for LTE mode.
If the parameter is applicable to multiple modes, the modes are separated by commas. For
example, if the parameter is applicable to GSM and UMTS, the value is G,U.
If a parameter not applicable to a mode is used, the services of the mode will not be affected
irrespective of whether the parameter setting is successful.
nges, see the release notes.
Description
Twelfth official release.
Eleventh official release.
Tenth official release.
Ninth official release.
Eighth official release.
Seventh official release.
Sixth official release.
Fifth official release.
Fourth official release.
Third official release.
Second official release.
First official release.
Draft
rameters related to northbound interface
parameter.
e value can be BTS3900, BTS3900 WCDMA, or

ase station; BTS3900 WCDMA indicates a UMTS
ase station. These NE types are applicable to the
900, BTS3900A, BTS3900L, BTS3900AL, and
ed to the parameter.
he parameter, whether the parameter is an
gh northbound interfaces. To modify these

Center for technical support.
ns, they are treated as advanced parameters:
ew feature or a customized feature to achieve
ll be deleted after the beta test or test at the
eat impact on network KPIs or performance.

e not required for features. To achieve optimal
t be modified because modification of a single
ven may cause accidents, for example, service
O instance.
g an MO instance.
f the parameter is not dynamic, it can be added,
mic, it cannot.
dress Type, Compound Type, Enumeration Type,
ype, Wildcard Mask Type, Subnet Mask Type,
Struct.
e GUI.
the following characters:
(start character of an MML message), or --- END
ute of an MML message is null

and 127 (0x7F)
d URL parameters can contain a backslash (\) or
tain the following characters:
ces, +++ (start character of an MML message), or
value of a parameter of the enumeration type, or

parameter of the bit field type. N/A is filled if the
ield type.
.
e parameter values displayed on the GUI.
meter. For a mandatory parameter, no default value
e of a sub-parameter is ON, the bit representing
ub-parameter is OFF, the bit representing the sub-
efault value is available.
indow of an ADD command but not displayed on
LST/SET command.
cenarios.
er. The initial value source can be:
meter value comes from the radio network plan,
The parameter value comes from the radio network

r device to ensure successful interworking.
parameter value comes from the transport network
NE.
er): The parameter value comes from the transport
h the peer device to ensure successful
mes from the equipment plan.

mes from the algorithm or function design.
value uses the default or recommended value,
The default/recommended value can be used in
ario.
e, to use this parameter, you need to set related
properties:
ted, or modified.
eted only.
he ongoing services. One of the following
rvices.
The modification does not interrupt the ongoing
cess of UEs in idle mode.
ation does not interrupt the ongoing services, but
cannot be modified.
e equipment needs to be restarted after the

es not impact the equipment means that the
odification.
rmance.
duced.
transport parameter, or an equipment parameter.
parameter value set by operators after the
be deleted in later versions.
, the modes are separated by commas. For

and UMTS, the value is G,U.
, the services of the mode will not be affected
successful.
MO Parameter ID Parameter Name NE MML Command
GTPU
ECHO Frame BTS3900, BTS3900 MOD GTPU

TIMEOUTTH Timeout LTE LST GTPU
GTPU
ECHO Frame BTS3900, BTS3900 MOD GTPU

TIMEOUTCNT Timeout Count LTE LST GTPU
GTPU
BTS3900, BTS3900 MOD GTPU
DSCP DSCP LTE LST GTPU
GTPU
BTS3900, BTS3900 MOD GTPU

STATICCHK Static Check Switch LTE LST GTPU
ADD CA
LST CA
CA BTS3900, BTS3900 MOD CA
Certificate Authority WCDMA, BTS3900 REQ DEVCERT
CANAME Name LTE RMV CA
CA
BTS3900, BTS3900 ADD CA

Certificate Authority WCDMA, BTS3900 MOD CA
URL URL LTE LST CA
CA

WCDMA, BTS3900 MOD CA
SIGNALG Signature Algorithm LTE LST CA
CA

Certificate Fetch WCDMA, BTS3900 MOD CA
MODE Mode LTE LST CA
CA

Certificate Update WCDMA, BTS3900 MOD CA
UPDSIP Source IP LTE LST CA
CA

CA URL During Site WCDMA, BTS3900 MOD CA
INITREQURL Deployment LTE LST CA
CA
Source IP for
Applying for a BTS3900, BTS3900 ADD CA
Certificate During WCDMA, BTS3900 MOD CA
INITREQSIP Site Deployment LTE LST CA
CERTREQ
BTS3900, BTS3900
WCDMA, BTS3900 MOD CERTREQ
COMMNAME Common Name LTE LST CERTREQ
CERTREQ
BTS3900, BTS3900
Common Name WCDMA, BTS3900 MOD CERTREQ
USERADDINFO Additional Info. LTE LST CERTREQ
CERTREQ
BTS3900, BTS3900
COUNTRY Country LTE LST CERTREQ
CERTREQ
BTS3900, BTS3900
ORG Organization LTE LST CERTREQ
CERTREQ
BTS3900, BTS3900
ORGUNIT Organizational Unit LTE LST CERTREQ
CERTREQ
BTS3900, BTS3900
STATEPROVINCE WCDMA, BTS3900 MOD CERTREQ
NAME State or Province LTE LST CERTREQ
CERTREQ
BTS3900, BTS3900
LOCALITY Locality LTE LST CERTREQ
CERTREQ
BTS3900, BTS3900 MOD CERTREQ

WCDMA, BTS3900 LST CERTFILE
KEYUSAGE Key Usage LTE LST CERTREQ
CERTREQ

SIGNALG Signature Algorithm LTE LST CERTREQ
CERTREQ BTS3900, BTS3900 MOD CERTREQ

WCDMA, BTS3900 UPD DEVCERT
KEYSIZE Key Size LTE LST CERTREQ
CERTREQ

LOCALNAME Local Name LTE LST CERTREQ
CERTREQ
BTS3900, BTS3900
LOCALIP Local IP LTE LST CERTREQ
CERTMK
ADD CERTMK
DSP CERTMK
REQ DEVCERT
RMV CERTMK
UPD DEVCERT
BTS3900, BTS3900 DSP
Certificate File WCDMA, BTS3900 CMPSESSION
APPCERT Name LTE LST CERTMK
CERTMK
BTS3900, BTS3900
WCDMA, BTS3900
STATUS Status LTE DSP CERTMK
BTS3900, BTS3900
CERTMK WCDMA, BTS3900
SERIALNO Serial Number LTE DSP CERTMK
BTS3900, BTS3900
CERTMK WCDMA, BTS3900 DSP CERTMK
COMMNAME Common Name LTE LST CERTFILE
BTS3900, BTS3900
CERTMK WCDMA, BTS3900 DSP CERTMK
ISSUER Issuer LTE LST CERTFILE
BTS3900, BTS3900
CERTMK WCDMA, BTS3900
DATE Expiration Date LTE DSP CERTMK
CERTMK BTS3900, BTS3900
WCDMA, BTS3900
EFFECTDATE Effective Date LTE DSP CERTMK
DSP APPCERT
APPCERT LST APPCERT
BTS3900, BTS3900 MOD APPCERT
WCDMA, BTS3900 TST APPCERT
APPTYPE Application Type LTE LST CERTTYPE
APPCERT
MOD APPCERT
BTS3900, BTS3900 TST APPCERT
Certificate File WCDMA, BTS3900 DSP APPCERT
APPCERT Name LTE LST APPCERT
BTS3900, BTS3900
APPCERT WCDMA, BTS3900
ISSUER Issuer LTE DSP APPCERT
APPCERT BTS3900, BTS3900

WCDMA, BTS3900
COMMNAME Common Name LTE DSP APPCERT

WCDMA, BTS3900
SERIALNO Serial Number LTE DSP APPCERT

WCDMA, BTS3900
DATE Expiration Date LTE DSP APPCERT
APPCERT
BTS3900, BTS3900
WCDMA, BTS3900
IKEPEER IKEPeer Name LTE TST APPCERT

WCDMA, BTS3900
EFFECTDATE Effective Date LTE DSP APPCERT

WCDMA, BTS3900
STATUS Status LTE DSP APPCERT

Application Type WCDMA, BTS3900
SUPPORTTYPE Supported By NE LTE None
CROSSCERT
ADD CROSSCERT
BTS3900, BTS3900 DSP CROSSCERT
Certificate File WCDMA, BTS3900 RMV CROSSCERT
CERTNAME Name LTE LST CROSSCERT
BTS3900, BTS3900
CROSSCERT WCDMA, BTS3900
SERIALNO Serial Number LTE DSP CROSSCERT
CROSSCERT BTS3900, BTS3900
WCDMA, BTS3900
COMMNAME Common Name LTE DSP CROSSCERT
BTS3900, BTS3900
CROSSCERT WCDMA, BTS3900
ISSUER Issuer Name LTE DSP CROSSCERT

WCDMA, BTS3900
DATE Expiring Date LTE DSP CROSSCERT

WCDMA, BTS3900
STATUS Status LTE DSP CROSSCERT

WCDMA, BTS3900
EFFECTDATE Effective Date LTE DSP CROSSCERT
TRUSTCERT
ADD TRUSTCERT
BTS3900, BTS3900 DSP TRUSTCERT
Certificate File WCDMA, BTS3900 RMV TRUSTCERT
CERTNAME Name LTE LST TRUSTCERT
BTS3900, BTS3900
TRUSTCERT WCDMA, BTS3900
SERIALNO Serial Number LTE DSP TRUSTCERT
TRUSTCERT BTS3900, BTS3900

WCDMA, BTS3900
COMMNAME Common Name LTE DSP TRUSTCERT
BTS3900, BTS3900
TRUSTCERT WCDMA, BTS3900
ISSUER Issuer Name LTE DSP TRUSTCERT
WCDMA, BTS3900
DATE Expiring Date LTE DSP TRUSTCERT

WCDMA, BTS3900
STATUS Status LTE DSP TRUSTCERT

WCDMA, BTS3900
EFFECTDATE Effective Date LTE DSP TRUSTCERT
CRL
ADD CRL
BTS3900, BTS3900 DSP CRL
WCDMA, BTS3900 RMV CRL
CERTNAME CRL File Name LTE LST CRL
CRL
BTS3900, BTS3900
WCDMA, BTS3900
STATUS Status LTE DSP CRL
BTS3900, BTS3900
CRL WCDMA, BTS3900
ISSUER Issuer LTE DSP CRL
BTS3900, BTS3900
CRL WCDMA, BTS3900
NEXTDATE Next Update LTE DSP CRL
BTS3900, BTS3900
CRL WCDMA, BTS3900
THISDATE This Update LTE DSP CRL
CRLTSK
BTS3900, BTS3900
WCDMA, BTS3900 ADD CRLTSK
IP IP Address LTE LST CRLTSK
CRLTSK BTS3900, BTS3900

USR User Name LTE LST CRLTSK

WCDMA, BTS3900
PWD Password LTE ADD CRLTSK
CRLTSK
BTS3900, BTS3900
PORT Port No. LTE LST CRLTSK
CRLTSK
BTS3900, BTS3900
FILENAME File Name LTE LST CRLTSK
CRLTSK
BTS3900, BTS3900
Using CRL's Next WCDMA, BTS3900 ADD CRLTSK
ISCRLTIME Update LTE LST CRLTSK
CRLTSK
BTS3900, BTS3900
CRL Updating WCDMA, BTS3900 ADD CRLTSK
PERIOD Period LTE LST CRLTSK
CRLTSK BTS3900, BTS3900 ADD CRLTSK

WCDMA, BTS3900 LST CRLTSK
TSKID Task ID LTE RMV CRLTSK

CRLGETMETHOD Access Method LTE LST CRLTSK
CRLTSK
BTS3900, BTS3900
SEARCHDN Distinguish Name LTE LST CRLTSK
CRLTSK
BTS3900, BTS3900
SIP Source IP LTE LST CRLTSK
CERTCHKTSK BTS3900, BTS3900
Certificate Validity WCDMA, BTS3900 SET CERTCHKTSK
ISENABLE Period Checking LTE LST CERTCHKTSK
CERTCHKTSK BTS3900, BTS3900

WCDMA, BTS3900 SET CERTCHKTSK
PERIOD Checking Period LTE LST CERTCHKTSK
CERTCHKTSK
BTS3900, BTS3900
ALMRNG Alarm Threshold LTE LST CERTCHKTSK
CERTCHKTSK
BTS3900, BTS3900
UPDATEMETHOD Update Method LTE LST CERTCHKTSK
CRLPOLICY
BTS3900, BTS3900
WCDMA, BTS3900 SET CRLPOLICY
CRLPOLICY CRL Using Policy LTE LST CRLPOLICY
ACL
ADD ACL
BTS3900, BTS3900 LST ACL
WCDMA, BTS3900 MOD ACL
ACLID ACL ID LTE RMV ACL
ACL
BTS3900, BTS3900
WCDMA, BTS3900 ADD ACL
VRFIDX VRF Index LTE LST ACL
ACL BTS3900, BTS3900 ADD ACL

ACLDESC Description LTE LST ACL
ACL
BTS3900, BTS3900 ADD ACL

CTRLMODE Control Mode LTE LST ACL
ACL
BTS3900, BTS3900
WCDMA, BTS3900
AUTOCFGFLAG Auto Config Flag LTE LST ACL
ACL6 ADD ACL6

LST ACL6
BTS3900, BTS3900 MOD ACL6
ACLID IPv6 ACL ID LTE RMV ACL6
ACL6 ADD ACL6

ACLDESC Description LTE LST ACL6
ACL6
ADD ACL6
CTRLMODE Control Mode LTE LST ACL6
ACL6
BTS3900, BTS3900
AUTOCFGFLAG Auto Config Flag LTE LST ACL6
ADD ACLRULE
ACLRULE BTS3900, BTS3900 LST ACLRULE
WCDMA, BTS3900 MOD ACLRULE
ACLID ACL ID LTE RMV ACLRULE
ADD ACLRULE
ACLRULE BTS3900, BTS3900 LST ACLRULE
RULEID Rule ID LTE RMV ACLRULE
ACLRULE
BTS3900, BTS3900
WCDMA, BTS3900 ADD ACLRULE
ACTION Action LTE LST ACLRULE
ACLRULE
BTS3900, BTS3900
PT Protocol Type LTE LST ACLRULE
ACLRULE
BTS3900, BTS3900 ADD ACLRULE

SIP Source IP Address LTE LST ACLRULE
ACLRULE

SWC Source Wildcard LTE LST ACLRULE
ACLRULE
BTS3900, BTS3900
SMPT Match Source Port LTE LST ACLRULE
ACLRULE
BTS3900, BTS3900
Source Port WCDMA, BTS3900 ADD ACLRULE
SOP Operate LTE LST ACLRULE
ACLRULE
BTS3900, BTS3900
SPT1 Source Port 1 LTE LST ACLRULE
ACLRULE
BTS3900, BTS3900
SPT2 Source Port 2 LTE LST ACLRULE
ACLRULE

Destination IP WCDMA, BTS3900 MOD ACLRULE
DIP Address LTE LST ACLRULE
ACLRULE

Destination WCDMA, BTS3900 MOD ACLRULE
DWC Wildcard LTE LST ACLRULE
ACLRULE
BTS3900, BTS3900
Match Destination WCDMA, BTS3900 ADD ACLRULE
DMPT Port LTE LST ACLRULE
ACLRULE
BTS3900, BTS3900
Destination Port WCDMA, BTS3900 ADD ACLRULE
DOP Operate LTE LST ACLRULE
ACLRULE
BTS3900, BTS3900
DPT1 Destination Port 1 LTE LST ACLRULE
ACLRULE
BTS3900, BTS3900
DPT2 Destination Port 2 LTE LST ACLRULE
ACLRULE
BTS3900, BTS3900
MDSCP Match DSCP LTE LST ACLRULE
ACLRULE BTS3900, BTS3900

DSCP DSCP LTE LST ACLRULE
ACLRULE
BTS3900, BTS3900
Match Fragment WCDMA, BTS3900 ADD ACLRULE
MFRG Message LTE LST ACLRULE
ACLRULE

CTRLMODE Control Mode LTE LST ACLRULE
ACLRULE

VLANIDOP VLAN ID Operate LTE LST ACLRULE
ACLRULE

VLANID1 VLAN ID 1 LTE LST ACLRULE
ACLRULE

VLANID2 VLAN ID 2 LTE LST ACLRULE
ACLRULE
BTS3900, BTS3900
WCDMA, BTS3900
AUTOCFGFLAG Auto Config Flag LTE LST ACLRULE
ACLRULE6 ADD ACLRULE6

LST ACLRULE6
BTS3900, BTS3900 MOD ACLRULE6
ACLID IPv6 ACL ID LTE RMV ACLRULE6
ADD ACLRULE6
ACLRULE6 LST ACLRULE6
RULEID IPv6 Rule ID LTE RMV ACLRULE6
ACLRULE6
BTS3900, BTS3900 ADD ACLRULE6

ACTION IPv6 ACL Action LTE LST ACLRULE6
ACLRULE6
PT Protocol Type LTE LST ACLRULE6

Source IPv6 BTS3900, BTS3900 MOD ACLRULE6
SIP Address LTE LST ACLRULE6
ACLRULE6
ADD ACLRULE6
Source Address BTS3900, BTS3900 MOD ACLRULE6
SPFXLEN Prefix Length LTE LST ACLRULE6
ACLRULE6
SMPT Match Source Port LTE LST ACLRULE6
ACLRULE6
Source Port BTS3900, BTS3900 ADD ACLRULE6

SOP Operate LTE LST ACLRULE6
ACLRULE6

SPT1 Source Port 1 LTE LST ACLRULE6
ACLRULE6

SPT2 Source Port 2 LTE LST ACLRULE6

Destination IPv6 BTS3900, BTS3900 MOD ACLRULE6
DIP Address LTE LST ACLRULE6
ACLRULE6
ADD ACLRULE6
Destination Address BTS3900, BTS3900 MOD ACLRULE6
DPFXLEN Prefix Length LTE LST ACLRULE6
ACLRULE6
Match Destination BTS3900, BTS3900 ADD ACLRULE6

DMPT Port LTE LST ACLRULE6
ACLRULE6
Destination Port BTS3900, BTS3900 ADD ACLRULE6

DOP Operate LTE LST ACLRULE6
ACLRULE6

DPT1 Destination Port 1 LTE LST ACLRULE6
ACLRULE6

DPT2 Destination Port 2 LTE LST ACLRULE6
ACLRULE6
MDSCP Match DSCP LTE LST ACLRULE6
ACLRULE6
DSCP DSCP LTE LST ACLRULE6
ACLRULE6
ADD ACLRULE6
CTRLMODE Control Mode LTE LST ACLRULE6
ACLRULE6
BTS3900, BTS3900
AUTOCFGFLAG Auto Config Flag LTE LST ACLRULE6
ADD BFDSESSION
DSP BFDSESSION
BFDSESSION MOD
BTS3900, BTS3900 BFDSESSION
WCDMA, BTS3900 RMV BFDSESSION
CN Cabinet No. LTE LST BFDSESSION
ADD BFDSESSION
DSP BFDSESSION
BFDSESSION MOD
SRN Subrack No. LTE LST BFDSESSION
ADD BFDSESSION
DSP BFDSESSION
BFDSESSION MOD
SN Slot No. LTE LST BFDSESSION
BFDSESSION
ADD BFDSESSION
DSP BFDSESSION
MOD
BFDSN Session ID LTE LST BFDSESSION
ADD BFDSESSION
BFDSESSION MOD
WCDMA, BTS3900 DSP BFDSESSION
VRFIDX VRF Index LTE LST BFDSESSION
BFDSESSION
ADD BFDSESSION
MOD
SRCIP Source IP LTE LST BFDSESSION
BFDSESSION
ADD BFDSESSION
MOD
DSTIP Destination IP LTE LST BFDSESSION
BFDSESSION
ADD BFDSESSION
MOD
HT Hop Type LTE LST BFDSESSION
ADD BFDSESSION
MOD
BFDSESSION BTS3900, BTS3900 BFDSESSION
MINTI Min TX Interval LTE LST BFDSESSION
ADD BFDSESSION
MOD
MINRI Min RX Interval LTE LST BFDSESSION
ADD BFDSESSION
MOD
DM Detection Multiplier LTE LST BFDSESSION
BFDSESSION
ADD BFDSESSION
MOD
CATLOG Session Catalog LTE LST BFDSESSION
BFDSESSION
BTS3900, BTS3900
WCDMA, BTS3900 ADD BFDSESSION
DSCP DSCP LTE LST BFDSESSION
BFDSESSION
BTS3900, BTS3900
WCDMA, BTS3900
CLEAR Clear Statistic LTE DSP BFDSESSION
BFDSESSION BTS3900, BTS3900

WCDMA, BTS3900
FSMSTATE Session State LTE DSP BFDSESSION
Active Detecting WCDMA, BTS3900
ACTUALMODE Mode LTE DSP BFDSESSION

ACTUALMINTXINT Active Minimum Tx WCDMA, BTS3900
ERVAL Interval LTE DSP BFDSESSION

ACTUALMINRXINT Active Minimum Rx WCDMA, BTS3900
ERVAL Interval LTE DSP BFDSESSION

ACTUALDETECTTI Active Detection WCDMA, BTS3900
ME Time LTE DSP BFDSESSION
BFDSESSION
BTS3900, BTS3900
MYDISCREAMINAT WCDMA, BTS3900
OR My Discriminator LTE DSP BFDSESSION
BTS3900, BTS3900
BFDSESSION YOURDISCREAMI WCDMA, BTS3900
NATOR Your Discriminator LTE DSP BFDSESSION

Number of TX WCDMA, BTS3900
TXPDUCOUNT PDUs LTE DSP BFDSESSION

Number of RX WCDMA, BTS3900
RXPDUCOUNT PDUs LTE DSP BFDSESSION
BTS3900, BTS3900
BFDSESSION UPTODOWNCOUN Total Number of Up WCDMA, BTS3900
T to Down Sessions LTE DSP BFDSESSION
BFDSESSION
BTS3900, BTS3900
WCDMA, BTS3900
DIAGNOSTIC Session Diagnosis LTE DSP BFDSESSION
ADD BFDSESSION
BFDSESSION BTS3900, BTS3900 MOD
WCDMA, BTS3900 BFDSESSION
VER Protocol Version LTE LST BFDSESSION
CERTDEPLOY
BTS3900, BTS3900 SET

Certification Deploy WCDMA, BTS3900 CERTDEPLOY
DEPLOYTYPE Position Type LTE LST CERTDEPLOY
CERTDEPLOY BTS3900, BTS3900 SET
WCDMA, BTS3900 CERTDEPLOY
CN Cabinet No. LTE LST CERTDEPLOY

SRN Subrack No. LTE LST CERTDEPLOY

SN Slot No. LTE LST CERTDEPLOY
CFMBNDIP BTS3900, BTS3900 ADD CFMBNDIP

WCDMA, BTS3900 RMV CFMBNDIP
MDNAME MD Name LTE LST CFMBNDIP
CFMBNDIP
BTS3900, BTS3900 ADD CFMBNDIP

MANAME MA Name LTE LST CFMBNDIP
CFMBNDIP WCDMA, BTS3900 RMV CFMBNDIP
RMEPID RMEP ID LTE LST CFMBNDIP
CFMBNDIP
VRFIDX VRF Index LTE LST CFMBNDIP
CFMBNDIP

BNDIP IP Address LTE LST CFMBNDIP
ADD CFMMA
CFMMA DSP CFMMA
BTS3900, BTS3900 MOD CFMMA
WCDMA, BTS3900 RMV CFMMA
MDNAME MD Name LTE LST CFMMA
CFMMA
ADD CFMMA
DSP CFMMA
BTS3900, BTS3900 MOD CFMMA
WCDMA, BTS3900 RMV CFMMA
MANAME MA Name LTE LST CFMMA
CFMMA BTS3900, BTS3900
WCDMA, BTS3900 ADD CFMMA
CN Cabinet No. LTE LST CFMMA

SRN Subrack No. LTE LST CFMMA

SN Slot No. LTE LST CFMMA
CFMMA BTS3900, BTS3900 ADD CFMMA

WCDMA, BTS3900 DSP CFMMA
BNDVLAN Binding VLAN LTE LST CFMMA
CFMMA BTS3900, BTS3900 ADD CFMMA

VLANID VLAN ID LTE LST CFMMA
ADD CFMMA
CFMMA BTS3900, BTS3900 MOD CFMMA
VLANPRI VLAN Priority LTE LST CFMMA
ADD CFMMA
CFMMA BTS3900, BTS3900 MOD CFMMA
CCMINTL CCM TX Interval LTE LST CFMMA
BTS3900, BTS3900
CFMMA WCDMA, BTS3900
MEPNUMBER Number of MEPs LTE DSP CFMMA
BTS3900, BTS3900
RMEPNUMBER Number of RMEPs LTE DSP CFMMA
BTS3900, BTS3900
MEPLIST MEP List LTE DSP CFMMA
BTS3900, BTS3900
RMEPLIST RMEP List LTE DSP CFMMA
CFMMD
ADD CFMMD
BTS3900, BTS3900 DSP CFMMD
WCDMA, BTS3900 RMV CFMMD
MDNAME MD Name LTE LST CFMMD
ADD CFMMD
DSP CFMMD
CFMMD DSP CFMMA
BTS3900, BTS3900 DSP CFMMEP
WCDMA, BTS3900 DSP CFMRMEP
LEVEL MD Level LTE LST CFMMD
BTS3900, BTS3900
CFMMD WCDMA, BTS3900
MANUMBER MA Number LTE DSP CFMMD
BTS3900, BTS3900
CFMMD WCDMA, BTS3900
MANAMELIST MA List LTE DSP CFMMD
ACT CFMCC
ACT ETHDM
ACT ETHLM
CFMMEP ADD CFMMEP
DEA CFMCC
WCDMA, BTS3900 RMV CFMMEP
MDNAME MD Name LTE LST CFMMEP
CFMMEP ACT CFMCC

ACT ETHDM
ACT ETHLM
ADD CFMMEP
DEA CFMCC
WCDMA, BTS3900 RMV CFMMEP
MANAME MA Name LTE LST CFMMEP
ACT CFMCC
ACT ETHDM
ACT ETHLM
ADD CFMMEP
CFMMEP DEA CFMCC
DSP CFMMEP
RMV CFMMEP
BTS3900, BTS3900 DSP ETHDM
WCDMA, BTS3900 DSP ETHLM
MEPID MEP ID LTE LST CFMMEP
CFMMEP BTS3900, BTS3900

WCDMA, BTS3900 ADD CFMMEP
CN Cabinet No. LTE LST CFMMEP

SRN Subrack No. LTE LST CFMMEP
SN Slot No. LTE LST CFMMEP
CFMMEP
BTS3900, BTS3900
SBT Subboard Type LTE LST CFMMEP
BTS3900, BTS3900
CFMMEP WCDMA, BTS3900 ADD CFMMEP
PT Port Type LTE LST CFMMEP
CFMMEP
BTS3900, BTS3900
PN Port No. LTE LST CFMMEP

WCDMA, BTS3900 DSP CFMMEP
CCSW CC Switch LTE LST CFMMEP
WCDMA, BTS3900
BINDINGVLAN Binding VLAN LTE DSP CFMMEP

WCDMA, BTS3900
VLANID VLAN ID LTE DSP CFMMEP

WCDMA, BTS3900
VLANPRI VLAN Priority LTE DSP CFMMEP

Number of TX CCM WCDMA, BTS3900
TXCCPDU PDUs LTE DSP CFMMEP

Number of RX CCM WCDMA, BTS3900
RXCCPDU PDUs LTE DSP CFMMEP

TXLBPDU Loopback PDUs LTE DSP CFMMEP
BTS3900, BTS3900
CFMMEP Number of RX WCDMA, BTS3900
RXLBPDU Loopback PDUs LTE DSP CFMMEP

Number of TX Link WCDMA, BTS3900
TXLTPDU Trace PDUs LTE DSP CFMMEP
BTS3900, BTS3900
CFMMEP Number of RX Link WCDMA, BTS3900
RXLTPDU Trace PDUs LTE DSP CFMMEP
BTS3900, BTS3900
CFMMEP WCDMA, BTS3900
TXDMMFRAMES Tx DMM Frames LTE DSP ETHDM
BTS3900, BTS3900
RXDMRFRAMES Rx DMR Frames LTE DSP ETHDM
CFMMEP
BTS3900, BTS3900
JITTERSTDDEVIAT WCDMA, BTS3900
ION Jitter Std Deviation LTE DSP ETHDM
WCDMA, BTS3900
RTTSUM RTT Sum LTE DSP ETHDM
CFMMEP Number of TX BTS3900, BTS3900

Success CFM WCDMA, BTS3900
TXSUCCCFMPDU PDUs LTE DSP CFMMEP
CFMMEP Number of RX BTS3900, BTS3900

Success CFM WCDMA, BTS3900
RXSUCCCFMPDU PDUs LTE DSP CFMMEP
CFMMEP Number of TX BTS3900, BTS3900

TXDROPPEDCFM Dropped CFM WCDMA, BTS3900
PDU PDUs LTE DSP CFMMEP
CFMMEP Number of RX BTS3900, BTS3900

RXDROPPEDCFM Dropped CFM WCDMA, BTS3900
PDU PDUs LTE DSP CFMMEP
CFMMEP
BTS3900, BTS3900
WCDMA, BTS3900
LOCALTXFRAMES Local Tx Frames LTE DSP ETHLM
CFMMEP
BTS3900, BTS3900
REMOTERXFRAM WCDMA, BTS3900
ES Remote Rx Frames LTE DSP ETHLM
CFMMEP
BTS3900, BTS3900
REMOTETXFRAM WCDMA, BTS3900
ES Remote Tx Frames LTE DSP ETHLM
CFMMEP
BTS3900, BTS3900
WCDMA, BTS3900
LOCALRXFRAMES Local Rx Frames LTE DSP ETHLM
CFMMEP
BTS3900, BTS3900
DOWNLOSTFRAM WCDMA, BTS3900
ES Down Lost Frames LTE DSP ETHLM
CFMMEP
BTS3900, BTS3900
UPPERLOSTFRAM WCDMA, BTS3900
ES Upper Lost Frames LTE DSP ETHLM
BTS3900, BTS3900
TXLMMFRAMES Tx LMM Frames LTE DSP ETHLM
BTS3900, BTS3900
RXLMRFRAMES Rx LMR Frames LTE DSP ETHLM

MEASUREMENTS WCDMA, BTS3900 DSP ETHDM
TATE Measurement State LTE DSP ETHLM
CFMRMEP ADD CFMRMEP

BTS3900, BTS3900 DSP CFMRMEP
WCDMA, BTS3900 RMV CFMRMEP
MDNAME MD Name LTE LST CFMRMEP
CFMRMEP
ADD CFMRMEP
BTS3900, BTS3900 DSP CFMRMEP
WCDMA, BTS3900 RMV CFMRMEP
MANAME MA Name LTE LST CFMRMEP
ACT ETHDM
ACT ETHLM
ADD CFMRMEP
CFMRMEP DSP CFMRMEP
RMV CFMRMEP
BTS3900, BTS3900 DSP ETHDM
WCDMA, BTS3900 DSP ETHLM
RMEPID RMEP ID LTE LST CFMRMEP
CFMRMEP
BTS3900, BTS3900 ADD CFMRMEP

WCDMA, BTS3900 DSP CFMRMEP
MAC MAC Address LTE LST CFMRMEP
BTS3900, BTS3900
CFMRMEP WCDMA, BTS3900
STATUS Status LTE DSP CFMRMEP
CFMRMEP BTS3900, BTS3900

Actual MAC WCDMA, BTS3900
ACTUALMAC Address LTE DSP CFMRMEP

WCDMA, BTS3900
BINDINGVLAN Binding VLAN LTE DSP CFMRMEP
WCDMA, BTS3900
VLANID VLAN ID LTE DSP CFMRMEP

Number of RX CCM WCDMA, BTS3900
RXCCMPDU PDUs LTE DSP CFMRMEP

Number of Bound WCDMA, BTS3900
IPNUMBER IPs LTE DSP CFMRMEP

WCDMA, BTS3900
IPLIST IP Address List LTE DSP CFMRMEP
ADD CPBEARER
DSP CPBEARER
CPBEARER BTS3900, BTS3900 MOD CPBEARER
WCDMA, BTS3900 RMV CPBEARER
CPBEARID CP Bear No. LTE LST CPBEARER
ADD CPBEARER
CPBEARER DSP CPBEARER
BTS3900, BTS3900 MOD CPBEARER
WCDMA, BTS3900 RMV CPBEARER
FLAG Flag LTE LST CPBEARER
CPBEARER
ADD CPBEARER
WCDMA, BTS3900 DSP CPBEARER
BEARTYPE Bear Type LTE LST CPBEARER
CPBEARER
ADD CPBEARER
WCDMA, BTS3900 DSP CPBEARER
LINKNO Link No. LTE LST CPBEARER
BTS3900, BTS3900
CPBEARER WCDMA, BTS3900
CPSTATUS Port Status LTE DSP CPBEARER
BTS3900, BTS3900
CPBEARER WCDMA, BTS3900
USEDSTATE Used Status LTE DSP CPBEARER
CPBEARER
BTS3900, BTS3900 ADD CPBEARER

WCDMA, BTS3900 MOD CPBEARER
CTRLMODE Control Mode LTE LST CPBEARER
CPBEARER
BTS3900, BTS3900
WCDMA, BTS3900
AUTOCFGFLAG Auto Config Flag LTE LST CPBEARER
ADD DEVIP
DEVIP BTS3900, BTS3900 DSP DEVIP
WCDMA, BTS3900 RMV DEVIP
CN Cabinet No. LTE LST DEVIP
ADD DEVIP
SRN Subrack No. LTE LST DEVIP
ADD DEVIP
SN Slot No. LTE LST DEVIP
DEVIP
ADD DEVIP
BTS3900, BTS3900 RMV DEVIP
WCDMA, BTS3900 DSP DEVIP
SBT Subboard Type LTE LST DEVIP
DEVIP
ADD DEVIP
PT Port Type LTE LST DEVIP
DEVIP
ADD DEVIP
PN Port No. LTE LST DEVIP
DEVIP
ADD DEVIP
VRFIDX VRF Index LTE LST DEVIP
DEVIP
ADD DEVIP
IP IP Address LTE LST DEVIP
DEVIP
BTS3900, BTS3900 ADD DEVIP

MASK Mask LTE LST DEVIP
ADD DEVIP6
DEVIP6 DSP DEVIP6
BTS3900, BTS3900 RMV DEVIP6
ITFIDX Interface Index LTE LST DEVIP6
ADD DEVIP6
DEVIP6 RMV DEVIP6
BTS3900, BTS3900 DSP DEVIP6
IPV6 IPv6 Address LTE LST DEVIP6
DEVIP6 ADD DEVIP6

BTS3900, BTS3900 DSP DEVIP6
PFXLEN Prefix Length LTE LST DEVIP6
DEVIP6
BTS3900, BTS3900
ADDRESSSTATUS Address Status LTE DSP DEVIP6
DEVIP6
BTS3900, BTS3900
VALIDLIFETIME Valid Lifetime LTE DSP DEVIP6
DEVIP6
PREFERREDLIFET BTS3900, BTS3900

IME Preferred Lifetime LTE DSP DEVIP6
DHCPRELAYSWITC SET
DHCPRELAYSWIT
CH
BTS3900, BTS3900 LST
WCDMA, BTS3900 DHCPRELAYSWIT
ES DHCP Relay Switch LTE CH
DHCPSVRIP
BTS3900, BTS3900 ADD DHCPSVRIP
DHCP Server IP WCDMA, BTS3900 RMV DHCPSVRIP
DHCPSVRIP Address LTE LST DHCPSVRIP
DHCPSW
OMCH Auto- BTS3900, BTS3900
Establishment WCDMA, BTS3900 SET DHCPSW
SWITCH Switch LTE LST DHCPSW
DHCPSW BTS3900, BTS3900

WCDMA, BTS3900 SET DHCPSW
VLANSCANSW Vlanscan Switch LTE LST DHCPSW
DIFPRI
BTS3900, BTS3900
WCDMA, BTS3900 SET DIFPRI
PRIRULE Priority Rule LTE LST DIFPRI
DIFPRI
BTS3900, BTS3900
SIGPRI Signaling Priority LTE LST DIFPRI
DIFPRI
BTS3900, BTS3900
OMHIGHPRI OM High Priority LTE LST DIFPRI
DIFPRI
BTS3900, BTS3900
OMLOWPRI OM Low Priority LTE LST DIFPRI
DIFPRI
BTS3900, BTS3900
IPCLKPRI IP Clock Priority LTE LST DIFPRI
DOT1X ACT DOT1X

BTS3900, BTS3900 DEA DOT1X
WCDMA, BTS3900 DSP DOT1X
CN Cabinet No. LTE LST DOT1X
DOT1X ACT DOT1X

SRN Subrack No. LTE LST DOT1X
DOT1X ACT DOT1X
SN Slot No. LTE LST DOT1X
DOT1X ACT DOT1X

SBT Subboard Type LTE LST DOT1X
DOT1X
ACT DOT1X
PN Port No. LTE LST DOT1X
DOT1X
BTS3900, BTS3900 ACT DOT1X

AM Authentic Method LTE LST DOT1X
DOT1X BTS3900, BTS3900

Abnormal Packet WCDMA, BTS3900
APN Number LTE DSP DOT1X

WCDMA, BTS3900
AFN Fail Number LTE DSP DOT1X
DOT1X
BTS3900, BTS3900
WCDMA, BTS3900
AFR Fail Reason LTE DSP DOT1X
DOT1X
BTS3900, BTS3900
Receive EAP WCDMA, BTS3900
RPN Packet Number LTE DSP DOT1X
DOT1X
BTS3900, BTS3900
WCDMA, BTS3900
AR Authentic State LTE DSP DOT1X
DOT1X
BTS3900, BTS3900
Send EAP Packet WCDMA, BTS3900
SPN Number LTE DSP DOT1X

Authentic Succeed WCDMA, BTS3900
ASN Number LTE DSP DOT1X
BTS3900, BTS3900 DSP DSCPMAP
DSCPMAP WCDMA, BTS3900 LST DSCPMAP
VRFIDX VRF Index LTE SET DSCPMAP
DSCPMAP BTS3900, BTS3900 DSP DSCPMAP

Differentiated WCDMA, BTS3900 LST DSCPMAP
DSCP Service Codepoint LTE SET DSCPMAP
DSCPMAP BTS3900, BTS3900 SET DSCPMAP

WCDMA, BTS3900 DSP DSCPMAP
VLANPRIO VLAN Priority LTE LST DSCPMAP
ADD BACKE1T1
ADD E1T1
CHK E1T1CRS
DSP E1T1
E1T1
RMV BACKE1T1
RMV E1T1
BTS3900, BTS3900 SET E1T1
WCDMA, BTS3900 LST BACKE1T1
CN Cabinet No. LTE LST E1T1
ADD BACKE1T1
ADD E1T1
CHK E1T1CRS
DSP E1T1
E1T1 RMV BACKE1T1
RMV E1T1
SRN Subrack No. LTE LST E1T1
ADD BACKE1T1
ADD E1T1
CHK E1T1CRS
DSP E1T1
E1T1
RMV BACKE1T1
RMV E1T1
SN Slot No. LTE LST E1T1
ADD BACKE1T1
ADD E1T1
CHK E1T1CRS
DSP E1T1
E1T1 RMV BACKE1T1
RMV E1T1
PN Port No. LTE LST E1T1
ADD E1T1
E1T1 DSP E1T1
BTS3900, BTS3900 RMV E1T1
WCDMA, BTS3900 SET E1T1
PS Port Selection LTE LST E1T1
E1T1
BTS3900, BTS3900 ADD E1T1

WORKMODE Work Mode LTE LST E1T1
E1T1

FRAME Frame Format LTE LST E1T1
E1T1

LNCODE Line Code LTE LST E1T1
E1T1
ADD E1T1
WCDMA, BTS3900 DSP E1T1
CLKM Clock Mode LTE LST E1T1
E1T1
BTS3900, BTS3900 ADD BACKE1T1
WCDMA, BTS3900 DSP DHCPRSLT
DSTSN Destination Slot No. LTE LST BACKE1T1
E1T1
BTS3900, BTS3900
LINKRUNNINGSTA Link Running WCDMA, BTS3900
TUS Status LTE DSP E1T1
E1T1
BTS3900, BTS3900
EXECUTELINKTES Link Test Execution WCDMA, BTS3900
TFLAG Status LTE DSP E1T1
BTS3900, BTS3900
E1T1 WCDMA, BTS3900
USEDFLAG Used Flag LTE DSP E1T1
BTS3900, BTS3900
E1T1 WCDMA, BTS3900
LOOPLEFTTIME Loop Left Time LTE DSP E1T1
E1T1
ADD BACKE1T1
ADD E1T1
CHK E1T1CRS
DSP E1T1
RMV BACKE1T1
RMV E1T1
SBT Subboard Type LTE LST E1T1
E1T1
BTS3900, BTS3900
ACTUALWORKMO WCDMA, BTS3900 DSP DHCPRSLT
DE Actual Work Mode LTE DSP E1T1
E1T1
BTS3900, BTS3900
ACTUALFRAMEFO Actual Frame WCDMA, BTS3900 DSP DHCPRSLT
RMAT Format LTE DSP E1T1
E1T1
BTS3900, BTS3900
ACTUALLINECOD WCDMA, BTS3900 DSP DHCPRSLT
E Actual Line Code LTE DSP E1T1
E1T1BER BTS3900, BTS3900

E1/T1 BER WCDMA, BTS3900 SET E1T1BER
BTL Threshold Level LTE LST E1T1BER
EP2RSCGRP
BTS3900, BTS3900 ADD EP2RSCGRP

WCDMA, BTS3900 RMV EP2RSCGRP
MT Mapping Type LTE LST EP2RSCGRP
EP2RSCGRP

ENDPOINTID End Point ID LTE LST EP2RSCGRP
EP2RSCGRP
CN Cabinet No. LTE LST EP2RSCGRP
EP2RSCGRP
SRN Subrack No. LTE LST EP2RSCGRP
EP2RSCGRP
SN Slot No. LTE LST EP2RSCGRP
EP2RSCGRP

SBT Subboard Type LTE LST EP2RSCGRP
EP2RSCGRP

PT Bearing Port Type LTE LST EP2RSCGRP
EP2RSCGRP

PN Bearing Port No. LTE LST EP2RSCGRP
EP2RSCGRP Transmission BTS3900, BTS3900 ADD EP2RSCGRP

Resource Group WCDMA, BTS3900 RMV EP2RSCGRP
BEAR Bear Type LTE LST EP2RSCGRP
EP2RSCGRP BTS3900, BTS3900 ADD EP2RSCGRP

Transmission WCDMA, BTS3900 RMV EP2RSCGRP
RSCGRPID Resource Group ID LTE LST EP2RSCGRP
EP2RSCGRP
BTS3900, BTS3900
WCDMA, BTS3900 ADD EP2RSCGRP
USERLABEL User Label LTE LST EP2RSCGRP
ADD EPGROUP
ADD
SCTPHOST2EPGR
P
ADD
SCTPPEER2EPGR
P
ADD
UPHOST2EPGRP
ADD
UPPEER2EPGRP
LST EPGROUP
LST
SCTPHOST2EPGR
P
EPGROUP LST
SCTPPEER2EPGR
P
LST
UPHOST2EPGRP
LST
UPPEER2EPGRP
MOD EPGROUP
RMV EPGROUP
RMV
SCTPHOST2EPGR
P
RMV
SCTPPEER2EPGR
P
RMV
BTS3900, BTS3900 UPHOST2EPGRP
WCDMA, BTS3900 RMV
EPGROUPID End Point Group ID LTE UPPEER2EPGRP
EPGROUP BTS3900, BTS3900 ADD EPGROUP

WCDMA, BTS3900 MOD EPGROUP
VRFIDX VRF Index LTE LST EPGROUP
EPGROUP
BTS3900, BTS3900
SCTPHOSTREFS SCTP Host ID List LTE None
ADD
SCTPHOST2EPGR
P
RMV
EPGROUP SCTPHOST2EPGR
P
SCTPHOSTREF.S WCDMA, BTS3900 SCTPHOST2EPGR
CTPHOSTID SCTP Host ID LTE P
EPGROUP
BTS3900, BTS3900
SCTPHOSTLIST SCTP Host List LTE LST EPGROUP
EPGROUP
BTS3900, BTS3900
SCTPPEERREFS SCTP Peer ID List LTE None
ADD
SCTPPEER2EPGR
P
RMV
EPGROUP SCTPPEER2EPGR
P
SCTPPEERREF.SC WCDMA, BTS3900 SCTPPEER2EPGR
TPPEERID SCTP Peer ID LTE P
EPGROUP
BTS3900, BTS3900
SCTPPEERLIST SCTP Peer List LTE LST EPGROUP
EPGROUP BTS3900, BTS3900

USERPLANEHOST User Plane Host ID WCDMA, BTS3900
REFS List LTE None
ADD
UPHOST2EPGRP
EPGROUP RMV
BTS3900, BTS3900 UPHOST2EPGRP
USERPLANEHOST WCDMA, BTS3900 LST
REF.UPHOSTID User Plane Host ID LTE UPHOST2EPGRP

USERPLANEHOST User Plane Host WCDMA, BTS3900
LIST List LTE LST EPGROUP

USERPLANEPEER User Plane Peer ID WCDMA, BTS3900
REFS List LTE None
ADD
UPPEER2EPGRP
EPGROUP RMV
BTS3900, BTS3900 UPPEER2EPGRP
USERPLANEPEER WCDMA, BTS3900 LST
REF.UPPEERID User Plane Peer ID LTE UPPEER2EPGRP
USERPLANEPEER User Plane Peer WCDMA, BTS3900
LIST List LTE LST EPGROUP
EPGROUP
BTS3900, BTS3900 ADD EPGROUP

PACKETFILTERSW WCDMA, BTS3900 MOD EPGROUP
ITCH Packet Filter Switch LTE LST EPGROUP
EPGROUP BTS3900, BTS3900 ADD EPGROUP

WCDMA, BTS3900 MOD EPGROUP
USERLABEL User Label LTE LST EPGROUP
ACT ETHOAM3AH
ETHOAM3AH BTS3900, BTS3900 DEA ETHOAM3AH
WCDMA, BTS3900 DSP ETHOAM3AH
CN Cabinet No. LTE LST ETHOAM3AH
ACT ETHOAM3AH
SRN Subrack No. LTE LST ETHOAM3AH
ACT ETHOAM3AH
SN Slot No. LTE LST ETHOAM3AH
ETHOAM3AH
ACT ETHOAM3AH
BTS3900, BTS3900 DEA ETHOAM3AH
SBT Subboard Type LTE LST ETHOAM3AH
ACT ETHOAM3AH
PT Port Type LTE LST ETHOAM3AH
ETHOAM3AH
ACT ETHOAM3AH
BTS3900, BTS3900 DEA ETHOAM3AH
PN Port No. LTE LST ETHOAM3AH
ETHOAM3AH
BTS3900, BTS3900
WCDMA, BTS3900 ACT ETHOAM3AH
WORKMODE Work Mode LTE LST ETHOAM3AH
ETHOAM3AH
BTS3900, BTS3900
DTPRD Detection Period LTE LST ETHOAM3AH
BTS3900, BTS3900
ETHOAM3AH WCDMA, BTS3900 ACT ETHOAM3AH
PDUSIZE PDU Size LTE LST ETHOAM3AH
ETHOAM3AH
BTS3900, BTS3900
RMTLBFLG Loopback Flag LTE LST ETHOAM3AH
BTS3900, BTS3900
ETHOAM3AH WCDMA, BTS3900 ACT ETHOAM3AH
FLTINDFLG Fault Report Flag LTE LST ETHOAM3AH
ETHOAM3AH BTS3900, BTS3900

Error Frame Event WCDMA, BTS3900 ACT ETHOAM3AH
ERRFRMEVTPRD Duration LTE LST ETHOAM3AH
ETHOAM3AH
BTS3900, BTS3900
Error Frame Event WCDMA, BTS3900 ACT ETHOAM3AH
ERRFRMEVTTHD Threshold LTE LST ETHOAM3AH
ETHOAM3AH
Error Frame BTS3900, BTS3900

ERRFRMSCDEVT Seconds Summary WCDMA, BTS3900 ACT ETHOAM3AH
PRD Event Duration LTE LST ETHOAM3AH
ETHOAM3AH
Error Frame BTS3900, BTS3900

ERRFRMSCDEVTT Seconds Summary WCDMA, BTS3900 ACT ETHOAM3AH
HD Event Threshold LTE LST ETHOAM3AH
ETHOAM3AH
BTS3900, BTS3900
WCDMA, BTS3900
FSMSTATE Current State LTE DSP ETHOAM3AH
ETHOAM3AH Number of RX BTS3900, BTS3900

RXDROPOAMPDU Dropped WCDMA, BTS3900
COUNT OAMPDUs LTE DSP ETHOAM3AH
BTS3900, BTS3900
ETHOAM3AH RXEVENTOAMPD Number of RX WCDMA, BTS3900
UCOUNT Event OAMPDUs LTE DSP ETHOAM3AH
BTS3900, BTS3900
ETHOAM3AH RXFAULTOAMPDU Number of RX Fault WCDMA, BTS3900

RXINFOOAMPDUC Information WCDMA, BTS3900
OUNT OAMPDUs LTE DSP ETHOAM3AH

RXLOOPBACKOA Loopback Control WCDMA, BTS3900
MPDUCOUNT OAMPDUs LTE DSP ETHOAM3AH
ETHOAM3AH
BTS3900, BTS3900
RXTOTALOAMPDU Total Number of RX WCDMA, BTS3900
ETHOAM3AH Number of TX BTS3900, BTS3900

TXDROPOAMPDU Dropped WCDMA, BTS3900
ETHOAM3AH
BTS3900, BTS3900
TXEVENTOAMPD Number of TX WCDMA, BTS3900
UCOUNT Event OAMPDUs LTE DSP ETHOAM3AH
ETHOAM3AH
BTS3900, BTS3900
TXFAULTOAMPDU Number of TX Fault WCDMA, BTS3900
ETHOAM3AH
Number of TX BTS3900, BTS3900

TXINFOOAMPDUC Information WCDMA, BTS3900
OUNT OAMPDUs LTE DSP ETHOAM3AH
ETHOAM3AH
Number of TX BTS3900, BTS3900

TXLOOPBACKOA Loopback Control WCDMA, BTS3900
MPDUCOUNT OAMPDUs LTE DSP ETHOAM3AH
ETHOAM3AH
BTS3900, BTS3900
TXTOTALOAMPDU Total Number of TX WCDMA, BTS3900
ADD ETHPORT
DSP ETHPORT
ETHPORT RMV ETHPORT
BTS3900, BTS3900 RST ETHPORT
WCDMA, BTS3900 SET ETHPORT
CN Cabinet No. LTE LST ETHPORT
ADD ETHPORT
DSP ETHPORT
ETHPORT RMV ETHPORT
SRN Subrack No. LTE LST ETHPORT
ADD ETHPORT
DSP ETHPORT
ETHPORT RMV ETHPORT
SN Slot No. LTE LST ETHPORT
ETHPORT
ADD ETHPORT
DSP ETHPORT
RMV ETHPORT
SBT Subboard Type LTE LST ETHPORT
ETHPORT
ADD ETHPORT
DSP ETHPORT
RMV ETHPORT
PN Port No. LTE LST ETHPORT
ETHPORT
ADD ETHPORT
SET ETHPORT
BTS3900, BTS3900 DSP DHCPRSLT
WCDMA, BTS3900 DSP ETHPORT
PA Port Attribute LTE LST ETHPORT
ETHPORT
ADD ETHPORT
BTS3900, BTS3900 SET ETHPORT
Maximum WCDMA, BTS3900 DSP ETHPORT
MTU Transmission Unit LTE LST ETHPORT
ETHPORT
ADD ETHPORT
SPEED Speed LTE LST ETHPORT
ETHPORT
ADD ETHPORT
DUPLEX Duplex LTE LST ETHPORT
ETHPORT
ADD ETHPORT
ARPPROXY ARP Proxy LTE LST ETHPORT
ETHPORT
ADD ETHPORT
FC Flow Control LTE LST ETHPORT
ETHPORT
MAC Frame Error BTS3900, BTS3900 ADD ETHPORT

Rate Occur WCDMA, BTS3900 SET ETHPORT
FERAT Threshold LTE LST ETHPORT
ETHPORT
MAC Frame Error BTS3900, BTS3900 ADD ETHPORT

Rate Clear WCDMA, BTS3900 SET ETHPORT
FERDT Threshold LTE LST ETHPORT
ETHPORT
BTS3900, BTS3900
WCDMA, BTS3900
MAC MAC Address LTE DSP ETHPORT
BTS3900, BTS3900
ETHPORT WCDMA, BTS3900
PORTSTATUS Port Status LTE DSP ETHPORT
BTS3900, BTS3900
ETHPORT LOOPBACKSTATU WCDMA, BTS3900
S Loopback Status LTE DSP ETHPORT
ETHPORT
BTS3900, BTS3900
INLOOPBACKTES In Loopback Mode WCDMA, BTS3900
TMODE or Not LTE DSP ETHPORT
BTS3900, BTS3900
ETHPORT OAM3AHENABLEF Ethernet OAM 3AH WCDMA, BTS3900
LAG Flag LTE DSP ETHPORT
ETHPORT BTS3900, BTS3900

RXPACKETS Packets LTE DSP ETHPORT

RXBYTES Bytes LTE DSP ETHPORT

Number of RX CRC WCDMA, BTS3900
RXCRCERROR Error Packets LTE DSP ETHPORT
BTS3900, BTS3900
RXFLOWRATE RX Traffic LTE DSP ETHPORT

TXPACKETS Packets LTE DSP ETHPORT

TXBYTES Bytes LTE DSP ETHPORT
BTS3900, BTS3900
TXFLOWRATE TX Traffic LTE DSP ETHPORT

WCDMA, BTS3900
IPNUM Number of IPs LTE DSP ETHPORT
WCDMA, BTS3900
IPLIST IP Address List LTE DSP ETHPORT

LOCCFGNEGOMO Local Configuration WCDMA, BTS3900
DE Negotiation Mode LTE DSP ETHPORT
BTS3900, BTS3900
ETHPORT LOCREALNEGOM Local Actual WCDMA, BTS3900
ODE Negotiation Mode LTE DSP ETHPORT
ETHPORT
BTS3900, BTS3900
WCDMA, BTS3900
LOCSPEED Local Speed LTE DSP ETHPORT
ETHPORT
BTS3900, BTS3900
WCDMA, BTS3900
LOCDUPLEX Local Duplex LTE DSP ETHPORT

Peer Actual WCDMA, BTS3900
PEERNEGOMODE Negotiation Mode LTE DSP ETHPORT
ETHPORT
BTS3900, BTS3900
WCDMA, BTS3900
PEERSPEED Peer Speed LTE DSP ETHPORT
ETHPORT
BTS3900, BTS3900
WCDMA, BTS3900
PEERDUPLEX Peer Duplex LTE DSP ETHPORT
ETHPORT
BTS3900, BTS3900 ADD ETHPORT

RXBCPKTALMOCR Rx Broadcast Pkts WCDMA, BTS3900 SET ETHPORT
THD Alarm Occur Thd LTE LST ETHPORT
ETHPORT

RXBCPKTALMCLR Rx Broadcast Pkts WCDMA, BTS3900 SET ETHPORT
THD Alarm Clear Thd LTE LST ETHPORT

Physical Layer WCDMA, BTS3900
PHYLAYERSTAT Status LTE DSP ETHPORT
ETHPORT

USERLABEL User Label LTE LST ETHPORT
ADD ETHTRK
DSP ETHTRK
ETHTRK MOD ETHTRK
BTS3900, BTS3900 RMV ETHTRK
WCDMA, BTS3900 RST ETHTRK
CN Cabinet No. LTE LST ETHTRK
ADD ETHTRK
DSP ETHTRK
ETHTRK MOD ETHTRK
SRN Subrack No. LTE LST ETHTRK
ADD ETHTRK
DSP ETHTRK
ETHTRK MOD ETHTRK
SN Slot No. LTE LST ETHTRK
ETHTRK
ADD ETHTRK
DSP ETHTRK
MOD ETHTRK
TN Trunk No. LTE LST ETHTRK
ETHTRK
ADD ETHTRK
MOD ETHTRK
BTS3900, BTS3900 DSP DHCPRSLT
WCDMA, BTS3900 DSP ETHTRK
LACP Trunk Type LTE LST ETHTRK
ETHTRK
ADD ETHTRK
BTS3900, BTS3900 MOD ETHTRK
WCDMA, BTS3900 DSP ETHTRK
ARPPROXY ARP Proxy LTE LST ETHTRK
ETHTRK
ADD ETHTRK
DSP ETHTRK
MOD ETHTRK
SBT Subboard Type LTE LST ETHTRK
ETHTRK
ADD ETHTRK
BTS3900, BTS3900 MOD ETHTRK
Max Transmission WCDMA, BTS3900 DSP ETHTRK
MTU Unit LTE LST ETHTRK
ETHTRK
BTS3900, BTS3900
ETHTRUNKSTATU Ethernet Trunk WCDMA, BTS3900
S Status LTE DSP ETHTRK
ETHTRK
BTS3900, BTS3900
WCDMA, BTS3900
LOCALMAC Local MAC Address LTE DSP ETHTRK
ETHTRK
BTS3900, BTS3900
Peer System MAC WCDMA, BTS3900
PEERSYSMAC Address LTE DSP ETHTRK
ETHTRK BTS3900, BTS3900

ETHTRUNKLINKN Number of Ethernet WCDMA, BTS3900
UM Trunk Ports LTE DSP ETHTRK

ETHTRUNKLINKID Ethernet Trunk Port WCDMA, BTS3900 DSP ETHTRK
S No. LTE LST ETHTRK

ETHTRUNKLINKU Number of Active WCDMA, BTS3900
PNUM Trunk Ports LTE DSP ETHTRK

ETHTRUNKLINKU Active Trunk Port WCDMA, BTS3900
PIDS No. LTE DSP ETHTRK
ETHTRK
BTS3900, BTS3900
RXPACKETS Packets LTE DSP ETHTRK
ETHTRK
BTS3900, BTS3900
RXBYTES Bytes LTE DSP ETHTRK

RXDROPPEDPAC Number of RX WCDMA, BTS3900
KETS Dropped Packets LTE DSP ETHTRK

RXDROPPEDBYTE Number of RX WCDMA, BTS3900
S Dropped Bytes LTE DSP ETHTRK
ETHTRK
BTS3900, BTS3900
TXPACKETS Packets LTE DSP ETHTRK
ETHTRK
BTS3900, BTS3900
TXBYTES Bytes LTE DSP ETHTRK

TXDROPPEDPACK Number of TX WCDMA, BTS3900
ETS Dropped Packets LTE DSP ETHTRK

TXDROPPEDBYTE Number of TX WCDMA, BTS3900
S Dropped Bytes LTE DSP ETHTRK

WCDMA, BTS3900
IPNUM Number of IPs LTE DSP ETHTRK
BTS3900, BTS3900
ETHTRK WCDMA, BTS3900
IPLIST IP Address List LTE DSP ETHTRK
ETHTRKLNK ADD ETHTRKLNK

BTS3900, BTS3900 DSP ETHTRKLNK
WCDMA, BTS3900 RMV ETHTRKLNK
CN Cabinet No. LTE LST ETHTRKLNK
SRN Subrack No. LTE LST ETHTRKLNK

SN Slot No. LTE LST ETHTRKLNK
ADD ETHTRKLNK
ETHTRKLNK BTS3900, BTS3900 DSP ETHTRKLNK
TN Trunk No. LTE LST ETHTRKLNK
ETHTRKLNK
ADD ETHTRKLNK
PN Port No. LTE LST ETHTRKLNK
ETHTRKLNK
BTS3900, BTS3900 ADD ETHTRKLNK
WCDMA, BTS3900 DSP ETHTRKLNK
PRI Port Priority LTE LST ETHTRKLNK
ETHTRKLNK
BTS3900, BTS3900
WCDMA, BTS3900 ADD ETHTRKLNK
FLAG Master Flag LTE LST ETHTRKLNK
ETHTRKLNK
ADD ETHTRKLNK
SBT Subboard Type LTE LST ETHTRKLNK
ETHTRKLNK BTS3900, BTS3900

WCDMA, BTS3900
PORTSTATUS Port Status LTE DSP ETHTRKLNK
ETHTRKLNK
BTS3900, BTS3900
WCDMA, BTS3900
MAC MAC Address LTE DSP ETHTRKLNK
ETHTRKLNK
BTS3900, BTS3900
LOCALTIMEOUTM Local Timeout WCDMA, BTS3900
ODE Mode LTE DSP ETHTRKLNK

PEERTIMEOUTMO WCDMA, BTS3900
DE Peer Timeout Mode LTE DSP ETHTRKLNK

RXLACPPACKETS LACP Packets LTE DSP ETHTRKLNK
ETHTRKLNK
BTS3900, BTS3900
TXLACPPACKETS LACP Packets LTE DSP ETHTRKLNK
ADD
FLOODDEFEND
DSP
FLOODDEFEND
FLOODDEFEND MOD
FLOODDEFEND
RMV
BTS3900, BTS3900 FLOODDEFEND
WCDMA, BTS3900 LST
FLDTYPE Flood Type LTE FLOODDEFEND
ADD
FLOODDEFEND
FLOODDEFEND MOD
WCDMA, BTS3900 LST
DFDSW Defend Switch LTE FLOODDEFEND
FLOODDEFEND
ADD
FLOODDEFEND
MOD
WCDMA, BTS3900 LST
DFDTHD Defend Threshold LTE FLOODDEFEND
ADD
FLOODDEFEND
FLOODDEFEND MOD
WCDMA, BTS3900 LST
ALMSW Alarm Switch LTE FLOODDEFEND
FLOODDEFEND
ADD
FLOODDEFEND
MOD
WCDMA, BTS3900 LST
ALMTHD Alarm Threshold LTE FLOODDEFEND
FLOODDEFEND
BTS3900, BTS3900
Number of Flood WCDMA, BTS3900 DSP
PACKETS Droped Packets LTE FLOODDEFEND
BTS3900, BTS3900
FLOODDEFEND Receive Total WCDMA, BTS3900 DSP
RCVTOTALPKT packets LTE FLOODDEFEND
GTRANSPARA
Resource Group BTS3900, BTS3900 SET

Scheduling Weight WCDMA, BTS3900 GTRANSPARA
LPSCHSW Switch LTE LST GTRANSPARA
GTRANSPARA

WCDMA, BTS3900 GTRANSPARA
RATECFGTYPE Rate Config Type LTE LST GTRANSPARA
GTRANSPARA

SBTIME Switch Back Time LTE LST GTRANSPARA
GTRANSPARA

ARPAGINGTIME ARP Aging Time LTE LST GTRANSPARA
GTRANSPARA
SET
BTS3900, BTS3900 PINGFILTERMODE
WCDMA, BTS3900 LST
MODE Ping Filter Mode LTE PINGFILTERMODE
GTRANSPARA Number of Packets

Discarded Due to BTS3900, BTS3900
Fragmentation WCDMA, BTS3900
BATCHFAILPKT Failures LTE DSP IPSTAT
Total Number of
Encrypted Packets
GTRANSPARA Received at the IP BTS3900, BTS3900
INENCRYPTEDPK Layer of the WCDMA, BTS3900
T Receiver LTE DSP IPSTAT
Number of Packets
GTRANSPARA Successfully
Decrypted at the IP BTS3900, BTS3900
INDECRYPTSUCC Layer of the WCDMA, BTS3900
EEDPKT Receiver LTE DSP IPSTAT
Total Number of
Packets Failed in
GTRANSPARA ESP Decryption at BTS3900, BTS3900
INESPDECRYPTF the IP Layer of the WCDMA, BTS3900
AILPKT Receiver Hardware LTE DSP IPSTAT
Total Number of
Packets Failed in
GTRANSPARA AH Authentication
at the IP Layer of BTS3900, BTS3900
INAHAUTHFAILPK the Receiver WCDMA, BTS3900
T Hardware LTE DSP IPSTAT
Total Number of
Packets Discarded
GTRANSPARA at the IP Layer of
the Receiver Due to BTS3900, BTS3900
INSHOULDNOTEN Having Been WCDMA, BTS3900
CRYPTEDPKT Encrypted LTE DSP IPSTAT
Total Number of
GTRANSPARA Packets Received
by the Decryption BTS3900, BTS3900
Module of the WCDMA, BTS3900
INTOTALPKT Receiver LTE DSP IPSTAT
GTRANSPARA Number of Failing BTS3900, BTS3900

INDECRYPTFAILP Decrypted Packets WCDMA, BTS3900
KT at the Receiver LTE DSP IPSTAT
Total Number of IKE
GTRANSPARA Packets Received BTS3900, BTS3900
at the IP Layer of WCDMA, BTS3900
INIKEPKT the Receiver LTE DSP IPSTAT
Total Number of
Packets Discarded
INWRONGSIPENC Invalid Source IP WCDMA, BTS3900
RYPTEDPKT Addresses LTE DSP IPSTAT
Total Number of
GTRANSPARA Packets Discarded
INANTIREPLAYDR the Receiver Due to WCDMA, BTS3900
OPPKT Replay Attacks LTE DSP IPSTAT
Total Number of
INSAMISSDROPP the Receiver Due to WCDMA, BTS3900
KT No Inbound SA LTE DSP IPSTAT
Total Number of
Packets Discarded
INUNSUPPORTAH Unsupported AH WCDMA, BTS3900
ALGDROPPKT Algorithm LTE DSP IPSTAT
Total Number of
Packets Discarded
INUNSUPPORTES Unsupported ESP WCDMA, BTS3900
PALGDROPPKT Algorithm LTE DSP IPSTAT
Total Number of
Plain Packets
GTRANSPARA Received at the IP BTS3900, BTS3900
INUNENCRYPTED Layer of the WCDMA, BTS3900
PKT Receiver LTE DSP IPSTAT
Number of Packets
GTRANSPARA Discarded at the IP
Layer of the BTS3900, BTS3900
INSHOULDENCRY Receiver Due to not WCDMA, BTS3900
PTEDPKT Being Encrypted LTE DSP IPSTAT
Number of Packets
GTRANSPARA Successfully
Encrypted at the IP BTS3900, BTS3900
OUTENCRYPTSU Layer of the WCDMA, BTS3900
CCEEDPKT Transmitter LTE DSP IPSTAT
Total Number of
Packets Failed to
GTRANSPARA Be Encrypted at the BTS3900, BTS3900
OUTENCRYPTFAIL IP Layer of the WCDMA, BTS3900
PKT Transmitter LTE DSP IPSTAT
Total Number of
Packets Received
GTRANSPARA by the Encryption BTS3900, BTS3900
Module of the WCDMA, BTS3900
OUTTOTALPKT Transmitter LTE DSP IPSTAT
Number of Packets
GTRANSPARA That Should be BTS3900, BTS3900
OUTNEEDENCRY Encrypted at the WCDMA, BTS3900
PTPKT Transmitter LTE DSP IPSTAT
Total Number of
OUTSAMISSDROP the Transmitter due WCDMA, BTS3900
PKT to No Outbound SA LTE DSP IPSTAT
Total Number of
Packets Discarded
the Transmitter Due BTS3900, BTS3900
OUTUNSUPPORTA to Unsupported AH WCDMA, BTS3900
HALGDROPPKT Algorithm LTE DSP IPSTAT
Total Number of
Packets Discarded
the Transmitter Due BTS3900, BTS3900
OUTUNSUPPORT to Unsupported WCDMA, BTS3900
ESPALGDROPPKT ESP Algorithm LTE DSP IPSTAT
Total Number of
Packets Failed in
GTRANSPARA AH Authentication
OUTAHAUTHFAILP the Transmitter WCDMA, BTS3900
KT Hardware LTE DSP IPSTAT
Total Number of
Packets Failed in
GTRANSPARA ESP Encryption at BTS3900, BTS3900
OUTESPDECRYPT the IP Layer of the WCDMA, BTS3900
FAILPKT Transmitter LTE DSP IPSTAT
Total Number of
OUTSEQOVERFL the Transmitter Due WCDMA, BTS3900
OWDROPPKT to SN Overflow LTE DSP IPSTAT
Total Number of
Packets That
GTRANSPARA Should Not Have
Been Encrypted at BTS3900, BTS3900
OUTNONEEDENC the IP Layer of the WCDMA, BTS3900
RYPTPKT Transmitter LTE DSP IPSTAT
Total Number of IKE
GTRANSPARA Packets Sent at the BTS3900, BTS3900
IP Layer of the WCDMA, BTS3900
OUTIKEPKT Transmitter LTE DSP IPSTAT
GTRANSPARA
BTS3900, BTS3900
WCDMA, BTS3900 SET ETHOAM
OAMTYPE Ethernet OAM Type LTE LST ETHOAM
GTRANSPARA
BTS3900, BTS3900
WCDMA, BTS3900 SET ETHOAM
MONITORPOLICY Monitor Policy LTE LST ETHOAM
SET
IPSECBYPASSCF
GTRANSPARA G
DSP
IPSECBYPASSCF
G
IPSec Bypass WCDMA, BTS3900 IPSECBYPASSCF
BYPASSSWITCH Switch LTE G
SET
IPSECBYPASSCF
G
DSP
GTRANSPARA IPSECBYPASSCF
G
WCDMA, BTS3900 IPSECBYPASSCF
PWD IPSec Bypass Code LTE G
GTRANSPARA WCDMA, BTS3900 IPSECBYPASSCF
STATUS IPSec Status LTE G
GTRANSPARA
MSTSEGWIP Master SeGW IP LTE G
GTRANSPARA
SLVSEGWIP Slave SeGW IP LTE G
GTRANSPARA

OMCHSWITCHBA WCDMA, BTS3900 GTRANSPARA
CK OMCH Switch Back LTE LST GTRANSPARA
GTRANSPARA

OMCHSBWAITTIM OMCH Switch Back WCDMA, BTS3900 GTRANSPARA
E Wait Time LTE LST GTRANSPARA
GTRANSPARA
SCTP Fault Real- BTS3900, BTS3900 SET

time Reporting WCDMA, BTS3900 GTRANSPARA
SCTPRTRPTSW Switch LTE LST GTRANSPARA
HAGRP
BTS3900, BTS3900
WCDMA, BTS3900
CN Cabinet No. LTE LST HAGRP
HAGRP
BTS3900, BTS3900
WCDMA, BTS3900
SRN Subrack No. LTE LST HAGRP
HAGRP
BTS3900, BTS3900
WCDMA, BTS3900
SN Logic Slot No. LTE LST HAGRP
IKECFG BTS3900, BTS3900 SET IKECFG

WCDMA, BTS3900 DSP IKECFG
IKELNM Local Name LTE LST IKECFG
IKECFG
BTS3900, BTS3900 SET IKECFG

IKEKLI Keepalive Interval LTE LST IKECFG
IKECFG
BTS3900, BTS3900 SET IKECFG

IKEKLT Keepalive Timeout LTE LST IKECFG
IKECFG BTS3900, BTS3900 SET IKECFG

DSCP DSCP LTE LST IKECFG
BTS3900, BTS3900
IKECFG WCDMA, BTS3900
CABINETNO Cabinet No. LTE DSP IKECFG
BTS3900, BTS3900
SUBRACKNO Subrack No. LTE DSP IKECFG
BTS3900, BTS3900
SLOTNO Slot No. LTE DSP IKECFG
IKEPEER
ADD IKEPEER
DSP IKEPEER
BTS3900, BTS3900 LST IKEPEER
WCDMA, BTS3900 MOD IKEPEER
PEERNAME IKE Peer Name LTE RMV IKEPEER
ADD IKEPEER
IKEPEER BTS3900, BTS3900 MOD IKEPEER
WCDMA, BTS3900 DSP IKEPEER
PROPID IKE Proposal ID LTE LST IKEPEER
IKEPEER
ADD IKEPEER
BTS3900, BTS3900 MOD IKEPEER
IKEVERSION Version LTE LST IKEPEER
IKEPEER
ADD IKEPEER
EXCHMODE Exchange Mode LTE LST IKEPEER
IKEPEER
ADD IKEPEER
IDTYPE Local ID Type LTE LST IKEPEER
IKEPEER ADD IKEPEER
REMOTEIP Remote IP Address LTE LST IKEPEER
IKEPEER
ADD IKEPEER
REMOTENAME Remote Name LTE LST IKEPEER
IKEPEER
ADD IKEPEER
PKEY Pre-shared Key LTE LST IKEPEER
ADD IKEPEER
IKEPEER BTS3900, BTS3900 MOD IKEPEER
DPD DPD Mode LTE LST IKEPEER
IKEPEER
ADD IKEPEER
DPDIDLETIME DPD Idle Time LTE LST IKEPEER
IKEPEER
ADD IKEPEER
DPD BTS3900, BTS3900 MOD IKEPEER
Retransmission WCDMA, BTS3900 DSP IKEPEER
DPDRETRI Interval LTE LST IKEPEER
ADD IKEPEER
IKEPEER DPD BTS3900, BTS3900 MOD IKEPEER
Retransmission WCDMA, BTS3900 DSP IKEPEER
DPDRETRN Count LTE LST IKEPEER
IKEPEER
BTS3900, BTS3900 ADD IKEPEER

WCDMA, BTS3900 MOD IKEPEER
CTRLMODE Control Mode LTE LST IKEPEER
IKEPEER
ADD IKEPEER
LOCALIP Local IP Address LTE LST IKEPEER
BTS3900, BTS3900
IKEPEER WCDMA, BTS3900
CABINETNO Cabinet No. LTE DSP IKEPEER
BTS3900, BTS3900
SUBRACKNO Subrack No. LTE DSP IKEPEER
BTS3900, BTS3900
SLOTNO Slot No. LTE DSP IKEPEER
IKEPEER
BTS3900, BTS3900
WCDMA, BTS3900
AUTOCFGFLAG Auto Config Flag LTE LST IKEPEER
IKEPEER6
ADD IKEPEER6
DSP IKEPEER6
LST IKEPEER6
IPv6 IKE Peer BTS3900, BTS3900 MOD IKEPEER6
PEERNAME Name LTE RMV IKEPEER6
ADD IKEPEER6
IKEPEER6 MOD IKEPEER6
BTS3900, BTS3900 DSP IKEPEER6
PROPID IKE Proposal ID LTE LST IKEPEER6
IKEPEER6
ADD IKEPEER6
MOD IKEPEER6
IKEVERSION Version LTE LST IKEPEER6
IKEPEER6
ADD IKEPEER6
MOD IKEPEER6
EXCHMODE Exchange Mode LTE LST IKEPEER6
IKEPEER6
ADD IKEPEER6
MOD IKEPEER6
IDTYPE Local ID Type LTE LST IKEPEER6
IKEPEER6 ADD IKEPEER6

MOD IKEPEER6
Remote IPv6 BTS3900, BTS3900 DSP IKEPEER6
REMOTEIP Address LTE LST IKEPEER6
IKEPEER6
ADD IKEPEER6
MOD IKEPEER6
REMOTENAME Remote Name LTE LST IKEPEER6
IKEPEER6
ADD IKEPEER6
MOD IKEPEER6
PKEY Pre-shared Key LTE LST IKEPEER6
ADD IKEPEER6
IKEPEER6 MOD IKEPEER6
DPD DPD Mode LTE LST IKEPEER6
IKEPEER6
ADD IKEPEER6
MOD IKEPEER6
DPDIDLETIME DPD Idle Time LTE LST IKEPEER6
IKEPEER6
ADD IKEPEER6
DPD MOD IKEPEER6
Retransmission BTS3900, BTS3900 DSP IKEPEER6
DPDRETRI Interval LTE LST IKEPEER6
IKEPEER6 ADD IKEPEER6

DPD MOD IKEPEER6
Retransmission BTS3900, BTS3900 DSP IKEPEER6
DPDRETRN Count LTE LST IKEPEER6
IKEPEER6
ADD IKEPEER6
BTS3900, BTS3900 MOD IKEPEER6
CTRLMODE Control Mode LTE LST IKEPEER6
IKEPEER6
ADD IKEPEER6
MOD IKEPEER6
LOCALIP Local IPv6 Address LTE LST IKEPEER6
IKEPEER6
BTS3900, BTS3900
CABINETNO Cabinet No. LTE DSP IKEPEER6
IKEPEER6
BTS3900, BTS3900
SUBRACKNO Subrack No. LTE DSP IKEPEER6
IKEPEER6 BTS3900, BTS3900

SLOTNO Slot No. LTE DSP IKEPEER6
IKEPEER6
BTS3900, BTS3900
AUTOCFGFLAG Auto Config Flag LTE LST IKEPEER6
ADD
IKEPROPOSAL
DSP
IKEPROPOSAL
IKEPROPOSAL LST
IKEPROPOSAL
MOD
BTS3900, BTS3900 IKEPROPOSAL
WCDMA, BTS3900 RMV
PROPID Proposal ID LTE IKEPROPOSAL
IKEPROPOSAL
ADD
IKEPROPOSAL
MOD
IKEPROPOSAL
DSP
Encryption WCDMA, BTS3900 LST
ENCALG Algorithm LTE IKEPROPOSAL
IKEPROPOSAL
ADD
IKEPROPOSAL
MOD
IKEPROPOSAL
DSP
Authentication WCDMA, BTS3900 LST
AUTHALG Algorithm LTE IKEPROPOSAL
ADD
IKEPROPOSAL
MOD
IKEPROPOSAL IKEPROPOSAL
DSP
Authentication WCDMA, BTS3900 LST
AUTHMETH Method LTE IKEPROPOSAL
IKEPROPOSAL
ADD
IKEPROPOSAL
MOD
IKEPROPOSAL
DSP
Diffie-Hellman WCDMA, BTS3900 LST
DHGRP Group LTE IKEPROPOSAL
IKEPROPOSAL
ADD
IKEPROPOSAL
MOD
IKEPROPOSAL
DSP
ISAKMP SA WCDMA, BTS3900 LST
DURATION Duration LTE IKEPROPOSAL
IKEPROPOSAL ADD
IKEPROPOSAL
MOD
IKEPROPOSAL
DSP
WCDMA, BTS3900 LST
PRFALG PRF Algorithm LTE IKEPROPOSAL
IKEPROPOSAL BTS3900, BTS3900

WCDMA, BTS3900 DSP
CABINETNO Cabinet No. LTE IKEPROPOSAL

WCDMA, BTS3900 DSP
SUBRACKNO Subrack No. LTE IKEPROPOSAL

WCDMA, BTS3900 DSP
SLOTNO Slot No. LTE IKEPROPOSAL
IP2RSCGRP BTS3900, BTS3900 ADD IP2RSCGRP

WCDMA, BTS3900 RMV IP2RSCGRP
MAPIDX Mapping Index LTE LST IP2RSCGRP
IP2RSCGRP
BTS3900, BTS3900
WCDMA, BTS3900 ADD IP2RSCGRP
CN Cabinet No. LTE LST IP2RSCGRP
IP2RSCGRP
BTS3900, BTS3900
SRN Subrack No. LTE LST IP2RSCGRP
IP2RSCGRP
BTS3900, BTS3900
SN Slot No. LTE LST IP2RSCGRP
IP2RSCGRP
Transmission BTS3900, BTS3900
Resource Group WCDMA, BTS3900 ADD IP2RSCGRP
BEAR Bear Type LTE LST IP2RSCGRP
IP2RSCGRP
BTS3900, BTS3900
SBT Subboard Type LTE LST IP2RSCGRP
IP2RSCGRP
BTS3900, BTS3900
PT Bearing Port Type LTE LST IP2RSCGRP
IP2RSCGRP
BTS3900, BTS3900
PN Bearing Port No. LTE LST IP2RSCGRP
IP2RSCGRP
BTS3900, BTS3900
Transmission WCDMA, BTS3900 ADD IP2RSCGRP
RSCGRPID Resource Group ID LTE LST IP2RSCGRP
IP2RSCGRP
BTS3900, BTS3900
VRFIDX VRF Index LTE LST IP2RSCGRP
IP2RSCGRP
BTS3900, BTS3900
DSTIP Destination IP LTE LST IP2RSCGRP
IP2RSCGRP
BTS3900, BTS3900
DSTMASK Mask LTE LST IP2RSCGRP
IP2RSCGRP6
ADD IP2RSCGRP6
BTS3900, BTS3900 RMV IP2RSCGRP6
CN Cabinet No. LTE LST IP2RSCGRP6
IP2RSCGRP6
ADD IP2RSCGRP6
SRN Subrack No. LTE LST IP2RSCGRP6
IP2RSCGRP6
ADD IP2RSCGRP6
SN Slot No. LTE LST IP2RSCGRP6
IP2RSCGRP6
ADD IP2RSCGRP6
SBT Subboard Type LTE LST IP2RSCGRP6
IP2RSCGRP6
ADD IP2RSCGRP6
PT Bearing Port Type LTE LST IP2RSCGRP6
IP2RSCGRP6
ADD IP2RSCGRP6
PN Bearing Port No. LTE LST IP2RSCGRP6
IP2RSCGRP6
Transmission ADD IP2RSCGRP6
Resource Group BTS3900, BTS3900 RMV IP2RSCGRP6
BEAR Bear Type LTE LST IP2RSCGRP6
IP2RSCGRP6
ADD IP2RSCGRP6
Transmission BTS3900, BTS3900 RMV IP2RSCGRP6
RSCGRPID Resource Group ID LTE LST IP2RSCGRP6
IP2RSCGRP6
ADD IP2RSCGRP6
Destination IPv6 BTS3900, BTS3900 RMV IP2RSCGRP6
DSTIPV6 Address LTE LST IP2RSCGRP6
IP2RSCGRP6
ADD IP2RSCGRP6
PFXLEN Prefix Length LTE LST IP2RSCGRP6
IPGUARD
BTS3900, BTS3900
ARPSPOOFCHKS ARP Spoofing WCDMA, BTS3900 SET IPGUARD
W Check Switch LTE LST IPGUARD
IPGUARD
BTS3900, BTS3900
ARPSPOOFALMTH ARP Spoofing WCDMA, BTS3900 SET IPGUARD
D Alarm Threshold LTE LST IPGUARD
IPGUARD
BTS3900, BTS3900
ARPLRNSTRICTS ARP Learning Strict WCDMA, BTS3900 SET IPGUARD
W Switch LTE LST IPGUARD
IPGUARD
BTS3900, BTS3900
INVALIDPKTCHKS Invalid Packet WCDMA, BTS3900 SET IPGUARD
W Check Switch LTE LST IPGUARD
IPGUARD
BTS3900, BTS3900
INVALIDPKTALMT WCDMA, BTS3900 SET IPGUARD
HD Alarm Threshold LTE LST IPGUARD
IPGUARD BTS3900, BTS3900

IPSECREPLAYCH IPSec Replay Alarm WCDMA, BTS3900 SET IPGUARD
KSW Switch LTE LST IPGUARD
IPSECREPLAYALM IPSec Replay Alarm WCDMA, BTS3900 SET IPGUARD
THD Threshold LTE LST IPGUARD
IPGUARD
BTS3900, BTS3900
WCDMA, BTS3900 DSP
PT Port Type LTE INVALIDPKTINFO
BTS3900, BTS3900
IPGUARD WCDMA, BTS3900 DSP
PN Port No. LTE INVALIDPKTINFO
Source MAC BTS3900, BTS3900
IPGUARD Address of Invalid WCDMA, BTS3900 DSP
SRCMACADDR Packet LTE INVALIDPKTINFO
IPGUARD Destination MAC BTS3900, BTS3900

Address of Invalid WCDMA, BTS3900 DSP
DSTMACADDR Packet LTE INVALIDPKTINFO
BTS3900, BTS3900
IPGUARD VLAN ID of Invalid WCDMA, BTS3900 DSP
VLANID Packet LTE INVALIDPKTINFO
IPGUARD
BTS3900, BTS3900
MACLAYERPROTO Protocol Type of WCDMA, BTS3900 DSP
COL MAC Layer LTE INVALIDPKTINFO
IPGUARD
BTS3900, BTS3900
WCDMA, BTS3900 DSP
VRFIDX VRF Index LTE INVALIDPKTINFO
BTS3900, BTS3900
IPGUARD Source IP Address WCDMA, BTS3900 DSP
SRCIP of Invalid Packet LTE INVALIDPKTINFO
IPGUARD Destination IP BTS3900, BTS3900

Address of Invalid WCDMA, BTS3900 DSP
DSTIP Packet LTE INVALIDPKTINFO
IPGUARD
BTS3900, BTS3900
IPLAYERPROTOC Protocol Type of IP WCDMA, BTS3900 DSP
OL Layer LTE INVALIDPKTINFO
BTS3900, BTS3900
IPGUARD Source Port of WCDMA, BTS3900 DSP
SRCPORT Invalid Packet LTE INVALIDPKTINFO

Destination Port of WCDMA, BTS3900 DSP
DSTPORT Invalid Packet LTE INVALIDPKTINFO
BTS3900, BTS3900
IPGUARD WCDMA, BTS3900 DSP
PACKETDATA Invalid Packet Data LTE INVALIDPKTINFO
ADD IPITF6
IPITF6 DSP IPITF6
BTS3900, BTS3900 RMV IPITF6
ITFIDX Interface Index LTE LST IPITF6
IPITF6 ADD IPITF6

BTS3900, BTS3900 DSP IPITF6
ITFTYPE Interface Type LTE LST IPITF6
IPITF6
ADD IPITF6
CN Cabinet No. LTE LST IPITF6
IPITF6 ADD IPITF6

SRN Subrack No. LTE LST IPITF6
IPITF6 ADD IPITF6

SN Slot No. LTE LST IPITF6
IPITF6 ADD IPITF6

SBT Subboard Type LTE LST IPITF6
IPITF6 ADD IPITF6
PT Port Type LTE LST IPITF6
IPITF6
ADD IPITF6
PN Port No. LTE LST IPITF6
IPITF6 ADD IPITF6

VLANID VLAN ID LTE LST IPITF6
IPITF6 ADD IPITF6

Maximum BTS3900, BTS3900 DSP IPITF6
MTU Transmission Unit LTE LST IPITF6
IPITF6 BTS3900, BTS3900

ITFSTATUS Interface Status LTE DSP IPITF6
IPITF6 BTS3900, BTS3900

LINKLOCALADDR Link Local Address LTE DSP IPITF6
IPITF6
GLOBALADDRNU Global Unicast BTS3900, BTS3900
M Address Number LTE DSP IPITF6
IPITF6
Global Unicast BTS3900, BTS3900
GLOBALADDR Address(es) LTE DSP IPITF6
IPITF6
MULTICASTADDR Multicast Address BTS3900, BTS3900
NUM Number LTE DSP IPITF6
IPITF6
Multicast BTS3900, BTS3900
MULTICASTADDR Address(es) LTE DSP IPITF6
IPITF6
NDADDRCONFICT BTS3900, BTS3900
CHECK ND DAD LTE DSP IPITF6
IPITF6
ND DAD Attempts BTS3900, BTS3900
NDATTEMPTS Number LTE DSP IPITF6
IPITF6
NDREACHABLETI BTS3900, BTS3900
ME ND Reachable Time LTE DSP IPITF6
IPITF6
NDRETRANSINTE ND Retransmit BTS3900, BTS3900

RVAL Interval LTE DSP IPITF6
IPITF6
LINKLOCALADDR Link Local Address BTS3900, BTS3900
AUTOCONFIG Autoconfig LTE DSP IPITF6
IPITF6
STATELESSAUTO Stateless BTS3900, BTS3900
CONFIG Autoconfig LTE DSP IPITF6
ADD IPPATH
DSP IPPATH
IPPATH BTS3900, BTS3900 LST IPPATH
WCDMA, BTS3900 MOD IPPATH
PATHID Path ID LTE RMV IPPATH
IPPATH BTS3900, BTS3900 ADD IPPATH

CN Cabinet No. LTE LST IPPATH

SRN Subrack No. LTE LST IPPATH

SN Slot No. LTE LST IPPATH
IPPATH
BTS3900, BTS3900 ADD IPPATH

PT Port Type LTE LST IPPATH
IPPATH

PN Port No. LTE LST IPPATH
IPPATH

PATHTYPE Path Type LTE LST IPPATH
IPPATH
DSCP DSCP LTE LST IPPATH
IPPATH

LOCALIP Local IP LTE LST IPPATH
IPPATH

PEERIP Peer IP LTE LST IPPATH
IPPATH
ADD IPPATH
BTS3900, BTS3900 MOD IPPATH
Transport Resource WCDMA, BTS3900 DSP IPPATH
QT Type LTE LST IPPATH
IPPATH
PATHCHK Path Check BTS3900 LTE None
IPPATH ADD IPPATH

BTS3900, BTS3900 MOD IPPATH
WCDMA, BTS3900 DSP IPPATH
IPMUXSWITCH IPMUX Switch Flag LTE LST IPPATH
IPPATH

TIMER Max Timer LTE LST IPPATH
IPPATH

FRAMELEN Max Frame Length LTE LST IPPATH
IPPATH

Max Subframe WCDMA, BTS3900 MOD IPPATH
SUBFRAMELEN Length LTE LST IPPATH
IPPATH
BTS3900, BTS3900
REALTIMETXBAN Realtime TX WCDMA, BTS3900
DWIDTH Bandwidth LTE DSP IPPATH
IPPATH
BTS3900, BTS3900
REALTIMERXBAN Realtime RX WCDMA, BTS3900
DWIDTH Bandwidth LTE DSP IPPATH
IPPATH
BTS3900, BTS3900
NONREALTIMETX Non-Realtime TX WCDMA, BTS3900
BANDWIDTH Bandwidth LTE DSP IPPATH
IPPATH
BTS3900, BTS3900
NONREALTIMERX Non-Realtime RX WCDMA, BTS3900
BANDWIDTH Bandwidth LTE DSP IPPATH
IPPATH
NONREALTIMERE Non-Realtime BTS3900, BTS3900

SERVEDTXBAND Reserved TX WCDMA, BTS3900
WIDTH Bandwidth LTE DSP IPPATH
IPPATH
NONREALTIMERE Non-Realtime BTS3900, BTS3900

SERVEDRXBAND Reserved RX WCDMA, BTS3900
WIDTH Bandwidth LTE DSP IPPATH
IPPATH
BTS3900, BTS3900
IPPATHCHECKRE IP Path Check WCDMA, BTS3900
SULT Result LTE DSP IPPATH

Transmission WCDMA, BTS3900 MOD IPPATH
RSCGRPID Resource Group ID LTE LST IPPATH

DESCRI Description LTE LST IPPATH
IPPATH

SBT Subboard Type LTE LST IPPATH
IPPATH

VRFIDX VRF Index LTE LST IPPATH
IPPATH

Join Transmission WCDMA, BTS3900 MOD IPPATH
JNRSCGRP Resource Group LTE LST IPPATH
BTS3900, BTS3900
IPPATH REALTIMETOTALR WCDMA, BTS3900
XBANDWIDTH RX Bandwidth LTE DSP IPPATH
IPPATH BTS3900, BTS3900

REALTIMETOTALT WCDMA, BTS3900
XBANDWIDTH TX Bandwidth LTE DSP IPPATH
ADD IPPATH6
DSP IPPATH6
IPPATH6 MOD IPPATH6
BTS3900, BTS3900 RMV IPPATH6
PATHID Path ID LTE LST IPPATH6
IPPATH6
Join Transmission BTS3900, BTS3900 ADD IPPATH6
JNRSCGRP Resource Group LTE LST IPPATH6
IPPATH6
Transmission BTS3900, BTS3900 ADD IPPATH6
RSCGRPID Resource Group ID LTE LST IPPATH6
IPPATH6
BTS3900, BTS3900 ADD IPPATH6
ITFIDX Interface Index LTE LST IPPATH6
IPPATH6

PATHTYPE Path Type LTE LST IPPATH6
IPPATH6

DSCP DSCP LTE LST IPPATH6
IPPATH6

LOCALIP6 Local IPv6 Address LTE LST IPPATH6
IPPATH6

PEERIP6 Peer IPv6 Address LTE LST IPPATH6
IPPATH6
PATHCHK Path Check BTS3900 LTE None
IPPATH6
REALTIMETXBAN Realtime TX BTS3900, BTS3900
DWIDTH Bandwidth LTE DSP IPPATH6
IPPATH6
REALTIMERXBAN Realtime RX BTS3900, BTS3900
DWIDTH Bandwidth LTE DSP IPPATH6
IPPATH6
NONREALTIMETX Non-Realtime TX BTS3900, BTS3900
BANDWIDTH Bandwidth LTE DSP IPPATH6
IPPATH6
NONREALTIMERX Non-Realtime RX BTS3900, BTS3900
BANDWIDTH Bandwidth LTE DSP IPPATH6
IPPATH6 NONREALTIMERE Non-Realtime

SERVEDTXBAND Reserved TX BTS3900, BTS3900
WIDTH Bandwidth LTE DSP IPPATH6
IPPATH6 NONREALTIMERE Non-Realtime

SERVEDRXBAND Reserved RX BTS3900, BTS3900
WIDTH Bandwidth LTE DSP IPPATH6
IPPATH6 ADD IPPATH6
BTS3900, BTS3900 MOD IPPATH6
DESCRI Description Info LTE LST IPPATH6
ADD IPPATHRT
IPPATHRT DSP IPPATHRT
BTS3900, BTS3900 LST IPPATHRT
VRFIDX VRF Index LTE RMV IPPATHRT
IPPATHRT
ADD IPPATHRT
DSP IPPATHRT
BTS3900, BTS3900 RMV IPPATHRT
SRCIP Source IP LTE LST IPPATHRT
IPPATHRT
ADD IPPATHRT
DSP IPPATHRT
BTS3900, BTS3900 RMV IPPATHRT
DSTIP Destination IP LTE LST IPPATHRT
IPPATHRT
ADD IPPATHRT
Transport Resource BTS3900, BTS3900 DSP IPPATHRT
TRANRSCTYPE Type LTE LST IPPATHRT
IPPATHRT
ADD IPPATHRT
BTS3900, BTS3900 DSP IPPATHRT
NEXTHOPIP Next Hop IP LTE LST IPPATHRT
ADD
IPPMSESSION
DSP
IPPMSESSION
IPPMSESSION RMV
BTS3900, BTS3900 IPPMSESSION
WCDMA, BTS3900 LST
IPPMSN Session ID LTE IPPMSESSION
IPPMSESSION
ADD
IPPMSESSION
DSP
WCDMA, BTS3900 LST
LOCALIP Local IP LTE IPPMSESSION
IPPMSESSION
ADD
IPPMSESSION
DSP
WCDMA, BTS3900 LST
PEERIP Peer IP LTE IPPMSESSION
ADD
IPPMSESSION
IPPMSESSION DSP
WCDMA, BTS3900 LST
IPPMDSCP DSCP LTE IPPMSESSION
IPPMSESSION
ADD
IPPMSESSION
DSP
WCDMA, BTS3900 LST
DIR Activate Direction LTE IPPMSESSION
IPPMSESSION
BTS3900, BTS3900
WCDMA, BTS3900 DSP
TIMEDELAY Round Trip Time LTE IPPMSESSION
IPPMSESSION
BTS3900, BTS3900
WCDMA, BTS3900 DSP
RXJITTER RX Jitter LTE IPPMSESSION
IPPMSESSION
BTS3900, BTS3900
WCDMA, BTS3900 DSP
TXJITTER TX Jitter LTE IPPMSESSION
IPPMSESSION
BTS3900, BTS3900
WCDMA, BTS3900 DSP
RXLOSSRATE RX Loss Rate LTE IPPMSESSION
IPPMSESSION
BTS3900, BTS3900
WCDMA, BTS3900 DSP
TXLOSSRATE TX Loss Rate LTE IPPMSESSION
IPPMSESSION
BTS3900, BTS3900
WCDMA, BTS3900 DSP
IPPMUPACTSTATE Activate State(Up) LTE IPPMSESSION
IPPMSESSION
BTS3900, BTS3900
IPPMDOWNACTST Activate WCDMA, BTS3900 DSP
ATE State(Down) LTE IPPMSESSION
IPPMSESSION
ADD
IPPMSESSION
DSP
WCDMA, BTS3900 LST
IPPMTYPE IP PM Type LTE IPPMSESSION
IPPMSESSION
ADD
IPPMSESSION
DSP
WCDMA, BTS3900 LST
BINDPATH Bind IP Path LTE IPPMSESSION
ADD
IPPMSESSION
IPPMSESSION DSP
WCDMA, BTS3900 LST
PATHID IP Path ID LTE IPPMSESSION
IPPMSESSION BTS3900, BTS3900

DLDSCPCHANGEF DSCP Change WCDMA, BTS3900 DSP
LAG Flag(Down) LTE IPPMSESSION
BTS3900, BTS3900
IPPMSESSION DSCP Initial WCDMA, BTS3900 DSP
DLPREDSCP Value(Down) LTE IPPMSESSION

DSCP Changed WCDMA, BTS3900 DSP
DLMODIDSCP Value(Down) LTE IPPMSESSION
IPPMSESSION DSCP Changed BTS3900, BTS3900

DLDSCPCHANGE Date And WCDMA, BTS3900 DSP
DATETIME Time(Down) LTE IPPMSESSION

ULDSCPCHANGEF DSCP Change WCDMA, BTS3900 DSP
LAG Flag(Up) LTE IPPMSESSION
BTS3900, BTS3900
IPPMSESSION DSCP Initial WCDMA, BTS3900 DSP
ULPREDSCP Value(Up) LTE IPPMSESSION

DSCP Changed WCDMA, BTS3900 DSP
ULMODIDSCP Value(Up) LTE IPPMSESSION

ULDSCPCHANGE DSCP Changed WCDMA, BTS3900 DSP
DATETIME Date And Time(Up) LTE IPPMSESSION

IP PM Protocol WCDMA, BTS3900 DSP
VER Version LTE IPPMSESSION
ADD IPRT
IPRT BTS3900, BTS3900 MOD IPRT
WCDMA, BTS3900 RMV IPRT
RTIDX Route Index LTE LST IPRT
ADD IPRT
IPRT BTS3900, BTS3900 DSP IPRT
WCDMA, BTS3900 MOD IPRT
CN Cabinet No. LTE LST IPRT
ADD IPRT
SRN Subrack No. LTE LST IPRT
ADD IPRT
SN Slot No. LTE LST IPRT
IPRT
BTS3900, BTS3900 ADD IPRT

SBT Subboard Type LTE LST IPRT
IPRT

IFT Port Type LTE LST IPRT
IPRT

IFNO Port No. LTE LST IPRT
IPRT
ADD IPRT
BTS3900, BTS3900 MOD IPRT
WCDMA, BTS3900 DSP IPRT
RTTYPE Route Type LTE LST IPRT
IPRT ADD IPRT

VRFIDX VRF Index LTE LST IPRT
IPRT
ADD IPRT
DSTIP Destination IP LTE LST IPRT
IPRT
ADD IPRT
DSTMASK Mask LTE LST IPRT
IPRT
ADD IPRT
NEXTHOP Next Hop IP LTE LST IPRT
IPRT ADD IPRT
PREF Preference LTE LST IPRT
IPRT BTS3900, BTS3900 ADD IPRT

DESCRI Description Info LTE LST IPRT
IPRT
BTS3900, BTS3900
WCDMA, BTS3900
RTROUTETYPE Protocol LTE DSP IPRT
IPRT
BTS3900, BTS3900
ACTUALPORTTYP WCDMA, BTS3900
E Actual Port Type LTE DSP IPRT
BTS3900, BTS3900
IPRT WCDMA, BTS3900
ACTUALPORTNO Actual Port No. LTE DSP IPRT
IPRT6 ADD IPRT6
MOD IPRT6
RMV IPRT6
Destination IPv6 BTS3900, BTS3900 DSP IPRT6
DSTIP Address LTE LST IPRT6
ADD IPRT6
MOD IPRT6
IPRT6 RMV IPRT6
BTS3900, BTS3900 DSP IPRT6
PFXLEN Prefix Length LTE LST IPRT6
IPRT6
ADD IPRT6
MOD IPRT6
RMV IPRT6
RTTYPE Route Type LTE LST IPRT6
IPRT6 ADD IPRT6

MOD IPRT6
BTS3900, BTS3900 RMV IPRT6
NEXTHOPIP6TYPE Next Hop IPv6 Type LTE LST IPRT6
ADD IPRT6
MOD IPRT6
IPRT6 RMV IPRT6
Next Hop IPv6 BTS3900, BTS3900 DSP IPRT6
NEXTHOPIP Address LTE LST IPRT6
ADD IPRT6
MOD IPRT6
IPRT6 RMV IPRT6
ITFIDX Interface Index LTE LST IPRT6
IPRT6 ADD IPRT6

MOD IPRT6
PREF Preference LTE LST IPRT6
IPRT6
BTS3900, BTS3900
RTROUTETYPE Protocol LTE DSP IPRT6
IPRT6 ADD IPRT6

BTS3900, BTS3900 MOD IPRT6
DESCRI Description Info LTE LST IPRT6
ADD IPSECBIND
IPSECBIND BTS3900, BTS3900 MOD IPSECBIND
WCDMA, BTS3900 RMV IPSECBIND
CN Cabinet No. LTE LST IPSECBIND
ADD IPSECBIND
SRN Subrack No. LTE LST IPSECBIND
ADD IPSECBIND
SN Slot No. LTE LST IPSECBIND
IPSECBIND
ADD IPSECBIND
BTS3900, BTS3900 MOD IPSECBIND
SBT Subboard Type LTE LST IPSECBIND
ADD IPSECBIND
PT Port Type LTE LST IPSECBIND
IPSECBIND
ADD IPSECBIND
BTS3900, BTS3900 MOD IPSECBIND
PN Port No. LTE LST IPSECBIND
BTS3900, BTS3900
IPSECBIND WCDMA, BTS3900 ADD IPSECBIND
SPGN Policy Group Name LTE LST IPSECBIND
IPSECBIND
BTS3900, BTS3900 ADD IPSECBIND

WCDMA, BTS3900 MOD IPSECBIND
CTRLMODE Control Mode LTE LST IPSECBIND
IPSECBIND
BTS3900, BTS3900
WCDMA, BTS3900
AUTOCFGFLAG Auto Config Flag LTE LST IPSECBIND
ADD IPSECBIND6
IPSECBIND6 MOD IPSECBIND6
BTS3900, BTS3900 RMV IPSECBIND6
ITFIDX Interface Index LTE LST IPSECBIND6
IPSECBIND6
IPv6 IPSec Policy BTS3900, BTS3900 ADD IPSECBIND6
SPGN6 Group Name LTE LST IPSECBIND6
IPSECBIND6
ADD IPSECBIND6
BTS3900, BTS3900 MOD IPSECBIND6
CTRLMODE Control Mode LTE LST IPSECBIND6
IPSECBIND6
BTS3900, BTS3900
AUTOCFGFLAG Auto Config Flag LTE LST IPSECBIND6
ADD IPSECDTNL
IPSECDTNL DSP IPSECDTNL
BTS3900, BTS3900 LST IPSECDTNL
IPSec Dual Tunnel WCDMA, BTS3900 MOD IPSECDTNL
DUALID ID LTE RMV IPSECDTNL
IPSECDTNL
ADD IPSECDTNL
BTS3900, BTS3900 MOD IPSECDTNL
Master Policy WCDMA, BTS3900 DSP IPSECDTNL
MSPGN Group Name LTE LST IPSECDTNL
IPSECDTNL
ADD IPSECDTNL
Master IPSec WCDMA, BTS3900 DSP IPSECDTNL
MSPSN Sequence No. LTE LST IPSECDTNL
IPSECDTNL
ADD IPSECDTNL
Slave Policy Group WCDMA, BTS3900 DSP IPSECDTNL
SSPGN Name LTE LST IPSECDTNL
IPSECDTNL
ADD IPSECDTNL
Slave IPSec WCDMA, BTS3900 DSP IPSECDTNL
SSPSN Sequence No. LTE LST IPSECDTNL
ADD IPSECDTNL
IPSECDTNL BTS3900, BTS3900 MOD IPSECDTNL
Master Tunnel's WCDMA, BTS3900 DSP IPSECDTNL
MBFDSN BFD Session ID LTE LST IPSECDTNL
ADD IPSECDTNL
IPSECDTNL BTS3900, BTS3900 MOD IPSECDTNL
Slave Tunnel's BFD WCDMA, BTS3900 DSP IPSECDTNL
SBFDSN Session ID LTE LST IPSECDTNL
IPSECDTNL
BTS3900, BTS3900
CURRENTUSEDT Current Used IPSec WCDMA, BTS3900
UNNEL Policy LTE DSP IPSECDTNL
ADD
IPSECPOLICY
DSP
IPSECPOLICY
IPSECPOLICY LST IPSECPOLICY
MOD
BTS3900, BTS3900 IPSECPOLICY
WCDMA, BTS3900 RMV
SPGN Policy Group Name LTE IPSECPOLICY
IPSECPOLICY
DSP
IPSECPOLICY
LST IPSECPOLICY
IPSECPOLICY MOD
BTS3900, BTS3900 IPSECPOLICY
IPSec Sequence WCDMA, BTS3900 RMV
SPSN No. LTE IPSECPOLICY
IPSECPOLICY
MOD
IPSECPOLICY
IPSECPOLICY BTS3900, BTS3900 DSP
WCDMA, BTS3900 IPSECPOLICY
ACLID ACL ID LTE LST IPSECPOLICY
IPSECPOLICY
MOD
IPSECPOLICY
IPSec Proposal WCDMA, BTS3900 IPSECPOLICY
PROPNAME Name LTE LST IPSECPOLICY
IPSECPOLICY
MOD
IPSECPOLICY
PEERNAME IKE Peer Name LTE LST IPSECPOLICY
IPSECPOLICY
ADD
IPSECPOLICY
MOD
IPSECPOLICY
Perfect Forward WCDMA, BTS3900 IPSECPOLICY
PFS Secrecy LTE LST IPSECPOLICY
IPSECPOLICY
ADD
IPSECPOLICY
MOD
IPSECPOLICY
LTCFG SA Duration Mode LTE LST IPSECPOLICY
IPSECPOLICY
ADD
IPSECPOLICY
MOD
IPSECPOLICY
Lifetime Based On WCDMA, BTS3900 IPSECPOLICY
LTS Time LTE LST IPSECPOLICY
IPSECPOLICY
ADD
IPSECPOLICY
MOD
IPSECPOLICY
Lifetime Based On WCDMA, BTS3900 IPSECPOLICY
LTKB Traffic LTE LST IPSECPOLICY
IPSECPOLICY
ADD
IPSECPOLICY
BTS3900, BTS3900 MOD
CTRLMODE Control Mode LTE LST IPSECPOLICY
IPSECPOLICY BTS3900, BTS3900

WCDMA, BTS3900 DSP
CABINETNO Cabinet No. LTE IPSECPOLICY

WCDMA, BTS3900 DSP
SUBRACKNO Subrack No. LTE IPSECPOLICY

WCDMA, BTS3900 DSP
SLOTNO Slot No. LTE IPSECPOLICY
IPSECPOLICY
ADD
IPSECPOLICY
MOD
IPSECPOLICY
Anti-Replay WCDMA, BTS3900 IPSECPOLICY
REPLAYWND Window Size LTE LST IPSECPOLICY
IPSECPOLICY
BTS3900, BTS3900
WCDMA, BTS3900
AUTOCFGFLAG Auto Config Flag LTE LST IPSECPOLICY
ADD
IPSECPOLICY6
DSP
IPSECPOLICY6
IPSECPOLICY6 LST
IPSECPOLICY6
MOD
IPSECPOLICY6
IPv6 Policy Group BTS3900, BTS3900 RMV
SPGN Name LTE IPSECPOLICY6
ADD
IPSECPOLICY6
DSP
IPSECPOLICY6
IPSECPOLICY6 LST
IPSECPOLICY6
MOD
IPSECPOLICY6
IPv6 IPSec BTS3900, BTS3900 RMV
SPSN Sequence No. LTE IPSECPOLICY6
ADD
IPSECPOLICY6
MOD
IPSECPOLICY6 IPSECPOLICY6
DSP
IPSECPOLICY6
ACLTYPE ACL Type LTE IPSECPOLICY6
ADD
IPSECPOLICY6
MOD
DSP
IPSECPOLICY6
ACLID IPv4 ACL ID LTE IPSECPOLICY6
ADD
IPSECPOLICY6
MOD
DSP
IPSECPOLICY6
ACL6ID IPv6 ACL ID LTE IPSECPOLICY6
ADD
IPSECPOLICY6
MOD
DSP
IPSECPOLICY6
IPSec Proposal BTS3900, BTS3900 LST
PROPNAME Name LTE IPSECPOLICY6
ADD
IPSECPOLICY6
MOD
DSP
IPSECPOLICY6
IPv6 IKE Peer BTS3900, BTS3900 LST
PEER6NAME Name LTE IPSECPOLICY6
IPSECPOLICY6
ADD
IPSECPOLICY6
MOD
IPSECPOLICY6
DSP
IPSECPOLICY6
Perfect Forward BTS3900, BTS3900 LST
PFS Secrecy LTE IPSECPOLICY6
IPSECPOLICY6
ADD
IPSECPOLICY6
MOD
IPSECPOLICY6
DSP
IPSECPOLICY6
IPv6 SA Duration BTS3900, BTS3900 LST
LTCFG Mode LTE IPSECPOLICY6
IPSECPOLICY6
ADD
IPSECPOLICY6
MOD
IPSECPOLICY6
DSP
IPSECPOLICY6
Lifetime Based On BTS3900, BTS3900 LST
LTS Time LTE IPSECPOLICY6
IPSECPOLICY6
ADD
IPSECPOLICY6
MOD
IPSECPOLICY6
DSP
IPSECPOLICY6
Lifetime Based On BTS3900, BTS3900 LST
LTKB Traffic LTE IPSECPOLICY6
IPSECPOLICY6
ADD
IPSECPOLICY6
MOD
IPSECPOLICY6
CTRLMODE Control Mode LTE IPSECPOLICY6
IPSECPOLICY6
CABINETNO Cabinet No. LTE IPSECPOLICY6
IPSECPOLICY6
SUBRACKNO Subrack No. LTE IPSECPOLICY6
IPSECPOLICY6
SLOTNO Slot No. LTE IPSECPOLICY6
IPSECPOLICY6

AUTOCFGFLAG Auto Config Flag LTE IPSECPOLICY6
ADD
IPSECPROPOSAL
DSP
IPSECPROPOSAL IPSECPROPOSAL
LST
IPSECPROPOSAL
MOD
BTS3900, BTS3900 IPSECPROPOSAL
IPSec Proposal WCDMA, BTS3900 RMV
PROPNAME Name LTE IPSECPROPOSAL
IPSECPROPOSAL
ADD
IPSECPROPOSAL
MOD
IPSECPROPOSAL
DSP
Encapsulation WCDMA, BTS3900 LST
ENCAPMODE Mode LTE IPSECPROPOSAL
IPSECPROPOSAL
ADD
IPSECPROPOSAL
MOD
IPSECPROPOSAL
DSP
WCDMA, BTS3900 LST
TRANMODE Transform LTE IPSECPROPOSAL
IPSECPROPOSAL
ADD
IPSECPROPOSAL
MOD
IPSECPROPOSAL
DSP
AH Authentication WCDMA, BTS3900 LST
AHAUTHALG Algorithm LTE IPSECPROPOSAL
IPSECPROPOSAL
ADD
IPSECPROPOSAL
MOD
IPSECPROPOSAL
DSP
ESP Authentication WCDMA, BTS3900 LST
ESPAUTHALG Algorithm LTE IPSECPROPOSAL
IPSECPROPOSAL
ADD
IPSECPROPOSAL
MOD
IPSECPROPOSAL
DSP
ESP Encryption WCDMA, BTS3900 LST
ESPENCALG Algorithm LTE IPSECPROPOSAL
IPSECPROPOSAL BTS3900, BTS3900

WCDMA, BTS3900 DSP
CABINETNO Cabinet No. LTE IPSECPROPOSAL

WCDMA, BTS3900 DSP
SUBRACKNO Subrack No. LTE IPSECPROPOSAL

WCDMA, BTS3900 DSP
SLOTNO Slot No. LTE IPSECPROPOSAL
LLDPGLOBAL
SET
LLDPGLOBALINFO
DSP
BTS3900, BTS3900 LLDPGLOBALINFO
WCDMA, BTS3900 LST
TXINTVAL LLDPDU Tx Interval LTE LLDPGLOBALINFO
LLDPGLOBAL
SET
LLDPGLOBALINFO
DSP
LLDP Hold WCDMA, BTS3900 LST
HOLDMULTI Multiplier LTE LLDPGLOBALINFO
LLDPGLOBAL
SET
LLDPGLOBALINFO
DSP
WCDMA, BTS3900 LST
REINITDELAY Reinit Delay LTE LLDPGLOBALINFO
LLDPGLOBAL
SET
LLDPGLOBALINFO
DSP
WCDMA, BTS3900 LST
DELAY Transmission Delay LTE LLDPGLOBALINFO
LLDPGLOBAL
SET
LLDPGLOBALINFO
DSP
WCDMA, BTS3900 LST
NOTIFYSW LLDP Notify Switch LTE LLDPGLOBALINFO
LLDPGLOBAL
SET
LLDPGLOBALINFO
DSP
WCDMA, BTS3900 LST
NOTIFYINTERVAL Notify Interval LTE LLDPGLOBALINFO
BTS3900, BTS3900
LLDPLOCAL Link Aggregation WCDMA, BTS3900 DSP
AGGRENABLED Enabled LTE LLDPNEIGHBOR
LLDPLOCAL
BTS3900, BTS3900
WCDMA, BTS3900 DSP
AGGRPORTID Aggregation Port ID LTE LLDPNEIGHBOR
LLDPLOCAL BTS3900, BTS3900

AGGRSUPPORTE Link Aggregation WCDMA, BTS3900 DSP
D Supported LTE LLDPNEIGHBOR
BTS3900, BTS3900
LLDPLOCAL AUTONEGOENAB Auto-negotiation WCDMA, BTS3900 DSP
LED Enabled LTE LLDPNEIGHBOR
LLDPLOCAL
BTS3900, BTS3900
AUTONEGOSUPP Auto-negotiation WCDMA, BTS3900 DSP
ORTED Supported LTE LLDPNEIGHBOR
ADD LLDPPORT
DSP
LLDPNEIGHBOR
DSP LLDPPORT
LLDPLOCAL
DSP LLDPSTAT
RMV LLDPPORT
WCDMA, BTS3900 LLDPGLOBALINFO
CN Cabinet No. LTE LST LLDPPORT
LLDPLOCAL

WCDMA, BTS3900 LLDPNEIGHBOR
CHASSISID Chassis ID LTE DSP LLDPPORT
LLDPLOCAL

CHASSISIDSUBTY WCDMA, BTS3900 LLDPNEIGHBOR
PE Chassis ID Subtype LTE DSP LLDPPORT
LLDPLOCAL
BTS3900, BTS3900
WCDMA, BTS3900 DSP
EXPIREDTIMES Expired Time LTE LLDPNEIGHBOR
LLDPLOCAL

Management WCDMA, BTS3900 LLDPNEIGHBOR
MANADDR Address LTE DSP LLDPPORT
LLDPLOCAL MANADDRSUBTY Management WCDMA, BTS3900 LLDPNEIGHBOR
PE Address Type LTE DSP LLDPPORT
LLDPLOCAL
BTS3900, BTS3900
WCDMA, BTS3900 DSP
MAU MAU LTE LLDPNEIGHBOR
LLDPLOCAL
BTS3900, BTS3900
Maximum Frame WCDMA, BTS3900 DSP
MAXFRMSIZE Size LTE LLDPNEIGHBOR
LLDPLOCAL WCDMA, BTS3900 LLDPNEIGHBOR
PORTDESC Port Description LTE DSP LLDPPORT
PORTID Port ID LTE DSP LLDPPORT
LLDPLOCAL

PORTIDSUBTYPE Port ID Subtype LTE DSP LLDPPORT
LLDPLOCAL
ADD LLDPPORT
DSP
LLDPNEIGHBOR
DSP LLDPPORT
BTS3900, BTS3900 DSP LLDPSTAT
WCDMA, BTS3900 RMV LLDPPORT
PN Port No. LTE LST LLDPPORT
LLDPLOCAL
BTS3900, BTS3900
WCDMA, BTS3900 DSP
PORTVLANID Port VLAN ID LTE LLDPNEIGHBOR
BTS3900, BTS3900
LLDPLOCAL Port and Protocol WCDMA, BTS3900 DSP
PPVLANENABLED VLAN Enabled LTE LLDPNEIGHBOR
LLDPLOCAL
BTS3900, BTS3900
Port and Protocol WCDMA, BTS3900 DSP
PPVLANID VLAN ID List LTE LLDPNEIGHBOR
LLDPLOCAL
BTS3900, BTS3900
PPVLANSUPPORT Port and Protocol WCDMA, BTS3900 DSP
ED VLAN Supported LTE LLDPNEIGHBOR
The Number Of Rx BTS3900, BTS3900
LLDPLOCAL RXDISCARDEDFR LLDP Frames WCDMA, BTS3900
AMES Discarded LTE DSP LLDPSTAT
LLDPLOCAL The Number Of Rx BTS3900, BTS3900

RXDISCARDEDTL LLDP TLVs WCDMA, BTS3900
V Discarded LTE DSP LLDPSTAT
LLDPLOCAL BTS3900, BTS3900

RXERRORFRAME The Number Of Rx WCDMA, BTS3900
S LLDP Error Frames LTE DSP LLDPSTAT
The Number Of BTS3900, BTS3900
LLDPLOCAL LLDP Frames WCDMA, BTS3900
RXTOTALFRAMES Received LTE DSP LLDPSTAT
The Number Of
LLDPLOCAL LLDP Neighbor BTS3900, BTS3900
RXTOTALAGEOUT Information Aged WCDMA, BTS3900
S Out LTE DSP LLDPSTAT
LLDPLOCAL The Number Of BTS3900, BTS3900
RXUNRECOGNIZE LLDP TLVs WCDMA, BTS3900
DTLVS Unrecognized LTE DSP LLDPSTAT
ADD LLDPPORT
DSP
LLDPNEIGHBOR
DSP LLDPPORT
LLDPLOCAL DSP LLDPSTAT
RMV LLDPPORT
SN Slot No. LTE LST LLDPPORT
LLDPLOCAL ADD LLDPPORT

DSP
LLDPNEIGHBOR
DSP LLDPPORT
DSP LLDPSTAT
RMV LLDPPORT
SBT Subboard Type LTE LST LLDPPORT
ADD LLDPPORT
DSP
LLDPNEIGHBOR
DSP LLDPPORT
LLDPLOCAL DSP LLDPSTAT
RMV LLDPPORT
SRN Subrack No. LTE LST LLDPPORT
LLDPLOCAL

System Capabilities WCDMA, BTS3900 LLDPNEIGHBOR
SYSCAPENABLED Enabled LTE DSP LLDPPORT
LLDPLOCAL

SYSCAPSUPPORT System Capabilities WCDMA, BTS3900 LLDPNEIGHBOR
ED Supported LTE DSP LLDPPORT
LLDPLOCAL

SYSDESC System Description LTE DSP LLDPPORT
SYSNAME System Name LTE DSP LLDPPORT
The Number Of BTS3900, BTS3900
LLDPLOCAL LLDP Frames WCDMA, BTS3900
TXTOTALFRAMES Transmitted LTE DSP LLDPSTAT
LLDPLOCAL

VLANNAMELIST VLAN Name List LTE DSP LLDPPORT
LLDPLOCAL BTS3900, BTS3900 DSP

Number of VLAN WCDMA, BTS3900 LLDPNEIGHBOR
VLANNAMENUM Name LTE DSP LLDPPORT
BTS3900, BTS3900
LLDPLOCAL Number of Port and WCDMA, BTS3900 DSP
PPVLANNUM Protocol VLAN ID LTE LLDPNEIGHBOR
LLDPLOCAL
BTS3900, BTS3900 ADD LLDPPORT

WCDMA, BTS3900 DSP LLDPPORT
BNDVLAN Binding VLAN LTE LST LLDPPORT
LLDPLOCAL BTS3900, BTS3900 ADD LLDPPORT

VLANID VLAN ID LTE LST LLDPPORT
LLDPLOCAL BTS3900, BTS3900 ADD LLDPPORT

VLANPRI VLAN Priority LTE LST LLDPPORT
LOCALETHPORT
SET
BTS3900, BTS3900 LOCALETHPORT
WCDMA, BTS3900 LST
SWITCH Enable Flag LTE LOCALETHPORT
LOCALETHPORT BTS3900, BTS3900

WCDMA, BTS3900 DSP
CONFIGSTATUS Actual Effect Status LTE LOCALETHPORT
LOCALETHPORT
BTS3900, BTS3900
WCDMA, BTS3900 DSP
PORTSTATUS Port Status LTE LOCALETHPORT
LOCALETHPORT
BTS3900, BTS3900
Number of RX WCDMA, BTS3900 DSP
RXDROPPED Discarded Packets LTE LOCALETHPORT

Number of RX WCDMA, BTS3900 DSP
RXPACKETS Packets LTE LOCALETHPORT
LOCALETHPORT
BTS3900, BTS3900
Number of TX WCDMA, BTS3900 DSP
TXDROPPED Discarded Packets LTE LOCALETHPORT

TXPACKETS Packets LTE LOCALETHPORT
LOCALIP
BTS3900, BTS3900 SET LOCALIP

WCDMA, BTS3900 DSP LOCALIP
IP IP Address LTE LST LOCALIP
LOCALIP
BTS3900, BTS3900 SET LOCALIP

WCDMA, BTS3900 DSP LOCALIP
MASK Mask LTE LST LOCALIP
LOCALIP6
SET LOCALIP6
BTS3900, BTS3900 DSP LOCALIP6
IP6 IPv6 Address LTE LST LOCALIP6
LOCALIP6 SET LOCALIP6

BTS3900, BTS3900 DSP LOCALIP6
PFXLEN Prefix Length LTE LST LOCALIP6
LOCALIP6
BTS3900, BTS3900
ADDRESSSTATUS Address Status LTE DSP LOCALIP6
LOCALIP6
BTS3900, BTS3900
VALIDLIFETIME Valid Lifetime LTE DSP LOCALIP6
LOCALIP6
PREFERREDLIFET BTS3900, BTS3900

IME Preferred Lifetime LTE DSP LOCALIP6
LR BTS3900, BTS3900
WCDMA, BTS3900 SET LR
CN Cabinet No. LTE LST LR
LR BTS3900, BTS3900
SRN Subrack No. LTE LST LR
LR BTS3900, BTS3900
SN Slot No. LTE LST LR
LR
BTS3900, BTS3900
PT Port Type LTE LST LR
LR
BTS3900, BTS3900
PN Port No. LTE LST LR
LR
BTS3900, BTS3900
LRSW LR Switch LTE LST LR
LR
BTS3900, BTS3900
UL Committed WCDMA, BTS3900 SET LR
CIR Information Rate LTE LST LR
LR
BTS3900, BTS3900
Committed Burst WCDMA, BTS3900 SET LR
CBS Size LTE LST LR
LR
BTS3900, BTS3900
EBS Excess Burst Size LTE LST LR
LR
BTS3900, BTS3900
SBT Subboard Type LTE LST LR
LR
BTS3900, BTS3900
DL Committed WCDMA, BTS3900 SET LR
DLCIR Information Rate LTE LST LR
ADD MPGRP
DSP MPGRP
MPGRP MOD MPGRP
BTS3900, BTS3900 RMV MPGRP
WCDMA, BTS3900 RST MPGRP
CN Cabinet No. LTE LST MPGRP
ADD MPGRP
DSP MPGRP
MPGRP MOD MPGRP
SRN Subrack No. LTE LST MPGRP
ADD MPGRP
DSP MPGRP
MPGRP MOD MPGRP
SN Slot No. LTE LST MPGRP
ADD MPGRP
DSP MPGRP
MOD MPGRP
MPGRP RMV MPGRP
BTS3900, BTS3900 RST MPGRP
MPGRPN Group No. LTE LST MPGRP
MPGRP
ADD MPGRP
BTS3900, BTS3900 MOD MPGRP
WCDMA, BTS3900 DSP MPGRP
MCPPP Multi-Class PPP LTE LST MPGRP
MPGRP
BTS3900, BTS3900 ADD MPGRP
WCDMA, BTS3900 MOD MPGRP
AUTH Authentication Type LTE LST MPGRP
MPGRP BTS3900, BTS3900 ADD MPGRP

UN User Name LTE LST MPGRP

PWD Password LTE LST MPGRP
MPGRP
ADD MPGRP
LOCALIP Local IP LTE LST MPGRP
MPGRP
ADD MPGRP
IPMASK Mask LTE LST MPGRP
MPGRP
ADD MPGRP
PEERIP Peer IP LTE LST MPGRP

MP/MC Header WCDMA, BTS3900 MOD MPGRP
MHO Option LTE LST MPGRP
MPGRP
ADD MPGRP
MUXCP PPPMUX LTE LST MPGRP

MLPPP Fragment WCDMA, BTS3900 MOD MPGRP
FRAGSIZE Size LTE LST MPGRP
MPGRP

PPP Mux Subframe WCDMA, BTS3900 MOD MPGRP
MAXSFLEN Max Length LTE LST MPGRP
MPGRP

PPP Muxframe Max WCDMA, BTS3900 MOD MPGRP
MAXMFLEN Length LTE LST MPGRP
MPGRP

PPPMUX Combine WCDMA, BTS3900 MOD MPGRP
MUXTIME Timeout LTE LST MPGRP
MPGRP

MCCLASS MCPPP Class LTE LST MPGRP
MPGRP
ADD MPGRP
IP Header WCDMA, BTS3900 DSP MPGRP
IPHC Compression LTE LST MPGRP
MPGRP MLPPP Packets BTS3900, BTS3900 ADD MPGRP

Discard Alarm WCDMA, BTS3900 MOD MPGRP
MPDAAT Appear Threshold LTE LST MPGRP
MLPPP Packets
MPGRP Discard Alarm BTS3900, BTS3900 ADD MPGRP
Disappear WCDMA, BTS3900 MOD MPGRP
MPDADT Threshold LTE LST MPGRP

IPHCSUBOPT IPHC SubOption LTE LST MPGRP
BTS3900, BTS3900
MPGRP MLPPP Group WCDMA, BTS3900
MPGROUPSTATUS Status LTE DSP MPGRP
MPGRP
BTS3900, BTS3900
WCDMA, BTS3900
IPCPSTATUS IPCP Status LTE DSP MPGRP
MPGRP
BTS3900, BTS3900
WCDMA, BTS3900
PPPMUXSTATUS PPPMUX Status LTE DSP MPGRP
MPGRP BTS3900, BTS3900

Local IP Negotiation WCDMA, BTS3900
LOCALIPNEGRLT Result LTE DSP MPGRP
BTS3900, BTS3900
MPGRP Local IP Mask WCDMA, BTS3900
IPMASKNEGRLT Negotiation Result LTE DSP MPGRP
BTS3900, BTS3900
MPGRP Peer IP Negotiation WCDMA, BTS3900
PEERIPNEGRLT Result LTE DSP MPGRP

Multi-Class PPP WCDMA, BTS3900
MCPPPNEGRLT Negotiation Result LTE DSP MPGRP
MPGRP Maximum Receive BTS3900, BTS3900

Unit Negotiation WCDMA, BTS3900
MRUNEGRLT Result LTE DSP MPGRP
BTS3900, BTS3900
MPGRP PPPMUX WCDMA, BTS3900
MUXNEGRLT Negotiation Result LTE DSP MPGRP

ACFC Negotiation WCDMA, BTS3900
ACFCNEGRLT Result LTE DSP MPGRP

PFC Negotiation WCDMA, BTS3900
PFCNEGRLT Result LTE DSP MPGRP
BTS3900, BTS3900
MPGRP IPHC Negotiation WCDMA, BTS3900
IPHCNEGRLT Result LTE DSP MPGRP
BTS3900, BTS3900
MPGRP Number of RX WCDMA, BTS3900
RXPKT Packets LTE DSP MPGRP
BTS3900, BTS3900
MPGRP Number of TX WCDMA, BTS3900
TXPKT Packets LTE DSP MPGRP
BTS3900, BTS3900
MPGRP WCDMA, BTS3900
RXFLOW RX Flow LTE DSP MPGRP
BTS3900, BTS3900
TXFLOW TX Flow LTE DSP MPGRP

WCDMA, BTS3900
IPNUM Number of IPs LTE DSP MPGRP
BTS3900, BTS3900
IPLIST IP Address List LTE DSP MPGRP
MPGRP
ADD MPGRP
DSP MPGRP
MOD MPGRP
SBT Subboard Type LTE LST MPGRP
BTS3900, BTS3900
MPGRP Number of RX WCDMA, BTS3900
RXBYTE Bytes LTE DSP MPGRP
BTS3900, BTS3900
MPGRP Number of RX Drop WCDMA, BTS3900
RXDROPPKT Packets LTE DSP MPGRP
BTS3900, BTS3900
MPGRP Number of TX WCDMA, BTS3900
TXBYTE Bytes LTE DSP MPGRP

Number of TX Drop WCDMA, BTS3900
TXDROPPKT Packets LTE DSP MPGRP
ADD MPLNK
MPLNK BTS3900, BTS3900 DSP MPLNK
WCDMA, BTS3900 RMV MPLNK
CN Cabinet No. LTE LST MPLNK
ADD MPLNK
SRN Subrack No. LTE LST MPLNK
ADD MPLNK
SN Slot No. LTE LST MPLNK
ADD MPLNK
DSP MPLNK
MPLNK BTS3900, BTS3900 RMV MPLNK
PPPLNKN Link No. LTE LST MPLNK
MPLNK BTS3900, BTS3900 ADD MPLNK

WCDMA, BTS3900 DSP MPLNK
MPGRPN MLPPP Group No. LTE LST MPLNK
MPLNK
BTS3900, BTS3900
WCDMA, BTS3900 ADD MPLNK
E1T1SRN E1/T1 Subrack No. LTE LST MPLNK
MPLNK
BTS3900, BTS3900
E1T1SN E1/T1 Slot No. LTE LST MPLNK
MPLNK
BTS3900, BTS3900
E1T1PN E1/T1 Port No. LTE LST MPLNK
MPLNK
BTS3900, BTS3900
TSN Timeslot No. LTE LST MPLNK
MPLNK
BTS3900, BTS3900 ADD MPLNK

Maximum Receive WCDMA, BTS3900 DSP MPLNK
MRU Unit LTE LST MPLNK
MPLNK
BTS3900, BTS3900 ADD MPLNK

Protocol Field WCDMA, BTS3900 DSP MPLNK
PFC Compression LTE LST MPLNK
MPLNK
Address and BTS3900, BTS3900 ADD MPLNK

Control Field WCDMA, BTS3900 DSP MPLNK
ACFC Compression LTE LST MPLNK
MPLNK BTS3900, BTS3900

RESTARTTMR Negotiation Time LTE LST MPLNK
MPLNK
ADD MPLNK
BTS3900, BTS3900 DSP MPLNK
SBT Subboard Type LTE LST MPLNK
MPLNK
BTS3900, BTS3900
MLPPP Group WCDMA, BTS3900 ADD MPLNK
MPGRPSBT Subboard Type LTE LST MPLNK
BTS3900, BTS3900
MPLNK WCDMA, BTS3900
MPLNKSTATUS MLPPP Link Status LTE DSP MPLNK
MPLNK
BTS3900, BTS3900
WCDMA, BTS3900
LCPSTATUS LCP Status LTE DSP MPLNK
MPLNK Maximum Receive BTS3900, BTS3900

MRUNEGRLT Result LTE DSP MPLNK

PFCNEGRLT Result LTE DSP MPLNK
MPLNK
BTS3900, BTS3900
ACFCNEGRLT Result LTE DSP MPLNK
MPLNK
BTS3900, BTS3900
E1/T1 Subboard WCDMA, BTS3900 ADD MPLNK
E1T1SBT Type LTE LST MPLNK
BTS3900, BTS3900
MPLNK Number of RX WCDMA, BTS3900
RXPKT Packets LTE DSP MPLNK
BTS3900, BTS3900
MPLNK Number of RX WCDMA, BTS3900
RXBYTE Bytes LTE DSP MPLNK
BTS3900, BTS3900
MPLNK Number of RX Drop WCDMA, BTS3900
RXDROPPKT Packets LTE DSP MPLNK
BTS3900, BTS3900
MPLNK Number of TX WCDMA, BTS3900
TXPKT Packets LTE DSP MPLNK
BTS3900, BTS3900
MPLNK Number of TX WCDMA, BTS3900
TXBYTE Bytes LTE DSP MPLNK
TXDROPPKT Packets LTE DSP MPLNK
ADD OMCH
DSP OMCH
OMCH BTS3900, BTS3900 MOD OMCH
WCDMA, BTS3900 RMV OMCH
FLAG Standby Status LTE LST OMCH
OMCH
ADD OMCH
BTS3900, BTS3900 MOD OMCH
WCDMA, BTS3900 DSP OMCH
IP Local IP LTE LST OMCH
OMCH
ADD OMCH
MASK Local Mask LTE LST OMCH
OMCH
ADD OMCH
PEERIP Peer IP LTE LST OMCH
OMCH
ADD OMCH
PEERMASK Peer Mask LTE LST OMCH
ADD OMCH
OMCH BTS3900, BTS3900 MOD OMCH
BEAR Bearer Type LTE LST OMCH
OMCH
ADD OMCH
BRT Binding Route LTE LST OMCH
OMCH BTS3900, BTS3900

WCDMA, BTS3900
STATUS OM Channel Status LTE DSP OMCH
OMCH BTS3900, BTS3900

WCDMA, BTS3900
USEDSTATE Used State LTE DSP OMCH
OMCH
ADD OMCH
RTIDX Route Index LTE LST OMCH
OMCH
ADD OMCH
BINDSECONDARY Binding Secondary WCDMA, BTS3900 DSP OMCH
RT Route LTE LST OMCH
OMCH
ADD OMCH
SECONDARYRTID Secondary Route WCDMA, BTS3900 DSP OMCH
X Index LTE LST OMCH
OMCH
ADD OMCH
CHECKTYPE Check Type LTE LST OMCH
OMCH ADD OMCH

UDPSN UDP Session ID LTE LST OMCH
OMCH6
ADD OMCH6
MOD OMCH6
BTS3900, BTS3900 DSP OMCH6
LOCALIP6 Local IPv6 Address LTE LST OMCH6
OMCH6
ADD OMCH6
MOD OMCH6
BTS3900, BTS3900 DSP OMCH6
PEERIP6 Peer IPv6 Address LTE LST OMCH6
OMCH6
BTS3900, BTS3900
STATUS OM Channel Status LTE DSP OMCH6
ADD
PACKETFILTER
DSP
PACKETFILTER PACKETFILTER
RMV
BTS3900, BTS3900 PACKETFILTER
WCDMA, BTS3900 LST
CN Cabinet No. LTE PACKETFILTER
ADD
PACKETFILTER
DSP
RMV
WCDMA, BTS3900 LST
SRN Subrack No. LTE PACKETFILTER
ADD
PACKETFILTER
DSP
RMV
WCDMA, BTS3900 LST
SN Slot No. LTE PACKETFILTER
ADD
PACKETFILTER
DSP
RMV
WCDMA, BTS3900 LST
PT Port Type LTE PACKETFILTER
PACKETFILTER
ADD
PACKETFILTER
DSP
PACKETFILTER
RMV
WCDMA, BTS3900 LST
PN Port No. LTE PACKETFILTER
ADD
PACKETFILTER
PACKETFILTER DSP
WCDMA, BTS3900 LST
ACLID Advanced ACL ID LTE PACKETFILTER
PACKETFILTER
ADD
PACKETFILTER
DSP
WCDMA, BTS3900 LST
MB Match Behavior LTE PACKETFILTER
PACKETFILTER
ADD
PACKETFILTER
DSP
PACKETFILTER
RMV
WCDMA, BTS3900 LST
SBT Subboard Type LTE PACKETFILTER
PACKETFILTER
BTS3900, BTS3900
TXPACKETS Packets LTE PACKETFILTER
BTS3900, BTS3900
PACKETFILTER Number of RX WCDMA, BTS3900 DSP
RXPACKETS Packets LTE PACKETFILTER
PACKETFILTER
BTS3900, BTS3900
TXPERMITPACKE Number of TX WCDMA, BTS3900 DSP
T Permit Packets LTE PACKETFILTER
PACKETFILTER BTS3900, BTS3900

RXPERMITPACKE Number of RX WCDMA, BTS3900 DSP
T Permit Packets LTE PACKETFILTER
PACKETFILTER
BTS3900, BTS3900
Number of TX Deny WCDMA, BTS3900 DSP
TXDENYPACKET Packets LTE PACKETFILTER

Number of RX Deny WCDMA, BTS3900 DSP
RXDENYPACKET Packets LTE PACKETFILTER
PACKETFILTER
BTS3900, BTS3900
Bytes of TX WCDMA, BTS3900 DSP
TXBYTES Packets LTE PACKETFILTER

Bytes of RX WCDMA, BTS3900 DSP
RXBYTES Packets LTE PACKETFILTER
PACKETFILTER
BTS3900, BTS3900
Bytes of TX Permit WCDMA, BTS3900 DSP
TXPERMITBYTES Packets LTE PACKETFILTER

Bytes of RX Permit WCDMA, BTS3900 DSP
RXPERMITBYTES Packets LTE PACKETFILTER
PACKETFILTER
BTS3900, BTS3900
Bytes of TX Deny WCDMA, BTS3900 DSP
TXDENYBYTES Packets LTE PACKETFILTER

Bytes of RX Deny WCDMA, BTS3900 DSP
RXDENYBYTES Packets LTE PACKETFILTER
PACKETFILTER
Bytes of RX BTS3900, BTS3900

RXDEFAULTBYTE Packets Matched WCDMA, BTS3900 DSP
S Default Behavior LTE PACKETFILTER
PACKETFILTER
Number of RX BTS3900, BTS3900

RXDEFAULTPACK Packets Matched WCDMA, BTS3900 DSP
ETS Default Behavior LTE PACKETFILTER
ADD
DSP
WCDMA, BTS3900 LST
ACLID2 Layer 2 ACL ID LTE PACKETFILTER
ADD
PACKETFILTER
PACKETFILTER DSP
WCDMA, BTS3900 LST
FM Filter Mode LTE PACKETFILTER
PINGFILTER
BTS3900, BTS3900 ADD PINGFILTER

WCDMA, BTS3900 RMV PINGFILTER
IP IP Address LTE LST PINGFILTER
PINGFILTER

WCDMA, BTS3900 RMV PINGFILTER
MASK Mask LTE LST PINGFILTER
PINGFILTER WCDMA, BTS3900 RMV PINGFILTER
VRFIDX VRF Index LTE LST PINGFILTER
PLRTHRESHOLD
SET
BTS3900, BTS3900 PLRTHRESHOLD
PLR Appear WCDMA, BTS3900 LST
PLRAT Threshold LTE PLRTHRESHOLD
PLRTHRESHOLD
SET
BTS3900, BTS3900 PLRTHRESHOLD
PLR Disappear WCDMA, BTS3900 LST
PLRDT Threshold LTE PLRTHRESHOLD
PMTUCFG
BTS3900, BTS3900 SET PMTUCFG

MODE Detection Mode LTE LST PMTUCFG
PMTUCFG

UDPPORT UDP Port No. LTE LST PMTUCFG
PMTUCFG
DETECTPERIOD Detection Period LTE LST PMTUCFG
PMTUCFG
AGINGPERIOD Aging Period LTE LST PMTUCFG
PMTUCFG

DSCP DSCP LTE LST PMTUCFG
DSP
PORTSECURITY
PORTSECURITY SET
BTS3900, BTS3900 PORTSECURITY
WCDMA, BTS3900 LST
CN Cabinet No. LTE PORTSECURITY
DSP
PORTSECURITY
PORTSECURITY SET
WCDMA, BTS3900 LST
SRN Subrack No. LTE PORTSECURITY
DSP
PORTSECURITY
PORTSECURITY SET
WCDMA, BTS3900 LST
SN Slot No. LTE PORTSECURITY
PORTSECURITY
DSP
PORTSECURITY
SET
WCDMA, BTS3900 LST
SBT Subboard Type LTE PORTSECURITY
PORTSECURITY
DSP
PORTSECURITY
SET
WCDMA, BTS3900 LST
PT Port Type LTE PORTSECURITY
PORTSECURITY
DSP
PORTSECURITY
SET
WCDMA, BTS3900 LST
PN Port No. LTE PORTSECURITY
PORTSECURITY
SET
PORTSECURITY
DSP
WCDMA, BTS3900 LST
SWITCH Enable Flag LTE PORTSECURITY
ADD PPPLNK
DSP PPPLNK
PPPLNK MOD PPPLNK
BTS3900, BTS3900 RMV PPPLNK
WCDMA, BTS3900 RST PPPLNK
CN Cabinet No. LTE LST PPPLNK
ADD PPPLNK
DSP PPPLNK
PPPLNK MOD PPPLNK
SRN Subrack No. LTE LST PPPLNK
ADD PPPLNK
DSP PPPLNK
PPPLNK MOD PPPLNK
SN Slot No. LTE LST PPPLNK
ADD PPPLNK
DSP PPPLNK
MOD PPPLNK
PPPLNK RMV PPPLNK
BTS3900, BTS3900 RST PPPLNK
PPPLNKN Link No. LTE LST PPPLNK
PPPLNK
BTS3900, BTS3900 ADD PPPLNK

WCDMA, BTS3900 MOD PPPLNK
PN Port No. LTE LST PPPLNK
PPPLNK

AUTH Authentication Type LTE LST PPPLNK
PPPLNK BTS3900, BTS3900 ADD PPPLNK

UN User Name LTE LST PPPLNK

PWD Password LTE LST PPPLNK
PPPLNK

TSN Time Slot No. LTE LST PPPLNK
PPPLNK
ADD PPPLNK
BTS3900, BTS3900 MOD PPPLNK
WCDMA, BTS3900 DSP PPPLNK
LOCALIP Local IP LTE LST PPPLNK
PPPLNK
ADD PPPLNK
IPMASK Mask LTE LST PPPLNK
PPPLNK
ADD PPPLNK
PEERIP Peer IP LTE LST PPPLNK
PPPLNK
ADD PPPLNK
MUXCP PPPMUX LTE LST PPPLNK
PPPLNK

Maximum Length of WCDMA, BTS3900 MOD PPPLNK
MAXSFLEN PPP Mux Subframe LTE LST PPPLNK
PPPLNK

Maximum Length of WCDMA, BTS3900 MOD PPPLNK
MAXMFLEN PPP Muxframe LTE LST PPPLNK
PPPLNK
PPP Muxframe BTS3900, BTS3900 ADD PPPLNK

Combination WCDMA, BTS3900 MOD PPPLNK
MUXTIME Timeout LTE LST PPPLNK
PPPLNK
ADD PPPLNK
IP Header WCDMA, BTS3900 DSP PPPLNK
IPHC Compression LTE LST PPPLNK

IPHCSUBOPT IPHC SubOption LTE LST PPPLNK
PPPLNK
ADD PPPLNK
Maximum Receive WCDMA, BTS3900 DSP PPPLNK
MRU Unit LTE LST PPPLNK
ADD PPPLNK
PPPLNK BTS3900, BTS3900 MOD PPPLNK
Protocol Field WCDMA, BTS3900 DSP PPPLNK
PFC Compression LTE LST PPPLNK
PPPLNK
ADD PPPLNK
Address and BTS3900, BTS3900 MOD PPPLNK
Control Field WCDMA, BTS3900 DSP PPPLNK
ACFC Compression LTE LST PPPLNK

RESTARTTMR Negotiation Time LTE LST PPPLNK
BTS3900, BTS3900
PPPLNK WCDMA, BTS3900
PPPLINKSTATUS Link Status LTE DSP PPPLNK
PPPLNK
BTS3900, BTS3900
WCDMA, BTS3900
LCPSTATUS LCP Status LTE DSP PPPLNK
PPPLNK
BTS3900, BTS3900
WCDMA, BTS3900
IPCPSTATUS IPCP Status LTE DSP PPPLNK
PPPLNK
BTS3900, BTS3900
WCDMA, BTS3900
PPPMUXSTATUS PPPMUX Status LTE DSP PPPLNK
PPPLNK BTS3900, BTS3900

Local IP Negotiation WCDMA, BTS3900
LOCALIPNEGRLT Result LTE DSP PPPLNK

Local IP Mask WCDMA, BTS3900
MASKNEGRLT Negotiation Result LTE DSP PPPLNK

Peer IP Negotiation WCDMA, BTS3900
PEERIPNEGRLT Result LTE DSP PPPLNK
IPHC Negotiation WCDMA, BTS3900
IPHCNEGRLT Result LTE DSP PPPLNK
PPPLNK
BTS3900, BTS3900
ACFCNEGRLT Result LTE DSP PPPLNK

PFCNEGRLT Result LTE DSP PPPLNK
PPPLNK Maximum Receive BTS3900, BTS3900

MRUNEGRLT Result LTE DSP PPPLNK
BTS3900, BTS3900
PPPLNK PPPMUX WCDMA, BTS3900
MUXNEGRLT Negotiation Result LTE DSP PPPLNK

RXPKT Packets LTE DSP PPPLNK

TXPKT Packets LTE DSP PPPLNK
BTS3900, BTS3900
RXFLOW RX Flow LTE DSP PPPLNK
BTS3900, BTS3900
TXFLOW TX Flow LTE DSP PPPLNK

WCDMA, BTS3900
IPNUM Number of IPs LTE DSP PPPLNK
BTS3900, BTS3900
IPLIST IP Address List LTE DSP PPPLNK
PPPLNK PPP Fault Frame BTS3900, BTS3900 ADD PPPLNK

Occurrence WCDMA, BTS3900 MOD PPPLNK
FFAPHOLD Threshold LTE LST PPPLNK

PPP Fault Frame WCDMA, BTS3900 MOD PPPLNK
FFDPHOLD Clear Threshold LTE LST PPPLNK
PPPLNK
ADD PPPLNK
DSP PPPLNK
MOD PPPLNK
SBT Subboard Type LTE LST PPPLNK

RXBYTE Bytes LTE DSP PPPLNK

Number of RX Drop WCDMA, BTS3900
RXDROPPKT Packets LTE DSP PPPLNK

TXBYTE Bytes LTE DSP PPPLNK

TXDROPPKT Packets LTE DSP PPPLNK
BTS3900, BTS3900
PRI2QUE WCDMA, BTS3900 LST PRI2QUE
VRFIDX VRF Index LTE SET PRI2QUE
PRI2QUE
BTS3900, BTS3900
WCDMA, BTS3900 SET PRI2QUE
PRI0 PriOfQue0 LTE LST PRI2QUE
PRI2QUE
BTS3900, BTS3900
PRI2QUE
BTS3900, BTS3900
PRI2QUE
BTS3900, BTS3900
PRI2QUE
BTS3900, BTS3900
PRI2QUE
BTS3900, BTS3900
PRI2QUE
BTS3900, BTS3900
ADD RSCGRP
RSCGRP DSP RSCGRP
BTS3900, BTS3900 MOD RSCGRP
WCDMA, BTS3900 RMV RSCGRP
CN Cabinet No. LTE LST RSCGRP
RSCGRP ADD RSCGRP

DSP RSCGRP
SRN Subrack No. LTE LST RSCGRP
ADD RSCGRP
RSCGRP DSP RSCGRP
SN Slot No. LTE LST RSCGRP
ADD RSCGRP
RSCGRP DSP RSCGRP
Transmission BTS3900, BTS3900 MOD RSCGRP
Resource Group WCDMA, BTS3900 RMV RSCGRP
BEAR Bear Type LTE LST RSCGRP
RSCGRP
ADD RSCGRP
DSP RSCGRP
SBT Subboard Type LTE LST RSCGRP
RSCGRP
ADD RSCGRP
DSP RSCGRP
PT Bearing Port Type LTE LST RSCGRP
RSCGRP
ADD RSCGRP
DSP RSCGRP
PN Bearing Port No. LTE LST RSCGRP
RSCGRP
ADD RSCGRP
DSP RSCGRP
Transmission WCDMA, BTS3900 RMV RSCGRP
RSCGRPID Resource Group ID LTE LST RSCGRP
RSCGRP
ADD RSCGRP
WCDMA, BTS3900 DSP RSCGRP
RU Rate Unit LTE LST RSCGRP
RSCGRP
ADD RSCGRP
TXBW Tx Bandwidth LTE LST RSCGRP
RSCGRP
ADD RSCGRP
RXBW Rx Bandwidth LTE LST RSCGRP
RSCGRP
BTS3900, BTS3900 ADD RSCGRP

TX Committed WCDMA, BTS3900 MOD RSCGRP
TXCBS Burst Size LTE LST RSCGRP
RSCGRP

TX Excessive Burst WCDMA, BTS3900 MOD RSCGRP
TXEBS Size LTE LST RSCGRP
RSCGRP
BTS3900, BTS3900
WCDMA, BTS3900 ADD RSCGRP
OID Operator ID LTE LST RSCGRP
RSCGRP

WCDMA, BTS3900 MOD RSCGRP
WEIGHT Scheduling Weight LTE LST RSCGRP
RSCGRP

TX Committed WCDMA, BTS3900 MOD RSCGRP
TXCIR Information Rate LTE LST RSCGRP
RSCGRP

RX Committed WCDMA, BTS3900 MOD RSCGRP
RXCIR Information Rate LTE LST RSCGRP
RSCGRP

TX Peak WCDMA, BTS3900 MOD RSCGRP
TXPIR Information Rate LTE LST RSCGRP
RSCGRP

RX Peak WCDMA, BTS3900 MOD RSCGRP
RXPIR Information Rate LTE LST RSCGRP
RSCGRP

WCDMA, BTS3900 MOD RSCGRP
TXPBS TX Peak Burst Size LTE LST RSCGRP
RSCGRP
BTS3900, BTS3900
Realtime TX WCDMA, BTS3900
TXRTBW Bandwidth LTE DSP RSCGRP
RSCGRP
BTS3900, BTS3900
Realtime RX WCDMA, BTS3900
RXRTBW Bandwidth LTE DSP RSCGRP
RSCGRP
BTS3900, BTS3900
Non-Realtime TX WCDMA, BTS3900
TXNRTBW Bandwidth LTE DSP RSCGRP
RSCGRP
BTS3900, BTS3900
Non-Realtime RX WCDMA, BTS3900
RXNRTBW Bandwidth LTE DSP RSCGRP
RSCGRP
Non-Realtime BTS3900, BTS3900

Reserved TX WCDMA, BTS3900
TXNRTRESVBW Bandwidth LTE DSP RSCGRP
RSCGRP
Non-Realtime BTS3900, BTS3900

Reserved RX WCDMA, BTS3900
RXNRTRESVBW Bandwidth LTE DSP RSCGRP
RSCGRP BTS3900, BTS3900

WCDMA, BTS3900
TXBWUSED Tx Bandwidth Used LTE DSP RSCGRP

WCDMA, BTS3900
RXBWUSED Rx Bandwidth Used LTE DSP RSCGRP
Tx Bandwidth WCDMA, BTS3900
TXBWUSABLE Usable LTE DSP RSCGRP

Rx Bandwidth WCDMA, BTS3900
RXBWUSABLE Usable LTE DSP RSCGRP
RSCGRP
BTS3900, BTS3900
WCDMA, BTS3900
TXGBRBWRLT GBR Tx Bandwidth LTE DSP RSCGRP
RSCGRP
BTS3900, BTS3900
WCDMA, BTS3900
RXGBRBWRLT GBR Rx Bandwidth LTE DSP RSCGRP

Rate Configuration WCDMA, BTS3900
RATECFGTYPE Type LTE DSP RSCGRP
RSCGRP
BTS3900, BTS3900
UL Admission WCDMA, BTS3900
ULADMINBW Bandwidth LTE DSP RSCGRP
RSCGRP
BTS3900, BTS3900
DL Admission WCDMA, BTS3900
DLADMINBW Bandwidth LTE DSP RSCGRP
RSCGRP
BTS3900, BTS3900
UL CIR Admission WCDMA, BTS3900
ULCIRADMINBW Bandwidth LTE DSP RSCGRP
RSCGRP
BTS3900, BTS3900
DL CIR Admission WCDMA, BTS3900
DLCIRADMINBW Bandwidth LTE DSP RSCGRP
RSCGRP
BTS3900, BTS3900
UL PIR Admission WCDMA, BTS3900
ULPIRADMINBW Bandwidth LTE DSP RSCGRP
RSCGRP
BTS3900, BTS3900
DL PIR Admission WCDMA, BTS3900
DLPIRADMINBW Bandwidth LTE DSP RSCGRP

TXLGCPORTFLO WCDMA, BTS3900
W Realtime Tx Traffic LTE DSP RSCGRP
RSCGRPALG
BTS3900, BTS3900
WCDMA, BTS3900 SET RSCGRPALG
CN Cabinet No. LTE LST RSCGRPALG
RSCGRPALG
BTS3900, BTS3900
SRN Subrack No. LTE LST RSCGRPALG
RSCGRPALG
BTS3900, BTS3900
SN Slot No. LTE LST RSCGRPALG
RSCGRPALG
BTS3900, BTS3900
SBT Subboard Type LTE LST RSCGRPALG
RSCGRPALG
Transmission BTS3900, BTS3900
Resource Group WCDMA, BTS3900 SET RSCGRPALG
BEAR Bear Type LTE LST RSCGRPALG
RSCGRPALG
BTS3900, BTS3900
PT Bearing Port Type LTE LST RSCGRPALG
RSCGRPALG
BTS3900, BTS3900
PN Bearing Port No. LTE LST RSCGRPALG
RSCGRPALG
BTS3900, BTS3900
Transmission WCDMA, BTS3900 SET RSCGRPALG
RSCGRPID Resource Group ID LTE LST RSCGRPALG
RSCGRPALG
BTS3900, BTS3900
TX Traffic Shaping WCDMA, BTS3900 SET RSCGRPALG
TXSSW Switch LTE LST RSCGRPALG
RSCGRPALG
BTS3900, BTS3900
TX Bandwidth WCDMA, BTS3900 SET RSCGRPALG
TXBWASW Adjustment Switch LTE LST RSCGRPALG
RSCGRPALG
BTS3900, BTS3900
RX Bandwidth WCDMA, BTS3900 SET RSCGRPALG
RXBWASW Adjustment Switch LTE LST RSCGRPALG
RSCGRPALG
BTS3900, BTS3900
Packet Loss Ratio WCDMA, BTS3900 SET RSCGRPALG
PLRDTH Down Threshold LTE LST RSCGRPALG
RSCGRPALG
BTS3900, BTS3900
Delay Variation WCDMA, BTS3900 SET RSCGRPALG
DDTH Down Threshold LTE LST RSCGRPALG
RSCGRPALG
BTS3900, BTS3900
TX Bandwidth WCDMA, BTS3900 SET RSCGRPALG
TXBWAMIN Adjust Minimum LTE LST RSCGRPALG
RSCGRPALG
BTS3900, BTS3900
RX Bandwidth WCDMA, BTS3900 SET RSCGRPALG
RXBWAMIN Adjust Minimum LTE LST RSCGRPALG
RSCGRPALG
BTS3900, BTS3900
Traffic Control WCDMA, BTS3900 SET RSCGRPALG
TCSW Switch LTE LST RSCGRPALG
RSCGRPALG
BTS3900, BTS3900
OM FTP Traffic WCDMA, BTS3900 SET RSCGRPALG
OMTCSW Control Switch LTE LST RSCGRPALG
RSCGRPALG
BTS3900, BTS3900
PQN PQ Number LTE LST RSCGRPALG
RSCGRPALG
BTS3900, BTS3900
Congestion Time WCDMA, BTS3900 SET RSCGRPALG
CTTH Threshold LTE LST RSCGRPALG
RSCGRPALG
BTS3900, BTS3900
Congestion Clear WCDMA, BTS3900 SET RSCGRPALG
CCTTH Time Threshold LTE LST RSCGRPALG
RSCGRPALG
BTS3900, BTS3900
TX Reserved WCDMA, BTS3900 SET RSCGRPALG
TXRSVBW Bandwidth LTE LST RSCGRPALG
RSCGRPALG
BTS3900, BTS3900
RX Reserved WCDMA, BTS3900 SET RSCGRPALG
RXRSVBW Bandwidth LTE LST RSCGRPALG
RSCGRPALG
BTS3900, BTS3900
Drop Packet WCDMA, BTS3900 SET RSCGRPALG
DROPPKTNUM Number Threshold LTE LST RSCGRPALG
ADD SCTPHOST
SCTPHOST LST SCTPHOST
BTS3900, BTS3900 MOD SCTPHOST
SCTPHOSTID SCTP Host ID LTE RMV SCTPHOST
SCTPHOST
ADD SCTPHOST
VRFIDX VRF Index LTE LST SCTPHOST
SCTPHOST
ADD SCTPHOST
IPVERSION IP Version LTE LST SCTPHOST
SCTPHOST
ADD SCTPHOST
First Local IP BTS3900, BTS3900 MOD SCTPHOST
SIGIP1V4 Address LTE LST SCTPHOST
SCTPHOST
ADD SCTPHOST
First Local IPv6 BTS3900, BTS3900 MOD SCTPHOST
SCTPHOST
ADD SCTPHOST
SIGIP1SECSWITC IPSec Switch for BTS3900, BTS3900 MOD SCTPHOST
H First Local IP LTE LST SCTPHOST
SCTPHOST
ADD SCTPHOST
SIGIP1SECHOSTI Security Host ID for BTS3900, BTS3900 MOD SCTPHOST
D First Local IP LTE LST SCTPHOST
SCTPHOST
ADD SCTPHOST
Second Local IP BTS3900, BTS3900 MOD SCTPHOST
SCTPHOST
ADD SCTPHOST
Second Local IPv6 BTS3900, BTS3900 MOD SCTPHOST
SCTPHOST
ADD SCTPHOST
SIGIP2SECSWITC IPSec Switch for BTS3900, BTS3900 MOD SCTPHOST
H Second Local IP LTE LST SCTPHOST
SCTPHOST
ADD SCTPHOST
SIGIP2SECHOSTI Security Host ID for BTS3900, BTS3900 MOD SCTPHOST
D Second Local IP LTE LST SCTPHOST
SCTPHOST
ADD SCTPHOST
Local SCTP Port BTS3900, BTS3900 MOD SCTPHOST
PN No. LTE LST SCTPHOST
SCTPHOST
ADD SCTPHOST
SCTP Parameters BTS3900, BTS3900 MOD SCTPHOST
SCTPTEMPLATEID Template ID LTE LST SCTPHOST
SCTPHOST ADD SCTPHOST

USERLABEL User Label LTE LST SCTPHOST
ADD SCTPLNK
BLK SCTPLNK
DSP SCTPLNK
SCTPLNK LST SCTPLNK
MOD SCTPLNK
BTS3900, BTS3900 RMV SCTPLNK
WCDMA, BTS3900 RST SCTPLNK
SCTPNO Link No. LTE UBL SCTPLNK
BTS3900, BTS3900 ADD SCTPLNK
SCTPLNK WCDMA, BTS3900 DSP SCTPLNK
CN Cabinet No. LTE LST SCTPLNK
SRN Subrack No. LTE LST SCTPLNK
SN Slot No. LTE LST SCTPLNK
SCTPLNK BTS3900, BTS3900 ADD SCTPLNK

Maximum Stream WCDMA, BTS3900 MOD SCTPLNK
MAXSTREAM No. LTE LST SCTPLNK
SCTPLNK

WCDMA, BTS3900 MOD SCTPLNK
CTRLMODE Control Mode LTE LST SCTPLNK
SCTPLNK
ADD SCTPLNK
BTS3900, BTS3900 MOD SCTPLNK
First Local IP WCDMA, BTS3900 DSP SCTPLNK
LOCIP Address LTE LST SCTPLNK
SCTPLNK
ADD SCTPLNK
Second Local IP WCDMA, BTS3900 DSP SCTPLNK
SECLOCIP Address LTE LST SCTPLNK
ADD SCTPLNK
SCTPLNK BTS3900, BTS3900 MOD SCTPLNK
Local SCTP Port WCDMA, BTS3900 DSP SCTPLNK
LOCPORT No. LTE LST SCTPLNK
SCTPLNK
ADD SCTPLNK
First Peer IP WCDMA, BTS3900 DSP SCTPLNK
PEERIP Address LTE LST SCTPLNK
SCTPLNK
ADD SCTPLNK
Second Peer IP WCDMA, BTS3900 DSP SCTPLNK
SECPEERIP Address LTE LST SCTPLNK
ADD SCTPLNK
SCTPLNK BTS3900, BTS3900 MOD SCTPLNK
Peer SCTP Port WCDMA, BTS3900 DSP SCTPLNK
PEERPORT No. LTE LST SCTPLNK
SCTPLNK

RTOMIN RTO Min Value LTE LST SCTPLNK
SCTPLNK

RTOMAX RTO Max Value LTE LST SCTPLNK
SCTPLNK

RTOINIT RTO Initial Value LTE LST SCTPLNK
SCTPLNK

RTOALPHA RTO Alpha Value LTE LST SCTPLNK
SCTPLNK

RTOBETA RTO Beta Value LTE LST SCTPLNK
SCTPLNK

HBINTER Heart-beat Interval LTE LST SCTPLNK
SCTPLNK

Max Association WCDMA, BTS3900 MOD SCTPLNK
MAXASSOCRETR Retransmission LTE LST SCTPLNK
SCTPLNK

Max Path WCDMA, BTS3900 MOD SCTPLNK
MAXPATHRETR Retransmission LTE LST SCTPLNK
SCTPLNK

Checksum WCDMA, BTS3900 MOD SCTPLNK
CHKSUMTYPE Arithmetic Type LTE LST SCTPLNK
SCTPLNK

AUTOSWITCH Switch Back Flag LTE LST SCTPLNK
SCTPLNK

SWITCHBACKHBN Heart-beat Times WCDMA, BTS3900 MOD SCTPLNK
UM When Switch Back LTE LST SCTPLNK
SCTPLNK
BTS3900, BTS3900
WCDMA, BTS3900
ASSOCSTATE SCTP Link Status LTE DSP SCTPLNK
SCTPLNK
BTS3900, BTS3900
Status Change WCDMA, BTS3900
TRANSFERCAUSE Cause LTE DSP SCTPLNK
SCTPLNK
BTS3900, BTS3900
Status Change WCDMA, BTS3900
TRANSFERTIME Time LTE DSP SCTPLNK
SCTPLNK BTS3900, BTS3900
WCDMA, BTS3900
OUTSTREAM Out Stream Number LTE DSP SCTPLNK

WCDMA, BTS3900
INSTREAM In Stream Number LTE DSP SCTPLNK

WCDMA, BTS3900
WORKADDRFLAG Work Address Flag LTE DSP SCTPLNK
BTS3900, BTS3900
BLKFLAG Block Flag LTE LST SCTPLNK
SCTPLNK

TSACK SACK Timeout LTE LST SCTPLNK
SCTPLNK BTS3900, BTS3900 ADD SCTPLNK

DESCRI Description Info LTE LST SCTPLNK
SCTPLNK
BTS3900, BTS3900
WCDMA, BTS3900
AUTOCFGFLAG Auto Config Flag LTE LST SCTPLNK
SCTPLNK
VRFIDX VRF Index LTE LST SCTPLNK
ADD SCTPLNK6
BLK SCTPLNK6
DSP SCTPLNK6
SCTPLNK6 LST SCTPLNK6
MOD SCTPLNK6
RMV SCTPLNK6
BTS3900, BTS3900 RST SCTPLNK6
SCTPNO Link No. LTE UBL SCTPLNK6
SCTPLNK6 ADD SCTPLNK6

Maximum Stream BTS3900, BTS3900 MOD SCTPLNK6
MAXSTREAM No. LTE LST SCTPLNK6
SCTPLNK6
ADD SCTPLNK6
BTS3900, BTS3900 MOD SCTPLNK6
CTRLMODE Control Mode LTE LST SCTPLNK6
SCTPLNK6
ADD SCTPLNK6
MOD SCTPLNK6
First Local IPv6 BTS3900, BTS3900 DSP SCTPLNK6
LOCIP Address LTE LST SCTPLNK6
SCTPLNK6
ADD SCTPLNK6
MOD SCTPLNK6
Second Local IPv6 BTS3900, BTS3900 DSP SCTPLNK6
SECLOCIP Address LTE LST SCTPLNK6
SCTPLNK6
ADD SCTPLNK6
MOD SCTPLNK6
Local IPv6 SCTP BTS3900, BTS3900 DSP SCTPLNK6
LOCPORT Port No. LTE LST SCTPLNK6
SCTPLNK6
ADD SCTPLNK6
MOD SCTPLNK6
First Peer IPv6 BTS3900, BTS3900 DSP SCTPLNK6
PEERIP Address LTE LST SCTPLNK6
SCTPLNK6
ADD SCTPLNK6
MOD SCTPLNK6
Second Peer IPv6 BTS3900, BTS3900 DSP SCTPLNK6
SECPEERIP Address LTE LST SCTPLNK6
SCTPLNK6
ADD SCTPLNK6
MOD SCTPLNK6
Peer IPv6 SCTP BTS3900, BTS3900 DSP SCTPLNK6
PEERPORT Port No. LTE LST SCTPLNK6
SCTPLNK6
ADD SCTPLNK6
RTOMIN RTO Min Value LTE LST SCTPLNK6
SCTPLNK6
ADD SCTPLNK6
RTOMAX RTO Max Value LTE LST SCTPLNK6
SCTPLNK6
ADD SCTPLNK6
RTOINIT RTO Initial Value LTE LST SCTPLNK6
SCTPLNK6
ADD SCTPLNK6
RTOALPHA RTO Alpha Value LTE LST SCTPLNK6
SCTPLNK6
ADD SCTPLNK6
RTOBETA RTO Beta Value LTE LST SCTPLNK6
SCTPLNK6
ADD SCTPLNK6
HBINTER Heart-beat Interval LTE LST SCTPLNK6
SCTPLNK6
ADD SCTPLNK6
Max Association BTS3900, BTS3900 MOD SCTPLNK6
MAXASSOCRETR Retransmission LTE LST SCTPLNK6
SCTPLNK6
ADD SCTPLNK6
Max Path BTS3900, BTS3900 MOD SCTPLNK6
MAXPATHRETR Retransmission LTE LST SCTPLNK6
SCTPLNK6
ADD SCTPLNK6
Checksum BTS3900, BTS3900 MOD SCTPLNK6
CHKSUMTYPE Algorithm Type LTE LST SCTPLNK6
SCTPLNK6
ADD SCTPLNK6
SWITCHBACKFLA BTS3900, BTS3900 MOD SCTPLNK6
G Switch Back Flag LTE LST SCTPLNK6
SCTPLNK6
ADD SCTPLNK6
SWITCHBACKHBN Heart-beat Times BTS3900, BTS3900 MOD SCTPLNK6
UM When Switch Back LTE LST SCTPLNK6
SCTPLNK6
IPv6 SCTP Link BTS3900, BTS3900

ASSOCSTATE Status LTE DSP SCTPLNK6
SCTPLNK6
Status Change BTS3900, BTS3900

TRANSFERCAUSE Cause LTE DSP SCTPLNK6
SCTPLNK6
Status Change BTS3900, BTS3900

TRANSFERTIME Time LTE DSP SCTPLNK6
SCTPLNK6
BTS3900, BTS3900
OUTSTREAM Out Stream Number LTE DSP SCTPLNK6
SCTPLNK6
BTS3900, BTS3900
INSTREAM In Stream Number LTE DSP SCTPLNK6
SCTPLNK6
BTS3900, BTS3900
WORKADDRFLAG Work Address Flag LTE DSP SCTPLNK6
SCTPLNK6
BTS3900, BTS3900 DSP SCTPLNK6
BLKFLAG Block Flag LTE LST SCTPLNK6
SCTPLNK6 ADD SCTPLNK6

DESCRI Description Info LTE LST SCTPLNK6
SCTPLNK6
BTS3900, BTS3900
AUTOCFGFLAG Auto Config Flag LTE LST SCTPLNK6
SCTPLNK6
ADD SCTPLNK6
TSACK Sack Timeout LTE LST SCTPLNK6
ADD SCTPPEER
SCTPPEER LST SCTPPEER
BTS3900, BTS3900 MOD SCTPPEER
SCTPPEERID SCTP Peer ID LTE RMV SCTPPEER
SCTPPEER
ADD SCTPPEER
VRFIDX VRF Index LTE LST SCTPPEER
SCTPPEER
ADD SCTPPEER
IPVERSION IP Version LTE LST SCTPPEER
SCTPPEER
ADD SCTPPEER
First Peer IP BTS3900, BTS3900 MOD SCTPPEER
SIGIP1V4 Address LTE LST SCTPPEER
SCTPPEER
ADD SCTPPEER
First Peer IPv6 BTS3900, BTS3900 MOD SCTPPEER
SCTPPEER
ADD SCTPPEER
SIGIP1SECSWITC IPSec Switch for BTS3900, BTS3900 MOD SCTPPEER
H First Peer IP LTE LST SCTPPEER
SCTPPEER
ADD SCTPPEER
SIGIP1SECPEERI Security Peer ID for BTS3900, BTS3900 MOD SCTPPEER
D First Peer IP LTE LST SCTPPEER
SCTPPEER
ADD SCTPPEER
Second Peer IP BTS3900, BTS3900 MOD SCTPPEER
SCTPPEER
ADD SCTPPEER
Second Peer IPv6 BTS3900, BTS3900 MOD SCTPPEER
SCTPPEER
ADD SCTPPEER
SIGIP2SECSWITC IPSec Switch for BTS3900, BTS3900 MOD SCTPPEER
H Second Peer IP LTE LST SCTPPEER
SCTPPEER
ADD SCTPPEER
SIGIP2SECPEERI Security Peer ID for BTS3900, BTS3900 MOD SCTPPEER
D Second Peer IP LTE LST SCTPPEER
SCTPPEER
ADD SCTPPEER
Peer SCTP Port BTS3900, BTS3900 MOD SCTPPEER
PN No. LTE LST SCTPPEER
SCTPPEER
ADD SCTPPEER
REMOTEID Remote ID LTE LST SCTPPEER
SCTPPEER
ADD SCTPPEER
CTRLMODE Control Mode LTE LST SCTPPEER
SCTPPEER
BTS3900, BTS3900
AUTOCFGFLAG Auto Config Flag LTE LST SCTPPEER
SCTPPEER ADD SCTPPEER

USERLABEL User Label LTE LST SCTPPEER
ADD
SCTPTEMPLATE
LST
SCTPTEMPLATE SCTPTEMPLATE
MOD
SCTPTEMPLATE
SCTP Parameters BTS3900, BTS3900 RMV
SCTPTEMPLATEID Template ID LTE SCTPTEMPLATE
SCTPTEMPLATE
ADD
SCTPTEMPLATE
MOD
SCTPTEMPLATE
RTOMIN RTO Min Value LTE SCTPTEMPLATE
SCTPTEMPLATE
ADD
SCTPTEMPLATE
MOD
SCTPTEMPLATE
RTOMAX RTO Max Value LTE SCTPTEMPLATE
SCTPTEMPLATE ADD
SCTPTEMPLATE
MOD
SCTPTEMPLATE
RTOINIT RTO Initial Value LTE SCTPTEMPLATE
SCTPTEMPLATE
ADD
SCTPTEMPLATE
MOD
SCTPTEMPLATE
RTOALPHA RTO Alpha Value LTE SCTPTEMPLATE
SCTPTEMPLATE
ADD
SCTPTEMPLATE
MOD
SCTPTEMPLATE
RTOBETA RTO Beta Value LTE SCTPTEMPLATE
SCTPTEMPLATE
ADD
SCTPTEMPLATE
MOD
SCTPTEMPLATE
HBINTER Heart-beat Interval LTE SCTPTEMPLATE
SCTPTEMPLATE
ADD
SCTPTEMPLATE
MOD
SCTPTEMPLATE
Max Association BTS3900, BTS3900 LST
MAXASSOCRETR Retransmission LTE SCTPTEMPLATE
SCTPTEMPLATE
ADD
SCTPTEMPLATE
MOD
SCTPTEMPLATE
Max Path BTS3900, BTS3900 LST
MAXPATHRETR Retransmission LTE SCTPTEMPLATE
SCTPTEMPLATE
ADD
SCTPTEMPLATE
MOD
SCTPTEMPLATE
SWITCHBACKFLA BTS3900, BTS3900 LST
G Switch Back Flag LTE SCTPTEMPLATE
SCTPTEMPLATE
ADD
SCTPTEMPLATE
MOD
SCTPTEMPLATE
SWITCHBACHHBN Heart-beat Times BTS3900, BTS3900 LST
UM When Switch Back LTE SCTPTEMPLATE
SCTPTEMPLATE
ADD
SCTPTEMPLATE
MOD
SCTPTEMPLATE
TSACK SACK Timeout LTE SCTPTEMPLATE
ADD
SCTPTEMPLATE
SCTPTEMPLATE MOD
SCTPTEMPLATE
Checksum BTS3900, BTS3900 LST
CHKSUMTYPE Arithmetic Type LTE SCTPTEMPLATE
ADD
SCTPTEMPLATE
SCTPTEMPLATE MOD
SCTPTEMPLATE
Maximum Stream BTS3900, BTS3900 LST
MAXSTREAM No. LTE SCTPTEMPLATE
ADD
SECURITYHOST
LST
SECURITYHOST SECURITYHOST
MOD
BTS3900, BTS3900 SECURITYHOST
WCDMA, BTS3900 RMV
SECURITYHOSTID Security Host ID LTE SECURITYHOST
SECURITYHOST
ADD
SECURITYHOST
MOD
WCDMA, BTS3900 LST
SEGWSWITCH SeGW Switch LTE SECURITYHOST
ADD
SECURITYHOST
SECURITYHOST MOD
SEGWCONFIGMO WCDMA, BTS3900 LST
DE SeGW Config Mode LTE SECURITYHOST
ADD
SECURITYHOST
SECURITYHOST MOD
WCDMA, BTS3900 LST
IPVERSION IP Version LTE SECURITYHOST
SECURITYHOST
ADD
SECURITYHOST
MOD
Local IKE IP WCDMA, BTS3900 LST
LOCIKEIPV4 Address LTE SECURITYHOST
SECURITYHOST
ADD
SECURITYHOST
MOD
SECURITYHOST
Local IKE IPv6 BTS3900, BTS3900 LST
LOCIKEIPV6 Address LTE SECURITYHOST
SECURITYHOST ADD
SECURITYHOST
MOD
WCDMA, BTS3900 LST
PEERNAME IKE Peer Name LTE SECURITYHOST
SECURITYHOST ADD
SECURITYHOST
MOD
IPSec Proposal WCDMA, BTS3900 LST
IPSECPROPNAME Name LTE SECURITYHOST
ADD
SECURITYHOST
SECURITYHOST MOD
Security BTS3900, BTS3900 SECURITYHOST
SECURITYTEMPL Parameters WCDMA, BTS3900 LST
ATEID Template ID LTE SECURITYHOST
ADD
SECURITYHOST
SECURITYHOST MOD
WCDMA, BTS3900 LST
USERLABEL User Label LTE SECURITYHOST
ADD
SECURITYPEER
LST
SECURITYPEER SECURITYPEER
MOD
BTS3900, BTS3900 SECURITYPEER
WCDMA, BTS3900 RMV
SECURITYPEERID Security Peer ID LTE SECURITYPEER
SECURITYPEER
ADD
SECURITYPEER
MOD
WCDMA, BTS3900 LST
SEGWSWITCH SeGW Switch LTE SECURITYPEER
ADD
SECURITYPEER
SECURITYPEER MOD
WCDMA, BTS3900 LST
IPVERSION IP Version LTE SECURITYPEER
SECURITYPEER
ADD
SECURITYPEER
MOD
Peer IKE IP WCDMA, BTS3900 LST
PEERIKEIPV4 Address LTE SECURITYPEER
SECURITYPEER
ADD
SECURITYPEER
MOD
SECURITYPEER
Peer IKE IPv6 BTS3900, BTS3900 LST
PEERIKEIPV6 Address LTE SECURITYPEER
ADD
SECURITYPEER
SECURITYPEER MOD
WCDMA, BTS3900 LST
PEERNAME IKE Peer Name LTE SECURITYPEER
ADD
SECURITYPEER SECURITYPEER
MOD
IPSec Proposal WCDMA, BTS3900 LST
IPSECPROPNAME Name LTE SECURITYPEER
SECURITYPEER
ADD
SECURITYPEER
MOD
WCDMA, BTS3900 LST
CTRLMODE Control Mode LTE SECURITYPEER
ADD
SECURITYPEER
SECURITYPEER MOD
WCDMA, BTS3900 LST
USERLABEL User Label LTE SECURITYPEER
SECURITYPEER
BTS3900, BTS3900
WCDMA, BTS3900 LST
AUTOCFGFLAG Auto Config Flag LTE SECURITYPEER
ADD
SECURITYTEMPL
ATE
LST
SECURITYTEMPL
SECURITYTEMPLA ATE
MOD
SECURITYTEMPL
ATE
Security BTS3900, BTS3900 RMV
SECURITYTEMPL Parameters WCDMA, BTS3900 SECURITYTEMPL
ATEID Template ID LTE ATE
SECURITYTEMPLA
ADD
SECURITYTEMPL
ATE
MOD
SECURITYTEMPL
ATE
WCDMA, BTS3900 SECURITYTEMPL
SEGWSWITCH SeGW Switch LTE ATE
ADD
SECURITYTEMPL
ATE
MOD
SECURITYTEMPLA
SECURITYTEMPL
ATE
PROPID IKE Proposal ID LTE ATE
ADD
SECURITYTEMPL
ATE
MOD
SECURITYTEMPLA SECURITYTEMPL
ATE
IPSec Proposal WCDMA, BTS3900 SECURITYTEMPL
IPSECPROPNAME Name LTE ATE
ADD
SECURITYTEMPL
ATE
MOD
ATE
IKEVERSION IKE Version LTE ATE
SECURITYTEMPLA
ADD
SECURITYTEMPL
ATE
MOD
SECURITYTEMPL
ATE
EXCHMODE Exchange Mode LTE ATE
ADD
SECURITYTEMPL
ATE
MOD
SECURITYTEMPLA
SECURITYTEMPL
ATE
PKEY Pre-shared Key LTE ATE
SECURITYTEMPLA
ADD
SECURITYTEMPL
ATE
MOD
SECURITYTEMPL
ATE
DPD DPD Mode LTE ATE
SECURITYTEMPLA
ADD
SECURITYTEMPL
ATE
MOD
SECURITYTEMPL
ATE
DPDIDLETIME DPD Idle Time LTE ATE
ADD
SECURITYTEMPL
ATE
SECURITYTEMPLA MOD
SECURITYTEMPL
ATE
DPD BTS3900, BTS3900 LST
Retransmission WCDMA, BTS3900 SECURITYTEMPL
DPDRETRI Interval LTE ATE
ADD
SECURITYTEMPL
ATE
MOD
ATE
DPD BTS3900, BTS3900 LST
Retransmission WCDMA, BTS3900 SECURITYTEMPL
DPDRETRN Count LTE ATE
SECURITYTEMPLA
ADD
SECURITYTEMPL
ATE
MOD
SECURITYTEMPL
ATE
Perfect Forward WCDMA, BTS3900 SECURITYTEMPL
PFS Security LTE ATE
SECURITYTEMPLA
ADD
SECURITYTEMPL
ATE
MOD
SECURITYTEMPL
ATE
LTCFG SA Duration Mode LTE ATE
SECURITYTEMPLA
ADD
SECURITYTEMPL
ATE
MOD
SECURITYTEMPL
ATE
Lifetime Based On WCDMA, BTS3900 SECURITYTEMPL
LTS Time LTE ATE
SECURITYTEMPLA
ADD
SECURITYTEMPL
ATE
MOD
SECURITYTEMPL
ATE
Lifetime Based On WCDMA, BTS3900 SECURITYTEMPL
LTKB Traffic LTE ATE
SECURITYTEMPLA
ADD
SECURITYTEMPL
ATE
MOD
SECURITYTEMPL
ATE
Anti-Replay WCDMA, BTS3900 SECURITYTEMPL
REPLAYWND Window Size LTE ATE
SUBIF BTS3900, BTS3900 ADD SUBIF
WCDMA, BTS3900 RMV SUBIF
CN Cabinet No. LTE LST SUBIF

SRN Subrack No. LTE LST SUBIF

SN Slot No. LTE LST SUBIF

SBT Subboard Type LTE LST SUBIF
BTS3900, BTS3900 ADD SUBIF
SUBIF WCDMA, BTS3900 RMV SUBIF
ID Sub-interface No. LTE LST SUBIF
BTS3900, BTS3900
SUBIF WCDMA, BTS3900 ADD SUBIF
PT Port Type LTE LST SUBIF
BTS3900, BTS3900
PN Port No. LTE LST SUBIF
SUBIF BTS3900, BTS3900

WCDMA, BTS3900 ADD SUBIF
VRFIDX VRF Index LTE LST SUBIF
BTS3900, BTS3900
ARPPROXY ARP Proxy LTE LST SUBIF
ADD
SUBNETVLAN
LST SUBNETVLAN
SUBNETVLAN MOD
BTS3900, BTS3900 SUBNETVLAN
WCDMA, BTS3900 RMV
IP IP Address LTE SUBNETVLAN
ADD
SUBNETVLAN
LST SUBNETVLAN
SUBNETVLAN MOD
BTS3900, BTS3900 SUBNETVLAN
WCDMA, BTS3900 RMV
MASK Mask LTE SUBNETVLAN
ADD
SUBNETVLAN
SUBNETVLAN BTS3900, BTS3900 MOD
WCDMA, BTS3900 SUBNETVLAN
VLANID VLAN ID LTE LST SUBNETVLAN
TACALG
Resource Group
Uplink Admission
RSCGRPULCACS Control Algorithm BTS3900, BTS3900 SET TACALG
WITCH Switch LTE LST TACALG
TACALG
Resource Group
Downlink Admission
RSCGRPDLCACS Control Algorithm BTS3900, BTS3900 SET TACALG
WITCH Switch LTE LST TACALG
TACALG
Uplink Handover
Service Admission BTS3900, BTS3900 SET TACALG
TRMULHOCACTH Threshold LTE LST TACALG
TACALG
Downlink Handover
Service Admission BTS3900, BTS3900 SET TACALG
TRMDLHOCACTH Threshold LTE LST TACALG
TACALG
Uplink Golden New

TRMULGOLDCAC Service Admission BTS3900, BTS3900 SET TACALG
TH Threshold LTE LST TACALG
TACALG
Downlink Golden
New Service
TRMDLGOLDCAC Admission BTS3900, BTS3900 SET TACALG
TH Threshold LTE LST TACALG
TACALG
Uplink Silver New

TRMULSILVERCA Service Admission BTS3900, BTS3900 SET TACALG
CTH Threshold LTE LST TACALG
TACALG
Downlink Silver
New Service
TRMDLSILVERCA Admission BTS3900, BTS3900 SET TACALG
CTH Threshold LTE LST TACALG
TACALG
Uplink Bronze New

TRMULBRONZEC Service Admission BTS3900, BTS3900 SET TACALG
ACTH Threshold LTE LST TACALG
TACALG
Downlink Bronze
New Service
TRMDLBRONZEC Admission BTS3900, BTS3900 SET TACALG
ACTH Threshold LTE LST TACALG
TACALG
Uplink GBR Service

TRMULGBRCACT Admission BTS3900, BTS3900 SET TACALG
H Threshold LTE LST TACALG
TACALG
Downlink GBR
TRMDLGBRCACT Service Admission BTS3900, BTS3900 SET TACALG
H Threshold LTE LST TACALG
TACALG
Uplink Pre-emption BTS3900, BTS3900 SET TACALG

TRMULPRESW Algorithm Switch LTE LST TACALG
TACALG
Downlink Pre-
emption Algorithm BTS3900, BTS3900 SET TACALG
TRMDLPRESW Switch LTE LST TACALG
TACALG
Physical Port Up
Link OverBooking BTS3900, BTS3900 SET TACALG
PORTULOBSW Switch LTE LST TACALG
TACALG
Physical Port Down

Link OverBooking BTS3900, BTS3900 SET TACALG
PORTDLOBSW Switch LTE LST TACALG
TACALG
Physical Port Up
Link Admission BTS3900, BTS3900 SET TACALG
PORTULCACSW Switch LTE LST TACALG
TACALG
Physical Port Down

Link Admission BTS3900, BTS3900 SET TACALG
PORTDLCACSW Switch LTE LST TACALG
TLDRALG
Uplink High Load BTS3900, BTS3900 SET TLDRALG

TRMULLDRTRGTH Trigger Threshold LTE LST TLDRALG
TLDRALG
Downlink High Load BTS3900, BTS3900 SET TLDRALG

TRMDLLDRTRGTH Trigger Threshold LTE LST TLDRALG
TLDRALG
Uplink High Load BTS3900, BTS3900 SET TLDRALG

TRMULLDRCLRTH Clear Threshold LTE LST TLDRALG
TLDRALG
Downlink High Load BTS3900, BTS3900 SET TLDRALG

TRMDLLDRCLRTH Clear Threshold LTE LST TLDRALG
TLDRALG
Uplink Medium
TRMULMLDTRGT Load Trigger BTS3900, BTS3900 SET TLDRALG
H Threshold LTE LST TLDRALG
TLDRALG
Downlink Medium
TRMDLMLDTRGT Load Trigger BTS3900, BTS3900 SET TLDRALG
H Threshold LTE LST TLDRALG
TLDRALG
Uplink Medium
Load Clear BTS3900, BTS3900 SET TLDRALG
TRMULMLDCLRTH Threshold LTE LST TLDRALG
TLDRALG
Downlink Medium
Load Clear BTS3900, BTS3900 SET TLDRALG
TRMDLMLDCLRTH Threshold LTE LST TLDRALG
TLFRSWITCH
Transmission Link BTS3900, BTS3900

Fault Recover WCDMA, BTS3900 SET TLFRSWITCH
TLFRSWITCH Switch LTE LST TLFRSWITCH
TOLCALG
TRMULOLCSWITC Uplink OLC BTS3900, BTS3900 SET TOLCALG

H Algorithm Switch LTE LST TOLCALG
TOLCALG
TRMDLOLCSWITC Downlink OLC BTS3900, BTS3900 SET TOLCALG

H Algorithm Switch LTE LST TOLCALG
TOLCALG
TRMULOLCTRIGT Uplink OLC Trigger BTS3900, BTS3900 SET TOLCALG

H Threshold LTE LST TOLCALG
TOLCALG
Uplink OLC BTS3900, BTS3900 SET TOLCALG

TRMULOLCRELTH Release Threshold LTE LST TOLCALG
TOLCALG
Number of Bearers
TRMOLCRELBEAR Released During BTS3900, BTS3900 SET TOLCALG
ERNUM OLC LTE LST TOLCALG
TOLCALG
TRMDLOLCTRIGT Downlink OLC BTS3900, BTS3900 SET TOLCALG

H Trigger Threshold LTE LST TOLCALG
TOLCALG
Downlink OLC BTS3900, BTS3900 SET TOLCALG

TRMDLOLCRELTH Release Threshold LTE LST TOLCALG
ADD TUNNEL
TUNNEL DSP TUNNEL
BTS3900, BTS3900 MOD TUNNEL
WCDMA, BTS3900 RMV TUNNEL
SCN Source Cabinet No. LTE LST TUNNEL
ADD TUNNEL
TUNNEL DSP TUNNEL
Source Subrack WCDMA, BTS3900 RMV TUNNEL
SSRN No. LTE LST TUNNEL
ADD TUNNEL
TUNNEL DSP TUNNEL
SSN Source Slot No. LTE LST TUNNEL
ADD TUNNEL
TUNNEL DSP TUNNEL
TUNNELID Tunnel No. LTE LST TUNNEL
TUNNEL ADD TUNNEL

Destination Cabinet WCDMA, BTS3900 DSP TUNNEL
DCN No. LTE LST TUNNEL
TUNNEL ADD TUNNEL

Destination WCDMA, BTS3900 DSP TUNNEL
DSRN Subrack No. LTE LST TUNNEL
TUNNEL ADD TUNNEL

WCDMA, BTS3900 DSP TUNNEL
DSN Destination Slot No. LTE LST TUNNEL
TUNNEL
BTS3900, BTS3900 ADD TUNNEL
WCDMA, BTS3900 MOD TUNNEL
TUNNELTYPE Tunnel Type LTE LST TUNNEL
TUNNEL BTS3900, BTS3900

RCVBYTE Bytes LTE DSP TUNNEL

RCVPACKET Packets LTE DSP TUNNEL

SENDBYTE Bytes LTE DSP TUNNEL

SENDPACKET Packets LTE DSP TUNNEL
ADD UDPSESSION
DSP UDPSESSION
LST UDPSESSION
UDPSESSION MOD
BTS3900, BTS3900 UDPSESSION
WCDMA, BTS3900 RMV
UDPSN UDP Session ID LTE UDPSESSION
ADD UDPSESSION
MOD
UDPSESSION UDPSESSION
BTS3900, BTS3900 UDPECHO
WCDMA, BTS3900 DSP UDPSESSION
CN Cabinet No. LTE LST UDPSESSION
ADD UDPSESSION
MOD
SRN Subrack No. LTE LST UDPSESSION
ADD UDPSESSION
MOD
SN Slot No. LTE LST UDPSESSION
UDPSESSION
ADD UDPSESSION
MOD
UDPSESSION
LOCALIP Local IP Address LTE LST UDPSESSION
UDPSESSION
ADD UDPSESSION
MOD
UDPSESSION
PEERIP Peer IP Address LTE LST UDPSESSION
ADD UDPSESSION
UDPSESSION MOD
UDPSESSION
DSCP DSCP LTE LST UDPSESSION
UDPSESSION
BTS3900, BTS3900
REPORTCONTEN Response WCDMA, BTS3900
T Messages LTE None
ADD UDPSESSION
MOD
UDPSESSION BTS3900, BTS3900 UDPSESSION
INTERVAL Interval LTE LST UDPSESSION
UDPSESSION
ADD UDPSESSION
MOD
BTS3900, BTS3900 UDPSESSION
CHECKCOUNT Check Count LTE LST UDPSESSION
UDPSESSION
BTS3900, BTS3900
WCDMA, BTS3900
CHECKSTATUS Check Status LTE DSP UDPSESSION
UDT
ADD UDT
MOD UDT
User Data Type BTS3900, BTS3900 RMV UDT
UDTNO Number LTE LST UDT
UDT
User Data Type ADD UDT

Transfer Parameter BTS3900, BTS3900 MOD UDT
UDTPARAGRPID Group ID. LTE LST UDT
UDTPARAGRP
ADD
UDTPARAGRP
LST UDTPARAGRP
MOD
User Data Type UDTPARAGRP
Transfer Parameter BTS3900, BTS3900 RMV
UDTPARAGRPID Group ID. LTE UDTPARAGRP
UDTPARAGRP
ADD
UDTPARAGRP
MOD
BTS3900, BTS3900 UDTPARAGRP
PRIRULE Priority Rule LTE LST UDTPARAGRP
UDTPARAGRP
ADD
UDTPARAGRP
MOD
PRI Priority LTE LST UDTPARAGRP
ADD
UDTPARAGRP
UDTPARAGRP MOD
ACTFACTOR Act Factor LTE LST UDTPARAGRP
UDTPARAGRP
ADD
UDTPARAGRP
MOD
PRIMTRANRSCTY Primary Transport BTS3900, BTS3900 UDTPARAGRP
PE Resource Type LTE LST UDTPARAGRP
UDTPARAGRP
ADD
UDTPARAGRP
MOD
Primary Port Load BTS3900, BTS3900 UDTPARAGRP
PRIMPTLOADTH Threshold LTE LST UDTPARAGRP
UDTPARAGRP
ADD
Primary To UDTPARAGRP
Secondary Port MOD
PRIM2SECPTLOA Load Ratio BTS3900, BTS3900 UDTPARAGRP
DRATH Threshold LTE LST UDTPARAGRP
ADD
USERPLANEHOST
LST
USERPLANEHOST USERPLANEHOST
MOD
BTS3900, BTS3900 USERPLANEHOST
WCDMA, BTS3900 RMV
UPHOSTID User Plane Host ID LTE USERPLANEHOST
USERPLANEHOST
ADD
USERPLANEHOST
MOD
WCDMA, BTS3900 LST
VRFIDX VRF Index LTE USERPLANEHOST
ADD
USERPLANEHOST
USERPLANEHOST MOD
WCDMA, BTS3900 LST
IPVERSION IP Version LTE USERPLANEHOST
USERPLANEHOST
ADD
USERPLANEHOST
MOD
WCDMA, BTS3900 LST
LOCIPV4 Local IP Address LTE USERPLANEHOST
USERPLANEHOST
ADD
USERPLANEHOST
MOD
USERPLANEHOST
LOCIPV6 Local IPv6 Address LTE USERPLANEHOST
USERPLANEHOST
ADD
USERPLANEHOST
MOD
WCDMA, BTS3900 LST
IPSECSWITCH IPSec Switch LTE USERPLANEHOST
ADD
USERPLANEHOST
USERPLANEHOST MOD
WCDMA, BTS3900 LST
SECHOSTID Security Host ID LTE USERPLANEHOST
ADD
USERPLANEHOST
USERPLANEHOST MOD
WCDMA, BTS3900 LST
USERLABEL User Label LTE USERPLANEHOST
ADD
USERPLANEPEER
LST
USERPLANEPEER USERPLANEPEER
MOD
BTS3900, BTS3900 USERPLANEPEER
WCDMA, BTS3900 RMV
UPPEERID User Plane Peer ID LTE USERPLANEPEER
USERPLANEPEER
ADD
USERPLANEPEER
MOD
WCDMA, BTS3900 LST
VRFIDX VRF Index LTE USERPLANEPEER
ADD
USERPLANEPEER
USERPLANEPEER MOD
WCDMA, BTS3900 LST
IPVERSION IP Version LTE USERPLANEPEER
USERPLANEPEER
ADD
USERPLANEPEER
MOD
WCDMA, BTS3900 LST
PEERIPV4 Peer IP Address LTE USERPLANEPEER
USERPLANEPEER
ADD
USERPLANEPEER
MOD
USERPLANEPEER
PEERIPV6 Peer IPv6 Address LTE USERPLANEPEER
USERPLANEPEER
ADD
USERPLANEPEER
MOD
WCDMA, BTS3900 LST
IPSECSWITCH IPSec Switch LTE USERPLANEPEER
ADD
USERPLANEPEER
USERPLANEPEER MOD
WCDMA, BTS3900 LST
SECPEERID Security Peer ID LTE USERPLANEPEER
USERPLANEPEER
ADD
USERPLANEPEER
MOD
WCDMA, BTS3900 LST
REMOTEID Remote ID LTE USERPLANEPEER
USERPLANEPEER
ADD
USERPLANEPEER
MOD
WCDMA, BTS3900 LST
CTRLMODE Control Mode LTE USERPLANEPEER
USERPLANEPEER
BTS3900, BTS3900
WCDMA, BTS3900 LST
AUTOCFGFLAG Auto Config Flag LTE USERPLANEPEER
ADD
USERPLANEPEER
USERPLANEPEER MOD
WCDMA, BTS3900 LST
USERLABEL User Label LTE USERPLANEPEER
VLANCLASS
ADD VLANCLASS
BTS3900, BTS3900 LST VLANCLASS
WCDMA, BTS3900 MOD VLANCLASS
VLANGROUPNO VLAN Group No. LTE RMV VLANCLASS
VLANCLASS
ADD VLANCLASS
BTS3900, BTS3900 MOD VLANCLASS
WCDMA, BTS3900 RMV VLANCLASS
TRAFFIC Traffic Type LTE LST VLANCLASS
VLANCLASS ADD VLANCLASS

BTS3900, BTS3900 MOD VLANCLASS
User Data Service WCDMA, BTS3900 RMV VLANCLASS
SRVPRIO Priority LTE LST VLANCLASS
VLANCLASS BTS3900, BTS3900 ADD VLANCLASS

VLANID VLAN ID LTE LST VLANCLASS
VLANCLASS
BTS3900, BTS3900 ADD VLANCLASS
VLANPRIO VLAN Priority LTE LST VLANCLASS
VLANMAP ADD VLANMAP

BTS3900, BTS3900 MOD VLANMAP
WCDMA, BTS3900 RMV VLANMAP
VRFIDX VRF Index LTE LST VLANMAP
VLANMAP ADD VLANMAP
NEXTHOPIP Next Hop IP LTE LST VLANMAP
VLANMAP
ADD VLANMAP
MASK Mask LTE LST VLANMAP
VLANMAP
BTS3900, BTS3900 ADD VLANMAP

WCDMA, BTS3900 MOD VLANMAP
VLANMODE VLAN Mode LTE LST VLANMAP
VLANMAP BTS3900, BTS3900 ADD VLANMAP
VLANID VLAN ID LTE LST VLANMAP
VLANMAP

VLANPRIO VLAN Priority LTE LST VLANMAP
VLANMAP

VLANGROUPNO VLAN Group No. LTE LST VLANMAP
VLANMAP

SETPRIO Set VLAN Priority LTE LST VLANMAP
ADD VRF
VRF BTS3900, BTS3900 LST VRF
WCDMA, BTS3900 MOD VRF
VRFIDX VRF Index LTE RMV VRF
VRF BTS3900, BTS3900 ADD VRF

WCDMA, BTS3900 MOD VRF
USERLABEL User Label LTE LST VRF
ALD BTS3900, BTS3900 DLD ALDSW

WCDMA, BTS3900 DSP ALDVER
DEVICENO Device No. LTE RST ALD
ALD BTS3900, BTS3900

WCDMA, BTS3900
RtmVendorCode Actual Vendor Code LTE None

Actual Device Serial WCDMA, BTS3900
RtmDeviceSerialNo No. LTE DSP ALDVER
ALD
BTS3900, BTS3900
WCDMA, BTS3900
DEVICENAME Device Name LTE DSP ALDVER
DLD ALDSW
DLD RETCFGDATA
ALD BTS3900, BTS3900 DSP ALDVER
Control Port WCDMA, BTS3900 RST ALD
CTRLCN Cabinet No. LTE SCN ALD
ALD
DLD ALDSW
DLD RETCFGDATA
BTS3900, BTS3900 DSP ALDVER
Control Port WCDMA, BTS3900 RST ALD
CTRLSRN Subrack No. LTE SCN ALD
ALD
DLD ALDSW
DLD RETCFGDATA
BTS3900, BTS3900 DSP ALDVER
Control Port Slot WCDMA, BTS3900 RST ALD
CTRLSN No. LTE SCN ALD
ALD
BTS3900, BTS3900
WCDMA, BTS3900
ProtocolVersion Protocol Version LTE DSP ALDVER
BTS3900, BTS3900
ALD RtmTotalSubunitNu Actual Subunit WCDMA, BTS3900
m Number LTE None

WCDMA, BTS3900
VENDORCODE Vendor Code LTE None
ALD
BTS3900, BTS3900
WCDMA, BTS3900
SERIALNO Serial No. LTE None

WCDMA, BTS3900
HardwareVersion Hardware Version LTE DSP ALDVER

WCDMA, BTS3900
SoftwareVersion Software Version LTE DSP ALDVER
BTS3900, BTS3900
ALD WCDMA, BTS3900
DeviceModel Device Model LTE DSP ALDVER
WCDMA, BTS3900
DeviceType Device Type LTE DSP ALDVER
ALD
BTS3900, BTS3900
WCDMA, BTS3900
CtrlPortNo Control Port No. LTE None
DSP
ANTENNAPORT
ANTENNAPORT LST
BTS3900, BTS3900 ANTENNAPORT
WCDMA, BTS3900 MOD
CN Cabinet No. LTE ANTENNAPORT
ANTENNAPORT
DSP
ANTENNAPORT
LST
WCDMA, BTS3900 MOD
SRN Subrack No. LTE ANTENNAPORT
ANTENNAPORT
DSP
ANTENNAPORT
LST
WCDMA, BTS3900 MOD
SN Slot No. LTE ANTENNAPORT
ANTENNAPORT
DSP
ANTENNAPORT
LST
WCDMA, BTS3900 MOD
PN Antenna Port No. LTE ANTENNAPORT
MOD
ANTENNAPORT BTS3900, BTS3900 ANTENNAPORT
WCDMA, BTS3900 LST
FEEDERLENGTH Feeder Length LTE ANTENNAPORT
ANTENNAPORT
MOD
WCDMA, BTS3900 LST
DLDELAY DL Time Delay LTE ANTENNAPORT
ANTENNAPORT
MOD
WCDMA, BTS3900 LST
ULDELAY UL Time Delay LTE ANTENNAPORT
ANTENNAPORT
MOD
WCDMA, BTS3900 LST
PWRSWITCH ALD Power Switch LTE ANTENNAPORT
ANTENNAPORT
MOD
Current Alarm WCDMA, BTS3900 LST
THRESHOLDTYPE Threshold Type LTE ANTENNAPORT
ANTENNAPORT
MOD
Undercurrent Alarm WCDMA, BTS3900 LST
UOTHD Occur Threshold LTE ANTENNAPORT
ANTENNAPORT
MOD
Undercurrent Alarm WCDMA, BTS3900 LST
UCTHD Clear Threshold LTE ANTENNAPORT
ANTENNAPORT
MOD
Overcurrent Alarm WCDMA, BTS3900 LST
OOTHD Occur Threshold LTE ANTENNAPORT
ANTENNAPORT
MOD
Overcurrent Alarm WCDMA, BTS3900 LST
OCTHD Clear Threshold LTE ANTENNAPORT
BTS3900, BTS3900
ANTENNAPORT WCDMA, BTS3900 DSP
ALDCurrValue ALD Current Value LTE ANTENNAPORT
ANTENNAPORT BTS3900, BTS3900

ALD Actual Power WCDMA, BTS3900 DSP
ALDRtmPwrSwitch Switch LTE ANTENNAPORT
ADD RET
RET BTS3900, BTS3900 MOD RET
WCDMA, BTS3900 MOD RETTILT
RETTYPE RET Type LTE LST RET
RET
BTS3900, BTS3900 ADD RET
WCDMA, BTS3900 MOD RET
POLARTYPE Polar Type LTE LST RET
RET

SCENARIO Antenna Scenario LTE LST RET
RET BTS3900, BTS3900 ADD RET

RET Subunit WCDMA, BTS3900 MOD RET
SUBUNITNUM Number LTE LST RET
ADD RET
DLD ALDSW
DSP ALDVER
RET DSP RET
LST RET
BTS3900, BTS3900 MOD RET
WCDMA, BTS3900 RMV RET
RET BTS3900, BTS3900

WCDMA, BTS3900
RtmVendorCode Actual Vendor Code LTE DSP RET

Actual Device Serial WCDMA, BTS3900 DSP ALDVER
RtmDeviceSerialNo No. LTE DSP RET
RET
ADD RET
BTS3900, BTS3900 MOD RET
DEVICENAME Device Name LTE LST RET
RET
ADD RET
DLD ALDSW
DLD RETCFGDATA
DSP ALDVER
MOD RET
RST ALD
BTS3900, BTS3900 SCN ALD
Control Port WCDMA, BTS3900 DSP RET
CTRLCN Cabinet No. LTE LST RET
RET
ADD RET
DLD ALDSW
DLD RETCFGDATA
DSP ALDVER
MOD RET
RST ALD
Control Port WCDMA, BTS3900 DSP RET
CTRLSRN Subrack No. LTE LST RET
RET
ADD RET
DLD ALDSW
DLD RETCFGDATA
DSP ALDVER
MOD RET
RST ALD
Control Port Slot WCDMA, BTS3900 DSP RET
CTRLSN No. LTE LST RET
RET
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
RET RtmTotalSubunitNu Actual Subunit WCDMA, BTS3900
m Number LTE DSP RET
RET

VENDORCODE Vendor Code LTE LST RET
RET

SERIALNO Serial No. LTE LST RET

WCDMA, BTS3900

WCDMA, BTS3900
BTS3900, BTS3900
RET WCDMA, BTS3900

WCDMA, BTS3900
RET
BTS3900, BTS3900
WCDMA, BTS3900
CtrlPortNo Control Port No. LTE DSP RET
DSP
RETDEVICEDATA
RETDEVICEDATA LST
BTS3900, BTS3900 RETDEVICEDATA
WCDMA, BTS3900 MOD
DEVICENO Device No. LTE RETDEVICEDATA
DSP
RETDEVICEDATA
RETDEVICEDATA LST
WCDMA, BTS3900 MOD
SUBUNITNO Subunit No. LTE RETDEVICEDATA
MOD
RETDEVICEDATA
RETDEVICEDATA DSP
WCDMA, BTS3900 LST
BEARING Antenna Bearing LTE RETDEVICEDATA
MOD
RETDEVICEDATA
RETDEVICEDATA DSP
Antenna Model WCDMA, BTS3900 LST
MODELNO Number LTE RETDEVICEDATA
RETDEVICEDATA
MOD
RETDEVICEDATA
DSP
WCDMA, BTS3900 LST
BSID Base Station ID LTE RETDEVICEDATA
RETDEVICEDATA
MOD
WCDMA, BTS3900 LST
BEAMWIDTH1 Beamwidth1 LTE RETDEVICEDATA
RETDEVICEDATA
MOD
WCDMA, BTS3900 LST
RETDEVICEDATA
MOD
WCDMA, BTS3900 LST
RETDEVICEDATA
MOD
WCDMA, BTS3900 LST
MOD
RETDEVICEDATA BTS3900, BTS3900 RETDEVICEDATA
WCDMA, BTS3900 LST
GAIN1 Gain1 LTE RETDEVICEDATA
MOD
WCDMA, BTS3900 LST
MOD
WCDMA, BTS3900 LST
MOD
WCDMA, BTS3900 LST
MOD
RETDEVICEDATA
RETDEVICEDATA DSP
WCDMA, BTS3900 LST
DATE Installation Date LTE RETDEVICEDATA
MOD
RETDEVICEDATA
RETDEVICEDATA DSP
Installed WCDMA, BTS3900 LST
TILT Mechanical Tilt LTE RETDEVICEDATA
MOD
RETDEVICEDATA
RETDEVICEDATA DSP
WCDMA, BTS3900 LST
INSTALLERID Installer's ID LTE RETDEVICEDATA
RETDEVICEDATA
MOD
WCDMA, BTS3900 LST
BAND1 Band1 LTE RETDEVICEDATA
RETDEVICEDATA
MOD
WCDMA, BTS3900 LST
RETDEVICEDATA
MOD
WCDMA, BTS3900 LST
RETDEVICEDATA
MOD
WCDMA, BTS3900 LST
RETDEVICEDATA
MOD
RETDEVICEDATA
DSP
WCDMA, BTS3900 LST
SECTORID Sector ID LTE RETDEVICEDATA
MOD
RETDEVICEDATA
RETDEVICEDATA DSP
WCDMA, BTS3900 LST
SERIALNO Antenna Serial No. LTE RETDEVICEDATA
RETDEVICEDATA BTS3900, BTS3900

WCDMA, BTS3900 DSP
MaxTilt Max Tilt LTE RETDEVICEDATA
RETDEVICEDATA BTS3900, BTS3900
WCDMA, BTS3900 DSP
MinTilt Min Tilt LTE RETDEVICEDATA
RETDEVICEDATA
BTS3900, BTS3900
RtmOpBandCodes WCDMA, BTS3900 DSP
1 Band1 LTE RETDEVICEDATA
RETDEVICEDATA
BTS3900, BTS3900
RETDEVICEDATA
BTS3900, BTS3900
RETDEVICEDATA
BTS3900, BTS3900
RETDEVICEDATA
BTS3900, BTS3900
WCDMA, BTS3900 DSP
RtmBeamWidth1 Beamwidth1 LTE RETDEVICEDATA
RETDEVICEDATA
BTS3900, BTS3900
WCDMA, BTS3900 DSP
RETDEVICEDATA
BTS3900, BTS3900
WCDMA, BTS3900 DSP
RETDEVICEDATA
BTS3900, BTS3900
WCDMA, BTS3900 DSP
BTS3900, BTS3900
RETDEVICEDATA WCDMA, BTS3900 DSP
RtmGainValue1 Gain1 LTE RETDEVICEDATA
BTS3900, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
RETPORT BTS3900, BTS3900 DSP RETPORT

WCDMA, BTS3900 LST RETPORT
CN Cabinet No. LTE MOD RETPORT
SRN Subrack No. LTE MOD RETPORT

SN Slot No. LTE MOD RETPORT

PN Port No. LTE MOD RETPORT
RETPORT
BTS3900, BTS3900
WCDMA, BTS3900 MOD RETPORT
PWRSWITCH ALD Power Switch LTE LST RETPORT
RETPORT
BTS3900, BTS3900
Current Alarm WCDMA, BTS3900 MOD RETPORT
THRESHOLDTYPE Threshold Type LTE LST RETPORT
RETPORT
BTS3900, BTS3900
Undercurrent Alarm WCDMA, BTS3900 MOD RETPORT
UOTHD Occur Threshold LTE LST RETPORT
RETPORT
BTS3900, BTS3900
Undercurrent Alarm WCDMA, BTS3900 MOD RETPORT
UCTHD Clear Threshold LTE LST RETPORT
RETPORT
BTS3900, BTS3900
Overcurrent Alarm WCDMA, BTS3900 MOD RETPORT
OOTHD Occur Threshold LTE LST RETPORT
RETPORT
BTS3900, BTS3900
Overcurrent Alarm WCDMA, BTS3900 MOD RETPORT
OCTHD Clear Threshold LTE LST RETPORT
BTS3900, BTS3900
RETPORT WCDMA, BTS3900
ALDCurrValue ALD Current Value LTE DSP RETPORT
RETPORT BTS3900, BTS3900

ALD Actual Power WCDMA, BTS3900
ALDRtmPwrSwitch Switch LTE DSP RETPORT
CLB RET
DLD RETCFGDATA
DSP RETSUBUNIT
RETSUBUNIT LST RETSUBUNIT
WCDMA, BTS3900 RETSUBUNIT
DEVICENO Device No. LTE MOD RETTILT
CLB RET
DLD RETCFGDATA
DSP RETSUBUNIT
RETSUBUNIT BTS3900, BTS3900 LST RETSUBUNIT
WCDMA, BTS3900 MOD
SUBUNITNO Subunit No. LTE RETSUBUNIT
RETSUBUNIT
BTS3900, BTS3900
WCDMA, BTS3900
Status Online Status LTE DSP RETSUBUNIT
BTS3900, BTS3900
RETSUBUNIT WCDMA, BTS3900
RtmTilt Actual Tilt LTE DSP RETSUBUNIT
BTS3900, BTS3900
RETSUBUNIT WCDMA, BTS3900
RtmSectorId Sector Id LTE DSP RETSUBUNIT
RETSUBUNIT

Connect Port 1 WCDMA, BTS3900 RETSUBUNIT
CONNCN1 Cabinet No. LTE LST RETSUBUNIT
RETSUBUNIT

CONNSRN1 Subrack No. LTE LST RETSUBUNIT
RETSUBUNIT

Connect Port 1 Slot WCDMA, BTS3900 RETSUBUNIT
CONNSN1 No. LTE LST RETSUBUNIT
RETSUBUNIT

Connect Port 1 Port WCDMA, BTS3900 RETSUBUNIT
CONNPN1 No. LTE LST RETSUBUNIT
RETSUBUNIT

CONNCN2 Cabinet No. LTE LST RETSUBUNIT
RETSUBUNIT

CONNSRN2 Subrack No. LTE LST RETSUBUNIT
RETSUBUNIT

Connect Port 2 Slot WCDMA, BTS3900 RETSUBUNIT
CONNSN2 No. LTE LST RETSUBUNIT
RETSUBUNIT

Connect Port 2 Port WCDMA, BTS3900 RETSUBUNIT
CONNPN2 No. LTE LST RETSUBUNIT
RETSUBUNIT
MOD
BTS3900, BTS3900 RETSUBUNIT
TILT Tilt LTE LST RETSUBUNIT
RETSUBUNIT

Tilt Alarm Error WCDMA, BTS3900 RETSUBUNIT
AER Range LTE LST RETSUBUNIT
RETSUBUNIT
MOD
BTS3900, BTS3900 RETSUBUNIT
SUBNAME Subunit Name LTE LST RETSUBUNIT
TMA BTS3900, BTS3900 ADD TMA

TMA Subunit WCDMA, BTS3900 MOD TMA
SUBUNITNUM Number LTE LST TMA
ADD TMA
DLD ALDSW
DSP ALDVER
TMA DSP TMA
LST TMA
BTS3900, BTS3900 MOD TMA
WCDMA, BTS3900 RMV TMA
TMA BTS3900, BTS3900

WCDMA, BTS3900
RtmVendorCode Actual Vendor Code LTE DSP TMA

Actual Device Serial WCDMA, BTS3900 DSP ALDVER
RtmDeviceSerialNo No. LTE DSP TMA
TMA
ADD TMA
BTS3900, BTS3900 MOD TMA
DEVICENAME Device Name LTE LST TMA
ADD TMA
DLD ALDSW
DLD RETCFGDATA
DSP ALDVER
TMA MOD TMA
RST ALD
Control Port WCDMA, BTS3900 DSP TMA
CTRLCN Cabinet No. LTE LST TMA
ADD TMA
DLD ALDSW
DLD RETCFGDATA
TMA DSP ALDVER
MOD TMA
RST ALD
Control Port WCDMA, BTS3900 DSP TMA
CTRLSRN Subrack No. LTE LST TMA
TMA
ADD TMA
DLD ALDSW
DLD RETCFGDATA
DSP ALDVER
MOD TMA
RST ALD
Control Port Slot WCDMA, BTS3900 DSP TMA
CTRLSN No. LTE LST TMA
TMA
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
TMA RtmTotalSubunitNu Actual Subunit WCDMA, BTS3900
m Number LTE DSP TMA
TMA
BTS3900, BTS3900 ADD TMA

WCDMA, BTS3900 MOD TMA
VENDORCODE Vendor Code LTE LST TMA
TMA
BTS3900, BTS3900 ADD TMA

WCDMA, BTS3900 MOD TMA
SERIALNO Serial No. LTE LST TMA

WCDMA, BTS3900

WCDMA, BTS3900
BTS3900, BTS3900
TMA WCDMA, BTS3900

WCDMA, BTS3900
TMA
BTS3900, BTS3900
WCDMA, BTS3900
CtrlPortNo Control Port No. LTE DSP TMA
DSP
TMADEVICEDATA
TMADEVICEDATA LST
BTS3900, BTS3900 TMADEVICEDATA
WCDMA, BTS3900 MOD
DEVICENO Device No. LTE TMADEVICEDATA
DSP
TMADEVICEDATA
TMADEVICEDATA LST
WCDMA, BTS3900 MOD
SUBUNITNO Subunit No. LTE TMADEVICEDATA
MOD
TMADEVICEDATA
TMADEVICEDATA DSP
WCDMA, BTS3900 LST
BEARING Antenna Bearing LTE TMADEVICEDATA
TMADEVICEDATA
MOD
TMADEVICEDATA
DSP
WCDMA, BTS3900 LST
BSID Base Station ID LTE TMADEVICEDATA
TMADEVICEDATA
MOD
WCDMA, BTS3900 LST
BEAMWIDTH1 Beamwidth1 LTE TMADEVICEDATA
TMADEVICEDATA
MOD
WCDMA, BTS3900 LST
TMADEVICEDATA
MOD
WCDMA, BTS3900 LST
TMADEVICEDATA
MOD
WCDMA, BTS3900 LST
MOD
TMADEVICEDATA BTS3900, BTS3900 TMADEVICEDATA
WCDMA, BTS3900 LST
GAIN1 Gain1 LTE TMADEVICEDATA
MOD
WCDMA, BTS3900 LST
MOD
WCDMA, BTS3900 LST
MOD
WCDMA, BTS3900 LST
MOD
TMADEVICEDATA
TMADEVICEDATA DSP
WCDMA, BTS3900 LST
DATE Installation Date LTE TMADEVICEDATA
MOD
TMADEVICEDATA
TMADEVICEDATA DSP
Installed WCDMA, BTS3900 LST
TILT Mechanical Tilt LTE TMADEVICEDATA
MOD
TMADEVICEDATA
TMADEVICEDATA DSP
WCDMA, BTS3900 LST
INSTALLERID Installer's ID LTE TMADEVICEDATA
TMADEVICEDATA
MOD
WCDMA, BTS3900 LST
BAND1 Band1 LTE TMADEVICEDATA
TMADEVICEDATA
MOD
WCDMA, BTS3900 LST
TMADEVICEDATA
MOD
WCDMA, BTS3900 LST
TMADEVICEDATA
MOD
WCDMA, BTS3900 LST
TMADEVICEDATA
MOD
TMADEVICEDATA
DSP
WCDMA, BTS3900 LST
SECTORID Sector ID LTE TMADEVICEDATA
MOD
TMADEVICEDATA
TMADEVICEDATA DSP
WCDMA, BTS3900 LST
SERIALNO Serial No. LTE TMADEVICEDATA
MOD
TMADEVICEDATA
TMADEVICEDATA DSP
Connect Antenna WCDMA, BTS3900 LST
MODELNO Model Number LTE TMADEVICEDATA
TMADEVICEDATA BTS3900, BTS3900

Max Supported WCDMA, BTS3900 DSP
MaxSupportedGain Gain LTE TMADEVICEDATA
TMADEVICEDATA BTS3900, BTS3900
WCDMA, BTS3900 DSP
MinSupportedGain Min Supported Gain LTE TMADEVICEDATA
TMADEVICEDATA
BTS3900, BTS3900
RtmTmaSubunitTyp WCDMA, BTS3900 DSP
e Real Subunit Type LTE TMADEVICEDATA
BTS3900, BTS3900
TMADEVICEDATA RtmTmaGainResol Real Gain WCDMA, BTS3900 DSP
ution Resolution LTE TMADEVICEDATA
TMADEVICEDATA
BTS3900, BTS3900
WCDMA, BTS3900 DSP
RtmOpBandCode1 Band1 LTE TMADEVICEDATA
TMADEVICEDATA
BTS3900, BTS3900
WCDMA, BTS3900 DSP
TMADEVICEDATA
BTS3900, BTS3900
WCDMA, BTS3900 DSP
TMADEVICEDATA
BTS3900, BTS3900
WCDMA, BTS3900 DSP
TMADEVICEDATA
BTS3900, BTS3900
WCDMA, BTS3900 DSP
RtmBeamWidth1 Beamwidth1 LTE TMADEVICEDATA
TMADEVICEDATA
BTS3900, BTS3900
WCDMA, BTS3900 DSP
TMADEVICEDATA
BTS3900, BTS3900
WCDMA, BTS3900 DSP
TMADEVICEDATA
BTS3900, BTS3900
WCDMA, BTS3900 DSP
BTS3900, BTS3900
TMADEVICEDATA WCDMA, BTS3900 DSP
RtmGainValue1 Gain1 LTE TMADEVICEDATA
BTS3900, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
TMADEVICEDATA
BTS3900, BTS3900
RtmTmaRxMinFreB Real Received Min WCDMA, BTS3900 DSP
and Frequency Band LTE TMADEVICEDATA
TMADEVICEDATA
BTS3900, BTS3900
RtmTmaTxMaxFre Real Transmit Max WCDMA, BTS3900 DSP
Band Frequency Band LTE TMADEVICEDATA
TMADEVICEDATA
BTS3900, BTS3900
RtmTmaTxMinFreB Real Transmit Min WCDMA, BTS3900 DSP
and Frequency Band LTE TMADEVICEDATA
TMADEVICEDATA
BTS3900, BTS3900
RtmTmaRxMaxFre Real Received Max WCDMA, BTS3900 DSP
Band Frequency Band LTE TMADEVICEDATA
DSP TMASUBUNIT
BTS3900, BTS3900 LST TMASUBUNIT
TMASUBUNIT WCDMA, BTS3900 MOD
DEVICENO Device No. LTE TMASUBUNIT
DSP TMASUBUNIT
TMASUBUNIT BTS3900, BTS3900 LST TMASUBUNIT
WCDMA, BTS3900 MOD
SUBUNITNO Subunit No. LTE TMASUBUNIT
BTS3900, BTS3900
TMASUBUNIT WCDMA, BTS3900
RtmSectorId Actual Sector ID LTE DSP TMASUBUNIT
BTS3900, BTS3900
TMASUBUNIT WCDMA, BTS3900
RtmGain Actual Gain LTE DSP TMASUBUNIT
TMASUBUNIT BTS3900, BTS3900

WCDMA, BTS3900
RtmMode Actual Work Mode LTE DSP TMASUBUNIT
TMASUBUNIT
BTS3900, BTS3900
WCDMA, BTS3900
Status Online Status LTE DSP TMASUBUNIT
TMASUBUNIT

WCDMA, BTS3900 TMASUBUNIT
CONNPN Connect Port No. LTE LST TMASUBUNIT
TMASUBUNIT

Connect Port WCDMA, BTS3900 TMASUBUNIT
CONNCN Cabinet No. LTE LST TMASUBUNIT
TMASUBUNIT

Connect Port Slot WCDMA, BTS3900 TMASUBUNIT
CONNSN No. LTE LST TMASUBUNIT
TMASUBUNIT

Connect Port WCDMA, BTS3900 TMASUBUNIT
CONNSRN Subrack No. LTE LST TMASUBUNIT
TMASUBUNIT

GAIN Gain LTE LST TMASUBUNIT
TMASUBUNIT

MODE Work Mode LTE LST TMASUBUNIT
VANTENNAPORT BTS3900, BTS3900

WCDMA, BTS3900
CONNCN Cabinet No. LTE None

WCDMA, BTS3900
CONNSRN Subrack No. LTE None

WCDMA, BTS3900
CONNSN Slot No. LTE None
VANTENNAPORT
BTS3900, BTS3900
WCDMA, BTS3900
PN Port No. LTE None
VRET
BTS3900, BTS3900
WCDMA, BTS3900 LST VRET
DEVICENO Device No. LTE MOD VRET
VRET BTS3900, BTS3900

WCDMA, BTS3900
CONNCN Cabinet No. LTE LST VRET

WCDMA, BTS3900
CONNSRN Subrack No. LTE LST VRET

WCDMA, BTS3900
CONNSN Slot No. LTE LST VRET
VRET
BTS3900, BTS3900
WCDMA, BTS3900 MOD VRET
DEVICENAME Device Name LTE LST VRET

SUBUNITQUANTIT WCDMA, BTS3900 MOD VRET
Y Subunit Quantity LTE LST VRET
VRETSUBUNIT BTS3900, BTS3900

WCDMA, BTS3900
CONNCN Cabinet No. LTE None
VRETSUBUNIT
MOD
VRETSUBUNIT
DSP
BTS3900, BTS3900 VRETSUBUNIT
WCDMA, BTS3900 LST
CONNPN1 Connected Port 1 LTE VRETSUBUNIT
VRETSUBUNIT
MOD
VRETSUBUNIT
DSP
WCDMA, BTS3900 LST
VRETSUBUNIT
MOD
WCDMA, BTS3900 LST
SUBNAME Subunit Name LTE VRETSUBUNIT
DSP
VRETSUBUNIT VRETSUBUNIT
LST
WCDMA, BTS3900 MOD
DEVICENO Device No. LTE VRETSUBUNIT
VRETSUBUNIT
MOD
VRETSUBUNIT
DSP
WCDMA, BTS3900 LST
POLARTYPE1 Polar Type1 LTE VRETSUBUNIT

WCDMA, BTS3900
CONNSN Slot No. LTE None

WCDMA, BTS3900
CONNSRN Subrack No. LTE None
DSP
VRETSUBUNIT
LST
VRETSUBUNIT BTS3900, BTS3900 VRETSUBUNIT
WCDMA, BTS3900 MOD
SUBUNITNO Subunit No. LTE VRETSUBUNIT
VRETSUBUNIT
MOD
VRETSUBUNIT
DSP
WCDMA, BTS3900 LST
VRETSUBUNIT
MOD
VRETSUBUNIT
DSP
WCDMA, BTS3900 LST
VRETSUBUNIT
MOD RETTILT
MOD
VRETSUBUNIT
DSP
WCDMA, BTS3900 LST
DLTILT Downlink Tilt LTE VRETSUBUNIT
VRETSUBUNIT
MOD RETTILT
MOD
VRETSUBUNIT
DSP
WCDMA, BTS3900 LST
ULTILT Uplink Tilt LTE VRETSUBUNIT
VRETSUBUNIT
MOD
VRETSUBUNIT
DSP
WCDMA, BTS3900 LST
VRETSUBUNIT
MOD
VRETSUBUNIT
DSP
WCDMA, BTS3900 LST
VRETSUBUNIT
MOD
VRETSUBUNIT
DSP
WCDMA, BTS3900 LST

WCDMA, BTS3900 MOD
PORTNUM PORTNUM LTE VRETSUBUNIT
VRETSUBUNIT
MOD
VRETSUBUNIT
DSP
WCDMA, BTS3900 LST
BEAMAZIMUTH BeamAzimuth LTE VRETSUBUNIT
VRETSUBUNIT
MOD
VRETSUBUNIT
DSP
WCDMA, BTS3900 LST
BEAMWIDTH BeamWidth LTE VRETSUBUNIT
ADD CTRLLNK
CTRLLNK BTS3900, BTS3900 LST CTRLLNK
WCDMA, BTS3900 MOD CTRLLNK
LN Local Link No. LTE RMV CTRLLNK
ADD CTRLLNK
CTRLLNK BTS3900, BTS3900 DSP
WCDMA, BTS3900 CTRLLNKSTAT
CN Local Cabinet No. LTE LST CTRLLNK
ADD CTRLLNK
CTRLLNK BTS3900, BTS3900 DSP
WCDMA, BTS3900 CTRLLNKSTAT
SRN Local Subrack No. LTE LST CTRLLNK
ADD CTRLLNK
DSP
CTRLLNK BTS3900, BTS3900 CTRLLNKSTAT
SN Local Slot No. LTE LST CTRLLNK
CTRLLNK BTS3900, BTS3900

WCDMA, BTS3900 ADD CTRLLNK
UPCN Upper Cabinet No. LTE LST CTRLLNK
CTRLLNK BTS3900, BTS3900

WCDMA, BTS3900 ADD CTRLLNK
UPSRN Upper Subrack No. LTE LST CTRLLNK
CTRLLNK BTS3900, BTS3900 ADD CTRLLNK

UPSN Upper Slot No. LTE LST CTRLLNK
CTRLLNK
BTS3900, BTS3900 ADD CTRLLNK

UPPT Upper Port No. LTE LST CTRLLNK
CHK
BTS3900, BTS3900
WCDMA, BTS3900 SET CFGCHK
ENABLEFLAG Enable Flag LTE LST CFGCHK
ADD BITS
DSP BITS
BITS BTS3900, BTS3900 MOD BITS
WCDMA, BTS3900 RMV BITS
BN BITS Clock No. LTE LST BITS
BITS BTS3900, BTS3900
WCDMA, BTS3900 ADD BITS
CN Cabinet No. LTE LST BITS

SRN Subrack No. LTE LST BITS

SN Slot No. LTE LST BITS
BITS
BTS3900, BTS3900
WCDMA, BTS3900
ActiveState Link Active State LTE DSP BITS
BITS
BTS3900, BTS3900
WCDMA, BTS3900
AvailableState Link Available State LTE DSP BITS
BITS
BTS3900, BTS3900 ADD BITS

WCDMA, BTS3900 MOD BITS
PRI Priority LTE LST BITS
ADD LINECLK
DSP LINECLK
LINECLK BTS3900, BTS3900 MOD LINECLK
WCDMA, BTS3900 RMV LINECLK
LN Line Clock No. LTE LST LINECLK
LINECLK BTS3900, BTS3900
WCDMA, BTS3900 ADD LINECLK
CN Cabinet No. LTE LST LINECLK

SRN Subrack No. LTE LST LINECLK

SN Slot No. LTE LST LINECLK
LINECLK
BTS3900, BTS3900 ADD LINECLK
WCDMA, BTS3900 DSP LINECLK
PT Port Type LTE LST LINECLK
LINECLK
WCDMA, BTS3900 DSP LINECLK
PN Port No. LTE LST LINECLK
LINECLK
BTS3900, BTS3900
WCDMA, BTS3900
ActiveState Link Active State LTE DSP LINECLK
LINECLK
BTS3900, BTS3900
WCDMA, BTS3900
AvailableState Link Available State LTE DSP LINECLK
LINECLK

WCDMA, BTS3900 MOD LINECLK
PRI Priority LTE LST LINECLK
ADD PEERCLK
PEERCLK BTS3900, BTS3900 DSP PEERCLK
WCDMA, BTS3900 RMV PEERCLK
PN Peer Clock No. LTE LST PEERCLK
PEERCLK
BTS3900, BTS3900
WCDMA, BTS3900 ADD PEERCLK
PS Peer Standard LTE LST PEERCLK
PEERCLK
BTS3900, BTS3900
WCDMA, BTS3900
ActiveState Link Active State LTE DSP PEERCLK
PEERCLK
BTS3900, BTS3900
WCDMA, BTS3900
AvailableState Link Available State LTE DSP PEERCLK
TOD
ADD TOD
DSP TOD
BTS3900, BTS3900 MOD TOD
WCDMA, BTS3900 RMV TOD
TN TOD Clock No. LTE LST TOD
TOD
BTS3900, BTS3900 ADD TOD

WCDMA, BTS3900 DSP TOD
TYPE TOD Type LTE LST TOD
TOD BTS3900, BTS3900

WCDMA, BTS3900 ADD TOD
CN Cabinet No. LTE LST TOD
TOD BTS3900, BTS3900

SRN Subrack No. LTE LST TOD
TOD
BTS3900, BTS3900
SN Slot No. LTE LST TOD
TOD BTS3900, BTS3900 ADD TOD

WCDMA, BTS3900 MOD TOD
CABLETYPE Cable Type LTE LST TOD
TOD

CABLE_LEN Cable Length LTE LST TOD
TOD
BTS3900, BTS3900
WCDMA, BTS3900
ActiveState Link Active State LTE DSP TOD
TOD
BTS3900, BTS3900
WCDMA, BTS3900
AvailableState Link Available State LTE DSP TOD
BTS3900, BTS3900
TOD WCDMA, BTS3900
DELAY Delay LTE DSP TOD
TOD

PRI Priority LTE LST TOD
ADD GPS
DSP GPS
GPS MOD GPS
BTS3900, BTS3900 RMV GPS
WCDMA, BTS3900 RST SATCARD
GN GPS Clock No. LTE LST GPS
GPS BTS3900, BTS3900

WCDMA, BTS3900 ADD GPS
CN Cabinet No. LTE LST GPS

SRN Subrack No. LTE LST GPS

SN Slot No. LTE LST GPS
GPS
BTS3900, BTS3900
WCDMA, BTS3900 MOD GPSPOS
WPOS Way to Get Position LTE LST GPSPOS
GPS
BTS3900, BTS3900 MOD GPSPOS

WCDMA, BTS3900 DSP GPS
LONG Antenna Longitude LTE LST GPSPOS
GPS

LAT Antenna Latitude LTE LST GPSPOS
GPS

ALT Antenna Altitude LTE LST GPSPOS
GPS

AGL Antenna Angle LTE LST GPSPOS
BTS3900, BTS3900
GPS WCDMA, BTS3900
DELAY Feeder Delay LTE DSP GPS

DURATION Duration LTE LST GPSPOS
PRECISION Precision LTE LST GPSPOS
GPS
BTS3900, BTS3900 ADD GPS

WCDMA, BTS3900 MOD GPS
CABLETYPE Cable Type LTE LST GPS
GPS

CABLE_LEN Cable Length LTE LST GPS
GPS
BTS3900, BTS3900
WCDMA, BTS3900
GpsVersion GPS Version LTE DSP GPS

WCDMA, BTS3900
PosFix GPS Position Fixed LTE DSP GPS
WCDMA, BTS3900
Almnac Almanac Validity LTE DSP GPS

WCDMA, BTS3900
PosSolu Position Solution LTE DSP GPS

WCDMA, BTS3900
FixPos Fixed Position LTE DSP GPS

WCDMA, BTS3900
ClkSteer Clock Steering LTE DSP GPS

WCDMA, BTS3900
ClkMode Clock Model Validity LTE DSP GPS

GLONASS WCDMA, BTS3900
GlonassNum Satellites Traced LTE DSP GPS
GPS
BTS3900, BTS3900
WCDMA, BTS3900
GpsCardState GPS Card State LTE DSP GPS
GPS
BTS3900, BTS3900
WCDMA, BTS3900
GpsCardType GPS Card Type LTE DSP GPS
BTS3900, BTS3900
GPS GPS Satellites WCDMA, BTS3900
GpsNum Traced LTE DSP GPS
GPS
ADD GPS
BTS3900, BTS3900 MOD GPS
MODE GPS Work Mode LTE LST GPS

COMPASS WCDMA, BTS3900
CompassNum Satellites Traced LTE DSP GPS
GPS
BTS3900, BTS3900
WCDMA, BTS3900
ActiveState Link Active State LTE DSP GPS
GPS

PRI Priority LTE LST GPS

WCDMA, BTS3900
HoldStatus Hold Status LTE DSP GPS
ADD IPCLKLINK
DSP IPCLKLINK
DSP PRICLASS
RMV IPCLKLINK
IPCLKLNK
SET
CLASSIDENTIFY
BTS3900, BTS3900 SET PRICLASS
WCDMA, BTS3900 LST IPCLKLINK
LN Link No. LTE LST PRICLASS
IPCLKLNK
BTS3900, BTS3900
WCDMA, BTS3900 ADD IPCLKLINK
ICPT Protocol Type LTE LST IPCLKLINK
IPCLKLNK
BTS3900, BTS3900
CN Cabinet No. LTE LST IPCLKLINK
IPCLKLNK
BTS3900, BTS3900
SRN Subrack No. LTE LST IPCLKLINK
IPCLKLNK
BTS3900, BTS3900
SN Slot No. LTE LST IPCLKLINK
IPCLKLNK
BTS3900, BTS3900 ADD IPCLKLINK

WCDMA, BTS3900 DSP IPCLKLINK
CIP Client IPv4 LTE LST IPCLKLINK
IPCLKLNK
BTS3900, BTS3900
SIP Server IPv4 LTE LST IPCLKLINK
IPCLKLNK
BTS3900, BTS3900
DM Domain LTE LST IPCLKLINK
IPCLKLNK
BTS3900, BTS3900
DELAYTYPE Delay Type LTE LST IPCLKLINK
IPCLKLNK

Priority Clock Class WCDMA, BTS3900 CLASSIDENTIFY
CLASSIDENTIFY Identify Flag LTE DSP PRICLASS
IPCLKLNK

Priority Clock WCDMA, BTS3900 DSP PRICLASS
CLASS0 Class0 LTE LST PRICLASS
IPCLKLNK

IPCLKLNK

IPCLKLNK

IPCLKLNK BTS3900, BTS3900

Current Priority WCDMA, BTS3900
CurClass Clock Class LTE DSP PRICLASS
IPCLKLNK
BTS3900, BTS3900
Clock Source WCDMA, BTS3900 ADD IPCLKLINK
MACMODE Specified or Not LTE LST IPCLKLINK
IPCLKLNK

Clock Source MAC WCDMA, BTS3900 DSP IPCLKLINK
CLKMAC Address LTE LST IPCLKLINK
IPCLKLNK
BTS3900, BTS3900
WCDMA, BTS3900
ActiveState Link Active State LTE DSP IPCLKLINK
IPCLKLNK
BTS3900, BTS3900
WCDMA, BTS3900
AvailableState Link Available State LTE DSP IPCLKLINK
IPCLKLNK
BTS3900, BTS3900
CNM Clock Net Mode LTE LST IPCLKLINK
IPCLKLNK
BTS3900, BTS3900
CMPST Compensation LTE LST IPCLKLINK
IPCLKLNK
BTS3900, BTS3900
DisorderPacketsNu Number of Disorder WCDMA, BTS3900
m Packets LTE DSP IPCLKLINK
IPCLKLNK
BTS3900, BTS3900
Number of Dropped WCDMA, BTS3900
DropPacketsNum Packets LTE DSP IPCLKLINK
IPCLKLNK
BTS3900, BTS3900
ReceivePacketsNu Number of WCDMA, BTS3900
m Received Packets LTE DSP IPCLKLINK
IPCLKLNK BTS3900, BTS3900

WCDMA, BTS3900
StepMode Step Mode LTE DSP IPCLKLINK
BTS3900, BTS3900
IPCLKLNK WCDMA, BTS3900
VlanId VLAN ID LTE DSP IPCLKLINK
IPCLKLNK
BTS3900, BTS3900
PRI Priority LTE LST IPCLKLINK
IPCLKLNK
BTS3900, BTS3900
ANNFREQ Announce Freq LTE LST IPCLKLINK
IPCLKLNK
BTS3900, BTS3900
SYNCFREQ Sync Freq LTE LST IPCLKLINK
IPCLKLNK
BTS3900, BTS3900
MASTERPRIO Master Priority LTE LST IPCLKLINK
IPCLKLNK
BTS3900, BTS3900
PROFILETYPE Profile Type LTE LST IPCLKLINK
IPCLKLNK
BTS3900, BTS3900
NEGDURATION Negotiate Duration LTE LST IPCLKLINK
IPCLKLNK

IPMODE IP mode LTE LST IPCLKLINK
IPCLKLNK

CIPV6 Client IPv6 LTE LST IPCLKLINK
IPCLKLNK
BTS3900, BTS3900
SIPV6 Server IPv6 LTE LST IPCLKLINK
IPCLKLNK
BTS3900, BTS3900
PREHOPIP Pre-Hop IPv4 LTE LST IPCLKLINK
IPCLKLNK
BTS3900, BTS3900
PDelay Request WCDMA, BTS3900 ADD IPCLKLINK
PDELAYREQFREQ Freq LTE LST IPCLKLINK
SYNCETH ADD SYNCETH
DSP SYNCETH
BTS3900, BTS3900 MOD SYNCETH
WCDMA, BTS3900 RMV SYNCETH
LN SyncEth Clock No. LTE LST SYNCETH
SYNCETH
BTS3900, BTS3900
WCDMA, BTS3900 ADD SYNCETH
CN Cabinet No. LTE LST SYNCETH
SYNCETH
BTS3900, BTS3900
SRN Subrack No. LTE LST SYNCETH
SYNCETH
BTS3900, BTS3900
SN Slot No. LTE LST SYNCETH
SYNCETH
BTS3900, BTS3900
PN Port No. LTE LST SYNCETH
SYNCETH
ADD SYNCETH
BTS3900, BTS3900 MOD SYNCETH
WCDMA, BTS3900 DSP SYNCETH
SSM SSM Selection LTE LST SYNCETH
SYNCETH
BTS3900, BTS3900
WCDMA, BTS3900
ActiveState Link Active State LTE DSP SYNCETH
SYNCETH
BTS3900, BTS3900
WCDMA, BTS3900
AvailableState Link Available State LTE DSP SYNCETH
SYNCETH
BTS3900, BTS3900 ADD SYNCETH

WCDMA, BTS3900 MOD SYNCETH
PRI Priority LTE LST SYNCETH
SYNCETH
BTS3900, BTS3900 ADD SYNCETH

TYPE SyncEth Type LTE LST SYNCETH
TASM
BTS3900, BTS3900 SET CLKMODE

WCDMA, BTS3900 DSP CLKSRC
SRCNO Clock Source No. LTE LST CLKMODE
TASM
BTS3900, BTS3900
Selected Clock WCDMA, BTS3900 SET CLKMODE
CLKSRC Source LTE LST CLKMODE
TASM
BTS3900, BTS3900 SET CLKMODE

Clock Working WCDMA, BTS3900 DSP CLKSTAT
MODE Mode LTE LST CLKMODE
TASM
BTS3900, BTS3900
WCDMA, BTS3900 SET IPCLKALGO
ALGORITHM Algorithm LTE LST IPCLKALGO
TASM
BTS3900, BTS3900
FREECOUNT Free Count LTE LST IPCLKALGO
TASM
BTS3900, BTS3900
SEARCHCOUNT Search Count LTE LST IPCLKALGO
TASM
BTS3900, BTS3900
HOLDCOUNT Hold Count LTE LST IPCLKALGO
TASM
BTS3900, BTS3900
LOCKCOUNT Lock Count LTE LST IPCLKALGO
TASM
BTS3900, BTS3900
SAMPLETIME Sample Time LTE LST IPCLKALGO
TASM
IP Clock Time BTS3900, BTS3900

Synchronization WCDMA, BTS3900 SET CLKMODE
SYNMODE Mode LTE LST CLKMODE
TASM
BTS3900, BTS3900
PERIOD Period LTE LST CLKMODE
TASM
BTS3900, BTS3900
TM Time LTE LST CLKMODE
TASM
SET
CLKSYNCMODE
Clock BTS3900, BTS3900 DSP CLKSTAT
Synchronization WCDMA, BTS3900 LST
CLKSYNCMODE Mode LTE CLKSYNCMODE
TASM
BTS3900, BTS3900
Current Clock WCDMA, BTS3900
CurrentSrcStatus Source State LTE DSP CLKSTAT
TASM
BTS3900, BTS3900 DSP CLKRECORD

WCDMA, BTS3900 DSP CLKSTAT
PllStatus PLL Status LTE DSP CLKTST
TASM
BTS3900, BTS3900
Current Clock WCDMA, BTS3900
CurrentSrc Source LTE DSP CLKSTAT
DSP CLKDA
DSP CLKRECORD
DSP CLKSTAT
DSP CLKTHD
DSP CLKTST
DSP DARECORD
DSP
FREQDIFFRSLT
TASM DSP TSTCLKOUT
LST
CLKDATARECORD
MOD CENTERDA
MOD CURRDA
SET CLKTHD
SET TSTCLKOUT
STP CLKTST
BTS3900, BTS3900 STR CLKTST
WCDMA, BTS3900 STR
CN Cabinet No. LTE FREQDIFFCHK
DSP CLKDA
DSP CLKRECORD
DSP CLKSTAT
DSP CLKTHD
DSP CLKTST
DSP DARECORD
DSP
FREQDIFFRSLT
TASM DSP TSTCLKOUT
LST
CLKDATARECORD
MOD CENTERDA
MOD CURRDA
SET CLKTHD
SET TSTCLKOUT
STP CLKTST
WCDMA, BTS3900 STR
SRN Subrack No. LTE FREQDIFFCHK
DSP CLKDA
DSP CLKRECORD
DSP CLKSTAT
DSP CLKTHD
DSP CLKTST
DSP DARECORD
DSP
FREQDIFFRSLT
TASM DSP TSTCLKOUT
LST
CLKDATARECORD
MOD CENTERDA
MOD CURRDA
SET CLKTHD
SET TSTCLKOUT
STP CLKTST
WCDMA, BTS3900 STR
SN Slot No. LTE FREQDIFFCHK
TASM
BTS3900, BTS3900 SET LOCALCLKQL

QL Quality Level LTE LST LOCALCLKQL
TASM
Um Interface Soft BTS3900, BTS3900

Synchronization WCDMA, BTS3900
STATE Status LTE DSP AISSSTAT
TASM
BTS3900, BTS3900
Um Soft Syn Phase WCDMA, BTS3900 SET AISS
FREQUENCE Adjustment Period LTE LST AISS
TASM
Soft-synchronized BTS3900, BTS3900

Network Adaptive WCDMA, BTS3900 SET AISS
NETMODE Mode LTE LST AISS
TASM
Um Interface Soft BTS3900, BTS3900

Synchronization WCDMA, BTS3900 SET AISS
FLAG Switch LTE LST AISS
TASM
BTS3900, BTS3900
WCDMA, BTS3900 SET CLKMODE
DAY Day LTE LST CLKMODE
SET
TASM CLKSYNCMODE
BTS3900, BTS3900 DSP CLKSTAT
GSM Frame Bit WCDMA, BTS3900 LST
GSM_FBOFFSET Offset LTE CLKSYNCMODE
ADD
BASEBANDEQM
LST
BASEBANDEQM BASEBANDEQM
MOD
BTS3900, BTS3900 BASEBANDEQM
Baseband WCDMA, BTS3900 RMV
BASEBANDEQMID Equipment ID LTE BASEBANDEQM
ADD
BASEBANDEQM
LST
BASEBANDEQM BASEBANDEQM
MOD
BTS3900, BTS3900 BASEBANDEQM
BASEBANDEQMT Baseband WCDMA, BTS3900 RMV
YPE Equipment Type LTE BASEBANDEQM
BASEBANDEQM
ADD
UMTS UL BTS3900, BTS3900 BASEBANDEQM
Demodulation WCDMA, BTS3900 LST
UMTSDEMMODE Mode LTE BASEBANDEQM
BASEBANDEQM BTS3900, BTS3900

BASEBANDEQMB Baseband WCDMA, BTS3900
OARD Equipment Board LTE None

BASEBANDEQMB WCDMA, BTS3900 LST
OARDREF.CN Cabinet No. LTE BASEBANDEQM
OARDREF.SN Slot No. LTE BASEBANDEQM

OARDREF.SRN Subrack No. LTE BASEBANDEQM
ADD SECTOR
DSP SECTOR
SECTOR BTS3900, BTS3900 LST SECTOR
WCDMA, BTS3900 MOD SECTOR
SECTORID Sector ID LTE RMV SECTOR
SECTOR BTS3900, BTS3900 ADD SECTOR

SECNAME Sector Name LTE LST SECTOR
SECTOR BTS3900, BTS3900 ADD SECTOR

LOCATIONNAME Location Name LTE LST SECTOR
SECTOR
BTS3900, BTS3900 ADD SECTOR

USERLABEL User Label LTE LST SECTOR
SECTOR BTS3900, BTS3900

WCDMA, BTS3900
SECTORANTENNA Sector Antenna LTE None
SECTOR
BTS3900, BTS3900
SECTORANTENNA Antenna Channel WCDMA, BTS3900
REF.ANTN No. LTE LST SECTOR

SECTORANTENNA WCDMA, BTS3900
REF.CN Cabinet No. LTE LST SECTOR

REF.SN Slot No. LTE LST SECTOR

REF.SRN Subrack No. LTE LST SECTOR
SECTOR
BTS3900, BTS3900
RX Frequency WCDMA, BTS3900
RXFREQRANGE Range LTE DSP SECTOR
SECTOR
BTS3900, BTS3900
TX Frequency WCDMA, BTS3900
TXFREQRANGE Range LTE DSP SECTOR
SECTOR
BTS3900, BTS3900
WCDMA, BTS3900
SECTORLICENSE Sector License LTE DSP SECTOR
BTS3900, BTS3900
SECTOR WCDMA, BTS3900
LICENSESTATUS License State LTE DSP SECTOR
ADD SECTOREQM
LST SECTOREQM
MOD
SECTOREQM BTS3900, BTS3900 SECTOREQM
Sector Equipment WCDMA, BTS3900 RMV SECTOREQM
SECTOREQMID ID LTE LST SECTOR
SECTOREQM BTS3900, BTS3900

WCDMA, BTS3900 ADD SECTOREQM
SECTORID Sector ID LTE LST SECTOREQM

SECTOREQMANT Sector Equipment WCDMA, BTS3900
ENNA Antenna LTE None
SECTOREQM
BTS3900, BTS3900
SECTOREQMANT Antenna Channel WCDMA, BTS3900
ENNAREF.ANTN No. LTE LST SECTOREQM
SECTOREQM
BTS3900, BTS3900
SECTOREQMANT WCDMA, BTS3900
ENNAREF.CN Cabinet No. LTE LST SECTOREQM
SECTOREQM SECTOREQMANT BTS3900, BTS3900

ENNAREF.ANTTYP Antenna RX/TX WCDMA, BTS3900
E Mode LTE LST SECTOREQM

ENNAREF.SN Slot No. LTE LST SECTOREQM
SECTOREQM
BTS3900, BTS3900
ENNAREF.SRN Subrack No. LTE LST SECTOREQM
SECTOREQM SECTOREQMANT BTS3900, BTS3900
ENNAREF.TXBKP TX Antenna WCDMA, BTS3900
MODE Master/Slave Mode LTE LST SECTOREQM
BRI BTS3900, BTS3900

WCDMA, BTS3900
CN Cabinet No. LTE None

WCDMA, BTS3900
SRN Subrack No. LTE None

WCDMA, BTS3900
SN Slot No. LTE None
BTS3900, BTS3900
BRI WCDMA, BTS3900
TYPE Board Type LTE None
BRI
BTS3900, BTS3900
WCDMA, BTS3900
ADMSTATE Administrative state LTE None

Duration of the WCDMA, BTS3900
TIME shutting down state LTE None
BRI
BTS3900, BTS3900
WCDMA, BTS3900
BLKTP Block Type LTE None
BRI
BTS3900, BTS3900
WCDMA, BTS3900
AlarmState Alarm Status LTE DSP BRD
BRI
BTS3900, BTS3900
WCDMA, BTS3900
OpState Operational State LTE DSP BRD
BRI
BTS3900, BTS3900
WCDMA, BTS3900
AvailabilityStatus Availability Status LTE DSP BRD
BRI
BTS3900, BTS3900
WCDMA, BTS3900
Elabel Electronic Label LTE DSP ELABEL
BTS3900, BTS3900
BRI WCDMA, BTS3900 DSP
BoardType Type LTE BRDMFRINFO
DSP
BRDMFRINFO
BRI BTS3900, BTS3900 DSP CABMFRINFO
WCDMA, BTS3900 DSP
BoardSerial Serial Number LTE HWTSTRESULT
DSP
BRI BRDMFRINFO
BTS3900, BTS3900 DSP CABMFRINFO
WCDMA, BTS3900 DSP
BoardDesc Description LTE HWTSTRESULT
BRI BTS3900, BTS3900 DSP

Date of WCDMA, BTS3900 BRDMFRINFO
BoardManu Manufacture LTE DSP CABMFRINFO
BRI BTS3900, BTS3900 DSP

WCDMA, BTS3900 BRDMFRINFO
BoardVendor Vendor LTE DSP CABMFRINFO
BTS3900, BTS3900
BoardIssue Issue Number LTE BRDMFRINFO
BRI
BTS3900, BTS3900
WCDMA, BTS3900
RuType Config Type LTE DSP BRD
BRI
BTS3900, BTS3900
WCDMA, BTS3900
BoardTemperature Board Temperature LTE DSP BRDTEMP
BRI
BTS3900, BTS3900
WCDMA, BTS3900
HPATemperature HPA Temperature LTE DSP BRDTEMP
BRI
BTS3900, BTS3900
WCDMA, BTS3900
DEVTYPE DEVTYPE LTE DSP ELABEL
BTS3900, BTS3900
SoftVer Software Version LTE HWTSTRESULT
BTS3900, BTS3900
HardVer Hardware Version LTE HWTSTRESULT
BTS3900, BTS3900
BtrmVer BootRom Version LTE HWTSTRESULT
GTMU BTS3900, BTS3900

WCDMA, BTS3900

WCDMA, BTS3900

WCDMA, BTS3900

WCDMA, BTS3900
GTMU
BTS3900, BTS3900
WCDMA, BTS3900

TIME shutting down state LTE None
GTMU
BTS3900, BTS3900
WCDMA, BTS3900
BLKTP Block Type LTE None
GTMU
BTS3900, BTS3900
WCDMA, BTS3900
GTMU
BTS3900, BTS3900
WCDMA, BTS3900
GTMU
BTS3900, BTS3900
WCDMA, BTS3900
GTMU
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
GTMU WCDMA, BTS3900 DSP
DSP
BRDMFRINFO
GTMU BTS3900, BTS3900 DSP CABMFRINFO
WCDMA, BTS3900 DSP
DSP
GTMU BRDMFRINFO
WCDMA, BTS3900 DSP
GTMU BTS3900, BTS3900 DSP

GTMU BTS3900, BTS3900 DSP

BTS3900, BTS3900
GTMU
BTS3900, BTS3900
WCDMA, BTS3900
GTMU
BTS3900, BTS3900
WCDMA, BTS3900
GTMU
BTS3900, BTS3900
WCDMA, BTS3900
GTMU
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
LOCATION BTS3900, BTS3900 ADD LOCATION

WCDMA, BTS3900 MOD LOCATION
ADDRESS address LTE LST LOCATION

ALTITUDE Altitude LTE LST LOCATION

CITY City LTE LST LOCATION
LOCATION
BTS3900, BTS3900 ADD LOCATION
CONTACT Contact LTE LST LOCATION
LOCATION

Geo-coordinate WCDMA, BTS3900 MOD LOCATION
GCDF Data Format LTE LST LOCATION

LATITUDEDEGFO Latitude With WCDMA, BTS3900 MOD LOCATION
RMAT Degree Format LTE LST LOCATION
LOCATION

LATITUDESECFOR Latitude With WCDMA, BTS3900 MOD LOCATION
MAT Second Format LTE LST LOCATION

LOCATIONID Location Id LTE LST LOCATION
ADD LOCATION
LOCATION BTS3900, BTS3900 LST LOCATION
LOCATIONNAME Location Name LTE RMV LOCATION

LONGITUDEDEGF Longitude With WCDMA, BTS3900 MOD LOCATION
ORMAT Degree Format LTE LST LOCATION
LOCATION

LONGITUDESECF Longitude With WCDMA, BTS3900 MOD LOCATION
ORMAT Second Format LTE LST LOCATION
OFFICE Office LTE LST LOCATION

RANGE Range LTE LST LOCATION

REGION Region LTE LST LOCATION

TELEPHONE Telephone LTE LST LOCATION

USERLABEL User Label LTE LST LOCATION
LOCATION

PRECISE Precise LTE LST LOCATION
MAINSALARMBIND BTS3900, BTS3900

Base Station WCDMA, BTS3900 MOD NMSABIND
ISDSWITCH Almport Switch LTE LST NMSABIND

Almport Cabinet WCDMA, BTS3900 MOD NMSABIND
NMSACN No. LTE LST NMSABIND

Almport Subrack WCDMA, BTS3900 MOD NMSABIND
NMSASRN No. LTE LST NMSABIND

WCDMA, BTS3900 MOD NMSABIND
NMSASN Almport Slot No. LTE LST NMSABIND
WCDMA, BTS3900 MOD NMSABIND
NMSAPN Almport Port No. LTE LST NMSABIND
NE BTS3900, BTS3900
WCDMA, BTS3900 SET NE
LOCATION Site Location LTE LST NE
BTS3900, BTS3900
NE WCDMA, BTS3900
SWVERSION Software Version LTE LST NE
NE BTS3900, BTS3900
USERLABEL User Label LTE LST NE
NE
BTS3900, BTS3900
WCDMA, BTS3900
NERMVERSION NeRM Version LTE LST NE
BTS3900, BTS3900
NE WCDMA, BTS3900
INTERFACEID Product InterfaceID LTE None
NE BTS3900, BTS3900
PRODUCTVERSIO WCDMA, BTS3900
N Product Version LTE LST NE
BTS3900, BTS3900
NE WCDMA, BTS3900
LMTVERSION LMT Version LTE None
NE
BTS3900, BTS3900
Deployment WCDMA, BTS3900 SET NE
DID Identifier LTE LST NE
NE
BTS3900, BTS3900
SITENAME Site Name LTE LST NE
NE
BTS3900, BTS3900
Network Element WCDMA, BTS3900 SET NE
NENAME Name LTE LST NE
NODE
BTS3900, BTS3900
WCDMA, BTS3900
PRODUCTTYPE Product Type LTE LST NODE
NODE BTS3900, BTS3900

WCDMA, BTS3900
USERLABEL User Label LTE LST NODE
BTS3900, BTS3900
NODE WCDMA, BTS3900
NERMVERSION NeRM Version LTE LST NODE

WCDMA, BTS3900
NODEID Node Identifier LTE LST NODE

WCDMA, BTS3900
NODENAME Node Name LTE LST NODE
NODE
BTS3900, BTS3900
WCDMA, BTS3900
WM Working Mode LTE LST NODE
BBP BTS3900, BTS3900 DSP BBPTC

WCDMA, BTS3900 LST BBP
CN Cabinet No. LTE MOD BBP
BBP BTS3900, BTS3900 DSP BBPTC

SRN Subrack No. LTE MOD BBP
BBP
BTS3900, BTS3900 DSP BBPTC

SN Slot No. LTE MOD BBP
BBP
BTS3900, BTS3900
WCDMA, BTS3900
TYPE Board Type LTE MOD BBP
BBP
BTS3900, BTS3900 ADD BRD

WCDMA, BTS3900 MOD BBP
WM Work Mode LTE LST BBP
BBP
BTS3900, BTS3900
WCDMA, BTS3900
BBP BTS3900, BTS3900

TIME shutting down state LTE BLK BRD
BBP
BTS3900, BTS3900
WCDMA, BTS3900
BLKTP Block Type LTE BLK BRD
BBP

Hardware Capacity WCDMA, BTS3900 MOD BBP
HCE Enhance LTE LST BBP
BBP

WCDMA, BTS3900 MOD BBP
CPRIEX CPRI Extension LTE LST BBP
BBP
BTS3900, BTS3900
Base Band Work WCDMA, BTS3900 ADD BRD
BBWS Standard LTE LST BBP
BBP BTS3900, BTS3900

WCDMA, BTS3900
BbpCapacity BBP Capacity LTE DSP BBPTC
BBP
BTS3900, BTS3900
WCDMA, BTS3900
BBP
BTS3900, BTS3900
WCDMA, BTS3900
BBP
BTS3900, BTS3900
WCDMA, BTS3900
BBP
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
BBP WCDMA, BTS3900 DSP
DSP
BRDMFRINFO
BBP BTS3900, BTS3900 DSP CABMFRINFO
WCDMA, BTS3900 DSP
DSP
BBP BRDMFRINFO
WCDMA, BTS3900 DSP
BBP BTS3900, BTS3900 DSP

BBP BTS3900, BTS3900 DSP

BTS3900, BTS3900
BBP
BTS3900, BTS3900
WCDMA, BTS3900
BBP
BTS3900, BTS3900
WCDMA, BTS3900
BBP
BTS3900, BTS3900
WCDMA, BTS3900
BBP
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
ADD BBPLNK
BBPLINK BTS3900, BTS3900 LST BBPLNK
WCDMA, BTS3900 MOD BBPLNK
LN Link No. LTE RMV BBPLNK
BBPLINK
BTS3900, BTS3900 ADD BBPLNK

HCN Head Cabinet No. LTE LST BBPLNK
BBPLINK

HSRN Head Subrack No. LTE LST BBPLNK
BBPLINK BTS3900, BTS3900 ADD BBPLNK

HSN Head Slot No. LTE LST BBPLNK
BBPLINK

HPN Head Port No. LTE LST BBPLNK
BBPLINK

TCN Tail Cabinet No. LTE LST BBPLNK
BBPLINK

TSRN Tail Subrack No. LTE LST BBPLNK
BBPLINK BTS3900, BTS3900 ADD BBPLNK

TSN Tail Slot No. LTE LST BBPLNK
BBPLINK

TPN Tail Port No. LTE LST BBPLNK
BBPLINK
BTS3900, BTS3900
WCDMA, BTS3900
CLBR CPRI Line Bit Rate LTE DSP BBPLNK
BBPLINK BTS3900, BTS3900

WCDMA, BTS3900
CN Cabinet No. LTE DSP BBPLNK

WCDMA, BTS3900
SRN Subrack No. LTE DSP BBPLNK

WCDMA, BTS3900
SN Slot No. LTE DSP BBPLNK
BBPLINK
BTS3900, BTS3900
WCDMA, BTS3900
PN Port No. LTE DSP BBPLNK
BBPLINK
BTS3900, BTS3900
WCDMA, BTS3900
PCN Peer Cabinet No. LTE DSP BBPLNK
BBPLINK
BTS3900, BTS3900
WCDMA, BTS3900
PSRN Peer Subrack No. LTE DSP BBPLNK
BBPLINK
BTS3900, BTS3900
WCDMA, BTS3900
PSN Peer Slot No. LTE DSP BBPLNK
BBPLINK
BTS3900, BTS3900
WCDMA, BTS3900
PPN Peer Port No. LTE DSP BBPLNK
BBPLINK
BTS3900, BTS3900
WCDMA, BTS3900
SLBR SRIO Line Bit Rate LTE DSP BBPLNK
BBUFAN BTS3900, BTS3900

WCDMA, BTS3900
CN Cabinet No. LTE DSP FAN

WCDMA, BTS3900
SRN Subrack No. LTE DSP FAN
WCDMA, BTS3900
SN Slot No. LTE DSP FAN
BBUFAN
BTS3900, BTS3900
WCDMA, BTS3900
Temperature Temperature LTE DSP FAN
BBUFAN
BTS3900, BTS3900
WCDMA, BTS3900
SpeedRate Fan Speed Rate LTE DSP FAN
BBUFAN
BTS3900, BTS3900
WCDMA, BTS3900
BBUFAN
BTS3900, BTS3900
WCDMA, BTS3900
BBUFAN
BTS3900, BTS3900
WCDMA, BTS3900
BBUFAN
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
BBUFAN WCDMA, BTS3900 DSP
DSP
BRDMFRINFO
BBUFAN BTS3900, BTS3900 DSP CABMFRINFO
WCDMA, BTS3900 DSP
DSP
BBUFAN BRDMFRINFO
WCDMA, BTS3900 DSP
BBUFAN BTS3900, BTS3900 DSP

BBUFAN BTS3900, BTS3900 DSP

BTS3900, BTS3900
BBUFAN
BTS3900, BTS3900
WCDMA, BTS3900
BBUFAN
BTS3900, BTS3900
WCDMA, BTS3900
BBUFAN
BTS3900, BTS3900
WCDMA, BTS3900
BBUFAN
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
ADD CCU
CLR CCUALM
CCU DSP CCU
BTS3900, BTS3900 LST CCU
WCDMA, BTS3900 MOD CCU
CN Cabinet No. LTE RMV CCU
ADD CCU
CLR CCUALM
CCU DSP CCU
SRN Subrack No. LTE RMV CCU
ADD CCU
CLR CCUALM
CCU DSP CCU
SN Slot No. LTE RMV CCU
CCU BTS3900, BTS3900 ADD CCU

Manager Cabinet WCDMA, BTS3900 MOD CCU
MCN No. LTE LST CCU

Manager Subrack WCDMA, BTS3900 MOD CCU
MSRN No. LTE LST CCU
CCU
BTS3900, BTS3900 ADD CCU

MPN Manager Port No. LTE LST CCU

DCF DirectConnectFlag LTE LST CCU
ADD CCU
CCU BTS3900, BTS3900 MOD CCU
WCDMA, BTS3900 DSP CCU
CCN Cascade No. LTE LST CCU
CS Connected RAT LTE LST CCU
CCU
BTS3900, BTS3900 ADD CCU

Special Boolean WCDMA, BTS3900 MOD CCU
SBAF Alarm Flag LTE LST CCU
CCU BTS3900, BTS3900

WCDMA, BTS3900
LPortStatus Left Port Status LTE DSP CCU

WCDMA, BTS3900
RPortStatus Right Port Status LTE DSP CCU
BTS3900, BTS3900
CCU WCDMA, BTS3900
SoftwareVersion Software Version LTE DSP CCU
BTS3900, BTS3900
CCU WCDMA, BTS3900
PCBVersion PCB Version LTE DSP CCU

WCDMA, BTS3900
EPLDVersion EPLD Version LTE DSP CCU
BTS3900, BTS3900
CPRILBR WCDMA, BTS3900 DSP CPRILBR
RCN RRU Chain No. LTE STR CPRILBRNEG
DSP BBPLNKSTAT
LST
CASCADEPORT BTS3900, BTS3900 CASCADEPORT
WCDMA, BTS3900 SET
CN Cabinet No. LTE CASCADEPORT
DSP BBPLNKSTAT
LST
WCDMA, BTS3900 SET
SRN Subrack No. LTE CASCADEPORT
DSP BBPLNKSTAT
LST
WCDMA, BTS3900 SET
SN Slot No. LTE CASCADEPORT
DSP BBPLNKSTAT
LST
WCDMA, BTS3900 SET
PN Port No. LTE CASCADEPORT
CASCADEPORT
BTS3900, BTS3900
WCDMA, BTS3900 LST
PT Port Type LTE CASCADEPORT
CASCADEPORT
SET
BTS3900, BTS3900 CASCADEPORT
WCDMA, BTS3900 LST
SW Switch LTE CASCADEPORT
CPRIPORT
DSP CPRIPORT
WCDMA, BTS3900 RRUCHAINPHYTO
CN Cabinet No. LTE PO
CPRIPORT
DSP CPRIPORT
SRN Subrack No. LTE PO
CPRIPORT
DSP CPRIPORT
SN Slot No. LTE PO
CPRIPORT
DSP CPRIPORT
OPTN Port No. LTE PO
CPRIPORT
BTS3900, BTS3900
WCDMA, BTS3900
CpriRate CPRI Bit Rate LTE DSP CPRIPORT
CPRIPORT
BTS3900, BTS3900
WCDMA, BTS3900
AdmState Block Status LTE DSP CPRIPORT
CPRIPORT
BTS3900, BTS3900
WCDMA, BTS3900
InstallStatus Install Status LTE DSP CPRIPORT
CPRIPORT
BTS3900, BTS3900
WCDMA, BTS3900
CPRIPortMode CPRI Port Mode LTE DSP CPRIPORT
CPRIPORT
BTS3900, BTS3900
WCDMA, BTS3900
PortType Port Type LTE DSP CPRIPORT
CPRIPORT BTS3900, BTS3900

CPRI Port Mux WCDMA, BTS3900
CpriMuxStatus Status LTE DSP CPRIPORT
ENERGYCON Energy BTS3900, BTS3900

Consumption WCDMA, BTS3900 SET ECMP
MP Measurement Point LTE LST ECMP
DSP
LOCALUSBPORT
MPT LST
BTS3900, BTS3900 LOCALUSBPORT
WCDMA, BTS3900 SET
CN Cabinet No. LTE LOCALUSBPORT
DSP
LOCALUSBPORT
MPT LST
WCDMA, BTS3900 SET
SRN Subrack No. LTE LOCALUSBPORT
DSP
LOCALUSBPORT
MPT LST
WCDMA, BTS3900 SET
SN Slot No. LTE LOCALUSBPORT
BTS3900, BTS3900
MPT WCDMA, BTS3900
MPT SET
LOCALUSBPORT
DSP
WCDMA, BTS3900 LST
SWITCH Enable Flag LTE LOCALUSBPORT
MPT
BTS3900, BTS3900
WCDMA, BTS3900
StandbyStatus Standby Status LTE DSP BRD
MPT
BTS3900, BTS3900
WCDMA, BTS3900
MPT
BTS3900, BTS3900
WCDMA, BTS3900
MPT
BTS3900, BTS3900
WCDMA, BTS3900
MPT
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
MPT WCDMA, BTS3900 DSP
DSP
BRDMFRINFO
MPT BTS3900, BTS3900 DSP CABMFRINFO
WCDMA, BTS3900 DSP
DSP
MPT BRDMFRINFO
WCDMA, BTS3900 DSP
MPT BTS3900, BTS3900 DSP

MPT BTS3900, BTS3900 DSP

BTS3900, BTS3900
MPT
BTS3900, BTS3900
WCDMA, BTS3900
MPT
BTS3900, BTS3900
WCDMA, BTS3900
MPT
BTS3900, BTS3900
WCDMA, BTS3900
MPT
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
PEU BTS3900, BTS3900

WCDMA, BTS3900
CN Cabinet No. LTE DSP UPEU

WCDMA, BTS3900
SRN Subrack No. LTE DSP UPEU

WCDMA, BTS3900
SN Slot No. LTE DSP UPEU
BTS3900, BTS3900
PEU WCDMA, BTS3900
UpeuSparePower UPEU Spare Power LTE DSP UPEU
BTS3900, BTS3900
PEU WCDMA, BTS3900
BbuSparePower BBU Spare Power LTE DSP UPEU
PEU
BTS3900, BTS3900
WCDMA, BTS3900
PEU
BTS3900, BTS3900
WCDMA, BTS3900
PEU
BTS3900, BTS3900
WCDMA, BTS3900
PEU
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
PEU WCDMA, BTS3900 DSP
DSP
BRDMFRINFO
PEU BTS3900, BTS3900 DSP CABMFRINFO
WCDMA, BTS3900 DSP
DSP
PEU BRDMFRINFO
WCDMA, BTS3900 DSP
PEU BTS3900, BTS3900 DSP

PEU BTS3900, BTS3900 DSP

BTS3900, BTS3900
PEU
BTS3900, BTS3900
WCDMA, BTS3900
PEU
BTS3900, BTS3900
WCDMA, BTS3900
PEU
BTS3900, BTS3900
WCDMA, BTS3900
PEU
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
PSUIS BTS3900, BTS3900

PSU Intelligent WCDMA, BTS3900 SET PSUISS
PSUISS Shutdown Switch LTE LST PSUISS
SFP BTS3900, BTS3900

WCDMA, BTS3900
CN Cabinet No. LTE DSP SFP

WCDMA, BTS3900
SRN Subrack No. LTE DSP SFP

WCDMA, BTS3900
SN Slot No. LTE DSP SFP
SFP
BTS3900, BTS3900
WCDMA, BTS3900
MODULEID Port No. LTE DSP SFP

WCDMA, BTS3900
InstallStatus Installed status LTE DSP SFP
SFP
BTS3900, BTS3900
WCDMA, BTS3900
OptType SFP Module Type LTE DSP SFP

WCDMA, BTS3900
VendorName Manufacturer name LTE DSP SFP
SFP
BTS3900, BTS3900
WCDMA, BTS3900
TransMode Transmission Mode LTE DSP SFP
BTS3900, BTS3900
SFP WCDMA, BTS3900
WaveLength Wavelength LTE DSP SFP

Transmission code WCDMA, BTS3900
Rating rate LTE DSP SFP
SFP
Transmission
distance of single-
mode fiber (9- BTS3900, BTS3900
micrometer core WCDMA, BTS3900
LinkLength0 diameter) LTE DSP SFP
SFP
Transmission
distance of single-
SFP
Transmission
distance of multi-
SFP
Transmission
distance of multi-
mode fiber (62.5- BTS3900, BTS3900
SFP
BTS3900, BTS3900
WCDMA, BTS3900
Temperature Temperature LTE DSP SFP
SFP
BTS3900, BTS3900
WCDMA, BTS3900
Voltage Voltage LTE DSP SFP
SFP
BTS3900, BTS3900
WCDMA, BTS3900
Current Current LTE DSP SFP
SFP
BTS3900, BTS3900
WCDMA, BTS3900
OutputPower TX optical power LTE DSP SFP
SFP
BTS3900, BTS3900
WCDMA, BTS3900
InputPower RX optical power LTE DSP SFP

Receive Power WCDMA, BTS3900
RxPwrHiThreshold Upper Threshold LTE DSP SFP

Receive Power WCDMA, BTS3900
RxPwrLoThreshold Lower Threshold LTE DSP SFP

Transmit Power WCDMA, BTS3900
TxPwrHiThreshold Upper Threshold LTE DSP SFP

Transmit Power WCDMA, BTS3900
TxPwrLoThreshold Lower Threshold LTE DSP SFP
DSP BRDRAT
TRP BTS3900, BTS3900 LST UTRP
WCDMA, BTS3900 MOD UTRP
CN Cabinet No. LTE SET BRDRAT
DSP BRDRAT
SRN Subrack No. LTE SET BRDRAT
DSP BRDRAT
SN Slot No. LTE SET BRDRAT
TRP
BTS3900, BTS3900
SUBTYPE SubBoard Type LTE LST UTRP
TRP
BTS3900, BTS3900
WCDMA, BTS3900
TRP
BTS3900, BTS3900
WCDMA, BTS3900
TRP
BTS3900, BTS3900
WCDMA, BTS3900
TRP
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
TRP WCDMA, BTS3900 DSP
DSP
BRDMFRINFO
TRP BTS3900, BTS3900 DSP CABMFRINFO
WCDMA, BTS3900 DSP
DSP
TRP BRDMFRINFO
WCDMA, BTS3900 DSP
TRP BTS3900, BTS3900 DSP

TRP BTS3900, BTS3900 DSP

BTS3900, BTS3900
TRP
BTS3900, BTS3900
WCDMA, BTS3900
TRP
BTS3900, BTS3900
WCDMA, BTS3900
TRP
BTS3900, BTS3900
WCDMA, BTS3900
TRP
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
UCIU WCDMA, BTS3900
BTS3900, BTS3900
UCIU WCDMA, BTS3900
BTS3900, BTS3900
UCIU WCDMA, BTS3900
UCIU
BTS3900, BTS3900
WCDMA, BTS3900
UCIU
BTS3900, BTS3900
WCDMA, BTS3900
UCIU
BTS3900, BTS3900
WCDMA, BTS3900
UCIU
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
UCIU WCDMA, BTS3900 DSP
DSP
BRDMFRINFO
UCIU BTS3900, BTS3900 DSP CABMFRINFO
WCDMA, BTS3900 DSP
DSP
UCIU BRDMFRINFO
WCDMA, BTS3900 DSP
UCIU BTS3900, BTS3900 DSP

UCIU BTS3900, BTS3900 DSP

BTS3900, BTS3900
UCIU
BTS3900, BTS3900
WCDMA, BTS3900
UCIU
BTS3900, BTS3900
WCDMA, BTS3900
UCIU
BTS3900, BTS3900
WCDMA, BTS3900
UCIU
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
UEIU BTS3900, BTS3900

WCDMA, BTS3900

WCDMA, BTS3900

WCDMA, BTS3900
UEIU
BTS3900, BTS3900
WCDMA, BTS3900
UEIU
BTS3900, BTS3900
WCDMA, BTS3900
UEIU
BTS3900, BTS3900
WCDMA, BTS3900
UEIU
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
UEIU WCDMA, BTS3900 DSP
DSP
BRDMFRINFO
UEIU BTS3900, BTS3900 DSP CABMFRINFO
WCDMA, BTS3900 DSP
DSP
UEIU BRDMFRINFO
WCDMA, BTS3900 DSP
UEIU BTS3900, BTS3900 DSP

UEIU BTS3900, BTS3900 DSP

BTS3900, BTS3900
UEIU
BTS3900, BTS3900
WCDMA, BTS3900
UEIU
BTS3900, BTS3900
WCDMA, BTS3900
UEIU
BTS3900, BTS3900
WCDMA, BTS3900
UEIU
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
USCU BTS3900, BTS3900

WCDMA, BTS3900
USCU
BTS3900, BTS3900
WCDMA, BTS3900
USCU BTS3900, BTS3900

WCDMA, BTS3900
USCU
BTS3900, BTS3900
WCDMA, BTS3900
USCU
BTS3900, BTS3900
WCDMA, BTS3900
USCU
BTS3900, BTS3900
WCDMA, BTS3900
USCU
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
USCU WCDMA, BTS3900 DSP
DSP
BRDMFRINFO
USCU BTS3900, BTS3900 DSP CABMFRINFO
WCDMA, BTS3900 DSP
DSP
USCU BRDMFRINFO
WCDMA, BTS3900 DSP
USCU BTS3900, BTS3900 DSP

USCU BTS3900, BTS3900 DSP

BTS3900, BTS3900
USCU
BTS3900, BTS3900
WCDMA, BTS3900
USCU
BTS3900, BTS3900
WCDMA, BTS3900
USCU
BTS3900, BTS3900
WCDMA, BTS3900
USCU
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
EQUIPMENT
Battery Intelligent BTS3900, BTS3900

Management WCDMA, BTS3900 SET EQUIPMENT
BATIMS Switch LTE LST EQUIPMENT
EQUIPMENT
Power Lose BTS3900, BTS3900

Redundancy Alarm WCDMA, BTS3900 SET EQUIPMENT
PAE Enabled LTE LST EQUIPMENT
EQUIPMENT
BTS3900, BTS3900
WCDMA, BTS3900 SET MNTMODE
MNTMODE Maintenance Mode LTE LST MNTMODE
EQUIPMENT
BTS3900, BTS3900
Start Time of Status WCDMA, BTS3900 SET MNTMODE
ST Setting LTE LST MNTMODE
EQUIPMENT
BTS3900, BTS3900
End Time of Status WCDMA, BTS3900 SET MNTMODE
ET Setting LTE LST MNTMODE
EQUIPMENT BTS3900, BTS3900

Maintenance Mode WCDMA, BTS3900 SET MNTMODE
MMSETREMARK Setting Remark LTE LST MNTMODE
EQUIPMENT
BTS3900, BTS3900
Current WCDMA, BTS3900
CurrMNTMode Maintenance Mode LTE DSP MNTMODE
EQUIPMENT
BTS3900, BTS3900
Direct Voltage WCDMA, BTS3900 SET DVAS
DVAS Alarm Switch LTE LST DVAS
EQUIPMENT
Direct Voltage BTS3900, BTS3900

Alarm Occured WCDMA, BTS3900 SET DVAS
DVAH Threshold LTE LST DVAS
EQUIPMENT
Direct Voltage BTS3900, BTS3900

Alarm Restored WCDMA, BTS3900 SET DVAS
DVAL Threshold LTE LST DVAS
EQUIPMENT
BTS3900, BTS3900
Open DU Interface WCDMA, BTS3900 SET EQUIPMENT
ODIID ID LTE LST EQUIPMENT
EQUIPMENT
BTS3900, BTS3900
WCDMA, BTS3900
EQUIPMENTTY Equipment Type LTE LST EQUIPMENT
EQUIPMENT
PSU Fault BTS3900, BTS3900

Shutdown TRX WCDMA, BTS3900 SET EQUIPMENT
PSUFP Enabled LTE LST EQUIPMENT
EQUIPMENT
BTS3900, BTS3900 SET EQUIPMENT

PROTOCOL Protocol Type LTE LST EQUIPMENT
EQUIPMENT
BTS3900, BTS3900
WCDMA, BTS3900 SET EQUIPMENT
SMARTTRX Smart TRX Switch LTE LST EQUIPMENT
ADD CABINET
DSP CABMFRINFO
CABINET BTS3900, BTS3900 LST CABINET
WCDMA, BTS3900 MOD CABINET
CN Cabinet No. LTE RMV CABINET
CABINET
BTS3900, BTS3900 ADD CABINET

TYPE Cabinet Type LTE LST CABINET
CABINET
BTS3900, BTS3900 ADD CABINET
DESC Cabinet Description LTE LST CABINET
BTS3900, BTS3900
CABINET WCDMA, BTS3900
CabinetType Model LTE DSP CABMFRINFO
SUBRACK ADD SUBRACK

BTS3900, BTS3900 LST SUBRACK
WCDMA, BTS3900 MOD SUBRACK
CN Cabinet No. LTE RMV SUBRACK
SUBRACK
ADD SUBRACK
BTS3900, BTS3900 LST SUBRACK
SRN Subrack No. LTE RMV SUBRACK
SUBRACK
BTS3900, BTS3900
WCDMA, BTS3900 ADD SUBRACK
TYPE Subrack Type LTE LST SUBRACK
SUBRACK
BTS3900, BTS3900 ADD SUBRACK
DESC Subrack Description LTE LST SUBRACK
SUBRACK
BTS3900, BTS3900
WCDMA, BTS3900
PWRTYPE Power Type LTE DSP PWRTYPE
RU
BTS3900, BTS3900
WCDMA, BTS3900
RU
BTS3900, BTS3900
WCDMA, BTS3900
RU
BTS3900, BTS3900
WCDMA, BTS3900
RU
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
RU WCDMA, BTS3900 DSP
DSP
BRDMFRINFO
RU BTS3900, BTS3900 DSP CABMFRINFO
WCDMA, BTS3900 DSP
DSP
RU BRDMFRINFO
WCDMA, BTS3900 DSP
RU BTS3900, BTS3900 DSP

RU BTS3900, BTS3900 DSP

BTS3900, BTS3900
RU
BTS3900, BTS3900
WCDMA, BTS3900
RU
BTS3900, BTS3900
WCDMA, BTS3900
RU
BTS3900, BTS3900
WCDMA, BTS3900
RU
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
ADD EMU
CLR EMUALM
EMU DSP EMU
BTS3900, BTS3900 LST EMU
WCDMA, BTS3900 MOD EMU
CN Cabinet No. LTE RMV EMU
ADD EMU
CLR EMUALM
EMU DSP EMU
SRN Subrack No. LTE RMV EMU
ADD EMU
CLR EMUALM
EMU DSP EMU
SN Slot No. LTE RMV EMU
EMU
BTS3900, BTS3900
Manager Cabinet WCDMA, BTS3900 ADD EMU
MCN No. LTE LST EMU
EMU
BTS3900, BTS3900
Manager Subrack WCDMA, BTS3900 ADD EMU
MSRN No. LTE LST EMU
EMU
BTS3900, BTS3900 ADD EMU

MPN Manager Port No. LTE LST EMU
EMU

ADDR Address LTE LST EMU
EMU

Temperature Alarm WCDMA, BTS3900 MOD EMU
TLTHD Lower Threshold LTE LST EMU
EMU

Temperature Alarm WCDMA, BTS3900 MOD EMU
TUTHD Upper Threshold LTE LST EMU
EMU
Humidity Alarm WCDMA, BTS3900 MOD EMU
HLTHD Lower Threshold LTE LST EMU
EMU
Humidity Alarm WCDMA, BTS3900 MOD EMU
HUTHD Upper Threshold LTE LST EMU
EMU

Special Analog WCDMA, BTS3900 MOD EMU
SAAF Alarm Flag LTE LST EMU
EMU

Special Boolean WCDMA, BTS3900 MOD EMU
SBAF Alarm Flag LTE LST EMU
EMU
BTS3900, BTS3900
Ambient WCDMA, BTS3900
Temperature Temperature LTE DSP EMU
BTS3900, BTS3900
EMU WCDMA, BTS3900
Humidity Ambient Humidity LTE DSP EMU
EMU BTS3900, BTS3900

WCDMA, BTS3900
Invol48 -48V Input Voltage LTE DSP EMU
EMU
BTS3900, BTS3900
Analog Port 1 WCDMA, BTS3900
Anain1 Measurement Value LTE DSP EMU
EMU
BTS3900, BTS3900
EMU
BTS3900, BTS3900
EMU
BTS3900, BTS3900
EMU
BTS3900, BTS3900
WCDMA, BTS3900
EMU
BTS3900, BTS3900
WCDMA, BTS3900
EMU
BTS3900, BTS3900
WCDMA, BTS3900
EMU
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
EMU WCDMA, BTS3900 DSP
DSP
BRDMFRINFO
EMU BTS3900, BTS3900 DSP CABMFRINFO
WCDMA, BTS3900 DSP
DSP
EMU BRDMFRINFO
WCDMA, BTS3900 DSP
EMU BTS3900, BTS3900 DSP

EMU BTS3900, BTS3900 DSP

BTS3900, BTS3900
EMU
BTS3900, BTS3900
WCDMA, BTS3900
EMU
BTS3900, BTS3900
WCDMA, BTS3900
EMU
BTS3900, BTS3900
WCDMA, BTS3900
EMU
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
ADD FMU
CLR FMUALM
FMU DSP FMU
BTS3900, BTS3900 LST FMU
WCDMA, BTS3900 MOD FMU
CN Cabinet No. LTE RMV FMU
ADD FMU
CLR FMUALM
FMU DSP FMU
SRN Subrack No. LTE RMV FMU
ADD FMU
CLR FMUALM
FMU DSP FMU
SN Slot No. LTE RMV FMU
FMU
BTS3900, BTS3900 ADD FMU
Manager Cabinet WCDMA, BTS3900 MOD FMU
MCN No. LTE LST FMU
FMU

Manager Subrack WCDMA, BTS3900 MOD FMU
MSRN No. LTE LST FMU
FMU

MPN Manager Port No. LTE LST FMU
FMU

ADDR Address LTE LST FMU
FMU

Special Boolean WCDMA, BTS3900 MOD FMU
SBAF Alarm Flag LTE LST FMU
FMU BTS3900, BTS3900

WCDMA, BTS3900
SpeedRate Fan Speed Rate LTE DSP FMU

Temperature at Fan WCDMA, BTS3900
TempOut Air Outlet LTE DSP FMU

Temperature at Fan WCDMA, BTS3900
TempIn Air Inlet LTE DSP FMU
WCDMA, BTS3900
AverageSpeed Fan Average Speed LTE DSP FMU
FMU

Smart Temperature WCDMA, BTS3900 MOD FMU
STC Control LTE LST FMU
FMU
ADD FMU
BTS3900, BTS3900 MOD FMU
Temperature WCDMA, BTS3900 DSP FMU
TCMODE Control Mode LTE LST FMU
FMU
BTS3900, BTS3900
WCDMA, BTS3900
FMU
BTS3900, BTS3900
WCDMA, BTS3900
FMU
BTS3900, BTS3900
WCDMA, BTS3900
FMU
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
FMU WCDMA, BTS3900 DSP
DSP
BRDMFRINFO
FMU BTS3900, BTS3900 DSP CABMFRINFO
WCDMA, BTS3900 DSP
DSP
FMU BRDMFRINFO
WCDMA, BTS3900 DSP
FMU BTS3900, BTS3900 DSP

FMU BTS3900, BTS3900 DSP

BTS3900, BTS3900
FMU
BTS3900, BTS3900
WCDMA, BTS3900
FMU
BTS3900, BTS3900
WCDMA, BTS3900
FMU
BTS3900, BTS3900
WCDMA, BTS3900
FMU
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
ADD TCU
CLR TCUALM
TCU DSP TCU
BTS3900, BTS3900 LST TCU
WCDMA, BTS3900 MOD TCU
CN Cabinet No. LTE RMV TCU
ADD TCU
CLR TCUALM
TCU DSP TCU
SRN Subrack No. LTE RMV TCU
TCU
ADD TCU
CLR TCUALM
DSP TCU
SN Slot No. LTE RMV TCU
TCU
BTS3900, BTS3900
Manager Cabinet WCDMA, BTS3900 ADD TCU
MCN No. LTE LST TCU
TCU
BTS3900, BTS3900
Manager Subrack WCDMA, BTS3900 ADD TCU
MSRN No. LTE LST TCU
TCU
BTS3900, BTS3900 ADD TCU

MPN Manager Port No. LTE LST TCU
TCU

ADDR Address LTE LST TCU
TCU

Temperature Alarm WCDMA, BTS3900 MOD TCU
TLTHD Lower Threshold LTE LST TCU
TCU

Temperature Alarm WCDMA, BTS3900 MOD TCU
TUTHD Upper Threshold LTE LST TCU
TCU

Special Boolean WCDMA, BTS3900 MOD TCU
SBAF Alarm Flag LTE LST TCU
BTS3900, BTS3900
TCU WCDMA, BTS3900
DeviceType Device Type LTE DSP TCU
TCU
BTS3900, BTS3900
WCDMA, BTS3900
TempIn Temperature In LTE DSP TCU
TCU BTS3900, BTS3900

WCDMA, BTS3900
TempOut Temperature Out LTE DSP TCU
TCU
BTS3900, BTS3900
WCDMA, BTS3900
TempInner Temperature Inner LTE DSP TCU

Inner Cycle Fan WCDMA, BTS3900
InCycleSpeedRate Average Speed LTE DSP TCU

OutCycleSpeedRat Outer Cycle Fan WCDMA, BTS3900
e Average Speed LTE DSP TCU
TCU
BTS3900, BTS3900
WCDMA, BTS3900
Power Power LTE DSP TCU
BTS3900, BTS3900
TCU WCDMA, BTS3900
SoftwareVersion Software Version LTE DSP TCU
BTS3900, BTS3900
TCU WCDMA, BTS3900
PCBVersion PCB Version LTE DSP TCU

WCDMA, BTS3900
EPLDVersion EPLD Version LTE DSP TCU

WCDMA, BTS3900
SoftwareBuildTime Software Build Time LTE DSP TCU
BTS3900, BTS3900
TCU WCDMA, BTS3900
VersionDescription Version Description LTE DSP TCU
TCU
BTS3900, BTS3900
WCDMA, BTS3900
Manufacturer Manufacturer LTE DSP TCU
TCU
ADD TCU
BTS3900, BTS3900 MOD TCU
Temperature WCDMA, BTS3900 DSP TCU
TCMODE Control Mode LTE LST TCU
TCU
BTS3900, BTS3900
WCDMA, BTS3900
TCU
BTS3900, BTS3900
WCDMA, BTS3900
TCU
BTS3900, BTS3900
WCDMA, BTS3900
TCU
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
TCU WCDMA, BTS3900 DSP
DSP
BRDMFRINFO
TCU BTS3900, BTS3900 DSP CABMFRINFO
WCDMA, BTS3900 DSP
DSP
TCU BRDMFRINFO
WCDMA, BTS3900 DSP
TCU BTS3900, BTS3900 DSP

TCU BTS3900, BTS3900 DSP

BTS3900, BTS3900
TCU
BTS3900, BTS3900
WCDMA, BTS3900
TCU
BTS3900, BTS3900
WCDMA, BTS3900
TCU
BTS3900, BTS3900
WCDMA, BTS3900
TCU
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
HTCDPA BTS3900, BTS3900

WCDMA, BTS3900 LST HTCDPA
CN Cabinet No. LTE MOD HTCDPA

SRN Subrack No. LTE MOD HTCDPA

SN Slot No. LTE MOD HTCDPA
HTCDPA
BTS3900, BTS3900
Low Temperature WCDMA, BTS3900 MOD HTCDPA
LTCP Critical Point LTE LST HTCDPA
HTCDPA
BTS3900, BTS3900
High Temperature WCDMA, BTS3900 MOD HTCDPA
HTCP Critical Point LTE LST HTCDPA

Temperature Limit WCDMA, BTS3900 MOD HTCDPA
TLT at Air Outlet LTE LST HTCDPA

WCDMA, BTS3900 MOD HTCDPA
DBD Dead Band LTE LST HTCDPA
HTCDPA
Normal BTS3900, BTS3900
Temperature Delta WCDMA, BTS3900 MOD HTCDPA
NTDI Tin LTE LST HTCDPA
HTCDPA
Normal BTS3900, BTS3900
Temperature Delta WCDMA, BTS3900 MOD HTCDPA
NTDO Tout LTE LST HTCDPA
HTCDPA
BTS3900, BTS3900
High Temperature WCDMA, BTS3900 MOD HTCDPA
HTDO Delta Tout LTE LST HTCDPA
ADD PMU
CLR PMUALM
DSP PMU
PMU LST PMU
BTS3900, BTS3900 MOD PMU
WCDMA, BTS3900 RMV PMU
CN Cabinet No. LTE RST PMUPWR
ADD PMU
CLR PMUALM
DSP PMU
PMU LST PMU
SRN Subrack No. LTE RST PMUPWR
ADD PMU
CLR PMUALM
DSP PMU
PMU LST PMU
SN Slot No. LTE RST PMUPWR
PMU
BTS3900, BTS3900
Manager Cabinet WCDMA, BTS3900 ADD PMU
MCN No. LTE LST PMU
PMU
BTS3900, BTS3900
Manager Subrack WCDMA, BTS3900 ADD PMU
MSRN No. LTE LST PMU
PMU
BTS3900, BTS3900 ADD PMU

WCDMA, BTS3900 MOD PMU
MPN Manager Port No. LTE LST PMU
PMU

ADDR Address LTE LST PMU
PMU

PTYPE Power System Type LTE LST PMU
PMU

AC Voltage Alarm WCDMA, BTS3900 MOD PMU
ACVLTHD Lower Threshold LTE LST PMU
PMU

AC Voltage Alarm WCDMA, BTS3900 MOD PMU
ACVUTHD Upper Threshold LTE LST PMU
PMU

DC Voltage Alarm WCDMA, BTS3900 MOD PMU
DCVLTHD Lower Threshold LTE LST PMU
PMU

DC Voltage Alarm WCDMA, BTS3900 MOD PMU
DCVUTHD Upper Threshold LTE LST PMU
PMU

Load Shutdown WCDMA, BTS3900 MOD PMU
LSDF Flag LTE LST PMU
PMU

Load Shutdown WCDMA, BTS3900 MOD PMU
LSDV Voltage LTE LST PMU
PMU
Cabinet BTS3900, BTS3900 ADD PMU

Temperature Alarm WCDMA, BTS3900 MOD PMU
ATLTHD Lower Threshold LTE LST PMU
PMU
Cabinet BTS3900, BTS3900 ADD PMU

Temperature Alarm WCDMA, BTS3900 MOD PMU
ATUTHD Upper Threshold LTE LST PMU
PMU
Cabinet Humidity BTS3900, BTS3900 ADD PMU

Alarm Lower WCDMA, BTS3900 MOD PMU
AHLTHD Threshold LTE LST PMU
PMU
Cabinet Humidity BTS3900, BTS3900 ADD PMU

Alarm Upper WCDMA, BTS3900 MOD PMU
AHUTHD Threshold LTE LST PMU
PMU

Special Analog WCDMA, BTS3900 MOD PMU
SAAF Alarm Flag LTE LST PMU
PMU

Special Boolean WCDMA, BTS3900 MOD PMU
SBAF Alarm Flag LTE LST PMU
PMU BTS3900, BTS3900
WCDMA, BTS3900
AcVol AC Voltage LTE DSP PMU
BTS3900, BTS3900
PMU WCDMA, BTS3900
DcVol Busbar Voltage LTE DSP PMU
PMU
BTS3900, BTS3900
WCDMA, BTS3900
LoadCurrent Load Total Current LTE DSP PMU
PMU
BTS3900, BTS3900
WCDMA, BTS3900
LoadTemp Temperature LTE DSP PMU
PMU
BTS3900, BTS3900
WCDMA, BTS3900
Humidity Cabinet Humidity LTE DSP PMU
PMU
BTS3900, BTS3900
Secondary Load WCDMA, BTS3900
ScdLoadPwrState Power State LTE DSP PMU
PMU
BTS3900, BTS3900
Charging/Dischargi WCDMA, BTS3900
BatChargeState ng State LTE DSP BATTERY

WCDMA, BTS3900 DSP BATTERY
BatCurrent Battery Current LTE DSP PMU
PMU
BTS3900, BTS3900
BatCurrentLimitStat Current Limiting WCDMA, BTS3900
e State LTE DSP PMU
PMU
BTS3900, BTS3900
WCDMA, BTS3900
BatPowerState Battery Power State LTE DSP BATTERY
PMU
BTS3900, BTS3900
WCDMA, BTS3900
BatRemainCapacity Remaining Capacity LTE DSP BATTERY
PMU
BTS3900, BTS3900
Battery WCDMA, BTS3900
BatTemp Temperature LTE DSP BATTERY
PMU
BTS3900, BTS3900
WCDMA, BTS3900
BatTestPhase Battery Test Phase LTE DSP BATTERY

PhotovoltaicArrayC Photovoltaic Array WCDMA, BTS3900
urrent Total Current LTE DSP PMU

Diesel Generator WCDMA, BTS3900
DieselCurrent Current LTE DSP PMU
PMU
Auxiliary Battery BTS3900, BTS3900

AuxBatCabinetTem Cabinet WCDMA, BTS3900
p Temperature LTE DSP PMU
BTS3900, BTS3900
PMU WCDMA, BTS3900
SoftwareVersion Software Version LTE DSP PMU
BTS3900, BTS3900
PMU WCDMA, BTS3900
PCBVersion PCB Version LTE DSP PMU

WCDMA, BTS3900
EPLDVersion EPLD Version LTE DSP PMU
BTS3900, BTS3900
PMU WCDMA, BTS3900
SoftwareBuildTime Software Build Time LTE DSP PMU
BTS3900, BTS3900
PMU WCDMA, BTS3900
VersionDescription Version Description LTE DSP PMU
BTS3900, BTS3900
PMU WCDMA, BTS3900
ProduceDate Produce Date LTE DSP PMU
PMU
BTS3900, BTS3900
WCDMA, BTS3900
Manufacturer Manufacturer LTE DSP PMU
PMU PSU Intelligent BTS3900, BTS3900
Shutdown WCDMA, BTS3900
ISCapability Capability LTE DSP PMU

PSU Intelligent WCDMA, BTS3900
ISSwitchState Shutdown Switch LTE DSP PMU

WCDMA, BTS3900
BatRemainTime Remaining Time LTE DSP BATTERY
PMU
Battery BTS3900, BTS3900
BatAccumulatedCh Accumulated WCDMA, BTS3900
argeTime Charge Time LTE DSP BATTERY
PMU
Battery BTS3900, BTS3900
BatAccumulatedSle Accumulated WCDMA, BTS3900
epingTime Sleeping Time LTE DSP BATTERY
PMU Battery Intelligent BTS3900, BTS3900

Management WCDMA, BTS3900
BatImsCapability Capability LTE DSP PMU
PMU
BTS3900, BTS3900
Battery Intelligent WCDMA, BTS3900
BatImsSwitchState Management Mode LTE DSP PMU
PMU
BTS3900, BTS3900
WCDMA, BTS3900
PMU
BTS3900, BTS3900
WCDMA, BTS3900
PMU
BTS3900, BTS3900
WCDMA, BTS3900
PMU
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
PMU WCDMA, BTS3900 DSP
DSP
BRDMFRINFO
PMU BTS3900, BTS3900 DSP CABMFRINFO
WCDMA, BTS3900 DSP
DSP
PMU BRDMFRINFO
WCDMA, BTS3900 DSP
PMU BTS3900, BTS3900 DSP

PMU BTS3900, BTS3900 DSP

BTS3900, BTS3900
PMU
BTS3900, BTS3900
WCDMA, BTS3900
PMU
BTS3900, BTS3900
WCDMA, BTS3900
PMU
BTS3900, BTS3900
WCDMA, BTS3900
PMU
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
ADD DIESELGEN
DSP DIESELGEN
LST DIESELGEN
MOD DIESELGEN
DIESELGEN RMV DIESELGEN
STP
BTS3900, BTS3900 DIESELGENTST
WCDMA, BTS3900 STR
CN Cabinet No. LTE DIESELGENTST
ADD DIESELGEN
DSP DIESELGEN
LST DIESELGEN
MOD DIESELGEN
STP
WCDMA, BTS3900 STR
SRN Subrack No. LTE DIESELGENTST
ADD DIESELGEN
DSP DIESELGEN
LST DIESELGEN
MOD DIESELGEN
STP
WCDMA, BTS3900 STR
SN Slot No. LTE DIESELGENTST
DIESELGEN
BTS3900, BTS3900 ADD DIESELGEN

Intelligent Control WCDMA, BTS3900 MOD DIESELGEN
ICF Flag LTE LST DIESELGEN
DIESELGEN
BTS3900, BTS3900 ADD DIESELGEN

WCDMA, BTS3900 MOD DIESELGEN
POWER Rated Power LTE LST DIESELGEN
DIESELGEN BTS3900, BTS3900

WCDMA, BTS3900
OL Oil Level LTE DSP DIESELGEN
BTS3900, BTS3900
DIESELGEN Diesel Generator WCDMA, BTS3900
DGC Current LTE DSP DIESELGEN
BTS3900, BTS3900
DIESELGEN WCDMA, BTS3900
TRT Total Running Time LTE DSP DIESELGEN
ADD BATTERY
DSP BATINDT
DSP BATTERY
BATTERY LST BATTERY
BTS3900, BTS3900 MOD BATINDT
WCDMA, BTS3900 MOD BATTERY
CN Cabinet No. LTE RMV BATTERY
ADD BATTERY
DSP BATINDT
DSP BATTERY
BATTERY LST BATTERY
SRN Subrack No. LTE RMV BATTERY
ADD BATTERY
DSP BATINDT
DSP BATTERY
BATTERY LST BATTERY
SN Slot No. LTE RMV BATTERY
BATTERY
BTS3900, BTS3900 ADD BATTERY

INSTALLTYPE Installation Type LTE LST BATTERY
BATTERY

Boost-Charging WCDMA, BTS3900 MOD BATTERY
BCD Duration LTE LST BATTERY
BATTERY

Boost-Charging WCDMA, BTS3900 MOD BATTERY
BCV Voltage LTE LST BATTERY
BATTERY

BC1 Battery 1 Capacity LTE LST BATTERY
BATTERY

Battery Current WCDMA, BTS3900 MOD BATTERY
BCLC Limiting Coefficient LTE LST BATTERY
BATTERY

Float-Charging WCDMA, BTS3900 MOD BATTERY
FCV Voltage LTE LST BATTERY
BATTERY

High Temperature WCDMA, BTS3900 MOD BATTERY
HTSDF Shutdown Flag LTE LST BATTERY
BATTERY

Shutdown WCDMA, BTS3900 MOD BATTERY
SDT Temperature LTE LST BATTERY
BATTERY

Low Voltage WCDMA, BTS3900 MOD BATTERY
LVSDF Shutdown Flag LTE LST BATTERY
BATTERY

SDV Shutdown Voltage LTE LST BATTERY
BATTERY
Temperature BTS3900, BTS3900 ADD BATTERY

Compensation WCDMA, BTS3900 MOD BATTERY
TCC Coefficient LTE LST BATTERY
BATTERY

Temperature Alarm WCDMA, BTS3900 MOD BATTERY
TLTHD Lower Threshold LTE LST BATTERY
BATTERY

Temperature Alarm WCDMA, BTS3900 MOD BATTERY
TUTHD Upper Threshold LTE LST BATTERY
ADD BATTERY
BATTERY BTS3900, BTS3900 MOD BATTERY
BN Battery Number LTE LST BATTERY
ADD BATTERY
BATTERY BTS3900, BTS3900 MOD BATTERY
BTYPE Battery Type LTE LST BATTERY
BATTERY BTS3900, BTS3900

WCDMA, BTS3900
PCT Power Cut Times LTE DSP BATTERY

Charge Times In WCDMA, BTS3900
CTHALF Half an Hour LTE DSP BATTERY
BATTERY
BTS3900, BTS3900
Charge Times In 1 WCDMA, BTS3900
CT1H Hour LTE DSP BATTERY
BATTERY
BTS3900, BTS3900
CT2H Hours LTE DSP BATTERY
BATTERY
BTS3900, BTS3900
BATTERY
BTS3900, BTS3900
BATTERY
BTS3900, BTS3900
BATTERY
BTS3900, BTS3900
BATTERY
BTS3900, BTS3900
BATTERY
BTS3900, BTS3900

Charge Times In WCDMA, BTS3900
CT8UH More than 8 Hours LTE DSP BATTERY

Discharge Times In WCDMA, BTS3900
DCTHALF Half an Hour LTE DSP BATTERY
BATTERY
BTS3900, BTS3900
DCT1 1 Hour LTE DSP BATTERY
BATTERY
BTS3900, BTS3900
DCT2 2 Hours LTE DSP BATTERY
BATTERY
BTS3900, BTS3900
BATTERY
BTS3900, BTS3900
BATTERY
BTS3900, BTS3900
BATTERY
BTS3900, BTS3900
BATTERY
BTS3900, BTS3900
BATTERY
BTS3900, BTS3900

DCTU8 More than 8 Hours LTE DSP BATTERY
BATTERY
BTS3900, BTS3900
WCDMA, BTS3900 MOD BATINDT
DATE Installation Date LTE DSP BATINDT
BATTERY

BC2 Battery 2 Capacity LTE LST BATTERY
DSP BATTR
LST BATCTPA
BATCTPA BTS3900, BTS3900 MOD BATCTPA
WCDMA, BTS3900 STP BATTST
CN Cabinet No. LTE STR BATTST
DSP BATTR
LST BATCTPA
SRN Subrack No. LTE STR BATTST
DSP BATTR
LST BATCTPA
SN Slot No. LTE STR BATTST
BATCTPA
BTS3900, BTS3900
0.05C10 Discharge WCDMA, BTS3900 MOD BATCTPA
DSCHGT0 Time LTE LST BATCTPA
BATCTPA
BTS3900, BTS3900
BATCTPA
BTS3900, BTS3900
BATCTPA
BTS3900, BTS3900
BATCTPA
BTS3900, BTS3900
BATCTPA
BTS3900, BTS3900
BATCTPA
BTS3900, BTS3900
BATCTPA
BTS3900, BTS3900
BATCTPA
BTS3900, BTS3900
BATCTPA
BTS3900, BTS3900
BATCTPA
BTS3900, BTS3900
Battery Charge WCDMA, BTS3900 MOD BATCTPA
EFF Efficiency LTE LST BATCTPA
BATCTPA BTS3900, BTS3900

Discharge Test End WCDMA, BTS3900 MOD BATCTPA
ENDV Voltage LTE LST BATCTPA

WCDMA, BTS3900 MOD BATCTPA
BATNUM Battery Number LTE LST BATCTPA

Discharge Test WCDMA, BTS3900 MOD BATCTPA
DSTML Time Limit LTE LST BATCTPA
BATCTPA
BTS3900, BTS3900
Simple Discharge WCDMA, BTS3900 MOD BATCTPA
SDSTML Test Time Limit LTE LST BATCTPA

Simple Discharge WCDMA, BTS3900 MOD BATCTPA
SDSEV Test End Voltage LTE LST BATCTPA
BATCTPA
BTS3900, BTS3900
Automatic Test WCDMA, BTS3900 MOD BATCTPA
ATMODE Mode LTE LST BATCTPA
BATCTPA
BTS3900, BTS3900
Timing Discharge WCDMA, BTS3900 MOD BATCTPA
TDSTM Test Time LTE LST BATCTPA
BATCTPA
BTS3900, BTS3900
Delayed Discharge WCDMA, BTS3900 MOD BATCTPA
DDSTM Test Time LTE LST BATCTPA
BATCTPA
BTS3900, BTS3900
WCDMA, BTS3900
TstEffi Battery Efficency LTE DSP BATTR

Discharge Last WCDMA, BTS3900
TstDischrLstTime Time LTE DSP BATTR

Discharge End WCDMA, BTS3900
TstDischrEndVol Voltage LTE DSP BATTR

Discharge Average WCDMA, BTS3900
TstDischrCurr Current LTE DSP BATTR
BATCTPA
BTS3900, BTS3900
WCDMA, BTS3900
TstDischrAh Discharge AH LTE DSP BATTR
BATCTPA
BTS3900, BTS3900
Battery WCDMA, BTS3900
TstBatTemp Temperature LTE DSP BATTR
ADD PSU
PSU BTS3900, BTS3900 DSP PSU
WCDMA, BTS3900 LST PSU
CN Cabinet No. LTE RMV PSU
ADD PSU
PSU BTS3900, BTS3900 DSP PSU
SRN Subrack No. LTE RMV PSU
PSU
ADD PSU
BTS3900, BTS3900 DSP PSU
SN Slot No. LTE RMV PSU
PSU
BTS3900, BTS3900
WCDMA, BTS3900
RunningStatus Running Status LTE DSP PSU
BTS3900, BTS3900
PSU WCDMA, BTS3900
ProduceDate Produce Date LTE DSP PSU
PSU
BTS3900, BTS3900
WCDMA, BTS3900
Manufacturer Manufacturer LTE DSP PSU
BTS3900, BTS3900
PSU WCDMA, BTS3900
PCBVersion PCB Version LTE DSP PSU
PSU BTS3900, BTS3900
WCDMA, BTS3900
EPLDVersion EPLD Version LTE DSP PSU
PSU BTS3900, BTS3900

WCDMA, BTS3900
SoftwareBuildTime Software Build Time LTE DSP PSU
PSU
BTS3900, BTS3900
WCDMA, BTS3900
PSU
BTS3900, BTS3900
WCDMA, BTS3900
PSU
BTS3900, BTS3900
WCDMA, BTS3900
PSU
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
PSU WCDMA, BTS3900 DSP
DSP
BRDMFRINFO
PSU BTS3900, BTS3900 DSP CABMFRINFO
WCDMA, BTS3900 DSP
DSP
PSU BRDMFRINFO
WCDMA, BTS3900 DSP
PSU BTS3900, BTS3900 DSP

PSU BTS3900, BTS3900 DSP

BTS3900, BTS3900
PSU
BTS3900, BTS3900
WCDMA, BTS3900
PSU
BTS3900, BTS3900
WCDMA, BTS3900
PSU
BTS3900, BTS3900
WCDMA, BTS3900
PSU
BTS3900, BTS3900
WCDMA, BTS3900
PSU WCDMA, BTS3900 HWTSTRESULT
SoftVer Software Version LTE DSP PSU
BTS3900, BTS3900
BTS3900, BTS3900
OUTPORT BTS3900, BTS3900

WCDMA, BTS3900 LST OUTPORT
CN Cabinet No. LTE SET OUTPORT

SRN Subrack No. LTE SET OUTPORT

SN Slot No. LTE SET OUTPORT
BTS3900, BTS3900
OUTPORT WCDMA, BTS3900 LST OUTPORT
PN Port No. LTE SET OUTPORT

WCDMA, BTS3900 SET OUTPORT
NAME Port Name LTE LST OUTPORT

WCDMA, BTS3900 SET OUTPORT
SW Port Switch LTE LST OUTPORT
ALMPORT BTS3900, BTS3900

WCDMA, BTS3900 LST ALMPORT
CN Cabinet No. LTE SET ALMPORT

SRN Subrack No. LTE SET ALMPORT

SN Slot No. LTE SET ALMPORT
BTS3900, BTS3900
ALMPORT WCDMA, BTS3900 LST ALMPORT
PN Port No. LTE SET ALMPORT
ALMPORT
BTS3900, BTS3900
WCDMA, BTS3900 SET ALMPORT
SW Switch LTE LST ALMPORT
ALMPORT
BTS3900, BTS3900
AID Alarm ID LTE SET ALMPORT
ALMPORT
BTS3900, BTS3900
PT Port Type LTE LST ALMPORT
ALMPORT
BTS3900, BTS3900
AVOL Alarm Voltage LTE LST ALMPORT
ALMPORT
BTS3900, BTS3900
UL Alarm Upper Limit LTE LST ALMPORT
ALMPORT
BTS3900, BTS3900
LL Alarm Lower Limit LTE LST ALMPORT
ALMPORT
BTS3900, BTS3900
ST Sensor Type LTE LST ALMPORT
ALMPORT
Sensor BTS3900, BTS3900

Measurement WCDMA, BTS3900 SET ALMPORT
SMUL Upper Limit LTE LST ALMPORT
ALMPORT
Sensor BTS3900, BTS3900

Measurement WCDMA, BTS3900 SET ALMPORT
SMLL Lower Limit LTE LST ALMPORT
ALMPORT
BTS3900, BTS3900
Sensor Output WCDMA, BTS3900 SET ALMPORT
SOUL Upper Limit LTE LST ALMPORT
ALMPORT
BTS3900, BTS3900
Sensor Output WCDMA, BTS3900 SET ALMPORT
SOLL Lower Limit LTE LST ALMPORT
SSL
BTS3900, BTS3900
WCDMA, BTS3900 SET CONNTYPE
CONNTYPE Connection Type LTE LST SSLCONF
SSL

Authentication WCDMA, BTS3900 SSLAUTHMODE
AUTHMODE Mode LTE LST SSLCONF
SSL BTS3900, BTS3900

Login WCDMA, BTS3900 SET AUTHPOLICY
AUTHPOLICY Authentication Type LTE LST AUTHPOLICY
WEBLMT
SET
WEBLOGINPOLIC
Y
WebLMT Login WCDMA, BTS3900 WEBLOGINPOLIC
POLICY Policy LTE Y
BTS3900, BTS3900
APPLICATION WCDMA, BTS3900 RST APP
AID Application ID LTE DSP APP
BTS3900, BTS3900
APPLICATION WCDMA, BTS3900 DSP APP
AT Application Type LTE LST VER
BTS3900, BTS3900
APPLICATION WCDMA, BTS3900
AN Application Name LTE DSP APP
APPLICATION BTS3900, BTS3900

WCDMA, BTS3900
AS Application State LTE DSP APP
BTS3900, BTS3900
APPLICATION WCDMA, BTS3900
AV Software Version LTE DSP APP
AAMU
BTS3900, BTS3900
WCDMA, BTS3900
AAMU
BTS3900, BTS3900
WCDMA, BTS3900
AAMU
BTS3900, BTS3900
WCDMA, BTS3900
AAMU BTS3900, BTS3900

WCDMA, BTS3900 ADD AAS
TP RRU Topo Position LTE LST AAS
AAMU BTS3900, BTS3900

RCN RRU Chain No. LTE LST AAS
AAMU
BTS3900, BTS3900
PS AAS Position LTE LST AAS
ADD AARU
DSP AARU
AARU LST AARU
BTS3900, BTS3900 MOD AARU
WCDMA, BTS3900 RMV AARU
CN Cabinet No. LTE STR ANTTEST
ADD AARU
DSP AARU
AARU LST AARU
SRN Subrack No. LTE STR ANTTEST
ADD AARU
DSP AARU
AARU LST AARU
SN Slot No. LTE STR ANTTEST
AARU BTS3900, BTS3900 ADD AARU

WCDMA, BTS3900 MOD AARU
AN AARU Name LTE LST AARU
AARU BTS3900, BTS3900

WCDMA, BTS3900
ADMSTATE Administrative state LTE LST AARU
AARU
BTS3900, BTS3900
Frequency Min WCDMA, BTS3900
FMBWH Bandwidth LTE None
AARU
BTS3900, BTS3900 ADD AARU

Intermediate WCDMA, BTS3900 MOD AARU
IFOFFSET Frequency Offset LTE LST AARU
ADD AARU
AARU BTS3900, BTS3900 MOD AARU
Number of RX WCDMA, BTS3900 DSP AARU
RXNUM channels LTE LST AARU
ADD AARU
AARU BTS3900, BTS3900 MOD AARU
Number of TX WCDMA, BTS3900 DSP AARU
TXNUM channels LTE LST AARU
AARU
Logical Switch of WCDMA, BTS3900 DSP AARU
TXSW TX Channel LTE LST AARU
AARU
BTS3900, BTS3900 ADD AARU
AARU Work WCDMA, BTS3900 MOD AARU
RS Standard LTE LST AARU
AARU BTS3900, BTS3900

WCDMA, BTS3900
VRETNO VRET No. LTE ADD AARU
AARU
BTS3900, BTS3900
WCDMA, BTS3900
MaxBeamAzimuth Max Beam Azimuth LTE DSP AARU
AARU
BTS3900, BTS3900
WCDMA, BTS3900
MinBeamAzimuth Min Beam Azimuth LTE DSP AARU
AARU
BTS3900, BTS3900
WCDMA, BTS3900
MaxBeamWidth Max Beam Width LTE DSP AARU
AARU
BTS3900, BTS3900
WCDMA, BTS3900
MinBeamWidth Min Beam Width LTE DSP AARU
AARU
BTS3900, BTS3900
WCDMA, BTS3900
MaxTilt Max Tilt LTE DSP AARU
AARU
BTS3900, BTS3900
WCDMA, BTS3900
MinTilt Min Tilt LTE DSP AARU
AARU
BTS3900, BTS3900
MaxCarrierTiltDiffer Max Tilt Difference WCDMA, BTS3900
ence Between Carriers LTE DSP AARU
ADD AAS
DSP AAS
AAS BTS3900, BTS3900 LST AAS
WCDMA, BTS3900 MOD AAS
CN Cabinet No. LTE RMV AAS
ADD AAS
DSP AAS
AAS BTS3900, BTS3900 LST AAS
SRN Subrack No. LTE RMV AAS
AAS BTS3900, BTS3900 ADD AAS

AN AAS Name LTE LST AAS
AAS
BTS3900, BTS3900
WCDMA, BTS3900
AccessDirection Access Direction LTE DSP AAS
ADD RHUB
DSP
FARPWRINFO
RHUB DSP RHUB
BTS3900, BTS3900 LST RHUB
WCDMA, BTS3900 MOD RHUB
CN Cabinet No. LTE RMV RHUB
ADD RHUB
DSP
FARPWRINFO
RHUB DSP RHUB
SRN Subrack No. LTE RMV RHUB
ADD RHUB
DSP
FARPWRINFO
RHUB DSP RHUB
SN Slot No. LTE RMV RHUB
RHUB BTS3900, BTS3900

WCDMA, BTS3900 ADD RHUB
RCN RRU Chain No. LTE LST RHUB
RHUB
BTS3900, BTS3900
WCDMA, BTS3900 ADD RHUB
PS RHUB Position LTE LST RHUB
RHUB BTS3900, BTS3900 ADD RHUB

RN RHUB Name LTE LST RHUB
RHUB
BTS3900, BTS3900
WCDMA, BTS3900
RHUB
BTS3900, BTS3900
WCDMA, BTS3900
RHUB
BTS3900, BTS3900
WCDMA, BTS3900
RHUB
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
RHUB WCDMA, BTS3900 DSP
DSP
BRDMFRINFO
RHUB BTS3900, BTS3900 DSP CABMFRINFO
WCDMA, BTS3900 DSP
DSP
RHUB BRDMFRINFO
WCDMA, BTS3900 DSP
RHUB BTS3900, BTS3900 DSP

RHUB BTS3900, BTS3900 DSP

BTS3900, BTS3900
RHUB
BTS3900, BTS3900
WCDMA, BTS3900
RHUB
BTS3900, BTS3900
WCDMA, BTS3900
RHUB
BTS3900, BTS3900
WCDMA, BTS3900
RHUB
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
RE BTS3900, BTS3900
WCDMA, BTS3900
ADMSTATE Administrative state LTE LST RRU
RE
BTS3900, BTS3900 ADD RRU

VSWR alarm post- WCDMA, BTS3900 MOD RRU
ALMPROCSW processing switch LTE LST RRU
RE
VSWR alarm post- BTS3900, BTS3900 ADD RRU

ALMPROCTHRHL processing WCDMA, BTS3900 MOD RRU
D threshold LTE LST RRU
RE

VSWR alarm WCDMA, BTS3900 MOD RRU
ALMTHRHLD threshold LTE LST RRU
RE
BTS3900, BTS3900
WCDMA, BTS3900 ADD RRU
PS RRU Position LTE LST RRU
RE
BTS3900, BTS3900
RCN RRU Chain No. LTE LST RRU
RE
ADD RRU
DSP
BTS3900, BTS3900 RRUCHAINPHYTO
WCDMA, BTS3900 PO
TP RRU Topo Position LTE LST RRU
RE

RF Unit Working WCDMA, BTS3900 MOD RRU
RS Mode LTE LST RRU
RE
ADD RRU
BTS3900, BTS3900 MOD RRU
Number of RX WCDMA, BTS3900 DSP RRU
RXNUM channels LTE LST RRU
RE
ADD RRU
Number of TX WCDMA, BTS3900 DSP RRU
TXNUM channels LTE LST RRU
RE BTS3900, BTS3900
CarrierNumPerRxBr Number of carriers WCDMA, BTS3900 DSP AARU
anch on the RX channel LTE DSP RRU
BTS3900, BTS3900
RE CarrierNumPerTxBr Number of carriers WCDMA, BTS3900 DSP AARU
anch on the TX channel LTE DSP RRU
RE Maximum output BTS3900, BTS3900

MaxOutPwrPerBran power on the TX WCDMA, BTS3900 DSP AARU
ch channel LTE DSP RRU
BTS3900, BTS3900
RE WCDMA, BTS3900 DSP AARU
UlBranchGain UL channel gain LTE DSP RRU
RE BTS3900, BTS3900 DSP

Level Trunk Level LTE PO
RE
Physical RRU WCDMA, BTS3900 RRUCHAINPHYTO
DeviceSerialNo device serial No. LTE PO
RE

RRU standard WCDMA, BTS3900 RRUCHAINPHYTO
RatType capability LTE PO
RE
BTS3900, BTS3900
WCDMA, BTS3900 DSP RHUB
AccessDirection Access Direction LTE DSP RRU
RE

WCDMA, BTS3900 MOD RRU
IFOFFSET IfOffset LTE LST RRU
RE

RFDS RF Desensitivity LTE LST RRU
RE BTS3900, BTS3900
WCDMA, BTS3900 DSP AARU
ULSupporteFeature UL Support Feature LTE DSP RRU
RE
BTS3900, BTS3900
Frequency Min WCDMA, BTS3900 SET FREQBWH
FMBWH Bandwidth LTE LST FREQBWH
RE
ADD RRU
Low Current Protect WCDMA, BTS3900 DSP RRU
LCPSW Switch LTE LST RRU
RE
ADD RRU
WCDMA, BTS3900 DSP RRU
FLAG ALD Reuse Flag LTE LST RRU
RE
BTS3900, BTS3900
WCDMA, BTS3900
ANTID Antenna ID LTE DSP RRU
RE
BTS3900, BTS3900
WCDMA, BTS3900
INSTALLPOS Antenna Location LTE DSP RRU
RE

RUSPEC RU Specification LTE LST RRU
RE
BTS3900, BTS3900 ADD RFCONNGRP

Cabinet No. of WCDMA, BTS3900 RMV RFCONNGRP
RFCONNCN2 RRU2 LTE LST RFCONNGRP
RE

WCDMA, BTS3900 RMV RFCONNGRP
RFCONNSN2 Slot No. of RRU2 LTE LST RFCONNGRP
RE

Subrack No. of WCDMA, BTS3900 RMV RFCONNGRP
RFCONNSRN2 RRU2 LTE LST RFCONNGRP
RE

RFCONNTYPE RF Connect Type LTE LST RFCONNGRP
RE
PA Efficiency BTS3900, BTS3900 ADD RRU

Improvement WCDMA, BTS3900 MOD RRU
PAEFFSWITCH Switch LTE LST RRU
RE PA Efficiency BTS3900, BTS3900
Improvement WCDMA, BTS3900
PAEFFCAP Capability LTE DSP RRU
RE
BTS3900, BTS3900
WCDMA, BTS3900
RE
BTS3900, BTS3900
WCDMA, BTS3900
RE
BTS3900, BTS3900
WCDMA, BTS3900
RE
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
RE WCDMA, BTS3900 DSP
DSP
BRDMFRINFO
RE BTS3900, BTS3900 DSP CABMFRINFO
WCDMA, BTS3900 DSP
DSP
RE BRDMFRINFO
WCDMA, BTS3900 DSP


BTS3900, BTS3900
RE
BTS3900, BTS3900
WCDMA, BTS3900
RE
BTS3900, BTS3900
WCDMA, BTS3900
RE
BTS3900, BTS3900
WCDMA, BTS3900
RE
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
RFU
BTS3900, BTS3900
WCDMA, BTS3900
RFU
BTS3900, BTS3900
WCDMA, BTS3900
RFU
BTS3900, BTS3900
WCDMA, BTS3900
RFU
BTS3900, BTS3900
WCDMA, BTS3900
RT RRU type LTE None
RFU BTS3900, BTS3900

WCDMA, BTS3900
RFU
BTS3900, BTS3900
WCDMA, BTS3900
RFU
BTS3900, BTS3900
WCDMA, BTS3900
RFU
BTS3900, BTS3900
WCDMA, BTS3900
RFU
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
RFU WCDMA, BTS3900 DSP
DSP
BRDMFRINFO
RFU BTS3900, BTS3900 DSP CABMFRINFO
WCDMA, BTS3900 DSP
DSP
RFU BRDMFRINFO
WCDMA, BTS3900 DSP
RFU BTS3900, BTS3900 DSP


BTS3900, BTS3900
RFU
BTS3900, BTS3900
WCDMA, BTS3900
RFU
BTS3900, BTS3900
WCDMA, BTS3900
RFU
BTS3900, BTS3900
WCDMA, BTS3900
RFU
BTS3900, BTS3900
WCDMA, BTS3900
RFU

RFU

RFU

RFU
BTS3900, BTS3900
RFU
BTS3900, BTS3900
RFU
ADD RRU
DSP
WCDMA, BTS3900 PO
RFU

RS Mode LTE LST RRU
RFU
ADD RRU
RFU
ADD RRU

BTS3900, BTS3900
RFU CarrierNumPerTxBr Number of carriers WCDMA, BTS3900 DSP AARU
RFU Maximum output BTS3900, BTS3900

BTS3900, BTS3900
RFU WCDMA, BTS3900 DSP AARU

RFU
RFU

RFU
BTS3900, BTS3900
RFU

RFU


RFU
BTS3900, BTS3900
RFU
ADD RRU
RFU
ADD RRU
RFU
BTS3900, BTS3900
WCDMA, BTS3900
RFU
BTS3900, BTS3900
WCDMA, BTS3900
RFU

RFU

RFU

RFU

RFU

BTS3900, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
RFU

RFU PA Efficiency BTS3900, BTS3900

RRU
BTS3900, BTS3900 DSP RRUCLKSRC

WCDMA, BTS3900 SET RRUCLKSRC
CN Cabinet No. LTE TST LOPRRU
RRU

SRN Subrack No. LTE TST LOPRRU
RRU

SN Slot No. LTE TST LOPRRU
RRU BTS3900, BTS3900 ADD RRU

RN RRU Name LTE LST RRU
RRU
BTS3900, BTS3900
WCDMA, BTS3900
RT RRU type LTE LST RRU
RRU
Slot Number of the BTS3900, BTS3900
Locked Baseband WCDMA, BTS3900
BLSN Board LTE DSP RRUCLKSRC
RRU
Port Number of the BTS3900, BTS3900
Locked Baseband WCDMA, BTS3900
BLPN Board LTE DSP RRUCLKSRC
RRU BTS3900, BTS3900

Port Number of the WCDMA, BTS3900
RLPN Locked RRU LTE DSP RRUCLKSRC

WCDMA, BTS3900
RRU
BTS3900, BTS3900
WCDMA, BTS3900
RRU
BTS3900, BTS3900
WCDMA, BTS3900
RRU
BTS3900, BTS3900
WCDMA, BTS3900
RRU
BTS3900, BTS3900
WCDMA, BTS3900
BTS3900, BTS3900
RRU WCDMA, BTS3900 DSP
DSP
BRDMFRINFO
RRU BTS3900, BTS3900 DSP CABMFRINFO
WCDMA, BTS3900 DSP
DSP
RRU BRDMFRINFO
WCDMA, BTS3900 DSP
RRU BTS3900, BTS3900 DSP


BTS3900, BTS3900
RRU
BTS3900, BTS3900
WCDMA, BTS3900
RRU
BTS3900, BTS3900
WCDMA, BTS3900
RRU
BTS3900, BTS3900
WCDMA, BTS3900
RRU
BTS3900, BTS3900
WCDMA, BTS3900
RRU

RRU

RRU

RRU
BTS3900, BTS3900
RRU
BTS3900, BTS3900
RRU
ADD RRU
DSP
WCDMA, BTS3900 PO
RRU

RS Mode LTE LST RRU
RRU
ADD RRU
RRU
ADD RRU

BTS3900, BTS3900
RRU CarrierNumPerTxBr Number of carriers WCDMA, BTS3900 DSP AARU
RRU Maximum output BTS3900, BTS3900

BTS3900, BTS3900
RRU WCDMA, BTS3900 DSP AARU

RRU
RRU

RRU
BTS3900, BTS3900
RRU

RRU


RRU
BTS3900, BTS3900
RRU
ADD RRU
RRU
ADD RRU
RRU
BTS3900, BTS3900
WCDMA, BTS3900
RRU
BTS3900, BTS3900
WCDMA, BTS3900
RRU

RRU

RRU

RRU

RRU

BTS3900, BTS3900
BTS3900, BTS3900
BTS3900, BTS3900
RRU

RRU PA Efficiency BTS3900, BTS3900

ADD RRUCHAIN
DSP RRUCHAIN
RRUCHAIN BTS3900, BTS3900 LST RRUCHAIN
WCDMA, BTS3900 MOD RRUCHAIN
RCN Chain No. LTE RMV RRUCHAIN
RRUCHAIN
ADD RRUCHAIN
MOD RRUCHAIN
DSP
WCDMA, BTS3900 PO
TT Topo Type LTE LST RRUCHAIN
RRUCHAIN
BTS3900, BTS3900 ADD RRUCHAIN

BM Backup Mode LTE LST RRUCHAIN
RRUCHAIN
ADD RRUCHAIN
MOD RRUCHAIN
DSP
WCDMA, BTS3900 PO
HCN Head Cabinet No. LTE LST RRUCHAIN
RRUCHAIN
ADD RRUCHAIN
MOD RRUCHAIN
DSP
WCDMA, BTS3900 PO
HSRN Head Subrack No. LTE LST RRUCHAIN
RRUCHAIN
ADD RRUCHAIN
MOD RRUCHAIN
DSP
WCDMA, BTS3900 PO
HSN Head Slot No. LTE LST RRUCHAIN
RRUCHAIN
ADD RRUCHAIN
MOD RRUCHAIN
DSP
WCDMA, BTS3900 PO
HPN Head Port No. LTE LST RRUCHAIN
RRUCHAIN
ADD RRUCHAIN
MOD RRUCHAIN
DSP
WCDMA, BTS3900 PO
TCN Tail Cabinet No. LTE LST RRUCHAIN
RRUCHAIN
ADD RRUCHAIN
MOD RRUCHAIN
DSP
WCDMA, BTS3900 PO
TSRN Tail Subrack No. LTE LST RRUCHAIN
RRUCHAIN
ADD RRUCHAIN
MOD RRUCHAIN
DSP
WCDMA, BTS3900 PO
TSN Tail Slot No. LTE LST RRUCHAIN
RRUCHAIN
ADD RRUCHAIN
MOD RRUCHAIN
DSP
WCDMA, BTS3900 PO
TPN Tail Port No. LTE LST RRUCHAIN
RRUCHAIN
BTS3900, BTS3900
BreakPoint WCDMA, BTS3900 MOD RRUCHAIN
BRKPOS1 Position1 LTE LST RRUCHAIN
RRUCHAIN
BTS3900, BTS3900
BreakPoint WCDMA, BTS3900 MOD RRUCHAIN
BRKPOS2 Position2 LTE LST RRUCHAIN
RRUCHAIN

AT Access Type LTE LST RRUCHAIN
RRUCHAIN

CR CPRI Line Rate LTE LST RRUCHAIN
BTS3900, BTS3900
RRUCHAIN WCDMA, BTS3900
ChainLevel Chain Level LTE DSP RRUCHAIN
RRUCHAIN BTS3900, BTS3900

WCDMA, BTS3900
RRUNum RRU Number LTE DSP RRUCHAIN
RXBRANCH
BTS3900, BTS3900 DSP RXBRANCH

WCDMA, BTS3900 LST RXBRANCH
CN Cabinet No. LTE MOD RXBRANCH
RXBRANCH

SRN Subrack No. LTE MOD RXBRANCH
RXBRANCH

SN Slot No. LTE MOD RXBRANCH
RXBRANCH

RXNO RX Channel No. LTE MOD RXBRANCH
RXBRANCH
BTS3900, BTS3900 MOD RXBRANCH

Logical Switch of WCDMA, BTS3900 DSP RXBRANCH
RXSW RX Channel LTE LST RXBRANCH
RXBRANCH

WCDMA, BTS3900 DSP RXBRANCH
ATTEN Attenuation LTE LST RXBRANCH
RXBRANCH
BTS3900, BTS3900
Physical Switch of WCDMA, BTS3900
PhyStatus RX Channel LTE DSP RXBRANCH
RXBRANCH

RTWPINITADJ0 RTWP Initial0 LTE LST RXBRANCH
RXBRANCH BTS3900, BTS3900 MOD RXBRANCH






RXBRANCH
BTS3900, BTS3900
Band 1 Minimum WCDMA, BTS3900
RxMinFreq1 frequency LTE DSP RXBRANCH
RXBRANCH
BTS3900, BTS3900
Band 1 Maximum WCDMA, BTS3900
RxMaxFreq1 frequency LTE DSP RXBRANCH
RXBRANCH
BTS3900, BTS3900
Band 1 UL WCDMA, BTS3900
UlBandwidth1 Bandwidth LTE DSP RXBRANCH
RXBRANCH
BTS3900, BTS3900
RxMinFreq2 frequency LTE DSP RXBRANCH
RXBRANCH
BTS3900, BTS3900
RxMaxFreq2 frequency LTE DSP RXBRANCH
RXBRANCH
BTS3900, BTS3900
Band 2 UL WCDMA, BTS3900
UlBandwidth2 Bandwidth LTE DSP RXBRANCH
TXBRANCH
DSP TXBRANCH
DSP VSWR
LOC RRUTC
LST TXBRANCH
MOD TXBRANCH
STR VSWRTEST
VER TXPOWER
BTS3900, BTS3900 DSP VSWRTEST
WCDMA, BTS3900 STR
CN Cabinet No. LTE CROSFEEDTST
TXBRANCH
DSP TXBRANCH
DSP VSWR
LOC RRUTC
LST TXBRANCH
MOD TXBRANCH
STR VSWRTEST
VER TXPOWER
WCDMA, BTS3900 STR
SRN Subrack No. LTE CROSFEEDTST
TXBRANCH
DSP TXBRANCH
DSP VSWR
LOC RRUTC
LST TXBRANCH
MOD TXBRANCH
STR VSWRTEST
VER TXPOWER
WCDMA, BTS3900 STR
SN Slot No. LTE CROSFEEDTST
DSP TXBRANCH
DSP VSWR
LOC RRUTC
LST TXBRANCH
TXBRANCH MOD TXBRANCH
STR VSWRTEST
BTS3900, BTS3900 VER TXPOWER
WCDMA, BTS3900 STR
TXNO TX Channel No. LTE CROSFEEDTST
TXBRANCH
BTS3900, BTS3900 MOD TXBRANCH

Logical Switch of WCDMA, BTS3900 DSP TXBRANCH
TXSW TX Channel LTE LST TXBRANCH
TXBRANCH
BTS3900, BTS3900 DSP TXBRANCH

WCDMA, BTS3900 DSP VSWR
Vswr VSWR LTE STR VSWRTEST
TXBRANCH
BTS3900, BTS3900
Physical Switch of WCDMA, BTS3900
PhyStatus TX Channel LTE DSP TXBRANCH
TXBRANCH
Maximum Output BTS3900, BTS3900

TXMAXPWRFORD Power of the TX WCDMA, BTS3900
SP Channel LTE DSP TXBRANCH
TXBRANCH Maximum Output BTS3900, BTS3900

Power of TX Unit WCDMA, BTS3900
MaxOutputOneCar (Single Carrier) LTE DSP TXBRANCH
TXBRANCH Maximum Output BTS3900, BTS3900
Power of TX Unit WCDMA, BTS3900
MaxOutputMutiCar (Multiple Carriers) LTE DSP TXBRANCH
TXBRANCH
Hardware Maximum BTS3900, BTS3900

Output Power of the WCDMA, BTS3900
TXHWMAXPWR TX Channel LTE DSP TXBRANCH
TXBRANCH
BTS3900, BTS3900
TxMinFreq1 frequency LTE DSP TXBRANCH
TXBRANCH
BTS3900, BTS3900
TxMaxFreq1 frequency LTE DSP TXBRANCH
TXBRANCH
BTS3900, BTS3900
Band 1 DL WCDMA, BTS3900
DlBandwidth1 Bandwidth LTE DSP TXBRANCH
TXBRANCH
BTS3900, BTS3900
TxMinFreq2 frequency LTE DSP TXBRANCH
TXBRANCH
BTS3900, BTS3900
TxMaxFreq2 frequency LTE DSP TXBRANCH
TXBRANCH
BTS3900, BTS3900
Band 2 DL WCDMA, BTS3900
DlBandwidth2 Bandwidth LTE DSP TXBRANCH
ADD NTPC
MOD NTPC
NTPCP BTS3900, BTS3900 RMV NTPC
IPv4 Address of WCDMA, BTS3900 SET
IP NTP Server LTE MASTERNTPS
NTPCP
BTS3900, BTS3900 ADD NTPC

Synchronization WCDMA, BTS3900 MOD NTPC
SYNCCYCLE Period LTE LST NTPC
NTPCP

WCDMA, BTS3900 MOD NTPC
PORT Port Number LTE LST NTPC
ADD NTPC
MOD NTPC
NTPCP RMV NTPC
MODE IP Mode LTE MASTERNTPS
ADD NTPC
MOD NTPC
NTPCP RMV NTPC
IPv6 Address of BTS3900, BTS3900 SET
IPV6 NTP Server LTE MASTERNTPS
NTPCP
Authentication WCDMA, BTS3900 MOD NTPC
AUTHMODE Mode LTE LST NTPC
NTPCP

WCDMA, BTS3900 MOD NTPC
KEY Authentication Key LTE LST NTPC
NTPCP
Authentication Key WCDMA, BTS3900 MOD NTPC
KEYID Index LTE LST NTPC
NTPCP
BTS3900, BTS3900
WCDMA, BTS3900
MASTERFLAG Master Flag LTE LST NTPC
TZ
BTS3900, BTS3900
WCDMA, BTS3900 SET TZ
ZONET Time Zone LTE LST TZ
TZ BTS3900, BTS3900
DST Tag WCDMA, BTS3900
DST Information LTE SET TZ
TZ
BTS3900, BTS3900
WCDMA, BTS3900
SM DST Start Mode LTE SET TZ
TZ
BTS3900, BTS3900
WCDMA, BTS3900
SMONTH DST Start Month LTE SET TZ
TZ
BTS3900, BTS3900
WCDMA, BTS3900
SDAY DST Start Day LTE SET TZ
TZ BTS3900, BTS3900
DST Start Week WCDMA, BTS3900
SWSEQ Sequence LTE SET TZ
TZ
BTS3900, BTS3900
WCDMA, BTS3900
SWEEK DST Start Weekday LTE SET TZ
TZ
BTS3900, BTS3900
WCDMA, BTS3900
ST DST Start Time LTE SET TZ
TZ
BTS3900, BTS3900
WCDMA, BTS3900
EM DST End Mode LTE SET TZ
TZ
BTS3900, BTS3900
WCDMA, BTS3900
EMONTH DST End Month LTE SET TZ
TZ
BTS3900, BTS3900
WCDMA, BTS3900
EDAY DST End Day LTE SET TZ
TZ BTS3900, BTS3900
DST End Week WCDMA, BTS3900
EWSEQ Sequence LTE SET TZ
TZ
BTS3900, BTS3900
WCDMA, BTS3900
EWEEK DST End Weekday LTE SET TZ
TZ BTS3900, BTS3900
WCDMA, BTS3900
ET DST End Time LTE SET TZ
TZ
BTS3900, BTS3900
WCDMA, BTS3900
TO DST Offset LTE SET TZ
TZ BTS3900, BTS3900
WCDMA, BTS3900
TIMEDIFF Time Difference LTE SET TZ
OMUCURTIME
BTS3900, BTS3900
WCDMA, BTS3900
DATE Date LTE SET TIME
OMUCURTIME
BTS3900, BTS3900
WCDMA, BTS3900
TIME Time LTE SET TIME
OMUCURTIME
BTS3900, BTS3900
WCDMA, BTS3900
DATETIME Time LTE DSP TIME
SET TIMESRC
DSP TIMESRC
TIMESRC LST
BTS3900, BTS3900 LATESTSUCCDAT
WCDMA, BTS3900 E
TIMESRC Time Source LTE LST TIMESRC
TIMESRC
Latest Successful BTS3900, BTS3900 LST

Synchronization WCDMA, BTS3900 LATESTSUCCDAT
DATETIME Time LTE E
FTPCLT
BTS3900, BTS3900
Transport WCDMA, BTS3900 SET FTPSCLT
ENCRYMODE Encrypted Mode LTE LST FTPSCLT
FTPCLT
BTS3900, BTS3900
Support State WCDMA, BTS3900 SET FTPSCLT
SPTSTATEFWL Firewall LTE LST FTPSCLT
FTPCLT
Support SSL BTS3900, BTS3900
Certificate WCDMA, BTS3900 SET FTPSCLT
SSLCERTAUTH Authentication LTE LST FTPSCLT
ADD
FTPSCLTDPORT
MOD
FTPCLTPORT FTPSCLTDPORT
RMV
BTS3900, BTS3900 FTPSCLTDPORT
FTP Server IP WCDMA, BTS3900 LST
SERVERIP Address LTE FTPSCLTDPORT
FTPCLTPORT
ADD
FTPSCLTDPORT
MOD
BTS3900, BTS3900 FTPSCLTDPORT
WCDMA, BTS3900 LST
PORT Destination Port LTE FTPSCLTDPORT
ADD
CNOPERATOREXT
ENDEDQCI
LST
CNOPERATOREXT
CnOperatorExtended ENDEDQCI
MOD
CNOPERATOREXT
ENDEDQCI
RMV
BTS3900, BTS3900 CNOPERATOREXT
CnOperatorId CN Operator ID LTE ENDEDQCI
ADD
CNOPERATOREXT
ENDEDQCI
LST
CNOPERATOREXT
CnOperatorExtended ENDEDQCI
MOD
CNOPERATOREXT
ENDEDQCI
RMV
CN Operator BTS3900, BTS3900 CNOPERATOREXT
ExtendedQci extended QCI LTE ENDEDQCI
ADD
CNOPERATOREXT
ENDEDQCI
MOD
CnOperatorExtended CNOPERATOREXT
ENDEDQCI
Service-based inter- LST
ServiceIrHoCfgGro RAT handover BTS3900, BTS3900 CNOPERATOREXT
upId policy group ID LTE ENDEDQCI
ADD
CNOPERATOREXT
ENDEDQCI
MOD
CnOperatorExtended CNOPERATOREXT
ENDEDQCI
ServiceIfHoCfgGrou Freq handover BTS3900, BTS3900 CNOPERATOREXT
pId policy group ID LTE ENDEDQCI
LST
CNOPERATORHO
CnOperatorHoCfg CFG
MOD
BTS3900, BTS3900 CNOPERATORHO
CnOperatorId CN Operator ID LTE CFG
CnOperatorHoCfg
MOD
CNOPERATORHO
CFG
LST
BTS3900, BTS3900 CNOPERATORHO
FirstRatPri First RAT Priority LTE CFG
CnOperatorHoCfg
MOD
CNOPERATORHO
CFG
LST
Second RAT BTS3900, BTS3900 CNOPERATORHO
SecondRatPri Priority LTE CFG
CnOperatorHoCfg
MOD
CNOPERATORHO
CFG
LTE TDD inter-freq LST
TddIfHoA2ThdRsrp A2 Threshold BTS3900, BTS3900 CNOPERATORHO
Offset RSRP Offset LTE CFG
CnOperatorHoCfg
MOD
CNOPERATORHO
CFG
LTE FDD inter-freq LST
FddIfHoA2ThdRsrp A2 Threshold BTS3900, BTS3900 CNOPERATORHO
Offset RSRP Offset LTE CFG
CnOperatorHoCfg
MOD
CNOPERATORHO
CFG
UTRAN A2 LST
UtranA2ThdRsrpOff Threshold RSRP BTS3900, BTS3900 CNOPERATORHO
set Offset LTE CFG
CnOperatorHoCfg
MOD
CNOPERATORHO
CFG
GERAN A2 LST
GeranA2ThdRsrpOf Threshold RSRP BTS3900, BTS3900 CNOPERATORHO
fset Offset LTE CFG
ADD
CNOPERATORSPI
DCFG
LST
CNOPERATORSPI
CnOperatorSpidCfg DCFG
MOD
CNOPERATORSPI
DCFG
RMV
BTS3900, BTS3900 CNOPERATORSPI
CnOperatorId CN Operator ID LTE DCFG
ADD
CNOPERATORSPI
DCFG
LST
CnOperatorSpidCfg CNOPERATORSPI
DCFG
MOD
CNOPERATORSPI
DCFG
RMV
BTS3900, BTS3900 CNOPERATORSPI
Spid Spid LTE DCFG
ADD
DCFG
MOD
CNOPERATORSPI
DCFG
LST
RAT frequency BTS3900, BTS3900 CNOPERATORSPI
RatFreqPriorityInd priority indication LTE DCFG
ADD
DCFG
MOD
CNOPERATORSPI
DCFG
LST
RatFreqPriorityGrou RAT frequency BTS3900, BTS3900 CNOPERATORSPI
pId priority group ID LTE DCFG
LST
CNOPERATORSTA
CnOperatorStandard NDARDQCI
MOD
BTS3900, BTS3900 CNOPERATORSTA
CnOperatorId CN Operator ID LTE NDARDQCI
CnOperatorStandard
LST
CNOPERATORSTA
NDARDQCI
MOD
QoS Class BTS3900, BTS3900 CNOPERATORSTA
Qci Indication LTE NDARDQCI
MOD
CNOPERATORSTA
ServiceIrHoCfgGro RAT handover BTS3900, BTS3900 CNOPERATORSTA
upId policy group ID LTE NDARDQCI
MOD
CNOPERATORSTA
ServiceIfHoCfgGrou Freq handover BTS3900, BTS3900 CNOPERATORSTA
pId policy group ID LTE NDARDQCI
CSFallBackBlindHoC
LST
CSFALLBACKBLIN
DHOCFG
MOD
BTS3900, BTS3900 CSFALLBACKBLIN
CnOperatorId CN Operator ID LTE DHOCFG
CSFallBackBlindHoC
MOD
CSFALLBACKBLIN
DHOCFG
LST
Highest priority BTS3900, BTS3900 CSFALLBACKBLIN
InterRatHighestPri InterRat LTE DHOCFG
CSFallBackBlindHoC
MOD
CSFALLBACKBLIN
DHOCFG
LST
Second priority BTS3900, BTS3900 CSFALLBACKBLIN
InterRatSecondPri InterRat LTE DHOCFG
CSFallBackBlindHoC
MOD
CSFALLBACKBLIN
DHOCFG
LST
Lowest priority BTS3900, BTS3900 CSFALLBACKBLIN
InterRatLowestPri InterRat LTE DHOCFG
CSFallBackBlindHoC MOD
CSFALLBACKBLIN
DHOCFG
LST
UTRAN LCS BTS3900, BTS3900 CSFALLBACKBLIN
UtranLcsCap capability LTE DHOCFG
CSFALLBACKBLIN
DHOCFG
LST
GERAN LCS BTS3900, BTS3900 CSFALLBACKBLIN
GeranLcsCap capability LTE DHOCFG
CSFALLBACKBLIN
DHOCFG
LST
CDMA2000 LCS BTS3900, BTS3900 CSFALLBACKBLIN
CdmaLcsCap capability LTE DHOCFG
CSFallBackBlindHoC
MOD
CSFALLBACKBLIN
DHOCFG
CSFB Highest LST
priority InterRat for BTS3900, BTS3900 CSFALLBACKBLIN
IdleCsfbHighestPri Idle UE LTE DHOCFG
CSFallBackBlindHoC
MOD
CSFALLBACKBLIN
DHOCFG
CSFB Second LST
IdleCsfbSecondPri Idle UE LTE DHOCFG
CSFallBackBlindHoC
MOD
CSFALLBACKBLIN
DHOCFG
CSFB Lowest LST
IdleCsfbLowestPri Idle UE LTE DHOCFG
CSFallBackPolicyCfg
MOD
CSFALLBACKPOLI
CYCFG
LST
CSFB handover BTS3900, BTS3900 CSFALLBACKPOLI
CsfbHoPolicyCfg policy Configuration LTE CYCFG
MOD
CSFALLBACKPOLI
CSFallBackPolicyCfg CYCFG
CSFB handover LST
IdleModeCsfbHoPol policy Configuration BTS3900, BTS3900 CSFALLBACKPOLI
icyCfg for idle ue LTE CYCFG
ADD
INTERPLMNHOLIS
T
LST
InterPlmnHoList INTERPLMNHOLIS
T
RMV
BTS3900, BTS3900 INTERPLMNHOLIS
CnOperatorId CN Operator ID LTE T
InterPlmnHoList
ADD
INTERPLMNHOLIS
T
LST
INTERPLMNHOLIS
T
RMV
Target Mobile BTS3900, BTS3900 INTERPLMNHOLIS
TarMcc country code LTE T
InterPlmnHoList
ADD
INTERPLMNHOLIS
T
LST
INTERPLMNHOLIS
T
RMV
Target Mobile BTS3900, BTS3900 INTERPLMNHOLIS
TarMnc network code LTE T
ADD
RATFREQPRIORIT
YGROUP
LST
RATFREQPRIORIT
RatFreqPriorityGrou YGROUP
MOD
RATFREQPRIORIT
YGROUP
RMV
RatFreqPriorityGrou RAT frequency BTS3900, BTS3900 RATFREQPRIORIT
pId priority group ID LTE YGROUP
ADD
RATFREQPRIORIT
YGROUP
LST
RATFREQPRIORIT
RatFreqPriorityGrou YGROUP
MOD
RATFREQPRIORIT
YGROUP
RMV
BTS3900, BTS3900 RATFREQPRIORIT
RatType RAT Type LTE YGROUP
ADD
RATFREQPRIORIT
YGROUP
LST
RatFreqPriorityGrou RATFREQPRIORIT
YGROUP
MOD
RATFREQPRIORIT
YGROUP
RMV
DL Earfcn or BTS3900, BTS3900 RATFREQPRIORIT
DlEarfcn Bandclass LTE YGROUP
ADD
RATFREQPRIORIT
YGROUP
RatFreqPriorityGrou MOD
RATFREQPRIORIT
YGROUP
LST
BTS3900, BTS3900 RATFREQPRIORIT
Priority Priority LTE YGROUP
ADD
RATFREQPRIORIT
YGROUP
MOD
RatFreqPriorityGrou RATFREQPRIORIT
YGROUP
LST
GERAN Frequency BTS3900, BTS3900 RATFREQPRIORIT
BandIndicator Indicator LTE YGROUP
ADD
SERVICEIFHOCFG
GROUP
LST
SERVICEIFHOCFG
ServiceIfHoCfgGrou GROUP
MOD
SERVICEIFHOCFG
GROUP
RMV
BTS3900, BTS3900 SERVICEIFHOCFG
CnOperatorId CN Operator ID LTE GROUP
ADD
SERVICEIFHOCFG
GROUP
LST
SERVICEIFHOCFG
ServiceIfHoCfgGrou GROUP
MOD
SERVICEIFHOCFG
GROUP
Service-based inter- RMV
ServiceIfHoCfgGrou Freq handover BTS3900, BTS3900 SERVICEIFHOCFG
pId policy group ID LTE GROUP
ServiceIfHoCfgGrou
ADD
SERVICEIFHOCFG
GROUP
MOD
SERVICEIFHOCFG
GROUP
LST
Inter-Freq handover BTS3900, BTS3900 SERVICEIFHOCFG
InterFreqHoState state LTE GROUP
ADD
SERVICEIFHOCFG
GROUP
MOD
ServiceIfHoCfgGrou SERVICEIFHOCFG
GROUP
LST
BTS3900, BTS3900 SERVICEIFHOCFG
DlEarfcn Downlink EARFCN LTE GROUP
ADD
SERVICEIRHOCF
GGROUP
LST
SERVICEIRHOCF
ServiceIrHoCfgGrou GGROUP
MOD
SERVICEIRHOCF
GGROUP
RMV
BTS3900, BTS3900 SERVICEIRHOCF
CnOperatorId CN Operator ID LTE GGROUP
ADD
SERVICEIRHOCF
GGROUP
LST
SERVICEIRHOCF
ServiceIrHoCfgGrou GGROUP
MOD
SERVICEIRHOCF
GGROUP
Service-based inter- RMV
ServiceIrHoCfgGro RAT handover BTS3900, BTS3900 SERVICEIRHOCF
upId policy group ID LTE GGROUP
ADD
SERVICEIRHOCF
GGROUP
MOD
ServiceIrHoCfgGrou SERVICEIRHOCF
GGROUP
LST
Inter-RAT handover BTS3900, BTS3900 SERVICEIRHOCF
InterRatHoState state LTE GGROUP
ADD SPIDCFG
SpidCfg LST SPIDCFG
BTS3900, BTS3900 MOD SPIDCFG
Spid Spid LTE RMV SPIDCFG
SpidCfg
ADD SPIDCFG
DrxStatus Drx status LTE LST SPIDCFG
SpidCfg
ADD SPIDCFG
RAT frequency BTS3900, BTS3900 MOD SPIDCFG
RatFreqPriorityInd priority indication LTE LST SPIDCFG
SpidCfg ADD SPIDCFG

RatFreqPriorityGrou RAT frequency BTS3900, BTS3900 MOD SPIDCFG
pId priority group ID LTE LST SPIDCFG
SpidCfg
ADD SPIDCFG
PreallocationStatus PreallocationStatus LTE LST SPIDCFG
SpidCfg
ADD SPIDCFG
InterFreq Mlb BTS3900, BTS3900 MOD SPIDCFG
InterFreqMlbSwitch Switch LTE LST SPIDCFG
SpidCfg
ADD SPIDCFG
InterRatMlbSwitch InterRat Mlb Switch LTE LST SPIDCFG
SpidCfg
SPID-based ADD SPIDCFG

HoBackToHPLMNS Handover Back To BTS3900, BTS3900 MOD SPIDCFG
witch HPLMN Switch LTE LST SPIDCFG
LST
ENBCNOPQCIRSV
eNBCnOpQciRsvdPa DPARA
MOD
BTS3900, BTS3900 ENBCNOPQCIRSV
CnOperatorId CN Operator ID LTE DPARA
eNBCnOpQciRsvdPa
LST
ENBCNOPQCIRSV
DPARA
MOD
QoS Class BTS3900, BTS3900 ENBCNOPQCIRSV
Qci Indication LTE DPARA
eNBCnOpQciRsvdPa
MOD
ENBCNOPQCIRSV
DPARA
LST
Reserved Switch BTS3900, BTS3900 ENBCNOPQCIRSV
RsvdSwPara0 Parameter 0 LTE DPARA
eNBCnOpQciRsvdPa
MOD
ENBCNOPQCIRSV
DPARA
LST
eNBCnOpQciRsvdPa
MOD
ENBCNOPQCIRSV
DPARA
LST
eNBCnOpQciRsvdPa
MOD
ENBCNOPQCIRSV
DPARA
LST
Reserved BTS3900, BTS3900 ENBCNOPQCIRSV
RsvdPara2 Parameter 2 LTE DPARA
eNBCnOpQciRsvdPa
MOD
ENBCNOPQCIRSV
DPARA
LST
eNBCnOpQciRsvdPa
MOD
ENBCNOPQCIRSV
DPARA
LST
eNBCnOpQciRsvdPa
MOD
ENBCNOPQCIRSV
DPARA
LST
eNBCnOpQciRsvdPa
MOD
ENBCNOPQCIRSV
DPARA
LST
eNBCnOpQciRsvdPa
MOD
ENBCNOPQCIRSV
DPARA
LST
eNBCnOpQciRsvdPa
MOD
ENBCNOPQCIRSV
DPARA
LST
eNBCnOpQciRsvdPa
MOD
ENBCNOPQCIRSV
DPARA
LST
eNBCnOpQciRsvdPa
MOD
ENBCNOPQCIRSV
DPARA
LST
eNBCnOpQciRsvdPa
MOD
ENBCNOPQCIRSV
DPARA
LST
eNBCnOpQciRsvdPa
MOD
ENBCNOPQCIRSV
DPARA
LST
eNBCnOpQciRsvdPa
MOD
ENBCNOPQCIRSV
DPARA
LST
eNBCnOpQciRsvdPa
MOD
ENBCNOPQCIRSV
DPARA
LST
eNBCnOpQciRsvdPa
MOD
ENBCNOPQCIRSV
DPARA
LST
eNBCnOpQciRsvdPa
MOD
ENBCNOPQCIRSV
DPARA
LST
eNBCnOpQciRsvdPa
MOD
ENBCNOPQCIRSV
DPARA
LST
eNBCnOpQciRsvdPa
MOD
ENBCNOPQCIRSV
DPARA
LST
eNBCnOpQciRsvdPa
MOD
ENBCNOPQCIRSV
DPARA
LST
eNBCnOpQciRsvdPa
MOD
ENBCNOPQCIRSV
DPARA
LST
eNBCnOpQciRsvdPa
MOD
ENBCNOPQCIRSV
DPARA
LST
eNodeBFunction
ADD
ENODEBFUNCTIO
N
MOD
ENODEBFUNCTIO
N
RMV
ENODEBFUNCTIO
N
LST
eNodeBFunctionNa eNodeB Function BTS3900, BTS3900 ENODEBFUNCTIO
me Name LTE N
ADD
eNodeBFunction ENODEBFUNCTIO
N
LST
Application BTS3900, BTS3900 ENODEBFUNCTIO
ApplicationRef Reference LTE N
ADD
ENODEBFUNCTIO
N
eNodeBFunction MOD
ENODEBFUNCTIO
N
LST
BTS3900, BTS3900 ENODEBFUNCTIO
eNodeBId eNodeB ID LTE N
ADD
ENODEBFUNCTIO
N
MOD
eNodeBFunction ENODEBFUNCTIO
N
LST
UserLabel User Label LTE N
eNodeBFunction
LST
NermVersion NeRM Version LTE N
CounterCheckPara
MOD
COUNTERCHECK
PARA
LST
BTS3900, BTS3900 COUNTERCHECK
CounterCheckTimer Counter check timer LTE PARA
CounterCheckPara
MOD
COUNTERCHECK
PARA
LST
CounterCheckCoun Counter check BTS3900, BTS3900 COUNTERCHECK
tNum count number LTE PARA
CounterCheckPara
MOD
COUNTERCHECK
PARA
LST
CounterCheckUser Counter check user BTS3900, BTS3900 COUNTERCHECK
RelSwitch Release switch LTE PARA
ENodeBCipherCap
MOD
ENODEBCIPHERC
AP
LST
Primary cipher BTS3900, BTS3900 ENODEBCIPHERC
PrimaryCipherAlgo algorithm LTE AP
ENodeBCipherCap
MOD
ENODEBCIPHERC
AP
LST
Second cipher BTS3900, BTS3900 ENODEBCIPHERC
SecondCipherAlgo algorithm LTE AP
ENodeBCipherCap
MOD
ENODEBCIPHERC
AP
LST
Third cipher BTS3900, BTS3900 ENODEBCIPHERC
ThirdCipherAlgo algorithm LTE AP
ENodeBCipherCap
MOD
ENODEBCIPHERC
AP
LST
Fourth cipher BTS3900, BTS3900 ENODEBCIPHERC
FourthCipherAlgo algorithm LTE AP
ENodeBConnStateTi
MOD
ENODEBCONNSTA
TETIMER
LST
S1MessageWaiting S1 Message BTS3900, BTS3900 ENODEBCONNSTA
Timer Waiting Timer LTE TETIMER
ENodeBConnStateTi
MOD
ENODEBCONNSTA
TETIMER
LST
X2MessageWaiting X2 Message BTS3900, BTS3900 ENODEBCONNSTA
ENodeBConnStateTi
MOD
ENODEBCONNSTA
TETIMER
LST
UuMessageWaiting UU Message BTS3900, BTS3900 ENODEBCONNSTA
ENodeBConnStateTi
MOD
ENODEBCONNSTA
TETIMER
CDMA2000 1xRTT LST
Cdma1XrttHoUuPre HO Uu Prepare BTS3900, BTS3900 ENODEBCONNSTA
pareTimer Timer LTE TETIMER
ENodeBConnStateTi
MOD
ENODEBCONNSTA
TETIMER
CDMA2000 1xRTT LST
Cdma1XrttHoS1Wa HO S1 Waiting BTS3900, BTS3900 ENODEBCONNSTA
itingTimer Timer LTE TETIMER
ENodeBConnStateTi
MOD
ENODEBCONNSTA
TETIMER
LST
Cdma1XrttHoCompl CDMA2000 1xRTT BTS3900, BTS3900 ENODEBCONNSTA
eteTimer HO Complete Timer LTE TETIMER
ENodeBConnStateTi
MOD
ENODEBCONNSTA
TETIMER
LST
CdmaHrpdHoComp CDMA2000 HRPD BTS3900, BTS3900 ENODEBCONNSTA
leteTimer HO Complete Timer LTE TETIMER
ENodeBConnStateTi
MOD
ENODEBCONNSTA
TETIMER
CDMA2000 HRPD LST
CdmaHrpdHoS1Wa HO S1 Waiting BTS3900, BTS3900 ENODEBCONNSTA
itingTimer Timer LTE TETIMER
ENodeBConnStateTi
MOD
ENODEBCONNSTA
TETIMER
CDMA2000 HRPD LST
CdmaHrpdHoUuPre HO Uu Prepare BTS3900, BTS3900 ENODEBCONNSTA
pareTimer Timer LTE TETIMER
ENodeBConnStateTi
MOD
ENODEBCONNSTA
TETIMER
LST
WaitRrcConnSetup RRCConnSetupCm BTS3900, BTS3900 ENODEBCONNSTA
CmpTimer p Waiting Timer LTE TETIMER
ENodeBConnStateTi
MOD
ENODEBCONNSTA
TETIMER
LST
SecCmpWaitingTim SecurityModeComp BTS3900, BTS3900 ENODEBCONNSTA
er lete Waiting Timer LTE TETIMER
ENodeBConnStateTi
MOD
ENODEBCONNSTA
TETIMER
Unprotected LST
UpUeCapInfoWaitin UeCapInfo Waiting BTS3900, BTS3900 ENODEBCONNSTA
gTimer Timer LTE TETIMER
ENodeBConnStateTi
MOD
ENODEBCONNSTA
TETIMER
LST
FirstForwardPacket First Forward BTS3900, BTS3900 ENODEBCONNSTA
Timer Packet Timer LTE TETIMER
ENodeBConnStateTi
MOD
ENODEBCONNSTA
TETIMER
LST
BTS3900, BTS3900 ENODEBCONNSTA
EndMarkerTimer End Marker Timer LTE TETIMER
ENodeBIntegrityCap
MOD
ENODEBINTEGRIT
YCAP
LST
PrimaryIntegrityAlg Primary integrity BTS3900, BTS3900 ENODEBINTEGRIT
o algorithm LTE YCAP
ENodeBIntegrityCap
MOD
ENODEBINTEGRIT
YCAP
LST
SecondIntegrityAlg Second integrity BTS3900, BTS3900 ENODEBINTEGRIT
o algorithm LTE YCAP
ENodeBIntegrityCap
MOD
ENODEBINTEGRIT
YCAP
LST
Third integrity BTS3900, BTS3900 ENODEBINTEGRIT
ThirdIntegrityAlgo algorithm LTE YCAP
ENodeBIntegrityCap
MOD
ENODEBINTEGRIT
YCAP
LST
NULL Algorithm BTS3900, BTS3900 ENODEBINTEGRIT
NullAlgo config switch LTE YCAP
PdcpRohcPara
MOD
PDCPROHCPARA
RohcSwitch ROHC switch LTE PDCPROHCPARA
PdcpRohcPara
MOD
PDCPROHCPARA
ROHC Highest BTS3900, BTS3900 LST
HighestMode mode LTE PDCPROHCPARA
PdcpRohcPara
MOD
PDCPROHCPARA
Compression BTS3900, BTS3900 LST
Profiles profiles LTE PDCPROHCPARA
RrcConnStateTimer
MOD
RRCCONNSTATET
IMER
LST
BTS3900, BTS3900 RRCCONNSTATET
T302 Timer302 LTE IMER
RrcConnStateTimer
MOD
RRCCONNSTATET
IMER
LST
T320ForLoadBalan Timer320 for load BTS3900, BTS3900 RRCCONNSTATET
ce balance LTE IMER
RrcConnStateTimer
MOD
RRCCONNSTATET
IMER
LST
Timer304 for BTS3900, BTS3900 RRCCONNSTATET
T304ForEutran EUTRAN LTE IMER
RrcConnStateTimer
MOD
RRCCONNSTATET
IMER
LST
Timer304 for BTS3900, BTS3900 RRCCONNSTATET
T304ForGeran GERAN LTE IMER
RrcConnStateTimer
MOD
RRCCONNSTATET
IMER
LST
T320ForOther Timer320 for other LTE IMER
RrcConnStateTimer
MOD
RRCCONNSTATET
IMER
LST
UeInactiveTimer Ue inactive timer LTE IMER
RrcConnStateTimer
MOD
RRCCONNSTATET
IMER
LST
UlSynTimer Uplink Sync Timer LTE IMER
RrcConnStateTimer
MOD
RRCCONNSTATET
IMER
Filter Repeated LST
FilterReptRrcConn RRCConnReq BTS3900, BTS3900 RRCCONNSTATET
ReqTimer Timer LTE IMER
RrcConnStateTimer
MOD
RRCCONNSTATET
IMER
LST
UeInactivityTimerDy UE Inactivity Timer BTS3900, BTS3900 RRCCONNSTATET
nDrx Dynamic DRX LTE IMER
RrcConnStateTimer
MOD
RRCCONNSTATET
IMER
LST
Uplink Sync Timer BTS3900, BTS3900 RRCCONNSTATET
UlSynTimerDynDrx Dynamic DRX LTE IMER
ADD
TCEIPMAPPING
LST
TceIpMapping TCEIPMAPPING
MOD
TCEIPMAPPING
BTS3900, BTS3900 RMV
TceId TCE ID LTE TCEIPMAPPING
ADD
TCEIPMAPPING
TceIpMapping MOD
TCEIPMAPPING
IPMode IP Mode LTE TCEIPMAPPING
TceIpMapping
ADD
TCEIPMAPPING
MOD
TCEIPMAPPING
TceIpV4Addr TCE IPv4 Address LTE TCEIPMAPPING
TceIpMapping
ADD
TCEIPMAPPING
MOD
TCEIPMAPPING
TceIpV6Addr TCE IPv6 Address LTE TCEIPMAPPING
ADD
X2AUTOSETUPOP
ERATOR
RMV
X2AutoSetupOperato X2AUTOSETUPOP
ERATOR
LST
Mobile country BTS3900, BTS3900 X2AUTOSETUPOP
Mcc code LTE ERATOR
ADD
X2AutoSetupOperato X2AUTOSETUPOP
ERATOR
RMV
X2AUTOSETUPOP
ERATOR
LST
Mobile network BTS3900, BTS3900 X2AUTOSETUPOP
Mnc code LTE ERATOR
CaMgtCfg
BTS3900, BTS3900 LST CAMGTCFG
LocalCellId Local cell ID LTE MOD CAMGTCFG
CaMgtCfg
CarrAggrA2ThdRsr Carrier Aggregation BTS3900, BTS3900 MOD CAMGTCFG

p A2 RSRP threshold LTE LST CAMGTCFG
CaMgtCfg
CarrAggrA4ThdRsr Carrier Aggregation BTS3900, BTS3900 MOD CAMGTCFG

p A4 RSRP threshold LTE LST CAMGTCFG
CaMgtCfg
Carrier
Management BTS3900, BTS3900 MOD CAMGTCFG
CarrierMgtSwitch Switch LTE LST CAMGTCFG
CaMgtCfg
CA Active Buffer BTS3900, BTS3900 MOD CAMGTCFG

ActiveBufferLenThd Length Threshold LTE LST CAMGTCFG
CaMgtCfg
DeactiveBufferLenT CA Deactive Buffer BTS3900, BTS3900 MOD CAMGTCFG

hd Length Threshold LTE LST CAMGTCFG
CaMgtCfg
ActiveBufferDelayT CA Active Buffer BTS3900, BTS3900 MOD CAMGTCFG

hd Delay Threshold LTE LST CAMGTCFG
CaMgtCfg
CA Deactive
DeactiveThroughpu Throughput BTS3900, BTS3900 MOD CAMGTCFG
tThd Threshold LTE LST CAMGTCFG
LST
CELLDLCOMPALG
CellDlCompAlgo O
MOD
BTS3900, BTS3900 CELLDLCOMPALG
LocalCellId LocalCellId LTE O
CellDlCompAlgo
MOD
CELLDLCOMPALG
O
LST
BTS3900, BTS3900 CELLDLCOMPALG
DlCompA3Offset DlCompA3Offset LTE O
LST
CELLDLPCPDSCH
CellDlpcPdschPa PA
MOD
BTS3900, BTS3900 CELLDLPCPDSCH
LocalCellId Local cell ID LTE PA
CellDlpcPdschPa
MOD
CELLDLPCPDSCH
PA
LST
BTS3900, BTS3900 CELLDLPCPDSCH
PdschPaAdjSwitch PA adjusting switch LTE PA
CellDlpcPdschPa
MOD
CELLDLPCPDSCH
PA
LST
PA for even power BTS3900, BTS3900 CELLDLPCPDSCH
PaPcOff distribution LTE PA
LST
CellDrxPara CELLDRXPARA
LocalCellId Local cell ID LTE CELLDRXPARA
CellDrxPara
MOD
CELLDRXPARA
FDD enter DRX BTS3900, BTS3900 LST
FddEnterDrxThd threshold LTE CELLDRXPARA
CellDrxPara
MOD
CELLDRXPARA
FDD exit DRX BTS3900, BTS3900 LST
FddExitDrxThd threshold LTE CELLDRXPARA
CellDrxPara
MOD
CELLDRXPARA
TDD enter DRX BTS3900, BTS3900 LST
TddEnterDrxThdUl threshold Uplink LTE CELLDRXPARA
CellDrxPara
MOD
CELLDRXPARA
TDD exit DRX BTS3900, BTS3900 LST
TddExitDrxThdUl threshold Uplink LTE CELLDRXPARA
CellDrxPara
MOD
CELLDRXPARA
TDD enter DRX BTS3900, BTS3900 LST
TddEnterDrxThdDl threshold Downlink LTE CELLDRXPARA
CellDrxPara
MOD
CELLDRXPARA
TDD exit DRX BTS3900, BTS3900 LST
TddExitDrxThdDl threshold Downlink LTE CELLDRXPARA
CellDrxPara
MOD
CELLDRXPARA
DataAmountStatTi Data amount BTS3900, BTS3900 LST
mer Statistic timer LTE CELLDRXPARA
CellDrxPara
MOD
DRX Power Saving CELLDRXPARA
TddPowerSaveMea Measurement BTS3900, BTS3900 LST
sSwitch Switch LTE CELLDRXPARA
CellDrxPara
MOD
TddPowerSaveStat Measurement BTS3900, BTS3900 LST
Timer Period LTE CELLDRXPARA
CellDrxPara
MOD
TddPowerSavingEn Measurement Enter BTS3900, BTS3900 LST
terDrxThd DRX Threshold LTE CELLDRXPARA
CellDrxPara
MOD
TddPowerSavingEx Measurement Exit BTS3900, BTS3900 LST
itDrxThd DRX Threshold LTE CELLDRXPARA
CellDrxPara
MOD
CELLDRXPARA
LongDrxCycleUnsy UnSync Long DRX BTS3900, BTS3900 LST
nc Cycle LTE CELLDRXPARA
CellDrxPara
MOD
CELLDRXPARA
Cqi-Mask Config BTS3900, BTS3900 LST
CqiMask Switch LTE CELLDRXPARA
CellDrxPara
MOD
CELLDRXPARA
OndurationTimerUn Onduration Timer BTS3900, BTS3900 LST
sync Unsync LTE CELLDRXPARA
CellDrxPara
MOD
CELLDRXPARA
DrxInactivityTimerU DRX Inactivity BTS3900, BTS3900 LST
nsync Timer Unsync LTE CELLDRXPARA
LST
CellHoParaCfg CELLHOPARACFG
LocalCellId Local cell ID LTE CELLHOPARACFG
CellHoParaCfg
MOD
BlindHO A1A2 CELLHOPARACFG
BlindHoA1A2ThdRs RSRP trigger BTS3900, BTS3900 LST
rp threshold LTE CELLHOPARACFG
CellHoParaCfg
MOD
BlindHO A1A2 CELLHOPARACFG
BlindHoA1A2ThdRs RSRQ trigger BTS3900, BTS3900 LST
rq threshold LTE CELLHOPARACFG
LST
CELLULCOMPALG
CellUlCompAlgo O
MOD
BTS3900, BTS3900 CELLULCOMPALG
LocalCellId LocalCellId LTE O
CellUlCompAlgo
MOD
CELLULCOMPALG
O
LST
BTS3900, BTS3900 CELLULCOMPALG
UlCompA3Offset UlCompA3Offset LTE O
LST
CellUlpcDedic CELLULPCDEDIC
LocalCellId Local cell ID LTE CELLULPCDEDIC
CellUlpcDedic
MOD
CELLULPCDEDIC
Delta-MCS enable BTS3900, BTS3900 LST
DeltaMcsEnabled or disable indication LTE CELLULPCDEDIC
CellUlpcDedic
Power Offset of MOD

SRS When CELLULPCDEDIC
PSrsOffsetDeltaMc DeltaMcsEnabled BTS3900, BTS3900 LST
sDisable Off LTE CELLULPCDEDIC
CellUlpcDedic
Power Offset of MOD

SRS When CELLULPCDEDIC
PSrsOffsetDeltaMc DeltaMcsEnabled BTS3900, BTS3900 LST
sEnable On LTE CELLULPCDEDIC
CellUlpcDedic
MOD
CELLULPCDEDIC
RSRP filtering BTS3900, BTS3900 LST
FilterRsrp coefficient LTE CELLULPCDEDIC
LST
DistBasedHO DISTBASEDHO
LocalCellId Local cell ID LTE DISTBASEDHO
DistBasedHO
MOD
Distance-based DISTBASEDHO
DistBasedMeasObj Measurement BTS3900, BTS3900 LST
Type Object Type LTE DISTBASEDHO
DistBasedHO
MOD
Distance-based DISTBASEDHO
Handover BTS3900, BTS3900 LST
DistBasedHOThd Threshold LTE DISTBASEDHO
ADD
DRXPARAGROUP
LST
DrxParaGroup DRXPARAGROUP
MOD
DRXPARAGROUP
LocalCellId Local cell ID LTE DRXPARAGROUP
ADD
DRXPARAGROUP
LST
DrxParaGroup DRXPARAGROUP
MOD
DRXPARAGROUP
DRX parameter BTS3900, BTS3900 RMV
DrxParaGroupId group ID LTE DRXPARAGROUP
DrxParaGroup
ADD
DRXPARAGROUP
MOD
DRXPARAGROUP
EnterDrxSwitch Enter DRX Switch LTE DRXPARAGROUP
DrxParaGroup
ADD
DRXPARAGROUP
MOD
DRXPARAGROUP
OnDurationTimer On Duration Timer LTE DRXPARAGROUP
DrxParaGroup
ADD
DRXPARAGROUP
MOD
DRXPARAGROUP
DRX Inactivity BTS3900, BTS3900 LST
DrxInactivityTimer Timer LTE DRXPARAGROUP
DrxParaGroup
ADD
DRXPARAGROUP
MOD
DRX DRXPARAGROUP
Retransmission BTS3900, BTS3900 LST
DrxReTxTimer Timer LTE DRXPARAGROUP
DrxParaGroup
ADD
DRXPARAGROUP
MOD
DRXPARAGROUP
LongDrxCycle Long DRX Cycle LTE DRXPARAGROUP
DrxParaGroup
ADD
DRXPARAGROUP
MOD
Short-cycle DRX DRXPARAGROUP
supported BTS3900, BTS3900 LST
SupportShortDrx indication LTE DRXPARAGROUP
DrxParaGroup
ADD
DRXPARAGROUP
MOD
DRXPARAGROUP
ShortDrxCycle Short DRX Cycle LTE DRXPARAGROUP
DrxParaGroup
ADD
DRXPARAGROUP
MOD
DRXPARAGROUP
DRX Short Cycle BTS3900, BTS3900 LST
DrxShortCycleTimer Timer LTE DRXPARAGROUP
ADD
GERANINTERFAR
FCN
LST
GERANINTERFAR
GeranInterfArfcn FCN
MOD
GERANINTERFAR
FCN
RMV
BTS3900, BTS3900 GERANINTERFAR
LocalCellId Local cell ID LTE FCN
ADD
GERANINTERFAR
FCN
LST
GeranInterfArfcn GERANINTERFAR
FCN
MOD
GERANINTERFAR
FCN
Interference RMV
InterfGeranCellBcc GERAN BCCH BTS3900, BTS3900 GERANINTERFAR
hArfcn ARFCN LTE FCN
GeranInterfArfcn
ADD
GERANINTERFAR
FCN
MOD
GERANINTERFAR
FCN
Interference LST
InterfGeranCarBan GERAN Frequency BTS3900, BTS3900 GERANINTERFAR
dInd Band Indicator LTE FCN
ADD
INTERRATHOCOM
MGROUP
LST
INTERRATHOCOM
InterRatHoCommGro MGROUP
MOD
INTERRATHOCOM
MGROUP
RMV
BTS3900, BTS3900 INTERRATHOCOM
LocalCellId Local cell ID LTE MGROUP
ADD
INTERRATHOCOM
MGROUP
LST
InterRatHoCommGro INTERRATHOCOM
MGROUP
MOD
INTERRATHOCOM
MGROUP
RMV
InterRatHoCommGr InterRAT handover BTS3900, BTS3900 INTERRATHOCOM
oupId common group ID LTE MGROUP
InterRatHoCommGro
ADD
INTERRATHOCOM
MGROUP
MOD
INTERRATHOCOM
MGROUP
LST
InterRatHoA1A2Hy InterRAT A1A2 BTS3900, BTS3900 INTERRATHOCOM
st hysteresis LTE MGROUP
InterRatHoCommGro
ADD
INTERRATHOCOM
MGROUP
MOD
INTERRATHOCOM
MGROUP
LST
InterRatHoA1A2Tim InterRAT A1A2 time BTS3900, BTS3900 INTERRATHOCOM
eToTrig to trigger LTE MGROUP
InterRatHoCommGro
ADD
INTERRATHOCOM
MGROUP
MOD
INTERRATHOCOM
MGROUP
LST
InterRatHoA1ThdR InterRAT A1 RSRP BTS3900, BTS3900 INTERRATHOCOM
srp trigger threshold LTE MGROUP
InterRatHoCommGro
ADD
INTERRATHOCOM
MGROUP
MOD
INTERRATHOCOM
MGROUP
LST
InterRatHoA1ThdR InterRAT A1 RSRQ BTS3900, BTS3900 INTERRATHOCOM
srq trigger threshold LTE MGROUP
InterRatHoCommGro
ADD
INTERRATHOCOM
MGROUP
MOD
INTERRATHOCOM
MGROUP
LST
InterRatHoA2ThdR InterRAT A2 RSRP BTS3900, BTS3900 INTERRATHOCOM
srp trigger threshold LTE MGROUP
InterRatHoCommGro
ADD
INTERRATHOCOM
MGROUP
MOD
INTERRATHOCOM
MGROUP
LST
InterRatHoA2ThdR InterRAT A2 RSRQ BTS3900, BTS3900 INTERRATHOCOM
srq trigger threshold LTE MGROUP
ADD
InterRatHoCommGro INTERRATHOCOM
MGROUP
MOD
INTERRATHOCOM
MGROUP
LST
BlindHoA2ThdOffse Blind HO A2 BTS3900, BTS3900 INTERRATHOCOM
t Threshold Offset LTE MGROUP
ADD
INTERRATHOCDM
A1XRTTGROUP
LST
INTERRATHOCDM
InterRatHoCdma1xRt A1XRTTGROUP
MOD
INTERRATHOCDM
A1XRTTGROUP
RMV
BTS3900, BTS3900 INTERRATHOCDM
LocalCellId Local cell ID LTE A1XRTTGROUP
ADD
INTERRATHOCDM
A1XRTTGROUP
LST
INTERRATHOCDM
MOD
INTERRATHOCDM
InterRAT handover A1XRTTGROUP
to RMV
InterRatHoCdma1x CDMA20001xRTT BTS3900, BTS3900 INTERRATHOCDM
RttGroupId group ID LTE A1XRTTGROUP
InterRatHoCdma1xRt
ADD
INTERRATHOCDM
A1XRTTGROUP
MOD
INTERRATHOCDM
A1XRTTGROUP
CDMA20001XRTT LST
InterRatHoCdmaB1 handover BTS3900, BTS3900 INTERRATHOCDM
Hyst hysteresis LTE A1XRTTGROUP
ADD
INTERRATHOCDM
MOD
INTERRATHOCDM
A1XRTTGROUP
CoverageBased LST
InterRatHoCdmaB1 CDMA20001XRTT BTS3900, BTS3900 INTERRATHOCDM
ThdPs trigger threshold LTE A1XRTTGROUP
InterRatHoCdma1xRt
ADD
INTERRATHOCDM
A1XRTTGROUP
MOD
INTERRATHOCDM
A1XRTTGROUP
LST
InterRatHoCdmaB1 CDMA20001XRTT BTS3900, BTS3900 INTERRATHOCDM
TimeToTrig time to trigger LTE A1XRTTGROUP
InterRatHoCdma1xRt
ADD
INTERRATHOCDM
A1XRTTGROUP
MOD
INTERRATHOCDM
Load Service A1XRTTGROUP
Based LST
LdSvBasedHoCdm CDMA20001XRTT BTS3900, BTS3900 INTERRATHOCDM
aB1ThdPs trigger threshold LTE A1XRTTGROUP
ADD
RLFTIMERCONST
GROUP
LST
RLFTIMERCONST
RlfTimerConstGroup GROUP
MOD
RLFTIMERCONST
GROUP
RMV
BTS3900, BTS3900 RLFTIMERCONST
LocalCellId Local cell ID LTE GROUP
ADD
RLFTIMERCONST
GROUP
LST
RLFTIMERCONST
RlfTimerConstGroup GROUP
MOD
RLFTIMERCONST
GROUP
RMV
RlfTimerConstGrou RLF timer and BTS3900, BTS3900 RLFTIMERCONST
pId constants group ID LTE GROUP
RlfTimerConstGroup ADD
RLFTIMERCONST
GROUP
MOD
RLFTIMERCONST
GROUP
LST
T301 Timer 301 LTE GROUP
RlfTimerConstGroup
ADD
RLFTIMERCONST
GROUP
MOD
RLFTIMERCONST
GROUP
LST
ADD
RlfTimerConstGroup RLFTIMERCONST
GROUP
MOD
RLFTIMERCONST
GROUP
LST
ADD
RLFTIMERCONST
GROUP
MOD
GROUP
LST
N310 Constant N310 LTE GROUP
ADD
RLFTIMERCONST
GROUP
MOD
GROUP
LST
N311 Constant N311 LTE GROUP
ADD
CELLEXTENDEDQ
CI
LST
CELLEXTENDEDQ
CellExtendedQci CI
MOD
CELLEXTENDEDQ
CI
RMV
BTS3900, BTS3900 CELLEXTENDEDQ
ExtendedQci Extended QCI LTE CI
ADD
CELLEXTENDEDQ
CI
LST
CELLEXTENDEDQ
CellExtendedQci CI
MOD
CELLEXTENDEDQ
CI
RMV
BTS3900, BTS3900 CELLEXTENDEDQ
LocalCellId Local cell ID LTE CI
ADD
CELLEXTENDEDQ
CI
MOD
CellExtendedQci CELLEXTENDEDQ
CI
LST
InterFreqHoGroupI Interfreq handover BTS3900, BTS3900 CELLEXTENDEDQ
d group ID LTE CI
ADD
CELLEXTENDEDQ
CI
MOD
InterRAT handover CI
to LST
InterRatHoCdma1x CDMA20001xRTT BTS3900, BTS3900 CELLEXTENDEDQ
RttGroupId group ID LTE CI
ADD
CELLEXTENDEDQ
CI
MOD
InterRAT handover CI
to LST
InterRatHoCdmaHr CDMA2000HRPD BTS3900, BTS3900 CELLEXTENDEDQ
pdGroupId group ID LTE CI
ADD
CELLEXTENDEDQ
CellExtendedQci CI
MOD
CELLEXTENDEDQ
CI
LST
InterRatHoCommGr InterRAT handover BTS3900, BTS3900 CELLEXTENDEDQ
oupId common group ID LTE CI
ADD
CELLEXTENDEDQ
CI
MOD
CellExtendedQci
CELLEXTENDEDQ
CI
LST
InterRatHoGeranGr InterRAT handover BTS3900, BTS3900 CELLEXTENDEDQ
oupId to GERAN group ID LTE CI
ADD
CELLEXTENDEDQ
CI
MOD
CI
LST
InterRatHoUtranGro InterRAT handover BTS3900, BTS3900 CELLEXTENDEDQ
upId to UTRAN Group ID LTE CI
ADD
CELLEXTENDEDQ
CI
MOD
CI
LST
IntraFreqHoGroupI Intrafreq handover BTS3900, BTS3900 CELLEXTENDEDQ
d group ID LTE CI
ADD
CELLEXTENDEDQ
CI
MOD
CI
LST
DRX parameter BTS3900, BTS3900 CELLEXTENDEDQ
DrxParaGroupId group ID LTE CI
ADD
CELLEXTENDEDQ
CI
MOD
CI
LST
RlfTimerConstCfgIn RLF timer and BTS3900, BTS3900 CELLEXTENDEDQ
d constants indication LTE CI
ADD
CELLEXTENDEDQ
CI
MOD
CI
LST
RlfTimerConstGrou RLF timer and BTS3900, BTS3900 CELLEXTENDEDQ
pId constants group ID LTE CI
CellExtendedQci
ADD
CELLEXTENDEDQ
CI
MOD
CELLEXTENDEDQ
CI
LST
Traffic Release BTS3900, BTS3900 CELLEXTENDEDQ
TrafficRelDelay Delay LTE CI
LST
CELLSTANDARDQ
CellStandardQci CI
MOD
BTS3900, BTS3900 CELLSTANDARDQ
LocalCellId Local cell ID LTE CI
CellStandardQci
LST
CELLSTANDARDQ
CI
MOD
QoS Class BTS3900, BTS3900 CELLSTANDARDQ
Qci Indication LTE CI
MOD
CELLSTANDARDQ
CellStandardQci CI
LST
InterFreqHoGroupI Interfreq handover BTS3900, BTS3900 CELLSTANDARDQ
d group ID LTE CI
MOD
CELLSTANDARDQ
CellStandardQci InterRAT handover CI
to LST
InterRatHoCdma1x CDMA20001xRTT BTS3900, BTS3900 CELLSTANDARDQ
RttGroupId group ID LTE CI
MOD
CELLSTANDARDQ
CellStandardQci InterRAT handover CI
to LST
InterRatHoCdmaHr CDMA2000HRPD BTS3900, BTS3900 CELLSTANDARDQ
pdGroupId group ID LTE CI
CellStandardQci
MOD
CELLSTANDARDQ
CI
LST
InterRatHoCommGr InterRAT handover BTS3900, BTS3900 CELLSTANDARDQ
oupId common group ID LTE CI
MOD
CELLSTANDARDQ
CellStandardQci CI
LST
InterRatHoGeranGr InterRAT handover BTS3900, BTS3900 CELLSTANDARDQ
oupId to GERAN group ID LTE CI
MOD
CELLSTANDARDQ
CellStandardQci CI
LST
InterRatHoUtranGro InterRAT handover BTS3900, BTS3900 CELLSTANDARDQ
upId to UTRAN Group ID LTE CI
MOD
CELLSTANDARDQ
CellStandardQci CI
LST
IntraFreqHoGroupI Intrafreq handover BTS3900, BTS3900 CELLSTANDARDQ
d group ID LTE CI
MOD
CELLSTANDARDQ
CellStandardQci CI
LST
DRX parameter BTS3900, BTS3900 CELLSTANDARDQ
DrxParaGroupId group ID LTE CI
CellStandardQci
MOD
CELLSTANDARDQ
CI
LST
BTS3900, BTS3900 CELLSTANDARDQ
SriPeriod SRI Period LTE CI
MOD
CELLSTANDARDQ
CellStandardQci CI
LST
RlfTimerConstCfgIn RLF timer and BTS3900, BTS3900 CELLSTANDARDQ
d constants indication LTE CI
MOD
CELLSTANDARDQ
CellStandardQci CI
LST
RlfTimerConstGrou RLF timer and BTS3900, BTS3900 CELLSTANDARDQ
pId constants group ID LTE CI
CellStandardQci
MOD
CELLSTANDARDQ
CI
LST
Traffic Release BTS3900, BTS3900 CELLSTANDARDQ
TrafficRelDelay Delay LTE CI
ADD
INTERRATHOCDM
AHRPDGROUP
LST
INTERRATHOCDM
InterRatHoCdmaHrp AHRPDGROUP
MOD
INTERRATHOCDM
AHRPDGROUP
RMV
BTS3900, BTS3900 INTERRATHOCDM
LocalCellId Local cell ID LTE AHRPDGROUP
ADD
INTERRATHOCDM
AHRPDGROUP
LST
INTERRATHOCDM
InterRatHoCdmaHrp AHRPDGROUP
MOD
INTERRATHOCDM
InterRAT handover AHRPDGROUP
to RMV
InterRatHoCdmaHr CDMA2000HRPD BTS3900, BTS3900 INTERRATHOCDM
pdGroupId group ID LTE AHRPDGROUP
InterRatHoCdmaHrp
ADD
INTERRATHOCDM
AHRPDGROUP
MOD
INTERRATHOCDM
AHRPDGROUP
CDMA2000HRPD LST
InterRatHoCdmaB1 handover BTS3900, BTS3900 INTERRATHOCDM
Hyst hysteresis LTE AHRPDGROUP
ADD
InterRatHoCdmaHrp INTERRATHOCDM
AHRPDGROUP
MOD
INTERRATHOCDM
AHRPDGROUP
CoverageBased LST
InterRatHoCdmaB1 CDMA2000HRPD BTS3900, BTS3900 INTERRATHOCDM
ThdPs trigger threshold LTE AHRPDGROUP
InterRatHoCdmaHrp
ADD
INTERRATHOCDM
AHRPDGROUP
MOD
INTERRATHOCDM
AHRPDGROUP
LST
InterRatHoCdmaB1 CDMA2000HRPD BTS3900, BTS3900 INTERRATHOCDM
TimeToTrig time to trigger LTE AHRPDGROUP
InterRatHoCdmaHrp
ADD
INTERRATHOCDM
AHRPDGROUP
MOD
INTERRATHOCDM
Load Service AHRPDGROUP
Based LST
LdSvBasedHoCdm CDMA2000HRPD BTS3900, BTS3900 INTERRATHOCDM
aB1ThdPs trigger threshold LTE AHRPDGROUP
ADD
INTERRATHOCDM
AHRPDGROUP
MOD
Cdma2000 HRPD AHRPDGROUP
Optimized LST
Cdma2000HrpdB2T handover B2 RSRP BTS3900, BTS3900 INTERRATHOCDM
hd1Rsrp thld1 LTE AHRPDGROUP
ADD
INTERRATHOCDM
AHRPDGROUP
MOD
Cdma2000 HRPD AHRPDGROUP
Optimized LST
Cdma2000HrpdB2T handover B2 RSRQ BTS3900, BTS3900 INTERRATHOCDM
hd1Rsrq thld1 LTE AHRPDGROUP
ADD
INTERRATHOGER
ANGROUP
LST
INTERRATHOGER
InterRatHoGeranGro ANGROUP
MOD
INTERRATHOGER
ANGROUP
RMV
BTS3900, BTS3900 INTERRATHOGER
LocalCellId Local cell ID LTE ANGROUP
ADD
INTERRATHOGER
ANGROUP
LST
INTERRATHOGER
InterRatHoGeranGro ANGROUP
MOD
INTERRATHOGER
ANGROUP
RMV
InterRatHoGeranGr InterRAT handover BTS3900, BTS3900 INTERRATHOGER
oupId to GERAN group ID LTE ANGROUP
InterRatHoGeranGro
ADD
INTERRATHOGER
ANGROUP
MOD
INTERRATHOGER
ANGROUP
LST
InterRatHoGeranB1 GERAN handover BTS3900, BTS3900 INTERRATHOGER
Hyst hysteresis LTE ANGROUP
InterRatHoGeranGro
ADD
INTERRATHOGER
ANGROUP
MOD
INTERRATHOGER
ANGROUP
CoverageBased LST
InterRatHoGeranB1 GERAN trigger BTS3900, BTS3900 INTERRATHOGER
Thd threshold LTE ANGROUP
InterRatHoGeranGro
ADD
INTERRATHOGER
ANGROUP
MOD
INTERRATHOGER
ANGROUP
LST
InterRatHoGeranB1 GERAN time to BTS3900, BTS3900 INTERRATHOGER
TimeToTrig trigger LTE ANGROUP
InterRatHoGeranGro
ADD
INTERRATHOGER
ANGROUP
MOD
INTERRATHOGER
Load Service ANGROUP
Based Geran LST
LdSvBasedHoGera EventB1 trigger BTS3900, BTS3900 INTERRATHOGER
nB1Thd threshold LTE ANGROUP
ADD
INTERRATHOUTR
ANGROUP
LST
INTERRATHOUTR
InterRatHoUtranGro ANGROUP
MOD
INTERRATHOUTR
ANGROUP
RMV
BTS3900, BTS3900 INTERRATHOUTR
LocalCellId Local cell ID LTE ANGROUP
ADD
INTERRATHOUTR
ANGROUP
LST
INTERRATHOUTR
InterRatHoUtranGro ANGROUP
MOD
INTERRATHOUTR
ANGROUP
RMV
InterRatHoUtranGro InterRAT handover BTS3900, BTS3900 INTERRATHOUTR
upId to UTRAN Group ID LTE ANGROUP
InterRatHoUtranGro
ADD
INTERRATHOUTR
ANGROUP
MOD
INTERRATHOUTR
ANGROUP
CoverageBased LST
InterRatHoUtranB1 UTRAN ECN0 BTS3900, BTS3900 INTERRATHOUTR
ThdEcn0 trigger threshold LTE ANGROUP
InterRatHoUtranGro
ADD
INTERRATHOUTR
ANGROUP
MOD
INTERRATHOUTR
ANGROUP
CoverageBased LST
InterRatHoUtranB1 UTRAN RSCP BTS3900, BTS3900 INTERRATHOUTR
ThdRscp trigger threshold LTE ANGROUP
InterRatHoUtranGro
ADD
INTERRATHOUTR
ANGROUP
MOD
INTERRATHOUTR
ANGROUP
LST
InterRatHoUtranB1 UTRAN handover BTS3900, BTS3900 INTERRATHOUTR
Hyst hysteresis LTE ANGROUP
InterRatHoUtranGro
ADD
INTERRATHOUTR
ANGROUP
MOD
INTERRATHOUTR
ANGROUP
LST
InterRatHoUtranB1 UTRAN time to BTS3900, BTS3900 INTERRATHOUTR
TimeToTrig trigger LTE ANGROUP
InterRatHoUtranGro
ADD
INTERRATHOUTR
ANGROUP
MOD
INTERRATHOUTR
ANGROUP
Load Service LST
LdSvBasedHoUtran Based UTRANB1 BTS3900, BTS3900 INTERRATHOUTR
B1ThdEcn0 ECN0 threshold LTE ANGROUP
InterRatHoUtranGro
ADD
INTERRATHOUTR
ANGROUP
MOD
INTERRATHOUTR
Load Service ANGROUP
Based UTRAN LST
LdSvBasedHoUtran EventB1 RSCP BTS3900, BTS3900 INTERRATHOUTR
B1ThdRscp trigger threshold LTE ANGROUP
ADD
INTERFREQHOGR
OUP
LST
INTERFREQHOGR
InterFreqHoGroup OUP
MOD
INTERFREQHOGR
OUP
RMV
BTS3900, BTS3900 INTERFREQHOGR
LocalCellId Local cell ID LTE OUP
ADD
INTERFREQHOGR
OUP
LST
INTERFREQHOGR
MOD
INTERFREQHOGR
OUP
RMV
InterFreqHoGroupI Interfreq handover BTS3900, BTS3900 INTERFREQHOGR
d group ID LTE OUP
InterFreqHoGroup
ADD
INTERFREQHOGR
OUP
MOD
INTERFREQHOGR
OUP
LST
InterFreqHoA1A2H Interfreq A1A2 BTS3900, BTS3900 INTERFREQHOGR
yst hysteresis LTE OUP
InterFreqHoGroup
ADD
INTERFREQHOGR
OUP
MOD
INTERFREQHOGR
OUP
LST
InterFreqHoA1A2Ti Interfreq A1A2 time BTS3900, BTS3900 INTERFREQHOGR
meToTrig to trigger LTE OUP
InterFreqHoGroup
ADD
INTERFREQHOGR
OUP
MOD
INTERFREQHOGR
OUP
LST
InterFreqHoA1Thd Interfreq A1 RSRP BTS3900, BTS3900 INTERFREQHOGR
Rsrp threshold LTE OUP
InterFreqHoGroup
ADD
INTERFREQHOGR
OUP
MOD
INTERFREQHOGR
OUP
LST
InterFreqHoA1Thd Interfreq A1 RSRQ BTS3900, BTS3900 INTERFREQHOGR
Rsrq threshold LTE OUP
InterFreqHoGroup
ADD
INTERFREQHOGR
OUP
MOD
INTERFREQHOGR
OUP
LST
InterFreqHoA2Thd Interfreq A2 RSRP BTS3900, BTS3900 INTERFREQHOGR
InterFreqHoGroup
ADD
INTERFREQHOGR
OUP
MOD
INTERFREQHOGR
OUP
LST
InterFreqHoA2Thd Interfreq A2 RSRQ BTS3900, BTS3900 INTERFREQHOGR
InterFreqHoGroup
ADD
INTERFREQHOGR
OUP
MOD
INTERFREQHOGR
OUP
LST
Interfreq handover BTS3900, BTS3900 INTERFREQHOGR
InterFreqHoA4Hyst hysteresis LTE OUP
InterFreqHoGroup
ADD
INTERFREQHOGR
OUP
MOD
INTERFREQHOGR
OUP
CoverageBased LST
InterFreqHoA4Thd Interfreq RSRP BTS3900, BTS3900 INTERFREQHOGR
InterFreqHoGroup
ADD
INTERFREQHOGR
OUP
MOD
INTERFREQHOGR
OUP
CoverageBased LST
InterFreqHoA4Thd Interfreq RSRQ BTS3900, BTS3900 INTERFREQHOGR
InterFreqHoGroup
ADD
INTERFREQHOGR
OUP
MOD
INTERFREQHOGR
OUP
LST
InterFreqHoA4Time Interfreq HandOver BTS3900, BTS3900 INTERFREQHOGR
ToTrig Time to Trigger LTE OUP
InterFreqHoGroup
ADD
INTERFREQHOGR
OUP
MOD
INTERFREQHOGR
OUP
Load Based LST
InterFreqLoadBase Interfreq RSRP BTS3900, BTS3900 INTERFREQHOGR
dHoA4ThdRsrp threshold LTE OUP
InterFreqHoGroup
ADD
INTERFREQHOGR
OUP
MOD
INTERFREQHOGR
OUP
Load Based LST
InterFreqLoadBase Interfreq RSRQ BTS3900, BTS3900 INTERFREQHOGR
dHoA4ThdRsrq threshold LTE OUP
InterFreqHoGroup
ADD
INTERFREQHOGR
OUP
MOD
INTERFREQHOGR
OUP
Freq Priority Based LST
FreqPriInterFreqHo Interfreq A1 RSRP BTS3900, BTS3900 INTERFREQHOGR
A1ThdRsrp threshold LTE OUP
ADD
InterFreqHoGroup INTERFREQHOGR
OUP
MOD
INTERFREQHOGR
OUP
FreqPriInterFreqHo Interfreq A1 RSRQ BTS3900, BTS3900 INTERFREQHOGR
A1ThdRsrq threshold LTE OUP
InterFreqHoGroup
ADD
INTERFREQHOGR
OUP
MOD
INTERFREQHOGR
OUP
LST
InterFreqHoA3Offse BTS3900, BTS3900 INTERFREQHOGR
t Interfreq A3 offset LTE OUP
InterFreqHoGroup
ADD
INTERFREQHOGR
OUP
MOD
INTERFREQHOGR
OUP
LST
A3InterFreqHoA1T A3 based interfreq BTS3900, BTS3900 INTERFREQHOGR
hdRsrp A1 RSRP threshold LTE OUP
InterFreqHoGroup
ADD
INTERFREQHOGR
OUP
MOD
INTERFREQHOGR
OUP
LST
A3InterFreqHoA2T A3 based Interfreq BTS3900, BTS3900 INTERFREQHOGR
hdRsrp A2 RSRP threshold LTE OUP
ADD
INTERFREQHOGR
MOD
INTERFREQHOGR
OUP
FreqPriInterFreqHo Interfreq A2 RSRP BTS3900, BTS3900 INTERFREQHOGR
A2ThdRsrp threshold LTE OUP
ADD
INTERFREQHOGR
MOD
INTERFREQHOGR
OUP
FreqPriInterFreqHo Interfreq A2 RSRQ BTS3900, BTS3900 INTERFREQHOGR
A2ThdRsrq threshold LTE OUP
ADD
INTRAFREQHOGR
OUP
LST
INTRAFREQHOGR
IntraFreqHoGroup OUP
MOD
INTRAFREQHOGR
OUP
RMV
BTS3900, BTS3900 INTRAFREQHOGR
ADD
INTRAFREQHOGR
OUP
LST
INTRAFREQHOGR
IntraFreqHoGroup OUP
MOD
INTRAFREQHOGR
OUP
RMV
IntraFreqHoGroupI Intrafreq handover BTS3900, BTS3900 INTRAFREQHOGR
d group ID LTE OUP
IntraFreqHoGroup
ADD
INTRAFREQHOGR
OUP
MOD
INTRAFREQHOGR
OUP
LST
Intrafreq handover BTS3900, BTS3900 INTRAFREQHOGR
IntraFreqHoA3Hyst hysteresis LTE OUP
IntraFreqHoGroup
ADD
INTRAFREQHOGR
OUP
MOD
INTRAFREQHOGR
OUP
LST
IntraFreqHoA3Offse Intrafreq handover BTS3900, BTS3900 INTRAFREQHOGR
t offset LTE OUP
IntraFreqHoGroup
ADD
INTRAFREQHOGR
OUP
MOD
INTRAFREQHOGR
OUP
LST
IntraFreqHoA3Time Intrafreq handover BTS3900, BTS3900 INTRAFREQHOGR
ToTrig time to trigger LTE OUP
LST
ENBCELLQCIRSV
eNBCellQciRsvdPar DPARA
MOD
BTS3900, BTS3900 ENBCELLQCIRSV
LocalCellId Local cell ID LTE DPARA
eNBCellQciRsvdPar
LST
ENBCELLQCIRSV
DPARA
MOD
QoS Class BTS3900, BTS3900 ENBCELLQCIRSV
Qci Indication LTE DPARA
eNBCellQciRsvdPar
MOD
ENBCELLQCIRSV
DPARA
LST
Reserved Switch BTS3900, BTS3900 ENBCELLQCIRSV
eNBCellQciRsvdPar
MOD
ENBCELLQCIRSV
DPARA
LST
eNBCellQciRsvdPar
MOD
ENBCELLQCIRSV
DPARA
LST
eNBCellQciRsvdPar
MOD
ENBCELLQCIRSV
DPARA
LST
Reserved BTS3900, BTS3900 ENBCELLQCIRSV
eNBCellQciRsvdPar
MOD
ENBCELLQCIRSV
DPARA
LST
eNBCellQciRsvdPar
MOD
ENBCELLQCIRSV
DPARA
LST
eNBCellQciRsvdPar
MOD
ENBCELLQCIRSV
DPARA
LST
eNBCellQciRsvdPar
MOD
ENBCELLQCIRSV
DPARA
LST
eNBCellQciRsvdPar
MOD
ENBCELLQCIRSV
DPARA
LST
eNBCellQciRsvdPar
MOD
ENBCELLQCIRSV
DPARA
LST
eNBCellQciRsvdPar
MOD
ENBCELLQCIRSV
DPARA
LST
eNBCellQciRsvdPar
MOD
ENBCELLQCIRSV
DPARA
LST
eNBCellQciRsvdPar
MOD
ENBCELLQCIRSV
DPARA
LST
eNBCellQciRsvdPar
MOD
ENBCELLQCIRSV
DPARA
LST
eNBCellQciRsvdPar
MOD
ENBCELLQCIRSV
DPARA
LST
eNBCellQciRsvdPar
MOD
ENBCELLQCIRSV
DPARA
LST
eNBCellQciRsvdPar
MOD
ENBCELLQCIRSV
DPARA
LST
eNBCellQciRsvdPar
MOD
ENBCELLQCIRSV
DPARA
LST
eNBCellQciRsvdPar
MOD
ENBCELLQCIRSV
DPARA
LST
eNBCellQciRsvdPar
MOD
ENBCELLQCIRSV
DPARA
LST
eNBCellQciRsvdPar
MOD
ENBCELLQCIRSV
DPARA
LST
eNBCellQciRsvdPar
MOD
ENBCELLQCIRSV
DPARA
LST
eNBCellQciRsvdPar
MOD
ENBCELLQCIRSV
DPARA
LST
ADD
CNOPERATOR
LST
CNOPERATOR
CnOperator MOD
CNOPERATOR
CnOperatorId CN Operator ID LTE CNOPERATOR
CnOperator
ADD
CNOPERATOR
MOD
CNOPERATOR
CnOperatorName CN Operator name LTE CNOPERATOR
CnOperator
ADD
CNOPERATOR
MOD
CNOPERATOR
CnOperatorType CN Operator type LTE CNOPERATOR
ADD
CnOperator CNOPERATOR
MOD
CNOPERATOR
Mobile country BTS3900, BTS3900 LST
Mcc code LTE CNOPERATOR
CnOperator ADD
CNOPERATOR
MOD
CNOPERATOR
Mobile network BTS3900, BTS3900 LST
Mnc code LTE CNOPERATOR
ADD
CNOPERATORIPP
ATH
LST
CNOPERATORIPP
CnOperatorIpPath ATH
MOD
CNOPERATORIPP
ATH
RMV
BTS3900, BTS3900 CNOPERATORIPP
IpPathId IP path ID LTE ATH
ADD
CNOPERATORIPP
ATH
MOD
CnOperatorIpPath CNOPERATORIPP
ATH
LST
BTS3900, BTS3900 CNOPERATORIPP
CnOperatorId CN Operator ID LTE ATH
CnOperatorTa
ADD
CNOPERATORTA
LST
CNOPERATORTA
MOD
CNOPERATORTA
Local tracking area BTS3900, BTS3900 RMV
TrackingAreaId ID LTE CNOPERATORTA
ADD
CNOPERATORTA
CnOperatorTa MOD
CNOPERATORTA
CnOperatorId CN Operator ID LTE CNOPERATORTA
CnOperatorTa
ADD
CNOPERATORTA
MOD
CNOPERATORTA
Tac Tracking area code LTE CNOPERATORTA
Emc
BTS3900, BTS3900 LST EMC

CnOperatorId CN Operator ID LTE MOD EMC
Emc
Emergency call BTS3900, BTS3900 MOD EMC

EmcEnable enabled switch LTE LST EMC
Emc
Emergency call
EmcEnableInLimite enabled switch in BTS3900, BTS3900 MOD EMC
dMode limited mode LTE LST EMC
Emc
EmcDedicatedBear The ARP of EMC BTS3900, BTS3900 MOD EMC

erARP dedicated bearer LTE LST EMC
Emc
EmcDefaultBearerA The ARP of EMC BTS3900, BTS3900 MOD EMC

RP default bearer LTE LST EMC
eNodeBChrOutputCtr
MOD
ENODEBCHROUT
PUTCTRL
LST
BTS3900, BTS3900 ENODEBCHROUT
OutPutMode CHR Output Mode LTE PUTCTRL
eNodeBChrOutputCtr
MOD
ENODEBCHROUT
PUTCTRL
LST
Sample Rate of BTS3900, BTS3900 ENODEBCHROUT
CallSampleRate Abnomal Call LTE PUTCTRL
eNodeBChrOutputCtr
MOD
ENODEBCHROUT
PUTCTRL
LST
BTS3900, BTS3900 ENODEBCHROUT
MaxStoreCall Max Store Call LTE PUTCTRL
ENodeBSharingMod MOD
ENODEBSHARING
MODE
LST
ENodeBSharingMo eNodeB sharing BTS3900, BTS3900 ENODEBSHARING
de mode LTE MODE
MOD
GLOBALPROCSWI
GlobalProcSwitch TCH
LST
The Switch of X2 BTS3900, BTS3900 GLOBALPROCSWI
X2SonSetupSwitch setup by SON LTE TCH
GlobalProcSwitch
MOD
GLOBALPROCSWI
TCH
LST
X2SonLinkSetupTy The method of X2 BTS3900, BTS3900 GLOBALPROCSWI
pe setup by SON LTE TCH
GlobalProcSwitch
MOD
GLOBALPROCSWI
TCH
LST
BTS3900, BTS3900 GLOBALPROCSWI
SriAdaptiveSwitch SRI adaptive switch LTE TCH
GlobalProcSwitch
MOD
GLOBALPROCSWI
TCH
LST
LcgProfile LCG Profile LTE TCH
GlobalProcSwitch
MOD
GLOBALPROCSWI
TCH
LST
RncPoolHoRimSwit RNC POOL HO BTS3900, BTS3900 GLOBALPROCSWI
ch RIM Switch LTE TCH
GlobalProcSwitch
MOD
GLOBALPROCSWI
TCH
UU Message LST
UuMsgSimulSendS Simultaneous BTS3900, BTS3900 GLOBALPROCSWI
witch Sending Switch LTE TCH
GlobalProcSwitch
MOD
GLOBALPROCSWI
TCH
Update eNB LST
X2BasedUptENode Configuration Via BTS3900, BTS3900 GLOBALPROCSWI
BCfgSwitch X2 Switch LTE TCH
MOD
GLOBALPROCSWI
GlobalProcSwitch TCH
X2 Auto Setup LST
TargetOpBasedX2S Switch Via Target BTS3900, BTS3900 GLOBALPROCSWI
witch Operator LTE TCH
GlobalProcSwitch
MOD
GLOBALPROCSWI
TCH
LST
X2SonTNLSelectM X2 Son TNL Select BTS3900, BTS3900 GLOBALPROCSWI
ode Mode LTE TCH
GlobalProcSwitch
MOD
GLOBALPROCSWI
TCH
Choose UMTS Cell LST
UtranLoadTransCh Load Info Trans BTS3900, BTS3900 GLOBALPROCSWI
an Channel LTE TCH
GlobalProcSwitch
MOD
GLOBALPROCSWI
TCH
S1 handover in LST
S1HoInDataFwdSwi data forwarding BTS3900, BTS3900 GLOBALPROCSWI
tch switch LTE TCH
GlobalProcSwitch
MOD
GLOBALPROCSWI
TCH
LST
RrcReestProtectTh RRC Reest Protect BTS3900, BTS3900 GLOBALPROCSWI
d Threshold LTE TCH
GlobalProcSwitch
MOD
GLOBALPROCSWI
TCH
LST
The Timer of X2 BTS3900, BTS3900 GLOBALPROCSWI
X2SonDeleteTimer delete by SON LTE TCH
GlobalProcSwitch
MOD
GLOBALPROCSWI
TCH
LST
RimCodingPolicy RIM Coding Policy LTE TCH
GlobalProcSwitch
MOD
GLOBALPROCSWI
TCH
L2GU Handover LST
L2GUHoWithLCapS Required With LTE BTS3900, BTS3900 GLOBALPROCSWI
witch Cap Switch LTE TCH
GlobalProcSwitch
MOD
GLOBALPROCSWI
TCH
Different Operator LST
DiffOpWithSameM With Same MMEC BTS3900, BTS3900 GLOBALPROCSWI
mecSwitch Switch LTE TCH
ADD
LICENSESHARING
POLICY
LST
LICENSESHARING
LicenseSharingPolic POLICY
MOD
LICENSESHARING
POLICY
RMV
BTS3900, BTS3900 LICENSESHARING
CnOperatorId CN Operator ID LTE POLICY
LicenseSharingPolic ADD
LICENSESHARING
POLICY
MOD
LICENSESHARING
POLICY
The proportion of LST
the maximum BTS3900, BTS3900 LICENSESHARING
MaxUserNumRate number of users LTE POLICY
ADD
LICENSESHARING
LicenseSharingPolic POLICY
MOD
LICENSESHARING
POLICY
The proportion of LST
UserNumSharingRa the sharing number BTS3900, BTS3900 LICENSESHARING
te of users LTE POLICY
S1ReestTimer
MOD
S1REESTTIMER
S1 reestablish min BTS3900, BTS3900 LST
S1ReestMinTimer timer length LTE S1REESTTIMER
S1ReestTimer
MOD
S1REESTTIMER
S1 reestablish max BTS3900, BTS3900 LST
S1ReestMaxTimer timer length LTE S1REESTTIMER
LST
ENBCNOPRSVDP
eNBCnOpRsvdPara ARA
MOD
BTS3900, BTS3900 ENBCNOPRSVDP
CnOperatorId CN Operator ID LTE ARA
eNBCnOpRsvdPara
MOD
ENBCNOPRSVDP
ARA
LST
Reserved Switch BTS3900, BTS3900 ENBCNOPRSVDP
RsvdSwPara0 Parameter 0 LTE ARA
eNBCnOpRsvdPara
MOD
ENBCNOPRSVDP
ARA
LST
eNBCnOpRsvdPara
MOD
ENBCNOPRSVDP
ARA
LST
eNBCnOpRsvdPara
MOD
ENBCNOPRSVDP
ARA
LST
Reserved BTS3900, BTS3900 ENBCNOPRSVDP
RsvdPara2 Parameter 2 LTE ARA
eNBCnOpRsvdPara
MOD
ENBCNOPRSVDP
ARA
LST
eNBCnOpRsvdPara
MOD
ENBCNOPRSVDP
ARA
LST
eNBCnOpRsvdPara
MOD
ENBCNOPRSVDP
ARA
LST
eNBCnOpRsvdPara
MOD
ENBCNOPRSVDP
ARA
LST
eNBCnOpRsvdPara
MOD
ENBCNOPRSVDP
ARA
LST
eNBCnOpRsvdPara
MOD
ENBCNOPRSVDP
ARA
LST
eNBCnOpRsvdPara
MOD
ENBCNOPRSVDP
ARA
LST
eNBCnOpRsvdPara
MOD
ENBCNOPRSVDP
ARA
LST
eNBCnOpRsvdPara
MOD
ENBCNOPRSVDP
ARA
LST
eNBCnOpRsvdPara
MOD
ENBCNOPRSVDP
ARA
LST
eNBCnOpRsvdPara
MOD
ENBCNOPRSVDP
ARA
LST
eNBCnOpRsvdPara
MOD
ENBCNOPRSVDP
ARA
LST
eNBCnOpRsvdPara
MOD
ENBCNOPRSVDP
ARA
LST
eNBCnOpRsvdPara
MOD
ENBCNOPRSVDP
ARA
LST
eNBCnOpRsvdPara
MOD
ENBCNOPRSVDP
ARA
LST
eNBCnOpRsvdPara
MOD
ENBCNOPRSVDP
ARA
LST
eNBCnOpRsvdPara
MOD
ENBCNOPRSVDP
ARA
LST
eNBCnOpRsvdPara
MOD
ENBCNOPRSVDP
ARA
LST
eNBCnOpRsvdPara
MOD
ENBCNOPRSVDP
ARA
LST
ADD
ENODEBPATH
eNodeBPath LST ENODEBPATH
MOD
ENODEBPATH
IpPathId IP Path ID LTE ENODEBPATH
eNodeBPath ADD
ENODEBPATH
MOD
BTS3900, BTS3900 ENODEBPATH
AppType Application Type LTE LST ENODEBPATH
eNodeBPath
ADD
ENODEBPATH
MOD
S1InterfaceId S1 Interface ID LTE LST ENODEBPATH
eNodeBPath
ADD
ENODEBPATH
MOD
X2InterfaceId X2 Interface ID LTE LST ENODEBPATH
ADD S1
S1 DSP S1
LST S1
BTS3900, BTS3900 MOD S1
S1Id S1 ID LTE RMV S1
S1
ADD S1
MOD S1
BTS3900, BTS3900 DSP S1
CnOperatorId CN Operator ID LTE LST S1
S1
ADD S1
Control Plane End BTS3900, BTS3900 MOD S1
CpEpGroupId Point Group ID LTE LST S1
S1
ADD S1
User Plane End BTS3900, BTS3900 MOD S1
UpEpGroupId Point Group ID LTE LST S1
S1
ADD S1
MmeRelease MME Release LTE LST S1
S1
ADD S1
UserLabel User Label LTE LST S1
S1
ADD S1
End Point Group BTS3900, BTS3900 MOD S1
EpGroupCfgFlag Config Flag LTE LST S1
S1
ADD S1
MOD S1
MME Selection BTS3900, BTS3900 DSP S1
Priority Priority LTE LST S1
BTS3900, BTS3900
S1
S1InterfaceId S1 Interface ID LTE DSP S1
S1 BTS3900, BTS3900
S1InterfaceState S1 Interface State LTE DSP S1
S1
S1 Interface Is BTS3900, BTS3900

S1InterfaceIsBlock Block LTE DSP S1
S1
S1 Interface CP BTS3900, BTS3900
S1CpBearerId Bearer ID LTE DSP S1
S1
S1 Interface CP BTS3900, BTS3900
S1CpBearerState Bearer State LTE DSP S1
S1INTERFACE
BLK
S1INTERFACE
DSP
S1INTERFACE
MOD
S1Interface S1INTERFACE
RMV
S1INTERFACE
RST
S1INTERFACE
BTS3900, BTS3900 UBL
S1InterfaceId S1 Interface ID LTE S1INTERFACE
ADD
S1INTERFACE
S1Interface MOD
S1INTERFACE
S1 Interface CP BTS3900, BTS3900 DSP
S1CpBearerId Bearer ID LTE S1INTERFACE
ADD
S1INTERFACE
S1Interface MOD
S1INTERFACE
CnOperatorId CN Operator ID LTE S1INTERFACE
S1Interface
ADD
S1INTERFACE
MOD
S1INTERFACE
MmeRelease MME Release LTE S1INTERFACE
S1Interface
ADD
S1INTERFACE
MOD
S1INTERFACE
S1 Interface Is BTS3900, BTS3900 DSP
S1InterfaceIsBlock Blocked LTE S1INTERFACE
S1Interface
ADD
S1INTERFACE
MOD
S1INTERFACE
CtrlMode Control Mode LTE S1INTERFACE
S1Interface

AutoCfgFlag Auto Config Flag LTE S1INTERFACE
S1Interface
ADD
S1INTERFACE
MOD
S1INTERFACE
MME Selection BTS3900, BTS3900 DSP
Priority Priority LTE S1INTERFACE
S1Interface BTS3900, BTS3900 DSP

S1InterfaceState S1 Interface State LTE S1INTERFACE
S1Interface
S1CpBearerState S1 CP Bearer State LTE S1INTERFACE
S1Interface

MmeIsOverLoad MME Is Overloaded LTE S1INTERFACE
S1Interface
S1InterfaceUserNu S1 Interface User BTS3900, BTS3900 DSP
m Number LTE S1INTERFACE
S1Interface

MmeName MME Name LTE S1INTERFACE
S1Interface

ServedPlmns Served PLMNs LTE S1INTERFACE
S1Interface

ServedGummeis Served GUMMEIs LTE S1INTERFACE
S1Interface
MME Relative BTS3900, BTS3900 DSP

RelativeMmeCap Capacity LTE S1INTERFACE
S1Interface
S1 Interface Fault BTS3900, BTS3900 DSP

S1LinkFaultReason Reason LTE S1INTERFACE
LST
MMEFEATURECF
MmeFeatureCfg G
MOD
BTS3900, BTS3900 MMEFEATURECF
S1InterfaceId S1Interface ID LTE G
MmeFeatureCfg
MOD
MMEFEATURECF
G
LST
MME supporting BTS3900, BTS3900 MMEFEATURECF
MdtEnable MDT or not LTE G
ADD X2
X2 DSP X2
LST X2
BTS3900, BTS3900 MOD X2
X2Id X2 ID LTE RMV X2
X2
ADD X2
MOD X2
BTS3900, BTS3900 DSP X2
CnOperatorId CN Operator ID LTE LST X2
X2
ADD X2
Control Plane End BTS3900, BTS3900 MOD X2
CpEpGroupId Point Group ID LTE LST X2
X2
ADD X2
User Plane End BTS3900, BTS3900 MOD X2
UpEpGroupId Point Group ID LTE LST X2
X2
ADD X2
TargetENodeBRele Target eNodeB BTS3900, BTS3900 MOD X2
ase Release LTE LST X2
X2
ADD X2
BTS3900, BTS3900 MOD X2
UserLabel User Label LTE LST X2
X2
ADD X2
End Point Group BTS3900, BTS3900 MOD X2
EpGroupCfgFlag Config Flag LTE LST X2
X2 X2 Interface CP BTS3900, BTS3900

X2CpBearerState Bearer State LTE DSP X2
BTS3900, BTS3900
X2
X2InterfaceId X2 Interface ID LTE DSP X2
X2 BTS3900, BTS3900
X2InterfaceState X2 Interface State LTE DSP X2
X2 X2 Interface CP BTS3900, BTS3900

X2CpBearerId Bearer ID LTE DSP X2
ADD
X2BLACKWHITELI
X2BlackWhiteList ST
RMV
X2BLACKWHITELI
ST
LST
Mobile country BTS3900, BTS3900 X2BLACKWHITELI
Mcc code LTE ST
ADD
X2BLACKWHITELI
X2BlackWhiteList ST
RMV
X2BLACKWHITELI
ST
LST
Mobile network BTS3900, BTS3900 X2BLACKWHITELI
Mnc code LTE ST
ADD
X2BLACKWHITELI
ST
RMV
X2BlackWhiteList X2BLACKWHITELI
ST
LST
BTS3900, BTS3900 X2BLACKWHITELI
ENodeBId eNodeB ID LTE ST
X2BlackWhiteList
ADD
X2BLACKWHITELI
ST
LST
X2 Black or White BTS3900, BTS3900 X2BLACKWHITELI
X2ListType List Type LTE ST
DSP
X2INTERFACE
MOD
X2INTERFACE
X2Interface RMV
X2INTERFACE
BTS3900, BTS3900 RST
X2InterfaceId X2Interface ID LTE X2INTERFACE
ADD
X2INTERFACE
X2Interface MOD
X2INTERFACE
X2 Interface CP BTS3900, BTS3900 DSP
X2CpBearerId Bearer ID LTE X2INTERFACE
ADD
X2INTERFACE
X2Interface MOD
X2INTERFACE
CnOperatorId CN Operator ID LTE X2INTERFACE
ADD
X2INTERFACE
X2Interface MOD
X2INTERFACE
TargetENodeBRele Target eNodeB BTS3900, BTS3900 DSP
ase release LTE X2INTERFACE
X2Interface
ADD
X2INTERFACE
MOD
X2INTERFACE
Automatic removal BTS3900, BTS3900 DSP
NoAutoRmvFlag flag LTE X2INTERFACE
X2Interface
ADD
X2INTERFACE
MOD
X2INTERFACE
CtrlMode Control Mode LTE X2INTERFACE
X2Interface

AutoCfgFlag Auto Config Flag LTE X2INTERFACE
X2Interface
Neighbor eNodeB BTS3900, BTS3900 DSP

NbrENodeBId ID LTE X2INTERFACE
X2Interface
Neighbor eNodeB BTS3900, BTS3900 DSP

NbrENodeBPlmnId PLMN ID LTE X2INTERFACE
X2Interface

X2InterfaceState X2Interface state LTE X2INTERFACE
X2Interface
X2AbnormalReaso X2Interface state BTS3900, BTS3900 DSP

n abnormal reason LTE X2INTERFACE
Drx
BTS3900, BTS3900 MOD DRX

DrxAlgSwitch DRX switch LTE LST DRX
Drx
Short-cycle DRX BTS3900, BTS3900 MOD DRX

ShortDrxSwitch switch LTE LST DRX
Drx
LongDrxCycleSpeci Special long DRX BTS3900, BTS3900 MOD DRX

al cycle LTE LST DRX
Drx
OnDurationTimerSp Special On BTS3900, BTS3900 MOD DRX

ecial Duration timer LTE LST DRX
Drx
DrxInactivityTimerS Special DRX BTS3900, BTS3900 MOD DRX

pecial inactivity timer LTE LST DRX
Drx
Special short-cycle
SupportShortDrxSp DRX supported BTS3900, BTS3900 MOD DRX
ecial indication LTE LST DRX
Drx
ShortDrxCycleSpeci Special short DRX BTS3900, BTS3900 MOD DRX

al cycle LTE LST DRX
Drx
DrxShortCycleTimer Special DRX short BTS3900, BTS3900 MOD DRX

Special cycle timer LTE LST DRX
Drx
LongDrxCycleForA Long DRX Cycle for BTS3900, BTS3900 MOD DRX

nr ANR LTE LST DRX
Drx
LongDRXCycleforI Long DRX Cycle for BTS3900, BTS3900 MOD DRX

RatAnr Inter-RAT ANR LTE LST DRX
ADD
EXTENDEDQCI
LST
EXTENDEDQCI
ExtendedQci MOD
EXTENDEDQCI
Extended QoS BTS3900, BTS3900 RMV
ExtendedQci Class Identifier LTE EXTENDEDQCI
ExtendedQci
ADD
EXTENDEDQCI
MOD
EXTENDEDQCI
ServiceType Service type LTE EXTENDEDQCI
ExtendedQci
ADD
EXTENDEDQCI
MOD
EXTENDEDQCI
Uplink scheduling BTS3900, BTS3900 LST
UlschPriorityFactor priority factor LTE EXTENDEDQCI
ExtendedQci
ADD
EXTENDEDQCI
MOD
Downlink EXTENDEDQCI
scheduling priority BTS3900, BTS3900 LST
DlschPriorityFactor factor LTE EXTENDEDQCI
ExtendedQci
ADD
EXTENDEDQCI
MOD
EXTENDEDQCI
UlMinGbr Uplink MinGBR LTE EXTENDEDQCI
ExtendedQci
ADD
EXTENDEDQCI
MOD
EXTENDEDQCI
DlMinGbr Downlink MinGBR LTE EXTENDEDQCI
ExtendedQci
ADD
EXTENDEDQCI
MOD
EXTENDEDQCI
PreAllocationWeigh Pre-allocation BTS3900, BTS3900 LST
t weight LTE EXTENDEDQCI
ExtendedQci
ADD
EXTENDEDQCI
MOD
EXTENDEDQCI
InterRatPolicyCfgGr InterRAT policy BTS3900, BTS3900 LST
oupId config group ID LTE EXTENDEDQCI
ExtendedQci
ADD
EXTENDEDQCI
MOD
EXTENDEDQCI
PrioritisedBitRate Prioritised bit rate LTE EXTENDEDQCI
ExtendedQci
ADD
EXTENDEDQCI
MOD
EXTENDEDQCI
LogicalChannelPrio Logical channel BTS3900, BTS3900 LST
rity priority LTE EXTENDEDQCI
ADD
EXTENDEDQCI
MOD
ExtendedQci EXTENDEDQCI
RlcPdcpParaGroupI RLC PDCP BTS3900, BTS3900 LST
d parameter group ID LTE EXTENDEDQCI
ADD
EXTENDEDQCI
MOD
ExtendedQci EXTENDEDQCI
FreeUserFlag Free user flag LTE EXTENDEDQCI
ExtendedQci
ADD
EXTENDEDQCI
MOD
EXTENDEDQCI
FlowCtrlType Flow Control Type LTE EXTENDEDQCI
ADD
INTERRATPOLICY
CFGGROUP
LST
InterRatPolicyCfgGr INTERRATPOLICY
CFGGROUP
MOD
INTERRATPOLICY
CFGGROUP
RMV
InterRatPolicyCfgGr InterRAT policy BTS3900, BTS3900 INTERRATPOLICY
oupId config group ID LTE CFGGROUP
InterRatPolicyCfgGr ADD
INTERRATPOLICY
CFGGROUP
MOD
INTERRATPOLICY
CFGGROUP
LST
UTRAN handover BTS3900, BTS3900 INTERRATPOLICY
UtranHoCfg policy Configuration LTE CFGGROUP
InterRatPolicyCfgGr
ADD
INTERRATPOLICY
CFGGROUP
MOD
INTERRATPOLICY
CFGGROUP
GERAN GSM LST
handover policy BTS3900, BTS3900 INTERRATPOLICY
GeranGsmHoCfg Configuration LTE CFGGROUP
InterRatPolicyCfgGr
ADD
INTERRATPOLICY
CFGGROUP
MOD
INTERRATPOLICY
CFGGROUP
GERAN GPRS LST
GeranGprsEdgeHo EDGE handover BTS3900, BTS3900 INTERRATPOLICY
Cfg policy Configuration LTE CFGGROUP
InterRatPolicyCfgGr ADD
INTERRATPOLICY
CFGGROUP
MOD
INTERRATPOLICY
CFGGROUP
CDMA2000 1XRTT LST
Cdma1xRttHoCfg Configuration LTE CFGGROUP
InterRatPolicyCfgGr
ADD
INTERRATPOLICY
CFGGROUP
MOD
INTERRATPOLICY
CFGGROUP
CDMA2000 HRPD LST
CdmaHrpdHoCfg Configuration LTE CFGGROUP
InterRatPolicyCfgGr
ADD
INTERRATPOLICY
CFGGROUP
MOD
INTERRATPOLICY
CFGGROUP
LST
BTS3900, BTS3900 INTERRATPOLICY
NoHoFlag No handover flag LTE CFGGROUP
ADD
INTERRATPOLICY
InterRatPolicyCfgGr CFGGROUP
MOD
INTERRATPOLICY
CFGGROUP
LST
BTS3900, BTS3900 INTERRATPOLICY
NoFastAnrFlag No fast ANR flag LTE CFGGROUP
PuschParam
MOD
PUSCHPARAM
Delta Offset CQI BTS3900, BTS3900 LST
DeltaOffsetCqiIndex Index LTE PUSCHPARAM
PuschParam
MOD
PUSCHPARAM
Delta Offset RI BTS3900, BTS3900 LST
DeltaOffsetRiIndex Index LTE PUSCHPARAM
PuschParam
MOD
PUSCHPARAM
DeltaOffsetAckInde Delta Offset BTS3900, BTS3900 LST
x Acknowledge Index LTE PUSCHPARAM
ADD
RLCPDCPPARAGR
OUP
LST
RLCPDCPPARAGR
RlcPdcpParaGroup OUP
MOD
RLCPDCPPARAGR
OUP
RMV
RlcPdcpParaGroupI RLC PDCP BTS3900, BTS3900 RLCPDCPPARAGR
d parameter group ID LTE OUP
RlcPdcpParaGroup
ADD
RLCPDCPPARAGR
OUP
MOD
RLCPDCPPARAGR
OUP
LST
BTS3900, BTS3900 RLCPDCPPARAGR
DiscardTimer Discard timer LTE OUP
RlcPdcpParaGroup
ADD
RLCPDCPPARAGR
OUP
MOD
RLCPDCPPARAGR
OUP
LST
RLC-UM or RLC- BTS3900, BTS3900 RLCPDCPPARAGR
RlcMode AM mode LTE OUP
RlcPdcpParaGroup
ADD
RLCPDCPPARAGR
OUP
MOD
RLCPDCPPARAGR
OUP
LST
UeMaxRetxThresho MaxretxThreshold BTS3900, BTS3900 RLCPDCPPARAGR
ld for UE LTE OUP
RlcPdcpParaGroup
ADD
RLCPDCPPARAGR
OUP
MOD
RLCPDCPPARAGR
OUP
LST
ENodeBMaxRetxTh MaxRetxThreshold BTS3900, BTS3900 RLCPDCPPARAGR
reshold for eNodeB LTE OUP
RlcPdcpParaGroup
ADD
RLCPDCPPARAGR
OUP
MOD
RLCPDCPPARAGR
OUP
LST
UePollByte PollByte for UE LTE OUP
RlcPdcpParaGroup
ADD
RLCPDCPPARAGR
OUP
MOD
RLCPDCPPARAGR
OUP
LST
PollByte for BTS3900, BTS3900 RLCPDCPPARAGR
ENodeBPollByte eNodeB LTE OUP
RlcPdcpParaGroup
ADD
RLCPDCPPARAGR
OUP
MOD
RLCPDCPPARAGR
OUP
LST
UePollPdu PollPdu for UE LTE OUP
RlcPdcpParaGroup
ADD
RLCPDCPPARAGR
OUP
MOD
RLCPDCPPARAGR
OUP
LST
ENodeBPollPdu PollPdu for eNodeB LTE OUP
RlcPdcpParaGroup
ADD
RLCPDCPPARAGR
OUP
MOD
RLCPDCPPARAGR
OUP
LST
UePollRetransmitTi Poll retransmit timer BTS3900, BTS3900 RLCPDCPPARAGR
mer for UE LTE OUP
RlcPdcpParaGroup
ADD
RLCPDCPPARAGR
OUP
MOD
RLCPDCPPARAGR
OUP
LST
ENodeBPollRetrans Poll retransmit timer BTS3900, BTS3900 RLCPDCPPARAGR
mitTimer for eNodeB LTE OUP
RlcPdcpParaGroup
ADD
RLCPDCPPARAGR
OUP
MOD
RLCPDCPPARAGR
OUP
LST
UeStatusProhibitTi Status prohibit timer BTS3900, BTS3900 RLCPDCPPARAGR
mer for UE LTE OUP
RlcPdcpParaGroup
ADD
RLCPDCPPARAGR
OUP
MOD
RLCPDCPPARAGR
OUP
LST
ENodeBStatusProhi Status prohibit timer BTS3900, BTS3900 RLCPDCPPARAGR
bitTimer for eNodeB LTE OUP
RlcPdcpParaGroup
ADD
RLCPDCPPARAGR
OUP
MOD
RLCPDCPPARAGR
OUP
LST
UeAmReorderingTi AM reordering timer BTS3900, BTS3900 RLCPDCPPARAGR
mer for UE LTE OUP
RlcPdcpParaGroup
ADD
RLCPDCPPARAGR
OUP
MOD
RLCPDCPPARAGR
OUP
LST
ENodeBAmReorder AM reordering timer BTS3900, BTS3900 RLCPDCPPARAGR
ingTimer for eNodeB LTE OUP
RlcPdcpParaGroup ADD
RLCPDCPPARAGR
OUP
MOD
RLCPDCPPARAGR
OUP
LST
PdcpSnSize UM PDCP-SN size LTE OUP
ADD
RlcPdcpParaGroup RLCPDCPPARAGR
OUP
MOD
RLCPDCPPARAGR
OUP
LST
UlRlcSnSize Uplink RLC-Sn size LTE OUP
ADD
RlcPdcpParaGroup RLCPDCPPARAGR
OUP
MOD
RLCPDCPPARAGR
OUP
LST
Downlink RLC-SN BTS3900, BTS3900 RLCPDCPPARAGR
DlRlcSnSize size LTE OUP
RlcPdcpParaGroup
ADD
RLCPDCPPARAGR
OUP
MOD
RLCPDCPPARAGR
OUP
LST
UeUmReorderingTi UM reordering timer BTS3900, BTS3900 RLCPDCPPARAGR
mer for UE LTE OUP
RlcPdcpParaGroup
ADD
RLCPDCPPARAGR
OUP
MOD
RLCPDCPPARAGR
OUP
LST
ENodeBUmReorder UM reordering timer BTS3900, BTS3900 RLCPDCPPARAGR
ingTimer for eNodeB LTE OUP
ADD
RLCPDCPPARAGR
RlcPdcpParaGroup OUP
MOD
RLCPDCPPARAGR
OUP
AM PDCP status LST
report required BTS3900, BTS3900 RLCPDCPPARAGR
PdcpStatusRptReq indication LTE OUP
StandardQci
LST
STANDARDQCI
QoS Class BTS3900, BTS3900 MOD
Qci Indication LTE STANDARDQCI
StandardQci
MOD
STANDARDQCI
UlschPriorityFactor Ulsch priority factor LTE STANDARDQCI
StandardQci
MOD
STANDARDQCI
DlschPriorityFactor Dlsch priority factor LTE STANDARDQCI
StandardQci
MOD
STANDARDQCI
UlMinGbr Uplink MinGBR LTE STANDARDQCI
StandardQci
MOD
STANDARDQCI
DlMinGbr Downlink MinGBR LTE STANDARDQCI
StandardQci
MOD
STANDARDQCI
PreAllocationWeigh Pre-allocation BTS3900, BTS3900 LST
t weight LTE STANDARDQCI
StandardQci
MOD
STANDARDQCI
InterRatPolicyCfgGr InterRAT policy BTS3900, BTS3900 LST
oupId config group ID LTE STANDARDQCI
MOD
StandardQci STANDARDQCI
RlcPdcpParaGroupI RLC PDCP BTS3900, BTS3900 LST
d parameter group ID LTE STANDARDQCI
StandardQci
MOD
STANDARDQCI
PrioritisedBitRate Prioritised bit rate LTE STANDARDQCI
StandardQci
MOD
STANDARDQCI
LogicalChannelPrio Logical channel BTS3900, BTS3900 LST
rity priority LTE STANDARDQCI
StandardQci
MOD
STANDARDQCI
FlowCtrlType Flow control type LTE STANDARDQCI
eNBQciRsvdPara
LST
ENBQCIRSVDPAR
A
MOD
QoS Class BTS3900, BTS3900 ENBQCIRSVDPAR
Qci Indication LTE A
eNBQciRsvdPara
MOD
ENBQCIRSVDPAR
A
LST
Reserved Switch BTS3900, BTS3900 ENBQCIRSVDPAR
RsvdSwPara0 Parameter 0 LTE A
eNBQciRsvdPara
MOD
ENBQCIRSVDPAR
A
LST
eNBQciRsvdPara
MOD
ENBQCIRSVDPAR
A
LST
eNBQciRsvdPara
MOD
ENBQCIRSVDPAR
A
LST
Reserved BTS3900, BTS3900 ENBQCIRSVDPAR
RsvdPara2 Parameter 2 LTE A
eNBQciRsvdPara
MOD
ENBQCIRSVDPAR
A
LST
eNBQciRsvdPara
MOD
ENBQCIRSVDPAR
A
LST
eNBQciRsvdPara
MOD
ENBQCIRSVDPAR
A
LST
eNBQciRsvdPara
MOD
ENBQCIRSVDPAR
A
LST
eNBQciRsvdPara
MOD
ENBQCIRSVDPAR
A
LST
eNBQciRsvdPara
MOD
ENBQCIRSVDPAR
A
LST
eNBQciRsvdPara
MOD
ENBQCIRSVDPAR
A
LST
eNBQciRsvdPara
MOD
ENBQCIRSVDPAR
A
LST
eNBQciRsvdPara
MOD
ENBQCIRSVDPAR
A
LST
eNBQciRsvdPara
MOD
ENBQCIRSVDPAR
A
LST
eNBQciRsvdPara
MOD
ENBQCIRSVDPAR
A
LST
eNBQciRsvdPara
MOD
ENBQCIRSVDPAR
A
LST
eNBQciRsvdPara
MOD
ENBQCIRSVDPAR
A
LST
eNBQciRsvdPara
MOD
ENBQCIRSVDPAR
A
LST
eNBQciRsvdPara
MOD
ENBQCIRSVDPAR
A
LST
eNBQciRsvdPara
MOD
ENBQCIRSVDPAR
A
LST
eNBQciRsvdPara
MOD
ENBQCIRSVDPAR
A
LST
eNBQciRsvdPara
MOD
ENBQCIRSVDPAR
A
LST
eNBQciRsvdPara
MOD
ENBQCIRSVDPAR
A
LST
AlgoDefaultPara
MOD
ALGODEFAULTPA
RA
LST
Default doppler BTS3900, BTS3900 ALGODEFAULTPA
DefDopplerLevel level LTE RA
BfMimoAdaptivePara
MOD
BFMIMOADAPTIVE
PARACFG
LST
BfMimoAdaptiveSwi BfMIMO adaptive BTS3900, BTS3900 BFMIMOADAPTIVE
tch switch LTE PARACFG
BfMimoAdaptivePara
MOD
BFMIMOADAPTIVE
PARACFG
LST
Fixed BfMIMO BTS3900, BTS3900 BFMIMOADAPTIVE
FixedBfMimoMode mode LTE PARACFG
CqiAdaptiveCfg
MOD
CQIADAPTIVECFG
CQI period adaptive BTS3900, BTS3900 LST
CqiPeriodAdaptive switch LTE CQIADAPTIVECFG
CqiAdaptiveCfg
MOD
CQIADAPTIVECFG
User CQI period BTS3900, BTS3900 LST
UserCqiPeriodCfg config LTE CQIADAPTIVECFG
CqiAdaptiveCfg
MOD
SimultaneousAckN CQIADAPTIVECFG
SimulAckNackAndC ackAndCQI config BTS3900, BTS3900 LST
qiSwitch switch LTE CQIADAPTIVECFG
MimoAdaptiveParaCf
MOD
MIMOADAPTIVEPA
RACFG
LST
MimoAdaptiveSwitc MIMO adaptive BTS3900, BTS3900 MIMOADAPTIVEPA
h switch LTE RACFG
MimoAdaptiveParaCf
MOD
MIMOADAPTIVEPA
RACFG
LST
BTS3900, BTS3900 MIMOADAPTIVEPA
FixedMimoMode Fixed MIMO mode LTE RACFG
MimoAdaptiveParaCf
MOD
MIMOADAPTIVEPA
RACFG
LST
BTS3900, BTS3900 MIMOADAPTIVEPA
InitialMimoType Initial Mimo Type LTE RACFG
SrsAdaptiveCfg
MOD
SRSADAPTIVECF
G
LST
SRS period BTS3900, BTS3900 SRSADAPTIVECF
SrsPeriodAdaptive adaptive switch LTE G
SrsAdaptiveCfg
MOD
SRSADAPTIVECF
G
LST
User SRS period BTS3900, BTS3900 SRSADAPTIVECF
UserSrsPeriodCfg config LTE G
TypDrbBsr
BTS3900, BTS3900 LST TYPDRBBSR

Qci QoS Class Identifier LTE MOD TYPDRBBSR
TypDrbBsr
BTS3900, BTS3900 MOD TYPDRBBSR

TPerodicBSRTimer Periodic BSR Timer LTE LST TYPDRBBSR
TypDrbBsr
BSR
Retransmission BTS3900, BTS3900 MOD TYPDRBBSR
RetxBsrTimer Timer LTE LST TYPDRBBSR
HoMeasComm
MOD
HOMEASCOMM
GAP measurement BTS3900, BTS3900 LST
GapPatternType pattern LTE HOMEASCOMM
HoMeasComm
MOD
HOMEASCOMM
EutranFilterCoeffRs EUTRAN RSRP BTS3900, BTS3900 LST
rp filter coefficient LTE HOMEASCOMM
HoMeasComm
MOD
HOMEASCOMM
EutranFilterCoeffRs EUTRAN RSRQ BTS3900, BTS3900 LST
rq filter coefficient LTE HOMEASCOMM
HoMeasComm
MOD
HOMEASCOMM
GERAN filter BTS3900, BTS3900 LST
GeranFilterCoeff coefficient LTE HOMEASCOMM
HoMeasComm
MOD
HOMEASCOMM
SMeasureInd SMeasureInd LTE HOMEASCOMM
HoMeasComm
MOD
HOMEASCOMM
SMeasure SMeasure LTE HOMEASCOMM
HoMeasComm
MOD
HOMEASCOMM
SpeedDepParaInd SpeedDependInd LTE HOMEASCOMM
HoMeasComm
MOD
HOMEASCOMM
TCRmax in BTS3900, BTS3900 LST
TcrMaxConnMode connected mode LTE HOMEASCOMM
HoMeasComm
MOD
HOMEASCOMM
TcrMaxHystConnM TCRmaxHyst in BTS3900, BTS3900 LST
ode connected mode LTE HOMEASCOMM
HoMeasComm
MOD
HOMEASCOMM
NcrMediumConnMo NCR Medium in BTS3900, BTS3900 LST
de connected mode LTE HOMEASCOMM
HoMeasComm
MOD
HOMEASCOMM
NCR High in BTS3900, BTS3900 LST
NcrHighConnMode connected mode LTE HOMEASCOMM
HoMeasComm
TTT Scaling factor MOD

for Medium mobility HOMEASCOMM
state in connected BTS3900, BTS3900 LST
TttSfMedium mode LTE HOMEASCOMM
HoMeasComm
TTT Scaling factor MOD

for High mobility HOMEASCOMM
state in connected BTS3900, BTS3900 LST
TttSfHigh mode LTE HOMEASCOMM
HoMeasComm
MOD
HOMEASCOMM
UtranFilterCoeffRsc UTRAN RSCP filter BTS3900, BTS3900 LST
p coefficient LTE HOMEASCOMM
HoMeasComm
MOD
HOMEASCOMM
UtranFilterCoeffEcn UTRAN ECN0 filter BTS3900, BTS3900 LST
0 coefficient LTE HOMEASCOMM
InterRatHoComm
MOD
INTERRATHOCOM
M
LST
InterRatHoMaxRprt Max report cell BTS3900, BTS3900 INTERRATHOCOM
Cell number LTE M
InterRatHoComm
MOD
INTERRATHOCOM
M
LST
InterRatHoRprtAmo Measurement BTS3900, BTS3900 INTERRATHOCOM
unt report amount LTE M
InterRatHoComm
MOD
INTERRATHOCOM
M
Geran LST
InterRatHoGeranRp measurement BTS3900, BTS3900 INTERRATHOCOM
rtInterval report interval LTE M
InterRatHoComm
MOD
INTERRATHOCOM
M
LST
InterRatHoUtranB1 Utran measurement BTS3900, BTS3900 INTERRATHOCOM
MeasQuan trigger quantity LTE M
InterRatHoComm
MOD
INTERRATHOCOM
M
UTRAN FDD LST
InterRatHoUtranRpr measurement BTS3900, BTS3900 INTERRATHOCOM
tInterval report interval LTE M
MOD
InterRatHoComm INTERRATHOCOM
M
CDMA20001XRTT LST
InterRatHoCdma1x measurement BTS3900, BTS3900 INTERRATHOCOM
RttB1MeasQuan trigger quantity LTE M
InterRatHoComm
MOD
INTERRATHOCOM
M
CDMA20001XRTT LST
InterRatCdma1xRtt measurement BTS3900, BTS3900 INTERRATHOCOM
RprtInterval report interval LTE M
MOD
M
CDMA2000HRPD LST
InterRatHoCdmaHr measurement BTS3900, BTS3900 INTERRATHOCOM
pdB1MeasQuan trigger quantity LTE M
InterRatHoComm
MOD
INTERRATHOCOM
M
CDMA2000HRPD LST
InterRatCdmaHrpd measurement BTS3900, BTS3900 INTERRATHOCOM
RprtInterval report interval LTE M
InterRatHoComm
MOD
INTERRATHOCOM
M
InterRat A1A2 LST
InterRatHoA1A2Tri measurement BTS3900, BTS3900 INTERRATHOCOM
gQuan trigger quantity LTE M
InterRatHoComm
MOD
INTERRATHOCOM
M
LST
InterRatHoEventTy Inter RAT HO BTS3900, BTS3900 INTERRATHOCOM
pe Trigger Event Type LTE M
MOD
INTERRATHOCOM
InterRatHoComm M
LST
Cdma20001XrttMe CDMA2000 1xRTT BTS3900, BTS3900 INTERRATHOCOM
asTimer Measure Timer LTE M
MOD
M
LST
Cdma20001XrttJud CDMA2000 1xRTT BTS3900, BTS3900 INTERRATHOCOM
gePnNum Judge PN Number LTE M
InterRatHoComm
MOD
INTERRATHOCOM
M
CDMA2000 HRPD LST
Cdma2000HrpdFre Frequency Select BTS3900, BTS3900 INTERRATHOCOM
qSelMode Mode LTE M
InterRatHoComm
MOD
INTERRATHOCOM
M
CDMA2000 1xRTT LST
Cdma20001XrttFre Frequency Select BTS3900, BTS3900 INTERRATHOCOM
qSelMode Mode LTE M
MOD
INTERRATHOCOM
InterRatHoComm M
LST
CdmaEcsfbPsConc eCSFB PS BTS3900, BTS3900 INTERRATHOCOM
urrentMode Concurrent Mode LTE M
InterRatHoComm
MOD
INTERRATHOCOM
M
LST
Cdma20001XrttMe eCSFB BTS3900, BTS3900 INTERRATHOCOM
asMode Measurement Mode LTE M
MOD
INTERRATHOCOM
InterRatHoComm M
LST
Cdma1XrttSectorId eCSFB SectorID BTS3900, BTS3900 INTERRATHOCOM
SelMode Select Mode LTE M
InterRatHoComm
MOD
INTERRATHOCOM
M
LST
CellInfoMaxUtranC Max Utran cell num BTS3900, BTS3900 INTERRATHOCOM
ellNum in redirection LTE M
InterRatHoComm
MOD
INTERRATHOCOM
M
LST
CellInfoMaxGeranC Max Geran cell num BTS3900, BTS3900 INTERRATHOCOM
ellNum in redirection LTE M
InterRatHoComm
MOD
INTERRATHOCOM
M
Max Geran cell num LST
GeranCellNumForE in CSFB EMC BTS3900, BTS3900 INTERRATHOCOM
mcRedirect redirection LTE M
InterRatHoComm
MOD
INTERRATHOCOM
M
Max Utran cell num LST
UtranCellNumForE in CSFB EMC BTS3900, BTS3900 INTERRATHOCOM
mcRedirect redirection LTE M
IntraRatHoComm
MOD
INTRARATHOCOM
M
LST
IntraRatHoMaxRprt Max report cell BTS3900, BTS3900 INTRARATHOCOM
Cell number LTE M
IntraRatHoComm
MOD
INTRARATHOCOM
M
LST
IntraRatHoRprtAmo Measurement BTS3900, BTS3900 INTRARATHOCOM
unt report amount LTE M
IntraRatHoComm
MOD
INTRARATHOCOM
M
LST
IntraFreqHoA3Trig A3 measurement BTS3900, BTS3900 INTRARATHOCOM
Quan trigger quantity LTE M
IntraRatHoComm
MOD
INTRARATHOCOM
M
LST
IntraFreqHoA3Rprt A3 measurement BTS3900, BTS3900 INTRARATHOCOM
Quan report quantity LTE M
IntraRatHoComm
MOD
INTRARATHOCOM
M
LST
IntraFreqHoRprtInte A3 measurement BTS3900, BTS3900 INTRARATHOCOM
rval report interval LTE M
IntraRatHoComm
MOD
INTRARATHOCOM
M
LST
InterFreqHoA4Rprt Measurement A4 BTS3900, BTS3900 INTRARATHOCOM
Quan report quantity LTE M
IntraRatHoComm
MOD
INTRARATHOCOM
M
Interfreq LST
InterFreqHoRprtInte measurement BTS3900, BTS3900 INTRARATHOCOM
rval report interval LTE M
IntraRatHoComm
MOD
INTRARATHOCOM
M
InterFreq A1A2 LST
InterFreqHoA1A2Tri Measurement BTS3900, BTS3900 INTRARATHOCOM
gQuan trigger quantity LTE M
IntraRatHoComm
MOD
INTRARATHOCOM
M
A1A2 Measurement LST
FreqPriInterFreqHo trigger quantity of BTS3900, BTS3900 INTRARATHOCOM
A1TrigQuan Freq Priority LTE M
MOD
IntraRatHoComm INTRARATHOCOM
FreqPrior M
loadBased A4 LST
InterFreqHoA4Trig Measurement BTS3900, BTS3900 INTRARATHOCOM
Quan trigger quantity LTE M
LST
CSFallBackHo CSFALLBACKHO
LocalCellId Local cell ID LTE CSFALLBACKHO
CSFallBackHo
MOD
CSFB Utran CSFALLBACKHO
CsfbHoUtranTimeT EventB1 Time To BTS3900, BTS3900 LST
oTrig Trig LTE CSFALLBACKHO
CSFallBackHo
MOD
CSFB Geran CSFALLBACKHO
CsfbHoGeranTimeT EventB1 Time To BTS3900, BTS3900 LST
CSFallBackHo
MOD
CSFB CDMA CSFALLBACKHO
CsfbHoCdmaTimeT EventB1 Time To BTS3900, BTS3900 LST
CSFallBackHo
MOD
CSFB UTRAN CSFALLBACKHO
CsfbHoUtranB1Thd EventB1 RSCP BTS3900, BTS3900 LST
Rscp Trigger Threshold LTE CSFALLBACKHO
CSFallBackHo
MOD
CSFB UTRAN CSFALLBACKHO
CsfbHoUtranB1Thd EventB1 ECN0 BTS3900, BTS3900 LST
Ecn0 Trigger Threshold LTE CSFALLBACKHO
CSFallBackHo
MOD
CSFB GERAN CSFALLBACKHO
CsfbHoGeranB1Th EventB1 Trigger BTS3900, BTS3900 LST
d Threshold LTE CSFALLBACKHO
CSFallBackHo
MOD
CSFB CDMA2000 CSFALLBACKHO
CsfbHoCdmaB1Thd EventB1 Trigger BTS3900, BTS3900 LST
Ps Threshold LTE CSFALLBACKHO
CSFallBackHo
MOD
CSFB Adaptive CSFALLBACKHO
Blind Ho A1 RSRP BTS3900, BTS3900 LST
BlindHoA1ThdRsrp Trigger Threshold LTE CSFALLBACKHO
CSFallBackHo
MOD
CSFALLBACKHO
CsfbProtectionTime CSFB Protection BTS3900, BTS3900 LST
r Timer LTE CSFALLBACKHO
CellAcBar
BTS3900, BTS3900 LST CELLACBAR
LocalCellId Local cell ID LTE MOD CELLACBAR
CellAcBar
AC barring
AcBarringInfoCfgIn information BTS3900, BTS3900 MOD CELLACBAR
d configure indicator LTE LST CELLACBAR
CellAcBar
AcBarringForEmerg Emergency call BTS3900, BTS3900 MOD CELLACBAR

ency barring state LTE LST CELLACBAR
CellAcBar
AC barring for
AcBarringForMoDat mobile data BTS3900, BTS3900 MOD CELLACBAR
aCfgInd configure indicator LTE LST CELLACBAR
CellAcBar
Access probability
AcBarringFactorFor factor for originating BTS3900, BTS3900 MOD CELLACBAR
Call call LTE LST CELLACBAR
CellAcBar
Mean access
barring time for BTS3900, BTS3900 MOD CELLACBAR
AcBarTimeForCall originating call LTE LST CELLACBAR
CellAcBar
AC11 barring state BTS3900, BTS3900 MOD CELLACBAR

AC11BarforCall for originating call LTE LST CELLACBAR
CellAcBar

CellAcBar

CellAcBar

CellAcBar

CellAcBar
AC barring for
AcBarringForMoSig mobile signal BTS3900, BTS3900 MOD CELLACBAR
CfgInd configure indicator LTE LST CELLACBAR
CellAcBar
AcBarringFactorFor Access probability BTS3900, BTS3900 MOD CELLACBAR

Sig factor for signaling LTE LST CELLACBAR
CellAcBar
Mean access
barring time for BTS3900, BTS3900 MOD CELLACBAR
AcBarTimeForSig signaling LTE LST CELLACBAR
CellAcBar

AC11BarForSig for signaling LTE LST CELLACBAR
CellAcBar

CellAcBar

AC13BarForSig for signalling LTE LST CELLACBAR
CellAcBar

AC14BarForSig for signalling LTE LST CELLACBAR
CellAcBar

CellAcBar
AC barring for
AcBarForMVoiceCf MMTEL voice BTS3900, BTS3900 MOD CELLACBAR
gInd configure indicator LTE LST CELLACBAR
CellAcBar
Access probability
AcBarFactorForMV factor for MMTEL BTS3900, BTS3900 MOD CELLACBAR
oice voice LTE LST CELLACBAR
CellAcBar
Mean access
AcBarTimeForMVoi barring time for BTS3900, BTS3900 MOD CELLACBAR
ce MMTEL voice LTE LST CELLACBAR
CellAcBar
AC 11-15 barring
SpecialACBarForM state for MMTEL BTS3900, BTS3900 MOD CELLACBAR
Voice voice LTE LST CELLACBAR
CellAcBar
AC barring for
AcBarForMVideoCf MMTEL video BTS3900, BTS3900 MOD CELLACBAR
gInd configure indicator LTE LST CELLACBAR
CellAcBar
Access probability
AcBarFactorForMVi factor for MMTEL BTS3900, BTS3900 MOD CELLACBAR
deo video LTE LST CELLACBAR
CellAcBar
Mean access
AcBarTimeForMVid barring time for BTS3900, BTS3900 MOD CELLACBAR
eo MMTEL video LTE LST CELLACBAR
CellAcBar
AC 11-15 barring
SpecialACBarForM state for MMTEL BTS3900, BTS3900 MOD CELLACBAR
Video video LTE LST CELLACBAR
CellAccess LST CELLACCESS

LocalCellId Local cell ID LTE CELLACCESS
CellAccess
MOD
BTS3900, BTS3900 CELLACCESS
CellBarred Cell barring state LTE LST CELLACCESS
CellAccess
MOD
Cell reserved for BTS3900, BTS3900 CELLACCESS
CellReservedExt extension LTE LST CELLACCESS
CellAccess
Intra-frequency MOD
reselection BTS3900, BTS3900 CELLACCESS
IntraFreqResel indication LTE LST CELLACCESS
CellAccess
MOD
Plmn Broadcast BTS3900, BTS3900 CELLACCESS
BroadcastMode Mode LTE LST CELLACCESS
CellAccess MOD
Plmn Round BTS3900, BTS3900 CELLACCESS
RoundPeriod Broadcast Period LTE LST CELLACCESS
CellAccess
MOD
Plmn Round Action BTS3900, BTS3900 CELLACCESS
RoundActionTime Time LTE LST CELLACCESS
ADD CELLOP
DSP
CELLBROADCAST
CellOp CNOPERATOR
LST CELLOP
BTS3900, BTS3900 MOD CELLOP
LocalCellId Local cell ID LTE RMV CELLOP
CellOp
ADD CELLOP
LST CELLOP
Local tracking area BTS3900, BTS3900 MOD CELLOP
TrackingAreaId ID LTE RMV CELLOP
CellOp
ADD CELLOP
Cell reserved for BTS3900, BTS3900 MOD CELLOP
CellReservedForOp operator LTE LST CELLOP
CellOp
ADD CELLOP
Operator uplink RB BTS3900, BTS3900 MOD CELLOP
OpUlRbUsedRatio used ratio LTE LST CELLOP
CellOp
ADD CELLOP
Operator downlink BTS3900, BTS3900 MOD CELLOP
OpDlRbUsedRatio RB used ratio LTE LST CELLOP
CellOp
ADD CELLOP
MME configure BTS3900, BTS3900 MOD CELLOP
MMECfgNum number LTE LST CELLOP
CellOp
ADD CELLOP
First MME group BTS3900, BTS3900 MOD CELLOP
MMEGI1 identity LTE LST CELLOP
CellOp
ADD CELLOP
MMEC1 First MME code LTE LST CELLOP
CellOp
ADD CELLOP
Second MME group BTS3900, BTS3900 MOD CELLOP
CellOp
ADD CELLOP
MMEC2 Second MME code LTE LST CELLOP
CellOp
ADD CELLOP
Third MME group BTS3900, BTS3900 MOD CELLOP
CellOp
ADD CELLOP
MMEC3 Third MME code LTE LST CELLOP
CellOp
ADD CELLOP
Fourth MME group BTS3900, BTS3900 MOD CELLOP
CellOp
ADD CELLOP
MMEC4 Fourth MME code LTE LST CELLOP
CellOp DSP
BroadcastCnOperat Broadcast CN BTS3900, BTS3900 CELLBROADCAST
orId operator ID LTE CNOPERATOR
CellResel
BTS3900, BTS3900 LST CELLRESEL
LocalCellId Local cell ID LTE MOD CELLRESEL
CellResel
Hysteresis value for BTS3900, BTS3900 MOD CELLRESEL

Qhyst ranking criteria LTE LST CELLRESEL
Speed-dependent
CellResel reselection
SpeedDepReselCfg parameter BTS3900, BTS3900 MOD CELLRESEL
Ind configure indicator LTE LST CELLRESEL
CellResel
The duration for

evaluating criteria
to enter mobility BTS3900, BTS3900 MOD CELLRESEL
TEvaluation states LTE LST CELLRESEL
CellResel
Additional time
hysteresis for BTS3900, BTS3900 MOD CELLRESEL
THystNormal normal speed LTE LST CELLRESEL
CellResel
The number of cell

changes to enter
NCellChangeMediu medium mobility BTS3900, BTS3900 MOD CELLRESEL
m state LTE LST CELLRESEL
CellResel
The number of cell

changes to enter BTS3900, BTS3900 MOD CELLRESEL
NCellChangeHigh high mobility state LTE LST CELLRESEL
CellResel
Additional
hysteresis for BTS3900, BTS3900 MOD CELLRESEL
QHystSfMedium medium speed LTE LST CELLRESEL
CellResel
Additional
hysteresis for high BTS3900, BTS3900 MOD CELLRESEL
QHystSfHigh speed LTE LST CELLRESEL
CellResel
Threshold for non-

intra freq
SNonIntraSearchCf measurements BTS3900, BTS3900 MOD CELLRESEL
gInd configure indicator LTE LST CELLRESEL
CellResel
Threshold for non-

intra frequency BTS3900, BTS3900 MOD CELLRESEL
SNonIntraSearch measurements LTE LST CELLRESEL
CellResel
Serving frequency
lower priority BTS3900, BTS3900 MOD CELLRESEL
ThrshServLow threshold LTE LST CELLRESEL
CellResel
Cell reselection BTS3900, BTS3900 MOD CELLRESEL

CellReselPriority priority LTE LST CELLRESEL
CellResel
Minimum required BTS3900, BTS3900 MOD CELLRESEL

QRxLevMin RX level LTE LST CELLRESEL
CellResel
Ue max power
allowed configure BTS3900, BTS3900 MOD CELLRESEL
PMaxCfgInd indicator LTE LST CELLRESEL
CellResel
Max transmit power BTS3900, BTS3900 MOD CELLRESEL

PMax allowed LTE LST CELLRESEL
CellResel
Threshold for intra
freq measurements BTS3900, BTS3900 MOD CELLRESEL
SIntraSearchCfgInd configure indicator LTE LST CELLRESEL
CellResel
Threshold for intra

frequency BTS3900, BTS3900 MOD CELLRESEL
SIntraSearch measurements LTE LST CELLRESEL
CellResel Measurement
MeasBandWidthCfg bandwidth BTS3900, BTS3900 MOD CELLRESEL
Ind configure indicator LTE LST CELLRESEL
CellResel
Measurement BTS3900, BTS3900 MOD CELLRESEL

MeasBandWidth bandwidth LTE LST CELLRESEL
CellResel
Cell reselection
timer value for BTS3900, BTS3900 MOD CELLRESEL
TReselEutran EUTRAN LTE LST CELLRESEL
CellResel
Speed state scale
SpeedStateSfCfgIn factor configure BTS3900, BTS3900 MOD CELLRESEL
d indicator LTE LST CELLRESEL
CellResel
Scaling factor of
TReselEutra in
TReselEutranSfMe medium mobility BTS3900, BTS3900 MOD CELLRESEL
dium state LTE LST CELLRESEL
CellResel
Scaling factor of
TReselEutranSfHig TReselEutra in high BTS3900, BTS3900 MOD CELLRESEL
h mobility state LTE LST CELLRESEL
CellResel
BTS3900, BTS3900 MOD CELLRESEL

NeighCellConfig Neighbor cell config LTE LST CELLRESEL
CellResel
PresenceAntennaP Presence antenna BTS3900, BTS3900 MOD CELLRESEL

ort1 port1 LTE LST CELLRESEL
CellResel
RSRQ Threshold
for intra frequency BTS3900, BTS3900 MOD CELLRESEL
SIntraSearchQ measurements LTE LST CELLRESEL
CellResel
RSRQ Threshold
for non-intra
frequency BTS3900, BTS3900 MOD CELLRESEL
SNonIntraSearchQ measurements LTE LST CELLRESEL
CellResel Serving frequency

lower priority RSRQ
ThrshServLowQCfg threshold configure BTS3900, BTS3900 MOD CELLRESEL
Ind indicator LTE LST CELLRESEL
CellResel
Serving frequency
lower priority RSRQ BTS3900, BTS3900 MOD CELLRESEL
ThrshServLowQ threshold LTE LST CELLRESEL
CellResel
Minimum required
quality level BTS3900, BTS3900 MOD CELLRESEL
QQualMinCfgInd configure indicator LTE LST CELLRESEL
CellResel
Minimum required BTS3900, BTS3900 MOD CELLRESEL

QQualMin quality level LTE LST CELLRESEL
ADD
CELLRESELCDMA
2000
LST
CELLRESELCDMA
CellReselCdma2000 2000
MOD
CELLRESELCDMA
2000
RMV
BTS3900, BTS3900 CELLRESELCDMA
LocalCellId Local cell ID LTE 2000
ADD
CELLRESELCDMA
2000
MOD
CellReselCdma2000
CELLRESELCDMA
2000
System time LST
information BTS3900, BTS3900 CELLRESELCDMA
SysTimeCfgInd configure indicator LTE 2000
CellReselCdma2000
ADD
CELLRESELCDMA
2000
MOD
CELLRESELCDMA
CDMA and EUTRA 2000
network LST
synchronised BTS3900, BTS3900 CELLRESELCDMA
CdmaEutraSyn indicator LTE 2000
ADD
CellReselCdma2000 CELLRESELCDMA
2000
MOD
CELLRESELCDMA
2000
CDMA search LST
SearchWndSizeCfg window size BTS3900, BTS3900 CELLRESELCDMA
Ind configure indicator LTE 2000
CellReselCdma2000
ADD
CELLRESELCDMA
2000
MOD
CELLRESELCDMA
2000
LST
BTS3900, BTS3900 CELLRESELCDMA
SearchWndSize Search window size LTE 2000
CellReselCdma2000
ADD
CELLRESELCDMA
2000
MOD
CELLRESELCDMA
2000
LST
HRPD parameters BTS3900, BTS3900 CELLRESELCDMA
HrpdParaCfgInd configure indicator LTE 2000
ADD
CellReselCdma2000 CELLRESELCDMA
2000
MOD
CELLRESELCDMA
2000
HRPD cell LST
HrpdCellReselectP reselection BTS3900, BTS3900 CELLRESELCDMA
aramCfgInd configure indicator LTE 2000
CellReselCdma2000
ADD
CELLRESELCDMA
2000
MOD
CELLRESELCDMA
2000
LST
Cell reselection BTS3900, BTS3900 CELLRESELCDMA
TreselectionHrpd timer for HRPD LTE 2000
CellReselCdma2000
ADD
CELLRESELCDMA
2000
MOD
CELLRESELCDMA
2000
Speed state scale LST
SpeedStateSfCfgIn factor configure BTS3900, BTS3900 CELLRESELCDMA
d indicator LTE 2000
CellReselCdma2000
ADD
CELLRESELCDMA
2000
MOD
CELLRESELCDMA
Scaling factor of 2000
TReselCdmaHrpd LST
TReselCdmaHrpdSf in high mobility BTS3900, BTS3900 CELLRESELCDMA
High state LTE 2000
CellReselCdma2000
ADD
CELLRESELCDMA
2000
MOD
CELLRESELCDMA
Scaling factor of 2000
TReselCdmaHrpd LST
TReselCdmaHrpdSf in medium mobility BTS3900, BTS3900 CELLRESELCDMA
Medium state LTE 2000
CellReselCdma2000
ADD
CELLRESELCDMA
2000
MOD
CELLRESELCDMA
2000
LST
Cdma1XrttParaCfgI 1XRTT parameters BTS3900, BTS3900 CELLRESELCDMA
nd configure indicator LTE 2000
CellReselCdma2000
ADD
CELLRESELCDMA
2000
MOD
CELLRESELCDMA
1XRTT state of long 2000
code generation LST
Cdma1XrttLongCod registers configure BTS3900, BTS3900 CELLRESELCDMA
eStateCfgInd indicator LTE 2000
CellReselCdma2000
ADD
CELLRESELCDMA
2000
MOD
CELLRESELCDMA
2000
1XRTT cell LST
Cdma1XrttCellRese reselection BTS3900, BTS3900 CELLRESELCDMA
lCfgInd configure indicator LTE 2000
CellReselCdma2000
ADD
CELLRESELCDMA
2000
MOD
CELLRESELCDMA
2000
LST
Cdma1XrttTreselect Cell reselection BTS3900, BTS3900 CELLRESELCDMA
ion timer for 1XRTT LTE 2000
CellReselCdma2000
ADD
CELLRESELCDMA
2000
MOD
CELLRESELCDMA
2000
1XRTT speed state LST
Cdma1XrttSpeedSt scale factors BTS3900, BTS3900 CELLRESELCDMA
ateCfgInd configure indicator LTE 2000
CellReselCdma2000
ADD
CELLRESELCDMA
2000
MOD
CELLRESELCDMA
2000
LST
Cdma1XrttSfMediu 1XRTT medium BTS3900, BTS3900 CELLRESELCDMA
m speed scale factor LTE 2000
CellReselCdma2000
ADD
CELLRESELCDMA
2000
MOD
CELLRESELCDMA
2000
LST
1XRTT high speed BTS3900, BTS3900 CELLRESELCDMA
Cdma1XrttSfHigh scale factor LTE 2000
ADD
CELLRESELGERA
N
LST
CELLRESELGERA
CellReselGeran N
MOD
CELLRESELGERA
N
RMV
BTS3900, BTS3900 CELLRESELGERA
LocalCellId Local cell ID LTE N
CellReselGeran
ADD
CELLRESELGERA
N
MOD
CELLRESELGERA
N
Cell reselection LST
timer value for BTS3900, BTS3900 CELLRESELGERA
TReselGeran GERAN LTE N
ADD
CELLRESELGERA
N
MOD
CellReselGeran CELLRESELGERA
N
SpeedStateSfCfgIn factor configure BTS3900, BTS3900 CELLRESELGERA
d indicator LTE N
CellReselGeran ADD
CELLRESELGERA
N
MOD
CELLRESELGERA
Scaling factor of N
TReselGeran in LST
TReselGeranSfMed medium mobility BTS3900, BTS3900 CELLRESELGERA
ium state LTE N
CellReselGeran ADD
CELLRESELGERA
N
MOD
CELLRESELGERA
N
Scaling factor of LST
TReselGeran in BTS3900, BTS3900 CELLRESELGERA
TReselGeranSfHigh high mobility state LTE N
ADD
CELLRESELUTRA
N
LST
CELLRESELUTRA
CellReselUtran N
MOD
CELLRESELUTRA
N
RMV
BTS3900, BTS3900 CELLRESELUTRA
LocalCellId Local cell ID LTE N
CellReselUtran
ADD
CELLRESELUTRA
N
MOD
CELLRESELUTRA
N
timer value for BTS3900, BTS3900 CELLRESELUTRA
TReselUtran UTRAN LTE N
ADD
CELLRESELUTRA
N
MOD
CellReselUtran CELLRESELUTRA
N
SpeedStateSfCfgIn factor configure BTS3900, BTS3900 CELLRESELUTRA
d indicator LTE N
CellReselUtran
ADD
CELLRESELUTRA
N
MOD
CELLRESELUTRA
Scaling factor of N
TReselUtran in LST
TReselUtranSfMedi medium mobility BTS3900, BTS3900 CELLRESELUTRA
um state LTE N
CellReselUtran
ADD
CELLRESELUTRA
N
MOD
CELLRESELUTRA
N
TReselUtran in high BTS3900, BTS3900 CELLRESELUTRA
TReselUtranSfHigh mobility state LTE N
CellSel
BTS3900, BTS3900 LST CELLSEL
LocalCellId Local cell ID LTE MOD CELLSEL
CellSel
Minimum required BTS3900, BTS3900 MOD CELLSEL

QRxLevMin RX level LTE LST CELLSEL
CellSel

QRxLevMinOffset RX level offset LTE LST CELLSEL
CellSel

QQualMin RX quality level LTE LST CELLSEL
Minimum required
CellSel RX quality level
QQualMinOffsetCfg offset configure BTS3900, BTS3900 MOD CELLSEL
Ind indicator LTE LST CELLSEL
CellSel
Minimum required
RX quality level BTS3900, BTS3900 MOD CELLSEL
QQualMinOffset offset LTE LST CELLSEL
CellSiMap
BTS3900, BTS3900 LST CELLSIMAP
LocalCellId Local cell ID LTE MOD CELLSIMAP
CellSiMap
SIB mapping SI BTS3900, BTS3900 MOD CELLSIMAP

SiMapSwitch algorithm switch LTE LST CELLSIMAP
CellSiMap
BTS3900, BTS3900 MOD CELLSIMAP

Sib2Period SIB2 period LTE LST CELLSIMAP
CellSiMap

CellSiMap

CellSiMap

CellSiMap

CellSiMap

CellSiMap

CellSiMap

CellSiMap

CellSiMap
ETWS PN message BTS3900, BTS3900 MOD CELLSIMAP

EtwsPnDuration duration time LTE LST CELLSIMAP
CellSiMap
EtwsSnOverlapPoli ETWS SN message BTS3900, BTS3900 MOD CELLSIMAP

cy overlap policy LTE LST CELLSIMAP
CellSiMap
EtwsPnOverlapPoli ETWS PN message BTS3900, BTS3900 MOD CELLSIMAP

cy overlap policy LTE LST CELLSIMAP
CellSiMap

CellSiMap
Effective code rate BTS3900, BTS3900 MOD CELLSIMAP

SiTransEcr for SI transmission LTE LST CELLSIMAP
LST
CellUlpcComm CELLULPCCOMM
LocalCellId Local cell ID LTE CELLULPCCOMM
CellUlpcComm
MOD
CELLULPCCOMM
PassLossCoeff Path loss coefficient LTE CELLULPCCOMM
CellUlpcComm
MOD
CELLULPCCOMM
P0NominalPUCCH P0 nominal PUCCH LTE CELLULPCCOMM
CellUlpcComm
MOD
CELLULPCCOMM
P0NominalPUSCH P0 nominal PUSCH LTE CELLULPCCOMM
CellUlpcComm
MOD
CELLULPCCOMM
DeltaFPUCCHForm DeltaF for PUCCH BTS3900, BTS3900 LST
at1 format 1 LTE CELLULPCCOMM
CellUlpcComm
MOD
CELLULPCCOMM
at1b format 1b LTE CELLULPCCOMM
CellUlpcComm
MOD
CELLULPCCOMM
at2 format 2 LTE CELLULPCCOMM
CellUlpcComm
MOD
CELLULPCCOMM
at2a format 2a LTE CELLULPCCOMM
CellUlpcComm
MOD
CELLULPCCOMM
at2b format 2b LTE CELLULPCCOMM
CellUlpcComm
MOD
CELLULPCCOMM
DeltaPreambleMsg Delta preamble BTS3900, BTS3900 LST
3 value for msg3 LTE CELLULPCCOMM
LST
ENBCELLOPRSVD
eNBCellOpRsvdPara PARA
MOD
BTS3900, BTS3900 ENBCELLOPRSVD
LocalCellId Local cell ID LTE PARA
eNBCellOpRsvdPara
LST
ENBCELLOPRSVD
PARA
MOD
Local tracking area BTS3900, BTS3900 ENBCELLOPRSVD
TrackingAreaId ID LTE PARA
eNBCellOpRsvdPara
MOD
ENBCELLOPRSVD
PARA
LST
Reserved Switch BTS3900, BTS3900 ENBCELLOPRSVD
RsvdSwPara0 Parameter 0 LTE PARA
eNBCellOpRsvdPara
MOD
ENBCELLOPRSVD
PARA
LST
eNBCellOpRsvdPara
MOD
ENBCELLOPRSVD
PARA
LST
eNBCellOpRsvdPara
MOD
ENBCELLOPRSVD
PARA
LST
Reserved BTS3900, BTS3900 ENBCELLOPRSVD
RsvdPara2 Parameter 2 LTE PARA
eNBCellOpRsvdPara
MOD
ENBCELLOPRSVD
PARA
LST
eNBCellOpRsvdPara
MOD
ENBCELLOPRSVD
PARA
LST
eNBCellOpRsvdPara
MOD
ENBCELLOPRSVD
PARA
LST
eNBCellOpRsvdPara
MOD
ENBCELLOPRSVD
PARA
LST
eNBCellOpRsvdPara
MOD
ENBCELLOPRSVD
PARA
LST
eNBCellOpRsvdPara
MOD
ENBCELLOPRSVD
PARA
LST
eNBCellOpRsvdPara
MOD
ENBCELLOPRSVD
PARA
LST
eNBCellOpRsvdPara
MOD
ENBCELLOPRSVD
PARA
LST
eNBCellOpRsvdPara
MOD
ENBCELLOPRSVD
PARA
LST
eNBCellOpRsvdPara
MOD
ENBCELLOPRSVD
PARA
LST
eNBCellOpRsvdPara
MOD
ENBCELLOPRSVD
PARA
LST
eNBCellOpRsvdPara
MOD
ENBCELLOPRSVD
PARA
LST
eNBCellOpRsvdPara
MOD
ENBCELLOPRSVD
PARA
LST
eNBCellOpRsvdPara
MOD
ENBCELLOPRSVD
PARA
LST
eNBCellOpRsvdPara
MOD
ENBCELLOPRSVD
PARA
LST
eNBCellOpRsvdPara
MOD
ENBCELLOPRSVD
PARA
LST
eNBCellOpRsvdPara
MOD
ENBCELLOPRSVD
PARA
LST
eNBCellOpRsvdPara
MOD
ENBCELLOPRSVD
PARA
LST
eNBCellOpRsvdPara
MOD
ENBCELLOPRSVD
PARA
LST
ADD
EUCELLSECTORE
QM
LST
EUCELLSECTORE
eUCellSectorEqm QM
MOD
EUCELLSECTORE
QM
RMV
EUCELLSECTORE
BTS3900, BTS3900 QM
LocalCellId Local cell ID LTE DSP EURTWP
ADD
EUCELLSECTORE
QM
DSP EURTWP
LST
eUCellSectorEqm EUCELLSECTORE
QM
MOD
EUCELLSECTORE
QM
RMV
Sector equipment BTS3900, BTS3900 EUCELLSECTORE
SectorEqmId ID LTE QM
eUCellSectorEqm
ADD
EUCELLSECTORE
QM
MOD
EUCELLSECTORE
QM
LST
ReferenceSignalPw Reference signal BTS3900, BTS3900 EUCELLSECTORE
r power LTE QM
eUCellSectorEqm
ADD
EUCELLSECTORE
QM
MOD
EUCELLSECTORE
QM
LST
Baseband BTS3900, BTS3900 EUCELLSECTORE
BaseBandEqmId equipment ID LTE QM
eUCellSectorEqm BTS3900, BTS3900
CN RRU Cabinet No. LTE DSP EURTWP
eUCellSectorEqm BTS3900, BTS3900

SRN RRU Subrack No. LTE DSP EURTWP
BTS3900, BTS3900
eUCellSectorEqm
SN RRU Slot No. LTE DSP EURTWP
eUCellSectorEqm
Received total BTS3900, BTS3900

EuRTWP wideband power LTE DSP EURTWP
eUCellSectorEqm
BTS3900, BTS3900
RXNO RX Channels No. LTE DSP EURTWP
eUCellSectorEqm
ADD
EUCELLSECTORE
QM
MOD
EUCELLSECTORE
QM
LST
ReferenceSignalPw Reference signal BTS3900, BTS3900 EUCELLSECTORE
rMargin power margin LTE QM
ADD
EUSECTOREQMG
ROUP
ADD
EUSECTOREQMID
2GROUP
LST
EUSECTOREQMG
ROUP
EuSectorEqmGroup LST
EUSECTOREQMID
2GROUP
MOD
EUSECTOREQMG
ROUP
RMV
EUSECTOREQMG
ROUP
RMV
BTS3900, BTS3900 EUSECTOREQMID
LocalCellId Local cell ID LTE 2GROUP
ADD
EUSECTOREQMG
ROUP
ADD
EUSECTOREQMID
2GROUP
LST
EUSECTOREQMG
ROUP
EuSectorEqmGroup LST
EUSECTOREQMID
2GROUP
MOD
EUSECTOREQMG
ROUP
RMV
EUSECTOREQMG
ROUP
RMV
Sector Equipment BTS3900, BTS3900 EUSECTOREQMID
SectorEqmGroupId Group ID LTE 2GROUP
EuSectorEqmGroup
Sector Equipment BTS3900, BTS3900
SectorEqmRef Reference LTE None
ADD
EUSECTOREQMID
2GROUP
RMV
EuSectorEqmGroup EUSECTOREQMID
2GROUP
LST
SectorEqmRefType. Sector equipment BTS3900, BTS3900 EUSECTOREQMID
SectorEqmId ID LTE 2GROUP
EuSectorEqmGroup
ADD
EUSECTOREQMG
ROUP
MOD
EUSECTOREQMG
ROUP
LST
Baseband BTS3900, BTS3900 EUSECTOREQMG
BaseBandEqmId equipment ID LTE ROUP
IbdlInfo
BTS3900, BTS3900
LocalCellId Local cell ID LTE DSP IBDLINFO
IbdlInfo
BTS3900, BTS3900
eNodeBId Connect eNodeB ID LTE DSP IBDLINFO
IbdlInfo RRU/RFU Cabinet BTS3900, BTS3900

CN No. LTE DSP IBDLINFO
IbdlInfo RRU/RFU Subrack BTS3900, BTS3900
SRN No. LTE DSP IBDLINFO
IbdlInfo BTS3900, BTS3900

SN RRU/RFU Slot No. LTE DSP IBDLINFO
IbdlInfo Number of LBBP BTS3900, BTS3900

IBDLNum Data Links LTE DSP IBDLINFO
BTS3900, BTS3900
IbdlInfo
IBDLId LBBP Data Link ID LTE DSP IBDLINFO
IbdlInfo
LBBP Data Link BTS3900, BTS3900
IBDLStatus Status LTE DSP IBDLINFO
IbdlInfo BTS3900, BTS3900

OdiId ODI ID LTE DSP IBDLINFO
IbdlInfo LBBP Data Link BTS3900, BTS3900

IBDLInPortId Input Port No. LTE DSP IBDLINFO
IbdlInfo LBBP Data Link BTS3900, BTS3900

IBDLOutPortId Output Port No. LTE DSP IBDLINFO
LBBP Data Link
IbdlInfo IBDLLoopbackDela Loopback Delay BTS3900, BTS3900
y (us) LTE DSP IBDLINFO
IbdlInfo LBBP Data Link

IBDLLoopbackTime Loopback Timeout BTS3900, BTS3900
outNum Counter LTE DSP IBDLINFO
IbdlInfo
BTS3900, BTS3900
BoardCabinetNo Board Cabinet No. LTE DSP IBDLINFO
IbdlInfo
BTS3900, BTS3900
BoardSubrackNo Board Subrack No. LTE DSP IBDLINFO
IbdlInfo
BTS3900, BTS3900
BoardSlotNo Board Slot No. LTE DSP IBDLINFO
TimeAlignmentTimer
BTS3900, BTS3900 LST TATIMER
LocalCellId Local cell ID LTE MOD TATIMER
TimeAlignmentTimer
TimeAlignmentTime Uplink time BTS3900, BTS3900 MOD TATIMER

r alignment timer LTE LST TATIMER
TimeAlignmentTimer
Uplink timing
TimingAdvCmdOpt advance command BTS3900, BTS3900 MOD TATIMER
Switch optimization switch LTE LST TATIMER
LST
UeTimerConst UETIMERCONST
LocalCellId Local cell ID LTE UETIMERCONST
UeTimerConst
MOD
UETIMERCONST
T300 Timer 300 LTE UETIMERCONST
UeTimerConst
MOD
UETIMERCONST
UeTimerConst
MOD
UETIMERCONST
UeTimerConst
MOD
UETIMERCONST
UeTimerConst MOD
UETIMERCONST
N311 Constant N311 LTE UETIMERCONST
UeTimerConst MOD
UETIMERCONST
N310 Constant N310 LTE UETIMERCONST
ACT CELL
ADD CELL
ADD CELLBAND
BLK CELL
DEA CELL
DSP CELL
DSP
CELLULCOMPCLU
STER
Cell DSP
PRIBBPADJUST
LST CELL
LST CELLBAND
MOD CELL
RMV CELL
RMV CELLBAND
STR
CELLRFLOOPBAC
K
STR
BTS3900, BTS3900 CELLSELFTEST
LocalCellId Local Cell ID LTE UBL CELL
Cell
ADD CELL
BTS3900, BTS3900 MOD CELL
CellName Cell Name LTE LST CELL
Cell
ADD CELL
CsgInd Csg indicator LTE LST CELL
Cell
ADD CELL
Uplink cyclic prefix BTS3900, BTS3900 MOD CELL
UlCyclicPrefix length LTE LST CELL
Cell
ADD CELL
Downlink cyclic BTS3900, BTS3900 MOD CELL
DlCyclicPrefix prefix length LTE LST CELL
Cell
ADD CELL
ADD CELLBAND
LST CELLBAND
MOD CELL
BTS3900, BTS3900 RMV CELLBAND
FreqBand Frequency band LTE LST CELL
Cell
ADD CELL
Uplink EARFCN BTS3900, BTS3900 MOD CELL
UlEarfcnCfgInd indication LTE LST CELL
Cell
ADD CELL
UlEarfcn Uplink EARFCN LTE LST CELL
Cell
ADD CELL
DlEarfcn Downlink EARFCN LTE LST CELL
Cell
ADD CELL
UlBandWidth Uplink bandwidth LTE LST CELL
Cell
ADD CELL
DlBandWidth Downlink bandwidth LTE LST CELL
Cell
ADD CELL
CellId Cell ID LTE LST CELL
Cell
ADD CELL
PhyCellId Physical cell ID LTE LST CELL
Cell
ADD CELL
AdditionalSpectrum Additional spectrum BTS3900, BTS3900 MOD CELL
Emission emission LTE LST CELL
Cell
BTS3900, BTS3900
CellActiveState Cell active state LTE LST CELL
Cell
BTS3900, BTS3900 BLK CELL

CellAdminState Cell admin state LTE LST CELL
Cell
Cell middle block BTS3900, BTS3900 BLK CELL

CellMidBlkTimer timer LTE LST CELL
Cell
ADD CELL
Cell FDD TDD BTS3900, BTS3900 MOD CELL
FddTddInd indication LTE LST CELL
Cell
ADD CELL
SubframeAssignme Subframe BTS3900, BTS3900 MOD CELL
nt assignment LTE LST CELL
Cell
ADD CELL
SpecialSubframePa Special subframe BTS3900, BTS3900 MOD CELL
tterns patterns LTE LST CELL
Cell
ADD CELL
CellSpecificOffset Cell specific offset LTE LST CELL
Cell
ADD CELL
QoffsetFreq Frequency offset LTE LST CELL
Cell
ADD CELL
Root sequence BTS3900, BTS3900 MOD CELL
RootSequenceIdx index LTE LST CELL
Cell
ADD CELL
HighSpeedFlag High speed flag LTE LST CELL
Cell
ADD CELL
PreambleFmt Preamble format LTE LST CELL
Cell
ADD CELL
CellRadius Cell radius LTE LST CELL
Cell
Customized ADD CELL

CustomizedBandWi bandwidth BTS3900, BTS3900 MOD CELL
dthCfgInd configure indicator LTE LST CELL
Cell
ADD CELL
CustomizedULBand Customized uplink BTS3900, BTS3900 MOD CELL
Width bandwidth LTE LST CELL
Cell
ADD CELL
CustomizedDLBand Customized BTS3900, BTS3900 MOD CELL
Width downlink bandwidth LTE LST CELL
Cell
ADD CELL
EmergencyAreaIdC Emergency Area Id BTS3900, BTS3900 MOD CELL
fgInd indicator LTE LST CELL
Cell
ADD CELL
EmergencyAreaId Emergency Area ID LTE LST CELL
Cell
Ue max power ADD CELL

allowed configure BTS3900, BTS3900 MOD CELL
UePowerMaxCfgInd indicator LTE LST CELL
Cell
ADD CELL
Max transmit power BTS3900, BTS3900 MOD CELL
UePowerMax allowed LTE LST CELL
Cell
ADD CELL
Flag of Multi-RRU BTS3900, BTS3900 MOD CELL
MultiRruCellFlag Cell LTE LST CELL
Cell
ADD CELL
Mode of Multi-RRU BTS3900, BTS3900 MOD CELL
MultiRruCellMode Cell LTE LST CELL
Cell
ADD CELL
CPRICompression CPRI Compression LTE LST CELL
Cell
ADD CELL
Sector equipment BTS3900, BTS3900 MOD CELL
SectorEqmNum number of SFN cell LTE LST CELL
Cell
ADD CELL
AirCellFlag Air Cell Flag LTE LST CELL
Cell
ADD CELL
CrsPortNum CRS Port Number LTE LST CELL
Cell
ADD CELL
Cell transmission BTS3900, BTS3900 MOD CELL
TxRxMode and reception mode LTE LST CELL
Cell ADD CELL

UserLabel User label LTE LST CELL
Cell
ADD CELL
WorkMode Work mode LTE LST CELL
Cell
ADD CELL
EuCellStandbyMod BTS3900, BTS3900 MOD CELL
e Cell Standby Mode LTE LST CELL
Cell
BTS3900, BTS3900
CellState Cell instance state LTE DSP CELL
Cell
Reason for latest BTS3900, BTS3900

CellLatestAvailState state change LTE DSP CELL
Cell CellLatestSetupTim Cell latest setup BTS3900, BTS3900

e time LTE DSP CELL
Cell
CellLatestSetupTyp Cell latest setup BTS3900, BTS3900

e operate type LTE DSP CELL
Cell CellLatestRemoveT Cell latest remove BTS3900, BTS3900

ime time LTE DSP CELL
Cell
CellLatestRemoveT Cell latest remove BTS3900, BTS3900

ype operate type LTE DSP CELL
Cell
CellPowerSaveStat Cell power save BTS3900, BTS3900

e state LTE DSP CELL
Cell
Primary LBBP BTS3900, BTS3900
MainBbpInfo information LTE DSP CELL
Cell
BTS3900, BTS3900
CellTopoType Cell topology type LTE DSP CELL
Cell
RF module cabinet BTS3900, BTS3900
CabinetNo number LTE DSP CELL
Cell
RF module subrack BTS3900, BTS3900
SubrackNo number LTE DSP CELL
Cell
RF module slot BTS3900, BTS3900
SlotNo number LTE DSP CELL
Cell
SymbolShutdownSt Symbol shutdown BTS3900, BTS3900
ate state LTE DSP CELL
Cell
Maximum transmit BTS3900, BTS3900

MaxTxPower power LTE DSP CELL
BTS3900, BTS3900
Cell
eNodeBId eNodeB ID LTE DSP CELL
Cell
BTS3900, BTS3900
BbpCabinetNo LBBP Cabinet No. LTE DSP CELL
Cell
BTS3900, BTS3900
BbpSubrackNo LBBP Subrack No. LTE DSP CELL
Cell BTS3900, BTS3900

BbpSlotNo LBBP Slot No. LTE DSP CELL
Cell
BTS3900, BTS3900
Status Work Status LTE DSP CELL
Cell DSP
Coordinating local BTS3900, BTS3900 CELLULCOMPCLU
CoLocalCellId cell ID LTE STER
Cell
BTS3900, BTS3900
CellSlaveBand Cell Slave Band LTE None
Cell
ADD CELLBAND
MultiBand.FreqBan BTS3900, BTS3900 LST CELLBAND
d Frequency band LTE RMV CELLBAND
ADD
SFNAUXRESBIND
LST
SfnAuxResBind SFNAUXRESBIND
MOD
SFNAUXRESBIND
Sector equipment BTS3900, BTS3900 RMV
SectorEqmId ID LTE SFNAUXRESBIND
ADD
SFNAUXRESBIND
MOD
RMV
SFNAUXRESBIND
eNodeBId Main eNodeB ID LTE SFNAUXRESBIND
ADD
SFNAUXRESBIND
MOD
RMV
SFNAUXRESBIND
Main eNodeB Local BTS3900, BTS3900 LST
LocalCellId cell ID LTE SFNAUXRESBIND
SfnAuxResBind
ADD
SFNAUXRESBIND
MOD
SFNAUXRESBIND
Baseband BTS3900, BTS3900 LST
BaseBandEqmId equipment ID LTE SFNAUXRESBIND
SfnAuxResBind
ADD
SFNAUXRESBIND
MOD
SFNAUXRESBIND
ReferenceSignalPw Reference signal BTS3900, BTS3900 LST
r power LTE SFNAUXRESBIND
SfnAuxResBind
ADD
SFNAUXRESBIND
MOD
SFNAUXRESBIND
ReferenceSignalPw Reference signal BTS3900, BTS3900 LST
rMargin power margin LTE SFNAUXRESBIND
ADD
SFNCELLBIND
LST
SfnCellBind SFNCELLBIND
LocalCellId Local cell ID LTE SFNCELLBIND
ADD
SFNCELLBIND
RMV
SfnCellBind SFNCELLBIND
Slave site eNodeB BTS3900, BTS3900 LST
eNodeBId ID LTE SFNCELLBIND
DSP
CELLCALIBRATIO
CellBf N
BTS3900, BTS3900 LST CELLBF
LocalCellId Local cell ID LTE MOD CELLBF
CellBf
Beamforming
maximum number BTS3900, BTS3900 MOD CELLBF
MaxBfRankPara of layers LTE LST CELLBF
CellBf DSP
BTS3900, BTS3900 CELLCALIBRATIO
LatestOperation Latest operation LTE N
CellBf DSP
SecondLatestOpera Second latest BTS3900, BTS3900 CELLCALIBRATIO
tion operation LTE N
CellBf DSP
ThirdLatestOperatio Third latest BTS3900, BTS3900 CELLCALIBRATIO
n operation LTE N
CellBf DSP
FourthLatestOperati Fourth latest BTS3900, BTS3900 CELLCALIBRATIO
on operation LTE N
CellBf DSP
FifthLatestOperatio Fifth latest BTS3900, BTS3900 CELLCALIBRATIO
n operation LTE N
CellBf DSP
SixthLatestOperatio Sixth latest BTS3900, BTS3900 CELLCALIBRATIO
n operation LTE N
CellBf DSP
SeventhLatestOper Seventh latest BTS3900, BTS3900 CELLCALIBRATIO
ation operation LTE N
CellBf DSP
EighthLatestOperati Eighth latest BTS3900, BTS3900 CELLCALIBRATIO
on operation LTE N
CellBf DSP
NinthLatestOperatio Ninth latest BTS3900, BTS3900 CELLCALIBRATIO
n operation LTE N
CellBf DSP
TenthLatestOperati Tenth latest BTS3900, BTS3900 CELLCALIBRATIO
on operation LTE N
CellBf DSP
Latest operation BTS3900, BTS3900 CELLCALIBRATIO
LatestOpTime time LTE N
CellBf DSP
Second latest BTS3900, BTS3900 CELLCALIBRATIO
SecondOpTime operation time LTE N
CellBf DSP
Third latest BTS3900, BTS3900 CELLCALIBRATIO
ThirdOpTime operation time LTE N
CellBf DSP
Fourth latest BTS3900, BTS3900 CELLCALIBRATIO
FourthOpTime operation time LTE N
CellBf DSP
Fifth latest BTS3900, BTS3900 CELLCALIBRATIO
FifthOpTime operation time LTE N
CellBf DSP
Sixth latest BTS3900, BTS3900 CELLCALIBRATIO
SixthOpTime operation time LTE N
CellBf
Seventh latest BTS3900, BTS3900
SeventhOpTime operation time LTE None
CellBf DSP
Eighth latest BTS3900, BTS3900 CELLCALIBRATIO
EighthOpTime operation time LTE N
CellBf DSP
Ninth latest BTS3900, BTS3900 CELLCALIBRATIO
NinthOpTime operation time LTE N
CellBf DSP
Tenth latest BTS3900, BTS3900 CELLCALIBRATIO
TenthOpTime operation time LTE N
CellBf DSP
Latest operation BTS3900, BTS3900 CELLCALIBRATIO
LatestOpType type LTE N
CellBf DSP
Second latest BTS3900, BTS3900 CELLCALIBRATIO
SecondOpType operation type LTE N
CellBf DSP
Third latest BTS3900, BTS3900 CELLCALIBRATIO
ThirdOpType operation type LTE N
CellBf DSP
Fourth latest BTS3900, BTS3900 CELLCALIBRATIO
FourthOpType operation type LTE N
CellBf DSP
Fifth latest BTS3900, BTS3900 CELLCALIBRATIO
FifthOpType operation type LTE N
CellBf DSP
Sixth latest BTS3900, BTS3900 CELLCALIBRATIO
SixthOpType operation type LTE N
CellBf DSP
Seventh latest BTS3900, BTS3900 CELLCALIBRATIO
SeventhOpType operation type LTE N
CellBf DSP
Eighth latest BTS3900, BTS3900 CELLCALIBRATIO
EighthOpType operation type LTE N
CellBf DSP
Ninth latest BTS3900, BTS3900 CELLCALIBRATIO
NinthOpType operation type LTE N
CellBf DSP
Tenth latest BTS3900, BTS3900 CELLCALIBRATIO
TenthOpType operation type LTE N
LST
CELLDLICICMCPA
CellDLIcicMcPara RA
MOD
BTS3900, BTS3900 CELLDLICICMCPA
LocalCellId Local cell ID LTE RA
CellDLIcicMcPara
MOD
CELLDLICICMCPA
RA
Downlink ICIC LST
measurement BTS3900, BTS3900 CELLDLICICMCPA
ReportInterval report interval LTE RA
CellDLIcicMcPara
MOD
CELLDLICICMCPA
RA
Downlink ICIC LST
measurement max BTS3900, BTS3900 CELLDLICICMCPA
MaxReportCellNum report cell number LTE RA
CellDLIcicMcPara
MOD
CELLDLICICMCPA
RA
DownLink ICIC LST
ReportAmount report amount LTE RA
CellDLIcicMcPara
MOD
CELLDLICICMCPA
RA
DownLink ICIC LST
ReportQuantity report quantity LTE RA
CellDLIcicMcPara
MOD
CELLDLICICMCPA
RA
DownLink ICIC LST
TriggerQuantity trigger quantity LTE RA
CellDLIcicMcPara
MOD
CELLDLICICMCPA
RA
DownLink ICIC LST
Hysteresis hysteresis LTE RA
CellDLIcicMcPara
MOD
CELLDLICICMCPA
RA
DownLink ICIC LST
measurement time BTS3900, BTS3900 CELLDLICICMCPA
TimeToTrigger to trigger LTE RA
CellDLIcicMcPara
MOD
CELLDLICICMCPA
RA
LST
Downlink ICIC A3 BTS3900, BTS3900 CELLDLICICMCPA
A3Offset offset LTE RA
CellDLIcicMcPara
MOD
CELLDLICICMCPA
RA
LST
Downlink ICIC A6 BTS3900, BTS3900 CELLDLICICMCPA
CellEicic
BTS3900, BTS3900 LST CELLEICIC
LocalCellId Local cell ID LTE MOD CELLEICIC
CellEicic
BTS3900, BTS3900 MOD CELLEICIC

AbsPattern Abs pattern LTE LST CELLEICIC
LST
CellLowPower CELLLOWPOWER
LocalCellId Local cell ID LTE CELLLOWPOWER
CellLowPower
MOD
Low power CELLLOWPOWER
consumption mode BTS3900, BTS3900 LST
LowPwrSwitch switch LTE CELLLOWPOWER
CellLowPower
MOD
Low power CELLLOWPOWER
consumption mode BTS3900, BTS3900 LST
LowPwrOrder order LTE CELLLOWPOWER
CellLowPower
MOD
CELLLOWPOWER
StartTime Start time LTE CELLLOWPOWER
CellLowPower
MOD
CELLLOWPOWER
StopTime Stop time LTE CELLLOWPOWER
CellLowPower
MOD
CELLLOWPOWER
CellUsedPwrReduc Cell used power BTS3900, BTS3900 LST
eTimeLen reduce time length LTE CELLLOWPOWER
CellLowPower
MOD
Reference signal CELLLOWPOWER
RsPwrReduceTime power reduce time BTS3900, BTS3900 LST
Len length LTE CELLLOWPOWER
CellLowPower
MOD
CELLLOWPOWER
RfShutDownTimeLe RF shutdown time BTS3900, BTS3900 LST
n length LTE CELLLOWPOWER
CellLowPower
MOD
CELLLOWPOWER
Cell used power BTS3900, BTS3900 LST
CellUsedPwrRatio ratio LTE CELLLOWPOWER
CellLowPower
MOD
CELLLOWPOWER
Reference signal BTS3900, BTS3900 LST
RsPwrAdjOffset power adjust offset LTE CELLLOWPOWER
CellLowPower
Time length for MOD

entering the low CELLLOWPOWER
power consumption BTS3900, BTS3900 LST
EnterTimeLen mode LTE CELLLOWPOWER
CellLowPower
MOD
CELLLOWPOWER
Back power save BTS3900, BTS3900 LST
BakPwrSavPolicy policy LTE CELLLOWPOWER
CellMro
BTS3900, BTS3900 LST CELLMRO
LocalCellId Local cell ID LTE MOD CELLMRO
CellMro
CIO adjustment
range configuration BTS3900, BTS3900 MOD CELLMRO
CioAdjLimitCfgInd indicator LTE LST CELLMRO
CellMro
CIO adjustment BTS3900, BTS3900 MOD CELLMRO

CioAdjUpperLimit upper limit LTE LST CELLMRO
CellMro
CIO adjustment BTS3900, BTS3900 MOD CELLMRO

CioAdjLowerLimit lower limit LTE LST CELLMRO
CellRacThd LST CELLRACTHD

LocalCellId Local cell ID LTE CELLRACTHD
CellRacThd
MOD
Gold service arp BTS3900, BTS3900 CELLRACTHD
GoldServiceArpThd threshold LTE LST CELLRACTHD
CellRacThd
MOD
SilverServiceArpTh Silver service arp BTS3900, BTS3900 CELLRACTHD
d threshold LTE LST CELLRACTHD
CellRacThd
MOD
QCI1 handover BTS3900, BTS3900 CELLRACTHD
Qci1HoThd admission threshold LTE LST CELLRACTHD
CellRacThd
MOD
CellRacThd
MOD
CellRacThd
MOD
CellRacThd
Gold new service MOD

NewGoldServiceOff admission threshold BTS3900, BTS3900 CELLRACTHD
set offset LTE LST CELLRACTHD
CellRacThd
Silver new service MOD

NewSilverServiceOf admission threshold BTS3900, BTS3900 CELLRACTHD
fset offset LTE LST CELLRACTHD
CellRacThd
Bronze new service MOD

NewCopperService admission threshold BTS3900, BTS3900 CELLRACTHD
Offset offset LTE LST CELLRACTHD
CellRacThd
MOD
QCI1 congest BTS3900, BTS3900 CELLRACTHD
Qci1CongThd threshold LTE LST CELLRACTHD
CellRacThd
MOD
CellRacThd
MOD
CellRacThd
MOD
CellRacThd
Gold-level GBR
service congest MOD
GoldGbrCongPropo scheduler BTS3900, BTS3900 CELLRACTHD
rtion proportion LTE LST CELLRACTHD
CellRacThd
Silver-level GBR
service congest MOD
SilverGbrCongProp scheduler BTS3900, BTS3900 CELLRACTHD
ortion proportion LTE LST CELLRACTHD
CellRacThd
Bronze-level GBR
service congest MOD
CopperGbrCongPro scheduler BTS3900, BTS3900 CELLRACTHD
portion proportion LTE LST CELLRACTHD
CellRacThd
GBR used resource MOD

GbrRbUsedHighTh high proportion BTS3900, BTS3900 CELLRACTHD
d threshold LTE LST CELLRACTHD
CellRacThd
GBR used resource MOD

low proportion BTS3900, BTS3900 CELLRACTHD
GbrRbUsedLowThd threshold LTE LST CELLRACTHD
CellRacThd
MOD
BTS3900, BTS3900 CELLRACTHD
LdcMeaArpThd ARP threshold LTE LST CELLRACTHD
CellRacThd
MOD
Offset for service BTS3900, BTS3900 CELLRACTHD
CongRelOffset congest relieving LTE LST CELLRACTHD
CellRacThd
MOD
Preemption ARP BTS3900, BTS3900 CELLRACTHD
PreemptionArpThd threshold LTE LST CELLRACTHD
CellRacThd
MOD
Uplink RB used BTS3900, BTS3900 CELLRACTHD
UlRbHighThd ratio high threshold LTE LST CELLRACTHD
CellRacThd
MOD
Downlink RB used BTS3900, BTS3900 CELLRACTHD
DlRbHighThd ratio high threshold LTE LST CELLRACTHD
CellRacThd
MOD
Uplink RB used BTS3900, BTS3900 CELLRACTHD
UlRbLowThd ratio low threshold LTE LST CELLRACTHD
CellRacThd
MOD
Downlink RB used BTS3900, BTS3900 CELLRACTHD
DlRbLowThd ratio low threshold LTE LST CELLRACTHD
CellRacThd
MOD
MaxNonGbrBearer Non-GBR max BTS3900, BTS3900 CELLRACTHD
Num bearer number LTE LST CELLRACTHD
DSP
CELLRFSHUTDO
WN
LST
CellRfShutdown CELLRFSHUTDO
WN
MOD
BTS3900, BTS3900 CELLRFSHUTDO
LocalCellId Local cell ID LTE WN
CellRfShutdown
MOD
CELLRFSHUTDO
WN
LST
RF intelligent BTS3900, BTS3900 CELLRFSHUTDO
RfShutdownSwitch shutdown switch LTE WN
MOD
CELLRFSHUTDO
CellRfShutdown WN
LST
StartTime Start time LTE WN
CellRfShutdown
MOD
CELLRFSHUTDO
WN
LST
StopTime Stop time LTE WN
CellRfShutdown
MOD
CELLRFSHUTDO
WN
LST
Reference signal BTS3900, BTS3900 CELLRFSHUTDO
RsPwrAdjOffset power adjust offset LTE WN
CellRfShutdown
MOD
CELLRFSHUTDO
WN
LST
Downlink PRB BTS3900, BTS3900 CELLRFSHUTDO
DlPrbThd threshold LTE WN
CellRfShutdown
MOD
CELLRFSHUTDO
WN
LST
Uplink PRB BTS3900, BTS3900 CELLRFSHUTDO
UlPrbThd threshold LTE WN
CellRfShutdown
MOD
CELLRFSHUTDO
WN
LST
Downlink PRB BTS3900, BTS3900 CELLRFSHUTDO
DlPrbOffset offset LTE WN
CellRfShutdown
MOD
CELLRFSHUTDO
WN
LST
UlPrbOffset Uplink PRB offset LTE WN
CellRfShutdown
Current status DSP

about RF intelligent BTS3900, BTS3900 CELLRFSHUTDO
CurrentStatus shutdown LTE WN
CellRfShutdown
Latest exiting cause DSP

about RF intelligent BTS3900, BTS3900 CELLRFSHUTDO
LatestExitingCause shutdown LTE WN
CELLRICDATA
LST
CELLRICALGO
CellRicAlgo MOD
CELLRICALGO
BTS3900, BTS3900 SND
LocalCellId Local cell ID LTE CELLRICPCISEQ
CellRicAlgo
MOD
CELLRICALGO
RIC algorithm BTS3900, BTS3900 LST
RicAlgoSwitch switch LTE CELLRICALGO
CellRicAlgo
MOD
CELLRICALGO
MuteUpPTSSymNu Mute UpPTS BTS3900, BTS3900 LST
m Symbol Number LTE CELLRICALGO
CellRicAlgo
MOD
CELLRICALGO
Whether to mute UL BTS3900, BTS3900 LST
MuteULSym symbol LTE CELLRICALGO
LST
CELLSERVICEDIF
CellServiceDiffCfg FCFG
MOD
BTS3900, BTS3900 CELLSERVICEDIF
LocalCellId Local cell ID LTE FCFG
CellServiceDiffCfg
MOD
CELLSERVICEDIF
FCFG
Service LST
differentiation BTS3900, BTS3900 CELLSERVICEDIF
ServiceDiffSwitch switch LTE FCFG
CellServiceDiffCfg
MOD
CELLSERVICEDIF
FCFG
LST
QueueServiceWeig BTS3900, BTS3900 CELLSERVICEDIF
ht0 Weight of queue 0 LTE FCFG
CellServiceDiffCfg
MOD
CELLSERVICEDIF
FCFG
LST
CellServiceDiffCfg
MOD
CELLSERVICEDIF
FCFG
LST
CellServiceDiffCfg
MOD
CELLSERVICEDIF
FCFG
LST
CellServiceDiffCfg
MOD
CELLSERVICEDIF
FCFG
LST
CellServiceDiffCfg
MOD
CELLSERVICEDIF
FCFG
LST
CellServiceDiffCfg
MOD
CELLSERVICEDIF
FCFG
LST
LST
CellShutdown CELLSHUTDOWN
LocalCellId Local cell ID LTE CELLSHUTDOWN
CellShutdown
MOD
CELLSHUTDOWN
CellShutdownSwitc Intelligent power-off BTS3900, BTS3900 LST
h of carriers switch LTE CELLSHUTDOWN
MOD
CellShutdown CELLSHUTDOWN
StartTime Start time LTE CELLSHUTDOWN
CellShutdown
MOD
CELLSHUTDOWN
StopTime Stop time LTE CELLSHUTDOWN
CellShutdown
MOD
CELLSHUTDOWN
Downlink PRB BTS3900, BTS3900 LST
DlPrbThd threshold LTE CELLSHUTDOWN
CellShutdown
MOD
CELLSHUTDOWN
Downlink PRB BTS3900, BTS3900 LST
DlPrbOffset offset LTE CELLSHUTDOWN
CellShutdown MOD
CELLSHUTDOWN
Uplink PRB BTS3900, BTS3900 LST
UlPrbThd threshold LTE CELLSHUTDOWN
CellShutdown
MOD
CELLSHUTDOWN
UlPrbOffset Uplink PRB offset LTE CELLSHUTDOWN
LST
CELLULICICMCPA
CellULIcicMcPara RA
MOD
BTS3900, BTS3900 CELLULICICMCPA
CellULIcicMcPara
MOD
CELLULICICMCPA
RA
Uplink ICIC LST
measurement BTS3900, BTS3900 CELLULICICMCPA
ReportInterval report interval LTE RA
CellULIcicMcPara
MOD
CELLULICICMCPA
RA
Uplink ICIC LST
measurement max BTS3900, BTS3900 CELLULICICMCPA
MaxReportCellNum report cell number LTE RA
CellULIcicMcPara
MOD
CELLULICICMCPA
RA
Uplink ICIC LST
ReportAmount report amount LTE RA
CellULIcicMcPara
MOD
CELLULICICMCPA
RA
Uplink ICIC LST
ReportQuantity report quantity LTE RA
CellULIcicMcPara
MOD
CELLULICICMCPA
RA
Uplink ICIC LST
TriggerQuantity trigger quantity LTE RA
CellULIcicMcPara
MOD
CELLULICICMCPA
RA
Uplink ICIC LST
Hysteresis hysteresis LTE RA
CellULIcicMcPara
MOD
CELLULICICMCPA
RA
Uplink ICIC LST
measurement time BTS3900, BTS3900 CELLULICICMCPA
TimeToTrigger to trigger LTE RA
CellULIcicMcPara
MOD
CELLULICICMCPA
RA
LST
Uplink ICIC A3 BTS3900, BTS3900 CELLULICICMCPA
LST
CellUlschAlgo CELLULSCHALGO
LocalCellId Local cell ID LTE CELLULSCHALGO
CellUlschAlgo
MOD
CELLULSCHALGO
Uplink Scheduling BTS3900, BTS3900 LST
UlschStrategy Strategy LTE CELLULSCHALGO
CellUlschAlgo
MOD
CELLULSCHALGO
adaptive HARQ BTS3900, BTS3900 LST
AdaptHarqSwitch switch LTE CELLULSCHALGO
CellUlschAlgo
MOD
CELLULSCHALGO
SinrAdjustTargetIble SINR target IBLER BTS3900, BTS3900 LST
r adjustment LTE CELLULSCHALGO
CellUlschAlgo
System Bandwidth MOD

Ratio Used By Pre- CELLULSCHALGO
PreAllocationBand schedule user per BTS3900, BTS3900 LST
widthRatio TTI LTE CELLULSCHALGO
CellUlschAlgo
MOD
CELLULSCHALGO
PreAllocationMinPe minimal period of BTS3900, BTS3900 LST
riod pre-allocation LTE CELLULSCHALGO
CellUlschAlgo
MOD
CELLULSCHALGO
data size of pre- BTS3900, BTS3900 LST
PreAllocationSize allocation LTE CELLULSCHALGO
CellUlschAlgo
MOD
CELLULSCHALGO
UlHoppingType Uplink hopping type LTE CELLULSCHALGO
CellUlschAlgo
MOD
CELLULSCHALGO
FreeUserUlRbUsed Free Users Uplink BTS3900, BTS3900 LST
Ratio RB Ratio LTE CELLULSCHALGO
CellUlschAlgo
MOD
UL scheduling CELLULSCHALGO
request user data BTS3900, BTS3900 LST
UlSrSchDateLen length LTE CELLULSCHALGO
CellUlschAlgo
MOD
Semi-persistent CELLULSCHALGO
resource implicit BTS3900, BTS3900 LST
SpsRelThd release threshold LTE CELLULSCHALGO
CellUlschAlgo
MOD
CELLULSCHALGO
SmartPreAllocation Smart pre-allocation BTS3900, BTS3900 LST
Duration duration LTE CELLULSCHALGO
CellUlschAlgo
MOD
CELLULSCHALGO
UlEpfCapacityFacto Uplink EPF capacity BTS3900, BTS3900 LST
r factor LTE CELLULSCHALGO
CellUlschAlgo
MOD
Uplink Resource CELLULSCHALGO
UlRbAllocationStrat Block Allocation BTS3900, BTS3900 LST
egy Strategy LTE CELLULSCHALGO
LST
ENBCELLRSVDPA
eNBCellRsvdPara RA
MOD
BTS3900, BTS3900 ENBCELLRSVDPA
eNBCellRsvdPara
MOD
ENBCELLRSVDPA
RA
LST
Reserved Switch BTS3900, BTS3900 ENBCELLRSVDPA
RsvdSwPara0 Parameter 0 LTE RA
eNBCellRsvdPara
MOD
ENBCELLRSVDPA
RA
LST
eNBCellRsvdPara
MOD
ENBCELLRSVDPA
RA
LST
eNBCellRsvdPara
MOD
ENBCELLRSVDPA
RA
LST
Reserved BTS3900, BTS3900 ENBCELLRSVDPA
RsvdPara2 Parameter 2 LTE RA
eNBCellRsvdPara
MOD
ENBCELLRSVDPA
RA
LST
eNBCellRsvdPara
MOD
ENBCELLRSVDPA
RA
LST
eNBCellRsvdPara
MOD
ENBCELLRSVDPA
RA
LST
eNBCellRsvdPara
MOD
ENBCELLRSVDPA
RA
LST
eNBCellRsvdPara
MOD
ENBCELLRSVDPA
RA
LST
eNBCellRsvdPara
MOD
ENBCELLRSVDPA
RA
LST
eNBCellRsvdPara
MOD
ENBCELLRSVDPA
RA
LST
eNBCellRsvdPara
MOD
ENBCELLRSVDPA
RA
LST
eNBCellRsvdPara
MOD
ENBCELLRSVDPA
RA
LST
eNBCellRsvdPara
MOD
ENBCELLRSVDPA
RA
LST
eNBCellRsvdPara
MOD
ENBCELLRSVDPA
RA
LST
eNBCellRsvdPara
MOD
ENBCELLRSVDPA
RA
LST
eNBCellRsvdPara
MOD
ENBCELLRSVDPA
RA
LST
eNBCellRsvdPara
MOD
ENBCELLRSVDPA
RA
LST
eNBCellRsvdPara
MOD
ENBCELLRSVDPA
RA
LST
eNBCellRsvdPara
MOD
ENBCELLRSVDPA
RA
LST
eNBCellRsvdPara
MOD
ENBCELLRSVDPA
RA
LST
eNBCellRsvdPara
MOD
ENBCELLRSVDPA
RA
LST
eNBCellRsvdPara
MOD
ENBCELLRSVDPA
RA
LST
LST
INTERRATCELLSH
InterRatCellShutdow UTDOWN
MOD
BTS3900, BTS3900 INTERRATCELLSH
LocalCellId Local cell ID LTE UTDOWN
MOD
INTERRATCELLSH
InterRatCellShutdow UTDOWN
LST
ForceShutdownSwit Inter-RAT cell BTS3900, BTS3900 INTERRATCELLSH
ch shutdown switch LTE UTDOWN
InterRatCellShutdow
MOD
INTERRATCELLSH
UTDOWN
LST
StartTime Start time LTE UTDOWN
InterRatCellShutdow
MOD
INTERRATCELLSH
UTDOWN
LST
StopTime Stop time LTE UTDOWN
InterRatCellShutdow
MOD
INTERRATCELLSH
UTDOWN
LST
UE number BTS3900, BTS3900 INTERRATCELLSH
BearNumThd threshold LTE UTDOWN
InterRatCellShutdow
MOD
INTERRATCELLSH
UTDOWN
LST
Downlink PRB BTS3900, BTS3900 INTERRATCELLSH
DlPrbThd threshold LTE UTDOWN
InterRatCellShutdow
MOD
INTERRATCELLSH
UTDOWN
LST
Uplink PRB BTS3900, BTS3900 INTERRATCELLSH
UlPrbThd threshold LTE UTDOWN
LST
CELLALGOSWITC
CellAlgoSwitch H
MOD
BTS3900, BTS3900 CELLALGOSWITC
LocalCellId Local cell ID LTE H
CellAlgoSwitch
MOD
CELLALGOSWITC
H
LST
RACH algorithm BTS3900, BTS3900 CELLALGOSWITC
RachAlgoSwitch switch LTE H
CellAlgoSwitch
MOD
CELLALGOSWITC
H
LST
SoundingRS BTS3900, BTS3900 CELLALGOSWITC
SrsAlgoSwitch algorithm switch LTE H
CellAlgoSwitch
MOD
CELLALGOSWITC
H
LST
PUCCH algorithm BTS3900, BTS3900 CELLALGOSWITC
PucchAlgoSwitch switch LTE H
CellAlgoSwitch
MOD
CELLALGOSWITC
H
LST
AQM algorithm BTS3900, BTS3900 CELLALGOSWITC
AqmAlgoSwitch switch LTE H
CellAlgoSwitch
MOD
CELLALGOSWITC
H
LST
CQI adjust BTS3900, BTS3900 CELLALGOSWITC
CqiAdjAlgoSwitch algorithm switch LTE H
CellAlgoSwitch
MOD
CELLALGOSWITC
H
LST
RlfDetectAlgoSwitc RLF detection BTS3900, BTS3900 CELLALGOSWITC
h algorithm switch LTE H
CellAlgoSwitch
MOD
CELLALGOSWITC
H
Dynamic adjust LST
voltage algorithm BTS3900, BTS3900 CELLALGOSWITC
DynAdjVoltSwitch switch LTE H
CellAlgoSwitch
MOD
CELLALGOSWITC
H
LST
RAC algorithm BTS3900, BTS3900 CELLALGOSWITC
RacAlgoSwitch switch LTE H
CellAlgoSwitch
MOD
CELLALGOSWITC
H
LST
Load balancing BTS3900, BTS3900 CELLALGOSWITC
MlbAlgoSwitch algorithm switch LTE H
CellAlgoSwitch
MOD
CELLALGOSWITC
H
Downlink power LST
control algorithm BTS3900, BTS3900 CELLALGOSWITC
DlPcAlgoSwitch switch LTE H
CellAlgoSwitch
MOD
CELLALGOSWITC
H
Uplink power LST
control algorithm BTS3900, BTS3900 CELLALGOSWITC
UlPcAlgoSwitch switch LTE H
CellAlgoSwitch
MOD
CELLALGOSWITC
H
LST
BfAlgoSwitch BF algorithm switch LTE H
CellAlgoSwitch
MOD
CELLALGOSWITC
H
LST
DlSchSwitch DL schedule switch LTE H
CellAlgoSwitch
MOD
CELLALGOSWITC
H
LST
Uplink schedule BTS3900, BTS3900 CELLALGOSWITC
UlSchSwitch switch LTE H
CellAlgoSwitch
MOD
CELLALGOSWITC
H
LST
RanShareModeSwit RAN Sharing Mode BTS3900, BTS3900 CELLALGOSWITC
ch Switch LTE H
CellAlgoSwitch
MOD
CELLALGOSWITC
H
Based on LST
FreqPriorityHoSwitc Frequency Priority BTS3900, BTS3900 CELLALGOSWITC
h HO Switch LTE H
CellAlgoSwitch
MOD
CELLALGOSWITC
H
LST
MUBF algorithm BTS3900, BTS3900 CELLALGOSWITC
MuBfAlgoSwitch switch LTE H
CellAlgoSwitch
MOD
CELLALGOSWITC
H
LST
Distance-based BTS3900, BTS3900 CELLALGOSWITC
DistBasedHoSwitch Handover Switch LTE H
CellAlgoSwitch
MOD
CELLALGOSWITC
H
LST
AcBar algorithms BTS3900, BTS3900 CELLALGOSWITC
AcBarAlgoSwitch switch LTE H
CellAlgoSwitch
MOD
CELLALGOSWITC
H
LST
UlCoMP algorithms BTS3900, BTS3900 CELLALGOSWITC
UlCompSwitch switch LTE H
CellAlgoSwitch
MOD
CELLALGOSWITC
H
LST
MRC/IRC BTS3900, BTS3900 CELLALGOSWITC
MrcIrcAdptSwitch adaptation switch LTE H
CellAlgoSwitch
MOD
CELLALGOSWITC
H
LST
SFN UL Scheduling BTS3900, BTS3900 CELLALGOSWITC
SfnUlSchSwitch Switch LTE H
CellAlgoSwitch
MOD
CELLALGOSWITC
H
LST
SFN DL Scheduling BTS3900, BTS3900 CELLALGOSWITC
SfnDlSchSwitch Switch LTE H
MOD
CellAlgoSwitch CELLALGOSWITC
H
LST
IrcSwitch IRC Switch LTE H
CellAlgoSwitch
MOD
CELLALGOSWITC
H
LST
Dynamic DRX BTS3900, BTS3900 CELLALGOSWITC
DynDrxSwitch switch LTE H
CellAlgoSwitch
MOD
CELLALGOSWITC
H
High Mobility LST
HighMobiTrigIdleMo Triggered Idle Mode BTS3900, BTS3900 CELLALGOSWITC
deSwitch Switch LTE H
CellAlgoSwitch
MOD
CELLALGOSWITC
H
LST
Interference BTS3900, BTS3900 CELLALGOSWITC
AvoidInterfSwitch avoidance switch LTE H
CellAlgoSwitch
MOD
CELLALGOSWITC
H
LST
GL power share BTS3900, BTS3900 CELLALGOSWITC
GLPwrShare switch LTE H
CellAlgoSwitch
MOD
CELLALGOSWITC
H
LST
EicicSwitch eIcic switch LTE H
CellAlgoSwitch
MOD
CELLALGOSWITC
H
PUCCH resource LST
PUSCHMaxRBPUC switch based on UL BTS3900, BTS3900 CELLALGOSWITC
CHAdjSwitch peak rate LTE H
MOD
CELLALGOSWITC
CellAlgoSwitch H
LST
Downlink CoMP BTS3900, BTS3900 CELLALGOSWITC
DlCompSwitch algorithms switch LTE H
MOD
CellAlgoSwitch
CELLALGOSWITC
H
LST
PSIC algorithm BTS3900, BTS3900 CELLALGOSWITC
PsicSwitch switch LTE H
CellAlgoSwitch
MOD
CELLALGOSWITC
H
LST
Load Balancing BTS3900, BTS3900 CELLALGOSWITC
MlbHoMode Handover Policy LTE H
CellAlgoSwitch
MOD
CELLALGOSWITC
H
LST
SfnLoadBasedAdpt SFN Load-based BTS3900, BTS3900 CELLALGOSWITC
Switch Adaptive Switch LTE H
CellDlIcic
BTS3900, BTS3900 LST CELLDLICIC
LocalCellId Local cell ID LTE MOD CELLDLICIC
CellDlIcic
Downlink band BTS3900, BTS3900 MOD CELLDLICIC

BandMode division scheme LTE LST CELLDLICIC
CellDlIcic
DlIcicUserAttrGfact User Attribution BTS3900, BTS3900 MOD CELLDLICIC

orThd Gfactor Threshold LTE LST CELLDLICIC
CellDlIcic
DlIcicNoiseUserRsr Noise User RSRP BTS3900, BTS3900 MOD CELLDLICIC

pThd Threshold LTE LST CELLDLICIC
LST
CellDlpcPdcch CELLDLPCPDCCH
LocalCellId Local cell ID LTE CELLDLPCPDCCH
CellDlpcPdcch
MOD
CELLDLPCPDCCH
DCI power offset for BTS3900, BTS3900 LST
DediDciPwrOffset dedicated control LTE CELLDLPCPDCCH
LST
CellDlpcPdsch CELLDLPCPDSCH
LocalCellId Local cell ID LTE CELLDLPCPDSCH
CellDlpcPdsch
MOD
CELLDLPCPDSCH
CcuPa Center UE PA LTE CELLDLPCPDSCH
CellDlpcPdsch
MOD
CELLDLPCPDSCH
CeuPa Edge UE PA LTE CELLDLPCPDSCH
LST
CellDlpcPhich CELLDLPCPHICH
LocalCellId Local cell ID LTE CELLDLPCPHICH
CellDlpcPhich
MOD
CELLDLPCPHICH
Phich Pc Off Power BTS3900, BTS3900 LST
PwrOffset Offset LTE CELLDLPCPHICH
LST
CellDlschAlgo CELLDLSCHALGO
LocalCellId Local cell ID LTE CELLDLSCHALGO
CellDlschAlgo
MOD
CELLDLSCHALGO
Downlink BTS3900, BTS3900 LST
DlschStrategy scheduling Strategy LTE CELLDLSCHALGO
CellDlschAlgo
MOD
CELLDLSCHALGO
FreeUserDlRbUsed Free Users BTS3900, BTS3900 LST
Ratio Downlink RB Ratio LTE CELLDLSCHALGO
CellDlschAlgo
MOD
CELLDLSCHALGO
BtServiceWeight P2P Service Weight LTE CELLDLSCHALGO
CellDlschAlgo
MOD
CELLDLSCHALGO
Other Service BTS3900, BTS3900 LST
OtherServiceWeight Weight LTE CELLDLSCHALGO
CellDlschAlgo
MOD
CELLDLSCHALGO
maximum number BTS3900, BTS3900 LST
MaxMimoRankPara of MIMO layers LTE CELLDLSCHALGO
CellDlschAlgo
MOD
CELLDLSCHALGO
Downlink CA BTS3900, BTS3900 LST
CaSchStrategy Schedule Strategy LTE CELLDLSCHALGO
CellDlschAlgo
MOD
Reserved resource CELLDLSCHALGO
NonGbrResourceR ratio for non-GBR BTS3900, BTS3900 LST
atio services LTE CELLDLSCHALGO
CellDlschAlgo
MOD
CELLDLSCHALGO
DlEpfCapacityFacto Downlink EPF BTS3900, BTS3900 LST
r capacity factor LTE CELLDLSCHALGO
CellDlschAlgo
MOD
RB Priority MCS CELLDLSCHALGO
RBPriMcsSelectRat Select Ratio BTS3900, BTS3900 LST
ioThd Threshold LTE CELLDLSCHALGO
CellDlschAlgo
MOD
CELLDLSCHALGO
CellEdgeUserRbAll Cell Edge User RB BTS3900, BTS3900 LST
ocMode Allocation Mode LTE CELLDLSCHALGO
CellDlschAlgo
MOD
CELLDLSCHALGO
Downlink ICIC BTS3900, BTS3900 LST
DlIcicSchMode Schedule Mode LTE CELLDLSCHALGO
CellDlschAlgo
MOD
CELLDLSCHALGO
RBG Resource BTS3900, BTS3900 LST
RbgAllocStrategy Allocation Strategy LTE CELLDLSCHALGO
CellMLB
BTS3900, BTS3900 LST CELLMLB
LocalCellId Local cell ID LTE MOD CELLMLB
CellMLB
Intra-Frequency
Mobility Load
Balancing BTS3900, BTS3900 MOD CELLMLB
IntraFreqMlbThd Threshold LTE LST CELLMLB
CellMLB
Inter-Frequency
Mobility Load
Balancing BTS3900, BTS3900 MOD CELLMLB
InterFreqMlbThd Threshold LTE LST CELLMLB
CellMLB
Inter-RAT Mobility
Load Balancing BTS3900, BTS3900 MOD CELLMLB
InterRatMlbThd Threshold LTE LST CELLMLB
CellMLB
LoadExchangePeri Load Information BTS3900, BTS3900 MOD CELLMLB

od Exchange Period LTE LST CELLMLB
CellMLB
BTS3900, BTS3900 MOD CELLMLB

LoadOffset Load Offset LTE LST CELLMLB
CellMLB
Load Difference BTS3900, BTS3900 MOD CELLMLB

LoadDiffThd Threshold LTE LST CELLMLB
CellMLB
Inter-RAT Mobility
InterRatMlbUeNum Load Balancing UE BTS3900, BTS3900 MOD CELLMLB
Thd Number Threshold LTE LST CELLMLB
CellMLB
UTRAN Idle Mode

Mobility Load
Balancing Initial BTS3900, BTS3900 MOD CELLMLB
InitValidPeriod Valid Period LTE LST CELLMLB
CellMLB
Load Transfer BTS3900, BTS3900 MOD CELLMLB

LoadTransferFactor Factor LTE LST CELLMLB
CellMLB
Mobility Load
Balancing Trigger BTS3900, BTS3900 MOD CELLMLB
MlbTriggerMode Mode LTE LST CELLMLB
CellMLB
Inter-frequency
Mobility Load
InterFreqMlbUeNu Balancing UE BTS3900, BTS3900 MOD CELLMLB
mThd Number Threshold LTE LST CELLMLB
CellMLB
Mobility Load
Balancing UE BTS3900, BTS3900 MOD CELLMLB
MlbUeNumOffset Number Offset LTE LST CELLMLB
CellMLB
Mobility Load
Balancing Max UE BTS3900, BTS3900 MOD CELLMLB
MlbMaxUeNum Number LTE LST CELLMLB
CellMLB
Mobility Load
Balancing UE
Selection PRB BTS3900, BTS3900 MOD CELLMLB
MlbUeSelectPrbThd Usage Threshold LTE LST CELLMLB
CellMLB
BTS3900, BTS3900 MOD CELLMLB

HotSpotUeMode Hot Spot UE Mode LTE LST CELLMLB
LST
CellPdcchAlgo CELLPDCCHALGO
LocalCellId Local cell ID LTE CELLPDCCHALGO
CellPdcchAlgo
MOD
CELLPDCCHALGO
SignalCongregateL BTS3900, BTS3900 LST
ComSigCongregLv evel LTE CELLPDCCHALGO
CellPdcchAlgo
MOD
CELLPDCCHALGO
Cce Ratio Adjust BTS3900, BTS3900 LST
CceRatioAdjSwitch Switch LTE CELLPDCCHALGO
CellPdcchAlgo
MOD
CELLPDCCHALGO
PDCCH Initial BTS3900, BTS3900 LST
InitPdcchSymNum Symbol Number LTE CELLPDCCHALGO
CellPdcchAlgo
MOD
CELLPDCCHALGO
PDCCH Virtual BTS3900, BTS3900 LST
VirtualLoadPro Loading Proportion LTE CELLPDCCHALGO
CellPdcchAlgo
MOD
PDCCH Symbol CELLPDCCHALGO
PdcchSymNumSwit Number Adjust BTS3900, BTS3900 LST
ch Switch LTE CELLPDCCHALGO
CellPdcchAlgo
MOD
CELLPDCCHALGO
CceUseRatio CCE use ratio LTE CELLPDCCHALGO
CellPdcchAlgo
MOD
PDCCH CELLPDCCHALGO
PdcchAggLvlCLAdj Aggregation Level BTS3900, BTS3900 LST
ustSwitch CL Switch LTE CELLPDCCHALGO
CellPdcchAlgo
MOD
CELLPDCCHALGO
DPDVirtualLoadSwi DPD Virtual Load BTS3900, BTS3900 LST
tch Switch LTE CELLPDCCHALGO
CellPdcchAlgo
MOD
CELLPDCCHALGO
DPDVirtualLoadTyp DPD Virtual Load BTS3900, BTS3900 LST
e Type LTE CELLPDCCHALGO
LST
CellPucchAlgo CELLPUCCHALGO
LocalCellId Local cell ID LTE CELLPUCCHALGO
CellPucchAlgo
MOD
CELLPUCCHALGO
SRI Low Load BTS3900, BTS3900 LST
SriLowLoadThd Threshold LTE CELLPUCCHALGO
LST
CELLNOACCESSA
CellNoAccessAlmPa LMPARA
MOD
BTS3900, BTS3900 CELLNOACCESSA
LocalCellId Local cell ID LTE LMPARA
CellNoAccessAlmPa
MOD
CELLNOACCESSA
LMPARA
LST
NoAccessStartDete No access detect BTS3900, BTS3900 CELLNOACCESSA
ctTime start time LTE LMPARA
CellNoAccessAlmPa
MOD
CELLNOACCESSA
LMPARA
LST
NoAccessStopDete No access detect BTS3900, BTS3900 CELLNOACCESSA
ctTime stop time LTE LMPARA
CellNoAccessAlmPa
MOD
CELLNOACCESSA
LMPARA
LST
NoAccessDetectTi No access detect BTS3900, BTS3900 CELLNOACCESSA
mer timer LTE LMPARA
CellUlIcic
BTS3900, BTS3900 LST CELLULICIC
LocalCellId Local cell ID LTE MOD CELLULICIC
CellUlIcic
Uplink band division BTS3900, BTS3900 MOD CELLULICIC

BandMode scheme LTE LST CELLULICIC
LST
GERANINTERFCF
GeranInterfCfg G
MOD
BTS3900, BTS3900 GERANINTERFCF
LocalCellId Local cell ID LTE G
GeranInterfCfg
MOD
GERANINTERFCF
G
Number of DL RBs LST
DlGeranIntefRbNu interfered by BTS3900, BTS3900 GERANINTERFCF
m GERAN LTE G
GeranInterfCfg
MOD
GERANINTERFCF
G
LST
SINR threshold for BTS3900, BTS3900 GERANINTERFCF
DlRbAvailSinrThd available DL RBs LTE G
ADD
CELLSIMULOAD
DSP
CELLSIMULOAD
CellSimuLoad LST
CELLSIMULOAD
MOD
CELLSIMULOAD
LocalCellId Local cell ID LTE CELLSIMULOAD
CellSimuLoad
ADD
CELLSIMULOAD
MOD
CELLSIMULOAD
SimLoadCfgIndex Configure Index LTE CELLSIMULOAD
CellSimuLoad
ADD
CELLSIMULOAD
MOD
CELLSIMULOAD
SimuLoadTransMo SimuLoad BTS3900, BTS3900 LST
de transmission mode LTE CELLSIMULOAD
CellSimuLoad
SimuLoad allocated BTS3900, BTS3900 DSP

SimuLoadRbNum RB Number LTE CELLSIMULOAD
CellSimuLoad
Commercial service BTS3900, BTS3900 DSP
CommercRbNum RB number LTE CELLSIMULOAD
CellSimuLoad
SimuLoadPower power LTE CELLSIMULOAD
CellSimuLoad
CommercPower power LTE CELLSIMULOAD
CellSimuLoad

SimuLoadUserNum user Number LTE CELLSIMULOAD
CellSimuLoad

CommercUserNum user number LTE CELLSIMULOAD
BcchCfg
BTS3900, BTS3900 LST BCCHCFG
LocalCellId Local cell ID LTE MOD BCCHCFG
BcchCfg
Modification period BTS3900, BTS3900 MOD BCCHCFG

ModifyPeriodCoeff coefficient LTE LST BCCHCFG
LST
CellChPwrCfg CELLCHPWRCFG
LocalCellId Local cell ID LTE CELLCHPWRCFG
CellChPwrCfg
MOD
CELLCHPWRCFG
PcfichPwr PCFICH power LTE CELLCHPWRCFG
CellChPwrCfg
MOD
CELLCHPWRCFG
PbchPwr PBCH power LTE CELLCHPWRCFG
CellChPwrCfg
MOD
CELLCHPWRCFG
SchPwr SCH power LTE CELLCHPWRCFG
CellChPwrCfg
MOD
CELLCHPWRCFG
DbchPwr DBCH power LTE CELLCHPWRCFG
CellChPwrCfg
MOD
CELLCHPWRCFG
PchPwr PCH power LTE CELLCHPWRCFG
CellChPwrCfg
MOD
CELLCHPWRCFG
Rach response BTS3900, BTS3900 LST
RaRspPwr power LTE CELLCHPWRCFG
CellChPwrCfg
MOD
CELLCHPWRCFG
PrsPwr Prs power LTE CELLCHPWRCFG
PDSCHCfg
BTS3900, BTS3900 LST PDSCHCFG
LocalCellId Local cell ID LTE MOD PDSCHCFG
PDSCHCfg
ReferenceSignalPw Reference signal BTS3900, BTS3900 MOD PDSCHCFG

r power LTE LST PDSCHCFG
PDSCHCfg
BTS3900, BTS3900 MOD PDSCHCFG

Pb PB LTE LST PDSCHCFG
PDSCHCfg
ReferenceSignalPw Reference signal BTS3900, BTS3900 MOD PDSCHCFG

rMargin power margin LTE LST PDSCHCFG
RACHCfg
BTS3900, BTS3900 LST RACHCFG
LocalCellId Local cell ID LTE MOD RACHCFG
RACHCfg
BTS3900, BTS3900 MOD RACHCFG

PwrRampingStep Power ramping step LTE LST RACHCFG
RACHCfg
Preamble initial
PreambInitRcvTarg received target BTS3900, BTS3900 MOD RACHCFG
etPwr power LTE LST RACHCFG
RACHCfg
MessageSizeGroup Message size of BTS3900, BTS3900 MOD RACHCFG

A select group A LTE LST RACHCFG
RACHCfg
PRACH Frequency BTS3900, BTS3900 MOD RACHCFG

PrachFreqOffset Offset LTE LST RACHCFG
RACHCfg
Indication of
PrachConfigIndexC PRACH BTS3900, BTS3900 MOD RACHCFG
fgInd Configuration Index LTE LST RACHCFG
RACHCfg
PRACH BTS3900, BTS3900 MOD RACHCFG

PrachConfigIndex Configuration Index LTE LST RACHCFG
RACHCfg
Maximum number
of preamble BTS3900, BTS3900 MOD RACHCFG
PreambleTransMax transmission LTE LST RACHCFG
RACHCfg
ContentionResoluti Timer for contention BTS3900, BTS3900 MOD RACHCFG

onTimer resolution LTE LST RACHCFG
RACHCfg
Maximum number
of Msg3 HARQ BTS3900, BTS3900 MOD RACHCFG
MaxHarqMsg3Tx transmissions LTE LST RACHCFG
SRSCfg DSP SRSCFG

BTS3900, BTS3900 LST SRSCFG
LocalCellId Local cell ID LTE MOD SRSCFG
SRSCfg
SRS subframe BTS3900, BTS3900 MOD SRSCFG

SrsSubframeCfg configuration LTE LST SRSCFG
SRSCfg
SRS ACK/NACK
simultaneous BTS3900, BTS3900 MOD SRSCFG
AnSrsSimuTrans transmission LTE LST SRSCFG
SRSCfg
SRS Configuration BTS3900, BTS3900 MOD SRSCFG

SrsCfgInd Indicator LTE LST SRSCFG
SRSCfg
TDD SRS BTS3900, BTS3900 MOD SRSCFG

TddSrsCfgMode Configuration Mode LTE LST SRSCFG
SRSCfg
CellSrsBandwidthCf Cell srs bandwidth BTS3900, BTS3900

g configuration LTE DSP SRSCFG
PHICHCfg
BTS3900, BTS3900 LST PHICHCFG
LocalCellId Local cell ID LTE MOD PHICHCFG
PHICHCfg
BTS3900, BTS3900 MOD PHICHCFG

PhichDuration PHICH duration LTE LST PHICHCFG
PHICHCfg
BTS3900, BTS3900 MOD PHICHCFG

PhichResource PHICH resource LTE LST PHICHCFG
PCCHCfg
BTS3900, BTS3900 LST PCCHCFG
LocalCellId Local cell ID LTE MOD PCCHCFG
PCCHCfg
Default paging BTS3900, BTS3900 MOD PCCHCFG

DefaultPagingCycle cycle LTE LST PCCHCFG
PCCHCfg
BTS3900, BTS3900 MOD PCCHCFG

Nb NB LTE LST PCCHCFG
PCCHCfg
Paging Sent BTS3900, BTS3900 MOD PCCHCFG

PagingSentNum Number LTE LST PCCHCFG
PUSCHCfg
BTS3900, BTS3900 LST PUSCHCFG
LocalCellId Local cell ID LTE MOD PUSCHCFG
PUSCHCfg
BTS3900, BTS3900 MOD PUSCHCFG

Nsb Subband number LTE LST PUSCHCFG
PUSCHCfg
HoppingMode Hopping mode LTE LST PUSCHCFG
PUSCHCfg

HoppingOffset Hopping offset LTE LST PUSCHCFG
PUSCHCfg
GroupHoppingEnab Group hopping BTS3900, BTS3900 MOD PUSCHCFG

led enabled LTE LST PUSCHCFG
PUSCHCfg
GroupAssignPUSC Group assignment BTS3900, BTS3900 MOD PUSCHCFG

H PUSCH LTE LST PUSCHCFG
PUSCHCfg
SeqHoppingEnable Sequence hopping BTS3900, BTS3900 MOD PUSCHCFG

d enabled LTE LST PUSCHCFG
PUSCHCfg

CyclicShift Cyclic shift LTE LST PUSCHCFG
PUSCHCfg

Qam64Enabled Qam64 enabled LTE LST PUSCHCFG
PUCCHCfg
BTS3900, BTS3900 LST PUCCHCFG
LocalCellId Local cell ID LTE MOD PUCCHCFG
PUCCHCfg
BTS3900, BTS3900 MOD PUCCHCFG

DeltaShift Delta shift LTE LST PUCCHCFG
PUCCHCfg
ACK/SRI Channel BTS3900, BTS3900 MOD PUCCHCFG

NaSriChNum Number LTE LST PUCCHCFG
PUCCHCfg
BTS3900, BTS3900 MOD PUCCHCFG

CqiRbNum CQI RB number LTE LST PUCCHCFG
PUCCHCfg
PucchExtendedRB PUCCH Extended BTS3900, BTS3900 MOD PUCCHCFG

Num RB Number LTE LST PUCCHCFG
ADD
CDMA20001XRTT
PREREG
LST
CDMA20001XRTT
Cdma20001XrttPreR PREREG
MOD
CDMA20001XRTT
PREREG
RMV
BTS3900, BTS3900 CDMA20001XRTT
LocalCellId Local cell ID LTE PREREG
ADD
Cdma20001XrttPreR CDMA20001XRTT
PREREG
LST
CDMA20001XRTT
PREREG
MOD
CDMA20001XRTT
PREREG
RMV
Mobile country BTS3900, BTS3900 CDMA20001XRTT
Mcc code LTE PREREG
ADD
PREREG
LST
CDMA20001XRTT
PREREG
MOD
CDMA20001XRTT
PREREG
RMV
Mobile network BTS3900, BTS3900 CDMA20001XRTT
Mnc code LTE PREREG
Cdma20001XrttPreR
ADD
CDMA20001XRTT
PREREG
MOD
CDMA20001XRTT
PREREG
LST
Cdma20001XrttCell CDMA20001XRTT BTS3900, BTS3900 CDMA20001XRTT
Id cell ID LTE PREREG
ADD
PREREG
MOD
CDMA20001XRTT
PREREG
LST
Cdma20001XrttSec CDMA20001XRTT BTS3900, BTS3900 CDMA20001XRTT
torId sector ID LTE PREREG
ADD
PREREG
MOD
CDMA20001XRTT
PREREG
LST
Sid System ID LTE PREREG
Cdma20001XrttPreR
ADD
CDMA20001XRTT
PREREG
MOD
CDMA20001XRTT
PREREG
LST
Nid Network ID LTE PREREG
Cdma20001XrttPreR
ADD
CDMA20001XRTT
PREREG
MOD
CDMA20001XRTT
PREREG
LST
MscId MSC ID LTE PREREG
Cdma20001XrttPreR
ADD
CDMA20001XRTT
PREREG
MOD
CDMA20001XRTT
PREREG
LST
Band class include BTS3900, BTS3900 CDMA20001XRTT
BandClassInclude indicator LTE PREREG
Cdma20001XrttPreR
ADD
CDMA20001XRTT
PREREG
MOD
CDMA20001XRTT
PREREG
LST
BandClass Band class LTE PREREG
Cdma20001XrttPreR
ADD
CDMA20001XRTT
PREREG
MOD
CDMA20001XRTT
PREREG
CSFB-registration LST
parameters BTS3900, BTS3900 CDMA20001XRTT
CsfbRegCfgInd configure indicator LTE PREREG
ADD
CDMA20001XRTT
MOD
CDMA20001XRTT
PREREG
LST
Multiple system ID BTS3900, BTS3900 CDMA20001XRTT
MultiSidInd storage indicator LTE PREREG
ADD
PREREG
MOD
CDMA20001XRTT
PREREG
LST
Multiple network ID BTS3900, BTS3900 CDMA20001XRTT
MultiNidInd storage indicator LTE PREREG
Cdma20001XrttPreR
ADD
CDMA20001XRTT
PREREG
MOD
CDMA20001XRTT
PREREG
LST
Home rgistration BTS3900, BTS3900 CDMA20001XRTT
HomeRegInd indicator LTE PREREG
Cdma20001XrttPreR
ADD
CDMA20001XRTT
PREREG
MOD
CDMA20001XRTT
PREREG
System ID roamer LST
registration BTS3900, BTS3900 CDMA20001XRTT
ForeignSidRegInd indicator LTE PREREG
Cdma20001XrttPreR ADD
CDMA20001XRTT
PREREG
MOD
CDMA20001XRTT
PREREG
Network ID roamer LST
ForeignNidRegInd indicator LTE PREREG
Cdma20001XrttPreR
ADD
CDMA20001XRTT
PREREG
MOD
CDMA20001XRTT
PREREG
Parameter change LST
ParamRegInd indicator LTE PREREG
Cdma20001XrttPreR
ADD
CDMA20001XRTT
PREREG
MOD
CDMA20001XRTT
PREREG
Power up LST
PowerUpRegInd indicator LTE PREREG
Cdma20001XrttPreR
ADD
CDMA20001XRTT
PREREG
MOD
CDMA20001XRTT
PREREG
LST
RegPeriod Registration period LTE PREREG
Cdma20001XrttPreR
ADD
CDMA20001XRTT
PREREG
MOD
CDMA20001XRTT
PREREG
LST
RegZone Registration zone LTE PREREG
Cdma20001XrttPreR
ADD
CDMA20001XRTT
PREREG
MOD
CDMA20001XRTT
PREREG
Number of LST
registration zones BTS3900, BTS3900 CDMA20001XRTT
TotalZone to be retained LTE PREREG
Cdma20001XrttPreR
ADD
CDMA20001XRTT
PREREG
MOD
CDMA20001XRTT
PREREG
LST
ZoneTimer Zone timer length LTE PREREG
ADD
CDMA20001XRTT
PREREG
MOD
PREREG
Power-down LST
registration include BTS3900, BTS3900 CDMA20001XRTT
PowerDownInclude indicator LTE PREREG
ADD
CDMA20001XRTT
PREREG
MOD
PREREG
AC barring LST
information BTS3900, BTS3900 CDMA20001XRTT
AcBarCfgInd configure indicator LTE PREREG
Cdma20001XrttPreR
ADD
CDMA20001XRTT
PREREG
MOD
CDMA20001XRTT
PREREG
Persistence value LST
for access overload BTS3900, BTS3900 CDMA20001XRTT
AcBar0to9 classes 0 to 9 LTE PREREG
CDMA20001XRTT
PREREG
MOD
CDMA20001XRTT
PREREG
AcBar10 class 10 LTE PREREG
CDMA20001XRTT
PREREG
MOD
CDMA20001XRTT
PREREG
CDMA20001XRTT
PREREG
MOD
CDMA20001XRTT
PREREG
CDMA20001XRTT
PREREG
MOD
CDMA20001XRTT
PREREG
CDMA20001XRTT
PREREG
MOD
CDMA20001XRTT
PREREG
CDMA20001XRTT
PREREG
MOD
CDMA20001XRTT
PREREG
CDMA20001XRTT
PREREG
MOD
Persistence CDMA20001XRTT
Modifier For Access PREREG
barring factor for LST
message BTS3900, BTS3900 CDMA20001XRTT
AcBarMsg transmissions LTE PREREG
ADD
CDMA20001XRTT
PREREG
Cdma20001XrttPreR MOD
CDMA20001XRTT
Persistence PREREG
modifier For Access LST
barring factor for BTS3900, BTS3900 CDMA20001XRTT
AcBarReg registrations LTE PREREG
Cdma20001XrttPreR
ADD
CDMA20001XRTT
PREREG
MOD
CDMA20001XRTT
Persistence PREREG
modifier For Access LST
barring factor for BTS3900, BTS3900 CDMA20001XRTT
AcBarEmg emergency service LTE PREREG
ADD
CDMA20001XRTT
PREREG
MOD
PREREG
Protocol revision LST
level include BTS3900, BTS3900 CDMA20001XRTT
ProtocolRevInc indicator LTE PREREG
ADD
PREREG
MOD
CDMA20001XRTT
PREREG
LST
Protocol revision BTS3900, BTS3900 CDMA20001XRTT
ProtocolRev level LTE PREREG
ADD
CDMA20001XRTT
PREREG
MOD
PREREG
Min protocol LST
revision level BTS3900, BTS3900 CDMA20001XRTT
MinProtocolRevInc include indicator LTE PREREG
ADD
CDMA20001XRTT
PREREG
MOD
Cdma20001XrttPreR
CDMA20001XRTT
PREREG
LST
Min protocol BTS3900, BTS3900 CDMA20001XRTT
MinProtocolRev revision level LTE PREREG
ADD
CDMA20001XRTT
PREREG
MOD
PREREG
LST
Authentication BTS3900, BTS3900 CDMA20001XRTT
AuthInclude include indicator LTE PREREG
ADD
CDMA20001XRTT
PREREG
MOD
Cdma20001XrttPreR
CDMA20001XRTT
PREREG
LST
Authentication BTS3900, BTS3900 CDMA20001XRTT
Auth indicator LTE PREREG
ADD
CDMA20001XRTT
PREREG
MOD
Max number of PREREG
alternative service LST
MaxNumAltSoInclu options include BTS3900, BTS3900 CDMA20001XRTT
de indicator LTE PREREG
Cdma20001XrttPreR
ADD
CDMA20001XRTT
PREREG
MOD
CDMA20001XRTT
PREREG
Max number of LST
alternative srvice BTS3900, BTS3900 CDMA20001XRTT
MaxNumAltSo options LTE PREREG
ADD
CDMA20001XRTT
PREREG
MOD
Cdma20001XrttPreR
CDMA20001XRTT
PREREG
Preferred ACH MS LST
PrefMsIdTypeInclud ID type include BTS3900, BTS3900 CDMA20001XRTT
e indicator LTE PREREG
ADD
CDMA20001XRTT
MOD
CDMA20001XRTT
PREREG
LST
Preferred ACH MS BTS3900, BTS3900 CDMA20001XRTT
PrefMsIdType ID type LTE PREREG
ADD
PREREG
MOD
CDMA20001XRTT
PREREG
Mobile country LST
code include BTS3900, BTS3900 CDMA20001XRTT
MccInclude indicator LTE PREREG
ADD
PREREG
MOD
CDMA20001XRTT
PREREG
LST
MncInclude code send indicator LTE PREREG
ADD
CDMA20001XRTT
PREREG
MOD
Cdma20001XrttPreR
CDMA20001XRTT
PREREG
LST
ImsiTSupportedIncl IMSI_T supported BTS3900, BTS3900 CDMA20001XRTT
ude include indicator LTE PREREG
Cdma20001XrttPreR
ADD
CDMA20001XRTT
PREREG
MOD
CDMA20001XRTT
PREREG
LST
IMSI_T support BTS3900, BTS3900 CDMA20001XRTT
ImsiTSupported indicator LTE PREREG
ADD
CDMA20001XRTT
PREREG
Cdma20001XrttPreR MOD
CDMA20001XRTT
Forword power PREREG
control parameter LST
of FCH include BTS3900, BTS3900 CDMA20001XRTT
FpcFchCfgInclude indicator LTE PREREG
ADD
CDMA20001XRTT
PREREG
MOD
PREREG
RC3 initial setpoint LST
of forword power BTS3900, BTS3900 CDMA20001XRTT
FpcFchInitSteptRc3 control parameter LTE PREREG
ADD
CDMA20001XRTT
PREREG
MOD
PREREG
ADD
CDMA20001XRTT
PREREG
MOD
PREREG
ADD
CDMA20001XRTT
PREREG
MOD
PREREG
FpcFchInitSteptRc1 of forword power BTS3900, BTS3900 CDMA20001XRTT
1 control parameter LTE PREREG
ADD
CDMA20001XRTT
PREREG
MOD
PREREG
FpcFchInitSteptRc1 of forword power BTS3900, BTS3900 CDMA20001XRTT
2 control parameter LTE PREREG
ADD
CDMA20001XRTT
PREREG
MOD
Pilot PN sequence PREREG
offset index LST
increment include BTS3900, BTS3900 CDMA20001XRTT
PilotIncrInclude indicator LTE PREREG
Cdma20001XrttPreR
ADD
CDMA20001XRTT
PREREG
MOD
CDMA20001XRTT
PREREG
Pilot PN sequence LST
offset index BTS3900, BTS3900 CDMA20001XRTT
PilotIncr increment LTE PREREG
ADD
CDMA20001XRTT
MOD
CDMA20001XRTT
PREREG
LST
Leap seconds BTS3900, BTS3900 CDMA20001XRTT
LpSecInclude include indicator LTE PREREG
ADD
PREREG
MOD
CDMA20001XRTT
PREREG
LST
Time zone include BTS3900, BTS3900 CDMA20001XRTT
LtmOffInclude indicator LTE PREREG
CDMA20001XRTT
PREREG
MOD
CDMA20001XRTT
PREREG
LST
Daylight flag BTS3900, BTS3900 CDMA20001XRTT
DayltInclude include indicator LTE PREREG
ADD
CDMA20001XRTT
MOD
CDMA20001XRTT
PREREG
GCSNA layer2 LST
GcsnaL2AckTimerI acknowledge timer BTS3900, BTS3900 CDMA20001XRTT
nclude include indicator LTE PREREG
Cdma20001XrttPreR
ADD
CDMA20001XRTT
PREREG
MOD
CDMA20001XRTT
PREREG
LST
GCSNA layer2 BTS3900, BTS3900 CDMA20001XRTT
GcsnaL2AckTimer acknowledge timer LTE PREREG
ADD
CDMA20001XRTT
MOD
CDMA20001XRTT
PREREG
GCSNA sequence LST
GcsnaSeqContextT context timer BTS3900, BTS3900 CDMA20001XRTT
Include include indicator LTE PREREG
Cdma20001XrttPreR
ADD
CDMA20001XRTT
PREREG
MOD
CDMA20001XRTT
PREREG
LST
GcsnaSeqContextTi GCSNA sequence BTS3900, BTS3900 CDMA20001XRTT
mer context timer LTE PREREG
ADD
CDMA2000HRPDN
CELL
LST
CDMA2000HRPDN
Cdma2000HrpdNCell CELL
MOD
CDMA2000HRPDN
CELL
RMV
BTS3900, BTS3900 CDMA2000HRPDN
LocalCellId Local cell ID LTE CELL
Cdma2000HrpdNCell
ADD
CDMA2000HRPDN
CELL
LST
CDMA2000HRPDN
CELL
MOD
CDMA2000HRPDN
CELL
RMV
SectorId104 SectorID104 LTE CELL
Cdma2000HrpdNCell
ADD
CDMA2000HRPDN
CELL
LST
CDMA2000HRPDN
CELL
MOD
CDMA2000HRPDN
CELL
RMV
SectorId24 SectorID24 LTE CELL
ADD
CDMA2000HRPDN
CELL
LST
CDMA2000HRPDN
MOD
CDMA2000HRPDN
CELL
RMV
BandClass Band class LTE CELL
ADD
CDMA2000HRPDN
CELL
LST
CDMA2000HRPDN
MOD
CDMA2000HRPDN
CELL
RMV
Frequency Frequency LTE CELL
ADD
CDMA2000HRPDN
CELL
MOD
Cdma2000HrpdNCell
CDMA2000HRPDN
CELL
LST
No handover BTS3900, BTS3900 CDMA2000HRPDN
NoHoFlag indicator LTE CELL
ADD
CDMA2000HRPDN
CELL
MOD
Cdma2000HrpdNCell CDMA2000HRPDN
CELL
LST
NoRmvFlag No remove indicator LTE CELL
Cdma2000HrpdNCell
LST
AnrFlag ANR flag LTE CELL
Cdma2000HrpdNCell
ADD
CDMA2000HRPDN
CELL
MOD
CDMA2000HRPDN
CELL
LST
LocalCellName Local cell name LTE CELL
Cdma2000HrpdNCell
ADD
CDMA2000HRPDN
CELL
MOD
CDMA2000HRPDN
CELL
LST
NeighbourCellNam Neighbour cell BTS3900, BTS3900 CDMA2000HRPDN
e name LTE CELL
Cdma2000HrpdNCell
ADD
CDMA2000HRPDN
CELL
MOD
CDMA2000HRPDN
CELL
LST
CtrlMode Control Mode LTE CELL
ADD
CDMA2000HRPDP
REREG
LST
CDMA2000HRPDP
Cdma2000HrpdPreR REREG
MOD
CDMA2000HRPDP
REREG
RMV
BTS3900, BTS3900 CDMA2000HRPDP
LocalCellId Local cell ID LTE REREG
Cdma2000HrpdPreR
ADD
CDMA2000HRPDP
REREG
LST
CDMA2000HRPDP
REREG
MOD
CDMA2000HRPDP
REREG
RMV
Mobile country BTS3900, BTS3900 CDMA2000HRPDP
Mcc code LTE REREG
Cdma2000HrpdPreR
ADD
CDMA2000HRPDP
REREG
LST
CDMA2000HRPDP
REREG
MOD
CDMA2000HRPDP
REREG
RMV
Mobile network BTS3900, BTS3900 CDMA2000HRPDP
Mnc code LTE REREG
Cdma2000HrpdPreR
ADD
CDMA2000HRPDP
REREG
MOD
CDMA2000HRPDP
REREG
SIB8 Pre- LST
Sib8PreRegistration registration allowed BTS3900, BTS3900 CDMA2000HRPDP
Allowed indicator LTE REREG
ADD
CDMA2000HRPDP
REREG
MOD
Cdma2000HrpdPreR
CDMA2000HRPDP
PreRegistrationInfo REREG
HRPD configure LST
McPreRegParaCfgI indicator in BTS3900, BTS3900 CDMA2000HRPDP
nd MeasConfig LTE REREG
ADD
CDMA2000HRPDP
Cdma2000HrpdPreR REREG
MOD
CDMA2000HRPDP
REREG
Pre-registration LST
McPreRegistrationA allowed indicator in BTS3900, BTS3900 CDMA2000HRPDP
llowed MeasConfig LTE REREG
ADD
Cdma2000HrpdPreR CDMA2000HRPDP
REREG
MOD
CDMA2000HRPDP
REREG
LST
PreRegistrationZon Pre-registration BTS3900, BTS3900 CDMA2000HRPDP
eId zone ID LTE REREG
Cdma2000HrpdPreR
ADD
CDMA2000HRPDP
REREG
MOD
CDMA2000HRPDP
Secondary pre- REREG
registration zone ID LST
SecondaryPreRegZ 0 configure BTS3900, BTS3900 CDMA2000HRPDP
oneId0Ind indicator LTE REREG
ADD
REREG
MOD
CDMA2000HRPDP
REREG
Secondary pre- LST
SecondaryPreRegZ registration zone ID BTS3900, BTS3900 CDMA2000HRPDP
oneId0 0 LTE REREG
Cdma2000HrpdPreR
ADD
CDMA2000HRPDP
REREG
MOD
CDMA2000HRPDP
Secondary pre- REREG
registration zone ID LST
SecondaryPreRegZ 1 configure BTS3900, BTS3900 CDMA2000HRPDP
oneId1Ind indicator LTE REREG
ADD
REREG
MOD
CDMA2000HRPDP
REREG
Secondary pre- LST
SecondaryPreRegZ registration zone ID BTS3900, BTS3900 CDMA2000HRPDP
oneId1 1 LTE REREG
ADD
CDMA2000HRPDR
EFCELL
LST
CDMA2000HRPDR
Cdma2000HrpdRefCe EFCELL
MOD
CDMA2000HRPDR
EFCELL
RMV
BTS3900, BTS3900 CDMA2000HRPDR
LocalCellId Local cell ID LTE EFCELL
Cdma2000HrpdRefCe ADD
CDMA2000HRPDR
EFCELL
LST
CDMA2000HRPDR
EFCELL
MOD
CDMA2000HRPDR
EFCELL
RMV
Mobile country BTS3900, BTS3900 CDMA2000HRPDR
Mcc code LTE EFCELL
Cdma2000HrpdRefCe ADD
CDMA2000HRPDR
EFCELL
LST
CDMA2000HRPDR
EFCELL
MOD
CDMA2000HRPDR
EFCELL
RMV
Mobile network BTS3900, BTS3900 CDMA2000HRPDR
Mnc code LTE EFCELL
Cdma2000HrpdRefCe
ADD
CDMA2000HRPDR
EFCELL
LST
CDMA2000HRPDR
EFCELL
MOD
CDMA2000HRPDR
EFCELL
RMV
SectorId104 SectorID104 LTE EFCELL
Cdma2000HrpdRefCe
ADD
CDMA2000HRPDR
EFCELL
LST
CDMA2000HRPDR
EFCELL
MOD
CDMA2000HRPDR
EFCELL
RMV
SectorId24 SectorID24 LTE EFCELL
Cdma2000HrpdRefCe
ADD
CDMA2000HRPDR
EFCELL
MOD
CDMA2000HRPDR
EFCELL
LST
SelectedRatio Selected ratio LTE EFCELL
ADD
CDMA2000NFREQ
LST
Cdma2000Nfreq CDMA2000NFREQ
MOD
CDMA2000NFREQ
LocalCellId Local cell ID LTE CDMA2000NFREQ
ADD
LST
CDMA2000NFREQ
MOD
CDMA2000NFREQ
BandClass Band class LTE CDMA2000NFREQ
ADD
CDMA2000NFREQ
Cdma2000Nfreq LST
CDMA2000NFREQ
MOD
CDMA2000NFREQ
Frequency Frequency LTE CDMA2000NFREQ
Cdma2000Nfreq
ADD
CDMA2000NFREQ
MOD
CDMA2000NFREQ
OffsetFreq Frequency offset LTE CDMA2000NFREQ
ADD
MOD
CDMA2000NFREQ
SearchWindowSize Search window size BTS3900, BTS3900 LST
CfgInd configure indicator LTE CDMA2000NFREQ
Cdma2000Nfreq
ADD
CDMA2000NFREQ
MOD
CDMA2000NFREQ
SearchWindowSize Search window size LTE CDMA2000NFREQ
Cdma2000Nfreq
ADD
CDMA2000NFREQ
MOD
CDMA2000NFREQ
FrequencyPri Frequency priority LTE CDMA2000NFREQ
EutranExternalCellP ADD
EUTRANEXTERNA
LCELLPLMN
LST
EUTRANEXTERNA
LCELLPLMN
RMV
Mobile country BTS3900, BTS3900 EUTRANEXTERNA
Mcc code LTE LCELLPLMN
EutranExternalCellP ADD
EUTRANEXTERNA
LCELLPLMN
LST
EUTRANEXTERNA
LCELLPLMN
RMV
Mobile network BTS3900, BTS3900 EUTRANEXTERNA
Mnc code LTE LCELLPLMN
EutranExternalCellP
ADD
EUTRANEXTERNA
LCELLPLMN
LST
EUTRANEXTERNA
LCELLPLMN
RMV
BTS3900, BTS3900 EUTRANEXTERNA
eNodeBId eNodeB ID LTE LCELLPLMN
EutranExternalCellP
ADD
EUTRANEXTERNA
LCELLPLMN
LST
EUTRANEXTERNA
LCELLPLMN
RMV
CellId Cell ID LTE LCELLPLMN
EutranExternalCellP
ADD
EUTRANEXTERNA
LCELLPLMN
LST
EUTRANEXTERNA
LCELLPLMN
RMV
Share mobile BTS3900, BTS3900 EUTRANEXTERNA
ShareMcc country code LTE LCELLPLMN
EutranExternalCellP
ADD
EUTRANEXTERNA
LCELLPLMN
LST
EUTRANEXTERNA
LCELLPLMN
RMV
Share mobile BTS3900, BTS3900 EUTRANEXTERNA
ShareMnc network code LTE LCELLPLMN
ADD
GERANEXTERNAL
CELLPLMN
LST
GeranExternalCellP GERANEXTERNAL
CELLPLMN
RMV
BTS3900, BTS3900 GERANEXTERNAL
GeranCellId GERAN cell ID LTE CELLPLMN
ADD
GERANEXTERNAL
CELLPLMN
LST
GeranExternalCellP GERANEXTERNAL
CELLPLMN
RMV
Lac Location area code LTE CELLPLMN
GeranExternalCellP ADD
GERANEXTERNAL
CELLPLMN
LST
GERANEXTERNAL
CELLPLMN
RMV
Mobile country BTS3900, BTS3900 GERANEXTERNAL
Mcc code LTE CELLPLMN
GeranExternalCellP ADD
GERANEXTERNAL
CELLPLMN
LST
GERANEXTERNAL
CELLPLMN
RMV
Mobile network BTS3900, BTS3900 GERANEXTERNAL
Mnc code LTE CELLPLMN
GeranExternalCellP
ADD
GERANEXTERNAL
CELLPLMN
LST
GERANEXTERNAL
CELLPLMN
RMV
Share mobile BTS3900, BTS3900 GERANEXTERNAL
ShareMcc country code LTE CELLPLMN
GeranExternalCellP
ADD
GERANEXTERNAL
CELLPLMN
LST
GERANEXTERNAL
CELLPLMN
RMV
Share mobile BTS3900, BTS3900 GERANEXTERNAL
ShareMnc network code LTE CELLPLMN
UtranExternalCellPl ADD
UTRANEXTERNAL
CELLPLMN
LST
UTRANEXTERNAL
CELLPLMN
RMV
Mobile country BTS3900, BTS3900 UTRANEXTERNAL
Mcc code LTE CELLPLMN
UtranExternalCellPl ADD
UTRANEXTERNAL
CELLPLMN
LST
UTRANEXTERNAL
CELLPLMN
RMV
Mobile network BTS3900, BTS3900 UTRANEXTERNAL
Mnc code LTE CELLPLMN
UtranExternalCellPl
ADD
UTRANEXTERNAL
CELLPLMN
LST
UTRANEXTERNAL
CELLPLMN
RMV
BTS3900, BTS3900 UTRANEXTERNAL
RncId RNC ID LTE CELLPLMN
UtranExternalCellPl
ADD
UTRANEXTERNAL
CELLPLMN
LST
UTRANEXTERNAL
CELLPLMN
RMV
CellId RNC cell ID LTE CELLPLMN
UtranExternalCellPl
ADD
UTRANEXTERNAL
CELLPLMN
LST
UTRANEXTERNAL
CELLPLMN
RMV
Share mobile BTS3900, BTS3900 UTRANEXTERNAL
ShareMcc country code LTE CELLPLMN
UtranExternalCellPl
ADD
UTRANEXTERNAL
CELLPLMN
LST
UTRANEXTERNAL
CELLPLMN
RMV
Share mobile BTS3900, BTS3900 UTRANEXTERNAL
ShareMnc network code LTE CELLPLMN
Cdma2000HrpdExtCe
ADD
CDMA2000HRPDE
XTCELL
LST
CDMA2000HRPDE
XTCELL
MOD
CDMA2000HRPDE
XTCELL
RMV
BTS3900, BTS3900 CDMA2000HRPDE
SectorId104 SectorID104 LTE XTCELL
Cdma2000HrpdExtCe
ADD
CDMA2000HRPDE
XTCELL
LST
CDMA2000HRPDE
XTCELL
MOD
CDMA2000HRPDE
XTCELL
RMV
SectorId24 SectorID24 LTE XTCELL
ADD
CDMA2000HRPDE
XTCELL
LST
CDMA2000HRPDE
Cdma2000HrpdExtCe XTCELL
MOD
CDMA2000HRPDE
XTCELL
RMV
BandClass Band class LTE XTCELL
ADD
CDMA2000HRPDE
XTCELL
LST
CDMA2000HRPDE
Cdma2000HrpdExtCe XTCELL
MOD
CDMA2000HRPDE
XTCELL
RMV
Frequency Frequency LTE XTCELL
Cdma2000HrpdExtCe
ADD
CDMA2000HRPDE
XTCELL
MOD
CDMA2000HRPDE
XTCELL
LST
Mobile country BTS3900, BTS3900 CDMA2000HRPDE
Mcc code LTE XTCELL
Cdma2000HrpdExtCe
ADD
CDMA2000HRPDE
XTCELL
MOD
CDMA2000HRPDE
XTCELL
LST
Mobile network BTS3900, BTS3900 CDMA2000HRPDE
Mnc code LTE XTCELL
ADD
Cdma2000HrpdExtCe CDMA2000HRPDE
XTCELL
MOD
CDMA2000HRPDE
XTCELL
LST
PnOffset Physical cell ID LTE XTCELL
Cdma2000HrpdExtCe
ADD
CDMA2000HRPDE
XTCELL
MOD
CDMA2000HRPDE
XTCELL
LST
CellName Cell name LTE XTCELL
Cdma2000HrpdExtCe
ADD
CDMA2000HRPDE
XTCELL
MOD
CDMA2000HRPDE
XTCELL
LST
CtrlMode Control Mode LTE XTCELL
ADD
Cdma20001XrttExtCe CDMA20001XRTT
EXTCELL
LST
CDMA20001XRTT
EXTCELL
MOD
CDMA20001XRTT
EXTCELL
RMV
Id cell ID LTE EXTCELL
ADD
CDMA20001XRTT
EXTCELL
LST
EXTCELL
MOD
CDMA20001XRTT
EXTCELL
RMV
torId sector ID LTE EXTCELL
ADD
CDMA20001XRTT
EXTCELL
LST
CDMA20001XRTT
Cdma20001XrttExtCe EXTCELL
MOD
CDMA20001XRTT
EXTCELL
RMV
BandClass Band class LTE EXTCELL
ADD
CDMA20001XRTT
EXTCELL
LST
CDMA20001XRTT
MOD
CDMA20001XRTT
EXTCELL
RMV
Frequency Frequency LTE EXTCELL
ADD
CDMA20001XRTT
EXTCELL
LST
EXTCELL
MOD
CDMA20001XRTT
EXTCELL
RMV
Sid System ID LTE EXTCELL
Cdma20001XrttExtCe
ADD
CDMA20001XRTT
EXTCELL
LST
CDMA20001XRTT
EXTCELL
MOD
CDMA20001XRTT
EXTCELL
RMV
Nid Network ID LTE EXTCELL
Cdma20001XrttExtCe
ADD
CDMA20001XRTT
EXTCELL
MOD
CDMA20001XRTT
EXTCELL
LST
Mobile country BTS3900, BTS3900 CDMA20001XRTT
Mcc code LTE EXTCELL
Cdma20001XrttExtCe
ADD
CDMA20001XRTT
EXTCELL
MOD
CDMA20001XRTT
EXTCELL
LST
Mnc code LTE EXTCELL
Cdma20001XrttExtCe
ADD
CDMA20001XRTT
EXTCELL
MOD
CDMA20001XRTT
EXTCELL
LST
MscId MSC ID LTE EXTCELL
ADD
CDMA20001XRTT
MOD
CDMA20001XRTT
EXTCELL
LST
PnOffset Physical cell ID LTE EXTCELL
ADD
CDMA20001XRTT
EXTCELL
MOD
Cdma20001XrttExtCe
CDMA20001XRTT
EXTCELL
LST
CellName Cell name LTE EXTCELL
Cdma20001XrttExtCe
ADD
CDMA20001XRTT
EXTCELL
MOD
CDMA20001XRTT
EXTCELL
LST
CtrlMode Control Mode LTE EXTCELL
ADD
CDMA20001XRTT
NCELL
LST
CDMA20001XRTT
Cdma20001XrttNCell NCELL
MOD
CDMA20001XRTT
NCELL
RMV
LocalCellId Local cell ID LTE NCELL
ADD
CDMA20001XRTT
NCELL
Cdma20001XrttNCell LST
CDMA20001XRTT
NCELL
MOD
CDMA20001XRTT
NCELL
RMV
Id cell ID LTE NCELL
ADD
CDMA20001XRTT
NCELL
LST
Cdma20001XrttNCell CDMA20001XRTT
NCELL
MOD
CDMA20001XRTT
NCELL
RMV
torId sector ID LTE NCELL
ADD
CDMA20001XRTT
NCELL
LST
CDMA20001XRTT
MOD
CDMA20001XRTT
NCELL
RMV
BandClass Band class LTE NCELL
ADD
CDMA20001XRTT
NCELL
LST
CDMA20001XRTT
MOD
CDMA20001XRTT
NCELL
RMV
Frequency Frequency LTE NCELL
ADD
CDMA20001XRTT
NCELL
LST
NCELL
MOD
CDMA20001XRTT
NCELL
RMV
Sid System ID LTE NCELL
ADD
CDMA20001XRTT
NCELL
LST
CDMA20001XRTT
MOD
CDMA20001XRTT
NCELL
RMV
Nid Network ID LTE NCELL
ADD
CDMA20001XRTT
NCELL
MOD
NCELL
LST
No handover BTS3900, BTS3900 CDMA20001XRTT
NoHoFlag indicator LTE NCELL
ADD
CDMA20001XRTT
NCELL
MOD
NCELL
LST
NoRmvFlag No remove indicator LTE NCELL
Cdma20001XrttNCell LST
AnrFlag ANR flag LTE NCELL
Cdma20001XrttNCell
ADD
CDMA20001XRTT
NCELL
MOD
CDMA20001XRTT
NCELL
LST
LocalCellName Local cell name LTE NCELL
Cdma20001XrttNCell
ADD
CDMA20001XRTT
NCELL
MOD
CDMA20001XRTT
NCELL
LST
NeighbourCellNam Neighbour cell BTS3900, BTS3900 CDMA20001XRTT
e name LTE NCELL
Cdma20001XrttNCell
ADD
CDMA20001XRTT
NCELL
MOD
CDMA20001XRTT
NCELL
LST
CtrlMode Control Mode LTE NCELL
ADD
CDMA2000BANDC
LASS
LST
CDMA2000BANDC
Cdma2000BandClas LASS
MOD
CDMA2000BANDC
LASS
RMV
BTS3900, BTS3900 CDMA2000BANDC
LocalCellId Local cell ID LTE LASS
ADD
CDMA2000BANDC
LASS
LST
CDMA2000BANDC
MOD
CDMA2000BANDC
LASS
RMV
BTS3900, BTS3900 CDMA2000BANDC
BandClass Band class LTE LASS
ADD
CDMA2000BANDC
MOD
CDMA2000BANDC
LASS
CDMA20001XRTT LST
Cdma20001XrttCell cell reselection BTS3900, BTS3900 CDMA2000BANDC
ReselInd indicator LTE LASS
Cdma2000BandClas
ADD
CDMA2000BANDC
LASS
MOD
CDMA2000BANDC
LASS
CDMA20001XRTT LST
Cdma20001XrttCell cell reselection BTS3900, BTS3900 CDMA2000BANDC
ReselPri priority LTE LASS
Cdma2000BandClas
ADD
CDMA2000BANDC
LASS
MOD
CDMA2000BANDC
LASS
CDMA20001XRTT LST
Cdma20001XrttThr high priority BTS3900, BTS3900 CDMA2000BANDC
eshXHigh threshold LTE LASS
Cdma2000BandClas
ADD
CDMA2000BANDC
LASS
MOD
CDMA2000BANDC
LASS
CDMA20001XRTT LST
Cdma20001XrttThr lower priority BTS3900, BTS3900 CDMA2000BANDC
eshXLow threshold LTE LASS
ADD
CDMA2000BANDC
MOD
CDMA2000BANDC
LASS
CDMA2000HRPD LST
Cdma2000HrpdCell cell reselection BTS3900, BTS3900 CDMA2000BANDC
ReselInd indicator LTE LASS
Cdma2000BandClas
ADD
CDMA2000BANDC
LASS
MOD
CDMA2000BANDC
LASS
CDMA2000HRPD LST
Cdma2000HrpdCell cell reselection BTS3900, BTS3900 CDMA2000BANDC
ReselPri priority LTE LASS
Cdma2000BandClas
ADD
CDMA2000BANDC
LASS
MOD
CDMA2000BANDC
LASS
CDMA2000HRPD LST
Cdma2000HrpdThr high priority BTS3900, BTS3900 CDMA2000BANDC
eshXHigh threshold LTE LASS
Cdma2000BandClas
ADD
CDMA2000BANDC
LASS
MOD
CDMA2000BANDC
LASS
CDMA2000HRPD LST
Cdma2000HrpdThr lower priority BTS3900, BTS3900 CDMA2000BANDC
eshXLow threshold LTE LASS
ADD
GERANEXTERNAL
CELL
LST
GeranExternalCell GERANEXTERNAL
CELL
MOD
GERANEXTERNAL
CELL
RMV
Mobile country BTS3900, BTS3900 GERANEXTERNAL
Mcc code LTE CELL
ADD
GERANEXTERNAL
CELL
LST
CELL
MOD
GERANEXTERNAL
CELL
RMV
Mobile network BTS3900, BTS3900 GERANEXTERNAL
Mnc code LTE CELL
ADD
GERANEXTERNAL
CELL
LST
GERANEXTERNAL
GeranExternalCell CELL
MOD
GERANEXTERNAL
CELL
RMV
GeranCellId GERAN cell ID LTE CELL
ADD
GERANEXTERNAL
CELL
LST
GERANEXTERNAL
GeranExternalCell CELL
MOD
GERANEXTERNAL
CELL
RMV
Lac Location area code LTE CELL
ADD
GERANEXTERNAL
CELL
GeranExternalCell MOD
GERANEXTERNAL
CELL
LST
Routing area code BTS3900, BTS3900 GERANEXTERNAL
RacCfgInd configure indicator LTE CELL
ADD
GERANEXTERNAL
CELL
MOD
CELL
LST
Rac Routing area code LTE CELL
GeranExternalCell
ADD
GERANEXTERNAL
CELL
MOD
GERANEXTERNAL
CELL
LST
BandIndicator Band indicator LTE CELL
ADD
GERANEXTERNAL
CELL
MOD
CELL
LST
GeranArfcn GERAN ARFCN LTE CELL
GeranExternalCell ADD
GERANEXTERNAL
CELL
MOD
GERANEXTERNAL
CELL
LST
NetworkColourCod BTS3900, BTS3900 GERANEXTERNAL
e Network color code LTE CELL
GeranExternalCell
ADD
GERANEXTERNAL
CELL
MOD
GERANEXTERNAL
CELL
LST
BaseStationColour Base station color BTS3900, BTS3900 GERANEXTERNAL
Code code LTE CELL
GERANEXTERNAL
CELL
MOD
GERANEXTERNAL
CELL
LST
DtmInd DTM indication LTE CELL
GeranExternalCell
ADD
GERANEXTERNAL
CELL
MOD
GERANEXTERNAL
CELL
LST
CellName Cell name LTE CELL
GERANEXTERNAL
CELL
MOD
GERANEXTERNAL
CELL
LST
CS and PS BTS3900, BTS3900 GERANEXTERNAL
CsPsHOInd handover indication LTE CELL
GeranExternalCell
ADD
GERANEXTERNAL
CELL
MOD
GERANEXTERNAL
CELL
LST
ADD
GERANNCELL
DSP
GERANRIMINFO
GeranNcell LST GERANNCELL
MOD
GERANNCELL
LocalCellId Local cell ID LTE GERANNCELL
GeranNcell ADD
GERANNCELL
LST GERANNCELL
MOD
GERANNCELL
RMV
GERANNCELL
Mobile country BTS3900, BTS3900 DSP
Mcc code LTE GERANRIMINFO
GeranNcell ADD
GERANNCELL
LST GERANNCELL
MOD
GERANNCELL
RMV
GERANNCELL
Mobile network BTS3900, BTS3900 DSP
Mnc code LTE GERANRIMINFO
ADD
GERANNCELL
LST GERANNCELL
MOD
GeranNcell GERANNCELL
RMV
GERANNCELL
Lac Location area code LTE GERANRIMINFO
ADD
GERANNCELL
GeranNcell LST GERANNCELL
MOD
GERANNCELL
RMV
GERANNCELL
GeranCellId GERAN cell ID LTE GERANRIMINFO
ADD
GeranNcell GERANNCELL
MOD
BTS3900, BTS3900 GERANNCELL
NoRmvFlag No remove indicator LTE LST GERANNCELL
ADD
GERANNCELL
GeranNcell MOD
No handover BTS3900, BTS3900 GERANNCELL
NoHoFlag indicator LTE LST GERANNCELL
GeranNcell
ADD
GERANNCELL
MOD
Blind handover BTS3900, BTS3900 GERANNCELL
BlindHoPriority priority LTE LST GERANNCELL
GeranNcell
BTS3900, BTS3900
AnrFlag ANR flag LTE LST GERANNCELL
GeranNcell
ADD
GERANNCELL
MOD
LocalCellName Local cell name LTE LST GERANNCELL
GeranNcell
ADD
GERANNCELL
MOD
NeighbourCellNam Neighbour cell BTS3900, BTS3900 GERANNCELL
e name LTE LST GERANNCELL
GeranNcell
ADD
GERANNCELL
MOD
CtrlMode Control Mode LTE LST GERANNCELL
GeranNcell

eNodeBId eNodeB ID LTE GERANRIMINFO
GeranNcell
GRimBeginningTim BTS3900, BTS3900 DSP
e Rim latest start time LTE GERANRIMINFO
GeranNcell
GLastRimUpdating Rim latest update BTS3900, BTS3900 DSP
Time time LTE GERANRIMINFO
ADD
GERANNFREQGR
OUP
LST
GERANNFREQGR
GeranNfreqGroup OUP
MOD
GERANNFREQGR
OUP
RMV
BTS3900, BTS3900 GERANNFREQGR
ADD
GERANNFREQGR
OUP
LST
GeranNfreqGroup GERANNFREQGR
OUP
MOD
GERANNFREQGR
OUP
RMV
BcchGroupId BCCH group ID LTE OUP
ADD
GERANNFREQGR
OUP
MOD
GeranNfreqGroup
GERANNFREQGR
OUP
LST
GeranVersion GERAN version LTE OUP
ADD
GERANNFREQGR
GeranNfreqGroup OUP
MOD
GERANNFREQGR
OUP
LST
StartingArfcn Starting ARFCN LTE OUP
GeranNfreqGroup
ADD
GERANNFREQGR
OUP
MOD
GERANNFREQGR
OUP
LST
BandIndicator Band indicator LTE OUP
ADD
OUP
MOD
GERANNFREQGR
OUP
CellReselPriorityCfg priority configure BTS3900, BTS3900 GERANNFREQGR
Ind indicator LTE OUP
GeranNfreqGroup
ADD
GERANNFREQGR
OUP
MOD
GERANNFREQGR
OUP
LST
Cell reselection BTS3900, BTS3900 GERANNFREQGR
CellReselPriority priority LTE OUP
ADD
OUP
MOD
GERANNFREQGR
OUP
LST
PMAX configure BTS3900, BTS3900 GERANNFREQGR
PmaxGeranCfgInd indicator LTE OUP
GeranNfreqGroup
ADD
GERANNFREQGR
OUP
MOD
GERANNFREQGR
OUP
LST
PmaxGeran PMAX LTE OUP
GeranNfreqGroup
ADD
GERANNFREQGR
OUP
MOD
GERANNFREQGR
OUP
LST
Minimum required BTS3900, BTS3900 GERANNFREQGR
QRxLevMin RX level LTE OUP
GeranNfreqGroup
ADD
GERANNFREQGR
OUP
MOD
GERANNFREQGR
OUP
LST
High priority BTS3900, BTS3900 GERANNFREQGR
ThreshXHigh threshold LTE OUP
GeranNfreqGroup
ADD
GERANNFREQGR
OUP
MOD
GERANNFREQGR
OUP
LST
Lower priority BTS3900, BTS3900 GERANNFREQGR
ThreshXLow threshold LTE OUP
GeranNfreqGroup
ADD
GERANNFREQGR
OUP
MOD
GERANNFREQGR
OUP
LST
OffsetFreq Frequency offset LTE OUP
ADD
GERANNFREQGR
GeranNfreqGroup OUP
MOD
GERANNFREQGR
OUP
LST
NCC monitoring BTS3900, BTS3900 GERANNFREQGR
NccPermitted permitted LTE OUP
GeranNfreqGroup
ADD
GERANNFREQGR
OUP
MOD
GERANNFREQGR
OUP
LST
Connect frequency BTS3900, BTS3900 GERANNFREQGR
ConnFreqPriority priority LTE OUP
ADD
GERANNFREQGR
OUPARFCN
LST
GeranNfreqGroupArf
GERANNFREQGR
OUPARFCN
RMV
LocalCellId Local cell ID LTE OUPARFCN
ADD
GERANNFREQGR
OUPARFCN
LST
GeranNfreqGroupArf GERANNFREQGR
OUPARFCN
RMV
BcchGroupId BCCH group ID LTE OUPARFCN
ADD
GERANNFREQGR
GeranNfreqGroupArf OUPARFCN
LST
GERANNFREQGR
OUPARFCN
RMV
GeranArfcn GERAN ARFCN LTE OUPARFCN
ADD
INTRAFREQBLKC
ELL
LST
INTRAFREQBLKC
IntraFreqBlkCell ELL
MOD
INTRAFREQBLKC
ELL
RMV
BTS3900, BTS3900 INTRAFREQBLKC
LocalCellId Local cell ID LTE ELL
ADD
INTRAFREQBLKC
ELL
LST
INTRAFREQBLKC
MOD
INTRAFREQBLKC
ELL
RMV
Start physical cell BTS3900, BTS3900 INTRAFREQBLKC
PhyCellId ID LTE ELL
ADD
INTRAFREQBLKC
ELL
MOD
IntraFreqBlkCell INTRAFREQBLKC
ELL
LST
BTS3900, BTS3900 INTRAFREQBLKC
CellName Cell name LTE ELL
ADD
INTRAFREQBLKC
MOD
INTRAFREQBLKC
ELL
LST
Physical cell ID BTS3900, BTS3900 INTRAFREQBLKC
PhyCellIdRange range LTE ELL
ADD
EUTRANINTRAFR
EQNCELL
LST
EUTRANINTRAFR
EutranIntraFreqNCel EQNCELL
MOD
EUTRANINTRAFR
EQNCELL
RMV
BTS3900, BTS3900 EUTRANINTRAFR
LocalCellId Local cell ID LTE EQNCELL
ADD
EUTRANINTRAFR
EQNCELL
EutranIntraFreqNCel LST
EUTRANINTRAFR
EQNCELL
MOD
EUTRANINTRAFR
EQNCELL
RMV
Mobile country BTS3900, BTS3900 EUTRANINTRAFR
Mcc code LTE EQNCELL
ADD
EUTRANINTRAFR
EQNCELL
EUTRANINTRAFR
EQNCELL
MOD
EUTRANINTRAFR
EQNCELL
RMV
Mobile network BTS3900, BTS3900 EUTRANINTRAFR
Mnc code LTE EQNCELL
EutranIntraFreqNCel ADD
EUTRANINTRAFR
EQNCELL
LST
EUTRANINTRAFR
EQNCELL
MOD
EUTRANINTRAFR
EQNCELL
RMV
eNodeBId eNodeB ID LTE EQNCELL
EutranIntraFreqNCel
ADD
EUTRANINTRAFR
EQNCELL
LST
EUTRANINTRAFR
EQNCELL
MOD
EUTRANINTRAFR
EQNCELL
RMV
CellId Cell ID LTE EQNCELL
EutranIntraFreqNCel
ADD
EUTRANINTRAFR
EQNCELL
MOD
EUTRANINTRAFR
EQNCELL
LST
CellIndividualOffset Cell individual offset LTE EQNCELL
EutranIntraFreqNCel
ADD
EUTRANINTRAFR
EQNCELL
MOD
EUTRANINTRAFR
EQNCELL
LST
CellQoffset Cell offset LTE EQNCELL
ADD
EUTRANINTRAFR
EQNCELL
MOD
EutranIntraFreqNCel EUTRANINTRAFR
EQNCELL
LST
No handover BTS3900, BTS3900 EUTRANINTRAFR
NoHoFlag indicator LTE EQNCELL
ADD
EUTRANINTRAFR
EQNCELL
MOD
EutranIntraFreqNCel EUTRANINTRAFR
EQNCELL
LST
NoRmvFlag No remove indicator LTE EQNCELL
AnrFlag ANR flag LTE EQNCELL
EutranIntraFreqNCel
ADD
EUTRANINTRAFR
EQNCELL
MOD
EUTRANINTRAFR
EQNCELL
LST
LocalCellName Local cell name LTE EQNCELL
EutranIntraFreqNCel
ADD
EUTRANINTRAFR
EQNCELL
MOD
EUTRANINTRAFR
EQNCELL
LST
NeighbourCellNam Neighbour cell BTS3900, BTS3900 EUTRANINTRAFR
e name LTE EQNCELL
EutranIntraFreqNCel
ADD
EUTRANINTRAFR
EQNCELL
MOD
EUTRANINTRAFR
EQNCELL
LST
Cell Measure BTS3900, BTS3900 EUTRANINTRAFR
CellMeasPriority Priority LTE EQNCELL
EutranIntraFreqNCel
ADD
EUTRANINTRAFR
EQNCELL
MOD
EUTRANINTRAFR
EQNCELL
LST
CellRangeExpansio Cell Range BTS3900, BTS3900 EUTRANINTRAFR
n Expansion LTE EQNCELL
EutranIntraFreqNCel
ADD
EUTRANINTRAFR
EQNCELL
MOD
EUTRANINTRAFR
EQNCELL
LST
CtrlMode Control Mode LTE EQNCELL
ADD
EUTRANINTERNF
REQ
LST
EUTRANINTERNF
EutranInterNFreq REQ
MOD
EUTRANINTERNF
REQ
RMV
BTS3900, BTS3900 EUTRANINTERNF
LocalCellId Local cell ID LTE REQ
ADD
EUTRANINTERNF
REQ
LST
EutranInterNFreq EUTRANINTERNF
REQ
MOD
EUTRANINTERNF
REQ
RMV
DlEarfcn Downlink EARFCN LTE REQ
ADD
REQ
MOD
EUTRANINTERNF
REQ
LST
Uplink EARFCN BTS3900, BTS3900 EUTRANINTERNF
UlEarfcnCfgInd configure indicator LTE REQ
EutranInterNFreq
ADD
EUTRANINTERNF
REQ
MOD
EUTRANINTERNF
REQ
LST
UlEarfcn Uplink EARFCN LTE REQ
ADD
EUTRANINTERNF
MOD
EUTRANINTERNF
REQ
Inter frequency cell LST
CellReselPriorityCfg resel priority BTS3900, BTS3900 EUTRANINTERNF
Ind configure indicator LTE REQ
EutranInterNFreq
ADD
EUTRANINTERNF
REQ
MOD
EUTRANINTERNF
REQ
LST
Inter frequency cell BTS3900, BTS3900 EUTRANINTERNF
CellReselPriority resel priority LTE REQ
EutranInterNFreq
ADD
EUTRANINTERNF
REQ
MOD
EUTRANINTERNF
REQ
LST
EUTRAN BTS3900, BTS3900 EUTRANINTERNF
EutranReselTime reselection time LTE REQ
ADD
EUTRANINTERNF
MOD
EUTRANINTERNF
Speed dependent REQ
resel parameter LST
SpeedDependSPCf configuring BTS3900, BTS3900 EUTRANINTERNF
gInd indicator LTE REQ
EutranInterNFreq
ADD
EUTRANINTERNF
REQ
MOD
EUTRANINTERNF
Scaling factor of REQ
treseleutran in LST
TReselEutranSfMe medium mobility BTS3900, BTS3900 EUTRANINTERNF
dium state LTE REQ
EutranInterNFreq
ADD
EUTRANINTERNF
REQ
MOD
EUTRANINTERNF
REQ
TReselEutranSfHig treseleutra in high BTS3900, BTS3900 EUTRANINTERNF
h mobility state LTE REQ
EutranInterNFreq
ADD
EUTRANINTERNF
REQ
MOD
EUTRANINTERNF
REQ
LST
Measurement BTS3900, BTS3900 EUTRANINTERNF
MeasBandWidth bandwidth LTE REQ
EutranInterNFreq
ADD
EUTRANINTERNF
REQ
MOD
EUTRANINTERNF
REQ
LST
QoffsetFreq Frequency offset LTE REQ
EutranInterNFreq
ADD
EUTRANINTERNF
REQ
MOD
EUTRANINTERNF
REQ
LST
Inter frequency high BTS3900, BTS3900 EUTRANINTERNF
ThreshXhigh priority threshold LTE REQ
EutranInterNFreq
ADD
EUTRANINTERNF
REQ
MOD
EUTRANINTERNF
REQ
Inter frequency LST
lower priority BTS3900, BTS3900 EUTRANINTERNF
ThreshXlow threshold LTE REQ
EutranInterNFreq
ADD
EUTRANINTERNF
REQ
MOD
EUTRANINTERNF
REQ
LST
Minimum required BTS3900, BTS3900 EUTRANINTERNF
QRxLevMin RX level LTE REQ
ADD
REQ
MOD
EUTRANINTERNF
REQ
LST
PMAX configure BTS3900, BTS3900 EUTRANINTERNF
PmaxCfgInd indicator LTE REQ
EutranInterNFreq
ADD
EUTRANINTERNF
REQ
MOD
EUTRANINTERNF
REQ
LST
Pmax PMAX LTE REQ
EutranInterNFreq
ADD
EUTRANINTERNF
REQ
MOD
EUTRANINTERNF
REQ
LST
NeighCellConfig Neighbor cell config LTE REQ
EutranInterNFreq
ADD
EUTRANINTERNF
REQ
MOD
EUTRANINTERNF
REQ
LST
PresenceAntennaP Presence antenna BTS3900, BTS3900 EUTRANINTERNF
ort1 port1 LTE REQ
EutranInterNFreq
ADD
EUTRANINTERNF
REQ
MOD
EUTRANINTERNF
REQ
LST
InterFreqHoEventTy Inter-Freq HO BTS3900, BTS3900 EUTRANINTERNF
pe trigger Event Type LTE REQ
EutranInterNFreq
ADD
EUTRANINTERNF
REQ
MOD
EUTRANINTERNF
REQ
Inter frequency high LST
priority RSRQ BTS3900, BTS3900 EUTRANINTERNF
ThreshXhighQ threshold LTE REQ
EutranInterNFreq
ADD
EUTRANINTERNF
REQ
MOD
EUTRANINTERNF
REQ
Inter frequency low LST
priority RSRQ BTS3900, BTS3900 EUTRANINTERNF
ThreshXlowQ threshold LTE REQ
ADD
EUTRANINTERNF
REQ
MOD
REQ
Minimum RX signal LST
quality configuration BTS3900, BTS3900 EUTRANINTERNF
QqualMinCfgInd indicator LTE REQ
EutranInterNFreq
ADD
EUTRANINTERNF
REQ
MOD
EUTRANINTERNF
REQ
LST
Minimum RX signal BTS3900, BTS3900 EUTRANINTERNF
QqualMin quality LTE REQ
EutranInterNFreq
ADD
EUTRANINTERNF
REQ
MOD
EUTRANINTERNF
REQ
LST
Connect frequency BTS3900, BTS3900 EUTRANINTERNF
ConnFreqPriority priority LTE REQ
EutranInterNFreq
ADD
EUTRANINTERNF
REQ
MOD
EUTRANINTERNF
REQ
Mobility Load LST
Balancing Target BTS3900, BTS3900 EUTRANINTERNF
MlbTargetInd Indicator LTE REQ
EutranInterNFreq
ADD
EUTRANINTERNF
REQ
MOD
EUTRANINTERNF
REQ
Frequency Offset LST
for Connected BTS3900, BTS3900 EUTRANINTERNF
QoffsetFreqConn Mode LTE REQ
EutranInterNFreq
ADD
EUTRANINTERNF
REQ
MOD
EUTRANINTERNF
REQ
LST
CtrlMode Control Mode LTE REQ
ADD
INTERFREQBLKC
ELL
LST
INTERFREQBLKC
InterFreqBlkCell ELL
MOD
INTERFREQBLKC
ELL
RMV
BTS3900, BTS3900 INTERFREQBLKC
LocalCellId Local cell ID LTE ELL
ADD
INTERFREQBLKC
ELL
LST
INTERFREQBLKC
MOD
INTERFREQBLKC
ELL
RMV
DlEarfcn Downlink EARFCN LTE ELL
ADD
INTERFREQBLKC
ELL
LST
INTERFREQBLKC
MOD
INTERFREQBLKC
ELL
RMV
Start physical cell BTS3900, BTS3900 INTERFREQBLKC
PhyCellId ID LTE ELL
ADD
INTERFREQBLKC
ELL
MOD
InterFreqBlkCell INTERFREQBLKC
ELL
LST
CellName Cell name LTE ELL
ADD
INTERFREQBLKC
MOD
INTERFREQBLKC
ELL
LST
Physical cell ID BTS3900, BTS3900 INTERFREQBLKC
PhyCellIdRange range LTE ELL
ADD
EUTRANINTERFR
EQNCELL
LST
EUTRANINTERFR
EutranInterFreqNCel EQNCELL
MOD
EUTRANINTERFR
EQNCELL
RMV
BTS3900, BTS3900 EUTRANINTERFR
LocalCellId Local cell ID LTE EQNCELL
ADD
EUTRANINTERFR
EQNCELL
EutranInterFreqNCel LST
EUTRANINTERFR
EQNCELL
MOD
EUTRANINTERFR
EQNCELL
RMV
Mobile country BTS3900, BTS3900 EUTRANINTERFR
Mcc code LTE EQNCELL
ADD
EUTRANINTERFR
EQNCELL
EUTRANINTERFR
EQNCELL
MOD
EUTRANINTERFR
EQNCELL
RMV
Mobile network BTS3900, BTS3900 EUTRANINTERFR
Mnc code LTE EQNCELL
EutranInterFreqNCel ADD
EUTRANINTERFR
EQNCELL
LST
EUTRANINTERFR
EQNCELL
MOD
EUTRANINTERFR
EQNCELL
RMV
eNodeBId eNodeB ID LTE EQNCELL
EutranInterFreqNCel
ADD
EUTRANINTERFR
EQNCELL
LST
EUTRANINTERFR
EQNCELL
MOD
EUTRANINTERFR
EQNCELL
RMV
CellId Cell ID LTE EQNCELL
EutranInterFreqNCel
ADD
EUTRANINTERFR
EQNCELL
MOD
EUTRANINTERFR
EQNCELL
LST
CellIndividualOffset Cell individual offset LTE EQNCELL
EutranInterFreqNCel
ADD
EUTRANINTERFR
EQNCELL
MOD
EUTRANINTERFR
EQNCELL
LST
CellQoffset Cell offset LTE EQNCELL
ADD
EUTRANINTERFR
EutranInterFreqNCel EQNCELL
MOD
EUTRANINTERFR
EQNCELL
LST
No handover BTS3900, BTS3900 EUTRANINTERFR
NoHoFlag indicator LTE EQNCELL
ADD
EUTRANINTERFR
EQNCELL
MOD
EutranInterFreqNCel EUTRANINTERFR
EQNCELL
LST
NoRmvFlag No remove indicator LTE EQNCELL
EutranInterFreqNCel
ADD
EUTRANINTERFR
EQNCELL
MOD
EUTRANINTERFR
EQNCELL
LST
Blind handover BTS3900, BTS3900 EUTRANINTERFR
BlindHoPriority Priority LTE EQNCELL
AnrFlag ANR flag LTE EQNCELL
EutranInterFreqNCel
ADD
EUTRANINTERFR
EQNCELL
MOD
EUTRANINTERFR
EQNCELL
LST
LocalCellName Local cell name LTE EQNCELL
EutranInterFreqNCel
ADD
EUTRANINTERFR
EQNCELL
MOD
EUTRANINTERFR
EQNCELL
LST
NeighbourCellNam Neighbour cell BTS3900, BTS3900 EUTRANINTERFR
e name LTE EQNCELL
EutranInterFreqNCel
ADD
EUTRANINTERFR
EQNCELL
MOD
EUTRANINTERFR
EQNCELL
LST
Cell Measure BTS3900, BTS3900 EUTRANINTERFR
CellMeasPriority Priority LTE EQNCELL
EutranInterFreqNCel
ADD
EUTRANINTERFR
EQNCELL
MOD
EUTRANINTERFR
EQNCELL
LST
CtrlMode Control Mode LTE EQNCELL
ADD
EUTRANEXTERNA
LCELL
ADD
EUTRANEXTERNA
LCELLBAND
LST
EUTRANEXTERNA
LCELL
EutranExternalCell LST
EUTRANEXTERNA
LCELLBAND
MOD
EUTRANEXTERNA
LCELL
RMV
EUTRANEXTERNA
LCELL
RMV
Mobile country BTS3900, BTS3900 EUTRANEXTERNA
Mcc code LTE LCELLBAND
ADD
EUTRANEXTERNA
LCELL
ADD
EUTRANEXTERNA
LCELLBAND
LST
EUTRANEXTERNA
LCELL
EUTRANEXTERNA
LCELLBAND
MOD
EUTRANEXTERNA
LCELL
RMV
EUTRANEXTERNA
LCELL
RMV
Mobile network BTS3900, BTS3900 EUTRANEXTERNA
Mnc code LTE LCELLBAND
ADD
EUTRANEXTERNA
LCELL
ADD
EUTRANEXTERNA
LCELLBAND
LST
EUTRANEXTERNA
LCELL
EUTRANEXTERNA
LCELLBAND
MOD
EUTRANEXTERNA
LCELL
RMV
EUTRANEXTERNA
LCELL
RMV
eNodeBId eNodeB ID LTE LCELLBAND
ADD
EUTRANEXTERNA
LCELL
ADD
EUTRANEXTERNA
LCELLBAND
LST
EUTRANEXTERNA
EutranExternalCell LCELL
LST
EUTRANEXTERNA
LCELLBAND
MOD
EUTRANEXTERNA
LCELL
RMV
EUTRANEXTERNA
LCELL
RMV
CellId Cell ID LTE LCELLBAND
EutranExternalCell
ADD
EUTRANEXTERNA
LCELL
MOD
EUTRANEXTERNA
LCELL
LST
DlEarfcn Downlink EARFCN LTE LCELL
ADD
EUTRANEXTERNA
EutranExternalCell LCELL
MOD
EUTRANEXTERNA
LCELL
LST
Uplink EARFCN BTS3900, BTS3900 EUTRANEXTERNA
UlEarfcnCfgInd indicator LTE LCELL
EutranExternalCell ADD
EUTRANEXTERNA
LCELL
MOD
EUTRANEXTERNA
LCELL
LST
UlEarfcn Uplink EARFCN LTE LCELL
ADD
EUTRANEXTERNA
LCELL
MOD
EutranExternalCell
EUTRANEXTERNA
LCELL
LST
PhyCellId Physical cell ID LTE LCELL
EutranExternalCell
ADD
EUTRANEXTERNA
LCELL
MOD
EUTRANEXTERNA
LCELL
LST
Tac Tracking area code LTE LCELL
EutranExternalCell
ADD
EUTRANEXTERNA
LCELL
MOD
EUTRANEXTERNA
LCELL
LST
CellName Cell name LTE LCELL
EutranExternalCell
EutranExternalCell External E-UTRAN BTS3900, BTS3900

SlaveBand Cell Slave Band LTE None
ADD
EUTRANEXTERNA
LCELLBAND
LST
EutranExternalCell EUTRANEXTERNA
LCELLBAND
RMV
MultiBand.FreqBan BTS3900, BTS3900 EUTRANEXTERNA
d Frequency band LTE LCELLBAND
EutranExternalCell
ADD
EUTRANEXTERNA
LCELL
MOD
EUTRANEXTERNA
LCELL
LST
CtrlMode Control Mode LTE LCELL
ADD
CDMA2000BCSCE
LLOP
LST
CDMA2000BCSCE
Cdma2000BcSCellO LLOP
MOD
CDMA2000BCSCE
LLOP
RMV
BTS3900, BTS3900 CDMA2000BCSCE
LocalCellId Local cell ID LTE LLOP
ADD
CDMA2000BCSCE
LLOP
LST
CDMA2000BCSCE
MOD
CDMA2000BCSCE
LLOP
RMV
BandClass Band class LTE LLOP
ADD
CDMA2000BCSCE
LLOP
LST
CDMA2000BCSCE
MOD
CDMA2000BCSCE
LLOP
RMV
CnOperatorID Cn operator ID LTE LLOP
ADD
CDMA2000BCSCE
LLOP
MOD
Cdma2000BcSCellO CDMA2000BCSCE
LLOP
CDMA2000 1xRTT LST
Cdma1XrttCellRese dedicated priority BTS3900, BTS3900 CDMA2000BCSCE
lPriInd configure indicator LTE LLOP
Cdma2000BcSCellO
ADD
CDMA2000BCSCE
LLOP
MOD
CDMA2000BCSCE
LLOP
CDMA2000 1xRTT LST
Cdma1XrttCellRese Cell Reselection BTS3900, BTS3900 CDMA2000BCSCE
lDediPri Dedicated Priority LTE LLOP
ADD
CDMA2000BCSCE
LLOP
MOD
Cdma2000BcSCellO CDMA2000BCSCE
LLOP
CDMA2000 HRPD LST
HrpdCellReselDedi dedicated priority BTS3900, BTS3900 CDMA2000BCSCE
PriCfgInd configure indicator LTE LLOP
Cdma2000BcSCellO
ADD
CDMA2000BCSCE
LLOP
MOD
CDMA2000BCSCE
LLOP
CDMA2000 HRPD LST
HrpdCellReselDedi Cell Reselection BTS3900, BTS3900 CDMA2000BCSCE
Pri Dedicated Priority LTE LLOP
ADD
EUTRANNFREQR
ANSHARE
LST
EUTRANNFREQR
EutranNFreqRanSha ANSHARE
MOD
EUTRANNFREQR
ANSHARE
RMV
BTS3900, BTS3900 EUTRANNFREQR
LocalCellId Local cell ID LTE ANSHARE
ADD
EUTRANNFREQR
ANSHARE
LST
EUTRANNFREQR
EutranNFreqRanSha ANSHARE
MOD
EUTRANNFREQR
ANSHARE
RMV
BTS3900, BTS3900 EUTRANNFREQR
DlEarfcn Downlink EARFCN LTE ANSHARE
EutranNFreqRanSha ADD
EUTRANNFREQR
ANSHARE
LST
EUTRANNFREQR
ANSHARE
MOD
EUTRANNFREQR
ANSHARE
RMV
Mobile country BTS3900, BTS3900 EUTRANNFREQR
Mcc code LTE ANSHARE
EutranNFreqRanSha ADD
EUTRANNFREQR
ANSHARE
LST
EUTRANNFREQR
ANSHARE
MOD
EUTRANNFREQR
ANSHARE
RMV
Mobile network BTS3900, BTS3900 EUTRANNFREQR
Mnc code LTE ANSHARE
ADD
EUTRANNFREQR
ANSHARE
MOD
EutranNFreqRanSha EUTRANNFREQR
ANSHARE
CellReselPriorityCfg priority configure BTS3900, BTS3900 EUTRANNFREQR
Ind indicator LTE ANSHARE
EutranNFreqRanSha
ADD
EUTRANNFREQR
ANSHARE
MOD
EUTRANNFREQR
ANSHARE
LST
Cell reselection BTS3900, BTS3900 EUTRANNFREQR
CellReselPriority priority LTE ANSHARE
ADD
EUTRANNFREQS
CELLOP
LST
EUTRANNFREQS
EutranNFreqSCellOp CELLOP
MOD
EUTRANNFREQS
CELLOP
RMV
BTS3900, BTS3900 EUTRANNFREQS
LocalCellId Local cell ID LTE CELLOP
ADD
EUTRANNFREQS
CELLOP
LST
EUTRANNFREQS
MOD
EUTRANNFREQS
CELLOP
RMV
DlEarfcn Downlink EARFCN LTE CELLOP
ADD
EUTRANNFREQS
CELLOP
LST
EUTRANNFREQS
MOD
EUTRANNFREQS
CELLOP
RMV
CnOperatorID Cn operator ID LTE CELLOP
ADD
EUTRANNFREQS
CELLOP
MOD
EutranNFreqSCellOp EUTRANNFREQS
CELLOP
CellReselDediPriCf dedicated priority BTS3900, BTS3900 EUTRANNFREQS
gInd configure indicator LTE CELLOP
EutranNFreqSCellOp
ADD
EUTRANNFREQS
CELLOP
MOD
EUTRANNFREQS
CELLOP
LST
Cell reselection BTS3900, BTS3900 EUTRANNFREQS
CellReselDediPri dedicated priority LTE CELLOP
ADD
GERANNFGROUP
SCELLOP
LST
GERANNFGROUP
GeranNFGroupSCell SCELLOP
MOD
GERANNFGROUP
SCELLOP
RMV
BTS3900, BTS3900 GERANNFGROUP
LocalCellId Local cell ID LTE SCELLOP
ADD
GERANNFGROUP
SCELLOP
LST
GERANNFGROUP
MOD
GERANNFGROUP
SCELLOP
RMV
BcchGroupId BCCH group ID LTE SCELLOP
ADD
GERANNFGROUP
SCELLOP
LST
GERANNFGROUP
MOD
GERANNFGROUP
SCELLOP
RMV
CnOperatorID Cn operator ID LTE SCELLOP
ADD
GERANNFGROUP
SCELLOP
MOD
GeranNFGroupSCell GERANNFGROUP
SCELLOP
CellReselDediPriCf dedicated priority BTS3900, BTS3900 GERANNFGROUP
gInd configure indicator LTE SCELLOP
GeranNFGroupSCell
ADD
GERANNFGROUP
SCELLOP
MOD
GERANNFGROUP
SCELLOP
LST
Cell reselection BTS3900, BTS3900 GERANNFGROUP
CellReselDediPri dedicated priority LTE SCELLOP
ADD
GERANRANSHAR
E
LST
GERANRANSHAR
GeranRanShare E
MOD
GERANRANSHAR
E
RMV
BTS3900, BTS3900 GERANRANSHAR
LocalCellId Local cell ID LTE E
ADD
GERANRANSHAR
E
LST
GERANRANSHAR
GeranRanShare E
MOD
GERANRANSHAR
E
RMV
BTS3900, BTS3900 GERANRANSHAR
BcchGroupId BCCH group ID LTE E
GeranRanShare
ADD
GERANRANSHAR
E
LST
GERANRANSHAR
E
MOD
GERANRANSHAR
E
RMV
Mobile country BTS3900, BTS3900 GERANRANSHAR
Mcc code LTE E
GeranRanShare ADD
GERANRANSHAR
E
LST
GERANRANSHAR
E
MOD
GERANRANSHAR
E
RMV
Mobile network BTS3900, BTS3900 GERANRANSHAR
Mnc code LTE E
ADD
GERANRANSHAR
E
MOD
GeranRanShare GERANRANSHAR
E
CellReselPriorityCfg priority configure BTS3900, BTS3900 GERANRANSHAR
Ind indicator LTE E
GeranRanShare
ADD
GERANRANSHAR
E
MOD
GERANRANSHAR
E
LST
Cell reselection BTS3900, BTS3900 GERANRANSHAR
CellReselPriority priority LTE E
ADD
UTRANNCELL
DSP
UTRANRIMINFO
DSP
UTRANRIMLOADI
UtranNCell NFO
LST UTRANNCELL
MOD
UTRANNCELL
LocalCellId Local cell ID LTE UTRANNCELL
ADD
UTRANNCELL
LST UTRANNCELL
UtranNCell MOD
UTRANNCELL
RMV
UTRANNCELL
DSP
UTRANRIMINFO
DSP
Mobile country BTS3900, BTS3900 UTRANRIMLOADI
Mcc code LTE NFO
ADD
UTRANNCELL
LST UTRANNCELL
UtranNCell MOD
UTRANNCELL
RMV
UTRANNCELL
DSP
UTRANRIMINFO
DSP
Mobile network BTS3900, BTS3900 UTRANRIMLOADI
Mnc code LTE NFO
UtranNCell ADD
UTRANNCELL
LST UTRANNCELL
MOD
UTRANNCELL
RMV
UTRANNCELL
DSP
UTRANRIMINFO
DSP
BTS3900, BTS3900 UTRANRIMLOADI
RncId RNC ID LTE NFO
UtranNCell
ADD
UTRANNCELL
LST UTRANNCELL
MOD
UTRANNCELL
RMV
UTRANNCELL
DSP
UTRANRIMINFO
DSP
CellId RNC cell ID LTE NFO
ADD
UtranNCell UTRANNCELL
MOD
No handover BTS3900, BTS3900 UTRANNCELL
NoHoFlag indicator LTE LST UTRANNCELL
ADD
UtranNCell UTRANNCELL
MOD
BTS3900, BTS3900 UTRANNCELL
NoRmvFlag No remove indicator LTE LST UTRANNCELL
UtranNCell
BTS3900, BTS3900
AnrFlag ANR flag LTE LST UTRANNCELL
UtranNCell
ADD
UTRANNCELL
MOD
Blind handover BTS3900, BTS3900 UTRANNCELL
BlindHoPriority priority LTE LST UTRANNCELL
UtranNCell
ADD
UTRANNCELL
MOD
Cell Measure BTS3900, BTS3900 UTRANNCELL
CellMeasPriority Priority LTE LST UTRANNCELL
UtranNCell
ADD
UTRANNCELL
MOD
LocalCellName Local cell name LTE LST UTRANNCELL
UtranNCell
ADD
UTRANNCELL
MOD
NeighbourCellNam Neighbour cell BTS3900, BTS3900 UTRANNCELL
e name LTE LST UTRANNCELL
UtranNCell
ADD
UTRANNCELL
MOD
CtrlMode Control Mode LTE LST UTRANNCELL
DSP
UTRANRIMINFO
UtranNCell DSP
eNodeBId eNodeB ID LTE NFO
UtranNCell
URimBeginningTim BTS3900, BTS3900 DSP
e Rim latest start time LTE UTRANRIMINFO
UtranNCell
ULastRimUpdating RIM latest update BTS3900, BTS3900 DSP

Time time LTE UTRANRIMINFO
UtranNCell
DSP
ULastRimLoadUpd cell load RIM latest BTS3900, BTS3900 UTRANRIMLOADI
atingTime update time LTE NFO
UtranNCell
DSP
URimLoadStartTim Cell load Rim latest BTS3900, BTS3900 UTRANRIMLOADI
e start time LTE NFO
UtranNCell
DSP
UMTS cell load BTS3900, BTS3900 UTRANRIMLOADI
URimLoadStatus status LTE NFO
ADD
UTRANNFREQSC
ELLOP
LST
UTRANNFREQSC
UtranNFreqSCellOp ELLOP
MOD
UTRANNFREQSC
ELLOP
RMV
BTS3900, BTS3900 UTRANNFREQSC
LocalCellId Local cell ID LTE ELLOP
ADD
UTRANNFREQSC
ELLOP
LST
UTRANNFREQSC
MOD
UTRANNFREQSC
ELLOP
RMV
UtranDlArfcn Downlink UARFCN LTE ELLOP
ADD
UTRANNFREQSC
ELLOP
LST
UTRANNFREQSC
MOD
UTRANNFREQSC
ELLOP
RMV
CnOperatorID Cn operator ID LTE ELLOP
ADD
UTRANNFREQSC
ELLOP
MOD
UtranNFreqSCellOp
UTRANNFREQSC
ELLOP
CellReselDediPriCf dedicated priority BTS3900, BTS3900 UTRANNFREQSC
gInd configure indicator LTE ELLOP
UtranNFreqSCellOp
ADD
UTRANNFREQSC
ELLOP
MOD
UTRANNFREQSC
ELLOP
LST
Cell reselection BTS3900, BTS3900 UTRANNFREQSC
CellReselDediPri dedicated priority LTE ELLOP
LST
UTRANRANSHAR
E
MOD
UtranRanShare UTRANRANSHAR
E
RMV
BTS3900, BTS3900 UTRANRANSHAR
LocalCellId Local cell ID LTE E
UtranRanShare
ADD
UTRANRANSHAR
E
LST
UTRANRANSHAR
E
MOD
UTRANRANSHAR
E
RMV
BTS3900, BTS3900 UTRANRANSHAR
UtranDlArfcn Downlink UARFCN LTE E
ADD
E
LST
UTRANRANSHAR
E
MOD
UTRANRANSHAR
E
RMV
Mobile country BTS3900, BTS3900 UTRANRANSHAR
Mcc code LTE E
ADD
E
LST
UTRANRANSHAR
E
MOD
UTRANRANSHAR
E
RMV
Mobile network BTS3900, BTS3900 UTRANRANSHAR
Mnc code LTE E
UTRANRANSHAR
E
MOD
UTRANRANSHAR
UtranRanShare E
CellReselPriorityCfg priority configure BTS3900, BTS3900 UTRANRANSHAR
Ind indicator LTE E
UtranRanShare
ADD
UTRANRANSHAR
E
MOD
UTRANRANSHAR
E
LST
Cell reselection BTS3900, BTS3900 UTRANRANSHAR
CellReselPriority priority LTE E
ADD
UTRANNFREQ
LST
UTRANNFREQ
UtranNFreq MOD
UTRANNFREQ
LocalCellId Local cell ID LTE UTRANNFREQ
UtranNFreq
ADD
UTRANNFREQ
LST
UTRANNFREQ
MOD
UTRANNFREQ
UtranDlArfcn Downlink UARFCN LTE UTRANNFREQ
ADD
UTRANNFREQ
MOD
UtranNFreq UTRANNFREQ
UtranVersion UTRAN version LTE UTRANNFREQ
ADD
UTRANNFREQ
MOD
UtranNFreq UTRANNFREQ
UTRAN cell type BTS3900, BTS3900 LST
UtranFddTddType indicator LTE UTRANNFREQ
UtranNFreq
ADD
UTRANNFREQ
MOD
UTRANNFREQ
Uplink UARFCN BTS3900, BTS3900 LST
UtranUlArfcnCfgInd indicator LTE UTRANNFREQ
UtranNFreq
ADD
UTRANNFREQ
MOD
UTRANNFREQ
UtranUlArfcn Uplink UARFCN LTE UTRANNFREQ
ADD
UTRANNFREQ
UtranNFreq MOD
UTRANNFREQ
CellReselPriorityCfg Reselection priority BTS3900, BTS3900 LST
Ind configure indicator LTE UTRANNFREQ
UtranNFreq
ADD
UTRANNFREQ
MOD
UTRANNFREQ
Cell reselection BTS3900, BTS3900 LST
CellReselPriority priority LTE UTRANNFREQ
UtranNFreq
ADD
UTRANNFREQ
MOD
UTRANNFREQ
PmaxUtran PMAX LTE UTRANNFREQ
UtranNFreq
ADD
UTRANNFREQ
MOD
UTRANNFREQ
OffsetFreq Frequency offset LTE UTRANNFREQ
UtranNFreq
ADD
UTRANNFREQ
MOD
UTRANNFREQ
Minimum required BTS3900, BTS3900 LST
Qqualmin quality level LTE UTRANNFREQ
UtranNFreq
ADD
UTRANNFREQ
MOD
UTRANNFREQ
Minimum required BTS3900, BTS3900 LST
QRxLevMin RX level LTE UTRANNFREQ
UtranNFreq
ADD
UTRANNFREQ
MOD
UTRANNFREQ
UTRAN high priority BTS3900, BTS3900 LST
ThreshXHigh threshold LTE UTRANNFREQ
UtranNFreq
ADD
UTRANNFREQ
MOD
UTRANNFREQ
UTRAN lower BTS3900, BTS3900 LST
ThreshXLow priority threshold LTE UTRANNFREQ
UtranNFreq
ADD
UTRANNFREQ
MOD
UTRANNFREQ
UTRAN high priority BTS3900, BTS3900 LST
ThreshXHighQ RSRQ threshold LTE UTRANNFREQ
UtranNFreq
ADD
UTRANNFREQ
MOD
UTRANNFREQ
UTRAN low priority BTS3900, BTS3900 LST
ThreshXLowQ RSRQ threshold LTE UTRANNFREQ
UtranNFreq
ADD
UTRANNFREQ
MOD
UTRANNFREQ
PsPriority PS service priority LTE UTRANNFREQ
UtranNFreq
ADD
UTRANNFREQ
MOD
UTRANNFREQ
CsPriority CS service priority LTE UTRANNFREQ
UtranNFreq
ADD
UTRANNFREQ
MOD
UTRANNFREQ
Connect frequency BTS3900, BTS3900 LST
ConnFreqPriority priority LTE UTRANNFREQ
UtranNFreq
ADD
UTRANNFREQ
MOD
UTRANNFREQ
CS and PS mixed BTS3900, BTS3900 LST
CsPsMixedPriority priority LTE UTRANNFREQ
ADD
UTRANEXTERNAL
CELL
ADD
UTRANEXTERNAL
CELLBAND
LST
UTRANEXTERNAL
CELL
UtranExternalCell LST
UTRANEXTERNAL
CELLBAND
MOD
UTRANEXTERNAL
CELL
RMV
UTRANEXTERNAL
CELL
RMV
Mobile country BTS3900, BTS3900 UTRANEXTERNAL
Mcc code LTE CELLBAND
ADD
UTRANEXTERNAL
CELL
ADD
UTRANEXTERNAL
CELLBAND
LST
UTRANEXTERNAL
CELL
UTRANEXTERNAL
CELLBAND
MOD
UTRANEXTERNAL
CELL
RMV
UTRANEXTERNAL
CELL
RMV
Mobile network BTS3900, BTS3900 UTRANEXTERNAL
Mnc code LTE CELLBAND
ADD
UTRANEXTERNAL
CELL
ADD
UTRANEXTERNAL
CELLBAND
LST
UTRANEXTERNAL
CELL
UTRANEXTERNAL
CELLBAND
MOD
UTRANEXTERNAL
CELL
RMV
UTRANEXTERNAL
CELL
RMV
RncId RNC ID LTE CELLBAND
ADD
UTRANEXTERNAL
CELL
ADD
UTRANEXTERNAL
CELLBAND
LST
UTRANEXTERNAL
UtranExternalCell CELL
LST
UTRANEXTERNAL
CELLBAND
MOD
UTRANEXTERNAL
CELL
RMV
UTRANEXTERNAL
CELL
RMV
CellId RNC cell ID LTE CELLBAND
UtranExternalCell
ADD
UTRANEXTERNAL
CELL
MOD
UTRANEXTERNAL
CELL
LST
UtranDlArfcn Downlink UARFCN LTE CELL
UtranExternalCell
ADD
UTRANEXTERNAL
CELL
MOD
UTRANEXTERNAL
CELL
LST
Uplink UARFCN BTS3900, BTS3900 UTRANEXTERNAL
UtranUlArfcnCfgInd configure indicator LTE CELL
UtranExternalCell
ADD
UTRANEXTERNAL
CELL
MOD
UTRANEXTERNAL
CELL
LST
UtranUlArfcn Uplink UARFCN LTE CELL
UtranExternalCell
ADD
UTRANEXTERNAL
CELL
MOD
UTRANEXTERNAL
CELL
LST
UTRAN cell type BTS3900, BTS3900 UTRANEXTERNAL
UtranFddTddType indicator LTE CELL
ADD
UTRANEXTERNAL
UtranExternalCell CELL
MOD
UTRANEXTERNAL
CELL
LST
Routing area code BTS3900, BTS3900 UTRANEXTERNAL
RacCfgInd configure indicator LTE CELL
UtranExternalCell
ADD
UTRANEXTERNAL
CELL
MOD
UTRANEXTERNAL
CELL
LST
Rac Routing area code LTE CELL
ADD
UTRANEXTERNAL
CELL
MOD
UtranExternalCell UTRANEXTERNAL
CELL
LST
Primary scrambling BTS3900, BTS3900 UTRANEXTERNAL
PScrambCode code LTE CELL
ADD
UTRANEXTERNAL
CELL
MOD
CELL
LST
Lac Location area code LTE CELL
UtranExternalCell
ADD
UTRANEXTERNAL
CELL
MOD
UTRANEXTERNAL
CELL
LST
CellName Cell name LTE CELL
ADD
CELL
MOD
UTRANEXTERNAL
CELL
LST
CS and PS BTS3900, BTS3900 UTRANEXTERNAL
CsPsHOInd handover indicator LTE CELL
UtranExternalCell
UtranExternalCellSl External UTRAN BTS3900, BTS3900

aveBand Cell Slave Band LTE None
ADD
UTRANEXTERNAL
CELLBAND
LST
CELLBAND
RMV
MultiBand.FreqBan BTS3900, BTS3900 UTRANEXTERNAL
d Frequency band LTE CELLBAND
UtranExternalCell
ADD
UTRANEXTERNAL
CELL
MOD
UTRANEXTERNAL
CELL
LST
ANR
ANR add cell BTS3900, BTS3900 MOD ANR

AddCellThd threshold LTE LST ANR
ANR
ANR delete cell BTS3900, BTS3900 MOD ANR

DelCellThd threshold LTE LST ANR
ANR
Least Handover BTS3900, BTS3900 MOD ANR

NcellHoStatNum Num for Statistic LTE LST ANR
ANR
BTS3900, BTS3900 MOD ANR

StatisticPeriod Statistic cycle LTE LST ANR
ANR
Fast ANR PCI BTS3900, BTS3900 MOD ANR

FastAnrRprtAmount report amount LTE LST ANR
ANR
Fast ANR PCI BTS3900, BTS3900 MOD ANR

FastAnrRprtInterval report interval LTE LST ANR
ANR
FastAnrCheckPerio Fast ANR checking BTS3900, BTS3900 MOD ANR

d period LTE LST ANR
ANR
Fast ANR
measurement BTS3900, BTS3900 MOD ANR
FastAnrRsrpThd RSRP threshold LTE LST ANR
ANR
IntraRat Fast ANR

FastAnrIntraRatMe measurement UE BTS3900, BTS3900 MOD ANR
asUeNum number LTE LST ANR
ANR
InterRat Fast ANR

FastAnrInterRatMe measurement UE BTS3900, BTS3900 MOD ANR
asUeNum number LTE LST ANR
ANR
IntraRat Fast ANR

FastAnrIntraRatUe valid measurement BTS3900, BTS3900 MOD ANR
NumThd min UE number LTE LST ANR
ANR
InterRat Fast ANR

FastAnrInterRatUe valid measurement BTS3900, BTS3900 MOD ANR
NumThd min UE number LTE LST ANR
ANR

OptMode Optimization Mode LTE LST ANR
ANR
StatisticPeriodForN Statistic Cycle For BTS3900, BTS3900 MOD ANR

RTDel Delete NRT LTE LST ANR
ANR
StatisticNumForNR Statistic Number BTS3900, BTS3900 MOD ANR

TDel For Delete NRT LTE LST ANR
ANR
ANR Active PCI

ActivePciConflictSw Conflict Detection BTS3900, BTS3900 MOD ANR
itch Switch LTE LST ANR
ANR

StartTime Start time LTE LST ANR
ANR

StopTime Stop time LTE LST ANR
ANR
UTRAN Fast ANR BTS3900, BTS3900 MOD ANR

FastAnrRscpThd RSCP threshold LTE LST ANR
ANR
GERAN Fast ANR BTS3900, BTS3900 MOD ANR

FastAnrRssiThd RSSI threshold LTE LST ANR
ANR
CDMA2000 1XRTT
FastAnrCdma1xrttP Fast ANR Pilot BTS3900, BTS3900 MOD ANR
ilotThd threshold LTE LST ANR
ANR
CDMA2000 HRPD
FastAnrCdmahrpdP Fast ANR Pilot BTS3900, BTS3900 MOD ANR
ilotThd threshold LTE LST ANR
ANR

FastAnrMode Fast ANR Mode LTE LST ANR
ADD BFANT
DSP BFANT
BfAnt LST BFANT
MOD BFANT
BTS3900, BTS3900 RMV BFANT
DEVICENO Device No. LTE DSP BFANTDB
BfAnt
ADD BFANT
MOD BFANT
DSP BFANT
BTS3900, BTS3900 DSP BFANTDB
Manufactory Manufactory LTE LST BFANT
ADD BFANT
MOD BFANT
BfAnt DSP BFANT
Connect RRU BTS3900, BTS3900 DSP BFANTDB
CONNCN cabinet No. LTE LST BFANT
ADD BFANT
MOD BFANT
BfAnt DSP BFANT
Connect RRU BTS3900, BTS3900 DSP BFANTDB
CONNSRN subrack No. LTE LST BFANT
ADD BFANT
MOD BFANT
BfAnt DSP BFANT
Connect RRU slot BTS3900, BTS3900 DSP BFANTDB
CONNSN No. LTE LST BFANT
ADD BFANT
MOD BFANT
BfAnt DSP BFANT
Antenna model BTS3900, BTS3900 DSP BFANTDB
MODELNO number LTE LST BFANT
ADD BFANT
MOD BFANT
BfAnt DSP BFANT
TILT Tilt LTE LST BFANT
ADD BFANT
MOD BFANT
BfAnt DSP BFANT
BEAMWIDTH Beamwidth LTE LST BFANT
ADD BFANT
MOD BFANT
BfAnt DSP BFANT
Band Band LTE LST BFANT
BfAnt ADD BFANT

BTS3900, BTS3900 MOD BFANT
TYPE Antenna Type LTE LST BFANT
BfAnt BTS3900, BTS3900 DSP BFANT

POLARMODE Polar Mode LTE DSP BFANTDB
BfAnt Element Beamform BTS3900, BTS3900 DSP BFANT

ELMTBMWTH Width LTE DSP BFANTDB
BfAnt
BTS3900, BTS3900 DSP BFANT
AntPortNum Number of Port LTE DSP BFANTDB
BfAnt
Amplitude Offset of
Crs2PortPhyPort1A Physical Port 1 for BTS3900, BTS3900 DSP BFANT
mp CRS2 LTE DSP BFANTDB
BfAnt
Crs2PortPhyPort1P Phase of Physical BTS3900, BTS3900 DSP BFANT

ha Port 1 for CRS2 LTE DSP BFANTDB
BfAnt
Amplitude Offset of
BfAnt

BfAnt
Amplitude Offset of
BfAnt

BfAnt
Amplitude Offset of
BfAnt

BfAnt
Amplitude Offset of
BfAnt

BfAnt
Amplitude Offset of
BfAnt

BfAnt BTS3900, BTS3900 DSP BFANT

SE Session ID LTE DSP BFANTDB
CaGroup
ADD CAGROUP
LST CAGROUP
BTS3900, BTS3900 MOD CAGROUP
CaGroupId CA Group Identity LTE RMV CAGROUP
CaGroup
ADD CAGROUP
BTS3900, BTS3900 MOD CAGROUP
CaGroupType CA Group Type LTE LST CAGROUP
CaGroupCell
ADD
CAGROUPCELL
LST
CAGROUPCELL
CaGroupId CA Group Identity LTE CAGROUPCELL
ADD
CAGROUPCELL
CaGroupCell LST
CAGROUPCELL
LocalCellId Local Cell ID LTE CAGROUPCELL
CellIdPrdUpt
MOD
CELLIDPRDUPT
Period update BTS3900, BTS3900 LST
PrdUptSwitch switch LTE CELLIDPRDUPT
CellIdPrdUpt
MOD
CELLIDPRDUPT
ActionTime Action time LTE CELLIDPRDUPT
MOD
CellIdPrdUpt CELLIDPRDUPT
Period Period LTE CELLIDPRDUPT
eNBLicenseAlmThd
SET
ENBLICENSEALM
THD
LST
BTS3900, BTS3900 ENBLICENSEALM
OPRD OPRD LTE THD
eNBLicenseAlmThd
SET
ENBLICENSEALM
THD
LST
OTHD OTHD LTE THD
eNBLicenseAlmThd
SET
ENBLICENSEALM
THD
LST
RPRD RPRD LTE THD
eNBLicenseAlmThd
SET
ENBLICENSEALM
THD
LST
RTHD RTHD LTE THD
eNBRsvdPara
MOD
ENBRSVDPARA
Reserved Switch BTS3900, BTS3900 LST
RsvdSwPara0 Parameter 0 LTE ENBRSVDPARA
eNBRsvdPara
MOD
ENBRSVDPARA
eNBRsvdPara
MOD
ENBRSVDPARA
eNBRsvdPara
MOD
ENBRSVDPARA
Reserved BTS3900, BTS3900 LST
RsvdPara2 Parameter 2 LTE ENBRSVDPARA
eNBRsvdPara
MOD
ENBRSVDPARA
eNBRsvdPara
MOD
ENBRSVDPARA
eNBRsvdPara
MOD
ENBRSVDPARA
eNBRsvdPara
MOD
ENBRSVDPARA
eNBRsvdPara
MOD
ENBRSVDPARA
eNBRsvdPara
MOD
ENBRSVDPARA
eNBRsvdPara
MOD
ENBRSVDPARA
eNBRsvdPara
MOD
ENBRSVDPARA
eNBRsvdPara
MOD
ENBRSVDPARA
eNBRsvdPara
MOD
ENBRSVDPARA
eNBRsvdPara
MOD
ENBRSVDPARA
eNBRsvdPara
MOD
ENBRSVDPARA
eNBRsvdPara
MOD
ENBRSVDPARA
eNBRsvdPara
MOD
ENBRSVDPARA
eNBRsvdPara
MOD
ENBRSVDPARA
eNBRsvdPara
MOD
ENBRSVDPARA
eNBRsvdPara
MOD
ENBRSVDPARA
eNBRsvdPara
MOD
ENBRSVDPARA
eNBRsvdPara
MOD
ENBRSVDPARA
ENodeBAlgoSwitch
MOD
ENODEBALGOSWI
TCH
LST
Handover Algo BTS3900, BTS3900 ENODEBALGOSWI
HoAlgoSwitch switch LTE TCH
ENodeBAlgoSwitch
MOD
ENODEBALGOSWI
TCH
LST
Handover Mode BTS3900, BTS3900 ENODEBALGOSWI
HoModeSwitch switch LTE TCH
ENodeBAlgoSwitch
MOD
ENODEBALGOSWI
TCH
LST
DlIcic algorithm BTS3900, BTS3900 ENODEBALGOSWI
DlIcicSwitch switch LTE TCH
ENodeBAlgoSwitch
MOD
ENODEBALGOSWI
TCH
LST
ANR algorithm BTS3900, BTS3900 ENODEBALGOSWI
AnrSwitch switch LTE TCH
ENodeBAlgoSwitch
MOD
ENODEBALGOSWI
TCH
LST
BTS3900, BTS3900 ENODEBALGOSWI
RedirectSwitch Redirection switch LTE TCH
ENodeBAlgoSwitch
MOD
ENODEBALGOSWI
TCH
LST
MRO algorithm BTS3900, BTS3900 ENODEBALGOSWI
MroSwitch switch LTE TCH
ENodeBAlgoSwitch
MOD
ENODEBALGOSWI
TCH
LST
TpeSwitch TPE switch LTE TCH
ENodeBAlgoSwitch
MOD
ENODEBALGOSWI
TCH
LST
UlIcicTimeSwitch UlIcic time switch LTE TCH
ENodeBAlgoSwitch
MOD
ENODEBALGOSWI
TCH
LST
UlIcicFreqSwitch UlIcic freq switch LTE TCH
ENodeBAlgoSwitch
MOD
ENODEBALGOSWI
TCH
LST
LcsSwitch LCS switch LTE TCH
ENodeBAlgoSwitch
MOD
ENODEBALGOSWI
TCH
LST
TrmSwitch TRM switch LTE TCH
ENodeBAlgoSwitch
MOD
ENODEBALGOSWI
TCH
LST
PciConflictAlmSwitc PCI conflict alarm BTS3900, BTS3900 ENODEBALGOSWI
h switch LTE TCH
ENodeBAlgoSwitch
MOD
ENODEBALGOSWI
TCH
LST
PowerSaveSwitch Power save switch LTE TCH
ENodeBAlgoSwitch
MOD
ENODEBALGOSWI
TCH
LST
RimSwitch RIM switch LTE TCH
ENodeBAlgoSwitch
MOD
ENODEBALGOSWI
TCH
ANR Under RAN LST
RanSharingAnrSwit Sharing Algorithm BTS3900, BTS3900 ENODEBALGOSWI
ch Switch LTE TCH
ENodeBAlgoSwitch
MOD
ENODEBALGOSWI
TCH
LST
Frequency Layer BTS3900, BTS3900 ENODEBALGOSWI
FreqLayerSwtich Switch LTE TCH
ENodeBAlgoSwitch MOD
ENODEBALGOSWI
TCH
LST
CmasSwitch Cmas Switch LTE TCH
ENodeBAlgoSwitch
MOD
ENODEBALGOSWI
TCH
Voice quality LST
monitoring algo BTS3900, BTS3900 ENODEBALGOSWI
VQMAlgoSwitch switch LTE TCH
ENodeBAlgoSwitch
MOD
ENODEBALGOSWI
TCH
LST
UeNumPreemptSwi UE number BTS3900, BTS3900 ENODEBALGOSWI
tch preemption switch LTE TCH
eNodeBAutoPowerOf
MOD
ENODEBAUTOPO
WEROFF
LST
AutoPowerOffSwitc RF module sleep BTS3900, BTS3900 ENODEBAUTOPO
h switch LTE WEROFF
eNodeBAutoPowerOf
MOD
ENODEBAUTOPO
WEROFF
LST
RF module sleep BTS3900, BTS3900 ENODEBAUTOPO
PowerOffTime start time LTE WEROFF
eNodeBAutoPowerOf
MOD
ENODEBAUTOPO
WEROFF
LST
PowerOnTime stop time LTE WEROFF
eNodeBAutoPowerOf
DSP
AutoPoweroffStatus status LTE WEROFF
eNodeBFlowCtrlPara
MOD
ENODEBFLOWCT
RLPARA
Adaptive LST
AdaptUnsyncTimer Unsynchronized BTS3900, BTS3900 ENODEBFLOWCT
Len Timer Length LTE RLPARA
eNodeBFlowCtrlPara
MOD
ENODEBFLOWCT
Adaptive RLPARA
Unsynchronized LST
AdaptUnsyncUserN User Num BTS3900, BTS3900 ENODEBFLOWCT
umThd Threshold LTE RLPARA
LicRatio
Uplink Traffic BTS3900, BTS3900 MOD LICRATIO

UpLicRatio License Ratio LTE LST LICRATIO
LicRatio
BTS3900, BTS3900 MOD LICRATIO

TrafficSharingType Traffic Sharing Type LTE LST LICRATIO
ADD
LICRATIOSHAREP
OLICY
LST
LICRATIOSHAREP
LicRatioSharePolicy OLICY
MOD
LICRATIOSHAREP
OLICY
RMV
BTS3900, BTS3900 LICRATIOSHAREP
CnOperatorId CN Operator ID LTE OLICY
LicRatioSharePolicy ADD
LICRATIOSHAREP
OLICY
MOD
LICRATIOSHAREP
OLICY
LST
TrfRatio TrfRatio LTE OLICY
LicRatioSharePolicy
ADD
LICRATIOSHAREP
OLICY
MOD
LICRATIOSHAREP
OLICY
LST
TrfSharingRatio TrfSharingRatio LTE OLICY
MRO
MRO optimization BTS3900, BTS3900 MOD MRO

OptPeriod period LTE LST MRO
MRO
Ncell optimization BTS3900, BTS3900 MOD MRO

NcellOptThd threshold LTE LST MRO
MRO
MRO statistics BTS3900, BTS3900 MOD MRO

StatNumThd number threshold LTE LST MRO
MRO
Pingpong handover BTS3900, BTS3900 MOD MRO

PingpongTimeThd threshold LTE LST MRO
MRO
Pingpong ratio BTS3900, BTS3900 MOD MRO

PingpongRatioThd threshold LTE LST MRO
MRO
Abnormal coverage BTS3900, BTS3900 MOD MRO

CoverAbnormalThd threshold LTE LST MRO
MRO
Serving cell RSRP BTS3900, BTS3900 MOD MRO

ServingRsrpThd threshold LTE LST MRO
MRO
Neighbour cell BTS3900, BTS3900 MOD MRO

NeighborRsrpThd RSRP threshold LTE LST MRO
MRO
UePingPongNumTh UE PingPong BTS3900, BTS3900 MOD MRO

d Number Threshold LTE LST MRO
SimuLoad
BTS3900, BTS3900 LST SIMULOAD

SimuLoadCfgIndex configuration index LTE MOD SIMULOAD
SimuLoad
BTS3900, BTS3900 MOD SIMULOAD

SimuLoadRbThd RB usage threshold LTE LST SIMULOAD
SimuLoad
Power usage BTS3900, BTS3900 MOD SIMULOAD

SimuLoadPwrThd threshold LTE LST SIMULOAD
SimuLoad
SimuLoadReportPe BTS3900, BTS3900 MOD SIMULOAD
riod Report period LTE LST SIMULOAD
SimuLoad
SimuLoadStatPerio BTS3900, BTS3900 MOD SIMULOAD

d Statistic period LTE LST SIMULOAD
SimuLoad
Frequency selective BTS3900, BTS3900 MOD SIMULOAD

FreqSelSwitch switch LTE LST SIMULOAD
TcpAckCtrlAlgo
MOD
TCPACKCTRLALG
O
LST
TCP ACK Control BTS3900, BTS3900 TCPACKCTRLALG
AckCtrlSwitch Switch LTE O
TcpAckCtrlAlgo
MOD
TCPACKCTRLALG
O
LST
BTS3900, BTS3900 TCPACKCTRLALG
DlMaxThroughput DL Max Throughput LTE O
TcpAckCtrlAlgo
MOD
TCPACKCTRLALG
O
LST
Control Timer BTS3900, BTS3900 TCPACKCTRLALG
CtrlTimerLength Length LTE O
TcpMssCtrl
MOD
TCP MSS Control BTS3900, BTS3900 TCPMSSCTRL
TcpMssCtrlSwitch Switch LTE LST TCPMSSCTRL
TcpMssCtrl
MOD
TCP MSS BTS3900, BTS3900 TCPMSSCTRL
TcpMssThd Threshold LTE LST TCPMSSCTRL
TddFrameOffset
MOD
TDDFRAMEOFFSE
T
LST
BTS3900, BTS3900 TDDFRAMEOFFSE
TimeOffset TDD time offset LTE T
TddResModeSwitch
MOD
Clock-Unavailable TDDRESMODESW
ClkResExcludeSwit Cell Activation BTS3900, BTS3900 LST
ch Switch LTE TDDRESMODESW
TpeAlgo
BTS3900, BTS3900 MOD TPEALGO

PortListNum TCP Port Number LTE LST TPEALGO
TpeAlgo
Port1 TCP Port 1 LTE LST TPEALGO
TpeAlgo
TpeAlgo
TpeAlgo
TpeAlgo
TpeAlgo
TpeAlgo
TpeAlgo
TpeAlgo
TpeAlgo
TpeAlgo
TpeAlgo
TpeAlgo
TpeAlgo
TpeAlgo
TpeAlgo
TpeAlgo
TpeAlgo
TpeAlgo
TpeAlgo
VQMAlgo
BTS3900, BTS3900 MOD VQMALGO

ULDelayJitter UL Delay Jitter LTE LST VQMALGO
Meaning IsKey Mandatory Dynamic Attribute Feature ID
Indicates the
maximum wait time
for an echo
response. If no
echo response is
received during the
period specified by
this parameter, the
timer has expired. NO NO No None
Indicates the
maximum number
of timeouts of the
echo response
waiting timer. If no
echo response is
received after the
number specified
by this parameter is
reached, the GTP-
U path in use fails. NO NO No None
Indicates the
Differentiated
Services Code
Point (DSCP) of a
GTP-U control
packet. NO NO No None
Indicates whether
to enable static
detection in
compliance with
GPRS Tunneling
Protocol for User
Plane (GTP-U). If
this parameter is
set to ENABLE, the
GTP-U static check
is enabled. In this
case, the ALM-
25886 IP Path Fault
alarm is reported if
a link bearing an IP
path is faulty. If this
parameter is set to
DISABLE, the GTP-
U static check is
disabled. NO NO No None
Indicates the name LOFD-003010 /

of the CA. YES YES No TDLOFD-003010
Indicates the URL

of the CA. The URL
can be either an
HTTP or HTTPS
URL. The IP
address in the URL
must be a valid IP
address. The
default port number
is 80 for HTTP or LOFD-003010 /
443 for HTTPS. NO YES No TDLOFD-003010
Indicates the
signature algorithm
for message of
CMP. The signature
algorithm can be
Secure Hash
Algorithm 1 (SHA1)
or Secure Hash
Algorithm 256 LOFD-003010 /
(SHA256). NO NO No TDLOFD-003010
initially obtaining a
certificate during
site deployment
and UPDSIP and
URL as the source
and destination
addresses for
updating the
certificate
automatically and
manually and
applying for the
certificate
manually.When the
parameter is set to
CFG_UPD_SIP, the
INITREQURL and
INITREQSIP do not
need to be
configured. When
the certificate is
obtained initially
during site
deployment, the
certificate is applied
for manually, or the
certificate is
updated
automatically or
manually, the base
station uses the
UPDSIP and URL
address as the
source and
destination
addresses, LOFD-003010 /
respectively. NO NO No TDLOFD-003010
Indicates the
source address for
certificate
management, such
as automatic
certificate update,
manual certificate
update, and manual
certificate
application. If the
source address for
certificate
application in site
deployment is not
configured, the
address will be
used as the source
address for
acquiring the
certificate for the LOFD-003010 /
first time. NO NO No TDLOFD-003010
Indicates the URL
of the CA that is
used during site
deployment. The
URL can be either
an HTTP or HTTPS
URL. In the URL,
the IP address must
be a valid IP
address, and the
default port number
is 80 for HTTP or
443 for HTTPS.
This parameter is
mandatory when
the CA uses
different URLs
during site
deployment or LOFD-003010 /
certificate update. NO YES No TDLOFD-003010
Indicates the
source IP address
for the BS to
access the CA and
to initially obtain a
certificate. This
parameter is
mandatory when
the CA uses
different URLs in
the following
scenarios:
-The BS initially
obtains a certificate
during site
deployment.
-A certificate is LOFD-003010 /
updated. NO YES No TDLOFD-003010
Indicates the
common name of
the certificate
request file, which
can be the
electronic serial
number (ESN),
media access
control (MAC)
address, or IP LOFD-003010 /
address of a board. NO NO No TDLOFD-003010
Indicates the
additional
information about a
certificate common
name. The
information will be
added behind the
value of the
COMMNAME
parameter to
compose a
complete common
name for a
certificate request
file. The default
value is LOFD-003010 /
.huawei.com. NO NO No TDLOFD-003010
Indicates the
country where a BS LOFD-003010 /
is located. NO NO No TDLOFD-003010
Indicates the
organization that LOFD-003010 /
owns a BS. NO NO No TDLOFD-003010
Indicates the
organization unit LOFD-003010 /
that owns a BS. NO NO No TDLOFD-003010
Indicates the state

or province where a LOFD-003010 /
BS is located. NO NO No TDLOFD-003010
Indicates the LOFD-003010 /
location of a BS. NO NO No TDLOFD-003010
Indicates the usage

for a key, including
KEY_AGREEMENT
(key negotiation),
DATA_ENCIPHER
MENT (data
encryption),
KEY_ENCIPHERM
ENT (key
encryption), and
DIGITAL_SIGNATU
RE (digital
signature). This
parameter can be
set to one or LOFD-003010 /
multiple values. NO NO No TDLOFD-003010
Indicates the
signature algorithm
for a certificate
request file. The
signature algorithm
can be Secure
Hash Algorithm 1
(SHA1), Message-
Digest Algorithm 5
(MD5) or Secure
Hash Algorithm 256 LOFD-003010 /
(SHA256). NO NO No TDLOFD-003010
Indicates the length
of a key, which can
be 1024 bits or LOFD-003010 /
2048 bits. NO NO No TDLOFD-003010
Indicates the local
name of a BS. This
parameter is used
to generate the
DNS name of the
subject alternative
name of a
certificate, so as to
verify the peer's
identification in IKE
negotiation. If this
parameter is not
configured, the BS
automatically uses
the common name
and its additional
information to
generate the DNS LOFD-003010 /
name. NO NO No TDLOFD-003010
Indicates the IP
address of the
subject alternative
name of a LOFD-003010 /
certificate. NO NO No TDLOFD-003010
Indicates the file
name of a device
certificate. The file
name cannot
include any of the
following
characters:
backslashes (\),
slashes (/), colons
(:), asterisks (*),
question marks (?),
double quotation
marks ("), left angle
brackets (<), right
angle brackets (>), LOFD-003010 /
and bars (|). YES YES No TDLOFD-003010
Indicates the status

of a device
certificate. NO NO Yes None
Indicates the serial
number of a device
Indicates the
common name of a
device certificate. NO NO Yes None
Indicates the issuer
of a device
Indicates the
expiration date of a
Indicates the date
when a device
certificate begins to
take effect. NO NO Yes None
Indicates the
application type of
activated device
certificate. There
are two types: IKE LOFD-003010 /
and SSL. YES YES No TDLOFD-003010
Indicates the file

name of an
activated device
name cannot
include any of the
following
characters:
backslashes (\),
slashes (/), colons
(:), asterisks (*),
question marks (?),
double quotation
brackets (<), right
and bars (|). NO YES No TDLOFD-003010
of an activated
Indicates the
common name of
an activated device
number of an
activated device
Indicates the
expiration date of
an activated device
Indicates the IKE
name of the peer
device, which is
used in IKE
negotiation with the
local end to test an
activated device
certificate. This
parameter is used
only in the TST
APPCERT
command in the
current version and
will be removed in
later versions. NO NO No None
Indicates the date
when an activated
device certificate
begins to take
effect. NO NO Yes None
Indicates the
loading status of an
activated device
Indicates the
certificate
application type
supported by a BS. NO NO Yes None
Indicates the name

of the cross-
name cannot
include any of the
following
characters:
backslashes (\),
slashes (/), colons
(:), asterisks (*),
question marks (?),
double quotation
brackets (<), right
number of the
cross-certificate. NO NO Yes None
Indicates the
common name of
the cross-certificate. NO NO Yes None
of the cross-
Indicates the
expiration date of
Indicates the
loading status of
Indicates the date
when the cross-
Indicates the file

name of the trusted
name cannot
include any of the
following
characters:
backslashes (\),
slashes (/), colons
(:), asterisks (*),
question marks (?),
double quotation
brackets (<), right
number of the
trusted certificate. NO NO Yes None
Indicates the
common name of
the trusted
of the trusted
Indicates the
expiration date of
the trusted
Indicates the
loading status of
the trusted
Indicates the date
when the trusted
Indicates the file

name of a CRL.
The file name
cannot include any
of the following
characters:
backslashes (\),
slashes (/), colons
(:), asterisks (*),
question marks (?),
double quotation
brackets (<), right
Indicates the
loading status of a
CRL. NO NO Yes None

of a CRL. NO NO Yes None
Indicates the next
update time of the
CRL. NO NO Yes None
Indicates the
current update time
of the CRL. NO NO Yes None
Indicates the IP
address of an FTP
server or LDAP LOFD-003010 /
server. NO YES No TDLOFD-003010
Indicates the user
name used to log in
to an FTP server or LOFD-003010 /
LDAP server. NO NO No TDLOFD-003010
Indicates the
password used to
log in to an FTP
server or LDAP LOFD-003010 /
server. NO NO No TDLOFD-003010
Indicates the port

number of an LDAP LOFD-003010 /
server. NO NO No TDLOFD-003010
Indicates the file

name of a CRL.
The file name
cannot include any
of the following
characters:
backslashes (\),
slashes (/), colons
(:), asterisks (*),
question marks (?),
double quotation
brackets (<), right
and bars (|). NO YES No TDLOFD-003010
Indicates whether
to update the CRL
at the next update
time specified in the
CRL that is
obtained during the
latest update. If this
parameter is set to
ENABLE, the BS
automatically
updates the CRL
when the next
update time
specified in the CRL
arrives. If this
parameter is set to
DISABLE, the BS
automatically
updates the CRL
based on the
configured updating LOFD-003010 /
period. NO NO No TDLOFD-003010
Indicates the
interval at which the
BS automatically
obtains the CRL
from the FTP server LOFD-003010 /
or LDAP server. NO NO No TDLOFD-003010
Indicates the ID of
the task for
periodically LOFD-003010 /
obtaining the CRL. YES YES No TDLOFD-003010
Indicates the
method using which
the BS periodically LOFD-003010 /
obtains a CRL. NO NO No TDLOFD-003010
Indicates the name

of a node found in LOFD-003010 /
an LDAP server. NO NO No TDLOFD-003010
Indicates the
source IP address
for downloading
CRLs. If this
parameter is set to
0.0.0.0, the BS
automatically uses
the OM IP address
of the main control
board as the source
IP to access the CA
and to update a LOFD-003010 /
certificate. NO NO No TDLOFD-003010
Indicates whether a
task of certificate
validity checking is LOFD-003010 /
started. NO NO No TDLOFD-003010
Indicates the
interval between
certificate validity LOFD-003010 /
checking tasks. NO NO No TDLOFD-003010
Indicates the
threshold for a
certificate expiration
alarm. If the
eNodeB detects
that the interval
between its current
time and the
expiration date of
an activated device
certificate is shorter
than the threshold,
an Imminent
Certificate Expiry LOFD-003010 /
alarm is reported. NO NO No TDLOFD-003010
Indicates the
method for updating
a certificate that
has expired or is
about to expire.
There are two
methods: proxy and
CMP. If the proxy
method is used, the
BS uses the M2000
as the proxy to
update the
certificate from the
Certificate Authority
(CA). If the CMP
method is used, the
BS directly updates
the certificate from LOFD-003010 /
the CA. NO NO No TDLOFD-003010
NOVERIFY
indicates that the
BS does not
perform CRL-based
certificate checks
on the peer device.
The value ALARM
indicates that the
BS performs CRL-
based certificate
checks on the peer
device and reports
ALM-26832 Peer
Certificate Expiry if
the peer certificate
has been revoked.
The value
DISCONNECT
indicates that the
BS performs CRL-
based certificate
checks on the peer
device. If the BS
finds that the peer
certificate has been
revoked, the BS
stops the link
peer device and
reports ALM-26832
Peer Certificate
Expiry. If the BS
finds that the CRL
expires, the BS
stops the link
negotiation with the LOFD-003010 /
peer device. NO NO No TDLOFD-003010
Indicates the ID of
the Access Control
List (ACL) to which
the access control
rule belongs. ACL
ID in the range from
3000 to 3999
identifies high-level
rules based on the
layer 3 and layer 4
information. ACL ID
in the range from
4000 to 4999
identifies access LOFD-003009 /
control rules based TDLOFD-003009
on the MAC layer LOFD-00301401 /
information. YES YES No TDLOFD-00301401
Indicates the index
of a VRF instance.
The NodeB
currently supports
default routes
domain only (the
VRF index is 0). NO NO No None
LOFD-003009 /
Indicates the brief TDLOFD-003009
description of the LOFD-00301401 /
ACL. NO NO No TDLOFD-00301401
Indicates whether
the object can be
modified or deleted
by the system. The
value
MANUAL_MODE
means that only the
user can modify or
delete the object.
The value
AUTO_MODE
means that both the
system and the
user can modify or
delete the object. NO NO No None
Indicates whether
the object is
created by the
system.
MANUAL_CREATE
D means that the
object is configured
by the user
manually.
AUTO_CREATED
means that the
object is created by
the system. NO NO No None
Indicates the ID of
the IPv6 Access
Control List (ACL) LBFD-003006 /
to which the IPv6 TDLBFD-003006
access control rule LOFD-00301401 /
belongs. YES YES No TDLOFD-00301401
LBFD-003006 /
Indicates the brief TDLBFD-003006
description of an LOFD-00301401 /
IPv6 ACL. NO NO No TDLOFD-00301401
Indicates whether
the object can be
modified or deleted
by the system. The
value
MANUAL_MODE
means that only the
user can modify or
delete the object.
The value
AUTO_MODE
means that both the
system and the
user can modify or
Indicates whether
the object is
created by the
system.
MANUAL_CREATE
D means that the
by the user
manually.
AUTO_CREATED
means that the
Indicates the ID of
the Access Control LOFD-003009 /
List (ACL) to which TDLOFD-003009
the ACL rule LOFD-00301401 /
LOFD-003009 /
TDLOFD-003009
Indicates the ID of LOFD-00301401 /
the ACL rule. YES YES No TDLOFD-00301401
Indicates the action
taken on the data
that matches the
ACL rule. When the
ACL to which the
ACL rule belongs is
referenced by a
packet filter, the BS
accepts or transmits
the data that
matches the rule if
this parameter is
set to PERMIT, and
rejects the data if
this parameter is
set to DENY. When
the ACL is
referenced by an
IPSec policy, the
BS encrypts or
decrypts the data
that matches the
rule if this
parameter is set to
PERMIT, and does
not perform any
encryption or
decryption on the LOFD-003009 /
data if this TDLOFD-003009
parameter is set to LOFD-00301401 /
DENY. NO NO No TDLOFD-00301401

protocol type of the TDLOFD-003009
data to which the LOFD-00301401 /
ACL rule is applied. NO YES No TDLOFD-00301401
Indicates the
source IP address
of data to which the
ACL rule is applied.
To add an ACL rule
that is applicable to
data of all source IP LOFD-003009 /
addresses, set this TDLOFD-003009
parameter to LOFD-00301401 /
0.0.0.0. NO YES No TDLOFD-00301401
Indicates the
wildcard of the
source IP address.
The wildcard is
used to determine
which bits can be
neglected when IP
address matching is
being performed.
Generally, it can be
considered as the LOFD-003009 /
inverse of the TDLOFD-003009
corresponding LOFD-00301401 /
subnet mask. NO YES No TDLOFD-00301401
Indicates whether
to check the source
port number of LOFD-003009 /
each data stream TDLOFD-003009
before applying the LOFD-00301401 /
ACL rule. NO YES No TDLOFD-00301401
OP_GT, the ACL
rule is applied to
the data stream
whose source port
number is larger
than or equal to the
configured port
number. If this
parameter is set to
OP_EQ, the ACL
rule is applied to
the data stream
whose source port
number is equal to
the configured port
number. If this
parameter is set to
OP_NEQ, the ACL
rule is applied to
the data stream
whose source port
number is not equal
to the configured
port number. If this
parameter is set to
OP_RANGE, the
ACL rule is applied
to the data stream
whose destination
port number is
within the
configured
range.OP_NEQ is
available only on LOFD-003009 /
the TDLOFD-003009
LMPT,UMPT,UTRP LOFD-00301401 /
c and SMPT. NO YES No TDLOFD-00301401
Indicates the
source port number
used when SMPT is
set to YES. If SOP
is set to
OP_RANGE, this
parameter indicates
the smallest source
port number. If SOP
is not set to
OP_RANGE, this LOFD-003009 /
parameter indicates TDLOFD-003009
a specific source LOFD-00301401 /
port number. NO YES No TDLOFD-00301401
Indicates the
source port number
used when SMPT is
set to YES. If SOP
is set to
OP_RANGE, this
parameter indicates
the largest source
port number. This LOFD-003009 /
parameter is valid TDLOFD-003009
only when SOP is LOFD-00301401 /
set to OP_RANGE. NO YES No TDLOFD-00301401
Indicates the
destination IP
address of data to
which the ACL rule
is applied. To add
an ACL rule that is
applicable to data
of all destination IP LOFD-003009 /
addresses, set this TDLOFD-003009
parameter to LOFD-00301401 /
0.0.0.0. NO YES No TDLOFD-00301401
Indicates the
wildcard of the
destination IP
address. The
wildcard is used to
determine which
bits can be
neglected when IP
address matching is
being performed.
Generally, it can be
considered as the LOFD-003009 /
inverse of the TDLOFD-003009
subnet mask. NO YES No TDLOFD-00301401
Indicates whether
to check the
destination port
number of each LOFD-003009 /
data stream before TDLOFD-003009
applying the ACL LOFD-00301401 /
rule. NO YES No TDLOFD-00301401
the data stream
whose destination
port number is
larger than or equal
to the configured
parameter is set to
OP_EQ, the ACL
rule is applied to
the data stream
whose destination
port number is
equal to the
configured port
number. If this
parameter is set to
OP_NEQ, the ACL
rule is applied to
the data stream
whose destination
port number is not
equal to the
configured port
number. If this
parameter is set to
OP_RANGE, the
ACL rule is applied
to the data stream
whose destination
port number is
within the
configured
range.OP_NEQ is
available only on LOFD-003009 /
the TDLOFD-003009
LMPT,UMPT,UTRP LOFD-00301401 /
c and SMPT. NO YES No TDLOFD-00301401
Indicates the
destination port
number used when
DMPT is set to
YES. If DOP is set
to OP_RANGE, this
parameter indicates
the smallest
destination port
number. If DOP is
not set to
OP_RANGE, this
parameter indicates LOFD-003009 /
a specific TDLOFD-003009
destination port LOFD-00301401 /
number. NO YES No TDLOFD-00301401
Indicates the
destination port
number used when
DMPT is set to
YES. If DOP is set
to OP_RANGE, this
parameter indicates
the largest
destination port
number. This LOFD-003009 /
parameter is valid TDLOFD-003009
only when DOP is LOFD-00301401 /
Indicates whether
to check the DSCP LOFD-003009 /
of each data stream TDLOFD-003009
ACL rule. NO NO No TDLOFD-00301401

Differentiated TDLOFD-003009
Services Code LOFD-00301401 /
Point (DSCP). NO YES No TDLOFD-00301401
Indicates whether
to match the
fragment message.
The ACL rules for
matching fragment
messages apply to
only packet filtering LOFD-003009 /
and does not apply TDLOFD-003009
to the IPSec LOFD-00301401 /
function. NO NO No TDLOFD-00301401
Indicates whether
the object can be
modified or deleted
by the system. The
value
MANUAL_MODE
means that only the
user can modify or
delete the object.
The value
AUTO_MODE
means that both the
system and the
user can modify or
Indicates the filter
criteria for VLAN
IDs. This parameter
is valid only when
ACLID ranges from
4000 to 4999.
When this
parameter is set to
OP_EQ, only the
VLAN ID specified
by VLANID1 is a
valid one. When
this parameter is
set to OP_RANGE,
all the VLAN IDs
within the range of
VLANID1 to
VLANID2 are valid
ones. When this
parameter is set to
OP_NOVLAN, only LOFD-003009 /
packets without TDLOFD-003009
VLAN tags are valid LOFD-00301401 /
ones. NO YES No TDLOFD-00301401
Indicates the ID of a
VLAN to which
service data
belongs. When
Source Port
Operate is set to
OP_EQ, this
parameter specifies
the ID of the
matching VLAN.
When Source Port
Operate is set to
OP_RANGE, this
parameter specifies LOFD-003009 /
the minimum ID of TDLOFD-003009
the matching LOFD-00301401 /
VLANs. NO YES No TDLOFD-00301401
VLAN to which
service data
belongs. When
Source Port
Operate is set to
OP_RANGE, this
parameter specifies
the maximum ID of
the matching
VLANs. This
parameter is valid LOFD-003009 /
only when Source TDLOFD-003009
Port Operate is set LOFD-00301401 /
to OP_RANGE. NO YES No TDLOFD-00301401
Indicates whether
the object is
created by the
system.
MANUAL_CREATE
D means that the
by the user
manually.
AUTO_CREATED
means that the
Indicates the ID of
the IPv6 Access
Control List (ACL) LBFD-003006 /
access control rule LOFD-00301401 /
LBFD-003006 /
TDLBFD-003006
the IPv6 ACL rule. YES YES No TDLOFD-00301401
Indicates the action
taken on the data
that matches the
IPv6 ACL rule.
When the IPv6 ACL
is referenced by an
IPv6 IPSec policy,
the BS encrypts or
decrypts the data
that matches the
rule if this
parameter is set to
PERMIT, and does
not perform any
encryption or
decryption on the LBFD-003006 /
data if this TDLBFD-003006
DENY. NO NO No TDLOFD-00301401
Indicates the
protocol type of the LBFD-003006 /
data to which the TDLBFD-003006
IPv6 ACL rule is LOFD-00301401 /
applied. NO YES No TDLOFD-00301401
Indicates the
source IPv6 LBFD-003006 /
address of data to TDLBFD-003006
which the IPv6 ACL LOFD-00301401 /
rule is applied. NO YES No TDLOFD-00301401
Indicates the prefix
length of the source
IPv6 address. The
prefix length is used
to determine which
bits must be
compared for
matching when LBFD-003006 /
IPv6 address TDLBFD-003006
matching is being LOFD-00301401 /
performed. NO YES No TDLOFD-00301401
Indicates whether
to check the source
port number of LBFD-003006 /
each data stream TDLBFD-003006
ACL rule. NO YES No TDLOFD-00301401
number is smaller
configured port
number. If this
parameter is set to
OP_GT, the ACL
rule is applied to
the data stream
whose source port
number is larger
configured port
number. If this
parameter is set to
OP_EQ, the ACL
rule is applied to
the data stream
whose source port
number is equal to
the configured port
number. If this
parameter is set to
OP_NEQ, the ACL
rule is applied to
the data stream
whose source port
number is not equal
to the configured
parameter is set to
OP_RANGE, the
ACL rule is applied
to the data stream
whose destination LBFD-003006 /
port number is TDLBFD-003006
within the LOFD-00301401 /
configured range. NO YES No TDLOFD-00301401
Indicates the
source port number
used when SMPT is
set to YES. If SOP
is set to
OP_RANGE, this
parameter indicates
the smallest source
port number. If SOP
is not set to
OP_RANGE, this LBFD-003006 /
parameter indicates TDLBFD-003006
a specific source LOFD-00301401 /
port number. NO YES No TDLOFD-00301401
Indicates the
source port number
used when SMPT is
set to YES. If SOP
is set to
OP_RANGE, this
parameter indicates
the largest source
port number. This LBFD-003006 /
parameter is valid TDLBFD-003006
only when SOP is LOFD-00301401 /
Indicates the
destination IPv6 LBFD-003006 /
address of data to TDLBFD-003006
which the IPv6 ACL LOFD-00301401 /
rule is applied. NO YES No TDLOFD-00301401
length of the
destination IPv6
address. The prefix
length is used to
determine which
bits must be
compared for
matching when LBFD-003006 /
IPv6 address TDLBFD-003006
matching is being LOFD-00301401 /
performed. NO YES No TDLOFD-00301401
Indicates whether
to check the
destination port
number of each LBFD-003006 /
data stream before TDLBFD-003006
applying the ACL LOFD-00301401 /
rule. NO YES No TDLOFD-00301401
configured port
number. If this
parameter is set to
OP_GT, the ACL
rule is applied to
the data stream
whose destination
port number is
to the configured
parameter is set to
OP_EQ, the ACL
rule is applied to
the data stream
whose destination
port number is
equal to the
configured port
number. If this
parameter is set to
OP_NEQ, the ACL
rule is applied to
the data stream
whose destination
port number is not
equal to the
configured port
number. If this
parameter is set to
OP_RANGE, the
ACL rule is applied
to the data stream
whose destination LBFD-003006 /
port number is TDLBFD-003006
within the LOFD-00301401 /
configured range. NO YES No TDLOFD-00301401
Indicates the
destination port
number used when
DMPT is set to
YES. If DOP is set
to OP_RANGE, this
parameter indicates
the smallest
destination port
number. If DOP is
not set to
OP_RANGE, this
parameter indicates LBFD-003006 /
a specific TDLBFD-003006
destination port LOFD-00301401 /
number. NO YES No TDLOFD-00301401
Indicates the
destination port
number used when
DMPT is set to
YES. If DOP is set
to OP_RANGE, this
parameter indicates
the largest
destination port
number. This LBFD-003006 /
parameter is valid TDLBFD-003006
only when DOP is LOFD-00301401 /
Indicates whether
to check the DSCP LBFD-003006 /
of each data stream TDLBFD-003006
IPv6 ACL rule. NO NO No TDLOFD-00301401
LBFD-003006 /
Indicates the DSCP TDLBFD-003006
that complies with LOFD-00301401 /
an IPv6 ACL rule. NO YES No TDLOFD-00301401
Indicates whether
the object can be
modified or deleted
by the system. The
value
MANUAL_MODE
means that only the
user can modify or
delete the object.
The value
AUTO_MODE
means that both the
system and the
user can modify or
Indicates whether
the object is
created by the
system.
MANUAL_CREATE
D means that the
by the user
manually.
AUTO_CREATED
means that the
Indicates the
cabinet No. to
which a BFD
session belongs. YES NO No None
Indicates the
subrack No. to
which a BFD
session belongs. YES NO No None
Indicates the slot

No. to which a BFD
session belongs. YES YES No None
BFD session. The
session ID plus 1 is
the local
discriminator of the
BFD session. The
local discriminator
must be consistent
with the
configuration at the LOFD-003007 /
peer side. YES YES No TDLOFD-003007
Indicates the index

of a VRF instance.
The NodeB
currently supports
default routes
domain only (the
Indicates the
source IP address
of the BFD session.
The source IP
address of a BFD
session must be a
device IP address
of a specified board
(for example, the IP
address of an
Ethernet port or a
port that carries a
PPP link or MP
group) or a logical
IP address (for
example, the IP
address of a
loopback port), but
cannot be set to the
same value as the
IP address of a
remote
maintenance
channel or a
negotiated IP
address. Note that
a BFD session
cannot be
configured as a
single-hope session
if its source IP
address is a logical LOFD-003007 /
IP address. NO YES No TDLOFD-003007
Indicates the
destination IP
address of a BFD
session. The
destination IP
address must be a
valid IP address,
and cannot be set
to 0.0.0.0 or any
existing IP
addresses in the
system. If Virtual
Router Redundancy
Protocol (VRRP) is
used in the
network, two BFD
sessions must be
configured with the
destination IP
addresses set to
the active and
standby physical IP
addresses of the
virtual router, LOFD-003007 /
respectively. NO YES No TDLOFD-003007
Indicates the hop

type of the BFD
session. The single-
hop BFD session is
used to perform
point-to-point
detection at the
data link layer, and
often used in layer
2 networking
scenarios. The
multi-hop BFD
session is used to
perform end-to-end
connectivity checks
at the transport
layer, and often
used in layer 3
networking LOFD-003007 /
scenarios. NO YES No TDLOFD-003007
Indicates the
minimum interval at
which the BFD
session transmits LOFD-003007 /
control packets. NO NO No TDLOFD-003007
Indicates the
minimum interval at
which the BFD
session receives LOFD-003007 /
control packets. NO NO No TDLOFD-003007
Indicates the
detection multiplier LOFD-003007 /
of a BFD session. NO NO No TDLOFD-003007
Indicates the type

of the BFD session.
If this parameter is
set to
MAINTENANCE,
this BFD session is
used only for
continuity check
(CC). If this
parameter is set to
RELIABILITY, the
BFD session is
used to trigger
route interlock.
Route interlock
enables the
standby route to
take over once the
active route
becomes faulty, and
therefore prevents
service interruption
caused by route LOFD-003007 /
failures. NO NO No TDLOFD-003007
Indicates the
Differentiated
Services Code
Point (DSCP). The
priority has a
positive correlation
with the value of LOFD-003007 /
this parameter. NO NO No TDLOFD-003007
Indicates whether
to delete the
historical statistics.
set to YES, the
historical statistics
are deleted and a
new round of
statistics collecting
starts upon
completion of the
query. NO NO Yes None
Indicates the state

of a BFD session. NO NO Yes None
Indicates the
effective detection
mode through
negotiation. NO NO Yes None
Indicates the
effective minimum
TX interval through
Indicates the
effective minimum
RX interval through
Indicates the
detection time when
the negotiation
takes effect. NO NO Yes None
Indicates the local

discriminator of the
BFD session. The
value of this
parameter is equal
to the session
number plus 1. NO NO Yes None
Indicates the peer
descriminator of a
BFD session. NO NO Yes None
Indicates the
number of
transmitted packets
of a BFD session. NO NO Yes None
Indicates the
number of
messages received
by the BFD
session. NO NO Yes None
Indicates the up-to-
down number of a
BFD session. NO NO Yes None
Indicates the
diagnostic field of
the BFD session,
that is, the cause of
the latest failure. NO NO Yes None
Indicates the
protocol version of LOFD-003007 /
a BFD session. NO NO No TDLOFD-003007
Indicates the
deployment position
of a digital
certificate. If this
parameter is set to
DEFAULT, the
certificate is
configured on the
main control board.
set to SPECIFIC,
the certificate is
configured on the
board in the LOFD-003010 /
specified slot. NO NO No TDLOFD-003010
Indicates the
number of the
cabinet where a LOFD-003010 /
board is located. NO NO No TDLOFD-003010
Indicates the
number of the
subrack where a LOFD-003010 /
board is located. NO NO No TDLOFD-003010
Indicates the
number of the slot
where a board is LOFD-003010 /
located. NO NO No TDLOFD-003010
Indicates the name

of the MD to which LOFD-00300402 /
the RMEP belongs. YES YES No TDLOFD-00300402
Indicates the name

of the MA to which LOFD-00300402 /
Indicates the RMEP LOFD-00300402 /

ID. YES YES No TDLOFD-00300402
Indicates the index

of a VRF instance.
The NodeB
currently supports
default routes
domain only (the
VRF index is 0). YES NO No None
address
dynamically
negotiated on the
PPP/MLPPP link.
When the IP
address is bound,
the existing IP
address of the
system may conflict
with the IP address
to be configured,
run the LST/DSP
(DEVIP, OMCH,
PPPLNK, LOCALIP,
MPGRP, or IPRT)
command to query
the IP address of
the system (such as
device IP address,
local IP address of
the remote
maintenance
channel, local IP
address of the PPP
link, IP address of
the local
maintenance
channel, local IP
address of the
MLPPP group, or
the next hop IP
address) that
conflicts with the IP
address to be
bound. The fault
needs to be cleared LOFD-00300402 /
manually. YES YES No TDLOFD-00300402
Indicates the name

the MA belongs. YES YES No TDLOFD-00300402

of the MA. YES YES No TDLOFD-00300402
Indicates cabinet
number of the
board to which the
MA belongs. NO NO No None
Indicates subrack
number of the
board to which the
MA belongs. NO NO No None
Indicates slot
number of the
board to which the
MA belongs. NO YES No None
Indicates whether
the MA is
associated with the LOFD-00300402 /
VLAN. NO NO No TDLOFD-00300402
Indicates the ID of
the VLAN with
which the MA is LOFD-00300402 /
associated. NO NO No TDLOFD-00300402
Indicates the
priority of the VLAN
with which the MA LOFD-00300402 /
is associated. NO NO No TDLOFD-00300402
Indicates the
CFM MA transmits
continuity check LOFD-00300402 /
messages (CCMs). NO NO No TDLOFD-00300402
Indicates the
number of local
MEPs in an MA. NO NO Yes None
Indicates the
number of RMEPs
in an MA. NO NO Yes None
Indicates the list of
local MEPs in an
MA. NO NO Yes None

RMEPs in an MA. NO NO Yes None

of the CFM MD. YES YES No TDLOFD-00300402
Indicates the level LOFD-00300402 /
of the CFM MD. NO NO No TDLOFD-00300402
Indicates the
number of MAs in a
CFMMD. NO NO Yes None
all MAs in a
CFMMD. NO NO Yes None
Indicates the name

the MEP belongs. YES YES No TDLOFD-00300402
Indicates the name

the MEP belongs. YES YES No TDLOFD-00300402
Indicates the MEP LOFD-00300402 /

Indicates cabinet
number of the
board to which the
MEP belongs. NO NO No None
Indicates subrack
number of the
board to which the
MEP belongs. NO NO No None
Indicates slot
number of the
board to which the
MEP belongs. NO YES No None
Indicates the type

of subboard on the
board where the
MEP is located. NO YES No None
Indicates the port

type of MEP. NO YES No None
Indicates the port

number of the MEP. NO YES No None
Indicates whether
to enable the
continuity check LOFD-00300402 /
(CC) of the CFM. NO NO No TDLOFD-00300402
VLAN of the MA to
which the MEP
belongs. NO NO Yes None
VLAN of the MA to
which the MEP
Indicates the
priority of a VLAN
of the MA to which
the MEP belongs. NO NO Yes None
Indicates the
number of
transmitted
Connectivity Check
(CC) packets. NO NO Yes None
Indicates the
number of received
Connectivity Check
(CC) packets. NO NO Yes None
Indicates the
number of
transmitted
loopback packets. NO NO Yes None
Indicates the
number of received
loopback packets. NO NO Yes None
Indicates the
number of
transmitted traced
over packets.
Indicates the NO NO Yes None
number of received
traced over
packets. NO NO Yes None
Indicates the
number of sent
DMM frames. NO NO Yes None
Indicates the
number of received
DMR frames. NO NO Yes None
Indicates the jitter

standard deviation.
This parameter
measures the
standard deviation
of jitters sampled in
the latest
measurement
period of 5s
compared with the
average jitter. NO NO Yes None
Indicates the
accumulated RTT
delay in the latest
measurement
period of 5s. NO NO Yes None
Indicates the
number of
transmitted packets
CFM packets. NO NO Yes None
Indicates the
number of
transmitted packets
CFM packets. NO NO Yes None
Indicates the
number of
transmitted packets
CFM packets
discarded. NO NO Yes None
Indicates the
number of received
packets CFM
packets discarded. NO NO Yes None
Indicates the
number of frames
sent by the local
end in the activation
period.When the TX
and RX frame
counters flip or the
counters are reset,
the measurement
result of this
parameter is lost by
one time. NO NO Yes None
Indicates the
number of frames
received by the
peer end in the
activation
period.When the TX
and RX frame
counters are reset,
the measurement
result of this
Indicates the
number of frames
sent by the peer
end in the activation
period.When the TX
and RX frame
counters are reset,
the measurement
result of this
Indicates the
number of frames
received by the
local end in the
activation
period.When the TX
and RX frame
counters are reset,
the measurement
result of this
Indicates the
absolute difference
between the
number of frames
sent by the local
end and the
number of frames
received by the
peer end in the
activation
period.Generally,
the number of
frames sent is
greater than or
equal to the number
of frames received,
and this parameter
indicates the
severity of packet
loss. In the case of
transmission
disorder, abnormal
measurement result
of the local or peer
end, or monitoring
policy
inconsistency, the
number of frames
sent may be smaller
than the number of
frames received. In
this case, this
parameter indicates
the severity of
abnormal
measurement. NO NO Yes None
Indicates the
absolute difference
between the
number of frames
sent by the local
end and the
number of frames
received by the
peer end in the
activation
period.Generally,
the number of
frames sent is
greater than or
equal to the number
of frames received,
and this parameter
indicates the
severity of packet
loss. In the case of
transmission
disorder, abnormal
measurement result
of the local or peer
end, or monitoring
policy
inconsistency, the
number of frames
sent may be smaller
than the number of
frames received. In
this case, this
parameter indicates
the severity of
abnormal
Indicates the
number of sent
LMM frames. NO NO Yes None
Indicates the
number of received
LMR frames. NO NO Yes None
Indicates the state
of ITU-T Y.1731
performance
Indicates the name

Indicates the name
Indicates the RMEP LOFD-00300402 /

Indicates the MAC

address of the
RMEP. It must be a
valid unicast
address in the
format of XXXX-
XXXX-XXXX. The
MAC address of the
RMEP can be
obtained from the
MAC address field
carried in the CCM
message. If the
MAC address
configured by the
user is different
from that carried in
the CCM message,
the MAC address
carried in the MAC LOFD-00300402 /
message prevails. NO NO No TDLOFD-00300402

of the RMEP. NO NO Yes None
Indicates the actual
MAC address of the
RMEP. The format
is XXXX-XXXX-
XXXX. NO NO Yes None
Indicates the
priority of a VLAN
of the MA to which
the RMEP belongs. NO NO Yes None
VLAN of the MA to
which the RMEP
Indicates the
number of received
CCM packets from
the RMEP. NO NO Yes None
Indicates the
number of the IP
addresses bound to
the RMEP. NO NO Yes None

the IP addresses
bound to the RMEP. NO NO Yes None
Indicates the
number of a Control
Port (CP) bearer. YES YES No None
Indicates whether
the transport
channel carried on
the CP bearer is a
master or slave
channel. YES YES No None
Indicates the type

of CP bearer.The
NodeB currently
does not support
SCTP6. The
eNodeB currently
does not support
SAAL. NO YES No None
Indicates the
number of a link
carried on the CP
bearer. NO NO No None

of a CP bearer. NO NO Yes None
Indicates whether
the CP bearer is in
use. NO NO Yes None
Indicates whether
the object can be
modified or deleted
by the system. The
value
MANUAL_MODE
means that only the
user can modify or
delete the object.
The value
AUTO_MODE
means that both the
system and the
user can modify or
Indicates whether
the object is
created by the
system.
MANUAL_CREATE
D means that the
by the user
manually.
AUTO_CREATED
means that the
Indicates the
cabinet number of
the board where the
port is located. YES NO No None
Indicates the
subrack number of
the board where the
Indicates the slot
number of the
board where the
port is located. YES YES No None
Indicates the type

of sub-board on the
board where a port
is located. YES YES No None
Indicates the type
of the physical port.
The NodeB
currently does not
support SUBIF. YES YES No None
Indicates the
number of a port. YES YES No None
Indicates the index

of a VRF instance.
The NodeB
currently supports
default routes
domain only (the
Indicates the IP
address configured
for the port. YES YES No None
Indicates the
subnet mask of the
device IP address
configured on the
port. NO YES No None
Indicates the
interface index of
the device IPv6 LBFD-003006 /
address. YES YES No TDLBFD-003006
Indicates the device LBFD-003006 /

IPv6 address. YES YES No TDLBFD-003006
of the prefix of the
device IPv6 LBFD-003006 /
address. NO YES No TDLBFD-003006
of the device IPv6
address. NO NO Yes None
Indicates the time
interval during
which the device
IPv6 address is in
the valid state. NO NO Yes None
Indicates the time

interval during
which the device
IPv6 address is in
the preferred state.
Valid states are
categorized into the
preferred state and
the deprecated
state. In the
preferred state, an
address can be
freely used; in the
deprecated state,
the connections
previously
established on this
address are still
usable, whereas
any connection
newly established
on this address is
not usable. NO NO Yes None
MRFD-231501
LBFD-00300102 /
Indicates whether TDLBFD-00300102
to enable the DHCP LBFD-00300103 /
relay switch. NO NO No TDLBFD-00300103
LBFD-00300102 /
Indicates the IP TDLBFD-00300102
address of the LBFD-00300103 /
DHCP server. YES YES No TDLBFD-00300103
Indicates whether
to enable detection
of automatic
establishment of
the remote
maintenance LOFD-002004 /
channel. NO NO No TDLOFD-002004
Indicates whether
to enable VLAN
scanning for the
base station. NO NO No None
Indicates the rule

for prioritizing traffic
to meet service
requirements. If this
parameter is set to
IPPRECEDENCE,
the protocol stack
of the earlier
version is adopted,
which firstly
converts a Type of
Service (TOS) to a
DSCP and then LBFD-00300201 /
prioritizes traffic. NO NO No TDLBFD-00300201
Indicates the
priority of signaling.
The priority has a
with the value of LBFD-00300201 /
this parameter. NO NO No TDLBFD-00300201
Indicates the
priority of the high-
level OM data. The
priority has a
with the value of LBFD-00300201 /
Indicates the
priority of the low-
level OM data, such
as the data to be
uploaded or
downloaded. The
priority has a
with the value of
this parameter. The
low-level OM data
includes the
packets related to
File Transfer LBFD-00300201 /
Protocol (FTP). NO NO No TDLBFD-00300201
Indicates the
priority of the IP
clock. If the IP clock
that follows the
Precision Time
Protocol (PTP) is
used, set this
parameter to the
DSCP of the PTP
packets. If the IP
clock that follows
the Huawei
proprietary protocol
is used, set this
parameter to the
DSCP of these
packets that follow
the Huawei
proprietary protocol. NO NO No None
Indicates the
number of the
cabinet that
provides the port on
which IEEE 802.1X
authentication is
configured. YES NO No None
Indicates the
number of the
subrack that
which IEEE 802.1X
authentication is
Indicates the
number of the slot
that provides the
port on which IEEE
802.1X
authentication is
configured. YES YES No None
Indicates the type

of sub-board that
which IEEE 802.1X
authentication is
Indicates the
number of the port
on which IEEE
802.1X
authentication is
Indicates the IEEE

802.1X
authentication
method. Currently,
only Extensible
Authentication
Protocol Transport
Layer Security
(EAP-TLS), a
unidirectional
authentication
method, is
supported. NO NO No None
Indicates the
number of
abnormal packets
received during the
802.1X
authentication. NO NO Yes None
Indicates the
number of IEEE
802.1X
authentication
failures. NO NO Yes None
Indicates the cause
of the latest IEEE
802.1X
authentication
failure or the latest
unauthentication
where the BS does
not initiate the
authentication. The
value of this
parameter is
deleted after a
successful IEEE
802.1X
Indicates the
number of received
Extensible
Authentication
Protocol (EAP)
messages. NO NO Yes None

of IEEE 802.1X
authentication.
Possible states are
as follows:
UNAUTHENTICAT
ED(Unauthenticate
d),
AUTHENTICATING
(Authenticating),
AUTHENTIC_SUC
CEED(Authenticate
Succeed),
AUTHENTIC_FAIL(
Authenticate Fail),
and
DHCP_AUTHENTI
CATING(DHCP
Activation
Authenticating). NO NO Yes None
Indicates the
number of
transmitted
Extensible
Authentication
Protocol (EAP)
messages. NO NO Yes None
Indicates the
number of
successful IEEE
802.1X
authentications. NO NO Yes None
Indicates the index
of a VRF instance. YES NO No None
Indicates the
priority of a DSCP.
A larger value of
this parameter
indicates a higher LBFD-00300201 /
priority. YES YES No TDLBFD-00300201
Indicates the
priority of a VLAN. A
larger value of this
a higher priority. NO YES No TDLBFD-003003
Indicates the
cabinet number of
the board where an
E1/T1 port is
located. YES NO No None
Indicates the
subrack number of
the board where an
E1/T1 port is
Indicates the slot

number of the
board where an
E1/T1 port is
located. YES YES No None
Indicates the
number of the
E1/T1 port. YES NO No None
Indicates the range
of E1/T1 ports.
Note that the E1T1
MO with this
parameter set to
ALLPORT is
actually not created
on the BS. NO NO No None
Indicates the
working mode of
the E1/T1 port. This
parameter must be
set to the same
value as that at the
peer end. NO NO No None
Indicates the frame
format used by the
E1/T1 port. NO YES No None
Indicates the line
coding mode of an
E1/T1 port. NO YES No None
Indicates the clock
mode of the E1/T1
port.
1. If the BS extracts
the line clock from
the E1/T1 port, the
clock mode of the
E1/T1 port must be
set to SLAVE. If the
BS provides the line
clock for the lower-
level equipment
through the E1/T1
port, the clock
mode of the E1/T1
port must be set to
MASTER.
Otherwise, the line
clock may fail to
work properly.
2. When the E1/T1
port provides an 8K
clock reference for
the transmission
interface board, the
clock mode of the
E1/T1 port must be
set to SLAVE.
3. The clock modes
of E1/T1 ports used
by an inter-board
MLPPP group
cannot be all set to
SLAVE. NO NO No None
Indicates the
number of the slot
housing the
destination board
whose backplane
has an E1/T1 port. NO YES No None
Indicates the link
running status. The
link running status
is classified into
OK, LOCAL_LOOP,
REMOTE_LOOP,
PAYLOAD_LOOP,
SINGLE_CH_LOOP
,
PHYSICAL_LOOP,
LOS, AIS, RA, LFA,
LMFA, SLIP,
BACKUP, and
OTHERS. NO NO Yes None
Indicates whether
to perform the link
test and the test
type. The test types
are classified into
No Test, Offline
Test, and Online
Test. NO NO Yes None
Indicates whether
the E1/T1 port is
used. NO NO Yes None
Indicates the
remaining loop time
of the E1/T1 port. NO NO Yes None
Indicates the type
of sub-board on the
board where the
E1/T1 port is

work mode of the
E1/T1 port. NO NO Yes None
frame format of the
E1/T1 port. NO NO Yes None

line coding mode of
the E1/T1 port. NO NO Yes None
Indicates the BER

threshold. NO NO No None
Indicates two
mapping methods
between services
and transmission
resource groups:
end point group
mapping and end
point mapping. If
the parameter is set
to
ENDPOINT_GROU
P, all end points of
the user plane in
the end point group
can be added to the
specified
transmission
resource group. If
to ENDPOINT, the
specified peer end
points of the user
plane can be added
to the specified
transmission LOFD-002004 /
resource group. YES NO No TDLOFD-002004
Indicates the end

point group or user
plane peer that
needs to be added
to the specified
resource group. YES YES No TDLOFD-002004
Indicates the
number of the
cabinet where the
transmission
resource group to
which a node maps LOFD-002004 /
is configured. YES NO No TDLOFD-002004
Indicates the
number of the
subrack where the
transmission
resource group to
Indicates the
number of the slot
where the
transmission
resource group to
is configured. YES YES No TDLOFD-002004
Indicates the
subboard type of
the board where the
transmission
resource group to
Indicates the type

of the port where
the transmission
resource group to
Indicates the
number of the port
where the
transmission
resource group to
Indicates the
bearing type of the
transmission
resource group to LOFD-002004 /
which a node maps. YES NO No TDLOFD-002004
Indicates the ID of
the transmission
resource group to LOFD-002004 /
which a node maps. YES YES No TDLOFD-002004
Indicates the
description of the
end point mapping
to resouce
group.This
parameter takes
effect only in LTE. NO NO No None
Indicates the ID of
the end point group
to which an end LOFD-002004 /
point belongs. YES YES No TDLOFD-002004
Indicates the index
of the virtual route
and
forwarding(VRF)
instance. NO NO No None

all SCTP hosts in
the end point group.
This parameter
takes effect only in LOFD-002004 /
LTE. NO YES No TDLOFD-002004
Indicates the ID of
the SCTP host. YES YES No None
all SCTP hosts in
This parameter
LTE. NO NO Yes TDLOFD-002004

all SCTP peers in
This parameter
Indicates the ID of
the SCTP peer. YES YES No None

all SCTP peers in
This parameter
LTE. NO NO Yes TDLOFD-002004
all user-plane hosts
in the end point LOFD-002004 /
group. NO YES No TDLOFD-002004
Indicates the ID of
the user-plane host. YES YES No None
all user plane hosts
group. NO NO Yes TDLOFD-002004
all user-plane peers
group. NO YES No TDLOFD-002004
Indicates the ID of
the user-plane peer. YES YES No None
all user plane peers
group. NO NO Yes TDLOFD-002004
Indicates whether
to enable the ACL
rule self-
configuration
function for packet
filtering. When this
parameter is set to
ENABLE, the
system
automatically
generates packet
filtering rules for all
links of the local
end point. If this
parameter is set to
DISABLE, the LOFD-003014 /
system does not TDLOFD-003014
generate packet LOFD-002004 /
filtering rules. NO NO No TDLOFD-002004
Indicates the
description of an LOFD-002004 /
end point group. NO NO No TDLOFD-002004
Indicates the
cabinet number of
the board where the
Ethernet port is
Indicates the
subrack number of
the board where the
Ethernet port is
Indicates the slot
number of the
board where the
Ethernet port is
Indicates the type

of sub-board on the
board where the
Ethernet port is
Indicates the type
of the Ethernet port. YES YES No None
Indicates the
number of the
Ethernet port. YES YES No None
Indicates the work

mode of the
IEEE802.3ah
Ethernet OAM.
set to ACTIVE, the
local end initiates
the IEEE802.3ah
Ethernet OAM
negotiation.
set to PASSIVE, the
local end does not
initiate the
negotiation;
instead, the local
end waits for
receiving
negotiation packets LOFD-00300401 /
from the peer end. NO NO No TDLOFD-00300401
Indicates the
internal at which a
Protocol Data Unit
(PDU) is
transmitted for fault
detection. A shorter
interval indicates
that Ethernet link
faults can be
detected more LOFD-00300401 /
quickly. NO NO No TDLOFD-00300401
Indicates the size of
the Protocol Data LOFD-00300401 /
Unit (PDU). NO NO No TDLOFD-00300401
Indicates whether
remote loopback
can be enabled at
the port where 3AH
detection is
activated. If remote
loopback is
enabled, the OAM
3AH loopback is
allowed. For details,
see the STR
ETHOAMLOOPTST
command. During
the loopback, only
3AH packets rather
than other types of
packet can be
transmitted. If
remote loopback is
disabled, the local
end cannot initiate LOFD-00300401 /
the loopback. NO NO No TDLOFD-00300401
Indicates whether
to enable indication LOFD-00300401 /
of link faults. NO NO No TDLOFD-00300401
Indicates the
duration of the
erroneous frame LOFD-00300401 /
event. NO NO No TDLOFD-00300401
Indicates the
threshold for the
erroneous frame
event. If the number
of erroneous
frames within a
second exceeds the
threshold, an
erroneous frame
event occurs. This
event is checked LOFD-00300401 /
every other second. NO NO No TDLOFD-00300401
Indicates the
duration of the Error
Frame Seconds
Summary Event. An
error frame second
refers to a second
within which one or
more error frames LOFD-00300401 /
are detected. NO NO No TDLOFD-00300401
Indicates the
threshold for the
accumulated
erroneous frame
event. If the length
of time that
erroneous frames
occupy within a
sampling period
specified through
the
ERRFRMSCDEVT
PRD parameter
exceeds the
threshold, an
accumulated
erroneous frame LOFD-00300401 /
event occurs. NO NO No TDLOFD-00300401
Indicates the Finite

State Machine
(FSM) status of an
Ethernet OAM 3AH. NO NO Yes None
Indicates the
number of
discarded OAM
PDUs on the RX
channel. NO NO Yes None
Indicates the
number of received
Event OAM PDUs. NO NO Yes None
Indicates the
number of received
Fault OAM PDUs. NO NO Yes None
Indicates the
number of Info
OAM PDUs
received on a port. NO NO Yes None
Indicates the
number of received
Loopback Control
OAM PDUs. NO NO Yes None
Indicates the total
number of received
OAM PDUs,
including the
information OAM
PDUs, event OAM
PDUs, loopback
OAM PDUs, and
discarded OAM
PDUs. NO NO Yes None
Indicates the
number of
discarded OAM
PDUs on the TX
Indicates the
number of
transmitted Event
OAM PDUs. The
Event OAM PDUs
are used to notify
the peer end of a
link event. NO NO Yes None
Indicates the
number of
transmitted Fault
OAM PDUs. The
Fault OAM PDUs
are used to notify
the peer end of a
link failure. NO NO Yes None
Indicates the
number of
transmitted Info
OAM Protocol Data
Units (PDUs). The
Info OAM PDUs are
used to finish the
search process. NO NO Yes None
Indicates the
number of
transmitted
loopback OAM
PDUs. The
loopback OAM
PDUs are used for
remote loopback
control. NO NO Yes None
Indicates the total
number of
transmitted OAM
PDUs, including the
information OAM
PDUs, event OAM
PDUs, loopback
OAM PDUs, and
discarded OAM
PDUs. NO NO Yes None
Indicates the
cabinet number of
the board where the
Ethernet port is
Indicates the
subrack number of
the board where the
Ethernet port is
Indicates the slot

number of the
board where the
Ethernet port is
Indicates the type

of sub-board on the
board where the
Ethernet port is
Indicates the
number of the
Ethernet port. YES YES No None
Indicates whether
an Ethernet port is
an electrical port or
optical port. When
the system starts,
the system binds an
Ethernet port to an
optical port
preferentially if the
default value of the
port attribute is
AUTO. If the BS
does not support
cascading, the port
attribute is set to
AUTO. NO YES No None
value of this
parameter ranges
from 46 to 1800.
For other boards,
the value of this
parameter ranges
from 46 to 1500. If
this parameter is
set to a value
greater than the
maximum allowed
value, the maximum
allowed value takes
effect. A value
greater than or
equal to 776 is
recommended,
because broadcast
packets, such as
DHCP packets,
may experience
reception or
transmission
failures if the
maximum
transmission unit is
smaller than 776. If
the Ethernet port is
added to an
Ethernet trunk, this
parameter becomes
invalid. The actual
maximum
transmission unit
depends on the
value set for the
Ethernet trunk. NO NO No None
Indicates the speed
mode of the
Ethernet port. This
parameter must be
set to the same
value as that of the
peer port. GE
electrical ports of
base board support
1000 Mbit/s only
when working in
auto-negotiation
mode. If SPEED of
a GE optical port is
set to AUTO, the
port works at 1000
Mbit/s in auto-
negotiation mode. If
SPEED of a GE
optical port is set to
1000M, the port
works at 1000
Mbit/s in manual
configuration mode. NO NO No None
Indicates the duplex

mode of the
Ethernet port. NO NO No None
Indicates whether
to enable the proxy
ARP function. If this
function is enabled,
the BS serves as
an ARP proxy for
the IP address of a
loopback interface
on the BS or a port
IP address of a
lower-level BS. If
this function is
disabled, an
external device can
access a loopback
interface in the BS
or a lower-level BS
on the same subnet
only by using a
route. After the
Ethernet port is
added to an
Ethernet trunk, this
parameter stops
taking effect and
whether the proxy
ARP function is
enabled for the
Ethernet port
depends on the
setting of the same
parameter in the
Ethernet trunk. NO NO No None
Indicates whether
to enable flow
control on the
Ethernet port. Flow
control is
implemented to
prevent congestion.
When flow control is
enabled, the RX
end repeatedly
sends PAUSE
frames to the TX
end, instructing the
TX end to lower the
TX rate if
congestion occurs
on the RX end.
Upon receiving
PAUSE frames, the
TX end stops
sending data during
a period of time to
prevent congestion.
For details, see
IEEE 802.3ah. NO NO No None
Indicates the
generation
threshold for the
MAC Excessive
Frame Error Rate
alarm (ID: 25881).
When the number
of erroneous MAC
frames exceeds this
threshold, the MAC
Excessive Frame
Error Rate alarm is
reported. NO NO No None
Indicates the
clearance threshold
for the MAC
Excessive Frame
Error Rate alarm
(ID: 25881). When
the number of
erroneous MAC
frames falls below
this threshold, the
MAC Excessive
Frame Error Rate
alarm is cleared. NO NO No None
Indicates the MAC
address (six bytes)
configured for the
Ethernet port. The
format is XXXX-
XXXX-XXXX. NO NO Yes None

of the Ethernet port. NO NO Yes None
Indicates the
loopback status of
the Ethernet port. NO NO Yes None
Indicates whether
the Ethernet port is
in the steady state
of the OAM 3AH
loopback response.
For details, see
IEEE 802.3ah. NO NO Yes None
Indicates whether
the Ethernet OAM
3AH is enabled. NO NO Yes None
Indicates the
number of packets
received at the
Ethernet port. NO NO Yes None
Indicates the
number of bytes
received at the
Indicates the
number of CRC
error packets
received at the
Indicates the traffic
received at the
Indicates the
number of packets
transmitted at the
Indicates the
number of bytes
transmitted at the
transmitted at the
Indicates the
number of IP
addresses
configured for the
Indicates the IP
address and mask
list configured for
Indicates the
negotiation mode
configured on the
negotiation mode of
Indicates the speed

mode of the
Ethernet port. This
parameter must be
set to the same
value as that of the
peer port. NO NO Yes None

mode of the
Ethernet port. If an
Ethernet electrical
port is used, this
parameter is valid
when SPEED is not
set to AUTO. If an
Ethernet optical
port is used, this
parameter must be
set to FULL. NO NO Yes None
Indicates the
negotiation mode of
the NE connecting
to the Ethernet port. NO NO Yes None
Indicates the speed

mode of the NE
connecting to the

mode of the NE
connecting to the
Indicates the
generation
threshold for the
excessive RX
broadcast packet
alarm. If the
average number of
broadcast packets
that are received on
the Ethernet port
keeps above the
threshold for 30
seconds, an
excessive RX
broadcast packet
alarm is reported. NO NO No None
Indicates the clear

threshold for the
excessive RX
broadcast packet
alarm. If the
average number of
broadcast packets
that are received on
the Ethernet port
keeps below the
threshold for 30
seconds, the
excessive RX
broadcast packet
alarm is cleared. NO NO No None
Indicates the
physical layer
status of the
Indicates the user-

defined information
about an Ethernet
port.
PeerPortLocation is
contained in the
UserLabel field.
The format of
UserLabel is
UserLabel="%Peer
PortLocation::XXXX
%ssssss", where
<i>XXXX</i>
indicates the value
of
PeerPortLocation,
and <i>ssssss</i>
indicates the value
of UserLabel. NO NO No None
Indicates the
cabinet number of
the board where the
Ethernet trunk is
established. YES NO No None
Indicates the
number of the
subrack housing
the board where the
Ethernet trunk is
Indicates the
number of the slot
housing the board
where the Ethernet
trunk is established. YES YES No None
Indicates the
number of the
Ethernet
trunk.When the
board is a UTRPc
board, the value of
this parameter
ranges from 0 to 2.
When the board is
a board other than
the UTRPc board,
the value of this
parameter ranges LOFD-003008 /
from 0 to 1. YES NO No TDLOFD-003008
Indicates the type
of Ethernet trunk.
set to DISABLE, the
trunk's status can
not be notified to
the other end,
member ports of
the Ethernet trunk
must be manually
configured. In this
case, the
configured member
ports are
considered as valid
member ports of
the Ethernet trunk.
set to ENABLE,
member ports of
the Ethernet trunk
must also be
manually
configured. In this
case, the valid
member ports of
the Ethernet trunk
are negotiated
between the BS
and the peer end LOFD-003008 /
according to LACP. NO NO No TDLOFD-003008
Indicates whether
to enable the ARP
proxy function on
the Ethernet trunk.
set to ENABLE, the
BS performs the
ARP proxy on the
IP addresses of its
loopback interfaces
(or of the lower-
level BS). If this
parameter is set to
DISABLE, the BS
does not perform
the ARP proxy on
the IP addresses of
its loopback
interfaces (or of the
lower-level BS).
The external device
on the same subnet
needs to access the
IP address through LOFD-003008 /
a configured route. NO NO No TDLOFD-003008
Indicates the type

of subboard on the
board where the
Ethernet trunk is
established. YES YES No None
the maximum
transmission unit for
an Ethernet trunk.
For the UMPT,
LMPT, and UTRPc,
the value of this
parameter ranges
from 46 to 1800.
For the WMPT,
UQEC, and UEOC,
the value of this
parameter ranges
from 46 to 1500. If
this parameter is
set to a value
greater than the
maximum allowed
value, the maximum
allowed value takes
effect. A value
greater than or
equal to 776 is
recommended,
because broadcast
packets, such as
DHCP packets,
may experience
reception or
transmission
failures if the
maximum
transmission unit is LOFD-003008 /
smaller than 776. NO NO No TDLOFD-003008

of the Ethernet
trunk. The state of
the Ethernet trunk
depends on the
state of the member
ports. If the state of
the member ports
of the existing
Ethernet trunk is
activated, the state
of the Ethernet
trunk is activated. NO NO Yes None
Indicates the MAC
address of the
Ethernet trunk. The
format is XXXX-
XXXX-XXXX. The
MAC address of an
Ethernet port is that
of the first Ethernet
port added to the
Ethernet trunk. NO NO Yes None
Indicates the MAC

address of the
Ethernet trunk at
the peer end. The
format is XXXX-
XXXX-XXXX. If the
Ethernet trunk type
is set to ENABLE,
this parameter
specifies the MAC
address of the peer
end, which is
negotiated between
the BS and the peer
end by using the
LACP protocol. For
details, see IEEE
802.3ad. NO NO Yes None
Indicates the
number of member
ports in the
Indicates the
number of the
member port of the
Indicates the
number of active
member ports of
the Ethernet trunk. NO NO Yes None
Indicates the
number of an active
member port of the
Indicates the
number of packets
(including the
discarded packets)
received by the
Indicates the
number of bytes
(including the
discarded bytes)
received by the
Indicates the
number of
discarded packets
received by the
Indicates the
number of
discarded bytes
received by the
Indicates the
number of packets
(including the
discarded packets)
transmitted by the
Indicates the
number of bytes
(including the
discarded bytes)
transmitted by the
Indicates the
number of
discarded packets
transmitted by the
Indicates the
number of
discarded bytes
transmitted by the
Indicates the
number of IP
addresses
configured for the
Indicates the IP
address list of the
Indicates the
number of the
cabinet housing the
board where the
member port of an
Ethernet trunk is
Indicates the
number of the
subrack housing
the board where the
member port of an
Ethernet trunk is
Indicates the
number of the slot
housing the board
where the member
port of an Ethernet
trunk is located. YES YES No None
Indicates the
number of the
parent Ethernet LOFD-003008 /
trunk of the port. YES NO No TDLOFD-003008
Indicates the
number of the
member port in an LOFD-003008 /
Ethernet trunk. YES YES No TDLOFD-003008
Indicates the
priority of the
member port in an
Ethernet trunk. A
smaller parameter
value indicates a LOFD-003008 /
higher priority. NO NO No TDLOFD-003008
Indicates whether
the member port is
the primary port of
an Ethernet trunk.
Each Ethernet trunk
has one and only
one primary port.
The primary port
must be the first
port added to an
Ethernet trunk and
the last port
removed from the LOFD-003008 /
Ethernet trunk. NO YES No TDLOFD-003008
Indicates the type
of sub-board on the
board where the
member port of an
Ethernet trunk is
of the member port
in an Ethernet
trunk. NO NO Yes None
Indicates the MAC

address of the
member port when
being added to an
Ethernet trunk. The
format of the MAC
address is XXXX-
XXXX-XXXX. NO NO Yes None
Indicates the period

mode of
transmitting the
LACP Protocol Data
Units (PDUs) at the
local end. In long
period mode, the
time interval for
periodically
transmitting the
LACP PDUs is
large. NO NO Yes None
mode of
transmitting the
LACP PDUs at the
peer end. NO NO Yes None
Indicates the
number of received
LACP PDUs on the
member port of an
Indicates the
number of
transmitted LACP
PDUs on the
member port of an
Indicates the type
of the flood packet LOFD-003014 /
to be measured. YES YES No TDLOFD-003014
Indicates whether
to enable the
protection against
excessive flood LOFD-003014 /
packets. NO NO No TDLOFD-003014
Indicates the
threshold for
starting the
protection against
excessive flood
packets. If the
DFDSW parameter
is set to ENABLE,
the system discards
the extra packets
when the RX rate of
flood packets
exceeds the
threshold. It is
recommended that
the difference
between Defend
Threshold and
Alarm Threshold is
greater than 3% of LOFD-003014 /
Defend Threshold. NO YES No TDLOFD-003014
Indicates whether
to report an alarm
when the local end
receives excessive
flood packets from LOFD-003014 /
the peer end. NO NO No TDLOFD-003014
Indicates the
threshold for the
excessive flood
packet alarm. If the
ALMSW parameter
is set to ENABLE,
the system
measures the RX
rate of flood
packets every 10
seconds. If the
measured value
exceeds the
threshold, an
excessive flood
packet alarm is
reported. The alarm
is cleared if the RX
rate of flood
packets keeps
below the threshold
for five consecutive
minutes. It is
recommended that
the difference
between Defend
Threshold and
Alarm Threshold is
greater than 3% of LOFD-003014 /
Defend Threshold. NO YES No TDLOFD-003014
Indicates the
number of packets
discarded because
the total number of
flood packets
exceeds the
specified threshold. NO NO Yes None
Indicates the total
number of received
attack packets. NO NO Yes None
RATECFGTYPE
(the rate
configuration type)
is set to
DUAL_RATE,
different values of
this parameter lead
to different CIR
allocation methods
as follows: (1) If the
sum of CIRs of the
associated
resource groups
exceeds the
bandwidth of the
physical port, each
resource group is
allocated a CIR that
is directly
proportional to its
configured CIR; (2)
If the sum of CIRs
of the associated
resource groups is
smaller than the
bandwidth of the
physical port, each
resource group is
allocated a non-CIR
that is directly
proportional to its
scheduling weight.
In this case, the
PIR of a resource
group is the sum of
the CIR and the LOFD-00301101 /
non-CIR. NO NO No TDLOFD-00301101
configuration mode
of transmission
resource groups in
the BS, which can
be set to
SINGLE_RATE or
DUAL_RATE. The
dual rate
configuration refers
to the hybrid of the
peak information
rate (PIR) and
committed
information rate
(CIR). If this
parameter is set to
SINGLE_RATE, the
transmission
resource group
performs traffic
shaping based on
its transmit
bandwidth. If this
parameter is set to
DUAL_RATE, the
transmission
resource group
performs traffic
shaping based on
PIR and the
transmission
admission algorithm
ensures that the
non-flow-
controllable traffic
does not exceed LOFD-003011 /
CIR. NO NO No TDLOFD-003011
during which the
active and standby
routes are switched
over twice. This
period indicates the
interval between
the time single-hop
BFD detects that an
active route
changes from
DOWN to UP and
the time the active
route becomes
available. During
the switchover, if
the previous
standby route
becomes faulty, the
system waits for 10
seconds and then
switches back to LOFD-003011 /
the active route. NO NO No TDLOFD-003011
Indicates the aging

time of a dynamic
ARP item of the
BS.This parameter
does not change
the ARP aging time
of the local
maintenance
Ethernet port. NO NO No None
Indicates the mode

of the ping filtering.
When the whitelist
is used, only the
network segments
or hosts specified
by the ping filter
can ping the NE.
When the blacklist
is used, the network
segments or hosts
specified by the
ping filter cannot
ping the NE. NO NO No None
Indicates the
number of packets
discarded due to
fragmentation
failures on the
transmitter. NO NO Yes None
Indicates the
number of received
packets that have
been encrypted. NO NO Yes None
Indicates the
number of packets
that have been
successfully
decrypted at the
receiver. NO NO Yes None
Indicates the
number of received
packets that fail the
ESP-based
decryption. NO NO Yes None
Indicates the
number of received
packets that fail the
AH-based
Indicates the
number of received
packets that should
not have been
encrypted. NO NO Yes None
Indicates the total

number of packets
received by the
decryption module
of the receiver at
the IP layer. NO NO Yes None
Indicates the total
number of packets
that fail decryption
at the IP layer of
the receiver. NO NO Yes None
Indicates the
number of received
IKE packets. NO NO Yes None
Indicates the
number of
encrypted packets
received by the IP
layer of the receiver
from invalid IP
addresses. NO NO Yes None
Indicates the total
number of packets
discarded at the IP
due to replay
attacks. NO NO Yes None
Indicates the total

number of packets
discarded at the IP
due to a lack of
inbound SA. NO NO Yes None
Indicates the total

number of packets
discarded because
the IP layer of the
receiver does not
support the AH
algorithm. NO NO Yes None
Indicates the total

number of packets
discarded because
the IP layer of the
receiver does not
support the ESP
Indicates the total
number of plain
packets received at
the IP layer of the
Indicates the
number of packets
received at the IP
layer that comply
with ACL rules and
should have been
Indicates the
number of
transmitted packets
that are
successfully
Indicates the
number of packets
that fail to be
encrypted at the
Indicates the total

number of received
Indicates the
number of packets
that need to be
encrypted at the
Indicates the
number of packets
discarded at the
transmitter because
the outbound SAs
do not exist. NO NO Yes None
Indicates the
number of packets
discarded because
the transmitter does
not support the AH
Indicates the
number of packets
discarded because
the transmitter does
not support the
ESP algorithm. NO NO Yes None
Indicates the
number of packets
that fail the AH-
based
authentication at
the transmitter. NO NO Yes None
Indicates the
number of
transmitted packets
that fail ESP
encryption. NO NO Yes None
Indicates the
number of packets
discarded due to
transmitting
sequence number
overflow. NO NO Yes None
Indicates the
number of packets
that do not need to
be encrypted at the
Indicates the
number of
transmitted IKE
Indicates the type
of Ethernet
OAM.The current
Ethernet OAM type LOFD-00300402 /
includes IEEE TDLOFD-00300402
802.1ag or ITU-T LOFD-00300403 /
Y.1731 ETHOAM. NO NO No TDLOFD-00300403
Indicates the ITU-T

Y.1731 monitoring
policy.The monitor
policy includes the
following values:
PORTID_VLANID
(based on PortID
and VLANID),
PORTID_VLANID_
VLANPRI (based
on PortID, VLANID,
and VLAN PRI),
SA_DA_VLANID
(based on PortID,
source MAC
address,
destination MAC
address, and
VLANID),
SA_DA_VLANID_V
LANPRI (based on
PortID, source MAC
address,
destination MAC
address, VLANID,
and VLAN PRI),
and SA_DA (based
on PortID, source
MAC address, and
destination MAC LOFD-00300403 /
address). NO NO No TDLOFD-00300403
Indicates whether
to enable the
switchover of IPSec
Bypass. If this
parameter is set to
DISABLE, the base
station cannot
switch between an
IPSec network and
a non-IPSec
network. NO NO No None
Indicates the
password used for
switching the base
station between an
IPSec network and
a non-IPSec
network. NO YES No None
Indicates the state

of IPSec Bypass. NO NO No None
Indicates the IP
address of the
active security
gateway when the
base station is
located in an IPSec
network. NO NO Yes None
Indicates the IP
address of the
standby security
gateway when the
base station is
located in an IPSec
network. NO NO Yes None
UDPSESSION
detection. Currently,
only GSM supports
the UDP session
detection. If the
parameter is set to
ENABLE, the OM
channel switches
over to the active
remote
maintenance
channel after the
active/standby
remote
maintenance
channel is switched
and the
UDPSESSION
detects that the
active channel is
recovered. If the
parameter is set to
DISABLE, the OM
channel does not
switch to the active
remote
maintenance
channel after the
active/standby
remote
maintenance
channel is switched
and the
UDPSESSION
detects that the
active channel is
recovered. NO NO No None
Indicates the
duration for the
detection switching
from the standby
remote
maintenance
channel to the
active remote
maintenance
channel. NO NO No None
Indicates whether
to report ALM-
25888 SCTP Link
Fault in real time.
When this
parameter is set to
ENABLE, ALM-
25888 SCTP Link
Fault is reported
immediately after
an SCTP link
disconnection is
detected. When this
parameter is set to
DISABLE, a timer
starts after an
SCTP link
disconnection is
detected. ALM-
25888 SCTP Link
Fault alarm is
reported if the
disconnection lasts
for 18 consecutive
seconds within 30s.
Otherwise, this
alarm is not
Indicates the
cabinet number of
the boards that
constitute the HA
group. This
parameter can only
be configured
through CME. YES NO No None
Indicates the
subrack number of
the boards that
constitute the HA
group. This
parameter can only
be configured
Indicates the logical
slot number of the
HA group. The
logical slot number
of an HA group is
the number of the
physical slot
housing one of the
two boards
constituting the HA
group. This
parameter can only
be configured
Indicates the IKE LOFD-003009 /

local name. NO NO No TDLOFD-003009
Indicates the time

interval for sending
the keepalive
packets. If the
parameter is set to
0, keepalive
packets are not LOFD-003009 /
sent. NO NO No TDLOFD-003009
Indicates the
timeout duration for
waiting for the
keepalive packets.
set to 0, keepalive
packets are not LOFD-003009 /
Indicates the DSCP

for IKE negotiation LOFD-003009 /
packets. NO NO No TDLOFD-003009
Indicates the
cabinet number of
the IKE local board. NO NO Yes None
Indicates the
subrack number of
the IKE local board. NO NO Yes None
Indicates the slot
number of the IKE
local board. NO NO Yes None
of the IKE peer. YES YES No TDLOFD-003009
Indicates the ID of
the IKE proposal in LOFD-003009 /
use. NO YES No TDLOFD-003009

protocol version. NO NO No TDLOFD-003009
Indicates the IKE

exchange mode. In
main mode, keys
are exchanged
independently from
identity
authentications.
This protects
identity information
and hence
enhances security.
The aggressive
mode does not
have identity
authentication LOFD-003009 /
protection. NO NO No TDLOFD-003009
Indicates the type

of the identification
payload that the
local end transmits.
The authentication
can be performed
based on IP or fully
qualified domain LOFD-003009 /
name (FQDN). NO YES No TDLOFD-003009
Indicates the IP
address of the peer LOFD-003009 /
end. NO YES No TDLOFD-003009

of the peer end. NO NO No TDLOFD-003009
Indicates the pre-

shared key. The two
negotiation ends
must be configured
with the same
authenticator. This
parameter takes
effect only when
Authentication
Method in the
corresponding
IKEPROPOSAL is
set to
PRE_SHARED_KE LOFD-003009 /
Y. NO NO No TDLOFD-003009
Indicates whether
to enable the dead
peer detection LOFD-003009 /
(DPD) function. NO NO No TDLOFD-003009
Indicates the DPD

idle time. If the local
end does not
receive encrypted
packets for a time
defined by this
parameter, it sends
a DPD packet to
perform dead peer
detection. The
a DPD packet
slightly varies in
various network LOFD-003009 /
environments. NO NO No TDLOFD-003009
Indicates the
interval at which
DPD detection
frames are sent.
The interval at
which DPD
detection frames
are sent may
slightly vary in
various network
environments such
as network
congestion, delay, LOFD-003009 /
and jitter. NO NO No TDLOFD-003009
Indicates the
number of
retransmission
attempts after a LOFD-003009 /
DPD detection fails. NO NO No TDLOFD-003009
Indicates whether
the object can be
modified or deleted
by the system. The
value
MANUAL_MODE
means that only the
user can modify or
delete the object.
The value
AUTO_MODE
means that both the
system and the
user can modify or
Indicates the IP
address of the local
end, which is used
in IKE negotiation.
This IP address can
be set to 0.0.0.0 or
a configured
interface IP address
at the local end. If
this parameter is
set to 0.0.0.0, the
BS automatically
uses the interface
IP address to
negotiate with the
peer. If multiple IP
addresses are
configured at the
port, it is
recommended that
you specify one IP
address for the
negotiation. If the
local BS uses the
digital certificate
and IP address for
authentication in
the negotiation,
ensure that the IP
address in the
certificate is the
same as the local
IP address of the LOFD-003009 /
BS. NO NO No TDLOFD-003009
Indicates the
cabinet number of
the IKE peer board. NO NO Yes None
Indicates the
subrack number of
the IKE peer board. NO NO Yes None
Indicates the slot
number of the IKE
peer board. NO NO Yes None
Indicates whether
the object is
created by the
system.
MANUAL_CREATE
D means that the
by the user
manually.
AUTO_CREATED
means that the
LBFD-003006 /
Indicates the name TDLBFD-003006
of the IPv6 IKE LOFD-003024 /
peer. YES YES No TDLOFD-003024
Indicates the ID of
the security LBFD-003006 /
proposal used by TDLBFD-003006
an IPv6 IKE LOFD-003024 /
negotiation. NO YES No TDLOFD-003024
LBFD-003006 /
Indicates the TDLBFD-003006
protocol version of LOFD-003024 /
the IPv6 IKE. NO NO No TDLOFD-003024
Indicates the IPv6

IKE negotiation
mode. In main
mode, keys are
exchanged
independently from
identity
authentications.
This protects
and hence
enhances security.
The aggressive
mode does not
have identity
authentication
protection. This
mode, however,
meets the LBFD-003006 /
requirements in TDLBFD-003006
specific network LOFD-003024 /
environments. NO NO No TDLOFD-003024
Indicates the type
of the identification
payload that the
local end transmits
in IPv6 networks.
The authentication
can be performed
based on IPv6 LBFD-003006 /
address or fully TDLBFD-003006
qualified domain LOFD-003024 /
name (FQDN). NO YES No TDLOFD-003024
LBFD-003006 /
Indicates the IPv6 TDLBFD-003006
address of the peer LOFD-003024 /
end. NO YES No TDLOFD-003024
Indicates the peer LBFD-003006 /

name used by an TDLBFD-003006
IPv6 IKE LOFD-003024 /
negotiation. NO NO No TDLOFD-003024
Indicates the
authenticator of the
pre-shared key in
IPv6 networks. The
two negotiation LBFD-003006 /
ends must be TDLBFD-003006
configured with the LOFD-003024 /
same authenticator. NO NO No TDLOFD-003024
Indicates whether
to enable the Dead LBFD-003006 /
Peer Detection TDLBFD-003006
(DPD) function in LOFD-003024 /
IPv6 networks. NO NO No TDLOFD-003024
Indicates the IPv6
DPD idle time. If the
local end does not
receive encrypted
packets for a period
specified by this
parameter, it sends
a DPD packet to
perform dead peer
detection. Time
required to transmit LBFD-003006 /
DPD packets varies TDLBFD-003006
with network LOFD-003024 /
conditions. NO NO No TDLOFD-003024
Indicates the
the IPv6 DPD
detection frame.
The interval at
which IPv6 DPD
detection frames
are sent may
slightly vary in
various network
environments such LBFD-003006 /
as network TDLBFD-003006
congestion, delay, LOFD-003024 /
and jitter. NO NO No TDLOFD-003024
Indicates the
number of
retransmission LBFD-003006 /
attempts after the TDLBFD-003006
IPv6 DPD detection LOFD-003024 /
fails. NO NO No TDLOFD-003024
Indicates whether
the object can be
modified or deleted
by the system. The
value
MANUAL_MODE
means that only the
user can modify or
delete the object.
The value
AUTO_MODE
means that both the
system and the
user can modify or
Indicates the IPv6
address that is
used by the local
end in IPv6 IKE
negotiation. This IP
address can be set
to either
0:0:0:0:0:0:0:0 or a
device IPv6
address configured
at the local end. If
this parameter is
set to
0:0:0:0:0:0:0:0, the
BS automatically
uses a local
interface IP address
to negotiate with
the peer end. If
multiple interface
IPv6 addresses are
configured for a
port, it is
recommended that LBFD-003006 /
this parameter be TDLBFD-003006
set to one of the IP LOFD-003024 /
addresses. NO NO No TDLOFD-003024
Indicates the
cabinet number of
the IPv6 IKE peer
board. NO NO Yes None
Indicates the
subrack number of
the IPv6 IKE peer
Indicates the slot
number of the IPv6
IKE peer board. NO NO Yes None
Indicates whether
the object is
created by the
system.
MANUAL_CREATE
D means that the
by the user
manually.
AUTO_CREATED
means that the
the IKE proposal. YES YES No TDLOFD-003009
Indicates the
encryption
algorithm used in
the IKE proposal.
The Data
Encryption
Standard (DES) is
an internationally
used data
encryption
algorithm, which
uses a 56-bit key.
The 3DES is also
an internationally
used encryption
algorithm, which
uses a 168-bit key.
The Advanced
Encryption
Standard (AES) is
an advanced
encryption
algorithm, which
provides three
types of key of
different lengths:
128, 192, and 256
bits. Thus, different
protection levels
are available. For
details, see LOFD-003009 /
RFC2401. NO NO No TDLOFD-003009
algorithm used in
the IKE proposal.
IKE uses hashed
message
authentication code
(HMAC) or cipher
block chaining
(CBC) for identity
authentication and
data integrity check.
For details about
HMAC, see
RFC4306. HMAC
currently supports
two hash functions:
message digest
algorithm 5 (MD5)
and secure hash
algorithm 1 (SHA1).
For details about
the hash functions,
see RFC2409. MD5
and SHA1 verify
data by means of
integrity protection.
SHA1 provides
higher security level
than MD5. CBC
currently supports
AES-XCBC- 96,
which is an
enhancement to
CBC and applies
only to IKEv2. For
details about AES-
XCBC-96, see LOFD-003009 /
Indicates the
authentication
mode used in the
IKE proposal. For
Indicates the Diffie-
Hellman (DH) group
of the IKE proposal.
The core
technology used in
an IKE proposal is
the Diffie-Hellman
(DH) exchange
technology. The DH
exchange
technology is used
to calculate private
information based
on public
information. It is
mathematically
proven that
decrypting the DH
information is
impractical due to
calculation LOFD-003009 /
complexity. NO NO No TDLOFD-003009
Indicates the life
cycle of an ISAKMP
SA. ISAKMP refers
to Internet Security
Association and
Key Management
Protocol, and SA
refers to security
association.
IKE negotiation
requires a long time
to calculate Diffie-
Hellman (DH) keys.
It is recommended
that this parameter
be set to greater
than 10 minutes so
that the update of
the ISAKMP SA
does not affect the
secure
communication.
Before the SA life
cycle elapses, local
and peer ends will
negotiate with each
other to generate a
new SA to replace
the original one.
The new SA is used
upon completion of
the negotiation, and
the original SA is
automatically
removed once its LOFD-003009 /
life cycle elapses. NO NO No TDLOFD-003009
Indicates the
Pseudo-random
Function (PRF)
algorithm used in
IKEv2. The PRF
algorithm is used to
generate the
materials required
for IKE
authentication and
encryption. For
details about how to
generate materials, LOFD-003009 /
see RFC4306. NO NO No TDLOFD-003009
Indicates the
cabinet number of
the board that
adopts the IKE
security proposal. NO NO Yes None
Indicates the
subrack number of
the board that
adopts the IKE
security proposal. NO NO Yes None
Indicates the slot
number of the
board that adopts
the IKE security
proposal. NO NO Yes None
Indicates the
mapping between
IP and Transport
Resource Groups. YES YES No None
Indicates the
number of the
cabinet housing the
board where a
transmission
resource group is
established. NO NO No None
Indicates the
number of the
subrack that
houses the board
where a
transmission
resource group is
established. NO NO No None
Indicates the
number of the slot
corresponding to
the board where a
transmission
resource group is
established. NO YES No None
Indicates the bearer MRFD-231501
type of transmission LOFD-003002 /
resource group. NO NO No TDLOFD-003002
Indicates the type

of sub-board on the
board where a
transmission
resource group is
established. NO YES No None
Indicates the type

of port where a
transmission
resource group is
carried. NO YES No None
Indicates the
number of the port
where the
transmission
resource group is
configured. NO NO No None
Indicates the ID of a MRFD-231501

Indicates the index

of a VRF instance.
The NodeB
currently supports
default routes
domain only (the
Indicates the
destination IP
address of the
service flow that is
bound to a MRFD-231501
resource group. NO YES No TDLOFD-003002
Indicates the
subnet mask of the
destination IP
address of the
service traffic bound MRFD-231501
to a transmission LOFD-003002 /
resource group. NO YES No TDLOFD-003002
Indicates the
cabinet number of
the board where the
transmission
resource group is
Indicates the
subrack number of
the board where the
transmission
resource group is
Indicates the slot

number of the
board where the
transmission
resource group is
Indicates the
subboard type of
the board where the
transmission
resource group is
Indicates the type

of the port where a
transmission
resource group is
Indicates the
number of the port
where the
transmission
resource group is
Indicates the
bearing type of a MRFD-231501
transmission LBFD-003006 /
resource group. YES NO No TDLBFD-003006
Indicates the ID of a MRFD-231501

transmission LBFD-003006 /
resource group. YES NO No TDLBFD-003006
Indicates the MRFD-231501

destination IPv6 LBFD-003006 /
Indicates the prefix MRFD-231501

length of an IPv6 LBFD-003006 /
Indicates whether
to perform ARP
spoofing checks. If
this parameter is
set to ENABLE, an
alarm is reported
when ARP spoofing
attacks occur. If this
parameter is set to
DISABLE, no alarm
is reported when
ARP spoofing LOFD-003014 /
attacks occur. NO NO No TDLOFD-003014
Indicates the ARP

spoofing alarm
threshold. When
the ARP spoofing
check switch is
turned on, an ARP
spoofing alarm is
reported if the
number of ARP
update attempts
reaches this
threshold within one
minute. Note that
the number of ARP
update attempts
from trusted MAC
addresses is not
counted. This alarm
is cleared if no ARP
update attempt is
made in one minute
after the ARP
spoofing alarm is LOFD-003014 /
reported. NO NO No TDLOFD-003014
Indicates whether
to enable APR
learning strict. ARP
learning strict is a
function that
enables a BS to
learn the
acknowledgement
packets in response
to only ARP request
packets sent by
itself. With ARP
learning strict, the
BS can reject most
ARP request and
acknowledge LOFD-003014 /
packet attacks. NO NO No TDLOFD-003014
Indicates whether
to report an alarm
when the number of
invalid packets
received by a BS
exceeds the
specified threshold.
set to ENABLE, an
alarm is reported
when the number of
invalid packets
received by a BS
exceeds the
set to DISABLE, no
alarm is reported
when the number of
invalid packets
received by a BS
exceeds the
Invalid packets are
those filtered
according to the LOFD-003014 /
packet filter criteria. NO NO No TDLOFD-003014
Indicates the
threshold for the
excessive invalid
packet alarm. When
Invalid Packet
Check Switch is set
to ENABLE, the
system measures
the RX rate of
invalid packets
every 10 seconds.
If the measured
value exceeds this
threshold, an
excessive invalid
packet alarm is
reported. The alarm
is cleared if the RX
rate of invalid
packets keeps
below the threshold
for 5 consecutive LOFD-003014 /
minutes. NO NO No TDLOFD-003014
Indicates whether
to report IPSec
packet replay LOFD-003014 /
alarm. NO NO No TDLOFD-003014
Indicates the IPSec
anti-replay alarm LOFD-003014 /
threshold. NO NO No TDLOFD-003014
Indicates the type

of physical port. NO NO Yes None
Indicates the
number
Indicatesofthe
a port. NO NO Yes None
source MAC
address of an
invalid packet. NO NO Yes None
Indicates the
destination MAC
address of an
Indicates the VLAN
ID of an invalid
packet. NO NO Yes None
Indicates the type

of MAC-layer
protocol used by an
invalid packet. A BS
interprets only the
supported MAC-
layer protocols and
only displays the
protocol numbers of
other MAC-layer
protocols. NO NO Yes None
Indicates the index

of a VRF instance.
The NodeB
currently supports
default routes
domain only (the
VRF index is 0). NO NO Yes None
Indicates the
source IP address
of an invalid packet. NO NO Yes None
Indicates the
destination IP
address of an
Indicates the
protocol used at the
IP layer of an
invalid packet. A BS
interprets only the
supported IP-layer
protocols and only
displays the
protocol numbers of
other IP-layer
protocols. NO NO Yes None
Indicates the
source port number
of an invalid packet. NO NO Yes None
Indicates the
destination port
number of an
Indicates at most
the first 64 bytes of
an invalid packet. NO NO Yes None
Indicates the index

of the IPv6 LBFD-003006 /
interface. YES YES No TDLBFD-003006
Indicates the type
of the IPv6
interface, which can
be set to NORMAL LBFD-003006 /
or VLAN. NO NO No TDLBFD-003006
Indicates the
number of the
cabinet housing the
board where the
IPv6 interface is
located. NO NO No None
Indicates the
subrack number of
the board where the
IPv6 interface is
Indicates the slot
number of the
board where the
IPv6 interface is
located. NO YES No None
Indicates the type
of sub-board on the
board where the
IPv6 interface is
Indicates the port
type of IPv6 LBFD-003006 /
interface. NO YES No TDLBFD-003006
Indicates the port

number of the IPv6 LBFD-003006 /
Indicates the ID of
the VLAN-type IPv6 LBFD-003006 /
Indicates the
maximum
transmission unit of LBFD-003006 /
the IPv6 interface. NO NO No TDLBFD-003006
Indicates whether
an IPv6 interface is
already activated. NO NO Yes None
Indicates the valid
link-local address of
an IPv6 interface. NO NO Yes None
Indicates the
number of valid
global unicast
addresses of an
IPv6 interface. NO NO Yes None
valid global unicast
addresses of an
Indicates the
number of valid
multicast addresses
of an IPv6 interface. NO NO Yes None
valid multicast
addresses of an
Indicates whether
to enable the IPv6
interface to detect
address conflicts
during neighbor
discovery. NO NO Yes None
Indicates the
number of detection
times during the
neighbor discovery
procedure of the
Indicates the time
for the IPv6
interface to start a
neighbor discovery
procedure. NO NO Yes None
Indicates the
interval between
the time the IPv6
interface reinitiates
neighbor discovery
and the time
neighbor discovery
fails or the ND table
entry becomes
invalid. NO NO Yes None
Indicates whether
to enable the IPv6
interface to
automatically
generate a link local
Indicates the
stateless automatic
configuration switch
of the IPv6
interface. NO NO Yes None
Indicates the ID of
an IP path. YES YES No None
Indicates the
cabinet number of
the board where the
IP path is located. NO NO No None
Indicates the
subrack number of
the board where the
IP path is located. NO NO No None
Indicates the slot
number of the
board where the IP
path is located. NO YES No None
Indicates the
physical port type of
the IP path. NO YES No None
Indicates the
number of the port
where the IP path is
Indicates the type

of the IP path.
FIXED indicates
that this IP path is
used to carry the
service with
specified Quality of
Service (QoS), that
is, with a specified
DSCP. ANY
indicates that this IP
Path can be used to
carry services of
any QoS and hence
is used to carry the
service without a
specified DSCP. NO NO No None
Indicates the
differentiated
services code point
(DSCP) of the
services carried on
an IP path. NO YES No None
Indicates the local

IP address of an IP
path. The value
0.0.0.0 indicates
that the local IP
address needs to
be negotiated. NO YES No None
Indicates the peer

IP address of the IP
path. NO YES No None
Indicates the type

of transport
resource for the IP
path. The value HQ
indicates high-
quality transport
resources, and the
value LQ indicates
low-quality transport
resources. This
parameter must be
set in the
hybridtransmission
scenario. In other
scenarios, the
default value of this
parameter is
used.The
parameter takes
effect only in LTE. NO NO No None
Indicates whether
to use the PING
detection to check
an IP path.
Generally used to
detect the
connectivity of the
IP path, the PING
detection will fail if
the firewall disables
the PING
function.This
parameter will be
removed from later
versions. In this
version, however,
the setting of the
parameter will be
synchronized to the
M2000 from the BS
or delivered to the
BS from the M2000.
Note that this
parameter is no
longer used
internally.
Therefore, it is
recommended that
this parameter not
be used. NO NO No None
Indicates whether
the IPMUX function
is enabled on IP
paths. The eNodeB
currently does not
support this
function. NO NO No None

of the IPMUX timer,
which defines the
maximum buffer
time for IPMUX
packets. The
eNodeB currently
does not support
the IPMUX function. NO NO No None
Indicates the
maximum
multiframe length of
IPMUX. The
eNodeB currently
does not support
the IPMUX function. NO NO No None
Indicates the
maximum subframe
length of IPMUX.
The eNodeB
currently does not
support the IPMUX

real-time traffic
transmitted on the
IP path.The
parameter takes
effect only in LTE. NO NO Yes None

real-time traffic
received on the IP
path.The parameter
takes effect only in
LTE. NO NO Yes None

non-real-time traffic
transmitted on the
IP path.The
parameter takes

received on the IP
path.The parameter
LTE. NO NO Yes None
TX bandwidth
reserved for the
non-real-time
service transmitted
on the IP path.The
parameter takes

RX bandwidth
reserved for the
non-real-time
service received on
the IP path.The
parameter takes
Indicates the check

result for the GTP-U
static detection of
an IP path.The
parameter takes
Indicates the ID of
the transmission
resource group
established on an
IP path. NO NO No None
Indicates the
description about
the peer of the IP
path. NO NO No None
Indicates the type

of sub-board on the
board where the IP
path is established. NO YES No None
Indicates the index
of a VRF instance.
The NodeB
currently supports
default routes
domain only (the
Indicates whether
the IP path joins a
transmission
resource group. If
this parameter is
set to DISABLE, the
IP path is
established on the
default transmission
resource group on
a specific physical
port. NO NO No None
total traffic received
on the IP path. NO NO Yes None
total traffic
transmitted on the
IP path. NO NO Yes None
Indicates the ID of LBFD-003006 /

an IPv6 path, which TDLBFD-003006
identifies a unique LOFD-003017 /
IPv6 path. YES YES No TDLOFD-003017
Indicates whether LBFD-003006 /
the IPv6 path joins TDLBFD-003006
a transmission LOFD-003017 /
Indicates the ID of
the transmission LBFD-003006 /
resource group to TDLBFD-003006
which an IPv6 path LOFD-003017 /
is added. NO YES No TDLOFD-003017
Indicates the index LBFD-003006 /
of the IPv6 interface TDLBFD-003006
used by an IPv6 LOFD-003017 /
path. NO YES No TDLOFD-003017
Indicates the type
of IPv6 path. The
value FIXED
indicates that the
current IPv6 path
only carries
services of a fixed
QoS. The value
ANY indicates that
the current IPv6 LBFD-003006 /
path can carry TDLBFD-003006
services of any LOFD-003017 /
QoS. NO YES No TDLOFD-003017
Indicates the
Differentiated
Services Code
Point (DSCP) of LBFD-003006 /
services allowed to TDLBFD-003006
be carried on an LOFD-003017 /
IPv6 path. NO YES No TDLOFD-003017
Indicates the local

IPv6 address of an
IPv6 path. This IPv6 LBFD-003006 /
address must be a TDLBFD-003006
global unicast LOFD-003017 /
address. NO YES No TDLOFD-003017
Indicates the peer

IPv6 address of an
IPv6 path. This IPv6 LBFD-003006 /
global unicast LOFD-003017 /
address. NO YES No TDLOFD-003017
Indicates whether
to enable ping
detection for an
IPv6 path. Ping
detection can be
used to check the
connectivity of an
IPv6 path.This
parameter will be
removed in later
versions.In this
version, however,
the setting of the
parameter will be
synchronized to the
M2000 from the BS
or delivered to the
BS from the M2000.
Note that this
parameter is no
longer used
internally.
Therefore, it is
recommended that
this parameter not
be used. NO NO No None
real-time services
transmitted on an
IPv6 path. NO NO Yes None
real-time services
received on an IPv6
path. NO NO Yes None
non-real-time
services transmitted
on an IPv6 path. NO NO Yes None
non-real-time
services received
on an IPv6 path. NO NO Yes None
Indicates the TX
bandwidth reserved
for non-real-time
services on an IPv6
Indicates the RX
bandwidth reserved
for non-real-time
services on an IPv6
Indicates the LBFD-003006 /
description about TDLBFD-003006
the peer of the IPv6 LOFD-003017 /
path. NO NO No TDLOFD-003017
Indicates the index

Indicates the
source IP address
of an IP path route.
The source IP
address must be
the same as the
configured device LOFD-003016 /
IP address. YES YES No TDLOFD-003016
Indicates the
destination IP
address of an IP LOFD-003016 /
path route. YES YES No TDLOFD-003016
Indicates the type
of transport
resource carried on
an IP path route.
The value HQ
indicates high-
quality transport
resources, and the
value LQ indicates
low-quality transport LOFD-003016 /
resources. NO YES No TDLOFD-003016
Indicates the next

hop IP address of
an IP path route.
The next hop IP
address and the
configured device
IP address must be
on the same
network segment,
but cannot be the LOFD-003016 /
same. NO YES No TDLOFD-003016
Indicates the ID of
an IP PM session of LOFD-00301201 /
an NE. YES YES No TDLOFD-00301201
Indicates the local

IP address of an IP
PM session. This IP
address excluding
0.0.0.0 must be
configured at the
Ethernet port,
Ethernet trunk, or LOFD-00301201 /
loopback interface. NO YES No TDLOFD-00301201
Indicates the peer

IP address of the IP
PM session. This IP
address must be a
valid IP address of
Class A, B, or C
and different from
any existing IP
end. In addition, it
cannot be set to LOFD-00301201 /
0.x.x.x or 127.x.x.x. NO YES No TDLOFD-00301201
Indicates the
Differentiated
Services Code
Point (DSCP) of an LOFD-00301201 /
IP PM session. NO YES No TDLOFD-00301201
Indicates that the
activation direction
of the IP PM
session. For this
parameter to be
valid, the peer must
also support the IP
PM session. If this
parameter is set to
UP, the IP PM
session initiated by
the BS is activated.
set to BIDIR, the IP
PM sessions
initiated by BS and
the peer are
activated. Before
configuring IP PM
bidirectionally
activated IP PM
sessions, ensure
that the peer device
supports IP PM
bidirectionally
activated IP PM
sessions. The
WMPT or UTRP
does not support
BIDIR. The
activation direction
is specified by the LOFD-00301201 /
DIR parameter. NO NO No TDLOFD-00301201
Indicates the round-

trip delay calculated
by an IP PM
session detection.
The round-trip
delay is the time
that is consumed to
transmit IP PM
detection packets to
and fro between the
local and peer
ends. NO NO Yes None
Indicates the DL
jitter calculated by
an IP PM session
detection. NO NO Yes None
Indicates the UL
jitter calculated by
an IP PM session
Indicates the DL
packet loss rate
calculated by an IP
PM session
Indicates the UL
packet loss rate
calculated by an IP
PM session
Indicates the UL
activation status of
an IP PM session. NO NO Yes None
Indicates the DL
an IP PM session. NO NO Yes None
Indicates the type

of IP PM session. A
triplet consists of
the local IP
address, peer IP
address, and
protocol type; a
quadbit consists of
the local IP
address, peer IP
address, protocol LOFD-00301201 /
type, and DSCP. NO NO No TDLOFD-00301201
Indicates whether
to bind the IP PM
session to an IP
path. If the IP PM
session is bound to
an IP path, the IP
PM session uses
the local and peer
IP addresses of the
IP path in data
transmission. In
addition, if
TXBWASW or
RXBWASW is set
to ON and TCSW is
set to ENABLE in
the algorithm for the
transmission
resource group
associated with the
IP path, the system
dynamically adjusts
the TX or RX
bandwidth of the
transmission
resource group
based on the IP PM LOFD-00301201 /
detection result. NO NO No TDLOFD-00301201
Indicates the ID of
the IP path to which
an IP PM session is LOFD-00301201 /
bound. NO YES No TDLOFD-00301201
Indicates whether
the DSCP value of
a DL IP PM session
changes. NO NO Yes None
Indicates the initial
DSCP value of a DL
IP PM session. NO NO Yes None
Indicates the
modified DSCP
value of a DL IP PM
Indicates the time
when the DSCP
value of a DL IP PM
session changes. NO NO Yes None
Indicates whether
the DSCP value of
an UL IP PM
session changes. NO NO Yes None
DSCP value of an
UL IP PM session. NO NO Yes None
Indicates the
modified DSCP
value of an UL IP
PM session. NO NO Yes None
Indicates the time
when the DSCP
value of an UL IP
PM session
changes. NO NO Yes None
Indicates the
version of the
negotiated data,
when the status of
IP PM is UP. NO NO Yes None
Indicates the index

of an IP route. YES YES No None
Indicates the
cabinet number of
the board where the
IP route is located. NO NO No None
Indicates the
subrack number of
the board where the
IP route is located. NO NO No None
Indicates the slot
number of the
board where the IP
route is located. NO YES No None
Indicates the type

of sub-board on the
board where the IP
route is established. NO YES No None
Indicates the type
of port. NO NO No LOFD-003006
Indicates the port
number. NO NO No None
Indicates the type
of route. If this
parameter is set to
NEXTHOP, all the
IP packets that
meet the route
direction are first
forwarded to the
specified next hop
IP address. If this
parameter is set to
IF, all the IP packets
that meet the route
direction are first
forwarded to the
specified egress
port. NO YES No LOFD-003006
Indicates the index

of a VRF instance.
The NodeB
currently supports
default routes
domain only (VRF
index is 0). NO NO No None
Indicates the
destination IP
address of the
route. NO YES No LOFD-003006
Indicates the
subnet mask for the
destination IP
address of the
route. NO YES No LOFD-003006
Indicates the IP
address of the next
hop. NO NO No LOFD-003006
Indicates the
priority of the
routing table entry.
A smaller parameter
value indicates a
higher priority. NO NO No LOFD-003006
Indicates the
description about
the destination of
the route. NO NO No None
Indicates the type

of the IP route. A
static host route is a
manually
configured route
with the subnet
mask set to
255.255.255.255. A
static gateway route
is a manually
configured route, in
which the subnet
mask is not set to
255.255.255.255. A
dynamic host route
is a dynamically
generated route
with the subnet
mask set to
255.255.255.255. A
dynamic gateway
route is a
dynamically
generated route, in
which the subnet
mask is not set to
255.255.255.255. NO NO Yes None
Indicates the type

of the port. NO NO Yes None
Indicates the port

number. NO NO Yes None
Indicates the
destination IPv6
static IPv6 route. YES YES No TDLBFD-003006
length of the
destination IPv6
static IPv6 route. YES YES No TDLBFD-003006
Indicates the next

hop type of static
IPv6 route.
set to NEXTHOP,
all the IP packets
meeting the route
direction are first
forwarded to the
next hop IPv6
address, and then
forwarded to other LBFD-003006 /
addresses. YES NO No TDLBFD-003006
Indicates the type

of next hop IPv6 LBFD-003006 /
Indicates the next

hop IPv6 address of
the static IPv6 LBFD-003006 /
route. YES YES No TDLBFD-003006
Indicates the index

of the IPv6 interface
to which a static LBFD-003006 /
IPv6 route belongs. YES NO No TDLBFD-003006
Indicates the
priority of a static
IPv6 route. A
smaller parameter
value indicates a LBFD-003006 /
higher priority. NO NO No TDLBFD-003006
Indicates the type
of the static IPv6
route. A static host
route is a manually
configured route
with a 128-bit
prefix. A static
gateway route is a
manually
configured route
with a non-128-bit
prefix, with the next
hop IP address on
a different network
segment from the
egress port IP
address. A dynamic
host route is a
dynamically learned
(not manually
configured) route
with a 128-bit
prefix. A dynamic
gateway route is a
dynamically learned
(not manually
configured) route
with a non-128-bit
prefix, with the next
hop IP address on
a different segment
from the egress
port IP address. NO NO Yes None
Indicates the
description about
the destination of a LBFD-003006 /
static IPv6 route. NO NO No TDLBFD-003006
Indicates the
cabinet number of
the port to which
the IPSec policy
group is bound. YES NO No None
Indicates the
subrack number of
the port to which
the IPSec policy
group is bound. YES NO No None
Indicates the slot
number of the port
to which the IPSec
policy group is
bound. YES YES No None
Indicates the type
of sub-board on the
board with the port
to which the IPSec
policy group is
bound. YES YES No None
Indicates the type

of port to which the
IPSec policy group
is bound. YES YES No LOFD-003009
Indicates the
number of the port
to which the IPSec
policy group is
bound. YES YES No LOFD-003009
Indicates the name
of the IPSec policy
group. NO YES No LOFD-003009
Indicates whether
the object can be
modified or deleted
by the system. The
value
MANUAL_MODE
means that only the
user can modify or
delete the object.
The value
AUTO_MODE
means that both the
system and the
user can modify or
Indicates whether
the object is
created by the
system.
MANUAL_CREATE
D means that the
by the user
manually.
AUTO_CREATED
means that the
Indicates the
number of the port LBFD-003006 /
security policy LOFD-003024 /
group is bound. YES YES No TDLOFD-003024
LBFD-003006 /
of the IPv6 security LOFD-003024 /
policy group. NO YES No TDLOFD-003024
Indicates whether
the object can be
modified or deleted
by the system. The
value
MANUAL_MODE
means that only the
user can modify or
delete the object.
The value
AUTO_MODE
means that both the
system and the
user can modify or
Indicates whether
the object is
created by the
system.
MANUAL_CREATE
D means that the
by the user
manually.
AUTO_CREATED
means that the
Indicates the ID of
the IPSec tunnel
pair. It uniquely
identifies a pair of
primary and
secondary IPSec LOFD-003019/
tunnels. YES YES No TDLOFD-003019
Indicates the name

of the primary
IPSec policy group.
The primary IPSec
tunnel uses an
IPSec policy in the
primary IPSec LOFD-003019/
policy group. NO YES No TDLOFD-003019
Indicates the ID of
the primary IPSec
policy. The primary
IPSec tunnel uses
the primary IPSec
policy, which is
identified by this
parameter and the
MSPGN parameter LOFD-003019/
together. NO YES No TDLOFD-003019
Indicates the name

of the secondary
IPSec policy group.
The secondary
IPSec tunnel uses
an IPSec policy in
the secondary LOFD-003019/
IPSec policy group. NO YES No TDLOFD-003019
Indicates the ID of
the secondary
IPSec policy. The
secondary IPSec
tunnel uses the
secondary IPSec
policy, which is
identified by this
parameter and the
SSPGN parameter LOFD-003019/
together. NO YES No TDLOFD-003019
Indicates the ID of
the BFD session
referenced by the
primary IPSec LOFD-003019/
tunnel. NO YES No TDLOFD-003019
Indicates the ID of
the BFD session
referenced by the
secondary IPSec LOFD-003019/
tunnel. NO YES No TDLOFD-003019
Indicates the IPSec

policy in use. If the
primary IPSec
tunnel is used, the
IPSec policy in use
is the primary IPSec
policy. If the slave
IPSec tunnel is
used, the IPSec
policy in use is the
slave IPSec policy. NO NO Yes None
Indicates the name

of the IPSec policy LOFD-003009 /
group. YES YES No TDLOFD-003009
Indicates the
sequence No. of
the IPSec policy
group. The smaller
the number, the LOFD-003009 /
higher the priority. YES YES No TDLOFD-003009
Indicates the ID of
the access control LOFD-003009 /
list. NO YES No TDLOFD-003009
Indicates the name
of the IPSec LOFD-003009 /
proposal. NO YES No TDLOFD-003009
Indicates the name

of the IKE peer that
is referenced by the LOFD-003009 /
IPSec policy. NO YES No TDLOFD-003009
key protects a
unique set of data.
The elements used
to generate keys
are not reusable. If
a key is decrypted,
other keys are still
secure.
If the IPSec policy
is used to initiate
IPSec negotiation,
a PFS exchange is
launched. If the
PFS is assigned to
the local end, then
the PFS exchange
is required when
the negotiation is
launched at the
peer end. The DH
group assigned to
the local end and
the peer end should
be the same.
Otherwise, the
negotiation fails.
The security level of
the 1024-bit Diffie-
Hellman group (Dh-
group2) is higher
than that of the
768-bit Diffie-
Hellman group (Dh-
group1). However,
a longer processing
time is required by LOFD-003009 /
the Dh-group2. NO NO No TDLOFD-003009
Indicates the
configuration mode
of the IPSec SA life
cycle. If this
parameter is set to
GLOBAL, the
default SA life cycle
is used. In this
case, LTS and
LTKB are set to the
default values 3600
and 69120000,
respectively. If this
parameter is set to
LOCAL, the SA life
cycle is LOFD-003009 /
configurable. NO NO No TDLOFD-003009
Indicates the life

cycle of an IPSec
SA. An IPSec SA
becomes invalid
once its life cycle
specified by this
parameter elapses.
Before the life cycle
of an IPSec SA
elapses, the IPSec
policy is used in an
attempt to establish
a new IPSec SA
through negotiation
to ensure secure
transmission;
before the
negotiation is
complete, the
original IPSec SA is
still used. After the
negotiation is
complete, the new
SA is immediately
used. IPSec SA
negotiation takes a
period. To prevent
SA updating from
affecting
communication
security, a life cycle
longer than 900
seconds is LOFD-003009 /
recommended. NO NO No TDLOFD-003009
volume threshold
for the IPSec policy,
above which
negotiation for a
new IPSec SA is
started. The value 0
indicates that the
function, which
initiates negotiation
for a new IPSec SA
based on the traffic
volume, is disabled.
But when BS acts
as initiator in IKEv1
and this value is set
to 0, if the
responder insists or
enforces the IPSec
SA traffic lifetime to
BS, BS will enable
this function to
avoid service break LOFD-003009 /
down. NO NO No TDLOFD-003009
Indicates whether
the object can be
modified or deleted
by the system. The
value
MANUAL_MODE
means that only the
user can modify or
delete the object.
The value
AUTO_MODE
means that both the
system and the
user can modify or
Indicates the
cabinet number of
the board that
adopts the IPSec
policy. NO NO Yes None
Indicates the
subrack number of
the board that
adopts the IPSec
Indicates the slot
number of the
board that adopts
the IPSec policy. NO NO Yes None
the IPSec packet
anti-replay window.
If the value of this
parameter is set to
0, the IPSec packet
anti-replay function
is disabled. If the
value of this
parameter is set to
32, 64, 128, 256,
512, 1024, 2048 or
4096, the system
checks whether the
packets are
duplicate in the
window. A packet is
discarded if it has a
duplicate packet or
its sequence
number is smaller
than any packet in
the window. The
window slides if the
sequence number
of the packet is
larger than any
packet that is
received in the LOFD-003009 /
window. NO NO No TDLOFD-003009
Indicates whether
the object is
created by the
system.
MANUAL_CREATE
D means that the
by the user
manually.
AUTO_CREATED
means that the
Indicates the name

of the IPv6 IPSec
policy group. YES YES No None
Indicates the
sequence number
of the IPv6 IPSec
policy. A larger
value of this
parameter indicates
a lower priority. YES YES No None
Indicates the type

of the ID of the
access control list. NO YES No None
Indicates the ID of
the IPv4 ACL. NO YES No None
Indicates the ID of
the IPv6 ACL. NO YES No None
Indicates the name

of the security
proposal. NO YES No None
Indicates the name

of the IPv6 IKE
peer that is
referenced by the
IPv6 IPSec policy. NO YES No None
unique set of data.
The elements used
to generate keys
are not reusable. If
a key is
compromised, other
keys are still
secure.
If the IPSec policy
is used to initiate
IPSec negotiation,
a PFS exchange is
launched. If the
PFS is assigned to
the local end, then
the PFS exchange
is required when
the negotiation is
launched at the
peer end. The DH
group assigned to
the local end and
the peer end should
be the same.
Otherwise, the
negotiation fails.
The security level of
the 1024-bit Diffie-
Hellman group (Dh-
group2) is higher
than that of the
768-bit Diffie-
Hellman group (Dh-
group1). However,
longer processing
time is required by
the Dh-group2. NO NO No None
Indicates the
configuration mode
of the IPv6 IPSec
SA life cycle. If this
parameter is set to
GLOBAL, the
default SA life cycle
is used. In this
case, LTS and
LTKB are set to the
default values 3600
and 69120000,
parameter is set to
LOCAL, the SA life
cycle is
configurable. NO NO No None
Indicates the life
cycle of an IPv6
IPSec SA. When
the lifetime reaches
a specified value,
the IPv6 IPSec SA
becomes invalid.
Before the life cycle
of an IPv6 IPSec
SA elapses, the
IPSec policy is
used in an attempt
to establish a new
IPv6 IPSec SA
through negotiation
to ensure secure
transmission;
before the
negotiation is
complete, the
original IPv6 IPSec
SA is still used.
After the
negotiation is
complete, the new
SA is immediately
used. IPv6 IPSec
SA negotiation
takes a period. To
prevent SA
updating from
affecting
communication
security, a life cycle
longer than 900
seconds is
recommended. NO NO No None
Indicates the
effective traffic of
the IPv6 IPSec
policy. The value 0
indicates that the
function, which
for a new IPSec SA
But when BS acts
to 0, if the
enforces the IPSec
BS, BS will enable
this function to
avoid service break
down. NO NO No None
Indicates whether
the object can be
modified or deleted
by the system. The
value
MANUAL_MODE
means that only the
user can modify or
delete the object.
The value
AUTO_MODE
means that both the
system and the
user can modify or
Indicates the
cabinet number of
the board that
adopts the IPv6
IPsec policy. NO NO Yes None
Indicates the
subrack number of
the board that
adopts the IPv6
IPSec policy. NO NO Yes None
Indicates the slot
number of the
board that adopts
the IPv6 IPSec
Indicates whether
the object is
created by the
system.
MANUAL_CREATE
D means that the
by the user
manually.
AUTO_CREATED
means that the
Indicates the name

proposal. YES YES No TDLOFD-003009
Indicates the
encapsulation
mode of an IPSec
proposal, which can
be set to TUNNEL
or TRANSPORT. In
TRANSPORT
mode, only data is
encrypted. In
TUNNEL mode, the
whole IP packet is
protected, and a
new IP header is
added to the
original IP packet.
The source IP
address and the
destination IP
address of the new
IP header are the IP
addresses of two
ends of the security
tunnel. Both the
TRANSPORT mode
and the TUNNEL
mode are used for
end-to-end IPSec
protection. The
TUNNEL mode,
however, is also
applied to the
protection of a LOFD-003009 /
certain segment. NO NO No TDLOFD-003009
Indicates the
security protocol
used in an IPSec
proposal. The value
AH indicates the
Authentication
Header (AH)
protocol specified in
RFC2402. The
value ESP indicates
the Encapsulating
Security Payload
(ESP) protocol
specified in
RFC2406. The
value AH_ESP
indicates that the
ESP protocol is
preferentially used
to protect packets,
but not the AH LOFD-003009 /
protocol. NO NO No TDLOFD-003009
identity
authentication and
data integrity check.
For details about
HMAC, see
RFC4306. HMAC
currently supports
three hash
functions: message
digest algorithm 5
(MD5), secure hash
algorithm 1 (SHA1),
and secure hash
algorithm 256
(SHA256). The
three hash
functions verify data
by means of
Among them,
SHA256 provides
the highest security
level and MD5
provides the lowest
security level. For
details about the
hash functions, see
RFC2409. CBC-
MAC currently
supports AES-
XCBC-MAC-96,
which is an
enhancement to
CBC-MAC. For
details about AES-
XCBC-MAC-96, see LOFD-003009 /
Indicates the ESP

authentication
algorithm used by
an IPSec proposal.
set to NULL, the
following algorithms
are not used: MD5,
SHA1, SHA256,
and AES-XCBC- LOFD-003009 /
MAC-96. NO NO No TDLOFD-003009
Indicates the
encryption
algorithm used in
ESP. The Data
Encryption
Standard (DES) is
an internationally
used data
encryption
algorithm, which
uses a 56-bit key.
The 3DES is also
an internationally
used encryption
algorithm, which
uses a 168-bit key.
The Advanced
Encryption
Standard (AES) is
an advanced
encryption
algorithm, which
can use three types
of keys of different
lengths: 128, 192,
and 256 bits.
Therefore, different
protection levels
are available. For
Indicates the
cabinet number of
the board that
adopts the IPSec
Indicates the
subrack number of
the board that
adopts the IPSec
Indicates the slot
number of the
board that adopts
the IPSec proposal. NO NO Yes None
Indicates the
local end sends
LLDP packets to
neighboring nodes.
If the status of the
local LLDP does not
change, the
interface module of
the LLDP port
sends LLDP
packets to
neighboring nodes
at a regular interval
specified by this
parameter. The
network topology
discovery frequency
can be adjusted by
changing the
setting of this
parameter. NO NO No None
information is
stored in
neighboring nodes
is calculated with
the following
formula:
TTL = Min (65535,
(TXINTVAL x
HOLDMULTI) + 1)
That is, TTL is the
smaller one of
65535 and
(TXINTVAL x
HOLDMULTI) + 1.
The validity period
(TTL) of storing the
local LLDP
information in
neighboring nodes
can be adjusted by
changing the value
of this parameter.
After a neighboring
node receives an
LLDP packet, it
updates the
information aging
time of the transmit
end based on this
validity period. If the
value of TTL is 0,
the receive end
needs to remove
the LLDP
information about
the transmit end
immediately. NO NO No None
Disabled. Interface
LLDP modules
have four states:
transmit and
receive state
(RxTx), transmit
state (Tx), receive
state (Rx), and
neither transmit nor
receive state
(Disabled). When
the interface LLDP
module state
changes, the
interface LLDP
module state
machine needs to
be reinitialized.
When the interface
LLDP module state
changes from RxTx
or Tx to Rx or
Disabled, the
system needs to
wait for a period
specified by this
parameter before
reinitializing the
internal state
machine. By
default, the
interface LLDP
modules of the
system are in the
RxTx state and the
state cannot be
changed. NO NO No None
Under normal
conditions, interface
LLDP modules
periodically send
LLDP packets to
neighboring nodes.
When discovering a
new neighboring
node, the local end
enters the fast
transmit mode. That
is, the system
needs to wait for at
least a period
specified by this
parameter before
sending local LLDP
information to
neighboring nodes.
The state of the
local interface LLDP
module becomes
normal only after
the local interface
LLDP module has
sent local LLDP
information to
neighboring nodes
for four consecutive
times. If the system
discovers another
new neighboring
node in a fast
transmit mode,
LLDP packets are
still sent in the fast
transmit mode. NO NO No None
management
system (that is, this
switch is turned off
or the network
management
system has not
subscribed to LLDP
change events) to
the state that the
system needs to
report LLDP change
events (that is, this
switch is turned on
and the network
management
system has
subscribed to LLDP
change events), the
system immediately
reports all the
current local and
neighboring LLDP
information to the
network
management
system. The
parameters set by
running this
command take
effect for the whole
base station, that is,
the parameter
settings control the
capabilities of all
LLDP ports to send
LLDP change
events. NO NO No None
Indicates the
minimum delay in
reporting a
neighboring LLDP
information change
notification to the
network
management
system by the base
station. This delay
takes effect only for
such neighboring
LLDP information
change events as
adding, removing,
and aging a
neighboring node. If
neighboring LLDP
information
changes frequently,
this parameter can
be set to a large
value to reduce the
frequency of
sending
neighboring LLDP
information to the
network
management
system and
minimize network
topology flapping. NO NO No None
Indicates whether
to enable link
aggregation. NO NO Yes None
Indicates the trunk

number of the
Ethernet trunk link
to which an LLDP
port has been
added. NO NO Yes None
Indicates whether
an LLDP port has
been added to an
Ethernet trunk link. NO NO Yes None
Indicates whether
to enable automatic
Indicates whether
to support auto
negotiation. In auto
negotiation mode, a
connection can be
set up even if
different duplex
modes or data rates
are configured at
both ends. NO NO Yes None
Indicates the
cabinet number of
the board where the
LLDPLOCAL is
Indicates the
chassis ID of a
device. The port
that receives LLDP
information can use
Chassis ID and Port
ID to identify a peer
device. NO NO Yes None
Indicates the
subtype of a
chassis ID. NO NO Yes None
Indicates the aging
time of the
information about
the neighboring
LLDP port. When
the aging time is 0
and the local end
does not receive
update information
about the
neighboring LLDP
port, the
neighboring LLDP
port information will
be aging out. NO NO Yes None
Indicates the
management
address that the
network
management
system uses to
manage and
identify a network
device. NO NO Yes None
Indicates the type
of a management
where, digits
indicate the
maximum transmit
rate (for example,
10 indicates the
maximum transmit
rate of 10 Mbit/s),
Base indicates that
baseband
transmission is
used to transmit
signals, and types
have the following
meanings: T
indicates
unshielded twisted
pair (UTP) cables, 5
indicates thick
coaxial cables, 2
indicates thin
coaxial cables, X
indicates the
8B/10B encoding
scheme with 8-bit
data and 2-bit error
correction data, TX
indicates category 5
twisted pair, FD
indicates full duplex
(for example,
1000BaseXFD
indicates full duplex
of 1000BaseX), and
HD indicates half
duplex. For details
about other types,
see RFC3636. NO NO Yes None
Indicates the
maximum frame
length. When the
value of the
Maximum Frame
Size parameter is 0,
the base station
cannot detect any
valid maximum
frame size. NO NO Yes None
Indicates the
description of an
LLDP port. NO NO Yes None
port. NO NO Yes None
Indicates the
subtype of a port
ID. NO NO Yes None
Indicates the
number of the
Ethernet port where
the LLDPLOCAL is
Indicates the ID of
the VLAN to which
the port of a Layer
2 switch (bridge)
belongs. A port can
have at most one
port VLAN ID. Value
0 indicates that the
port does not
support VLANs or
the port is not
configured with a
VLAN. NO NO Yes None
Indicates whether
to enable port and
protocol VLAN. NO NO Yes None

port and protocol
VLAN ID. The
system supports a
maximum of 16 port
and protocol VLAN
IDs. NO NO Yes None
Indicates whether
to support the port
and protocol VLAN,
which is an
untagged VLAN for
a port. This
untagged VLAN
can map packets to
packets with
specified VLANs
according to
specific rules. When
a packet enters a
port with an
untagged VLAN,
the packet is
tagged with a
specific VLAN.
When the packet
leaves the port with
an untagged VLAN,
the tagged VLAN is
removed from the
packet. The port
and protocol VLAN
can be configured
for LLDP
communication or
not. However, the
port and protocol
VLAN helps users
grasp the system
configuration.
Indicates the total NO NO Yes None
number of
discarded LLDP
frames. NO NO Yes None
Indicates the total
number of
discarded LLDP
type-length-values
(TLVs). NO NO Yes None
Indicates the total
number of received
erroneous LLDP
frames. NO NO Yes None
Indicates the total
number of received
LLDP frames. NO NO Yes None
Indicates the total

number of aged
LLDP neighbors. NO NO Yes None
Indicates the total
number of
unrecognizable
LLDP type-length-
values (TLVs). NO NO Yes None
Indicates the slot

number of the
board where the
LLDPLOCAL is
Indicates the type

of sub-board on the
board where the
LLDPLOCAL is
Indicates the
subrack number of
the board where the
LLDPLOCAL is
Indicates the
enabled system
capabilities. NO NO Yes None
Indicates the
capabilities
supported by the
system. The
capabilities reflect
the main functions
of the system. A
single system can
provide multiple
functions, such as
routing, bridge, and
relay. NO NO Yes None
Indicates the
system description,
such as the vendor,
device name,
hardware type, and
version information
about the software
operating system.
Such system data
is useful in
collecting the
network traffic. NO NO Yes None
Indicates the
system name. NO NO Yes None
Indicates the total
number of sent
LLDP frames. NO NO Yes None

VLAN names. A
VLAN name list
consists of three
fields: VLAN ID,
bracket, and VLAN
name. A VLAN
name list supports
a maximum of 32
VLAN names. NO NO Yes None
Indicates the
number of VLAN
names recorded in
the VLAN name list. NO NO Yes None
Indicates the
number of port and
protocol VLAN IDs. NO NO Yes None
Indicates whether
the local LLDP port
is associated with
the VLAN. If the
local LLDP port is
bound to a VLAN,
LLDP packets sent
by the local end
carry the VLAN ID. NO NO No None
Indicates the VLAN

ID of local LLDP
port. NO NO No None
Indicates the VLAN

priority of local
LLDP port. NO NO No None
Indicates whether
to enable the local
maintenance
Ethernet port.
When the
parameter is set to
DISABLE, the local
maintenance
Ethernet port is
disabled if the
remote OM channel
is working properly,
but is enabled if the
remote OM channel
is faulty. When the
parameter is set to
ENABLE, the local
maintenance
Ethernet port is
permanently
enabled. NO NO No None
Indicates whether
to enable the local
maintenance

of the local
maintenance
Ethernet port.If the
parameter is
Down,this port
cannot be
maintained. NO NO Yes None
Indicates the
number of
discarded packets
that are received at
the local
maintenance
Indicates the
number of packets
received at the local
maintenance
Indicates the
number of
discarded packets
that are transmitted
at the local
maintenance
Indicates the
number of packets
transmitted at the
local maintenance
parameter must
meet the following
conditions:
(1) It must be a
valid IP address of
Class A, B, or C,
and cannot be set
to 0.x.x.x or
127.x.x.x.
(2) It must be
different from the
local IP address of
any remote
maintenance
channel and from
any device IP
address.
(3) It must be on
different network
segments from the
IP address of any
remote
maintenance
channel and from
any device IP
address.
(4) It must be
different from any
IP address
configured on other
ports.
(5) It must be on
different network
segments from the
destination IP
address of any IP
route. NO NO No None
Indicates the
subnet mask for the
IP address of a
local maintenance
channel. This
subnet mask must
be a valid mask
address and cannot
be 0.0.0.0 or
255.255.255.255. NO NO No None
Indicates the IPv6
maintenance
channel. This IPv6
address must be a
global unicast
address or a link- LBFD-003006 /
local address. NO NO No TDLBFD-003006
length of the IPv6
address of a local
maintenance LBFD-003006 /
channel. NO NO No TDLBFD-003006

of the IPv6 address
of the local
maintenance
Indicates the time

period during which
the IPv6 address of
the local
maintenance
channel is in valid
state. NO NO Yes None
Indicates the time

period during which
the IPv6 address of
the local
maintenance
channel is in
preferred state. The
valid state is
categorized into the
preferred state and
the deprecated
state. In preferred
state, the address
can be freely used.
In deprecated state,
the connections
previously
established through
this address are still
usable, whereas
any connection
newly established
through this
address is not
usable. NO NO Yes None
Indicates the
cabinet number of
the board where the
Indicates the
subrack number of
the board where the
Indicates the slot
number of the
board where the
Indicates the port

type. YES YES No None
Indicates the port
number. YES YES No None
LOFD-00301101 /
Indicates the switch TDLOFD-00301101
for limiting the line LOFD-00301102 /
rate at the port. NO NO No TDLOFD-00301102
Indicates the UL
committed
information rate
after rate limitation
is configured at a
port. The precision
of the UL committed
information rate
supported by the
UMPTb is 64 Kbit/s,
the precision
supported by the
other board is 32
Kbit/s. If the
configured UL
committed
information rate is
not a multiple of the
precision, the UL LOFD-00301101 /
committed TDLOFD-00301101
information rate is LOFD-00301102 /
rounded up. NO YES No TDLOFD-00301102
Indicates the
Committed Burst
Size (CBS) after
rate limitation is
configured at a
port.The minimum LOFD-00301101 /
rate supported by TDLOFD-00301101
the UMPTb is 64 LOFD-00301102 /
Kbit/s. NO YES No TDLOFD-00301102
Indicates the
Excess Burst Size LOFD-00301101 /
(EBS) after rate TDLOFD-00301101
limitation is LOFD-00301102 /
configured at a port. NO YES No TDLOFD-00301102
Indicates the type

of sub-board on the
board where a port
Indicates the DL
committed
information rate
after rate limitation
is configured at a
port.This parameter
computes the value
of Physical Port
Down Link
Admission.The LOFD-00301101 /
minimum rate TDLOFD-00301101
supported by the LOFD-00301102 /
UMPTb is 64 Kbit/s. NO YES No TDLOFD-00301102
Indicates the
number of the
cabinet where the
MLPPP group is
Indicates the
number of the
subrack where the
MLPPP group is
Indicates the
number of the slot
where the MLPPP
group is located. YES YES No None
Indicates the
number of the LBFD-00300403 /
MLPPP group. YES YES No TDLBFD-00300403
Indicates whether
an MLPPP group
supports the multi-
class feature.
set to ENABLE, the
MLPPP group
supports the Class
of Service (CoS)
feature and four or
eight service types
of different LBFD-00300403 /
priorities. NO NO No TDLBFD-00300403
Indicates the
authentication type
of the MLPPP LBFD-00300403 /
group. NO NO No TDLBFD-00300403
Indicates the
authentication user
name of an MLPPP LBFD-00300403 /
group. NO YES No TDLBFD-00300403
Indicates the
authentication LBFD-00300403 /
password. NO YES No TDLBFD-00300403
Indicates the local
IP address. If this
parameter is set to
0.0.0.0, this IP
address needs to
be negotiated. If
this parameter is
not set to 0.0.0.0, it
must be set to a
valid IP address of
class A, B, or C but
must not be the
reserved address LBFD-00300403 /
0.x.x.x or 127.x.x.x. NO NO No TDLBFD-00300403
Indicates the
subnet mask of the
local IP address. If
this parameter is
set to 0.0.0.0, it
needs to be LBFD-00300403 /
negotiated. NO NO No TDLBFD-00300403
Indicates the peer
IP address. When
the BS is connected
to a peer
equipment, the peer
IP address can be
either user-
specified or set to
0.0.0.0. If this
parameter is set to
0.0.0.0, this IP
address is obtained
by means of LBFD-00300403 /
negotiation. NO NO No TDLBFD-00300403
Indicates the
MP/MC head option LBFD-00300403 /
of the MLPPP. NO NO No TDLBFD-00300403
Indicates whether
to enable PPP
multi-frame LBFD-00300403 /
multiplexing. NO NO No TDLBFD-00300403
Indicates the
fragment size of an LBFD-00300403 /
MLPPP group. NO NO No TDLBFD-00300403
Indicates the
maximum length of
the PPP MUX LBFD-00300403 /
subframe. NO NO No TDLBFD-00300403
Indicates the
maximum length of
frame. NO NO No TDLBFD-00300403
Indicates the
timeout duration of
a PPP MUX
combination. If the
PPP MUX
combination takes
longer time than
this parameter
value, an alarm
related to the PPP
MUX combination LBFD-00300403 /
timeout is reported. NO NO No TDLBFD-00300403
Indicates the
number of classes LBFD-00300403 /
of service. NO NO No TDLBFD-00300403
LBFD-00300403 /
to enable IP header LBFD-00300401 /
compression. NO NO No TDLBFD-00300401
Indicates the
threshold above
which the MLPPP
packet loss alarm is LBFD-00300403 /
generated. NO NO No TDLBFD-00300403
Indicates the
threshold below
which the MLPPP
packet loss alarm is LBFD-00300403 /
cleared. NO NO No TDLBFD-00300403

to enable IPHC TDLBFD-00300403
suboption LBFD-00300401 /
of an MLPPP
group. NO NO Yes None

of the IPCP
protocol. NO NO Yes None
of the PPP MUX. NO NO Yes None
Indicates the
negotiation result of
the local IP
Indicates the
the local IP
Indicates themask. NO NO Yes None
the peer IP
Indicates the
the multi-class PPP. NO NO Yes None
Indicates the
the maximum RX
unit. NO NO Yes None
Indicates the
the PPP MUX. NO NO Yes None
Indicates the
the address field
and control field. NO NO Yes None
Indicates the
the protocol field
compression. NO NO Yes None
Indicates the
the IPHC. NO NO Yes None
Indicates the
number of packets
received. NO NO Yes None
Indicates the
number of packets
sent. NO NO Yes None
Indicates the RX
traffic. NO NO Yes None
Indicates the TX
traffic. NO NO Yes None
Indicates the
number of IP
addresses of an
MLPPP group. NO NO Yes None
IP addresses of an
MLPPP group. NO NO Yes None
Indicates the type

of sub-board on the
board where an
MLPPP group is
Indicates the
number of bytes
received.
number of
discarded packets
Indicates the
number of bytes
transmitted. NO NO Yes None
Indicates the
number of
discarded packets
Indicates the
number of the
cabinet where the
MLPPP link is
Indicates the
number of the
subrack where the
MLPPP link is
Indicates the
number of the slot
where the MLPPP
link is located. YES YES No None
Indicates the
MLPPP link. YES NO No TDLBFD-00300403
Indicates the
MLPPP group. NO NO No TDLBFD-00300403
Indicates the
number of the
subrack housing
the board where the
E1/T1 port carrying
the MLPPP link is LBFD-00300403 /
located. NO NO No TDLBFD-00300403
Indicates the
number of slot
holding the board
where the E1/T1
port carrying the
MLPPP link is LBFD-00300403 /
located. NO YES No TDLBFD-00300403
Indicates the
number of the
E1/T1 port carrying LBFD-00300403 /
the MLPPP link. NO NO No TDLBFD-00300403
Indicates the
number of the
E1/T1 slot carrying LBFD-00300403 /
the MLPPP link. NO YES No TDLBFD-00300403
Indicates the
Maximum Receive
Unit (MRU). The
received packet
whose length is
greater than this
parameter value is LBFD-00300403 /
discarded. NO NO No TDLBFD-00300403
Indicates whether
to enable protocol LBFD-00300403 /
field compression. NO NO No TDLBFD-00300403
Indicates whether
to enable the
compression of the
address field and LBFD-00300403 /
control field. NO NO No TDLBFD-00300403
Indicates the
timeout duration of
the MLPPP link LBFD-00300403 /
Indicates the type

of sub-board where
an MLPPP link is
Indicates the type
of sub-board where
an MLPPP group is LBFD-00300403 /
established. NO YES No TDLBFD-00300403

of the MLPPP link. NO NO Yes None

of the Link Control
Protocol (LCP)
Indicates the
the maximum RX
Indicates the
the protocol field
Indicates the
the Address-And-
Control-Field-
Compression
(ACFC). NO NO Yes None
Indicates the type

of sub-board on the
board where the
E1/T1 port carrying
the MLPPP link is LBFD-00300403 /
located. NO YES No TDLBFD-00300403
Indicates the
number of packets
Indicates the
number of bytes
received.
number of
discarded packets
Indicates the
number of packets
Indicates the
number of bytes
Indicates the
number of
discarded packets
Indicates the
master/slave flag of
the remote LBFD-004002 /
maintenance TDLBFD-004002
channel. YES YES No LOFD-003005
Indicates the local

IP address of a
remote LBFD-004002 /
channel. NO YES No LOFD-003005
Indicates the local

subnet mask of a
remote LBFD-004002 /
Indicates the peer
IP address of the
remote
maintenance
channel, that is, the LBFD-004002 /
IP address of the TDLBFD-004002
M2000. NO YES No LOFD-003005
Indicates the
subnet mask of the
peer IP address for
the remote LBFD-004002 /
Indicates the bearer
type of a remote LBFD-004002 /
channel. NO NO No LOFD-003005
IP addresses are
not in the same
network segment
and the network
segment of the
device IP address
cannot cover that of
the peer IP
address, run the
ADD IPRT
command to add a
route to the remote
maintenance
channel.
set to YES, a route
is bound to the
remote
maintenance
channel, and the
route takes effect
only when the
remote
maintenance takes
effect. If this
parameter is set to
NO, no route is
bound to the
remote
maintenance
channel, and a
remote
maintenance
channel switchover
does not trigger a LBFD-004002 /
route status TDLBFD-004002
switchover. NO NO No LOFD-003005

of a remote
maintenance
Indicates whether
the remote
maintenance
channel is being
used. NO NO Yes None
Indicates the index

of the active route
bound to the
remote
maintenance
channel. NO YES No None
remote HA system
is applied to the
M2000 and no
destination IP
address network
segment for the
route covers the
M2000 destination
IP address network
segment, run the
ADD IPRT
command to add a
route to the M2000.
set to YES, a
standby route is
bound to the
remote
maintenance
channel, and the
route takes effect
only when the
remote
maintenance takes
effect. If this
parameter is set to
NO, no standby
route is bound to
the remote
maintenance
channel, and a
remote
maintenance
channel switchover
does not trigger a
route status
switchover. NO NO No None
Indicates the index

of the standby route
bound to the
remote
maintenance
Indicates the type
of detection
mechanism bound
to the remote
maintenance
channel. If this
parameter is set to
NONE, no detection
mechanism is
bound to the
remote
maintenance
channel and an
active/standby
remote
maintenance
channel switchover
is triggered by
switchover
message sent by
the M2000. If this
parameter is set to
UDPSESSION, the
UDP ping detection
is bound to the
remote
maintenance
channel and an
active/standby
remote
maintenance
channel switchover
depends on the
UDP session
detection,only GSM
currently supports
this function. NO NO No None
Indicates the
session number of
the UDP ping
detection bound to
the remote
maintenance
Indicates the local

IPv6 address of a
remote
maintenance
channel. This LBFD-003006 /
global unicast LBFD-004002 /
Indicates the peer
IPv6 address of a
remote
maintenance
channel. This LBFD-003006 /
global unicast LBFD-004002 /
address. NO YES No TDLBFD-004002

of an IPv6 remote
maintenance
Indicates the
cabinet number of
the board where the
packet filtering is
used. YES NO No None
Indicates the
subrack number of
the board where the
packet filtering is
used. YES NO No None
Indicates the slot

number of the
board where the
packet filtering is
used. YES YES No None
Indicates the port

type. The NodeB
currently does not
support SUBIF. YES YES No None
Indicates the port
Indicates the ID of
an advanced ACL.
The value of this
parameter ranges LOFD-003014 /
from 3000 to 3999. NO YES No TDLOFD-003014
Indicates whether
to permit or reject
access of the data
that does not match
the ACL rule. If this
parameter is set to
PERMIT, data that
does not match the
ACL rule is allowed
to pass. If this
parameter is set to
DENY, data that
does not match the
ACL rule is LOFD-003014 /
discarded. NO NO No TDLOFD-003014
Indicates the type
of sub-board on the
board where packet
filter is enabled. YES YES No None
Indicates the
number of
transmitted
packets. This
parameter is
reserved for further
extension. NO NO Yes None
Indicates the
number of received
Indicates the
number of
permitted packets
on the TX channel.
This parameter is
Indicates the
number of
permitted packets
on the RX channel. NO NO Yes None
Indicates the
number of rejected
packets on the TX
channel. This
parameter is
Indicates the
number of rejected
packets on the RX
Indicates the
number of bytes
contained in
transmitted
packets. This
parameter is
Indicates the
number of bytes
contained in
received packets. NO NO Yes None
Indicates the
number of bytes
contained in
permitted packets
on the TX channel.
This parameter is
Indicates the
number of bytes
contained in
permitted packets
on the RX channel. NO NO Yes None
Indicates the
number of bytes
contained in
rejected packets on
the TX channel.
This parameter is
Indicates the
number of bytes
contained in
rejected packets on
the RX channel. NO NO Yes None
Indicates the
number of bytes
contained in the
packets that do not
match the ACL
rules for packet
filtering. If MB is set
to PERMIT, this
parameter
measures the
number of bytes
contained in the
accessed packets.
If MB is set to
DENY, this
parameter
measures the
number of bytes
contained in the
discarded packets.
This parameter is
valid only when
CATALOG is set to
PORT. NO NO Yes None
Indicates the
number of the
packets that do not
match the ACL
rules for packet
filtering. If MB is set
to PERMIT, this
parameter
measures the
number of
accessed packets.
If MB is set to
DENY, this
parameter
measures the
number of
discarded packets.
This parameter is
valid only when
CATALOG is set to
PORT. NO NO Yes None
Indicates the ID of
an ACL at layer 2.
The value of this
parameter ranges
from 4000 to 4999.
The BS filters
packets based on LOFD-003014 /
only VLAN IDs. NO YES No TDLOFD-003014
Indicates the packet
filtering mode. The
BS can filter
packets based on
the advanced ACL,
layer-2 ACL, or both LOFD-003014 /
at the same time. NO NO No TDLOFD-003014
Indicates the IP
address in a ping
filter entry. This
address must be a
valid IP address of
class A, B, or C. It
can also be a
network segment LOFD-003014 /
address. YES YES No TDLOFD-003014
Indicates the
subnet mask
corresponding to
the IP address in a
ping filter entry. The
subnet mask LOFD-003014 /
cannot be 0.0.0.0. YES YES No TDLOFD-003014
Indicates the index

Indicates the
threshold above
which the packet
loss alarm is
generated on an IP
path. When the
packet loss rate of
an IP path exceeds
the threshold, the
packet loss alarm is
generated on the IP
path. NO NO No None
Indicates the
threshold below
which the packet
loss alarm is
cleared on an IP
path. When the
packet loss rate of
an IP path does not
exceed the
threshold, the
packet loss alarm is
cleared on the IP
path. NO NO No None
Indicates the PMTU
detection mode:
active or passive.
When this
parameter is set to
ACTIVE, PMTU
detection is
periodically
performed. When
this parameter is
set to PASSIVE, the
PMTU is adjusted
according to the
ultra-large Internet
Control Message
Protocol (ICMP) LBFD-003006 /
messages received. NO NO No TDLBFD-003006
Indicates the
destination port
number of the UDP
packets for PMTU
detection. Ports
65020, 65010,
65099, and 65100
are used for IP PM,
FPMUX, and AACP,
and therefore these
ports should not be
used for PMTU LBFD-003006 /
detection. NO NO No TDLBFD-003006
Indicates the
timeout duration of
a single PMTU LBFD-003006 /
detection. NO NO No TDLBFD-003006
Indicates the aging

period of the PMTU LBFD-003006 /
table. NO NO No TDLBFD-003006
Indicates the
default DSCP. If no
DSCP is specified
for a link, the
default DSCP is
used when a PMTU
detection is
performed on the LBFD-003006 /
link. NO NO No TDLBFD-003006
Indicates the
number of the
cabinet that houses
the board where
port security is
enabled. YES NO No None
Indicates the
number of the
subrack that
houses the board
where port security
is enabled. YES NO No None
Indicates the
number of the slot
corresponding to
the board where
port security is
enabled. YES YES No None
Indicates the type

of sub-board on the
board where port
security is enabled. YES YES No None
Indicates the type

of port on which
port security is LOFD-003014 /
enabled. YES NO No TDLOFD-003014
Indicates the
number of the port
on which port
security is LOFD-003014 /
configured. YES YES No TDLOFD-003014
Indicates whether
to disable services
on a specified port
to implement port
security. If this
parameter is set to
DISABLE, running
services on the port
is prohibited,
thereby
guaranteeing the LOFD-003014 /
security of the port. NO NO No TDLOFD-003014
Indicates the
cabinet number of
the board where the
PPP link is located. YES NO No None
Indicates the
subrack number of
the board where the
PPP link is located. YES NO No None
Indicates the slot

number of the
board where the
PPP link is located. YES YES No None
Indicates the
number of the PPP LBFD-003004 /
link. YES NO No TDLBFD-003004
Indicates the
number of the
E1/T1 port that
carries the PPP
link. NO NO No None
Indicates the mode
in which the local
end of a PPP link
authenticates the
peer end. The
authentication
mode is classified
into NONAUTH,
PAP, and CHAP. In
PAP mode, user
names and
passwords are
transmitted
explicitly on the
network. If they are
intercepted during
transmission, a
great threat to
network security is
caused. Thus, the
PAP is applied only
to the network
environment with
low security
requirements. With
three handshakes,
the CHAP provides
a more secure
authentication. In
CHAP mode, only
user accounts
rather than
passwords are
transmitted,
enhancing security
compared to the LBFD-003004 /
PAP. NO NO No TDLBFD-003004
Indicates the
authentication user
name of the PPP LBFD-003004 /
link. NO YES No TDLBFD-003004
Indicates the
password for
authenticating a LBFD-003004 /
PPP link. NO YES No TDLBFD-003004
Indicates the
number of the
ET/T1 timeslot that
carries the PPP LBFD-003004 /
link. NO YES No TDLBFD-003004
Indicates the local
IP address. If this
parameter is set to
0.0.0.0, this
parameter needs to LBFD-003004 /
be negotiated. NO NO No TDLBFD-003004
Indicates the
subnet mask of the
local IP address. If
this parameter is
set to 0.0.0.0, it
needs to be LBFD-003004 /
negotiated. NO NO No TDLBFD-003004
Indicates the peer

IP address. If the
BS is connected to
an upper-level
node, this address
is specified
according to the
upper-level node. If
the BS is cascaded
to a lower-level
node, this address
must be specified.
This parameter can LBFD-003004 /
be set to 0.0.0.0. NO NO No TDLBFD-003004
Indicates whether
to enable the PPP
multiframe
multiplexing
function. If this
parameter is set to
ENABLE, multiple
PPP frames are
multiplexed on the LBFD-003004 /
PPP link to reduce TDLBFD-003004
the bandwidth LBFD-00300402 /
overhead. NO NO No TDLBFD-00300402
Indicates the
maximum length of LBFD-003004 /
the PPP TDLBFD-003004
Multiplexing (MUX) LBFD-00300402 /
subframe. NO NO No TDLBFD-00300402

maximum length of TDLBFD-003004
frame. NO NO No TDLBFD-00300402
timeout duration of TDLBFD-003004
combination. NO NO No TDLBFD-00300402
LBFD-003004 /
to enable IP header LBFD-00300401 /
compression. NO NO No TDLBFD-00300401

to enable IPHC TDLBFD-003004
suboption LBFD-00300401 /
Indicates the
Maximum Receive
Unit (MRU). If the
size of a received
packet is greater
than the MRU
value, the packet is LBFD-003004 /
discarded. NO NO No TDLBFD-003004
Indicates whether
to enable protocol LBFD-003004 /
field compression. NO NO No TDLBFD-003004
Indicates whether
to enable the
compression of the
address field and LBFD-003004 /
control field. NO NO No TDLBFD-003004
Indicates the
timeout duration for
the PPP link LBFD-003004 /

of the PPP link. NO NO Yes None

of the Link Control
Protocol (LCP)
of the IP Control
Protocol (IPCP). NO NO Yes None

of the PPP MUX. NO NO Yes None
Indicates the local
IP address
negotiated with the
Indicates the mask
of the local IP
address that is
negotiated with the
Indicates the peer
IP address
negotiated with the
Indicates the
the IP header
Indicates the
the compression
switch of the
address field and
control field. NO NO Yes None
Indicates the
the compression
switch of the
protocol field. NO NO Yes None
Indicates the
the maximum RX
Indicates the
the PPP MUX. NO NO Yes None
Indicates the
number of packets
received on the
PPP link. NO NO Yes None
Indicates the
number of packets
transmitted on the
Indicates the RX
traffic of the PPP
link. NO NO Yes None
Indicates the TX
traffic of the PPP
Indicates the
number of IP
addresses of the
IP addresses of the
Indicates the PPP
frame error rate
threshold above
which the related LBFD-003004 /
alarm is generated. NO NO No TDLBFD-003004
Indicates the PPP
frame error rate
threshold below
which the related LBFD-003004 /
alarm is cleared. NO NO No TDLBFD-003004
Indicates the type
of sub-board on the
board where a PPP
link is located. YES YES No None
Indicates the
number of bytes
received on the
Indicates the
number of
discarded packets
received on the
Indicates the
number of bytes
transmitted on the
Indicates the
number of
discarded packets
transmitted on the
Indicates the index

Indicates the lowest

priority of queue 0.
If the Differentiated
Services Code
Point (DSCP) value
of a service packet
is greater than or
equal to this
parameter value,
the service packet
is assigned to LBFD-00300201 /
queue 0. NO NO No TDLBFD-00300201
If the DSCP value
of a service packet
is smaller than the
PRI0 value but
greater than or
equal to this
parameter value,
the service packet

If the DSCP value
of a service packet
is smaller than the
PRI1 value but
greater than or
equal to this
parameter value,
the service packet

If the DSCP value
of a service packet
is smaller than the
PRI2 value but
greater than or
equal to this
parameter value,
the service packet
If the DSCP value
of a service packet
is smaller than the
PRI3 value but
greater than or
equal to this
parameter value,
the service packet

If the DSCP value
of a service packet
is smaller than the
PRI4 value but
greater than or
equal to this
parameter value,
the service packet

If the DSCP value
of a service packet
is smaller than the
PRI5 value but
greater than or
equal to this
parameter value,
the service packet
Indicates the
number of the
cabinet that houses
the board where a
transmission
resource group is
Indicates the
number of the
subrack that
houses the board
where a
transmission
resource group is
Indicates the
number of the slot
corresponding to
the board where a
transmission
resource group is

type of the
transmission group.
The NodeB
currently does not LOFD-003011 /
support ATM. YES YES No TDLOFD-003011
Indicates the type
of sub-board on the
transmission group.
The eNodeB
currently does not
support
UNCHANNELLED_
COVERBOARD. YES YES No None
Indicates the type
of port where a
transmission
resource group is
carried. The
eNodeB currently
does not support
STM1, IMA, UNI, or
FRAATM. YES YES No None
Indicates the
number of the port
where the
transmission
resource group is
transmission
resource group.
When you add a
PPP link, an MP
group, an Ethernet
port, an Ethernet
trunk, or a tunnel,
the system
automatically
creates a
transmission
resource group with
Transmission
Resource Group ID
set to
DEFAULTPORT(De
fault Port). When
you remove any of
the preceding
objects, the system
automatically
removes the
Indicates the rate

unit of the TX
bandwidth, RX
bandwidth, TX CIR,
RX CIR, TX PIR
and RX PIR of the
transmission
resource group.
The eNodeB
currently does not LOFD-003011 /
support CELL/S. NO NO No TDLOFD-003011
Indicates the
maximum uplink
bandwidth of a
transmission
resource group at
the MAC layer
when the
transmission
resource group is
carried over IP. This
parameter value is
used as the uplink
transport admission
bandwidth and TX
traffic shaping
bandwidth.The
LMPT can be
configured with a
maximum of 360
Mbit/s TX
bandwidth.The
UMPT can be
configured with a
maximum of 1
Gbit/s TX
bandwidth.The
value of TX
bandwidth is set to
the maximum value
of TX bandwidth
supported by the
board when it
bigger than the LOFD-003011 /
maximum one. NO YES No TDLOFD-003011
Indicates the RX
bandwidth of a
transmission
resource group.This
parameter value is
used as the
downlink transport
admission
bandwidth.The
minimum rate
supported by the
UMPTb is 64
Kbit/s.The LMPT
can be configured
with a maximum of
540 Mbit/s RX
bandwidth.The
UMPT can be
configured with a
maximum of 1
Gbit/s RX
bandwidth.The
value of RX
bandwidth is set to
the maximum value
of RX bandwidth
supported by the
board when it
Indicates the TX
committed burst
size of a
transmission
resource group.The
LMPT can be
configured with a
maximum of 400
Mbit/s TX
committed burst
size.The UMPT can
be configured with
a maximum of 1
Gbit/s TX
committed burst
size.The value of
TX committed burst
size is set to the
maximum value of
TX committed burst
size supported by
the board when it
maximum one. NO NO No TDLOFD-003011
Indicates the TX
excessive burst size
of a transmission
resource group.The
LMPT can be
configured with a
maximum of 450
Mbit/s TX excessive
burst size.The
UMPT can be
configured with a
maximum of 1
Gbit/s TX excessive
burst size.The
value of TX
excessive burst size
is set to the
maximum value of
TX excessive burst
size supported by
the board when it
maximum one. NO NO No TDLOFD-003011
Indicates the index

of the operator. This
parameter is used
to differentiate
between operators.
This parameter is
reserved for future
extension and does
not take effect
currently. NO NO No None
Indicates the
scheduling weight
of a transmission
resource group.
This parameter is
used in calculating
the bandwidth
scheduled to a
resource group,
which helps
achieve the user LOFD-003011 /
admission control. NO NO No TDLOFD-003011
Indicates the
transmit CIR of the
transmission
resource group.The
LMPT can be
configured with a
maximum of 360
Mbit/s TX
committed
information
rate.The UMPT can
be configured with
a maximum of 1
Gbit/s TX
committed
information
rate.The value of
TX committed
information rate is
set to the maximum
value of TX
committed
information rate
supported by the
board when it
Indicates the
receive CIR of the
transmission
resource group.This
parameter value is
used as the
downlink transport
admission
bandwidth for non-
flow-control
services.The LMPT
can be configured
with a maximum of
540 Mbit/s RX
committed
information
rate.The UMPT can
be configured with
a maximum of 1
Gbit/s RX
committed
information
rate.The value of
RX committed
information rate is
set to the maximum
value of RX
committed
information rate
supported by the
board when it
bigger than the
maximum one.Only
the LTE supports
this function LOFD-003011 /
currently. NO YES No TDLOFD-003011
Indicates the
transmit PIR of the
transmission
resource group.The
LMPT can be
configured with a
maximum of 360
Mbit/s TX peak
information
rate.The UMPT can
be configured with
a maximum of 1
Gbit/s TX peak
information
rate.The value of
TX peak
information rate is
set to the maximum
value of TX peak
information rate
supported by the
board when it
Indicates the
receive PIR of the
transmission
resource group.This
parameter value is
used as the
downlink transport
admission
bandwidth.The
LMPT can be
configured with a
maximum of 540
Mbit/s RX peak
information
rate.The UMPT can
be configured with
a maximum of 1
Gbit/s RX peak
information
rate.The value of
RX peak
information rate is
set to the maximum
value of RX peak
information rate
supported by the
board when it
bigger than the
maximum one.Only
the LTE supports
this function LOFD-003011 /
currently. NO YES No TDLOFD-003011
the peak burst
transmitted from the
transmission
resource group.The
LMPT can be
configured with a
maximum of 540
Mbit/s TX peak
burst size.The
UMPT can be
configured with a
maximum of 1
Gbit/s TX peak
burst size.The
value of TX peak
burst size is set to
the maximum value
of TX peak burst
size supported by
the board when it
Indicates the local

real-time traffic that
is transmitted in a
transmission
resource group.
The local traffic
includes only the
local traffic stream
exclusive of the
passing-by data
flow and non-traffic
stream.The
parameter takes
Indicates the local

real-time traffic that
is received in a
transmission
resource group.
The local traffic
includes only the
exclusive of the
passing-by data
stream.The
parameter takes
Indicates the local
that is transmitted
in a transmission
resource group.
The local traffic
includes only the
exclusive of the
passing-by data
stream.The
parameter takes
Indicates the local

that is received in a
transmission
resource group.
The local traffic
includes only the
exclusive of the
passing-by data
stream.The
parameter takes
Indicates the TX
bandwidth reserved
for non-real-time
services in a
transmission
resource group.The
parameter takes
Indicates the RX
bandwidth reserved
for non-real-time
services in a
transmission
resource group.The
parameter takes
Indicates the TX
bandwidth that is
already used by a
transmission
resource group. NO NO Yes None
Indicates the RX
bandwidth that are
already used by a
transmission
Indicates the RX
bandwidth that are
already used by a
transmission
Indicates the RX
bandwidth that are
already used by a
transmission
Indicates the GBR

service traffic that is
transmitted by the
transmission
resource group.The
parameter takes
Indicates the GBR

service traffic
received by the
transmission
resource group.The
parameter takes
Indicates the rate
configuration mode
of the transmission
Indicates the uplink

admission
bandwidth of the
transmission
resource group.The
parameter takes
Indicates the
downlink admission
bandwidth of the
transmission
resource group.The
parameter takes
Indicates the UL
Committed
Information Rate
(CIR) admission
bandwidth for the
transmission
resource group.The
parameter takes
Indicates the CIR
admission
bandwidth of the
transmission
resource group in
DL.The parameter
LTE. NO NO Yes None
Indicates the UL
PIR admission
bandwidth of the
transmission
resource group.The
parameter takes
Indicates the PIR

admission
bandwidth of the
transmission
resource group in
DL.The parameter
LTE. NO NO Yes None
Indicates the
realtime traffic sent
on a transmission
Indicates the
number of the
cabinet that houses
the board where a
transmission
resource group is
Indicates the
number of the
subrack that
houses the board
where a
transmission
resource group is
Indicates the
number of the slot
corresponding to
the board where a
transmission
resource group is
occupied. YES YES No None
Indicates the type
of sub-board on the
transmission group.
The eNodeB
currently does not
support
UNCHANNELLED_
COVERBOARD. YES YES No None

type of the
transmission group.
The eNodeB
currently does not
support ATM. YES NO No None
Indicates the type
of port where a
transmission
resource group is
carried. The
eNodeB currently
does not support
STM1, IMA, UNI, or
FRAATM. YES YES No None
Indicates the
number of the port
where the
transmission
resource group is
transmission
resource group.
When you add a
PPP link, an MP
group, an Ethernet
port, an Ethernet
trunk, or a tunnel,
the system
automatically
creates an
algorithm for the
transmission
resource group with
Transmission
Resource Group ID
set to
DEFAULTPORT(De
fault Port). When
you remove any of
the preceding
objects, the system LOFD-00301101 /
automatically TDLOFD-00301101
removes the LOFD-00301102 /
algorithm for the TDLOFD-00301102
Indicates whether
to enable traffic
shaping for a
transmission
resource group. If
this parameter is
set to ON, traffic
shaping is
performed
according to the TX
bandwidth so that
the transmit traffic
would not exceed
the capability of
downstream
routers, thus
avoiding
unnecessary packet
loss and
congestion. If this
parameter is set to
OFF, traffic shaping
is not performed
during data LOFD-00301102 /
transmission. NO NO No TDLOFD-00301102
resource group,This
parameter takes
effect only for the
resource groups to
which
ENODEBPATH or
GBTSPATH is
added.
set to ON, the TX
bandwidth is
adjusted according
to the network
performance and
dynamic bandwidth
adjustment
parameters (down
speed PLR
threshold and down
speed delay
threshold). The
network
performance is
monitored through
IP PM sessions,
which can be
enabled at the local
end or at the peer
end.
set to OFF, the TX
bandwidth is not
adjusted.
The NodeB
currently does not
support this LOFD-00301202 /
Indicates whether
to enable the
dynamic adjustment
of the RX
bandwidth of a
transmission
resource group.
set to ON, the RX
bandwidth is
adjusted according
to the network
performance and
dynamic bandwidth
adjustment
parameters (down
speed PLR
threshold and down
speed delay
threshold). The
network
performance is
monitored through
IP PM sessions,
which can be
enabled at the local
end or at the peer
end.
set to OFF, the RX
bandwidth is not
adjusted.
The NodeB
currently does not
Indicates the rate
downsizing packet
loss rate threshold
for bandwidth
adjustment. When
RXBWASW or
TXBWASW is set to
ON, the estimated
available transport
bandwidth is
reduced if the
packet loss rate
detected through IP
Performance
Monitoring (IP PM)
is higher than this
threshold. If the
packet loss rate
detected through IP
PM is lower than
this threshold, the
estimated available
transport bandwidth LOFD-00301202 /
is increased. NO NO No TDLOFD-00301202
Indicates the
threshold for delay
variation due to rate
reduction. When
RXBWASW or
TXBWASW is set to
ON, the estimated
available transport
bandwidth is
reduced if the delay
variation detected
by an IP PM
session is above
this threshold.The
NodeB currently
does not support LOFD-00301202 /
this function. NO NO No TDLOFD-00301202
Indicates the
minimum TX
bandwidth that
adjustments can
achieve. If the
RATECFGTYPE
(global rate
configuration type)
and TXBWASW (TX
bandwidth
adjustment switch)
parameters are set
to SINGLE_RATE
and ON,
respectively, the TX
bandwidth obtained
after each
adjustment is equal
to or larger than the
value of this LOFD-00301202 /
parameter. NO NO No TDLOFD-00301202
Indicates the
minimum RX
bandwidth that
adjustments can
achieve. If the
RATECFGTYPE
(global rate
configuration type)
and RXBWASW
(RX bandwidth
adjustment switch)
parameters are set
to SINGLE_RATE
and ON,
respectively, the RX
bandwidth obtained
after each
adjustment is equal
to or larger than the
congested, and
transmits the
backpressure
signals (number
and congestion
status of the
transmission
resource group) to
each flow control
service.
If the number of
data packets in the
buffer of any
backpressure
queue exceeds
75% of the queue
capacity, the BS
regards this
transmission
resource group as
congested and
transmits
congestion signals.
If the buffered back-
pressure packets
are less than 50%
of the total buffer
capacity, the BS
decides that the
transmission
resource group is
not congested. In
this situation, no
congestion signal or LOFD-00301101 /
congestion release TDLOFD-00301101
signal is LOFD-00301102 /
transmitted. NO NO No TDLOFD-00301102
transmission
resource group. If
this parameter is
set to ENABLE, the
OM FTP queue
participates the
decision of the
congestion status of
the transmission
resource group,
and the OM low-
level upload and
download data
preempts the
bandwidth of non-
real-time services. If
this parameter is
set to DISABLE, the
OM FTP queue
does not participate
the decision of the
congestion status of
the transmission
resource group,
and the OM low-
level upload and
download data
does not preempt
the bandwidth of
non-real-time
services. The
bandwidth of OM
low-level upload
and download data LOFD-00301101 /
is far smaller than TDLOFD-00301101
that of any other LOFD-00301102 /
service. NO NO No TDLOFD-00301102
Indicates the
number of Priority
Queues (PQs) in a
transmission
resource group.
The queues in a
transmission
resource group are
classified into PQs
and non-PQs. The
scheduling priority
of any PQ is higher
than that of any
non-PQ. There is
no Priority Queues
when this
parameter value is
0.The queues
numbered from 0 to
the result after this
parameter value
minus 1 are PQs.
PQ scheduling is
used between PQs.
A smaller PQ
number indicates a
higher scheduling
priority. The queues
numbered from this
parameter value to
6 are non-PQs.
Weight Round LOFD-00301101 /
Robin (WPR) TDLOFD-00301101
scheduling is used LOFD-00301102 /
between non-PQs. NO NO No TDLOFD-00301102
Indicates the
congestion time
threshold of a
transmission
resource group.
When TCSW is set
to ENABLE, if the
buffer time of non-
real-time service
data in a
transmission
resource group
exceeds the
threshold, it
indicates that the
transmission
resource group is
congested and the LOFD-00301101 /
backpressure TDLOFD-00301101
signals are LOFD-00301102 /
Indicates the
congestion clear
time threshold of a
transmission
resource group.
When TCSW is set
to ENABLE, if the
buffer time of non-
real-time service
data in a
transmission
resource group is
below the
threshold, it
indicates that the
transmission
resource group is
not congested and
therefore the LOFD-00301101 /
congestion clear TDLOFD-00301101
signals are LOFD-00301102 /
Indicates the TX
bandwidth reserved
for signaling or OM
data. This
parameter should
be set to a value
smaller than the TX
bandwidth of a
transmission
resource group.
The recommended
reserved TX
bandwidth is lower
than or equal to 3%
of the TX bandwidth
of a transmission
resource group.The LOFD-00301101 /
NodeB currently TDLOFD-00301101
does not support LOFD-00301102 /
this function. NO NO No TDLOFD-00301102
Indicates the
reserved RX
bandwidth, which
should be set to a
value smaller than
or equal to the RX
bandwidth of a
transmission
resource group.
The NodeB LOFD-00301101 /
currently does not TDLOFD-00301101
value indicates a
stronger capability.
set to 0, the queue
in a transmission
resource group
cannot buffer
packets, and thus
all the delayed
packets on the TX
channel are
discarded. The
number threshold of
discarded packets
determines the
maximum amount
of data that can be
buffered in a
transmission
resource group.
The congestion
time threshold of a
transmission
resource group
determines the
amount of data that
is buffered when
the transmission
resource group is
congested. Ensure
that the maximum
amount of data that
can be buffered is
not less than the
amount of data that
is buffered during LOFD-00301102 /
congestion. NO NO No TDLOFD-00301102

the SCTP host. YES YES No TDLOFD-002004
Indicates the index
and
forwarding(VRF)
Indicates the
version of the local
IP address of an
SCTP link. NO NO No None
Indicates the first

IPv4 address of the
sctp host, which is
used in automatic
setup of a Stream
Control
Transmission
Protocol (SCTP) LOFD-002004 /
link. NO YES No TDLOFD-002004
Indicates the first
IPv6 address of the
sctp host, which is
used in automatic
setup of a Stream
Control LBFD-003006 /
Transmission TDLBFD-003006
Indicates whether
to enable automatic
setup of an IPSec
tunnel between the
local end and the
peer end based on
the
SECURITYHOST
and
SECURITYPEER
MOs. The IPSec
tunnel is used to
encrypt the data to
be transmitted on
the Stream Control
Transmission
Protocol (SCTP)
link that is set up
using the first IP
address of the sctp
host or the data to
be transmitted on
the IPv6 SCTP link
that is set up using LOFD-002004 /
the first IPv6 TDLOFD-002004
address of the sctp LOFD-003009 /
host. NO NO No TDLOFD-003009
Indicates the ID of
the security host LOFD-002004 /
referenced by the TDLOFD-002004
first IP address of LOFD-003009 /
the SCTP host. NO YES No TDLOFD-003009
Indicates the
second IPv4
address of the sctp
host, which is used
in automatic setup
of a Stream Control
Transmission
link. NO NO No TDLOFD-002004
Indicates the
second IPv6
address of the sctp
host which is used
in automatic setup
of a Stream Control LBFD-003006 /
Indicates whether
to enable automatic
setup of an IPSec
tunnel between the
local end and the
peer end based on
the
SECURITYHOST
and
SECURITYPEER
MOs. The IPSec
tunnel is used to
encrypt the data to
be transmitted on
the Stream Control
Transmission
Protocol (SCTP)
link that is set up
using the second IP
address of the sctp
host or the data to
be transmitted on
the IPv6 SCTP link
the second IPv6 TDLOFD-002004
host. NO NO No TDLOFD-003009
Indicates the ID of
the security host LOFD-002004 /
second IP address LOFD-003009 /
of the SCTP host. NO YES No TDLOFD-003009
Indicates the
number of the local
SCTP port, which is
used in automatic
setup of a Stream
Control
Transmission
Indicates the ID of
the SCTP
parameters
template referenced
by the SCTP link
that is automatically LOFD-002004 /
set up. NO YES No TDLOFD-002004
Indicates the
SCTP host. NO NO No TDLOFD-002004
Indicates the
SCTP link. YES YES No TDLBFD-00202103
Indicates the
cabinet number of
the SCTP link. NO NO No None
Indicates the
subrack number of
the SCTP link. NO NO No None
Indicates the slot
number of the
SCTP link. NO YES No None
Indicates the
maximum stream
SCTP link. NO NO No TDLBFD-00202103
Indicates whether
the object can be
modified or deleted
by the system. The
value
MANUAL_MODE
means that only the
user can modify or
delete the object.
The value
AUTO_MODE
means that both the
system and the
user can modify or
Indicates the first

local IP address of LBFD-00202103 /
the SCTP link. NO YES No TDLBFD-00202103
Indicates the
second local IP
Indicates the local

port number of the LBFD-00202103 /
SCTP link. NO YES No TDLBFD-00202103
Indicates the first

peer IP address of LBFD-00202103 /
the SCTP link. NO YES No TDLBFD-00202103
Indicates the
second peer IP
Indicates the peer

port number of the LBFD-00202103 /
SCTP link. NO YES No TDLBFD-00202103
Indicates the
minimum
Retransmission
Timeout (RTO)
value for the SCTP
link. A smaller value
of this parameter
indicates a shorter
time required to
check link
connectivity. The
time required to
check link
connectivity is twice
the sum of the new
RTO and heartbeat
interval. The new
RTO ranges from
the minimum RTO
value to maximum LBFD-00202103 /
RTO value. NO NO No TDLBFD-00202103
Indicates the
maximum RTO
value of an SCTP
link. A larger value
indicates a longer
period required for
checking link LBFD-00202103 /
connectivity. NO NO No TDLBFD-00202103
RTO value of an
SCTP link. A larger
value indicates a
longer period
required for
checking link LBFD-00202103 /
connectivity. NO NO No TDLBFD-00202103
1) Until an RTT
measurement has
been made for a
packet sent to the
given destination
transport address,
set RTO to the
protocol parameter
'RTO.Initial'.
2) When the first
RTT measurement
R is made, set
SRTT = R, RTTVAR
= R/2, and RTO =
SRTT + 4 *
RTTVAR.
3) When a new RTT
measurement R' is
made, set RTTVAR
= (1 - RTO.Beta) *
RTTVAR +
RTO.Beta * |SRTT -
R'|, SRTT = (1 -
RTO.Alpha) * SRTT
+ RTO.Alpha * R'.
Note: The value of
SRTT used in the
update to RTTVAR
is its value before
updating SRTT
itself using the
second assignment.
After the
computation,
update RTO =
SRTT + 4 * LBFD-00202103 /
RTTVAR. NO NO No TDLBFD-00202103
1) After an RTT
measurement has
been made for a
packet sent to the
given destination
transport address,
set RTO to the
protocol parameter
'RTO.Initial'.
2) When the first
RTT measurement
R is made, set
SRTT = R, RTTVAR
= R/2, and RTO =
SRTT + 4 *
RTTVAR.
3) When a new RTT
measurement R' is
made, set RTTVAR
= (1 - RTO.Beta) *
RTTVAR +
RTO.Beta * |SRTT -
R'|, SRTT = (1 -
RTO.Alpha) * SRTT
+ RTO.Alpha * R'.
Note: The value of
SRTT used in the
update to RTTVAR
is its value before
updating SRTT
itself using the
second assignment.
After the
computation,
update RTO =
SRTT + 4 * LBFD-00202103 /
RTTVAR. NO NO No TDLBFD-00202103
Indicates the
heartbeat interval
for an SCTP link.
The heartbeat
check is
independently
initiated by each
end of an
association and
then confirmed by
the peer end
through the HB
ACK packet. When
no services are
carried, a link
disconnection is
determined if the
number of
heartbeat check
attempts reaches
the maximum
retransmission
attempts on an
association but the
HB ACK packet is
not received from LBFD-00202103 /
the peer end. NO NO No TDLBFD-00202103
Indicates the
maximum number
of retransmissions
for the SCTP
association. When
the number of
retransmissions for
the association
exceeds the value
of this parameter,
the SCTP link is
broken and a link
failure alarm is LBFD-00202103 /
reported. NO NO No TDLBFD-00202103
Indicates the
maximum number
of retransmissions
over a path. When
the number of
retransmissions
over a path
exceeds the value
of this parameter,
the path is regarded
as failed if no
heartbeat
acknowledgment is
received. If multiple
paths are used,
path switching is
automatically LBFD-00202103 /
performed. NO NO No TDLBFD-00202103
Indicates the type

of the checksum
algorithm.The
checksum
algorithms at both
ends of the SCTP
links must be the LBFD-00202103 /
same. NO NO No TDLBFD-00202103
Indicates whether
to switch back to
the primary path
when it is restored.
The SCTP link
switches to the
secondary path
when the primary
path cannot be
reached. If this
parameter is set to
ENABLE, the SCTP
link switches to the
primary path when
the primary path is
restored. If this
parameter is set to
DISABLE, the
SCTP link does not
switch to the
primary path when
the primary path is LBFD-00202103 /
restored. NO NO No TDLBFD-00202103
Indicates the
number of
heartbeats to be
detected before the
transmission
switches back to
the primary path.
After the primary
path is restored, the
transmission
switches back to
the primary path
when the number of
heartbeats detected LBFD-00202103 /
reaches this value. NO NO No TDLBFD-00202103

of the SCTP link. NO NO Yes None
Indicates the cause

of the latest change
that the operational
state of the SCTP
link transits from
available to
unavailable. NO NO Yes None
Indicates the time

that the operational
state of the SCTP
link transits from
available to
Indicates the
number of
outbound streams
negotiated for the
SCTP link. NO NO Yes None
Indicates the
number of inbound
streams negotiated
for the SCTP link. NO NO Yes None
Indicates the
working address
flag of the SCTP
Indicates whether
the SCTP link is LBFD-00202103 /
blocked or not. NO NO No TDLBFD-00202103
Indicates the time

interval that one
end of an SCTP link
has to wait before it
can send an SACK
message in
response to the
reception of data. A
parameter indicates
a longer time
interval between
the reception of
data and the
sending of the
corresponding LBFD-00202103 /
SACK message. NO NO No TDLBFD-00202103
Indicates the peer
description
information of the LBFD-00202103 /
Indicates whether
the object is
created by the
system.
MANUAL_CREATE
D means that the
by the user
manually.
AUTO_CREATED
means that the
Indicates the index
of a VRF instance.
The NodeB
currently supports
default routes
domain only (the
LBFD-003006 /
number of an IPv6 LOFD-003017 /
SCTP link. YES YES No TDLOFD-003017
Indicates the
number of streams LBFD-003006 /
supported TDLBFD-003006
simultaneously by LOFD-003017 /
an IPv6 SCTP link. NO NO No TDLOFD-003017
Indicates whether
the object can be
modified or deleted
by the system. The
value
MANUAL_MODE
means that only the
user can modify or
delete the object.
The value
AUTO_MODE
means that both the
system and the
user can modify or
Indicates the first LBFD-003006 /

local IPv6 address TDLBFD-003006
of an IPv6 SCTP LOFD-003017 /
second local IPv6 TDLBFD-003006
address of an IPv6 LOFD-003017 /
SCTP link. NO NO No TDLOFD-003017
Indicates the local

SCTP port number
of the IPv6 SCTP
link. This parameter
must be set to the
same value as that
of the peer SCTP
port number in the LBFD-003006 /
IPv6 SCTP link TDLBFD-003006
configured at the LOFD-003017 /
peer end. NO YES No TDLOFD-003017
Indicates the first LBFD-003006 /

peer IPv6 address TDLBFD-003006
of an IPv6 SCTP LOFD-003017 /

second peer IPv6 TDLBFD-003006
address of an IPv6 LOFD-003017 /
Indicates the peer
SCTP port number
of the IPv6 SCTP
must be set to the
same value as that
of the local SCTP
port number in the LBFD-003006 /
IPv6 SCTP link TDLBFD-003006
configured at the LOFD-003017 /
peer end. NO YES No TDLOFD-003017
Indicates the
minimum
Retransmission
Timeout (RTO)
value for the SCTP
IPv6 link. A smaller
value of this
a shorter time TDLBFD-003006
required to check LOFD-003017 /
link connectivity. NO NO No TDLOFD-003017
Indicates the
maximum RTO
value of an IPv6
SCTP link. A larger
value indicates a
longer period LBFD-003006 /
required for TDLBFD-003006
checking link LOFD-003017 /
connectivity. NO NO No TDLOFD-003017

RTO value of an
IPv6 SCTP link. A
larger value
indicates a longer LBFD-003006 /
period required for TDLBFD-003006
checking link LOFD-003017 /
connectivity. NO NO No TDLOFD-003017
Indicates the RTO

alpha value of an
IPv6 SCTP link. A
larger value
indicates less LBFD-003006 /
sensitivity to the link TDLBFD-003006
delay. For details, LOFD-003017 /
Indicates the RTO
beta value of an
IPv6 SCTP link. A
larger value
indicates more LBFD-003006 /
sensitivity to the link TDLBFD-003006
delay. For details, LOFD-003017 /
Indicates the
heartbeat interval
for an IPv6 SCTP
link. The heartbeat
check is
independently
initiated by each
end of an
association and
then confirmed by
the peer end
through the HB
ACK packet
indicating normal
link connection.
If the number of
heartbeat check
attempts reaches
the maximum
retransmission
attempts on an
association but the
HB ACK packet is
not received from LBFD-003006 /
the peer end, a link TDLBFD-003006
disconnection is LOFD-003017 /
determined. NO NO No TDLOFD-003017
Indicates the
maximum number
of association
retransmissions on
the IPv6 SCTP link.
If the number of
retransmissions
exceeds the value
of this parameter,
the SCTP link is LBFD-003006 /
broken and a link TDLBFD-003006
failure alarm is LOFD-003017 /
Indicates the
maximum number
of retransmissions
over a path of the
IPv6 SCTP link. If
no heartbeat
response is
received when the
number of
retransmissions
over a path
exceeds the value
of this parameter, it
indicates that the
current path cannot
be reached. If
multiple paths are
used on the IPv6 LBFD-003006 /
SCTP link, path TDLBFD-003006
switching is LOFD-003017 /
performed. NO NO No TDLOFD-003017
Indicates the type

of the checksum
algorithm.The
checksum
algorithms at both LBFD-003006 /
ends of the IPv6 TDLBFD-003006
SCTP links must be LOFD-003017 /
the same. NO NO No TDLOFD-003017
Indicates whether
to switch back to
the primary path
when the primary
path is restored.
The IPv6 SCTP link
switches to the
secondary path
when the primary
path cannot be
reached. This
parameter is used
to set whether an
IPv6 SCTP link
switches back to LBFD-003006 /
the primary path TDLBFD-003006
when the primary LOFD-003017 /
path is restored. NO NO No TDLOFD-003017
Indicates the
number of
heartbeats that are
detected before
transmission
smoothly switches
back from the
associated
secondary path to
the primary path.
After the associated
primary path is
restored,
transmission
smoothly switches
back from the
secondary path to
the primary path
when the number of
detected
successive LBFD-003006 /
heartbeats reaches TDLBFD-003006
this parameter LOFD-003017 /
value. NO NO No TDLOFD-003017

of the IPv6 SCTP
Indicates the cause

of the operational
state of an IPv6
SCTP link from
available to
Indicates the last
time when the
operational state of
an IPv6 SCTP link
changes from
available to
Indicates the
number of TX
streams negotiated
for an IPv6 SCTP
Indicates the
number of RX
streams negotiated
for an IPv6 SCTP
Indicates the
working address
flag of an IPv6
SCTP link. NO NO Yes None
LBFD-003006 /
the IPv6 SCTP link LOFD-003017 /
is blocked. NO NO No TDLOFD-003017
Indicates the peer LBFD-003006 /
description TDLBFD-003006
information of an LOFD-003017 /
IPv6 SCTP link. NO NO No TDLOFD-003017
Indicates whether
the object is
created by the
system.
MANUAL_CREATE
D means that the
by the user
manually.
AUTO_CREATED
means that the
Indicates the time
interval that one
end of an SCPT link
can send an SACK
message in
response to the
reception of certain
data. A larger value
of this parameter
indicates a longer
time interval
between the
reception of data
and the sending of
the corresponding
SACK message. NO NO No None

the SCTP peer. YES YES No TDLOFD-002004
Indicates the index

and
forwarding(VRF)
Indicates the
version of the peer
IP address of an LOFD-002004 /
Indicates the first
IPv4 address of the
peer end, which is
used in automatic
setup of a Stream
Control
Transmission
Indicates the first

IPv6 address of the
sctp peer, which is
used for
automatically
setting up a Stream
Indicates whether
to enable automatic
setup of an IPSec
tunnel between the
local end and the
peer end based on
the
SECURITYHOST
and
SECURITYPEER
MOs. The IPSec
tunnel is used to
encrypt the data to
be transmitted on
the Stream Control
Transmission
Protocol (SCTP)
link that is set up
using the first IP
address of the sctp
peer or the data to
be transmitted on
the IPv6 SCTP link
the first IPv6 TDLOFD-002004
peer. NO NO No TDLOFD-003009
Indicates the ID of
the security peer LOFD-002004 /
first IP address of LOFD-003009 /
the SCTP peer. NO YES No TDLOFD-003009
Indicates the
second IP address
of the sctp peer,
which is used for
automatically
setting up a Stream
Control
Transmission
Indicates the
second IPv6
address of the sctp
peer, which is used
for automatically
setting up a Stream
Indicates whether
to enable automatic
setup of an IPSec
tunnel between the
local end and the
peer end based on
the
SECURITYHOST
and
SECURITYPEER
MOs. The IPSec
tunnel is used to
encrypt the data to
be transmitted on
the Stream Control
Transmission
Protocol (SCTP)
link that is set up
using the second IP
address of the sctp
peer or the data to
be transmitted on
the IPv6 SCTP link
the second IPv6 TDLOFD-002004
peer. NO NO No TDLOFD-003009
Indicates the ID of
the security peer LOFD-002004 /
second IP address LOFD-003009 /
of the SCTP peer. NO YES No TDLOFD-003009
Indicates the
number of the peer
SCTP port, which is
used in automatic
setup of a Stream
Control
Transmission
This parameter
indicates the
remote ID and
the SCTPPEER MO
that is automatically
created during X2
self-setup. This
parameter is
automatically
configured during
X2 self-setup and is
used to identify the
peer eNodeB. The
parameter value is
displayed as
follows:
eNB:MCC_'The
MCC of the serving
operator on the
local eNodeB'
MNC_'The MNC of
the serving operator
on the local
eNodeB'
GlobaleNBId_'The
global MCC of the
peer eNodeB'-'The
global MNC of the
peer eNodeB'-'The LOFD-002004 /
peer eNodeB ID'. NO NO No TDLOFD-002004
Indicates whether
the object can be
modified or deleted
by the system. The
value
MANUAL_MODE
means that only the
user can modify or
delete the object.
The value
AUTO_MODE
means that both the
system and the
user can modify or LOFD-002004 /
delete the object. NO NO No TDLOFD-002004
Indicates whether
the object is
created by the
system.
MANUAL_CREATE
D means that the
by the user
manually.
AUTO_CREATED
means that the
object is created by LOFD-002004 /
the system. NO NO No TDLOFD-002004
Indicates the
SCTP peer. NO NO No TDLOFD-002004
Indicates the ID of
the SCTP
parameter LOFD-002004 /
template. YES YES No TDLOFD-002004
Indicates the
minimum value of
the retransmission
timeout (RTO).
According to the
SCTP protocol, if
the calculated RTO
is less than this
parameter value,
the round trip delay
is set to this
parameter value to
reduce the
probability of
retransmission LOFD-002004 /
timeout. NO NO No TDLOFD-002004
Indicates the
maximum value of
the retransmission
timeout (RTO).
According to the
SCTP protocol, it is
the upper limit for
the doubling
operation of the
timeout timer. NO NO No TDLOFD-002004

value of the
Retransmission
TimeOut (RTO). It is
used as the initial
value when
calculating the
retransmission
timeout in the SCTP LOFD-002004 /
protocol. NO NO No TDLOFD-002004
Indicates the alpha
value related to
RTO of the SCTP
link. The larger the
parameter value,
the more insensitive
services to the link
delay. For details
about the RtoAlpha
parameter, see
RFC4960. The
parameter value is
used as smooth
factor for
calculating the
round-trip delay in
the SCTP protocol.
In a new estimation,
(RtoAlpha/100) is
obtained based on
a new
measurement and
1-(RtoAlpha/100) is
obtained based on LOFD-002004 /
the last estimation. NO NO No TDLOFD-002004
Indicates the beta

value related to
RTO of the SCTP
is used to calculate
the Round Trip
Time Variation
(RTTVAR). A larger
value indicates that
the latest change is
more important. For
definitions of the
beta value, see LOFD-002004 /
Indicates the
heartbeat interval,
corresponding to
the HBINTER
parameter specified
in RFC4960. SCTP
periodically
transmits heartbeat
messages to an idle
destination address
to detect the
reachability.
According to
RFC4960, the
actual interval at
which heartbeat
messages are
transmitted equals
the parameter value
(HBINTER) plus the
timeout (RTO). NO NO No TDLOFD-002004
Indicates the
maximum number
of retransmissions
on the SCTP link. If
the number of
retransmissions on
the SCTP link
reaches this
parameter value,
this SCTP link is
considered broken
and the eNodeB
reports a link failure LOFD-002004 /
alarm. NO NO No TDLOFD-002004
Indicates the
maximum number
of retransmissions
over a path. When
the number of
retransmissions
over a path
exceeds the value
of this parameter,
the path is regarded
as failed if no
heartbeat
acknowledgment is
received. If multiple
paths are used,
path switching is
automatically LOFD-002004 /
Indicates whether
to switch back to
the primary path
upon restoration of
the primary path. If
the primary path is
unavailable, the
SCTP link will be
switched to the
secondary path.
When this
parameter is set to
ENABLE and the
primary path is
restored, the SCTP
link will be switched
to the primary path.
When this
parameter is set to
DISABLE and the
primary path is
restored, the SCTP
link will not be
switched to the LOFD-002004 /
primary path. NO NO No TDLOFD-002004
Indicates the
number of
consecutive
heartbeat
messages that
must be transmitted
on the primary path
before the system
can switch back to
the primary path
when
SWITCHBACKFLA
G is set to LOFD-002004 /
ENABLE. NO NO No TDLOFD-002004
Indicates the time
interval that one
end of SCPT link
can send an SACK
message in
response to data
reception. A larger
value of this
parameter indicates
a longer time
interval between
the reception of
data and the
sending of the
SACK message. NO NO No TDLOFD-002004
Indicates the type

of the checksum
algorithm. The
checksum
algorithms at both
ends of SCTP links LOFD-002004 /
must be the same. NO NO No TDLOFD-002004
Indicates the
maximum stream
number of an SCTP LOFD-002004 /
LOFD-002004 /
TDLOFD-002004
security host ID. YES YES No TDLOFD-003009
Indicates whether
to enable the peer
end to perform
IPSec negotiation
with the local end
through an SeGW.
When this
parameter is set to
DISABLE, the peer
end performs IPSec
local end directly.
When this
parameter is set to
ENABLE, the peer
end establishes an LOFD-002004 /
IPSec tunnel to the TDLOFD-002004
peer end through a LOFD-003009 /
SeGW. NO NO No TDLOFD-003009

configuration mode TDLOFD-002004
of the security LOFD-003009 /
gateway. NO NO No TDLOFD-003009

version of the TDLOFD-002004
security host IP LOFD-003009 /
address. NO NO No TDLOFD-003009
This parameter is
used to designate LOFD-002004 /
the physical port of TDLOFD-002004
the IPSec Policy LOFD-003009 /
Group Binding. NO YES No TDLOFD-003009
This parameter is
used to designate
the physical port of LBFD-003006 /
the IPv6 IPSec TDLBFD-003006
Policy Group LOFD-002004 /
Binding. This TDLOFD-002004
parameter takes LOFD-003024 /
effect only in LTE. NO YES No TDLOFD-003024
LOFD-002004 /
TDLOFD-002004
of the IKE peer. NO YES No TDLOFD-003009
Indicates the name

of the IPSec
proposal used for
IPSec negotiation
between the local LOFD-002004 /
end and the TDLOFD-002004
security gateway LOFD-003009 /
(SeGW). NO YES No TDLOFD-003009
Indicates the ID of
the security LOFD-002004 /
parameter template TDLOFD-002004
referenced by the LOFD-003009 /
security host. NO YES No TDLOFD-003009
LOFD-002004 /
Indicates the TDLOFD-002004
security host. NO NO No TDLOFD-003009
LOFD-002004 /
TDLOFD-002004
Indicates the ID of a LOFD-003009 /
security peer. YES YES No TDLOFD-003009
Indicates whether
to enable the peer
end to perform
IPSec negotiation
with the local end
through an SeGW.
When this
parameter is set to
DISABLE, the peer
end performs IPSec
local end directly.
When this
parameter is set to
ENABLE, the peer
local end through LOFD-003009 /
the SeGW. NO NO No TDLOFD-003009

version of the TDLOFD-002004
security peer IP LOFD-003009 /
LOFD-002004 /
Indicates the IPv4 TDLOFD-002004
address of the IKE LOFD-003009 /
peer. NO YES No TDLOFD-003009
Indicates the IPv6

address of the IKE
peer that LBFD-003006 /
corresponds to a TDLBFD-003006
service IP address. LOFD-002004 /
This parameter TDLOFD-002004
Indicates the name
of the IKE peer. The
IKE peer is the
that performs IKE TDLOFD-002004
negotiation with the LOFD-003009 /
local end. NO YES No TDLOFD-003009
Indicates the name

of the IPSec
proposal used for
IPSec negotiation
between the local LOFD-002004 /
end and the TDLOFD-002004
(SeGW). NO YES No TDLOFD-003009
Indicates whether
the object can be
modified or deleted
by the system. The
value
MANUAL_MODE
means that only the
user can modify or
delete the object.
The value
AUTO_MODE
means that both the LOFD-002004 /
system and the TDLOFD-002004
LOFD-002004 /
description of a LOFD-003009 /
security peer. NO NO No TDLOFD-003009
Indicates whether
the object is
created by the
system.
MANUAL_CREATE
D means that the
by the user
manually.
AUTO_CREATED LOFD-002004 /
means that the TDLOFD-002004
the security TDLOFD-002004
template. YES YES No TDLOFD-003009
Indicates whether
to enable the peer
end to perform
IPSec negotiation
with the local end
through an SeGW.
When this
parameter is set to
DISABLE, the peer
end performs IPSec
local end directly.
When this
parameter is set to
ENABLE, the peer
local end through LOFD-003009 /
the SeGW. NO NO No TDLOFD-003009
LOFD-002004 /
TDLOFD-002004
the IKE proposal. NO YES No TDLOFD-003009
LOFD-002004 /
Indicates the name TDLOFD-002004
proposal. NO YES No TDLOFD-003009
LOFD-002004 /
TDLOFD-002004
protocol version. NO NO No TDLOFD-003009
Indicates the IKE

V1 exchange mode.
There are two
exchange modes:
main mode and
aggressive mode.
In main mode, keys
are exchanged
separately from
identity information,
which protects
and hence
enhances security.
In aggressive
mode, identity
information is not
protected, but
requirements of LOFD-002004 /
specific network TDLOFD-002004
environments can LOFD-003009 /
be met. NO NO No TDLOFD-003009
Indicates the
preshared key. Both LOFD-002004 /
ends must use the TDLOFD-002004
same preshared LOFD-003009 /
key in negotiation. NO NO No TDLOFD-003009
Indicates whether
to enable the dead
peer detection
(DPD) function.
When this
parameter is set to
DISABLE, the local
end does not
perform DPD.
When this
parameter is set to
PERIODIC, the
local end
periodically sends
DPD packets to
perform DPD if the
total time during
which the local end
does not receive
encrypted packets
reaches the value LOFD-002004 /
specified by the TDLOFD-002004
DPD Idle Time LOFD-003009 /
Indicates the dead

peer detection
(DPD) idle time. If
the local end does
not receive
encrypted packets
for a time defined
by this parameter, it
sends a DPD
message to perform
dead peer
detection. However,
the exact time at
which the eNodeB
sends DPD
messages varies LOFD-002004 /
depending on TDLOFD-002004
network LOFD-003009 /
environment. NO NO No TDLOFD-003009
Indicates the
eNodeB sends
DPD frames.
However, the exact
eNodeB sends
DPD frames varies LOFD-002004 /
depending on TDLOFD-002004
network LOFD-003009 /
environment. NO NO No TDLOFD-003009
Indicates the
maximum allowed
number of DPD
frame
retransmissions LOFD-002004 /
after a dead peer TDLOFD-002004
detection (DPD) LOFD-003009 /
failure. NO NO No TDLOFD-003009
each other.
According to PFS,
each key protects a
unique set of data.
The elements used
to generate a key
cannot be reused,
preventing the
disclosure of a key
from affecting
security of other
keys.
If the parameter is
set to
PFS_GROUP1 or
PFS_GROUP2 at
the local end, the
peer end must
launch a PFS
exchange when
initiating IPSec
negotiation. In this
situation, both ends
must use the same
Diffie-Hellman (DH)
group to calculate
the key; otherwise,
negotiation fails.
Compared with the
768-bit DH group
(DH group 1), the
1024-bit DH group
(DH group 2)
provides a higher LOFD-002004 /
security level but TDLOFD-002004
requires longer LOFD-003009 /
calculation time. NO NO No TDLOFD-003009
Indicates the
configuration mode
of the IPSec SA's
life cycle. This
parameter can be
set to GLOBAL or
LOCAL. The value
GLOBAL means
that this life cycle
applies to all IPSec
SAs of the system,
while the value
LOCAL means that
this life cycle
applies only to the
IPSec SAs
generated using the LOFD-002004 /
IPSec proposal TDLOFD-002004
specified in the LOFD-003009 /
same MO. NO NO No TDLOFD-003009
Indicates the life

cycle of an IPSec
SA. An IPSec SA
becomes invalid
when its life cycle
elapses. Before an
IPSec SA becomes
invalid, IKE
establishes a new
IPSec SA based on
negotiation. Before
a new IPSec SA is
established, the old
IPSec SA is still
used to ensure
communication
security. Once the
negotiation is
complete, the new
IPSec SA is
immediately used.
IPSec SA
negotiation takes a
period of time. To
prevent SA update
from affecting
communication
security, a life cycle LOFD-002004 /
longer than 900 TDLOFD-002004
seconds is LOFD-003009 /
volume threshold
for the IPSec policy,
above which
negotiation for a
new IPSec SA is
started. The value 0
indicates that the
function, which
for a new IPSec SA
But when BS acts
to 0, if the
enforces the IPSec
BS, BS will enable LOFD-002004 /
this function to TDLOFD-002004
avoid service break LOFD-003009 /
down. NO NO No TDLOFD-003009

the IPSec packet
anti-replay window.
parameter is set to
0, the IPSec packet
anti-replay function
is disabled. If the
value of this
parameter is set to
32, 64, 128, 256,
512, 1024, 2048 or
4096, the system
checks whether the
packets are
duplicate in the
window. A packet is
discarded if it has a
duplicate packet or
its sequence
number is smaller
than any packet in
the window. The
window slides if the
sequence number
of the packet is
larger than any LOFD-002004 /
packet that is TDLOFD-002004
received in the LOFD-003009 /
window. NO NO No TDLOFD-003009
Indicates the
cabinet number of
the board where the
sub-interface is
Indicates the
subrack number of
the board where the
sub-interface is
Indicates the slot
number of the
board where the
sub-interface is
Indicates the
subboard type of
the board where the
sub-interface is
Indicates the
number of the sub-
interface. YES YES No None
Indicates the port

type. NO YES No None
Indicates the port

number. NO YES No None
Indicates the index
and
forwarding(VRF). NO NO No None
Indicates whether
to enable the proxy
ARP function. NO NO No None
Indicates the
source IP address
used for mapping LBFD-003003 /
the VLAN. YES YES No TDLBFD-003003
Indicates the
subnet mask of the
source IP address
the VLAN. YES YES No TDLBFD-003003
Indicates the VLAN LBFD-003003 /

ID in the VLAN tag. NO YES No TDLBFD-003003
Indicates the switch
that is used to
control whether to
apply UL admission
control to a LOFD-00301101 /

that is used to
control whether to
apply DL admission
control to a LOFD-00301101 /
Indicates the UL
admission threshold
for handed-over
services. A large
value of this
parameter will result
in a high UL
admission success
rate of handed-over LOFD-00301101 /
services. NO NO No TDLOFD-00301101
Indicates the DL
admission threshold
for handed-over
services. A large
value of this
in a high DL
admission success
rate of handed-over LOFD-00301101 /
Indicates the UL
admission threshold
for new Gold-level
services. A large
value of this
in a high UL
admission success
rate of new Gold- LOFD-00301101 /
level services. NO NO No TDLOFD-00301101
Indicates the DL
admission threshold
for new Gold-level
services. A large
value of this
in a high DL
admission success
rate of new Gold- LOFD-00301101 /
Indicates the UL
admission threshold
for new Silver-level
services. A large
value of this
in a high UL
admission success
rate of new Silver- LOFD-00301101 /
Indicates the DL
admission threshold
for new Silver-level
services. A large
value of this
in a high DL
admission success
rate of new Silver- LOFD-00301101 /
Indicates the UL
admission threshold
for new Copper-
level services. A
large value of this
parameter will
results in a high UL
admission success
rate of new Copper- LOFD-00301101 /
Indicates the DL
admission threshold
for new Copper-
level services. A
large value of this
in a high DL
admission success
rate of new Copper- LOFD-00301101 /
transport admission
threshold for the
Guaranteed the Bit
Rate (GBR) service.
A large value of this
in a high UL
admission success
rate of GBR LOFD-00301101 /
Indicates the DL
admission threshold
for the guaranteed
bit rate (GBR)
service. A large
value of this
in a high DL
admission success
rate of GBR LOFD-00301101 /
that is used to
control whether to
enable the UL pre-
emption algorithm.
set to ON, the UL
pre-emption
algorithm is
enabled. In this
case, the service
with a higher priority
that requests
admission may pre-
empt the resources
of admitted services
with lower priorities
when UL
transmission
bandwidth is
insufficient. If this
parameter is set to
OFF, the UL pre-
emption algorithm is
disabled. In this
case, services with
higher priorities that
request admission
cannot pre-empt
the resources of
admitted services
when UL
transmission
bandwidth is LOFD-00301101 /
insufficient. NO NO No TDLOFD-00301101
that is used to
control whether to
enable the DL pre-
emption algorithm.
set to ON, the DL
pre-emption
algorithm is
enabled. In this
case, the service
that requests
admission can pre-
empt the resources
of admitted services
when DL
transmission
bandwidth is
insufficient. If this
parameter is set to
OFF, the DL pre-
emption algorithm is
disabled. In this
case, services with
higher priorities that
request admission
cannot pre-empt
the resources of
admitted services
when DL
transmission
bandwidth is LOFD-00301101 /
insufficient. NO NO No TDLOFD-00301101
that is used to
control whether to
enable UL
overbooking
admission control. It
is used to
determine the
admission
bandwidth of the
resource group and
facilitate admission LOFD-00301101 /
control. NO NO No TDLOFD-00301101
that is used to
control whether to
enable DL
overbooking
admission control. It
is used to
determine the
admission
bandwidth of the
resource group and
facilitate admission LOFD-00301101 /
control. NO NO No TDLOFD-00301101

that is used to
control whether to
apply UL admission
control to a physical
port. If this
parameter is set to
ON, UL admission
control is applied to
the physical port. If
this parameter is
set to OFF, UL
admission control is
not applied to the LOFD-00301101 /
physical port. NO NO No TDLOFD-00301101
that is used to
control whether to
apply DL admission
control to a physical
port. If this
parameter is set to
ON, DL admission
control is applied to
the physical port. If
this parameter is
set to OFF, DL
admission control is
not applied to the LOFD-00301101 /
physical port. NO NO No TDLOFD-00301101
Indicates the
threshold for
triggering the UL
high load. If the
ratio of the UL
transport load to the
UL transport
bandwidth of the
BS keeps above
this threshold for a
period of
hysteresis, the UL
transport load of the
BS enters the high-
load state. In UL
high-load state, the
BS sends a UL S1
TNL Load Indicator,
which is set to
HighLoad, to each
neighboring BS
through the X2 LOFD-001032 /
interface. NO NO No TDLOFD-001032
Indicates the
threshold for
triggering the DL
high load. If the
ratio of the DL
DL transport
bandwidth of the
BS keeps above
period of
hysteresis, the DL
BS enters the high-
load state. In DL
high-load state, the
BS sends a DL S1
TNL Load Indicator,
which is set to
HighLoad, to each
neighboring BS
Indicates the
threshold for
clearing the UL high
load. If the ratio of
the UL transport
load to the UL
transport bandwidth
of the BS keeps
below this threshold
for a period of
hysteresis, the UL
BS enters the
medium-load state.
In UL medium load
state, the BS sends
a UL S1 TNL Load
Indicator, which is
set to MediumLoad,
to each neighboring
BS through the X2 LOFD-001032 /
Indicates the
threshold for
clearing the DL high
load. If the ratio of
the transport load to
the transmission
bandwidth in DL of
the BS keeps below
period of time, the
DL transport load of
the BS enters the
medium-load state.
In DL medium-load
state, the BS sends
a DL S1 TNL Load
Indicator, which is
set to MediumLoad,
to each neighboring
Indicates the
threshold for
triggering the UL
medium load. If the
ratio of the UL
UL transport
bandwidth of the
BS is above this
threshold, the UL
BS enters the
medium-load state.
In UL medium-load
state, the BS sends
a UL S1 TNL Load
Indicator, which is
set to MediumLoad,
to each neighboring
Indicates the
threshold for
triggering the DL
medium load. If the
ratio of the DL
DL transport
bandwidth of the
BS is above this
threshold, the DL
BS enters the
medium-load state.
In DL medium-load
state, the BS sends
a DL S1 TNL Load
Indicator, which is
set to MediumLoad,
to each neighboring
Indicates the
threshold for
clearing the UL
medium load. If the
ratio of the UL
UL transport
bandwidth of the
BS is below this
threshold, the UL
BS enters the low-
load state. In UL
low-load state, the
BS sends a UL S1
TNL Load Indicator,
which is set to
LowLoad, to each
neighboring BS
Indicates the
threshold for
clearing the DL
medium load. If the
ratio of the DL
DL transport
bandwidth of the
BS is below this
threshold, the DL
BS enters the low-
load state. In DL
low-load state, the
BS sends a DL S1
TNL Load Indicator,
which is set to
LowLoad, to each
neighboring BS
function of clearing
faults on a
transmission link. If
this parameter is
set to ENABLE, a
BS attempts to
clear a fault by
means of automatic
reset when the BS
cannot be
maintained (OMCH
of the BS is
disconnected) and
service interruption
duration reaches 45
minutes. If the fault
fails to be cleared,
the BS attempts to
clear the fault again
in the same way
when the service
interruption duration
reaches 480
minutes. If the fault
fails to be cleared
after the two resets,
the BS stops
performing
automatic reset.
The service
interruption duration
at which the BS
automatically resets
has fixed values (45
minutes and 480
minutes) and is not
configurable. NO NO No None
Indicates the UL
Over Load Control
(OLC) algorithm
switch. In the case
of enabled switch,
the bandwidth of
the services with
low priority would
be released to
guarantee the QoS
of the services of
high priority when
the TX bandwidth
changes or during
the overload
caused by real-time LOFD-00301103 /

for the DL OLC
algorithm. If this
parameter is set to
ON, bandwidth of
the services of a
low priority is
released to
guarantee the QoS
of the services of a
high priority when
transport bandwidth
changes or
overload occurs
due to increased
load of non-flow LOFD-00301103 /
control services. NO NO No TDLOFD-00301103
Indicates the
threshold for
triggering the UL
OLC. When the UL
bandwidth
occupancy reaches
the threshold, low-
priority services are
removed to
guarantee the
quality of high- LOFD-00301103 /
priority services. NO NO No TDLOFD-00301103
Indicates the
threshold for
clearing the UL
OLC. When the UL
bandwidth
occupancy is below
this threshold, user
services are no LOFD-00301103 /
longer removed. NO NO No TDLOFD-00301103
Indicates the
number of released
services during an LOFD-00301103 /
OLC action period. NO NO No TDLOFD-00301103
Indicates the
threshold for
triggering the DL
OLC. When the DL
bandwidth
occupancy reaches
the threshold, low-
priority services are
removed to
guarantee the
quality of high- LOFD-00301103 /
priority services. NO NO No TDLOFD-00301103
Indicates the
threshold for
clearing the DL
OLC. When the DL
bandwidth
occupancy is below
this threshold, user
services are no LOFD-00301103 /
longer removed. NO NO No TDLOFD-00301103
Indicates the
number of the
source cabinet MRFD-231501
where the tunnel is LOFD-003002 /
configured. YES NO No TDLOFD-003002
Indicates the
number of the
source subrack MRFD-231501
configured. YES NO No TDLOFD-003002
Indicates the
number of the
source slot where MRFD-231501
the tunnel is LOFD-003002 /
MRFD-231501
Indicates the index LOFD-003002 /
of the tunnel. YES YES No TDLOFD-003002
Indicates the
number of the
destination cabinet MRFD-231501
located. NO YES No TDLOFD-003002
Indicates the
number of the
destination subrack MRFD-231501
Indicates the
number of the
destination slot MRFD-231501
MRFD-231501
Indicates the type LOFD-003002 /
of the tunnel. NO NO No TDLOFD-003002
Indicates the
number of bytes
received through
the tunnel. NO NO Yes None
number of packets
received through a
tunnel. NO NO Yes None
number of bytes
sent through the
number of packets
sent through the
Indicates the UDP
session number. YES YES No None
Indicates the
cabinet number of
the board where the
UDP session is
Indicates the
subrack number of
the board where the
UDP session is
Indicates the slot

number of the
board where the
UDP session is
Indicates the local

IP address. The
local IP address
must be the
configured IP
address on the
board, such as the
Ethernet port IP
address, or logical
IP address. The
maintenance
Ethernet port
cannot be used. NO YES No None
Indicates the peer

IP address. The IP
address cannot be
0.0.0.0, broadcast
IP address,
multicast IP
address, loopback
IP address, or any
existing IP address
in the system. NO YES No None
Indicates the
priority of a
differentiated
services code point
(DSCP). The
priority has a
with the value of
this parameter. NO NO No None
Indicates the
statistics of the
UDPECHO
response
messages,
including RTT
information. NO NO Yes None
Indicates the
interval at which
UDP session
detection packets
are sent. NO NO No None
Indicates the
number of UDP
ping packet
timeouts. If the
number of UDP
ping timeouts is
greater than the
number of detection
packets, the UDP
session detection is
faulty. NO NO No None
Indicates the UDP

session status. If
the UDP session
detects interruption,
the status is
abnormal. NO NO Yes None
Indicates the
number of the user
data type.Numbers
1~9 are standard
user data types,
which are
automatically
configured by the
BS. Numbers
10~254 are
extended user data
types. YES YES No None
Indicates the ID of
the transport
parameter group
related to the
services
corresponding to an
QCI.User data type
numbers 1~9
correspond to user
data type transfer
parameter group
IDs 40~48, which
are automatically
configured by the
BS. NO YES No None
Indicates the ID of
the transport
parameter group
related to the
service that
corresponds to the
QCI. It uniquely
identifies a
transport parameter
group.User data
type numbers 1~9
correspond to user
data type transfer
parameter group
IDs 40~48, which
are automatically
configured by the
BS. YES YES No None
Indicates the rule

for prioritizing traffic
to meet service
requirements. If this
parameter is set to
IPPRECEDENCE,
the protocol stack
of the earlier
version is adopted,
which firstly
converts a Type of
Service (TOS) to a
DSCP and then
prioritizes traffic. NO NO No None
Indicates the
priority of the
service data, which
is identified by a
DSCP value. The
priority of the
service data has a
with the DSCP
value. NO YES No None
Indicates the
activity factor of the
services
corresponding to an
QCI. NO NO No None
Indicates the type

of primary transport
resource used to
transmit the user
date when hybrid
transmission is
adopted. HQ
indicates that high-
quality transport
resources are used,
while LQ indicates
that low-quality
transport resources
are used. When a
new service
requests admission
and admission
control is
performed, one of
the IP path routes
with transport
resources of the
same quality is
used as the primary
transport path. NO YES No None
Indicates the
primary port load
threshold of the
user data in the
hybrid transmission
scenario. A larger
services are more
likely to be admitted
to the primary path. NO YES No None
Indicates the
primary-to-
secondary port load
ratio threshold of
user data in the
hybrid transmission
scenario. A smaller
services are more
likely to be admitted
to the primary path. NO YES No None

the user-plane host. YES YES No TDLOFD-002004
Indicates the index

and
forwarding(VRF)
Indicates the
version of the user-
plane host IP LOFD-002004 /
Indicates the IP
Address of the user LOFD-002004 /
plane host. NO YES No TDLOFD-002004
Indicates the IPv6

Address of the user LBFD-003006 /
plane host. This TDLBFD-003006
Indicates whether
to enable automatic
setup of an IPSec
tunnel between the
local end and the
peer end based on
the
SECURITYHOST
and
SECURITYPEER
MOs. The IPSec
tunnel is used to
encrypt the data to LOFD-002004 /
be transmitted on TDLOFD-002004
the internal user LOFD-003009 /
plane paths. NO NO No TDLOFD-003009

security host ID TDLOFD-002004
used by the user- LOFD-003009 /
plane host. NO YES No TDLOFD-003009
Indicates the
description of the
user-plane local LOFD-002004 /
device. NO NO No TDLOFD-002004
Indicates the ID of
the user-plane peer. YES YES No None
Indicates the index

and
forwarding(VRF)
Indicates the
version of the user-
plane peer IP LOFD-002004 /
Indicates the IP
Address of the user LOFD-002004 /
plane peer. NO YES No TDLOFD-002004
Indicates the IPv6
Address of the user LBFD-003006 /
plane peer. This TDLBFD-003006
Indicates whether
to enable automatic
setup of an IPSec
tunnel between the
local end and the
peer end based on
the
SECURITYHOST
and
SECURITYPEER
MOs. The IPSec
tunnel is used to
encrypt the data to LOFD-002004 /
be transmitted on TDLOFD-002004
the internal user LOFD-003009 /
plane paths. NO NO No TDLOFD-003009

security peer ID TDLOFD-002004
used by the user- LOFD-003009 /
plane peer. NO YES No TDLOFD-003009
This parameter
indicates the
remote ID and
the
USERPLANEPEER
MO that is
automatically
created during X2
self-setup. This
parameter is
automatically
configured during
X2 self-setup and is
peer eNodeB. The
parameter value is
displayed as
follows:
eNB:MCC_'The
MCC of the serving
operator on the
local eNodeB'
MNC_'The MNC of
the serving operator
on the local
eNodeB'
GlobaleNBId_'The
global MCC of the
peer eNodeB'-'The
global MNC of the
peer eNodeB'-'The LOFD-002004 /
peer eNodeB ID'. NO NO No TDLOFD-002004
Indicates whether
the object can be
modified or deleted
by the system. The
value
MANUAL_MODE
means that only the
user can modify or
delete the object.
The value
AUTO_MODE
means that both the
system and the
Indicates whether
the object is
created by the
system. The value
MANUAL_CREATE
D means that the
by the user. The
value
AUTO_CREATED
means that the
Indicates the
information of the
user-plane peer LOFD-002004 /
device. NO NO No TDLOFD-002004
Indicates the VLAN

group that the
added VLAN
mapping belongs
to. Multiple VLAN
groups are used in
the scenario in
which telecom
operators share
transport resources
and use different LBFD-003003 /
VLAN policies. YES NO No TDLBFD-003003
type. Traffic of
different types is
transmitted through
different VLANs.
High-priority OM
data includes the
data of NTP/SNTP,
remote
maintenance
channel switchover,
and TCP (excluding
that related to FTP).
Low-priority OM
data includes the
data of the File
Transfer Protocol
(FTP) service.
Other data refers to
the data except the
user data,
signaling, high-
priority OM data,
and low-priority OM LBFD-003003 /
data. YES YES No TDLBFD-003003
Indicates the DSCP LBFD-003003 /

priority of user data. YES NO No TDLBFD-003003
Indicates the VLAN

ID that the service LBFD-003003 /
data belongs to. NO NO No TDLBFD-003003
Indicates the VLAN

priority. A greater
parameter value
denotes a higher LBFD-003003 /
priority. NO NO No TDLBFD-003003
Indicates the index

of a VRF instance.
The NodeB
currently supports
default routes
domain only (the
Indicates the next
hop IP address
used for mapping
the VLAN. YES YES No None
Indicates the
subnet mask of the
next hop IP address
the VLAN. YES NO No TDLBFD-003003
Indicates the VLAN

mode. When this
parameter is set to
SINGLEVLAN, the
configured VLAN ID
and VLAN priority
can be directly used
to label the VLAN
tag.
set to
VLANGROUP, the
next hop IP
addresses are
mapped to the
VLAN groups, and
then mapped to the
VLAN tags in the
VLAN groups
according to the
DSCPs of the IP
packets. In VLAN
group mode,
ensure that the
VLAN groups have
been configured by
running the ADD
VLANCLASS
command.
Otherwise, the
configuration does LBFD-003003 /
not take effect. NO YES No TDLBFD-003003
ID in the VLAN tag. NO NO No TDLBFD-003003


group number. NO NO No TDLBFD-003003
command.
The default
mapping between
DSCP and VLAN
priority is as follows:
If the DSCP is
within the range
from 0 to 7, the
default priority is 0;
If the DSCP is
within the range
from 8 to 15, the
If the DSCP is
within the range
from 16 to 23, the
If the DSCP is
within the range
from 24 to 31, the
If the DSCP is
within the range
from 32 to 39, the
If the DSCP is
within the range
from 40 to 47, the
If the DSCP is
within the range
from 48 to 55, the
If the DSCP is
within the range
from 56 to 63, the LBFD-003003 /
default priority is 7. NO NO No TDLBFD-003003
Indicates the index

of a VRF instance. YES YES No None
Indicates the
description of a
VRF instance. NO NO No None
Indicates the device
number of the ALD.
The device number
of the ALD must be LOFD-001024 /
unique. YES YES No TDLOFD-001024
Indicates the
vendor code of the
device in the
scanning result. NO NO Yes None
number of the
device in the
which identifies the
ALD. It is
recommended that
you set the device
name in the
following format:
sector_device
type_network type.
The meanings of
the parts are as
follows: Sector:
indicates the
number of the
sector. Device type:
indicates the type of
currently connected
device. It can be
SINGLE_RET
(Single-antenna
Remote Electrical
Tilt Unit),
MULTI_RET (Multi-
antenna Remote
Electrical Tilt Unit),
TMA (Tower-
mounted Amplifier).
Network type:
indicates whether
the current ALD is
used for a 2G
network or 3G/LTE
network. The device
name is optional,
but the device
name configured for
each ALD must be LOFD-001024 /
unique. NO NO No TDLOFD-001024
Indicates the
cabinet number of
the RRU or RFU
that controls the LOFD-001024 /
ALD. NO NO No TDLOFD-001024
Indicates the
subrack number of
the RRU or RFU
ALD. NO YES No TDLOFD-001024
Indicates the slot
number of the RRU
or RFU that controls LOFD-001024 /
the ALD. NO YES No TDLOFD-001024

protocol version of
the ALD. NULL
means that the
protocol version
information fails to
be obtained. NO NO Yes None
Indicates the total
number of ALD
subunits. NO NO Yes None

vendor code. NO NO No TDLOFD-001024

number of the ALD.
The vendor code
and the serial
number uniquely LOFD-001024 /
identify an ALD. NO NO No TDLOFD-001024
Indicates the
version information
about the ALD
hardware. NO NO Yes None
Indicates the
version information
about the ALD
software. NO NO Yes None

model of the ALD. NO NO Yes None
type of the ALD. NO NO Yes None
Indicates the port

number of the RRU
or RFU that controls
the ALD. It will be
NULL if the RRU or
RFU does not
support to report
this parameter. NO NO Yes None
Indicates the
cabinet number of
the RRU or RFU
where the antenna
Indicates the
subrack number of
the RRU or RFU
where the antenna
Indicates the slot
number of the RRU
or RFU where the
antenna port is
Indicates the
number of the
antenna port on the
RRU or RFU.For
the RRU that works
in TDD mode and
has eight channels
to be connected to
the antenna, the
service channels
are ANT1 to ANT8
and the
corresponding ports
on the antenna are
R0A to R0H.
For the RRU that
works in TDD mode
and does not have
eight channels or
the RRU that works
in FDD mode, the
service channels
are named from
ANT0 and the
corresponding port
on the antenna is LOFD-001024 /
R0A. YES YES No TDLOFD-001024

of the feeder at the LOFD-001024 /
antenna port. NO NO No TDLOFD-001024
Indicates the
downlink delay of
the antenna, that is,
the propagation
delay from the
output port of an RF
unit to the antenna
port. If no TMA is
configured, this
parameter is set to
the propagation
delay of the feeder.
If the TMA is
configured, the
parameter also
includes the delay
of the TMA. This
parameter does not
need to be
specified when non-
bidirectional LOFD-001024 /
channels are used. NO NO No TDLOFD-001024
delay of the
antenna, that is, the
propagation delay
from the antenna
port to the input
port of an RF unit. If
no TMA is
configured, this
parameter is set to
the propagation
delay of the feeder.
If the TMA is
configured, the
parameter also
includes the delay LOFD-001024 /
of the TMA. NO NO No TDLOFD-001024
switches for the
SINGLE_RET
(Single-antenna
Remote Electrical
Tilt), MULTI_RET
(Multi-antenna
Remote Electrical
Tilt), STMA (Smart
Tower-mounted
Amplifier)must be
set to ON. In actual
running, the
RRU/RFU
automatically sets
this switch to OFF
for an Antenna port
when the ALM-
26530 RF Module
ALD Current
Abnormal alarm is
reported due to
overcurrent,
overcurrent
protection, or
undercurrent
protection (the
RRU/RFU supports
undercurrent
protection and Low
Current Protect
Switch is set to ON
for the RRU/RFU)
on the Antenna
port. For details,
see ALM-26530 RF
Module ALD LOFD-001024 /
Current Abnormal. NO NO No TDLOFD-001024
Undercurrent Alarm
Clear Threshold is
40 mA, the
Overcurrent Occur
Alarm Threshold is
450 mA, and the
Overcurrent Alarm
Clear Threshold is
400 mA. For 24 dB
TMA and RET or 24
dB TMA (AISG)
only: the
Undercurrent Alarm
Occur Threshold is
40 mA, the
Undercurrent Alarm
Clear Threshold is
60 mA, the
Overcurrent Occur
Alarm Threshold is
850 mA, and the
Overcurrent Alarm
Clear Threshold is
750 mA. This
parameter can be
set to
UER_SELF_DEFIN
E,
TMA12DB_ONLY_
NON_AISG,
TMA24DB_ONLY_
NON_AISG,
RET_ONLY_COAXI
AL,
TMA12DB_AISG,
or
TMA24DB_AISG. NO NO No None
Indicates the
undercurrent alarm
occur threshold.
When the ALD
current value is
smaller than this
threshold, an ALM-
26530 RF Module
ALD Current
Abnormal alarm is
reported. The
specific problem is LOFD-001024 /
undercurrent. NO NO No TDLOFD-001024
Indicates the
undercurrent alarm
clear threshold.
When the ALD
current value is
greater than this
threshold, the ALM-
26530 RF Module
ALD Current
Abnormal alarm is LOFD-001024 /
cleared. NO NO No TDLOFD-001024
Indicates the
overcurrent alarm
occur threshold.
When the ALD
current value is
greater than this
threshold, an ALM-
26530 RF Module
ALD Current
Abnormal alarm is
reported. The
specific problem is
overcurrent. When
the overcurrent
alarm occur
threshold is lower
than the maximum
current supported
by the hardware,
the overcurrent
alarm occur
threshold prevails.
When the
overcurrent alarm
occur threshold is
higher than the
maximum current
supported by the
hardware, the
maximum current
supported by the
hardware serves as
the overcurrent
alarm occur LOFD-001024 /
overcurrent alarm
clear threshold is
lower than the
maximum current
supported by the
hardware, the
overcurrent alarm
clear threshold
prevails. When the
ALD current value
is lower than this
threshold, ALM-
26530 RF Module
ALD Current
Abnormal is
cleared.When the
overcurrent alarm
clear threshold is
higher than the
maximum current
supported by the
hardware, the
maximum current
supported by the
hardware serves as
the overcurrent
alarm clear
threshold. When
the ALD current
value is lower than
the maximum
current supported
by the hardware,
ALM-26530 RF
Module ALD
Current Abnormal is LOFD-001024 /
Indicates the
present value of the
current of the ALD. NO NO Yes None
status of the ALD
power supply
switch. NO NO Yes None
Indicates the
antenna type. This
parameter can be
set to SINGLE_RET LOFD-001024 /
or MULTI_RET. NO YES No TDLOFD-001024
Indicates the
polarization type of
the antenna. This
parameter can be
set to SINGLE or LOFD-001024 /
DUAL. NO NO No TDLOFD-001024
Indicates the
connection scenario
of the antenna. This
parameter must be
set based on the
hardware
installation. The
vendor code and
serial number of the
device must be
correctly configured
in a non-regular
scenario. This
parameter can be
set to REGULAR,
DAISY_CHAIN,
SECTOR_SPLITTI
NG, or LOFD-001024 /
2G_EXTENSION. NO YES No TDLOFD-001024
Indicates the
number of
configured RET LOFD-001024 /
subunits. NO NO No TDLOFD-001024

number of the ALD.
The device number
Indicates the
vendor code of the
device in the
number of the
device in the
ALD. It is
recommended that
you set the device
name in the
following format:
sector_device
type_network type.
The meanings of
the parts are as
follows: Sector:
indicates the
number of the
currently connected
device. It can be
SINGLE_RET
(Single-antenna
Remote Electrical
Tilt Unit),
MULTI_RET (Multi-
antenna Remote
TMA (Tower-
mounted Amplifier).
Network type:
indicates whether
the current ALD is
used for a 2G
network or 3G/LTE
network. The device
name is optional,
but the device
name configured for
Indicates the
cabinet number of
the RRU or RFU
Indicates the
subrack number of
the RRU or RFU
Indicates the slot

number of the RRU

protocol version of
the ALD. NULL
means that the
protocol version
Indicates the total
number of ALD
number of the ALD.
The vendor code
and the serial
Indicates the
version information
about the ALD
Indicates the
version information
about the ALD


Indicates the port
number of the RRU
the ALD. It will be
NULL if the RRU or
RFU does not
support to report
Indicates the device LOFD-001024 /

number of the RET. YES YES No TDLOFD-001024
Indicates the
number of the RET
subunit, which LOFD-001024 /
starts from 1. YES YES No TDLOFD-001024

antenna azimuth. NO NO No TDLOFD-001024
Indicates the model

of the RET antenna LOFD-001024 /
module. NO NO No TDLOFD-001024
Indicates the base

station ID. AISG1.1-
based RET
antennas support a
maximum length of
12 characters for
the base station ID.
If the input base
station ID has more
than 12 characters,
only the first 12
characters are
saved on the RET LOFD-001024 /
antenna. NO NO No TDLOFD-001024
Indicates the
beamwidth of band
1. Beamwidth is
used to describe
the capability of the
antenna to transmit
RF signals. It is also
used to measure
the antenna LOFD-001024 /
pattern. NO NO No TDLOFD-001024
Indicates the
beamwidth of band
2. Beamwidth is
used to describe
antenna to transmit
used to measure
Indicates the
beamwidth of band
3. Beamwidth is
used to describe
antenna to transmit
used to measure
Indicates the
beamwidth of band
4. Beamwidth is
used to describe
antenna to transmit
used to measure
Indicates the gain LOFD-001024 /

of band 1. NO NO No TDLOFD-001024


Indicates the date

when the antenna LOFD-001024 /
is installed. NO NO No TDLOFD-001024
Indicates the
mechanical tilt of LOFD-001024 /
the installation. NO NO No TDLOFD-001024
Indicates the ID of
the installation
technician who
installed the LOFD-001024 /
Indicates band 1
Indicates band 2
Indicates band 3
Indicates band 4
Indicates the sector

ID. AISG1.1-based
RET antennas
support a maximum
sector ID length of
4 characters. If the
input sector ID has
more than 4
characters, only the
first 4 characters
are saved on the LOFD-001024 /
RET antenna. NO NO No TDLOFD-001024

number of the RET LOFD-001024 /
antenna module. NO NO No TDLOFD-001024
Indicates the
maximum tilt
supported by the
RET subunit. NO NO Yes None
Indicates the
minimum tilt
supported by the
RET subunit. NO NO Yes None
Indicates band 1
supported by the
antenna. NO NO Yes None
Indicates band 2
supported by the
Indicates band 3
supported by the
Indicates band 4
supported by the
Indicates the
beamwidth of band
1. Beamwidth
describes the
capability of an
antenna to transmit
RF signals. It also
defines the width of
the antenna
pattern. NO NO Yes None
Indicates the
beamwidth of band
2. Beamwidth
describes the
capability of an
antenna to transmit
RF signals. It also
the antenna
Indicates the
beamwidth of band
3. Beamwidth
describes the
capability of an
antenna to transmit
RF signals. It also
the antenna
Indicates the
beamwidth of band
4. Beamwidth
describes the
capability of an
antenna to transmit
RF signals. It also
the antenna
Indicates the gain

of band 1. NO NO Yes None
Indicates the gain

Indicates the gain

Indicates the gain

Indicates the
cabinet number of
the RRU where the
RET port is located. YES YES No None
Indicates the
subrack number of
the RRU where the
RET port is located. YES YES No None
Indicates the slot
number of the RRU
where the RET port
Indicates the
number of the RET
port on an RRU.
This parameter is LOFD-001024 /
set to RET_PORT. YES YES No TDLOFD-001024
of the ALD power
supply switch. If
SINGLE_RET(Singl
e-antenna Remote
Electrical Tilt) or
MULTI_RET(Multi-
antenna Remote
Electrical Tilt) is
used, the ALD
power supply switch
must be set to ON.
In actual running,
the RRU
automatically sets
this switch to OFF
for an RET port
when the ALM-
26530 RF Module
ALD Current
Abnormal alarm is
reported due to
overcurrent,
overcurrent
protection, or
undercurrent
protection (the RRU
supports
undercurrent
protection and Low
Current Protect
Switch is set to ON
for the RRU) on the
RET port. For
details, see ALM-
26530 RF Module
ALD Current LOFD-001024 /
Abnormal. NO NO No TDLOFD-001024
Indicates the type
of the ALD current
alarm threshold.
The current alarm
threshold for the
ALDs (excluding
user-defined ALDs),
that is, for RET
antennas only
(multi-wire cable),
must be selected
according to the
ALD type. The
Undercurrent Alarm
Occur Threshold is
10 mA, the
Undercurrent Alarm
Clear Threshold is
15 mA, the
Overcurrent Alarm
Occur Threshold is
150 mA, and the
Overcurrent Alarm
Clear Threshold is
120 mA. This
parameter can be
set to
UER_SELF_DEFIN
E or
RET_ONLY_MULTI
CORE. NO NO No None
Indicates the
undercurrent alarm
occur threshold.
When the ALD
current value is
smaller than this
threshold, an ALM-
26530 RF Module
ALD Current
Abnormal alarm is
reported. The
specific problem is LOFD-001024 /
undercurrent. NO NO No TDLOFD-001024
Indicates the
undercurrent alarm
clear threshold.
When the ALD
current value is
greater than this
threshold, the ALM-
26530 RF Module
ALD Current
Abnormal alarm is LOFD-001024 /
overcurrent alarm
occur threshold
prevails. When the
ALD current value
is greater than this
threshold, ALM-
26530 RF Module
ALD Current
Abnormal is
reported and the
specific problem is
overcurrent.When
the overcurrent
alarm occur
threshold is higher
than the maximum
current supported
by the hardware,
the maximum
current supported
by the hardware
serves as the
overcurrent alarm
threshold. When
the ALD current
value is the same
as or greater than
the maximum
current supported
by the hardware,
ALM-26530 RF
Module ALD
Current Abnormal is
reported and the
specific problem is
overcurrent LOFD-001024 /
protection. NO NO No TDLOFD-001024
overcurrent alarm
clear threshold is
lower than the
maximum current
supported by the
hardware, the
overcurrent alarm
clear threshold
prevails. When the
ALD current value
is lower than this
threshold, ALM-
26530 RF Module
ALD Current
Abnormal is
cleared.When the
overcurrent alarm
clear threshold is
higher than the
maximum current
supported by the
hardware, the
maximum current
supported by the
hardware serves as
the overcurrent
alarm clear
threshold. When
the ALD current
value is lower than
the maximum
current supported
by the hardware,
ALM-26530 RF
Module ALD
Current Abnormal is LOFD-001024 /
Indicates the
present value of the LOFD-001024 /
current of the ALD. NO NO Yes TDLOFD-001024
status of the ALD
power supply
switch. NO NO Yes None
Indicates the device LOFD-001024 /

number of the RET. YES YES No TDLOFD-001024
Indicates the
number of the RET
subunit, which LOFD-001024 /
starts from 1. YES YES No TDLOFD-001024
Indicates the online
status of the
subunit. NO NO Yes None
tilt of the RET
ID of the RET
Indicates the
cabinet number of
the RRU or RFU
that is connected to LOFD-001024 /
antenna port 1. NO NO No TDLOFD-001024
Indicates the
subrack number of
the RRU or RFU
that is connected to LOFD-001024 /
Indicates the slot
number of the RRU
or RFU that is
connected to LOFD-001024 /
Indicates the port
number of the RRU
or RFU that is
connected to LOFD-001024 /
Indicates the
cabinet number of
the RRU or RFU
that is connected to
antenna port 2. This
parameter is valid
when a dual-
polarized antenna LOFD-001024 /
is used. NO NO No TDLOFD-001024
Indicates the
subrack number of
the RRU or RFU
that is connected to
parameter is valid
when a dual-
Indicates the slot
number of the RRU
or RFU that is
connected to
parameter is valid
when a dual-
Indicates the port
number of RRU or
RFU that is
connected to
parameter is valid
when a dual-
Indicates the
antenna tilt of the
RET subunit. If this
parameter is set to
32767, it is invalid
and the actual tilt is LOFD-001024 /
not changed. NO NO No TDLOFD-001024
Indicates the
allowed maximum
tilt inconsistency.
When the difference
between the actual
tilt of an RET
subunit and
configured tilt is
larger than the
value of this
parameter, ALM-
26757 RET
Antenna Running
Data and
Configuration
Mismatch is LOFD-001024 /
Indicates the name
of the RET
subunit.The name
of the RET subunit
is optional, but the
name configured for
each RET subunit LOFD-001024 /
must be unique. NO NO No TDLOFD-001024
Indicates the
number of
configured TMA
subunits. NO YES No None

number of the ALD.
The device number
Indicates the
vendor code of the
device in the
number of the
device in the
ALD. It is
recommended that
you set the device
name in the
following format:
sector_device
type_network type.
The meanings of
the parts are as
follows: Sector:
indicates the
number of the
currently connected
device. It can be
SINGLE_RET
(Single-antenna
Remote Electrical
Tilt Unit),
MULTI_RET (Multi-
antenna Remote
TMA (Tower-
mounted Amplifier).
Network type:
indicates whether
the current ALD is
used for a 2G
network or 3G/LTE
network. The device
name is optional,
but the device
name configured for
Indicates the
cabinet number of
the RRU or RFU
Indicates the
subrack number of
the RRU or RFU
Indicates the slot
number of the RRU

protocol version of
the ALD. NULL
means that the
protocol version
Indicates the total
number of ALD

number of the ALD.
The vendor code
and the serial
Indicates the
version information
about the ALD
Indicates the
version information
about the ALD


Indicates the port

number of the RRU
the ALD. It will be
NULL if the RRU or
RFU does not
support to report

number of the TMA. YES YES No None
Indicates the
number of the TMA
subunit, which
starts from 1. YES YES No None
Indicates the
antenna azimuth. NO NO No None
Indicates the base

station ID. AISG1.1-
based TMA support
a maximum base
station ID length of
12 characters. If the
input base station
ID has more than
12 characters, only
the first 12
characters are
saved on the TMA. NO NO No None
Indicates the
beamwidth of band
1. Beamwidth is
used to describe
antenna to transmit
used to measure
the antenna
pattern. NO NO No None
Indicates the
beamwidth of band
2. Beamwidth is
used to describe
antenna to transmit
used to measure
the antenna
Indicates the
beamwidth of band
3. Beamwidth is
used to describe
antenna to transmit
used to measure
the antenna
Indicates the
beamwidth of band
4. Beamwidth is
used to describe
antenna to transmit
used to measure
the antenna
Indicates the gain

of band 1. NO NO No None
Indicates the gain

Indicates the gain

Indicates the gain

Indicates the date

when the antenna
is installed. NO NO No None
Indicates the
mechanical tilt of
the installation. NO NO No None
Indicates the ID of
the installation
technician who
installed the
antenna. NO NO No None
Indicates band 1
supported by the
Indicates band 2
supported by the
Indicates band 3
supported by the
Indicates band 4
supported by the

ID. AISG1.1-based
TMA support a
maximum sector ID
length of 4
characters. If the
input sector ID has
more than 4
characters, only the
first 4 characters
are saved on the
TMA. NO NO No None

number of the ALD. NO NO No None
Indicates the model

of the RET antenna
connected to the
TMA. NO NO No None
Indicates the
maximum gain
supported by the
TMA. NO NO Yes None
Indicates the
minimum gain
supported by the
TMA. NO NO Yes None
Indicates the type

of TMA subunit. It
indicates whether
the voltage
standing wave ratio
(VSWR)
measurement and
the bypass mode
are supported. NO NO Yes None
Indicates the step
for the TMA gain
change. NO NO Yes None
Indicates band 1
supported by the
Indicates band 2
supported by the
Indicates band 3
supported by the
Indicates band 4
supported by the
Indicates the
beamwidth of band
1. Beamwidth
describes the
capability of an
antenna to transmit
RF signals. It also
the antenna
Indicates the
beamwidth of band
2. Beamwidth
describes the
capability of an
antenna to transmit
RF signals. It also
the antenna
Indicates the
beamwidth of band
3. Beamwidth
describes the
capability of an
antenna to transmit
RF signals. It also
the antenna
Indicates the
beamwidth of band
4. Beamwidth
describes the
capability of an
antenna to transmit
RF signals. It also
the antenna
Indicates the gain

Indicates the gain

Indicates the gain
Indicates the gain

Indicates the
minimum RX
frequency band
supported by the
TMA. NO NO Yes None
Indicates the
maximum TX
frequency band
supported by the
TMA. NO NO Yes None
Indicates the
minimum TX
frequency band
supported by the
TMA. NO NO Yes None
Indicates the
maximum RX
frequency band
supported by the
TMA. NO NO Yes None

number of the TMA. YES YES No None
Indicates the
number of the TMA
subunit, which
starts from 1. YES YES No None
ID of the TMA
gain of the TMA

working mode of
the TMA subunit. NO NO Yes None
Indicates the online
status of the TMA
Indicates the
number of the
antenna port to
which the TMA
subunit is
connected. NO NO No None
Indicates the
cabinet number of
the RRU or RFU
that provides the
antenna port to
which the TMA
subunit is
Indicates the slot

number of the RRU
or RFU that
provides the
antenna port to
which the TMA
subunit is
Indicates the
subrack number of
the RRU or RFU
that provides the
antenna port to
which the TMA
subunit is
Indicates the gain

of the TMA subunit.
set to 255, it is
invalid and the
actual gain is not
Indicates the
working mode of
the TMA subunit. If
the TMA subunit
works in BYPASS
mode, it does not
amplify the uplink
signals. If this
parameter is set to
DEVICE_DEFAULT
_VALUE, it is invalid
and the actual
mode is not
Indicates the
cabinet number of
the AARU where
the virtual antenna
Indicates the
subrack number of
the AARU where
the virtual antenna
Indicates the slot
number of the
AARU where the
virtual antenna port
Indicates the
number of the
virtual antenna port. YES YES No None

number of the
VRET antenna.The
device number of
the VRET antenna
must be unique. YES YES No None
Indicates the
cabinet number of
the AARU where
the VRET antenna
is located. NO YES No None
Indicates the
subrack number of
the AARU where
the VRET antenna
is located. NO YES No None
Indicates the slot
number of the
AARU where the
VRET antenna is
name of the VRET
antenna.The device
name is optional,
but the device
name configured for
each ALD must be
unique. NO NO No None
Indicates the
number of subunits
contained in the
VRET antenna. NO NO No None
Indicates the
cabinet number of
the AARU where
the VRET subunit is
Indicates the
number of the first
to which the VRET
subunit is
Indicates the
number of the
second virtual
antenna port to
which the VRET
subunit is
Indicates the name

of the VRET
subunit.The name
of the VRET subunit
is optional, but the
name configured for
each VRET subunit
must be unique. NO NO No None
number of the
VRET antenna
where the VRET
subunit is
contained.The
device number of
the VRET antenna
must be unique. YES YES No None
Indicates the
the virtual antenna
port 1 to which the
VRET subunit is
Indicates the slot
number of the
AARU where the
VRET subunit is
Indicates the
subrack number of
the AARU where
the VRET subunit is
Indicates the
number of the
VRET subunit,
which starts from 1. YES YES No None
Indicates the
number of the third
to which the VRET
subunit is
Indicates the
the virtual antenna
port 2 to which the
VRET subunit is
Indicates the
downlink tilt of the
VRET subunit. If
this parameter is
set to 32767, it is
invalid and the
actual tilt is not

tilt of the VRET
subunit. If this
parameter is set to
32767, it is invalid
and the actual tilt is
not changed. NO NO No None
Indicates the
number of the
fourth virtual
antenna port to
which the VRET
subunit is
Indicates the
the virtual antenna
port 3 to which the
VRET subunit is
Indicates the
the virtual antenna
port 4 to which the
VRET subunit is
Indicates the
number of ports
that can be added
to a VRET subunit. NO NO No None
Indicates the
horizontal azimuth
of the virtual
antenna subunit. NO NO No None
Indicates the
horizontal
beamwidth of the
virtual antenna
subunit. NO NO No None
Indicates the
number of the
control link at the
local end. YES YES No None
Indicates the
cabinet number of
the local node at
one end of the
control link. NO YES No None
Indicates the
subrack number of
the local node at
one end of the
Indicates the slot

number of the local
node at one end of
the control link. NO YES No None
Indicates the
cabinet number of
the upper-level
node at the other
end of the control
link. NO YES No None
Indicates the
subrack number of
the upper-level
node at the other
end of the control
Indicates the slot
number of the
upper-level node at
the other end of the
Indicates the port

number of the
upper-level node at
the other end of the
control link.Values 0
to 4 indicate the
ports M0 to M4 on
the board panel. NO YES No None
Indicates whether
to enable a
periodical
configuration check.
set to Enable, the
NE automatically
performs the
periodical
configuration check. NO NO No None
Indicates the
number of the BITS
clock link. YES NO No LBFD-00300504
Indicates the
number of the
cabinet where the
BITS clock link is
Indicates the
number of the
subrack where the
BITS clock link is
Indicates the
number of the slot
where the BITS
clock link is
Indicates the
the BITS clock link.
If the link is active,
the BITS clock link
is the current clock
source of the
system. NO NO Yes None
Indicates the
availability of a
BITS clock link.
Only an available
clock link can serve
as the current clock
source. Otherwise,
the clock link
cannot be locked
even if it is
activated. NO NO Yes None
Indicates the
priority of the clock
source. The value 1
indicates that the
current clock source
has the highest
priority, and the
value 4 indicates
that the current
clock source has
the lowest priority. NO NO No LBFD-00300504
Indicates the
number of the
E1/T1 line clock
link. YES NO No None
Indicates the
number of the
cabinet where the
E1/T1 line clock link
is configured. NO NO No None
Indicates the
number of the
subrack where the
E1/T1 line clock link
Indicates the
number of the slot
where the E1/T1
line clock link is
Indicates the type

of the port where
the line clock link is
located. The LTE
currently does not
support STM1
function. NO NO No LBFD-00300506
Indicates the
number of the port
where the E1/T1
line clock link is
configured. NO NO No LBFD-00300506
Indicates the
the E1/T1 line clock
link. If the link is
active, the E1/T1
line clock link is the
of the system. NO NO Yes None
Indicates the
availability of the
E1/T1 line clock
link. Only an
available clock link
can serve as the
current clock
source. Otherwise,
the clock link
cannot be locked
even if it is
Indicates the
source. The value 1
indicates that the
has the highest
priority, and the
value 4 indicates
that the current
clock source has
the lowest priority. NO NO No LBFD-00300506
Indicates the
number of the peer
reference clock link. YES NO No MRFD-231601
Indicates the
standard of the
peer reference
clock. The standard
of the peer
reference clock is
another standard in
the same BBU
subrack by default. NO NO No MRFD-231601
Indicates the
the peer reference
clock link. If the link
is active, the peer
reference clock link
source of the
Indicates the
availability of the
peer reference
clock link. Only an
can serve as the
current clock
source. Otherwise,
the clock link
cannot be locked
even if it is
Indicates the
number of a TOD
clock link. The
number of the TOD
clock link must
correspond to the
number of the TOD
port on the USCUb.
For example, clock
link No.0
corresponds to port
No.0, clock link
No.1 corresponds
to port No.1. YES NO No None
Indicates the type

of a TOD clock link.
It indicates whether
the corresponding
TOD port is an input
or output port. An
input port is used to
input clock signals
to the BS, and an
output port is used
to provide clock
signals for other
BSs. Only the TOD
clock of input type
can serve as a
clock source. NO NO No None
Indicates the
number of the
cabinet where the
TOD clock link is
Indicates the
number of the
subrack where the
TOD clock link is
Indicates the
number of the slot
where the TOD
clock link is
Indicates the type
of TOD feeder,
which can only be
the twisted-pair
cable currently. NO NO No None

of the TOD feeder.
The feeder delay is
calculated on the
basis of the TOD
feeder length to
ensure the clock
accuracy. The clock
accuracy is affected
if there is an
excessively large
difference [about 20
m (66 ft)] between
the value of this
parameter and the
actual feeder
length. NO NO No None
Indicates the
a TOD clock link. If
the link is active,
the TOD clock link
source of the
Indicates the
availability of an
TOD clock link.
Only an available
source. Otherwise,
the clock link
cannot be locked
even if it is
Indicates the feeder
delay of the TOD
clock link. NO NO Yes None
Indicates the
source. The value 1
indicates that the
has the highest
priority, and the
value 4 indicates
that the current
clock source has
the lowest priority. NO NO No None
Indicates the
number of the GPS
clock link. YES NO No LBFD-00300503
Indicates the
cabinet number of
the board where the
satellite card is
attached. NO NO No None
Indicates the
subrack number of
the board where the
satellite card is
Indicates the slot
number of the
board where the
satellite card is
Indicates the mode
to obtain the
position of the GPS
satellite. NO NO No LBFD-00300503
Indicates the
longitude of the
GPS antenna. A
negative value
indicates the west
longitude, and a
positive value
indicates the east
longitude. NO NO No LBFD-00300503
Indicates the
latitude of the GPS
antenna. A negative
value indicates the
south latitude, and
a positive value
indicates the north
latitude. NO NO No LBFD-00300503
Indicates the
altitude of the GPS
antenna. A negative
the GPS antenna is
below the sea level,
and a positive value
indicates that the
GPS antenna is
above the sea level. NO NO No LBFD-00300503
Indicates the
antenna angle,
which is the angle
with the horizontal
line.Value NULL
indicates that this
parameter is not
supported by the
hardware or the
hardware is faulty. NO NO No LBFD-00300503
Indicates the feeder
delay of the GPS
clock link. NO NO Yes None
Indicates the
duration for tracing
the position of the
GPS satellite. NO NO No LBFD-00300503
Indicates the
precision
requirement for
tracing the position
of the GPS satellite. NO NO No LBFD-00300503
Indicates the type

of the GPS feeder,
which can be the
twisted-pair cable or
coaxial cable. The
board-mounted
GPS antenna uses
the coaxial cable.
The RGPS antenna
uses the twisted-
pair cable. NO NO No LBFD-00300503

of the GPS feeder.
The actual feeder
length is the one
between the GPS
antenna and the
board connected to
the GPS antenna.
Based on the
feeder length, the
feeder delay is
calculated to
ensure the clock
accuracy. The clock
accuracy is affected
if the error between
the value of this
parameter and the
actual feeder length
is greater than 20
m(66 ft). NO NO No LBFD-00300503
Indicates the
software version of
the satellite
receiver. If the
software version of
the satellite receiver
is not supported by
the satellite card,
this parameter is
set to NULL. NO NO Yes None
Indicates whether
the position of the
GPS satellite is
locked by the GPS
reference receiver. NO NO Yes None
Indicates whether
the calendar
information of the
GPS reference
receiver is valid. NO NO Yes None
Indicates whether
the GPS satellite
positioned by the
GPS reference
Indicates whether
the position of the
GPS satellite is set
on the GPS
reference receiver. NO NO Yes None
Indicates the clock
adjusting state of
the GPS reference
Indicates whether
the clock mode of
the GPS reference
Indicates the
number of locked
GLONASS
satellites. NO NO Yes None
Indicates the
physical status of
the satellite card,
which can be
NOTEXIST
(Inexistent),
ANTENNASHORTE
D (Antenna
Shorted),
ANTENNAOPENE
D (Antenna
Opened),
SELF_CHECK_FAI
LURE (Self-check
Failure),
COMEXCEPTION
(Star Card
Communication
Fault), NORMAL
(Normal),
UNKNOWN
(Unknown
Exception),
USCUINVALID
(USCU Invalid), or
UNKNOWN_STAR
_CARD (Unknown
Star Card). NO NO Yes None
Indicates the
physical type of the
satellite card, which
can be M12M, UT,
RT, K161, GG16,
JNS100, RGPS,
CWAIN, RTSMT,
UBLOX5, BD7702,
NAVIOR, PPSTOD,
M1000, TRGPS,
BD7702CMS,
OEM4, or N24MS. NO NO Yes None
Indicates the
number of locked
GPS satellites. NO NO Yes None
with GPS
prioritized. Satellite
cards are classified
into dual-mode
satellite cards and
single-mode
satellite cards. A
dual-mode satellite
card supports two
satellite searching
modes. For
example, the
working mode of a
COMPASS/GPS
satellite card can be
COMPASS
prioritized or GPS
prioritized. In
COMPASS
prioritized mode,
the satellite card
processes signals
from COMPASS
satellites only. In
GPS prioritized
mode, the satellite
card processes
signals from GPS
satellites only. A
single-mode
satellite card
supports only one
satellite searching
mode. For example,
a satellite card
working in GPS
mode. NO NO No LBFD-00300503
Indicates the
number of locked
COMPASS
satellites. NO NO Yes None
Indicates the
the GPS clock link.
the GPS clock link
source of the
Indicates the
source. The value 1
indicates the
has the highest
priority, and the
value 4 indicates
the current clock
source has the
lowest priority. NO NO No None
Indicates the hold

status of a satellite
card. NO NO Yes None
LOFD-00301301
Indicates the LOFD-00301302
number of the IP LOFD-00301303
clock link. YES NO No LOFD-003023
Indicates the type

of the IP clock
protocol, which can
be PTP or Huawei
proprietary protocol.
PTP includes
IEEE1588 V2 and
G.8265.1.
IEEE1588 V2,
defined by the
IEEE, supports both
time
synchronization and
frequency
synchronization.
G.8265.1 supports
frequency
synchronization
only. Huawei
proprietary protocol,
which is the
Huawei-defined IP
clock protocol,
applies to the
interconnection
between Huawei
equipment and LOFD-00301301
supports frequency LOFD-00301302
synchronization LOFD-00301303
only. NO NO No LOFD-003023
Indicates the
number of the
cabinet where the
IP clock link is
Indicates the
number of the
subrack where the
IP clock link is
Indicates the
number of the slot
where the IP clock
link is configured. NO NO No None
LOFD-00301301
Indicates the client LOFD-00301302
IPv4 address of the LOFD-00301303
IP clock link. NO NO No LOFD-003023
LOFD-00301301
Indicates the server LOFD-00301302
IPv4 address of the LOFD-00301303
IP clock link. NO NO No LOFD-003023
Indicates the
domain to which the
IP clock link
belongs. The
setting of this
parameter must be LOFD-00301301
the same as the LOFD-00301302
setting of the clock LOFD-00301303
server. NO NO No LOFD-003023
Indicates the
compensation
mechanism for the
transmission delay
between the clock
server and the base
station. The E2E
mode uses the
Delay-Request-
Response
mechanism to
measure the
average delay
between the
primary and
secondary devices.
The P2P mode
uses the Peer-
Delay mechanism
to measure the LOFD-00301301
average delay LOFD-00301302
between two LOFD-00301303
devices. NO NO No LOFD-003023
Indicates whether
the BMC (Best
Master Clock)
algorithm is
enabled or not. ON
indicates that the
BMC algorithm is
enabled, and OFF LOFD-00301301
indicates that the LOFD-00301302
BMC algorithm is LOFD-00301303
disabled. NO NO No LOFD-003023
Indicates the
priority configured
by the user for the
BMC (Best Master
Clock) algorithm.
The information
about the priority
can be collected
from the upper-level
clock equipment.
This parameter
specifies the clock
quality that is
anticipated by the
user. The upper-
level clock
equipment with the
matching clock
quality is selected
as the target server.
Class0 has the
highest priority, and LOFD-00301301
Class0 to Class3 LOFD-00301302
indicate priorities in LOFD-00301303
descending order. NO NO No LOFD-003023
Indicates the
priority configured
by the user for the
BMC (Best Master
Clock) algorithm.
The information
about the priority
can be collected
clock equipment.
This parameter
specifies the clock
quality that is
anticipated by the
user. The upper-
level clock
equipment with the
matching clock
quality is selected
Class0 has the
Indicates the
priority configured
by the user for the
BMC (Best Master
Clock) algorithm.
The information
about the priority
can be collected
clock equipment.
This parameter
specifies the clock
quality that is
anticipated by the
user. The upper-
level clock
equipment with the
matching clock
quality is selected
Class0 has the
Indicates the
priority configured
by the user for the
BMC (Best Master
Clock) algorithm.
The information
about the priority
can be collected
clock equipment.
This parameter
specifies the clock
quality that is
anticipated by the
user. The upper-
level clock
equipment with the
matching clock
quality is selected
Class0 has the
Indicates the
current priority class
of the IP clock link. NO NO Yes None
LOFD-00301301
Indicates whether LOFD-00301302
the clock source is LOFD-00301303
specified. NO NO No LOFD-003023
Indicates the MAC

address of the clock
source for the IP
clock server. The
MAC address must LOFD-00301301
be in the format of LOFD-00301302
XXXX-XXXX- LOFD-00301303
XXXX. NO NO No LOFD-003023
Indicates the
the IP clock link. If
the IP clock link is
active, it is the
of the system. NO NO Yes None
Indicates the
availability of the IP
clock link. Only an
can serve as the
current clock
source. Otherwise,
the clock link
cannot be locked
even if it is
Indicates the
networking type for
the IP clock. The LOFD-00301301
LTE currently does LOFD-00301302
not support L3 LOFD-00301303
Multicast function. NO NO No LOFD-003023
Indicates the LOFD-00301301
compensation for LOFD-00301302
asymmetry of IP LOFD-00301303
clock links. NO NO No LOFD-003023
Indicates the
number of out-of-
order packets over
the IP clock link.
The LTE currently
does not support
this function. NO NO Yes None
Indicates the
number of packets
lost over the IP
clock link. The LTE
currently does not
support this
function. NO NO Yes None
Indicates the
number of
synchronization
packets received
over the IP clock
link. The LTE
currently does not
support this
Indicates the step
mode, which can be
One Step or Two
Step. NO NO Yes None
Indicates the self-
acquired VLAN ID
of the IP clock
server. NO NO Yes None
Indicates the
source. The value 1
indicates that the
has the highest
priority, and the
value 4 indicates LOFD-00301301
that the current LOFD-00301302
clock source has LOFD-00301303
the lowest priority. NO NO No LOFD-003023
Indicates the
frequency at which
the clock source
sends
announcement LOFD-00301301
packets based on LOFD-00301302
its negotiation with LOFD-00301303
the BS. NO NO No LOFD-003023
Indicates the
frequency at which
the clock source
sends
synchronization LOFD-00301301
packets based on LOFD-00301302
its negotiation with LOFD-00301303
the BS. NO NO No LOFD-003023
Indicates the
priority of the IP
clock server. The
value 0 indicate the
highest priority, and
the value 255
indicates the lowest
priority.If two IP
clock servers are
required, the value
of this parameter is
active and standby
IP clock servers.
The IP clock server
serves as the active
server and the IP
clock server with a LOFD-00301301
lower priority serves LOFD-00301302
as the standby LOFD-00301303
server. NO NO No LOFD-003023
Indicates the type
of protocol
supported by the
IEEE 1588 V2-
compliant IP clock
link, which can be
ITU-T G.8265.1 or
IEEE 1588 V2. ITU-
T G.8265.1 is
defined by the
International
Telecommunication
Union (ITU) for
frequency
synchronization of
an IEEE 1588 V2-
compliant IP clock
link with the
networking type of
UNICAST. An IP
clock link in
compliant with ITU-
T G.8265.1
supports
interconnection with
servers from other
vendors. An IP
clock link in
compliant with IEEE
1588 V2 does not
support LOFD-00301301
interconnection with LOFD-00301302
servers from other LOFD-00301303
vendors. NO NO No LOFD-003023
Indicates the
interval at which
negotiations are
performed between
the BS and IP clock
server. After the
interval elapses, the LOFD-00301301
BS initiates another LOFD-00301302
negotiation with the LOFD-00301303
IP clock server. NO NO No LOFD-003023
LOFD-00301301
LOFD-00301302
Indicates the mode LOFD-00301303
of the IP address. NO NO No LOFD-003023
Indicates the client
IPv6 address of the
IP clock link. The LOFD-00301301
UMTS currently LOFD-00301302
does not support LOFD-00301303
this function. NO NO No LOFD-003023
Indicates the server
IPv6 address of the
IP clock link. The LOFD-00301301
UMTS currently LOFD-00301302
LOFD-00301301
Indicates the pre- LOFD-00301302
hop IPv4 address of LOFD-00301303
an IP clock. NO NO No LOFD-003023
Indicates the
frequency at which LOFD-00301301
PDelay Request LOFD-00301302
packets are sent on LOFD-00301303
an IP clock link. NO NO No LOFD-003023
Indicates the
number of the
synchronous-
Ethernet clock link.
A maximum of two
links can be
configured LOFD-003013
currently. YES NO No LOFD-00301301
Indicates the
number of the
cabinet where the
synchronous-
Ethernet clock link
Indicates the
number of the
subrack where the
synchronous-
Ethernet clock link
Indicates the
number of the slot
where the
synchronous-
Ethernet clock link
Indicates the
number of the port
where the
synchronous-
Ethernet clock link LOFD-003013
is configured. NO NO No LOFD-00301301
Indicates whether
handling of SSM
frames is
supported.The
setting of this
parameter is
consistent with the
setting on the
Ethernet clock
server.
The
synchronization
status message
(SSM) carries clock
quality information,
which is specified in
ITU-T.
This parameter is
valid only when the
synchronous-
Ethernet clock link LOFD-003013
is of the input type. NO NO No LOFD-00301301
Indicates the
a synchronous-
the synchronous-
Ethernet clock link
source of the
system.This
parameter is valid
only when the
synchronous-
Ethernet clock link
is of the input type. NO NO Yes None
Indicates the
availability of a
synchronous-
Only an available
source. Otherwise,
the clock link
cannot be locked
even if it is
activated.This
parameter is valid
only when the
synchronous-
Ethernet clock link
is of the input type. NO NO Yes None
Indicates the
source. The value 1
indicates that the
has the highest
priority, and the
value 4 indicates
that the current
clock source has LOFD-003013
the lowest priority. NO NO No LOFD-00301301
Indicates the type

of a synchronous-
It indicates whether
the corresponding
synchronous-
Ethernet port is an
input or output port.
An input port is
used to import clock
signals to the BS,
and an output port
is used to export
clock signals to
other BSs. Only the
synchronous-
Ethernet clock of
input type can
serve as a clock LOFD-003013
source. NO NO No LOFD-00301301
Indicates the clock
link number of the
reference clock
source. When the
Selected Clock
Source parameter
is set to
GPS+SYNCETH,
this parameter
indicates the
number of the GPS
clock link. When the
Selected Clock
Source parameter
is set to
SYNCETH+IPCLK,
this parameter
indicates the
number of the IP
clock link. When
this parameter is
set to AUTO, the
system selects an LBFD-003005
available clock link LBFD-00300501
from those of the LBFD-00300503
specified reference LBFD-00300504
clock source. If LBFD-00300505
there is more than LBFD-00300506
one clock link and LOFD-003013
the selected clock LOFD-00301301
link fails, another LOFD-00301302
available clock link LOFD-00301303
will be used. NO NO No LOFD-003023
LBFD-003005
LBFD-00300501
Indicates the type LBFD-00300503
of the user-selected LBFD-00300504
clock source. The LBFD-00300505
UMTS currently LBFD-00300506
"SyncEth Clock+IP LOFD-00301301
Clock" and "GPS LOFD-00301302
Clock+SyncEth LOFD-00301303
Clock" function. NO NO No LOFD-003023
Indicates the
working mode of
the system clock.
Manual indicates
that a clock source
must be specified
by the user. Auto
indicates that the
system
automatically
selects a clock
source based on LBFD-003005
the priority and LBFD-00300501
availability of the LBFD-00300502
clock source. Free LBFD-00300503
indicates that the LBFD-00300504
system clock works LBFD-00300505
in free-running LBFD-00300506
mode, that is, the LOFD-003013
system clock does LOFD-00301301
not trace any LOFD-00301302
reference clock LOFD-00301303
source. NO NO No LOFD-003023
Indicates the clock
algorithm mode for
the IP clock link. In
DEFAULT mode
that is also called
the adaptive mode,
and the system
adjusts the filtering
period and
sampling period
based on the
network quality in
this mode. In
CLASSA mode, the
Free Count, Search
Count, Hold Count,
Lock Count, and
Sample Time
parameters are set
to 4, 4, 4, 10, and
2400, respectively.
In CLASSB mode,
the Free Count,
Search Count, Hold
Count, Lock Count,
and Sample Time
parameters are set
to 4, 4, 4, 10, and
4800, respectively.
In CUSTOM mode,
the filtering period
and sampling
period are set by
the customer. The LOFD-003013
not support this LOFD-00301303
function. NO NO No LOFD-003023
Indicates the
filtering period of
the IP clock link
when the IP clock
works in free-
running mode. The LOFD-003013
Indicates the
filtering period of
the IP clock link
when the IP clock
works in fast-
tracking mode. The LOFD-003013
Indicates the
filtering period of
the IP clock link
when the IP clock
works in hold mode. LOFD-003013
The LTE currently LOFD-00301301
Indicates the
filtering period of
the IP clock link
when the IP clock
works in locked
mode. The LTE LOFD-003013
currently does not LOFD-00301301
support this LOFD-00301303
Indicates the
sampling period of
the IP clock link. LOFD-003013
Indicates the mode
of scheduled
synchronization for
the IP clock link. In
ABSOLUTE mode,
the system clock
obtains
synchronization
signals from the
clock server at a
fixed time every few
days until the
system clock is
stable. In
RELATIVE mode,
the system clock
obtains
synchronization
signals from the
clock server at
regular intervals
until the system
clock is stable. In
OFF mode, the
system clock
obtains only
messages from the
clock server in real LOFD-003013
time. The LTE LOFD-00301301
Indicates the
synchronization
period of the IP
clock link. The LTE LOFD-003013
Indicates the start

time of scheduled
synchronization for
the IP clock link. LOFD-003013
LBFD-003005
LBFD-00300501
LBFD-00300503
Indicates the clock LBFD-00300504
synchronization LBFD-00300505
mode of a BS, LBFD-00300506
which can be LOFD-003013
frequency LOFD-00301301
synchronization or LOFD-00301302
time LOFD-00301303
synchronization. NO NO No LOFD-003023

of the current clock
source, which can
be Normal, Lost,
Unavailable, Jitter,
Unknown,
Frequency
Deviation,
Phaseoutscope, or
Inconsistent Clock
References. NO NO Yes None
Indicates the
working mode of
the clock. It also
indicates whether
the system clock is
stable. The working
mode of the clock
can be Fast
tracking, Locked,
Holdover, or Free
running. NO NO Yes None
Indicates the clock
source in use. NO NO Yes None
Indicates the
number of the
cabinet where the
system clock is
located. NO NO Yes None
Indicates the
number of the
subrack where the
system clock is
located. NO NO Yes None
Indicates the
number of the slot
where the system
clock is located. NO NO Yes None
Indicates the clock

quality level of the
BS. The values for
this parameter are
listed in quality
descending order. LBFD-003005
QL-PRC indicates LOFD-003013
the highest quality LOFD-00301301
level and QL-DNU LOFD-00301302
indicates the lowest LOFD-00301303
quality level. NO NO No LOFD-003023

of soft
synchronization
over the Um
interface, including
Phase Lock Not
Started, Phase
Lock Succeeded,
Phase Lock
Tracking, and
Phase Lock Failed.
Only GSM currently
support this
Indicates the
adjustment period
of the frame clock
phase when the Um
interface soft
synchronization
function is enabled
on the base station.
Only GSM currently
support this
Indicates the
adaptive mode of
the soft
synchronous
transport network.
The value of this
parameter depends
on the synchronous
status of the
transport network.
Only GSM currently
support this
Indicates whether
the Um interface
Soft
synchronization
function is enabled
on the base station.
Only GSM currently
support this
Indicates the
number of timing
synchronization
days of the IP clock. LOFD-003013
Indicates GSM
frame bit offset.
This parameter
applies to GSM
only and is valid in
time
synchronization
mode only. NO NO No None
Indicates the
number of the
baseband
equipment. YES YES No None
Indicates the type

of baseband
equipment. YES YES No None
Indicates the
demodulation mode
of an uplink
baseband signaling
processing
equipment for
UMTS. For a newly
added uplink
baseband signaling
processing board,
the demodulation
mode must be
specified. Different
sets of uplink
baseband signaling
processing board
can have different
demodulation
modes. This
parameter cannot
be set to
NULL(Null) in
UMTS mode. In
other modes, this
parameter is invalid
and should be set
to NULL(Null). NO YES No None
Indicates the
information about
the baseband
equipment board. NO YES No None
Indicates the
number of a cabinet
that houses a
baseband
processing unit. YES NO No None
Indicates the
number of a slot
that houses a
baseband
processing unit. YES YES No None
Indicates the
number of a
subrack that
houses a baseband
processing unit. YES NO No None
Indicates the
number of the
sector. YES YES No None
Indicates the name

of the sector. NO NO No None
Indicates the
location name of
the base station. NO NO No None
Indicates the user-

defined information
of a sector. The
value of this
parameter consists
of xx::yy and
common character
strings, which are
separated by
percentage signs
(%), for example,
%tel::88888888%o
wner::huawei
%20130101. xx::yy
indicates that the
value of xx is yy. NO NO No None
Indicates the
information about
the sector antenna. NO YES No None
Indicates the
channel number of
a sector antenna on
an RRU. YES YES No None
Indicates the
cabinet number of
the RRU to which a
sector antenna is
connected. YES YES No None
Indicates the slot
number of the RRU
to which a sector
antenna is
Indicates the
subrack number of
the RRU to which a
sector antenna is
Indicates the range
of RX channel
frequencies
supported by the
sector. The
minimum and
maximum
frequencies used
by an RX channel
are obtained based
on the RRU to
which the channel
is connected. If the
sector is served by
multiple RRUs, the
frequency range
supported by the
sector is the
intersection of all
frequencies used
by these RRUs. If
the sector is served
by only one RRU,
the frequency range
supported by the
sector is the same
as that of the RRU. NO NO Yes None
Indicates the range

of TX channel
frequencies
supported by the
sector. The
minimum and
maximum
frequencies used
by a TX channel are
obtained based on
the RRU to which
the channel is
connected. If the
sector is served by
multiple RRUs, the
frequency range
supported by the
sector is the
intersection of all
frequencies used
by these RRUs. If
the sector is served
by only one RRU,
the frequency range
supported by the
sector is the same
as that of the RRU. NO NO Yes None
Indicates the
license to be
requested for a
sector. NO NO Yes None
Indicates the
license status of a
sector. NO NO Yes None
Indicates the
number of the
sector equipment. YES YES No None
Indicates the
number of the
sector in which the
sector equipment is
Indicates the
information about
the sector
equipment antenna. NO YES No None
Indicates the
channel number of
a sector equipment
antenna on an
RRU. YES YES No None
Indicates the
cabinet number of
the RRU to which a
sector equipment
antenna is
Indicates the RX/TX

mode of the
antenna. YES YES No None
Indicates the slot
number of the RRU
to which a sector
equipment antenna
is connected. YES YES No None
Indicates the
subrack number of
the RRU to which a
sector equipment
antenna is
Indicates whether a
TX antenna works
in master or slave
mode. YES NO No None
Indicates the
cabinet number of
the baseband radio
interface board. YES YES No None
Indicates the
subrack number of
the baseband radio
Indicates the slot
number of the
baseband radio
Indicates the type

of the board. NO YES No None
Indicates the
administrative state
of the board. The
of the board can be
locked, unlocked, or
shutting down. For
details, see ITU-T
X.731. NO NO No None
Indicates the
scheduled duration
before a board is
blocked. NO NO No None
Indicates the block
type of the board.
IMMEDIATE
(Immediate) means
that the board is
blocked and
services carried on
the board are
interrupted
immediately after
the command is
executed.
SHUTDOWN
(Shutdown) means
that the board is
blocked when no
service is carried on
the board. DELAY
(Delay) means that
the board is
blocked and
services carried by
the board are
interrupted after a
scheduled duration. NO NO No None
Indicates the alarm

status of the board.
The alarm state of
the board can be
normal, warning,
minor or critical. For
details about the
definition of Alarm
Status, see ITU-T
X.731. NO NO Yes None
Indicates the
the board, which
can be set to
Enabled or
Disabled. Enabled
indicates that
services can be
carried on the
board. Disabled
indicates that no
service can be
carried on the
Indicates the
physical operation
status of the board,
which can be
Uninstalled,
Starting up, Normal,
Inconsistent,
Unconfigured,
Power off, Fault,
Communication
lost, In test, or the
combination of
various states. For
example, if a board
is not configured
and fails to
communicate with
the main control
and transmission
board, the physical
operation status of
the board is
Unconfigured,
Communication
lost. NO NO Yes None
Indicates the E-
label, a text file with
a maximum of 2
KB. It is used to
record the
manufacturing
information about
equipment such as
the board, sub-
board, or optical
module. Among
board properties
displayed in the text
file, "BoardType"
the board,
"BarCode" indicates
the bar code of the
board and is the
same as the code
labeled on the
board, and "Item"
indicates the BOM
code. NO NO Yes None
Indicates the type

of the board. NO NO Yes None
Indicates the bar

code of the board
or the cabinet. NO NO Yes None
Indicates the
description about
the services and
functions provided
by the board or the
cabinet. NO NO Yes None
Indicates the
manufacturing date
of the board or the
Indicates the
manufacturer of the
board or the
Indicates the issue
number of the
Indicates the type
of a board. NO NO Yes None
Indicates the
temperature of a
Indicates the
temperature of the
power amplifier. NO NO Yes None
Indicates the type

of the device. NO NO Yes None
Indicates the
software version of
the board. NO NO Yes None
Indicates the
hardware version of
Indicates the
BootROM version
Indicates the
cabinet number of
the baseband radio
Indicates the
subrack number of
the baseband radio
Indicates the slot
number of the
baseband radio
Indicates the type

Indicates the
of the board. The
of the board can be
shutting down. For
details, see ITU-T
Indicates the
scheduled duration
before a board is
Indicates the block
type of the board.
IMMEDIATE
(Immediate) means
that the board is
blocked and
services carried on
the board are
interrupted
immediately after
the command is
executed.
SHUTDOWN
(Shutdown) means
that the board is
blocked when no
the board. DELAY
(Delay) means that
the board is
blocked and
services carried by
the board are
interrupted after a
Indicates the alarm

The alarm state of
the board can be
normal, warning,
details about the
definition of Alarm
Status, see ITU-T
Indicates the
the board, which
can be set to
Enabled or
Disabled. Enabled
indicates that
services can be
carried on the
board. Disabled
indicates that no
service can be
carried on the
Indicates the
physical operation
which can be
Uninstalled,
Inconsistent,
Unconfigured,
Power off, Fault,
Communication
combination of
various states. For
example, if a board
is not configured
and fails to
communicate with
the main control
and transmission
board, the physical
operation status of
the board is
Unconfigured,
Communication
Indicates the E-
a maximum of 2
KB. It is used to
record the
manufacturing
information about
equipment such as
the board, sub-
board, or optical
module. Among
board properties
file, "BoardType"
the board,
"BarCode" indicates
the bar code of the
board and is the
same as the code
labeled on the
board, and "Item"
indicates the BOM
Indicates the type

Indicates the bar

code of the board
Indicates the
description about
the services and
functions provided
by the board or the
Indicates the
manufacturing date
of the board or the
Indicates the
manufacturer of the
board or the
Indicates the issue
number of the
Indicates the type
Indicates the
temperature of a
Indicates the
temperature of the
Indicates the type

Indicates the
software version of
Indicates the
hardware version of
Indicates the
BootROM version
Indicates the
address of the base
station. NO NO No None
Indicates the
altitude of the base
Indicates the city

where the base
station is located. NO NO No None
Indicates the
addresses related
to this base station
or telephone
numbers of the
personnel related to
this base station. NO NO No None
Indicates the format

of geographical
coordinates. NO NO No None
Indicates the
latitude of the base
station. A negative
value indicates the
south. NO NO No None
Indicates the
latitude of the base
station in the WGS-
84 coordinate
system. NO NO No None
Indicates the
location ID of the
Indicates the
location name of
the base station. YES NO No None
Indicates the
longitude of the
base station. A
negative value
indicates the west. NO NO No None
Indicates the
longitude of the
base station in the
WGS-84 coordinate
system. NO NO No None
Indicates the site
that the base
station belongs to. NO NO No None
Indicates the range

of the location. NO NO No None
Indicates the block

where the base
station is located. NO NO No None
Indicates the
telephone number
of the maintenance
personnel of the
Indicates the user-

defined information
of the location. NO NO No None
Indicates the
positioning
accuracy of the the
base station's
geographical
location.
This parameter
defines the radius
of a sphere with the
named longitude,
latitude and altitude
as its centre.
The actual location
is in this sphere. NO NO No None
Indicates the Base

Station Almport
Switch. NO NO No None
Indicates the
Almport Cabinet
No. NO NO No None
Indicates the
Almport Subrack
No. NO NO No None
Indicates the
Almport Slot No. NO NO No None
Indicates the
Almport Port No. NO NO No None
Indicates the
location of the base
Indicates the
software version of
the NE. NO NO No None
Indicates the user-

defined information
of the NE. NO NO No None
Indicates the
module version of
NE resources,
including the MOC,
attributes, and
configuration rules. NO NO No None
Indicates the ID of
the product
interface. NO NO No None
Indicates the
product software
version of the base
Indicates the LMT

version. NO NO No None
Indicates the
deployment
identifier that
specifies the site of
the NE. When
multiple NEs are
deployed at the
same site, these
NEs have the same
deployment
identifier. NO NO No None
Indicates the site

name. When
multiple NEs are at
the same site,
these NEs are
configured with the
same site name. NO NO No None
Indicates the NE
name. NO NO No None
Indicates the type

of an NE. NO NO No None
Indicates the user-

defined information
of a node. NO NO No None
Indicates the
resouce model
version of the node. NO NO No None
Indicates the
unique identifier of
a node within a
Indicates the node

name. NO NO No None
Indicates the
working mode of a
base station. The
value of this
parameter can only
be Non-ConCurrent
when the product
type of the NE is
not DBS3900,
BTS3900,
BTS3900A,
BTS3900L, or
BTS3900AL. NO NO No None
Indicates the
cabinet number of
the baseband
processing board. YES NO No None
Indicates the
subrack number of
the baseband
processing board. YES NO No None
Indicates the slot

number of the
baseband
processing board. YES YES No None
Indicates the type

baseband
processing board
supports the BF
function and CPRI
specifications are
applied between
the BBU and RRU.
In TDD_TL mode,
the baseband
processing board
supports the TD-
LTE&TDS-CDMA
dual mode and the
TD-LTE single
mode. In addition,
the baseband
processing board
supports 8T8R BF
and 2T2R Multiple-
Input Multiple-
Output (MIMO) and
CMCC TD-LTE IR
specifications are
applied between
the BBU and RRU.
In FDD_ATG mode,
the baseband
processing board
supports
communication
between Air and
Ground. The
FDD_ATG mode
applies only to
communication
between air and
ground. NO NO No None
Indicates the
of the board. The
of the board can be
shutting down. For
details, see ITU-T
Indicates the
scheduled duration
before a board is
Indicates the block
type of the board.
IMMEDIATE
(Immediate) means
that the board is
blocked and
services carried on
the board are
interrupted
immediately after
the command is
executed.
SHUTDOWN
(Shutdown) means
that the board is
blocked when no
the board. DELAY
(Delay) means that
the board is
blocked and
services carried by
the board are
interrupted after a
Indicates the
hardware
capabilities of a
baseband
processing board.
This parameter is
controlled by a
license control item
and is customized
for a specific
operator. For other
operators, this
and the hardware
capabilities of a
baseband
processing board
are consistent with
the hardware
specifications of
this board. NO NO No None
Indicates the CPRI
extension switch of
a BBP. The
transmission
capability of a fiber
optic cable is
improved when this
parameter is set to
ON. Only LBBPd
supports this
parameter.The BBP
is reset after the
parameter is
modified. NO NO No None
Indicates the
modes for which
the UBBP provides
baseband
processing
resources. This
parameter is valid
only for a UBBP.
For a non-UBBP
board, this
parameter is set to
NULL by default. NO NO No None
Indicates the BBP
capability. If NULL
is displayed, the
BBP capability fails
to be queried. NO NO Yes None
Indicates the alarm

The alarm state of
the board can be
normal, warning,
details about the
definition of Alarm
Status, see ITU-T
Indicates the
the board, which
can be set to
Enabled or
Disabled. Enabled
indicates that
services can be
carried on the
board. Disabled
indicates that no
service can be
carried on the
Indicates the
physical operation
which can be
Uninstalled,
Inconsistent,
Unconfigured,
Power off, Fault,
Communication
combination of
various states. For
example, if a board
is not configured
and fails to
communicate with
the main control
and transmission
board, the physical
operation status of
the board is
Unconfigured,
Communication
Indicates the E-
a maximum of 2
KB. It is used to
record the
manufacturing
information about
equipment such as
the board, sub-
board, or optical
module. Among
board properties
file, "BoardType"
the board,
"BarCode" indicates
the bar code of the
board and is the
same as the code
labeled on the
board, and "Item"
indicates the BOM
Indicates the type

Indicates the bar

code of the board
Indicates the
description about
the services and
functions provided
by the board or the
Indicates the
manufacturing date
of the board or the
Indicates the
manufacturer of the
board or the
Indicates the issue
number of the
Indicates the type
Indicates the
temperature of a
Indicates the
temperature of the
Indicates the type

Indicates the
software version of
Indicates the
hardware version of
Indicates the
BootROM version
Indicates the
number of the
interconnection link. YES YES No None
Indicates the
cabinet number of
the head node at
one end of the
interconnection link. NO YES No None
Indicates the
subrack number of
the head node at
one end of the
Indicates the slot
number of the head
node at one end of
the interconnection
Indicates the port

number of the head
node at the other
end of the
interconnection link.
This port indicates
the port HEI on the
board panel. NO NO No None
Indicates the
cabinet number of
the tail node at one
end of the
Indicates the
subrack number of
the tail node at one
end of the
Indicates the slot
number of the tail
node at one end of
the interconnection
Indicates the port

number of the tail
node at one end of
the interconnection
link. This port
indicates the port
HEI on the board
panel. NO NO No None
Indicates the
transmission rate of
the Common Public
Radio Interface
(CPRI). The
parameter value
NULL indicates that
no CPRI rate is
queried. NO NO Yes None
Indicates the
cabinet number of
the local node at
one end of the
interconnection link. NO NO Yes None
Indicates the
subrack number of
the local node at
one end of the
interconnection link. NO NO Yes None
Indicates the slot
number of the local
node at one end of
the interconnection
Indicates the port

number of the local
node at one end of
the interconnection
link. This port
indicates the port
HEI on the board
panel. NO NO Yes None
Indicates the
cabinet number of
the peer node at
one end of the
This parameter is
set to NULL when
there is no physical
connection. NO NO Yes None
Indicates the
subrack number of
the peer node at
one end of the
This parameter is
set to NULL when
Indicates the slot

number of the peer
node at one end of
the interconnection
is set to NULL when
Indicates the port

number of the peer
node at one end of
the interconnection
link. This port
indicates the port
HEI on the board
panel. NO NO Yes None
Indicates the
transmission rate of
the Serial Rapid
Input and Output
(SRIO). The
parameter value
NULL indicates that
no SRIO rate is
queried. NO NO Yes None
Indicates the
number of the
cabinet where the
BBU FAN unit is
Indicates the
number of the
subrack where the
BBU FAN unit is
Indicates the
number of the slot
where the BBU FAN
unit is located. YES YES No None
Indicates the
current temperature
of the BBU FAN
Indicates the
rotation speed of a
fan in the BBU,
which is the ratio of
the current rotation
speed of the fan to
its maximum
rotation speed. NO NO Yes None
Indicates the alarm

The alarm state of
the board can be
normal, warning,
details about the
definition of Alarm
Status, see ITU-T
Indicates the
the board, which
can be set to
Enabled or
Disabled. Enabled
indicates that
services can be
carried on the
board. Disabled
indicates that no
service can be
carried on the
Indicates the
physical operation
which can be
Uninstalled,
Inconsistent,
Unconfigured,
Power off, Fault,
Communication
combination of
various states. For
example, if a board
is not configured
and fails to
communicate with
the main control
and transmission
board, the physical
operation status of
the board is
Unconfigured,
Communication
Indicates the E-
a maximum of 2
KB. It is used to
record the
manufacturing
information about
equipment such as
the board, sub-
board, or optical
module. Among
board properties
file, "BoardType"
the board,
"BarCode" indicates
the bar code of the
board and is the
same as the code
labeled on the
board, and "Item"
indicates the BOM
Indicates the type

Indicates the bar

code of the board
Indicates the
description about
the services and
functions provided
by the board or the
Indicates the
manufacturing date
of the board or the
Indicates the
manufacturer of the
board or the
Indicates the issue
number of the
Indicates the type
Indicates the
temperature of a
Indicates the
temperature of the
Indicates the type

Indicates the
software version of
Indicates the
hardware version of
Indicates the
BootROM version
Indicates the
cabinet number of
the CCU. YES YES No None
Indicates the
subrack number of
the CCU. YES NO No None
Indicates the slot

number of the CCU. YES NO No None
Indicates the
cabinet number of
the manager unit of
the CCU. NO NO No None
Indicates the
subrack number of
the manager unit of
the CCU. NO NO No None
Indicates the
number of the serial
port where the CCU
is connected. The
serial port is the
port through which
the CCU is
connected to the
BBU. NO NO No None
Indicates whether
the CCU is directly
connected to its
manager unit, LBFD-004012 /
which is a BBU. NO NO No TDLBFD-004015
Indicates the
position of the CCU LBFD-004012 /
on a CCU chain. NO YES No TDLBFD-004013
Indicates the
working standard of
the BBU to which
the CCU is LBFD-004012 /
connected. NO NO No TDLBFD-004014
Indicates whether
to allow the report
of a dedicated
Boolean alarm. If
the shield flag for a
Boolean alarm is
enabled, the
Boolean alarm LBFD-004012 /
cannot be reported. NO NO No TDLBFD-004016
Indicates the
connecting status of
the port on the left
of the CCU. NO NO Yes None
Indicates the
connecting status of
the port on the right
of the CCU. NO NO Yes None
Indicates the
software version of
the CCU. NO NO Yes None
Indicates the PCB

version of the CCU. NO NO Yes None
Indicates the
erasable
programmable logic
device (EPLD)
version of the CCU. NO NO Yes None
Indicates the ID of
the RRU chain/ring. YES NO No None
Indicates the
cabinet number of
the board where the
interconnection port
Indicates the
subrack number of
the board where the
Indicates slot
number of the
board where the
Indicates the
number of the port
that carries the
interconnection link. YES YES No None
Indicates the type

of the cascading
Indicates the
enabled/disabled
state of the port.
Alarms can be
detected and
reported through
the port only when
the state of the port
is ON. NO NO No None
Indicates the
cabinet number of
the board where the
CPRI port is
located. This
parameter is
configured
automatically when
the CPRI port is
created. A CPRI
port is created
automatically when
a BBP is added by
running the ADD
BRD command.
The CPRI port is
used for the
configuration check
when an RRU
chain/ring is added. YES NO No None
Indicates the
subrack number of
the board where the
CPRI port is
located. This
parameter is
configured
automatically when
the CPRI port is
created. A CPRI
port is created
automatically when
a BBP is added by
running the ADD
BRD command.
The CPRI port is
used for the
configuration check
when an RRU
chain/ring is added. YES NO No None
Indicates the slot
number of the
board where the
CPRI port is
located. This
parameter is
configured
automatically when
the CPRI port is
created. A CPRI
port is created
automatically when
a BBP is added by
running the ADD
BRD command.
The CPRI port is
used for the
configuration check
when an RRU
chain/ring is added. YES YES No None
Indicates the port

number of the
board where the
CPRI port is
located. This
parameter is
configured
automatically when
the CPRI port is
created. A CPRI
port is created
automatically when
a BBP is added by
running the ADD
BRD command.
The CPRI port is
used for the
configuration check
when an RRU
chain/ring is added. YES YES No None
Indicates the rate at
the CPRI port. NO NO Yes None
Indicates the
of the CPRI port.
When the CPRI
port is locked, it
indicates that a
breakpoint is
configured on the
RRU chain/ring. At
this moment,
although the optical
cables are
connected, the
CPRI link is
disconnected. The
breakpoint is
configured to
prevent temporary
alarms from being
reported during
network operations.
When the CPRI
port is unlocked, it
indicates that there
is no breakpoint on
the RRU chain/ring.
If the base station
uses CPRI MUX,
the queried value of
this parameter is
NULL on the
converged party
side. NO NO Yes None
Indicates the in-
position state of the
CPRI port. If the
base station uses
CPRI MUX, the
queried value of
this parameter is
NULL on the
converged party
Indicates the mode
of the CPRI port.
There are two
modes: Maser and
Slave. All CPRI
ports on a
baseband
processing board
work in master
mode. On the first-
level RRU in an
RRU chain, the
CPRI port
connected to a
baseband
processing board
works in slave
mode and the other
CPRI port
connected to the
second-level RRU
works in master
mode. When an
RRU and the
baseband
processing boards
are in dual-star
topology, the two
CPRI ports on the
RRU work in slave
mode. NO NO Yes None
Indicates the type

of the CPRI port. If
the base station
uses CPRI MUX,
the queried value of
this parameter is
UNKNOWN on the
converged party
Indicates the Mux

Status of the CPRI
port. NO NO Yes None
Indicates the power
consumption
measurement point
of the BS. NO NO No LOFD-001041
Indicates the
cabinet number of
the main control
and transmission
board. YES YES No None
Indicates the
subrack number of
the main control
and transmission
board. YES YES No None
Indicates the slot

number of the main
control and
transmission board. YES YES No None
Indicates the type

Indicates whether
to enable the USB
port. When this
parameter is set to
DISABLE, the USB
port is disabled.
When this
parameter is set to
ENABLE, the USB
port is enabled. NO NO No None
Indicates the active,

standby or slave
status of the main
control and
transmission board.
The active or
standby status is
available only to the
main control and
transmission board.
This parameter for
other types of board
is set to NULL.
When a board is in
an abnormal state,
Unknown is
displayed. NO NO Yes None
Indicates the alarm
The alarm state of
the board can be
normal, warning,
details about the
definition of Alarm
Status, see ITU-T
Indicates the
the board, which
can be set to
Enabled or
Disabled. Enabled
indicates that
services can be
carried on the
board. Disabled
indicates that no
service can be
carried on the
Indicates the
physical operation
which can be
Uninstalled,
Inconsistent,
Unconfigured,
Power off, Fault,
Communication
combination of
various states. For
example, if a board
is not configured
and fails to
communicate with
the main control
and transmission
board, the physical
operation status of
the board is
Unconfigured,
Communication
Indicates the E-
a maximum of 2
KB. It is used to
record the
manufacturing
information about
equipment such as
the board, sub-
board, or optical
module. Among
board properties
file, "BoardType"
the board,
"BarCode" indicates
the bar code of the
board and is the
same as the code
labeled on the
board, and "Item"
indicates the BOM
Indicates the type

Indicates the bar

code of the board
Indicates the
description about
the services and
functions provided
by the board or the
Indicates the
manufacturing date
of the board or the
Indicates the
manufacturer of the
board or the
Indicates the issue
number of the
Indicates the type
Indicates the
temperature of a
Indicates the
temperature of the
Indicates the type

Indicates the
software version of
Indicates the
hardware version of
Indicates the
BootROM version
Indicates the
number of the
cabinet where the
PEU is located. YES YES No None
Indicates the
number of the
subrack where the
PEU is located. YES YES No None
Indicates the
number of the slot
where the PEU is
Indicates the spare

power of the UPEU. NO NO Yes None
Indicates the spare

power of the BBU. NO NO Yes None
Indicates the alarm

The alarm state of
the board can be
normal, warning,
details about the
definition of Alarm
Status, see ITU-T
Indicates the
the board, which
can be set to
Enabled or
Disabled. Enabled
indicates that
services can be
carried on the
board. Disabled
indicates that no
service can be
carried on the
Indicates the
physical operation
which can be
Uninstalled,
Inconsistent,
Unconfigured,
Power off, Fault,
Communication
combination of
various states. For
example, if a board
is not configured
and fails to
communicate with
the main control
and transmission
board, the physical
operation status of
the board is
Unconfigured,
Communication
Indicates the E-
a maximum of 2
KB. It is used to
record the
manufacturing
information about
equipment such as
the board, sub-
board, or optical
module. Among
board properties
file, "BoardType"
the board,
"BarCode" indicates
the bar code of the
board and is the
same as the code
labeled on the
board, and "Item"
indicates the BOM
Indicates the type

Indicates the bar

code of the board
Indicates the
description about
the services and
functions provided
by the board or the
Indicates the
manufacturing date
of the board or the
Indicates the
manufacturer of the
board or the
Indicates the issue
number of the
Indicates the type
Indicates the
temperature of a
Indicates the
temperature of the
Indicates the type

Indicates the
software version of
Indicates the
hardware version of
Indicates the
BootROM version
Indicates whether
the PSU intelligent
shutdown switch in
a BS is enabled or
disabled. NO NO No LOFD-001056
Indicates the
cabinet number of
the optical or
electrical module. YES YES No None
Indicates the
subrack number of
the optical or
electrical module. YES YES No None
Indicates the slot
number of the
optical or electrical
module. YES YES No None
Indicates the
number of the
module. If a UCIU is
queried, values 0 to
4 indicate the ports
M0 to M4 on the
board panel, and
value 8 indicates
the port S0 on the
board panel. If a
UMPT is queried,
value 8 indicates
the port CI on the
board panel. If a
LBBPd board is
queried, value 6
indicates the port
HEI on the board
panel. YES YES No None
Indicates whether
the optical or
electrical module is
in position. NO NO Yes None
types are different
in the supported
rate sets,
transmission
distance, and
number of
channels. The
transmission
distance of the
electrical port is
short, so it is used
to connect the BBU
or RFU. The Small
Form-factor
Pluggable (SFP) is
a small hot-
swappable module,
which can be
connected to an
module. The
enhanced SFP and
SFP are different in
their supported rate
sets. QSFP has
four bi-directional
channels and SFP
has one bi-
directional channel.
CPRI_E, used in an
RJ45 connector, is
used to connect the
RHUB and MPMU.
In addition, CPRI_E
transmits data
using Ethernet
cables. NO NO Yes None
Indicates the
manufacturer of the
module. NO NO Yes None
Indicates the
transmission mode
of the optical
module, that is,
single-mode or
multi-mode. NO NO Yes None
Indicates the
wavelength of the
optical module. NO NO Yes None
Indicates the
transmission code
rate of the optical or
electrical module. NO NO Yes None
Indicates the
maximum distance
that signals from
the optical module
can travel along a
single-mode optical
fiber with a 9-
micrometer core
diameter. The value
optical module does
not support this
type of optical fiber. NO NO Yes None
Indicates the
maximum distance
that signals from
the optical module
can travel along a
single-mode optical
fiber with a 9-
micrometer core
diameter. The value
optical module does
not support this
Indicates the
maximum distance
that signals from
the optical module
can travel along a
multi-mode optical
fiber with a 50-
micrometer core
diameter. The value
optical module does
not support this
Indicates the
maximum distance
that signals from
the optical module
can travel along a
multi-mode optical
fiber with a 62.5-
micrometer core
diameter. The value
optical module does
not support this
Indicates the
observed
temperature of the
optical module. This
parameter is valid
only when the
optical module type
is ESFP. NO NO Yes None
Indicates the
observed voltage of
the optical module.
This parameter is
valid only when the
optical module type
Indicates the
observed current of
the optical module.
This parameter is
valid only when the
optical module type
Indicates the TX
optical power of the
parameter is valid
only when the
optical module type
Indicates the RX
optical power of the
parameter is valid
only when the
optical module type
Indicates the upper
threshold for the
receive power of an
Indicates the lower
threshold for the
receive power of an
Indicates the upper
threshold for the
transmit power of
an optical module. NO NO Yes None
Indicates the lower
threshold for the
transmit power of
an optical module. NO NO Yes None
Indicates the
cabinet number of
the extension
Indicates the
subrack number of
the extension
Indicates the slot
number of the
extension
Indicates the type

of the sub-board. NO YES No None
Indicates the alarm

The alarm state of
the board can be
normal, warning,
details about the
definition of Alarm
Status, see ITU-T
Indicates the
the board, which
can be set to
Enabled or
Disabled. Enabled
indicates that
services can be
carried on the
board. Disabled
indicates that no
service can be
carried on the
Indicates the
physical operation
which can be
Uninstalled,
Inconsistent,
Unconfigured,
Power off, Fault,
Communication
combination of
various states. For
example, if a board
is not configured
and fails to
communicate with
the main control
and transmission
board, the physical
operation status of
the board is
Unconfigured,
Communication
Indicates the E-
a maximum of 2
KB. It is used to
record the
manufacturing
information about
equipment such as
the board, sub-
board, or optical
module. Among
board properties
file, "BoardType"
the board,
"BarCode" indicates
the bar code of the
board and is the
same as the code
labeled on the
board, and "Item"
indicates the BOM
Indicates the type

Indicates the bar

code of the board
Indicates the
description about
the services and
functions provided
by the board or the
Indicates the
manufacturing date
of the board or the
Indicates the
manufacturer of the
board or the
Indicates the issue
number of the
Indicates the type
Indicates the
temperature of a
Indicates the
temperature of the
Indicates the type

Indicates the
software version of
Indicates the
hardware version of
Indicates the
BootROM version
Indicates the
cabinet number of
the UCIU. YES YES No None
Indicates the
subrack number of
the UCIU. YES YES No None
Indicates the slot
number of the
UCIU. YES YES No None
Indicates the alarm

The alarm state of
the board can be
normal, warning,
details about the
definition of Alarm
Status, see ITU-T
Indicates the
the board, which
can be set to
Enabled or
Disabled. Enabled
indicates that
services can be
carried on the
board. Disabled
indicates that no
service can be
carried on the
Indicates the
physical operation
which can be
Uninstalled,
Inconsistent,
Unconfigured,
Power off, Fault,
Communication
combination of
various states. For
example, if a board
is not configured
and fails to
communicate with
the main control
and transmission
board, the physical
operation status of
the board is
Unconfigured,
Communication
Indicates the E-
a maximum of 2
KB. It is used to
record the
manufacturing
information about
equipment such as
the board, sub-
board, or optical
module. Among
board properties
file, "BoardType"
the board,
"BarCode" indicates
the bar code of the
board and is the
same as the code
labeled on the
board, and "Item"
indicates the BOM
Indicates the type

Indicates the bar

code of the board
Indicates the
description about
the services and
functions provided
by the board or the
Indicates the
manufacturing date
of the board or the
Indicates the
manufacturer of the
board or the
Indicates the issue
number of the
Indicates the type
Indicates the
temperature of a
Indicates the
temperature of the
Indicates the type

Indicates the
software version of
Indicates the
hardware version of
Indicates the
BootROM version
Indicates the
number of the
cabinet where the
UEIU is located. YES YES No None
Indicates the
number of the
subrack where the
UEIU is located. YES YES No None
Indicates the
number of the slot
where the UEIU is
Indicates the alarm

The alarm state of
the board can be
normal, warning,
details about the
definition of Alarm
Status, see ITU-T
Indicates the
the board, which
can be set to
Enabled or
Disabled. Enabled
indicates that
services can be
carried on the
board. Disabled
indicates that no
service can be
carried on the
Indicates the
physical operation
which can be
Uninstalled,
Inconsistent,
Unconfigured,
Power off, Fault,
Communication
combination of
various states. For
example, if a board
is not configured
and fails to
communicate with
the main control
and transmission
board, the physical
operation status of
the board is
Unconfigured,
Communication
Indicates the E-
a maximum of 2
KB. It is used to
record the
manufacturing
information about
equipment such as
the board, sub-
board, or optical
module. Among
board properties
file, "BoardType"
the board,
"BarCode" indicates
the bar code of the
board and is the
same as the code
labeled on the
board, and "Item"
indicates the BOM
Indicates the type

Indicates the bar

code of the board
Indicates the
description about
the services and
functions provided
by the board or the
Indicates the
manufacturing date
of the board or the
Indicates the
manufacturer of the
board or the
Indicates the issue
number of the
Indicates the type
Indicates the
temperature of a
Indicates the
temperature of the
Indicates the type

Indicates the
software version of
Indicates the
hardware version of
Indicates the
BootROM version
Indicates the
number of the
cabinet where the
USCU is located. YES YES No None
Indicates the
number of the
subrack where the
USCU is located. YES YES No None
Indicates the
number of the slot
where the USCU is
Indicates the alarm

The alarm state of
the board can be
normal, warning,
details about the
definition of Alarm
Status, see ITU-T
Indicates the
the board, which
can be set to
Enabled or
Disabled. Enabled
indicates that
services can be
carried on the
board. Disabled
indicates that no
service can be
carried on the
Indicates the
physical operation
which can be
Uninstalled,
Inconsistent,
Unconfigured,
Power off, Fault,
Communication
combination of
various states. For
example, if a board
is not configured
and fails to
communicate with
the main control
and transmission
board, the physical
operation status of
the board is
Unconfigured,
Communication
Indicates the E-
a maximum of 2
KB. It is used to
record the
manufacturing
information about
equipment such as
the board, sub-
board, or optical
module. Among
board properties
file, "BoardType"
the board,
"BarCode" indicates
the bar code of the
board and is the
same as the code
labeled on the
board, and "Item"
indicates the BOM
Indicates the type

Indicates the bar

code of the board
Indicates the
description about
the services and
functions provided
by the board or the
Indicates the
manufacturing date
of the board or the
Indicates the
manufacturer of the
board or the
Indicates the issue
number of the
Indicates the type
Indicates the
temperature of a
Indicates the
temperature of the
Indicates the type

Indicates the
software version of
Indicates the
hardware version of
Indicates the
BootROM version
Indicates the
battery intelligent
management switch
status. Intelligent
battery power
management
prolongs the
lifespan of a battery
using the floating
charge mode. NO NO No LOFD-001071
Whether to allow
the generation of
the Power Lose
Redundancy alarm.
The PSUs need to
be configured in
N+1 backup mode.
When this
parameter is set to
"OPEN", the BTS
reports the Power
Lose Redundancy
alarm if the PSUs
are not configured
in N+1 mode. NO NO No None
Indicates the
maintenance status
of the NE. The
status is set to
TESTING by
default by the
manufacturers.
ExpandStatus1 to
ExpandStatus10
can be self-defined. NO NO No None
Indicates the start
time of
maintenance status
of the NE. If this
parameter is not
specified, the start
time of the
maintenance status
is 2000-01-01
00:00:00. NO NO No None
Indicates the end
time of
maintenance status
of the NE. If this
parameter is not
specified, the
maintenance status
ends at 2037-12-31
23:59:59. NO NO No None
Indicates the
remarks of
maintenance status
of the NE. NO NO No None
Indicates the
current
maintenance mode
of the network
element (NE). NO NO Yes None
Indicates the direct

voltage alarm
switch. The switch
controls whether to
report the ALM-
26113 Base Station
DC Power Supply
Abnormal in the
case of low DC
input voltage. NO NO No None
Indicates the DC
voltage alarm
occured threshold.
When the load
voltage is lower
than the DC voltage
alarm occured
threshold and the
direct voltage alarm
switch is set to
ENABLE, an ALM-
26113 Base Station
DC Power Supply
Abnormal is
Indicates the DC
voltage alarm
restored threshold.
When the load
voltage is higher
than the DC voltage
alarm restored
threshold and the
direct voltage alarm
switch is set to
ENABLE, an ALM-
26113 Base Station
DC Power Supply
Abnormal is
cleared. NO NO No None
Indicates the ID of
the open DU
interface (ODI) and
can be used only in
LTE_TDD. If this
parameter is set to
0, no ID is
configured for the
ODI and this base
station cannot
communicate with
other base stations. NO NO No None
Indicates the physic

state of the NE. NO NO No None
Indicates whether
the BS enters the
energy saving
mode when some
PSUs become
faulty. If this
parameter is set to
ON, the BS enters
the energy saving
mode to reduce
power consumption
when some PSUs
become faulty and
the remaining PSUs
cannot meet the
BS's power
requirements. In
energy saving
mode, the BS shuts
down TRXs or
reduces their
transmit power. NO NO No None
Indicates the
communication
protocol type used
between the BBU
and radio frequency
(RF) units. The
value CPRI
indicates the
Huawei proprietary
protocol, and the
value TDL_IR
indicates the IR
communication
protocol defined by
China Mobile
Communication
Corporation
(CMCC). NO NO No None
Indicates whether
the Smart TRX
function is enabled
or disabled. The
Smart TRX function
is supported only
when the XMU is
installed. If the
Smart TRX function
is disabled, the
Smart TRX function
of the XMU cannot
be processed by
the BTS. NO NO No None
Indicates the
cabinet number. YES YES No None
Type of a cabinet.
This parameter is
set to VIRTUAL
when the type of a
cabinet is not within
the value range of
this parameter. NO NO No None
Indicates a brief
description of the
cabinet, which can
be the function,
location, and some
other information of
the cabinet. NO NO No None
Indicates the
cabinet type. NO NO Yes None
Indicates the
cabinet number of
the subrack. YES YES No None
Indicates the
number of the
subrack. YES YES No None
Indicates the type
of the subrack. NO YES No None
Indicates a brief
description of the
subrack, which can
be the function,
location, and some
other information of
the subrack. NO NO No None
Indicates the type

of power supply to
the subrack. NO NO Yes None
Indicates the alarm
The alarm state of
the board can be
normal, warning,
details about the
definition of Alarm
Status, see ITU-T
Indicates the
the board, which
can be set to
Enabled or
Disabled. Enabled
indicates that
services can be
carried on the
board. Disabled
indicates that no
service can be
carried on the
Indicates the
physical operation
which can be
Uninstalled,
Inconsistent,
Unconfigured,
Power off, Fault,
Communication
combination of
various states. For
example, if a board
is not configured
and fails to
communicate with
the main control
and transmission
board, the physical
operation status of
the board is
Unconfigured,
Communication
Indicates the E-
a maximum of 2
KB. It is used to
record the
manufacturing
information about
equipment such as
the board, sub-
board, or optical
module. Among
board properties
file, "BoardType"
the board,
"BarCode" indicates
the bar code of the
board and is the
same as the code
labeled on the
board, and "Item"
indicates the BOM
Indicates the type

Indicates the bar

code of the board
Indicates the
description about
the services and
functions provided
by the board or the
Indicates the
manufacturing date
of the board or the
Indicates the
manufacturer of the
board or the
Indicates the issue
number of the
Indicates the type
Indicates the
temperature of a
Indicates the
temperature of the
Indicates the type

Indicates the
software version of
Indicates the
hardware version of
Indicates the
BootROM version
Indicates the
number of the
cabinet where the
EMU is located. YES NO No None
Indicates the
number of the
subrack where the
EMU is located. YES NO No None
Indicates the
number of the slot
where the EMU is
Indicates the
cabinet number of
the manager that
manages the EMU.
The manager of the
EMU is usually a LBFD-004012 /
BBU, RRU or CCU. NO NO No TDLBFD-004012
Indicates the
subrack number of
the manager. The
manager of the
EMU is usually a LBFD-004012 /
Indicates the
port where the EMU
is connected. The
serial port is the
port through which
the EMU is
connected to the LBFD-004012 /
manager unit. NO YES No TDLBFD-004012
Indicates the
communication
address of the
EMU, which is
determined by the
settings of the 4-bit
dual in-line package
(DIP) switch on the
EMU. The
communication
address is used by
the EMU to
communicate with
the main control
and transmission
board. The value of
this parameter must
be consistent with
the actual settings
of the DIP switch.
The 4-bit DIP switch
can be treated as a
4-bit binary number.
The settings of ON
and OFF are
represented by 1
and 0 respectively.
Convert the 4-bit
number from binary
to decimal, and
then the decimal
number is used as
the value of this LBFD-004012 /
parameter. NO NO No TDLBFD-004012
Indicates the lower
limit of temperature.
When the
temperature is
below the lower
limit, an ALM-25650
Temperature
Abnormal alarm is LBFD-004012 /
Indicates the upper

When the
temperature
exceeds the upper
limit, an ALM-25650
Temperature
Indicates the lower

limit of humidity.
When the humidity
is below the lower
limit, an ALM-25651
Humidity Abnormal LBFD-004012 /
alarm is reported. NO NO No TDLBFD-004012
Indicates the upper

limit of humidity.
When the humidity
exceeds the upper
limit, an ALM-25651
Indicates whether
to allow the report
of a dedicated
analog alarm. If the
shield flag for an
analog alarm is
enabled, the analog
alarm cannot be
reported. The
48V_DISABLE
check box under
this parameter must
be set to off.
Otherwise, ALM-
26271 Inter-System
Monitoring Device
Parameter Settings
Conflict will be
reported mistakenly
in a separate-MPT
multimode base
station that involves LBFD-004012 /
the GBTS. NO NO No TDLBFD-004012
Indicates whether
to allow the report
of a dedicated
Boolean alarm. If
Boolean alarm is
enabled, the
Indicates the
current temperature
of the environment. NO NO Yes None
Indicates the
ambient humidity. NO NO Yes None
Indicates the -48 V
input voltage from
the power supply
Indicates the
current value
measured by the
external sensor that
is connected to
analog port 1. NO NO Yes None
Indicates the
current value
measured by the
is connected to
Indicates the
current value
measured by the
is connected to
Indicates the
current value
measured by the
is connected to
Indicates the alarm
The alarm state of
the board can be
normal, warning,
details about the
definition of Alarm
Status, see ITU-T
Indicates the
the board, which
can be set to
Enabled or
Disabled. Enabled
indicates that
services can be
carried on the
board. Disabled
indicates that no
service can be
carried on the
Indicates the
physical operation
which can be
Uninstalled,
Inconsistent,
Unconfigured,
Power off, Fault,
Communication
combination of
various states. For
example, if a board
is not configured
and fails to
communicate with
the main control
and transmission
board, the physical
operation status of
the board is
Unconfigured,
Communication
Indicates the E-
a maximum of 2
KB. It is used to
record the
manufacturing
information about
equipment such as
the board, sub-
board, or optical
module. Among
board properties
file, "BoardType"
the board,
"BarCode" indicates
the bar code of the
board and is the
same as the code
labeled on the
board, and "Item"
indicates the BOM
Indicates the type

Indicates the bar

code of the board
Indicates the
description about
the services and
functions provided
by the board or the
Indicates the
manufacturing date
of the board or the
Indicates the
manufacturer of the
board or the
Indicates the issue
number of the
Indicates the type
Indicates the
temperature of a
Indicates the
temperature of the
Indicates the type

Indicates the
software version of
Indicates the
hardware version of
Indicates the
BootROM version
Indicates the
number of the
cabinet where the
FMU is located. YES NO No None
Indicates the
number of the
subrack where the
FMU is located. YES NO No None
Indicates the
number of the slot
where the FMU is
Indicates the
cabinet number of
the manager. The
manager of the
FMU is usually a LBFD-004012 /
Indicates the
subrack number of
the manager. The
manager of the
FMU is usually a LBFD-004012 /
Indicates the
port where the FMU
is connected. The
serial port is the
port through which
the FMU is
Indicates the
communication
address of the
FMU. The FMU
communicates with
the main control
and transmission
board by using this
communication LBFD-004012 /
address. NO NO No TDLBFD-004012
Indicates whether
to allow the report
of a dedicated
Boolean alarm. If
Boolean alarm is
enabled, the
Indicates the ratio
of the current
rotation speed of
the fan to its
maximum rotation
speed. NO NO Yes None
Indicates the
temperature at the
air outlet of the
FMU. NO NO Yes None
Indicates the
temperature at the
air inlet of the FMU. NO NO Yes None
Indicates the
average rotation
speed of the fan per
minute. NO NO Yes None

of smart
temperature
control. When the
smart temperature
control is enabled,
the rotation speed
of the fan is
adjusted by the
FMU according to
the temperature
control parameters
delivered by the
BBU. When the
smart temperature
control is disabled,
the rotation speed
of the fan is
adjusted by the
FMU automatically
according to the LBFD-004012 /
temperature. NO NO No TDLBFD-004012
can run the DSP
FMU command to
query whether the
temperature control
mode in the
command output is
consistent with the
configuration. If
yes, the
configuration is
successful. If no,
the configuration
fails and the system
adopts the default
mode (mode 0).
The reasons for the
configuration failure
and
countermeasures
are as follows:
1. The FMU version
does not support
the temperature
control mode
configuration.
2. The curve
corresponding to
the configured
temperature control
mode is incorrect
and the
configuration
cannot take effect
on the FMU. You
need to contact the
Huawei technical LBFD-004012 /
support. NO NO No TDLBFD-004012
Indicates the alarm

The alarm state of
the board can be
normal, warning,
details about the
definition of Alarm
Status, see ITU-T
Indicates the
the board, which
can be set to
Enabled or
Disabled. Enabled
indicates that
services can be
carried on the
board. Disabled
indicates that no
service can be
carried on the
Indicates the
physical operation
which can be
Uninstalled,
Inconsistent,
Unconfigured,
Power off, Fault,
Communication
combination of
various states. For
example, if a board
is not configured
and fails to
communicate with
the main control
and transmission
board, the physical
operation status of
the board is
Unconfigured,
Communication
Indicates the E-
a maximum of 2
KB. It is used to
record the
manufacturing
information about
equipment such as
the board, sub-
board, or optical
module. Among
board properties
file, "BoardType"
the board,
"BarCode" indicates
the bar code of the
board and is the
same as the code
labeled on the
board, and "Item"
indicates the BOM
Indicates the type

Indicates the bar

code of the board
Indicates the
description about
the services and
functions provided
by the board or the
Indicates the
manufacturing date
of the board or the
Indicates the
manufacturer of the
board or the
Indicates the issue
number of the
Indicates the type
Indicates the
temperature of a
Indicates the
temperature of the
Indicates the type

Indicates the
software version of
Indicates the
hardware version of
Indicates the
BootROM version
Indicates the
number of the
cabinet where the
TCU is located. YES NO No None
Indicates the
number of the
subrack where the
Indicates the
number of the slot
where the TCU is
Indicates the
cabinet number of
the manager. The
manager of the
TCU is usually a LBFD-004012 /
Indicates the
subrack number of
the manager. The
manager of the
TCU is usually a LBFD-004012 /
Indicates the
port where the TCU
is connected. The
serial port is the
port through which
the TCU is
Indicates the
communication
address of the TCU.
The TCU
communicates with
the main control
and transmission
board by using this
communication LBFD-004012 /
address. NO NO No TDLBFD-004012
Indicates the lower

threshold of the
temperature. If the
cabinet air outlet
temperature is
lower than the
value, the ALM-
25655 Cabinet Air
Outlet Temperature
Unacceptable is LBFD-004012 /
Indicates the upper
threshold of the
temperature. If the
cabinet air outlet
temperature is
higher than the
value, the ALM-
25655 Cabinet Air
Outlet Temperature
Unacceptable is LBFD-004012 /
Indicates whether
to allow the report
of a dedicated
Boolean alarm. If
Boolean alarm is
enabled, the

type of the TCU. NO NO Yes None
Indicates the
temperature at the
air inlet of the
TCU.Value NULL
indicates that this
parameter is not
supported by the
hardware or the
hardware is faulty. NO NO Yes None
Indicates the
temperature at the
air outlet of the
TCU. NO NO Yes None
Indicates the
temperature inside
the TCU.Value
NULL indicates that
this parameter is
not supported by
the hardware or the
Indicates the
average rotation
speed of the inner
circulation fan per
Indicates the
average rotation
speed of the outer
circulation fan per
Indicates the
current heating
power of the TCU. If
this parameter is
displayed as 0, the
TCU is not heating
the cabinet. If this
parameter is not
displayed as 0, the
TCU is heating the
cabinet. If this
parameter is
displayed as NULL,
the TCU used for
heating does not
exist or is not
supported. NO NO Yes None
Indicates the
software version of
the TCU. NO NO Yes None
Indicates the PCB

version of the TCU. NO NO Yes None
Indicates the
erasable
programmable logic
device (EPLD)
version of the TCU. NO NO Yes None
Indicates the
compiling time of
the software
program in the
TCU. NO NO Yes None
Indicates the
version description
of the TCU. NO NO Yes None
Indicates the
manufacturer of the
TCU. NO NO Yes None
can run the DSP
TCU command to
query whether the
temperature control
mode in the
command output is
consistent with the
configuration. If
yes, the
configuration is
successful. If no,
the configuration
fails and the system
adopts the default
mode (mode 0).
The reasons for the
configuration failure
and
countermeasures
are as follows:
1. The TCU version
does not support
the temperature
control mode
configuration.
2. The curve
corresponding to
the configured
temperature control
mode is incorrect
and the
configuration
cannot take effect
on the TCU. You
need to contact the
Huawei technical LBFD-004012 /
support. NO NO No TDLBFD-004012
Indicates the alarm

The alarm state of
the board can be
normal, warning,
details about the
definition of Alarm
Status, see ITU-T
Indicates the
the board, which
can be set to
Enabled or
Disabled. Enabled
indicates that
services can be
carried on the
board. Disabled
indicates that no
service can be
carried on the
Indicates the
physical operation
which can be
Uninstalled,
Inconsistent,
Unconfigured,
Power off, Fault,
Communication
combination of
various states. For
example, if a board
is not configured
and fails to
communicate with
the main control
and transmission
board, the physical
operation status of
the board is
Unconfigured,
Communication
Indicates the E-
a maximum of 2
KB. It is used to
record the
manufacturing
information about
equipment such as
the board, sub-
board, or optical
module. Among
board properties
file, "BoardType"
the board,
"BarCode" indicates
the bar code of the
board and is the
same as the code
labeled on the
board, and "Item"
indicates the BOM
Indicates the type

Indicates the bar

code of the board
Indicates the
description about
the services and
functions provided
by the board or the
Indicates the
manufacturing date
of the board or the
Indicates the
manufacturer of the
board or the
Indicates the issue
number of the
Indicates the type
Indicates the
temperature of a
Indicates the
temperature of the
Indicates the type

Indicates the
software version of
Indicates the
hardware version of
Indicates the
BootROM version
Indicates the
number of the
cabinet where the
Indicates the
number of the
subrack where the
Indicates the
number of the slot
where the TCU is
Indicates the
threshold of the low LBFD-004012 /
temperature state. NO NO No TDLBFD-004012
Indicates the
threshold of the
high temperature LBFD-004012 /
state. NO NO No TDLBFD-004012
Indicates the
expected lowest
temperature at the LBFD-004012 /
air outlet. NO NO No TDLBFD-004012
Indicates the
tolerable error value
of temperature LBFD-004012 /
control. NO NO No TDLBFD-004012
Indicates the
difference between
the temperature at
the air inlet and that
of the environment
at the normal LBFD-004012 /
Indicates the
difference between
the temperature at
the air outlet and
that of the air inlet
at the normal LBFD-004012 /
Indicates the
difference between
the temperature at
the air outlet and
that of the
environment at the LBFD-004012 /
high temperature. NO NO No TDLBFD-004012
Indicates the
number of the
cabinet where the
PMU is located. YES NO No None
Indicates the
number of the
subrack where the
PMU is located. YES NO No None
Indicates the
number of the slot
where the PMU is
Indicates the
cabinet number of
the manager. The
manager of the
PMU is usually a
BBU, RRU or CCU. NO NO No None
Indicates the
subrack number of
the manager. The
manager of the
PMU is usually a
BBU, RRU or CCU. NO NO No None
Indicates the
port where the PMU
is connected. The
serial port is the
port through which
the PMU is
connected to the
manager unit. NO YES No None
Indicates the
communication
address of the
PMU, which is
determined by the
settings of the 4-bit
dual in-line package
(DIP) switch on the
PMU. The
communication
address is used by
the PMU to
communicate with
the main control
and transmission
board. The value of
this parameter must
be consistent with
the actual settings
of the DIP switch.
The 4-bit DIP switch
can be treated as a
4-bit binary number.
The settings of ON
and OFF are
represented by 1
and 0 respectively.
Convert the 4-bit
number from binary
to decimal, and
then the decimal
number is used as
Indicates the type
of the power
system for the LBFD-004012 /
PMU. NO NO No TDLBFD-004012
Indicates the lower

threshold of AC
input voltage. When
the AC input
voltage is lower
than the value, an
ALM-25622 Mains
Input Abnormal LBFD-004012 /
Indicates the higher

threshold of AC
input voltage. When
the AC input
voltage is higher
than the value, an
ALM-25622 Mains
Input Abnormal LBFD-004012 /
Indicates the lower
threshold of the DC
voltage. When the
output voltage of
the busbar is lower
than the value, an
ALM-25621 DC
Output Abnormal LBFD-004012 /
Indicates the upper
threshold of the DC
voltage. When the
output voltage of
the busbar is higher
than the value, an
ALM-25621 DC
Output Abnormal LBFD-004012 /
Indicates the flag
for power-off
against low voltage,
which determines
whether the load is
powered off in the LBFD-004012 /
case of low voltage. NO NO No TDLBFD-004012
Indicates the load
voltage below
which the load is
powered off
automatically when
load power-off
against low voltage LBFD-004012 /
is enabled. NO NO No TDLBFD-004012
Indicates the lower

threshold of the
cabinet
temperature. If the
cabinet temperature
is lower than the
value, an ALM-
25652 Cabinet
Temperature
Indicates the upper

threshold of the
cabinet
temperature. If the
cabinet temperature
is higher than the
value, an ALM-
25652 Cabinet
Temperature
Indicates the lower
threshold of the
cabinet humidity. If
the cabinet humidity
is lower than the
value, an ALM-
25653 Cabinet
Indicates the upper

threshold of the
cabinet humidity. If
the cabinet humidity
is higher than the
value, an ALM-
25653 Cabinet
Indicates whether
to allow the report
of a dedicated
analog alarm. If the
shield flag for an
analog alarm is
enabled, the analog
alarm cannot be LBFD-004012 /
Indicates whether
to allow the report
of a dedicated
Boolean alarm. If
Boolean alarm is
enabled, the
Indicates the
current AC voltage,
that is, the input
mains voltage to
the rectifier. NO NO Yes None
Indicates the DC
output voltage of
the busbar. NO NO Yes None
Indicates the total

load current. The
total load current is
the sum of current
supplied by all the
DC output terminals
on the power
subrack. NO NO Yes None
Indicates the
current cabinet
temperature of the
cabinet.Value NULL
indicates that this
parameter is not
supported by the
antenna or the
antenna is faulty. NO NO Yes None
Indicates the
ambient humidity of
the cabinet.Value
NULL indicates that
this parameter is
not supported by
the hardware or the
Indicates the
power-on status of
the secondary load.
The secondary load
can be set to
automatically
powered off in the
following modes:
HighTemperaturePo
werOff(High
temperature power
off),
LowTemperaturePo
werOff(Low
temperature power
off), and
LowVoltagePowerO
ff(Low voltage
power off). NO NO Yes None
compensate for the
power loss of the
battery due to self-
discharge and to
keep the capacity of
the battery. It can
also recover the
battery capacity.
During the floating
charge, the
charging voltage is
relatively low. Force
boost charge is an
enhanced mode of
the boost charge.
The charging
current and boost
charging voltage of
the force boost
charge are higher
than those of the
boost charge, while
the charging time is
shorter than that of
the boost charge. It
can be used in the
scenario where the
electricity network is
unsatisfactory and
the battery is
discharged
frequently.Sleeping
indicates that a
battery is neither in
the charging state
nor in the
discharging state. NO NO Yes None
Indicates the
charging or
discharging current
of batteries. NO NO Yes None
Indicates whether
the batteries that
are being charged
are in the current
limiting status.Value
NULL indicates that
this parameter is
not supported by
the hardware or the
Indicates the
power-on/power-off
status of the
battery. The battery
can be
disconnected
manually or
disconnected
automatically for
protection purpose
based on different
situations. NO NO Yes None
Indicates the
remaining capacity
of the battery by
displaying the
percentage of the
current capacity to
the total capacity. NO NO Yes None
Indicates the
current temperature
of the battery. NO NO Yes None
Indicates the phase

of the battery test. NO NO Yes None
Indicates the total
current of the
photovoltaic array
of the PMU. NO NO Yes None
Indicates the
current of the diesel
generator which is
managed by the
PMU. NO NO Yes None
Indicates the
temperature of
auxiliary battery
cabinet which is
connected to the
PMU.Value NULL
indicates that this
parameter is not
supported by the
hardware or the
Indicates the
software version of
the PMU. NO NO Yes None
Indicates the PCB

version of the PMU. NO NO Yes None
Indicates the
erasable
programmable logic
device version of
the PMU. NO NO Yes None
Indicate the
software compiling
time of the PMU. NO NO Yes None
Indicates the
version description
Indicates the
manufacturing date
Indicates the
manufacturer of the
PMU. NO NO Yes None
Indicates the PSU
intelligent shutdown
capability of the
PMU. NO NO Yes None
of the PSU
switch of the PMU. NO NO Yes None
Indicates the
remaining
discharging time of
a battery. NO NO Yes None
Indicates the
accumulated
charging time of a
battery, including
floating charging
time and equalized
charging time. NO NO Yes None
Indicates the
accumulated
sleeping time of a
battery. Battery
sleeping effectively
prolongs the battery
lifespan. NO NO Yes None
Indicates the
battery intelligent
management
capability of the
PMU. NO NO Yes None
Indicates the
battery intelligent
management mode
of the PMU.Value
NULL indicates that
this parameter is
not supported by
the hardware or the
Indicates the alarm
The alarm state of
the board can be
normal, warning,
details about the
definition of Alarm
Status, see ITU-T
Indicates the
the board, which
can be set to
Enabled or
Disabled. Enabled
indicates that
services can be
carried on the
board. Disabled
indicates that no
service can be
carried on the
Indicates the
physical operation
which can be
Uninstalled,
Inconsistent,
Unconfigured,
Power off, Fault,
Communication
combination of
various states. For
example, if a board
is not configured
and fails to
communicate with
the main control
and transmission
board, the physical
operation status of
the board is
Unconfigured,
Communication
Indicates the E-
a maximum of 2
KB. It is used to
record the
manufacturing
information about
equipment such as
the board, sub-
board, or optical
module. Among
board properties
file, "BoardType"
the board,
"BarCode" indicates
the bar code of the
board and is the
same as the code
labeled on the
board, and "Item"
indicates the BOM
Indicates the type

Indicates the bar

code of the board
Indicates the
description about
the services and
functions provided
by the board or the
Indicates the
manufacturing date
of the board or the
Indicates the
manufacturer of the
board or the
Indicates the issue
number of the
Indicates the type
Indicates the
temperature of a
Indicates the
temperature of the
Indicates the type

Indicates the
software version of
Indicates the
hardware version of
Indicates the
BootROM version
Indicates the
number of the
cabinet where the
PMU managing the
diesel generator is
Indicates the
number of the
subrack where the
PMU managing the
diesel generator is
Indicates the
number of the slot
where the PMU
managing the
diesel generator is
Indicates whether
intelligent control of
the diesel generator
is enabled. When
intelligent control is
enabled, the PMU
automatically
controls the diesel
generator according
to the preset
parameters, thus
reducing the
operation cost of
the diesel LBFD-004012 /
generator. NO NO No TDLBFD-004012
Indicates the
maximum rated
output power of the
diesel generator. It
should be
configured
according to the
rated output power
printed on the name
plate of the diesel LBFD-004012 /
generator. NO NO No TDLBFD-004012
Indicates the oil

level of the diesel
generator. NO NO Yes None
Indicates the
current of the diesel
generator. NO NO Yes None
Indicates the total
running time of the
diesel generator. NO NO Yes None
Indicates the
number of the
cabinet where the
PMU managing the
battery is located. YES NO No None
Indicates the
number of the
subrack where the
PMU managing the
Indicates the
number of the slot
where the PMU
managing the
OUTER, the battery
temperature sensor
is connected to the
BAT_TEM2 port.
The configuration
data on the
maintenance
console must be set
based on the actual
installation,
enabling the PMU
to select the correct
port for battery
temperature
management. In
power cabinets
other than APM30s
of versions 301 and
302, the battery
temperature is
reported to the
PMU through the
RS485 bus. Under
this circumstance,
the PMU can
always select the
correct battery
temperature for
temperature
management. This
parameter is set to
INNER to avoid a
configuration
conflict between
different modes of a
multi-mode base
station. NO NO No LOFD-001071
Indicates the
scheduled boost
charging interval.
Batteries are boost-
charged at this
interval (in the unit
of day), which
keeps the batteries
fully charged. This
parameter is
configured
according to the
instructions
provided by
manufacturers. NO NO No None
Indicates the boost
charging voltage.
Boost charge is
used to quickly
recover the
capacity of
batteries. During
the boost charge,
the charging
voltage is relatively
high. After the
batteries are
discharged, the
system
automatically starts
boost charge on the
batteries. This
parameter is
configured
according to the
instructions
provided by
manufacturers. NO NO No None
Indicates the
capacity of battery
1. This parameter
should be set
according to the
actual situation.
Incorrect
configuration may
reduce the life span
of the battery. NO NO No LOFD-001071
Indicates the
battery charging
current limiting
coefficient.
Charging coefficient
x Storage capacity
= Maximum
charging current.
When the charging
current is not
smaller than the
maximum charging
current plus 5 A, an
ALM-25625 Battery
Current Abnormal
alarm is reported.
This parameter is
configured
according to the
instructions
provided by
manufacturers. NO NO No LOFD-001071
Indicates the
floating charging
voltage. Floating
charge is used to
compensate for the
power loss of the
batteries due to
self-discharge. The
floating charging
voltage is lower
than the boost
charging voltage.
This parameter is
configured
according to the
instructions
provided by
Indicates whether
to enable battery
disconnection
against high
temperature. NO NO No LOFD-001071
Indicates the
temperature above
which the battery is
powered off
automatically under
the condition that
HtempShutdownFlg
is enabled. NO NO No LOFD-001071
Indicates whether
to enable battery
power-off against
low voltage. NO NO No LOFD-001071
Indicates the
voltage below
which the battery is
powered off
automatically under
the condition that
LvolShutdownFlg is
enabled. NO NO No LOFD-001071
Indicates the
increased or
reduced charging
voltage of every
battery when the
ambient
temperature is 1
degree Celsius (2
degree Fahrenheit)
higher or lower than
the standard
temperature
specified by
manufacturers. This
parameter should
be set according to
the instructions
provided by
Indicates the lower

When the battery
temperature is
below the lower
limit, an ALM-25650
Environmental
Temperature
Abnormal alarm is
reported. NO NO No LOFD-001071
Indicates the upper
When the battery
temperature
exceeds the upper
limit, an ALM-25650
Environmental
Temperature
Abnormal alarm is
reported. NO NO No LOFD-001071
Indicates the
number of battery
groups. NO NO No LOFD-001071
Indicates the type

Indicates the
number of times
that the battery is
powered off. NO NO Yes None
Indicates the
number of times
that the battery is
charged in half an
hour. NO NO Yes None
Indicates the
number of times
that the battery is
charged when the
battery is charged
for more than half
an hour and less
than one hour or for
one hour. NO NO Yes None
Indicates the
number of times
that the battery is
charged when the
battery is charged
for more than one
hour and less than
two hours or for two
hours. NO NO Yes None
Indicates the
number of times
that the battery is
charged when the
battery is charged
for more than two
hours and less than
three hours or for
three hours. NO NO Yes None
Indicates the
number of times
that the battery is
charged when the
battery is charged
for more than three
hours and less than
four hours or for
four hours. NO NO Yes None
Indicates the
number of times
that the battery is
charged when the
battery is charged
for more than four
hours and less than
five hours or for five
Indicates the
number of times
that the battery is
charged when the
battery is charged
for more than five
hours and less than
six hours or for six
Indicates the
number of times
that the battery is
charged when the
battery is charged
for more than six
hours and less than
seven hours or for
seven hours. NO NO Yes None
Indicates the
number of times
that the battery is
charged when the
battery is charged
for more than seven
hours and less than
eight hours or for
eight hours. NO NO Yes None
Indicates the
number of times
that the battery is
charged in more
than eight hours. NO NO Yes None
Indicates the
number of times
that the battery is
discharged in half
an hour. NO NO Yes None
Indicates the
number of times
that the battery is
discharged when
the battery is
discharged for more
than half an hour
and less than one
hour or for one
hour. NO NO Yes None
Indicates the
number of times
that the battery is
discharged when
the battery is
discharged for more
than one hour and
less than two hours
or for two hours. NO NO Yes None
Indicates the
number of times
that the battery is
discharged when
the battery is
discharged for more
than two hours and
less than three
hours or for three
Indicates the
number of times
that the battery is
discharged when
the battery is
discharged for more
than three hours
and less than four
hours or for four
Indicates the
number of times
that the battery is
discharged when
the battery is
discharged for more
than four hours and
less than five hours
or for five hours. NO NO Yes None
Indicates the
number of times
that the battery is
discharged when
the battery is
discharged for more
than five hours and
less than six hours
or for six hours. NO NO Yes None
Indicates the
number of times
that the battery is
discharged when
the battery is
discharged for more
than six hours and
less than seven
hours or for seven
Indicates the
number of times
that the battery is
discharged when
the battery is
discharged for more
than seven hours
and less than eight
hours or for eight
Indicates the
number of times
that the battery is
discharged in more
than eight hours. NO NO Yes None
Indicates the date

when the battery is
installed. The
scheduled tests for
the battery are
dependent on the
installation date. NO NO Yes None
Indicates the
capacity of battery
2. This parameter
should be set
according to the
actual situation.
Incorrect
configuration may
reduce the life span
Indicates the
number of the
cabinet where the
PMU managing the
Indicates the
number of the
subrack where the
PMU managing the
Indicates the
number of the slot
where the PMU
managing the
Indicates the
duration of
discharging the
battery with the
current of 0.05C10
to the moment
when the
discharging voltage
is terminated. C10
indicates the
nominal capacity of
the battery, and
0.05C10 indicates
that the battery is
discharged with the
current of 0.05 x
norminal capacity of
the battery. For
example, if the
battery capacity is
100 AH, 0.05C10
indicates that the
battery is
discharged with the
current of 5 AH. NO NO No None
Indicates the
duration of
discharging the
battery with the
current of 0.1C10 to
the moment when
the discharging
voltage is
terminated. C10
indicates the
nominal capacity of
the battery, and
0.1C10 indicates
that the battery is
discharged with the
current of 0.1 x
the battery. For
example, if the
battery capacity is
100 AH, 0.1C10
indicates that the
battery is
discharged with the
Indicates the
duration of
discharging the
battery with the
the moment when
the discharging
voltage is
terminated. C10
indicates the
nominal capacity of
the battery, and
0.2C10 indicates
that the battery is
discharged with the
current of 0.2 x
the battery. For
example, if the
battery capacity is
100 AH, 0.2C10
indicates that the
battery is
discharged with the
Indicates the
duration of
discharging the
battery with the
the moment when
the discharging
voltage is
terminated. C10
indicates the
nominal capacity of
the battery, and
0.3C10 indicates
that the battery is
discharged with the
current of 0.3 x
nominal capacity of
the battery. For
example, if the
battery capacity is
100 AH, 0.3C10
indicates that the
battery is
discharged with the
Indicates the
duration of
discharging the
battery with the
the moment when
the discharging
voltage is
terminated. C10
indicates the
nominal capacity of
the battery, and
0.4C10 indicates
that the battery is
discharged with the
current of 0.4 x
nominal capacity of
the battery. For
example, if the
battery capacity is
100 AH, 0.4C10
indicates that the
battery is
discharged with the
Indicates the
duration of
discharging the
battery with the
current x 0.5C10 to
the moment when
the discharging
voltage is
terminated. C10
indicates the
nominal capacity of
the battery, and
0.5C10 indicates
that the battery is
discharged with the
current of 0.5 x
nominal capacity of
the battery. For
example, if the
battery capacity is
100 AH, 0.5C10
indicates that the
battery is
discharged with the
Indicates the
duration of
discharging the
battery with the
the moment when
the discharging
voltage is
terminated. C10
indicates the
nominal capacity of
the battery, and
0.6C10 indicates
that the battery is
discharged with the
current of 0.6 x
nominal capacity of
the battery. For
example, if the
battery capacity is
100 AH, 0.6C10
indicates that the
battery is
discharged with the
Indicates the
duration of
discharging the
battery with the
the moment when
the discharging
voltage is
terminated. C10
indicates the
nominal capacity of
the battery, and
0.7C10 indicates
that the battery is
discharged with the
current of 0.7 x
nominal capacity of
the battery. For
example, if the
battery capacity is
100 AH, 0.7C10
indicates that the
battery is
discharged with the
Indicates the
duration of
discharging the
battery with the
the moment when
the discharging
voltage is
terminated. C10
indicates the
nominal capacity of
the battery, and
0.8C10 indicates
that the battery is
discharged with the
current of 0.8 x
nominal capacity of
the battery. For
example, if the
battery capacity is
100 AH, 0.8C10
indicates that the
battery is
discharged with the
Indicates the
duration of
discharging the
battery with the
the moment when
the discharging
voltage is
terminated. C10
indicates the
nominal capacity of
the battery, and
0.9C10 indicates
that the battery is
discharged with the
current of 0.9 x
nominal capacity of
the battery. For
example, if the
battery capacity is
100 AH, 0.9C10
indicates that the
battery is
discharged with the
Indicates the
charging efficiency
of batteries. The
battery efficiency is
a percentage of
battery
performance to the
normal battery
capacity. For
example, a normal
battery can supply
power for 10 hours.
If a battery can
supply power for
only eight hours, its
battery efficiency is
80%. NO NO No None
Indicates the end

voltage of the
discharging test. NO NO No LOFD-001071
Indicates the
quantity of battery
in the battery group. NO NO No LOFD-001071
Indicates the time

limit of the
Indicates the time
limit for the
simplified
discharging test.
There are two types
of discharging tests
for a battery: a
standard test and a
simplified test. A
standard test
calculates the
battery efficiency,
and a simplified test
judges only the
quality of the
battery. NO NO No LOFD-001071
Indicates the end
voltage of the
simple discharging
test. NO NO No LOFD-001071
mode. It specifies
whether to use the
automatic test and
which automatic
test mode is used.
There are four
types of test
modes:
NOAUTOTEST (No
Auto Test), PERIOD
(Period Auto Test),
POWERCUT
(Power Off Auto
Test), and
PERIODPOWERC
UT (Period and
Power Off Auto
Test). No Auto Test:
indicates that the
battery test is
launched and
controlled by the
user. Period Auto
Test: indicates that
the battery test is
launched
automatically by the
system as
scheduled. Power
Off Auto Test:
indicates that the
battery test is
launched
system after the AC
power supply is cut
off. NO NO No LOFD-001071
Indicates the time
limit of the
scheduled
Indicates the time

limit for the
discharging test
delay when the
power is off or the
discharging test is
launched
automatically. The
interval between
two battery tests
must be greater
than this time limit.
Otherwise, the
execution of the
STR BATTST
command fails. NO NO No LOFD-001071
Indicates the
battery efficiency.
The battery is
normal when the
result is between
80% and 100%. NO NO Yes None
Indicates the
continued
discharge duration
Indicates the
voltage of the
battery when the
discharge is ended. NO NO Yes None
Indicates the
average current in
the process of the
battery discharge. NO NO Yes None
Indicates the
accumulated
discharged power
(Ah) from the
beginning of
discharge. NO NO Yes None
Indicates the
current temperature
Indicates the
number of the
cabinet where the
PSU is located. YES NO No None
Indicates the
number of the
subrack where the
PSU is located. YES NO No None
Indicates the
number of the slot
where the PSU is
Indicates the
running status of
the PSU. NO NO Yes None
Indicates the
manufacturing date
of the PSU. NO NO Yes None
Indicates the
manufacturer of the
PSU. NO NO Yes None
Indicates the PCB

version of the PSU. NO NO Yes None
Indicates the
erasable
programmable logic
device (EPLD)
version of the PSU. NO NO Yes None
Indicates the
compiling time of
the software
program in the
PSU. NO NO Yes None
Indicates the alarm

The alarm state of
the board can be
normal, warning,
details about the
definition of Alarm
Status, see ITU-T
Indicates the
the board, which
can be set to
Enabled or
Disabled. Enabled
indicates that
services can be
carried on the
board. Disabled
indicates that no
service can be
carried on the
Indicates the
physical operation
which can be
Uninstalled,
Inconsistent,
Unconfigured,
Power off, Fault,
Communication
combination of
various states. For
example, if a board
is not configured
and fails to
communicate with
the main control
and transmission
board, the physical
operation status of
the board is
Unconfigured,
Communication
Indicates the E-
a maximum of 2
KB. It is used to
record the
manufacturing
information about
equipment such as
the board, sub-
board, or optical
module. Among
board properties
file, "BoardType"
the board,
"BarCode" indicates
the bar code of the
board and is the
same as the code
labeled on the
board, and "Item"
indicates the BOM
Indicates the type

Indicates the bar

code of the board
Indicates the
description about
the services and
functions provided
by the board or the
Indicates the
manufacturing date
of the board or the
Indicates the
manufacturer of the
board or the
Indicates the issue
number of the
Indicates the type
Indicates the
temperature of a
Indicates the
temperature of the
Indicates the type

Indicates the
software version of
Indicates the
hardware version of
Indicates the
BootROM version
Indicates the
cabinet number of
the board where the
output port is
Indicates the
subrack number of
the board where the
output port is
Indicates the slot
number of the
board where the
output port is
Indicates the
number of the
output port. YES YES No None
Indicates the name LBFD-004012 /

of the output port. NO NO No TDLBFD-004012
Indicates the
enabled/disabled
state of the output LBFD-004012 /
port. NO NO No TDLBFD-004012
Indicates the
cabinet number of
the board where the
Indicates the
subrack number of
the board where the
Indicates the slot
number of the
board where the
Indicates the port

Indicates the
enabled/disabled
state of the port.
Alarms can be
detected and
reported through
the port only when
the state of the port LBFD-004012 /
is ON. NO NO No TDLBFD-004012
Indicates the alarm

ID bound to the
alarm port. This
parameter is
reported as the ID
of the alarm LBFD-004012 /
detected at the port. NO NO No TDLBFD-004012
Indicates the alarm

port types: analog
alarm port and
digital alarm port.
An analog alarm
port is used to
monitor the external
environment that
changes
continuously. The
port is supported
only by the EMU. A
digital alarm port is
used to monitor the
external
environment of
which the change is
indicated in
Boolean or discrete
values. It is
contained in the
EMU, PMU, TCU,
FMU, RRU, CCU,
and power boards.
The SC48200 PMU
and the EPS4815
PMU do not support LBFD-004012 /
digital ports. NO NO No TDLBFD-004012
Indicates the alarm
level. This
parameter specifies
whether alarms
generated by the
sensor over the port
are in high or low
voltage. The alarm
level is set
according to the
type of external LBFD-004012 /
sensor. NO NO No TDLBFD-004012
Indicates the alarm

upper limit. If the
environment
measurement value
is greater than the
alarm upper limit
configured for the
sensor, the alarm is
reported.
Environment
measurement value
= Measurement
lower limit +
(Measurement
upper limit -
Measurement lower
limit) x (Observed
electric current or
voltage - Output
lower limit)/(Output
upper limit - Output
lower
limit).Temperature
is measured in the
unit of degree
Celsius, voltage is
measured in the
unit of volt, and
current is measured
in the unit of LBFD-004012 /
milliampere. NO NO No TDLBFD-004012
Indicates the alarm
lower limit. If the
environment
measurement value
is smaller than the
alarm lower limit
configured for the
sensor, the alarm is
reported.
Environment
measurement value
= Measurement
lower limit +
(Measurement
upper limit -
Measurement lower
limit) x (Observed
electric current or
voltage - Output
lower limit)/(Output
upper limit - Output
lower
limit).Temperature
is measured in the
unit of degree
Celsius, voltage is
measured in the
unit of volt, and
current is measured
Indicates the
sensor type. The
user can set the
sensor type to
current type or
voltage type
according to the
actual external LBFD-004012 /
sensor. NO NO No TDLBFD-004012
Indicates the
measurement
upper limit of the
analog port. The
range is set based
on the actual
situations such as
the temperature
and
humidity.Temperatu
re is measured in
the unit of degree
Celsius, voltage is
measured in the
unit of volt, and
current is measured
Indicates the
measurement lower
limit of the analog
port. The range is
set based on the
actual situations
such as the
temperature and
humidity.Temperatu
re is measured in
the unit of degree
Celsius, voltage is
measured in the
unit of volt, and
current is measured
Indicates the upper
limit of the output
signals from the
analog port. For
sensors of either
the current type or
voltage type, the
upper limit should
be set according to
the specifications of LBFD-004012 /
the sensor. NO NO No TDLBFD-004012
Indicates the lower

limit of the output
signals from the
analog port. For
sensors of either
the current type or
voltage type, the
lower limit should
be set according to
the specifications of LBFD-004012 /
the sensor. NO NO No TDLBFD-004012
Indicates the
connection type
supported by the
NE.Compatible
connection mode
indicates that the
NE supports both
the common
connection mode
and the SSL
connection mode. NO NO No LBFD-004003
Indicates the
authentication
mode of the SSL
connection.If the
authentication
mode is set to
NONE, the NE
does not verify the
certificate of the
M2000 or LMT
during setup of an
SSL connection. In
this case, both
parties must
support the same
algorithm for
anonymous
authentication.If
authentication using
the peer certificate
is used, the NE
must verify the
certificate of the
M2000 or LMT
during setup of an
SSL connection. If
the certificate
verification fails, the
SSL connection
cannot be set up. NO NO No LBFD-004003
Indicates the login

type of the
authentication. NO NO No LBFD-004003
Indicates the policy
for logging in to the
Web LMT.
The value
COMPATIBLE
indicates that if http
is entered in the
address bar of an
IE browser, the
HTTP is used for
and after the login.
If https is entered in
the address bar of
an IE browser, the
HTTPS is used for
and after the login.
The value
HTTPS_ONLY
indicates that the
HTTPS is used for
and after the login
no matter whether
http or https is
entered in the
address bar of an
IE browser.
The value
LOGIN_HTTPS_O
NLY indicates that
the HTTPS is used
for login and the
HTTP is used after
the login no matter
whether http or
https is entered in
the address bar of LBFD-004003
an IE browser. NO NO No LBFD-004001
Indicates the
application ID. YES YES No None
Indicates the
application type. NO YES No None
Indicates the
application name. NO YES No None
Indicates the
application status. NO NO Yes None
Indicates the
application software
version. NO NO Yes None
Indicates the
number of the
cabinet where the
AAMU is located. YES YES No None
Indicates the
number of the
subrack where the
AAMU is located. YES YES No None
Indicates the slot

number of the
AAMU. YES YES No None
Indicates the
position where the
AAS is installed in
the topology. NO YES No None
Indicates the ID of
an RRU chain or
ring which the AAS
is inserted in. NO YES No None
Indicates where the

AAS is inserted in
an RRU chain or
ring.It is calculated
from the start port
one by one. NO YES No None
Indicates the
number of the
cabinet where the
AARU is located. YES YES No None
Indicates the
number of the
subrack where the
AARU is located. YES YES No None
Indicates the slot

number of the
AARU. YES YES No None
Indicates the AARU

name. NO NO No None
Indicates the
administrative state. NO NO No None
Indicates the
minimum effective
bandwidth of the
carrier. NO NO No None
Indicates the
intermediate
frequency offset of
the AARU. This
parameter is set by
the user during the
network planning to
avoid the external
signal interference
around the current
received frequency,
and accordingly
improve the
receiver sensitivity
of the system. This
parameter,
however, is not
recommended to be
used. NO NO No None
Indicates the
number of RX
channels of the
AARU. NO YES No None
Indicates the
number of TX
channels of the
AARU. NO YES No None
to enable TX
channels on the
AARU. On the
AARU, all TX
channels must be
simultaneously
enabled or
disabled. NO NO No None
Indicates the
working standard of
the AARU. NO YES No None
Indicates the
number of a virtual
antenna
corresponding to
the AARU. NO YES No None
Indicates the
maximum horizontal
azimuth supported
by the virtual
antenna subunit
corresponding to
the AARU. NO NO Yes None
Indicates the
minimum horizontal
azimuth supported
by the virtual
antenna subunit
corresponding to
Indicates the
maximum horizontal
beamwidth
supported by the
virtual antenna
subunit
corresponding to
Indicates the
minimum horizontal
beamwidth
supported by the
virtual antenna
subunit
corresponding to
Indicates the
maximum tilt
supported by the
virtual antenna
subunit
corresponding to
Indicates the
minimum tilt
supported by the
virtual antenna
subunit
corresponding to
Indicates the
maximum tilt
difference between
carriers supported
by the virtual
antenna subunit
corresponding to
Indicates the
number of the
cabinet where the
AAS is located. YES YES No None
Indicates the
number of the
subrack where the
AAS is located. YES YES No None
Indicates the AAS

name. NO NO No None
Indicates the
access direction of
the service plane. NO NO Yes None
Indicates the
number of the
cabinet where the
RHUB is located. YES NO No None
Indicates the
number of the
subrack where the
RHUB is located. YES NO No None
Indicates the slot

number of the
RHUB. YES NO No None
Indicates the ID of
the RHUB chain. It
uniquely identifies a
chain within a base
Indicates the
position of the
RHUB on the RRU
chain/ring. It is
calculated from the
start port one by
one. NO NO No None
Indicates the name

of the RHUB. NO NO No None
Indicates the alarm
The alarm state of
the board can be
normal, warning,
details about the
definition of Alarm
Status, see ITU-T
Indicates the
the board, which
can be set to
Enabled or
Disabled. Enabled
indicates that
services can be
carried on the
board. Disabled
indicates that no
service can be
carried on the
Indicates the
physical operation
which can be
Uninstalled,
Inconsistent,
Unconfigured,
Power off, Fault,
Communication
combination of
various states. For
example, if a board
is not configured
and fails to
communicate with
the main control
and transmission
board, the physical
operation status of
the board is
Unconfigured,
Communication
Indicates the E-
a maximum of 2
KB. It is used to
record the
manufacturing
information about
equipment such as
the board, sub-
board, or optical
module. Among
board properties
file, "BoardType"
the board,
"BarCode" indicates
the bar code of the
board and is the
same as the code
labeled on the
board, and "Item"
indicates the BOM
Indicates the type

Indicates the bar

code of the board
Indicates the
description about
the services and
functions provided
by the board or the
Indicates the
manufacturing date
of the board or the
Indicates the
manufacturer of the
board or the
Indicates the issue
number of the
Indicates the type
Indicates the
temperature of a
Indicates the
temperature of the
Indicates the type

Indicates the
software version of
Indicates the
hardware version of
Indicates the
BootROM version
Indicates the
by decreasing the
TX power of
carriers sharing TX
channels by 3 dB.
2. In the scenario
where two TX
channels are
configured with
transmit diversity
and MIMO, the TX
power of one
channel is
decreased by 3 dB
if a major VSWR
alarm is generated
in this channel.
Meanwhile, the TX
power of the other
channel also needs
to be decreased by
3 dB for the power
balance of TX
channels.
3. In the scenario
where multi modes
share TX channels
and a major VSWR
alarm is generated
in one channel, this
TX channel is shut
down if the switch is
set to ON in any
mode. The power of
this channel is
degraded if this
switch is set to OFF
in all the modes. NO NO No None
Indicates the
VSWR alarm post-
processing
threshold. If the
VSWR alarm post-
processing switch is
set to ON and the
VSWR is greater
than the threshold,
post-processing is
performed to shut
down the TX
channel. In this
case, the TX
channel cannot be
open automatically
after the VSWR is
normal. If this
parameter is set to
different values in
multimode base
station, the smallest
value takes effect in
all the modes. NO NO No None
reported falsely.
To stabilize the
false alarm
probability to 1%,
0.1%, and 0.01%,
you need to set the
VSWR alarm
threshold to the
following
recommended
values:
When the VSWR
required by the
engineering quality
is smaller than or
equal to 1.4, the
recommended
thresholds are 1.8,
2.0, and 2.4,
respectively.
When the VSWR
required by the
engineering quality
is smaller than or
equal to 1.5, the
recommended
thresholds are 2.0,
2.2, and 2.6,
respectively.
set to different
values in different
modes of a
multimode base
Indicates the
position of the
RRU, RFU on the
chain or ring. It is
calculated from the
start port one by
one. NO YES No None
Indicates the ID of
the RRU or RFU
chain/ring. NO YES No None
Indicates the
position where the
RRU or RFU is
installed in the
topology. There are
two types of
positions for the
RRU or RFU:
TRUNK and
BRANCH.
BRANCH indicates
that the RRU is
connected to the
RHUB. TRUNK
indicates that the
RRU or RFU is
located on the main
chain/ring. The
main chain/ring is
connected to the
optical port on the
baseband
processing board. NO NO No None
Indicates the
working mode of
the RRU or RFU.
MRFU, MRRU, and
PRRU support both
single-mode and
multi-mode base
stations. LRFU
supports only
LTE_FDD and
LRRU supports
LTE_TDD and
LTE_FDD. NO YES No None
Indicates the
number of RX
channels of the
RRU or RFU. The
RX channels are
numbered starting
from 0 and must be
numbered in the
sequence of 0, 1, 2,
3, 4. 0
corresponds to
R0A, 1 corresponds
to R0B, and the rest
can be deduced by
analogy. Ensure
that sufficient RX
channels are
configured before
using an RX
channel No. For
example, if R0D is
used, at least four
RX channels must
be configured. NO YES No None
Indicates the
number of TX
channels of the
RRU or RFU. The
TX channels are
numbered starting
from 0 and must be
numbered in the
3, 4. 0
corresponds to
R0A, 1 corresponds
can be deduced by
analogy. Ensure
that sufficient TX
channels are
configured before
using an TX
channel No. For
example, if R0D is
used, at least four
TX channels must
Indicates the
number of carriers
on each RX
Indicates the
number of carriers
on each TX
Indicates the total
output power of
RRU/RFU TX
channels. NO NO Yes None
Indicates the UL
channel gain. NO NO Yes None
Indicates the
RRU/RFU level on
the trunk of the
chain/ring. NO NO Yes None

number of the RRU
or RFU. NULL
means that the
serial number fail to
Indicates the
standards that are
supported by the
RRU or RFU.
Invalid means that
the standards fail to
Indicates the
access direction of
Indicates the
intermediate
frequency offset of
the RRU or RFU.
This parameter is
set by the user
during the network
planning to avoid
the external signal
interference around
the current received
frequency, and
accordingly improve
the receiver
sensitivity of the
system. This
parameter,
however, is not
recommended to be
used. NO NO No None
Indicates the RF
desensitization
intensity of the RRU
or RFU. When the
air interface is
under strong
blocking or
interference, the
anti-interference
capability of RF
modules can be
improved by
decreasing the gain
on RX channels
and lowering the
receiver sensitivity.
Currently, this
parameter can only
be set to 0 dB or 10
dB. When the
parameter is set to
10 dB, the uplink
is lowered by 10
dB. Therefore, the
anti-interference
capability is
improved. NO NO No None
Indicates whether
the RRU or RFU
supports the UL
features. NO NO Yes None
Indicates the
minimum effective
bandwidth of the
Indicates the
undercurrent
protection switch. If
an undercurrent
alarm is generated,
the ALD power
switch for this RRU
or RFU is
automatically
turned off only
when this
parameter is set to
ENABLE. NULL
means that this
RRU or RFU does
not support the
undercurrent
protection function.
Only UMTS
currently support
Indicates whether
the ALD is reused.
Value 0 indicates
that the ALD is not
reused. Value 1
indicates that the
ALD is reused in
Greece. NO NO No None

number of the RU
in the AAU. The
serial numbers of
antennas on other
RF modules are
Indicates the slot
number of the RU
in the AAU. The
value of this
parameter is NULL
for other RF
modules. The slots
of RUs are
numbered from 0 in
ascending order
from bottom to top. NO NO Yes None
Indicates the type
of an RF module,
which must be the
same as the
hardware type of
the RF module.
After this parameter
is specified, the
CME checks the
configurations of
power, carrier, and
receive and
transmit capabilities
based on the value
of this parameter.
This ensures that
these
configurations are
correct before they
take effect. Only
GSM currently
support this
Indicates the
cabinet number of
RRU2/RFU2 for RF
interconnection.For
RF interconnection
in outer
interconnection
mode, value NULL
is displayed
because the
cabinet No.,
subrack No., and
slot No. of the peer
RRU remain
unknown. NO YES No None
Indicates the slot

number of
RRU2/RFU2 for RF
interconnection.For
RF interconnection
in outer
interconnection
mode, value NULL
is displayed
because the
cabinet No.,
subrack No., and
RRU remain
Indicates the
subrack number of
RRU2/RFU2 for RF
interconnection.For
RF interconnection
in outer
interconnection
mode, value NULL
is displayed
because the
cabinet No.,
subrack No., and
RRU remain
Indicates the RF
interconnection
type.Intra
interconnection
means the
interconnection
between two RRUs
or RFUs belonging
to one base station
system. Outer
connection means
the interconnection
between two RRUs
or RFUs belonging
to two base station
systems. NO NO No None
Indicates the power

amplifier efficiency
improvement switch
for an RF module.
When this
parameter is set to
ON, the power
of an RF module is
improved. When
this parameter is
set to OFF, the
power amplifier
efficiency of an RF
module is not
improved. You can
run the DSP RRU
command to query
whether an RF
module supports
the power amplifier
efficiency
improvement. NO NO No LOFD-001025
Indicates whether
an RF module
supports the power
improvement. NO NO Yes None
Indicates the alarm

The alarm state of
the board can be
normal, warning,
details about the
definition of Alarm
Status, see ITU-T
Indicates the
the board, which
can be set to
Enabled or
Disabled. Enabled
indicates that
services can be
carried on the
board. Disabled
indicates that no
service can be
carried on the
Indicates the
physical operation
which can be
Uninstalled,
Inconsistent,
Unconfigured,
Power off, Fault,
Communication
combination of
various states. For
example, if a board
is not configured
and fails to
communicate with
the main control
and transmission
board, the physical
operation status of
the board is
Unconfigured,
Communication
Indicates the E-
a maximum of 2
KB. It is used to
record the
manufacturing
information about
equipment such as
the board, sub-
board, or optical
module. Among
board properties
file, "BoardType"
the board,
"BarCode" indicates
the bar code of the
board and is the
same as the code
labeled on the
board, and "Item"
indicates the BOM
Indicates the type

Indicates the bar

code of the board
Indicates the
description about
the services and
functions provided
by the board or the
Indicates the
manufacturing date
of the board or the
Indicates the
manufacturer of the
board or the
Indicates the issue
number of the
Indicates the type
Indicates the
temperature of a
Indicates the
temperature of the
Indicates the type

Indicates the
software version of
Indicates the
hardware version of
Indicates the
BootROM version
Indicates the
number of the
cabinet where the
RFU is located. YES NO No None
Indicates the
number of the
subrack where the
RFU is located. YES YES No None
Indicates the slot
number of the RFU. YES YES No None
Indicates the type
of the RFU. NO YES No None
Indicates the
Indicates the alarm

The alarm state of
the board can be
normal, warning,
details about the
definition of Alarm
Status, see ITU-T
Indicates the
the board, which
can be set to
Enabled or
Disabled. Enabled
indicates that
services can be
carried on the
board. Disabled
indicates that no
service can be
carried on the
Indicates the
physical operation
which can be
Uninstalled,
Inconsistent,
Unconfigured,
Power off, Fault,
Communication
combination of
various states. For
example, if a board
is not configured
and fails to
communicate with
the main control
and transmission
board, the physical
operation status of
the board is
Unconfigured,
Communication
Indicates the E-
a maximum of 2
KB. It is used to
record the
manufacturing
information about
equipment such as
the board, sub-
board, or optical
module. Among
board properties
file, "BoardType"
the board,
"BarCode" indicates
the bar code of the
board and is the
same as the code
labeled on the
board, and "Item"
indicates the BOM
Indicates the type

Indicates the bar

code of the board
Indicates the
description about
the services and
functions provided
by the board or the
Indicates the
manufacturing date
of the board or the
Indicates the
manufacturer of the
board or the
Indicates the issue
number of the
Indicates the type
Indicates the
temperature of a
Indicates the
temperature of the
Indicates the type

by decreasing the
TX power of
carriers sharing TX
channels by 3 dB.
2. In the scenario
where two TX
channels are
configured with
transmit diversity
and MIMO, the TX
power of one
channel is
decreased by 3 dB
if a major VSWR
alarm is generated
in this channel.
Meanwhile, the TX
power of the other
channel also needs
to be decreased by
3 dB for the power
balance of TX
channels.
3. In the scenario
where multi modes
share TX channels
and a major VSWR
alarm is generated
TX channel is shut
set to ON in any
mode. The power of
this channel is
degraded if this
Indicates the
VSWR alarm post-
processing
threshold. If the
VSWR alarm post-
set to ON and the
VSWR is greater
than the threshold,
post-processing is
performed to shut
down the TX
channel. In this
case, the TX
channel cannot be
open automatically
after the VSWR is
normal. If this
parameter is set to
different values in
multimode base
reported falsely.
To stabilize the
false alarm
probability to 1%,
0.1%, and 0.01%,
you need to set the
VSWR alarm
threshold to the
following
recommended
values:
When the VSWR
required by the
engineering quality
is smaller than or
equal to 1.4, the
recommended
thresholds are 1.8,
2.0, and 2.4,
respectively.
When the VSWR
required by the
engineering quality
is smaller than or
equal to 1.5, the
recommended
thresholds are 2.0,
2.2, and 2.6,
respectively.
set to different
values in different
modes of a
multimode base
Indicates the
position of the
RRU, RFU on the
calculated from the
start port one by
one. NO YES No None
Indicates the ID of
the RRU or RFU
Indicates the
position where the
RRU or RFU is
installed in the
topology. There are
two types of
positions for the
RRU or RFU:
TRUNK and
BRANCH.
BRANCH indicates
that the RRU is
connected to the
RHUB. TRUNK
indicates that the
RRU or RFU is
located on the main
chain/ring. The
main chain/ring is
connected to the
optical port on the
baseband
Indicates the
working mode of
the RRU or RFU.
MRFU, MRRU, and
PRRU support both
single-mode and
multi-mode base
stations. LRFU
supports only
LTE_FDD and
LRRU supports
LTE_TDD and
Indicates the
number of RX
channels of the
RRU or RFU. The
RX channels are
numbered starting
from 0 and must be
numbered in the
3, 4. 0
corresponds to
R0A, 1 corresponds
can be deduced by
analogy. Ensure
that sufficient RX
channels are
configured before
using an RX
channel No. For
example, if R0D is
used, at least four
RX channels must
Indicates the
number of TX
channels of the
RRU or RFU. The
TX channels are
numbered starting
from 0 and must be
numbered in the
3, 4. 0
corresponds to
R0A, 1 corresponds
can be deduced by
analogy. Ensure
that sufficient TX
channels are
configured before
using an TX
channel No. For
example, if R0D is
used, at least four
TX channels must
Indicates the
number of carriers
on each RX
Indicates the
number of carriers
on each TX
Indicates the total
output power of
RRU/RFU TX
Indicates the UL
Indicates the
RRU/RFU level on
the trunk of the

number of the RRU
or RFU. NULL
means that the
Indicates the
standards that are
supported by the
RRU or RFU.
Invalid means that
Indicates the
access direction of
Indicates the
intermediate
frequency offset of
the RRU or RFU.
This parameter is
set by the user
during the network
planning to avoid
the external signal
interference around
frequency, and
accordingly improve
the receiver
sensitivity of the
system. This
parameter,
however, is not
recommended to be
used. NO NO No None
Indicates the RF
desensitization
or RFU. When the
air interface is
under strong
blocking or
interference, the
anti-interference
capability of RF
modules can be
improved by
decreasing the gain
on RX channels
and lowering the
Currently, this
parameter can only
dB. When the
parameter is set to
10 dB, the uplink
is lowered by 10
dB. Therefore, the
anti-interference
capability is
Indicates whether
the RRU or RFU
supports the UL
Indicates the
minimum effective
bandwidth of the
Indicates the
undercurrent
an undercurrent
alarm is generated,
the ALD power
switch for this RRU
or RFU is
automatically
turned off only
when this
parameter is set to
ENABLE. NULL
means that this
RRU or RFU does
not support the
undercurrent
Only UMTS
currently support
Indicates whether
the ALD is reused.
Value 0 indicates
that the ALD is not
reused. Value 1
indicates that the
ALD is reused in

number of the RU
in the AAU. The
serial numbers of
antennas on other
RF modules are
Indicates the slot
number of the RU
in the AAU. The
value of this
parameter is NULL
for other RF
modules. The slots
of RUs are
numbered from 0 in
ascending order
Indicates the type
of an RF module,
which must be the
same as the
hardware type of
the RF module.
is specified, the
CME checks the
configurations of
power, carrier, and
receive and
based on the value
of this parameter.
This ensures that
these
configurations are
correct before they
take effect. Only
GSM currently
support this
Indicates the
cabinet number of
RRU2/RFU2 for RF
interconnection.For
RF interconnection
in outer
interconnection
mode, value NULL
is displayed
because the
cabinet No.,
subrack No., and
RRU remain
Indicates the slot

number of
RRU2/RFU2 for RF
interconnection.For
RF interconnection
in outer
interconnection
mode, value NULL
is displayed
because the
cabinet No.,
subrack No., and
RRU remain
Indicates the
subrack number of
RRU2/RFU2 for RF
interconnection.For
RF interconnection
in outer
interconnection
mode, value NULL
is displayed
because the
cabinet No.,
subrack No., and
RRU remain
Indicates the RF
interconnection
type.Intra
interconnection
means the
interconnection
between two RRUs
or RFUs belonging
to one base station
system. Outer
connection means
the interconnection
between two RRUs
or RFUs belonging
to two base station
Indicates the
software version of
Indicates the
hardware version of
Indicates the
BootROM version
Indicates the power
improvement switch
for an RF module.
When this
parameter is set to
ON, the power
of an RF module is
improved. When
this parameter is
set to OFF, the
power amplifier
efficiency of an RF
module is not
improved. You can
run the DSP RRU
command to query
whether an RF
module supports
the power amplifier
efficiency
Indicates whether
an RF module
supports the power
Indicates the
number of the
cabinet where the
RRU is located. YES NO No None
Indicates the
number of the
subrack where the
RRU is located. YES YES No None
Indicates the
number of the slot
where the RRU is
Indicates the RRU

name. NO NO No None
Indicates the type
of the RRU. NO YES No None
Indicates the
number of the slot
where the
baseband board
providing clock
signals to the RRU
is installed. NO NO Yes None
Indicates the
number of the port
on the baseband
board providing the
clock source to the
RRU. NO NO Yes None
Indicates the
number of the RRU
port through which
clock signals are
obtained. NO NO Yes None
Indicates the
Indicates the alarm
The alarm state of
the board can be
normal, warning,
details about the
definition of Alarm
Status, see ITU-T
Indicates the
the board, which
can be set to
Enabled or
Disabled. Enabled
indicates that
services can be
carried on the
board. Disabled
indicates that no
service can be
carried on the
Indicates the
physical operation
which can be
Uninstalled,
Inconsistent,
Unconfigured,
Power off, Fault,
Communication
combination of
various states. For
example, if a board
is not configured
and fails to
communicate with
the main control
and transmission
board, the physical
operation status of
the board is
Unconfigured,
Communication
Indicates the E-
a maximum of 2
KB. It is used to
record the
manufacturing
information about
equipment such as
the board, sub-
board, or optical
module. Among
board properties
file, "BoardType"
the board,
"BarCode" indicates
the bar code of the
board and is the
same as the code
labeled on the
board, and "Item"
indicates the BOM
Indicates the type

Indicates the bar

code of the board
Indicates the
description about
the services and
functions provided
by the board or the
Indicates the
manufacturing date
of the board or the
Indicates the
manufacturer of the
board or the
Indicates the issue
number of the
Indicates the type
Indicates the
temperature of a
Indicates the
temperature of the
Indicates the type

by decreasing the
TX power of
carriers sharing TX
channels by 3 dB.
2. In the scenario
where two TX
channels are
configured with
transmit diversity
and MIMO, the TX
power of one
channel is
decreased by 3 dB
if a major VSWR
alarm is generated
in this channel.
Meanwhile, the TX
power of the other
channel also needs
to be decreased by
3 dB for the power
balance of TX
channels.
3. In the scenario
where multi modes
share TX channels
and a major VSWR
alarm is generated
TX channel is shut
set to ON in any
mode. The power of
this channel is
degraded if this
Indicates the
VSWR alarm post-
processing
threshold. If the
VSWR alarm post-
set to ON and the
VSWR is greater
than the threshold,
post-processing is
performed to shut
down the TX
channel. In this
case, the TX
channel cannot be
open automatically
after the VSWR is
normal. If this
parameter is set to
different values in
multimode base
reported falsely.
To stabilize the
false alarm
probability to 1%,
0.1%, and 0.01%,
you need to set the
VSWR alarm
threshold to the
following
recommended
values:
When the VSWR
required by the
engineering quality
is smaller than or
equal to 1.4, the
recommended
thresholds are 1.8,
2.0, and 2.4,
respectively.
When the VSWR
required by the
engineering quality
is smaller than or
equal to 1.5, the
recommended
thresholds are 2.0,
2.2, and 2.6,
respectively.
set to different
values in different
modes of a
multimode base
Indicates the
position of the
RRU, RFU on the
calculated from the
start port one by
one. NO YES No None
Indicates the ID of
the RRU or RFU
Indicates the
position where the
RRU or RFU is
installed in the
topology. There are
two types of
positions for the
RRU or RFU:
TRUNK and
BRANCH.
BRANCH indicates
that the RRU is
connected to the
RHUB. TRUNK
indicates that the
RRU or RFU is
located on the main
chain/ring. The
main chain/ring is
connected to the
optical port on the
baseband
Indicates the
working mode of
the RRU or RFU.
MRFU, MRRU, and
PRRU support both
single-mode and
multi-mode base
stations. LRFU
supports only
LTE_FDD and
LRRU supports
LTE_TDD and
Indicates the
number of RX
channels of the
RRU or RFU. The
RX channels are
numbered starting
from 0 and must be
numbered in the
3, 4. 0
corresponds to
R0A, 1 corresponds
can be deduced by
analogy. Ensure
that sufficient RX
channels are
configured before
using an RX
channel No. For
example, if R0D is
used, at least four
RX channels must
Indicates the
number of TX
channels of the
RRU or RFU. The
TX channels are
numbered starting
from 0 and must be
numbered in the
3, 4. 0
corresponds to
R0A, 1 corresponds
can be deduced by
analogy. Ensure
that sufficient TX
channels are
configured before
using an TX
channel No. For
example, if R0D is
used, at least four
TX channels must
Indicates the
number of carriers
on each RX
channel.
number of carriers
on each TX
Indicates the total
output power of
RRU/RFU TX
Indicates the UL
Indicates the
RRU/RFU level on
the trunk of the

number of the RRU
or RFU. NULL
means that the
Indicates the
standards that are
supported by the
RRU or RFU.
Invalid means that
Indicates the
access direction of
Indicates the
intermediate
frequency offset of
the RRU or RFU.
This parameter is
set by the user
during the network
planning to avoid
the external signal
interference around
frequency, and
accordingly improve
the receiver
sensitivity of the
system. This
parameter,
however, is not
recommended to be
used. NO NO No None
Indicates the RF
desensitization
or RFU. When the
air interface is
under strong
blocking or
interference, the
anti-interference
capability of RF
modules can be
improved by
decreasing the gain
on RX channels
and lowering the
Currently, this
parameter can only
dB. When the
parameter is set to
10 dB, the uplink
is lowered by 10
dB. Therefore, the
anti-interference
capability is
Indicates whether
the RRU or RFU
supports the UL
Indicates the
minimum effective
bandwidth of the
Indicates the
undercurrent
an undercurrent
alarm is generated,
the ALD power
switch for this RRU
or RFU is
automatically
turned off only
when this
parameter is set to
ENABLE. NULL
means that this
RRU or RFU does
not support the
undercurrent
Only UMTS
currently support
Indicates whether
the ALD is reused.
Value 0 indicates
that the ALD is not
reused. Value 1
indicates that the
ALD is reused in

number of the RU
in the AAU. The
serial numbers of
antennas on other
RF modules are
Indicates the slot
number of the RU
in the AAU. The
value of this
parameter is NULL
for other RF
modules. The slots
of RUs are
numbered from 0 in
ascending order
Indicates the type
of an RF module,
which must be the
same as the
hardware type of
the RF module.
is specified, the
CME checks the
configurations of
power, carrier, and
receive and
based on the value
of this parameter.
This ensures that
these
configurations are
correct before they
take effect. Only
GSM currently
support this
Indicates the
cabinet number of
RRU2/RFU2 for RF
interconnection.For
RF interconnection
in outer
interconnection
mode, value NULL
is displayed
because the
cabinet No.,
subrack No., and
RRU remain
Indicates the slot

number of
RRU2/RFU2 for RF
interconnection.For
RF interconnection
in outer
interconnection
mode, value NULL
is displayed
because the
cabinet No.,
subrack No., and
RRU remain
Indicates the
subrack number of
RRU2/RFU2 for RF
interconnection.For
RF interconnection
in outer
interconnection
mode, value NULL
is displayed
because the
cabinet No.,
subrack No., and
RRU remain
Indicates the RF
interconnection
type.Intra
interconnection
means the
interconnection
between two RRUs
or RFUs belonging
to one base station
system. Outer
connection means
the interconnection
between two RRUs
or RFUs belonging
to two base station
Indicates the
software version of
Indicates the
hardware version of
Indicates the
BootROM version
Indicates the power
improvement switch
for an RF module.
When this
parameter is set to
ON, the power
of an RF module is
improved. When
this parameter is
set to OFF, the
power amplifier
efficiency of an RF
module is not
improved. You can
run the DSP RRU
command to query
whether an RF
module supports
the power amplifier
efficiency
Indicates whether
an RF module
supports the power
Indicates the ID of
the RRU chain. It
chain within a base
station. YES YES No None
Indicates the type
of the topology.In a
ring topology, the
service data is
transmitted on the
fiber optic cable
that carries the
HDLC link. In a load
sharing topology,
the service data is
transmitted on two
fiber optic cables
simultaneously,
which enhances the
transmission
capability. The
physical connection
in the ring topology
is similar to that in
the load sharing
topology. NO YES No None
Indicates the
backup mode of the
RRU chain/ring.
There are two
modes: cold backup
and hot backup.
Cold backup
indicates that when
the link on one end
of the chain/ring
fails, the service is
disrupted for a short
period of time, and
then re-established
on the other end of
the chain/ring. Hot
backup indicates
that when the link
on one end of the
chain/ring fails, the
service is taken
over by the other
end of the
chain/ring
immediately. There
is only one RRU on
the chain/ring in hot
backup mode.In the
RRUCHAIN MO, if
TT is set to RING
and BM is set to
HOT, the head
CPRI port and the
tail CPRI port of the
RRU ring must be
on different
baseband boards. NO NO No None
Indicates the
cabinet number of
the board where the
head CPRI port is
Indicates the
subrack number of
the board where the
head CPRI port is
Indicates the slot
number of the
board where the
head CPRI port is
Indicates the
number of the head
CPRI port. NO YES No None
Indicates the
cabinet number of
the board where the
tail CPRI port is
located.Value NULL
is displayed for the
RRU chain which
does not have a tail
CPRI port. NO NO No None
Indicates the
subrack number of
the board where the
tail CPRI port is
located.Value NULL
RRU chain which
CPRI port. NO NO No None
Indicates the slot
number of the
board where the tail
CPRI port is
located.Value NULL
RRU chain which
CPRI port. NO YES No None
Indicates the
number of the tail
CPRI port. Value
NULL is displayed
for the RRU chain
which does not
have a tail CPRI
Indicates the
breakpoint position
1 on the chain/ring.
When this
parameter is set to
255, the breakpoint
is disabled. NO NO No None
Indicates the
breakpoint position
2 on the chain/ring.
When this
parameter is set to
255, the breakpoint
is disabled. NO NO No None
Indicates the
access type of the
RRU. When
AccessType is set
to the local port, the
BBP is connected
to the RRU/RFU
through the CPRI
port. When
AccessType is set
to the peer port, the
peer BBP is directly
connected to the
RRU/RFU, and the
local BBP is
connected to the
peer BBP through
the IDX2 port on
the backplane. NO NO No None
Indicates the user-

defined rate. The
value AUTO
indicates the the
auto negotiation
mode is adopted.
The value 1.25
indicates that the
CPRI rate is 1.25
Gbit/s. The value
2.5 indicates that
the CPRI rate is 2.5
Gbit/s. The value
4.9 indicates that
Gbit/s. The value
6.1 indicates that
Gbit/s. The value
9.8 indicates that
Gbit/s. NO NO No None
Indicates the level
of the RRU chain. NO NO Yes None
Indicates the
number of RRUs
carried on the RRU
Indicates the
cabinet number of
the RRU or RFU
where the RX
channel of the RRU
or RFU is located. YES NO No None
Indicates the
subrack number of
the RRU or RFU
where the RX
channel of the RRU
or RFU is located. YES YES No None
Indicates the slot
number of the RRU
or RFU where the
RX channel of the
RRU or RFU is
Indicates the
number of the RX
channel of the RRU
or RFU.0
corresponds to
R0A, 1 corresponds
can be deduced by LOFD-001024 /
analogy. YES YES No TDLOFD-001024

switch of the RX
channel of the RRU
or RFU, which is set
to ON by default.
The switch can be
set by running the
MOD RXBRANCH LOFD-001024 /
command. NO NO No TDLOFD-001024
Indicates the
attenuation of the
RX channel of the LOFD-001024 /
RRU or RFU. NO NO No TDLOFD-001024

physical status of
the RX channel of
the RRU or RFU,
the switch of which
is set to ON by
default. When the
logical switch of the
RX channel is OFF,
the physical switch
of the RX channel
must be OFF. When
the logical switch of
the RX channel is
ON and the RRU is
running properly,
the physical switch
of the RX channel
of the RRU can be
ON. NO NO Yes None

correction value of
the Received Total
Wideband Power
(RTWP) for carrier
0. The big offset
between the RTWP
in empty load and
the theoretical
background noise
can be adjusted
through the setting
of initial correction
value of the RTWP. NO NO No None
correction value of
the RTWP for
carrier 1. NO NO No None
correction value of
the RTWP for
correction value of
the RTWP for
correction value of
the RTWP for
correction value of
the RTWP for
correction value of
the RTWP for
correction value of
the RTWP for
Indicates the
minimum uplink
frequency
supported by the
RRU or RFU band
1. For example, if
this parameter is
set to 9250, the
minimum uplink
frequency of the
RRU is 9250 x 0.1
MHz, which equals
to 925 MHz. NO NO Yes None
Indicates the
maximum uplink
frequency
supported by the
RRU or RFU band
1. For example, if
this parameter is
set to 9450, the
maximum uplink
frequency of the
RRU is 9450 x 0.1
MHz, which equals
Indicates the
bandwidth
supported by each
TX channel band 1
in the downlink.
This bandwidth is
an instantaneous
bandwidth. NO NO Yes None
Indicates the
minimum uplink
frequency
supported by the
RRU or RFU band
2.This parameter is
NULL,when the
RRU does not
supported many
bands. For
example, if this
parameter is set to
9250, the minimum
uplink frequency of
the RRU is 9250 x
0.1 MHz, which
equals to 925 MHz. NO NO Yes None
Indicates the
maximum downlink
frequency
supported by the
RRU or RFU band
2.This parameter is
NULL,when the
RRU does not
supported many
bands. For
example, if this
parameter is set to
9850, the maximum
downlink frequency
of the RRU is 9850
x 0.1 MHz, which
equals to 985 MHz. NO NO Yes None
Indicates the
bandwidth
supported by each
TX channel band 2
in the uplink. This
bandwidth is an
instantaneous
bandwidth. This
parameter is NULL,
when the RRU
does not supported
multi-bands. NO NO Yes None
Indicates the
cabinet number of
the RRU or RFU
where the TX
channel of the RRU
Indicates the
subrack number of
the RRU or RFU
where the TX
channel of the RRU
Indicates the slot
number of the RRU
or RFU where the
TX channel of the
RRU or RFU is
Indicates the
number of the TX
channel of the RRU
or RFU.0
corresponds to
R0A, 1 corresponds
can be deduced by
analogy. YES YES No None
switch of the TX
channel of the RRU
or RFU. This switch
is used to open or
close the TX
channel. The logical
switch of the TX
channel and the
ARFCNs(absolute
radio frequency
channel numbers)
on the TX channel
determine the state
of the physical
switch of the TX
channel: When this
switch is ON and
the TX channel is
configured with
ARFCNs(absolute
radio frequency
channel numbers),
the physical switch
is ON. In other
cases, the physical
switch is OFF. NO NO No None
Indicates the
current VSWR of
the TX channel.
When the TX power
is relatively low , the
S/N of the reflected
signal passing
through the
detector channel is
relatively low, which
leads to the
inaccuracy of the
VSWR calculation,
the value of this
field will be
displayed as NULL. NO NO Yes None
physical status of
the TX channel of
the RRU or RFU.
The logical switch
of the TX channel
and the ARFCN on
the TX channel
determine the state
of the physical
switch of the TX
channel: If the
logical switch of a
TX channel is ON
and the ARFCN is
configured for the
TX channel, the
physical switch of
the TX channel is
ON. In other cases,
the physical switch
is OFF. NO NO Yes None
Indicates the
maximum output
power supported by
the TX channel
hardware after the
maximum output
power locking is
enabled for this TX
channel. When the
maximum output
power locking is
disabled for this TX
channel, the value
the same as that of
the Hardware
Maximum Output
Power of the TX
Channel parameter.
This parameter
value can be 0.5 dB
higher or lower than
the actual maximum
output power. NO NO Yes None
Indicates the
maximum output
power of the RRU
or RFU TX unit
(single carrier). NO NO Yes None
Indicates the
maximum output
power of the RRU
or RFU TX unit
(multiple carriers). NO NO Yes None
Indicates the
maximum output
power supported by
the TX channel
hardware. This
parameter value
can have a 0.5 dB
difference from the
actual maximum
output power. NO NO Yes None
Indicates the
minimum downlink
frequency
supported by the
RRU or RFU band
1. For example, this
parameter is set to
9650, the minimum
downlink frequency
of the RRU or RFU
is 9650 x 0.1 MHz,
which equals to 965
MHz. NO NO Yes None
Indicates the
maximum downlink
frequency
supported by the
RRU or RFU band
1. For example, if
this parameter is
set to 9850, the
maximum downlink
frequency of the
RRU is 9850 x 0.1
MHz, which equals
Indicates the
bandwidth
supported by each
TX channel band 1
in the downlink.
This bandwidth is
an instantaneous
bandwidth. NO NO Yes None
Indicates the
minimum downlink
frequency
supported by the
RRU or RFU band
2. This parameter is
NULL,when the
RRU or RFU does
not supported many
bands.For example,
this parameter is
set to 9650, the
minimum downlink
frequency of the
RRU is 9650 x 0.1
MHz, which equals
Indicates the
maximum downlink
frequency
supported by the
RRU or RFU band
NULL,when the
RRU or RFU does
not supported many
bands.For example,
if this parameter is
set to 9850, the
maximum downlink
frequency of the
RRU is 9850 x 0.1
MHz, which equals
Indicates the
bandwidth
supported by each
TX channel band 2
in the downlink.
This bandwidth is
an instantaneous
bandwidth. This
parameter is NULL,
when the RRU or
RFU does not
supported multi-
bands. NO NO Yes None
Indicates the IPv4

address of the NTP
server. YES NO No None
synchronization is
turned on
automatically.The
time of a base
station may have
differences with the
standard time, and
a large difference
affects the accuracy
of KPIs. Therefore,
a period must be
configured for the
base station to
perform time
synchronization
with the NTP server
periodically to
ensure the accurate
time.
The period for
periodic NTP time
synchronization
must be configured
based on the NTP
server performance,
transport network
quality, and base
station quantity.
A smaller period for
periodic NTP time
synchronization
leads to higher
loads for the NTP
server and
transport network. A
larger period leads
to lower loads. NO YES No None
Indicates the port

number of the NTP
server. An NTP
client performs time
calibration with the
NTP server through
the port specified
by this parameter. NO NO No None
Indicates the mode

of the IP address of
the NTP server. YES NO No None
Indicates the IPv6

address of the NTP
Indicates the
encryption mode. If
this parameter is
set to PLAIN, data
is transmitted in
plaintext. NO NO No None
parity check. The
key used in the
DES_N algorithm is
similar to the key
used in the DES_S
algorithm. The only
difference is that in
the key used in the
DES_N algorithm,
the most significant
bit is used for parity
check of each byte.
The key used in the
DES_A algorithm is
an ASCII string of
one to eight
characters. The
seven least
significant digits of
the ASCII value
corresponding to
each character are
used to construct
56-bit key data. For
any ASCII string of
less than eight
characters, 0s are
appended to the
string to ensure that
the key data is
composed of 56
bits. The key used
in the MD5
algorithm is an
encrypted ASCII
string of one to
eight characters. NO YES No None
Indicates the
server-side index of
the NTP
authentication key.
The index must be
the same as the
setting on the
server. NO YES No None
Indicates an NTP
server is an active
or standby server.
Users can run the
SET
MASTERNTPS
command to set an
NTP server as a
master NTP server. NO NO No None
Indicates the time
zone of the NE. NO NO No None
Indicates whether
DST is enabled. NO NO No None
Indicates the mode
in which the DST
start date is
specified. There are
three formats:
date format, for
example, April 1st;
week format, for
example, the first
Sunday in April;
date and week
format, for example,
April 1st and
Sunday. If it is
Sunday on April 1st,
April 1st is the date.
Otherwise, the first
Sunday after April
1st is the date. NO NO No None
Indicates the month

in which the NE
DST starts. NO NO No None
Indicates the day
on which the NE
Indicates in which
week the NE DST
starts. NO NO No None
Indicates the week

in which the NE
Indicates the time

when the NE DST
starts. The value of
this parameter
observes the
standard time. NO NO No None
Indicates the end
date mode of the
NE DST. There are
three formats:
date format, for
example, April 1st;
week format, for
example, the first
Sunday in April;
date and week
format, for example,
April 1st and
Sunday. If it is
Sunday on April 1st,
April 1st is the date.
Otherwise, the first
Sunday after April
1st is the date. NO NO No None
Indicates the month

in which the NE
DST ends. NO NO No None
Indicates the day
on which the NE
Indicates the week

in which DST ends. NO NO No None
Indicates the week

in which the NE
Indicates the time
when the DST of
the NE ends. The
value of this
parameter observes
DST. NO NO No None
Indicates the DST
time offset of the
NE. This parameter
can be set to a
negative value. A
negative value
indicates that the
NE time is earlier
than the DST time,
and a positive value
indicates that the
NE time is later
than the DST time. NO NO No None
Indicates the offset
of time zone. This
parameter can be
set to a negative
value. NO NO No None
Indicates the date

to be set for the NE.
The format is as
follows: YYYY-MM-
DD. For example,
2006-09-08
indicates
September 8th of
2006. NO NO Yes None
Indicates the time

to be set for the NE.
The format is as
follows: HH:MM:SS.
For example,
10:20:05. NO NO Yes None
Indicates the
current date and
time of the NE. The
query result is the
local time of the
NE, including the
year, month, day,
hour, minute,
second, and time
zone. If the DST of
the NE is effective,
the query result
contains a DST flag
(the flag used to
indicate whether
the DST is applied).
The format is as
follows: YYYY-MM-
DD HH:MM:SS. NO NO Yes None
Indicates the
external reference
time source of the
NE. NO NO No None
Indicates the date

and time of the last
successfully-
synchronized time
of the NE. The
format is as follows:
YYYY-MM-DD
HH:MM:SS. NO NO Yes None
Indicates the
transmission
encryption mode of
the FTP client. If
this parameter is
set to Auto, the FTP
client first attempts
to transmit data in
ciphertext. If the
attempt fails, the
FTP client
automatically
switches the
encryption mode to
retransmit data in
plaintext. However,
if there are faults in
transmission
equipment such as
the SeGW, the FTP
client does not
attempt to
retransmit data in
plaintext even if the
FTP server
supports encrypted
transmission. In this
case, the FTP
connection setup
fails. NO NO No LBFD-004003
Indicates whether
FTP connections in
encrypted mode
can be established
when there is a
state firewall. In
plaintext mode, this
parameter is invalid.
In encrypted mode,
set to Yes, the FTP
client sends a
command to switch
the transmission
mode of the control
connection channel
to plaintext. In this
way, the state
firewall can identify
and dynamically
open the port
required for FTP
transmission; if this
parameter is set to
No, the FTP
connection may fail
to be set up due to
port restrictions
imposed by the
state firewall. If
security
requirements are
met, it is
recommended that
this parameter be
set to Yes. NO NO No LBFD-004003
Indicates whether
the certificate
authentication
mode is supported
when encrypted
data is being
transmitted. NO NO No LBFD-004003
Indicates the IP
address of the FTP
Indicates the port of
the FTP server.If no
port is added to an
IP address using
the ADD
FTPSCLTDPORT
command, port 21
is used for the IP
address by default.
If a port is added to
an IP address using
the ADD
FTPSCLTDPORT
command, the
default port 21 is no
longer valid for the
IP address. NO NO No None
Indicates the index

of the operator. YES YES No LBFD-002032
Indicates the
extended QoS
Class Identifier
(QCI), which is
required by the
operator for user
differentiation. YES YES No LBFD-002032

the service-based TDLOFD-001043
inter-RAT handover LOFD-001046 /
policy group. NO NO No TDLOFD-001046
Indicates the ID of
the service-based
inter-frequency
handover policy
group. NO NO No LBFD-00201805
Indicates the ID of
the operator. YES YES No None
Indicates the
priorities of E-
UTRAN TDD and
E-UTRAN FDD. To
prioritize E-UTRAN
TDD and E-UTRAN
FDD, set this
parameter to
EUTRAN_TDD or
EUTRAN_FDD. To
treat E-UTRAN
TDD and E-UTRAN
FDD equally, set
this parameter to LBFD-00201802 /
EUTRAN. NO NO No TDLBFD-00201802
Indicates the
priorities of E-
UTRAN TDD and
E-UTRAN FDD. To
prioritize E-UTRAN
TDD and E-UTRAN
FDD, set this
parameter to
EUTRAN_TDD or
EUTRAN_FDD. If
FirstRatPri is set to
EUTRAN, set
SecondRatPri to
NULL, indicating
that E-UTRAN TDD
and E-UTRAN FDD LBFD-00201802 /
are not prioritized. NO NO No TDLBFD-00201802
Offset and the
RSRP threshold for
inter-frequency
measurement event
A2. If both
TddIfHoA2ThdRsrp
Offset and
FddIfHoA2ThdRsrp
Offset are set to
-100, LTE TDD
measurement and
LTE FDD
measurement are
not prioritized, and
the RSRP threshold
delivered by the
eNodeB is the
RSRP threshold for
inter-frequency
measurement event
A2.
If only
TddIfHoA2ThdRsrp
Offset is set to -100,
LTE TDD
measurement is not
performed and the
RSRP threshold
delivered by the
eNodeB is the sum
of the value of
FddIfHoA2ThdRsrp
Offset and the
RSRP threshold for
inter-frequency
measurement event
A2. NO NO No TDLBFD-00201802
Offset and the
RSRP threshold for
inter-frequency
measurement event
A2. If both
TddIfHoA2ThdRsrp
Offset and
FddIfHoA2ThdRsrp
Offset are set to
-100, LTE TDD
measurement and
LTE FDD
measurement are
the RSRP threshold
delivered by the
eNodeB is the
RSRP threshold for
inter-frequency
measurement event
A2.
If only
FddIfHoA2ThdRsrp
Offset is set to -100,
LTE FDD
measurement is not
performed and the
RSRP threshold
delivered by the
eNodeB is the sum
of the value of
TddIfHoA2ThdRsrp
Offset and the
RSRP threshold for
inter-frequency
measurement event LBFD-00201802 /
A2. NO NO No TDLBFD-00201802
eNodeB is the sum
of the value of this
parameter and the
RSRP threshold for
inter-RAT
measurement event
A2. If both
UtranA2ThdRsrpOff
set and
GeranA2ThdRsrpOf
fset are set to -100,
UTRAN
measurement and
GERAN
measurement are
the RSRP threshold
delivered by the
eNodeB is the
RSRP threshold for
inter-RAT
measurement event
A2. If only
UtranA2ThdRsrpOff
set is set to -100,
UTRAN
measurement is not
performed and the
RSRP threshold
delivered by the
eNodeB is the sum
of the value of
GeranA2ThdRsrpOf
fset and the RSRP
threshold for inter-
RAT measurement LOFD-001019 /
event A2. NO NO No TDLOFD-001019
eNodeB is the sum
of the value of this
parameter and the
RSRP threshold for
inter-RAT
measurement event
A2. If both
UtranA2ThdRsrpOff
set and
GeranA2ThdRsrpOf
fset are set to -100,
UTRAN
measurement and
GERAN
measurement are
the RSRP threshold
delivered by the
eNodeB is the
RSRP threshold for
inter-RAT
measurement event
A2. If only
GeranA2ThdRsrpOf
fset is set to -100,
GERAN
measurement is not
performed and the
RSRP threshold
delivered by the
eNodeB is the sum
of the value of
UtranA2ThdRsrpOff
set and the RSRP
RAT measurement LOFD-001020 /

the operator. YES YES No TDLOFD-001133
LOFD-001032 /
dedicated SPID for LOFD-001044 /
an TDLOFD-001044
operator.Operators LOFD-001045 /
can define the TDLOFD-001045
RatFreqPriorityGrou LOFD-001054 /
pId MO TDLOFD-001054
corresponding to LOFD-00105401 /
the dedicated SPID. TDLOFD-00105401
Each operator can LOFD-001059 /
be configured with TDLOFD-001059
a maximum of 256 LOFD-001133 /
dedicated SPIDs. YES YES No TDLOFD-001133
Indicates whether
to set a RAT or
frequency priority. If
this parameter is
set to CFG(CFG),
UEs preferentially
camp on the RAT or
frequency. If this
NOT_CFG(NOT_C TDLOFD-001032
FG), UEs do not LOFD-001044 /
preferentially camp TDLOFD-001044
on the RAT or LOFD-001045 /
frequency. NO NO No TDLOFD-001045
LOFD-001032 /
TDLOFD-001032
LOFD-001044 /
TDLOFD-001044
LOFD-001045 /
TDLOFD-001045
LOFD-001054 /
TDLOFD-001054
LOFD-00105401 /
TDLOFD-00105401
LOFD-001059 /
Indicates the ID of a TDLOFD-001059
RAT/frequency LOFD-001133 /
priority group. NO NO No TDLOFD-001133
Indicates the index

of the operator. YES YES No None
Indicates the QoS
Class Identifier
(QCI) of an EPS
bearer. Different
QCIs represent
different QoS
specifications such
as the packet delay
budget, packet
error loss rate, and
resource type
(whether the
service is a GBR
service or not). For
details, see Table
6.1.7 in 3GPP TS
23.203. YES YES No None

policy group. NO NO No TDLOFD-001046
Indicates the ID of
the service-based
inter-frequency
handover policy
group. NO NO No LBFD-00201805
LOFD-001033 /
TDLOFD-001033
LOFD-001034 /
TDLOFD-001034
TDLOFD-001052
TDLOFD-001053
Indicates the index TDLOFD-001035
of the operator. YES YES No TDLOFD-001090
LOFD-001033 /
TDLOFD-001033
LOFD-001034 /
TDLOFD-001034
LOFD-001035 /
TDLOFD-001035
highest-priority RAT TDLOFD-001019
for handovers. It is LOFD-001020 /
UTRAN by default. TDLOFD-001020
If this parameter is LOFD-001021
set to UTRAN, TDLOFD-001052
GERAN, or TDLOFD-001053
CDMA2000, the TDLOFD-001090
is UTRAN, GERAN, TDLOFD-001072
or CDMA2000, TDLOFD-001046
Indicates the
medium-priority
RAT for handovers.
It is GERAN by LOFD-001033 /
default. If this TDLOFD-001033
UTRAN, GERAN, TDLOFD-001034
or CDMA2000, the LOFD-001035 /
medium-priority TDLOFD-001035
RAT is UTRAN, LOFD-001019 /
GERAN, or TDLOFD-001019
CDMA2000, LOFD-001020 /
respectively. If this TDLOFD-001020
parameter is set to LOFD-001021
NULL, no medium- TDLOFD-001052
priority RAT is TDLOFD-001053
specified and only TDLOFD-001090
the highest-priority TDLOFD-001043
RAT can be TDLOFD-001072
selected for TDLOFD-001046
handovers. NO NO No TDLOFD-001073
Indicates the
lowest-priority RAT
for handovers. It is
CDMA2000 by LOFD-001033 /
default. If this TDLOFD-001033
lowest-priority RAT TDLOFD-001035
is UTRAN, GERAN, LOFD-001019 /
respectively. If this LOFD-001020 /
parameter is set to TDLOFD-001020
NULL, no lowest- LOFD-001021
priority RAT is TDLOFD-001052
the highest- or TDLOFD-001090
medium-priority TDLOFD-001043
selected for TDLOFD-001046
Indicates the LCS

capability of the
UTRAN. If this
parameter is set to
ON, the UTRAN
supports LCS. If
this parameter is
set to OFF, the
UTRAN does not LOFD-001033 /
support LCS. NO NO No TDLOFD-001033
Indicates the LCS

capability of the
GERAN. If this
parameter is set to
ON, the GERAN
supports LCS. If
this parameter is
set to OFF, the
GERAN does not LOFD-001034 /
support LCS. NO NO No TDLOFD-001034
Indicates the LCS
capability of the
CDMA2000. If this
parameter is set to
ON, the CDMA2000
supports LCS. If
this parameter is
set to OFF, the
CDMA2000 does LOFD-001035 /
not support LCS. NO NO No TDLOFD-001035
Indicates the
highest-priority RAT
for CSFB initiated
by a UE in idle
mode. It is UTRAN
by default. If this
is UTRAN, GERAN, LOFD-001089 /
Indicates the
medium-priority
RAT for CSFB
initiated by a UE in
idle mode. It is
GERAN by default.
set to UTRAN,
GERAN, or
CDMA2000, the
medium-priority
RAT is UTRAN,
GERAN, or
CDMA2000,
parameter is set to
NULL, no medium-
priority RAT is LOFD-001035 /
the highest-priority LOFD-001088 /
selected for CSFB LOFD-001089 /
initiated by a UE in TDLOFD-001089
idle mode. NO NO No TDLOFD-001090
Indicates the
lowest-priority RAT
for CSFB initiated
by a UE in idle
mode. It is
CDMA2000 by
default. If this
parameter is set to
UTRAN, GERAN,
or CDMA2000, the
lowest-priority RAT
is UTRAN, GERAN,
or CDMA2000,
parameter is set to
NULL, no lowest-
priority RAT is
specified and only LOFD-001035 /
the highest- or TDLOFD-001035
medium-priority LOFD-001088 /
selected for CSFB LOFD-001089 /
initiated by a UE in TDLOFD-001089
idle mode. NO NO No TDLOFD-001090
Indicates the CSFB

policy for a UE in
connected mode. If
the CSFB steering LOFD-001033 /
function is disabled, TDLOFD-001033
this parameter also LOFD-001034 /
applies to UEs in TDLOFD-001034
idle mode. The LOFD-001088 /
policy can be PS TDLOFD-001088
handover, CCO, or LOFD-001089 /
redirection. NO NO No TDLOFD-001089
Indicates the CSFB

policy for a UE in
idle mode. The LOFD-001088 /
policy can be PS TDLOFD-001088
handover, CCO, or LOFD-001089 /
Indicates the index

of the operator. YES YES No None
LBFD-00201801 /
TDLBFD-00201801
LBFD-00201802 /
TDLBFD-00201802
LBFD-00201804 /
TDLBFD-00201804
LBFD-00201805 /
TDLBFD-00201805
LOFD-001019 /
TDLOFD-001019
Indicates the mobile LOFD-001020 /
country code of the TDLOFD-001020
target PLMN. YES YES No TDLOFD-001033
LBFD-00201801 /
TDLBFD-00201801
LBFD-00201802 /
TDLBFD-00201802
LBFD-00201804 /
TDLBFD-00201804
LBFD-00201805 /
TDLBFD-00201805
LOFD-001019 /
TDLOFD-001019
Indicates the mobile LOFD-001020 /
network code of the TDLOFD-001020
target PLMN. YES YES No TDLOFD-001033
Indicates the ID of
the RAT/frequency LOFD-00105401 /
priority group. YES YES No TDLOFD-00105401
LOFD-00105401 /
TDLOFD-00105401
Indicates the Radio TDLOFD-001090
Access Technology LOFD-001021 /
(RAT). YES YES No TDLOFD-001021
Indicates the
downlink frequency.
In CDMA2000, this
parameter indicates
the bandclass.
Before configuring
a priority for a
frequency specified
by this parameter,
ensure that an
external or local cell
operating on this
frequency has been LOFD-00105401 /
Indicates the
priority of the intra-
RAT frequency
band or frequency.
The value 0
indicates the lowest LOFD-00105401 /
priority. NO NO No TDLOFD-00105401
Indicates the
GERAN frequency LOFD-00105401 /
band. NO NO No TDLOFD-00105401
Indicates the ID of
the operator. YES YES No LBFD-00201805
Indicates the ID of
the service-based
inter-frequency
handover policy LBFD-00201805 /
group. YES YES No TDLBFD-00201805
Indicates whether
UEs of an operator
in this policy group
can be handed over
to a specified
frequency during
service-based inter-
frequency LBFD-00201805 /
handovers. NO NO No TDLBFD-00201805
Indicates the
frequency to which
a service with a
specified QCI is
preferentially LBFD-00201805 /
handed over. NO NO No TDLBFD-00201805
LOFD-001043 /
TDLOFD-001043

policy group. YES YES No TDLOFD-001046
Indicates whether
service-based inter-
RAT handovers are LOFD-001043 /
required, allowed, TDLOFD-001043
or not allowed for a LOFD-001046 /
QCI. NO NO No TDLOFD-001046
LOFD-00105401 /
subscriber profile ID LOFD-001059 /
(SPID). YES YES No TDLOFD-001059
Indicates whether
to use normal or
special DRX. If this
parameter is set to
TRUE, ordinary
DRX parameters
are applied to UEs
with the SPID. If
this parameter is
set to FALSE,
special DRX
parameters are
applied to UEs with LBFD-002017 /
the SPID. NO NO No TDLBFD-002017
Indicates whether
to set the priority for
the intra-RAT
frequency group. If
this parameter is
set to CFG(CFG),
UEs select the
target frequency
based on the
priority setting. If
this parameter is
set to
NOT_CFG(NOT_C
FG), UEs do not
select the target
frequency based on LOFD-00105401 /
the priority setting. NO NO No TDLOFD-00105401
Indicates the ID of
the intra-RAT
frequency priority LOFD-00105401 /
group. NO NO No TDLOFD-00105401
Indicates whether
to support
preallocation. If this
parameter is set to
TRUE and
PreAllocationSwitch
under the
UlSchSwitch
parameter in the
CellAlgoSwitch MO
is set to On,
resources can be
preallocated to
UEs. Otherwise,
resources are not
preallocated to LOFD-001059 /
UEs. NO NO No TDLOFD-001059
Indicates whether
to enable or disable
inter-frequency load
balancing for the
SPID. The values
TRUE or FALSE
indicate that inter-
frequency load
balancing is
allowed or LOFD-00105401 /
prohibited for UEs TDLOFD-00105401
with the SPID, LOFD-001032 /
Indicates whether
inter-RAT load
sharing for the
SPID. The values
TRUE or FALSE
indicate that inter- LOFD-00105401 /
RAT load sharing is TDLOFD-00105401
allowed or LOFD-001044 /
prohibited for UEs TDLOFD-001044
with the SPID, LOFD-001045 /
Indicates whether
to allow SPID-
based handovers
back to the home
public land mobile
network (HPLMN).
set to
TRUE(TRUE), a
roaming UE can be
handed over to the
HPLMN network
when it moves back
to the coverage of
the HPLMN network
based on the SPID.
set to
FALSE(FALSE),
this UE cannot be
handed over to the
HPLMN network LOFD-00105401 /
based on the SPID. NO NO No TDLOFD-00105401
Indicates the ID of
Indicates the QoS
class identifier
(QCI) of an evolved
packet system
(EPS) bearer.
Different QCIs
indicate different
QoS requirements,
such as the packet
delay budget,
packet error loss
rate, and resource
type. For details,
see Table 6.1.7 in
3GPP TS 23.203. YES YES No None
Indicates reserved
32-bit switch
parameter 0 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
32-bit switch
parameter 1 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
32-bit switch
parameter 2 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 2 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 3 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 4 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 5 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 6 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 7 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 8 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 9 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 10 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates the name

of an eNodeB
function, which
uniquely identifies
the eNodeB
function. YES YES No None
Indicates the ID of
the application
referenced by an
eNodeB function.
The application
provides an
operating
environment for the
eNodeB function. NO NO No None
Indicates the
eNodeB ID defined
in the service
protocol interface,
which uniquely
identifies an
eNodeB within a
PLMN. For details,
see 3GPP TS
36.300. NO NO No None
Indicates user-
defined remarks. NO NO No None
Indicates model
definition version of
eNodeB resources,
including the
management object
(MO) definition,
attribute definition,
and configuration
rules. NO NO No None
of the counter
check timer. When
the timer expires, a
counter check
procedure is
initiated. After the
procedure is
complete, the timer
is restarted. A
length of 0 indicates
that the timer is
invalid. In this case,
the eNodeB cannot
initiate periodic
counter check LBFD-002004 /
procedures. NO NO No TDLBFD-002004
Indicates the
COUNT value for
initiating counter
check procedures.
When the COUNT
value (used at the
PDCP layer) of any
DRB for a UE is a
multiple of the value
of this parameter,
the eNodeB
initiates a counter
check procedure.
The value 0
indicates that the
eNodeB does not
initiate a counter
check procedure
based on the LBFD-002004 /
COUNT value. NO NO No TDLBFD-002004
Indicates whether
to release a DRB
when the counter
check detects an
unexpected result LBFD-002004 /
in the DRB. NO NO No TDLBFD-002004
Indicates the
highest-priority
ciphering algorithm LOFD-00101001 /
supported by the TDLOFD-00101001
eNodeB. The value LOFD-00101002 /
NULL indicates that TDLOFD-00101002
ciphering is not LOFD-00101003 /
applied. NO NO No TDLOFD-00101003
Indicates the
second-priority
ciphering algorithm LOFD-00101001 /
supported by the TDLOFD-00101001
eNodeB. The value LOFD-00101002 /
NULL indicates that TDLOFD-00101002
Indicates the third-

priority ciphering
algorithm supported LOFD-00101001 /
by the eNodeB. The TDLOFD-00101001
value NULL LOFD-00101002 /
indicates that TDLOFD-00101002
Indicates the fourth-
priority ciphering
algorithm supported LOFD-00101001 /
by the eNodeB. The TDLOFD-00101001
value NULL LOFD-00101002 /
indicates that TDLOFD-00101002
Indicates the timer

governing the
period the eNodeB
will wait for a
response message
from the MME. NO NO No None
Indicates the timer
governing the
period the eNodeB
will wait for a
response message
from the
neighboring
eNodeB. NO NO No None
Indicates the timer
governing the
period the eNodeB
will wait for a
response message
from a UE. NO NO No None
Indicates the timer

for the eNodeB to
wait for a handover
preparation
completion
message when a
UE is handed over
to a CDMA2000
1xRTT cell. The
eNodeB starts the
timer after sending
a Handover From
EUTRA Preparation
Request message
to the UE and stops
the timer after
receiving a UL
Handover
Preparation
Transfer message LOFD-001090 /
from the UE. NO NO No TDLOFD-001090
Indicates the timer
for the eNodeB to
wait for a Downlink
S1 CDMA2000
Tunneling message
when a UE is
handed over to a
CDMA2000 1xRTT
cell. The eNodeB
starts the timer after
sending an UPLINK
S1 CDMA2000
TUNNELING
message to the
MME and stops the
timer after receiving
a Downlink S1
CDMA2000
Tunneling message
containing
CDMA2000 HO LOFD-001090 /
Status. NO NO No TDLOFD-001090
Indicates the timer

for the eNodeB to
release resources
for a UE after the
UE is handed over
to a CDMA2000
1xRTT cell. The
eNodeB starts the
timer after sending
a
MobilityFromEUTR
ACommand LOFD-001090 /
message. NO NO No TDLOFD-001090
Indicates the timer

for the eNodeB to
release resources
for a UE after the
UE is handed over
to a CDMA2000
HRPD cell. The
eNodeB starts the
timer after sending
a
MobilityFromEUTR
ACommand LOFD-001021 /
message. NO NO No TDLOFD-001021
Indicates the timer
for the eNodeB to
wait for a Downlink
S1 CDMA2000
Tunneling message
when a UE is
handed over to a
CDMA2000 HRPD
cell. The eNodeB
starts the timer after
sending an UPLINK
S1 CDMA2000
TUNNELING
message to the
MME and stops the
timer after receiving
a Downlink S1
CDMA2000
Tunneling message
containing
CDMA2000 HO LOFD-001021 /
Status. NO NO No TDLOFD-001021
Indicates the timer

for the eNodeB to
wait for a handover
preparation
completion
message when a
UE is handed over
to a CDMA2000
HRPD cell. The
eNodeB starts the
timer after sending
a Handover From
EUTRA Preparation
Request message
to the UE and stops
the timer after
receiving a UL
Handover
Preparation
Transfer message LOFD-001021 /
from the UE. NO NO No TDLOFD-001021
Indicates the timer
for the eNodeB to
wait for a RRC
Connection Setup
Complete. NO NO No None
Indicates the timer

for the eNodeB to
wait for a Security
Mode Complete
message. NO NO No None
Indicates the timer
for the eNodeB to
wait for an
unprotected UE
Capability
Information
message. NO NO No None
Indicates the timer

for the eNodeB to
wait for the first
forwarded packet. NO NO No None
Indicates the timer
for the eNodeB to
wait for the
endmarker packet. NO NO No None
Indicates the
highest-priority
integrity protection
algorithm supported LBFD-002004 /
by the eNodeB. NO NO No TDLBFD-002004
Indicates the
second-priority
integrity protection
algorithm supported LBFD-002004 /
by the eNodeB. NO NO No TDLBFD-002004
Indicates the third-

priority integrity
protection algorithm
supported by the LBFD-002004 /
eNodeB. NO NO No TDLBFD-002004
Indicates whether
the eNodeB can
use the null
algorithm for
If this switch is
turned off, the null
algorithm cannot be
used for integrity
protection. When
this switch is turned
off, the eNodeB
selects an integrity
protection algorithm
based on the
algorithm priorities
specified by
PrimaryIntegrityAlg
o,
SecondIntegrityAlg
o, and
ThirdIntegrityAlgo,
but skips the null LBFD-002004 /
algorithm. NO NO No TDLBFD-002004
Indicates whether
to enable ROHC.
Set this parameter
to ON if the
eNodeB is
expected to support
VoIP or video LOFD-001017 /
Bidirectional
Reliable Mode (R-
Mode), but its
feedback-induced
overhead is
minimum compared
with the overhead
in O-Mode and R-
Mode. In O-Mode,
the decompressor
can send feedback
messages to the
compressor to
indicate
decompression
failures or
successful context
updates. O-Mode is
more reliable than
U-Mode and
requires a smaller
amount of feedback
than R-Mode. In R-
Mode, the reliability
of context
synchronization
between the
compressor and the
decompressor is
higher than that in
any other mode.
However, because
of frequent
feedback, R-Mode
causes the largest
amount of link LOFD-001017 /
overhead. NO NO No TDLOFD-001017
framework, header
compression
algorithms vary with
protocols. Profiles
define the header
compression
protocols (such as
RTP/UDP/IP or
TCP/IP), which are
under the same
ROHC framework,
for specific types of
packet streams.
Each profile has a
unique identifier.
As defined by LTE
specifications, the
eNodeB supports
the following
profiles: profile
0x0001 (usage:
RTP/UDP/IP;
reference: RFC
3095 and RFC
4815), profile
0x0002 (usage:
UDP/IP; reference:
RFC 3095 and RFC
4815), profile
0x0003 (usage:
ESP/IP; reference:
RFC 3095 and RFC
4815), and profile
0x0004 (usage: IP;
reference: RFC
3843 and RFC LOFD-001017 /
4815). NO NO No TDLOFD-001017

of the timer T302.
T302 specifies the
wait duration for
retransmitting an
RRCConnectionRe
quest message
after the previous
request is rejected.
This timer is started
when the UE
receives an
RRCConnectionRej
ect message and
stopped when the
UE enters the
RRC_CONNECTE
D mode or performs LBFD-002007 /
cell reselection. NO NO No TDLBFD-002007
of timer T320 for
load balancing.
T320 specifies the
time period during
which the dedicated
priorities (used for
cell reselection)
retain valid. The
time period is
contained in the
RRCConnectionRel
ease message that
is received by the
UE. After T320
expires, the
dedicated priorities
become invalid.
when the UE
receives an
RRCConnectionRel
ease message
containing the t320
IE.
This timer is
stopped when the
UE enters the
RRC_CONNECTE
D mode. NO NO No None

of timer T304 for
intra-RAT handover.
If the UE does not
complete the
handover before
this timer expires,
the UE reverts back
to the associated
configuration and
initiates an RRC
connection
reestablishment
procedure. NO NO No None
of timer T304 for
inter-RAT handover
to GERAN. If the
UE does not
complete the
handover before
this timer expires,
the UE reverts back
to the associated
configuration and
initiates an RRC
connection re-
establishment
procedure. NO NO No None

of timer T320 to be
contained in
RRCConnectionRel
ease messages
sent for reasons
other than load
balancing. T320
specifies the time
period during which
the dedicated
priorities (used for
cell reselection) are
valid. After T320
expires, the
dedicated priorities
become invalid.
This parameter is
invalid for UEs to
be redirected based
on the subscriber
profile ID (SPID).
when the UE
receives an
RRCConnectionRel
ease message
containing the t320
IE. It is stopped
when the UE enters
the
RRC_CONNECTE
D mode. NO NO No None
of the UE inactivity
timer. If the eNodeB
detects that a UE
has neither
received nor sent
data for a duration
exceeding the value
of this parameter,
the eNodeB
releases the RRC
connection for the
UE. If this
parameter is set to
0, the UE inactivity
timer is not used. If
this parameter is
modified, the
modified value
applies only to UEs
that access the LBFD-002007 /
network later. NO NO No TDLBFD-002007
Indicates the timer

used to govern the
period in which the
eNodeB maintains
uplink
synchronization for
a UE. After this
timer expires, the
eNodeB does not
send Timing
Advance Command
to the UE. This
parameter does not
take effect if it is set
to 0. That is, the
eNodeB will
constantly send
Timing Advance
Command to the
UE to maintain
uplink
synchronization for LBFD-002007 /
the UE. NO NO No TDLBFD-002007
of the timer for the
eNodeB to filter
repeated RRC
Connection
Request messages.
The actually used
timer length is the
sum of T300 length
and the value of LBFD-002007 /
eNodeB detects
that a UE has
neither received nor
sent data for a
duration exceeding
the value of this
parameter, the
eNodeB releases
the RRC
connection for the
UE. A large value of
this parameter
reduces the amount
of signaling but
increase UE power
consumption.You
are advised to set
this parameter to a
value greater than
the value of
UlSynTimerDynDrx.
In power saving
mode, you are
advised to set this
parameter
significantly
different to the
value of the
UlSynTimerDynDrx
parameter, for
example a gap of
10 seconds, to
avoid power
consumption LOFD-00110501 /
increase due to the TDLOFD-00110501
increase of LOFD-00110502 /
signaling. NO NO No TDLOFD-00110502
Indicates the timer
used to govern the
period in which the
eNodeB maintains
uplink
synchronization for
a DRX UE when
dynamic DRX is
enabled. After this
timer expires, the
eNodeB does not
send Timing
Advance Command
to the UE. You are
advised to set this
parameter to a
value smaller than
the value of
UeInactivityTimerDy
nDrx.In power
saving mode, you
are advised to set
this parameter
significantly
different to the
value of the
UeInactivityTimerDy
nDrx parameter, for
example a gap of
10 seconds, to
avoid power
increase due to the TDLOFD-00110501
increase of LOFD-00110502 /
signaling. NO NO No TDLOFD-00110502
Indicates the ID of
the TCE for MDT. YES YES No None
Indicates the IP
address version.
IPv4~0 indicates
that the IP version
is IPv4. IPv6~1
indicates that the IP
version is IPv6. NO NO No None
Indicates the IPv4
address of the TCE. NO NO No None
Indicates the IPv6

address of the TCE. NO NO No None
Indicates the mobile

country code (MCC)
of an operator that
the target eNodeB LOFD-
supporting X2 self- 002004/TDLOFD-
setup belongs to. YES YES No 002004

network code
(MNC) of an
operator that the
target eNodeB
supporting X2 self-
setup belongs to.
The value of this
parameter is a
string of two or
three characters,
each of which must LOFD-
be a digit in the 002004/TDLOFD-
range of 0 to 9. YES YES No 002004
Indicates the local
identity of the cell. It
cell within an
eNodeB. YES YES No None
Indicates the
Reference Signal
Received Power
(RSRP) threshold
for reporting event
A2 in a secondary
cell. When the
RSRP of a UE is LAOFD-00100101
lower than this LAOFD-00100102
threshold, event A2 LAOFD-00100201
is reported. NO NO No LAOFD-00100202
Indicates the
Reference Signal
Received Power
(RSRP) threshold
for a UE to report
event A4 of a
secondary cell.
When the RSRP of
the UE is greater LAOFD-00100101
than the threshold, LAOFD-00100102
event A4 is LAOFD-00100201
reported. NO NO No LAOFD-00100202
Indicates the carrier

management
switch. If this switch
is turned on, a
secondary
component carrier
(SCC) is activated
and deactivated
volume, which
reduces the UE
power consumption
when a carrier
aggregation (CA)
UE performs no
service or a few
services. If this
switch is turned off,
the SCC is always
active after being
configured, a CA
UE can use the LAOFD-00100101
SCC immediately LAOFD-00100102
when the traffic LAOFD-00100201
volume is large. NO NO No LAOFD-00100202
Indicates the
threshold for a CA
UE to activate an
SCell. A CA UE can
active an SCell only
when its buffered LAOFD-00100101
data on the eNodeB LAOFD-00100102
exceeds this LAOFD-00100201
threshold. NO NO No LAOFD-00100202
Indicates the
threshold for a CA
UE to deactivate an
SCell. A CA UE can
deactivate an SCell
only when its
buffered data on LAOFD-00100101
the eNodeB is LAOFD-00100102
smaller than this LAOFD-00100201
threshold. NO NO No LAOFD-00100202
Indicates the
threshold for a CA
UE to activate an
SCell. A CA UE can
activate an SCell
only when its buffer LAOFD-00100101
delay on the LAOFD-00100102
eNodeB exceeds LAOFD-00100201
this threshold. NO NO No LAOFD-00100202
Indicates the
threshold for a CA
UE to deactivate an
SCell. A CA UE can
deactivate an SCell
only when its
throughput is LAOFD-00100101
smaller than the LAOFD-00100102
value of this LAOFD-00100201
parameter. NO NO No LAOFD-00100202
Indicates the local
cell within an

for reporting the
downlink CoMP
measurement
event. This offset is
the difference
between the signal
quality of a
neighboring cell
and that of the
serving cell. A larger
a neighboring cell
must have better
quality for reporting
the event. For TDLOFD-001136
details, see 3GPP TDLAOFD-003001
TS 36.331. NO NO No TDLAOFD-003002
Indicates the local

ID of the cell. It
cell within a BS. YES YES No None
for adjusting the PA
through power
control on the
PDSCH. If this
parameter is set to
ON, the PA is
adjusted
dynamically when
the channel quality
is extremely good LBFD-002016 /
or bad. NO NO No TDLBFD-002016
Indicates the PA to
be used when PA
adjustment for
PDSCH power
control is disabled,
DL ICIC is disabled,
and the even power
distribution is used LBFD-002016 /
for the PDSCH. NO NO No TDLBFD-002016
Indicates the local
ID of the cell. It
intervals (TTIs) with
data transmission
to the total TTIs. If
the measurement
result of UE traffic is
equal to or lower
than this threshold,
the eNodeB
determines that the
UE should remain
in DRX mode or the
UE should be
triggered to enter
DRX mode. If both
the values of the
FddExitDrxThd and
FddEnterDrxThd
parameters are
small and close to
each other, the UE
frequently enters
and exits the DRX
mode. When both
the
FddEnterDrxThd
parameter and the
FddExitDrxThd
parameter are set
to 1000 and DRX is
enabled, the
eNodeB directly
determines that the
UE should enter or
exit the DRX mode,
but not according to
the measurement
result of UE traffic. NO NO No LBFD-002017
DRX mode. If the
value of the
FddExitDrxThd
parameter is set to
1000 and the value
of the
FddEnterDrxThd
parameter is set to
a value smaller
than 1000, the UE
will not exit the DRX
mode once entering
the DRX mode. If
both the values of
the FddExitDrxThd
and
FddEnterDrxThd
parameters are
small and close to
each other, the UE
frequently enters
and exits the DRX
mode. When both
the
FddEnterDrxThd
parameter and the
FddExitDrxThd
parameter are set
to 1000 and DRX is
enabled, the
eNodeB directly
determines that the
UE should enter or
exit the DRX mode,
but not according to
the measurement
result of UE traffic. NO NO No LBFD-002017
traffic volume
threshold for UEs to
enter DRX in the
cell that operates in
TDD mode. This
threshold is used in
the DRX algorithm.
It is expressed as a
proportion of the
transmission time
uplink data
transmission to the
total TTIs. If the
traffic volume at a
UE is equal to or
lower than this
threshold, the
eNodeB decides
that the UE should
retain its DRX state
or enter DRX. NO NO No TDLBFD-002017

traffic volume
exit DRX in the cell
that operates in
TDD mode. This
the DRX algorithm.
proportion of the
transmission time
uplink data
transmission to the
total TTIs. If the
traffic volume at a
UE is equal to or
higher than this
threshold, the
eNodeB decides
that the UE should
retain its non-DRX
state or exit DRX. NO NO No TDLBFD-002017
Indicates the
downlink traffic
volume threshold
for UEs to enter
DRX in the cell that
operates in TDD
mode. This
the DRX algorithm.
proportion of the
transmission time
downlink data
transmission to the
total TTIs. If the
traffic volume at a
UE is equal to or
lower than this
threshold, the
eNodeB decides
that the UE should
Indicates the
downlink traffic
volume threshold
for UEs to exit DRX
in the cell that
operates in TDD
mode. This
the DRX algorithm.
proportion of the
transmission time
downlink data
transmission to the
total TTIs. If the
traffic volume at a
UE is equal to or
higher than this
threshold, the
eNodeB decides
that the UE should
retain its non-DRX
of the UE traffic
measurement
period. The traffic
volume of a UE
during this period is
measured. Based
on the
measurement
result, the DRX
algorithm decides
whether the UE
should enter or exit LBFD-002017 /
DRX. NO NO No TDLBFD-002017
Indicates whether
DRX active-time
measurement is
supported in the
TDD mode. If this
parameter is set to
ON, DRX active-
time measurement
is supported in the
TDD mode. If this
parameter is set to
OFF, DRX active-
time measurement
is not supported in
the cell that
operates in TDD
mode. NO NO No TDLBFD-002017

of the UE DRX
power saving
measurement
period for cells that
operate in TDD
mode. The power
saving volume of a
UE during this
period is measured.
Based on the
measurement
result, the DRX
algorithm decides
whether the UE
should enter or exit
DRX. NO NO No TDLBFD-002017
Indicates the active-
time measurement
enter DRX in the
TDD mode. This
the DRX algorithm.
If the measurement
result of a UE is
lower than this
threshold, the
eNodeB decides
that the UE should
Indicates the active-

time measurement
exit DRX in the cell
that operates in
TDD mode. This
the DRX algorithm.
If the measurement
result of a UE is
higher than this
threshold, the
eNodeB decides
that the UE should
retain its non-DRX
of the long DRX
cycle for a UE in
the unsynchronized
state. Set this
parameter to a
value greater than
the value of
LongDrxCycle;
otherwise, the
power saving gain
of the DRX for
unsynchronized LOFD-001105
UEs decreases. NO NO No TDLBFD-002017
Indicates whether
the cqi-Mask IE can
be set. The cqi-
Mask IE is an
optional IE
introduced in 3GPP
Release 9. If the
cqi-Mask IE is set to
Setup, the UE can
send
CQI/PMI/RI/PTI
reports on PUCCH
only in the
onDuration period
of discontinuous
reception (DRX). If
the cqi-Mask IE is
not set, the UE can
send
CQI/PMI/RI/PTI
reports on PUCCH
in the active period LBFD-002017 /
of DRX. NO NO No TDLBFD-002017
Indicates the DRX

onduration timer for
UEs when the
eNodeB does not
maintain
synchronization for LOFD-00110502 /
Indicates the DRX
inactivity timer for
UEs when the
eNodeB does not
maintain
synchronization for LOFD-001105 /
Indicates the local
cell within an
Indicates the RSRP
threshold for events
A1 and A2 that are
used for inter-
frequency and inter-
RAT blind
handovers based
on coverage. If the
RSRP
measurement result
of the serving cell is
higher than the
threshold, an event LBFD-00201802 /
A1 is reported. If TDLBFD-00201802
the RSRP LOFD-001019 /
measurement result TDLOFD-001019
of the serving cell is LOFD-001020 /
lower than the TDLOFD-001020
threshold, an event LOFD-001021 /
A2 is reported. NO NO No TDLOFD-001021
Indicates the RSRQ
threshold for events
A1 and A2 that are
used for inter-
frequency and inter-
RAT blind
handovers based
on coverage. If the
RSRQ
measurement result
of the serving cell is
higher than the
threshold, an event LBFD-00201802 /
A1 is reported. If TDLBFD-00201802
the RSRQ LOFD-001019 /
measurement result TDLOFD-001019
of the serving cell is LOFD-001020 /
lower than the TDLOFD-001020
threshold, an event LOFD-001021 /
A2 is reported. NO NO No TDLOFD-001021
Indicates the local

cell within an
for UL CoMP event
A3. This offset is
the difference
between the quality
of a neighboring
cell and that of the
a neighboring cell
must have better
quality for the
reporting of the
event. For details,
see 3GPP TS LOFD-001066 /
36.331. NO NO No TDLOFD-001066
Indicates the local
ID of the cell. It
Indicates whether a
UE needs to adjust
the transmit power
based on the MCS.
The indication is
sent to the UE
through an RRC
message. The
indication is
denoted by a bit. Bit
0 indicates that
both Ks and TF
are equal to 0. Bit 1
indicates that Ks is
equal to 1.25 and
TF is calculated.
For details, see LBFD-002026 /
3GPP TS 36.213. NO NO No TDLBFD-002026
Indicates the power
offset of the
sounding reference
signal to the
PUSCH when
DeltaMcsEnabled is
set to LBFD-002026 /
UU_DISABLE. NO NO No TDLBFD-002026
Indicates the power

offset of the
sounding reference
signal to the
PUSCH when
DeltaMcsEnabled is
set to LBFD-002026 /
UU_ENABLE. NO NO No TDLBFD-002026
Indicates the alpha
filtering coefficient
used by the UE
during RSRP
measurement for
path loss LBFD-002026 /
estimation. NO NO No TDLBFD-002026
Indicates the local
cell within an
Indicates the
measurement
object type for
distance-based LOFD-001072 /
handovers. The TDLOFD-001072
measurement LOFD-001073 /
object type can be TDLOFD-001073
E-UTRAN, UTRAN, LBFD-00201804 /
or GERAN. NO NO No TDLBFD-00201804
Indicates the
threshold for
distance-based
handovers. If the
distance between a
UE and the cell
center is greater LBFD-00201804 /
than this threshold, TDLBFD-00201804
a distance-based LOFD-001072 /
handover is TDLOFD-001072
triggered for this LOFD-001073 /
UE. NO NO No TDLOFD-001073
Indicates the local

ID of the cell. It
Indicates the ID of
the DRX parameter LBFD-002017 /
Indicates whether
bearers to which
the parameter
group applies
support DRX. The
value ON indicates
that the bearers
support DRX. The
value OFF indicates
that the bearers do LBFD-002017 /
not support DRX. NO NO No TDLBFD-002017

of the On Duration
Timer. Because of
the impact of CQI
reporting intervals
and SRS
transmission
intervals, the actual
value of this
parameter assigned
to a UE may be
greater than the LBFD-002017 /
configured value. NO NO No TDLBFD-002017
of the DRX LBFD-002017 /
Inactivity Timer. NO NO No TDLBFD-002017
of the DRX
Retransmission LBFD-002017 /
Timer. NO NO No TDLBFD-002017
the LongDrxCycle
parameter be set to
a value smaller
than or equal to 320
ms. Otherwise, the
uplink time
alignment
performance of UEs
is affected. If the
TimingAdvCmdOpt
Switch parameter is
set to ON, it is
recommended that
the
TimeAlignmentTime
r parameter be set
to sf10240. A
smaller value of the
TimeAlignmentTime
r parameter, such
as sf5120,
increases the
probability that UEs
in DRX mode
become uplink
asynchronized. The
length of the long
DRX cycle must be
smaller than the
length of the PDCP
packet discarding
timer for the
corresponding QCI.
Otherwise, packet
loss occurs during a
ping operation or LBFD-002017 /
low-traffic service. NO NO No TDLBFD-002017
Indicates whether
short DRX cycles LBFD-002017 /
are enabled. NO NO No TDLBFD-002017
of the short DRX
cycle. According to
3GPP
specifications, the
length of a long
DRX cycle must be
an integer multiple
of that of a short
DRX cycle. In
addition, the actual
value of
LongDrxCycle
assigned to a UE
may be less than
the configured
value because of
the impact of the
SRS bandwidth and
TA period specified
by the
TimeAlignmentTime
r parameter.
Therefore, the
actual value of
ShortDrxCycle
assigned to a UE
may be less than
the configured LBFD-002017 /
value. NO NO No TDLBFD-002017

of the DRX Short
Cycle Timer. If this
parameter is set to
1, the length of this
timer is one short
DRX cycle. If this
parameter is set to
2, the length of this
timer is two short
DRX cycles. If this
parameter is set to
a large value, a UE
for which short DRX
cycles are enabled
stays in short-cycle
DRX for a long
time. For details,
see 3GPP TS LBFD-002017 /
36.321 5.7. NO NO No TDLBFD-002017
Indicates the local
cell within an
Indicates the
received signal
strength indicator
(RSSI) of the
GERAN BCCH
ARFCN that a UE
needs to measure
to determine
whether it is
tolerant of the
interference from
the cells working on
this frequency. YES YES No MRFD-231808
Indicates the
GERAN band to
which the absolute
radio frequency
channel number
(ARFCN) that the
UE needs to
measure belongs. If
the GERAN ARFCN
is in the range of
512 to 810, the
value of this
parameter is used
to indicate whether
the GERAN ARFCN
is in the DCS 1800
MHz band or the
PCS 1900 MHz
band. If the GERAN
ARFCN is in neither
band, this
parameter does not
take effect and can
be set to either
value. For details,
see 3GPP TS
36.331. NO NO No MRFD-231808
Indicates the local
ID of the cell. It
LOFD-001019 /
TDLOFD-001019
LOFD-001020 /
Indicates the ID of TDLOFD-001020
the common LOFD-001021 /
parameter group TDLOFD-001021
related to inter-RAT TDLOFD-001022
handover. YES YES No TDLOFD-001023
Indicates the
hysteresis for inter-
RAT measurement
events A1 and A2.
This parameter is
used to prevent
frequent triggering
of event evaluation
caused by radio
signal fluctuation. In
this way, the LOFD-001019 /
probability of ping- TDLOFD-001019
pong handovers or LOFD-001020 /
handover decision TDLOFD-001020
errors is reduced. A LOFD-001021 /
larger value of this TDLOFD-001021
parameter results in TDLOFD-001022
a lower probability. NO NO No TDLOFD-001023
Indicates the time-
to-trigger for inter-
RAT measurement
event A1 or A2.
When detecting that
the signal quality in
the serving cell
meets the entering
condition, the UE
does not send a
measurement
report to the
eNodeB
immediately.
Instead, the UE
sends a report only
when the signal
quality continuously
meets the entering
condition during the
time-to-trigger.
This parameter
helps decrease the
number of
occasionally
triggered event
reports, the
average number of LOFD-001019 /
handovers, and the TDLOFD-001019
number of wrong LOFD-001020 /
handovers. In TDLOFD-001020
summary, it helps LOFD-001021 /
prevent TDLOFD-001021
unnecessary TDLOFD-001022
Indicates the RSRP

RAT measurement
event A1. When the
measured RSRP
value of the serving
cell exceeds this
threshold, an event
A1 report will be
sent. The value
-141 does not take
effect and is LOFD-001019 /
reserved for forward TDLOFD-001019
compatibility. If this LOFD-001020 /
-141, the value -140 LOFD-001021 /
is used as the TDLOFD-001021
threshold in TDLOFD-001022
implementation. NO NO No TDLOFD-001023
Indicates the RSRQ
RAT measurement
event A1. LOFD-001019 /
When the TDLOFD-001019
measured RSRQ LOFD-001020 /
value of the serving TDLOFD-001020
cell exceeds this LOFD-001021 /
threshold, an event TDLOFD-001021
A1 report will be TDLOFD-001022
Indicates the RSRP

RAT measurement
event A2.
When the
measured RSRP
value of the serving
cell is below this
threshold, an event
A2 report will be
sent. The value
-141 does not take
effect and is LOFD-001019 /
reserved for forward TDLOFD-001019
compatibility. If this LOFD-001020 /
-141, the value -140 LOFD-001021 /
is used as the TDLOFD-001021
threshold in TDLOFD-001022
Indicates the RSRQ

RAT measurement
event A2. LOFD-001019 /
When the TDLOFD-001019
value of the serving TDLOFD-001020
cell is below this LOFD-001021 /
threshold, an event TDLOFD-001021
A2 report will be TDLOFD-001022
of the event A2
RAT blind
redirections relative
to the event A2
threshold for
handovers. This LOFD-001019 /
parameter is TDLOFD-001019
reserved for forward LOFD-001020 /
compatibility. It TDLOFD-001020
does not take effect LOFD-001021 /
currently. NO NO No TDLOFD-001021
Indicates the local

ID of the cell. It
Indicates the ID of
the parameter
group related to
inter-RAT handover
to CDMA2000
1xRTT. YES YES No None
Indicates the
hysteresis for event
B1 for inter-RAT
handover to
CDMA2000 1xRTT.
This parameter is
used to prevent
frequent triggering
of event evaluation
caused by radio
this way, the
probability of ping-
pong handovers or
handover decision
errors is reduced. A
parameter results in
a lower probability
of ping-pong
handovers or
handover decision LOFD-001090 /
errors. NO NO No TDLOFD-001090
Indicates the pilot

strength threshold
for event B1 related
to coverage-based
inter-RAT handover
to CDMA2000
1xRTT. When the
measurement value
exceeds this
threshold, a
measurement
report will be sent. NO NO No None
Indicates the time-
to-trigger for event
B1 related to inter-
RAT handover to
CDMA2000 1xRTT.
When detecting that
at least one
neighboring cell
meets the entering
condition, the UE
does not send a
measurement
report to the
eNodeB
immediately.
Instead, the UE
sends a report only
when the signal
meets the entering
time-to-trigger.
This parameter
helps decrease the
number of
occasionally
triggered event
reports, the
average number of
handovers and the
number of wrong
handovers,
preventing
unnecessary LOFD-001090 /
Indicates the pilot

strength threshold
to load- or service-
based inter-RAT
handover to
CDMA2000 1xRTT.
When the
measurement value
exceeds this
threshold, a
report will be sent. NO NO No TDLOFD-001021
Indicates the local
cell identity. It
cell within an
Indicates the RLF

timer and constants LBFD-002007 /
group ID. YES YES No TDLBFD-002007

of the timer T301.
of the timer T310.

of the timer T311.
Indicates the
maximum number
of successive "out
of sync" indications
received from L1.
Indicates the
maximum number
of successive "in
sync" indications
received from L1.
Indicates the
extended QoS
Class Identifier
(QCI), which is
required by the
operator for service
differentiation. YES YES No LBFD-002032
Indicates the local

ID of the cell. It
LBFD-00201802 /
Indicates the ID of a TDLBFD-00201802
parameter group LBFD-00201804 /
related to inter- TDLBFD-00201804
handover. NO NO No TDLBFD-00201805
parameter group
related to inter-RAT
handover to
CDMA2000 1xRTT. NO NO No LOFD-001021
parameter group
handover to
CDMA2000 HRPD. NO NO No LOFD-001021
LOFD-001019 /
Indicates the ID of a TDLOFD-001019
group of common LOFD-001020 /
parameters related TDLOFD-001020
to inter-RAT LOFD-001021 /
handover. NO NO No TDLOFD-001021
parameter group
handover to LOFD-001020 /
GERAN. NO NO No TDLOFD-001020
parameter group
UTRAN. NO NO No TDLOFD-001019
parameter group
related to intra-
DRX parameter LBFD-002017 /
Indicates the RLF

indication. NO NO No TDLBFD-002007
Indicates the RLF

group ID. NO NO No TDLBFD-002007
Indicates the
waiting duration for
the eNodeB to
release services
with a specific QCI
after the eNodeB
detects that the
radio link is
abnormal. When
the eNodeB detects
that the radio link is
abnormal, the
eNodeB waits for
the UE to initiate an
RRC connection
reestablishment
procedure to
restore services. If
the waiting duration
times out, the
eNodeB releases LBFD-002008 /
the services. NO NO No TDLBFD-002008
Indicates the local
ID of the cell. It
Indicates the QoS

class identifier
(QCI) of an evolved
packet system
(EPS) bearer.
Different QCIs
indicate different
QoS requirements,
such as the packet
delay budget,
packet error loss
rate, and resource LBFD-002025 /
type. For details, TDLBFD-002025
see Table 6.1.7 in LOFD-00101502 /
3GPP TS 23.203. YES YES No TDLOFD-00101502
parameter group LBFD-00201804 /
related to inter- TDLBFD-00201804
parameter group LOFD-001035 /
related to inter-RAT TDLOFD-001035
CDMA2000 1xRTT. NO NO No TDLOFD-001021
parameter group
CDMA2000 HRPD. NO NO No TDLOFD-001021
LOFD-001019 /
TDLOFD-001019
common parameter TDLOFD-001020
group related to LOFD-001021 /
inter-RAT handover. NO NO No TDLOFD-001021
parameter group
GERAN. NO NO No TDLOFD-001020
parameter group
parameter group
related to intra-
DRX parameter LBFD-002017 /
Indicates the
interval at which
scheduling request LBFD-002003 /
indicators are sent. NO NO No TDLBFD-002003
Indicates the RLF

indication. NO NO No TDLBFD-002007
Indicates the RLF

group ID. NO NO No TDLBFD-002007
Indicates the
waiting duration for
the eNodeB to
release services
with a specific QCI
after the eNodeB
detects that the
radio link is
abnormal. When
the eNodeB detects
that the radio link is
abnormal, the
eNodeB waits for
the UE to initiate an
RRC connection
reestablishment
procedure to
restore services. If
the waiting duration
times out, the
eNodeB releases LBFD-002008 /
the services. NO NO No TDLBFD-002008
Indicates the local

ID of the cell. It
Indicates the ID of
the parameter
group related to
inter-RAT handover
to CDMA2000 LOFD-001021 /
HRPD. YES YES No TDLOFD-001021
Indicates the
RAT handover to
CDMA2000 HRPD.
This parameter is
used to prevent
frequent triggering
of event evaluation
caused by radio
this way, the
pong handovers or
handover decision
a lower probability
of ping-pong
handovers or
handover decision LOFD-001021 /
Indicates the pilot

strength threshold
based inter-RAT
handover to
CDMA2000 HRPD.
When the
measurement value
exceeds this
threshold, a
Indicates the time-
RAT handover to
CDMA2000 HRPD.
When detecting that
at least one
neighboring cell
meets the entering
condition, the UE
does not send a
measurement
report to the
eNodeB
immediately.
Instead, the UE
sends a report only
when the signal
meets the entering
time-to-trigger.
This parameter
helps decrease the
number of
occasionally
triggered event
reports, the
average number of
handovers and the
number of wrong
handovers,
preventing
unnecessary LOFD-001021 /
Indicates the pilot

strength threshold
based inter-RAT
handover to
CDMA2000 HRPD.
When the
measurement value
exceeds this
threshold, a
Indicates the B2
RSRP threshold 1
used during
optimized
handovers from E-
UTRAN to
CDMA2000 LOFD-001021 /
eHRPD. NO NO No TDLOFD-001021
Indicates the B2
RSRQ threshold 1
used during
optimized
handovers from E-
UTRAN to
CDMA2000 LOFD-001021 /
eHRPD. NO NO No TDLOFD-001021
Indicates the local

ID of the cell. It
Indicates the ID of
the parameter
inter-RAT handover TDLOFD-001020
to GERAN. YES YES No TDLOFD-001023
Indicates the
RAT handover to
GERAN. This
parameter is used
to prevent frequent
triggering of event
evaluation caused
by radio signal
fluctuation. In this
way, the probability
of ping-pong
handovers or
handover decision
a lower probability
of ping-pong
handovers or LOFD-001020 /
Indicates the RSSI

threshold for event
B1 related to
coverage-based
inter-RAT handover
to GERAN.
A UE sends a
measurement
report related to
event B1 to the
eNodeB when the
RSSI in at least one
GERAN cell
exceeds this
threshold and other
triggering
conditions are met.
For details, see LOFD-001020 /
3GPP TS 36.331. NO NO No TDLOFD-001020
Indicates the time-
RAT handover to
GERAN. When
detecting that the
signal quality in at
least one
neighboring cell
meets the entering
condition, the UE
does not send a
measurement
report to the
eNodeB
immediately.
Instead, the UE
sends a report only
when the signal
meets the entering
time-to-trigger.
This parameter
helps decrease the
number of
occasionally
triggered event
reports, the
average number of
handovers and the
number of wrong
handovers,
preventing LOFD-001020 /
Indicates the RSSI

threshold for event
B1 related to load-
or service-based
inter-RAT handover
to GERAN.
When the
measured RSSI
value exceeds this
threshold, a
Indicates the local
ID of the cell. It
Indicates the ID of
the parameter
inter-RAT handover TDLOFD-001019
to UTRAN. YES YES No TDLOFD-001022
Indicates the Ec/N0
threshold for event
B1 related to
coverage-based
inter-RAT handover
to UTRAN. This
parameter specifies
the requirement for
Ec/N0 of the target
UTRAN cell. For a
cell with large signal
fading variance, set
this parameter to a
large value to
prevent
unnecessary
handovers. For a
cell with small
signal fading
variance, set this
parameter to a
small value to
ensure timely
handovers. A large
value of this
a low probability of
handover to the
UTRAN cell, and a
small value leads to
a high probability.
When the
measurement value
exceeds this
threshold, a LOFD-001019 /
measurement TDLOFD-001019
Indicates the RSCP

threshold for event
B1 related to
coverage-based
inter-RAT handover
to UTRAN.
This parameter
specifies the
requirement for
RSCP of the target
UTRAN cell.
When the
measurement value
exceeds this
threshold, a LOFD-001019 /
Indicates the
RAT handover to
UTRAN. This
parameter is used
to prevent frequent
triggering of event
evaluation caused
by radio signal
fluctuation. In this
way, the probability
of ping-pong
handovers or
handover decision
a lower probability
of ping-pong
handovers or LOFD-001019 /
Indicates the time-
RAT handover to
UTRAN. When
detecting that the
least one
neighboring cell
meets the entering
condition, the UE
does not send a
measurement
report to the
eNodeB
immediately.
Instead, the UE
sends a report only
when the signal
meets the entering
time-to-trigger.
This parameter
helps decrease the
number of
occasionally
triggered event
reports, the
average number of
handovers and the
number of wrong
handovers,
preventing LOFD-001019 /
Indicates the Ec/N0
threshold for event
B1 related to load-
or service-based
inter-RAT handover
to UTRAN.
This parameter
specifies the
requirement for
Ec/N0 of the target
UTRAN cell. When
the measurement
value exceeds this
threshold, a
measurement
report may be sent.
For a cell with large
signal fading
variance, set this
parameter to a
large value to
prevent
unnecessary
handovers. For a
cell with small
signal fading
variance, set this
parameter to a
small value to
ensure timely LOFD-001043
Indicates the RSCP
threshold for event
B1 related to load-
or service-based
inter-RAT handover
to UTRAN.
This parameter
specifies the
requirement for
RSCP of the target
UTRAN cell.
When the
measurement value
exceeds this
threshold, a
measurement LOFD-001043
Indicates the local

ID of the cell. It
Indicates the ID of
the parameter
group related to
inter-frequency
handover. YES YES No None
Indicates the
hysteresis for inter-
frequency
measurement
events A1 and A2.
This parameter is
used to prevent
frequent triggering
of event evaluation
caused by radio
this way, the
pong handovers or
handover decision
parameter results in LBFD-00201802 /
a lower probability. NO NO No TDLBFD-00201802
Indicates the time-
to-trigger for inter-
frequency
measurement event
A1 or A2.
When detecting that
the serving cell
meets the triggering
condition, the UE
does not send a
measurement
report to the
eNodeB
immediately.
Instead, the UE
sends a report only
when the signal
meets the entering
time-to-trigger. This
parameter helps
decrease the
number of
occasionally
triggered event
reports, the
average number of
handovers, and the
number of wrong
handovers. In
summary, it helps
prevent
unnecessary LBFD-00201802 /
Indicates the RSRP

frequency
measurement event
A1.
When the
measured RSRP
value exceeds this
threshold, a
measurement
report will be sent.
The value -141
does not take effect
and is reserved for
forward
compatibility. If this
parameter is set to
-141, the value -140
is used as the
threshold in LBFD-00201802 /
implementation. NO NO No TDLBFD-00201802
Indicates the RSRQ
frequency
measurement event
A1.
When the
measured RSRQ
value exceeds this
threshold, a
measurement LBFD-00201802 /
report will be sent. NO NO No TDLBFD-00201802
Indicates the RSRP

frequency
measurement event
A2.
When the
measured RSRP
value is below the
threshold, a
measurement
The value -141
and is reserved for
forward
parameter is set to
is used as the
Indicates the RSRQ
frequency
measurement event
A2.
When the
measured RSRQ
value is below this
threshold, a
report will be sent. NO NO No TDLBFD-00201802
Indicates the
A4. This parameter
is used to prevent
frequent triggering
of event evaluation
caused by radio
this way, the
pong handovers or LBFD-00201802 /
handover decision TDLBFD-00201802
errors is reduced. A LBFD-00201804 /
larger value of this TDLBFD-00201804
parameter results in LBFD-00201805 /
a lower probability. NO NO No TDLBFD-00201805
Indicates the RSRP
threshold for event
A4 related to
coverage-based
inter-frequency
handover. When
the measured
RSRP value
exceeds this
threshold, an inter-
frequency
measurement
The value -141
and is reserved for
forward
parameter is set to
is used as the
threshold in
implementation.The
value of this
parameter is also
used as the RSRP
threshold for event
A4 related to
distance-based,
UL-power-based, or
SPID-based inter- LBFD-00201802 /
frequency handover TDLBFD-00201802
back to the LBFD-00201804 /
HPLMN. NO NO No TDLBFD-00201804
Indicates the RSRQ
threshold for event
A4 related to
coverage-based
inter-frequency
handover. When
the measured
RSRQ value
exceeds this
frequency
measurement
report will be
sent.The value of
this parameter is
also used as the
RSRQ threshold for
event A4 related to
distance-based,
UL-power-based, or
SPID-based inter- LBFD-00201802 /
back to the LBFD-00201804 /
HPLMN. NO NO No TDLBFD-00201804
Indicates the time-
A4 for the inter-
frequency
handover. When
detecting that the
least one
neighboring cell
meets the entering
condition, the UE
does not send a
measurement
report to the
eNodeB
immediately.
Instead, the UE
sends a report only
when the signal
meets the entering
time-to-trigger.
This parameter
helps decrease the
number of
occasionally
triggered event
reports, the
average number of
handovers, and the
number of wrong LBFD-00201802 /
handovers. In TDLBFD-00201802
summary, it helps LBFD-00201804 /
prevent TDLBFD-00201804
unnecessary LBFD-00201805 /
Indicates the RSRP
threshold for event
A4 related to load-
based inter-
frequency
handover. When
the measured
RSRP value
exceeds this
frequency
measurement
The value -141
and is reserved for
forward
parameter is set to
is used as the
threshold in
implementation.The
value of this
parameter is also
used as the RSRP
threshold for event
A4 related to
frequency-priority-
based or service-
based inter-
Indicates the RSRQ
threshold for event
A4 related to load-
based inter-
frequency
handover. When
the measured
RSRQ value
exceeds this
frequency
measurement
report will be
sent.The value of
this parameter is
also used as the
RSRQ threshold for
event A4 related to
frequency-priority-
based or service-
based inter-
Indicates the RSRP

threshold for
frequency-priority-
based inter-
frequency
measurement event
A1. When the
measured RSRP
value exceeds this
threshold, an event
A1 report will be
sent. The value
-141 does not take
effect, and is
reserved for forward
parameter is set to
is used as the
threshold in
implementation. NO NO No None
Indicates the RSRQ
threshold for
frequency-priority-
based inter-
frequency
measurement event
A1.
When the
measured RSRQ
value exceeds this
threshold, an event
A1 report will be
sent. NO NO No None

for event A3
associated with
inter-frequency
handover. This
parameter
determines the
border between the
serving cell and the
neighboring cell. If
to a large value, an
inter-frequency
handover is
performed only
when the signal
quality of the
neighboring cell is
significantly better
than that of the
serving cell and
other triggering
conditions are met.
Indicates the RSRP
threshold for event
A1 associated with
event-A3-triggered
inter-frequency
handover. When
the measured
RSRP value
exceeds this
threshold, a
measurement
The value -141
and is reserved for
forward
parameter is set to
is used as the
Indicates the RSRP
threshold for event
A2 associated with
event-A3-triggered
inter-frequency
handover. When
the measured
RSRP value is
below the
threshold, a
measurement
The value -141
and is reserved for
forward
parameter is set to
is used as the
Indicates the RSRP

threshold for
frequency-priority-
based inter-
frequency
measurement event
A2.
If the measured
RSRP value is less
an event A2 report
will be sent. NO NO No None
Indicates the RSRQ
frequency
measurement event
A2.
When the
measured RSRQ
value is below this
threshold, a
measurement
report will be sent. NO NO No None
Indicates the local

ID of the cell. It
Indicates the ID of
the parameter
group related to
intra-frequency
handover. YES YES No None
Indicates the
hysteresis for intra-
frequency handover
event A3. This
parameter
decreases frequent
event triggering due
to radio signal
fluctuations and
reduces the
probability of
handover decision
errors and ping-
pong handovers. A
a lower probability.
The hysteresis for
inter-frequency
handover event A3
is the same as the
value of this
parameter. For
details, see 3GPP LBFD-00201801 /
TS 36.331. NO NO No TDLBFD-00201801

for event A3. If the
parameter is set to
a large value, an
intra-frequency
handover is
performed only
when the signal
quality of the
neighboring cell is
than that of the
serving cell and
other triggering
conditions are met.
signal quality in the
serving cell and that
in at least one
neighboring cell
meet the entering
condition, it does
not immediately
send a
measurement
report to the
eNodeB. Instead,
the UE sends a
report only when
the signal quality
meets the entering
condition
throughout the
time-to-trigger.
This parameter
helps decrease the
number of
occasionally
triggered event
reports, the
average number of
handovers, and the
number of incorrect
handovers,
preventing
unnecessary
handovers. The
time-to-trigger for
inter-frequency
handover event A3
is the same as the
value of this LBFD-00201801 /
Indicates the local

cell within an
Indicates the QoS

class identifier
(QCI) of an evolved
packet system
(EPS) bearer.
Different QCIs
indicate different
QoS requirements,
such as the packet
delay budget,
packet error loss
rate, and resource
type. For details,
see Table 6.1.7 in
Indicates reserved
32-bit switch
parameter 0 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
32-bit switch
parameter 1 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
32-bit switch
parameter 2 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 2 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 3 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 4 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 5 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 6 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 7 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 8 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 9 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates the index

of the operator. YES YES No LOFD-001086
Indicates the name

of the operator. The
name is a string of
a maximum of 32
characters. The
string cannot be all
null characters or
contain any of the
following
characters: double
quotation marks ("),
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive LOFD-001036 /
spaces, and two or TDLOFD-001036
more consecutive LOFD-001086 /
percent signs (%). NO YES No TDLOFD-001086
Indicates the type
of the operator. The
operator can be the
primary operator or
a secondary
operator. For each
eNodeB, only one
primary operator LOFD-001036 /
but more than one TDLOFD-001036
secondary operator LOFD-001086 /
can be configured. NO YES No TDLOFD-001086
LOFD-001036 /
Indicates the mobile TDLOFD-001036
country code (MCC) LOFD-001086 /
of the operator. NO YES No TDLOFD-001086

network code
(MNC) of the
operator. The value
a string of two or
three characters, LOFD-001036 /
each of which must TDLOFD-001036
be a digit in the LOFD-001086 /
range from 0 to 9. NO YES No TDLOFD-001086
Indicates the ID of
the IP path. YES YES No None
LOFD-001036 /
TDLOFD-001036
the operator. NO YES No TDLOFD-001037
Indicates the
tracking area ID,
which uniquely
identifies an entry
of tracking area
information. This
parameter is used
only within the
eNodeB and is not
used during the
information
exchange with the
EPC. This is LOFD-001036 /
different from the TDLOFD-001036
TAI configured in LOFD-001037 /
the EPC TAL. YES YES No TDLOFD-001037
LOFD-001036 /
TDLOFD-001036
of the operator. NO YES No TDLOFD-001037
Indicates the
tracking area code
(TAC), which is
used by the EPC to
determine the area
within which paging
messages are sent.
One tracking area
is comprised of one
or more cells. Two
TAC values
0x0000(0) and
0xFFFE(65534) are
reserved according
to the protocol and
will not be used in
future versions.
Therefore, do not
use 0 or 65534 as a LOFD-001036 /
TAC value in TAC TDLOFD-001036
planning or LOFD-001037 /
configuration. NO YES No TDLOFD-001037
LOFD-001036 /
TDLOFD-001036
Indicates whether
emergency calls. It
is recommended
that this parameter
be set to a value in
accordance with the
actual emergency
call capability of the LBFD-002028 /
operator. NO NO No TDLBFD-002028
Indicates whether
the operator
supports
emergency calls
initiated by UEs in LBFD-002028 /
limited mode. NO NO No TDLBFD-002028
Indicates the
Allocation and
Retention Priority
(ARP) value of the
dedicated
emergency call LBFD-002028 /
bearer. NO NO No TDLBFD-002028
Indicates the
Allocation and
Retention Priority
(ARP) value of the
default emergency LBFD-002028 /
call bearer. NO NO No TDLBFD-002028
Indicates the mode

of outputting call
history records
(CHRs).ALL_OUTP
UT means both
normal and
abnormal calls are
output. When there
is no storage space
for new CHRs, a
new record will
cover the beginning
one.ABNORMAL_N
ORMAL_SAMPLE
means calls are
output based on the
storage space and
the proportion of
normalcalls to
abnormal calls.
Ensure that CHR
recording time
meets the
requirement.ABNO
RMAL_ALL_NORM
AL_SAMPLE
means all abnormal
calls are output and
the normal calls are
output based on the
proportion of
normal calls to
abnormal calls. NO NO No None
Indicates the
percentage of
CHRs for abnormal
calls in the CHR
output. For
example, if this
parameter is set to
90, the percentage
of CHRs for
abnormal calls in
the CHR output is
90% and that of
CHRs for normal
calls is 10%. This
when CHR Output
Mode is set to
ALL_OUTPUT. This
parameter takes
effect immediately
after being set or
modified, and the
CHR output will be
refreshed. NO NO No None
Indicateds the
maximum number
of internal call
history records
(CHR) be stored.
For example, if this
parameter is set to
4000, 4000 CHRs
can be stored. (The
size of a CHR for
one call is about 6
KB, and the storage
space is 24 MB.)
This parameter is
invalid when CHR
Output Mode is set
to ALL_OUTPUT or
ABNORMAL_ALL_
NORMAL_SAMPLE
. When CHR Output
Mode is set to
ABNORMAL_NOR
MAL_SAMPLE, the
value of this
parameter indicates
the expected
number of CHRs
that can be stored,
and you are
advised to estimate
the value of this
parameter based
on the actual
storage space and
the size of a CHR. NO NO No None
Indicates the
eNodeB sharing
mode, which can be
independent
operator mode,
shared frequency LOFD-001036 /
sharing mode, or TDLOFD-001036
separate frequency LOFD-001037 /
sharing mode. NO NO No TDLOFD-001037
Indicates whether
X2 setup by SON. NO NO No None
Indicates the
method of X2 setup
by SON, that is, the
method of
automatically
setting up X2
interfaces. The
value
X2_OVER_M2000
can be set only for
Huawei eNodeBs,
and the value
X2_OVER_S1 can
be set for any
Indicates whether
to enable
scheduling request
indication (SRI)
adaptation. If this
switch is turned on,
the SRI period
adaptively changes
based on the SRI
algorithm. If this
the SRI period is
the value of the
SriPeriod parameter
in the
CellStandardQci LBFD-002003 /
MO. NO NO No TDLBFD-002003
Indicates whether
to set a logical
channel group
profile.
Currently, two
logical channel
group profiles are
available:
LCG_PROFILE_0
and
LCG_PROFILE_1.
If LCG_PROFILE_0
is used, only one
logical channel
group is assigned
to non-GBR
services. If
LCG_PROFILE_1
is used, two logical
channel groups are
assigned to non-
GBR services: one
to high-priority non-
GBR services and LBFD-002025 /
the other to low- TDLBFD-002025
priority non-GBR LOFD-00101502 /
Indicates whether
RAN information
management (RIM)
for handovers
within an RNC pool.
An RNC pool can
be used for load
balancing between
RNCs. An RNC can
take over a cell that
was controlled by
another RNC in the
pool. NO NO No None
Indicates whether
the eNodeB
simultaneously
sends Uu
messages during
security mode
activation and
reconfiguration. If
on, the eNodeB
simultaneously
sends Uu
messages. If this
the eNodeB sends
Uu messages one LBFD-002007 /
by one. NO NO No TDLBFD-002007
CME and
modifications to the
parameters of a
neighboring
eNodeB will be
updated on the
local eNodeB
through messages
over the X2
interface. These
parameters include
eNodeBId, CellId,
LocalCellId,
CnOperator,
CnOperatorTa,
CellOp, PhyCellId,
and DlEarfcn. This
prevents the
configuration data
from being lost or
abnormal during the
automatic update.
This switch must be
turned on if the
interlocking
modification
function on the
CME is not used
and the eNodeB
configuration data
on a network is to
be modified by
using the automatic
eNodeB
configuration
update over the X2 LOFD-002001 /
Indicates whether
to enable the X2
interface self-setup
function for the
target operator. NO NO No None
Indicates whether
to select transport
network layer (TNL)
parameters based
on the primary
PLMN ID or
selected PLMN ID
that contained in
the SON
configuration
message. This
parameter is used
for X2 self-setup in
RAN sharing
scenarios.
Selecting TNL
parameters based
on the primary
PLMN ID applies to
X2 self-setup
between eNodeBs
provided by
different suppliers.
For X2 self-setup
between Huawei
eNodeBs, selecting
TNL parameters
based on the
selected PLMN ID
is used in
preference. NO NO No None
Indicates the UMTS
load transmission
channel. The
eNodeB sends
RAN-
INFORMATION-
REQUEST PDUs to
UTRAN cells to
request multiple
reports on the load
status of UTRAN
cells only when the
parameter is set to
BASED_ON_RIM.T
he function
specified by the
parameter value
BASED_ON_ECO
is temporarily
unavailable. NO NO No None
controlling the data
forwarding
mechanism in S1-
based incoming
handovers.
If the switch is
turned off, uplink
data forwarding and
downlink data
forwarding are
separately
determined.
If this switch is
turned on, uplink
data forwarding and
downlink data
forwarding are
determined
together. The target
eNodeB sends the
destination address
to the source
eNodeB only if both
uplink data and
downlink data need
to be forwarded. If
either the uplink
data or downlink
data does not need
to be forwarded, the
target eNodeB does
not send the
destination address
to the source
fail again. As a
result, the UE
initiates an RRC
connection
reestablishment
procedure again. If
this repeatedly
happens, the UE
repeatedly initiates
RRC connection
reestablishment. If
this parameter is
set to 0, the
function of RRC
connection
reestablishment
protection is not
used. If this
parameter is set to
a value other than
0, the eNodeB
rejects the RRC
connection
reestablishment
request due to
reconfigurationFailu
re from a UE when
the number of RRC
connection
reestablishment
requests initiated by
the UE served by
the eNodeB due to
reconfigurationFailu
re has exceeded
the parameter value
within 1 minute. NO NO No None
Indicates the time
during which the X2
interface
configuration is
retained for a local
eNodeB and a peer
eNodeB when the
two eNodeBs do
not have a neighbor
relationship with
each other. If the
X2 interface
configuration is
retained for a local
eNodeB and a peer
eNodeB and the
local eNodeB
determines that a
neighbor
relationship is not
configured for the
local and peer
eNodeBs, the local
eNodeB starts the
timer and removes
the X2 interface
configuration when
the timer expires. If
this parameter is
set to 0, the
function of
automatic X2
interface
configuration LOFD-002001 /
removal is disabled. NO NO No TDLBFD-002001
Indicates the
eNodeB coding
scheme for Global
eNodeB ID IE and
Reporting Cell ID IE
in the RIM
message. If the
EPC devices that
exchange RIM
messages with
eNodeBs are
provided by Huawei
and the peer
devices adopt the
private coding
scheme, set this
parameter to
Private Coding. In
other cases, set this
parameter to
Standard Coding. NO NO No None
Indicates whether
the handover
request message
for a handover from
E-UTRAN to
UTRAN or GERAN
contains the UE-
EUTRA-Capability
information element
(IE). NO NO No LOFD-001019
Indicates whether
MMEs of operators
that share the
eNodeB can be
configured with the
same mobility
management entity
code (MMEC). If
this parameter is
set to OFF(Off),
MMEs of operators
that share the
eNodeB cannot be
configured with the
same MMEC. If this
parameter is set to
ON(On), MMEs of
operators that
share the eNodeB
can be configured
with the same LOFD-001018 /
MMEC. NO NO No TDLOFD-001018
LOFD-001036 /
TDLOFD-001036
Indicates the
proportion of the
maximum number
of RRC connected
users for the
operator at the
shared eNodeB.
This parameter
must be set LOFD-001036 /
according to the TDLOFD-001036
contract signed by LOFD-001037 /
the operators. NO YES No TDLOFD-001037
Indicates the
proportion of users
that the operator
can share to other
operators when the
eNodeB is shared
among operators.
This parameter
must be set based
on the contract
signed by LOFD-001113
operators. NO NO No TDLBFD-004014
Indicates the
minimum length of
the S1 re-
establishment timer. NO NO No None
Indicates the
maximum length of
the S1 re-
establishment timer. NO NO No None
Indicates the ID of
Indicates reserved
32-bit switch
parameter 0 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
32-bit switch
parameter 1 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
32-bit switch
parameter 2 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 2 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 3 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 4 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 5 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 6 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 7 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 8 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 9 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
LBFD-00300101 /
TDLBFD-00300101
LBFD-00300102 /
TDLBFD-00300102
LBFD-00300103 /
TDLBFD-00300103
the IP path. YES YES No TDLOFD-001018
LBFD-00300101 /
TDLBFD-00300101
LBFD-00300102 /
TDLBFD-00300102
LBFD-00300103 /
application type of LOFD-001018 /
the IP path. NO YES No TDLOFD-001018
Indicates the S1 LBFD-00300101 /

interface ID of the TDLBFD-00300101
IP path. This LBFD-00300102 /
parameter is TDLBFD-00300102
unavailable in this LBFD-00300103 /
version, it is TDLBFD-00300103
recommended to be LOFD-001018 /
set as 0. NO YES No TDLOFD-001018
LBFD-00300101 /
TDLBFD-00300101
LBFD-00300102 /
TDLBFD-00300102
LBFD-00300103 /
Indicates the X2 TDLBFD-00300103
interface ID of the LOFD-001018 /
IP path. NO YES No TDLOFD-001018
LBFD-00300101 /
TDLBFD-00300101
LBFD-00300102 /
TDLBFD-00300102
LBFD-00300103 /
Indicates the S1 TDLBFD-00300103
object ID. YES YES No TDLOFD-001018
LBFD-00300101 /
TDLBFD-00300101
LBFD-00300102 /
TDLBFD-00300102
the operator that TDLBFD-00300103
owns the S1 object. NO YES No TDLOFD-001018
LBFD-00300101 /
TDLBFD-00300101
the control-plane TDLBFD-00300102
end point group LBFD-00300103 /
used by the S1 TDLBFD-00300103
object. NO YES No TDLOFD-001018
LBFD-00300101 /
TDLBFD-00300101
LBFD-00300102 /
Indicates the ID of TDLBFD-00300102
the user-plane end LBFD-00300103 /
point group used by TDLBFD-00300103
the S1 object. NO YES No TDLOFD-001018
Indicates the
compliance protocol
release of the
MMEs to which the LBFD-00300101 /
eNodeB is TDLBFD-00300101
connected through LBFD-00300102 /
the S1 interfaces TDLBFD-00300102
under this S1 LBFD-00300103 /
object. NO NO No TDLBFD-00300103
LBFD-00300101 /
TDLBFD-00300101
LBFD-00300102 /
description of the LBFD-00300103 /
S1 object. NO NO No TDLBFD-00300103
LBFD-00300101 /
TDLBFD-00300101
to configure the TDLBFD-00300102
control-plane or LBFD-00300103 /
user-plane end TDLBFD-00300103
point group. NO NO No TDLOFD-001018
Indicates the
priority of an MME
to which the
eNodeB is
connected through
the S1 interface. A
large parameter
value indicates a
high priority. After
this parameter is LBFD-00300101 /
set for MMEs, the TDLBFD-00300101
eNodeB can select LBFD-00300102 /
a high-priority MME TDLBFD-00300102
for UEs attempting LBFD-00300103 /
to access the TDLBFD-00300103
network. NO NO No TDLOFD-001018
Indicates the S1
interface ID. NO NO Yes None

of the S1 interface. NO NO Yes None
Indicates whether
the S1 interface is
blocked. An S1
interface is blocked
after the execution
of BLK
S1INTERFACE and
is unblocked after
the execution of
UBL
S1INTERFACE. NO NO Yes None
Indicates the ID of
the control port
bearer for the S1
of the control port
(CP) bearer for the
S1 interface. NO NO Yes None
LBFD-00300101 /
TDLBFD-00300101
LBFD-00300102 /
TDLBFD-00300102
LBFD-00300103 /
the S1 interface. YES YES No TDLOFD-001018
LBFD-00300101 /
TDLBFD-00300101
LBFD-00300102 /
the control port LBFD-00300103 /
bearer for the S1 TDLBFD-00300103
interface. NO YES No TDLOFD-001018
LBFD-00300101 /
TDLBFD-00300101
LBFD-00300102 /
the operator that LBFD-00300103 /
owns the S1 TDLBFD-00300103
interface. NO YES No TDLOFD-001018
Indicates the
compliance protocol
release of the MME
to which the
eNodeB is
connected through
the S1 interface.
The eNodeB sends
S1 messages
complying with the
protocol release
specified by this
parameter. The
value of this
parameter must be
the same as the
MME-complied
protocol release. If
the parameter value
is different from the
MME-complied LBFD-00300101 /
protocol release, TDLBFD-00300101
the way in which LBFD-00300102 /
the MME handles TDLBFD-00300102
these message is LBFD-00300103 /
subject to the MME TDLBFD-00300103
Indicates whether
the S1 interface is
blocked. An S1
interface is blocked
after the execution LBFD-00300101 /
of BLK TDLBFD-00300101
S1INTERFACE and LBFD-00300102 /
is unblocked after TDLBFD-00300102
the execution of LBFD-00300103 /
UBL TDLBFD-00300103
S1INTERFACE. NO NO No TDLOFD-001018
Indicates the
control mode of the
S1 interface, which
determines the
control policies of
users and the SON
function on the S1
interface. When it is
set to
MANUAL_MODE,
only users can
control the S1
set to
AUTO_MODE, both
users and the SON
function can control
the S1 interface.
The control policies
set in this
parameter also
apply to the
MmeFeatureCfg
MO. When the SON
function
automatically sets
up an S1 interface,
this parameter is
set to
AUTO_MODE by
default. When users
add or modify an LBFD-00300101 /
S1 interface, users TDLBFD-00300101
can set this LBFD-00300102 /
parameter to TDLBFD-00300102
AUTO_MODE or LBFD-00300103 /
MANUAL_MODE. NO NO No TDLBFD-00300103
Indicates whether
the S1 interface is
created
automatically or
manually. This
parameter is set by
the system. Users
cannot modify the
parameter setting.
The system sets
this parameter to
AUTO_CREATE
when the S1
interface is created
automatically using
the SON function
and to
MANUAL_CREATE LBFD-00300101 /
when the S1 TDLBFD-00300101
interface is created LBFD-00300102 /
manually by using TDLBFD-00300102
the CME or running LBFD-00300103 /
an MML command. NO NO No TDLBFD-00300103
Indicates the
priority of an MME
to which the
eNodeB is
connected through
the S1 interface. A
large parameter
value indicates a
high priority. After
this parameter is LBFD-00300101 /
set for MMEs, the TDLBFD-00300101
eNodeB can select LBFD-00300102 /
a high-priority MME TDLBFD-00300102
for UEs attempting LBFD-00300103 /
to access the TDLBFD-00300103
network. NO NO No TDLOFD-001018

of the S1 interface. NO NO Yes None
of the control port
bearer for the S1
Indicates whether
the MME connected
to the eNodeB over
the S1 interface is
overloaded. This
parameter is valid
after the S1
interface is
established. Before
the S1 interface is
established, the
MME load status is
NULL. For details
about the MME
load status after the
S1 interface is
established, see
3GPP TS 36.413. NO NO Yes None
Indicates the
number of users
that have accessed
the S1 interface. NO NO Yes None
Indicates the name

of the MME to
which the eNodeB
is connected
through the S1
interface. This
parameter is valid
after the S1
interface is
established and the
MME name is
contained in the S1
interface
establishing
response message
or the MME
configuration
update message. In
other conditions,
the parameter value
is NULL. For
details, see 3GPP
TS 36.413. NO NO Yes None
Indicates the IDs of
all served PLMNs of
the MME to which
the eNodeB is
connected. The ID
of a served PLMN
consists of the MCC
and MNC. PLMN
IDs are separated
by commas (,). NO NO Yes None
Indicates the Global

Unique MME
Identifiers
(GUMMEIs) of all
MME to which the
eNodeB is
connected. A
GUMMEI of a
serving MME
consists of the
MCC, MNC, MME
group ID, and MME
code. GUMMEIs
are separated by
commas (,). NO NO Yes None
Indicates the
capacity of the
connected MME
relative to that of
other MMEs. A
parameter indicates
a larger capacity
allowing UE access. NO NO Yes None
Indicates the
reason of the fault
on the S1 link. NO NO Yes None
Indicates the ID of
an S1 interface. YES YES No None
Indicates whether
the MME at the
other end of the S1
interface supports
Huawei-proprietary
positioning
procedures, which
are included in
minimization of
drive tests (MDT).
The value
DISABLE(disable)
indicates that the
MME does not
support the
procedures and
therefore the
eNodeB cannot
obtain UE location
information from the
MME through the
procedures. The
value
ENABLE(enable)
indicates the
opposite. NO NO No None
LBFD-00300101 /
TDLBFD-00300101
LBFD-00300102 /
TDLBFD-00300102
Indicates the X2 LBFD-00300103 /
object ID. YES YES No TDLBFD-00300103
LBFD-00300101 /
TDLBFD-00300101
the operator to TDLBFD-00300102
which the X2 MO LBFD-00300103 /
belongs. NO YES No TDLBFD-00300103
LBFD-00300101 /
the control-plane LBFD-00300102 /
end point group TDLBFD-00300102
used by the X2 LBFD-00300103 /
object. NO YES No TDLBFD-00300103
LBFD-00300101 /
TDLBFD-00300101
the user-plane end TDLBFD-00300102
point group used by LBFD-00300103 /
the X2 object. NO YES No TDLBFD-00300103
Indicates the
compliance protocol
release of the
neighboring
eNodeBs to which LBFD-00300101 /
the local eNodeB TDLBFD-00300101
are connected LBFD-00300102 /
through the X2 TDLBFD-00300102
interfaces managed LBFD-00300103 /
by the X2 MO. NO NO No TDLBFD-00300103
LBFD-00300101 /
TDLBFD-00300101
LBFD-00300102 /
description of the LBFD-00300103 /
X2 object. NO NO No TDLBFD-00300103
LBFD-00300101 /
to configure the LBFD-00300102 /
control-plane or TDLBFD-00300102
user-plane end LBFD-00300103 /
point group. NO NO No TDLBFD-00300103
of the CP bearer for
the X2 interface. NO NO Yes None
Indicates the X2
interface ID. NO NO Yes None

of the X2 interface. NO NO Yes None
Indicates the ID of
the CP bearer for
country code of the
neighboring
eNodeB to be
added to the list.
The value of this
parameter is a
string of three
characters, each of
which must be a
digit in the range of
0 to 9. YES YES No None
network code of the
neighboring
eNodeB to be
added to the list.
The value of this
parameter is a
string of two or
three characters,
each of which must
be a digit in the
range of 0 to 9. YES YES No None
Indicates the ID of
the neighboring
eNodeB to be
added to the list. YES YES No None
Indicates whether
the X2 list is a
blacklist or whitelist.
If a neighboring
eNodeB is added to
the X2 blacklist, an
X2 interface
between the local
eNodeB and this
neighboring
eNodeB cannot be
automatically set up
or the X2 interface
set up between the
local eNodeB and
this neighboring
eNodeB is
abnormal. If a
neighboring
eNodeB is added to
the X2 whitelist, the
X2 interface
between the local
eNodeB and this
neighboring
eNodeB cannot be
automatically
removed. NO NO No None
LBFD-00300101 /
TDLBFD-00300101
LBFD-00300102 /
TDLBFD-00300102
Indicates the X2 LBFD-00300103 /
interface ID. YES YES No TDLBFD-00300103
LBFD-00300101 /
TDLBFD-00300101
the control port TDLBFD-00300102
bearer for the X2 LBFD-00300103 /
LBFD-00300101 /
TDLBFD-00300101
the operator that TDLBFD-00300102
owns the X2 LBFD-00300103 /
LBFD-00300101 /
TDLBFD-00300101
protocol release TDLBFD-00300102
with which the peer LBFD-00300103 /
eNodeB complies. NO NO No TDLBFD-00300103
Indicates whether
the X2 interface can
be automatically
removed. This
parameter will be
removed in later
versions. In this
version, the setting
still synchronized
between the M2000
and the eNodeB, LBFD-00300101 /
but it is no longer TDLBFD-00300101
used internally. LBFD-00300102 /
Therefore, avoid TDLBFD-00300102
using this LBFD-00300103 /
Indicates the
control mode of the
X2 interface, which
determines the
control policies of
users and the SON
function on the X2
set to
MANUAL_MODE,
only users can
control the X2
set to
AUTO_MODE, both
users and the SON
function can control
the X2 interface.
When the SON
function
automatically sets
up an X2 interface,
this parameter is
set to
AUTO_MODE by
default. When users
add or modify an LBFD-00300101 /
X2 interface, users TDLBFD-00300101
can set this LBFD-00300102 /
parameter to TDLBFD-00300102
AUTO_MODE or LBFD-00300103 /
MANUAL_MODE. NO NO No TDLBFD-00300103
Indicates whether
the X2 interface is
created
automatically or
manually. This
parameter is set by
the system. Users
cannot modify the
parameter setting.
The system sets
this parameter to
AUTO_CREATE
when the X2
interface is created
automatically using
the SON function
and to
MANUAL_CREATE LBFD-00300101 /
when the X2 TDLBFD-00300101
interface is created LBFD-00300102 /
manually by using TDLBFD-00300102
the CME or running LBFD-00300103 /
an MML command. NO NO No TDLBFD-00300103
Indicates the ID of
the neighboring
eNodeB to which
the local eNodeB is
connected through
the X2 interface.
The combination of
this parameter and
NbrEnbPlmnId
uniquely identifies
the neighboring
eNodeB around the
globe. NO NO Yes None
Indicates the PLMN

ID of the
neighboring
eNodeB to which
the local eNodeB is
connected through

of the X2 interface.
If the status is
normal, the X2
interface has been
successfully
established. If the
status is abnormal,
the X2 interface
establishment fails. NO NO Yes None
Indicates the
reason why the X2
interface is
abnormal. NO NO Yes None
Indicates the DRX
switch. The setting
of this parameter
has no effect on LBFD-002017 /
dynamic DRX. NO NO No TDLBFD-002017
Indicates whether
short DRX cycles.
Short DRX cycles
reduce the traffic LBFD-002017 /
delay. NO NO No TDLBFD-002017
set the
TimeAlignmentTime
r parameter to a
value equal to or
greater than 10240
ms. If the
TimingAdvCmdOpt
Switch parameter is
set to ON, it is
recommended that
the
LongDrxCycleSpeci
al parameter be set
to a value smaller
ms. Otherwise, the
uplink time
alignment
performance of UEs
is affected. If the
TimingAdvCmdOpt
Switch parameter is
set to ON, it is
recommended that
the
TimeAlignmentTime
r parameter be set
to sf10240. A
TimeAlignmentTime
r parameter, such
as sf5120,
increases the
probability that UEs
in DRX mode
become uplink LBFD-002017 /
asynchronized. NO NO No TDLBFD-002017
of the On Duration
Timer that applies
only to non-power-
saving UEs whose
RFSP indexes are
contained in the
RFSP index set.
For details about
this timer, see
3GPP TS 36.321.
Because of the
impact of CQI
reporting intervals
and SRS
transmission
intervals, the actual
value of this
parameter assigned
to a UE may be
greater than the LBFD-002017 /
configured value. NO NO No TDLBFD-002017
of the DRX
Inactivity Timer that
applies only to non-
power-saving UEs
whose RFSP
indexes are
contained in the
RFSP index set.
For details about
this timer, see LBFD-002017 /
Indicates whether
short DRX cycles
for non-power-
saving UEs whose
RFSP indexes are
contained in the LBFD-002017 /
RFSP index set. NO NO No TDLBFD-002017
of a short DRX
cycle that is applied
only to non-power-
saving UEs whose
subscriber profile ID
for RAT/frequency
priority (RFSP)
indexes are
contained in the
RFSP index set.
According to 3GPP
specifications, the
length of a long
DRX cycle must be
an integer multiple
of that of a short
DRX cycle. In
addition, the actual
value of
LongDrxCycleSpeci
al assigned to a UE
may be less than
the configured
value because of
the impact of the
SRS bandwidth and
TA period specified
by the
TimeAlignmentTime
r parameter.
Therefore, the
actual value of
ShortDrxCycleSpeci
al assigned to a UE
may be less than
the configured LBFD-002017 /
value. NO NO No TDLBFD-002017
of the DRX Short
Cycle Timer that
applies only to non-
power-saving UEs
whose RFSP
indexes are
contained in the
RFSP index set.
The length of this
timer is expressed
in the number of
short DRX cycles. If
this parameter is
set to 1, the length
of this timer is one
short DRX cycle. If
this parameter is
set to 2, the length
of this timer is two
short DRX cycles.
For details, see
3GPP TS 36.321 LBFD-002017 /
5.7. NO NO No TDLBFD-002017
Indicates the long
DRX cycle for intra-
RAT ANR. If intra-
RAT ANR is
enabled, this
parameter is valid
regardless of
whether DRX is
enabled. If a long
DRX cycle is
configured for ANR
measurement, it is
recommended that
this parameter be
set to a value equal
to or greater than
256 ms to ensure
that the UE can
successfully obtain
the CGI of a cell.
However, if this
parameter is set to
a large value, the
delay of obtaining
the CGI is large,
and therefore the
system delay LBFD-002017 /
increases. NO NO No TDLBFD-002017
Indicates the long
DRX cycle for inter-
RAT ANR. If inter-
RAT ANR is
enabled, this
parameter is valid
regardless of
whether DRX is
enabled. If there
are multiple inter-
RAT systems, and
all of them require
inter-RAT ANR
measurements, it is
recommended that
this parameter be
set to the maximum
value of the long
DRX cycle
configured for inter-
RAT ANR
measurements.
Otherwise, the
success rate for
inter-RAT ANR
measurements may LBFD-002017 /
be affected. NO NO No TDLBFD-002017
Indicates the
extended QoS
Class Identifier
(QCI), which is
required by the
operator for user LOFD-00101502 /
differentiation. YES YES No TDLOFD-00101502
Indicates the
service type
corresponding to LOFD-00101502 /
the extended QCI. NO NO No TDLOFD-00101502
Indicates the weight
factor used in the LOFD-00101502
calculation of /TDLOFD-
connection priorities 00101502
during uplink LOFD-00301102 /
scheduling. NO NO No TDLOFD-00301102

factor used in the
calculation of
connection priorities
during downlink LOFD-00101502 /
Indicates the uplink LOFD-00101502 /

minimum TDLOFD-00101502
guaranteed bit rate LOFD-00301102 /
of the non-GBR TDLOFD-00301102
service. NO NO No LOFD-00301103
LOFD-00101502 /
TDLOFD-00101502
LOFD-00301101 /
downlink minimum LOFD-00301103 /
guaranteed bit rate TDLOFD-00301103
of the non-GBR LOFD-003016 /
Indicates the pre-

allocation weight.
The pre-allocation
weight of a UE is
the pre-allocation
weight of services
carried by the
highest-priority
logical channel. If
services carried by
highest-priority
logical channels
have different pre-
allocation weights,
the UE takes the
highest pre-
allocation weight.
When resources
are insufficient, pre-
allocation weights
affect the pre-
allocation
probabilities of
users. The pre-
allocation
probability has a
with the pre-
allocation weight.
QCI-specific. NO NO No TDLOFD-00101502
Indicates the group LOFD-001019 /
ID of the TDLOFD-001019
parameters related LOFD-001020 /
to the inter-RAT TDLOFD-001020
handover with the LOFD-001021 /
extended QCI. NO NO No TDLOFD-001021
Indicates the
prioritized bit rate of
the logical channel.
The UE scheduler
guarantees
prioritized bit rates
of logical channels
in descending order
of logical channel
priority. For details,
36.321. NO NO No TDLOFD-00101502
Indicates the
priority of the logical
channel. The UE
scheduler
guarantees
of logical channels
in descending order
of logical channel
priority. Resources
are allocated in
descending order of
logical channel
priority after the
of all services are
guaranteed. For
details, see 3GPP LOFD-00101502 /
TS 36.321. NO NO No TDLOFD-00101502
Indicates the ID of
an RLC/PDCP LBFD-002008 /
parameter group. NO NO No TDLBFD-002008
Indicates whether
the extended QCI is
specific to free
users or paid users. NO NO No TDLOFD-00101502
LOFD-00301101 /
TDLOFD-00301101
LOFD-00301102 /
TDLOFD-00301102
LOFD-00301103 /
Indicates whether TDLOFD-00301103
to enable flow LOFD-003016 /
control for the QCI. NO NO No TDLOFD-003016
LOFD-001022 /
TDLOFD-001022
LOFD-001023 /
TDLOFD-001023
Indicates the group LOFD-001019 /
ID of the TDLOFD-001019
parameters related LOFD-001020 /
to the inter-RAT TDLOFD-001020
handover with a LOFD-001021 /
specific QCI. YES YES No TDLOFD-001021
of handovers to
UTRAN.
PS_HO: indicates
whether to allow PS
handovers to
UTRAN.
SRVCC: indicates
whether to allow
transfers to UTRAN
in SRVCC mode.
REDIRECTION: LOFD-001022 /
indicates whether to TDLOFD-001022
allow redirection to LOFD-001019 /

used to enable or
disable the single
radio voice call
continuity (SRVCC)
handover to
GERAN GSM.
If this switch is set
to On, the UE can
perform the SRVCC
handover to the
GERAN GSM cell.
If this switch is set
to Off, the UE
cannot perform the LOFD-001023 /
SRVCC handover TDLOFD-001023
to the GERAN GSM LOFD-001020 /
cell. NO NO No TDLOFD-001020
NACC_HO:
Indicates whether
NACC handovers to
neighboring
GPRS/EDGE cells
are allowed. This
switch will be
removed in the later
versions. In this
of this switch is still
synchronized
between the M2000
and the eNodeB,
but it is no longer
used internally.
Therefore, avoid
using this
parameter.
CCO_HO: Indicates
whether CCO
handovers to
neighboring
GPRS/EDGE cells
are allowed.
SRVCC: Indicates
whether SRVCC
handovers to
neighboring
GPRS/EDGE cells
are allowed.
REDIRECTION:
Indicates whether
redirections to
neighboring TDLOFD-001023
GPRS/EDGE cells LOFD-001020 /
are allowed. NO NO No TDLOFD-001020

used to enable or
disable QCI-specific
SRVCC to
CDMA2000 1xRTT.
If this switch is
turned on, UEs can
perform SRVCC to
CDMA2000 1xRTT
cells.
If this switch is
turned off, UEs
cannot perform
SRVCC to
CDMA2000 1xRTT
cells. NO NO No None
of handovers to
CDMA2000 HRPD
networks.
NON_OPT_HO:
Indicates whether
to allow non-
optimized
handovers to
neighboring
CDMA2000 HRPD
cells.
OPT_HO:
Indicates whether
to allow optimized
handovers to
neighboring
CDMA2000 HRPD LOFD-001021 /
cells. NO NO No TDLOFD-001021
LOFD-001019 /
TDLOFD-001019
LOFD-001020 /
TDLOFD-001020
LOFD-001021 /
TDLOFD-001021
to permit or forbid TDLOFD-001022
the inter-RAT TDLOFD-001023
handover under the TDLOFD-001033
QCI. NO NO No TDLOFD-001034
Indicates whether
to allow the fast
ANR under the
QCI. The function
specified by this
parameter is an
extended function
and is reserved.
The current version
does not support
Indicates the index
mapped to the MCS
offset for channel
quality indicators
(CQIs) transmitted
with data on
PUSCH. For
details, see 3GPP
TS 36.213. Some
values are
reserved, for
example, values 0
and 1 are reserved
in 3GPP TS 36.213
Release 9. When
this parameter is
set to a reserved
value, a UE initiates
an RRC connection
reestablishment or
fails to access the LBFD-002025 /
network. NO NO No TDLBFD-002025
Indicates the index

mapped to the MCS
offset for rank
indications (RIs)
transmitted with
data on PUSCH.
For details, see
3GPP TS 36.213.
Some values are
reserved, for
example, values 13,
14, and 15 are
reserved in 3GPP
TS 36.213 Release
9. When this
parameter is set to
a reserved value, a
UE initiates an RRC
connection
reestablishment or
Indicates the index
mapped to the MCS
offset for
acknowledgments
(ACKs) transmitted
with data on
PUSCH. For
details, see 3GPP
TS 36.213. Some
values are
reserved, for
example, value 15
is reserved in 3GPP
TS 36.213 Release
9. When this
parameter is set to
a reserved value, a
UE initiates an RRC
connection
reestablishment or
Indicates the ID of
the RLC/PDCP LBFD-002008 /
parameter group. YES YES No TDLBFD-002008
of the PDCP LBFD-002008 /
discard timer. NO NO No TDLBFD-002008
Indicates the RLC

transmission mode.
Only the AM and
UM modes are LBFD-002008 /
available. NO NO No TDLBFD-002008
Indicates the UE-
specific maximum
number of RLC
ARQ
retransmissions,
namely the
maximum number
of AM PDU
retransmissions.
When the number
of retransmissions
reaches the value
of this parameter,
RRC connection re-
establishment is LBFD-002008 /
initiated. NO NO No TDLBFD-002008
Indicates the
eNodeB-specific
maximum number
of RLC ARQ
retransmissions,
namely the
maximum number
of AM PDU
retransmissions.
When the number
of retransmissions
reaches the value
of this parameter,
RRC connection re-
establishment is LBFD-002008 /
initiated. NO NO No TDLBFD-002008
Indicates the UE-
specific data
volume threshold of
PDUs to trigger
polling. When the
transmitted data
volume reaches the
value of this
parameter, the Poll
flag is set in the LBFD-002008 /
PDU header. NO NO No TDLBFD-002008
Indicates the
eNodeB-specific
data volume
threshold of PDUs
to trigger polling.
When the
transmitted data
volume reaches the
value of this
parameter, the Poll
Indicates the UE-
specific number of
PDUs to trigger
polling. When the
transmitted number
of PDUs reaches
the value of this
parameter, the Poll
Indicates the
eNodeB-specific
number of PDUs to
trigger polling.
When the
transmitted number
of PDUs reaches
the value of this
parameter, the Poll
of the Polling PDU
retransmission LBFD-002008 /
timer for the UE. NO NO No TDLBFD-002008
of the Polling PDU
retransmission
timer for the LBFD-002008 /
eNodeB. NO NO No TDLBFD-002008
of the UE-specific
timer for prohibiting
status reporting
from the receiver in LBFD-002008 /
AM. NO NO No TDLBFD-002008
of the eNodeB-
specific timer for
prohibiting status
reporting from the LBFD-002008 /
receiver in AM. NO NO No TDLBFD-002008
of the UE-specific
timer for reordering
at the receiver in LBFD-002008 /
AM. NO NO No TDLBFD-002008
of the eNodeB-
specific timer for
reordering at the LBFD-002008 /
receiver in AM. NO NO No TDLBFD-002008

of a PDCP
sequence number
of a UL DRB in RLC LBFD-002008 /
UM. NO NO No TDLBFD-002008
of a UL RLC
sequence number
in UM. The length is
permanently 10 bits LBFD-002008 /
in AM. NO NO No TDLBFD-002008

of a DL RLC
sequence number
in UM. The length is
permanently 10 bits LBFD-002008 /
in AM. NO NO No TDLBFD-002008
of the UE-specific
timer for reordering
at the receiver in LBFD-002008 /
UM. NO NO No TDLBFD-002008
of the eNodeB-
specific timer for
reordering at the LBFD-002008 /
receiver in UM. NO NO No TDLBFD-002008
Indicates whether a
PDCP status report
is required upon LBFD-002008 /
handover in AM. NO NO No TDLBFD-002008
Indicates the QoS
Class Identifier
(QCI) of an EPS
bearer. Different
QCIs represent
different QoS
specifications such
as the packet delay
budget, packet
error loss rate, and
resource type
(whether the
service is a GBR
service or not). For
details, see Table
6.1.7 in 3GPP TS LOFD-00101502 /
23.203. YES YES No TDLOFD-00101502

factor used in the
calculation of LOFD-00101502 /
connection priorities TDLOFD-00101502
during uplink LOFD-00301102 /

factor used in the
calculation of
connection priorities
during downlink LOFD-00101502 /
minimum
guaranteed bit rate LOFD-00101502 /
of the non-GBR TDLOFD-00101502
service. NO NO No LOFD-00301103
Indicates the
downlink minimum LOFD-00101502 /
guaranteed bit rate TDLOFD-00101502
of the non-GBR LOFD-003016 /
Indicates the pre-
allocation weight.
The pre-allocation
weight of a UE is
the pre-allocation
weight of services
carried by the
highest-priority
logical channel. If
services carried by
highest-priority
logical channels
have different pre-
allocation weights,
the UE takes the
highest pre-
allocation weight.
When resources
are insufficient, pre-
allocation weights
affect the pre-
allocation
probabilities of
users. The pre-
allocation
probability has a
with the pre-
allocation weight.
QCI-specific. NO NO No TDLOFD-00101502
LOFD-001019 /
TDLOFD-001019
parameter group TDLOFD-001020
related to inter-RAT LOFD-001021 /
Indicates the ID of
an RLC/PDCP LOFD-00101502 /
parameter group. NO NO No TDLOFD-00101502
Indicates the
prioritized bit rate of
the logical channel.
The UE scheduler
guarantees
of logical channels
in descending order
of logical channel
priority. For details,
36.321. NO NO No TDLOFD-00101502
Indicates the
priority of the logical
channel. The UE
scheduler
guarantees
of logical channels
in descending order
of logical channel
priority. Resources
are allocated in
descending order of
logical channel
priority after the
of all services are
guaranteed. For
LOFD-00301101 /
TDLOFD-00301101
LOFD-00301102 /
TDLOFD-00301102
LOFD-00301103 /
to enable flow LOFD-003016 /
control for the QCI. NO NO No TDLOFD-003016
Indicates the QoS

class identifier
(QCI) of an evolved
packet system
(EPS) bearer.
Different QCIs
indicate different
QoS requirements,
such as the packet
delay budget,
packet error loss
rate, and resource
type. For details,
see Table 6.1.7 in
Indicates reserved
32-bit switch
parameter 0 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
32-bit switch
parameter 1 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
32-bit switch
parameter 2 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 2 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 3 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 4 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 5 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 6 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 7 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 8 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 9 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates the
default Doppler shift
level. This is the
default parameter
used when Doppler
shift measurement
is not required. This
parameter is
unavailable in this
version. NO NO No None
beamforming and
MIMO (BFMIMO)
for a multi-antenna
eNodeB. The
values are
described as
follows:
NO_ADAPTIVE: A
fixed BFMIMO
transmission mode
is used. That is,
transition between
BFMIMO
transmission modes
is not supported.
TxD_BF_ADAPTIV
E: The transmission
mode changes
adaptively between
TM2 and TM7 or
between TM2 and
TM8, depending on
the protocol release
with which UEs
comply.
MIMO_BF_ADAPTI
VE: The
transmission mode
changes adaptively
between TM2, TM3,
and TM7 or
between TM2, TM3,
and TM8, TDLOFD-001001
depending on the TDLOFD-001003
protocol release TDLOFD-001060
with which UEs TDLOFD-001049
comply. NO NO No TDLOFD-001061
Indicates the fixed
beamforming and
MIMO (BFMIMO)
transmission mode
configured by a
multi-antenna
eNodeB for UEs.
This parameter is
valid only when
BfMimoAdaptiveSwi
tch is set to
NO_ADAPTIVE.
There are five
values. TM2:
Transmission mode
2 is always used for
UEs. TM3:
Transmission mode
UEs. TM7:
Transmission mode
UEs. TM8:
Transmission mode
8 is always used for TDLOFD-001001
UEs. TM4: TDLOFD-001003
Transmission mode TDLOFD-001060
4 is always used for TDLOFD-001049
Indicates whether
CQI reporting
period adaptation. If
this parameter is
set to ON, the CQI
period adaptively
changes based on
the air interface
load of the cell. If
this parameter is
set to OFF, the CQI
period is the
specified by the
UserCqiPeriodCfg LBFD-002025 /
parameter. This TDLBFD-002025
only for FDD cells. NO NO No TDLOFD-00101502
Indicates the fixed
CQI period. A fixed
CQI period is used
when CQI period
adaptation is
disabled. If the
UserCqiPeriodCfg
parameter is set to
32 ms, the eNodeB
automatically
changes the value
to 20 ms. If the
UserCqiPeriodCfg
parameter is set to
64 ms, the eNodeB
automatically
changes the value
to 40 ms. If the
UserCqiPeriodCfg
parameter is set to
128 ms, the
eNodeB
automatically
changes the value LBFD-002025 /
to 80 ms. This TDLBFD-002025
only for FDD cells. NO NO No TDLOFD-00101502
Indicates whether
CQI and Ack or
Nack can be
concurrently sent
over the PUCCH.
For details, see the
contents related to
PUCCH format in
3GPP TS36.213.
When this
parameter is set to
OFF, the value of
simultaneousAckNa
ckAndCQI becomes
False, that is, CQI
and Ack or Nack
cannot be sent
simultaneously over
the PUCCH. When
this parameter is
set to ON, the value
of
simultaneousAckNa
ckAndCQI becomes
True, that is, CQI
and Ack or Nack LBFD-001006 /
can be sent TDLBFD-001006
simultaneously over LOFD-00101501 /
the PUCCH. NO NO No TDLOFD-00101501
for a multi-antenna
eNodeB. The
values are
described as
follows:
NO_ADAPTIVE: A
fixed MIMO
transmission mode
is used. That is,
transition between
MIMO transmission
modes is not
supported.
OL_ADAPTIVE:
open-loop adaptive
MIMO transmission
mode. UEs report
RANK and CQI
values but do not
report PMI values
to the eNodeB.
CL_ADAPTIVE:
closed-loop
adaptive MIMO
transmission mode.
UEs report RANK,
CQI, and PMI
values to the
eNodeB.
OC_ADAPTIVE:
UEs switch
between the open- LOFD-001001 /
loop and closed- TDLOFD-001001
loop adaptive LOFD-001003 /
MIMO transmission TDLOFD-001003
modes LOFD-001060 /
automatically. NO NO No TDLOFD-001060
Indicates the fixed
MIMO mode for a
multi-antenna
eNodeB. This
parameter is valid
only when
MimoAdaptiveSwitc
h is set to
NO_ADAPTIVE.
There are four
values.
TM2: Transmission
mode 2 is applied
to UEs.
TM3: Transmission
mode 3 is applied
to UEs.
TM4: Transmission LOFD-001001 /
mode 4 is applied TDLOFD-001001
to UEs. LOFD-001003 /
TM6: Transmission TDLOFD-001003
mode 6 is applied LOFD-001060 /
to UEs. NO NO No TDLOFD-001060
initial network
access.
set to TM2(TM2),
the MIMO type
used during initial
network access is
TM2.
set to
ADAPTIVE(ADAPTI
VE), the MIMO type
used during initial
network access is
determined by the
MimoAdaptiveSwitc
h and
FixedMimoMode
settings. If
MimoAdaptiveSwitc
h is set to
NO_ADAPTIVE,
the initial MIMO
type is determined
by the
FixedMimoMode
parameter setting. If
MimoAdaptiveSwitc
h is set to
OL_ADAPTIVE, the
initial MIMO type is
TM3. If LOFD-001001 /
MimoAdaptiveSwitc TDLOFD-001001
h is set to LOFD-001003 /
CL_ADAPTIVE, the TDLOFD-001003
initial MIMO type is LOFD-001060 /
TM4. NO NO No TDLOFD-001060
Indicates whether
SRS period
adaptation. If this
parameter is set to
ON, the SRS period
adaptively changes
based on the SRS
algorithm. If this
parameter is set to
OFF, the SRS
period is the
specified by the
UserSrsPeriodCfg
parameter.If the
parameter
TddSrsCfgMode is
set to
ACCESS_FIRST or
EXPERIENCE_EN
HANCED,this
parameter setting is LBFD-002003 /
invalid. NO NO No TDLBFD-002003
Indicates the fixed

SRS period. A fixed
SRS period is used
when SRS period
adaptation is LBFD-002003 /
disabled. NO NO No TDLBFD-002003
Indicates the QoS
class identifier
(QCI).
QCI 1 indicates
voice services.
QCI 2 indicates
video (live
streaming) services.
QCI 3 indicates
real-time gaming
services.
QCI 4 indicates
video (buffered
streaming) services.
QCI 5 indicates IMS
signaling.
QCI 7 indicates
voice, video, and
interactive gaming
services.
QCIs 6, 8, and 9
indicate video
services and TCP-
based services. YES YES No None
of the timer for
periodic
transmission of
buffer status reports
(BSRs).
BSRs are sent
periodically or as
triggered by events.
Periodic
transmission of
BSRs uses the
timer specified by
this parameter.
When the timer
expires, a BSR is
sent.
After the BSR is
sent, the timer is
restarted. NO NO No None

of the BSR (Buffer
Status Report)
retransmission
timer. This timer is
started after a BSR
is sent. NO NO No None
Indicates the
measurement gap
pattern.
The eNodeB
defines
measurement gaps
for UEs in
connected mode.
During the
measurement gaps,
a UE measures the
signal quality of the
cells on a specific
frequency. LBFD-00201802 /
There are two gap TDLBFD-00201802
patterns: pattern 1 LOFD-001019 /
and pattern 2. In TDLOFD-001019
pattern 1, the gap LOFD-001020 /
width is 6 ms and TDLOFD-001020
the repetition period LOFD-001021 /
is 40 ms. In pattern TDLOFD-001021
2, the gap width is 6 TDLBFD-002018
ms and the TDLBFD-00201804
repetition period is TDLBFD-00201805
80 ms. For details, TDLOFD-001022
see 3GPP TS TDLOFD-001023
36.331. Pattern 1 TDLOFD-001033
and pattern 2 TDLOFD-001034
correspond to Gap TDLOFD-001035
Pattern Id 0 and TDLOFD-001043
Gap Pattern Id 1 in TDLOFD-001072
3GPP TS 36.331, TDLOFD-001046
Indicates the upper-
layer filtering
coefficient for
RSRP
measurements on
E-UTRAN.
A larger value of
this parameter
indicates a stronger
smoothing effect
and higher LBFD-00201801 /
resistance to fast TDLBFD-00201801
fading, but it may LBFD-00201802 /
weaken the tracing TDLBFD-00201802
capability towards LBFD-00201804 /
varying signals. For TDLBFD-00201804
layer filtering
coefficient for
RSRQ
measurements on
E-UTRAN.
A larger value of
this parameter
smoothing effect
and higher LBFD-00201801 /
resistance to fast TDLBFD-00201801
fading, but it may LBFD-00201802 /
weaken the tracing TDLBFD-00201802
capability towards LBFD-00201804 /
varying signals. For TDLBFD-00201804
Indicates the L3
used for the
measurement
quantity in inter-
RAT measurements
of GERAN.
A great value of this
parameter indicates
a strong smoothing
effect and a high
anti-fast-fading
capability, but a low LOFD-001020 /
signal change TDLOFD-001020
tracing capability. TDLOFD-001023
For details, see TDLOFD-001034
LBFD-00201801 /
TDLBFD-00201801
LBFD-00201802 /
TDLBFD-00201802
LOFD-001019 /
TDLOFD-001019
LOFD-001020 /
TDLOFD-001020
LOFD-001021
TDLBFD-002018
TDLBFD-00201804
TDLBFD-00201805
TDLOFD-001022
TDLOFD-001023
the measurement TDLOFD-001072
threshold needs to TDLOFD-001046
be set. NO NO No TDLOFD-001073
Indicates the
threshold below
which
measurements on
neighboring cells
are started. If the
serving cell
exceeds this LBFD-00201801 /
threshold, the UE is TDLBFD-00201801
not required to LBFD-00201802 /
perform intra- TDLBFD-00201802
frequency, inter- LBFD-00201804 /
frequency, or inter- TDLBFD-00201804
RAT LBFD-00201805 /
measurements, TDLBFD-00201805
leading to reduced LOFD-001019 /
power TDLOFD-001019
consumption. The LOFD-001020 /
value -141 does not TDLOFD-001020
take effect, and is LOFD-001021
reserved for forward TDLBFD-002018
compatibility. If this TDLBFD-001022
parameter is set to TDLBFD-001023
-141, the value -140 TDLBFD-001043
is used as the TDLBFD-001072
threshold in TDLBFD-001046
LBFD-00201801 /
TDLBFD-00201801
LBFD-00201802 /
TDLBFD-00201802
LOFD-001019 /
TDLOFD-001019
LOFD-001020 /
TDLOFD-001020
TDLBFD-002018
mobility-based cell TDLBFD-00201805
handover TDLBFD-001043
measurement TDLBFD-001072
parameters need to TDLBFD-001046
be set. NO NO No TDLBFD-001073
Indicates the cycle
during which
evaluations of the
UE medium and
high mobility states
in
RRC_CONNECTE
D mode are
performed. It is one
of the key
parameters in
deciding on a UE's
mobility state. If this LBFD-00201801 /
a small value, LBFD-00201802 /
switchings among TDLBFD-00201802
mobility states may LOFD-001019 /
be frequent and the TDLOFD-001019
decision precision LOFD-001020 /
may be relatively TDLOFD-001020
low. If this TDLBFD-002018
parameter is set to LBFD-00201804 /
a large value, TDLBFD-00201804
switchings among LBFD-00201805 /
mobility states are TDLBFD-00201805
less frequent and TDLBFD-001043
the decision TDLBFD-001072
precision is TDLBFD-001046
relatively high. NO NO No TDLBFD-001073
Indicates the cycle
during which
evaluations of the
UE normal mobility
state in
RRC_CONNECTE
D mode are
performed. It is one
of the key
parameters in
deciding on a UE's
mobility state. If this LBFD-00201801 /
a small value, LBFD-00201802 /
switchings among TDLBFD-00201802
mobility states may LOFD-001019 /
be frequent and the TDLOFD-001019
decision precision LOFD-001020 /
may be relatively TDLOFD-001020
low. If this TDLBFD-002018
a large value, TDLBFD-00201804
switchings among LBFD-00201805 /
mobility states are TDLBFD-00201805
less frequent and TDLBFD-001043
the decision TDLBFD-001072
precision is TDLBFD-001046
relatively high. NO NO No TDLBFD-001073
Indicates the
handover number
threshold used in
the UE medium
mobility state
evaluation. If the
number of LBFD-00201801 /
handovers TDLBFD-00201801
performed during a LBFD-00201802 /
period of time TDLBFD-00201802
specified by the LOFD-001019 /
TcrMaxConnMode TDLOFD-001019
parameter exceeds LOFD-001020 /
the value of this TDLOFD-001020
parameter, the UE TDLBFD-002018
is considered to be TDLBFD-00201804
in medium mobility TDLBFD-00201805
state and its TDLBFD-001043
handover-related TDLBFD-001072
parameters are TDLBFD-001046
adjusted. NO NO No TDLBFD-001073
Indicates the
handover number
threshold used in
the UE high mobility LBFD-00201801 /
state evaluation. If TDLBFD-00201801
the number of LBFD-00201802 /
handovers TDLBFD-00201802
performed during a LOFD-001019 /
period of time TDLOFD-001019
specified by the LOFD-001020 /
TcrMaxConnMode TDLOFD-001020
parameter exceeds TDLBFD-002018
parameter, the UE TDLBFD-00201804
is considered to be LBFD-00201805 /
in high mobility TDLBFD-00201805
state and its TDLBFD-001043
handover-related TDLBFD-001072
parameters are TDLBFD-001046
LBFD-00201801 /
TDLBFD-00201801
scaling factor for TDLBFD-00201802
the time-to-trigger LOFD-001019 /
defined for medium- TDLOFD-001019
mobility UEs. For a LOFD-001020 /
UE in medium TDLOFD-001020
mobility, the time-to- TDLBFD-002018
trigger used in TDLBFD-00201804
event evaluation is TDLBFD-00201805
multiplied by this TDLBFD-001043
scaling factor, to TDLBFD-001072
facilitate triggering TDLBFD-001046
of the handover. NO NO No TDLBFD-001073
LBFD-00201801 /
TDLBFD-00201801
scaling factor for TDLBFD-00201802
the time-to-trigger LOFD-001019 /
defined for high- TDLOFD-001019
mobility UEs. For a LOFD-001020 /
UE in high mobility, TDLOFD-001020
the time-to-trigger TDLBFD-002018
used in event TDLBFD-00201804
evaluation is TDLBFD-00201805
multiplied by this TDLBFD-001043
scaling factor, to TDLBFD-001072
facilitate triggering TDLBFD-001046
of the handover. NO NO No TDLBFD-001073
Indicates the
for RSCP
measurements on
UTRAN.
A larger value of
this parameter
smoothing effect
and higher
resistance to fast
fading, but it may
weaken the tracing
capability towards LOFD-001019 /
varying signals. For TDLOFD-001019
details, see 3GPP TDLOFD-001022
layer filtering
coefficient for Ec/No
measurements on
UTRAN.
A larger value of
this parameter
smoothing effect
and higher
resistance to fast
fading, but it may
weaken the tracing
capability towards LOFD-001019 /
varying signals. For TDLOFD-001019
maximum number TDLOFD-001090
of cells to be LOFD-001019 /
included in the TDLOFD-001019
report after an inter- TDLOFD-001020
RAT handover LOFD-001021 /
event or a periodic TDLOFD-001021
inter-RAT TDLBFD-001022
measurement for TDLBFD-001023
ANR purposes is TDLBFD-001043
triggered. For TDLBFD-001072
details, see 3GPP TDLBFD-001046
Indicates the
number of
periodical
reports to be sent TDLOFD-001090
after an inter-RAT LOFD-001019 /
handover event is TDLOFD-001019
triggered. It is used LOFD-001020 /
to prevent the TDLOFD-001020
impact of LOFD-001021 /
report loss and TDLBFD-001022
internal processing TDLBFD-001023
failure on the TDLBFD-001043
handover. For TDLBFD-001072
Indicates the
interval at which
periodic LOFD-001020 /
reports are sent to LOFD-001021
the eNodeB after TDLOFD-001023
the event for inter- TDLOFD-001033
RAT handover to TDLOFD-001034
GERAN is TDLOFD-001035
triggered. TDLOFD-001019
Indicates the
quantity to be
included in the
measurements for
handovers to
UTRAN. This
parameter is
dedicated to
UTRAN FDD.
The RSCP values
are relatively stable,
while the Ec/No
values may vary
with the network
load. The value
BOTH applies only
to UEs complying
with 3GPP Release
10. For UEs
complying with
3GPP Release 8 or
9, the value BOTH
takes the same
effect as the value LOFD-001019 /
RSCP. For details, TDLOFD-001019
see 3GPP TS TDLOFD-001022
Indicates the
interval at which
periodical
measurement
reports are sent
after the event for
the handover to LOFD-001019 /
UTRAN is triggered. TDLOFD-001019
Indicates the
measurement
quantity required for
the inter-RAT
CDMA2000 1xRTT. TDLOFD-001090
Indicates the
interval at which
periodic
measurement
reports are sent to
the eNodeB after
the event for inter-
RAT handover to
CDMA2000 1xRTT LOFD-001090 /
is triggered. TDLOFD-001090
Indicates the
measurement
quantity required for
the inter-RAT
handover to
CDMA2000 HRPD.
Indicates the
interval at which
periodic
measurement
reports are sent to
the eNodeB after
the event for inter-
RAT handover to
CDMA2000 HRPD
is triggered.
Indicates the
triggering quantity
for the inter-RAT
measurement event
A1 or A2 report.
The quantity can be
RSRP, RSRQ, or
both RSRP and
RSRQ. The
measured RSRP
values are stable,
varying little with
the load, and
therefore there is
little signal
fluctuation. The
values vary with the TDLOFD-001019
load and are likely LOFD-001020 /
to reflect the signal TDLOFD-001020
quality of the cell in LOFD-001021 /
real time. For TDLOFD-001021
Indicates the type

of the inter-RAT
handover event. LOFD-001019 /
The event type can TDLOFD-001019
be B1 or B2. This LOFD-001020 /
parameter applies TDLOFD-001020
only to coverage- LOFD-001021 /
based handovers. TDLOFD-001021
Indicates the timer

for measurements
on CDMA2000 LOFD-001090 /
1xRTT cells. NO NO No TDLOFD-001090
Indicates the
number of
CDMA2000 1xRTT
cells whose
reference signal
strength is used to
calculate the target
reference signal LOFD-001090 /
strength. NO NO No TDLOFD-001090
Indicates the mode
of selecting a LOFD-001111
CDMA2000 HRPD TDLOFD-001090
Indicates the mode

of selecting a LOFD-001035 /
CDMA2000 1xRTT TDLOFD-001035
frequency. NO NO No LOFD-001091
Indicates whether
eCSFB is based on LOFD-001090 /
Indicates the
measurement mode LOFD-001090 /
for eCSFB. NO NO No TDLOFD-001090
Indicates the mode LOFD-001035 /

of selecting a sector TDLOFD-001035
ID during eCSFB. NO NO No TDLOFD-001090
Indicates the
maximum number
of UTRAN cell
system information
messages that can
be transmitted
during a flash LOFD-001019 /
redirection TDLOFD-001019
procedure. NO NO No TDLOFD-001052
Indicates the
maximum number
of GERAN cell
system information
messages that can
be transmitted
during a flash LOFD-001020 /
Indicates the
maximum number
of GERAN cell
system information
messages that can
be transmitted
during a CSFB
emergency
redirection LOFD-001034 /
Indicates the
maximum number
of UTRAN cell
system information
messages that can
be transmitted
during a CSFB
emergency LOFD-001033 /
Indicates the
maximum number
of cells to be
included in the LBFD-00201801 /
report after an intra- LBFD-00201802 /
RAT inter-frequency TDLBFD-00201802
or intra-RAT intra- LBFD-00201804 /
frequency TDLBFD-00201804
measurement event LBFD-00201805 /
for handover TDLBFD-00201805
purposes or a TDLBFD-002018
periodic intra-RAT TDLBFD-001022
measurement for TDLBFD-001023
ANR purposes is TDLBFD-001033
triggered. For TDLBFD-001034
Indicates the
number of
periodical
measurement
reports to be sent LBFD-00201801 /
after an event for TDLBFD-00201801
the intra- or inter- LBFD-00201802 /
within the E-UTRAN LBFD-00201804 /
is triggered. TDLBFD-00201801
It is used to prevent LBFD-00201804 /
the impact of TDLBFD-00201801
report loss and TDLBFD-001022
internal processing TDLBFD-001023
failure on the TDLBFD-001033
handover. For TDLBFD-001034
Indicates the
quantity used to
evaluate the
triggering condition
for the intra-
frequency handover
event. The quantity
can be RSRP or
RSRQ.
The measured
RSRP values are
stable, varying little
with the load, and
therefore there is
little signal
fluctuation. The
measured RSRQ
values vary with the
load and are likely
to reflect the signal
quality of the cell in
real time.
can be RSRP,
RSRQ, or both.
The measured
RSRP values are
with the load, and
therefore there is
little signal
fluctuation. The
measured RSRQ
load and are likely
real time. Even
when this
parameter is set to
BOTH, the eNodeB
triggers a handover
based on the
setting of the
IntraFreqHoA3Trig
Quan
parameter.The
value of this
parameter is also
used as the
quantity to be
included in the
measurement
report between A3-
related inter-
frequency
measurement
reports.
Indicates the
interval between
periodic
measurement
reports that are
sent after an intra-
frequency handover
is triggered. The
value of this
parameter is also
used as the interval
between A3-related
inter-frequency
reports. TDLBFD-00201801
Indicates the
quantity to be
included in the
measurement
report for the inter-
frequency handover
event. The quantity
can be RSRP,
RSRQ, or both. The
measured RSRP
values are stable,
varying little with
the load, and
therefore there is
little signal
fluctuation. The
measured RSRQ
load and are likely LBFD-00201802 /
to reflect the signal TDLBFD-00201802
quality of the cell in LBFD-00201804 /
real time. For TDLBFD-00201804
Indicates the
interval at which
periodical
measurement
reports are sent LBFD-00201802 /
after an inter- TDLBFD-00201802
frequency handover LBFD-00201804 /
event is triggered. TDLBFD-00201804
Indicates the
quantity used in the
evaluation for inter-
frequency
measurement event
A1 or A2. The
quantity can be
RSRP, RSRQ, or
both. The measured
RSRP values are
with the load, and
therefore there is
little signal
fluctuation. The
measured RSRQ
load and are likely
real time. For
Indicates the
triggering quantity
for frequency-
priority-based inter-
frequency
measurement
events A1 and A2.
The quantity can be
either RSRP or
RSRQ, or both. The
measured RSRP
values are stable,
varying little with
the load, and
therefore there is
little signal
fluctuation. The
measured RSRQ
load and are likely
real time. For
details, see 3GPP
TS 36.331. NO NO No None
Indicates the
triggering quantity LBFD-00201802 /
for frequency- TDLBFD-00201802
priority- and load- LBFD-00201804 /
based inter- TDLBFD-00201804
frequency handover LBFD-00201805 /
event A4. NO NO No TDLBFD-00201805
Indicates the local
ID of the cell. It
the evaluation of
whether to trigger
event B1. When
detecting that the
least one UTRAN
cell meets the
entering condition,
the UE does not
send a
measurement
report to the
eNodeB
immediately.
Instead, the UE
sends a report only
when the signal
meets the entering
parameter helps
decrease the
number of
occasionally
triggered event
reports, the
average number of
handovers, and the
number of wrong
handovers, and
thus helps to
prevent
unnecessary
handovers. For
the evaluation of
whether to trigger
event B1. When
detecting that the
least one GERAN
cell meets the
entering condition,
the UE does not
send a
measurement
report to the
eNodeB
immediately.
Instead, the UE
sends a report only
when the signal
meets the entering
parameter helps
decrease the
number of
occasionally
triggered event
reports, the
average number of
handovers, and the
number of wrong
handovers, and
thus helps to
prevent
unnecessary
handovers. For
UEs and used in
the evaluation of
whether to trigger
event B1. When
detecting that the
least one
CDMA2000 cell
meets the entering
condition, the UE
does not send a
measurement
report to the
eNodeB
immediately.
Instead, the UE
sends a report only
when the signal
meets the entering
parameter helps
reduce the number
of occasionally
triggered event
reports, the
average number of
handovers, and the
number of wrong
handovers, and
hence helps
prevent
unnecessary
handovers. For LOFD-001090 /
Indicates the RSCP
threshold for event
B1, which is used in
CS fallback to
UTRAN. When CS
fallback to UTRAN
is applicable, this
parameter is set for
UEs and used in
the evaluation
about whether to
trigger event B1.
This parameter
indicates the RSCP
requirement for the
UTRAN cells to be
included in the
measurement
report. A UE sends
a measurement
report related to
event B1 to the
eNodeB when the
RSCP in at least
one UTRAN cell
exceeds this
threshold and other
triggering
conditions are met.
the evaluation
about whether to
trigger event B1.
This parameter
indicates the Ec/N0
requirement for the
UTRAN cells to be
included in the
measurement
report. A UE sends
a measurement
report related to
event B1 to the
eNodeB when the
Ec/N0 in at least
one UTRAN cell
exceeds this
threshold and other
triggering
conditions are met.
For a cell with large
signal fading
variance, set this
parameter to a
large value to
prevent
unnecessary
handovers. For a
cell with small
signal fading
variance, set this
parameter to a
small value to
ensure timely
handovers. For
Indicates the RSSI

threshold for event
B1 that is used in
CS fallback to
GERAN. A UE
sends a
measurement
report related to
event B1 to the
eNodeB when the
RSSI in at least one
GERAN cell
exceeds this
threshold and other
triggering
conditions are met.
Indicates the pilot
strength threshold
related to event B1,
which is used in CS
fallback to
CDMA2000. A UE
sends a
measurement
report related to
event B1 to the
eNodeB when the
pilot strength in at
least one
CDMA2000 cell
exceeds this
threshold and other
triggering
conditions are met. LOFD-001090 /
Indicates the RSRP

threshold for event
A1 associated with
CSFB-triggered
adaptive blind
handovers. This
parameter is set for
a UE as a triggering
condition of event
A1 measurement
related to a CSFB-
triggered adaptive
blind handover. This
parameter specifies
the RSRP threshold
of the local cell
above which a
CSFB-triggered
adaptive blind
handover is
triggered. If the
RSRP value
measured by the
UE exceeds this
threshold, this UE
submits a LOFD-001052 /
report related to LOFD-001053 /
Indicates the timer
governing the
period in which only
CSFB can be
performed . After LOFD-001033 /
the timer expires, TDLOFD-001033
the eNodeB LOFD-001033 /
performs a blind TDLOFD-001034
redirection for the LOFD-001033 /
UE. NO NO No TDLOFD-001090
Indicates the local
ID of the cell. It
Indicates whether
to configure the
access barring LBFD-002009 /
information. NO NO No TDLBFD-002009
emergency call
barring status of
access class 10,
indicating whether
UEs of access class
10 can initiate
emergency calls.
set to
BOOLEAN_TRUE,
UEs of access
classes 0 to 9 or
those without IMSIs
cannot initiate
emergency calls. If
this parameter is
set to
BOOLEAN_FALSE,
UEs of access
classes 0 to 9 and
those without IMSIs
can initiate
emergency calls.
A UE in access
classes 11 to 15
cannot initiate
emergency calls
only when its
access class and
access class 10 are
both barred. If its
access class or
access class 10 is
not barred,
emergency calls
initiated by the UE LBFD-002028 /
are granted access. NO NO No TDLBFD-002028
Indicates whether
to configure the
access barring
information for
mobile-originated LBFD-002009 /
calls. NO NO No TDLBFD-002009
Indicates the
access probability
factor for mobile-
originated calls. A
mobile-originated
call is granted
access if the
random number
generated by the
UE is smaller than
this access
probability factor;
otherwise, the
access request is
rejected. If this
parameter is set to
P00, all mobile-
originated calls
initiated by UEs of
access class 11 to
access class 15 are LBFD-002009 /
granted access. NO NO No TDLBFD-002009
Indicates the
average access
barring duration for
Indicates the
mobile-originated
call barring status
of access class 11,
indicating whether
UEs of access class
11 can initiate
mobile-originated
calls.
set to
BOOLEAN_TRUE,
UEs of access class
11 cannot initiate
mobile-originated
calls. If this
parameter is set to
BOOLEAN_FALSE,
UEs of access class
11 can initiate
Indicates the
mobile-originated
call barring status
of access class 12,
indicating whether
UEs of access class
12 can initiate
mobile-originated
calls.
set to
BOOLEAN_TRUE,
UEs of access class
12 cannot initiate
mobile-originated
calls. If this
parameter is set to
BOOLEAN_FALSE,
UEs of access class
12 can initiate
Indicates the
mobile-originated
call barring status
of access class 13,
indicating whether
UEs of access class
13 can initiate
mobile-originated
calls.
set to
BOOLEAN_TRUE,
UEs of access class
13 cannot initiate
mobile-originated
calls. If this
parameter is set to
BOOLEAN_FALSE,
UEs of access class
13 can initiate
Indicates the
mobile-originated
call barring status
of access class 14,
indicating whether
UEs of access class
14 can initiate
mobile-originated
calls.
set to
BOOLEAN_TRUE,
UEs of access class
14 cannot initiate
mobile-originated
calls. If this
parameter is set to
BOOLEAN_FALSE,
UEs of access class
14 can initiate
Indicates the
mobile-originated
call barring status
of access class 15,
indicating whether
UEs of access class
15 can initiate
mobile-originated
calls.
set to
BOOLEAN_TRUE,
UEs of access class
15 cannot initiate
mobile-originated
calls. If this
parameter is set to
BOOLEAN_FALSE,
UEs of access class
15 can initiate
Indicates whether
to configure the
access barring
information for LBFD-002009 /
signaling. NO NO No TDLBFD-002009
Indicates the
access probability
factor for signaling.
Signaling from a UE
is granted access if
the random number
generated by the
UE is smaller than
this access
probability factor;
otherwise, the
access request is
rejected. If this
parameter is set to
P00, signaling from
UEs of access class
11 to access class
15 is granted LBFD-002009 /
access. NO NO No TDLBFD-002009
Indicates the
average access
barring duration for LBFD-002009 /
Indicates the
signaling barring
status of access
class 11, indicating
whether UEs of
access class 11 can
initiate signaling
access.
set to
BOOLEAN_TRUE,
UEs of access class
11 cannot initiate
signaling access. If
this parameter is
set to
BOOLEAN_FALSE,
UEs of access class
11 can initiate LBFD-002009 /
signaling access. NO NO No TDLBFD-002009
Indicates the
signaling barring
status of access
whether UEs of
access class 12
can initiate
signaling access.
set to
BOOLEAN_TRUE,
UEs of access class
12 cannot initiate
this parameter is
set to
BOOLEAN_FALSE,
UEs of access class
Indicates the
signaling barring
status of access
whether UEs of
access class 13
can initiate
signaling access.
set to
BOOLEAN_TRUE,
UEs of access class
13 cannot initiate
this parameter is
set to
BOOLEAN_FALSE,
UEs of access class
Indicates the
signaling barring
status of access
whether UEs of
access class 14
can initiate
signaling access.
set to
BOOLEAN_TRUE,
UEs of access class
14 cannot initiate
this parameter is
set to
BOOLEAN_FALSE,
UEs of access class
Indicates the
signaling barring
status of access
whether UEs of
access class 15
can initiate
signaling access.
set to
BOOLEAN_TRUE,
UEs of access class
15 cannot initiate
this parameter is
set to
BOOLEAN_FALSE,
UEs of access class
Indicates whether
to configure the
access barring
information for
multimedia
telephony (MMTEL) LBFD-002009 /
voice services. NO NO No TDLBFD-002009
Indicates the
access probability
factor for
multimedia
telephony (MMTEL)
voice services. An
MMTEL voice
service is granted
access if the
random number
generated by the
UE is less than this
access probability
factor; otherwise,
the access request LBFD-002009 /
is barred. NO NO No TDLBFD-002009
Indicates the
average access
barring time of
multimedia
voice services. NO NO No TDLBFD-002009
AC 11 to AC 15 are
granted access.
AC11BARSTATE: If
this option is
selected, the
MMTEL voice
services initiated by
UEs of AC 11 in idle
mode are barred.
AC12BARSTATE: If
this option is
selected, the
MMTEL voice
mode are barred.
AC13BARSTATE: If
this option is
selected, the
MMTEL voice
mode are barred.
AC14BARSTATE: If
this option is
selected, the
MMTEL voice
mode are barred.
AC15BARSTATE: If
this option is
selected, the
MMTEL voice
UEs of AC 15 in idle LBFD-002009 /
mode are barred. NO NO No TDLBFD-002009
Indicates whether
to configure the
access barring
information for
multimedia
video services. NO NO No TDLBFD-002009
Indicates the
access probability
factor for
multimedia
telephony (MMTEL)
video services. An
MMTEL video
service is granted
access if the
random number
generated by the
UE is less than this
access probability
factor; otherwise,
the access request LBFD-002009 /
is barred. NO NO No TDLBFD-002009
Indicates the
average access
barring time of
multimedia
video services. NO NO No TDLBFD-002009
AC 11 to AC 15 are
granted access.
AC11BARSTATE: If
this option is
selected, the
MMTEL video
mode are barred.
AC12BARSTATE: If
this option is
selected, the
MMTEL video
mode are barred.
AC13BARSTATE: If
this option is
selected, the
MMTEL video
mode are barred.
AC14BARSTATE: If
this option is
selected, the
MMTEL video
mode are barred.
AC15BARSTATE: If
this option is
selected, the
MMTEL video
UEs of AC 15 in idle LBFD-002009 /
mode are barred. NO NO No TDLBFD-002009
Indicates the local
ID of the cell. It
Indicates whether
the cell is barred. If
the cell is barred,
the UE cannot
camp on the
serving cell. During
cell reselection, the LOFD-002012 /
serving cell is not TDLOFD-002012
selected as a LBFD-002009 /
candidate cell. NO NO No TDLBFD-002009
access class of the
UE and its serving
PLMN. Details are
described as
follows: (1) A UE of
access class 11 or
15 treats the cell as
a candidate if the
UE is served by its
home PLMN
(HPLMN) or
equivalent home
PLMN (EHPLMN);
(2) A UE of access
class 11 or 15 treats
the cell as a barred
cell if it is not
served by its
HPLMN or
EHPLMN; (3) A UE
of an access class
within the two
ranges of 0-9 and
12-14 treats the cell
as a barred cell. In
this version, the
parameter still
supports setting
synchronization
between the M2000
and the eNodeB,
but is no longer
used internally.
Avoid using this
parameter as it will
be removed from LBFD-002009 /
the later versions. NO NO No TDLBFD-002009
Indicates whether
the cell can initiate
the intra-frequency
cell reselection
when the cell is
barred.
NOT_ALLOWED
means that the UE
cannot initiate the
intra-frequency cell
reselection, and
ALLOWED means LBFD-002009 /
that the UE can TDLBFD-002009
initiate the intra- LBFD-
frequency cell 00201803/TDLBFD
reselection. NO NO No -00201803
common carriers
mode and at least
one of these cells
uses the round
robin mode,
NBSLTEPLMNRou
ndSwitch under the
ANR Under RAN
Sharing Algorithm
Switch parameter
must be turned on
for eNodeBs whose
cells are configured
as neighboring cells
for the local cell.
Otherwise, the local
eNodeB may
experience failures
in handing over
UEs from the local
cell to an ANR-
established
neighboring cell
that is in round
robin mode.If this
parameter is set to
NORMAL_MODE,
the cell broadcasts
PLMN-specific
information in
normal mode. If this
parameter is set to
RR_MODE, the cell
broadcasts PLMN- LOFD-001036 /
specific information TDLOFD-001036
in round robin LBFD-002009 /
LOFD-001036 /
changing period of LBFD-002009 /
cell PLMN. NO NO No TDLBFD-002009
Indicates the start

time for
broadcasting
PLMN-specific
information in round LOFD-001036 /
robin mode. NO NO No TDLOFD-001036
Indicates the local

ID of the cell. It
cell within a base
station. YES YES No None
Indicates the local
tracking area
identity of the cell,
which uniquely
identifies an
operator's record of
tracking area
information within a
cell. This parameter
is used only in the
eNodeB and is
different from the
tracking area LBFD-002009 /
identity configured TDLBFD-002009
in the tracking area LBFD-00201803 /
list on the MME. YES YES No TDLBFD-00201803
Indicates whether
the cell is reserved
for operator use.
set to
CELL_RESERVED
_FOR_OP, the cell
is reserved for
operator use. UEs
of AC11 or AC15 in
their HPLMN or
EHPLMN can
consider this cell as
a candidate cell for
cell selection or
reselection. UEs of
AC11 or AC15
outside their
HPLMN/EHPLMN
and UEs of AC0-
9/AC12-14 consider
this cell as a barred
cell during cell
selection or
reselection.
set to
CELL_NOT_RESE
RVED_FOR_OP,
the cell is not
reserved for
operator use. All
UEs can consider
this cell as a
candidate cell for
cell selection or LBFD-002009 /
reselection. NO NO No TDLBFD-002009
Indicates the
percentage of RBs
occupied by the
operator on the
physical uplink
shared channel
(PUSCH) when
RAN sharing is
enabled at the
eNodeB and the
RAN sharing mode
switch of the cell-
level switch is
turned on. When
the data volume is
sufficiently large,
the percentage of
RBs actually
occupied by each
operator will reach
the preset value.
Modifications on
this parameter
affect operators'
percentages of
RBs.This parameter
RAN sharing with TDLOFD-001036
common carriers LBFD-002009 /
Indicates the
percentage of RBs
occupied by the
operator on the
physical downlink
shared channel
(PDSCH) when
RAN sharing is
enabled at the
eNodeB and the
RAN sharing mode
switch of the cell-
level switch is
turned on. When
the data volume is
sufficiently large,
the percentage of
RBs actually
occupied by each
operator will reach
the preset value.
Modifications on
this parameter
affect operators'
percentages of
RBs.This parameter
RAN sharing with TDLOFD-001036
common carriers LBFD-002009 /
specifies whether to
support the
TDD/FDD cell
configured with
dedicated MME
scenario.
When this
parameter is set to
0, the TDD/FDD cell
configured with
dedicated MME
scenario is not
supported, and no
MME can be
configured for a
cell.
When this
parameter is set to
a value between 1
and 4, the
TDD/FDD cell
configured with
dedicated MME
scenario is
supported, and the
number of MMEs
for a cell can be
configured
according to the
parameter value.
An MME is uniquely
specified by the
MME group
identifier (MMEGI)
and MME code LOFD-001018 /
(MMEC). NO NO No TDLOFD-001018
MMECfgNum
parameter is
greater than or
equal to 1.
When setting this
parameter, ensure
that the globally
unique MME
identifier
(GUMMEI),
consisting of the
PLMN, MMEGI, and
MMEC, must be
unique.
The S1 link
between an MME
configured for a cell
and the eNodeB
supporting the cell
must be available,
and the GUMMEI of
the MME must be
specified in the
ServedGummeis
parameter of the
S1Interface MO.
Otherwise, the cell
cannot broadcast
the PLMN in system
information.
If all MMEs
cannot establish S1
links to the eNodeB
supporting the cell,
the cell cannot be LOFD-001018 /
established. NO NO No TDLOFD-001018
MMECfgNum
parameter is
greater than or
equal to 1.
When setting this
parameter, ensure
that the globally
unique MME
identifier
(GUMMEI),
consisting of the
PLMN, MMEGI, and
MMEC, must be
unique.
The S1 link
between an MME
and the eNodeB
supporting the cell
must be available,
and the GUMMEI of
the MME must be
specified in the
ServedGummeis
parameter of the
S1Interface MO.
Otherwise, the cell
cannot broadcast
the PLMN in system
information.
If all MMEs
cannot establish S1
links to the eNodeB
MMECfgNum
parameter is
greater than or
equal to 2.
When setting this
parameter, ensure
that the globally
unique MME
identifier
(GUMMEI),
consisting of the
PLMN, MMEGI, and
MMEC, must be
unique.
The S1 link
between an MME
and the eNodeB
supporting the cell
must be available,
and the GUMMEI of
the MME must be
specified in the
ServedGummeis
parameter of the
S1Interface MO.
Otherwise, the cell
cannot broadcast
the PLMN in system
information.
If all MMEs
cannot establish S1
links to the eNodeB
MMECfgNum
parameter is
greater than or
equal to 2.
When setting this
parameter, ensure
that the globally
unique MME
identifier
(GUMMEI),
consisting of the
PLMN, MMEGI, and
MMEC, must be
unique.
The S1 link
between an MME
and the eNodeB
supporting the cell
must be available,
and the GUMMEI of
the MME must be
specified in the
ServedGummeis
parameter of the
S1Interface MO.
Otherwise, the cell
cannot broadcast
the PLMN in system
information.
If all MMEs
cannot establish S1
links to the eNodeB
MMECfgNum
parameter is
greater than or
equal to 3.
When setting this
parameter, ensure
that the globally
unique MME
identifier
(GUMMEI),
consisting of the
PLMN, MMEGI, and
MMEC, must be
unique.
The S1 link
between an MME
and the eNodeB
supporting the cell
must be available,
and the GUMMEI of
the MME must be
specified in the
ServedGummeis
parameter of the
S1Interface MO.
Otherwise, the cell
cannot broadcast
the PLMN in system
information.
If all MMEs
cannot establish S1
links to the eNodeB
MMECfgNum
parameter is
greater than or
equal to 3.
When setting this
parameter, ensure
that the globally
unique MME
identifier
(GUMMEI),
consisting of the
PLMN, MMEGI, and
MMEC, must be
unique.
The S1 link
between an MME
and the eNodeB
supporting the cell
must be available,
and the GUMMEI of
the MME must be
specified in the
ServedGummeis
parameter of the
S1Interface MO.
Otherwise, the cell
cannot broadcast
the PLMN in system
information.
If all MMEs
cannot establish S1
links to the eNodeB
only when the
MMECfgNum
parameter is equal
to 4.
When setting this
parameter, ensure
that the globally
unique MME
identifier
(GUMMEI),
consisting of the
PLMN, MMEGI, and
MMEC, must be
unique.
The S1 link
between an MME
and the eNodeB
supporting the cell
must be available,
and the GUMMEI of
the MME must be
specified in the
ServedGummeis
parameter of the
S1Interface MO.
Otherwise, the cell
cannot broadcast
the PLMN in system
information.
If all MMEs
cannot establish S1
links to the eNodeB
when the
MMECfgNum
parameter is equal
to 4.
When setting this
parameter, ensure
that the globally
unique MME
identifier
(GUMMEI),
consisting of the
PLMN, MMEGI, and
MMEC, must be
unique.
The S1 link
between an MME
and the eNodeB
supporting the cell
must be available,
and the GUMMEI of
the MME must be
specified in the
ServedGummeis
parameter of the
S1Interface MO.
Otherwise, the cell
cannot broadcast
the PLMN in system
information.
If all MMEs
cannot establish S1
links to the eNodeB
Indicates the
operator index that
is broadcast in the
cell system
information. NO NO Yes None
Indicates the local
ID of the cell. It
Indicates the
hysteresis for cell
reselection when
RSRP values are
used in the
evaluation. This
parameter must be
set based on the
slow fading
characteristic of the
area covered by the
cell. The greater the
slow fading
variance is, the
larger the value of
this parameter must
be set to. A larger
value of the
hysteresis results in
a larger boundary
of the serving cell
and a higher LBFD-00201803 /
probability of cell TDLBFD-00201803
reselection to LBFD-002009 /
neighboring cells. NO NO No TDLBFD-002009
Indicates whether
to set the LBFD-00201803 /
parameters related TDLBFD-00201803
to speed-dependent LBFD-002009 /
cell reselection. NO NO No TDLBFD-002009
Indicates the
duration in which
the mobility status
of the UE is
evaluated. This
parameter is one of
the key parameters
in deciding on the
UE mobility. A
smaller value of this
parameter may lead
to more frequent
switching among
mobility status and
lower decision
accuracy. A larger LBFD-002009 /
value of this TDLBFD-002009
parameter leads to LBFD-00201803 /
the opposite effect. NO NO No TDLBFD-00201803
Indicates the extra

duration required in
the evaluation
before the UE can
enter the normal-
mobility state. This
parameter can
prevent UEs from
frequently switching
from the high- or
medium-mobility
state to the normal-
mobility state, and
is one of the key
parameters in
deciding on the UE
mobility. A larger
value of this
parameter leads to
a lower probability
of transition from
the high- or
medium-mobility
state to the normal-
mobility state but
higher decision
accuracy. A smaller LBFD-002009 /
parameter leads to LBFD-00201803 /
the opposite effect. NO NO No TDLBFD-00201803
Indicates the
threshold of the
number of cell
reselections, which
is used for a UE to
enter the medium
mobility state. This
parameter is one of
the key parameters
in determining the
mobility state of the
UE. During a UE
mobility evaluation
period, if the
number of cell
reselections is
greater than this
parameter value
and is less than or
equal to the
NCellChangeHigh
parameter value, LBFD-00201803 /
the UE enters the TDLBFD-00201803
medium mobility LBFD-002009 /
Indicates the
threshold for a UE
to enter the high
mobility state.
Based on the
number of cell
reselections, this
parameter is one of
the key parameters
in determining the
mobility state of the
UE. During the UE
mobility evaluation,
if the number of cell
reselections is
greater than this LBFD-00201803 /
parameter value, TDLBFD-00201803
the UE enters the LBFD-002009 /
high mobility state. NO NO No TDLBFD-002009
Indicates the
scaling factor (or
known as additional
hysteresis) applied
to Qhyst for
medium-mobility
UEs. For details, LBFD-002009 /
see 3GPP TS TDLBFD-002009
36.304 and 3GPP LBFD-00201803 /
Indicates the
scaling factor (or
known as additional
hysteresis) applied
to Qhyst for high-
mobility UEs. For LBFD-002009 /
TS 36.304 and LBFD-00201803 /
Indicates whether
to set the
measurement
triggering threshold
for reselection to
inter-frequency or
inter-RAT cells. If
this parameter is
set to
NOT_CFG(Not
configure), a UE
always measures
inter-frequency and
inter-RAT cells LBFD-00201803 /
regardless of the TDLBFD-00201803
serving cell's signal LBFD-002009 /
quality. NO NO No TDLBFD-002009
Indicates the
measurement
for cell reselection
to inter-frequency
or inter-RAT cells. If
the cell reselection
priority of a
frequency or RAT is
higher than that of
the serving
frequency, the UE
always starts inter-
frequency or inter-
RAT measurement.
If the cell
reselection priority
of a frequency is
less than or equal
to that of the
serving frequency
or the cell
of a RAT is less
than that of the
serving frequency,
the UE starts inter-
frequency or inter-
RAT measurements
only when the value
of Cell selection RX
level value (dB) is LBFD-00201803 /
lower than or equal TDLBFD-00201803
to the value of this LBFD-002009 /
Indicates the
threshold used in
the evaluation of
reselection to a cell
on a lower priority
E-UTRAN
frequency or on an
inter-RAT
frequency. Cell
reselection to a cell
on a lower priority
E-UTRAN
frequency or on an
inter-RAT frequency
is performed if no
cell on the serving
frequency or on a
higher priority E-
UTRAN frequency
fulfills criteria 1 for
inter-frequency and
inter-RAT LBFD-00201803 /
reselections. For TDLBFD-00201803
Indicates the cell

of the serving
frequency. 0
priority. The value
of this parameter
must be determined
together with the
priorities of other
frequencies during
the network
planning.
Frequencies used
for different RATs
must be assigned LBFD-00201803 /
different cell TDLBFD-00201803
reselection LBFD-002009 /
priorities. NO NO No TDLBFD-002009
Indicates the
minimum required
RX level used in
intra-frequency E-
UTRAN cell
reselection, which
corresponds to the
IE q-RxLevMin in
SIB3. This value is
used in the
evaluation of cell LBFD-00201803 /
reselection. For TDLBFD-00201803
Indicates whether
to configure the
maximum TX power
of the UE in the
intra-frequency
the value of this
parameter is not
specified, the LBFD-00201803 /
maximum power is TDLBFD-00201803
subject to the UE LBFD-002009 /
capability. NO NO No TDLBFD-002009
Indicates the
maximum power
that the UE can
apply to
transmission in the
intra-frequency
neighboring cell. It
is used in cell
reselection criteria
to calculate the
compensated
power. If the value
not specified, the
maximum power is
capability. For TDLBFD-00201803
Indicates whether
to set the
measurement
triggering threshold LBFD-00201803 /
for reselection to TDLBFD-00201803
intra-frequency LBFD-002009 /
cells. NO NO No TDLBFD-002009
Indicates the
measurement
for reselection to
intra-frequency
cells.
The UEs start intra-
frequency
measurements only
if the value of Cell
selection RX level
value (dB) is lower LBFD-00201803 /
than or equal to the TDLBFD-00201803

to set the TDLBFD-00201803
bandwidth. NO NO No TDLBFD-002009
Indicates the
measurement
bandwidth on the
serving frequency
on which the UE
camps. It is used in
intra-frequency
measurements for
cell reselection and
those by UEs in
RRC_CONNECTE
D mode. This
parameter is
optional; if it is not
set, the downlink LBFD-00201803 /
bandwidth of the TDLBFD-00201803
serving cell is used LBFD-002009 /
by default. NO NO No TDLBFD-002009
Indicates the cell

reselection duration
of the E-UTRAN.
When the signal
quality of the new
cell is better than
the serving cell all
the time and the UE
stays in the current
serving cell for
more than 1s, the LBFD-00201803 /
UE is initiating cell TDLBFD-00201803
reselection request LBFD-002009 /
to the new cell. NO NO No TDLBFD-002009
Indicates whether
to set the scaling
parameters for LBFD-00201803 /
speed-dependent TDLBFD-00201803
cell reselection LBFD-002009 /
within E-UTRAN. NO NO No TDLBFD-002009
Indicates the
scaling factor
applied to
TReselEutra for
medium-mobility
UEs. The actual
duration of cell
reselection for
medium-mobility
UEs to E-UTRAN is
equal to the product LBFD-00201803 /
of TReselEutra and TDLBFD-00201803
TReselEutranSfMe LBFD-002009 /
dium. NO NO No TDLBFD-002009
Indicates the
scaling factor
applied to
TReselEutran for
high-mobility UEs.
The actual duration
of cell reselection of
high-mobility UEs to
E-UTRAN is equal
to TReselEutran LBFD-00201803 /
multiplied by TDLBFD-00201803
TReselEutranSfHig LBFD-002009 /
h. NO NO No TDLBFD-002009
information related
to MBSFN and TDD
UL/DL
configurations of
intra-frequency
neighboring cells of
the serving cell.
BitString00:
Indicates that some
neighboring cells
have the same
MBSFN subframe
configuration as the
serving cell.
BitString01:
Indicates that none
of the neighboring
cells is configured
with MBSFN
subframes.
BitString10:
Indicates that the
MBSFN subframe
configurations of all
neighboring cells
are the same as or
subsets of that of
the serving cell.
BitString11:
Indicates that some
neighboring cells
have different UL-
DL configurations
from the serving LBFD-00201803 /
TDD cell. TDLBFD-00201803
Indicates whether
the intra-frequency
neighboring cells
are configured with
at least two
antenna ports.
Set this parameter
to TRUE when all
the intra-frequency
neighboring cells
are configured with
at least two
antenna ports.
Set this parameter
to FALSE when one
of the intra-
neighboring cells is TDLBFD-00201803
configured with only LBFD-002009 /
one antenna port. NO NO No TDLBFD-002009
Indicates the RSRQ
threshold for
starting intra-
frequency
measurements. It
determines the
probability of
triggering cell
reselection to an
neighboring cell. TDLBFD-002009
Indicates the RSRQ

threshold for
starting inter-
frequency or inter-
RAT
measurements. It
determines the
probability of
triggering cell
reselection to an
inter-frequency or
inter-RAT LBFD-002009 /
neighboring cell. TDLBFD-002009
Indicates whether
to set the RSRQ
threshold for LBFD-002009 /
reselection to cells TDLBFD-002009
on lower-priority LBFD-00201803 /
frequencies. NO NO No TDLBFD-00201803
Indicates the RSRQ

threshold for cell
reselection to cells
on lower-priority
frequencies. It
determines the
probability of
triggering cell
reselection to inter-
frequency or inter-
RAT neighboring
cells on lower- LBFD-002009 /
priority frequencies. TDLBFD-002009
Indicates whether
to set cell
reselection
parameters in LBFD-002009 /
compliance with TDLBFD-002009
3GPP Release 9 in LBFD-00201803 /
SIB3. NO NO No TDLBFD-00201803
Indicates the
minimum required
RX signal quality
used in intra-
frequency E-
UTRAN cell
reselection, which
corresponds to the
IE q-QualMin in
SIB3. This value is
included in criteria
R and used in the
reselection. For TDLBFD-002009
Indicates the local
ID of the cell. It
LBFD-00201803 /
to configure the LOFD-001035 /
CDMA2000 system TDLOFD-001035
time information. LBFD-002009 /
For details, see TDLBFD-002009
Indicates the
network
synchronization
status. If this
parameter is set to
BOOLEAN_TRUE,
the E-UTRAN and
the CDMA2000
RAN are
synchronized
without drifts. If this
parameter is set to
BOOLEAN_FALSE,
the E-UTRAN and LBFD-00201803 /
the CDMA2000 TDLBFD-00201803
RAN are not LOFD-001090 /
synchronized. For TDLOFD-001090
LBFD-00201803 /
TDLBFD-00201803
LOFD-001035 /
TDLOFD-001035
Indicates whether LOFD-001021 /
to set the search TDLOFD-001021
window size. For LBFD-002009 /
Indicates the size of LBFD-00201803 /
the CDMA2000 TDLBFD-00201803
search window, and LOFD-001035 /
can be used to TDLOFD-001035
assist in searching LOFD-001021 /
for the neighboring TDLOFD-001021
pilots. For details, LBFD-002009 /
Indicates whether
the eNodeB
contains the
information about
CDMA2000 HRPD
in SIB8. If this
parameter is set to
CFG, the eNodeB
contains the
parametersHRPD
field in SIB8. If this
parameter is set to
NOT_CFG, the
eNodeB does not LBFD-00201803 /
contain the TDLBFD-00201803
parametersHRPD LOFD-001021 /
field in SIB8. For TDLOFD-001021
LBFD-00201803 /
to set the LOFD-001021 /
parameters related TDLOFD-001021
to cell reselection to LBFD-002009 /
CDMA2000 HRPD. NO NO No TDLBFD-002009
Indicates the
duration used in cell
reselection to
CDMA2000 HRPD.
If the signal quality
in a CDMA2000
HRPD cell is better
than that in the
serving cell for the
period specified by
this parameter and
a UE has been
camped on the
serving cell for
more than 1s, the
UE attempts to LBFD-00201803 /
reselect the TDLBFD-00201803
cell to camp on. For TDLOFD-001021
Indicates whether
to set the speed-
dependent scaling LBFD-00201803 /
to cell reselection to LOFD-001021 /
CDMA2000 HRPD. TDLOFD-001021
Indicates the
scaling factor
applied to
TReselCdmaHrpd
for high-mobility
UEs. The actual
duration of cell
reselection of high-
mobility UEs to
CDMA2000 HRPD
is equal to
TReselCdmaHrpd LBFD-00201803 /
TReselCdmaHrpdSf LOFD-001021 /
High. For details, TDLOFD-001021
Indicates the
scaling factor
applied to
TReselCdmaHrpd
for medium-mobility
UEs. The actual
duration of cell
reselection of
medium-mobility
UEs to CDMA2000
HRPD is equal to
TReselCdmaHrpd LBFD-00201803 /
TReselCdmaHrpdSf LOFD-001021 /
Medium. For TDLOFD-001021
Indicates whether
the eNodeB
contains the
information about
CDMA2000 1xRTT
in SIB8. If this
parameter is set to
CFG, the eNodeB
contains the
parameters1xRTT
field in SIB8. If this
parameter is set to
NOT_CFG, the LBFD-00201803 /
eNodeB does not TDLBFD-00201803
contain the LOFD-001035 /
parameters1xRTT LOFD-001035
field in SIB8. For LBFD-002009 /
Indicates whether
the information
element (IE)
longCodeState1XR
TT is contained in
system information
message 8 (SIB8).
When this
parameter is set to
CFG(Configure),
the IE
longCodeState1XR
TT is contained in
SIB 8. When this
parameter is set to
NOT_CFG(Not
configure), the IE
longCodeState1XR
TT is not contained
in SIB 8. The
CDMA2000 1xRTT-
specific long code
state is LBFD-00201803 /
automatically TDLBFD-00201803
generated based on LOFD-001090 /
system time. For TDLOFD-001090
LBFD-00201803 /
the parameters LOFD-001035 /
applicable only for TDLOFD-001035
cell reselection to LBFD-002009 /
CDMA2000 1xRTT TDLBFD-002009
need to be set. NO NO No TDLOFD-001090
Indicates the
duration used in cell
reselection to
CDMA2000 1xRTT.
in a CDMA2000
1xRTT cell is better
than that in the
serving cell for the
period specified by
this parameter and
a UE has been
camped on the
serving cell for
UE attempts to TDLBFD-00201803
reselect the LOFD-001035 /
cell to camp on. For LBFD-002009 /
LBFD-00201803 /
speed-dependent LOFD-001035 /
scaling parameters TDLOFD-001035
need to be set for LBFD-002009 /
cell reselection to TDLBFD-002009
CDMA2000 1xRTT. NO NO No TDLOFD-001090
Indicates the
scaling factor
applicable to cell LBFD-00201803 /
reselection of TDLBFD-00201803
medium-mobility LOFD-001035 /
UEs to CDMA2000 TDLOFD-001035
1xRTT. For details, LBFD-002009 /
Indicates the
scaling factor LBFD-00201803 /
applicable to cell TDLBFD-00201803
reselection of high- LOFD-001035 /
mobility UEs to TDLOFD-001035
CDMA2000 1xRTT. LBFD-002009 /
Indicates the local

ID of the cell. It
Indicates the
evaluation period
for a UE to
determine whether
to reselect a
GERAN cell to
camp on. If the
signal quality in a
GERAN cell is
better than that in
the serving cell for
the period specified
by this parameter
and a UE has been
camped on the
serving cell for
more than 1s, the
UE attempts to LBFD-00201803 /
reselect the TDLBFD-00201803
GERAN cell to LBFD-002009 /
camp on. NO NO No TDLBFD-002009
Indicates whether
to set the speed-
GERAN. NO NO No TDLBFD-002009
Indicates the
scaling factor
applied to
TReselGeran for
medium-mobility
UEs. The actual
duration of cell
reselection of
medium-mobility
UEs to GERAN is
equal to
TReselGeran LBFD-00201803 /
TReselGeranSfMed LBFD-002009 /
ium. NO NO No TDLBFD-002009
Indicates the
scaling factor
applied to
TReselGeran for
high-mobility UEs.
The actual duration
GERAN is equal to
TReselGeran LBFD-00201803 /
TReselGeranSfHigh LBFD-002009 /
. NO NO No TDLBFD-002009
Indicates the local

ID of the cell. It
Indicates the
evaluation period
for a UE to
determine whether
to reselect a
UTRAN cell to
camp on. If the
signal quality in a
UTRAN cell is
better than that in
by this parameter
and a UE has been
camped on the
serving cell for
UE attempts to TDLBFD-002009
reselect the UTRAN LBFD-00201803 /
cell to camp on. NO NO No TDLBFD-00201803
Indicates whether
to set the speed-
UTRAN. NO NO No TDLBFD-002009
Indicates the
scaling factor
applied to
TReselUtran for
medium-mobility
UEs. The actual
duration of cell
reselection of
medium-mobility
UEs to UTRAN is
equal to
TReselUtran
multiplied by
TReselUtranSfMedi
um.
The value
T_RESEL_SF_0DO
T25 means a
scaling factor of
0.25, LBFD-00201803 /
T_RESEL_SF_0DO TDLBFD-00201803
T5 means 0.5, and LBFD-002009 /
so on. NO NO No TDLBFD-002009
Indicates the
scaling factor
applied to
TReselUtran for
high-mobility UEs.
The actual duration
UTRAN is equal to
TReselUtran
multiplied by
TReselUtranSfHigh.
The value
T_RESEL_SF_0DO
T25 means a
scaling factor of
0.25, LBFD-00201803 /
T_RESEL_SF_0DO TDLBFD-00201803
T5 means 0.5, and LBFD-002009 /
so on. NO NO No TDLBFD-002009
Indicates the local
ID of the cell. It
Indicates the
minimum required
RX level for the cell
to become a
candidate for cell
selection. This
value is included in
criteria S and used
in the evaluation of LBFD-00201803 /
cell selection. For TDLBFD-00201803

to the minimum
required RX level.
This value is
S and used in the
evaluation of cell
selection. This
parameter is valid
only when the cell
selection is
triggered by
periodic searches
for higher-priority
PLMNs and the UE
is served by a
Visited Public Land
Mobile Network LBFD-00201803 /
(VPLMN). For TDLBFD-00201803
Indicates the
minimum required
RX signal quality for
the cell to become
a candidate for cell
selection, which
corresponds to the
IE q-QualMin in
SIB1. This value is
S and used in the
selection. For TDLBFD-002009
Indicates whether
to set the offset to LBFD-002009 /
the minimum TDLBFD-002009
required RX level LBFD-00201803 /
for the cell. NO NO No TDLBFD-00201803

to the minimum
required RX level
for the cell. It is
S and used in the
evaluation of cell
selection. This
parameter is
required only when
the cell selection is
triggered by
periodic searches
for higher-priority
PLMNs and the UE
is served by a
Visited Public Land
Mobile Network LBFD-002009 /
(VPLMN). For TDLBFD-002009
Indicates the local
ID of the cell. It
Indicates whether
the mapping from
SIBs to SI
messages is
enabled. If it is
disabled, a fixed
configuration is
used for the
mapping from SIBs
to SI messages and
the SI window size.
If it is enabled, the
mapping from SIBs
to SI messages and
the SI window size
are determined
based on the
transmission period,
quantity, and data LBFD-002009 /
traffic of SIBs. NO NO No TDLBFD-002009
Indicates the
transmission period
for system
information block
type 2 (SIB2). For
Indicates the
transmission period
for system
information block
type 3 (SIB3). For
Indicates the
transmission period
for system
information block
type 4 (SIB4). For
Indicates the
transmission period
for system
information block
type 5 (SIB5). For
Indicates the
transmission period
for system
information block
type 6 (SIB6). For
Indicates the
transmission period
for system
information block
type 7 (SIB7). For
Indicates the
transmission period
for system
information block
type 8 (SIB8). For
Indicates the
transmission period
for system
information block LBFD-002029 /
type 10 (SIB10). TDLBFD-002029
Indicates the
transmission period
for system
information block LBFD-002029 /
type 11 (SIB11). For TDLBFD-002029
Indicates the
duration of the
primary notification
(PN) broadcast for
the Earthquake and
Tsunami Warning LBFD-002029 /
System (ETWS). NO NO No TDLBFD-002029

of processing
repeated secondary
notification (SN)
broadcast for the
Earthquake and
Tsunami Warning
System (ETWS). A
repeated SN is a
second SN that has
the same IEs
Message Identifier
and Serial Number
as those in the first
SN. The value
MERGE indicates
that the cell stops
broadcasting the
first SN and then
broadcasts the
second SN. The
value DISCARD
indicates that the
cell ignores the
second SN and
continues
broadcasting the LBFD-002029 /
first SN. NO NO No TDLBFD-002029
of processing
repeated primary
notification (PN)
broadcast for the
Earthquake and
Tsunami Warning
System (ETWS). A
repeated PN is a
second PN that has
the same Message
Identifier and Serial
Number IEs as
those in the first
PN. If this
parameter is set to
MERGE, the
eNodeB stops
broadcasting the
first PN and starts
broadcasting the
second PN. If this
parameter is set to
DISCARD, the
eNodeB discards
the second PN and
continues
broadcasting the LBFD-002029 /
first PN. NO NO No TDLBFD-002029
Indicates the
transmission period
for system
information block LOFD-001092 /
type 12 (SIB12). TDLOFD-001092
Indicates the code
rate of system
information
transmission. For
details about this
parameter, see LBFD-002009 /
Indicates the local
ID of the cell. It
Indicates the
compensation
factor for path loss.
It is used in UL LBFD-002026 /
power control. For TDLBFD-002026
Indicates the target
UE transmit power
for the PUCCH
expected by the
eNodeB on
condition that
normal
demodulation can LBFD-002026 /
be performed. For TDLBFD-002026
Indicates the
nominal P0 value of
the PUSCH. It is
used in UL power LBFD-002026 /
control. For details, TDLBFD-002026
Indicates the Delta

value
corresponding to LBFD-002026 /
PUCCH format 1. TDLBFD-002026
Indicates the Delta
value
PUCCH format 1b. TDLBFD-002026
Indicates the Delta

value
PUCCH format 2. TDLBFD-002026
Indicates the Delta

value
PUCCH format 2a. TDLBFD-002026
Indicates the Delta

value
PUCCH format 2b. TDLBFD-002026
Indicates the power
offset (delta value)
of message 3
relative to the
preamble. This
power offset has a LBFD-002026 /
step size of 2. For TDLBFD-002026
Indicates the local

ID of the cell. It
Indicates the local

tracking area
identity of the cell,
which uniquely
identifies an
operator's record of
tracking area
information within a
is used only in the
eNodeB and is
different from the
TAI configured in
the TAL on the
MME. YES YES No None
Indicates reserved
32-bit switch
parameter 0 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
32-bit switch
parameter 1 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
32-bit switch
parameter 2 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 2 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 3 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 4 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 5 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 6 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 7 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 8 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 9 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates the local

cell identity. It
cell within an
Indicates the ID of
the sector device
that serves the cell,
it uniquely identifies
a sector device
within an eNodeB. YES YES No None
Indicates the
reference signal
power of the cell
sector device. The
value 32767
indicates that this
reference signal
power parameter is
the reference signal
power of the cell
equals the value of
the PDSCHCfg
parameter. For
details, see 3GPP
TS 36.213.This
parameter is valid
only when a multi-
RRU cell works in
SFN,MPRU_AGGR
EGATION or cell
combination mode. NO NO No None
Indicates the ID of
the baseband
equipment serving
a cell.
When this
parameter is set to
255, the baseband
equipment serving
a cell is not
specified. In this
scenario, the LTE
baseband
processing units
(LBBPs) serving a
cell are selected
among all LBBPs in
the eNodeB, and
the LBBPs to which
the cell's serving
RRU is connected
are preferentially
selected.
When this
parameter is set to
a value other than
255, the cell is
served by LBBPs in
the specified
baseband
equipment, and the
LBBPs to which the
cell's serving RRU
is connected are
preferentially
selected. NO NO No None
Indicates the
cabinet number of
the RRU. NO NO Yes None
Indicates the
subrack number of
the RRU. NO NO Yes None
Indicates the slot
number of the RRU. NO NO Yes None
Indicates the
received total
wideband power
(RTWP) for the
carrier. The normal
value range is from
-110 dBm to -40
dBm. The RRU
cannot work
properly if the value
is out of range. NO NO Yes None
Indicates the RX
channel number of
the RRU. An RRU
is configured with
multiple RX
Indicates the cell

reference signal
power headroom of
each physical
Indicates the local
cell identity. It
cell within an
Indicates the group

ID of the sector
devices that serve
the cell, it uniquely
identifies a group of
sector devices

the sector devices
that serve the cell. NO YES No None
Indicates the ID of
the sector device
that serves the cell,
it uniquely identifies
a sector device
Indicates the ID of
the baseband
equipment serving
a cell.
When this
parameter is set to
255, the baseband
equipment serving
a cell is not
specified. In this
scenario, the LTE
baseband
processing units
(LBBPs) serving a
cell are selected
among all LBBPs in
the eNodeB, and
the LBBPs to which
the cell's serving
RRU is connected
are preferentially
selected.
When this
parameter is set to
a value other than
255, the cell is
served by LBBPs in
the specified
baseband
equipment, and the
LBBPs to which the
cell's serving RRU
is connected are
preferentially
selected. NO NO No None
Indicates the local
cell identity of the
cell. It uniquely
identifies a cell
Indicates the ID of
the eNodeB to
which the
RRU/RFU
connected. NO NO Yes None
Indicates the
cabinet number of
the RRU/RFU. NO NO Yes None
Indicates the
subrack number of
the RRU/RFU. NO NO Yes None
Indicates the slot
number of the
RRU/RFU. NO NO Yes None
Indicates the
number of LBBP
data links. NO NO Yes None
Indicates the LBBP
data link ID. NO NO Yes None

of the LBBP data
Indicates the open
DU interface (ODI)
ID. NO NO Yes None
Indicates the input
port number of the
LBBP data link. NO NO Yes None
Indicates the output
port number of the
Indicates the
loopback delay on
the LBBP data link. NO NO Yes None
Indicates the
number of loopback
timeouts on the
Indicates the
cabinet number of
the board involved
in data link
transmission. NO NO Yes None
Indicates the
subrack number of
the board involved
in data link
Indicates the slot
number of the
board involved in
data link
Indicates the local
cell within an
of the uplink time
alignment timer for
UEs in the cell. A
UE is considered
not time-aligned in
the uplink if the LBFD-002009 /
timer expires. NO NO No TDLBFD-002009
This ensures the
uplink time
alignment
performance if the
length of the uplink
time alignment
timer is set to a
large value.
set to ON, it is
recommended that
the
TimeAlignmentTime
r parameter be set
to SF10240. A
TimeAlignmentTime
r parameter, such
as SF5120, leads to
a higher probability
of becoming out-of-
synchronization in
the uplink for UEs
in DRX mode.
set to ON, it is
recommended that
the LongDrxCycle
parameter be
smaller than or
equal to SF320.
Otherwise, the
uplink time
alignment
performance of UEs
in DRX mode is
affected. NO NO No None
Indicates the local
ID of the cell. It
Indicates the timer
value of Timer 300.
For details, see
3GPP TS 36.331.
when the UE sends
RRCConnectionRe
quest.
Before the timer
expires, it is
stopped if the UE
receives
RRCConnectionSet
up or
RRCConnectionRej
ect.
After the timer
expires, the UE
enters the LBFD-002009 /
RRC_IDLE state. NO NO No TDLBFD-002009

of timer 301. For
details, see 3GPP
TS 36.331.
when the UE sends
an RRC Connection
Reestablishment
Request message.
The timer is
stopped if, before it
expires, the UE
receives an RRC
Connection
Reestablishment or
RRC Connection
Reestablishment
Reject message.
The timer is also
stopped if the
selected cell
becomes an
unsuitable cell. For
the definition of a
suitable cell, see
3GPP TS 36.331.
After the timer
expires, the UE
RRC_IDLE mode. NO NO No TDLBFD-002009
of timer 310. For
details, see 3GPP
TS 36.331.
when the UE
detects any fault at
the physical layer.
The timer is
stopped if the UE
detects one of the
following before the
timer expires: (1)
The physical-layer
fault is rectified; (2)
A handover is
triggered; (3) The
UE initiates an RRC
connection
reestablishment
procedure.
After the timer
expires, the UE
enters the
RRC_IDLE mode if
the security mode is
not activated. If the
security mode is
activated, the UE
initiates an RRC
connection
reestablishment LBFD-002009 /
procedure. NO NO No TDLBFD-002009
of timer 311. For
details, see 3GPP
TS 36.331.
when the UE starts
the RRC
connection
reestablishment
procedure.
The timer is
stopped if, before
the timer expires,
the UE selects an
E-UTRAN or inter-
RAT cell to camp
on.
After the timer
expires, the UE
RRC_IDLE mode. NO NO No TDLBFD-002009
Indicates the
maximum number
of successive "in
sync" indications
received from L1.
Indicates the
maximum number
of successive "out
of sync" indications
received from L1.
Indicates the local

ID of the cell. It
Indicates the name
of the cell. NO YES No None
Indicates whether
the cell is a closed
subscriber group
(CSG) cell. A CSG
cell has restrictions
on UE access. It
broadcasts a
specific CSG ID in
the SIB and only
those UEs of the
group can access
the CSG cell.
BOOLEAN_FALSE
indicates that the
cell is not a CSG
cell, and
BOOLEAN_TRUE
indicates that the
cell is a CSG cell. LBFD-002009 /
Currently, Huawei TDLBFD-002009
eNodeBs do not LBFD-00201803 /
support CSG cells. NO NO No TDLBFD-00201803
Indicates the UL
cyclic prefix length
of a cell. A cyclic
prefix can be a
common or
extended cyclic
prefix. An extended
cyclic prefix is
generally used in a
complex
environment with a
strong multi-path
effect and long
delay. In a cell, the
UL cyclic prefix
length can be
different from the
DL one. In addition,
the UL or DL cyclic
prefix length of a
cell must be the LBFD-00100401 /
same as that of the TDLBFD-00100401
cell using the same LOFD-001031 /
LBBP. For details, TDLOFD-001031
of the DL cyclic
prefix of a cell. A DL
cyclic prefix can be
a common or
extended cyclic
prefix. An extended
cyclic prefix is
generally used in a
complex
environment with a
strong multi-path
effect and long
delay. In a cell, the
UL cyclic prefix
length can be
different from the
DL one. In addition,
the UL or DL cyclic
prefix length of a
cell must be the
same as that of the
cell using the same LBFD-00100401 /
LBBP. For details, TDLBFD-00100401
Indicates the
frequency band in
which the cell
operates. For LBFD-00201803 /
details about this TDLBFD-00201803
3GPP TS 36.104. NO YES No TDLBFD-002009
Indicates whether
to configure the UL
EARFCN of the cell.
For an FDD cell, if
no UL EARFCN is
configured, the UL
EARFCN equals
the sum of the DL
EARFCN and
18000 by default. LBFD-00201803 /
For a TDD cell, the TDLBFD-00201803
UL EARFCN equals LBFD-002009 /
the DL EARFCN. NO NO No TDLBFD-002009
Indicates the UL
EARFCN of the cell.
It is optional,
depending on the
setting of the UL
EARFCN
configuration
indicator
(UlEarfcnCfgInd). If
the value of this
parameter is not
specified, the
default UL EARFCN LBFD-00201801 /
is used, which is TDLBFD-00201801
calculated based on LBFD-00201803 /
the DL EARFCN. TDLBFD-00201803
LBFD-002009 /
TDLBFD-002009
Indicates the DL LBFD-00201801 /
EARFCN of the cell. TDLBFD-00201801
For details, see the LBFD-00201803 /
Indicates the UL
bandwidth of the
cell, which is based
on the number of
resource blocks
(RBs). The value
CELL_BW_N25
indicates a cell
bandwidth of 25
RBs. The value
CELL_BW_N50
indicates a cell
bandwidth of 50
RBs. The mapping
between the
parameter value
and the actual cell
bandwidth (that is,
the number of RBs)
can be deduced LOFD-001051
similarly. For LBFD-002009 /
TS 36.104. NO YES No TDLBFD-001003
Indicates the DL
bandwidth of the
cell, which is based
on the number of
resource blocks
(RBs). The value
CELL_BW_N25
indicates a cell
bandwidth of 25
RBs. The value
CELL_BW_N50
indicates a cell
bandwidth of 50
RBs. The mapping
between the
parameter value
and the actual cell
bandwidth (that is,
the number of RBs)
can be deduced LOFD-001051
similarly. For LBFD-002009 /
Indicates the ID of
the E-UTRAN cell.
The combination of
this parameter and
the eNodeB ID
forms the E-UTRAN
cell identity. The
combination of the
E-UTRAN cell
identity and the
PLMN identity
forms the ECGI. For
Indicates the
physical cell ID. For LOFD-001051
Indicates the
additional spectrum
emission, which
restricts the
emission power of
the UEs in the cell.
For details, see the LBFD-002009 /
Indicates the active
state of the cell. It
consists of the
activated and
deactivated states. NO NO No None
Indicates the
administrative state,
which can be
Unblock, High
block, Middle block,
or Low block.If the
CellAdminState
parameter is set to
CELL_HIGH_BLOC
K, the cell is
deactivated
immediately. If the
CellAdminState
parameter is set to
CELL_MIDDLE_BL
OCK, the cell is
deactivated when it
has no user to
serve during the
time period
specified by the
CellMidBlkTimer
parameter, and is
deactivated when
the timer expires
irrespective of
whether it has
users to serve. If
the CellAdminState
parameter is set to
CELL_LOW_BLOC
K, the cell is
deactivated only
when the cell does
not have any users
to serve. NO NO No None

of the timer used to
determine whether
to block a middle-
blocking-priority
cell. If
CellAdminState is
set to
CELL_MIDDLE_BL
OCK, the cell is
deactivated when
no user accesses
the cell during the
period of time
specified by this
parameter. The cell
is also deactivated
if the timer expires. NO NO No None
Indicates the duplex LBFD-002009
mode of the cell. TDLBFD-001007
CELL_FDD TDLBFD-00100701
indicates the FDD TDLBFD-00100702
mode, and TDLOFD-001026
CELL_TDD TDLOFD-00102601
indicates the TDD TDLOFD-00102602
mode. NO YES No TDLOFD-00102603
LBFD-002009
TDLBFD-001007
Indicates the ratio TDLBFD-00100701
of UL subframes to TDLBFD-00100702
DL subframes in a TDLOFD-001026
TDD cell. For TDLOFD-00102601
LBFD-002009
Indicates the ratio TDLBFD-001007
of special UL TDLBFD-00100701
subframes to TDLBFD-00100702
special DL TDLOFD-001026
subframes in a TDD TDLOFD-00102601
cell. For details, see TDLOFD-00102602
Indicates the cell
specific offset for
the serving cell. It LBFD-00201801 /
affects the TDLBFD-00201801
probability of TDLBFD-002018
triggering TDLBFD-00201802
handovers from the TDLBFD-00201804
serving cell to its TDLBFD-00201805
neighboring cells. A TDLOFD-001019
smaller value of this TDLOFD-001043
parameter leads to TDLOFD-001072
a higher probability. TDLOFD-001020
Indicates the
specific frequency
offset of the serving LBFD-00201801
cell. This parameter LBFD-00201803
is contained in the TDLBFD-002018
control information TDLBFD-00201804
and is related to the TDLBFD-00201805
handover difficulty TDLOFD-001019
between the TDLOFD-001043
serving cell and the TDLOFD-001072
neighboring cell. TDLOFD-001020
Indicates the first
logical root
sequence, which is
used to generate
the preamble
sequence. Each
logical root
sequence
corresponds to a
physical root
sequence. For the
mapping between
logical root
sequences and
physical root
sequences, see LBFD-002010 /
Indicates the speed
flag of the cell. Set
this parameter to
ULTRA_HIGH_SPE
ED if the cell is
used to provide
coverage for an
ultra-high-speed
railway. Set this
parameter to
HIGH_SPEED if the
cell is used to
provide coverage
for a high way. Set LOFD-001007 /
this parameter to TDLOFD-001007
LOW_SPEED in LOFD-001008 /
other scenarios. NO NO No TDLOFD-001008
Indicates the
preamble format
used in the cell. For
Indicates the radius LBFD-002010 /
of the cell. NO NO No TDLBFD-002010
Indicates whether
to configure
bandwidth
customization for
the cell. Bandwidth
customization is
available only when
the bandwidth is 5
MHz, 10 MHz, 15
MHz, or 20 MHz. NO NO No LOFD-001051
Indicates the
customized UL cell
bandwidth.
Bandwidth
customization is
available only when
the bandwidth is 5
MHz, 10 MHz, 15
Indicates the
customized DL cell
bandwidth.
Bandwidth
customization is
available only when
the bandwidth is 5
MHz, 10 MHz, 15
LBFD-002029 /
TDLBFD-002029
LOFD-001092 /
to set an LBFD-002009 /
emergency area ID. NO NO No TDLBFD-002009
Indicates the ID of
the notification area
within which a
warning notification
is broadcast. The
area consists of
one or more cells
and can be LBFD-002029 /
customized by TDLBFD-002029
operators. For LOFD-001092 /
details about this TDLOFD-001092
Indicates whether
to configure the
maximum TX power
of the UE in the
cell. If the value of
this parameter is
not specified, the LBFD-002026 /
maximum power is TDLBFD-002026
Indicates the
maximum transmit
power that a UE
can apply to uplink
transmission in the
cell. It is used in cell
selection criterion S
to calculate the
compensated
power. If the value
not specified, the
maximum power is
capability. For TDLBFD-002026
LOFD-003029 /
TDLOFD-001075
TDLOFD-002008
to enable or disable TDLOFD-001080
the multi-RRU cell TDLOFD-001081
feature. NO NO No TDLOFD-001082
LOFD-003029 /
TDLOFD-001075
TDLOFD-002008
TDLOFD-001098
Indicates the type TDLOFD-001080
of the multi-RRU TDLOFD-001081
Indicates the CPRI
compression type
of the cell. CPRI
compression is
used in RRU
cascading
scenarios to
improve the
cascading
specifications
without changing
the CPRI data rate.
This parameter can
be set to
NO_COMPRESSIO
N or
NORMAL_COMPR
ESSION. The value
NO_COMPRESSIO
N indicates that
CPRI compression
is not used, and the
value
NORMAL_COMPR
ESSION indicates
that CPRI
compression is
used. In addition,
the CPRI
compression type
must be the same
for cells using the
same RRU chain. NO NO No None
Indicates the
number of sector
devices that serve
an SFN cell. NO NO No None
Indicates whether
the cell is an air
cell. NO NO No None
Indicates the
number of ports for
transmitting
reference signals in
a cell. This
parameter is
dedicated to LTE
TDD cells. As
specified in
protocols, the CRS
Port Number
parameter can be
set to 1, 2, or 4.
(CRS is short for
Cell Reference
Signal.) The value 1
indicates that one
CRS port (port 0) is
configured. The
value 2 indicates
that two CRS ports
(port 0 and port 1)
are configured. The
value 4 indicates
that four CRS ports
(port 0, port 1, port
2, and port 3) are
Indicates the
transmission and
reception mode of
the cell. NO YES No None
Indicates the user

label of the cell. NO NO No None
Indicates the work
mode of the cell. LAOFD-00100101
The DL_ONLY LAOFD-00100102
mode applies only LAOFD-00100201
to the carrier LAOFD-00100202
aggregation TDLAOFD-001003
scenario. NO NO No TDLAOFD-001002
Indicates the active

or standby mode of
the cell. A cell is in
active mode by
default. The
standby mode
applies to LTE TDD.
set to STANDBY, an
inter-BBU SFN
auxiliary cell can roll
back to the standby
mode to provide
services if inter-
BBU faults occur.
Only common or
SFN cells support LBFD-002009 /
the standby mode. NO NO No TDLBFD-002009
Indicates the state
of the cell instance. NO NO Yes None
Indicates the
reason that causes
the latest state
change of the cell,
which can be a cell
activation success
or a cell setup
failure. NO NO Yes None
Indicates the latest
setup time of the
cell. NO NO Yes None
setup type of the
remove time of the
remove type of the
Indicates the
energy
conservation and
emission reduction
mode of the cell.
The energy
conservation and
emission reduction
mode of the cell
can be set to: RF
channel intelligent
shutdown mode,
intelligent power-off
of carriers mode,
low power
consumption mode,
RF module regular
time sleep mode,
of carriers in the
same coverage of
UMTS network
mode, or dynamic
voltage adjustment
mode. NO NO Yes None
Indicates the
cabinet number,
subrack number
and slot number of
the primary LBBP
that serves the cell. NO NO Yes None
Indicates the
topology of the cell. NO NO Yes None
Indicates the
cabinet number of
the RF module that
serves the cell. NO NO Yes None
Indicates the
subrack number of
the RF module that
Indicates the slot
number of the RF
module that serves
the cell. NO NO Yes None
Indicates whether
the cell is in the
symbol power
saving state. NO NO Yes None
Indicates the
maximum transmit
power of the cell in
theory. The value
65535 indicates
that this parameter
is invalid, which can
be changed by
modifying the
physical downlink
shared channel
(PDSCH)
configuration or the
PA parameter
related to power
control for the
PDSCH. NO NO Yes None
Indicates the ID of
the eNodeB. NO NO Yes None
Indicates the
cabinet number of
the LBBP that
Indicates the
subrack number of
the LBBP that
serves thethe
Indicates cell.
slot NO NO Yes None
number of the
LBBP that serves
the cell. NO NO Yes None
Indicates the work
status of the RF
module and LBBP
that serves the cell. NO NO Yes None
Indicates the local
cell identity of the
uplink coordinating
the highest priority
is configured based
on FreqBand, and
the downlink
frequencies in other
frequency bands
are configured
based on this
parameter. If there
are multiple
frequency bands of
different priorities,
downlink
frequencies in the
frequency bands
are configured
based on the
priorities in
descending order.
The frequency band
priorities of a cell
are determined
based on the
network planning of
an operator. It is
recommended that
the frequency band
values are arranged
in ascending order.
The frequency band
with the minimum
value is of the
the frequency band
with the maximum
value is of the
lowest priority. NO YES No None
Indicates the
frequency band in
which the cell
operates. For
details about this
parameter, see
Indicates the ID of
the sector device, it
sector device within TDLOFD-001080
an eNodeB. YES YES No TDLOFD-001082
Indicates the ID of
the main eNodeB. YES YES No None
Indicates the local

cell identity of a cell
of the main
eNodeB, it uniquely
identifies a cell
within the main
Indicates the ID of
the baseband
equipment serving
a cell.
When this
parameter is set to
255, the baseband
equipment serving
a cell is not
specified. In this
scenario, the LTE
baseband
processing units
(LBBPs) serving a
cell are selected
among all LBBPs in
the eNodeB, and
the LBBPs to which
the cell's serving
RRU is connected
are preferentially
selected.
When this
parameter is set to
a value other than
255, the cell is
served by LBBPs in
the specified
baseband
equipment, and the
LBBPs to which the
cell's serving RRU
is connected are
preferentially TDLOFD-001080
selected. NO NO No TDLOFD-001082
Indicates the
reference signal
power of the single
frequency network
(SFN) auxiliary
eNodeB resource.
The value 32767
indicates that this
reference signal
power parameter is
power of the cell
refers to the value
of the PDSCHCfg
parameter. For
Indicates the cell

reference signal
power headroom of
each physical
Indicates the local
ID of the cell. It
Indicates the ID of
the auxiliary
Indicates the cell ID
of the local cell. It
cell within an
Indicates the
maximum number
of beamforming
layers, that is, the
rank of
beamforming. The
value
SINGLE_LAYER_B
F indicates single-
stream
beamforming (that
is, beamforming
with the rank of 1),
and the value
DUAL_LAYER_BF
indicates dual-
stream
beamforming (that
is, beamforming TDLOFD-001049
with the rank of 2). NO NO No TDLOFD-001061
Indicates the result
after the last cell
channel
rectification. NO NO Yes None
after the second
from the last cell
channel
after the third from
the last cell channel
after the fourth from
after the fifth from
after the sixth from
after the seventh
from the last cell
channel
after the eighth
from the last cell
channel
after the ninth from
after the tenth from
Indicates the time
after the last cell
channel
Indicates the time
after the second
from the last cell
channel
Indicates the time
Indicates the time
Indicates the time
Indicates the time
Indicates the time
after the seventh
from the last cell
channel
Indicates the time
after the eighth
from the last cell
channel
Indicates the time
Indicates the time
Indicates the type
after the last cell
channel
Indicates the type
after the second
from the last cell
channel
Indicates the type
Indicates the type
Indicates the type
Indicates the type
Indicates the type
after the seventh
from the last cell
channel
Indicates the type
after the eighth
from the last cell
channel
Indicates the type
Indicates the type
Indicates the local

ID of the cell. It
Indicates the
interval between
periodic
measurement
reports that are
sent after a DL ICIC
measurement event
is triggered. For LBFD-00202201 /
TS 36.331. NO NO No LOFD-00101401
Indicates the
maximum number
of cells to be
included in each
measurement
report after a DL
ICIC measurement
event is triggered. LBFD-00202201 /
3GPP TS 36.331. NO NO No LOFD-00101401
Indicates the
number of periodic
measurement
reports after a DL
ICIC measurement
event is triggered. LBFD-00202201 /
3GPP TS 36.331. NO NO No LOFD-00101401
quantity to be
included in the
measurement
report after a DL
ICIC measurement
event is triggered,
which can be set to
SAME_AS_TRIG_
QUAN or BOTH.
The value
SAME_AS_TRIG_
QUAN indicates
that the quantity to
be included is the
same as that
specified by the
TriggerQuantity
parameter. The
value BOTH
indicates that both
RSRP and RSRQ
values are included.
The measured
RSRP values are
with the load, and
therefore there is
little signal
fluctuation. The
measured RSRQ
load and are likely
real time. For LBFD-00202201 /
TS 36.331. NO NO No LOFD-00101401
Indicates the
evaluation of a DL
ICIC measurement
event. The quantity
can be RSRP or
RSRQ. The
measured RSRP
values are stable,
varying little with
the load, and
therefore there is
little signal
fluctuation. The
measured RSRQ
load but are likely to
reflect the signal LBFD-00202201 /
quality of the cell in TDLBFD-00202201
real time. NO NO No LOFD-00101401
Indicates the
hysteresis for the
DL ICIC
measurement
event. This
parameter is used
to decrease
frequent triggering
of event evaluations
due to radio signal
fluctuations. For LBFD-00202201 /
TS 36.331. NO NO No LOFD-00101401
Indicates the time-

to-trigger for the DL
ICIC measurement
event. When
detecting that the
in at least one
neighboring cell
meet the entering
condition, the UE
does not send a
measurement
report to the
eNodeB
immediately.
Instead, the UE
sends a report only
when the signal
meets the entering LBFD-00202201 /
condition during the TDLBFD-00202201
time-to-trigger. NO NO No LOFD-00101401
for DL ICIC event
A3. This offset is
the difference
between the quality
of a neighboring
a neighboring cell
must have better
quality for the LBFD-00202201 /
reporting of the TDLBFD-00202201
event. NO NO No LOFD-00101401
for DL ICIC event
A6. This offset is
the difference
between the quality
of a neighboring
a neighboring cell
must have better
quality for the LBFD-00202201 /
reporting of the TDLBFD-00202201
event. NO NO No LOFD-00101401
Indicates the local
cell identity. It
cell within an
Indicates the ABS
pattern after the
TDM eICIC is
enabled. This
parameter is valid
only when the
eICIC is enabled.
Different ABS
pattern settings
indicate
configurations with
different ABS
numbers in the
same period. For
example, the value
SUBFRAME_ONE_
PER_FIVE
indicates that One
ABS per 5 ms. The
ABS pattern is a
bitmap with a bit
string of 40 bits. For
details, see the
definition of ABS
Pattern Info in
3GPP TS 36.423.
This parameter is
valid only when all
the ABS patterns
for all cells are the
same. NO NO No LOFD-001099
Indicates the local
ID of the cell. It

for the functionality
of the low power
consumption mode.
The cell can enter
the low power
consumption mode
only when this
parameter is set to
ON and specific LOFD-001040 /
conditions are met. NO NO No TDLOFD-001040
for forcibly entering
the low power
consumption mode.
When both this
switch and the
functionality switch
are set to ON, the
cell enters the low
power consumption
mode as soon as
the wait time for
entering the mode
elapses, regardless
of whether it is
within the low
power consumption
period. When the
functionality switch
is set to ON but this
switch is set to OFF,
the cell enters the
low power
consumption mode
as soon as the wait
time for entering the
mode elapses, if a
mains input out of
range(Specific
Problem: AC
Failure) alarm is
reported within the
low power
Indicates the start

time of the low
power consumption LOFD-001040 /
mode. NO NO No TDLOFD-001040
Indicates the stop

time of the low
power consumption
mode. If the stop
time is earlier than
or the same as the
start time, the stop
time is assumed to
be a time of the LOFD-001040 /
next day. NO NO No TDLOFD-001040
Indicates the
duration in which
the transmit power
for services is
reduced in the cell
in low power LOFD-001040 /
consumption mode. NO NO No TDLOFD-001040
Indicates the
duration in which
transmit power is
reduced in the cell
Indicates the
duration in which
RF channels are
shut down in the
cell in low power LOFD-001040 /
Indicates the
percentage of the
transmit power for
services to the total
transmit power for
services when the
low power
consumption mode
is implemented by
means of reducing
the transmit power LOFD-001040 /
for services. NO NO No TDLOFD-001040
Indicates the
amount by which
transmit power is
reduced in the cell
power consumption
mode. In low power
consumption mode,
a cell automatically
takes the following
actions in
sequence: 1. lowers
the transmit power
for services; 2.
lowers the transmit
power for reference
signals; 3. shuts
down some RF
channels in the cell;
4. shuts down the
cell. This duration
smooths the
transition from the
normal mode to the
low power
consumption mode
for the cell. If the
conditions for the
cell to enter the low
power consumption
mode are no longer
met during this
period of time, the
cell will not enter
the low power
consumption mode;
otherwise, it enters
the low power
consumption mode
and takes the
preceding actions in LOFD-001040 /
sequence. NO NO No TDLOFD-001040
that of reference
signal power
degradation, and
that of RF channel
are all 0 minutes. If
this parameter is
set to POLICY1,
POLICY2 or
POLICY3, the ratio
of available service
power to total
service power is
50%, the
adjustment offset
for reference signal
power is -1 dB, and
the wait time for
entering the low
power consumption
mode is 5 minutes.
set to
CUSTOMIZED, you
can customize the
duration of power
degradation, the
ratio of available
service power to
total service power,
the adjustment
offset for reference
signal power, and
the wait time for
entering the low
power consumption LOFD-001040 /
Indicates the local
ID of the cell. It
cell within an
Ofn are the
frequency-specific
offsets for the
serving frequency
and neighboring
frequency
respectively, Ocs is
the cell-specific
offset for the
serving cell, and
Hys is the
hysteresis for intra-
frequency
handover. If this
parameter is set to
NOT_CFG(Not
configure), the
upper and lower
limits of the CIO
adjustment range
for the cell in inter-
frequency MRO are
calculated by using
the following
formulas: Lower
limit = -24, Upper
limit = thresh + 110
- Ofn + Hys, where
thresh is the RSRP
threshold for
triggering a
coverage-based
inter-frequency
handover and Hys
is the hysteresis for
inter-frequency LOFD-002005 /
Indicates the upper
limit of cell
individual offset
(CIO) adjustment
range for the cell in
mobility robustness
optimization (MRO).
This parameter
needs to be set
only when the
CioAdjLimitCfgInd
CFG. NO NO No TDLOFD-002005
Indicates the lower
limit of cell
individual offset
(CIO) adjustment
range for the cell in
mobility robustness
optimization (MRO).
This parameter
needs to be set
only when the
CioAdjLimitCfgInd
CFG. NO NO No TDLOFD-002005
Indicates the local
cell ID. It uniquely
identifies a cell
within a BS. YES YES No None
Indicates the
Allocation and
Retention Priority
(ARP) threshold for
the Golden-level
services. A service
is defined as a
Golden-level
service if its ARP
value is smaller
than or equal to this
threshold. The
service priority has
a negative
correlation with the LBFD-002023 /
ARP value. NO NO No TDLBFD-002023
Indicates the
Allocation and
Retention Priority
(ARP) threshold for
the Silver-level
services. A service
is defined as a
Silver-level service
if its ARP value is
smaller than or
equal to the value
of this parameter
and is larger than
the value of
GoldServiceArpThd
. A service is
defined as a
Bronze-level
service if its ARP
value is larger than
the value of this
parameter. The
service priority has
a negative
correlation with the LBFD-002023 /
ARP value. NO NO No TDLBFD-002023
Indicates the
admission threshold
for the handed-over
service with QCI of
1. This threshold
applies to both UL
and DL.
If the satisfaction
rate of services with
QCI of 1 is above or
equal to this
threshold, the
handed-over
service with QCI of
1 can be admitted.
If the satisfaction
QCI of 1 is below
this threshold, the
handed-over
service with QCI of
1 cannot be LBFD-002023 /
admitted. NO NO No TDLBFD-002023
Indicates the
admission threshold
for the handed-over
service with QCI of
2. This threshold
applies to both UL
and DL.
If the satisfaction
equal to this
threshold, the
handed-over
service with QCI of
2 can be admitted.
If the satisfaction
QCI of 2 is below
this threshold, the
handed-over
service with QCI of
Indicates the
admission threshold
for the handed-over
service with QCI of
3. This threshold
applies to both UL
and DL.
If the satisfaction
equal to this
threshold, the
handed-over
service with QCI of
3 can be admitted.
If the satisfaction
QCI of 3 is below
this threshold, the
handed-over
service with QCI of
Indicates the
admission threshold
for the handed-over
service with QCI of
4. This threshold
applies to both UL
and DL.
If the satisfaction
equal to this
threshold, the
handed-over
service with QCI of
4 can be admitted.
If the satisfaction
QCI of 4 is below
this threshold, the
handed-over
service with QCI of

for admission of
new gold-level
services. This
parameter applies
to both downlink
and uplink. New
gold-level services
and handed-over
services with QCI N
are admitted if both
the following
conditions are met:
(1) The satisfaction
QCI N is higher
sum of this offset
and the admission
threshold for the
handed-over
services with QCI
N. (2) The
satisfaction rate of
services with any
other QCI is higher
corresponding
admission threshold
for the handed-over
services with that LBFD-002023 /
QCI. NO NO No TDLBFD-002023
for admission of
new silver-level
services. This
parameter applies
to both downlink
and uplink. New
silver-level services
and handed-over
services with QCI N
the following
conditions are met:
QCI N is higher
sum of this offset
and the admission
threshold for the
handed-over
services with QCI
N. (2) The
services with any
other QCI is higher
corresponding
admission threshold
for the handed-over
for admission of
new bronze-level
services. This
parameter applies
to both downlink
and uplink. New
bronze-level
services and
handed-over
services with QCI N
the following
conditions are met:
QCI N is higher
sum of this offset
and the admission
threshold for the
handed-over
services with QCI
N. (2) The
services with any
other QCI is higher
corresponding
admission threshold
for the handed-over
Indicates the
congestion
threshold for
services with QCI of
1. This threshold
applies to both UL
and DL.
If the satisfaction
QCI of 1 in the cell
becomes lower
the services with
QCI of 1 enter the
congested state.
If the satisfaction
becomes higher
than the sum of this
threshold and the
congestion relief
offset, the services
with QCI of 1 leave
the congested LBFD-002024 /
Indicates the
congestion
threshold for
2. This threshold
applies to both UL
and DL.
If the satisfaction
becomes lower
the services with
QCI of 2 enter the
congested state.
If the satisfaction
becomes higher
threshold and the
congestion relief
with QCI of 2 leave
Indicates the
congestion
threshold for
3. This threshold
applies to both UL
and DL.
If the satisfaction
rate of the services
with QCI of 3 in the
cell becomes lower
the services with
QCI of 3 enter the
congested state.
If the satisfaction
becomes higher
threshold and the
congestion relief
with QCI of 3 leave
Indicates the
congestion
threshold for
4. This threshold
applies to both UL
and DL.
If the satisfaction
becomes lower
the services with
QCI of 4 enter the
congested state.
If the satisfaction
becomes higher
threshold and the
congestion relief
with QCI of 4 leave
Indicates the rate
reduction proportion
for Gold-level GBR
services. When
congestion occurs,
the rate that the
scheduling
algorithm provides
for Gold-level GBR
services (except
VoIP services) is
the product of GBR
and this proportion.
This parameter will
be removed in later
versions. In this
still synchronized
between the M2000
and the eNodeB,
but it is no longer
used internally.
Therefore, avoid
Indicates the rate

for Silver-level GBR
services. When
congestion occurs,
the rate that the
scheduling
algorithm provides
for Silver-level GBR
services (except
VoIP services) is
the product of the
GBR and this
proportion. This
parameter will be
removed in later
versions. In this
still synchronized
between the M2000
and the eNodeB,
but it is no longer
used internally.
Therefore, avoid
Indicates the rate
for Bronze-level
GBR services.
When congestion
occurs, the rate that
the scheduling
algorithm provides
for Bronze-level
GBR services
(except VoIP
services) is the
product of GBR and
this proportion. This
parameter will be
removed in later
versions. In this
still synchronized
between the M2000
and the eNodeB,
but it is no longer
used internally.
Therefore, avoid
threshold for high
resource usage by
guaranteed bit rate
(GBR) services.
This parameter is
expressed in
percentage and
applies to both
uplink and
downlink. If the
MAC layer detects
that the resource
usage by GBR
services exceeds
the threshold, the
usage is high. In
this situation, new
GBR services are
not admitted if
GbrUsageSwitch
under the
RacAlgoSwitch
parameter is turned
on. This parameter
will be removed in
later versions. In
this version, the
setting of this
parameter is still
synchronized
between the M2000
and the eNodeB,
but it is no longer
used internally.
Therefore, avoid
Indicates the
threshold for low
resource usage by
guaranteed bit rate
(GBR) services.
This parameter is
expressed in
percentage and
applies to both
uplink and
downlink. If the
MAC layer detects
that the resource
usage by GBR
services falls below
the threshold, the
usage is low. This
parameter will be
removed in later
versions. In this
still synchronized
between the M2000
and the eNodeB,
but it is no longer
used internally.
Therefore, avoid
Indicates the
Allocation and
Retention Priority
(ARP) threshold for
low Energy
Efficiency Ratio
(EER) services. If
the ARP value of a
service is less than
the value of this
parameter, the
service will not be
released for
congestion control.
This parameter will
be removed in later
versions. In this
still synchronized
between the M2000
and the eNodeB,
but it is no longer
used internally.
Therefore, avoid
Indicates the
congestion release
offset. The service
of a specific QCI
exits the congestion
state if the
the service exceeds
the sum of this
congestion release
offset and the
congestion
threshold for the
QCI. The service
retains the
congestion state if
the satisfaction rate
is below or equal to
the sum of this
congestion release
offset and the
congestion
threshold for the LBFD-002024 /
Indicates the
Allocation and
Retention Priority
(ARP) threshold for
preemption. The
services that have
ARP values larger
value of this
parameter are
preemptible. This
parameter will be
removed in later
versions. In this
still synchronized
between the M2000
and the eNodeB,
but it is no longer
used internally.
Therefore, avoid
using this LOFD-00102901 /
Indicates the
threshold for
deciding on
whether the UL RB
usage is high. This
threshold applies to
UL admission
decision. If the UL
RB usage reported
by the MAC layer is
above this
threshold, the UL LBFD-002023 /
RB usage is TDLBFD-002023
assumed to be LBFD-002024 /
high. NO NO No TDLBFD-002024
Indicates the
threshold for high
downlink RB usage.
This parameter is
used for downlink
admission decision.
If the downlink RB
usage reported by
the MAC layer is
greater than the
value of this
parameter, the
downlink RB usage
is high. This
parameter will be
removed in later
versions. In this
still synchronized
between the M2000
and the eNodeB,
but it is no longer
Indicates the
threshold for
deciding on
whether the UL RB
usage is low. It
applies to UL
admission decision.
If the UL RB usage
reported by the
MAC layer is below LBFD-002023 /
this threshold, the TDLBFD-002023
UL RB usage is LBFD-002024 /
assumed to be low. NO NO No TDLBFD-002024
Indicates the
threshold for low
downlink RB usage.
This parameter is
used for downlink
admission decision.
If the downlink RB
usage reported by
the MAC layer is
less than the value
of this parameter,
the downlink RB
usage is low. This
parameter will be
removed in later
versions. In this
still synchronized
between the M2000
and the eNodeB,
but it is no longer
Indicates the
maximum number
of non-GBR
bearers (excluding
bearers of IP
Multimedia
Subsystem [IMS]
services) that can
be provided by a
applies to both
uplink and
downlink. This
parameter will be
removed in later
versions. In this
still synchronized
between the M2000
and the eNodeB,
but it is no longer
used internally.
Therefore, avoid
Indicates the local

ID of the cell. It
Indicates whether
RF channel
for the cell. RF
channel intelligent
shutdown can be
performed in the
cell only when this
parameter is set to
ON and certain LOFD-001039 /
conditions are met. NO NO No TDLOFD-001039
Indicates the start
time of the cell RF
channel intelligent LOFD-001039 /
shutdown. NO NO No TDLOFD-001039
Indicates the stop

time of RF channel
for the cell. If the
stop time is earlier
than or the same as
the start time, the
stop time is
assumed to be a LOFD-001039 /
time of the next day. NO NO No TDLOFD-001039
Indicates the value

by which the
reference signal
power is increased
during the RF
channel intelligent
shutdown period.
The reference
signal power
increases by the
value specified by
this parameter to
ensure coverage of
the cell. If this
parameter is set to
a value greater than
3, the value 3
applies in effect.
Otherwize,the
configuration value LOFD-001039 /
applies in effect. NO NO No TDLOFD-001039
RF channel
mode. If the current
cell load is greater
total value of the
uplink PRB usage
threshold and the
uplink PRB offset or
the total value of
the downlink PRB
usage threshold
and the downlink
PRB offset, the cell
exits the RF
channel intelligent
shutdown mode.
set to a smaller
value, the cell is
harder to enter the
RF channel
mode, which does
not facilitate
eNodeB power
saving. If this
parameter is set to
a larger value, the
cell is easier to
enter the RF
channel intelligent
shutdown mode,
which affects user
usage threshold,
the cell enters the
RF channel
mode. If the current
cell load is greater
total value of the
uplink PRB usage
threshold and the
the total value of
the downlink PRB
usage threshold
and the downlink
exits the RF
channel intelligent
shutdown mode.
set to a smaller
value, the cell is
harder to enter the
RF channel
mode, which does
not facilitate
eNodeB power
saving. If this
parameter is set to
a larger value, the
cell is easier to
enter the RF
channel intelligent
shutdown mode,
which affects user
downlink PRB offset
for RF channel
intelligent
shutdown.
If the current cell
load is greater than
or equal to the total
value of the uplink
PRB usage
threshold and the
the total value of
the downlink PRB
usage threshold
and the downlink
exits the RF
channel intelligent
shutdown mode.
set to a smaller
value, the cell is
easier to exit the
RF channel
mode and the risk
of ping-pong RF
channel shutdown
increases. If this
parameter is set to
a larger value, the
cell is harder to exit
the RF channel
mode, which affects
user services. NO NO No TDLOFD-001039
PRB offset for RF
channel intelligent
shutdown.
If the current cell
load is greater than
or equal to the total
value of the uplink
PRB usage
threshold and the
the total value of
the downlink PRB
usage threshold
and the downlink
exits the RF
channel intelligent
shutdown mode.
set to a smaller
value, the cell is
easier to exit the
RF channel
mode and the risk
of ping-pong RF
channel shutdown
increases. If this
parameter is set to
a larger value, the
cell is harder to exit
the RF channel
mode, which affects
user services. NO NO No TDLOFD-001039
Indicates the
current status about
RF channel
for a cell. NO NO Yes None
exiting cause about
RF channel
for a cell. NO NO Yes None
Indicates the local

cell within an

for the remote
interference
cancellation
algorithm. If this
the eNodeB
performs remote
interference
detection and
records in call
history record
(CHR) logs if any
interference is
detected. If this
the eNodeB does
not perform remote
interference
detection. NO NO No None
Indicates the
number of empty
symbols in an
uplink pilot timeslot
(UpPTS). If this
parameter is set to
a non-zero value N,
then no data is
transmitted within
the N symbols
starting from the
first symbol in the
UpPTS. Note that,
for any given
special subframe
configuration, the TDLBFD-001007
parameter cannot TDLBFD-00100702
be greater than the TDLOFD-001026
total number of TDLOFD-00102601
symbols contained TDLOFD-00102602
in the UpPTS. NO NO No TDLOFD-00102603
Indicates whether
to empty the last
symbol in each
uplink subframe. If
this parameter is
set to ON(On), the
last symbol in each
uplink subframe is TDLBFD-001007
emptied. If this TDLBFD-00100701
OFF(Off), the last TDLOFD-001026
symbol in each TDLOFD-00102601
uplink subframe is TDLOFD-00102602
not emptied. NO NO No TDLOFD-00102603
Indicates the local

cell identity. It
cell within an
Optimization Based
on Flow Priority.
FPIGTPUSwitch:
Indicates whether
to enable the
service
differentiation
feature using the
extended GTP-U
header containing
the FPI value. The
guideline can be
found in documents
related to the EPC
feature, which is
Wireless
Optimization Based
on Flow Priority.
DSCPRemarkSwitc
h: Indicates
whether to enable
the DSCP Remark-
based service
differentiation
feature. If
DSCPRemarkSwitc
h is set to On, the
eNodeB guarantees
differentiated quality
of service (QoS)
based on the
service type
specified by the
DSCP field in the IP
packet sent by the
PDN gateway to the
of the queue, which
is used in service
differentiation
scheduling. The
value of this
parameter is used
in calculating the
priority of a UE
during scheduling
and therefore
determines the
scheduling
probability of this
UE. The scheduling
probability and
priority of services
in a queue has a
with the value of
this parameter. This
parameter is valid
only if
FPIGTPUSwitch(FP
IGTPUSwitch) or
DSCPRemarkSwitc
h(DSCPRemarkSwi
tch) is turned on.
When
DSCPRemarkSwitc
h is turned on, this
parameter indicates
the weight of
nonP2P service
queue. NO NO No None
of the queue, which
is used in service
differentiation
scheduling. The
value of this
parameter is used
in calculating the
priority of a UE
during scheduling
and therefore
determines the
scheduling
probability of this
UE. The scheduling
probability and
in a queue has a
with the value of
parameter is valid
only if
FPIGTPUSwitch(FP
IGTPUSwitch) or
DSCPRemarkSwitc
h(DSCPRemarkSwi
tch) is turned on.
When
DSCPRemarkSwitc
h is turned on, this
parameter indicates
the weight of P2P
service queue. NO NO No None
of the queue, which
is used in service
differentiation
scheduling. The
value of this
parameter is used
in calculating the
priority of a UE
during scheduling
and therefore
determines the
scheduling
probability of this
UE. The scheduling
probability and
in a queue has a
with the value of
parameter is valid
only if
FPIGTPUSwitch(FP
IGTPUSwitch) is
turned on. NO NO No None

of the queue, which
is used in service
differentiation
scheduling. The
value of this
parameter is used
in calculating the
priority of a UE
during scheduling
and therefore
determines the
scheduling
probability of this
UE. The scheduling
probability and
in a queue has a
with the value of
parameter is valid
only if
FPIGTPUSwitch(FP
IGTPUSwitch) is
of the queue, which
is used in service
differentiation
scheduling. The
value of this
parameter is used
in calculating the
priority of a UE
during scheduling
and therefore
determines the
scheduling
probability of this
UE. The scheduling
probability and
in a queue has a
with the value of
parameter is valid
only if
FPIGTPUSwitch(FP
IGTPUSwitch) is

of the queue, which
is used in service
differentiation
scheduling. The
value of this
parameter is used
in calculating the
priority of a UE
during scheduling
and therefore
determines the
scheduling
probability of this
UE. The scheduling
probability and
in a queue has a
with the value of
parameter is valid
only if
FPIGTPUSwitch(FP
IGTPUSwitch) is
of the queue, which
is used in service
differentiation
scheduling. The
value of this
parameter is used
in calculating the
priority of a UE
during scheduling
and therefore
determines the
scheduling
probability of this
UE. The scheduling
probability and
in a queue has a
with the value of
parameter is valid
only if
FPIGTPUSwitch(FP
IGTPUSwitch) is
Indicates the local
ID of the cell. It
Indicates whether
of carriers in the
same coverage.
Intelligent power-off
of carriers in the
same coverage can
be performed only
when this
parameter is set to
ON and specific
conditions are met.
For intelligent
power-off of carriers
in the same
coverage, each
basic cell must
have its intelligent
switch enabled and
the UL or DL PRB
usage threshold set LOFD-001042 /
to 0. NO NO No TDLOFD-001042
Indicates the start
time of intelligent
in the same LOFD-001042 /
coverage. NO NO No TDLOFD-001042
Indicates the stop

time of intelligent
in the same
coverage. If the
than or the same as
the start time, the
stop time is
assumed to be a LOFD-001042 /
Indicates the
downlink PRB
threshold for
starting intelligent
in the same
coverage for the LOFD-001042 /
Indicates the
downlink PRB offset
for stopping
of carriers in the
same coverage for
the cell. The
downlink PRB
threshold for
stopping intelligent
in the same
coverage for the
cell is equal to the
sum of the downlink
PRB threshold for
in the same
coverage and the

PRB threshold for
in the same
coverage for the LOFD-001042 /
PRB offset for
in the same
coverage for the
cell. The uplink
PRB threshold for
in the same
coverage for the
cell is equal to the
sum of the uplink
PRB threshold for
in the same
coverage and the
Indicates the local

ID of the cell. It
Indicates the
interval between
periodic
measurement
reports that are
sent after a UL ICIC
measurement event
is triggered. For
details, see 3GPP
TS 36.331.
In this version, this
parameter still
supports setting
synchronization
between the M2000
and the eNodeB,
but is no longer
used internally.
Avoid using this
parameter as it will LBFD-00202202 /
be removed from TDLBFD-00202202
later versions. NO NO No LOFD-00101402
Indicates the
maximum number
of cells to be
included in each
measurement
report after a UL
ICIC measurement
event is triggered.
For details, see
3GPP TS 36.331.
parameter still
supports setting
synchronization
between the M2000
and the eNodeB,
but is no longer
used internally.
Avoid using this
Indicates the
number of periodic
measurement
reports after a UL
ICIC measurement
event is triggered.
For details, see
3GPP TS 36.331.
parameter still
supports setting
synchronization
between the M2000
and the eNodeB,
but is no longer
used internally.
Avoid using this
that the quantity to
be included is the
same as that
specified by the
TriggerQuantity
parameter. The
value BOTH
indicates that both
RSRP and RSRQ
values are included.
The measured
RSRP values are
with the load, and
therefore there is
little signal
fluctuation. The
measured RSRQ
load and are likely
real time. For
details, see 3GPP
TS 36.331.
parameter still
supports setting
synchronization
between the M2000
and the eNodeB,
but is no longer
used internally.
Avoid using this
Indicates the
evaluation of a UL
ICIC measurement
event. The quantity
can be RSRP or
RSRQ. The
measured RSRP
values are stable,
varying little with
the load, and
therefore there is
little signal
fluctuation. The
measured RSRQ
load and are likely
real time.
parameter still
supports setting
synchronization
between the M2000
and the eNodeB,
but is no longer
used internally.
Avoid using this
Indicates the
hysteresis for the
UL ICIC
measurement
event. This
parameter is used
to decrease
frequent triggering
of event evaluations
due to radio signal
fluctuations. For
details, see 3GPP
TS 36.331.
parameter still
supports setting
synchronization
between the M2000
and the eNodeB,
but is no longer
used internally.
Avoid using this
Indicates the time-
to-trigger for the UL
ICIC measurement
event. When
detecting that the
in at least one
neighboring cell
meet the entering
condition, the UE
does not send a
measurement
report to the
eNodeB
immediately.
Instead, the UE
sends a report only
when the signal
meets the entering
time-to-trigger.
parameter still
supports setting
synchronization
between the M2000
and the eNodeB,
but is no longer
used internally.
Avoid using this
for the UL ICIC
measurement
event. If this
parameter is set to
a large value, the
neighboring cell
must be
than that of the
serving cell before
a UL ICIC
measurement event
is triggered. For LBFD-00202202 /
TS 36.331. NO NO No LOFD-00101402
Indicates the local
ID of the cell. It
noise ratio (SINR).
The PF policy
schedules UEs in
ascending order of
ratio of the data
rate to the SINR.
The RR policy
schedules each UE
in sequence, and
therefore each UE
has an equal
opportunity to be
scheduled. The
EPF policy
schedules UEs in
ascending order of
priority. In EPF, the
priority of an UE is
calculated based on
the following
factors: the data
rate, average SINR,
QoS-satisfying data
rate for each
service, and service
differentiation
requirements of the
UE. The MAX C/I,
PF, and RR policies
are basic UL
scheduling policies
and supported by
the eNodeB by
default, whereas LBFD-002025 /
the EPF policy is TDLBFD-002025
intended for TDLOFD-001015
commercial use. NO NO No TDLOFD-00101502
retransmitted by
adaptive
synchronous
HARQ. If this switch
is set to
ADAPTIVE_HARQ_
SW_SEMION,
adaptive HARQ is
triggered when a
UL grant is
delivered to an
HARQ process that
is previously
suspended due to
reasons such as
resource collision,
activation of a
measurement gap,
and PDCCH
congestion. Setting
this parameter to
ADAPTIVE_HARQ_
SW_ON helps
reduce resource
consumption due to
retransmission,
increase the cell
throughput, and
prevent
retransmission
conflicts. This, on
the other hand, will
increase signaling LBFD-002006 /
overhead and TDLBFD-002006
therefore consume TDLBFD-002025
more PDCCH TDLOFD-001015
resources. NO NO No TDLOFD-00101502
IBLER of the SINR
adjustment
algorithm. A greater
parameter value
indicates a greater
SINR adjustment
value, and thus a LBFD-001006 /
higher-level MCS is TDLBFD-001006
used. NO NO No TDLOFD-001006
Indicates the ratio

of the maximum
bandwidth
resources that the
uplink scheduler
can allocate to
preallocation UEs
to the total system LOFD-00101502 /
bandwidth. NO NO No TDLOFD-00101502
Indicates the
minimum interval
between two pre-
allocations. That is,
the actual interval
between two pre-
allocations of one
UE must be longer
Indicates the data

amount pre-
allocated to each LOFD-00101502 /
user. NO NO No TDLOFD-00101502
Indicates whether
frequency hopping
(FH) is enabled or
disabled and which
FH type is used.
Hopping_OFF:
indicates that FH is
disabled.
Hopping_Type1:
indicates that
adaptive FH is
enabled and FH
type 1 is used. In
this scenario, UEs
in the cell can
determine whether
to use FH based on
the actual situation.
Hopping_Type2:
indicates that
adaptive FH is
enabled and FH
type 2 is used. In
this scenario, UEs
in the cell can
determine whether
to use FH based on
the actual situation.
Hopping_Type2_R
ANDOM: indicates
that random FH is
enabled and FH
type 2 is used. In LBFD-002025 /
this scenario, all TDLBFD-002025
UEs in the cell use LOFD-001015 /
FH. NO NO No TDLOFD-001015
Indicates the
percentage of free
shared RBs on the
PUSCH in
scheduling based
on free users and
subscribers. The
other RBs on the
PUSCH are
allocated to
subscribers. When
sufficient capacity is
available, the
percentage of RBs
occupied by free
users and that
occupied by
subscribers will
reach the preset
values. Changes in
this parameter
affect the
percentage of RBs
for free users and
that for subscribers.
The value of this
parameter cannot
be changed when TDLBFD-002023
the cell is active. NO NO No TDLBFD-002024
Indicates the data
length that the UL
scheduler assigns
to UEs that have
sent scheduling
requests. Within the
data length, the
UEs reports their
buffer status and
transmit certain LOFD-00101502 /
data. NO NO No TDLOFD-00101502
Indicates the
threshold for the
number of
consecutive zero-
payload packets
received by the
eNodeB. After
receiving
consecutive zero-
payload packets of
a number that is
equal to the value
of this parameter,
the eNodeB
performs implicit
release of semi-
persistent LOFD-00101502 /
resources. NO NO No TDLOFD-00101502
Indicates the
duration of uplink
smart preallocation
triggered by
downlink
scheduling. If
SmartPreAllocation
Switch is set to On
and this parameter
is set to 0, neither
smart preallocation
nor preallocation
takes effect. If
SmartPreAllocation
Switch is set to Off, LOFD-00101502 /
this parameter is TDLOFD-00101502
invalid. NO NO No TDLOFD-001015
Indicates the
capacity factor for
uplink enhanced
proportional fair
(EPF) scheduling.
When the eNodeB
schedules UEs with
unsatisfied GBR,
this factor affects
the scheduling
priorities of UEs
running services
with the QCI of 1, 2,
3, or 4. When the
eNodeB schedules
UEs running Non-
GBR services, this
factor affects the
scheduling priorities
of UEs running
services with the
QCI of 6, 7, 8, or 9.
In this way, this
factor can be used
to adjust the cell
capacity and
fairness among LOFD-00101502 /
Indicates the
strategy for
allocating resource
blocks (RBs) in the
uplink of the cell. If
this parameter is
set to
FS_NONFS_ADAP
TIVE, this strategy
adaptively switches
between frequency
selective
scheduling and
non-frequency
selective
scheduling. If this
parameter is set to
FS_INRANDOM_A
DAPTIVE, this
strategy adaptively
switches between
frequency selective
scheduling and
interference-
randomization-
based scheduling. NO NO No None
Indicates the local

ID of the cell. It
Indicates reserved
32-bit switch
parameter 0 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
32-bit switch
parameter 1 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
32-bit switch
parameter 2 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 2 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 3 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 4 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 5 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 6 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 7 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 8 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 9 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates the local

cell within an

used to enable or
disable inter-RAT
joint shutdown. NO NO No LOFD-001074
Indicates the start

time of inter-RAT
cell shutdown. If the
switch for inter-RAT
cell shutdown is
turned on, inter-
RAT cell shutdown
can be performed
during the period
specified by the
start time and stop
time of inter-RAT
cell shutdown. NO NO No LOFD-001074
Indicates the stop
time of inter-RAT
cell shutdown. If the
than or the same as
the start time, the
stop time is
assumed to be the
time of the next day.
If the switch for
inter-RAT cell
shutdown is turned
on, inter-RAT cell
shutdown can be
performed during
by the start time
and stop time of
inter-RAT cell
shutdown. NO NO No LOFD-001074
Indicates the
threshold number of
UEs served by the
cell. Inter-RAT cell
shutdown is
performed if
shutdown
conditions are met
and the number of
UEs served by the
cell is less than or
equal to this
threshold. The
shutdown
conditions include
the inter-RAT cell
shutdown switch,
specified duration,
and UL/DL physical
resource block
(PRB) thresholds.
In this situation, the
eNodeB
automatically hands
over or redirects the
UEs in the E-
UTRAN cell to
UTRAN cells, and
then shuts down
the carrier of the E-
UTRAN cell. NO NO No LOFD-001074
Indicates the
threshold of DL RB
usage in the cell.
Inter-RAT cell
shutdown is
performed if
shutdown
conditions are met
and the real-time
UL RB usage and
DL RB usage in the
cell are less than or
equal to the
thresholds specified
by UlPrbThd and
DlPrbThd,
respectively. The
shutdown
conditions include
the setting of the
inter-RAT cell
shutdown switch,
specified duration,
and threshold of the
number of UEs
served by the cell.
eNodeB
automatically hands
UEs in the E-
UTRAN cell to
UTRAN cells, and
then shuts down
Indicates the
threshold of UL RB
usage in the cell.
Inter-RAT cell
shutdown is
performed if
shutdown
conditions are met
and the real-time
UL RB usage and
DL RB usage in the
cell are less than or
equal to the
thresholds specified
by UlPrbThd and
DlPrbThd,
respectively. The
shutdown
conditions include
the setting of the
inter-RAT cell
shutdown switch,
specified duration,
and threshold of the
number of UEs
served by the cell.
eNodeB
automatically hands
UEs in the E-
UTRAN cell to
UTRAN cells, and
then shuts down
Indicates the local

ID of the cell. It
eNodeB instructs
UEs to use the
contention-based
random access
mode upon DL data
arrivals in the case
of out-of-
synchronization.
MaksIdxSwitch:
used to control
reuse of dedicated
preambles between
UEs.
If the switch is
turned on, the
eNodeB enables
reuse of dedicated
preambles among
UEs based on the
MaskIndex
parameter.
If the switch is
turned off, the
eNodeB allocates a
dedicated preamble
to only one UE at a
time.
BackOffSwitch:
for backoff control.
If the switch is
turned on, backoff
control is enabled.
If the switch is
turned off, backoff LOFD-002015 /
control is disabled. NO NO No TDLOFD-002015
used to enable or
disable change in
the cell-specific
SRS subframe
configuration (that
is, the adjustment
on the setting of the
SrsSubframeCfg
parameter).
If the switch is
turned on, the
algorithm
dynamically adjusts
the SRS subframe
configuration based
on the usage of cell
resources.
If the switch is
turned off, the
algorithm uses the
initial configuration
and does not
perform dynamic LBFD-002003 /
switching. NO NO No TDLBFD-002003
function. The switch
setting does not
take effect if the
LBBPc is
configured or the
cell bandwidth is
1.4 MHz or 3 MHz.
When PUCCH
flexible
configuration is
enabled, UL ICIC
and UL frequency
hopping scheduling
cannot be used.
If this switch is
turned on, an equal
number of RBs
(specified by the
PucchExtendedRB
Num parameter)
are separately
added to both ends
of the uplink band
allocated for the
PUCCH. The total
number of
extension PUCCH
RBs equals to the
PucchExtendedRB
Num parameter
value multiplied by
two. If this switch is
turned off, this
function is disabled.
This parameter is
valid only in FDD LBFD-002003 /
that is used to
enable and disable
the Active Queue
Management
(AQM) algorithm. If
this switch is set to
ON, the AQM
function is enabled
to prevent or control
congestion. The
length of the PDCP
packet queue is
maintained at a
relatively small
value to help
achieve an
appropriate trade-
off between
throughput and time
latency. If this
the AQM function is LOFD-001027 /
disabled. NO NO No TDLOFD-001027
used to control
whether to enable
optimized CQI
adjustment
algorithm in ACK
bundling mode.If
on, the optimized
CQI adjustment
algorithm is
enabled. If this
the optimized CQI
adjustment
algorithm cannot be
enabled.
TddMultiplexingCqi
AdjOptSwitch:
used to control
whether to enable
the optimized CQI
adjustment
algorithm in ACK
multiplexing mode.
If this switch is
turned on, the
optimized CQI
adjustment
algorithm is
enabled. If this
the optimized CQI
adjustment
algorithm cannot be LOFD-00101501 /
enabled. NO NO No TDLOFD-00101501

used to enable or
disable radio link
failure (RLF)
detection for UL
links. This
parameter will be
removed in later
versions. In this
still synchronized
between the M2000
and the eNodeB,
but it is no longer
used internally.
Therefore, avoid
using this
used to enable or
disable dynamic
voltage adjustment.
If the switch is
turned on, the PA
working voltage is
adjusted according
to the load of the
eNodeB. The
purpose is to
reduce power
consumption of the
PA and improve
energy efficiency of
the eNodeB. Only
FDD Cell with a
bandwidth no
smaller than 5M
supports dynamic
voltage adjustment. NO NO No LOFD-001025
turned on, low-
priority services can
be released. If this
low-priority services
cannot be released.
This parameter will
be removed in later
versions. In this
still synchronized
between the M2000
and the eNodeB,
but it is no longer
used internally.
Therefore, avoid
using this
parameter.
PreemptionSwitch:
used to enable or
disable the
preemption control
algorithm. If this
preemption can be
used when the
admission of high-
priority services
fails. If this switch is
turned off, only
emergency calls LBFD-002023 /
can be admitted to TDLBFD-002023
the system when LBFD-002024 /
resources are TDLBFD-002024
insufficient. NO NO No LOFD-00102901
an inter-RAT cell
based on load of
the inter-RAT cell,
the inter-RAT cell
must be a UTRAN
cell. If
MlbLoadInfoSwitch
and UtranMlbSwitch
are both set to On,
the UTRAN cells
with the UMTS cell
load status
parameter set to
Normal among all
the UTRAN cells
whose load status
is obtained are
considered as
target cells in load
sharing between an
E-UTRAN cell and
a UTRAN cell.
When
InterFreqBlindMlbS
witch is set to On,
the blind inter-
frequency MLB is
enabled. When
InterFreqBlindMlbS
witch is set to Off,
the blind inter- LOFD-001032 /
frequency MLB is TDLOFD-001032
disabled.InterFreqB LOFD-001044 /
lindMlbSwitch and TDLOFD-001044
InterFreqMlbSwitch LOFD-001045 /
cannot be set to On TDLOFD-001045
simultaneously. NO NO No LOFD-001057
enable the receive
SINR to converge
to the target SINR.
PdcchPcSwitch:
for PDCCH power
control. If the switch
is turned off, power
is allocated evenly
to PDCCH. If the
power allocated to
PDCCH is adjusted
dynamically.
EDlMaxTXPwrSwitc
h: Indicates the
switch for enhanced
maximum TX power
of the cell. If this
the maximum TX
power of the cell is
determined by the
reference signal
(RS) power and the
scaling factor
indexes Pa and Pb.
If this switch is
turned on, the
maximum TX power
of the cell can be
increased to LBFD-002003 /
improve the RB TDLBFD-002003
usage in the cell. LBFD-002009 /
This switch has no TDLBFD-002009
impact on the TDD LBFD-002016 /
20M or 10M cell. NO NO No TDLBFD-002016
incorporated into
inner-loop power
control for PUSCH
in dynamic
scheduling mode.
Therefore, to
enable this function,
set
InnerLoopPuschSwi
tch to On.
PowerSavingSwitch
: This switch will be
removed in later
versions. In this
of this switch is still
synchronized
between the M2000
and the eNodeB,
but it is no longer
used internally.
Therefore, avoid
using this switch.
CloseLoopOptPUS
CHSwitch: If this
closed-loop power
control is not
optimized for
PUSCH in dynamic
scheduling mode.If
on, closed-loop
power control is LBFD-002009 /
optimized for TDLBFD-002009
PUSCH in dynamic LBFD-002026 /
scheduling mode. NO NO No TDLBFD-002026

that is used to
enable or disable
the beamforming
algorithm. If the
UEs in the cell can
be served by the
beamforming
algorithm. If the
UEs in the cell
cannot be served
by the beamforming
algorithm. The
beamforming
algorithm is
disabled by default.
It must be enabled
manually if TDLOFD-001049
required. NO NO No TDLOFD-001061
delay of non-GBR
services cannot be
controlled.
EnAperiodicCqiRpt
Switch: Indicates
whether to enable
enhanced aperiodic
channel quality
indicator (CQI)
reporting. If this
the eNodeB triggers
aperiodic CQI
reporting for a UE
based on downlink
services of the UE
and the interval at
which the UE sends
periodic CQI
reports. If this
UEs under non-
frequency selective
scheduling do not
trigger aperiodic
CQI reporting
based on downlink
services and
triggers an LOFD-001016 /
aperiodic CQI TDLOFD-001016
reporting if no valid LOFD-00101502 /
periodic CQI reports TDLOFD-00101502
are sent in eight LOFD-001109 /
consecutive TDLOFD-001109
periodic CQI LOFD-001070 /
reporting periods. NO NO No TDLOFD-001070
maximum value but
the scheduling still
fails. It is
recommended that
the switch be
turned on in live
networks.
SchedulerCtrlPower
Switch:Indicates
whether the uplink
scheduler performs
scheduling without
considering power
control restrictions.
If this switch is
turned on, the
uplink scheduler
performs
scheduling without
considering power
control restrictions,
which ensures full
utilization of the
transmit power for
all UEs. If this
the uplink scheduler
considers power
control restrictions
while performing
scheduling, which LOFD-001016 /
prevents full TDLOFD-001016
utilization of the LOFD-001048 /
transmit power for TDLOFD-001048
UEs at far or LOFD-00101502 /
medium distances TDLOFD-00101502
from cell center. NO NO No TDLBFD-002025
Indicates whether
RAN sharing for
admission and
scheduling. If this
operators share
data channel
resources
according to the LOFD-001036 /
specified TDLOFD-001036
percentages. NO NO No TDLOFD-001112
the frequency-
frequency handover
is disabled. The
inter-frequency
handover can only
be triggered when
other conditions for
triggering inter-
frequency
handovers are
met.FreqPriorIFBlin
dHOSwitch:
Indicates the
frequency-priority-
based inter-
frequency blind
handover switch. If
this switch is set to
On, the frequency-
frequency blind
handover is
enabled. If this
switch is set to Off,
the eNodeB
decides whether to
perform the
frequency-priority-
based inter-
frequency handover
based on
measurements.
This switch is valid
only when
FreqPriorIFHOSwitc
h is set to On. NO NO No None

used to enable or
disable the multi-
user beamforming
algorithm.
If this switch and
the switch for the
beamforming
algorithm are both
turned on, the multi-
user beamforming
algorithm is
enabled.
If this switch is
turned off, the multi-
user beamforming
algorithm is
used to enable or
disable distance-
based handovers. If
on, distance-based
handovers are LBFD-00201804 /
allowed. If this TDLBFD-00201804
switch is turned off, LOFD-001072 /
distance-based TDLOFD-001072
handovers are LOFD-001073 /
prohibited. NO NO No TDLOFD-001073
barring algorithm. If
this parameter is
set to
ACBAR_SWITCH_
DYNAMIC, dynamic
access barring is
enabled. In this
situation, the
access probability
factor and the
average access
mobile-originated
calls are
dynamically
adjusted based on
the current cell
load. If this
parameter is set to
ACBAR_SWITCH_
STATIC, static
access barring is
also enabled. In this
situation, the
access probability
factor and the
average access
mobile-originated
calls are configured
in the access
barring information.
set to
ACBAR_SWITCH_
DISABLE, access LBFD-002009 /
barring is disabled. NO NO No TDLBFD-002009
used to enable or
disable the UL LOFD-001066 /
CoMP algorithm. NO NO No TDLOFD-001066

used to enable or
disable MRC/IRC
adaptation on LOFD-001012 /
PUSCH. NO NO No TDLOFD-001012

for SFN UL
scheduling. It is
used to set SFN UL
scheduling to joint
scheduling mode,
or auto-selection
mode between joint
scheduling and
independent
scheduling. NO NO No None

for SFN DL
scheduling. It is
used to set SFN DL
scheduling to joint
scheduling mode,
or auto-selection
mode between joint
scheduling and
independent
scheduling. NO NO No None
used to enable or
disable MRC/IRC
adaptation on
PUCCH or PRACH.
LBBPc boards do
not support this LOFD-001094 /
Indicates whether
to enable the
dynamic
discontinuous
reception (DRX)
feature. If this
the dynamic DRX
feature is applied to
newly admitted UE
to reduce the
signaling overhead
and decrease UE
power
consumption. If this
the dynamic DRX
feature is not
applied to newly
admitted UEs. The
dynamic DRX
feature applies to
carrier aggregation
(CA) UEs only
when this switch is
turned on in both
the PCell and
SCell. If the
DynDrxSwitch(Dyn
DrxSwitch) option is
selected, the
DrxAlgSwitch
parameter cannot
control DRX for
UEs in the LOFD-001105 /
synchronized state. NO NO No TDLOFD-001105
Indicates whether
to enable the high-
mobility-triggered-
idle switch. When
this parameter is
set to ENABLE,
UEs in high mobility
are released and
enter the idle mode,
and therefore the
signaling impact on
the network caused
by frequent
handovers are
reduced. When this
parameter is set to
DISABLED, UEs in
high mobility are LOFD-001106
not released. NO NO No TDLOFD-00110502
optimization is
enabled.
Before turning on
this switch, pay
attention to the
following:
(1) The cell
bandwidth must be
changed to its next
higher standard
bandwidth level.
For example, the
bandwidth of a 15-
MHz cell must be
changed to 20
MHz.
(2) It is
recommended that
this switch be
turned off if the
bandwidth of a cell
is 1.4, 3, 5, or 10
MHz.
(3) To avoid
interference to the
PUCCH from
adjacent GERAN
cells, the PUCCH
flexible
must also be turned
on, which can be
specified by
PucchFlexCfgSwitc
h under the
PucchAlgoSwitch
parameter. NO NO No MRFD-231808
used to enable or
disable the GL
dynamic power
sharing algorithm.
This algorithm can
be used when the
GSM and LTE
carriers share the
same power
amplifier. This
improves power
usage and service
quality of LTE UEs
adopting
quadrature phase
shift keying (QPSK)
as their modulation
scheme in case that
the GSM and LTE
busy hours appear
at different time
points or that the
traffic is
unbalanced. This
parameter indicates
the switch for the
GL dynamic power
sharing feature at
the LTE side. NO NO No MRFD-231806
used to enable or
disable the TDM-
based eICIC
function. If this
the TDM-based
eICIC function is
enabled. If this
the TDM-based
eICIC function is
disabled. In a
heterogeneous
network (HetNet),
this function is used
together with the
range expansion
function of the
micro to expand the
coverage of micro
cells, and increase
the number of users
absorbed by the
micro cell. To
support TDM-based
eICIC, this function
must be enabled for
both the macro and
micro cells. NO NO No LOFD-001099

used to control
whether PUCCH
resources are
allocated based on
the UL peak rate. If
on, resources are
flexibly allocated to
PUCCH. When
there is only a few
UEs, the PUCCH is
allocated with less
RBs. This
maximizes the
number of PUSCH
RBs available to
each UE. NO NO No None
used to enable or
disable the DL
CoMP algorithm. NO NO No None

used to enable or
disable the parallel
soft interference
cancellation (PSIC)
algorithm in a cell. NO NO No LOFD-001096
which the eNodeB
determines
handover policies.
When a load-based
handover to an
inter-frequency
neighboring cell in
E-UTRAN is to be
performed, the
inter-frequency
blind handover is
preferentially
performed if
InterFreqMlbBlindH
o is set to ON, and
the inter-frequency
blind handover is
not performed if
InterFreqMlbBlindH
o is set to OFF.
When a load-based
handover from an
E-UTRAN cell to a
UTRAN or GERAN
cell is to be
performed, the
inter-RAT blind
handover is
preferentially
performed if
InterRatMlbBlindHo
is set to ON, and LOFD-001032 /
the inter-RAT blind TDLOFD-001032
handover is not LOFD-001044 / TD
performed if LOFD-001044
InterRatMlbBlindHo LOFD-001045 /
is set to OFF. NO NO No TDLOFD-001045
Indicates whether
to enable load-
based adaptive
adjustment in the
adaptive
SFN/SDMA
feature.If this switch
is turned on, load-
based adaptive
adjustment is
enabled, which
increases the
proportion of joint-
scheduling UEs and
improves user
experience when
the network load is
light, and increases
the proportion of
dependent-
scheduling UEs and
ensures the
spectral efficiency
when the network
load is heavy.If this
load-based
adaptive
adjustment in the
adaptive
SFN/SDMA feature
cannot be enabled. NO NO No TDLOFD-002008
Indicates the local
ID of the cell. It
Indicates the band
division scheme
used in downlink
ICIC. The band
division in the cell is
adjusted according
to the setting of this
parameter so that
the edge bands for
neighboring cells do
not overlap. If this
parameter is set to
INVALID, the cell
does not distinguish LBFD-00202201 /
center and edge TDLBFD-00202201
bands. NO NO No LOFD-00101401
coding scheme
(MCS) indexes
within an area so
that about one third
users are
determined to be
CEUs. For
example, if an area
is covered by 155
cells and the
percentages of
users whose MCS
indexes are less
than 6 and 7 are
about 30% and
40%, respectively,
you can set this
parameter to 1.
(The G factors
corresponding to
MCS indexes 6 and
7 are 0.5 dB and
1.45 dB,
respectively.) The G
factors
corresponding to
MCS indexes 0 to
28 are 5.65, 4.5,
3.55, 2.35, 1.5,
0.5, 0.5, 1.45,
2.45, 3.4, 3.7, 4.4,
5.4, 6.3, 7.25, 8.3,
8.95, 9.6, 10.15,
11.15, 12.1, 13.15,
14.05, 15.1, 16, 17,
18.1, 19, 20.1, and
respectively. NO NO No SEFD-030200
Indicates the
reference signal
received power
(RSRP) threshold
for determining
noise-afflicted UEs
(that is, UEs that
are mainly affected
by noise) within a
network. If all RSRP
values of
neighboring cells
included in A3
reports sent by a
UE are less than or
equal to this
threshold, the event
A3 is not
considered in
interference
calculation.In
general scenarios,
the recommended
value of this
parameter is 102.
In tests for small-
scale networks, this
parameter can set
to other values. NO NO No SEFD-030200
Indicates the local
ID of the cell. It
of the DCI power
relative to the
reference signal
power when the LBFD-002003 /
PDCCH channel TDLBFD-002003
carries dedicated LBFD-002016 /
control information. NO NO No TDLBFD-002016
Indicates the local
ID of the cell. It
LBFD-002016 /
Indicates the PA TDLBFD-002016
value of cell center LBFD-00202201 /
UEs when DL ICIC TDLBFD-00202201
LBFD-002016 /
Indicates the PA TDLBFD-002016
value of cell edge LBFD-00202201 /
UEs when DL ICIC TDLBFD-00202201
Indicates the local
ID of the cell. It
Indicates the power
offset between the
PHICH TX power
and the RS power.
This offset is used
when PHICH power LBFD-002016 /
control is disabled. NO NO No TDLBFD-002016
Indicates the local
ID of the cell. It
scheduling policy.
When RR is
adopted, the
system capacity is
the smallest.
Therefore, RR is
used only to verify
the upper bound of
the scheduling
fairness in the
system. In terms of
the scheduling
effect, the PF
scheduling policy is
between the
previous two
policies. Therefore,
PF can be used to
verify the capacity,
coverage, and
fairness of the
system. The EPF
scheduling policy
supports the
features such as
user QoS, system
capacity, and
channel frequency
selection. The basic
mainly used for the
performance test
purpose. During
common operation, LBFD-002025 /
the EPF scheduling TDLBFD-002025
policy is TDLOFD-001015
Indicates the
percentage of free
shared RBs on the
PDSCH in
scheduling based
on pay-free users
and pay users. The
other RBs on the
PDSCH are
allocated to pay
users. When
sufficient capacity is
available, the
percentage of RBs
occupied by pay-
free users and that
occupied by pay
users will reach the
preset values.
Changes in this
parameter affect the
percentage of RBs
for pay-free users
and that for pay
users. Modifying
the value of this
parameter for an
active cell will lead
to the re-setup of
the cell. NO NO No None
proportional fair
(EPF) scheduling.
The value of this
parameter is used
in calculating the
priority of a UE
during scheduling
and therefore
determines the
amount of physical
resources to be
allocated to the UE
that requests the
P2P service. The
P2P service priority
has a positive
correlation with the
value of this
parameter. This
parameter is valid
only when the
service
differentiation
function is enabled.
This parameter will
be removed in later
versions. In this
still synchronized
between the M2000
and the eNodeB,
but it is no longer
used internally.
Therefore, avoid
using this
(EPF) scheduling.
The value of this
parameter is used
in calculating the
priority of a UE
during scheduling
and therefore
determines the
amount of physical
resources to be
allocated to the UE
that requests the
non-P2P service.
The priority of the
non-P2P service
has a positive
value of this
parameter. This
parameter is valid
only when the
service
differentiation
This parameter will
be removed in later
versions. In this
still synchronized
between the M2000
and the eNodeB,
but it is no longer
used internally.
Therefore, avoid
using this
Indicates the
maximum number
of layers (the rank)
in the LOFD-001001 /
implementation of TDLOFD-001001
multiple-input LOFD-001003 /
multiple-output TDLOFD-001003
(MIMO) in DL LOFD-001060 /
be basic scheduling
or differentiated
scheduling. If the
CA basic
adopted, the
eNodeB calculates
the proportional fair
(PF) scheduling
priority of each
component carrier
(CC) for a CA UE
using the total data
rates on both CCs
of this CA UE. In
this way, CA UEs
and non-CA UEs
can be allocated
similar number of
RBs. If the CA
differentiated
adopted, the
eNodeB calculates
the PF scheduling
priority of each CC
for a CA UE using
the data rate only
on the primary
component carrier
(PCC) or secondary LAOFD-00100101
component carrier LAOFD-00100102
(SCC) of this CA LAOFD-00100201
UE. In this way, CA LAOFD-00100202
UEs can achieve TDLOFD-001015
better performance TDLOFD-00101501
than non-CA UEs. NO NO No TDLOFD-00101502
Indicates the
proportion of
resources reserved
for non-GBR
services. A
proportion of
resources is
reserved
periodically to
prevent non-GBR
services from failing
to be allocated
resources. During
the periods when
resources are
reserved, resources
are scheduled
preferentially for
non-GBR services.
set to 0, resources
are not reserved for LOFD-00101502 /
non-GBR services. NO NO No TDLOFD-00101502
Indicates the
capacity factor for
downlink enhanced
proportional fair
(EPF) scheduling.
This factor affects
the scheduling
priorities of UEs
running services
with the QCI of 6, 7,
8, or 9, and
accordingly can be
used to adjust the
cell capacity and
fairness among LOFD-00101502 /
users. NO NO No TDLOFD-00101502
Indicates the
selection ratio
threshold for the
function of lowering
the modulation and
coding scheme
(MCS) index to
increase the
number of resource
blocks (RBs) with
priority for UEs
running services
with small packets.
The value 0
indicates that the
function of lowering
the MCS index is
disabled. The value
100 indicates that
the function is LOFD-00101502/
always enabled. NO NO No TDLOFD-00101502
Indicates resource
block (RB)
allocation modes
for cell edge users
(CEUs) when
downlink ICIC is
enabled. If this
parameter is set to
ALL_EDGE_USER,
RBs are allocated
to all CEUs in the
current
transmission time
interval (TTI) after
RBs are allocated
to cell center users
(CCUs). If this
parameter is set to
PART_EDGE_USE
R, RBs are LBFD-
allocated to CEUs 002025/TDLBFD-
that have not been 002025
allocated RBs after LOFD-
RBs are allocated 00101502/TDLOFD
to CCUs. NO NO No -00101502
Indicates the
scheduling policy
used when
downlink ICIC is
enabled. If this
parameter is set to
EDGE_USER_NO_
PRIO, both cell
center users
(CCUs) and cell
edge users (CEUs)
can preempt edge
bands, thereby
improving CCUs'
performance. If this
parameter is set to
EDGE_USER_PRI
O, CCUs are
scheduled at both
the center band and
the edge band only
after CEUs have LBFD-
been scheduled at 002025/TDLBFD-
the edge band, and 002025
therefore CEUs' LOFD-
performance 00101502/TDLOFD
increases. NO NO No -00101502
Indicates the
resource block
group (RBG)
allocation strategy,
which is used to
adjust spectral
efficiency and
throughput of the
cell. Consider the
situation where the
number of required
RBGs is greater
than N but less than
N+1 (where N > 1).
set to
ROUND_DOWN(R
ound Down), RBs
of N RBGs are
allocated to UEs in
the current
transmission time
interval (TTI) and
the remaining RBs
are allocated to
UEs in the next TTI.
set to LBFD-
ROUND_UP(Round 002025/TDLBFD-
Up), RBs of N+1 002025
RBGs are allocated LOFD-
to UEs in the 00101502/TDLOFD
current TTI. NO NO No -00101502
Indicates the local
ID of the cell. It
Indicates the
threshold for
triggering intra-
frequency load
balancing. Intra-
frequency load
balancing is started
if the cell load
exceeds the sum of
the threshold and
the offset, and is
stopped if the cell
load falls below the
threshold. This
parameter will be
removed in later
versions. In this
still synchronized
between the M2000
and the eNodeB,
but it is no longer
used internally.
Therefore, avoid
using this
Indicates the
threshold for
triggering inter-
frequency load
balancing. Load
balancing between
the cell and its
inter-frequency
neighboring cell is
triggered if the cell
load exceeds the
sum of this
threshold and the
offset, and is
stopped if the cell
load falls below this LOFD-001032 /
Indicates the
threshold for
triggering inter-RAT
load balancing.
Load balancing
between the cell
and its inter-RAT
neighboring cell is
triggered if the cell
load exceeds the
sum of this
threshold and the
offset, and is LOFD-001044 /
stopped if the cell TDLOFD-001044
load falls below this LOFD-001045 /
of the inter-cell load
exchange. This
parameter is
contained in the
load exchange
request message. If
the source cell
sends a load
exchange request
message containing
a period, the target
cell reports its load
to the source cell at
intervals based on
the period. If the
source cell sends
such a message
without a period,
the target cell
reports its load to
the source cell at a
default interval of
5s. In this version,
the parameter still
supports setting
synchronization
between the M2000
and the eNodeB,
but is no longer
used internally.
Avoid using this
be removed from LOFD-001032 /
later versions. NO NO No TDLOFD-001032

used in the
evaluation of
whether to trigger
load balancing. To
prevent load
fluctuations from
frequently triggering
or stopping load
balancing, an offset
needs to be set.
That is, a specific
load balancing
action is taken only
if the cell load LOFD-001032 /
exceeds the sum of TDLOFD-001032
the corresponding LOFD-001044 /
load balancing TDLOFD-001044
threshold and this LOFD-001045 /
offset. NO NO No TDLOFD-001045
Indicates the
threshold of load
difference between
two cells for load
balancing. If the
load difference
between two cells
exceeds this
threshold, the
eNodeB determines
that load imbalance
occurs and
therefore initiates
load balancing
between the cells. If
the load difference
between cells falls
below this
threshold, the
eNodeB determines LOFD-001032 /
that load imbalance TDLOFD-001032
is resolved and LOFD-001044 /
therefore stops load TDLOFD-001044
balancing between LOFD-001045 /
the cells. NO NO No TDLOFD-001045
in the cell exceeds
this threshold, and
is stopped if the
number of uplink
synchronized UEs
falls below this
threshold. The
threshold for the
number of uplink-
synchronized UEs
equals the GUI
value multiplied by
1000 and 1%. For
example, a GUI
value of 1 means
that the threshold
for the number of
uplink-synchronized
UEs is 10 (that is,
1000 x 1%), a GUI
value of 2 means
that the threshold
for the number of
uplink-synchronized
UEs is 20, and a
GUI value of 10
means that the
number of uplink-
synchronized UEs
is 100. However, if
the GUI values are
100 and 99, the
thresholds for the
numbers of uplink-
synchronized UEs
are 1 and 2, LOFD-001044 /
Indicates the
standard valid
duration for load
sharing with
universal terrestrial
radio access
network (UTRAN)
for UEs in idle
mode. The actual
duration increases
on the basis of a
standard valid
duration with the
increase of the
number of uplink- LOFD-001044 /
synchronized UEs. NO NO No TDLOFD-001044
Indicates the
control factor for the
amount of a single
load transfer. The
value of this
parameter has an
impact on the
efficiency of MLB
algorithm and the
algorithm to prevent
ping-pong load LOFD-001032 /
transfer. NO NO No TDLOFD-001032
Indicates the mode

to trigger MLB.
PRB_ONLY:
Indicates that the
inter-frequency
MLB is triggered by
PRB usage.
UE_NUMBER_ONL
Y: Indicates that the
inter-frequency
MLB is triggered by
the number of UEs
in the serving cell.
PRB_OR_UE_NUM
BER: Indicates that
blind inter-
frequency MLB is
triggered by either
the PRB usage or
the number of UEs
The
MlbTriggerMode
parameter only
applies to blind
MLB in this version. NO NO No TDLOFD-001032
Indicates the
threshold of
maximum number
of UL-synchronized
users when the
MLB is triggered by
the number of UEs
When the number
of UL-synchronized
users in the serving
cell exceeds the
sum of the
InterFreqMlbUeNu
mThd parameter
value and the
MlbUeNumOffset
parameter value,
inter-frequency
MLB is
triggered.When the
number of UL-
synchronized users
in the serving cell is
less than the
InterFreqMlbUeNu
mThd parameter
value, the inter-
frequency MLB
stops. The
InterFreqMlbUeNu
mThd parameter
only applies to blind
of the number of
UL-synchronized
users for triggering
the inter-frequency
MLB. The inter-
frequency MLB is
triggered when the
number of UL-
synchronized users
exceeds the sum of
the
InterFreqMlbUeNu
mThd parameter
value and the
MlbUeNumOffset
parameter value.
The
MlbUeNumOffset
parameter only
applies to blind
Indicates the
maximum number
of UEs that can be
handed over to the
inter-frequency cell
in the inter-
frequency MLB.
This parameter
aims to avoid too
many UEs being
handed over to the
inter-frequency cell
at a time, and
therefore the impact
on the inter-
frequency cell is
reduced. The
MlbMaxUeNum
parameter only
applies to blind
downlink or uplink is
larger than the
MlbUeSelectPrbThd
parameter value
and the PRB usage
with the load
balancing in the
reserve direction
(uplink or downlink)
is less than the
MlbUeSelectPrbThd
parameter value is
selected. When the
MlbTriggerMode
parameter is set to
UE_NUMBER_ONL
Y, the UE whose
PRB usage is less
than the
MlbUeSelectPrbThd
parameter value is
selected. When
MlbTriggerMode
parameter is set to
PRB_OR_UE_NUM
BER, a related UE
is selected based
on the scenario
where the inter-
frequency MLB is
triggered the
number of UEs in
the serving cell. The
parameter only
applies to blind

used to control
whether inter-RAT
load balancing can
be performed only
on UEs in hotspots.
This parameter is
dedicated to LTE
TDD cells. NO NO No TDLOFD-001044
Indicates the Local
ID of the cell. It
Indicates the CCE
aggregation level
for common LBFD-002003 /
Indicates the CCE

ratio adjustment
switch for the
PDCCH. If this
the resource
allocation algorithm
of the PDCCH
dynamically adjusts
the UL and DL CCE
ratios within each
transmission time
interval (TTI) based
on CCE usages in
UL and DL. If this
the UL and DL CCE
ratios are not
dynamically LBFD-002003 /
switch for dynamic
adjustment of the
number of OFDM
symbols occupied
by the PDCCH is
turned off, this
parameter indicates
the number of
OFDM symbols that
are always
occupied by the
PDCCH. If the
switch is turned on
and the bandwidth
is 1.4 MHz or 3
MHz, the PDCCH
occupies 4 or 3
OFDM symbols, in
this scenario, this
parameter cannot
be manually set.. If
the switch is turned
on and the
bandwidth is 5
MHz, 10 MHz, 15
MHz, or 20 MHz,
the eNodeB adjusts
the number of
OFDM symbols in
the range of 1, 2,
and 3 when this
parameter is set to
the default value 1,
or in the range of 2
and 3 when this
2 or 3. NO NO No TDLBFD-002003
Indicates the
percentage of the
number of virtually
loaded PDCCH
CCEs when the
PDCCH power
control switch is
turned off, or
indicates the
percentage of the
power of virtually
loaded PDCCH
CCEs when the
PDCCH power
control switch is
turned on. This
parameter is used
to analyze the
impact of the
parameter values
on PDCCH
demodulation
performance and
provide reference to
networking in LTE. NO NO No TDLBFD-002003
physical downlink
control channel
(PDCCH). If this
parameter is set to
OFF, the number of
OFDM symbols
occupied by the
PDCCH is fixed and
cannot be
dynamically
adjusted. If this
parameter is set to
ON, the number of
OFDM symbols
occupied by the
PDCCH is
dynamically
adjusted based on
the required
number of PDCCH
control channel
elements (CCEs). If
this parameter is
set to
ECFIADAPTIONON
, the number of
OFDM symbols
occupied by the
PDCCH is
dynamically
adjusted based on
the cell downlink
throughput, and the
adjustment
performance is the
best among the LBFD-002003 /
three methods. NO NO No TDLBFD-002003
Indicates the upper
limit for the CCE
usage within each
transmission time
interval (TTI). When
the switch for
dynamically
adjusting the
number of OFDM
symbols on the
PDCCH is turned
on, the parameter
setting is invalid,
that is, the CCE
usage within each
TTI cannot be
limited. This
parameter is valid LBFD-002003 /
only in TDD mode. NO NO No TDLBFD-002003
used to enable or
disable closed-loop
adjustment to the
PDCCH
aggregation level. If
on, PDCCH
aggregation level is
adjusted based on
the block error rate
(BLER) of the
PDCCH. If this
PDCCH
aggregation level is
not adjusted based
on the BLER of the LBFD-002003 /
PDCCH. NO NO No TDLBFD-002003
Indicates whether
to enable virtual
loading for Digital
PreDistortion
(DPD). This
parameter is valid
only for LTE TDD
Indicates the virtual

load type for Digital
PreDistortion
(DPD). This
parameter is valid
only for LTE TDD
Indicates the local
ID of the cell. It
Indicates the
threshold for the
low load state of the
SRI resources. The
SRI resources enter
the low load state if
the PUCCH
resource allocation
algorithm detects
that the number of
admitted UEs is
smaller than the
Indicates the local

ID of the cell. It
Indicates the time
when the cell no-
traffic detection
starts. If the stop
or the same as the
start time, the end
time is assumed to
be a time of the
next day. If the
timer for reporting
the no-traffic alarm
is not set to 0, the
eNodeB performs
the cell no-traffic
detection from the
start time to the
stop time. NO NO No LOFD-002010
Indicates the time

when the cell no-
traffic detection
stops. If the stop
or the same as the
start time, the stop
time is assumed to
be a time of the
next day. If the
timer for reporting
the no-traffic alarm
is not set to 0, the
eNodeB performs
the cell no-traffic
detection from the
start time to the
stop time. NO NO No LOFD-002010
of the timer for the
cell no-traffic
detection. If there is
no traffic in the cell
within the duration
specified by this
parameter, the
eNodeB reports the
no-access alarm
and resets the cell.
set to 0, the cell no-
traffic detection is
not performed. If
the timer for
reporting the no-
traffic alarm is set to
a non-zero value,
the eNodeB
performs the cell
no-traffic detection
from the start time
to the stop time. NO NO No LOFD-002010
Indicates the local
ID of the cell. It
Indicates the band

division scheme
used in uplink ICIC.
The band division in
the cell is changed
according to the
setting of this
parameter so that
the edge bands do
not overlap
between
neighboring cells. If
this parameter is
set to INVALID, the
cell does not LBFD-00202202 /
distinguish center TDLBFD-00202202
and edge bands. NO NO No LOFD-00101402
Indicates the local
cell within an
Indicates the
number of RBs that
are interfered by
GERAN at each
end of the LTE DL
frequency band. If
the numbers of
such RBs are
different at both
ends, the larger
number is used as
the value of this
parameter.
set to 3, three RBs
are interfered by
GERAN at each
end of the LTE DL
frequency band and
altogether six RBs
are interfered. NO NO No MRFD-231808
Indicates the SINR
threshold for
determining
whether DL RB
resources of an E-
UTRAN cell using
the LTE frequency
spectrum that
overlaps the GSM
frequency spectrum
are available. If the
result of the local
cell RSRP plus 11.2
and minus the RSSI
of the GERAN cell
that brings the
severest
interference is
greater than the
value of this
parameter, UEs can
use these RB
resources.
Otherwise, UEs
cannot use these
RB resources. UEs
measure the local
cell RSRP and the
RSSI of the
GERAN cell that
brings the severest
interference and
report the
measurement
results to the
Indicates the local

ID of the cell. It
Indicates the index
of a simulated load
configuration. One
eNodeB can store a
maximum of 10
simulated load
configurations
identified by the
indexes ranging
from 0 to 9, which
corresponds to the
RB usage
thresholds
(specified by the
SimuLoadRbThd
parameter) 10% to
100%, respectively.
That is, the RB
usage threshold of
the simulated load
configuration
identified by the
index 1 is 20%, and
that of the
simulated load
configuration
identified by the
index 4 is 50%, and
so on. The RB
usage threshold for
a simulated load
configuration can
be manually
specified by setting
the
SimuLoadRbThd
Indicates the
transmission mode
adopted by the
simulated load
configuration for
beamforming in
TDD cells,
including:
TM1: indicates
transmission mode
1 for the simulated
load configuration.
TM2: indicates
transmission mode
2 for the simulated
load configuration.
TM7: indicates
transmission mode
7 for the simulated
load configuration.
TM8: indicates
transmission mode
8 for the simulated
load configuration. NO NO No None
Indicates the
number of RBs
allocated to a
simulated load
configuration in
downlink
scheduling. NO NO Yes None
Indicates the
number of RBs
allocated for
commercial
services in downlink
Indicates the power

allocated to a
simulated load
configuration in
downlink
Indicates the power
allocated for
commercial
services in downlink
Indicates the
number of UEs
allocated by a
simulated load
configuration in
downlink
Indicates the
number of users to
be scheduled in
each transmission
time interval (TTI) in
downlink
Indicates the local
ID of the cell. It
Indicates the
modification period
coefficient for the
BCCH. BCCH
modification period
is equal to
Modification period
coefficient multiplies
Default paging
cycle, where the
BCCH modification
period and default
paging cycle are
measured in unit of
radio frames, and
the modification
period coefficient is
specified by this LBFD-002009 /
Indicates the local
ID of the cell. It
of the PCFICH
transmit power LBFD-002016 /
relative to the TDLBFD-002016
reference signal LBFD-002009 /
power. NO NO No TDLBFD-002009
of the PBCH
transmit power LBFD-002016 /
of the transmit
power for the cell
synchronization LBFD-002016 /
signals relative to TDLBFD-002016
the reference signal LBFD-002009 /
of the transmit
power for broadcast
information on the
PDSCH channel LBFD-002016 /
of the transmit
power for the
paging information LBFD-002011
on the PDSCH LBFD-002016 /
channel relative to TDLBFD-002016
the reference signal LBFD-002009 /
of the transmit
power for the
random access
responses on the
PDSCH channel LBFD-002016 /
of the pilot power LBFD-002016 /
reference signal LOFD-001047 /
power. NO NO No TDLOFD-001047
Indicates the local
ID of the cell. It
Indicates the cell
reference signal
power of each
physical antenna.
However, the cell
power delivered in TDLBFD-002016
SIB2 is that of each LBFD-002009 /
logical antenna. NO NO No TDLBFD-002009
Indicates the
scaling factor index
of the Energy Per
Resource Element
(EPRE) on the
PDSCH. This
scaling factor is
determined by the
value of this
parameter and the LBFD-002016 /
antenna port. For TDLBFD-002016
Indicates the cell

reference signal
power headroom of
each physical
Indicates the local
ID of the cell. It
Indicates the step

by which the TX
power for random
access preambles
is increased each
time after a RACH
access failure. If
multiple attempts to
access the PRACH
fail, the UE
increases the TX
power for random
access preambles
by a step specified
by this parameter
each time after an LBFD-002009 /
access failure to TDLBFD-002009
ensure successful LBFD-002010 /
access. TDLBFD-002010

UE transmit power
for the PRACH
expected by the
eNodeB when
PRACH preamble
format 0 is applied
on condition that
requirements for LBFD-002009 /
preamble detection TDLBFD-002009
performance are LBFD-002010 /
met. TDLBFD-002010
Indicates the
threshold for
determining the
size of Msg3 when
a UE selects a
preamble from
random access
preamble group A
during a random LBFD-002009 /
access procedure. TDLBFD-002009

to the starting
position of each LBFD-002009 /
PRACH in the TDLBFD-002009
frequency domain LBFD-002010 /
of the FDD cell. NO NO No TDLBFD-002010
Indicates whether
to configure the LBFD-002009 /
PRACH TDLBFD-002009
configuration index LOFD-002015 /
of the cell. NO NO No TDLOFD-002015
Indicates the
PRACH
configuration index
of the cell. If cells
are established on
an LBBPc in a
4T4R scenario, the
PRACH LBFD-002009 /
configuration TDLBFD-002009
indexes of different LBFD-002010 /
cells must be TDLBFD-002010
separated in the LOFD-002015 /
time domain. NO NO No TDLOFD-002015
Indicates the
maximum number
of preamble
transmission times. LBFD-002009 /
For details about TDLBFD-002009
this parameter, see LBFD-002010 /
that a UE waits for
message 4 (Msg4)
during a random
access (RA)
procedure. This
timer starts when a
UE initially sends or
resends message 3
(Msg3). If the UE
receives Msg4 or
the NACK to Msg3
before the timer
expires, the timer
stops. If the UE
does not receive
either message
until the timer
expires, the RA
fails, and the UE
must reinitiate an
RA procedure. For LBFD-002009 /
Indicates the
maximum number
of HARQ
retransmissions of
the message 3. For LBFD-002009 /
Indicates the local
ID of the cell. It
represents
configuration n. For
example, the value
SC0 indicates
subframe
configuration 0, and
the value SC1
indicates subframe
configuration 1. If
the cell operates in
FDD mode, the
value SC15 is
reserved. If the cell
operates in TDD
mode, the values
SC14 and SC15
are reserved. The
reserved values
cannot be used. For
the relationship
between the
subframe
configuration index
and the cell-specific
subframe
cycle/offset, see
3GPP TS 36.211. In
FDD mode, this
parameter is
permanently valid.
In TDD mode, this
parameter is valid
only if
TddSrsCfgMode is
set to
EXPERIENCE_FIR LBFD-002003 /
ST. NO NO No TDLBFD-002003
Indicates whether
the sounding
reference signal
(SRS) of a UE and
the ACK/NACK or
scheduling request
(SR) on the PUCCH
are allowed to use
the same time
resources for
simultaneous
transmission.
set to
BOOLEAN_FALSE,
simultaneous
transmission is not
allowed. In this
situation, the UE
discards the SRS
and only transmits
the ACK/NACK or
SR on the PUCCH.
set to
BOOLEAN_TRUE,
simultaneous
transmission is
allowed. In this
situation, the UE
transmits truncated
ACK/NACK or SR.
indicates that SRS
resources are
available in the cell
and can be
configured for UEs
in the cell. The
value
BOOLEAN_FALSE
indicates that no
SRS resource is
available in the cell,
and therefore no
UE in the cell is
configured with
SRS resources.
This parameter
on: (1) an FDD cell
that is established
on an LBBPc and
uses four or more
RX antennas; (2)
an FDD cell that is
established on an
LBBPc and uses
extended cyclic
prefix (CP) in the
uplink; (3) a TDD
cell established on
an LBBPc. If this
parameter does not
take effect on a cell
but SRS resources
are available in the
cell, SRS resources
can be configured LBFD-002003 /
for UEs in the cell. NO NO No TDLBFD-002003
experience (for
example,
beamforming
performance) is
used. CAPS is
short for call
attempt per second.
set to
EXPERIENCE_EN
HANCED, users
can get better DL
user experience
than that in
EXPERIENCE_FIR
ST mode. This
parameter cannot
be set to
EXPERIENCE_EN
HANCED if the
LBBPc is used. If a
cell is established
on an LBBPc but
this parameter is
set to
EXPERIENCE_EN
HANCED,
EXPERIENCE_EN
HANCED is
automatically
changed to
EXPERIENCE_FIR
ST when this
parameter takes
effect. This
parameter is valid
only in TDD mode. NO NO No TDLBFD-002003
Indicates the cell-

specific SRS
bandwidth. It
corresponds to the
srs-
BandwidthConfig
parameter in the
protocol. For
TS 36.211. NO NO Yes TDLBFD-002003
Indicates the local
ID of the cell. It
Indicates the
PHICH duration
type. If this
parameter is set to
NORMAL, the
number of OFDM
symbols occupied
by the PDCCH is
automatically
adjusted. If this
parameter is set to
EXTENDED, the
number of OFDM
symbols occupied
by the PDCCH is
fixed. Specifically,
this number is fixed
to 3 or 4 for 1.4
MHz cells and 3 for
cells with other
bandwidths. For the LBFD-002003 /
mapping between TDLBFD-002003
the type and the LOFD-001051
duration, see 3GPP LBFD-002009 /
Indicates a
coefficient that is
used to calculate
the resources used
by the PHICH for
the cell. It
corresponds to the
Ng parameter in the
protocol. LBFD-002003 /
For details on the TDLBFD-002003
usage of the Ng LOFD-001051
Indicates the local
ID of the cell. It
Indicates the
default paging
period for the cell. It
is also called the
discontinuous
reception (DRX)
period. If the EPC
specifies a DRX
period for a UE, the
UE compares this
period with the
value of this
parameter and uses
the smaller one as
its DRX period. If
the EPC does not
specify a DRX
period, the UE uses
the value of this
parameter, which is
delivered in the
system information, LBFD-002009 /
as its DRX period. TDLBFD-002009
Indicates the
number of paging
occasions (a type of
subframe) within a
paging period. This
parameter value
also indicates the
number of paging
groups within a LBFD-002009 /
paging period. For TDLBFD-002009
Indicates the
number of paging
messages
transmitted to UEs
over the air LBFD-002011 /
interface. NO NO No TDLBFD-002011
Indicates the local
ID of the cell. It
Indicates the
number of PUSCH
sub-bands.
Indicates the
hopping mode of
the PUSCH.
Indicates the
hopping offset of
the PUSCH.
Indicates whether
group hopping of
the PUSCH is
enabled.
Indicates the group
assignment of the
PUSCH.
Indicates whether
sequence hopping
of the PUSCH is
enabled.
Indicates the cyclic

shift of the PUSCH.
Indicates whether
64QAM of the
PUSCH is enabled.
Indicates the local
ID of the cell. It
Indicates the
interval between
cyclic shifts used for
the PUCCH. The
interval between
cyclic shifts used for
the PUCCH can be
acquired based on
the average delay
spread in the cell,
where the average
delay spread is
acquired based on
the networking
environment. The
parameter value
DS1_DELTA_SHIF
T is not supported
by the LBBPc. If a
cell is established
on an LBBPc but
this parameter is
set to
DS1_DELTA_SHIFT
, the value of this
parameter is
automatically
changed to
DS2_DELTA_SHIF
T when this
parameter takes
effect. For details,
Indicates the
number of resource
indexes allocated to
SRI and semi-
persistent ACK at
the RRC layer for
the FDD cell. If this
parameter is set to
0, UEs may fail to LBFD-002003 /
access the cell. NO NO No TDLBFD-002003
Indicates the
number of RBs
allocated to the CQI
at the RRC layer of LBFD-002003 /
FDD cell. NO NO No TDLBFD-002003
Indicates the total
number of RBs at
the two ends of the
system band that
are reserved for the
PUSCH. This
parameter is valid
only when the
PUCCH flexible
(PucchFlexCfgSwitc
h) is turned on. The
parameter setting
must consider the
number of RBs
used by the
PRACH, SRS, and
PUCCH as well as
the number of RBs
compressed. If the
parameter setting
exceeds the system
bandwidth
capability and
accordingly affects
the preceding RB
resource allocation,
the cell cannot be LBFD-002003 /
established TDLBFD-002003
successfully. NO NO No LOFD-001093
Indicates the ID of
the local cell. It
cell within an
country code (MCC)
of the CDMA2000
1xRTT cell.
A public land mobile
network (PLMN) ID
is comprised of an
MCC and a mobile
network code
(MNC).
The MCC consists
of three digits.
The MNC consists
of two or three
digits.
For example, if the
MCC is 123 and the LOFD-001035 /
MNC is 45, the TDLOFD-001035
PLMN ID is 12345. YES YES No TDLOFD-001090

network code
(MNC) of the
CDMA2000 1xRTT
cell.
network (PLMN) ID
is comprised of a
mobile country
code (MCC) and an
MNC.
The MCC consists
of three digits.
The MNC consists
of two or three
digits.
For example, if the
of the reference
CDMA2000 1xRTT
cell. The cell ID and
sector ID together
uniquely identify a
CDMA2000 cell in
the mobile
switching center
(MSC). In the
CDMA2000 1xRTT
network, a cell ID
cell within the
mobile switching
center (MSC). A cell LOFD-001035 /
ID consists of 12 TDLOFD-001035
bits. NO YES No TDLOFD-001090

ID of the reference
CDMA2000 1xRTT
sector ID together
uniquely identify a
CDMA2000 cell in
the mobile
switching center
(MSC). A sector ID
is unique in a LOFD-001035 /
CDMA2000 cell and TDLOFD-001035
consists of four bits. NO YES No TDLOFD-001090
Indicates the
system ID of the
reference
CDMA2000 1xRTT
cell. A system ID is
allocated to each
local CDMA mobile
network and is used
to determine
whether a UE is in
the roaming state.
For details about LOFD-001035 /
this parameter, see TDLOFD-001035
3GPP2 C.S0005. NO YES No TDLOFD-001090
Indicates the
network ID of the
reference
CDMA2000 1xRTT
cell. A base station
is a cellular system
and a member of
the network. A
network is a subset
of a system that is
identified by a
system ID. A
network in a system
is identified by a
network ID. A
system ID and a
network ID together
uniquely identify a
network. System ID
0 and network ID 0
indicate all base
stations outside a
specified network
and are reserved
values. Network ID
65535 is also
reserved; this ID
indicates that the
roaming status of
UEs is non-roaming
in the whole system
no matter what the
network ID is. For
details, see the LOFD-001035 /
description of NID TDLOFD-001035
in 3GPP2 C.S0005. NO YES No TDLOFD-001090
cell belongs. The
value begins with
0x followed by a
maximum of 6
hexadecimal
characters (0 to 9,
and A to F), for
example, 0x123A.
The hexadecimal
character string
cannot begin with 0,
for example, the
value cannot be
0x0123A. An MSC
ID uniquely
identifies an MSC
and is determined
by the operator.
MSCID is defined in
TIA/EIA-41.5-D and
consists of
MarketID (2 bytes)
and SwitchNo (1
byte). MarketID is
described in
TIA/EIA TSB29 and
can be defined by
the operator. It can
be the SID or
another ID that can
differentiate
operators.
SwitchNo consists
of a group of cell
addresses and LOFD-001035 /
circuit resource IDs TDLOFD-001035
under MarketID. NO NO No TDLOFD-001090
Indicates whether
to configure a band
class for a UE. If
this parameter is
set to CFG, the UE
sends a location
update request to
the CDMA2000
1xRTT system
when the UE finds
that the current
band class is
different from the
band class pre-
registered the last
time. For details,
see the description
of
BAND_CLASSInclu LOFD-001035 /
ded in 3GPP2 TDLOFD-001035
C.S0097. NO NO No TDLOFD-001090
Indicates the band
class that a UE can
pre-register at. If
this parameter is
set to CFG, the UE
sends a location
update request to
the CDMA2000
1xRTT system
when the UE finds
that the current
band class is
different from the
band class pre-
registered the last
time. For details,
see the description LOFD-001035 /
of BAND_CLASS in TDLOFD-001035
3GPP2 C.S0097. NO NO No TDLOFD-001090
Indicates whether
the CDMA2000
1xRTT CSFB
registration
parameters need to
be set. If this
parameter is set to
CFG, the
CDMA2000 1xRTT
circuit-switched
fallback (CSFB)
registration
parameters need to
be set. If this
parameter is set to
NOT_CFG, the
CDMA2000 1xRTT
CSFB registration
parameters do not
need to be set and
the parameters are LOFD-001035 /
not broadcast in TDLOFD-001035
SIB8. NO NO No TDLOFD-001090
Indicates whether
multiple system IDs
(SIDs) can be
stored. That is,
whether UEs are
allowed to store
SID_NID_LIST that
contains different
SIDs. For details
about this LOFD-001035 /
parameter, see TDLOFD-001035
Indicates whether
multiple network
IDs (NIDs) can be
stored. That is,
whether UEs are
allowed to store
SID_NID_LIST that
contains the same
SID but different
NIDs. For details
Indicates whether a
non-roaming UE is
allowed to register
at the current
system. If this
parameter is set to
BOOLEAN_TRUE
and
MOB_TERM_HOM
E in the UE is set to
BOOLEAN_TRUE,
the UE can
automatically
register at the
current system.
MOB_TERM_HOM
E indicates whether
a UE can be called
in the home PLMN.
Automatic
registration can be
power-on
registration, power-
off registration,
periodic
registration, zone-
based registration,
or distance-based
registration. For
details, see the
description of LOFD-001035 /
homeReg in 3GPP TDLOFD-001035
Indicates whether a
UE roaming from
another system is
allowed to register
at the current
system. If this
parameter is set to
BOOLEAN_TRUE
and
MOB_TERM_FOR_
SID in the UE is set
to 1, the UE can
automatically
register at the
current system. For
details, see the
foreignSIDReg in TDLOFD-001035
Indicates whether a
UE roaming from
another network is
allowed to register
at the current
network. If this
parameter is set to
BOOLEAN_TRUE,
the UE can
automatically
register at the
current network. For
details, see the
foreignNIDReg in TDLOFD-001035
Indicates whether a
UE can initiate
automatic
registration when
some of its
parameters are
changed or when it
enters a new
system. If this
parameter is set to
BOOLEAN_TRUE,
automatic
registration is
allowed. If this
parameter is set to
BOOLEAN_FALSE,
automatic
registration is not
allowed. For details,
of parameterReg in TDLOFD-001035
Indicates whether
power-on
registration is
allowed, that is,
whether a UE can
initiate automatic
registration
immediately after
being powered on
and receiving a
system message. If
this parameter is
set to
BOOLEAN_TRUE,
the UE can initiate
automatic
registration. If this
parameter is set to
BOOLEAN_FALSE,
the UEs cannot
initiate automatic
registration. To
prevent frequent
registration due to
immediate power-
off after power-on,
the UE can initiate
registration 20
seconds after it
enters the idle
mode. For details,
of powerUpReg in TDLOFD-001035
Indicates the
CDMA2000 1xRTT
registration period.
set to 0, the UE
does not perform
time-based
parameter is set to
a value in the range
from 29 to 85, the
period can be
calculated using the
following formula:
[2^(Registration
period/4)] 0.08s.
registrationPeriod in TDLOFD-001035
Indicates the
CDMA2000 1xRTT
registration zone.
This parameter, the
system ID, and the
network ID together
uniquely identify a
CDMA2000
registration zone.
This parameter is
used for
registration-zone-
based registration.
Registration zones
are planned based
on actual network
conditions. For
details, see the
registrationZone in TDLOFD-001035
Indicates the total
number of
CDMA2000 1xRTT
registration zones
to be retained. If
this parameter is
set to 0,
registration-zone-
based registration
is disabled. If this
parameter is set to
a value greater than
1, UEs do not
frequently switch
between
registration zones.
However, this
results in delayed
location updates.
totalZone in 3GPP TDLOFD-001035
any message from
a registration zone
within the timer
length, the UE
deletes this
registration zone
code. This timer
takes effect only if
the number of
retained registration
zones is not 0. This
parameter is used
for registration-
zone-based
registration. The
parameter values 0
to 7 indicate 1, 2, 5,
10, 20, 30, 45, and
60 minutes,
respectively. To
reduce the impact
on paging when the
number of retained
registration zones is
greater than 1, you
are advised to set
this timer to a small
value, for example,
1. If the number of
retained registration
zones is 1, this
timer does not take
much effect. For
details, see the
zoneTimer in 3GPP TDLOFD-001035
Indicates whether a
CDMA2000 1xRTT
UE needs to initiate
registration during
power-off. For
details, see the
powerDownReg-r9 TDLOFD-001035
in 3GPP TS 36.331. NO NO No TDLOFD-001090
Indicates whether
access class
barring for LOFD-001035 /
is configured. NO NO No TDLOFD-001090
access overload
classes 0 to 9 and
determines the
threshold P for
performing
continuity checks
by UEs. A UE must
pass the continuity
check to access the
network. For
details, see IS95A-
C6. In each timeslot
after the RS, the
UE performs a
pseudorandom
continuity check
based on
parameter P. During
each timeslot, a
random value RP
ranging from 0 to 1
is generated. If RP
is less than P, the
UE passes the
check. Then, the
UE sends the first
probe of the access
sequence in the
timeslot. If the
check fails, the UE
needs to perform
the check in the
next timeslot. For
details, see the
description of ac- LOFD-001035 /
Barring0to9-r9 in TDLOFD-001035
Indicates the
persistence value
for access overload
class 10. The
persistence values
for emergency call
access overload
classes 10 to 15
determine the
threshold P for
performing
continuity checks
by UEs. For details,
of ac-Barring10-r9 TDLOFD-001035
Indicates the
persistence value
for access overload
class 11. The
persistence values
for emergency call
access overload
classes 10 to 15
determine the
threshold P for
performing
continuity checks
Indicates the
persistence value
for access overload
class 12. The
persistence values
for emergency call
access overload
classes 10 to 15
determine the
threshold P for
performing
continuity checks
Indicates the
persistence value
for access overload
class 13. The
persistence values
for emergency call
access overload
classes 10 to 15
determine the
threshold P for
performing
continuity checks
Indicates the
persistence value
for access overload
class 14. The
persistence values
for emergency call
access overload
classes 10 to 15
determine the
threshold P for
performing
continuity checks
Indicates the
persistence value
for access overload
class 15. The
persistence values
for emergency call
access overload
classes 10 to 15
determine the
threshold P for
performing
continuity checks
Indicates the
persistence
amendment value
sent in access
attempt messages.
In the access
attempt indicated
by the message,
the value of (P x 2 -
MSG_PSIST) and
RP will be
compared. For
details, see ac- LOFD-001035 /
BarringMsg-r9 in TDLOFD-001035
Indicates the
autonomously
registered
persistence
amendment value
for the access
barring factor. For
BarringReg-r9 in TDLOFD-001035
Indicates the
persistence value
for emergency calls
by UEs belonging
to access overload
classes 0 to 9. If
PSISTEMGINCL is
set to 0, AcBarEmg
is invalid. If
PSISTEMGINCL is
set to 1, set
AcBarEmg based
on whether UEs
belonging to access
overload classes 0
to 9 are allowed to
send emergency
call requests on the
access channel. If
allowed, set
AcBarEmg to 0. If
not allowed, set
AcBarEmg to 7. For
BarringEmg-r9 in TDLOFD-001035
Indicates whether
to configure the
latest CDMA2000
1xRTT protocol
revision supported
by the eNodeB. For
details about this LOFD-001035 /
CDMA2000 1xRTT
protocol revision
supported by the
eNodeB. If the
latest protocol
revision is required
by some features,
change the protocol
revision as
required. For details
Indicates whether
to configure the
CDMA2000 1xRTT
minimum protocol
revision level. For
Indicates the
minimum protocol
revision that UEs
need to support to
access the system.
Indicates whether
to include
authentication. For
Indicates whether
to perform
authentication. For
Indicates whether
to configure the
maximum number
of alternative
service options. For
Indicates the
maximum number
of alternative
service options that
can be included in
the Origination
Message (ORM)
and Page
Response Message
(PRM). This
parameter is valid
for UEs with
MOB_P_REV
greater than or
equal to 6. For
Indicates whether
to configure the
preferred access
channel MS ID
type. For details
Indicates the
preferred access
channel MS ID
type. For details
Indicates whether
the mobile country
code (MCC) is
delivered. If this
parameter is set to
CFG, the MCC is
delivered at
CDMA2000 1xRTT
parameter
registration. For
Indicates whether
the mobile network
code (MNC) is
delivered. If this
parameter is set to
CFG, the MNC is
delivered at
CDMA2000 1xRTT
parameter
registration. For
Indicates whether
IMSI_Ts are
supported. For
Indicates whether
15-digit IMSI_T are
supported. If
IMSI_T_SUPPORT
ED in ESPM is set
to 1 and the IMSI_T
is correctly set in
the UE, the UE
reports IMSI_T. If
IMSI_T_SUPPORT
ED is set to 1 but
the IMSI_T is not
set in the UE, the
UE may report an
incorrect IMSI.
When you modify
this parameter,
ensure that the true
IMSI is correctly set
for the UE. For
Indicates whether
power control
parameters are
carried by UEs from
the LTE network to
the CDMA2000
1xRTT network. For

setpoint for RC3
used for UE-
performed forward
FCH outer-loop
power control. For

setpoint for RC4
used for UE-
performed forward
FCH outer-loop
power control. For
setpoint for RC5
used for UE-
performed forward
FCH outer-loop
power control. For

setpoint for RC11
used for UE-
performed forward
channel outer-loop
power control. For

setpoint for RC12
used for UE-
performed forward
FCH outer-loop
power control. For
Indicates whether
to configure the
pilot PN sequence
offset index
increment. For
Indicates the pilot
pseudo noise (PN)
sequence offset
index increment.
The value of this
parameter is a
greatest common
divisor for pilot PN
sequence offsets of
all adjacent base
stations. For a
given pilot PN
sequence offset
index increment,
the number of PNs
available in the
system is 512
divided by the value
of this parameter.
Indicates whether
the leap second is
included in a pre-
registration
message. When
this parameter is
set to CFG, the
eNodeB
automatically
calculates the leap LOFD-001035 /
second value based TDLOFD-001035
on the system time. NO NO No TDLOFD-001090
Indicates whether
to configure the
time zone. If this
parameter is set to
CFG, the eNodeB
uses the DST
information
configured by
running the SET TZ
command. For
details, see the
LTM_OFF_Included TDLOFD-001035
in 3GPP2 C.S0097. NO NO No TDLOFD-001090
Indicates whether
to configure the
daylight saving time
(DST) information.
set to CFG, the
eNodeB uses the
DST information
configured by
running the SET TZ
command. For
details, see the
DAYLT_Included in TDLOFD-001035
Indicates whether
to configure the
GCSNA L2
acknowledge timer.
If a timer length
needs to be
specified, set this
parameter to CFG.

of the GCSNA L2
timer for responding
to the
GCSNA1xCircuitSe
rvice message. It is
recommended that
this parameter be
set to a value
smaller than the
value of
GcsnaSeqContextTi
mer. For details,
see the description
of LOFD-001035 /
GCSNAL2AckTimer TDLOFD-001035
in 3GPP2 C.S0097. NO NO No TDLOFD-001090
Indicates whether
to configure the
GCSNA sequence
context timer. If a
timer length needs
to be specified, set
this parameter to
CFG. For details
of the timer for
retransmitting the
GCSNA1xCircuitSe
rvice message.
After the timer
expires, the
message will not be
retransmitted. It is
recommended that
this parameter be
set to a value
greater than the
value of
GcsnaL2AckTimer.
description of
GCSNASequenceC LOFD-001035 /
ontextTimer in TDLOFD-001035
Indicates the ID of
the local cell. It
cell within an
Indicates the value
for SectorID104 of
the neighboring
CDMA2000 high
rate packet data
(HRPD) cell. The
value begins with
0x followed by a
maximum of 26
hexadecimal
characters (0 to 9,
and A to F), for
example, 0x123A.
The hexadecimal
character string
for example, the
value cannot be
0x0123A.
SECTORID128
uniquely identifies
an EV-DO sector in
the global scope
and is comprised of
SECTORID104 and
SECTORID24.
SECTORID104
subnetwork in the
global scope and
SECTORID24
uniquely identifies
an EV-DO sector in LOFD-001021 /
the subnetwork. YES YES No TDLOFD-001021
Indicates the value
for SectorID24 of
the neighboring
CDMA2000 high
rate packet data
(HRPD) cell. The
value begins with
0x followed by a
maximum of six
hexadecimal
characters (0 to 9,
and A to F), for
example, 0x123A.
The hexadecimal
character string
for example, the
value cannot be
0x0123A.
SECTORID128
uniquely identifies
an EV-DO sector in
the global scope
and is comprised of
SECTORID104 and
SECTORID24.
SECTORID104
subnetwork in the
global scope and
SECTORID24
uniquely identifies
Indicates the band

class on which the
neighboring
CDMA2000 high
rate packet data
(HRPD) cell
operates. For
details about this
parameter, see LOFD-001021 /
Indicates the
frequency on which
the neighboring
CDMA2000 high
rate packet data
(HRPD) cell
operates. For
details about this
Indicates whether
to permit or prohibit
handovers from the
local cell to the LOFD-001021 /
neighboring cell. NO NO No TDLOFD-001021
Indicates whether
removal of the LOFD-001021 /
relationship by LOFD-002002 /
ANR. NO NO No TDLOFD-002002
Indicates whether
ANR with
neighboring
CDMA2000 high LOFD-001021 /
rate packet data TDLOFD-001021
(HRPD) cells is LOFD-002002 /
of the local cell. NO NO No TDLOFD-001021
Indicates the name

of the neighboring
set to
AUTO_MODE, the
ANR-related MOs
can be modified or
removed by the
user or based on
the ANR algorithm.
The MO removal is
successful even if
the MO does not
exist. An MO can
be added both by
the user and based
on the ANR
algorithm. If an
existed MO is to be
added, the MO is
modified when the
user performs the
addition, but it
cannot be added
based on the ANR
algorithm. When
the ANR-related
MOs are
automatically added
based on the ANR
algorithm, this
parameter is set to
AUTO_MODE by
default. When the
ANR-related MOs
are added by the
user, this parameter LOFD-001021 /
can be set to TDLOFD-001021
AUTO_MODE or LOFD-002002 /
MANUAL_MODE. NO NO No TDLOFD-002002
Indicates the ID of
the local cell. It
cell within an
country code (MCC)
of the CDMA2000
high rate packet
data (HRPD) pre-
registration
parameter.
network (PLMN) ID
is comprised of an
MCC and a mobile
network code
(MNC).
The MCC consists
of three digits.
The MNC consists
of two or three
digits.
For example, if the
MCC is 123 and the
MNC is 45, the LOFD-001021 /

network code
(MNC) of the
CDMA2000 high
rate packet data
(HRPD) pre-
registration
parameter.
network (PLMN) ID
is comprised of a
mobile country
code (MCC) and an
MNC.
The MCC consists
of three digits.
The MNC consists
of two or three
digits.
For example, if the
MCC is 123 and the
Indicates whether a
UE without valid
pre-registration is
allowed to initiate
high rate packet
data (HRPD) pre-
parameter is set to
BOOLEAN_TRUE,
the UE is allowed to
initiate the pre-
parameter is set to
BOOLEAN_FALSE,
the UE is not
allowed to initiate
the pre-registration.
For details about
this parameter, see LOFD-001021 /
Indicates whether
the measurement
configuration pre-
registration
parameter is LOFD-001021 /
configured. NO NO No TDLOFD-001021
Indicates whether
measurement
configuration pre-
registration is LOFD-001021 /
allowed. NO NO No TDLOFD-001021
Indicates the ID of
the pre-registration
CDMA2000 HRPD
zone. This
parameter is used
to control the re-
registration of the
UE and is valid only
when pre-
registration is
allowed. For details
about this
Indicates whether
the secondary pre-
registration zone ID
0 is configured. If
this parameter is
set to CFG, the
secondary pre-
0 exists. If this
parameter is set to
NOT_CFG, the
secondary pre-
0 does not exist.
For details about
Indicates the
secondary pre-
used to control the
re-registration of
the UE. For details
about this
Indicates whether
the secondary pre-
1 is configured. If
this parameter is
set to CFG, the
secondary pre-
1 exists. If this
parameter is set to
NOT_CFG, the
secondary pre-
1 does not exist.
For details about
Indicates the
secondary pre-
used to control the
re-registration of
the UE. For details
about this
Indicates the ID of
the local cell. It
cell within an
country code (MCC)
of the reference
CDMA2000 high
rate packet data
(HRPD) cell.
network (PLMN) ID
is comprised of an
MCC and a mobile
network code
(MNC).
The MCC consists
of three digits.
The MNC consists
of two or three
digits.
For example, if the
MCC is 123 and the

network code
(MNC) of the
reference
CDMA2000 high
rate packet data
(HRPD) cell.
network (PLMN) ID
is comprised of a
mobile country
code (MCC) and an
MNC.
The MCC consists
of three digits.
The MNC consists
of two or three
digits.
For example, if the
MCC is 123 and the
Indicates the value
for SectorID104 of
the reference
CDMA2000 high
rate packet data
(HRPD) cell. The
value begins with
0x followed by a
maximum of 26
hexadecimal
characters (0 to 9,
and A to F), for
example, 0x123A.
The hexadecimal
character string
for example, the
value cannot be
0x0123A.
SECTORID128
uniquely identifies
an EV-DO sector in
the global scope
and is comprised of
SECTORID104 and
SECTORID24.
SECTORID104
subnetwork in the
global scope and
SECTORID24
uniquely identifies
an EV-DO sector in
the subnetwork. For
C.S0024. YES YES No TDLOFD-001021
Indicates the value
for SectorID24 of
the reference
CDMA2000 high
rate packet data
(HRPD) cell. The
value begins with
0x followed by a
maximum of six
hexadecimal
characters (0 to 9,
and A to F), for
example, 0x123A.
The hexadecimal
character string
for example, the
value cannot be
0x0123A.
SECTORID128
uniquely identifies
an EV-DO sector in
the global scope
and is comprised of
SECTORID104 and
SECTORID24.
SECTORID104
subnetwork in the
global scope and
SECTORID24
uniquely identifies
an EV-DO sector in
the subnetwork. For
C.S0024. YES YES No TDLOFD-001021
(HRPD) cell that a
UE in the E-UTRAN
cell can pre-register
at. An E-UTRAN
cell may overlap
multiple CDMA2000
HRPD cells, for
example, when
three E-UTRAN
sectors and six
CDMA2000 HRPD
sectors cover the
same area.
Therefore, multiple
CDMA2000 HRPD
sector IDs can be
specified for an E-
UTRAN cell, with
each CDMA2000
HRPD sector ID
configured with a
selection ratio.
During UE pre-
registration,
CDMA2000 HRPD
sector IDs are
selected based on
historical selection
ratios. Considering
the cellular network
structure, a
maximum of six
CDMA2000 HRPD
sector IDs can be
configured for a UE LOFD-
in the E-UTRAN 001021/TDLOFD-
cell. NO YES No 001021

cell within an
Indicates the
neighboring
CDMA2000 band
class. Signals on a
frequency within the
band class can be
obtained by UEs. LOFD-001035 /
For details, see the TDLOFD-001035
BandclassCDMA20 LOFD-001021 /
00 IE defined in TDLOFD-001021
3GPP 36.331 6.3.4. YES YES No TDLOFD-001090
Indicates the
neighboring
CDMA2000
frequency of the
serving cell. For
details, see the IE LOFD-001035 /
CDMA2000- TDLOFD-001035
CarrierInfo in the LOFD-001021 /
3GPP 36.331 6.3.4 TDLOFD-001021
protocol. YES YES No TDLOFD-001090
Indicates the
frequency-specific
offset of the local
cell to the
neighboring
CDMA2000 cell on
the frequency. A
parameter leads to
of triggering
measurement
reports. For details,
see the Q- LOFD-001035 /
OffsetRangeInterRA TDLOFD-001035
T IE defined in LOFD-001021 /
section 6.3.4 in TDLOFD-001021
Indicates whether
to set the size of
the CDMA2000
search window. If LOFD-001035 /
this parameter is TDLOFD-001035
set to NOT_CFG, LOFD-001021 /
the default size (8) TDLOFD-001021
Indicates the
search window size
to be used by the
UE for searching for
the pilots of the
neighboring
CDMA2000 cells. LOFD-001035 /
MeasObjectCDMA2 LOFD-001021 /
frequency.If the
eNodeB selects
target frequencies
based on frequency
priorities in
handovers to
CDMA2000, this
parameter indicates
the priority of the
CDMA2000
frequency, whose
value has a positive
probability of the
neighboring
CDMA2000
frequency being
selected as the
target frequency.If
the eNodeB selects
target frequencies
based on scaling
factors in
handovers to
CDMA2000, this
parameter indicates
the scaling factor of
the CDMA2000
frequency, whose
value has a positive
probability of the
neighboring LOFD-001035 /
CDMA2000 TDLOFD-001035
frequency being LOFD-001021 /
selected as the TDLOFD-001021
target frequency. NO NO No TDLOFD-001090
country code of the
external cell.
A PLMN ID is
comprised of an
MCC and an MNC.
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
For example, if the LOFD-001036 /
MCC is 123 and the TDLOFD-001036
MNC is 45, then the LOFD-001037 /

network code of the
external cell.
A PLMN ID is
comprised of an
MCC and an MNC.
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
Indicates the
eNodeB identity of
the external E-
UTRAN cell. It
uniquely identifies
an eNodeB within a
PLMN. The 28-bit
E-UTRAN cell
identity is
comprised of the
cell identity and the
eNodeB identity
(represented by the
most significant 20
bits). The cell global
identity (CGI) of an
E-UTRAN cell is
comprised of the E-
UTRAN cell identity
and the PLMN ID.
For details, see
Indicates the cell
identity of the
external E-UTRAN
cell. It uniquely
identifies a cell
within an eNodeB.
The 28-bit E-
UTRAN cell identity
is comprised of the
cell identity
(represented by the
least significant
eight bits) and the
eNodeB identity.
The cell global
E-UTRAN cell is
comprised of the E-
UTRAN cell identity LOFD-001036 /
and the PLMN ID. TDLOFD-001036

country code of the
external E-UTRAN
cell that is shared
among multiple
operators.
A PLMN ID is
comprised of an
MCC and an MNC.
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
network code of the
external E-UTRAN
cell that is shared
among multiple
operators.
A PLMN ID is
comprised of an
MCC and an MNC.
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
Indicates the
identity of the
external GERAN LOFD-001036 /
cell. It uniquely TDLOFD-001036
identifies a GERAN LOFD-001037 /
cell within a PLMN. YES YES No TDLOFD-001037
LOFD-001036 /
Indicates the LAC TDLOFD-001036
of the external LOFD-001037 /
GERAN cell. YES YES No TDLOFD-001037

country code of the
external cell.
A PLMN ID is
comprised of an
MCC and an MNC.
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
network code of the
external cell.
A PLMN ID is
comprised of an
MCC and an MNC.
The MCC consists
of three digits.
The MNC consists
of two to three
digits.

country code of the
external GERAN
cell that is shared
among multiple
operators.
A PLMN ID is
comprised of an
MCC and an MNC.
The MCC consists
of three digits.
The MNC consists
of two to three
digits.

network code of the
external GERAN
cell that is shared
among multiple
operators.
A PLMN ID is
comprised of an
MCC and an MNC.
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
country code of the
external UTRAN
cell.
A PLMN ID is
comprised of an
MCC and an MNC.
The MCC consists
of three digits.
The MNC consists
of two to three
digits.

network code of the
external UTRAN
cell.
A PLMN ID is
comprised of an
MCC and an MNC.
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
Indicates the RNC

ID of the external
UTRAN cell. The
28-bit UTRAN cell
ID comprises the
RNC cell ID and the
RNC ID that are
represented by the
least significant 16
bits and the most
significant 12 bits,
respectively. The
formula for
calculating the
UTRAN cell ID is as
follows: UTRAN cell
ID = RNC ID x LOFD-001036 /
65536 + RNC cell TDLOFD-001036
ID. For details, see LOFD-001037 /
Indicates the RNC
cell ID of an
external UTRAN
cell. It uniquely
identifies a cell
within an RNC. The
28-bit UTRAN cell
ID is comprised of
the RNC cell ID and
the RNC ID that are
represented by the
bits and the most
respectively. The
formula for
calculating the
UTRAN cell ID is as
follows: UTRAN cell

country code of the
external UTRAN
cell that is shared
among multiple
operators.
A PLMN ID is
comprised of an
MCC and an MNC.
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
network code of the
external UTRAN
cell that is shared
among multiple
operators.
A PLMN ID is
comprised of an
MCC and an MNC.
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
Indicates the value

for SectorID104 of
the external
CDMA2000 high
rate packet data
(HRPD) cell. The
value begins with
0x followed by a
maximum of 26
hexadecimal
characters (0 to 9,
and A to F), for
example, 0x123A.
The hexadecimal
character string
for example, the
value cannot be
0x0123A.
SECTORID128
uniquely identifies
an EV-DO sector in
the global scope
and is comprised of
SECTORID104 and
SECTORID24.
SECTORID104
subnetwork in the
global scope and
SECTORID24
uniquely identifies
Indicates the value
for SectorID24 of
the external
CDMA2000 high
rate packet data
(HRPD) cell. The
value begins with
0x followed by a
maximum of six
hexadecimal
characters (0 to 9,
and A to F), for
example, 0x123A.
The hexadecimal
character string
for example, the
value cannot be
0x0123A.
SECTORID128
uniquely identifies
an EV-DO sector in
the global scope
and is comprised of
SECTORID104 and
SECTORID24.
SECTORID104
subnetwork in the
global scope and
SECTORID24
uniquely identifies
Indicates the band

class on which the
external
CDMA2000 high
rate packet data
(HRPD) cell
operates. For
details about this
Indicates the
frequency on which
the external
CDMA2000 high
rate packet data
(HRPD) cell
operates. For
details about this

country code (MCC)
of the external
CDMA2000 high
rate packet data
(HRPD) cell.
network (PLMN) ID
is comprised of an
MCC and a mobile
network code
(MNC).
The MCC consists
of three digits.
The MNC consists
of two or three
digits.
For example, if the
MCC is 123 and the
PLMN ID is 12345. NO YES No TDLOFD-001021
network code
(MNC) of the
external
CDMA2000 high
rate packet data
(HRPD) cell.
network (PLMN) ID
is comprised of a
mobile country
code (MCC) and an
MNC.
The MCC consists
of three digits.
The MNC consists
of two or three
digits.
For example, if the
MCC is 123 and the
Indicates the
pseudo noise (PN)
sequence number
of the external
CDMA2000 high
rate packet data
(HRPD) cell. This
number is used as
the physical cell ID
of the cell. For
details, see
C.S0005 LOFD-001021 /
PILOT_PN. NO YES No TDLOFD-001021
Indicates the name

of the external
set to
AUTO_MODE, the
ANR-related MOs
can be modified or
removed by the
user or based on
the ANR algorithm.
The MO removal is
successful even if
the MO does not
exist. An MO can
be added both by
the user and based
on the ANR
algorithm. If an
existed MO is to be
added, the MO is
modified when the
user performs the
addition, but it
cannot be added
based on the ANR
algorithm. When
the ANR-related
MOs are
automatically added
based on the ANR
algorithm, this
parameter is set to
AUTO_MODE by
default. When the
ANR-related MOs
are added by the

of the external
CDMA2000 1xRTT
sector ID together
uniquely identify a
CDMA2000 cell in
the mobile
switching center
(MSC). In the
CDMA2000 1xRTT
network, a cell ID
cell within the
mobile switching
center (MSC). A cell
ID consists of 12 LOFD-001090 /
bits. YES YES No TDLOFD-001090
ID of the external
CDMA2000 1xRTT
sector ID together
uniquely identify a
CDMA2000 cell in
the mobile
switching center
(MSC). A sector ID
is unique in a
CDMA2000 cell and LOFD-001090 /
consists of four bits. YES YES No TDLOFD-001090
Indicates the band

class on which the
external
CDMA2000 1x
radio transmission
technology (1xRTT)
cell operates. For
details about this
Indicates the
frequency on which
the external
CDMA2000 1xRTT
cell operates. For
details about this
Indicates the
system ID of the
external
CDMA2000 1xRTT
assigned to each
local mobile
network and is used
to determine
whether a UE is in
the roaming state.
For details about
Indicates the ID of
the network to
which the external
CDMA2000 1xRTT
cell belongs. A base
station is a cellular
system and a
member of the
network. A network
is a subset of a
system that is
identified by a
system ID. A
network in a system
is identified by a
network ID. A
system ID and a
network ID together
uniquely identify a
network. System ID
0 and network ID 0
indicate all base
stations outside a
specified network
and are reserved
values. Network ID
65535 is also
reserved; this ID
indicates that the
roaming status of
UEs is non-roaming
in the whole system
no matter what the
network ID is. For
details, see the
description of NID LOFD-001090 /
in 3GPP2 C.S0005. YES YES No TDLOFD-001090

country code (MCC)
of the external
CDMA2000 1xRTT
cell.
network (PLMN) ID
is comprised of an
MCC and a mobile
network code
(MNC).
The MCC consists
of three digits.
The MNC consists
of two or three
digits.
For example, if the
MCC is 123 and the
network code
(MNC) of the
external
CDMA2000 1xRTT
cell.
network (PLMN) ID
is comprised of a
mobile country
code (MCC) and an
MNC.
The MCC consists
of three digits.
The MNC consists
of two or three
digits.
For example, if the
MCC is 123 and the
cell belongs. The
value begins with
0x followed by a
maximum of 6
hexadecimal
characters (0 to 9,
and A to F), for
example, 0x123A.
The hexadecimal
character string
for example, the
value cannot be
0x0123A. An MSC
ID uniquely
identifies an MSC
and is determined
by the operator.
MSCID is defined in
TIA/EIA-41.5-D and
consists of
MarketID (2 bytes)
and SwitchNo (1
byte). MarketID is
described in
TIA/EIA TSB29 and
can be defined by
the operator. It can
be the SID or
another ID that can
differentiate
operators.
SwitchNo consists
of a group of cell
addresses and
circuit resource IDs LOFD-001090 /
under MarketID. NO NO No TDLOFD-001090
Indicates the
pseudo noise (PN)
sequence number
of the external
CDMA2000 1xRTT
cell. This number is
used as the
physical cell ID of
the cell. For details,
see the description
of PILOT_PN in LOFD-001090 /
3GPP2 C.S0005. NO YES No TDLOFD-001090
Indicates the name

of the external
set to
AUTO_MODE, the
ANR-related MOs
can be modified or
removed by the
user or based on
the ANR algorithm.
The MO removal is
successful even if
the MO does not
exist. An MO can
be added both by
the user and based
on the ANR
algorithm. If an
existed MO is to be
added, the MO is
modified when the
user performs the
addition, but it
cannot be added
based on the ANR
algorithm. When
the ANR-related
MOs are
automatically added
based on the ANR
algorithm, this
parameter is set to
AUTO_MODE by
default. When the
ANR-related MOs
are added by the
Indicates the ID of
the Local cell. It
cell within an

of the neighboring
CDMA2000 1xRTT
sector ID together
uniquely identify a
CDMA2000 cell in
the entire network.
In the CDMA2000
1xRTT network, a
cell ID uniquely
identifies a cell
within the mobile
switching center
(MSC). A cell ID LOFD-001090 /
consists of 12 bits. YES YES No TDLOFD-001090

ID of the
neighboring
CDMA2000 1xRTT
sector ID together
uniquely identify a
CDMA2000 cell
within the MSC. A
sector ID is unique
in a CDMA2000 cell
and consists of 4 LOFD-001090 /
bits. YES YES No TDLOFD-001090
Indicates the band

class on which the
neighboring
CDMA2000 1xRTT
cell operates. For
details about this
Indicates the
frequency on which
the neighboring
CDMA2000 1xRTT
cell operates. For
details about this
Indicates the
system ID of the
neighboring
CDMA2000 1xRTT
assigned to each
local mobile
network and is used
to determine
whether a UE is in
the roaming state.
For details about
Indicates the
network ID of the
neighboring
CDMA2000 1xRTT
cell. For details
about this
Indicates whether
handovers from the
local cell to the LOFD-001090 /
Indicates whether
Indicates whether LOFD-001090 /
ANR with TDLOFD-001090
cells is enabled. NO NO No TDLOFD-002002

Indicates the name
of the neighboring
set to
AUTO_MODE, the
ANR-related MOs
can be modified or
removed by the
user or based on
the ANR algorithm.
The MO removal is
successful even if
the MO does not
exist. An MO can
be added both by
the user and based
on the ANR
algorithm. If an
existed MO is to be
added, the MO is
modified when the
user performs the
addition, but it
cannot be added
based on the ANR
algorithm. When
the ANR-related
MOs are
automatically added
based on the ANR
algorithm, this
parameter is set to
AUTO_MODE by
default. When the
ANR-related MOs
are added by the

cell within an
Indicates the
neighboring
CDMA2000 band
class. Signals on a
frequency within the
band class can be
obtained by UEs. LBFD-00201803 /
For details, see the TDLBFD-00201803
BandclassCDMA20 LOFD-001035 /
3GPP 36.331. YES YES No TDLOFD-001090
Indicates whether
to configure cell
reselection priorities
for CDMA2000
1xRTT band class.
set to NOT_CFG, LBFD-00201803 /
the cell reselection TDLBFD-00201803
priorities are not LOFD-001035 /
delivered in the TDLOFD-001035
system information. NO NO No TDLOFD-001090
Indicates the
absolute priority of
the CDMA2000
1xRTT band class
to be used during
cell reselection. The
value 0 indicates
the lowest priority.
Frequencies used
for different RATs
must be assigned
different cell
reselection
priorities. The LBFD-00201803 /
information is TDLBFD-00201803
contained in SIB8. LOFD-001035 /
Indicates the RX
signal level required
for a cell on a
frequency in the
higher-priority
CDMA2000 1xRTT
band class to
become a
candidate for cell
reselection. After
measurements are
started for cells on
a frequency in the
band class, a cell
on the frequency
can become a
candidate for
reselection only if
the RX signal level
of the cell is higher
than the value
parameter for a TDLBFD-00201803
time-to-trigger. For LOFD-001035 /
TS 36.304 5.2.4.5. NO NO No TDLOFD-001090
Indicates the RX
for a cell on a
frequency in the
lower-priority
CDMA2000 1xRTT
band class to
become a
candidate for cell
reselection.
After
measurements are
a frequency in the
band class, a cell
on the frequency
can become a
candidate for
reselection only if
the RX signal level
of the cell is better
than the value
parameter for a TDLBFD-00201803
time-to-trigger. For LOFD-001035 /
TS 36.304 5.2.4.5. NO NO No TDLOFD-001090
Indicates whether
to configure cell
for CDMA2000
HRPD band class.
set to NOT_CFG,
the cell reselection LBFD-00201803 /
priorities are not TDLBFD-00201803
delivered in the LOFD-001021 /
Indicates the
the CDMA2000
HRPD band class
to be used during
cell reselection. The
value 0 indicates
the lowest priority.
Frequencies used
for different RATs
must be assigned
different cell
reselection
priorities. The
information is LBFD-00201803 /
contained in SIB8. TDLBFD-00201803
Indicates the RX
for a cell on a
frequency in the
higher-priority
CDMA2000 HRPD
band class to
become a
candidate for cell
reselection. After
measurements are
a frequency in the
band class, a cell
on the frequency
can become a
candidate for
reselection only if
the RX signal level
than the value
specified by this
parameter for a LBFD-00201803 /
time-to-trigger. For TDLBFD-00201803
TS 36.304 5.2.4.5. NO NO No TDLOFD-001021
Indicates the RX
for a cell on a
frequency in the
lower-priority
CDMA2000 HRPD
band class to
become a
candidate for cell
reselection.
After
measurements are
a frequency in the
band class, a cell
on the frequency
can become a
candidate for
reselection only if
the RX signal level
of the cell is lower
than the value
specified by this
parameter for a LBFD-00201803 /
time-to-trigger. For TDLBFD-00201803
TS 36.304 5.2.4.5. NO NO No TDLOFD-001021

country code of the
external cell.
The PLMN consists
of the MCC and the
MNC.
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
For example, MCC
= 123, MNC = 45, LOFD-001020 /
PLMN = 12345. YES YES No TDLOFD-001020

network code of the
external cell.
The PLMN consists
of the MCC and the
MNC.
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
For example, MCC
= 123, MNC = 45, LOFD-001020 /
of the external
GERAN cell. It
GERAN cell within
the area specified
by the location area
identity (LAI). An
LAI consists of the
MCC, MNC, and LOFD-001020 /
LAC. YES YES No TDLOFD-001020
Indicates the LAC

of the external
GERAN cell. It
uniquely identifies a LOFD-001023 /
location within a TDLOFD-001023
PLMN. YES YES No LOFD-001069
Indicates whether
to set the routing
area code (RAC) of
the external
GERAN cell. This
parameter is
required if the
external GERAN
cell supports packet
switched (PS) LOFD-001020 /
LOFD-001034 /
LOFD-001034
LOFD-001053
routing area code. NO NO No TDLOFD-001020
Indicates the
GERAN band
indicator. If the
GERAN ARFCN is
a value in the range
of 512 to 810, the
value of this
parameter is used
to indicate whether
the GERAN ARFCN
is in the 1800 MHz
band or the 1900 LOFD-001020 /
MHz band. If the TDLOFD-001020
GERAN ARFCN is LOFD-001023 /
not in either band, TDLOFD-001023
this parameter does LOFD-001034 /
not take effect and TDLOFD-001034
can be set to either LOFD-001046 /
value. For details, TDLOFD-001046
36.331. NO YES No TDLOFD-001073
Indicates the
GERAN BCCH
ARFCN. For details,
Indicates the
network color code
(NCC) of GERAN. It
is operator-specific
and identifies a
network within the
whole country.The
base transceiver
station identity code
(BSIC) consists of
the NCC and the
base station color
code (BCC). For
TS 23.003. NO YES No TDLOFD-001020
Indicates the base
station color code
(BCC) of an
external GERAN
is used to
discriminate
external GERAN
cells working at the
same
frequency.The base
transceiver station
identity code (BSIC)
consists of the BCC
and the network
color code (NCC).
3GPP TS 23.003. NO YES No TDLOFD-001020
Indicates whether
the cell supports
the dual
transmission mode.
If the cell supports
the dual
transmission mode,
both CS and PS
services can be
handed over to the
cell at the same
time. Otherwise,
only the CS service LOFD-001020 /
or the PS service TDLOFD-001020
can be handed over LOFD-001046 /
to the cell. NO NO No TDLOFD-001046
Indicates the name
GERAN cell. NO NO No TDLOFD-001020
Indicates whether
the external
GERAN cell
supports single
radio voice call
continuity (SRVCC)
for both CS and PS
services. If this
parameter is set to
BOOLEAN_FALSE(
False), the external
GERAN cell does
not support SRVCC
for both CS and PS LOFD-001023 /
The MO removal is
successful even if
the MO does not
exist. An MO can
be added both by
the user and based
on the ANR
algorithm. If an
existed MO is to be
added, the MO is
modified when the
user performs the
addition, but it
cannot be added
based on the ANR
algorithm. The
preceding control
policy also applies
to the
GeranExternalCellP
lmn MO, which is a
child MO of the
GeranExternalCell
MO. When the
ANR-related MOs
are automatically
added based on the
ANR algorithm, this
parameter is set to
AUTO_MODE by
default. When the
ANR-related MOs
are added by the
user, this parameter
can be set to

of the Local cell. It
cell within an
country code of the
neighboring
GERAN cell.
The PLMN consists
of the MCC and the
MNC.
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
For example, MCC
= 123, MNC = 45, LOFD-001020 /

network code of the
neighboring
GERAN cell.
The PLMN consists
of the MCC and the
MNC.
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
For example, MCC
= 123, MNC = 45, LOFD-001020 /
LOFD-001023 /
Indicates the LAC TDLOFD-001023
of the GERAN LOFD-001053
neighboring cell. It LOFD-001069
uniquely identifies a LOFD-
location within a 001020/TDLOFD-
PLMN. YES YES No 001020

of the GERAN
GERAN cell within
the area specified
by the location area
identity (LAI). An
LAI consists of the
MCC, MNC, and LOFD-001020 /
LAC. YES YES No TDLOFD-001020
Indicates whether
removal of the
neighboring
Indicates whether
handovers of UEs
to the neighboring LOFD-001020 /
cell are prohibited. NO NO No TDLOFD-001020
Indicates the
priority of the
neighboring cell
during blind
handovers. Blind
handover is a
process in which
the eNodeB
instructs a UE to
hand over to a
specified
neighboring cell.
There are 32
priorities altogether.
The priority has a
with the value of
this parameter.
Note that the value LOFD-001020 /
0 indicates that TDLOFD-001020
blind handovers to TDLOFD-001023
the neighboring cell TDLOFD-001034
are not allowed. NO NO No TDLOFD-001053
Indicates whether
this neighboring cell
is automatically
discovered by the LOFD-002002 /
ANR algorithm. NO NO No TDLOFD-002002
LOFD-002001 /
TDLOFD-002001
LOFD-002001 /
Indicates the name TDLOFD-002001
of the GERAN LOFD-002002 /
set to
AUTO_MODE, the
ANR-related MOs
can be modified or
removed by the
user or based on
the ANR algorithm.
The MO removal is
successful even if
the MO does not
exist. An MO can
be added both by
the user and based
on the ANR
algorithm. If an
existed MO is to be
added, the MO is
modified when the
user performs the
addition, but it
cannot be added
based on the ANR
algorithm. When
the ANR-related
MOs are
automatically added
based on the ANR
algorithm, this
parameter is set to
AUTO_MODE by
default. When the
ANR-related MOs
are added by the
can be set to
Indicates the
eNodeB ID defined
in the service
protocol interface,
which uniquely
identifies an
eNodeB within a
PLMN. For details,
see 3GPP TS
36.300. NO NO Yes None
Indicates the start

time of the latest
RIM procedure
towards the
neighboring
GERAN cell. NO NO Yes None
Indicates the time
of the latest RIM
request received by
the neighboring
GERAN cell. NO NO Yes None
cell within an
Indicates a GERAN
carrier frequency
group. In the cell
reselection
procedure, the
GERAN carrier
frequencies are
organized in groups
and the cell
reselection
parameters are LBFD-00201803 /
provided per group TDLBFD-00201803
of GERAN carrier LOFD-001020 /
frequencies. YES YES No TDLOFD-001020
Indicates the
standard that is
supported by the
current carrier LOFD-001020 /
frequency group. NO YES No TDLOFD-001020
Indicates the first
ARFCN in the
GERAN carrier
frequency group. If
the GERAN ARFCN
is not between 512
and 810, one
ARFCN can only in
one frequency LBFD-00201803 /
band. For details, TDLBFD-00201803
Indicates the
GERAN band
indicator. If the
GERAN ARFCN is
between 512 and
810, this parameter
indicates whether
the GERAN ARFCN
is in the 1800 MHz
band or the 1900
MHz band. If the
GERAN ARFCN is
not in either band,
this parameter does
not take effect and
can be set to either
value and one
ARFCN can only in
one frequency LBFD-00201803 /
band. For details, TDLBFD-00201803
Indicates whether
to set the
of the frequencies
in the GERAN
carrier frequency
group. If the value
not configured, the
UE does not
reselect to
neighboring cells on
the frequencies in
the GERAN carrier LBFD-00201803 /
frequency group. NO NO No TDLBFD-00201803
measurements on
the frequencies in
the GERAN carrier
frequency group;
then if the signal
quality of some
neighboring cells
meets the related
conditions, the UE
starts cell
reselection. If the
value of this
parameter is
smaller than the
the serving cell, the
UE starts the
measurements only
when the signal
quality of the
serving cell is poor;
then if the signal
quality of some
neighboring cells
meets the related
conditions, the UE
starts cell
reselection.
Frequencies used
for different RATs
must be assigned
different cell
reselection
priorities. For
Indicates whether
to set the maximum
power that the UE
can apply to
transmission on a
frequency in the
GERAN carrier
frequency group. If
the value of this
parameter is not
specified, the
maximum power is
subject to the UE LOFD-001020 /
capability. NO NO No TDLOFD-001020
Indicates the
maximum power
that the UE can
apply to
transmission on a
frequency in the
GERAN carrier
frequency group. It
is used in cell
to calculate the
compensated
power. If the value
not specified, the
maximum power is
subject to the UE
capability. For
Indicates the
minimum RX level
required for a
neighboring cell on
a frequency in the
GERAN carrier
frequency group to
become a
candidate for
selection. It is
S and used in the
evaluation for cell
selection. During
the evaluation for
cell reselection, the
UE performs the
following
calculation: Srxlev =
Measured RSSI
value of a
neighboring cell on
a frequency in the
GERAN carrier
frequency group -
Value of this
parameter -
Compensated
power. If Srxlev for
a neighboring cell is
better than a
threshold for a time-
to-trigger,
reselection to the
cell is started. For
Indicates the RX
level required for a
neighboring cell on
a frequency in the
GERAN carrier
frequency group to
become a
candidate for
reselection if the
priority of the
frequency is higher
than that of the
serving frequency.
After
measurements are
started for
a frequency in the
GERAN carrier
frequency group,
the UE reselects to
a cell on the
frequency only if
the RX level of the
cell is better than
the value specified
by this parameter
for a time-to-trigger.
Indicates the RX
neighboring cell on
a frequency in the
GERAN carrier
frequency group to
become a
candidate for
reselection if the
priority of the
frequency is lower
than that of the
serving frequency.
After
measurements are
started for
a frequency in the
GERAN carrier
frequency group,
the UE reselects to
a cell on the
frequency only if
the RX level of the
serving cell is lower
than a specified
threshold and that
of the cell is better
than the value
specified by this
parameter for a
time-to-trigger. For
Indicates the
frequency offset of
the group of
neighboring
GERAN carrier
frequencies. This
parameter is used
in the decision of
the UE to send
reports for inter- TDLOFD-001020
RAT handovers. For TDLOFD-001023
Indicates whether a
BCCH carrier with LBFD-00201803 /
the specific NCC is TDLBFD-00201803
permitted for LOFD-001020 /
monitoring. For TDLOFD-001020
which the eNodeB
selects a target
frequency group for
blind redirection or
delivers a
frequency group in
measurement
configuration
messages. If a blind
redirection is
triggered and the
target neighboring
cell is not specified,
the eNodeB selects
a target frequency
group based on the
setting of this
parameter. If a
measurement
configuration is to
be delivered, the
eNodeB
preferentially
delivers the
frequency group
with the highest
priority. If this
parameter is set to
0 for a frequency
group, this
frequency group is
not selected as the
target frequency LOFD-001020 /
group for a blind TDLOFD-001020
redirection. A larger TDLOFD-001023
value indicates a TDLOFD-001034
higher priority. NO NO No TDLOFD-001053

cell within an
Indicates the index LBFD-00201803 /
of the BCCH carrier TDLBFD-00201803
frequency group. It LOFD-001020 /
identifies a BCCH TDLOFD-001020
carrier frequency LBFD-002009 /
Specifies the
ARFCN of the
GERAN BCCH. If
the GERAN ARFCN
value is not
between 512 and
810, one ARFCN LBFD-00201803 /
can only in one TDLBFD-00201803
frequency band. LOFD-001020 /
For details about TDLOFD-001020
this parameter, see LBFD-002009 /
3GPP TS 45.005. YES YES No TDLBFD-002009

cell within an
Indicates the
starting physical cell
ID of the intra-
blacklisted cell. For TDLBFD-002009
TS 36.331. YES YES No TDLBFD-00201801

of the intra- TDLBFD-00201803
blacklisted cell. NO NO No TDLBFD-00201801
Indicates the
physical cell ID
range of the intra-

cell within an

country code of the
E-UTRAN
neighboring cell.
The PLMN consists
of the MCC and the
MNC.
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
For example, MCC
= 123, MNC = 45, LBFD-00201801 /
PLMN = 12345. YES YES No TDLBFD-00201801

network code of the
E-UTRAN
neighboring cell.
The PLMN consists
of the MCC and the
MNC.
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
For example, MCC
= 123, MNC = 45, LBFD-00201801 /
Indicates the
eNodeB identity of
the intra-frequency
uniquely identifies
an eNodeB within a
PLMN. The 28-bit
E-UTRAN cell
identity is
comprised of the
eNodeB identity
(represented by the
most significant 20
E-UTRAN cell is
comprised of the E-
UTRAN cell identity
and the PLMN ID.
For details, see
Indicates the local

identity of the intra-
frequency
cell within an
eNodeB. The 28-bit
E-UTRAN cell
identity is
comprised of the
cell identity
(represented by the
least significant
eight bits) and the
eNodeB identity.
The cell global
E-UTRAN cell is
comprised of the E-
UTRAN cell identity
and the PLMN ID.
Indicates the cell
individual offset for
the intra-frequency
neighboring cell,
which is used in
evaluation for
handovers. It
affects the
probability of
triggering intra-
frequency
measurement
reports. A larger
value of this
parameter indicates
a higher probability. LBFD-00201801 /
for the intra-
frequency
neighboring cell,
which is used in
evaluation for cell
reselections. A
a lower probability
of cell reselections.
not set to dB0, it is
delivered in SIB4.
For details, see
3GPP TS 36.331. If
this parameter is
set to dB0, it is not
delivered in SIB4.
In this situation,
UEs use 0 dB as
the offset for cell
reselections. For
Indicates whether
handovers of UEs
to the neighboring LBFD-00201801 /
cell are prohibited. NO NO No TDLBFD-00201801
Indicates whether
removal of the
neighboring
Indicates whether
is automatically
Indicates the name LBFD-00201801
of the local cell. NO NO No LOFD-002001
Indicates the name

of the intra- LBFD-00201801 /
frequency TDLBFD-00201801
neighboring E- LOFD-002001 /
UTRAN cell. NO NO No TDLOFD-002001
Indicates the
priority of
measurement on
the intra-frequency
neighboring cell.
The eNodeB
preferentially
contains the
information about a
neighboring cell LBFD-00201801 /
with this priority set TDLBFD-00201801
to HIGH_PRIORITY LBFD-00201804 /
while delivering a TDLBFD-00201804
configuration. NO NO No TDLBFD-00201805
in UEs supporting
the eICIC feature.
The eNodeB
generates a new
CellIndividualOffset
value by exempting
the original
value from the
CellRangeExpansio
n value, and
delivers the new
value to a UE,
based on which the
UE can be handed
over from the
eNodeB to a micro
earlier. The eNodeB
generates a new
value by adding up
original
value and the
CellRangeExpansio
n value, and
delivers the new
value to a UE,
based on which the
UE can be handed
over from a micro to
the eNodeB later.
Therefore, the cell
coverage of micro is LBFD-002003
expanded. NO NO No LOFD-001099
set to
AUTO_MODE, the
ANR-related MOs
can be modified or
removed by the
user or based on
the ANR algorithm.
The MO removal is
successful even if
the MO does not
exist. An MO can
be added both by
the user and based
on the ANR
algorithm. If an
existed MO is to be
added, the MO is
modified when the
user performs the
addition, but it
cannot be added
based on the ANR
algorithm. When
the ANR-related
MOs are
automatically added
based on the ANR
algorithm, this
parameter is set to
AUTO_MODE by
default. When the
ANR-related MOs
are added by the
can be set to

cell within an
LBFD-00201802 /
TDLBFD-00201802
Indicates the DL LBFD-00201803 /
EARFCN of the TDLBFD-00201803
neighboring cell on LBFD-00201804 /
the neighboring E- TDLBFD-00201804
UTRAN frequency. LBFD-00201805 /
Indicates whether
to set the UL
EARFCN. If this
NOT_CFG, the UL TDLBFD-00201802
EARFCN is the DL LBFD-00201803 /
EARFCN plus TDLBFD-00201803
18000 in FDD LBFD-00201804 /
mode and is the TDLBFD-00201804
same as the DL LBFD-00201805 /
EARFCN in TDD TDLBFD-00201805
Indicates the UL
EARFCN of the
neighboring cell on
the neighboring E-
UTRAN frequency.
For an FDD cell, if
no UL EARFCN is
configured, the UL
EARFCN equals LBFD-00201802 /
the sum of the DL TDLBFD-00201802
EARFCN and LBFD-00201803 /
18000. For a TDD TDLBFD-00201803
cell, the UL LBFD-00201804 /
EARFCN equals TDLBFD-00201804
the DL EARFCN. LBFD-00201805 /
Indicates whether
to set the
of the neighboring
E-UTRAN
frequency. If the
value of this
parameter is not
specified, the UE
does not reselect to
neighboring cells on LBFD-00201803 /
the frequency. NO NO No TDLBFD-00201803
serving cell, the UE
starts
measurements on
the frequency; then
if the signal quality
of some
neighboring cells
meets the related
conditions, the UE
starts cell
reselection. If the
value of this
parameter is less
UE starts the
measurements only
when the signal
quality of the
then if the signal
quality of some
neighboring cells
meets the related
conditions, the UE
starts cell
reselection.
Frequencies used
for different RATs
must be assigned
different cell
reselection
priorities. For
Indicates the
evaluation duration
for a UE to
determine whether
to select an inter-
frequency
neighboring cell to
camp on. If the
signal quality in an
inter-frequency
neighboring cell is
better than that in
by this parameter
and a UE has been
camped on the
serving cell for
more than 1s, the
UE attempts to
reselect the inter-
frequency
neighboring cell to
camp on. This
parameter is
contained in SIB5.
Indicates whether
to set the speed-
dependent scaling
parameters related
to cell reselection.
set to NOT_CFG,
speed-dependent
cell reselections are
not supported by LBFD-00201803 /
default. NO NO No TDLBFD-00201803
Indicates the
scaling factor
applied to the cell
for medium-mobility
UEs. This
parameter is
delivered in SIB5.
Indicates the
scaling factor
applied to the cell
for high-mobility
UEs. This
parameter is
delivered in SIB5.
Indicates the
measurement
bandwidth of the
inter-frequency
neighboring cell on
the frequency. The
setting of this
parameter depends
on the bandwidth
configuration of the
cell. In E-UTRAN, a
cell bandwidth is
also expressed in
units of resource
blocks (RBs). Cell
bandwidths 1.4
MHz, 3 MHz, 5
MHz, 10 MHz, 15
MHz, and 20 MHz LBFD-00201802 /
correspond to 6 TDLBFD-00201802
RBs, 15 RBs, 25 LBFD-00201804 /
RBs, 50 RBs, 75 TDLBFD-00201804
RBs, and 100 RBs, LBFD-00201805 /
respectively. NO YES No TDLBFD-00201805
Indicates the
frequency-specific
offset for the
neighboring E-
UTRAN frequency
that applies to UEs
in idle mode. It is
contained in system
information block
type 5 (SIB5) and
delivered to UEs in
idle mode for cell
reselection. For
Indicates the RX
neighboring cell on
the frequency to
become a
candidate for
reselection if the
priority of the
frequency is higher
than that of the
serving frequency.
After
measurements are
started for
the frequency, the
UE reselects to a
neighboring cell on
the frequency only
if the RX level of
the cell is better
than the value
specified by this
parameter for a
Indicates the
minimum RX level
required for a
neighboring cell on
the frequency to
become a
candidate for
reselection if the
priority of the
frequency is lower
than that of the
serving frequency.
After
measurements are
started for
the frequency, the
UE reselects to a
neighboring cell on
the frequency only
if the RX level of
the serving cell is
lower than a
specified threshold
and that of the cell
is higher than the
value specified by
this parameter for a
Indicates the RX
neighboring cell on
the frequency to
become a suitable
cell for selection. It
is included in
criteria S and used
in the evaluation for
cell selection.
During the
evaluation for cell
reselection, the UE
performs the
following
Measured RSRP
value of a
neighboring cell on
the frequency -
Value of this
parameter -
Compensated
a cell is better than
a threshold for a
time-to-trigger,
reselection to the
Indicates whether
to set the maximum
power that the UE
can apply to
transmission on the
neighboring E-
UTRAN frequency.
parameter is not
specified, the
maximum power is
Indicates the
maximum power
that the UE can
apply to
transmission on the
neighboring E-
UTRAN frequency.
It is used in cell
to calculate the
compensated
power. If the value
not specified, the
maximum power is
subject to the UE
capability. For
Indicates the
information related
to MBSFN and TDD
UL/DL
configurations of
inter-frequency
neighboring cell of
the serving cell.
BitString00:
Indicates that some
neighboring cells
have the same
MBSFN subframe
configuration as the
serving cell.
BitString01:
Indicates that none
of the neighboring
cells is configured
with MBSFN
subframes.
BitString10:
Indicates that the
MBSFN subframe
configurations of all
neighboring cells
are the same as or
subsets of that of
the serving cell.
BitString11: LBFD-00201802 /
Indicates that the TDLBFD-00201802
serving TDD cells LBFD-00201803 /
have neighboring TDLBFD-00201803
cells of different UL- LBFD-00201804 /
DL configurations. TDLBFD-00201804
Indicates whether
all inter-frequency
this frequency are
configured with at
least two antenna
ports.
Set this parameter
to TRUE if all inter-
frequency
this frequency are
configured with at
least two antenna
ports. LBFD-00201802 /
Set this parameter TDLBFD-00201802
to FALSE if one LBFD-00201803 /
inter-frequency TDLBFD-00201803
neighboring cell on LBFD-00201804 /
this frequency is TDLBFD-00201804
configured with only LBFD-00201805 /
one antenna port. NO NO No TDLBFD-00201805
Indicates the event

to trigger coverage-
based inter-
frequency
handovers. This
parameter can be
set to EventA3,
EventA4, or
EventA5. If the
neighboring E-
UTRAN frequency
and the serving
frequency are in the
same frequency
band, event A3 is
recommended as it
provides better
handover
performance in this
situation. If the
neighboring E-
UTRAN frequency
and the serving
frequency are in
different frequency
bands, event A4 or LBFD-00201802 /
A5 is used. NO NO No TDLBFD-00201802
Indicates the
RSRQ-based
minimum RX level
required for a
neighboring cell on
the frequency to
become a
candidate for
reselection if the
RSRQ-based
priority of the
frequency is higher
than that of the
serving frequency.
After
measurements are
started for
the neighboring E-
UTRAN frequency,
the UE reselects to
a neighboring cell
on the frequency
only if the RSRQ-
based RX level of
the cell is higher
than the value
specified by this
parameter for a
Indicates the
RSRQ-based
minimum RX level
required for a
neighboring cell on
the frequency to
become a
candidate for
reselection if the
RSRQ-based
priority of the
frequency is lower
than that of the
serving frequency.
After
measurements are
started for
a frequency in the
GERAN carrier
frequency group,
the UE reselects to
a neighboring cell
on the frequency
only if the RSRQ-
based RX level of
the serving cell is
lower than a
specified threshold
is higher than the
value specified by
Indicates whether
to set the minimum LBFD-00201803 /
required RX level. NO NO No TDLBFD-00201803
Indicates the
minimum RX level
of an inter-
frequency
neighboring cell,
which is required for
it to become a
candidate for cell
reselection. It
determines the
probability of
triggering cell
reselection to inter-
frequency
the frequency. The
value of this
parameter is
contained in SIB5.
Indicates the
frequency priority
based on which the
eNodeB selects a
target frequency for
contains a
frequency in a
measurement
configuration. If a
blind redirection is
triggered and the
target neighboring
the eNodeB selects
a target frequency
based on this
priority. If a
measurement
configuration is to
be delivered, the
eNodeB
preferentially
delivers a
frequency with the
highest priority. If
this priority is set to
0 for a frequency,
this frequency is not
selected as the
a blind redirection. LBFD-00201802 /
A larger value TDLBFD-00201802
indicates a higher LBFD-00201804 /
Indicates whether
an inter-frequency
is allowed to
function as the
target frequency in
the inter-frequency
MLB. When this
parameter is set to
ALLOWED, an
inter-frequency can
function as the
target frequency in
the inter-frequency
MLB. When this
parameter is set to
NOT_ALLOWED,
an inter-frequency
cannot function as
the target frequency
in the inter-
frequency MLB.
This parameter
applies only to
inter-frequency
blind MLB in the LBFD-00201802 /
current version. NO NO No TDLBFD-00201802
Indicates the
frequency-specific
offset for the
neighboring E-
UTRAN frequency
that applies to UEs
in connected mode.
It is contained in the
event A3/A4/A5
measurement
configuration and
delivered to UEs in
connected mode.
The offset controls LBFD-00201802 /
the probability of TDLBFD-00201802
reporting events A3, LBFD-00201804 /
A4, and A5. For TDLBFD-00201804
set to
AUTO_MODE, the
ANR-related MOs
can be modified or
removed by the
user or based on
the ANR algorithm.
The MO removal is
successful even if
the MO does not
exist. An MO can
be added both by
the user and based
on the ANR
algorithm. If an
existed MO is to be
added, the MO is
modified when the
user performs the
addition, but it
cannot be added
based on the ANR
algorithm. When
the ANR-related
MOs are
automatically added
based on the ANR
algorithm, this
parameter is set to
AUTO_MODE by
default. When the
ANR-related MOs
are added by the
can be set to

cell within an
Indicates the DL
EARFCN of the
inter-frequency LBFD-00201803 /
Indicates the
starting physical cell LBFD-00201802 /
ID of the inter- TDLBFD-00201802

of the inter- TDLBFD-00201803
blacklisted cell. NO NO No TDLBFD-00201802
Indicates the
physical cell ID LBFD-00201802 /
range of the inter- TDLBFD-00201802
cell within an

country code of the
E-UTRAN
neighboring cell.
The PLMN consists
of the MCC and the
MNC.
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
For example, MCC
= 123, MNC = 45, LBFD-00201802 /

network code of the
E-UTRAN
neighboring cell.
The PLMN consists
of the MCC and the
MNC.
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
For example, MCC
= 123, MNC = 45, LBFD-00201802 /
Indicates the
eNodeB identity of
the inter-frequency
uniquely identifies
an eNodeB within a
PLMN. The 28-bit
E-UTRAN cell
identity is
comprised of the
eNodeB identity
(represented by the
most significant 20
E-UTRAN cell is
comprised of the E-
UTRAN cell identity
and the PLMN ID.
For details, see
Indicates the local

identity of the inter-
frequency
cell within an
eNodeB. The 28-bit
E-UTRAN cell
identity is
comprised of the
cell identity
(represented by the
least significant
eight bits) and the
eNodeB identity.
The cell global
E-UTRAN cell is
comprised of the E-
UTRAN cell identity
and the PLMN ID.
For details, see
3GPP TS 36.413. YES YES No LBFD-00201802
Indicates the cell
individual offset for
the inter-frequency
neighboring cell,
which is used in
evaluation for
handovers. It
affects the
probability of
triggering inter-
frequency
measurement
reports. A larger LBFD-00201802 /
a higher probability. TDLBFD-00201804
for the inter-
frequency
neighboring cell,
which is used in
evaluation for cell
reselections. A
a lower probability
of cell reselections.
not set to dB0, it is
delivered in SIB5.
For details, see
3GPP TS 36.331. If
this parameter is
set to dB0, it is not
delivered in SIB5.
In this situation,
UEs use 0 dB as
the offset for cell
reselections. For
LBFD-00201802 /
TDLBFD-00201802
LBFD-00201804 /
TDLBFD-00201804
handovers of UEs TDLBFD-00201805
to the neighboring LOFD-002012 /
cell are prohibited. NO NO No TDLOFD-002012
Indicates whether
handover priority,
frequency-based-
handover priority,
and 0. Within the
same segment, a
larger parameter
value indicates a
higher priority. Blind
handover is a
process in which
the eNodeB
instructs a UE to
hand over to a
specified
neighboring cell
without
measurements. If
this parameter
value is set to 0,
blind handovers
and frequency-
based handovers
cannot be
performed. The
parameter values 1
to 16 indicate the
blind-handover
priorities. The
parameter values
17 to 32 indicate
the frequency-
based-handover
priorities for LBFD-00201802 /
frequency-based TDLBFD-00201802
blind handovers LBFD-00201804 /
and measurement- TDLBFD-00201804
based handovers. NO NO No TDLOFD-001050
Indicates whether
is automatically
LBFD-00201802 /
TDLBFD-00201802

of the inter- TDLBFD-00201802
frequency LOFD-002001 /
Indicates the
priority of
measurement on
the inter-frequency
neighboring cell.
The eNodeB
preferentially
contains the
information about a LBFD-00201802 /
neighboring cell TDLBFD-00201802
with this priority set LBFD-00201804 /
to HIGH_PRIORITY TDLBFD-00201804
while delivering a LBFD-00201805 /
configuration. NO NO No TDLOFD-001050
set to
AUTO_MODE, the
ANR-related MOs
can be modified or
removed by the
user or based on
the ANR algorithm.
The MO removal is
successful even if
the MO does not
exist. An MO can
be added both by
the user and based
on the ANR
algorithm. If an
existed MO is to be
added, the MO is
modified when the
user performs the
addition, but it
cannot be added
based on the ANR
algorithm. When
the ANR-related
MOs are
automatically added
based on the ANR
algorithm, this
parameter is set to
AUTO_MODE by
default. When the
ANR-related MOs
are added by the
can be set to

country code of the
external E-UTRAN
cell.
The PLMN consists
of the MCC and the
MNC.
The MCC consists
of three digits. LOFD-001036
The MNC consists LOFD-001037
of two to three TDLBFD-00201801
digits. TDLBFD-00201802
For example, MCC TDLBFD-00201804
= 123, MNC = 45, TDLBFD-00201805
network code of the
external E-UTRAN
cell.
The PLMN consists
of the MCC and the
MNC. LOFD-001036 /
The MCC consists TDLOFD-001036
of three digits. LOFD-001037 /
The MNC consists TDLOFD-001037
of two to three TDLBFD-00201801
digits. TDLBFD-00201802
For example, MCC TDLBFD-00201804
= 123, MNC = 45, TDLBFD-00201805
Indicates the
eNodeB identity of
the external E-
UTRAN cell. It
uniquely identifies
an eNodeB within a
PLMN. The 28-bit
E-UTRAN cell
identity is
comprised of the
eNodeB identity
(represented by the
most significant 20
E-UTRAN cell is
comprised of the E-
UTRAN cell identity
and the PLMN ID.
For details, see
Indicates the cell
identity of the
external E-UTRAN
cell. It uniquely
identifies a cell
within an eNodeB.
The 28-bit E-
UTRAN cell identity
is comprised of the
cell identity
(represented by the
least significant
eight bits) and the
eNodeB identity.
The cell global
E-UTRAN cell is
comprised of the E-
UTRAN cell identity LBFD-00201801 /
and the PLMN ID. TDLBFD-00201801
LOFD-001036 /
TDLOFD-001036
LOFD-001037 /
TDLOFD-001037
Indicates the DL TDLBFD-00201801
EARFCN of the TDLBFD-00201802
external E-UTRAN TDLBFD-00201804
cell. For details, see TDLBFD-00201805
Indicates whether
to set the UL
EARFCN for the
external E-UTRAN
cell. If this
parameter is set to
NOT_CFG, the UL
EARFCN is the DL
EARFCN plus
18000 in FDD
mode and is the LBFD-00201801 /
same as the DL TDLBFD-00201801
EARFCN in TDD LBFD-00201802 /
Indicates the UL
EARFCN of the
external E-UTRAN
cell. For an FDD
cell, if no UL
EARFCN is
configured, the UL
EARFCN equals
the sum of the DL
EARFCN and
18000. For a TDD
cell, the UL
EARFCN equals
the DL EARFCN.
For details, see
3GPP TS 36.104. NO NO No None
Indicates the
physical cell ID of
the external E-
UTRAN cell. For LBFD-00201801
details, see 3GPP LBFD-00201802
TS 36.331. NO YES No LBFD-00201803
Indicates the
tracking area code
(TAC) of the
external E-UTRAN
cell. Two TAC
values 0x0000(0)
and
0xFFFE(65534) are
reserved according
to the protocol and
will not be used in
future versions.
Therefore, do not
use 0 or 65534 as a LBFD-00201801 /
TAC value in TAC TDLBFD-00201801
planning or LBFD-00201802 /
configuration. NO YES No TDLBFD-00201802
LBFD-00201801 /
of the external E- LBFD-00201802 /
UTRAN cell. NO NO No TDLBFD-00201802
is configured based
on DlEarfcn, and
the downlink
frequency bands
are configured
based on this
parameter. If there
are multiple
frequency bands of
downlink
frequencies in the
frequency bands
are configured
based on the
priorities in
descending order.
The frequency band
priorities of an
external E-UTRAN
cell are determined
based on the
network planning of
an operator. It is
recommended that
the frequency band
values are arranged
in ascending order.
The frequency band
with the minimum
value is of the
the frequency band
with the maximum
value is of the
Indicates the
frequency band in
which the cell
operates. For
details about this
parameter, see
The MO removal is
successful even if
the MO does not
exist. An MO can
be added both by
the user and based
on the ANR
algorithm. If an
existed MO is to be
added, the MO is
modified when the
user performs the
addition, but it
cannot be added
based on the ANR
algorithm. The
preceding control
policy also applies
to the
EutranExternalCell
Plmn MO, which is
a child MO of the
EutranExternalCell
MO. When the
ANR-related MOs
are automatically
added based on the
ANR algorithm, this
parameter is set to
AUTO_MODE by
default. When the
ANR-related MOs
are added by the
can be set to

cell within an
Indicates the
neighboring
CDMA2000 band LOFD-001035 /
class. For details, TDLOFD-001035
see the LOFD-001021 /
BandclassCDMA20 TDLOFD-001021
00 IE defined in LOFD-001112 /
3GPP 36.331. YES YES No TDLOFD-001112
LOFD-001035 /
TDLOFD-001035
LOFD-001021 /
TDLOFD-001021
Indicates whether
to configure a
dedicated cell-
based on the PLMN LOFD-001035 /
ID of the local cell TDLOFD-001035
for the CDMA2000 TDLOFD-001018
1xRTT band class. NO NO No TDLOFD-001112
based on the PLMN
ID of the local cell.
The value 0
priority. If the
related SPID
configuration is
specified, set this
priority to the one
specified in the
SPID configuration.
If no related SPID
configuration is
specified but this
parameter is set,
the eNodeB
delivers the cell
of all PLMNs
supported by a UE
by using the IE
idleModeMobilityCo
ntrolInfo in an RRC
Connection
Release message
to the UE. If no
related SPID
configuration is
specified and this
parameter is not
set, a UE uses the
cell reselection
priority of the
CDMA2000 band LOFD-001035 /
class, which is TDLOFD-001035
broadcast in the TDLOFD-001018
Indicates whether
to configure
dedicated a cell-
based on the PLMN
ID of the local cell LOFD-001021 /
for the CDMA2000 TDLOFD-001021
HRPD band class. NO NO No TDLOFD-001112
based on the PLMN
ID of the local cell.
The value 0
priority. If the
related SPID
configuration is
specified, set this
priority to the one
specified in the
SPID configuration.
If no related SPID
configuration is
specified but this
parameter is set,
the eNodeB
delivers the cell
of all PLMNs
supported by a UE
by using the IE
idleModeMobilityCo
ntrolInfo in an RRC
Connection
Release message
to the UE. If no
related SPID
configuration is
specified and this
parameter is not
set, a UE uses the
cell reselection
priority of the
CDMA2000 band
class, which is LOFD-001021 /
broadcast in the TDLOFD-001021
Indicates the ID of
the local cell. It
cell within an
Indicates the DL
EARFCN of the
operator that
shares the
neighboring E-
UTRAN frequency. LOFD-001036 /

country code (MCC)
of the operator that
shares the
neighboring E-
UTRAN frequency.
network (PLMN) ID
is comprised of an
MCC and a mobile
network code
(MNC).
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
For example, if the

network code
(MNC) of the
operator that
shares the
neighboring E-
UTRAN frequency.
network (PLMN) ID
is comprised of a
mobile network
code (MCC) and an
MNC.
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
For example, if the
Indicates whether LOFD-001036
to configure the cell TDLBFD-00201803
reselection priority. NO NO No TDLOFD-001112
The value 0
priority. If the
related SPID
configuration is
specified, the cell
specified in the
SPID configuration
is used. If no
related SPID
configuration is
specified but this
parameter is set,
the eNodeB
delivers the cell
of all PLMNs
supported by a UE
by using the IE
idleModeMobilityCo
ntrolInfo in an RRC
Connection
Release message
to the UE. If no
related SPID
configuration is
specified and this
parameter is not
set, a UE uses the
cell reselection
priority of the
neighboring E-
UTRAN frequency,
which is broadcast LOFD-001036
in the system TDLBFD-00201803
information. NO NO No TDLOFD-001112
Indicates the ID of
the local cell. It
cell within an
Indicates the DL
EARFCN of the
Operator
Configuration for
Serving Cell in
EUTRAN
Frequency. For
details, see the LOFD-001112 /

Indicates whether
to configure a
dedicated cell-
based on the PLMN
for the neighboring TDLOFD-001112
E-UTRAN LBFD-00201803 /
frequency. NO NO No TDLBFD-00201803
local cell. The value
0 indicates the
lowest priority. If the
related SPID
configuration is
specified, the cell
specified in the
SPID configuration
is used. If no
related SPID
configuration is
specified but this
parameter is set,
the eNodeB
delivers the cell
of all PLMNs
supported by a UE
by using the IE
idleModeMobilityCo
ntrolInfo in an RRC
Connection
Release message
to the UE. If no
related SPID
configuration is
specified and this
parameter is not
set, a UE uses the
cell reselection
priority of the
neighboring E-
UTRAN frequency, LOFD-001112 /
which is broadcast TDLOFD-001112
in the system LBFD-00201803 /
Indicates the ID of
the local cell. It
cell within an
Indicates the index
of the GERAN
carrier frequency
group. It uniquely
identifies a GERAN
carrier frequency LOFD-001112 /

Indicates whether
to configure a
dedicated cell-
based on the PLMN
for the GERAN TDLOFD-001112
carrier frequency LBFD-00201803 /
0 indicates the
related SPID
configuration is
specified, set this
priority to the one
specified in the
SPID configuration.
If no related SPID
configuration is
specified but this
parameter is set,
the eNodeB
delivers the cell
of all PLMNs
supported by a UE
by using the IE
idleModeMobilityCo
ntrolInfo in an RRC
Connection
Release message
to the UE. If no
related SPID
configuration is
specified and this
parameter is not
set, a UE uses the
cell reselection
priority of the
neighboring
GERAN carrier
frequency group, LOFD-001112 /
which is broadcast TDLOFD-001112
in the system LBFD-00201803 /
Indicates the cell

identity of the local
cell. It uniquely
identifies a cell
Indicates the index
of the GERAN
carrier frequency
group. It uniquely
identifies a GERAN LOFD-001036 /
carrier frequency TDLOFD-001036

country code (MCC)
of the operator that
shares the
neighboring
GERAN carrier
frequency group.
network (PLMN) ID
is comprised of an
MCC and a mobile
network code
(MNC).
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
For example, if the
MNC is 45, then the TDLOFD-001036
network code
(MNC) of the
operator that
shares the
neighboring
GERAN carrier
frequency group.
network (PLMN) ID
is comprised of a
mobile country
code (MCC) and an
MNC.
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
For example, if the
Indicates whether
to configure the cell
of the operator that LOFD-001036 /
shares the TDLOFD-001036
neighboring LBFD-00201803 /
GERAN carrier TDLBFD-00201803
frequency group. NO NO No TDLOFD-001112
The value 0
priority. If the
related SPID
configuration is
specified, set this
priority to the one
specified in the
SPID configuration.
If no related SPID
configuration is
specified but this
parameter is set,
the eNodeB
delivers the cell
of all PLMNs
supported by a UE
by using the IE
idleModeMobilityCo
ntrolInfo in an RRC
Connection
Release message
to the UE. If no
related SPID
configuration is
specified and this
parameter is not
set, a UE uses the
cell reselection
priority of the
neighboring
GERAN carrier LOFD-001036 /
frequency group, TDLOFD-001036
which is broadcast LBFD-00201803 /
in the system TDLBFD-00201803
information. NO NO No TDLOFD-001112

cell within an
country code of the
neighboring UTRAN
cell.
The PLMN consists
of the MCC and the
MNC.
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
For example, MCC
= 123, MNC = 45, LOFD-001019 /

network code of the
neighboring UTRAN
cell.
The PLMN consists
of the MCC and the
MNC.
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
For example, MCC
= 123, MNC = 45, LOFD-001019 /
Indicates the RNC

ID of the
neighboring UTRAN
cell. The 28-bit
UTRAN cell ID is
comprised of the
RNC cell ID and the
RNC ID that are
represented by the
bits and the most
respectively. The
formula for
calculating the
UTRAN cell ID is as
follows: UTRAN cell
Indicates the RNC
cell ID of an
external UTRAN
cell. It uniquely
identifies a cell
within an RNC. The
28-bit UTRAN cell
ID is comprised of
the RNC cell ID and
the RNC ID that are
represented by the
bits and the most
respectively. The
formula for
calculating the
UTRAN cell ID is as
follows: UTRAN cell
Indicates whether
to allow handover
of UEs to the
neighboring cell
that is determined
by the neighboring LOFD-001019 /
relation. NO NO No TDLOFD-001019
Indicates whether
removal of the
neighboring
Indicates whether
is automatically
Indicates the
priority of the
neighboring cell
during blind
handovers. Blind
handover is a
process in which
the eNodeB
instructs a UE to
hand over to a
specified
neighboring cell.
There are 32
priorities altogether.
The priority has a
positive correlation LOFD-001019
with the value of TDLOFD-001022
this parameter. TDLOFD-001033
Note that the value TDLOFD-001052
0 indicates that TDLOFD-001019
blind handovers to TDLOFD-001043
the neighboring cell TDLOFD-001072
are not allowed. NO NO No TDLOFD-001078
Indicates the
priority of
measurement on
the neighboring
UTRAN cell. The
eNodeB
preferentially
contains the LOFD-001019
information about a TDLOFD-001022
neighboring cell TDLOFD-001033
with this priority set TDLOFD-001052
to HIGH_PRIORITY TDLOFD-001019
while delivering a TDLOFD-001043
configuration. NO NO No TDLOFD-001078
Indicates the name
of the local cell. NO NO No LOFD-001019
Indicates the name

of the UTRAN LOFD-001019 /
set to
AUTO_MODE, the
ANR-related MOs
can be modified or
removed by the
user or based on
the ANR algorithm.
The MO removal is
successful even if
the MO does not
exist. An MO can
be added both by
the user and based
on the ANR
algorithm. If an
existed MO is to be
added, the MO is
modified when the
user performs the
addition, but it
cannot be added
based on the ANR
algorithm. When
the ANR-related
MOs are
automatically added
based on the ANR
algorithm, this
parameter is set to
AUTO_MODE by
default. When the
ANR-related MOs
are added by the
can be set to
Indicates the ID of
the eNodeB, which
uniquely identifies
an eNodeB within a
PLMN. NO NO Yes None
Indicates the time
of the latest RIM
request received by
the neighboring
UTRAN cell. NO NO Yes None

updated time of the
system information
that the eNodeB
receives from the
neighboring UTRAN
cell through the
RIM procedure. NO NO Yes None
time that the
eNodeB obtains the
load information
about the
neighboring UTRAN
cell through an RIM

time that the
eNodeB initiates an
RIM procedure to
obtain the load
information about
the neighboring
UTRAN cell. NO NO Yes None
Indicates the load

status of the
neighboring UTRAN
cell, which is
obtained by the
eNodeB through
the latest RIM

cell within an
Indicates the
downlink UARFCN
of the neighboring LOFD-001112 /
UTRAN frequency. YES YES No TDLOFD-001112
Indicates whether
to configure a
dedicated cell-
based on the PLMN LOFD-001112 /
ID of the local cell TDLOFD-001112
for the UTRAN LBFD-00201803 /
frequency. NO NO No TDLBFD-00201803
frequency based on
the PLMN ID of the
0 indicates the
related SPID
configuration is
specified, set this
priority to the one
specified in the
SPID configuration.
If no related SPID
configuration is
specified but this
parameter is set,
the eNodeB
delivers the cell
of all PLMNs
supported by a UE
by using the IE
idleModeMobilityCo
ntrolInfo in an RRC
Connection
Release message
to the UE. If no
related SPID
configuration is
specified and this
parameter is not
set, a UE uses the
cell reselection
priority of the
neighboring UTRAN LOFD-001112 /
frequency, which is TDLOFD-001112
broadcast in the LBFD-00201803 /
system information. NO NO No TDLBFD-00201803
Indicates the cell
identity of the local
cell. It uniquely
identifies a cell
[9500-9600] and
[10050-10125]
Special UARFCNs:
none
Band 2:
Normal UARFCNs:
[9250-9550] and
[9650-9950]
Special UARFCNs:
none
Band 3:
Normal UARFCNs:
[9550-9650]
Special UARFCNs:
none
Band 4:
Normal UARFCNs:
[12850-13100]
Special UARFCNs:
(2112, 2137, 2162,
2187, 2212, 2237,
2262, 2287, 2312,
2337)
Band 5:
Normal UARFCNs:
[11500-12000]
Special UARFCNs:
none
Band 6:
Normal UARFCNs:
[9400-9600]
Special UARFCNs:
none
For details, see
3GPP TS 25.104 LOFD-001036 /
and 3GPP TS TDLOFD-001036
country code (MCC)
of the neighboring
UTRAN cell.
network (PLMN) ID
is comprised of an
MCC and a mobile
network code
(MNC).
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
For example, if the

network code
(MNC) of the
neighboring UTRAN
cell.
network (PLMN) ID
is comprised of a
mobile country
code (MCC) and an
MNC.
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
For example, if the
Indicates whether
to configure the cell
reselection priority LOFD-001036 /
of the operator that TDLOFD-001036
shares the LBFD-00201803 /
neighboring UTRAN TDLBFD-00201803
shares the
neighboring UTRAN
frequency. The
value 0 indicates
the lowest priority. If
the related SPID
configuration is
specified, set this
priority to the one
specified in the
SPID configuration.
If no related SPID
configuration is
specified but this
parameter is set,
the eNodeB
delivers the cell
of all PLMNs
supported by a UE
by using the IE
idleModeMobilityCo
ntrolInfo in an RRC
Connection
Release message
to the UE. If no
related SPID
configuration is
specified and this
parameter is not
set, a UE uses the
cell reselection
priority of the LOFD-001036 /
neighboring UTRAN TDLOFD-001036
frequency, which is LBFD-00201803 /
broadcast in the TDLBFD-00201803

cell within an
[9500-9600] and
[10050-10125]
Special UARFCNs:
none
Band 2:
Normal UARFCNs:
[9250-9550] and
[9650-9950]
Special UARFCNs:
none
Band 3:
Normal UARFCNs:
[9550-9650]
Special UARFCNs:
none
Band 4:
Normal UARFCNs:
[12850-13100]
Special UARFCNs:
(2112, 2137, 2162,
2187, 2212, 2237,
2262, 2287, 2312,
2337)
Band 5:
Normal UARFCNs:
[11500-12000]
Special UARFCNs:
none
Band 6:
Normal UARFCNs:
[9400-9600] LBFD-00201803 /
Special UARFCNs: TDLBFD-00201803
none LOFD-001019 /
3GPP TS 25.104 LBFD-002009 /
and 3GPP TS TDLBFD-002009
Indicates the
working mode
supported by the LBFD-00201803 /
UTRAN in the TDLBFD-00201803
current UARFCN. NO NO No TDLOFD-001078

TDD/FDD mode of TDLOFD-001019
the inter-RAT LOFD-002002 /
UARFCN = DL
UARFCN - 600;
Band 8: UL
UARFCN = DL
UARFCN - 225;
Band 9: UL
UARFCN = DL
UARFCN - 475;
The default UL
UARFCN is
calculated as
follows if the DL
frequency is a
special one:
Band 2: UL
UARFCN = DL
UARFCN - 400;
Band 4: UL
UARFCN = DL
UARFCN - 300;
Band 5: UL
UARFCN = DL
UARFCN - 225;
Band 6: UL
UARFCN = DL
UARFCN - 225;
Band 7: UL
UARFCN = DL
UARFCN - 225;
For a TDD UTRAN
cell, the UL
UARFCN is the
same as the DL LBFD-00201803 /
UARFCN. For TDLBFD-00201803
TS 25.104 and TDLOFD-001019
[9500-9600] and
[10050-10125]
Special UARFCNs:
none
Band 2:
Normal UARFCNs:
[9250-9550] and
[9650-9950]
Special UARFCNs:
none
Band 3:
Normal UARFCNs:
[9550-9650]
Special UARFCNs:
none
Band 4:
Normal UARFCNs:
[12850-13100]
Special UARFCNs:
(2112, 2137, 2162,
2187, 2212, 2237,
2262, 2287, 2312,
2337)
Band 5:
Normal UARFCNs:
[11500-12000]
Special UARFCNs:
none
Band 6:
Normal UARFCNs:
[9400-9600]
Special UARFCNs:
none
3GPP TS 25.104 TDLBFD-00201803
and 3GPP TS LOFD-001019 /
Indicates whether
to set the priority of
a cell assigned with
the UARFCN used
in cell reselection to LBFD-00201803 /
UTRAN. NO NO No TDLBFD-00201803
starts
measurements on
the UTRAN
frequency; then if
the signal quality of
some neighboring
cells meets the
related conditions,
the UE starts cell
reselection.
parameter is
smaller than the
UE starts the
measurements only
when the signal
quality of the
then if the signal
quality of some
neighboring cells
meets the related
conditions, the UE
starts cell
reselection.
Frequencies used
for different RATs
must be assigned
different cell LBFD-00201803 /
reselection TDLBFD-00201803
priorities. For LBFD-002009 /
Indicates the
maximum power
that the UE can
apply to
transmission on the
UTRAN frequency.
It is used in criteria
S to calculate the
compensated
power. For details,
25.104. NO NO No TDLBFD-00201803
Indicates the
frequency offset of
the cell on the
UTRAN frequency.
It determines the
probability of
triggering
reports for events TDLOFD-001019
B1 and B2. For TDLOFD-001022
minimum quality
cell on the UTRAN
frequency to
become a
candidate for
reselection. This
parameter is
applied only to
reselection to
UTRAN FDD cells.
A neighboring cell
on the UTRAN
frequency can
become a
candidate for
reselection only
when the signal
quality of the cell is
better than the
Indicates the RX
neighboring cell on
the UTRAN
frequency to
become a
candidate for
selection. It is
S and used in the
evaluation for cell
selection. During
the evaluation for
cell reselection, the
UE performs the
following
Measured RSRP
value of a
neighboring cell on
the frequency -
Value of this
parameter -
Compensated
a neighboring cell is
better than a
threshold for a time-
to-trigger,
reselection to the
Indicates the
minimum RX level
required for a
neighboring cell on
the UTRAN
frequency to
become a
candidate for
reselection if the
priority of the
frequency is higher
than that of the
serving frequency.
After
measurements are
started for
the UTRAN
frequency, the UE
reselects to a
neighboring cell on
the frequency only
if the RX level of
the cell is higher
than the value
specified by this
parameter for a
Indicates the
minimum RX level
required for a
neighboring cell on
the UTRAN
frequency to
become a
candidate for
reselection if the
priority of the
frequency is lower
than that of the
serving frequency.
After
measurements are
started for
the UTRAN
frequency, the UE
reselects to a
neighboring cell on
the frequency only
if the RX level of
the serving cell is
lower than a
specified threshold
is higher than the
value specified by
Indicates the
RSRQ-based
minimum RX level
required for a
neighboring cell on
the frequency to
become a
candidate for
reselection if the
RSRQ-based
priority of the
frequency is higher
than that of the
serving frequency.
After
measurements are
started for
the UTRAN
frequency, the UE
reselects to a
neighboring cell on
the frequency only
if the RSRQ-based
RX level of the cell
is higher than the
value specified by
Indicates the
RSRQ-based
minimum RX level
required for a
neighboring cell on
the frequency to
become a
candidate for
reselection if the
RSRQ-based
priority of the
frequency is lower
than that of the
serving frequency.
After
measurements are
started for
the frequency, the
UE reselects to a
cell on the
frequency only if
the RSRQ-based
RX level of the
serving cell is lower
than a specified
threshold and that
than the value
specified by this
parameter for a
coverage-based
inter-RAT PS
handovers, if
UtranFreqLayerMea
sSwitch is turned
on, the eNodeB
determines the
UTRAN frequency
to be delivered to a
UE based on PS
service priorities.
The eNodeB
delivers the UTRAN
frequency with the
highest PS priority
to the UE by
default.In blind
handovers to
UTRAN, the target
cell for a blind
handover is
selected based on
PS service
priorities. The cell
on the UTRAN
frequency with the
highest PS priority
is selected by
default.When this
parameter is set to
Priority_0 for a
UTRAN frequency,
the UTRAN
frequency is not
included in PS LOFD-001019 /
service priority TDLOFD-001019
arrangement. NO NO No TDLOFD-001078
if
UtranFreqLayerMea
sSwitch is turned
on, the eNodeB
determines the
UTRAN frequency
to be delivered to a
UE based on CS
service priorities.
The eNodeB
delivers the UTRAN
frequency with the
highest CS priority
to the UE by
default.In blind
handovers for
CSFB to UTRAN, if
UtranFreqLayerBlin
dSwitch is turned
on, the target cell
for a blind handover
is selected based
on CS service
on the UTRAN
frequency with the
highest CS priority
is selected by
default.When this
parameter is set to
Priority_0 for a
UTRAN frequency,
the UTRAN LOFD-001078 /
frequency is not TDLOFD-001078
included in CS TDLOFD-001033
service priority TDLOFD-001052
Indicates the
frequency priority
based on which the
eNodeB selects a
contains a
frequency in a
measurement
configuration. If a
blind redirection is
triggered and the
target neighboring
the eNodeB selects
a target frequency
based on this
priority. If a
measurement
configuration is to
be delivered, the
eNodeB
preferentially
delivers a
frequency with the
highest priority. If
this priority is set to
0 for a frequency, LOFD-001019 /
this frequency is not TDLOFD-001019
selected as the TDLOFD-001022
target frequency for TDLOFD-001033
a blind redirection. TDLOFD-001052
A larger value TDLOFD-001043
indicates a higher TDLOFD-001072
priority. NO NO No TDLOFD-001078
D mode based on
the CS+PS
combined service
priorities. The
eNodeB
preferentially
delivers the UTRAN
frequency with the
highest CS+PS
combined service
priority to the UE. In
blind CSFB to
UTRAN, if
UtranCsfbSteeringS
witch and
UtranFreqLayerBlin
dSwitch are turned
on, the target cell is
selected based on
the CS+PS
combined service
on the UTRAN
frequency with the
highest CS+PS
combined service
priority is
preferentially
selected. If this
parameter is set to
Priority_0(Priority LOFD-001088 /
0), the UTRAN TDLOFD-001088
frequency is not LOFD-001019 /
included in CS+PS TDLOFD-001019
combined service TDLOFD-001033
priority TDLOFD-001052

country code of the
external UTRAN
cell.
The PLMN consists
of the MCC and the
MNC.
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
For example, MCC
= 123, MNC = 45, LOFD-001019 /
network code of the
external UTRAN
cell.
The PLMN consists
of the MCC and the
MNC.
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
For example, MCC
= 123, MNC = 45, LOFD-001019 /
Indicates the RNC

ID of the external
UTRAN cell. The
28-bit UTRAN cell
ID is comprised of
the RNC cell ID and
the RNC ID that are
represented by the
bits and the most
respectively. The
formula for
calculating the
UTRAN cell ID is as
follows: UTRAN cell
ID = RNC ID x
65536 + RNC cell
Indicates the RNC
cell ID of an
external UTRAN
cell. It uniquely
identifies a cell
within an RNC. The
28-bit UTRAN cell
ID is comprised of
the RNC cell ID and
the RNC ID that are
represented by the
bits and the most
respectively. The
formula for
calculating the
UTRAN cell ID is as
follows: UTRAN cell
ID = RNC ID x
65536 + RNC cell
[9500-9600] and
[10050-10125]
Special UARFCNs:
none
Band 2:
Normal UARFCNs:
[9250-9550] and
[9650-9950]
Special UARFCNs:
none
Band 3:
Normal UARFCNs:
[9550-9650]
Special UARFCNs:
none
Band 4:
Normal UARFCNs:
[12850-13100]
Special UARFCNs:
(2112, 2137, 2162,
2187, 2212, 2237,
2262, 2287, 2312,
2337)
Band 5:
Normal UARFCNs:
[11500-12000]
Special UARFCNs:
none
Band 6:
Normal UARFCNs:
[9400-9600]
Special UARFCNs:
none
For details, see
3GPP TS 25.104
and 3GPP TS LOFD-001019 /
UARFCN = DL
UARFCN - 600;
Band 8: UL
UARFCN = DL
UARFCN - 225;
Band 9: UL
UARFCN = DL
UARFCN - 475;
The default UL
UARFCN is
calculated as
follows if the DL
frequency is a
special one:
Band 2: UL
UARFCN = DL
UARFCN - 400;
Band 4: UL
UARFCN = DL
UARFCN - 300;
Band 5: UL
UARFCN = DL
UARFCN - 225;
Band 6: UL
UARFCN = DL
UARFCN - 225;
Band 7: UL
UARFCN = DL
UARFCN - 225;
For a TDD UTRAN
cell, the UL
UARFCN is the
same as the DL
UARFCN. For
details, see 3GPP
TS 25.104 and LOFD-001019 /
[9500-9600] and
[10050-10125]
Special UARFCNs:
none
Band 2:
Normal UARFCNs:
[9250-9550] and
[9650-9950]
Special UARFCNs:
none
Band 3:
Normal UARFCNs:
[9550-9650]
Special UARFCNs:
none
Band 4:
Normal UARFCNs:
[12850-13100]
Special UARFCNs:
(2112, 2137, 2162,
2187, 2212, 2237,
2262, 2287, 2312,
2337)
Band 5:
Normal UARFCNs:
[11500-12000]
Special UARFCNs:
none
Band 6:
Normal UARFCNs:
[9400-9600]
Special UARFCNs:
none
For details, see
3GPP TS 25.104
and 3GPP TS
25.105. NO NO No None

mode of the LOFD-001019 /
Indicates whether
to set the routing
area code (RAC) of
the external UTRAN
must be set to
CFG(Configure) if
the external UTRAN
cell supports packet
switched (PS) LOFD-001019 /
LOFD-001019 /
TDLOFD-001019
LOFD-001034 /
TDLOFD-001034
LOFD-001052 /
TDLOFD-001052
TDLOFD-001033
TDLOFD-001043
routing area code. NO NO No TDLOFD-001078
Indicates the
primary DL
scrambles of the
external UTRAN
cell. For details, see LOFD-001019 /
LOFD-001022 /
TDLOFD-001022
Indicates the LAC LOFD-001068 /
of the external TDLOFD-001068
UTRAN cell. NO YES No TDLOFD-001078
Indicates the name
Indicates whether
the external UTRAN
cell supports single
radio voice call
continuity (SRVCC)
for both CS and PS
services. If this
parameter is set to
BOOLEAN_FALSE(
False), the external LOFD-001022 /
UTRAN cell does TDLOFD-001022
not support SRVCC LOFD-001019 /
for both CS and PS TDLOFD-001019
is configured based
on UtranDlArfcn,
and the downlink
frequency bands
are configured
based on this
parameter. If there
are multiple
frequency bands of
downlink
frequencies in the
frequency bands
are configured
based on the
priorities in
descending order.
The frequency band
priorities of an
external UTRAN
cell are determined
based on the
network planning of
an operator. It is
recommended that
the frequency band
values are arranged
in ascending order.
The frequency band
with the minimum
value is of the
the frequency band
with the maximum
value is of the
Indicates the
frequency band in
which the cell
operates. For
details about this
parameter, see
The MO removal is
successful even if
the MO does not
exist. An MO can
be added both by
the user and based
on the ANR
algorithm. If an
existed MO is to be
added, the MO is
modified when the
user performs the
addition, but it
cannot be added
based on the ANR
algorithm. The
preceding control
policy also applies
to the
UtranExternalCellPl
mn MO, which is a
child MO of the
UtranExternalCell
MO. When the
ANR-related MOs
are automatically
added based on the
ANR algorithm, this
parameter is set to
AUTO_MODE by
default. When the
ANR-related MOs
are added by the
can be set to
MANUAL_MODE. NO NO No LOFD-002002
Indicates the
threshold above
which a neighboring
cell is added to a
serving cell by ANR.
The threshold is the
percentage of the
number of
successful
handovers to the
total number of
handovers from the
serving cell to the
neighboring cell. In
this version, this
parameter is no
longer used
internally although it
supports setting
synchronization
between the M2000
and the eNodeB.
Avoid using this
be removed from LOFD-002001 /
later versions. NO NO No TDLOFD-002001
number of
successful
handovers to the
total number of
handovers from the
local cell to the
neighboring cell.
For example, an
external cell is
configured as a
neighboring cell for
all cells under an
eNodeB, this
neighboring cell
permits automatic
removal of the
neighboring
relationship by ANR
and its CtrlMode is
AutoMode. If the
success rate of
handovers from
each cell under the
eNodeB to this
neighboring cell is
lower than or equal
to this threshold
after a
measurement
period, the
corresponding
external cell and
the neighbor
relationship with
this cell are
automatically LOFD-002001 /
removed. NO NO No TDLOFD-002001
Indicates the
threshold for the
total number of
handovers to an
intra-RAT
neighboring cell,
above which ANR
begins to evaluate
the removal of the
neighboring relation
in the case of a low
handover success LOFD-002001 /
rate. NO NO No TDLOFD-002001
during which the
total number of
handovers to an
intra-RAT
neighboring cell is
measured by ANR
to evaluate the
removal of the
neighboring relation
in the case of a low
handover success LOFD-002001 /
rate. NO NO No TDLOFD-002001
Indicates the
number of periodic LOFD-002001 /
reports sent for fast LOFD-002002 /
Indicates the
interval at which
periodic LOFD-002001 /
reports are sent for LOFD-002002 /
fast ANR. NO NO No TDLOFD-002002
Indicates the fast
ANR checking
timer. When the
timer is expired, the
eNodeB LOFD-002001 /
automatically TDLOFD-002001
checks whether to LOFD-002002 /
disable fast ANR. NO NO No TDLOFD-002002
Indicates the
reference signal
received power
(RSRP) threshold
for intra-RAT fast
ANR. If the signal
quality in a
neighboring E-
UTRAN cell
reported by the UE
is lower than the
threshold, the cell is
not automatically
added as an
external cell of the LOFD-002001 /
eNodeB. NO NO No TDLOFD-002001
Indicates the
maximum allowed
number of UEs that
perform intra-RAT
measurements for
fast ANR. After the
number of UEs
performing intra-
RAT measurements
for fast ANR
reaches the
maximum number,
intra-RAT
measurements for
fast ANR will not be
performed on other LOFD-002001 /
Indicates the
maximum allowed
number of UEs that
perform inter-RAT
measurements for
fast ANR. After the
number of UEs
performing inter-
RAT measurements
for fast ANR
reaches the
maximum number,
inter-RAT
measurements for
fast ANR will not be
performed on other LOFD-002002 /
Indicates the
threshold above
which the eNodeB
enters the
monitoring state for
intra-RAT fast ANR.
The threshold is
expressed as the
number of UEs that
have performed
measurements for LOFD-002001 /
intra-RAT fast ANR. NO NO No TDLOFD-002001
Indicates the
threshold above
which the eNodeB
enters the
monitoring state for
inter-RAT fast ANR.
The threshold is
expressed as the
number of UEs that
have performed
measurements for LOFD-002002 /
inter-RAT fast ANR. NO NO No TDLOFD-002002
Indicates the mode
for optimizing
neighboring
relations. If this
parameter is set to
FREE, neighboring
relations are
optimized
automatically by
ANR. If this
parameter is set to
CONTROLLED,
neighboring
relations to be
added or removed
are reported to the
M2000 and then LOFD-002001 /
subject to manual TDLOFD-002001
processing for LOFD-002002 /
optimization. NO NO No TDLOFD-002002
measured for
neighbor
relationship removal
from a neighbor
relation table (NRT)
when the number of
neighbor
relationships in the
NRT has reached
the maximum
specification and a
new neighbor
relationship is to be
added to the NRT
by ANR. This
parameter is also
used to determine
external cell
removal from a
neighboring cell list
(NCL). Within four
consecutive
measurement
periods, if an
external cell is not
added to the NRT
as a neighboring
cell, and the local
eNodeB is not
configured with an
X2 interface with
the peer eNodeB
providing this
external cell, this LOFD-002001 /
external cell is TDLOFD-002001
removed from the LOFD-002002 /
NCL. NO NO No TDLOFD-002002
Indicates the
number of
handovers above
which a neighbor
removed from a
neighbor relation
table (NRT) when
the number of
neighbor
relationships in the
NRT has reached
the maximum
specification and a
new neighbor
added to the NRT
by ANR. In the
latest measurement
period for neighbor
relationship
removal, if the total
number of
handovers from the
local cell exceeds
the value of this
parameter, a
neighboring cell LOFD-002001 /
that is not detected TDLOFD-002001
by UEs is removed LOFD-002002 /
from the NRT. NO NO No TDLOFD-002002
used to enable or
disable proactive
PCI conflict
detection. Within a
specified duration
after this switch is
turned on, the
eNodeB delivers
measurement
configurations for
proactive PCI
conflict detection to
UEs that meet
specific
requirements. Then,
the eNodeB starts
the detection based
on the
measurement
reports from the LOFD-002007 /
Indicates the start

time of the active
PCI conflict
detection. If the
than or the same as
the start time, the
stop time is
assumed to be the LOFD-002007 /
Indicates the stop
time of the active
PCI conflict
detection. If the
than or the same as
the start time, the
stop time is
assumed to be the LOFD-002007 /
Indicates the
received signal
code power (RSCP)
threshold for fast
ANR with UTRAN.
in a neighboring
UTRAN cell
reported by the UE
is lower than the
not automatically
added as an
Indicates the
received signal
strength indicator
(RSSI) threshold for
fast ANR with
GERAN. If the
signal quality in a
neighboring
GERAN cell
reported by the UE
is lower than the
not automatically
added as an
Indicates the pilot

strength threshold
for fast ANR with
CDMA2000 1xRTT.
in a neighboring
CDMA2000 1xRTT
cell reported by the
UE is lower than
the threshold, the
cell is not
automatically added
as an external cell LOFD-002002 /
of the eNodeB. NO NO No TDLOFD-002002
Indicates the pilot

strength threshold
for fast ANR with
CDMA2000 HRPD.
in a neighboring
CDMA2000 HRPD
cell reported by the
UE is lower than
the threshold, the
cell is not
automatically added
as an external cell LOFD-002002 /
of the eNodeB. NO NO No TDLOFD-002002
neighboring cells
measured by the
ANR are added to
the NCL, and
neighboring cells
with the strongest
signals are added
to the neighboring
relation table (NRT)
simultaneously.Curr
ently, only the inter-
frequency
neighboring cell,
neighboring UTRAN
cell, and
neighboring
GERAN cell with
the strongest
signals can be
added to the NRT
by fast ANR, and
the intra-frequency
neighboring cell
and neighboring
CDMA2000 cell
with the strongest
signals cannot be
added to the NRT
by fast ANR.The
intra-frequency
neighboring cells
and neighboring
CDMA2000 cells
can only be added
to the NCL
regardless of the LOFD-002001 /
parameter setting. NO NO No TDLOFD-002001

number of the BF
antenna, it uniquely
identifies a RET
Indicates the
manufacturer of the
BF antenna. NO NO No None
Indicates the
cabinet number of
the RRU
connecting to the LOFD-001024 /
BF antenna. NO NO No TDLOFD-001024
Indicates the
subrack number of
the RRU
BF antenna. NO YES No TDLOFD-001024
Indicates the slot

number of the RRU
BF antenna. NO NO No TDLOFD-001024
Indicates the model LOFD-001024 /

of the BF antenna. NO NO No TDLOFD-001024
Indicates the
configured tilt of the
BF antenna. NO NO No None
Indicates the
beamwidth formed
after beamforming. NO NO No None
Indicates the
frequency band in
which the BF
antenna operates. NO NO No None
Indicates the type

of the BF antenna. NO NO No None
Indicates the
polarization mode
of the BF antenna. NO NO Yes None
Indicates the
beamwidth of the LOFD-001024 /
antenna element. NO NO Yes TDLOFD-001024
Indicates the
number of physical
antenna ports to
which the BF
antenna is
connected. NO NO Yes None
Indicates the
amplitude offset at
physical antenna
port 1 when the BF
antenna is used
and cell-specific
reference signals
are transmitted from
two ports. Each port
may consist of
multiple physical LOFD-001024 /
antenna ports. NO NO Yes TDLOFD-001024
Indicates the phase

offset at physical
antenna port 1
when the BF
antenna is used
and cell-specific
reference signals
may consist of
Indicates the
amplitude offset at
physical antenna
port 2 when the BF
antenna is used
and cell-specific
reference signals
may consist of
Indicates the phase

offset at physical
antenna port 2
when the BF
antenna is used
and cell-specific
reference signals
may consist of
Indicates the
amplitude offset at
physical antenna
port 3 when the BF
antenna is used
and cell-specific
reference signals
may consist of
Indicates the phase

offset at physical
antenna port 3
when the BF
antenna is used
and cell-specific
reference signals
may consist of
Indicates the
amplitude offset at
physical antenna
port 4 when the BF
antenna is used
and cell-specific
reference signals
may consist of
Indicates the phase

offset at physical
antenna port 4
when the BF
antenna is used
and cell-specific
reference signals
may consist of
Indicates the
amplitude offset at
physical antenna
port 1 when the BF
antenna is used
and cell-specific
reference signals
four ports. Each
port may consist of
Indicates the phase

offset at physical
antenna port 1
when the BF
antenna is used
and cell-specific
reference signals
four ports. Each
port may consist of
Indicates the
amplitude offset at
physical antenna
port 2 when the BF
antenna is used
and cell-specific
reference signals
four ports. Each
port may consist of
Indicates the phase

offset at physical
antenna port 2
when the BF
antenna is used
and cell-specific
reference signals
four ports. Each
port may consist of
Indicates the ID of
the file transfer
LAOFD-00100101
Indicates the LAOFD-00100102
identity of the CA LAOFD-00100201
group. It uniquely LAOFD-00100202
identifies a CA TDLAOFD-001003
group within an TDLAOFD-001002
eNodeB. YES YES No TDLAOFD-001004
Indicates the type
of the carrier
aggregation (CA)
group. If this
parameter is set to
FDD, only FDD
cells can be
configured into the
CA group. If this
parameter is set to
TDD_SAME_SA,
only TDD cells can
be configured into
the CA group and
they must have the
same uplink-
downlink subframe
configuration
(specified by the
SubframeAssignme
nt parameter) of
SA1 or SA2. If this
parameter is set to
TDD_DIFF_SA,
only TDD cells can
be configured into
the CA group and
they must have LAOFD-00100101
different uplink- LAOFD-00100102
downlink subframe LAOFD-00100201
configurations with LAOFD-00100202
one using SA1 and TDLAOFD-001003
the other using TDLAOFD-001002
SA2. NO NO No TDLAOFD-001004
LAOFD-00100101
Indicates the LAOFD-00100102
identity of the CA LAOFD-00100201
group. It uniquely LAOFD-00100202
identifies a CA TDLAOFD-001003
group within an TDLAOFD-001002
eNodeB. YES YES No TDLAOFD-001004
Indicates the local
cell identity. It
cell within an

for the algorithm for
periodically
updating cell IDs. If
this parameter is
set to
BOOLEAN_TRUE,
cell IDs are
periodically
updated, inserted
into the system
information, and
broadcast to the
associated UEs
once the time at
which the algorithm
begins to take LBFD-002009 /
effect is reached. NO NO No TDLBFD-002009
Indicates the time

at which the
algorithm for
periodically
updating cell IDs
begins to take
effect. If the switch
for the algorithm is
turned on, cell IDs
are periodically
updated, inserted
into the system
information, and
broadcast to the
associated UEs
once the time
specified by this
parameter is LBFD-002009 /
reached. NO NO No TDLBFD-002009
Indicates the period LBFD-002009 /

of updating cell IDs. NO NO No TDLBFD-002009
Indicates the
interval for
detecting license-
related alarms. The
eNodeB detects
license control
items every other
interval and reports
a license-related
alarm if the
corresponding
reporting condition LBFD-004014 /
is met. NO NO No TDLBFD-004014
Indicates the
threshold for
generating license
alarms. A license
alarm is generated
if the proportion of
the actually used
value to the
allocated value of
the license control
item exceeds this LBFD-004014 /
threshold. NO NO No TDLBFD-004014
Indicates the
interval for clearing
license alarms.
During this interval,
the eNodeB detects
license control
items and clears
license alarms if the
condition for
clearing license LBFD-004014 /
alarms is met. NO NO No TDLBFD-004014
Indicates the
threshold for
clearing license
alarms. A license
alarm is cleared if
the proportion of
the actually used
value to the
allocated value of
the license control
item is below this LBFD-004014 /
threshold. NO NO No TDLBFD-004014
Indicates reserved
32-bit switch
parameter 0 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
32-bit switch
parameter 1 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
32-bit switch
parameter 2 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 2 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 3 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 4 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 5 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 6 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 7 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 8 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
parameter 9 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
Indicates reserved
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
handover can be TDLBFD-00201801
triggered after the LBFD-00201802 /
handover TDLBFD-00201802
procedure is LBFD-00201804 /
complete. If this TDLBFD-00201804
switch is turned off, LBFD-00201805 /
blind handover TDLBFD-00201805
event A1 LOFD-001033 /
measurements are TDLOFD-001033
disabled. If a blind LOFD-001034 /
handover event TDLOFD-001034
conflicts with a TDLOFD-001035
handover LOFD-001052 /
procedure, an TDLOFD-001052
emergency blind LOFD-001053 /
handover cannot be TDLOFD-001053
triggered. LOFD-001088 /
EmcInterFreqBlind TDLOFD-001088
HoSwitch: If this LOFD-001089 /
switch is turned on, TDLOFD-001089
the eNodeB LOFD-001090 /
preferentially TDLOFD-001090
performs an inter- LOFD-001019 /
frequency blind TDLOFD-001019
handover when an LOFD-001020 /
emergency blind TDLOFD-001020
handover is LOFD-001043 /
triggered. If this TDLOFD-001043
switch is turned off, LOFD-001046 /
the eNodeB only TDLOFD-001046
performs an inter- LOFD-001072 /
RAT blind handover TDLOFD-001072
when an LOFD-001073 /
emergency blind TDLOFD-001073
handover is TDLBFD-002018
triggered. NO NO No TDLOFD-001022
CSFB are disabled.
LcsSrvccSwitch: If
on, an SRVCC
procedure is
triggered when a
UE receives a
CSFB instruction
during a VoIP
service. If this
an SRVCC
procedure is not
triggered when a
UE receives a
CSFB instruction
during a VoIP
service. LOFD-001022 /
AutoGapSwitch: If TDLOFD-001022
this switch is turned LOFD-001023 /
on and UEs support TDLOFD-001023
automatic LOFD-001033 /
measurement gap TDLOFD-001033
configurations on LOFD-001034 /
the target TDLOFD-001034
frequency, the LOFD-001019 /
eNodeB does not TDLOFD-001019
deliver gap LOFD-001020 /
configurations to TDLOFD-001020
UEs. If this switch is LOFD-001021 /
turned off, the TDLOFD-001021
eNodeB delivers TDLOFD-001052
gap configurations TDLOFD-001088
to UEs during all TDLOFD-001043
inter-frequency and TDLOFD-001072
inter-RAT TDLOFD-001046
measurements. NO NO No TDLOFD-001073
Indicates the DL
ICIC algorithm
switch. There are
four states.
DlIcicSwitch_OFF_
ENUM:Indicates
that DL ICIC is
disabled.
DlIcicDynamicSwitc
h_ON_ENUM:Indic
ates that dynamic
DL ICIC is enabled.
DlIcicStaticSwitch_
ON_ENUM:Indicate
s that static DL ICIC
is enabled.
DlIcicReuse3Switch
_ON_ENUM: This
state will be
removed in later
versions. In this
of this state is still
synchronized
between the M2000
and the eNodeB,
but it is no longer
using this state. NO NO No LOFD-00101401
frequency MLB can
be triggered to
construct and
optimize inter-
frequency
neighboring
relations with intra-
RAT cells.When this
switch is turned on
and event-triggered
ANR with UTRAN is
enabled, MLB to
UTRAN can be
triggered to
construct and
optimize inter-RAT
neighboring
relations with
UTRAN cells.When
on and event-
triggered ANR with
GERAN is enabled,
MLB to GERAN can
be triggered to
construct and
optimize inter-RAT
neighboring
relations with
GERAN cells.When
off, the neighboring
relation
construction and LOFD-002001 /
optimization based TDLOFD-002001
on MLB is not LOFD-002002 /
used to enable or
disable the
redirection
algorithm. This
switch does not
control redirection
or fast redirection
for CSFB.
GeranFlashRedirect
Switch: If this switch
and
GeranRedirectSwitc
h are turned on,
fast redirection to
GERAN can be
performed.
UranFlashRedirect
Switch: If this switch LBFD-002023 /
and TDLBFD-002023
UtranRedirectSwitc LBFD-002024 /
h are turned on, TDLBFD-002024
fast redirection to LOFD-00102901 /
UTRAN can be TDLOFD-00102901
performed. LOFD-001019 /
LoadBasedSwitch: TDLOFD-001019
If this switch is LOFD-001020 /
turned on, load TDLOFD-001020
based redirection LOFD-001021 /
can be performed. NO NO No TDLOFD-001021
on, the eNodeB can
dynamically adjust
the GERAN
handover
parameters to
decrease the
number of
abnormal
handovers
(including
premature
handovers and
delayed
handovers), thereby
increasing the
success rate of
handovers to
GERAN. If this
the adjustment is
not performed.
UEMroSwitch: If
on, the eNodeB can
dynamically adjust
the UE handover
parameters to
decrease the
number of ping-
pong handovers,
thereby increasing
the UEs' handover
success rate. If this
the adjustment is LOFD-002005 /
not performed. NO NO No TDLOFD-002005

for the TCP Proxy
Enhancer (TPE)
algorithm. The TPE
algorithm increases
the rates of TCP
services by
measures such as
ACK splitting. If this
the TPE algorithm
is enabled. In this
situation, the
algorithm is valid
only for UEs that
newly access or
reaccess the
network. If this
the TPE algorithm LOFD-001026
is disabled. NO NO No TDLOFD-001028
This parameter will
be removed in later
versions. In this
still synchronized
between the M2000
and the eNodeB,
but it is no longer
used internally.
Therefore, avoid LBFD-00202202 /
using this TDLBFD-00202202
parameter. NO NO No LOFD-00101402

used to enable or
disable UL ICIC in
the frequency
domain. If this
UL ICIC in the
frequency domain
is disabled in the
eNodeB cells. If this
switch is set to
STATIC, static UL
ICIC in the
frequency domain
is enabled in the
eNodeB cells. If this
switch is set to
DYNAMIC, dynamic
UL ICIC in the
frequency domain
is enabled in the
eNodeB
cells,Dynamic ICIC
and static ICIC will
not take effect
when the UL
adaptive ICIC LBFD-00202202 /
switch of the cell is TDLBFD-00202202
turned on. NO NO No LOFD-00101402
Indicates the
location services
(LCS) switch.
OtdoaSwitch: If the
observed time
difference of arrival-
based (OTDOA-
based) positioning
is enabled. If the
OTDOA-based
positioning is LOFD-001047 /
). If this switch is
turned on, the
scheduling
algorithm is notified
to limit the number
of resource blocks
(RBs) allocated to
the UE in the case
of uplink
congestion.
According to the
related
specifications,
however, the
scheduling
algorithm cannot
decide how many
RBs to be allocated
to each bearer. The
number of RBs that
each non-GBR
bearer can use is
determined based
on the prioritized bit
rates (PBRs) and
priorities of the
associated logical
channels rather
than based on
UlschPriorityFactor.
As a result, if this
fairness and
differentiation for
combined services
of a UE may be LOFD-00301102 /
affected. NO NO No TDLOFD-00301102
for reporting the
PCI conflict alarm. If
on, an alarm is
reported in case of
PCI collision or PCI
confusion to notify
users. If this switch
is turned off, alarms
related to PCI
conflict are not LOFD-002007 /

used to enable or
disable the
eNodeB-level
energy
conservation
function. This
function is achieved
through the symbol-
based power
amplifier (PA)
shutdown. Symbol-
based PA shutdown
is applicable in
single-mode
eNodeBs. If this
the eNodeB shuts
down power
amplifiers (PAs) on
the corresponding
RF unit when it
detects no signal
transmitted on
OFDM symbols in
DL subframes. This
reduces static
power consumption
and hence
conserves energy LOFD-001070 /
for the eNodeB. NO NO No TDLOFD-001070
reports. If this
the eNodeB cannot
send RAN-
INFORMATION-
REQUEST PDUs to
UTRAN cells to
request multiple
event-driven
reports.
GERAN_RIM_SWI
TCH: Indicates the
switch used to
enable or disable
the RIM procedure
that requests event-
driven multiple
reports from
GERAN cells. If this
the eNodeB can
send RAN-
INFORMATION-
REQUEST PDUs to
CERAN cells to
request multiple
event-driven
reports. If this
the eNodeB cannot
send RAN-
INFORMATION- LOFD-001034 /
REQUEST PDUs to TDLOFD-001034
GERAN cells to LOFD-001052 /
request multiple TDLOFD-001052
event-driven LOFD-001053 /
reports. NO NO No TDLOFD-001053
h or
UtranFastAnrSwitch
is turned on for the
local eNodeB, the
local eNodeB will
ask the M2000 for
the PLMN list for a
cell after the UE
reports the CGI of
the cell during ANR
measurements. If
the UE has
reported the
PLMNlist, the local
eNodeB will not ask
the M2000 for the
PLMN list.
NBSGERANRANSh
aringSwitch: If this
some neighboring
BTSs provide cells
that work in GERAN
sharing mode. In
this situation, if
GeranEventAnrSwit
ch or
GeranFastAnrSwitc
h is turned on for
the local eNodeB, LOFD-002001 /
the local eNodeB TDLOFD-002001
will ask the M2000 LOFD-002002 /
for the PLMN list for TDLOFD-002002
a cell after the UE LOFD-001036 /
reports the CGI of TDLOFD-001036
the cell during ANR LOFD-001037 /
measurements. NO NO No TDLOFD-001037
sSwitch is turned
on. If
UtranFreqLayerMea
sSwitch is turned
on, the UTRAN
hierarchy-based
measurement
algorithm takes
effect for
measurements
related to coverage-
based and CSFB-
triggered handovers
from EUTRAN to
UTRAN. If
UtranFreqLayerBlin
dSwitch is turned
on, the UTRAN
hierarchy-based
blind-handover
algorithm takes
effect for coverage-
based and CSFB-
triggered blind
handovers from
EUTRAN to
UTRAN. If
UtranSrvccSwitch is
turned on, the
UTRAN SRVCC
hierarchy-based LOFD-001087
algorithm takes TDLOFD-001078
effect for SRVCC- TDLOFD-001022
triggered handovers TDLOFD-001033
from EUTRAN to TDLOFD-001052

controls whether to
enable the eNodeB
to broadcast
alerting messages
based on the
eNodeB-level
commercial mobile
alert system LOFD-001092 /
(CMAS). NO NO No TDLOFD-001092
controls whether to
enable the eNodeB
to periodically
select UEs
performing voice
services and
evaluate voice
quality based on
the voice quality
monitoring (VQM)
algorithm. It is
recommended that
this parameter be
set to
VQM_ALGO_SWIT
CH_ON when voice
services are
encoded based on
adaptive multirate
(AMR). NO NO No None
on the number of
is turned on, when
a user cannot
access the network
because of the user
number restriction,
the user can
preempt resources
of other lower-
priority users
served by the same
operator. If this
preemption is not
allowed.
InterOpUeNumPree
mptSwitch: This
parameter indicates
the switch used to
enable or disable
the inter-operator
preemption based
on the number of
is turned on, the
inter-operator
preemption based
on the number of
users is allowed. If
off, the inter-
operator
preemption based
on the number of LOFD-00102901 /
users is not TDLOFD-00102901
allowed. NO NO No LOFD-001113
for RF module
regular time sleep.
Cells are
unavailable after
the eNodeB enters
RF module regular
time sleep. After the
eNodeB exit RF
module regular time
sleep, it is in the LOFD-001025 /
normal state. NO NO No TDLOFD-001025
Indicates the time

for enter RF module LOFD-001025 /
regular time sleep. NO NO No TDLOFD-001025
Indicates the time
for exit RF module LOFD-001025 /
regular time sleep. NO NO No TDLOFD-001025
Indicates whether
the eNodeB is RF
module regular time
sleep. If this
parameter is RF
module regular time
sleep mode, all
cells are
unavailable. If this
parameter is
normal, the eNodeB
runs normally. NO NO Yes None
Indicates whether
an adaptive
asynchronization
UE is selected
when the adaptive
asynchronization
If a UE does not
transmit packets or
receive packets for
a period of time that
is longer than the
AdaptUnsyncTimer
Len parameter
value, the UE is a
candidate adaptive
asynchronization
UE. When this
parameter value is
to the UlSynTimer
parameter value,
the adaptive
asynchronization
function does not
take effect. NO NO No None
Indicates the
threshold for the
number of UEs that
can keep uplink
synchronization in a
cell or a baseband
processing unit.
When the number
of UEs that keep
uplink
synchronization in a
cell or a baseband
processing unit
exceeds the
threshold, the
eNodeB adaptively
enables some UEs
that do not transmit
or receive data for a
period of time that
is longer than the
AdaptUnsyncTimer
Len parameter
value to enter the
uplink
asynchronization
mod. In this case,
uplink control
channel resources
can be released for
other UEs. NO NO No None
Indicates the
proportion of the UL
licensed traffic to
the total licensed
traffic of the
eNodeB. The total
licensed traffic is
the sum of UL and
DL licensed traffic.
set to 100%, there LOFD-001036 /
is no DL licensed TDLOFD-001036
traffic, affecting LOFD-001037 /
service admission. NO NO No TDLOFD-001037
Indicates the mode
of traffic sharing
between the
operators in RAN
sharing scenarios.
set to SHARING, all
the operators share
the total traffic of
the eNodeB without
proportional limits. If
this parameter is
set to DEDICATE
and the
ENodeBSharingMo
de parameter is not
set to
INDEPENDENT, all
the operators share
the total traffic of
the eNodeB based
on specific
proportions.
However, the
vacant traffic of an LOFD-001036 /
operator can be TDLOFD-001036
used by other LOFD-001037 /
operators. NO NO No TDLOFD-001037
LOFD-001036 /
TDLOFD-001036
Indicates the
proportion of traffic
used by the
operator when the
eNodeB is shared
among operators.
This parameter
must be set based
on the contract
signed by
operators. If this
parameter is set to
0, services except LOFD-001036 /
emergency calls of TDLOFD-001036
this operator are LOFD-001037 /
not admitted. NO NO No TDLOFD-001037
Indicates the
proportion of traffic
that the operator
can share with
other operators
when the eNodeB
is shared among LOFD-001036 /
operators. NO NO No TDLOFD-001036
of MRO
measurements.
During the period,
the number of
handovers is
measured and
abnormal scenarios
(including
premature
handovers, delayed
handovers, ping-
pong handovers,
and handovers to
wrong cells) are
identified. After the
period elapses, the
eNodeB makes a
decision on
adjustment. NO NO No TDLOFD-002005
Indicates the
threshold for
enabling MRO
based on the
handover success
rate. MRO is
applied and
parameter
adjustment is
started only if the
success rate of
handovers from the
local cell to a
neighboring cell is
below this LOFD-002005 /
Indicates the
threshold of the
number of
handovers required
for enabling MRO.
MRO is applied and
parameter
adjustment is
started only if the
number of
handovers from the
local cell to a
neighboring cell
reaches this LOFD-002005 /
Indicates the time
threshold for ping-
pong handover. If a
UE is handed over
back to the source
cell after staying in
the target cell for a
period shorter than
this threshold, the
eNodeB decides
that a ping-pong
handover occurs
based on the
history information LOFD-002005 /
about this UE. NO NO No TDLOFD-002005
Indicates the
threshold for the
percentage of intra-
RAT ping-pong
handovers. If the
percentage of intra-
RAT ping-pong
handovers exceeds
the threshold,
parameter
adjustment is
performed. If the
percentage is lower
than the threshold,
parameter
adjustment is not LOFD-002005 /
Indicates the
threshold for the
percentage of
coverage-induced
abnormal
handovers to all
abnormal
handovers from the
serving cell to a
the percentage
exceeds this
threshold when an
MRO period
approaches its end,
the eNodeB does
not adjust MRO-
related parameters
of the neighboring
cell within this LOFD-002005 /
(RSRP) threshold
for the serving cell,
which is used to
identify coverage-
induced abnormal
handovers from the
serving cell to the
neighboring cell.
When a UE
successfully
reestablishes an
RRC connection
after a radio link
failure (RLF) in the
sends the eNodeB
an RLF report,
which includes the
RSRP values of the
serving and
the RSRP value of
the serving cell is
less than this
parameter value
and the RSRP
value of the
neighboring cell is
less than the
NeighborRsrpThd
parameter value,
this RLF is induced
by abnormal
coverage rather
than inappropriate
MRO LOFD-002005 /
configurations. NO NO No TDLOFD-002005
for a neighboring
cell, which is used
to identify
coverage-induced
abnormal
handovers from the
serving cell to the
neighboring cell.
When a UE
successfully
reestablishes an
RRC connection
after a radio link
failure (RLF) in the
sends the eNodeB
an RLF report,
which includes the
RSRP values of the
serving and
the RSRP value of
the serving cell is
less than the
ServingRsrpThd
parameter value
and the RSRP
value of the
neighboring cell is
less than this
parameter value,
this RLF is induced
by abnormal
coverage rather
than inappropriate
MRO LOFD-002005 /
configurations. NO NO No TDLOFD-002005
Indicates the
threshold for the
number of pingpong
handovers. If the
number of
consecutive ping-
pong handovers
reaches the
threshold, the UE is LOFD-002005 /
a ping-pong UE. NO NO No TDLOFD-002005
Indicates the index

of a simulated load
configuration. One
BS can store 10
simulated load
configurations,
which are identified
by the indexes. YES YES No None
Indicates the RB
usage threshold of
a simulated load
configuration. If the
RB usage of a cell
is below this
threshold, the
simulated load
scheduling is
performed. NO NO No None
Indicates the power

usage threshold of
a simulated load
power usage of a
cell is below this
threshold, the
simulated load
scheduling is
performed. NO NO No None
Indicates the
reporting period for
simulated load. The
value 0 indicates
that simulated load
is not reported. NO NO No None
Indicates the
measurement
period for simulated
load. The value 0
indicates that
simulated load is
not measured. NO NO No None
that is used to
control whether to
enable and disable
the frequency-
selective
scheduling in
simulated load
switch is set to ON,
the frequency-
selective
scheduling is
enabled. If the
the frequency-
diversity scheduling
is used. NO NO No None
Indicates whether
the TCP ACK LOFD-001037 /
control algorithm. NO NO No TDLOFD-001037
Indicates the
maximum downlink
throughput in the
TCP ACK control
algorithm. If this
parameter is set to
0, the downlink
throughput in the
TCP ACK control
algorithm is not LOFD-001026
under control. NO NO No TDLOFD-001028
Indicates the timer
length for the TCP
ACK control
algorithm. This
timer can be used
to control traffic of
the ACKs to uplink
TCP packets,
therefore
preventing traffic
bursts in the LOFD-001026
downlink. NO NO No TDLOFD-001028
used to enable or
disable the TCP
MSS function. If this
TCP packets are
transparently
transmitted without
being processed. If
on, the value of the
MSS field in each
packet for TCP link
setups can be LOFD-001026
modified. NO NO No TDLOFD-001028
Indicates the
threshold for the
value of the MSS
field in packets for
TCP link setups. If
the TCP MSS
the eNodeB first
checks the MSS
field in each packet
for TCP link setups.
If the value of the
MSS field is greater
than the predefined
threshold, the
eNodeB changes
the value of the
MSS field to the
predefined
threshold. Then, the
eNodeB
recalculates the
TCP checksum and
retransmits the
packet with
modified fields. For
other packets, the
eNodeB
transparently LOFD-001026
transmits them. NO NO No TDLOFD-001028
Indicates the time
delay of the frame TDLBFD-001007
start time for all TDLBFD-00100701
TDD E-UTRAN TDLBFD-00100702
cells under the TDLOFD-001026
eNodeB to the time TDLOFD-00102601
of the reference TDLOFD-00102602
clock. NO NO No TDLOFD-00102603
for forcibly
activating a TDD
cell. If this
parameter is set to
ON, a TDD cell can
be activated when
no clock resource is
available. If this
parameter is set to
OFF, a TDD cell
cannot be activated
when no clock
resource is LBFD-002008 /
available. NO NO No TDLBFD-002008
Indicates the
number of ports
that enable TCP LOFD-001026 /
acceleration. NO NO No TDLOFD-001028
Indicates port 1 to
which TPE is to be LOFD-001026 /
Indicates port 2 to
Indicates port 3 to
Indicates port 4 to
Indicates port 5 to
Indicates port 6 to
Indicates port 7 to
Indicates port 8 to
Indicates port 9 to
Indicates port 10 to
Indicates the
maximum UL voice
packet delay
variation allowed on
the Uu interface. If
the actual delay
variation of a UL
voice packet
exceeds this limit,
this packet is
regarded as lost
during the
evaluation of voice
quality impact
(VQI). The delay
variation is
measured at the
eNodeB PDCP
layer. NO NO No None
Enumeration
Feature Name Value Type GUI Value Range Number/Bit Unit
None Interval Type 5000~60000 N/A ms
None Interval Type 3~6 N/A None

DISABLE(Disable), DISABLE~0,
None Enumeration Type ENABLE(Enable) ENABLE~1 None
Public Key Character String

Infrastructure(PKI) Type 1~127 characters N/A None

Public Key SHA1(SHA1), SHA1~0,

Infrastructure(PKI) Enumeration Type SHA256(SHA256) SHA256~2 None
DEFAULT_MODE(
DEFAULT_MODE),
CFG_UPD_SIP(CF DEFAULT_MODE~
G_UPD_SIP), 0,
CFG_INIT_UPD_A CFG_UPD_SIP~1,
Public Key DDR(CFG_INIT_U CFG_INIT_UPD_A
Infrastructure(PKI) Enumeration Type PD_ADDR) DDR~2 None
Public Key
Infrastructure(PKI) IP Address Type Valid IP address N/A None
Public Key
Public Key ESN(ESN), ESN~0, MAC~1,

Infrastructure(PKI) Enumeration Type MAC(MAC), IP(IP) IP~2 None

Infrastructure(PKI) Type 0~0,2~2 characters N/A None



DATA_ENCIPHER
MENT(DATA_ENCI
PHERMENT),
DIGITAL_SIGNATU
RE(DIGITAL_SIGN DATA_ENCIPHER
ATURE), MENT~0,
KEY_AGREEMENT DIGITAL_SIGNATU
(KEY_AGREEMEN RE~1,
T), KEY_AGREEMENT
KEY_ENCIPHERM ~2,
Public Key ENT(KEY_ENCIPH KEY_ENCIPHERM
Infrastructure(PKI) Bit Field Type ERMENT) ENT~3 None
SHA1(SHA1),
Public Key MD5(MD5), SHA1~0, MD5~1,
Infrastructure(PKI) Enumeration Type SHA256(SHA256) SHA256~2 None
KEYSIZE1024(KEY
SIZE1024),
Public Key KEYSIZE2048(KEY KEYSIZE1024~0,
Infrastructure(PKI) Enumeration Type SIZE2048) KEYSIZE2048~1 None
Public Key
INVALID(Invalid),
INEFFECTIVE(Ineff
ective),
EXPIRED(Expired),
VALID(Normal), INVALID~0,
REVOKED(Revoke INEFFECTIVE~1,
d), EXPIRED~2,
FILENOTEXIST(Fil VALID~3,
e does not exist), REVOKED~4,
UNKNOWN(Unkno FILENOTEXIST~5,
None Enumeration Type wn) UNKNOWN~6 None
Character String
None Type 0~128 characters N/A None
Character String
Character String
Character String
Character String
Public Key
Infrastructure(PKI) Enumeration Type IKE(IKE), SSL(SSL) IKE~0, SSL~1 None

Character String
Character String
Character String
Character String
Character String
Character String
NORMAL(Normal),
ABNORMAL(Abnor
mal), NORMAL~0,
FILENOTEXIST(Fil ABNORMAL~1,
None Enumeration Type e does not exist) FILENOTEXIST~2 None
None Enumeration Type IKE(IKE), SSL(SSL) IKE~0, SSL~1 None

Character String
Character String
Character String
Character String
NORMAL(Normal),
ABNORMAL(Abnor
mal), NORMAL~0,
Character String

Character String
Character String
Character String
Character String
NORMAL(Normal),
ABNORMAL(Abnor
mal), NORMAL~0,
Character String

NORMAL(Normal),
CERTLOSS(Certific
ate Loss),
CERTDAMAGE(Ce
rtificate Damage),
UNKNOWFORMAT NORMAL~0,
(Unknow File CERTLOSS~1,
Format), CERTDAMAGE~2,
FAILED(Other failed UNKNOWFORMAT
None Enumeration Type Reason) ~3, FAILED~4 None
Character String
Character String
Character String
Public Key

Public Key
Infrastructure(PKI) Password Type 0~255 characters N/A None
Public Key
Infrastructure(PKI) Interval Type 0~65535 N/A None

Public Key DISABLE(Disable), DISABLE~0,
Infrastructure(PKI) Enumeration Type ENABLE(Enable) ENABLE~1 None
Public Key
Infrastructure(PKI) Interval Type 8~240 N/A h
Public Key
Public Key FTP(FTP),

Infrastructure(PKI) Enumeration Type LDAP(LDAP) FTP~0, LDAP~1 None

Public Key
Public Key DISABLE(Disable), DISABLE~0,
Infrastructure(PKI) Enumeration Type ENABLE(Enable) ENABLE~1 None
Public Key
Infrastructure(PKI) Interval Type 1~15 N/A day
Public Key
Infrastructure(PKI) Interval Type 7~180 N/A day
Public Key PROXY(PROXY),

Infrastructure(PKI) Enumeration Type CMP(CMP) PROXY~0, CMP~1 None
NOVERIFY(No
Verifying),
ALARM(Send an
Alarm If Verifying
CRL Failed),
DISCONNECT(Disc NOVERIFY~0,
Public Key onnect If Verifying ALARM~1,
Infrastructure(PKI) Enumeration Type CRL Failed) DISCONNECT~2 None
IPsec
Access Control List
(ACL) Interval Type 3000~4999 N/A None
IPsec
Access Control List Character String
(ACL) Type 0~127 characters N/A None
MANUAL_MODE(M
anual Mode),
AUTO_MODE(Auto MANUAL_MODE~0
None Enumeration Type Mode) , AUTO_MODE~1 None
MANUAL_CREATE MANUAL_CREATE
D(Manual Created), D~0,
AUTO_CREATED( AUTO_CREATED~
None Enumeration Type Auto Created) 1 None
IPv4/IPv6 Dual
Stack
Access Control List
IPv4/IPv6 Dual
Stack
Access Control List Character String
(ACL) Type 0~127 characters N/A None
MANUAL_MODE(M
anual Mode),
IPsec
Access Control List
IPsec
Access Control List
IPsec
Access Control List DENY(Deny), DENY~0,
(ACL) Enumeration Type PERMIT(Permit) PERMIT~1 None
IP(IP),
ICMP(ICMP),
IPsec TCP(TCP), IP~0, ICMP~1,
Access Control List UDP(UDP), TCP~6, UDP~17,
(ACL) Enumeration Type SCTP(SCTP) SCTP~132 None
IPsec
Access Control List
(ACL) IP Address Type Valid IP address N/A None
IPsec
Access Control List Wildcard Mask Valid wildcard of the
(ACL) Type IP address N/A None
IPsec
Access Control List
(ACL) Enumeration Type NO(No), YES(Yes) NO~0, YES~1 None
OP_LT(Less or
Equal),
OP_GT(Greater or
Equal),
OP_EQ(Equivalent) OP_LT~1,
, OP_NEQ(Not OP_GT~2,
IPsec Equivalent), OP_EQ~3,
Access Control List OP_RANGE(Range OP_NEQ~4,
(ACL) Enumeration Type ) OP_RANGE~5 None
IPsec
Access Control List
IPsec
Access Control List
IPsec
Access Control List
IPsec
Access Control List Wildcard Mask Valid wildcard of the
(ACL) Type IP address N/A None
IPsec
Access Control List
OP_LT(Less or
Equal),
OP_GT(Greater or
Equal),
, OP_NEQ(Not OP_GT~2,
IPsec Equivalent), OP_EQ~3,
IPsec
Access Control List
IPsec
Access Control List
IPsec
Access Control List
IPsec
Access Control List
IPsec
Access Control List
MANUAL_MODE(M
anual Mode),
OP_EQ(Equivalent)
,
IPsec OP_RANGE(Range OP_EQ~0,
Access Control List ), OP_NOVLAN(No OP_RANGE~1,
(ACL) Enumeration Type Vlan) OP_NOVLAN~2 None
IPsec
Access Control List
IPsec
Access Control List
IPv4/IPv6 Dual
Stack
Access Control List
IPv4/IPv6 Dual
Stack
Access Control List
IPv4/IPv6 Dual
Stack
Access Control List DENY(Deny), DENY~0,
(ACL) Enumeration Type PERMIT(Permit) PERMIT~1 None
IP6(IPv6),
IPv4/IPv6 Dual TCP(TCP), IP6~0, TCP~6,
Stack UDP(UDP), UDP~17,
Access Control List ICMP6(ICMP6), ICMP6~58,
(ACL) Enumeration Type SCTP(SCTP) SCTP~132 None
IPv4/IPv6 Dual
Stack
Access Control List
IPv4/IPv6 Dual
Stack
Access Control List
IPv4/IPv6 Dual
Stack
Access Control List
OP_LT(Less or
Equal),
OP_GT(Greater or
Equal),
IPv4/IPv6 Dual , OP_NEQ(Not OP_GT~2,
Stack Equivalent), OP_EQ~3,
IPv4/IPv6 Dual
Stack
Access Control List
IPv4/IPv6 Dual
Stack
Access Control List
IPv4/IPv6 Dual
Stack
Access Control List
IPv4/IPv6 Dual
Stack
Access Control List
IPv4/IPv6 Dual
Stack
Access Control List
OP_LT(Less or
Equal),
OP_GT(Greater or
Equal),
IPv4/IPv6 Dual , OP_NEQ(Not OP_GT~2,
Stack Equivalent), OP_EQ~3,
IPv4/IPv6 Dual
Stack
Access Control List
IPv4/IPv6 Dual
Stack
Access Control List
IPv4/IPv6 Dual
Stack
Access Control List
IPv4/IPv6 Dual
Stack
Access Control List
MANUAL_MODE(M
anual Mode),
Bidirectional
Forwarding
Detection Interval Type 0~95 N/A None

Bidirectional
Forwarding
Detection IP Address Type Valid IP address N/A None
Bidirectional
Forwarding
Detection IP Address Type Valid IP address N/A None
SINGLE_HOP(Singl
Bidirectional e Hop),
Forwarding MULTI_HOP(Multipl SINGLE_HOP~0,
Detection Enumeration Type e Hops) MULTI_HOP~1 None
Bidirectional
Forwarding
Detection Interval Type 10~1000 N/A ms
Bidirectional
Forwarding
Detection Interval Type 10~1000 N/A ms
Bidirectional
Forwarding
MAINTENANCE(M
Bidirectional aintenance),
Forwarding RELIABILITY(Relia MAINTENANCE~0,
Detection Enumeration Type bility) RELIABILITY~1 None
Bidirectional
Forwarding
None Enumeration Type NO(No), YES(Yes) NO~0, YES~1 None

ADMINDOWN(Adm
in Down), ADMINDOWN~0,
DOWN(Down), DOWN~1, INIT~2,
None Enumeration Type INIT(Init), UP(Up) UP~3 None
ASYNCHRONOUS
_MODE(Asynchron ASYNCHRONOUS
None Enumeration Type ous Mode) _MODE~2 None

NO_DIAGNOSTIC(
No Diagnostic),
CTRL_DECT_TIME
_EXPIRED(Control
Detection Time
Expired),
ECHO_FUNC_FAIL
ED(Echo Function
Failed),
NEIGHBOR_SIG_S
ESSION_DOWN(N
eighbor Signaled
Session Down),
FORDWARDING_P
LANE_RESET(For
warding Plane
Reset), NO_DIAGNOSTIC~
PATH_DOWN(Path 0,
Down), CTRL_DECT_TIME
CONCATENATED_ _EXPIRED~1,
PATH_DOWN(Conc ECHO_FUNC_FAIL
atenated Path ED~2,
Down), NEIGHBOR_SIG_S
ADMIN_DOWN(Ad ESSION_DOWN~3,
ministratively FORDWARDING_P
Down), LANE_RESET~4,
REVERSE_CONCA PATH_DOWN~5,
TENTATED_PATH_ CONCATENATED_
DOWN(Reverse PATH_DOWN~6,
Concatenated Path ADMIN_DOWN~7,
Down), REVERSE_CONCA
PEER_ADMIN_DO TENTATED_PATH_
WN(Peer DOWN~8,
Administratively PEER_ADMIN_DO
None Enumeration Type Down) WN~9 None
Bidirectional DRAFT4(DRAFT4),
Forwarding STANDARD(STAN DRAFT4~0,
Detection Enumeration Type DARD) STANDARD~1 None
DEFAULT(Default), DEFAULT~0,
Public Key SPECIFIC(Specific) SPECIFIC~1,
Infrastructure(PKI) Enumeration Type , NULL(NULL) NULL~2 None
Public Key
Public Key
Public Key
Ethernet
OAM(IEEE Character String
802.1ag) Type 1~43 characters N/A None
Ethernet
Ethernet
OAM(IEEE
802.1ag) Interval Type 1~8191 N/A None

Ethernet
OAM(IEEE
802.1ag) IP Address Type Valid IP address N/A None
Ethernet
Ethernet
Ethernet
OAM(IEEE
802.1ag) Enumeration Type NO(No), YES(Yes) NO~0, YES~1 None
Ethernet
OAM(IEEE
Ethernet
OAM(IEEE
10ms(10ms),
100ms(100ms),
Ethernet 1s(1s), 10s(10s), 10ms~2, 100ms~3,
OAM(IEEE 1min(1min), 1s~4, 10s~5,
802.1ag) Enumeration Type 10min(10min) 1min~6, 10min~7 None
Ethernet
Ethernet
OAM(IEEE
None Interval Type None N/A None
Ethernet
Ethernet
Ethernet
OAM(IEEE

BASE_BOARD(Bas
e Board),
ETH_COVERBOAR BASE_BOARD~0,
D(Ethernet Cover ETH_COVERBOAR
None Enumeration Type Board) D~5 None
ETH(Ethernet Port),
ETHTRK(Ethernet
None Enumeration Type Trunk) ETH~3, ETHTRK~4 None
Ethernet
OAM(IEEE DISABLE(Disable), DISABLE~0,
802.1ag) Enumeration Type ENABLE(Enable) ENABLE~1 None



UP(Up),
None Enumeration Type DOWN(Down) UP~0, DOWN~1 None
Ethernet
Ethernet
Ethernet
OAM(IEEE
Ethernet
OAM(IEEE
802.1ag) Compound Type 14 characters N/A None
NORMAL(Normal), NORMAL~1,
None Enumeration Type FAULT(Fault) FAULT~2 None
None Compound Type 14 characters N/A None

None IP Address Type Valid IP address N/A None
MASTER(Master), MASTER~0,
None Enumeration Type SLAVE(Slave) SLAVE~1 None
SAAL(SAALLNK),
SCTP(SCTPLNK),
SCTP6(SCTPLNK6 SAAL~0, SCTP~1,
None Enumeration Type ) SCTP6~2 None
FAULT(Fault), FAULT~1,
None Enumeration Type BLOCK(Block) BLOCK~3 None
UNUSED(Unused), UNUSED~0,
None Enumeration Type INUSE(In Use) INUSE~1 None
MANUAL_MODE(M
anual Mode),
BASE_BOARD(Bas
e Board),
E1_COVERBOARD
(E1 Cover Board), BASE_BOARD~0,
BACK_BOARD(Bac E1_COVERBOARD
k Board), ~3,
ETH_COVERBOAR BACK_BOARD~4,
PPP(PPP Link),
MPGRP(Multi-link
PPP Group),
ETH(Ethernet Port),
ETHTRK(Ethernet
Trunk), PPP~0, MPGRP~2,
LOOPINT(Loopbac ETH~3,
k Interface), ETHTRK~4,
SUBIF(Sub- LOOPINT~6,
None Enumeration Type interface) SUBIF~9 None

None Subnet Mask Type Valid Mask address N/A None
IPv4/IPv6 Dual
Stack Interval Type 1~65535 N/A None
IPv4/IPv6 Dual
Stack IP Address Type Valid IP address N/A None
IPv4/IPv6 Dual
IP6_DAD_OK(Valid
), IP6_DAD_OK~1,
IP6_DAD_TENTATI IP6_DAD_TENTATI
VE(Tentative), VE~2,
IP6_DAD_DUPLIC IP6_DAD_DUPLIC
ATED(Duplicate), ATED~4,
IP6_DAD_UNKNO IP6_DAD_UNKNO
None Enumeration Type W(Unknown) W~8 None
None Interval Type 0~4294967295 N/A s
IP-Based Multi-
mode Co-
Transmission on BS
side(eNodeB)
Chain Topology DISABLE(Disable), DISABLE~0,
Tree Topology Enumeration Type ENABLE(Enable) ENABLE~1 None
Chain Topology
Tree Topology IP Address Type Valid IP address N/A None
Self-configuration Enumeration Type ENABLE(Enable) ENABLE~1 None
IPPRECEDENCE(I
DiffServ QoS P Precedence), IPPRECEDENCE~
Support Enumeration Type DSCP(DSCP) 0, DSCP~1 None
DiffServ QoS
Support Interval Type 0~63 N/A None
DiffServ QoS
DiffServ QoS

BASE_BOARD(Bas
e Board),
EAP-TLS(EAP-TLS
None Enumeration Type authentic method) EAP-TLS~13 None

NULL(NULL),
LIC_OFF(License
Off),
NOTIFY_FAIL(Notifi
cation
Authentication
Failed), NULL~0,
NO_CERT(Certifica LIC_OFF~1,
te Not Exist), NOTIFY_FAIL~2,
PORT_DOWN(Tran NO_CERT~3,
None Enumeration Type sport Not Activated) PORT_DOWN~6 None
UNAUTHENTICAT
ED(Unauthenticate
d),
AUTHENTICATING
(Authenticating), UNAUTHENTICAT
AUTHENTIC_SUC ED~0,
CEED(Authenticate AUTHENTICATING
Succeed), ~1,
AUTHENTIC_FAIL( AUTHENTIC_SUC
Authenticate Fail), CEED~2,
DHCP_AUTHENTI AUTHENTIC_FAIL~
CATING(DHCP 3,
Activation DHCP_AUTHENTI
None Enumeration Type Authenticating) CATING~4 None

DiffServ QoS
VLAN Support
(IEEE 802.1p/q) Interval Type 0~7 N/A None
None Interval Type 0~7,255 N/A None

ALLPORT(All
Ports),
SINGLEPORT(Sing ALLPORT~0,
None Enumeration Type le Port) SINGLEPORT~1 None
E1_UNBA(E1
Unbalance),
E1_BA(E1 E1_UNBA~0,
None Enumeration Type Balance), T1(T1) E1_BA~1, T1~2 None
E1_DOUBLE_FRA
ME(E1 Double
Frames),
E1_CRC4_MULTI_
FRAME(E1 CRC4
Multiple Frames),
T1_SUPER_FRAM E1_DOUBLE_FRA
E(T1 Super ME~0,
Frames), E1_CRC4_MULTI_
T1_EXTENDED_S FRAME~1,
UPER_FRAME(T1 T1_SUPER_FRAM
Extended Super E~2,
Frames), T1_EXTENDED_S
E1_HYBRID_FRAM UPER_FRAME~3,
E(E1 Hybrid E1_HYBRID_FRAM
None Enumeration Type Frames) E~5 None
HDB3(E1 HDB3
Code), AMI(E1/T1
AMI Code),
B8ZS(T1 B8ZS HDB3~0, AMI~1,
None Enumeration Type Code) B8ZS~2 None
MASTER(Master
Mode),
SLAVE(Slave MASTER~0,
None Enumeration Type Mode) SLAVE~1 None

OK(Available),
LOCAL_LOOP(Loc
al Loop),
REMOTE_LOOP(R
emote Loop),
PAYLOAD_LOOP(P
ayload Loop),
SINGLE_CH_LOO
P(Single Channel
Loop), LOS(Loss of
Signal), AIS(Alarm OK~0,
Indication Signal), LOCAL_LOOP~1,
LFA(Loss of Frame REMOTE_LOOP~2
Alignment), ,
RA(Remote Alarm PAYLOAD_LOOP~
Indication), 3,
LMFA(Loss of SINGLE_CH_LOO
Multiframe P~4, LOS~5,
Alignment), AIS~6, LFA~7,
SLIP(Slip), RA~8, LMFA~9,
OTHERS(Other SLIP~10,
Fault), OTHERS~11,
BACKUP(Backup), BACKUP~12,
PHYSICAL_LOOP( PHYSICAL_LOOP~
None Enumeration Type Physical Loop) 13 None
EXECUTELINKTES
TFlAG_0(No Test),
EXECUTELINKTES EXECUTELINKTES
TFlAG_1(Offline TFlAG_0~0,
Test), EXECUTELINKTES
EXECUTELINKTES TFlAG_1~1,
TFlAG_2(Online EXECUTELINKTES
None Enumeration Type Test) TFlAG_2~2 None
None Interval Type 0~720 N/A min

BASE_BOARD(Bas
e Board),
E1_COVERBOARD BASE_BOARD~0,
(E1 Cover Board), E1_COVERBOARD
BACK_BOARD(Bac ~3,
None Enumeration Type k Board) BACK_BOARD~4 None
E1_UNBA(E1
Unbalance),
E1_BA(E1 E1_UNBA~0,
Balance), T1(T1), E1_BA~1, T1~2,
UNKNOWN(Unkno UNKNOWN~42949
None Enumeration Type wn) 67294 None
E1_DOUBLE_FRA
ME(E1 Double
Frames),
E1_CRC4_MULTI_
FRAME(E1 CRC4
Multiple Frames),
T1_SUPER_FRAM
E(T1 Super
Frames), E1_DOUBLE_FRA
T1_EXTENDED_S ME~0,
UPER_FRAME(T1 E1_CRC4_MULTI_
Extended Super FRAME~1,
Frames), T1_SUPER_FRAM
E1_MODIFY_CRC4 E~2,
_MULTIFRAME(Mo T1_EXTENDED_S
dify CRC4 Multiple UPER_FRAME~3,
Frames), E1_MODIFY_CRC4
E1_HYBRID_FRAM _MULTIFRAME~4,
E(E1 Hybrid E1_HYBRID_FRAM
Frames), E~5,
HDB3(E1 HDB3
Code), AMI(E1/T1
AMI Code),
B8ZS(T1 B8ZS HDB3~0, AMI~1,
Code), B8ZS~2,
1E-3(1E-3), 1E-
4(1E-4), 1E-5(1E- 1E-3~3, 1E-4~4,
None Enumeration Type 5), 1E-6(1E-6) 1E-5~5, 1E-6~6 None
ENDPOINT_GROU ENDPOINT_GROU
P(EndPoint Group), P~0,
ENDPOINT_NODE( ENDPOINT_NODE
Self-configuration Enumeration Type EndPoint Node) ~1 None
Self-configuration Interval Type 0~65535 N/A None

BASE_BOARD(Bas
e Board),
E1_COVERBOARD
k Board), ~3,
Self-configuration Enumeration Type Board) D~5 None
PPP(PPP Link),
MPGRP(Multi-link
PPP Group),
ETH(Ethernet Port), PPP~0, MPGRP~2,
ETHTRK(Ethernet ETH~3,
Trunk), ETHTRK~4,
Self-configuration Enumeration Type TUNNEL(Tunnel) TUNNEL~8 None
Self-configuration Enumeration Type IP(IP) IP~1 None
Character String
Self-configuration SCTPHOSTREF[] 0~2 N/A None

Character String
Self-configuration Type 0~11 characters N/A None
Self-configuration SCTPPEERREF[] 0~128 N/A None
Character String
USERPLANEHOST
Self-configuration REF[] 0~12 N/A None
Character String
USERPLANEPEER
Self-configuration REF[] 0~384 N/A None

Character String
Integrated Firewall DISABLE(Disable), DISABLE~0,

Character String
BASE_BOARD(Bas
e Board),
None Enumeration Type ETH(Ethernet Port) ETH~3 None
PASSIVE(Passive
Ethernet Mode),
OAM(IEEE ACTIVE(Active PASSIVE~0,
802.3ah) Enumeration Type Mode) ACTIVE~1 None
Ethernet
OAM(IEEE 10,20,50,100,200,5
802.3ah) Interval Type 00,1000 N/A ms
Ethernet
OAM(IEEE
802.3ah) Interval Type 64~1518 N/A byte
Ethernet
802.3ah) Enumeration Type ENABLE(Enable) ENABLE~1 None
Ethernet
802.3ah) Enumeration Type ENABLE(Enable) ENABLE~1 None
Ethernet
OAM(IEEE
802.3ah) Interval Type 1~60 N/A s
Ethernet
OAM(IEEE
802.3ah) Interval Type 1~65535 N/A None
Ethernet
OAM(IEEE
802.3ah) Interval Type 10~900 N/A s
Ethernet
OAM(IEEE
802.3ah) Interval Type 1~900 N/A None
OAM3AH_SESSIO
N_IDLE(Idle
Phase),
OAM3AH_SESSIO
N_DISCOVER(Disc
over Phase),
OAM3AH_SESSIO
N_DETECT(Detect OAM3AH_SESSIO
Phase), N_IDLE~0,
OAM3AH_SESSIO OAM3AH_SESSIO
N_LB_LOCAL(Loop N_DISCOVER~1,
back Response OAM3AH_SESSIO
Phase), N_DETECT~2,
OAM3AH_SESSIO OAM3AH_SESSIO
N_LB_REMOTE(Lo N_LB_LOCAL~3,
opback Start OAM3AH_SESSIO
None Enumeration Type Phase) N_LB_REMOTE~4 None


BASE_BOARD(Bas
e Board),
COPPER(Copper),
FIBER(Fiber),
AUTO(Automatic COPPER~0,
None Enumeration Type Detection) FIBER~1, AUTO~2 None
None Interval Type 46~1800 N/A byte
10M(10M),
100M(100M),
1000M(1000M),
AUTO(Automatic 10M~0, 100M~1,
None Enumeration Type Negotiation) 1000M~2, AUTO~3 None
FULL(Full Duplex),
AUTO(Automatic
None Enumeration Type Negotiation) FULL~1, AUTO~2 None
CLOSE(Close), CLOSE~0,
None Enumeration Type OPEN(Open) OPEN~1 None
None Interval Type 0~100 N/A per mill

UP(Up),
None Enumeration Type DOWN(Down)
NOLOOP(No UP~0, DOWN~1 None
Loop),
REMOTE(Remote NOLOOP~0,
None Enumeration Type Loopback) REMOTE~1 None
None Interval Type 0~4294967295 N/A packet
None Interval Type 0~4294967295 N/A byte/s

FORCE(Force),
AUTO(Automatic FORCE~0,
None Enumeration Type Negotiation) AUTO~1 None
FORCE(Force),
AUTO(Automatic FORCE~0,
10M(10M),
100M(100M),
1000M(1000M),
AUTO(Automatic 10M~0, 100M~1,
None Enumeration Type Negotiation) 1000M~2, AUTO~3 None
HALF(Half Duplex),
FULL(Full Duplex),
AUTO(Automatic HALF~0, FULL~1,
FORCE(Force),
AUTO(Automatic
Negotiation), FORCE~0,
UNKNOWN(Unkno AUTO~1,
10M(10M),
100M(100M),
1000M(1000M),
AUTO(Automatic
Negotiation), 10M~0, 100M~1,
UNKNOWN(Unkno 1000M~2, AUTO~3,
HALF(Half Duplex),
FULL(Full Duplex),
AUTO(Automatic
Negotiation), HALF~0, FULL~1,
UNKNOWN(Unkno AUTO~2,
None Interval Type 50~2000 N/A packet/s
None Interval Type 50~2000 N/A packet/s
UP(Up),
Character String
Ethernet Link
Aggregation(IEEE
802.3ad) Interval Type 0~2 N/A None
DISABLE(Disable
Ethernet Link LACP),
Aggregation(IEEE ENABLE(Enable DISABLE~0,
802.3ad) Enumeration Type LACP) ENABLE~1 None
Ethernet Link
Aggregation(IEEE DISABLE(Disable), DISABLE~0,
802.3ad) Enumeration Type ENABLE(Enable) ENABLE~1 None
BASE_BOARD(Bas
e Board),
Ethernet Link
Aggregation(IEEE
802.3ad) Interval Type 46~1800 N/A byte
UP(Up),
Character String
Character String


Ethernet Link
Aggregation(IEEE
Ethernet Link
Aggregation(IEEE
Ethernet Link
Aggregation(IEEE
Ethernet Link
Aggregation(IEEE
802.3ad) Enumeration Type NO(No), YES(Yes) NO~0, YES~1 None
BASE_BOARD(Bas
e Board),
UP(Up),
SHORT(Short
Timeout),
LONG(Long SHORT~0,
Timeout), LONG~1,
None Enumeration Type NULL(NULL) NULL~255 None
SHORT(Short
Timeout),
LONG(Long SHORT~0,
Timeout), LONG~1,

ARP(ARP),
ICMP(ICMP),
TCP(TCP), ARP~0, ICMP~1,
SYN(SYN), TCP~2, SYN~3,
Integrated Firewall Enumeration Type UDP(UDP) UDP~4 None
Integrated Firewall Enumeration Type ENABLE(Enable) ENABLE~1 None
Integrated Firewall Interval Type 1~4096 N/A packet/s

Transport DISABLE(Disable), DISABLE~0,
Overbooking Enumeration Type ENABLE(Enable) ENABLE~1 None
SINGLE_RATE(Sin
Enhanced gle Rate),
Transmission QoS DUAL_RATE(Dual SINGLE_RATE~0,
Management Enumeration Type Rate) DUAL_RATE~1 None
Enhanced
Transmission QoS
Management Interval Type 0~1200 N/A s
WHITELIST(Whiteli
st),
BLACKLIST(Blackli WHITELIST~1,
None Enumeration Type st) BLACKLIST~2 None




Ethernet OAM IEEE_802_1AG(IE
(IEEE 802.1ag) EE 802.1ag),
Ethernet OAM ITU_T_Y1731(ITU- IEEE_802_1AG~0,
(Y.1731) Enumeration Type T Y.1731) ITU_T_Y1731~1 None
PORTID_VLANID(B
ased on PortID and
VLANID),
PORTID_VLANID_
VLANPRI(Based on
PortID,VLANID and
VLAN PRI),
SA_DA_VLANID(B
ased on SA,DA and PORTID_VLANID~
VLANID), 1,
SA_DA_VLANID_V PORTID_VLANID_
LANPRI(Based on VLANPRI~2,
SA,DA,VLANID and SA_DA_VLANID~3,
VLAN PRI), SA_DA_VLANID_V
Ethernet OAM SA_DA(Based on LANPRI~4,
(Y.1731) Enumeration Type SA and DA) SA_DA~5 None
None Password Type 1~19 characters N/A None
IPSEC(IPSEC),
IPSECBYPASS(IPS IPSEC~0,
None Enumeration Type ECBYPASS) IPSECBYPASS~1 None



Character String
IPsec Type 0~31 characters N/A None
IPsec Interval Type 0,20~28800 N/A s
IPsec Interval Type 0,60~28800 N/A s
IPsec Interval Type 0~63 N/A None

Character String
IKE_V1(IKE V1), IKE_V1~1,

IPsec Enumeration Type IKE_V2(IKE V2) IKE_V2~2 None
MAIN(Main Mode),
AGGRESSIVE(Agg MAIN~2,
IPsec Enumeration Type ressive Mode) AGGRESSIVE~4 None
IP(IP Identify),
FQDN(Name
IPsec Enumeration Type Identify) IP~1, FQDN~2 None
IPsec IP Address Type Valid IP address N/A None
Character String
IPsec Password Type 0~127 characters N/A None
DISABLE(Disable),
PERIODIC(Periodic DISABLE~0,
IPsec Enumeration Type ) PERIODIC~2 None
IPsec Interval Type 10~3600 N/A s

MANUAL_MODE(M
anual Mode),
IPsec IP Address Type Valid IP address N/A None
IPv4/IPv6 Dual
Stack Character String
IPsec for IPv6 Type 1~15 characters N/A None
IPv4/IPv6 Dual
Stack
IPsec for IPv6 Interval Type 1~99 N/A None
IPv4/IPv6 Dual
Stack IKE_V1(IKE V1), IKE_V1~1,
IPsec for IPv6 Enumeration Type IKE_V2(IKE V2) IKE_V2~2 None
IPv4/IPv6 Dual MAIN(Main Mode),

Stack AGGRESSIVE(Agg MAIN~2,
IPsec for IPv6 Enumeration Type ressive Mode) AGGRESSIVE~4 None
IPv4/IPv6 Dual FQDN(Name
Stack Identify), IPV6(IPv6
IPsec for IPv6 Enumeration Type Identify) FQDN~2, IPV6~5 None
IPv4/IPv6 Dual
Stack
IPsec for IPv6 IP Address Type Valid IP address N/A None
IPv4/IPv6 Dual
IPv4/IPv6 Dual
Stack
IPsec for IPv6 Password Type 0~127 characters N/A None
IPv4/IPv6 Dual DISABLE(Disable),

Stack PERIODIC(Periodic DISABLE~0,
IPsec for IPv6 Enumeration Type ) PERIODIC~2 None
IPv4/IPv6 Dual
Stack
IPsec for IPv6 Interval Type 10~3600 N/A s
IPv4/IPv6 Dual
Stack
IPsec for IPv6 Interval Type 3~30 N/A s
IPv4/IPv6 Dual
Stack
MANUAL_MODE(M
anual Mode),
IPv4/IPv6 Dual
Stack
DES(DES),
3DES(3DES), DES~2, 3DES~3,
AES128(AES128), AES128~11,
AES192(AES192), AES192~12,
IPsec Enumeration Type AES256(AES256) AES256~13 None
MD5(MD5),
SHA1(SHA1),
AES_XCBC_96(AE MD5~4, SHA1~5,
IPsec Enumeration Type S_XCBC_96) AES_XCBC_96~6 None
PRE_SHARED_KE
Y(Pre-shared Key),
IKE_RSA_SIG(RSA PRE_SHARED_KE
Digital Certificate Y~8,
IPsec Enumeration Type Signature) IKE_RSA_SIG~9 None
DH_GROUP1(768-
bit Diffie-Hellman
Group),
DH_GROUP2(1024
-bit Diffie-Hellman
Group),
DH_GROUP14(204
8-bit Diffie-Hellman
Group), DH_GROUP1~6,
DH_GROUP15(307 DH_GROUP2~7,
2-bit Diffie-Hellman DH_GROUP14~14,
IPsec Enumeration Type Group) DH_GROUP15~15 None

HMAC_MD5(HMAC
_MD5),
HMAC_SHA1(HMA
C_SHA1), HMAC_MD5~14,
AES128_XCBC(AE HMAC_SHA1~15,
IPsec Enumeration Type S128_XCBC) AES128_XCBC~18 None

IP-Based Multi-
mode Co-
Transmission on BS
side(eNodeB)
2G/3G and LTE Co-
transmission Enumeration Type IP(IP) IP~1 None
BASE_BOARD(Bas
e Board),
E1_COVERBOARD
k Board), ~3,
PPP(PPP Link),
MPGRP(Multi-link
PPP Group),
Trunk), ETHTRK~4,
None Enumeration Type TUNNEL(Tunnel) TUNNEL~8 None
IP-Based Multi-
mode Co-
Transmission on BS
side(eNodeB)
2G/3G and LTE Co-
transmission Interval Type 0~15 N/A None

IP-Based Multi-
mode Co-
Transmission on BS
side(eNodeB)
2G/3G and LTE Co-
transmission IP Address Type Valid IP address N/A None
IP-Based Multi-
mode Co-
Transmission on BS
side(eNodeB)
2G/3G and LTE Co-
transmission Subnet Mask Type Valid Mask address N/A None

BASE_BOARD(Bas
None Enumeration Type e Board) BASE_BOARD~0 None
ETH(Ethernet Port),
TRUNK(Ethernet
None Enumeration Type Trunk) ETH~3, TRUNK~4 None
IP-Based Multi-
mode Co-
Transmission on BS
side(eNodeB)
IPv4/IPv6 Dual
Stack Enumeration Type IP(IP) IP~1 None
IP-Based Multi-
mode Co-
Transmission on BS
side(eNodeB)
IPv4/IPv6 Dual
IP-Based Multi-
mode Co-
Transmission on BS
side(eNodeB)
IPv4/IPv6 Dual
IP-Based Multi-
mode Co-
Transmission on BS
side(eNodeB)
IPv4/IPv6 Dual
Integrated Firewall Interval Type 10~1000 N/A None
PPP(PPP Link),
MPGRP(Multi-link
PPP Group),
ETH(Ethernet Port),
ETHTRK(Ethernet
Trunk), PPP~0, MPGRP~2,
LOOPINT(Loopbac ETH~3,
k Interface), ETHTRK~4,
SUBIF(Sub- LOOPINT~6,
IPV4(IPv4), IPV4~2048,
ARP(ARP), ARP~2054,
RARP(RARP), RARP~2101,
IPV6(IPv6), IPV6~34525,
802_1X(802.1X), 802_1X~34958,
LLDP(LLDP), LLDP~35020,
1588V2(1588V2), 1588V2~35063,
CFM(CFM), CFM~35074,
LACP(LACP), LACP~8915201,
None Enumeration Type 3AH(3AH) 3AH~8915203 None

ICMP(ICMP),
TCP(TCP), ICMP~1, TCP~6,
UDP(UDP), UDP~17,
None Enumeration Type SCTP(SCTP) SCTP~132 None
Character String
IPv4/IPv6 Dual
IPv4/IPv6 Dual NORMAL(Normal), NORMAL~0,

Stack Enumeration Type VLAN(Vlan) VLAN~1 None
BASE_BOARD(Bas
ETH(Ethernet Port),
TRUNK(Ethernet
Trunk),
IPv4/IPv6 Dual LOOPIF(Loopback ETH~3, TRUNK~4,
Stack Enumeration Type Interface) LOOPIF~6 None
IPv4/IPv6 Dual
IPv4/IPv6 Dual
IPv4/IPv6 Dual
Stack Interval Type 1280~1800 N/A byte
UP(UP),


PPP(PPP Link),
MPGRP(Multi-link
PPP Group),
ETH(Ethernet Port),
ETHTRK(Ethernet PPP~0, MPGRP~2,
Trunk), ETH~3,
LOOPINT(Loopbac ETHTRK~4,
k Interface), LOOPINT~6,
FIXED(Fixed QoS),
None Enumeration Type ANY(Any QoS) FIXED~0, ANY~1 None
HQ(High Quality),
None Enumeration Type LQ(Low Quality) HQ~0, LQ~1 None

None Interval Type 0~4294967294 N/A Kbit/s

NORMAL(Normal),
FAULT(Fault), NORMAL~0,
CHECK_DISABLE FAULT~1,
D(IP Path Check CHECK_DISABLE
None Enumeration Type Disabled) D~2 None
Character String
BASE_BOARD(Bas
e Board),
E1_COVERBOARD
k Board), ~3,
IPv4/IPv6 Dual
Stack
S1 and X2 over
IPv6 Interval Type 0~65535 N/A None
IPv4/IPv6 Dual
Stack
S1 and X2 over DISABLE(Disable), DISABLE~0,
IPv6 Enumeration Type ENABLE(Enable) ENABLE~1 None
IPv4/IPv6 Dual
Stack
S1 and X2 over
IPv4/IPv6 Dual
Stack
S1 and X2 over
IPv4/IPv6 Dual
Stack
S1 and X2 over FIXED(Fixed QoS),
IPv6 Enumeration Type ANY(Any QoS) FIXED~0, ANY~1 None
IPv4/IPv6 Dual
Stack
S1 and X2 over
IPv4/IPv6 Dual
Stack
S1 and X2 over
IPv6 IP Address Type Valid IP address N/A None
IPv4/IPv6 Dual
Stack
S1 and X2 over

IPv4/IPv6 Dual
Stack
S1 and X2 over Character String
IPv6 Type 0~47 characters N/A None
Different Transport
Paths based on
QoS Grade IP Address Type Valid IP address N/A None
Different Transport
Paths based on
Different Transport
Paths based on HQ(High Quality),
QoS Grade Enumeration Type LQ(Low Quality) HQ~0, LQ~1 None
Different Transport
Paths based on
IP Performance
Monitoring Interval Type 0~65535 N/A None
IP Performance
Monitoring IP Address Type Valid IP address N/A None
IP Performance
Monitoring IP Address Type Valid IP address N/A None
IP Performance
IP Performance UP(Uplink),
Monitoring Enumeration Type BIDIR(Bidirection) UP~1, BIDIR~2 None
None Interval Type -10000~10000 N/A ms

None Interval Type -10000~10000 N/A ms
IDLE(IDLE),
ACTING(ACTING), IDLE~0,
PMUP(IP PM UP), ACTING~1,
DEACTING(DEACT PMUP~2,
ING), DEACTING~3,
None Enumeration Type UNKNOWN(NULL) UNKNOWN~255 None
IDLE(IDLE),
ACTING(ACTING), IDLE~0,
PMUP(IP PM UP), ACTING~1,
DEACTING(DEACT PMUP~2,
ING), DEACTING~3,
FOUR_TUPLE(FO
UR_TUPLE),
IP Performance THREE_TUPLE(TH FOUR_TUPLE~0,
Monitoring Enumeration Type REE_TUPLE) THREE_TUPLE~2 None
IP Performance
Monitoring Enumeration Type NO(No), YES(Yes) NO~0, YES~1 None
IP Performance
None Compound Type None N/A None

IPPMVER_V1(Versi
on 1.0),
IPPMVER_V2(Versi IPPMVER_V1~1,
None Enumeration Type on 2.0) IPPMVER_V2~2 None
BASE_BOARD(Bas
e Board),
UNCHANNELLED_
COVERBOARD(Un
channelled Cover
Board), BASE_BOARD~0,
E1_COVERBOARD UNCHANNELLED_
(E1 Cover Board), COVERBOARD~2,
k Board), ~3,
PPP(PPP Link),
MPGRP(Multi-link
PPP Group),
TUNNEL(Tunnel), PPP~0, MPGRP~2,
IPOA(IP Over ATM TUNNEL~8,
IP Route Backup Enumeration Type Interface) IPOA~10 None
NEXTHOP(Next
Hop), IF(Exit
IP Route Backup Enumeration Type Interface) NEXTHOP~0, IF~1 None

IP Route Backup IP Address Type Valid IP address N/A None
IP Route Backup Subnet Mask Type Valid Mask address N/A None
IP Route Backup IP Address Type Valid IP address N/A None

IP Route Backup Interval Type 1~255 N/A None
Character String
STATICHOST(Stati
c Host Route),
STATICGATEWAY(
Static Gateway
Route),
HOST(Dynamic STATICHOST~1,
Host Route), STATICGATEWAY~
GATEWAY(Dynami 2, HOST~3,
None Enumeration Type c Gateway Route) GATEWAY~4 None
PPP(PPP Link),
MPGRP(Multi-link
PPP Group),
ETH(Ethernet Port),
ETHTRK(Ethernet
Trunk),
LOOPINT(Loopbac
k Interface), PPP~0, MPGRP~2,
VI(Virtual Interface), ETH~3,
TUNNEL(Tunnel), ETHTRK~4,
SUBIF(Subif), LOOPINT~6, VI~7,
IPOA(IP Over ATM TUNNEL~8,
None Enumeration Type Interface) SUBIF~9, IPOA~10 None

IPv4/IPv6 Dual
IPv4/IPv6 Dual
IPv4/IPv6 Dual NEXTHOP(Next

Stack Enumeration Type Hop) NEXTHOP~0 None
IPADDR6_TYPE_G
LOBAL_UNICAST(
Global Unicast IPADDR6_TYPE_G
Address), LOBAL_UNICAST~
IPADDR6_TYPE_LI 0,
IPv4/IPv6 Dual NK_LOCAL(Link IPADDR6_TYPE_LI
Stack Enumeration Type Local Address) NK_LOCAL~2 None
IPv4/IPv6 Dual
IPv4/IPv6 Dual
IPv4/IPv6 Dual
STATICHOST(Stati
c Host Route),
STATICGATEWAY(
Static Gateway
Route),
HOST(Dynamic STATICHOST~1,
Host Route), STATICGATEWAY~
GATEWAY(Dynami 2, HOST~3,
None Enumeration Type c Gateway Route) GATEWAY~4 None
IPv4/IPv6 Dual Character String

Stack Type 0~47 characters N/A None

BASE_BOARD(Bas
e Board),
ETH(Ethernet Port),
ETHTRK(Ethernet
IPsec Enumeration Type Trunk) ETH~3, ETHTRK~4 None
Character String
Ipsec Type 1~15 characters N/A None
MANUAL_MODE(M
anual Mode),
IPv4/IPv6 Dual
Stack
IPv4/IPv6 Dual
MANUAL_MODE(M
anual Mode),
IPsec Tunnel
Backup Interval Type 0~49 N/A None
IPsec Tunnel Character String

Backup Type 1~15 characters N/A None
IPsec Tunnel
IPsec Tunnel Character String

Backup Type 1~15 characters N/A None
IPsec Tunnel
IPsec Tunnel
IPsec Tunnel
MASTER(Master
IPSec Policy),
SLAVE(Slave IPSec MASTER~0,
None Enumeration Type Policy) SLAVE~1 None
Character String

Character String
Character String
DISABLE(Disable),
PFS_GROUP1(768
-bit Diffie-Hellman
Group),
PFS_GROUP2(102 DISABLE~0,
4-bit Diffie-Hellman PFS_GROUP1~1,
IPsec Enumeration Type Group) PFS_GROUP2~2 None
GLOBAL(Global
Configuration),
LOCAL(Local GLOBAL~0,
IPsec Enumeration Type Configuration) LOCAL~1 None

0,1843200~429496
IPsec Interval Type 7295 N/A KB
MANUAL_MODE(M
anual Mode),

WND_DISABLE(0), WND_DISABLE~0,
WND_32(32), WND_32~1,
WND_64(64), WND_64~2,
WND_128(128), WND_128~128,
WND_256(256), WND_256~256,
WND_512(512), WND_512~512,
WND_1024(1024), WND_1024~1024,
WND_2048(2048), WND_2048~2048,
IPsec Enumeration Type WND_4096(4096) WND_4096~4096 None
Character String
IPV4(IPv4),
None Enumeration Type IPV6(IPv6) IPV4~4, IPV6~6 None
Character String
Character String
DISABLE(Disable),
PFS_GROUP1(768
-bit Diffie-Hellman
Group),
4-bit Diffie-Hellman PFS_GROUP1~1,
None Enumeration Type Group) PFS_GROUP2~2 None
GLOBAL(Global
Configuration),
LOCAL(Local GLOBAL~0,
None Enumeration Type Configuration) LOCAL~1 None
0,1843200~429496
None Interval Type 7295 N/A KB
MANUAL_MODE(M
anual Mode),
Character String
TUNNEL(Tunnel),
TRANSPORT(Tran TUNNEL~0,
IPsec Enumeration Type sport) TRANSPORT~1 None
AH(AH Protocol),
ESP(ESP Protocol),
AH_ESP(AH/ESP AH~0, ESP~1,
IPsec Enumeration Type Protocol) AH_ESP~2 None
MD5(MD5),
SHA1(SHA1), AES-
XCBC-MAC-
96(AES-XCBC- MD5~1, SHA1~2,
MAC-96), AES-XCBC-MAC-
IPsec Enumeration Type SHA256(SHA256) 96~5, SHA256~12 None
NULL(NULL),
MD5(MD5),
SHA1(SHA1), AES-
XCBC-MAC- NULL~0, MD5~1,
96(AES-XCBC- SHA1~2, AES-
MAC-96), XCBC-MAC-96~5,
IPsec Enumeration Type SHA256(SHA256) SHA256~12 None
NULL(NULL),
DES(DES), NULL~0, DES~1,
3DES(3DES), 3DES~2,
AES128(AES128), AES128~6,
AES192(AES192), AES192~7,
IPsec Enumeration Type AES256(AES256) AES256~8 None


DISABLE(DISABLE
), DISABLE~0,
None Enumeration Type ENABLE(ENABLE) ENABLE~1 None

Character String
RESERVED(Reser
ved),
CHASSIS_COMPO
NENT(Chassis
Component),
INTERFACE_ALIA RESERVED~0,
S(Interface Alias), CHASSIS_COMPO
PORT_COMPONE NENT~1,
NT(Port INTERFACE_ALIA
Component), S~2,
MAC_ADDR(MAC PORT_COMPONE
Address), NT~3,
NETWORK_ADDR( MAC_ADDR~4,
Network Address), NETWORK_ADDR
INTERFACE_NAM ~5,
E(Interface Name), INTERFACE_NAM
LOCALLY_ASSIGN E~6,
ED(Locally LOCALLY_ASSIGN
None Enumeration Type Assigned) ED~7 None
Character String
IPV4(IPv4), IPV4~1, IPV6~2,
IPV6(IPv6), OTHER~42949672
None Enumeration Type OTHER(Other) 95 None
seFLHD),
10BaseFLFD(10Ba OTHER~0, AUI~1,
seFLFD), 10Base5~2,
100BaseT4(100Bas Foirl~3,
eT4), 10Base2~4,
100BaseTXHD(100 10BaseT~5,
BaseTXHD), 10BaseFP~6,
100BaseTXFD(100 10BaseFB~7,
BaseTXFD), 10BaseFL~8,
100BaseFXHD(100 10Broad36~9,
BaseFXHD), 10BaseTHD~10,
100BaseFXFD(100 10BaseTFD~11,
BaseFXFD), 10BaseFLHD~12,
100BaseT2HD(100 10BaseFLFD~13,
BaseT2HD), 100BaseT4~14,
100BaseT2FD(100 100BaseTXHD~15,
BaseT2FD), 100BaseTXFD~16,
1000BaseXHD(100 100BaseFXHD~17,
0BaseXHD), 100BaseFXFD~18,
1000BaseXFD(100 100BaseT2HD~19,
0BaseXFD), 100BaseT2FD~20,
1000BaseLXHD(10 1000BaseXHD~21,
00BaseLXHD), 1000BaseXFD~22,
1000BaseLXFD(10 1000BaseLXHD~23
00BaseLXFD), ,
1000BaseSXHD(10 1000BaseLXFD~24
00BaseSXHD), ,
1000BaseSXFD(10 1000BaseSXHD~2
00BaseSXFD), 5,
1000BaseCXHD(10 1000BaseSXFD~26
00BaseCXHD), ,
1000BaseCXFD(10 1000BaseCXHD~2
00BaseCXFD), 7,
1000BaseTHD(100 1000BaseCXFD~28
0BaseTHD), ,
1000BaseTFD(100 1000BaseTHD~29,
None Enumeration Type 0BaseTFD) 1000BaseTFD~30 None
Character String
Character String
RESERVED(Reser
ved),
INTERFACE_ALIA
S(Interface Alias),
PORT_COMPONE RESERVED~0,
NT(Port INTERFACE_ALIA
Component), S~1,
MAC_ADDR(MAC PORT_COMPONE
Address), NT~2,
NETWORK_ADDR( MAC_ADDR~3,
Network Address), NETWORK_ADDR
INTERFACE_NAM ~4,
E(Interface Name), INTERFACE_NAM
AGENT_CIRCUIT_I E~5,
D(Agent Circuit ID), AGENT_CIRCUIT_I
LOCALLY_ASSIGN D~6,
ED(Locally LOCALLY_ASSIGN
None Enumeration Type Assigned) ED~7 None



BASE_BOARD(Bas
e Board),

OTHER(Other),
REPEATER(Repeat
er),
MACBRIDGE(MAC
Bridge),
WLANAP(WLAN
Access Point),
ROUTER(Router),
TELEPHONE(Telep
hone),
DOCSIS(DOCSIS
Cable Device),
STATIONONLY(Stat OTHER~0,
ion Only), REPEATER~1,
CVLANBRIDGE(C- MACBRIDGE~2,
VLAN Component WLANAP~3,
of a VLAN Bridge), ROUTER~4,
SVLANBRIDGE(S- TELEPHONE~5,
VLAN Component DOCSIS~6,
of a VLAN Bridge), STATIONONLY~7,
TPMR(Two-Port CVLANBRIDGE~8,
MAC Relay), SVLANBRIDGE~9,
RESERVED(Reser TPMR~10,
None Bit Field Type ved) RESERVED~16 None
OTHER(Other),
REPEATER(Repeat
er),
MACBRIDGE(MAC
Bridge),
WLANAP(WLAN
Access Point),
ROUTER(Router),
TELEPHONE(Telep
hone),
DOCSIS(DOCSIS
Cable Device),
STATIONONLY(Stat OTHER~0,
ion Only), REPEATER~1,
CVLANBRIDGE(C- MACBRIDGE~2,
VLAN Component WLANAP~3,
of a VLAN Bridge), ROUTER~4,
SVLANBRIDGE(S- TELEPHONE~5,
VLAN Component DOCSIS~6,
of a VLAN Bridge), STATIONONLY~7,
TPMR(Two-Port CVLANBRIDGE~8,
MAC Relay), SVLANBRIDGE~9,
RESERVED(Reser TPMR~10,
None Bit Field Type ved) RESERVED~16 None
Character String
Character String

UP(Up),

None Subnet Mask Type Valid Mask address N/A None

IPv4/IPv6 Dual
IPv4/IPv6 Dual
IP6_DAD_OK(Valid
), IP6_DAD_OK~1,
IP6_DAD_TENTATI IP6_DAD_TENTATI
VE(Tentative), VE~2,
IP6_DAD_DUPLIC IP6_DAD_DUPLIC
ATED(Duplicate), ATED~4,
IP6_DAD_UNKNO IP6_DAD_UNKNO
None Enumeration Type W(Unknown) W~8 None

MPGRP(Multi-link
PPP Group),
ETH(Ethernet Port),
ETHTRK(Ethernet MPGRP~2, ETH~3,
Trunk), ETHTRK~4,
Transport
Overbooking
Transport
Differentiated Flow DISABLE(Disable), DISABLE~0,
Control Enumeration Type ENABLE(Enable) ENABLE~1 None
Transport
Overbooking
Transport
Differentiated Flow
Control Interval Type 32~1000000 N/A Kbit/s
Transport
Overbooking
Transport
Differentiated Flow
Control Interval Type 32~1000000 N/A Kbit
Transport
Overbooking
Transport
Differentiated Flow
Control Interval Type 0~1000000 N/A Kbit
BASE_BOARD(Bas
e Board),
E1_COVERBOARD
k Board), ~3,
Transport
Overbooking
Transport
Differentiated Flow
ML-PPP/MC-PPP Interval Type 0~3 N/A None

ML-PPP/MC-PPP Enumeration Type ENABLE(Enable) ENABLE~1 None
NONAUTH(No
Authentication),
PAP(PAP
Authentication),
CHAP(CHAP NONAUTH~0,
ML-PPP/MC-PPP Enumeration Type Authentication) PAP~1, CHAP~2 None
Character String
ML-PPP/MC-PPP Type 1~67 characters N/A None
ML-PPP/MC-PPP Password Type 1~19 characters N/A None

ML-PPP/MC-PPP IP Address Type Valid IP address N/A None
ML-PPP/MC-PPP Subnet Mask Type Valid Mask address N/A None

ML-PPP/MC-PPP IP Address Type Valid IP address N/A None
LONG(Long), LONG~0,
ML-PPP/MC-PPP Enumeration Type SHORT(Short) SHORT~1 None
ML-PPP/MC-PPP Interval Type 128~1500 N/A byte

ML-PPP/MC-PPP Interval Type 1~1000 N/A ms
ML-PPP/MC-PPP Interval Type 4,8 N/A None

ML-PPP/MC-PPP
IP Header DISABLE(Disable), DISABLE~0,
Compression Enumeration Type ENABLE(Enable) ENABLE~1 None
ML-PPP/MC-PPP Interval Type 0~1000 N/A per mill
ML-PPP/MC-PPP Interval Type 0~1000 N/A per mill
ML-PPP/MC-PPP
UP(Up),
INITIAL(INITIAL),
STARTING(STARTI
NG),
CLOSED(CLOSED)
,
STOPPED(STOPP
ED),
CLOSING(CLOSIN
G),
STOPPING(STOPP INITIAL~1,
ING), STARTING~2,
REQSENT(REQSE CLOSED~3,
NT), STOPPED~4,
ACKRCVD(ACKRC CLOSING~5,
VD), STOPPING~6,
ACKSENT(ACKSE REQSENT~7,
NT), ACKRCVD~8,
OPENED(OPENED ACKSENT~9,
None Enumeration Type ) OPENED~10 None
INITIAL(INITIAL),
STARTING(STARTI
NG),
CLOSED(CLOSED)
,
STOPPED(STOPP
ED),
CLOSING(CLOSIN
G),
ING), STARTING~2,
NT), STOPPED~4,
VD), STOPPING~6,
NT), ACKRCVD~8,

BASE_BOARD(Bas
e Board), BASE_BOARD~0,
E1_COVERBOARD E1_COVERBOARD
None Enumeration Type (E1 Cover Board) ~3 None


TS1(Time Slot 1),

TS2(Time Slot 2),
TS3(Time Slot 3),
TS4(Time Slot 4),
TS5(Time Slot 5),
TS6(Time Slot 6),
TS7(Time Slot 7),
TS8(Time Slot 8), TS1~0, TS2~1,
TS10(Time Slot10), TS5~4, TS6~5,
TS13(Time Slot13), TS11~10, TS12~11,
TS14(Time Slot14), TS13~12,
ML-PPP/MC-PPP Bit Field Type TS31(Time Slot31) TS30~29, TS31~30 None
ML-PPP/MC-PPP Interval Type 1~65535 N/A ms
BASE_BOARD(Bas
e Board),
BACK_BOARD(Bac ~3,
BASE_BOARD(Bas
e Board), BASE_BOARD~0,
E1_COVERBOARD E1_COVERBOARD
ML-PPP/MC-PPP Enumeration Type (E1 Cover Board) ~3 None
UP(Up),
INITIAL(INITIAL),
STARTING(STARTI
NG),
CLOSED(CLOSED)
,
STOPPED(STOPP
ED),
CLOSING(CLOSIN
G),
ING), STARTING~2,
NT), STOPPED~4,
VD), STOPPING~6,
NT), ACKRCVD~8,
BASE_BOARD(Bas
e Board),
BACK_BOARD(Bac ~3,
ML-PPP/MC-PPP Enumeration Type k Board) BACK_BOARD~4 None

Centralized M2000
Management
OM Channel MASTER(Master), MASTER~0,
Backup Enumeration Type SLAVE(Slave) SLAVE~1 None
Centralized M2000
Management
OM Channel
Backup IP Address Type Valid IP address N/A None
Centralized M2000
Management
OM Channel
Centralized M2000
Management
OM Channel
Centralized M2000
Management
OM Channel
Centralized M2000
Management
OM Channel
Backup Enumeration Type IPV4(IPV4) IPV4~1 None
Centralized M2000
Management
OM Channel
Backup Enumeration Type NO(No), YES(Yes) NO~0, YES~1 None
NORMAL(Normal),
ABNORMAL(Abnor
mal), NORMAL~0,
UNKNOWN(Unkno ABNORMAL~1,
INUSE(In Use), INUSE~0,

None Enumeration Type UNUSED(Unused) UNUSED~1 None


NONE(NONE),
UDPSESSION(UD NONE~0,
None Enumeration Type PSESSION) UDPSESSION~1 None
IPv4/IPv6 Dual
Stack
Centralized M2000
Management IP Address Type Valid IP address N/A None
IPv4/IPv6 Dual
Stack
Centralized M2000
Management IP Address Type Valid IP address N/A None
NORMAL(Normal),
ABNORMAL(Abnor
mal), NORMAL~0,
UNKNOWN(Unkno ABNORMAL~1,
ETH(Ethernet Port),
ETHTRK(Ethernet
Trunk), ETH~3,
TUNNEL(Tunnel), ETHTRK~4,
SUBIF(Sub- TUNNEL~8,
PERMIT(Permit), PERMIT~0,
Integrated Firewall Enumeration Type DENY(Deny) DENY~1 None
BASE_BOARD(Bas
e Board),
BACK_BOARD(Bac
k Board), BASE_BOARD~0,



ADV_ACL(Only
Advanced ACL),
L2_ACL(Only Layer
2 ACL),
ADV_AND_L2(Adv ADV_ACL~0,
anced ACL and L2_ACL~1,
Integrated Firewall Enumeration Type Layer 2 ACL) ADV_AND_L2~2 None
Integrated Firewall IP Address Type Valid IP address N/A None
Integrated Firewall Subnet Mask Type Valid Mask address N/A None

PASSIVE(Passive
Mode),
IPv4/IPv6 Dual ACTIVE(Active PASSIVE~0,
Stack Enumeration Type Mode) ACTIVE~1 None
IPv4/IPv6 Dual
IPv4/IPv6 Dual
Stack Interval Type 500~5000 N/A ms
IPv4/IPv6 Dual
Stack Interval Type 5~60,65535 N/A min
IPv4/IPv6 Dual

BASE_BOARD(Bas
e Board),
E1_COVERBOARD
k Board), ~3,
ETH(Ethernet Port),
Integrated Firewall Enumeration Type E1T1(E1/T1 Port) ETH~0, E1T1~1 None

Compression &
Multiplexing over
E1/T1 Interval Type 0~15 N/A None

NONAUTH(No
Authentication),
PAP(PAP
Compression & Authentication),
Multiplexing over CHAP(CHAP NONAUTH~0,
E1/T1 Enumeration Type Authentication) PAP~1, CHAP~2 None
Compression &
Multiplexing over Character String
E1/T1 Type 1~67 characters N/A None
Compression &
Multiplexing over
E1/T1 Password Type 1~19 characters N/A None
TS1(Time Slot 1),
TS2(Time Slot 2),
TS3(Time Slot 3),
TS4(Time Slot 4),
TS5(Time Slot 5),
TS6(Time Slot 6),
TS7(Time Slot 7),
TS13(Time Slot13), TS11~10, TS12~11,
Compression & TS29(Time Slot29), TS28~27,
Multiplexing over TS30(Time Slot30), TS29~28,
E1/T1 Bit Field Type TS31(Time Slot31) TS30~29, TS31~30 None
Compression &
Multiplexing over
E1/T1 IP Address Type Valid IP address N/A None
Compression &
Multiplexing over
E1/T1 Subnet Mask Type Valid Mask address N/A None
Compression &
Multiplexing over
E1/T1 IP Address Type Valid IP address N/A None
Compression &
Multiplexing over
E1/T1 DISABLE(Disable), DISABLE~0,
PPP MUX Enumeration Type ENABLE(Enable) ENABLE~1 None
Compression &
Multiplexing over
E1/T1
PPP MUX Interval Type 1~512 N/A byte
Compression &
Multiplexing over
E1/T1
PPP MUX Interval Type 3~1500 N/A byte
Compression &
Multiplexing over
E1/T1
PPP MUX Interval Type 1~1000 N/A ms
Compression &
Multiplexing over
E1/T1
Compression &
Multiplexing over
E1/T1
Compression &
Multiplexing over
E1/T1 Interval Type 128~1500 N/A byte
Compression &
Multiplexing over DISABLE(Disable), DISABLE~0,
E1/T1 Enumeration Type ENABLE(Enable) ENABLE~1 None
Compression &
Multiplexing over DISABLE(Disable), DISABLE~0,
E1/T1 Enumeration Type ENABLE(Enable) ENABLE~1 None
Compression &
Multiplexing over
E1/T1 Interval Type 1~65535 N/A ms
UP(Up),
INITIAL(INITIAL),
STARTING(STARTI
NG),
CLOSED(CLOSED)
,
STOPPED(STOPP
ED),
CLOSING(CLOSIN
G),
ING), STARTING~2,
NT), STOPPED~4,
VD), STOPPING~6,
NT), ACKRCVD~8,
INITIAL(INITIAL),
STARTING(STARTI
NG),
CLOSED(CLOSED)
,
STOPPED(STOPP
ED),
CLOSING(CLOSIN
G),
ING), STARTING~2,
NT), STOPPED~4,
VD), STOPPING~6,
NT), ACKRCVD~8,
INITIAL(INITIAL),
STARTING(STARTI
NG),
CLOSED(CLOSED)
,
STOPPED(STOPP
ED),
CLOSING(CLOSIN
G),
ING), STARTING~2,
NT), STOPPED~4,
VD), STOPPING~6,
NT), ACKRCVD~8,

Compression &
Multiplexing over
E1/T1 Interval Type 1~1000 N/A per mill
Compression &
Multiplexing over
E1/T1 Interval Type 1~1000 N/A per mill
BASE_BOARD(Bas
e Board),
BACK_BOARD(Bac ~3,
DiffServ QoS
DiffServ QoS
DiffServ QoS
DiffServ QoS
DiffServ QoS
DiffServ QoS
DiffServ QoS
Enhanced
Transmission QoS
Management Enumeration Type ATM(ATM), IP(IP) ATM~0, IP~1 None
BASE_BOARD(Bas
e Board),
UNCHANNELLED_
COVERBOARD(Un
channelled Cover
k Board), ~3,
IMA(IMA Group),
UNI(UNI Link),
STM1(STM1),
FRAATM(FRAATM
Link), PPP(PPP
Link), IMA~0, UNI~1,
MPGRP(Multi-link STM1~2,
PPP Group), FRAATM~5,
Trunk), ETHTRK~10,
0~0, 1~1, 2~2, 3~3,
4~4, 5~5, 6~6, 7~7,
8~8, 9~9, 10~10,
0, 1, 2, 3, 4, 5, 6, 7, 11~11, 12~12,
8, 9, 10, 11, 12, 13, 13~13, 14~14,
Enhanced 14, 15, 15~15,
Transmission QoS DEFAULTPORT(De DEFAULTPORT~12
Management Enumeration Type fault Port) 7 None
Enhanced
Transmission QoS KBPS(Kbit/s), KBPS~0,
Management Enumeration Type CELL/S(cell/s) CELL/S~1 None
Enhanced
Transmission QoS
Management Interval Type 32~1000000 N/A None
Enhanced
Transmission QoS
Enhanced
Transmission QoS
Management Interval Type 64~1000000 N/A Kbit
Enhanced
Transmission QoS
Enhanced
Transmission QoS
Enhanced
Transmission QoS
Enhanced
Transmission QoS
Enhanced
Transmission QoS
Enhanced
Transmission QoS
Enhanced
Transmission QoS



SINGLE_RATE(Sin
gle Rate),
DUAL_RATE(Dual SINGLE_RATE~0,
None Enumeration Type Rate) DUAL_RATE~1 None


BASE_BOARD(Bas
e Board),
UNCHANNELLED_
COVERBOARD(Un
channelled Cover
k Board), ~3,
None Enumeration Type ATM(ATM), IP(IP) ATM~0, IP~1 None

IMA(IMA Group),
UNI(UNI Link),
STM1(STM1),
FRAATM(FRAATM
Link), PPP(PPP
Link), IMA~0, UNI~1,
MPGRP(Multi-link STM1~2,
PPP Group), FRAATM~5,
Trunk), ETHTRK~10,
0~0, 1~1, 2~2, 3~3,
Transport 4~4, 5~5, 6~6, 7~7,
Overbooking 8~8, 9~9, 10~10,
Transport 0, 1, 2, 3, 4, 5, 6, 7, 11~11, 12~12,
Differentiated Flow 8, 9, 10, 11, 12, 13, 13~13, 14~14,
Control 14, 15, 15~15,
Transport Resource DEFAULTPORT(De DEFAULTPORT~12
Overload Control Enumeration Type fault Port) 7 None
Transport
Differentiated Flow
Control Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Transport Dynamic
Flow Control Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Transport Dynamic
Flow Control Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Transport Dynamic
Flow Control Interval Type 0~1000 N/A per mill
Transport Dynamic
Flow Control Interval Type 0~10000 N/A ms
Transport Dynamic
Flow Control Interval Type 64~1000000 N/A Kbit/s
Transport Dynamic
Flow Control Interval Type 64~1000000 N/A Kbit/s
Transport
Overbooking
Transport
Transport
Overbooking
Transport
Transport
Overbooking
Transport
Differentiated Flow
Control Interval Type 0~6 N/A None
Transport
Overbooking
Transport
Differentiated Flow
Control Interval Type 0~500 N/A ms
Transport
Overbooking
Transport
Differentiated Flow
Control Interval Type 0~500 N/A ms
Transport
Overbooking
Transport
Differentiated Flow
Transport
Overbooking
Transport
Differentiated Flow
Transport
Differentiated Flow
Control Interval Type 0~8192 N/A packet

IPv4(IPv4),
None Enumeration Type IPv6(IPv6) IPv4~0, IPv6~1 None
Self-configuration IP Address Type Valid IP address N/A None

IPv4/IPv6 Dual
Stack
Self-configuration DISABLE(Disable), DISABLE~0,

Ipsec Enumeration Type ENABLE(Enable) ENABLE~1 None
Self-configuration
Ipsec Interval Type 0~65535 N/A None
IPv4/IPv6 Dual
Stack
Self-configuration
Character String
SCTP Multi-homing Interval Type 0~65535 N/A None
MANUAL_MODE(M
anual Mode),
SCTP Multi-homing IP Address Type Valid IP address N/A None


SCTP Multi-homing Interval Type 10~59999 N/A ms



ALDER32(ALDER3 ALDER32~0,
SCTP Multi-homing Enumeration Type 2), CRC32(CRC32) CRC32~1 None
SCTP Multi-homing Enumeration Type ENABLE(Enable) ENABLE~1 None
SCTP_STAT_DOW
N(Down),
SCTP_STAT_CON SCTP_STAT_DOW
GESTION(Congesti N~0,
on), SCTP_STAT_CON
SCTP_STAT_UP(U GESTION~1,
None Enumeration Type p) SCTP_STAT_UP~2 None
SCTP_TRANSFER
_CAUSE_START(S
tart),
SCTP_TRANSFER SCTP_TRANSFER
_CAUSE_LINKDO _CAUSE_START~0
WN(Link Down), ,
_CAUSE_PORTDI _CAUSE_LINKDO
SABLED(Port WN~1,
Disabled), SCTP_TRANSFER
SCTP_TRANSFER _CAUSE_PORTDI
_CAUSE_INIT(Initia SABLED~2,
l), SCTP_TRANSFER
SCTP_TRANSFER _CAUSE_INIT~3,
_CAUSE_UNKNO SCTP_TRANSFER
WERROR(Unknow _CAUSE_UNKNO
n Error), WERROR~4,
_CAUSE_NORMAL _CAUSE_NORMAL
(Normal), ~5,
_CAUSE_USERDE _CAUSE_USERDE
None Enumeration Type LETE(User Delete) LETE~6 None


ACTIVE(Active
Path),
STANDBY(Standby ACTIVE~0,
None Enumeration Type Path) STANDBY~1 None
UNBLOCK(Unblock UNBLOCK~0,
SCTP Multi-homing Enumeration Type ), BLOCK(Block) BLOCK~1 None
Character String
SCTP Multi-homing Type 0~47 characters N/A None
IPv4/IPv6 Dual
Stack
S1 and X2 over
IPv4/IPv6 Dual
Stack
S1 and X2 over
MANUAL_MODE(M
anual Mode),
IPv4/IPv6 Dual
Stack
S1 and X2 over
IPv4/IPv6 Dual
Stack
S1 and X2 over
IPv4/IPv6 Dual
Stack
S1 and X2 over
IPv4/IPv6 Dual
Stack
S1 and X2 over
IPv4/IPv6 Dual
Stack
S1 and X2 over
IPv4/IPv6 Dual
Stack
S1 and X2 over
IPv4/IPv6 Dual
Stack
S1 and X2 over
IPv6 Interval Type 1000~60000 N/A ms
IPv4/IPv6 Dual
Stack
S1 and X2 over
IPv4/IPv6 Dual
Stack
S1 and X2 over
IPv4/IPv6 Dual
Stack
S1 and X2 over
IPv4/IPv6 Dual
Stack
S1 and X2 over
IPv4/IPv6 Dual
Stack
S1 and X2 over
IPv4/IPv6 Dual
Stack
S1 and X2 over
IPv4/IPv6 Dual
Stack
S1 and X2 over
IPv4/IPv6 Dual
Stack
S1 and X2 over ALDER32(ALDER3 ALDER32~0,
IPv6 Enumeration Type 2), CRC32(CRC32) CRC32~1 None
IPv4/IPv6 Dual
Stack
S1 and X2 over DISABLE(Disable), DISABLE~0,
IPv6 Enumeration Type ENABLE(Enable) ENABLE~1 None
IPv4/IPv6 Dual
Stack
S1 and X2 over
SCTP_STAT_DOW
N(Down),
SCTP_STAT_CON SCTP_STAT_DOW
GESTION(Congesti N~0,
on), SCTP_STAT_CON
SCTP_STAT_UP(U GESTION~1,
None Enumeration Type p) SCTP_STAT_UP~2 None
SCTP_TRANSFER
_CAUSE_START(S
tart),
_CAUSE_LINKDO _CAUSE_START~0
WN(Link Down), ,
_CAUSE_PORTDI _CAUSE_LINKDO
SABLED(Port WN~1,
Disabled), SCTP_TRANSFER
SCTP_TRANSFER _CAUSE_PORTDI
_CAUSE_INIT(Initia SABLED~2,
l), SCTP_TRANSFER
SCTP_TRANSFER _CAUSE_INIT~3,
_CAUSE_UNKNO SCTP_TRANSFER
WERROR(Unknow _CAUSE_UNKNO
n Error), WERROR~4,
_CAUSE_NORMAL _CAUSE_NORMAL
(Normal), ~5,
_CAUSE_USERDE _CAUSE_USERDE
None Enumeration Type LETE(User Delete) LETE~6 None

ACTIVE(Active
Path),
STANDBY(Standby ACTIVE~0,
None Enumeration Type Path) STANDBY~1 None
IPv4/IPv6 Dual
Stack
S1 and X2 over UNBLOCK(Unblock UNBLOCK~0,
IPv6 Enumeration Type ), BLOCK(Block) BLOCK~1 None
IPv4/IPv6 Dual
Stack
S1 and X2 over Character String
IPv6 Type 0~47 characters N/A None
IPv4(IPv4),
Self-configuration Enumeration Type IPv6(IPv6) IPv4~0, IPv6~1 None
IPv4/IPv6 Dual
Stack
Self-configuration

IPv4/IPv6 Dual
Stack

Self-configuration
Character String
MANUAL_MODE(M
anual Mode),
Self-configuration Enumeration Type Mode) , AUTO_MODE~1 None
Self-configuration Enumeration Type Auto Created) 1 None
Character String

Self-configuration Interval Type 10~59999 N/A ms




ALDER32(ALDER3 ALDER32~0,
Self-configuration Enumeration Type 2), CRC32(CRC32) CRC32~1 None
Self-configuration
SEGW_CONFIG_O
N_HOST(SeGW
Config on Host), SEGW_CONFIG_O
SEGW_CONFIG_O N_HOST~0,
Self-configuration N_PEER(SeGW SEGW_CONFIG_O
Ipsec Enumeration Type Config on Peer) N_PEER~1 None
Self-configuration IPv4(IPv4),
Ipsec Enumeration Type IPv6(IPv6) IPv4~0, IPv6~1 None
Self-configuration
Ipsec IP Address Type Valid IP address N/A None
IPv4/IPv6 Dual
Stack
Self-configuration
Self-configuration Character String


Self-configuration

Self-configuration
Self-configuration IPv4(IPv4),
Ipsec Enumeration Type IPv6(IPv6) IPv4~0, IPv6~1 None
Self-configuration
Ipsec IP Address Type Valid IP address N/A None
IPv4/IPv6 Dual
Stack
Self-configuration

MANUAL_MODE(M
anual Mode),
Self-configuration AUTO_MODE(Auto MANUAL_MODE~0
Ipsec Enumeration Type Mode) , AUTO_MODE~1 None

Self-configuration AUTO_CREATED( AUTO_CREATED~
Ipsec Enumeration Type Auto Created) 1 None
Self-configuration

Self-configuration

Self-configuration IKE_V1(IKE V1), IKE_V1~1,
Ipsec Enumeration Type IKE_V2(IKE V2) IKE_V2~2 None
MAIN(Main Mode),
Self-configuration AGGRESSIVE(Agg MAIN~2,
Ipsec Enumeration Type ressive Mode) AGGRESSIVE~4 None
Self-configuration
Ipsec Password Type 0~127 characters N/A None
DISABLE(Disable),
Self-configuration PERIODIC(Periodic DISABLE~0,
Ipsec Enumeration Type ) PERIODIC~2 None
Self-configuration
Ipsec Interval Type 10~3600 N/A s
Self-configuration
Self-configuration
DISABLE(Disable),
PFS_GROUP1(768
-bit Diffie-Hellman
Group),
Self-configuration 4-bit Diffie-Hellman PFS_GROUP1~1,
Ipsec Enumeration Type Group) PFS_GROUP2~2 None
GLOBAL(Global
Configuration),
Self-configuration LOCAL(Local GLOBAL~0,
Ipsec Enumeration Type Configuration) LOCAL~1 None
Self-configuration
Self-configuration 0,1843200~429496
Ipsec Interval Type 7295 N/A KB
WND_DISABLE(0), WND_DISABLE~0,
WND_32(32), WND_32~1,
WND_64(64), WND_64~2,
WND_128(128), WND_128~128,
WND_256(256), WND_256~256,
WND_512(512), WND_512~512,
WND_1024(1024), WND_1024~1024,
Self-configuration WND_2048(2048), WND_2048~2048,
Ipsec Enumeration Type WND_4096(4096) WND_4096~4096 None
BASE_BOARD(Bas

ETH(Ethernet Port),
ETHTRK(Ethernet
None Enumeration Type Trunk) ETH~3, ETHTRK~4 None
VLAN Support
(IEEE 802.1p/q) IP Address Type Valid IP address N/A None
VLAN Support
(IEEE 802.1p/q) Subnet Mask Type Valid Mask address N/A None
VLAN Support
Transport
Overbooking Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Transport
Transport
Overbooking Interval Type 0~100 N/A %
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Intra-LTE Load
Balancing Interval Type 0~100 N/A %
Intra-LTE Load
Intra-LTE Load
Intra-LTE Load
Intra-LTE Load
Intra-LTE Load
Intra-LTE Load
Intra-LTE Load
Transport Resource
Overload Control Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Transport Resource
Overload Control Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Transport Resource
Overload Control Interval Type 0~100 N/A %
Transport Resource
Transport Resource
Overload Control Interval Type 0~100 N/A None
Transport Resource
Transport Resource
IP-Based Multi-
mode Co-
Transmission on BS
side(eNodeB)
2G/3G and LTE Co-
IP-Based Multi-
mode Co-
Transmission on BS
side(eNodeB)
2G/3G and LTE Co-
IP-Based Multi-
mode Co-
Transmission on BS
side(eNodeB)
2G/3G and LTE Co-
IP-Based Multi-
mode Co-
Transmission on BS
side(eNodeB)
2G/3G and LTE Co-
IP-Based Multi-
mode Co-
Transmission on BS
side(eNodeB)
2G/3G and LTE Co-
IP-Based Multi-
mode Co-
Transmission on BS
side(eNodeB)
2G/3G and LTE Co-
IP-Based Multi-
mode Co-
Transmission on BS
side(eNodeB)
2G/3G and LTE Co-
IP-Based Multi-
mode Co-
Transmission on BS
side(eNodeB)
2G/3G and LTE Co-
transmission Enumeration Type UL(UL), DL(DL) UL~0, DL~1 None


Character String
NORMAL(Normal),
ABNORMAL(Abnor NORMAL~0,
None Enumeration Type mal) ABNORMAL~1 None

IPPRECEDENCE(I
P Precedence), IPPRECEDENCE~
None Enumeration Type DSCP(DSCP) 0, DSCP~1 None
None Interval Type 0~100 N/A %
HQ(High Quality),
None Enumeration Type LQ(Low Quality) HQ~0, LQ~1 None
IPv4(IPv4),
IPv4/IPv6 Dual
Stack

Self-configuration
Character String
IPv4(IPv4),

IPv4/IPv6 Dual
Stack

Self-configuration
Character String
MANUAL_MODE(M
anual Mode),
Self-configuration Enumeration Type Mode) , AUTO_MODE~1 None
Self-configuration Enumeration Type Auto Created) 1 None
Character String
VLAN Support
USERDATA(User
Data),
SIG(Signaling
Data),
OTHER(Other
Data),
OM_HIGH(High
Level Maintenance
Data), USERDATA~0,
OM_LOW(Low SIG~1, OTHER~3,
VLAN Support Level Maintenance OM_HIGH~4,
(IEEE 802.1p/q) Enumeration Type Data) OM_LOW~5 None
VLAN Support
VLAN Support
VLAN Support

VLAN Support
(IEEE 802.1p/q) Subnet Mask Type Valid Mask address N/A None
SINGLEVLAN(Singl
e VLAN),
VLAN Support VLANGROUP(VLA SINGLEVLAN~0,
(IEEE 802.1p/q) Enumeration Type N Group) VLANGROUP~1 None
VLAN Support
VLAN Support
VLAN Support
VLAN Support DISABLE(Disable), DISABLE~0,
(IEEE 802.1p/q) Enumeration Type ENABLE(Enable) ENABLE~1 None
Character String
Remote Electrical
Tilt Control Interval Type 0~125 N/A None
Character String
Character String
Remote Electrical Character String
Tilt Control Type 0~49 characters N/A None
Remote Electrical
Remote Electrical
Tilt Control Interval Type 4~5,60~254 N/A None
Remote Electrical
AISG1.1(AISG1.1), AISG1.1~1,
3GPP(3GPP), 3GPP~3,


Character String
Character String
Character String
SINGLE_RET(SIN
GLE_RET),
STMA(STMA), SINGLE_RET~1,
MULTI_RET(MULTI STMA~2,
None Enumeration Type _RET) MULTI_RET~17 None
R0A(R0A),
R0B(R0B),
RET_PORT(RET_P
ORT), R0C(R0C),
R0D(R0D), R0A~0, R0B~1,
R0E(R0E), RET_PORT~2,
R0F(R0F), R0C~3, R0D~4,
R0G(R0G), R0E~5, R0F~6,
R0H(R0H), R0G~7, R0H~8,
None Interval Type 4~5,60~254 N/A None

R0A(R0A),
R0B(R0B),
R0C(R0C),
R0D(R0D),
R0E(R0E), R0A~0, R0B~1,
R0F(R0F), R0C~2, R0D~3,
Remote Electrical R0G(R0G), R0E~4, R0F~5,
Tilt Control Enumeration Type R0H(R0H) R0G~6, R0H~7 None
0~1000(metric
Remote Electrical system);0~3281(im
Tilt Control Interval Type perial system) N/A m(ft)
Remote Electrical
Tilt Control Interval Type 0~4000 N/A ns
Remote Electrical
Tilt Control Interval Type 0~4000 N/A ns
Remote Electrical
Tilt Control Enumeration Type ON(ON), OFF(OFF) ON~0, OFF~1 None
UER_SELF_DEFIN
E(USER_DEFINED
),
TMA12DB_ONLY_
NON_AISG(TMA12
DB_ONLY_NON_AI
SG),
TMA24DB_ONLY_ UER_SELF_DEFIN
NON_AISG(TMA24 E~0,
DB_ONLY_NON_AI TMA12DB_ONLY_
SG), NON_AISG~1,
RET_ONLY_COAXI TMA24DB_ONLY_
AL(RET_ONLY_CO NON_AISG~2,
AXIAL), RET_ONLY_COAXI
TMA12DB_AISG(T AL~3,
MA12DB_AISG), TMA12DB_AISG~5
TMA24DB_AISG(T ,
None Enumeration Type MA24DB_AISG) TMA24DB_AISG~6 None
Remote Electrical
Tilt Control Interval Type 0~3500 N/A mA
Remote Electrical
Remote Electrical
Remote Electrical
None Interval Type 0~3500 N/A mA
ON(ON),
OFF(OFF), ON~0, OFF~1,
SINGLE_RET(SIN
GLE_RET),
Remote Electrical MULTI_RET(MULTI SINGLE_RET~1,
Tilt Control Enumeration Type _RET) MULTI_RET~17 None
Remote Electrical SINGLE(SINGLE), SINGLE~1,

Tilt Control Enumeration Type DUAL(DUAL) DUAL~2 None
REGULAR(REGUL
AR),
DAISY_CHAIN(DAI
SY_CHAIN),
SECTOR_SPLITTI REGULAR~1,
NG(SECTOR_SPLI DAISY_CHAIN~2,
TTING), SECTOR_SPLITTI
Remote Electrical 2G_EXTENSION(2 NG~3,
Tilt Control Enumeration Type G_EXTENSION) 2G_EXTENSION~4 None
Remote Electrical
Remote Electrical
Character String
Character String
Remote Electrical
Remote Electrical
Remote Electrical
3GPP(3GPP), 3GPP~3,

Character String
Character String
Character String
SINGLE_RET(SIN
GLE_RET),
R0A(R0A),
R0B(R0B),
RET_PORT(RET_P
ORT), R0C(R0C),
R0D(R0D), R0A~0, R0B~1,
R0F(R0F), R0C~3, R0D~4,
R0G(R0G), R0E~5, R0F~6,
R0H(R0H), R0G~7, R0H~8,
Remote Electrical
Remote Electrical
Remote Electrical
Tilt Control Interval Type 0~359 N/A degree


Remote Electrical
Remote Electrical
Remote Electrical
Remote Electrical
Remote Electrical
Tilt Control Interval Type 0~255 N/A 0.1dBi
Remote Electrical
Remote Electrical
Remote Electrical

Remote Electrical
Tilt Control Interval Type -100~300 N/A 0.1degree

UNUSED(UNUSED
), BandI(BandI), UNUSED~0,
BandII(BandII), BandI~1, BandII~2,
BandIII(BandIII), BandIII~3,
BandIV(BandIV), BandIV~4,
BandV(BandV), BandV~5,
BandVI(BandVI), BandVI~6,
BandVII(BandVII), BandVII~7,
BandVIII(BandVIII), BandVIII~8,
Remote Electrical BandIX(BandIX), BandIX~9,
Tilt Control Enumeration Type BandX(BandX) BandX~10 None
UNUSED(UNUSED
UNUSED(UNUSED
UNUSED(UNUSED


None Interval Type -32768~32767 N/A 0.1degree

UNUSED(UNUSED
BandIX(BandIX), BandIX~9,
BandX(BandX), BandX~10,
UNUSED(UNUSED
UNUSED(UNUSED
UNUSED(UNUSED
None Interval Type 0~359 N/A degree
None Interval Type 0~255 N/A 0.1dBi
None Interval Type 0 N/A None

Remote Electrical RET_PORT(RET_P

Tilt Control Enumeration Type ORT) RET_PORT~2 None
Remote Electrical
UER_SELF_DEFIN
E(USER_DEFINED
), UER_SELF_DEFIN
RET_ONLY_MULTI E~0,
CORE(RET_ONLY RET_ONLY_MULTI
None Enumeration Type _MULTICORE) CORE~4 None
Remote Electrical
Remote Electrical
Remote Electrical
Remote Electrical
Remote Electrical
ON(ON),
Remote Electrical
Remote Electrical
AVAILABLE(AVAILA
BLE),
UNAVAILABLE(UN
AVAILABLE),
BREAKLINK(BREA AVAILABLE~0,
KLINK), UNAVAILABLE~1,
RESERVED(RESE BREAKLINK~2,
None Enumeration Type RVED) RESERVED~3 None
Remote Electrical
Tilt Control Interval Type 0~62,255 N/A None
Remote Electrical
Remote Electrical
R0A(R0A),
R0B(R0B),
R0C(R0C),
R0D(R0D),
R0E(R0E), R0A~0, R0B~1,
R0F(R0F), R0C~2, R0D~3,
Remote Electrical
Remote Electrical
Remote Electrical
R0A(R0A),
R0B(R0B),
R0C(R0C),
R0D(R0D),
R0E(R0E), R0A~0, R0B~1,
R0F(R0F), R0C~2, R0D~3,
Remote Electrical
Tilt Control Interval Type -100~300,32767 N/A 0.1degree
Remote Electrical
Tilt Control Interval Type 0~10 N/A 0.1degree
Remote Electrical
Character String
Character String
Remote Electrical
Remote Electrical
Remote Electrical
3GPP(3GPP), 3GPP~3,

Character String
Character String
Character String
SINGLE_RET(SIN
GLE_RET),
R0A(R0A),
R0B(R0B),
RET_PORT(RET_P
ORT), R0C(R0C),
R0D(R0D), R0A~0, R0B~1,
R0F(R0F), R0C~3, R0D~4,
R0G(R0G), R0E~5, R0F~6,
R0H(R0H), R0G~7, R0H~8,

Character String

Character String
Character String
UNUSED(UNUSED
None Enumeration Type BandX(BandX) BandX~10 None
UNUSED(UNUSED
UNUSED(UNUSED
UNUSED(UNUSED
Character String
Character String
Character String
None Interval Type 0~4294967295 N/A 0.25dB

UNSUPPORT(UNS
UPPORT),
SUPPORT_BYPAS
S(SUPPORT_BYP
ASS), UNSUPPORT~0,
SUPPORT_VSWR( SUPPORT_BYPAS
SUPPORT_VSWR) S~1,
, SUPPORT_VSWR~
VSWR/BYPASS(VS 2,
WR/BYPASS), VSWR/BYPASS~3,
UNUSED(UNUSED
UNUSED(UNUSED
UNUSED(UNUSED
UNUSED(UNUSED


NORMAL(NORMAL
), NORMAL~0,
BYPASS(BYPASS), BYPASS~1,
AVAILABLE(AVAILA
BLE),
UNAVAILABLE(UN
AVAILABLE),
BREAKLINK(BREA AVAILABLE~0,
KLINK), UNAVAILABLE~1,
RESERVED(RESE BREAKLINK~2,
None Enumeration Type RVED) RESERVED~3 None
R0A(R0A),
R0B(R0B),
R0C(R0C),
R0D(R0D),
R0E(R0E), R0A~0, R0B~1,
R0F(R0F), R0C~2, R0D~3,
R0G(R0G), R0E~4, R0F~5,
None Enumeration Type R0H(R0H) R0G~6, R0H~7 None

NORMAL(NORMAL
),
BYPASS(BYPASS), NORMAL~0,
DEVICE_DEFAULT BYPASS~1,
_VALUE(DEVICE_ DEVICE_DEFAULT
None Enumeration Type DEFAULT_VALUE) _VALUE~255 None

R0A(R0A),
R0B(R0B),
R0C(R0C),
R0D(R0D),
R1A(R1A),
R1B(R1B),
R1C(R1C),
R1D(R1D),
R2A(R2A),
R2B(R2B),
R2C(R2C),
R2D(R2D),
R3A(R3A),
R3B(R3B),
R3C(R3C), R0A~0, R0B~1,
R3D(R3D), R0C~2, R0D~3,
R4A(R4A), R1A~16, R1B~17,
R4B(R4B), R1C~18, R1D~19,
R4C(R4C), R2A~32, R2B~33,
R4D(R4D), R2C~34, R2D~35,
R5A(R5A), R3A~48, R3B~49,
R5B(R5B), R3C~50, R3D~51,
R5C(R5C), R4A~64, R4B~65,
R5D(R5D), R4C~66, R4D~67,
R6A(R6A), R5A~80, R5B~81,
R6B(R6B), R5C~82, R5D~83,
R6C(R6C), R6A~96, R6B~97,
R6D(R6D), R6C~98, R6D~99,
R7A(R7A), R7A~112,
R7B(R7B), R7B~113,
R7C(R7C), R7C~114,
R7D(R7D), R7D~115,

Character String
R0A(R0A),
R0B(R0B),
R0C(R0C),
R0D(R0D),
R1A(R1A),
R1B(R1B),
R1C(R1C),
R1D(R1D),
R2A(R2A),
R2B(R2B),
R2C(R2C),
R2D(R2D),
R3A(R3A),
R3B(R3B),
R3C(R3C), R0A~0, R0B~1,
R3D(R3D), R0C~2, R0D~3,
R4A(R4A), R1A~16, R1B~17,
R4B(R4B), R1C~18, R1D~19,
R4C(R4C), R2A~32, R2B~33,
R4D(R4D), R2C~34, R2D~35,
R5A(R5A), R3A~48, R3B~49,
R5B(R5B), R3C~50, R3D~51,
R5C(R5C), R4A~64, R4B~65,
R5D(R5D), R4C~66, R4D~67,
R6A(R6A), R5A~80, R5B~81,
R6B(R6B), R5C~82, R5D~83,
R6C(R6C), R6A~96, R6B~97,
R6D(R6D), R6C~98, R6D~99,
R7A(R7A), R7A~112,
R7B(R7B), R7B~113,
R7C(R7C), R7C~114,
R7D(R7D), R7D~115,
R0A(R0A),
R0B(R0B),
R0C(R0C),
R0D(R0D),
R1A(R1A),
R1B(R1B),
R1C(R1C),
R1D(R1D),
R2A(R2A),
R2B(R2B),
R2C(R2C),
R2D(R2D),
R3A(R3A),
R3B(R3B),
R3C(R3C), R0A~0, R0B~1,
R3D(R3D), R0C~2, R0D~3,
R4A(R4A), R1A~16, R1B~17,
R4B(R4B), R1C~18, R1D~19,
R4C(R4C), R2A~32, R2B~33,
R4D(R4D), R2C~34, R2D~35,
R5A(R5A), R3A~48, R3B~49,
R5B(R5B), R3C~50, R3D~51,
R5C(R5C), R4A~64, R4B~65,
R5D(R5D), R4C~66, R4D~67,
R6A(R6A), R5A~80, R5B~81,
R6B(R6B), R5C~82, R5D~83,
R6C(R6C), R6A~96, R6B~97,
R6D(R6D), R6C~98, R6D~99,
R7A(R7A), R7A~112,
R7B(R7B), R7B~113,
R7C(R7C), R7C~114,
R7D(R7D), R7D~115,
Character String

NEGATIVE_45(NE
GATIVE_45),
POSITIVE_45(POS
ITIVE_45),
HORIZONTAL(HOR
IZONTAL), NEGATIVE_45~0,
VERTICAL(VERTIC POSITIVE_45~1,
AL), LEFT(LEFT), HORIZONTAL~2,
RIGHT(RIGHT), VERTICAL~3,
POSITIVE_NEGATI LEFT~4, RIGHT~5,
VE_45(POSITIVE_ POSITIVE_NEGATI
None Enumeration Type NEGATIVE_45) VE_45~6 None

R0A(R0A),
R0B(R0B),
R0C(R0C),
R0D(R0D),
R1A(R1A),
R1B(R1B),
R1C(R1C),
R1D(R1D),
R2A(R2A),
R2B(R2B),
R2C(R2C),
R2D(R2D),
R3A(R3A),
R3B(R3B),
R3C(R3C), R0A~0, R0B~1,
R3D(R3D), R0C~2, R0D~3,
R4A(R4A), R1A~16, R1B~17,
R4B(R4B), R1C~18, R1D~19,
R4C(R4C), R2A~32, R2B~33,
R4D(R4D), R2C~34, R2D~35,
R5A(R5A), R3A~48, R3B~49,
R5B(R5B), R3C~50, R3D~51,
R5C(R5C), R4A~64, R4B~65,
R5D(R5D), R4C~66, R4D~67,
R6A(R6A), R5A~80, R5B~81,
R6B(R6B), R5C~82, R5D~83,
R6C(R6C), R6A~96, R6B~97,
R6D(R6D), R6C~98, R6D~99,
R7A(R7A), R7A~112,
R7B(R7B), R7B~113,
R7C(R7C), R7C~114,
R7D(R7D), R7D~115,
NEGATIVE_45(NE
GATIVE_45),
POSITIVE_45(POS
ITIVE_45),
HORIZONTAL(HOR
None Interval Type -150~150,32767 N/A 0.1degree

R0A(R0A),
R0B(R0B),
R0C(R0C),
R0D(R0D),
R1A(R1A),
R1B(R1B),
R1C(R1C),
R1D(R1D),
R2A(R2A),
R2B(R2B),
R2C(R2C),
R2D(R2D),
R3A(R3A),
R3B(R3B),
R3C(R3C), R0A~0, R0B~1,
R3D(R3D), R0C~2, R0D~3,
R4A(R4A), R1A~16, R1B~17,
R4B(R4B), R1C~18, R1D~19,
R4C(R4C), R2A~32, R2B~33,
R4D(R4D), R2C~34, R2D~35,
R5A(R5A), R3A~48, R3B~49,
R5B(R5B), R3C~50, R3D~51,
R5C(R5C), R4A~64, R4B~65,
R5D(R5D), R4C~66, R4D~67,
R6A(R6A), R5A~80, R5B~81,
R6B(R6B), R5C~82, R5D~83,
R6C(R6C), R6A~96, R6B~97,
R6D(R6D), R6C~98, R6D~99,
R7A(R7A), R7A~112,
R7B(R7B), R7B~113,
R7C(R7C), R7C~114,
R7D(R7D), R7D~115,
NEGATIVE_45(NE
GATIVE_45),
POSITIVE_45(POS
ITIVE_45),
HORIZONTAL(HOR
NEGATIVE_45(NE
GATIVE_45),
POSITIVE_45(POS
ITIVE_45),
HORIZONTAL(HOR
None Interval Type 0,1,2,4 N/A None
None Interval Type -300,0,300,32767 N/A 0.1degree
None Interval Type 330,650,65535 N/A 0.1degree

Synchronization
with BITS Interval Type 0 N/A None
DEACTIVATED(De
activated),
ACTIVATED(Activat DEACTIVATED~0,
None Enumeration Type ed) ACTIVATED~1 None
UNAVAILABLE(Una
vailable),
AVAILABLE(Availab UNAVAILABLE~0,
None Enumeration Type le) AVAILABLE~1 None
Synchronization
with BITS Interval Type 1~4 N/A None

Synchronization E1T1(E1T1),
with E1/T1 Enumeration Type STM1(STM1) E1T1~0, STM1~1 None
Synchronization
with E1/T1 Interval Type 0~7 N/A None
DEACTIVATED(De
activated),
UNAVAILABLE(Una
vailable),
Synchronization
with E1/T1 Interval Type 1~4 N/A None
Multi-mode BS
Common Reference
Clock(eNodeB) Interval Type 0 N/A None
UMTS(UMTS),
GSM(GSM),
LTE(LTE),
Multi-mode BS COMM(COMM), UMTS~0, GSM~1,
Common Reference DEFAULT(DEFAUL LTE~4, COMM~8,
Clock(eNodeB) Enumeration Type T) DEFAULT~255 None
DEACTIVATED(De
activated),
UNAVAILABLE(Una
vailable),
IN(Input),
None Enumeration Type OUT(Output) IN~0, OUT~1 None

TWISTED-
PAIR(Twisted-Pair), TWISTED-PAIR~0,
None Enumeration Type COAXIAL(Coaxial) COAXIAL~1 None
0~1000(metric
system);0~3281(im
None Interval Type perial system) N/A m(ft)
DEACTIVATED(De
activated),
UNAVAILABLE(Una
vailable),
None Interval Type 0~100000 N/A ns
Synchronization
with GPS Interval Type 0~17 N/A None

USER_CONFIG(Us
er Config),
SEARCH_WITH_D
URATION(Search
with duration), USER_CONFIG~0,
SEARCH_WITH_P SEARCH_WITH_D
RECISION(Search URATION~1,
with precision), SEARCH_WITH_P
Synchronization AUTO_SEARCH(A RECISION~2,
with GPS Enumeration Type uto Search) AUTO_SEARCH~3 None
-
Synchronization 180000000~18000
with GPS Interval Type 0000 N/A 1e-6 degree
-
Synchronization 90000000~900000
with GPS Interval Type 00 N/A 1e-6 degree
-
1000~10000(metric
system);-
Synchronization 3281~32808(imperi
with GPS Interval Type al system) N/A m(ft)
Synchronization
with GPS Interval Type 0~89 N/A degree
None Interval Type 0~100000 N/A ns
Synchronization
with GPS Interval Type 1~2880 N/A min
1~100(metric
Synchronization system);3~328(imp
with GPS Interval Type erial system) N/A m(ft)
TWISTED-
Synchronization PAIR(Twisted-Pair), TWISTED-PAIR~0,
with GPS Enumeration Type COAXIAL(Coaxial) COAXIAL~1 None
0~1000(metric
Synchronization system);0~3281(im
with GPS Interval Type perial system) N/A m(ft)
Character String
Lock(Yes),
None Enumeration Type Unlock(No) Lock~0, Unlock~1 None
Valid(Valid),
None Enumeration Type Invalid(Invalid) Valid~0, Invalid~1 None
Valid(Valid),
NotFixed(Not NotFixed~0,
None Enumeration Type Fixed), Fixed(Fixed) Fixed~1 None
Enabled(Enabled), Enabled~0,
None Enumeration Type Disabled(Disabled) Disabled~1 None
Valid(Valid),
NOTEXIST(Inexiste
nt),
ANTENNASHORTE
D(Antenna
Shorted),
ANTENNAOPENE
D(Antenna
Opened),
SELF_CHECK_FAI
LURE(Self-check
Failure), NOTEXIST~0,
COMEXCEPTION( ANTENNASHORTE
Star Card D~1,
Communication ANTENNAOPENE
Fault), D~2,
NORMAL(Normal), SELF_CHECK_FAI
UNKNOWN(Unkno LURE~3,
wn Exception), COMEXCEPTION~
USCUINVALID(US 4, NORMAL~5,
CU Invalid), UNKNOWN~6,
UNKNOWN_STAR USCUINVALID~7,
_CARD(Unknown UNKNOWN_STAR
None Enumeration Type Star Card) _CARD~8 None
M12M(M12M),
UT(UT), RT(RT),
JPS15L(JPS15L),
K161(K161),
GG16(GG16), M12M~0, UT~1,
JNS100(JNS100), RT~2, JPS15L~3,
RGPS(RGPS), K161~4, GG16~5,
CWAIN(CWAIN), JNS100~6,
RTSMT(RTSMT), RGPS~7,
UBLOX5(UBLOX5), CWAIN~8,
BD7702(BD7702), RTSMT~9,
NAVIOR(NAVIOR), UBLOX5~10,
PPSTOD(PPSTOD) BD7702~11,
, M1000(M1000), NAVIOR~12,
TRGPS(TRGPS), PPSTOD~13,
BD7702CMS(BD77 M1000~14,
02CMS), TRGPS~15,
OEM4(OEM4), BD7702CMS~16,
N24MS(N24MS), OEM4~17,
UNKNOWN(Unkno N24MS~18,

GPS(GPS),
GLONASS(GLONA
SS),
GPS/GLONASS(G
PS/GLONASS with
GPS Prioritized),
COMPASS(COMPA
SS),
COMPASS/GPS(C
OMPASS/GPS with GPS~0,
COMPASS GLONASS~1,
Prioritized), GPS/GLONASS~2,
GPS/COMPASS(G COMPASS~3,
Synchronization PS/COMPASS with COMPASS/GPS~4,
with GPS Enumeration Type GPS Prioritized) GPS/COMPASS~5 None
DEACTIVATED(De
activated),
HOLDED(HOLDED
),
UNHOLDED(UNHO HOLDED~0,
None Enumeration Type LDED) UNHOLDED~1 None
Synchronization
with Ethernet (ITU-
T G.8261)
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei
proprietary)
IEEE 1588v2 over
Synchronization
with Ethernet (ITU-
T G.8261)
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei HW_DEFINED(Hua
proprietary) Wei Defined
IEEE 1588v2 over Protocol), PTP(PTP HW_DEFINED~0,
IPv6 Enumeration Type Protocol) PTP~1 None

Synchronization
with Ethernet (ITU-
T G.8261)
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei
proprietary)
IEEE 1588v2 over
Synchronization
with Ethernet (ITU-
T G.8261)
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei
proprietary)
IEEE 1588v2 over
Synchronization
with Ethernet (ITU-
T G.8261)
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei
proprietary)
IEEE 1588v2 over
Synchronization
with Ethernet (ITU-
T G.8261)
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei
proprietary)
IEEE 1588v2 over E2E(E2E),
IPv6 Enumeration Type P2P(P2P) E2E~0, P2P~1 None
Synchronization
with Ethernet (ITU-
T G.8261)
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei
proprietary)
IEEE 1588v2 over
IPv6 Enumeration Type OFF(OFF), ON(ON) OFF~0, ON~1 None
Synchronization
with Ethernet (ITU-
T G.8261)
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei
proprietary)
IEEE 1588v2 over
Synchronization
with Ethernet (ITU-
T G.8261)
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei
proprietary)
IEEE 1588v2 over
Synchronization
with Ethernet (ITU-
T G.8261)
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei
proprietary)
IEEE 1588v2 over
Synchronization
with Ethernet (ITU-
T G.8261)
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei
proprietary)
IEEE 1588v2 over

Synchronization
with Ethernet (ITU-
T G.8261)
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei
proprietary)
IEEE 1588v2 over
IPv6 Enumeration Type NO(NO), YES(YES) NO~0, YES~1 None
Synchronization
with Ethernet (ITU-
T G.8261)
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei
proprietary)
IEEE 1588v2 over
IPv6 Compound Type 14 characters N/A None
DEACTIVATED(De
activated),
UNAVAILABLE(Una
vailable),
Synchronization
with Ethernet (ITU-
T G.8261)
IEEE1588 V2 Clock
Synchronization
Clock over IP UNICAST(Unicast),
(Huawei L3_MULTICAST(L3
proprietary) Multicast), UNICAST~0,
IEEE 1588v2 over L2_MULTICAST(L2 L3_MULTICAST~1,
IPv6 Enumeration Type Multicast) L2_MULTICAST~2 None
Synchronization
with Ethernet (ITU-
T G.8261)
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei
proprietary)
IEEE 1588v2 over
IPv6 Interval Type -100000~100000 N/A ns

ONE_STEP(One
Step),
TWO_STEP(Two ONE_STEP~0,
None Enumeration Type Step) TWO_STEP~1 None
Synchronization
with Ethernet (ITU-
T G.8261)
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei
proprietary)
IEEE 1588v2 over
Synchronization
with Ethernet (ITU-
T G.8261)
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei 1/16(1/16), 1/8(1/8), 1/16~0, 1/8~1,
proprietary) 1/4(1/4), 1/2(1/2), 1/4~2, 1/2~3,
IEEE 1588v2 over 1.0(1.0), 2.0(2.0), 1.0~4, 2.0~5,
IPv6 Enumeration Type 4.0(4.0), 8.0(8.0) 4.0~6, 8.0~7 Hz
Synchronization
with Ethernet (ITU-
T G.8261)
IEEE1588 V2 Clock
Synchronization 1/2(1/2), 1.0(1.0),
Clock over IP 2.0(2.0), 4.0(4.0), 1/2~0, 1.0~1,
(Huawei 8.0(8.0), 16.0(16.0), 2.0~2, 4.0~3,
proprietary) 32.0(32.0), 8.0~4, 16.0~5,
IEEE 1588v2 over 64.0(64.0), 32.0~6, 64.0~7,
IPv6 Enumeration Type 128.0(128.0) 128.0~8 Hz
Synchronization
with Ethernet (ITU-
T G.8261)
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei
proprietary)
IEEE 1588v2 over
Synchronization
with Ethernet (ITU-
T G.8261)
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei
proprietary)
IEEE 1588v2 over 1588V2(1588V2), 1588V2~0,
IPv6 Enumeration Type G.8265.1(G.8265.1) G.8265.1~1 None
Synchronization
with Ethernet (ITU-
T G.8261)
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei
proprietary)
IEEE 1588v2 over
IPv6 Interval Type 60~1000 N/A s
Synchronization
with Ethernet (ITU-
T G.8261)
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei
proprietary)
IEEE 1588v2 over IPV4(IPv4),
IPv6 Enumeration Type IPV6(IPv6) IPV4~0, IPV6~1 None
Synchronization
with Ethernet (ITU-
T G.8261)
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei
proprietary)
IEEE 1588v2 over
Synchronization
with Ethernet (ITU-
T G.8261)
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei
proprietary)
IEEE 1588v2 over
Synchronization
with Ethernet (ITU-
T G.8261)
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei
proprietary)
IEEE 1588v2 over
Synchronization
with Ethernet (ITU-
T G.8261)
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei
proprietary) 1/2(1/2), 1.0(1.0), 1/2~3, 1.0~4,
IEEE 1588v2 over 2.0(2.0), 4.0(4.0), 2.0~5, 4.0~6,
IPv6 Enumeration Type 8.0(8.0), 16.0(16.0) 8.0~7, 16.0~8 None
Enhanced
Synchronization
Synchronization
with Ethernet (ITU-
T G.8261) Interval Type 0~1 N/A None
Enhanced
Synchronization
Synchronization
with Ethernet (ITU-
Enhanced
Synchronization
Synchronization DISABLE(DISABLE
with Ethernet (ITU- ), DISABLE~0,
T G.8261) Enumeration Type ENABLE(ENABLE) ENABLE~1 None
DEACTIVATED(De
activated),
UNAVAILABLE(Una
vailable),
Enhanced
Synchronization
Synchronization
with Ethernet (ITU-
Enhanced
Synchronization
Synchronization
with Ethernet (ITU- IN(Input),
T G.8261) Enumeration Type OUT(Output) IN~0, OUT~1 None
Synchronization
Clock Source
Switching Manually
or Automatically
Synchronization
with GPS
Synchronization
with BITS
Synchronization
with 1PPS
Synchronization
with E1/T1
Enhanced
Synchronization
Synchronization
with Ethernet (ITU-
T G.8261) 0(0), 1(1), 2(2), 0~0, 1~1, 2~2, 3~3,
IEEE1588 V2 Clock 3(3), 4(4), 5(5), 4~4, 5~5, 6~6, 7~7,
Synchronization 6(6), 7(7), 8(8), 8~8, 9~9, 10~10,
Clock over IP 9(9), 10(10), 11(11), 11~11, 12~12,
(Huawei 12(12), 13(13), 13~13, 14~14,
proprietary) 14(14), 15(15), 15~15, 16~16,
IEEE 1588v2 over 16(16), 17(17), 17~17,
IPv6 Enumeration Type AUTO(AUTO) AUTO~65535 None
Synchronization
Clock Source
Switching Manually
or Automatically
Synchronization
with GPS
Synchronization
with BITS
Synchronization GPS(GPS Clock),
with 1PPS BITS(BITS Clock),
Synchronization IPCLK(IP Clock),
with E1/T1 SYNCETH(SyncEth
Enhanced Clock),
Synchronization LINECLK(Line
Synchronization Clock), TOD(TOD
with Ethernet (ITU- Clock), GPS~0, BITS~1,
T G.8261) PEERCLK(Peer IPCLK~2,
IEEE1588 V2 Clock Clock), SYNCETH~3,
Synchronization SYNCETH+IPCLK( LINECLK~4,
Clock over IP SyncEth Clock+IP TOD~5,
(Huawei Clock), PEERCLK~6,
proprietary) GPS+SYNCETH(G SYNCETH+IPCLK~
IEEE 1588v2 over PS Clock+SyncEth 7,
IPv6 Enumeration Type Clock) GPS+SYNCETH~8 None
Synchronization
Clock Source
Switching Manually
or Automatically
Free-running Mode
Synchronization
with GPS
Synchronization
with BITS
Synchronization
with 1PPS
Synchronization
with E1/T1
Enhanced
Synchronization
Synchronization
with Ethernet (ITU-
T G.8261)
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei
proprietary) AUTO(Auto), AUTO~0,
IEEE 1588v2 over MANUAL(Manual), MANUAL~1,
IPv6 Enumeration Type FREE(Free) FREE~2 None
Enhanced
Synchronization
IEEE1588 V2 Clock
Synchronization DEFAULT(DEFAUL
Clock over IP T),
(Huawei CLASSA(CLASSA), DEFAULT~0,
proprietary) CLASSB(CLASSB), CLASSA~1,
IEEE 1588v2 over CUSTOM(CUSTOM CLASSB~2,
IPv6 Enumeration Type ) CUSTOM~3 None
Enhanced
Synchronization
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei
proprietary)
IEEE 1588v2 over
Enhanced
Synchronization
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei
proprietary)
IEEE 1588v2 over
Enhanced
Synchronization
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei
proprietary)
IEEE 1588v2 over
Enhanced
Synchronization
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei
proprietary)
IEEE 1588v2 over
Enhanced
Synchronization
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei
proprietary)
IEEE 1588v2 over
IPv6 Interval Type 1~18000 N/A s
Enhanced
Synchronization
Synchronization
with Ethernet (ITU-
T G.8261)
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei ABSOLUTE(ABSO
proprietary) LUTE), ABSOLUTE~0,
IEEE 1588v2 over RELATIVE(RELATI RELATIVE~1,
IPv6 Enumeration Type VE), OFF(OFF) OFF~2 None
Enhanced
Synchronization
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei
proprietary)
IEEE 1588v2 over
IPv6 Interval Type 3~200 N/A h
Enhanced
Synchronization
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei
proprietary)
IEEE 1588v2 over
IPv6 Compound Type 00:00:00~23:59:59 N/A None
Synchronization
Clock Source
Switching Manually
or Automatically
Synchronization
with GPS
Synchronization
with BITS
Synchronization
with 1PPS
Synchronization
with E1/T1
Enhanced
Synchronization
Synchronization
with Ethernet (ITU-
T G.8261)
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei
proprietary)
IEEE 1588v2 over FREQ(FREQ),
IPv6 Enumeration Type TIME(TIME) FREQ~0, TIME~1 None
NORMAL(Normal),
LOST(Lost),
UNAVAILABLE(Una
vailable),
FREDVAT(Frequen
cy Deviation), NORMAL~0,
JITTER(Jitter), LOST~1,
PHASEOUTSCOP UNAVAILABLE~2,
E(Phaseoutscope), FREDVAT~3,
UNKNOWN(Unkno JITTER~4,
wn), PHASEOUTSCOP
DIFFSRC(Inconsist E~5,
ent Clock UNKNOWN~6,
None Enumeration Type References) DIFFSRC~7 None
FREERUNNING(Fr
ee running),
FASTTRACKING(F
ast tracking),
LOCKED(Locked), FREERUNNING~0,
HOLDOVER(Holdo FASTTRACKING~1
ver), , LOCKED~2,
UNKNOWN(Unkno HOLDOVER~3,
GPS(GPS Clock),
BITS(BITS Clock),
IPCLK(IP Clock),
SYNCETH(SyncEth
Clock),
LINECLK(Line
Clock), TOD(TOD
Clock), GPS~0, BITS~1,
PEERCLK(Peer IPCLK~2,
Clock), SYNCETH~3,
SYNCETH+IPCLK( LINECLK~4,
SyncEth Clock+IP TOD~5,
Clock), PEERCLK~6,
GPS+SYNCETH(G SYNCETH+IPCLK~
PS Clock+SyncEth 7,
None Enumeration Type Clock) GPS+SYNCETH~8 None

Synchronization
Enhanced
Synchronization
Synchronization
with Ethernet (ITU-
T G.8261) QL-PRC(QL-PRC),
IEEE1588 V2 Clock QL-SSU-A(QL-
Synchronization SSU-A), QL-SSU-
Clock over IP B(QL-SSU-B), QL- QL-PRC~2, QL-
(Huawei EEC2(QL-EEC2), SSU-A~4, QL-SSU-
proprietary) QL-EEC1(QL- B~8, QL-EEC2~10,
IEEE 1588v2 over EEC1), QL- QL-EEC1~11, QL-
IPv6 Enumeration Type DNU(QL-DNU) DNU~15 None
NOT_STARTED(Ph
ase Lock Not
Started),
SUCCEED(Phase
Lock Succeeded),
TRACKING(Phase NOT_STARTED~0,
Lock Tracking), SUCCEED~1,
FAILED(Phase TRACKING~2,
None Enumeration Type Lock Failed) FAILED~3 None
300SEC(300
Seconds),
480SEC(480 300SEC~0,
None Enumeration Type Seconds) 480SEC~1 None
GEN(General
Mode),
ENH(Enhanced
None Enumeration Type Mode) GEN~0, ENH~1 None
None Enumeration Type ON(On), OFF(Off) ON~0, OFF~1 None

Enhanced
Synchronization
IEEE1588 V2 Clock
Synchronization
Clock over IP
(Huawei
proprietary)
IEEE 1588v2 over
None Interval Type 0~80 N/A 1/8bit

UL(UL), DL(DL),
ULDL(Combined UL~0, DL~1,
None Enumeration Type UL and DL) ULDL~2 None
NULL(NULL),
DEM_4_CHAN(4-
Channels
Demodulation
Mode),
DEM_ECON_4_CH
AN(Economical 4-
Channels
Demodulation
Mode), NULL~0,
DEM_2_CHAN(2- DEM_4_CHAN~1,
Channels DEM_ECON_4_CH
Demodulation AN~3,
None Enumeration Type Mode) DEM_2_CHAN~4 None
BASEBANDEQMB
None OARDREF[] 0~12 N/A None

Character String
Character String
Character String
SECTORANTENNA
None REF[] 0~216 N/A None
R0A(R0A),
R0B(R0B),
R0C(R0C),
R0D(R0D),
R0E(R0E),
R0F(R0F),
R0G(R0G),
R0H(R0H),
R1A(R1A),
R1B(R1B),
R1C(R1C),
R1D(R1D),
R2A(R2A),
R2B(R2B),
R2C(R2C),
R2D(R2D),
R3A(R3A),
R3B(R3B), R0A~0, R0B~1,
R3C(R3C), R0C~2, R0D~3,
R3D(R3D), R0E~4, R0F~5,
R4A(R4A), R0G~6, R0H~7,
R4B(R4B), R1A~16, R1B~17,
R4C(R4C), R1C~18, R1D~19,
R4D(R4D), R2A~32, R2B~33,
R5A(R5A), R2C~34, R2D~35,
R5B(R5B), R3A~48, R3B~49,
R5C(R5C), R3C~50, R3D~51,
R5D(R5D), R4A~64, R4B~65,
R6A(R6A), R4C~66, R4D~67,
R6B(R6B), R5A~80, R5B~81,
R6C(R6C), R5C~82, R5D~83,
R6D(R6D), R6A~96, R6B~97,
R7A(R7A), R6C~98, R6D~99,
R7B(R7B), R7A~112,
R7C(R7C), R7B~113,
None Enumeration Type R7D(R7D) R7C~114, R7D~115 None

Character String
None Type 0~40 characters N/A 0.1MHz
Character String
None Type 0~40 characters N/A 0.1MHz
GL_LICENSE(GSM
/LTE Dual Mode
License),
UL_LICENSE(UMT
S/LTE Dual Mode
License),
CL_LICENSE(CDM
A/LTE Dual Mode
License),
GU_LICENSE(GSM
/UMTS Dual Mode GL_LICENSE~0,
License), UL_LICENSE~1,
CU_LICENSE(CDM CL_LICENSE~2,
A/UMTS Dual Mode GU_LICENSE~3,
None Enumeration Type License) CU_LICENSE~4 None
NORMAL(Normal),
ABNORMAL(Abnor NORMAL~0,
None Enumeration Type mal) ABNORMAL~1 None
SECTOREQMANT
None ENNAREF[] 0~216 N/A None
R0A(R0A),
R0B(R0B),
R0C(R0C),
R0D(R0D),
R0E(R0E),
R0F(R0F),
R0G(R0G),
R0H(R0H),
R1A(R1A),
R1B(R1B),
R1C(R1C),
R1D(R1D),
R2A(R2A),
R2B(R2B),
R2C(R2C),
R2D(R2D),
R3A(R3A),
R3B(R3B), R0A~0, R0B~1,
R3C(R3C), R0C~2, R0D~3,
R3D(R3D), R0E~4, R0F~5,
R4A(R4A), R0G~6, R0H~7,
R4B(R4B), R1A~16, R1B~17,
R4C(R4C), R1C~18, R1D~19,
R4D(R4D), R2A~32, R2B~33,
R5A(R5A), R2C~34, R2D~35,
R5B(R5B), R3A~48, R3B~49,
R5C(R5C), R3C~50, R3D~51,
R5D(R5D), R4A~64, R4B~65,
R6A(R6A), R4C~66, R4D~67,
R6B(R6B), R5A~80, R5B~81,
R6C(R6C), R5C~82, R5D~83,
R6D(R6D), R6A~96, R6B~97,
R7A(R7A), R6C~98, R6D~99,
R7B(R7B), R7A~112,
R7C(R7C), R7B~113,
None Enumeration Type R7D(R7D) R7C~114, R7D~115 None

RX_MODE(RX),
TX_MODE(TX), RX_MODE~1,
RXTX_MODE(RX TX_MODE~2,
None Enumeration Type And TX) RXTX_MODE~3 None

MASTER(Master), MASTER~0,
None Enumeration Type SLAVE(Slave) SLAVE~1 None
None Enumeration Type UBRI(UBRI) UBRI~20 None
BLOCKED(Blocked
),
UNBLOCKED(Unbl BLOCKED~0,
None Enumeration Type ocked) UNBLOCKED~1 None

IMMEDIATE(Immed
iate),
SHUTDOWN(Shutd IMMEDIATE~0,
own), SHUTDOWN~1,
None Enumeration Type DELAY(Delay) DELAY~2 None
Alarm_0(Normal), Alarm_0~0,
Alarm_1(Warning), Alarm_1~1,
Alarm_2(Minor), Alarm_2~2,
Alarm_4(Major), Alarm_4~4,
Alarm_8(Critical), Alarm_8~8,
None Enumeration Type Alarm_15(Critical) Alarm_15~15 None
Avail_c33(Uninstall Avail_1~1,
ed, Fault, In test), Avail_20~32,
Avail_c34(Unconfig Avail_21~33,
ured, Power off, In Avail_500~1280,
test), Avail_501~1281,
Avail_d00(Commun Avail_504~1284,
ication lost), Avail_508~1288,
Avail_d01(Fault, Avail_509~1289,
Communication Avail_520~1312,
lost), Avail_521~1313,
Avail_d04(Unconfig Avail_524~1316,
ured, Avail_528~1320,
Avail_d08(Inconsist Avail_801~2049,
ent, Communication Avail_820~2080,
Avail_d09(Inconsist Avail_c10~3088,
ent, Fault, Avail_c11~3089,
Communication Avail_c12~3090,
lost), Avail_c13~3091,
Avail_d20(Commun Avail_c14~3092,
ication lost,In test), Avail_c30~3120,
Avail_d21(Fault, Avail_c31~3121,
lost, In test), Avail_c33~3123,
Avail_d24(Unconfig Avail_c34~3124,
ured, Avail_d00~3328,
Communication Avail_d01~3329,
lost, In test), Avail_d04~3332,
Avail_d28(Inconsist Avail_d08~3336,
ent, Communication Avail_d09~3337,
ent, Fault, Avail_d24~3364,
None Enumeration Type lost, In test) Avail_d29~3369 None
Character String
Character String
Character String
Character String
Character String
Character String
Character String
RHUB(RHUB), UEIU~13, FMU~14,
UBRI(UBRI), MRRU~15,
MRXU(MRXU), MRFU~16,
MTXU(MTXU), RHUB~17,
UCIU(UCIU), UBRI~20,
CCU(CCU), MRXU~22,
SMPT(SMPT), MTXU~23,
UCXU(UCXU), UCIU~24, CCU~25,
AAMU(AAMU), SMPT~39,
AARU(AARU), UCXU~40,
UNKNOWN(UNKN AAMU~42,
OWN), AARU~43,
PRRU(PRRU), UNKNOWN~254,
MPRU(MPRU), PRRU~271,
MPMU(MPMU), MPRU~527,
MPRF(MPRF), MPMU~783,
AIRU(AIRU), MPRF~1039,
GTMU(GTMU), AIRU~1295,
GBBP(GBBP), GTMU~4097,
GRRU(GRRU), GBBP~4098,
GRFU(GRFU), GRRU~4111,
GATM(GATM), GRFU~4112,
DRFU(DRFU), GATM~4114,
WMPT(WMPT), DRFU~4368,
WBBP(WBBP), WMPT~8193,
WRFU(WRFU), WBBP~8194,
NGRU(NGRU), WRFU~8208,
LMPT(LMPT), NGRU~8211,
LBBP(LBBP), LMPT~12289,
LRRU(LRRU), LBBP~12290,
LRFU(LRFU), LRRU~12303,
BMPT(BMPT), LRFU~12304,
BBBI(BBBI), BMPT~16385,
BRFU(BRFU), BBBI~16386,
CRFU(CRFU), BRFU~16400,
UBBPX(UBBP(TDS CRFU~20496,
None Enumeration Type )) UBBPX~24578 None
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
483647(imperial Celsius(degree
None Interval Type system) N/A Fahrenheit)
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
CABINET(CABINE
T),
SUBRACK(SUBRA
CK), CABINET~0,
BOARD(BOARD), SUBRACK~1,
SUBBOARD(SUBB BOARD~2,
OARD), SFP(SFP), SUBBOARD~3,
None Enumeration Type GPS(GPS) SFP~4, GPS~5 None
Character String
Character String
Character String
None Enumeration Type GTMU(GTMU) GTMU~4097 None
BLOCKED(Blocked
),

IMMEDIATE(Immed
iate),
own), SHUTDOWN~1,
Character String
Character String
Character String
Character String
Character String
Character String
Character String
CCU(CCU), MRXU~22,
OWN), AARU~43,
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
CABINET(CABINE
T),
SUBRACK(SUBRA
CK), CABINET~0,
Character String
Character String
Character String
Character String
-
32767~32767(metri
c system);-
107502~107502(im
Character String
Character String
Degree(Degree), Degree~0,
None Enumeration Type Second(Second) Second~1 None
-
90000000~900000
None Interval Type 00 N/A 1e-6 degree
Character String
None Type 0~64 characters N/A s
Character String
-
180000000~18000
None Interval Type 0000 N/A 1e-6 degree
Character String
None Type 0~64 characters N/A s
Character String
1~100000(metric
system);3~328080(i
None Interval Type mperial system) N/A m(ft)
Character String
Character String
Character String
0~1000(metric
system);0~3281(im
DISABLE(DISABLE
), DISABLE~0,
None Enumeration Type ENABLE(ENABLE) ENABLE~1 None
0~1,7~8,11~12,14~
None Interval Type 15,40~59,60~254 N/A None

Character String
Character String
Character String
Character String
Character String
Character String
Character String
Character String
Character String
Character String
DBS3900_LTE(DB
S3900 LTE),
BTS3900_LTE(BTS
3900 LTE),
BTS3900A_LTE(BT
S3900A LTE), DBS3900_LTE~1,
BTS3900L_LTE(BT BTS3900_LTE~2,
S3900L LTE), BTS3900A_LTE~3,
BTS3900AL_LTE(B BTS3900L_LTE~4,
TS3900AL LTE), BTS3900AL_LTE~5
DBS3900A_LTE(D ,
None Enumeration Type BS3900A LTE) DBS3900A_LTE~6 None
Character String
Character String
Character String
NON-
CONCURRENT(No NON-
None Enumeration Type n-ConCurrent) CONCURRENT~1 None
UBBP(UBBP), UBBP~2,
GBBP(GBBP), GBBP~4098,
WBBP(WBBP), WBBP~8194,
None Enumeration Type LBBP(LBBP) LBBP~12290 None
FDD(Frequency
Division Duplex),
TDD(Time Division
Duplex),
HYBRID(HYBRID),
TDD_ENHANCE(S
upport TDD BF), FDD~0, TDD~1,
TDD_8T8R(TDD_8 HYBRID~2,
T8R), TDD_ENHANCE~3,
TDD_TL(TDD_TL), TDD_8T8R~4,
FDD_ATG(AirToGro TDD_TL~5,
None Enumeration Type und) FDD_ATG~6 None
BLOCKED(Blocked
),

IMMEDIATE(Immed
iate),
own), SHUTDOWN~1,
NORMAL(NORMAL NORMAL~0,
None Enumeration Type ), FULL(FULL) FULL~255 None
None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
NULL(NULL),
None Enumeration Type UMTS(UMTS) NULL~0, UMTS~2 None
Character String
Character String
Character String
Character String
Character String
Character String
Character String
Character String
CCU(CCU), MRXU~22,
OWN), AARU~43,
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
CABINET(CABINE
T),
SUBRACK(SUBRA
CK), CABINET~0,
Character String
Character String
Character String

LBR0(NULL),
LBR1(1.25),
LBR2(2.5),
LBR3(3.0), LBR0~0, LBR1~1,
LBR4(4.9), LBR2~2, LBR3~4,
LBR5(6.1), LBR4~8, LBR5~16,
None Enumeration Type LBR6(9.8) LBR6~32 Gbit/s

LBR0(NULL),
LBR1(1.25),
LBR2(2.5),
LBR3(3.0), LBR0~0, LBR1~1,
LBR4(4.9), LBR2~2, LBR3~4,
LBR5(6.1), LBR4~8, LBR5~16,
None Enumeration Type LBR6(9.8) LBR6~32 Gbit/s

-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
Character String
Character String
Character String
Character String
Character String
Character String
Character String
CCU(CCU), MRXU~22,
OWN), AARU~43,
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
CABINET(CABINE
T),
SUBRACK(SUBRA
CK), CABINET~0,
Character String
Character String
Character String
Environment
Monitoring Enumeration Type NO(NO), YES(YES) NO~0, YES~1 None
Environment
GSM(GSM),
Environment UMTS(UMTS), GSM~0, UMTS~1,
Monitoring Bit Field Type LTE(LTE) LTE~2 None
WS_DISABLE(Wat
er-Immersed
Sensor Disabled),
Environment SS_DISABLE(Smo WS_DISABLE~0,
Monitoring Bit Field Type g Sensor Disabled) SS_DISABLE~1 None
CONNECTED(Con
nected), CONNECTED~0,
DISCONNECTED( DISCONNECTED~
None Enumeration Type Disconnected) 1 None
CONNECTED(Con
nected), CONNECTED~0,
DISCONNECTED( DISCONNECTED~
None Enumeration Type Disconnected) 1 None

BasicCascadePort(
Basic Cascade
Port), BasicCascadePort~
ExpandedCascade 0,
Port(Expanded ExpandedCascade
None Enumeration Type Cascade Port) Port~1 None

None Interval Type 0~1,4~5,60~254 N/A None

614M(614M),
1.25G(1.25G),
2.5G(2.5G),
4.9G(4.9G),
6.1G(6.1G), 614M~0, 1.25G~1,
9.8G(9.8G), 2.5G~2, 4.9G~3,
UNKNOWN(UNKN 6.1G~4, 9.8G~5,
OWN), UNKNOWN~254,
None Enumeration Type NULL(NULL) NULL~255 bit/s
BLOCKED(Blocked
),
UNBLOCKED(Unbl
ocked), BLOCKED~0,
SHUTINGDOWN(S UNBLOCKED~1,
hutingdown), SHUTINGDOWN~2
None Enumeration Type INVALID(NULL) , INVALID~4 None
INPOSITION(In
Position),
NOTINPOSITION(N INPOSITION~0,
ot In Position), NOTINPOSITION~
None Enumeration Type INVALID(NULL) 1, INVALID~255 None
Slave(Slave),
Master(Master), Slave~0, Master~1,
SFP_OPTICAL(SF
P_OPTICAL),
ESFP_OPTICAL(E
SFP_OPTICAL),
SFP_ELECTRIC(S
FP_ELECTRIC), SFP_OPTICAL~0,
SCSI_ELECTRIC(S ESFP_OPTICAL~1,
CSI_ELECTRIC), SFP_ELECTRIC~2,
GE(CPRI_E), SCSI_ELECTRIC~
UNKNOWN(UNKN 3, GE~4,
OWN), UNKNOWN~254,
CPRI_MUX(CPRI
MUX), CPRI_MUX~0,
UNKNOWN(Unkno UNKNOWN~254,
None Enumeration Type wn), NULL(NULL) NULL~255 None
Power
Consumption
Monitoring Enumeration Type DC(DC), AC(AC) DC~0, AC~1 None

UMPT(UMPT), UMPT~1,
WMPT(WMPT), WMPT~8193,
None Enumeration Type LMPT(LMPT) LMPT~12289 None
Unknown(Unknown
), NULL(NULL), Unknown~0,
Active(Active), NULL~1, Active~2,
Standby(Standby), Standby~3,
None Enumeration Type Slave(Slave) Slave~9 None
Character String
Character String
Character String
Character String
Character String
Character String
Character String
CCU(CCU), MRXU~22,
OWN), AARU~43,
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
CABINET(CABINE
T),
SUBRACK(SUBRA
CK), CABINET~0,
Character String
Character String
Character String
None Enumeration Type NULL(NULL) NULL~4294967295 W
None Enumeration Type NULL(NULL) NULL~4294967295 W
Character String
Character String
Character String
Character String
Character String
Character String
Character String
CCU(CCU), MRXU~22,
OWN), AARU~43,
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
CABINET(CABINE
T),
SUBRACK(SUBRA
CK), CABINET~0,
Character String
Character String
Character String
PSU Intelligent DISABLE(Disable), DISABLE~0,

Sleep Mode Enumeration Type ENABLE(Enable) ENABLE~1 None
None Interval Type 0~1,4~5,60~254 N/A None

INPOSITION(In
Position),
NOTINPOSITION(N INPOSITION~0,
ot In Position), NOTINPOSITION~
None Enumeration Type INVALID(NULL) 1, INVALID~255 None
SFP(SFP),
ESFP(ESFP),
SFP_ELECTRIC(S
FP_ELECTRIC), SFP~0, ESFP~1,
QSFP(QSFP), SFP_ELECTRIC~2,
EQSFP(QSFP_ELE QSFP~3,
CTRIC), EQSFP~4,
CPRI_E(CPRI_E), CPRI_E~5,
UNKNOWN(UNKN UNKNOWN~42949
None Enumeration Type OWN) 67295 None
Character String
SINGLEMODE(SIN
GLEMODE),
MULTIMODE(MULT SINGLEMODE~0,
IMODE), MULTIMODE~1,
UNKNOWN(UNKN UNKNOWN~42949
None Enumeration Type OWN) 67295 None
None Interval Type 0~65535 N/A nm
None Interval Type 0~255 N/A 100Mbit/s

0~255(metric
system);0~158(imp
None Interval Type erial system) N/A km(mi.)
0~255(metric
system);0~837(imp
None Interval Type erial system) N/A 100m(100ft)
0~255(metric
system);0~837(imp
0~255(metric
system);0~837(imp
-1280~1280(metric
system);- 0.1 degree
1980~2620(imperial Celsius(0.1 degree
None Interval Type 0~65535 N/A 100microvolt
None Interval Type 0~65535 N/A 2microampere
None Interval Type 0~65535 N/A 0.1microwatt

NULL(NULL),
UAEC(UAEC),
UIEC(UIEC),
UUAS(UUAS),
UQEC(UQEC), NULL~0, UAEC~4,
UEOC(UEOC), UIEC~5, UUAS~6,
UIEB(UIEB), UQEC~7, UEOC~8,
None Enumeration Type UTRPc(UTRPc) UIEB~9, UTRPc~10 None
Character String
Character String
Character String
Character String
Character String
Character String
Character String
CCU(CCU), MRXU~22,
OWN), AARU~43,
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
CABINET(CABINE
T),
SUBRACK(SUBRA
CK), CABINET~0,
Character String
Character String
Character String
Character String
Character String
Character String
Character String
Character String
Character String
Character String
CCU(CCU), MRXU~22,
OWN), AARU~43,
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
CABINET(CABINE
T),
SUBRACK(SUBRA
CK), CABINET~0,
Character String
Character String
Character String
Character String
Character String
Character String
Character String
Character String
Character String
Character String
CCU(CCU), MRXU~22,
OWN), AARU~43,
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
CABINET(CABINE
T),
SUBRACK(SUBRA
CK), CABINET~0,
Character String
Character String
Character String
Character String
Character String
Character String
Character String
Character String
Character String
Character String
CCU(CCU), MRXU~22,
OWN), AARU~43,
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
CABINET(CABINE
T),
SUBRACK(SUBRA
CK), CABINET~0,
Character String
Character String
Character String
Intelligent Battery
Management Enumeration Type ON(ON), OFF(OFF) ON~0, OFF~1 None
None Enumeration Type ON(ON), OFF(OFF) ON~0, OFF~1 None

NORMAL(NORMAL
),
INSTALL(INSTALL),
EXPAND(EXPAND)
,
UPGRADE(UPGRA
DE),
TESTING(TESTIN
G),
ExpandStatus1(Exp
andStatus1),
ExpandStatus2(Exp
andStatus2),
ExpandStatus3(Exp NORMAL~0,
andStatus3), INSTALL~1,
ExpandStatus4(Exp EXPAND~2,
andStatus4), UPGRADE~3,
ExpandStatus5(Exp TESTING~4,
andStatus5), ExpandStatus1~5,
ExpandStatus6(Exp ExpandStatus2~6,
ExpandStatus10(Ex ExpandStatus10~1
None Enumeration Type pandStatus10) 4 None
2000-01-
01T00:00:00+00:00
~2037-12-
None Compound Type 31T23:59:59+00:00 N/A None
2000-01-
01T00:00:00+00:00
~2037-12-
None Compound Type 31T23:59:59+00:00 N/A None
Character String
NORMAL(NORMAL
),
INSTALL(INSTALL),
EXPAND(EXPAND)
,
UPGRADE(UPGRA
DE),
TESTING(TESTIN
G),
ExpandStatus1(Exp
andStatus1),
ExpandStatus2(Exp
andStatus2),
ExpandStatus3(Exp NORMAL~0,
andStatus3), INSTALL~1,
ExpandStatus4(Exp EXPAND~2,
andStatus4), UPGRADE~3,
ExpandStatus5(Exp TESTING~4,
ExpandStatus10(Ex ExpandStatus10~1
None Enumeration Type pandStatus10) 4 None
None Interval Type 390~480 N/A 0.1V

DBS3900(DBS3900
), DBS3900-
1U(DBS3900-1U),
BTS3900(BTS3900
),
BTS3900A(BTS390
0A),
BTS3900L(BTS390
0L), DBS3900~0,
BTS3900AL(BTS39 DBS3900-1U~1,
00AL), BTS3900- BTS3900~2,
1U(BTS3900-1U), BTS3900A~3,
BBP530(BBP530), BTS3900L~4,
BTS3803E(BTS380 BTS3900AL~5,
3E), BTS3900-1U~6,
DBS3900A(DBS39 BBP530~8,
00A), BTS3803E~12,
USU3900(USU390 DBS3900A~13,
None Enumeration Type 0) USU3900~14 None
CPRI(CPRI),
None Enumeration Type TDL_IR(TDL_IR) CPRI~0, TDL_IR~1 None
APM30(APM30),
TMC(TMC),
BBC(BBC),
APM100(APM100),
APM200(APM200),
PS4890(PS4890),
OMB(OMB),
RFC(RFC), APM30~128,
BTS3900(BTS3900 TMC~129,
), BBC~130,
BTS3900L(BTS390 APM100~131,
0L), APM200~132,
BTS3900AL(BTS39 PS4890~133,
00AL), OMB~134,
VIRTUAL(Virtual RFC~135,
Cabinet), BTS3900~136,
BTS3900D(BTS390 BTS3900L~137,
0D), BTS3900AL~138,
BTS3012_SRAN(B VIRTUAL~142,
TS3012_SRAN), BTS3900D~143,
BTS3012AE_SRAN BTS3012_SRAN~1
(BTS3012AE_SRA 44,
N), BTS3012AE_SRAN
BTS3012II_SRAN( ~145,
BTS3012II_SRAN), BTS3012II_SRAN~
TP48300A(TP4830 146,
0A), TP48300A~148,
TP48600A(TP4860 TP48600A~154,
None Enumeration Type 0A), ILC29(ILC29) ILC29~155 None
Character String
Character String

BBU3900(BBU3900
Subrack),
RFU(RFU
Subrack),
PMU(PMU
Subrack),
TCU(TCU
Subrack),
FMU(FMU
Subrack),
RRU(RRU
Subrack),
RHUB(RHUB
Subrack),
PRRU(PRRU
Subrack),
EMU(EMU BBU3900~128,
Subrack), RFU~129,
GRU(GRU PMU~130,
Subrack), TCU~131,
BBU3900- FMU~132,
1U(BBU3900-1U RRU~134,
Subrack), RHUB~135,
GATM(GATM PRRU~136,
Subrack), EMU~137,
PICO(PICO GRU~138,
Subrack), BBU3900-1U~139,
CCU(CCU GATM~140,
Subrack), AAS(AAS PICO~147,
Subrack), CCU~148,
UNKNOW(Unknow AAS~156,
None Enumeration Type Subrack) UNKNOW~255 None
Character String
AC220V(AC 220V),
DC-48V(DC -48V),
DC+28V(DC +28V),
DC+24V(DC +24V),
DC-48V-2(DC AC220V~0, DC-
-48V), AC110V(AC 48V~1, DC+28V~2,
110V), RDC- DC+24V~3, DC-
48V(RDC -48V), 48V-2~4,
NDC-48V(NDC AC110V~5, RDC-
None Enumeration Type -48V) 48V~6, NDC-48V~7 None
Character String
Character String
Character String
Character String
Character String
Character String
Character String
CCU(CCU), MRXU~22,
OWN), AARU~43,
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
CABINET(CABINE
T),
SUBRACK(SUBRA
CK), CABINET~0,
Character String
Character String
Character String
Environment
Environment
Environment
Environment
-20~80(metric
system);- degree
Environment 4~176(imperial Celsius(degree
Monitoring Interval Type system) N/A Fahrenheit)
-20~80(metric
system);- degree
Environment
Monitoring Interval Type 0~100 N/A %
Environment
48V_DISABLE(-48
Voltage Disabled),
RES0(Reserved
Sensor 0),
RES1(Reserved
Sensor 1),
RES2(Reserved
Sensor 2),
TS_DISABLE(Temp
erature Sensor 48V_DISABLE~0,
Disabled), RES0~1, RES1~2,
HS_DISABLE(Humi RES2~3,
Environment dity Sensor TS_DISABLE~4,
Monitoring Bit Field Type Disabled) HS_DISABLE~5 None
WS_DISABLE(Wat
er -Immersed
Sensor Disabled),
SS_DISABLE(Smo
g Sensor Disabled),
IS_DISABLE(Infrar
ed Sensor
Disabled), WS_DISABLE~0,
GS_DISABLE(Gati SS_DISABLE~1,
Environment ng Sensor IS_DISABLE~2,
Monitoring Bit Field Type Disabled) GS_DISABLE~3 None
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
Character String
None Type 1~7 characters N/A V
Character String
Character String
Character String
Character String
Character String
Character String
Character String
Character String
Character String
Character String
Character String
CCU(CCU), MRXU~22,
OWN), AARU~43,
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
CABINET(CABINE
T),
SUBRACK(SUBRA
CK), CABINET~0,
Character String
Character String
Character String
Environment
Environment
Environment
Environment
WS_DISABLE(Wat
er-Immersed
Sensor Disabled),

-127~127(metric
system);- degree
197~261(imperial Celsius(degree
-127~127(metric
system);- degree
None Interval Type 0~4294967295 N/A r/min
Environment DISABLE(Disable), DISABLE~0,

Monitoring Enumeration Type ENABLE(Enable) ENABLE~1 None
Environment
Character String
Character String
Character String
Character String
Character String
Character String
Character String
CCU(CCU), MRXU~22,
OWN), AARU~43,
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
CABINET(CABINE
T),
SUBRACK(SUBRA
CK), CABINET~0,
Character String
Character String
Character String
None Interval Type 8,14 N/A None
Environment
Environment
Environment
Environment
-40~10(metric
system);- degree
20~80(metric degree
Environment system);68~176(im Celsius(degree
Monitoring Interval Type perial system) N/A Fahrenheit)
WS_DISABLE(Wat
er-Immersed
Sensor Disabled),
Character String
-127~127(metric
system);- degree
-127~127(metric
system);- degree
-127~127(metric
system);- degree

None Interval Type 0~4294967295 N/A W
Character String
Character String
dantherm(dantherm
), bw(b + w),
huawei(huawei),
air-sys(air-sys),
senguang(senguan
g),
viasystems(viasyste
ms), rittal(rittal), dantherm~0, bw~1,
emerson(emerson), huawei~2, air-
APW(APW), sys~3,
hytems(hytems), senguang~4,
hontech(hontech), viasystems~5,
agisson(agisson), rittal~6, emerson~7,
pantair(pantair), APW~8, hytems~9,
Panasonic(Panaso hontech~10,
nic), Gore(Gore), agisson~11,
Flex(Flex), pantair~12,
Vapel(Vapel), Panasonic~13,
AVC(AVC), Gore~14, Flex~15,
JIAYI(JIAYI), Vapel~16, AVC~17,
Delta(Delta), JIAYI~18, Delta~19,
EBM(EBM), EBM~20,
Protechnic(Protech Protechnic~21,
None Enumeration Type nic), Sanyo(Sanyo) Sanyo~22 None
Environment
Character String
Character String
Character String
Character String
Character String
Character String
Character String
CCU(CCU), MRXU~22,
OWN), AARU~43,
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
CABINET(CABINE
T),
SUBRACK(SUBRA
CK), CABINET~0,
Character String
Character String
Character String
None Interval Type 8,14 N/A None
-99~70(metric
system);- degree
-99~70(metric
system);- degree
-99~70(metric
system);- degree
0~30(metric degree
Environment system);32~86(imp Celsius(degree
Monitoring Interval Type erial system) N/A Fahrenheit)
0~30(metric degree
0~30(metric degree
0~30(metric degree

Environment
APM100(APM 100),
APM200(APM 200),
APM30(APM 30),
EPS4890(EPS4890
), APM100~0,
EPS4815(EPS4815 APM200~1,
), APM30~2,
SC48200(SC48200 EPS4890~3,
), EPS4815~4,
EPS48200(EPS482 SC48200~5,
00), EPS48200~7,
Environment TP48300A(TP4830 TP48300A~8,
Monitoring Enumeration Type 0A), ETP(ETP) ETP~10 None
Environment
Monitoring Interval Type 60~300 N/A V
Environment
Monitoring Interval Type 60~300 N/A V
Environment
Monitoring Interval Type 350~556 N/A 0.1V
Environment
Environment
-20~20(metric
system);- degree
35~80(metric degree
Environment system);95~176(im Celsius(degree
Monitoring Interval Type perial system) N/A Fahrenheit)
Environment
Environment
BT1_DISABLE(Batt
ery Temperature
Sensor 1 Disabled),
AH_DISABLE(Cabi
net Humidity
Sensor Disabled),
AT1_DISABLE(Cabi
net Temperature
Sensor 1 Disabled), BT1_DISABLE~0,
BT2_DISABLE(Batt AH_DISABLE~1,
Environment ery Temperature AT1_DISABLE~2,
Monitoring Bit Field Type Sensor 2 Disabled) BT2_DISABLE~3 None
WS_DISABLE(Wat
er-Immersed
Sensor Disabled),
SS_DISABLE(Smo
g Sensor Disabled),
GS_DISABLE(Gati WS_DISABLE~0,
Environment ng Sensor SS_DISABLE~1,
Monitoring Bit Field Type Disabled) GS_DISABLE~2 None
-
2147483648~2147
None Interval Type 483647 N/A V
Character String
Character String
None Type 1~7 characters N/A A
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
PowerOn(Power
on),
LowVoltagePowerO
ff(Low voltage
power off),
MasterControlPowe
rOff(Master control
power off), PowerOn~0,
HighTemperaturePo LowVoltagePowerO
werOff(High ff~1,
temperature power MasterControlPowe
off), rOff~2,
LowTemperaturePo HighTemperaturePo
werOff(Low werOff~3,
temperature power LowTemperaturePo
None Enumeration Type off) werOff~4 None
BoostCharging(Boo
st-Charging),
FloatCharging(Float
-Charging),
ForceBoostChargin
g(ForceBoost- BoostCharging~0,
Charging), FloatCharging~1,
Discharging(Discha ForceBoostChargin
rging), g~2, Discharging~3,
None Enumeration Type Sleeping(Sleeping) Sleeping~4 None
Character String
CurrentLimiting(Cur
rent limiting), CurrentLimiting~0,
NoCurrentLimiting( NoCurrentLimiting~
No current limiting), 1,
PowerOn(Power
on),
LowVoltagePowerO
ff(Low voltage
power off),
MasterControlPowe
rOff(Master control PowerOn~0,
power off), LowVoltagePowerO
ManualPowerOff(M ff~1,
anual power off), MasterControlPowe
HighTemperaturePo rOff~2,
werOff(High ManualPowerOff~3,
temperature power HighTemperaturePo
None Enumeration Type off) werOff~4 None
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
CHARGE(Charging
),
DISCHARGE(Disch
arging), CHARGE~0,
REC(Recording), DISCHARGE~1,
None Enumeration Type END(Finished) REC~2, END~3 None
Character String
Character String
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
Character String
Character String
Character String
u Switchtec Power
Systems Co.,LTD.),
TycoElectronics(Tyc
o Electronics
(Shang hai)
Co.,Ltd.),
ARTESYN(Artesyn
Technologies
Co.,Ltd.),
CHROMA(Chroma
Electronics),
LuckyValley(Lucky
Valley Technology
Co.,Ltd),
ACBEL(Acbel
Electronic Co.,Ltd),
Zippy(Zippy
Technology corp.),
GuoyaoElectronics( Huawei~0,
Shenzhen Guoyao Emerson~1,
Electronics Holdluck-ZYT~2,
Technology Power-One~3,
Co.,LTD.), Kehua~4,
DPC(Beijing DeltaElectronics~5,
Dynamic Power EltekEnergy~6,
Science & Switchtec~7,
Technology TycoElectronics~8,
Co.,Ltd.), ARTESYN~9,
GoldPower(Shenzh CHROMA~10,
en Gold Power Elec LuckyValley~11,
Tech Co.,Ltd), ACBEL~12,
SungrowPowerSup Zippy~13,
ply(Sungrow Power GuoyaoElectronics
Supply Co.,Ltd), ~14, DPC~15,
Ecom(Beijing Ecom GoldPower~16,
Communications SungrowPowerSup
None Enumeration Type Technology Co. Ltd) ply~17, Ecom~18 None
UNSUPPORTED(N
ot Supported),
SUPPORTED(Supp UNSUPPORTED~0
None Enumeration Type orted) , SUPPORTED~1 None
None Interval Type 0~4294967295 N/A h
UNSUPPORTED(N
ot Supported),
SUPPORTED(Supp UNSUPPORTED~0
None Enumeration Type orted) , SUPPORTED~1 None
Character String
Character String
Character String
Character String
Character String
Character String
Character String
CCU(CCU), MRXU~22,
OWN), AARU~43,
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
CABINET(CABINE
T),
SUBRACK(SUBRA
CK), CABINET~0,
Character String
Character String
Character String

Environment
Monitoring Interval Type 1~1000 N/A 0.1kVA
1~7
characters(metric
system);1~7
Character String characters(imperial
None Type system) N/A cm(0.1in.)
Character String

Intelligent Battery INNER(Inner), INNER~0,
Management Enumeration Type OUTER(Outer) OUTER~1 None
None Interval Type 30~240 N/A day

Intelligent Battery
Management Interval Type 5~5000 N/A Ah
Intelligent Battery
Management Interval Type 5~25 N/A 0.01
Intelligent Battery
Management Interval Type 432~575 N/A 0.1V
Intelligent Battery DISABLE(Disable), DISABLE~0,

Management Enumeration Type ENABLE(Enable) ENABLE~1 None
40~70(metric degree
Intelligent Battery system);104~158(i Celsius(degree
Management Interval Type mperial system) N/A Fahrenheit)
Intelligent Battery DISABLE(Disable), DISABLE~0,
Management Enumeration Type ENABLE(Enable) ENABLE~1 None
Intelligent Battery
0~500(metric mV/degree
Intelligent Battery system);0~278(imp Celsius(mV/degree
Management Interval Type erial system) N/A Fahrenheit)
-20~20(metric
system);- degree
Intelligent Battery 4~68(imperial Celsius(degree
Management Interval Type system) N/A Fahrenheit)
35~80(metric degree
Intelligent Battery system);95~176(im Celsius(degree
Management Interval Type perial system) N/A Fahrenheit)
Intelligent Battery
VRLA_BAT(VRLA
Intelligent Battery Battery), LI_BAT(Li- VRLA_BAT~2,
Management Enumeration Type Ion Battery) LI_BAT~3 None




2000-01-01~2099-
None Compound Type 12-31 N/A None
Intelligent Battery
Management Interval Type 5~5000 N/A Ah

None Interval Type 1~5000 N/A 0.01h





Intelligent Battery
Management Interval Type 170~220 N/A 0.01V/cell
Intelligent Battery
Intelligent Battery
Management Interval Type 1~100 N/A h
Intelligent Battery
Management Interval Type 1~240 N/A min
Intelligent Battery
NOAUTOTEST(No
Auto Test),
PERIOD(Period
Auto Test),
POWERCUT(Powe
r Off Auto Test), NOAUTOTEST~0,
PERIODPOWERC PERIOD~1,
UT(Period and POWERCUT~2,
Intelligent Battery Power Off Auto PERIODPOWERC
Management Enumeration Type Test) UT~3 None
Intelligent Battery
Management Interval Type 30~240 N/A day
Intelligent Battery
Management Interval Type 1~60 N/A day
Character String
None Type 1~7 characters N/A h
Character String
Character String
None Interval Type 0~4294967295 N/A Ah

-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree

NORMAL(Normal),
COMMUNICATEFAI
LED(Communicatio
n failed),
SHUTDOWN(Shut NORMAL~0,
down), COMMUNICATEFAI
FAULT(Fault), LED~1,
PROTECT(Fault), SHUTDOWN~2,
UNCONFIGURED( FAULT~3,
Unconfigured), PROTECT~4,
ILLEGAL(Unconfigu UNCONFIGURED~
None Enumeration Type red) 5, ILLEGAL~6 None
Character String
u Switchtec Power
Systems Co.,LTD.),
TycoElectronics(Tyc
o Electronics
(Shang hai)
Co.,Ltd.),
ARTESYN(Artesyn
Technologies
Co.,Ltd.),
CHROMA(Chroma
Electronics),
LuckyValley(Lucky
Valley Technology
Co.,Ltd),
ACBEL(Acbel
Electronic Co.,Ltd),
Zippy(Zippy
Technology corp.),
GuoyaoElectronics( Huawei~0,
Shenzhen Guoyao Emerson~1,
Electronics Holdluck-ZYT~2,
Technology Power-One~3,
Co.,LTD.), Kehua~4,
DPC(Beijing DeltaElectronics~5,
Dynamic Power EltekEnergy~6,
Science & Switchtec~7,
Technology TycoElectronics~8,
Co.,Ltd.), ARTESYN~9,
GoldPower(Shenzh CHROMA~10,
en Gold Power Elec LuckyValley~11,
Tech Co.,Ltd), ACBEL~12,
SungrowPowerSup Zippy~13,
ply(Sungrow Power GuoyaoElectronics
Supply Co.,Ltd), ~14, DPC~15,
Ecom(Beijing Ecom GoldPower~16,
Communications SungrowPowerSup
None Enumeration Type Technology Co. Ltd) ply~17, Ecom~18 None

Character String
Character String
Character String
Character String
Character String
Character String
Character String
Character String
CCU(CCU), MRXU~22,
OWN), AARU~43,
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
CABINET(CABINE
T),
SUBRACK(SUBRA
CK), CABINET~0,
Character String
Character String
Character String
Environment Character String

Monitoring Type 0~50 characters N/A None
Environment
Monitoring Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
0~1,7~8,11~12,14~
None Interval Type 15,40~254 N/A None

Environment
Monitoring Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Environment
BOOL(Digital Port),
Environment VALUE(Analog
Monitoring Enumeration Type Port) BOOL~0, VALUE~1 None
HIGH(High
Environment Voltage), LOW(Low
Monitoring Enumeration Type Voltage) HIGH~0, LOW~1 None
Environment
Monitoring Interval Type -99999~999999 N/A 0.01
Environment
VOLTAGE(Voltage
Type),
Environment CURRENT(Current VOLTAGE~0,
Monitoring Enumeration Type Type) CURRENT~1 None
Environment
Environment
Environment
Monitoring Interval Type 0~999999 N/A 0.01V or 0.01mA
Environment
Monitoring Interval Type 0~999999 N/A 0.01V or 0.01mA
ALL(All Type),
Security Socket SSL(Only SSL
Layer Enumeration Type Connection) ALL~0, SSL~1 None
NONE(Verify
Security Socket None), PEER(Verify
Layer Enumeration Type Peer Certificate) NONE~0, PEER~1 None
COMPATIBLE_MO
DE(Compatible COMPATIBLE_MO
Mode), DE~0,
Security Socket ENHANCED_MOD ENHANCED_MOD
Layer Enumeration Type E(Enhanced Mode) E~1 None
COMPATIBLE(Com
patible),
Security Socket HTTPS_ONLY(Http
Layer s_only), COMPATIBLE~0,
Local Maintenance LOGIN_HTTPS_O HTTPS_ONLY~1,
of the LMT NLY(Login_https_o LOGIN_HTTPS_O
Enumeration Type nly) NLY~2 None

GBTS(GBTS),
NodeB(NodeB), GBTS~1, NodeB~2,
None Enumeration Type eNodeB(eNodeB) eNodeB~3 None
Character String
AVAILABLE(Availab
le),
UNAVAILABLE(Una AVAILABLE~0,
None Enumeration Type vailable) UNAVAILABLE~1 None
Character String
None Enumeration Type TRUNK(TRUNK) TRUNK~0 None

Character String
BLOCKED(Blocked
),
5000(5000),
4800(4800),
4600(4600),
4400(4400), 5000~0, 4800~1,
4200(4200), 4600~2, 4400~3,
3800(3800), 4200~4, 3800~5,
None Enumeration Type 4000(4000) 4000~6 None
None Interval Type -250~250 N/A 100KHz

LO(LTE_FDD),
GO(GSM_ONLY),
GL(GSM_LTE),
UO(UMTS_ONLY), LO~8, GO~64,
UL(UMTS_LTE), GL~72, UO~128,
None Enumeration Type GU(GSM_UMTS) UL~136, GU~192 None

None Interval Type 0~65535 N/A 0.1degree
Character String
CONNECTHEAD(A
ccess from chain
head or ring head),
CONNECTTAIL(Ac
cess from ring tail),
CONNECTBOTH(A
ccess from both CONNECTHEAD~0
ends of the ring), , CONNECTTAIL~1,
SEPERATEBYBRE CONNECTBOTH~2
AK(Seperated by ,
break points), SEPERATEBYBRE
LINKDOWN(Link AK~3,
None Enumeration Type down) LINKDOWN~4 None
Character String
Character String
Character String
Character String
Character String
Character String
Character String
Character String
CCU(CCU), MRXU~22,
OWN), AARU~43,
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
CABINET(CABINE
T),
SUBRACK(SUBRA
CK), CABINET~0,
Character String
Character String
Character String
BLOCKED(Blocked
),

None Interval Type 14~100 N/A 0.1

TRUNK(TRUNK),
BRANCH(BRANCH TRUNK~0,
None Enumeration Type ) BRANCH~1 None
TDL(LTE_TDD),
TL(TDS_TDL),
LO(LTE_FDD),
LFTD(LTE_FDD_T
DD),
WL(WiMAX_LTE),
CL(CDMA_LTE),
GO(GSM_ONLY),
GL(GSM_LTE),
UO(UMTS_ONLY), TDL~4, TL~6,
UL(UMTS_LTE), LO~8, LFTD~12,
ULFTD(UMTS_LTE WL~20, CL~40,
_FDD_TDD), GO~64, GL~72,
CU(CDMA_UMTS), UO~128, UL~136,
GU(GSM_UMTS), ULFTD~140,
GUL(GSM_UMTS_ CU~160, GU~192,
None Enumeration Type LTE) GUL~200 None
Character String
Character String
None Interval Type 0~500 N/A 0.1dBm
Character String
TDS(TDS),
LO_TD(LTE_TDD),
TL(TL), LO(LO),
LFTD(LTE_FDD_T
DD), WO(WO),
WL(WL), C0(C0),
CL(CL), CW(CW),
CWL(CWL), TDS~2, LO_TD~4,
GO(GO), GL(GL), TL~6, LO~8,
GW(GW), LFTD~12, WO~16,
GWL(GWL), WL~20, C0~32,
GC(GC), CL~40, CW~48,
GCL(GCL), CWL~56, GO~64,
GCW(GCW), GL~72, GW~80,
GCWL(GCWL), GWL~88, GC~96,
UO(UO), UL(UL), GCL~104,
ULFTD(UMTS_LTE GCW~112,
_FDD_TDD), GCWL~120,
UW(UW), UO~128, UL~136,
UWL(UWL), ULFTD~140,
UC(UC), UW~144,
UCL(UCL), UWL~152,
UCW(UCW), UC~160, UCL~168,
UCWL(UCWL), UCW~176,
GU(GU), UCWL~184,
GUL(GUL), GU~192, GUL~200,
GUW(GUW), GUW~208,
GUWL(GUWL), GUWL~216,
GUC(GUC), GUC~224,
GUCL(GUCL), GUCL~232,
GUCW(GUCW), GUCW~240,
GUCWL(GUCWL), GUCWL~248,
None Enumeration Type NULL(Invalid) NULL~255 None
CONNECTHEAD(A
ccess from chain
head or ring head),
CONNECTTAIL(Ac
CONNECTBOTH(A
AK(Seperated by ,
LINKDOWN(Link AK~3,

None Interval Type 0~10 N/A dB
SUPPORT(UL
Feature
Supported),
NOTSUPPORT(UL
Feature not SUPPORT~0,
None Enumeration Type Supported) NOTSUPPORT~1 None
5000(5000),
4800(4800),
4600(4600),
4400(4400), 5000~0, 4800~1,
4200(4200), 4600~2, 4400~3,
3800(3800), 4200~4, 3800~5,
None Enumeration Type 4000(4000) 4000~6 kHz
Enable(Enable), Enable~0,
Disable(Disable), Disable~1,
Character String

Character String

4~5,60~254,42949
INTRA_SYS_INTE
RCONN(Intra
interconnection), INTRA_SYS_INTE
OUTER_SYS_INTE RCONN~0,
RCONN(Outer OUTER_SYS_INTE
interconnection), RCONN~1,
Adaptive Power
Consumption Enumeration Type OFF(OFF), ON(ON) OFF~0, ON~1 None
Character String
Character String
Character String
Character String
Character String
Character String
Character String
CCU(CCU), MRXU~22,
OWN), AARU~43,
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
CABINET(CABINE
T),
SUBRACK(SUBRA
CK), CABINET~0,
Character String
Character String
Character String

MRFU(MRFU), MRFU~16,
MTXU(MTXU), MTXU~23,
GRFU(GRFU), GRFU~4112,
DRFU(DRFU), DRFU~4368,
WRFU(WRFU), WRFU~8208,
LRFU(LRFU), LRFU~12304,
BRFU(BRFU), BRFU~16400,
None Enumeration Type CRFU(CRFU) CRFU~20496 None
BLOCKED(Blocked
),
Character String
Character String
Character String
Character String
Character String
Character String
Character String
CCU(CCU), MRXU~22,
OWN), AARU~43,
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
CABINET(CABINE
T),
SUBRACK(SUBRA
CK), CABINET~0,

TRUNK(TRUNK),
TDL(LTE_TDD),
TL(TDS_TDL),
LO(LTE_FDD),
LFTD(LTE_FDD_T
DD),
WL(WiMAX_LTE),
CL(CDMA_LTE),
GO(GSM_ONLY),
GL(GSM_LTE),
Character String
Character String
Character String
TDS(TDS),
LO_TD(LTE_TDD),
TL(TL), LO(LO),
LFTD(LTE_FDD_T
DD), WO(WO),
WL(WL), C0(C0),
CL(CL), CW(CW),
GWL(GWL), WL~20, C0~32,
GC(GC), CL~40, CW~48,
UW(UW), UO~128, UL~136,
UC(UC), UW~144,
UCL(UCL), UWL~152,
GU(GU), UCWL~184,
GUW(GUW), GUW~208,
GUC(GUC), GUC~224,
CONNECTHEAD(A
ccess from chain
head or ring head),
CONNECTTAIL(Ac
CONNECTBOTH(A
AK(Seperated by ,
LINKDOWN(Link AK~3,

SUPPORT(UL
Feature
Supported),
NOTSUPPORT(UL
5000(5000),
4800(4800),
4600(4600),
4400(4400), 5000~0, 4800~1,
4200(4200), 4600~2, 4400~3,
3800(3800), 4200~4, 3800~5,
Character String

Character String

4~5,60~254,42949
INTRA_SYS_INTE
RCONN(Intra
Character String
Character String
Character String
Adaptive Power

Character String
MRRU(MRRU), MRRU~15,
MRXU(MRXU), MRXU~22,
PRRU(PRRU), PRRU~271,
MPRU(MPRU), MPRU~527,
MPMU(MPMU), MPMU~783,
MPRF(MPRF), MPRF~1039,
AIRU(AIRU), AIRU~1295,
GRRU(GRRU), GRRU~4111,
None Enumeration Type LRRU(LRRU) LRRU~12303 None

BLOCKED(Blocked
),
Character String
Character String
Character String
Character String
Character String
Character String
Character String
CCU(CCU), MRXU~22,
OWN), AARU~43,
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
-
2147483648~2147
483647(metric
system);-
2147483648~2147 degree
CABINET(CABINE
T),
SUBRACK(SUBRA
CK), CABINET~0,

TRUNK(TRUNK),
TDL(LTE_TDD),
TL(TDS_TDL),
LO(LTE_FDD),
LFTD(LTE_FDD_T
DD),
WL(WiMAX_LTE),
CL(CDMA_LTE),
GO(GSM_ONLY),
GL(GSM_LTE),

Character String
Character String
Character String
TDS(TDS),
LO_TD(LTE_TDD),
TL(TL), LO(LO),
LFTD(LTE_FDD_T
DD), WO(WO),
WL(WL), C0(C0),
CL(CL), CW(CW),
GWL(GWL), WL~20, C0~32,
GC(GC), CL~40, CW~48,
UW(UW), UO~128, UL~136,
UC(UC), UW~144,
UCL(UCL), UWL~152,
GU(GU), UCWL~184,
GUW(GUW), GUW~208,
GUC(GUC), GUC~224,
CONNECTHEAD(A
ccess from chain
head or ring head),
CONNECTTAIL(Ac
CONNECTBOTH(A
AK(Seperated by ,
LINKDOWN(Link AK~3,

SUPPORT(UL
Feature
Supported),
NOTSUPPORT(UL
5000(5000),
4800(4800),
4600(4600),
4400(4400), 5000~0, 4800~1,
4200(4200), 4600~2, 4400~3,
3800(3800), 4200~4, 3800~5,
Character String

Character String

4~5,60~254,42949
INTRA_SYS_INTE
RCONN(Intra
Character String
Character String
Character String
Adaptive Power

CHAIN(CHAIN),
RING(RING),
LOADBALANCE(L CHAIN~0, RING~1,
None Enumeration Type OADBALANCE) LOADBALANCE~2 None
COLD(COLD),
None Enumeration Type HOT(HOT) COLD~0, HOT~1 None
LOCALPORT(local
port),
PEERPORT(peer LOCALPORT~0,
None Enumeration Type port) PEERPORT~1 None
1.25G(1.25),
2.5G(2.5),
4.9G(4.9),
6.1G(6.1), 1.25G~0, 2.5G~1,
9.8G(9.8), 4.9G~3, 6.1G~4,
None Enumeration Type AUTO(Auto) 9.8G~5, AUTO~255 Gbit/s

Remote Electrical
Remote Electrical
Remote Electrical
Tilt Control Interval Type 0~60 N/A 0.5dB
None Interval Type -130~130 N/A 0.1dB

None Interval Type 0~4294967295 N/A 0.1MHz

Character String
None Type 0~31 characters N/A MHz
Character String

ON(ON),

None Interval Type 0,500~65500 N/A 10mW

None Interval Type 0,500~65500 N/A 10mW
Character String
Character String

123~5999,6100~65
IPV4(IPv4),
None Enumeration Type IPV6(IPv6) IPV4~0, IPV6~1 None

PLAIN(Plain),
DES_S(DES_S), PLAIN~0,
DES_N(DES_N), DES_S~1,
DES_A(DES_A), DES_N~2,
None Enumeration Type MD5(MD5) DES_A~3, MD5~4 None
None Password Type 1~16 characters N/A None
Slaver(Slave),
None Enumeration Type Master(Master) Slaver~0, Master~1 None
5:00), 0930~10, GMT-
GMT+0530(GMT+0 0900~12, GMT-
5:30), 0800~16, GMT-
GMT+0545(GMT+0 0700~20, GMT-
5:45), 0600~24, GMT-
GMT+0600(GMT+0 0500~28, GMT-
6:00), 0430~30, GMT-
GMT+0630(GMT+0 0400~32, GMT-
6:30), 0330~34, GMT-
GMT+0700(GMT+0 0300~36, GMT-
7:00), 0200~40, GMT-
GMT+0800(GMT+0 0100~44, GMT~48,
8:00), GMT+0100~52,
GMT+0845(GMT+0 GMT+0200~56,
8:45), GMT+0300~60,
GMT+0900(GMT+0 GMT+0330~62,
9:00), GMT+0400~64,
GMT+0930(GMT+0 GMT+0430~66,
9:30), GMT+0500~68,
GMT+1000(GMT+1 GMT+0530~70,
0:00), GMT+0545~71,
GMT+1030(GMT+1 GMT+0600~72,
0:30), GMT+0630~74,
GMT+1100(GMT+1 GMT+0700~76,
1:00), GMT+0800~80,
GMT+1130(GMT+1 GMT+0845~83,
1:30), GMT+0900~84,
GMT+1200(GMT+1 GMT+0930~86,
2:00), GMT+1000~88,
GMT+1245(GMT+1 GMT+1030~90,
2:45), GMT+1100~92,
GMT+1300(GMT+1 GMT+1130~94,
3:00), GMT+1200~96,
GMT+1400(GMT+1 GMT+1245~99,
4:00), GMT+1300~100,
CUSTOM(Custom GMT+1400~104,
None Enumeration Type time zone) CUSTOM~200 None

DATE(Date mode),
WEEK(Week
mode),
DATEWEEK(Date DATE~0, WEEK~1,
None Enumeration Type and week mode) DATEWEEK~2 None
JAN(January),
FEB(February),
MAR(March),
APR(April),
MAY(May),
JUN(June),
JUL(July), JAN~1, FEB~2,
AUG(August), MAR~3, APR~4,
SEP(September), MAY~5, JUN~6,
OCT(October), JUL~7, AUG~8,
NOV(November), SEP~9, OCT~10,
None Enumeration Type DEC(December) NOV~11, DEC~12 None
LAST(Last),
FIRST(First), LAST~0, FIRST~1,
SECOND(Second), SECOND~2,
THIRD(Third), THIRD~3,
None Enumeration Type FOURTH(Fourth) FOURTH~4 None
MON(Monday),
TUE(Tuesday),
WED(Wednesday),
THU(Thursday), MON~1, TUE~2,
FRI(Friday), WED~3, THU~4,
SAT(Saturday), FRI~5, SAT~6,
None Enumeration Type SUN(Sunday) SUN~7 None
None Compound Type 00:00:00~23:59:59 N/A None

DATE(Date mode),
WEEK(Week
mode),
DATEWEEK(Date DATE~0, WEEK~1,
None Enumeration Type and week mode) DATEWEEK~2 None
JAN(January),
FEB(February),
MAR(March),
APR(April),
MAY(May),
JUN(June),
JUL(July), JAN~1, FEB~2,
AUG(August), MAR~3, APR~4,
SEP(September), MAY~5, JUN~6,
OCT(October), JUL~7, AUG~8,
NOV(November), SEP~9, OCT~10,
None Enumeration Type DEC(December) NOV~11, DEC~12 None
LAST(Last),
FIRST(First), LAST~0, FIRST~1,
SECOND(Second), SECOND~2,
THIRD(Third), THIRD~3,
None Enumeration Type FOURTH(Fourth) FOURTH~4 None
MON(Monday),
TUE(Tuesday),
WED(Wednesday),
THU(Thursday), MON~1, TUE~2,
FRI(Friday), WED~3, THU~4,
SAT(Saturday), FRI~5, SAT~6,
None Enumeration Type SUN(Sunday) SUN~7 None

None Interval Type -120~120 N/A min
None Interval Type -720~840 N/A min
2000-01-01~2033-
None Compound Type 12-31 N/A None

NTP(NTP),
GPS(GPS), NTP~0, GPS~1,
NONE(None), NONE~2,
None Enumeration Type SYSCLK(SYSCLK) SYSCLK~4 None
Character String
Auto(Auto),
Plaintext(Plaintext), Auto~0,
Security Socket Encrypted(SSL Plaintext~1,
Layer Enumeration Type Encrypted) Encrypted~2 None
Security Socket
Layer Enumeration Type No(No), Yes(Yes) No~0, Yes~1 None
Security Socket
Layer Enumeration Type No(No), Yes(Yes) No~0, Yes~1 None

Extended-QCI Interval Type 0~5 N/A None
Service based inter-

RAT handover to
UTRAN
RAT handover to
GERAN Interval Type 0~9 N/A None
Service Based
Inter-frequency
Handover Interval Type 0~9 N/A None
EUTRAN_TDD, EUTRAN_TDD~1,
Coverage Based EUTRAN_FDD, EUTRAN_FDD~2,
Inter-frequency Enumeration Type EUTRAN EUTRAN~3 None
EUTRAN_TDD~1,
EUTRAN_TDD, EUTRAN_FDD~2,
Coverage Based EUTRAN_FDD, EUTRAN~3,
Inter-frequency Enumeration Type EUTRAN, NULL NULL~4 None
Coverage Based
Inter-frequency Interval Type -100,-20~20 N/A dBm
Coverage Based
Inter-frequency
Handover Interval Type -100,-20~20 N/A dBm
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN Interval Type -100,-20~20 N/A dBm
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN Interval Type -100,-20~20 N/A dBm
Multi Operators
SPID Policy Interval Type 0~5 N/A None
Intra-LTE Load
Balancing
Inter-RAT Load
Sharing to UTRAN
Inter-RAT Load
Sharing to GERAN
Flexible User
Steering
Camp & Handover
Based on SPID
UL Pre-allocation
Based on SPID
Multi Operators
Intra-LTE Load
Balancing
Inter-RAT Load
Sharing to UTRAN
Inter-RAT Load NOT_CFG(NOT_C NOT_CFG~0,
Sharing to GERAN Enumeration Type FG), CFG(CFG) CFG~1 None
Intra-LTE Load
Balancing
Inter-RAT Load
Sharing to UTRAN
Inter-RAT Load
Sharing to GERAN
Flexible User
Steering
Camp & Handover
Based on SPID
UL Pre-allocation
Based on SPID
Multi Operators

QCI1(QCI 1),
QCI2(QCI 2),
QCI3(QCI 3),
QCI4(QCI 4),
QCI5(QCI 5), QCI1~1, QCI2~2,
None Enumeration Type QCI9(QCI 9) QCI9~9 None

RAT handover to
UTRAN
RAT handover to
Service Based
Inter-frequency
CS Fallback to
UTRAN
CS Fallback to
GERAN
Flash CS Fallback
to UTRAN
Flash CS Fallback
to GERAN
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
CDMA2000 1xRTT Interval Type 0~5 N/A None
CS Fallback to
UTRAN
CS Fallback to
GERAN
CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
Flash CS Fallback
to UTRAN
Flash CS Fallback
to GERAN
Enhanced CS
Fallback to
CDMA2000 1xRTT
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based UTRAN~0,
Inter-RAT handover UTRAN, GERAN, GERAN~1,
to GERAN Enumeration Type CDMA2000 CDMA2000~2 None
CS Fallback to
UTRAN
CS Fallback to
GERAN
CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
Flash CS Fallback
to UTRAN
Flash CS Fallback
to GERAN
Enhanced CS
Fallback to
CDMA2000 1xRTT
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN UTRAN~0,
Distance based GERAN~1,
Inter-RAT handover UTRAN, GERAN, CDMA2000~2,
to GERAN Enumeration Type CDMA2000, NULL NULL~3 None
CS Fallback to
UTRAN
CS Fallback to
GERAN
CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
Flash CS Fallback
to UTRAN
Flash CS Fallback
to GERAN
Enhanced CS
Fallback to
CDMA2000 1xRTT
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN UTRAN~0,
Distance based GERAN~1,
Inter-RAT handover UTRAN, GERAN, CDMA2000~2,
to GERAN Enumeration Type CDMA2000, NULL NULL~3 None
CS Fallback to
UTRAN Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
CS Fallback to
GERAN Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
CS Fallback to
CDMA2000 1xRTT Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
CS Fallback to
CDMA2000 1xRTT
CS Fallback
Steering to UTRAN
CS Fallback
Steering to GERAN
Enhanced CS UTRAN~0,
Fallback to UTRAN, GERAN, GERAN~1,
CDMA2000 1xRTT Enumeration Type CDMA2000 CDMA2000~2 None
CS Fallback to
CDMA2000 1xRTT
CS Fallback
Steering to UTRAN
CS Fallback
Steering to GERAN UTRAN~0,
Enhanced CS GERAN~1,
Fallback to UTRAN, GERAN, CDMA2000~2,
CDMA2000 1xRTT Enumeration Type CDMA2000, NULL NULL~3 None
CS Fallback to
CDMA2000 1xRTT
CS Fallback
Steering to UTRAN
CS Fallback
Steering to GERAN UTRAN~0,
Enhanced CS GERAN~1,
Fallback to UTRAN, GERAN, CDMA2000~2,
CDMA2000 1xRTT Enumeration Type CDMA2000, NULL NULL~3 None
CS Fallback to
UTRAN
CS Fallback to
GERAN
CS Fallback
Steering to UTRAN REDIRECTION~0,
CS Fallback REDIRECTION, CCO_HO~1,
Steering to GERAN Bit Field Type CCO_HO, PS_HO PS_HO~2 None
CS Fallback
Steering to UTRAN REDIRECTION~0,
CS Fallback REDIRECTION, CCO_HO~1,
Steering to GERAN Bit Field Type CCO_HO, PS_HO PS_HO~2 None

Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
CS Fallback to Character String
UTRAN Type 3 characters N/A None
Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
CS Fallback to Character String
UTRAN Type 2~3 characters N/A None
Camp & Handover

Based on SPID Interval Type 0~255 N/A None
Camp & Handover
Based on SPID
Enhanced CS EUTRAN~0,
Fallback to UTRAN~1,
CDMA2000 1xRTT GERAN~2,
PS Inter-RAT EUTRAN, UTRAN, CDMA20001XRTT~
Mobility between E- GERAN, 3,
UTRAN and CDMA20001XRTT, CDMA2000HRPD~
CDMA2000 Enumeration Type CDMA2000HRPD 4 None
Camp & Handover 0~45589,54436~65

Based on SPID Interval Type 535 N/A None
Camp & Handover

Camp & Handover GSM_dcs1800, GSM_dcs1800~0,

Based on SPID Enumeration Type GSM_pcs1900 GSM_pcs1900~1 None
Service Based
Inter-frequency
Service Based
Inter-frequency
Service Based
Inter-frequency NO_HO, NO_HO~0,
Handover Enumeration Type PERMIT_HO PERMIT_HO~1 None
Service Based
Inter-frequency 0~45589,64436~65
Handover Interval Type 535 N/A None

RAT handover to
UTRAN
RAT handover to

RAT handover to
UTRAN
RAT handover to

RAT handover to
UTRAN
Service based inter- NO_HO, NO_HO~0,
RAT handover to PERMIT_HO, PERMIT_HO~1,
GERAN Enumeration Type MUST_HO MUST_HO~2 None
Camp & Handover
Based on SPID
UL Pre-allocation
FALSE(FALSE),
DRX Enumeration Type TRUE(TRUE) FALSE~0, TRUE~1 None
Camp & Handover NOT_CFG(NOT_C NOT_CFG~0,

Based on SPID Enumeration Type FG), CFG(CFG) CFG~1 None
Camp & Handover

UL Pre-allocation FALSE(FALSE),
Based on SPID Enumeration Type TRUE(TRUE) FALSE~0, TRUE~1 None
Camp & Handover
Based on SPID
Intra-LTE Load FALSE(FALSE),
Balancing Enumeration Type TRUE(TRUE) FALSE~0, TRUE~1 None
Camp & Handover

Based on SPID
Inter-RAT Load
Sharing to UTRAN
Inter-RAT Load FALSE(FALSE),
Sharing to GERAN Enumeration Type TRUE(TRUE) FALSE~0, TRUE~1 None
Camp & Handover FALSE(FALSE),

Based on SPID Enumeration Type TRUE(TRUE) FALSE~0, TRUE~1 None

arameter0_bit20), 4~13,
RsvdSwPara0_bit2 RsvdSwPara0_bit1
1(ReservedSwitchP 5~14,
arameter0_bit21), RsvdSwPara0_bit1
RsvdSwPara0_bit2 6~15,
2(ReservedSwitchP RsvdSwPara0_bit1
None Bit Field Type arameter0_bit32) 2~31 None










Character String
Character String
Character String
Integrity Protection Interval Type 0,10~600 N/A s
Integrity Protection Interval Type 0,128~4294967295 N/A None

Integrity Protection Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
NULL(NULL
Algorithm),
Snow3G(SNOW 3G
Algorithm),
Encryption: AES AES(AES
Encryption: SNOW Algorithm), NULL~0,
3G ZUC(ZUC Snow3G~1, AES~2,
Encryption: ZUC Enumeration Type Algorithm) ZUC~3 None
NULL(NULL
Algorithm),
Snow3G(SNOW 3G
Algorithm),
NULL(NULL
Algorithm),
Snow3G(SNOW 3G
Algorithm),
NULL(NULL
Algorithm),
Snow3G(SNOW 3G
Algorithm),

Enhanced CS
Fallback to
CDMA2000 1xRTT Interval Type 1~65535 N/A ms
Enhanced CS
Fallback to
Enhanced CS
Fallback to
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000 Interval Type 1~65535 N/A ms
PS Inter-RAT
Mobility between E-
UTRAN and
PS Inter-RAT
Mobility between E-
UTRAN and


NULL(NULL
Algorithm),
Snow3G(SNOW 3G
Algorithm),
AES(AES
Algorithm), NULL~0,
ZUC(ZUC Snow3G~1, AES~2,
Integrity Protection Enumeration Type Algorithm) ZUC~3 None
NULL(NULL
Algorithm),
Snow3G(SNOW 3G
Algorithm),
AES(AES
Algorithm), NULL~0,
NULL(NULL
Algorithm),
Snow3G(SNOW 3G
Algorithm),
AES(AES
Algorithm), NULL~0,
Disable(Disable
NULL Algorithm),
Enable(Enable Disable~0,
Integrity Protection Enumeration Type NULL Algorithm) Enable~1 None
RObust Header
Compression
(ROHC) Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
U_MODE(Unidirecti
onal Mode),
O_MODE(Bi-
directional
Optimistic Mode),
RObust Header R_MODE(Bi- U_MODE~1,
Compression Directional Reliable O_MODE~2,
(ROHC) Enumeration Type Mode) R_MODE~3 None
Profile0x0001(Profil
e0x0001),
Profile0x0002(Profil
e0x0002),
Profile0x0003(Profil Profile0x0001~0,
RObust Header e0x0003), Profile0x0002~1,
Compression Profile0x0004(Profil Profile0x0003~2,
(ROHC) Bit Field Type e0x0004) Profile0x0004~3 None
RRC Connection
min5(5), min10(10),
min20(20), min5~0, min10~1,
min30(30), min20~2, min30~3,
min60(60), min60~4,
min120(120), min120~5,
None Enumeration Type min180(180) min180~6 min
ms50(50),
ms100(100), ms50~0, ms100~1,
ms150(150), ms150~2,
ms200(200), ms200~3,
ms500(500), ms500~4,
ms1000(1000), ms1000~5,
None Enumeration Type ms2000(2000) ms2000~6 ms
ms100(100), ms100~0,
ms200(200), ms200~1,
ms500(500), ms500~2,
ms1000(1000), ms1000~3,
ms2000(2000), ms2000~4,
ms4000(4000), ms4000~5,
None Enumeration Type ms8000(8000) ms8000~6 ms
min5(5), min10(10),
min20(20), min5~0, min10~1,
min30(30), min20~2, min30~3,
min60(60), min60~4,
min120(120), min120~5,
None Enumeration Type min180(180) min180~6 min
RRC Connection
RRC Connection
RRC Connection
Dynamic DRX
High-Mobility-
Triggered Idle Mode Interval Type 10~3600 N/A s
Dynamic DRX
High-Mobility-
Triggered Idle Mode Interval Type 5~3600 N/A s
IPv4(IPv4 Address),
None Enumeration Type IPv6(IPv6 Address) IPv4~0, IPv6~1 None
Character String
Self-configuration Type 3 characters N/A None
Character String

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support of UE
Category 6 Interval Type -140~-43 N/A dBm
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support of UE
Category 6 Interval Type -140~-43 N/A dBm
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support of UE
Category 6 Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support of UE
Category 6 Interval Type 1~30 N/A KB
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support of UE
Category 6 Interval Type 1~10 N/A KB
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support of UE
Category 6 Interval Type 10~300 N/A ms
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support of UE
Category 6 Interval Type 10~1000 N/A Kbit/s
DL CoMP
Introduction
Package
Intra-eNodeB DL
CoMP in DCS
Mode
Intra-eNodeB DL
CoMP in Adaptive
Mode Interval Type -30~30 N/A 0.5dB

Dynamic Downlink
Power Allocation Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
DB_6_P_A(-6 dB),
DB_4DOT77_P_A(-
4.77 dB), DB_6_P_A~0,
DB_3_P_A(-3 dB), DB_4DOT77_P_A~
DB_1DOT77_P_A(- 1, DB_3_P_A~2,
1.77 dB), DB_1DOT77_P_A~
DB0_P_A(0 dB), 3, DB0_P_A~4,
DB1_P_A(1 dB), DB1_P_A~5,
Dynamic Downlink DB2_P_A(2 dB), DB2_P_A~6,
Power Allocation Enumeration Type DB3_P_A(3 dB) DB3_P_A~7 dB

DRX Interval Type 0~1000 N/A per mill


DRX Interval Type 2~300 N/A 20ms
DRX Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
DRX Interval Type 2~300 N/A 20ms


SF10(10
subframes),
SF20(20
subframes),
SF32(32
subframes),
SF40(40
subframes),
SF64(64
subframes),
SF80(80
subframes),
SF128(128
subframes),
SF160(160
subframes),
SF256(256
subframes),
SF320(320
subframes), SF10~0, SF20~1,
SF512(512 SF32~2, SF40~3,
SF640(640 SF128~6,
subframes), SF160~7,
SF1024(1024 SF256~8,
SF1280(1280 SF512~10,
SF2048(2048 SF1024~12,
Dynamic DRX SF2560(2560 SF2048~14,
DRX Enumeration Type subframes) SF2560~15 subframe
PSF1(1 PDCCH
subframe), PSF2(2
PDCCH
subframes), PSF3(3
PDCCH
subframes), PSF4(4
PDCCH
subframes), PSF5(5
PDCCH
subframes), PSF6(6
PDCCH
subframes), PSF8(8
PDCCH
subframes),
PSF10(10 PDCCH
subframes),
PSF20(20 PDCCH
subframes),
PSF30(30 PDCCH
subframes),
PSF40(40 PDCCH
subframes), PSF1~0, PSF2~1,
PSF50(50 PDCCH PSF3~2, PSF4~3,
subframes), PSF20~8,
PSF80(80 PDCCH PSF30~9,
PSF100(100 PSF50~11,
PDCCH PSF60~12,
High-Mobility- PSF200(200 PSF100~14,
Triggered Idle Mode Enumeration Type PDCCH subframes) PSF200~15 subframe
PSF200(200
PDCCH
subframes),
PSF300(300
PDCCH
subframes),
PSF500(500
PDCCH
subframes),
PSF750(750
PDCCH
subframes),
PSF1280(1280
PDCCH PSF200~0,
PSF1920(1920 PSF500~2,
PDCCH PSF750~3,
PSF2560(2560 PSF1920~5,
Dynamic DRX Enumeration Type PDCCH subframes) PSF2560~6 subframe

Coverage Based
Inter-frequency
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000 Interval Type -140~-43 N/A dBm
Coverage Based
Inter-frequency
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000 Interval Type -40~-6 N/A 0.5dB

Intra-eNodeB UL
CoMP Interval Type -30~30 N/A 0.5dB
UU_DISABLE(Disa
ble),
Uplink Power UU_ENABLE(Enabl UU_DISABLE~0,
Control Enumeration Type e) UU_ENABLE~1 None
-105,-90,-75,-60,-
45,-30,-
Uplink Power 15,0,15,30,45,60,75
Control Interval Type ,90,105,120 N/A 0.1dB
-30,-20,-
10,0,10,20,30,40,50
Uplink Power ,60,70,80,90,100,11
Control Interval Type 0,120 N/A 0.1dB
ILTER_COEFF),
UU_FC3_FILTER_
COEFF(UU_FC3_F
ILTER_COEFF),
UU_FC4_FILTER_
COEFF(UU_FC4_F
ILTER_COEFF),
UU_FC5_FILTER_ UU_FC0_FILTER_
COEFF(UU_FC5_F COEFF~0,
ILTER_COEFF), UU_FC1_FILTER_
UU_FC6_FILTER_ COEFF~1,
COEFF(UU_FC6_F UU_FC2_FILTER_
ILTER_COEFF), COEFF~2,
COEFF(UU_FC8_F UU_FC5_FILTER_
ILTER_COEFF), COEFF~5,
COEFF(UU_FC11_ UU_FC8_FILTER_
FILTER_COEFF), COEFF~8,
COEFF(UU_FC13_ COEFF~9,
FILTER_COEFF), UU_FC11_FILTER_
COEFF(UU_FC15_ UU_FC13_FILTER_
FILTER_COEFF), COEFF~11,
COEFF(UU_FC17_ COEFF~12,
FILTER_COEFF), UU_FC17_FILTER_
Uplink Power COEFF(UU_FC19_ UU_FC19_FILTER_
Control Enumeration Type FILTER_COEFF) COEFF~14 None
Distance based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to GERAN
Distance Based EUTRAN~0,
Inter-frequency EUTRAN, GERAN, GERAN~1,
Handover Bit Field Type UTRAN UTRAN~2 None
Distance Based
Inter-frequency
Handover
Distance based
Inter-RAT handover
to UTRAN
Distance based 1~1000(metric
Inter-RAT handover system);3~3281(im
to GERAN Interval Type perial system) N/A 100m(100ft)
DRX Interval Type 0~9 N/A None

PSF1(1 PDCCH
subframe), PSF2(2
PDCCH
subframes), PSF3(3
PDCCH
subframes), PSF4(4
PDCCH
subframes), PSF5(5
PDCCH
subframes), PSF6(6
PDCCH
subframes), PSF8(8
PDCCH
subframes),
PSF10(10 PDCCH
subframes),
PSF20(20 PDCCH
subframes),
PSF30(30 PDCCH
subframes),
PSF40(40 PDCCH
PSF100(100 PSF50~11,
PDCCH PSF60~12,
PSF200(200 PSF100~14,
DRX Enumeration Type PDCCH subframes) PSF200~15 subframe
PSF10(10 PDCCH
subframes),
PSF20(20 PDCCH
subframes),
PSF30(30 PDCCH
subframes),
PSF40(40 PDCCH
subframes),
PSF50(50 PDCCH
subframes),
PSF60(60 PDCCH
subframes),
PSF80(80 PDCCH
subframes),
PSF100(100
PDCCH
subframes),
PSF200(200
PDCCH
PSF300(300 PSF3~2, PSF4~3,
PDCCH PSF5~4, PSF6~5,
PSF500(500 PSF20~8,
PDCCH PSF30~9,
PSF750(750 PSF50~11,
PDCCH PSF60~12,
PSF1280(1280 PSF100~14,
PDCCH PSF200~15,
PSF1920(1920 PSF500~17,
PDCCH PSF750~18,
PSF2560(2560 PSF1920~20,
PSF1(1 PDCCH
subframes), PSF2(2
PDCCH
subframes), PSF4(4
PDCCH
subframes), PSF6(6
PDCCH
subframes), PSF8(8
PDCCH
subframes),
PSF16(16 PDCCH
DRX Enumeration Type subframes) PSF33~7 subframe
SF10(10
subframes),
SF20(20
subframes),
SF32(32
subframes),
SF40(40
subframes),
SF64(64
subframes),
SF80(80
subframes),
SF128(128
subframes),
SF160(160
subframes),
SF256(256
subframes),
SF320(320
SF512(512 SF32~2, SF40~3,
SF640(640 SF128~6,
SF1024(1024 SF256~8,
SF1280(1280 SF512~10,
SF2048(2048 SF1024~12,
SF2560(2560 SF2048~14,
UU_DISABLE(Disa
ble),
UU_ENABLE(Enabl UU_DISABLE~0,
DRX Enumeration Type e) UU_ENABLE~1 None
SF2(2 subframes),
SF5(5 subframes),
SF8(8 subframes),
SF10(10
subframes),
SF16(16
subframes),
SF20(20
subframes),
SF32(32
subframes),
SF40(40
subframes),
SF64(64
subframes),
SF80(80
subframes),
SF128(128
SF160(160 SF8~2, SF10~3,
SF256(256 SF32~6, SF40~7,
SF320(320 SF128~10,
SF512(512 SF256~12,
SF640(640 SF512~14,

GSM and LTE

Bufferzone
Optimization Interval Type 0~1023 N/A None
GSM and LTE

Bufferzone GSM_dcs1800, GSM_dcs1800~0,
Optimization Enumeration Type GSM_pcs1900 GSM_pcs1900~1 None
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
SRVCC to UTRAN
SRVCC to GERAN Interval Type 0~9 N/A None
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
SRVCC to UTRAN
SRVCC to GERAN Interval Type 0~30 N/A 0.5dB
PS Inter-RAT 0ms~0, 40ms~1,
Mobility between E- 64ms~2, 80ms~3,
UTRAN and 100ms~4,
UTRAN 128ms~5,
PS Inter-RAT 160ms~6,
Mobility between E- 256ms~7,
UTRAN and 0ms, 40ms, 64ms, 320ms~8,
GERAN 80ms, 100ms, 480ms~9,
PS Inter-RAT 128ms, 160ms, 512ms~10,
Mobility between E- 256ms, 320ms, 640ms~11,
UTRAN and 480ms, 512ms, 1024ms~12,
CDMA2000 640ms, 1024ms, 1280ms~13,
SRVCC to UTRAN 1280ms, 2560ms, 2560ms~14,
SRVCC to GERAN Enumeration Type 5120ms 5120ms~15 ms
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
SRVCC to UTRAN
SRVCC to GERAN Interval Type -141~-43 N/A dBm
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
SRVCC to UTRAN
SRVCC to GERAN Interval Type -40~-6 N/A 0.5dB
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
SRVCC to UTRAN
SRVCC to GERAN Interval Type -141~-43 N/A dBm
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
SRVCC to UTRAN
SRVCC to GERAN Interval Type -40~-6 N/A 0.5dB
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000 Interval Type 0~15 N/A None

Enhanced CS
Fallback to
CDMA2000 1xRTT Interval Type 0~30 N/A 0.5dB

0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
128ms~5,
160ms~6,
256ms~7,
0ms, 40ms, 64ms, 320ms~8,
80ms, 100ms, 480ms~9,
128ms, 160ms, 512ms~10,
256ms, 320ms, 640ms~11,
480ms, 512ms, 1024ms~12,
Enhanced CS 640ms, 1024ms, 1280ms~13,
Fallback to 1280ms, 2560ms, 2560ms~14,
CDMA2000 1xRTT Enumeration Type 5120ms 5120ms~15 None
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000 Interval Type -63~0 N/A 0.5dB
RRC Connection
MS100_T301(100m
s),
MS200_T301(200m
s),
MS300_T301(300m
s),
MS400_T301(400m
s),
MS600_T301(600m MS100_T301~0,
s), MS200_T301~1,
MS1000_T301(100 MS300_T301~2,
0ms), MS400_T301~3,
MS1500_T301(150 MS600_T301~4,
0ms), MS1000_T301~5,
RRC Connection MS2000_T301(200 MS1500_T301~6,
Management Enumeration Type 0ms) MS2000_T301~7 ms
MS0_T310(0ms),
MS50_T310(50ms),
MS100_T310(100m
s),
MS200_T310(200m
s), MS0_T310~0,
MS500_T310(500m MS50_T310~1,
s), MS100_T310~2,
MS1000_T310(100 MS200_T310~3,
0ms), MS500_T310~4,
MS1000_T311(100
0ms),
MS3000_T311(300
0ms),
MS5000_T311(500
0ms),
MS10000_T311(10
000ms), MS1000_T311~0,
MS15000_T311(15 MS3000_T311~1,
000ms), MS5000_T311~2,
MS20000_T311(20 MS10000_T311~3,
000ms), MS15000_T311~4,
n1(1), n2(2), n3(3), n1~0, n2~1, n3~2,

RRC Connection n4(4), n6(6), n8(8), n4~3, n6~4, n8~5,
Management Enumeration Type n10(10), n20(20) n10~6, n20~7 None
n1(1), n2(2), n3(3), n1~0, n2~1, n3~2,
RRC Connection n4(4), n5(5), n6(6), n4~3, n5~4, n6~5,
Management Enumeration Type n8(8), n10(10) n8~6, n10~7 None
Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
PS Inter-RAT
Mobility between E-
UTRAN and
PS Inter-RAT
Mobility between E-
UTRAN and
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
PS Inter-RAT
Mobility between E-
UTRAN and
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN Interval Type 0~9 N/A None
Coverage Based
Intra-frequency
RRC Connection NOT_CFG(NOT_C NOT_CFG~0,

Management Enumeration Type FG), CFG(CFG) CFG~1 None
RRC Connection
Radio Bearer
Management Interval Type 0~65000 N/A ms
QCI1(QCI 1),
QCI2(QCI 2),
QCI3(QCI 3),
QCI4(QCI 4),
Basic Scheduling QCI7(QCI 7), QCI5~5, QCI6~6,
Dynamic QCI8(QCI 8), QCI7~7, QCI8~8,
Scheduling Enumeration Type QCI9(QCI 9) QCI9~9 None
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
PS Inter-RAT
Mobility between E-
UTRAN and
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
PS Inter-RAT
Mobility between E-
UTRAN and
PS Inter-RAT
Mobility between E-
UTRAN and
Coverage Based
Intra-frequency
ms5(SRI 5ms),
ms10(SRI 10ms),
ms20(SRI 20ms), ms5~0, ms10~1,
Physical Channel ms40(SRI 40ms), ms20~2, ms40~3,
Management Enumeration Type ms80(SRI 80ms) ms80~4 None
RRC Connection NOT_CFG(NOT_C NOT_CFG~0,

Management Enumeration Type FG), CFG(CFG) CFG~1 None
RRC Connection
Radio Bearer
Management Interval Type 0~65000 N/A ms
PS Inter-RAT
Mobility between E-
UTRAN and
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000 Interval Type 0~30 N/A 0.5dB
PS Inter-RAT
Mobility between E-
UTRAN and
0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
128ms~5,
160ms~6,
256ms~7,
0ms, 40ms, 64ms, 320ms~8,
80ms, 100ms, 480ms~9,
128ms, 160ms, 512ms~10,
256ms, 320ms, 640ms~11,
UTRAN and 1280ms, 2560ms, 2560ms~14,
CDMA2000 Enumeration Type 5120ms 5120ms~15 ms
CS Fallback to
CDMA2000 1xRTT Interval Type -63~0 N/A 0.5dB
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000 Interval Type -140~-43 N/A dBm
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000 Interval Type -40~-6 N/A 0.5dB
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
SRVCC to GERAN Interval Type 0~9 N/A None
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
SRVCC to GERAN Interval Type 0~30 N/A 0.5dB
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN Interval Type -110~-48 N/A dBm
0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
128ms~5,
160ms~6,
256ms~7,
0ms, 40ms, 64ms, 320ms~8,
80ms, 100ms, 480ms~9,
128ms, 160ms, 512ms~10,
GERAN 1280ms, 2560ms, 2560ms~14,
SRVCC to GERAN Enumeration Type 5120ms 5120ms~15 ms

RAT handover to
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
SRVCC to UTRAN Interval Type 0~9 N/A None
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
SRVCC to UTRAN Interval Type -48~0 N/A 0.5dB
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
SRVCC to UTRAN Interval Type -120~-25 N/A dBm
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
SRVCC to UTRAN Interval Type 0~30 N/A 0.5dB
0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
128ms~5,
160ms~6,
256ms~7,
0ms, 40ms, 64ms, 320ms~8,
80ms, 100ms, 480ms~9,
128ms, 160ms, 512ms~10,
UTRAN 1280ms, 2560ms, 2560ms~14,
SRVCC to UTRAN Enumeration Type 5120ms 5120ms~15 ms
RAT handover to
UTRAN
SRVCC to UTRAN Interval Type -48~0 N/A 0.5dB
RAT handover to
UTRAN
SRVCC to UTRAN Interval Type -120~-25 N/A dBm

Coverage Based
Inter-frequency
Handover Interval Type 0~30 N/A 0.5dB
0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
128ms~5,
160ms~6,
256ms~7,
0ms, 40ms, 64ms, 320ms~8,
80ms, 100ms, 480ms~9,
128ms, 160ms, 512ms~10,
256ms, 320ms, 640ms~11,
480ms, 512ms, 1024ms~12,
Coverage Based 640ms, 1024ms, 1280ms~13,
Inter-frequency 1280ms, 2560ms, 2560ms~14,
Handover Enumeration Type 5120ms 5120ms~15 ms
Coverage Based
Inter-frequency
Handover Interval Type -141~-43 N/A dBm
Coverage Based
Inter-frequency
Handover Interval Type -40~-6 N/A 0.5dB
Coverage Based
Inter-frequency
Coverage Based
Inter-frequency
Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency
Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency
0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
128ms~5,
160ms~6,
Coverage Based 256ms~7,
Inter-frequency 0ms, 40ms, 64ms, 320ms~8,
Handover 80ms, 100ms, 480ms~9,
Distance Based 128ms, 160ms, 512ms~10,
Handover 480ms, 512ms, 1024ms~12,
Service Based 640ms, 1024ms, 1280ms~13,
Service Based
Inter-frequency
Service Based
Inter-frequency
None Interval Type -141~-43 N/A dBm

None Interval Type -40~-6 N/A 0.5dB
Coverage Based
Inter-frequency
Handover Interval Type -30~30 N/A 0.5dB
Coverage Based
Inter-frequency
Coverage Based
Inter-frequency
None Interval Type -140~-43 N/A dBm

None Interval Type -40~-6 N/A 0.5dB

Coverage Based
Intra-frequency
Coverage Based
Intra-frequency
Handover Interval Type -30~30 N/A 0.5dB
0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
128ms~5,
160ms~6,
256ms~7,
0ms, 40ms, 64ms, 320ms~8,
80ms, 100ms, 480ms~9,
128ms, 160ms, 512ms~10,
256ms, 320ms, 640ms~11,
480ms, 512ms, 1024ms~12,
Intra-frequency 1280ms, 2560ms, 2560ms~14,











RAN Sharing by
More Operators Interval Type 0~5 N/A None
RAN Sharing with

Common Carrier
RAN Sharing by Character String
More Operators Type 1~32 characters N/A None
CNOPERATOR_PR
IMARY(Primary
RAN Sharing with Operator), CNOPERATOR_PR
Common Carrier CNOPERATOR_SE IMARY~0,
RAN Sharing by CONDARY(Second CNOPERATOR_SE
More Operators Enumeration Type ary Operator) CONDARY~1 None
RAN Sharing with

Common Carrier
More Operators Type 3 characters N/A None
RAN Sharing with

Common Carrier
More Operators Type 2~3 characters N/A None
RAN Sharing with

Common Carrier
RAN Sharing with
Dedicated Carrier Interval Type 0~5 N/A None
RAN Sharing with
Common Carrier
RAN Sharing with
RAN Sharing with

Common Carrier
RAN Sharing with
RAN Sharing with

Common Carrier
RAN Sharing with
RAN Sharing with
Common Carrier
RAN Sharing with
Emergency Call Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

Emergency Call Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Emergency Call Interval Type 1~15 N/A None

Emergency Call Interval Type 1~15 N/A None
ALL_OUTPUT(All
Output),
ABNORMAL_NOR
MAL_SAMPLE(Abn
ormal Normal ALL_OUTPUT~0,
Sample), ABNORMAL_NOR
ABNORMAL_ALL_ MAL_SAMPLE~1,
NORMAL_SAMPLE ABNORMAL_ALL_
(Abnormal All NORMAL_SAMPLE
None Enumeration Type Normal Sample) ~2 None
INDEPENDENT(Ind
ependent Operator
Mode),
SHARED_FREQ(S
hared Frequency
Sharing Mode),
RAN Sharing with SEPARATED_FRE INDEPENDENT~0,
Common Carrier Q(Separate SHARED_FREQ~1,
RAN Sharing with Frequency Sharing SEPARATED_FRE
Dedicated Carrier Enumeration Type Mode) Q~2 None

X2_OVER_M2000(
X2SonLink is set up
over M2000),
X2_OVER_S1(X2S
onLink is set up X2_OVER_M2000~
None Enumeration Type over S1) 0, X2_OVER_S1~1 None
Physical Channel
Management Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
LCG_PROFILE_0~
Basic Scheduling 0,
Dynamic LCG_PROFILE_0, LCG_PROFILE_1~
Scheduling Enumeration Type LCG_PROFILE_1 1 None

RRC Connection
Automatic
Neighbour Relation
(ANR) Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
SELECTED_PLMNI
SELECTED_PLMNI D~1,
D, PRIMARY_PLMNID
None Enumeration Type PRIMARY_PLMNID ~2 None
NULL~0,
BASED_ON_RIM~
NULL, 1,
BASED_ON_RIM, BASED_ON_ECO~
None Enumeration Type BASED_ON_ECO 2 None

Automatic
Neighbour Relation
(ANR) Interval Type 0~50400 N/A min
PrivateCoding, PrivateCoding~0,
None Enumeration Type StandardCoding StandardCoding~1 None
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
S1-Flex Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
RAN Sharing with

Common Carrier
RAN Sharing with
RAN Sharing with

Common Carrier
RAN Sharing with
Dedicated Carrier Interval Type 1~100 N/A %
Fair User Sharing
License
Management Interval Type 0~100 N/A %











Star Topology
Chain Topology
Tree Topology
S1-flex Interval Type 0~65535 N/A None
Star Topology
Chain Topology
Tree Topology
S1-flex Enumeration Type S1(S1), X2(X2) S1~0, X2~1 None
Star Topology
Chain Topology
Tree Topology
Star Topology
Chain Topology
Tree Topology
Star Topology
Chain Topology
Tree Topology
Star Topology
Chain Topology
Tree Topology
Star Topology
Chain Topology
Tree Topology
Star Topology
Chain Topology
Tree Topology
Release_R8(Releas
e 8),
Release_R9(Releas
Star Topology e 9), Release_R8~0,
Chain Topology Release_R10(Rele Release_R9~1,
Tree Topology Enumeration Type ase 10) Release_R10~2 None
Star Topology
Chain Topology Character String
Tree Topology Type 0~256 characters N/A None
CP_CFG(CP
Config),
Star Topology UP_CFG(UP
Chain Topology Config), CP_CFG~0,
Tree Topology CP_UP_CFG(CPU UP_CFG~1,
S1-flex Enumeration Type P Config) CP_UP_CFG~2 None
Star Topology
Chain Topology
Tree Topology

Normal(Normal),
Abnormal(Abnormal Normal~0,
None Enumeration Type ) Abnormal~1 None
FALSE(FALSE),
None Enumeration Type TRUE(TRUE) FALSE~0, TRUE~1 None
Normal(Normal), Normal~0,
Abnormal(Abnormal Abnormal~1,
None Enumeration Type ), Blocked(Blocked) Blocked~2 None
Star Topology
Chain Topology
Tree Topology
Star Topology
Chain Topology
Tree Topology
Star Topology
Chain Topology
Tree Topology
Release_R8(Releas
e 8),
Star Topology Release_R9(Releas
Chain Topology e 9), Release_R8~0,
Tree Topology Release_R10(Rele Release_R9~1,
S1-flex Enumeration Type ase 10) Release_R10~2 None
Star Topology
Chain Topology
Tree Topology FALSE(FALSE),
S1-flex Enumeration Type TRUE(TRUE) FALSE~0, TRUE~1 None
Star Topology
Chain Topology MANUAL_MODE, MANUAL_MODE~0
Tree Topology Enumeration Type AUTO_MODE , AUTO_MODE~1 None
MANUAL_CREATE
Star Topology (Manual Created), MANUAL_CREATE
Chain Topology AUTO_CREATE(Au ~0,
Tree Topology Enumeration Type to Created) AUTO_CREATE~1 None
Star Topology
Chain Topology
Tree Topology
Normal(Normal),
FALSE(FALSE),
TRUE(TRUE), FALSE~0, TRUE~1,
Character String
Character String
Character String

NULL(NULL),
LowerLinkFault(Low
er Layer Link Fault),
MmecImpact(Mmec
Impact),
SetupFail(Setup
Failure),
CfgErr(Configuratio
n Error),
LicRestrict(License
Restriction),
PlmnDiff(The PLMN
of the operator
owning the S1
interface is not NULL~0,
supported by the LowerLinkFault~1,
MME), MmecImpact~2,
TacNotCfg(The TAC SetupFail~3,
for the operator CfgErr~4,
owning the S1 LicRestrict~5,
interface is not PlmnDiff~6,
configured), TacNotCfg~7,
None Enumeration Type Undefine(Undefine) Undefine~255 None

DISABLE(disable), DISABLE~0,
None Enumeration Type ENABLE(enable) ENABLE~1 None
Star Topology
Chain Topology
Tree Topology Interval Type 0~11 N/A None
Star Topology
Chain Topology
Star Topology
Chain Topology
Star Topology
Chain Topology
Release_R8(Releas
e 8),
Release_R9(Releas
Star Topology
Chain Topology Character String
Tree Topology Type 0~256 characters N/A None
CP_CFG(CP
Config),
UP_CFG(UP
Star Topology Config), CP_CFG~0,
Chain Topology CP_UP_CFG(CPU UP_CFG~1,
Tree Topology Enumeration Type P Config) CP_UP_CFG~2 None

Normal(Normal),
Character String
None Type 3 characters N/A None
Character String
X2_BLACK_LIST_T
YPE(X2 Black List
Type), X2_BLACK_LIST_T
X2_WHITE_LIST_T YPE~0,
YPE(X2 White List X2_WHITE_LIST_T
None Enumeration Type Type) YPE~1 None
Star Topology
Chain Topology
Star Topology
Chain Topology
Star Topology
Chain Topology
Release_R8(Releas
e 8),
Release_R9(Releas
FORBID_AUTO_R
MV(Forbid Auto
Remove), FORBID_AUTO_R
Star Topology PERMIT_AUTO_R MV~0,
Chain Topology MV(Permit Auto PERMIT_AUTO_R
Tree Topology Enumeration Type Remove) MV~1 None
Star Topology
Chain Topology MANUAL_MODE, MANUAL_MODE~0
Tree Topology Enumeration Type AUTO_MODE , AUTO_MODE~1 None
MANUAL_CREATE
Star Topology (Manual Created), MANUAL_CREATE
Chain Topology AUTO_CREATE(Au ~0,
Tree Topology Enumeration Type to Created) AUTO_CREATE~1 None
Character String
Character String
Normal(Normal),
SCTP_LINK_FAUL
T(SCTP Link
Failure),
SETUP_FAILURE_
OCCUR(Setup
Failure),
PEERIN_BLACK_L SCTP_LINK_FAUL
IST(Peer eNodeB T~0,
Blacklisted), SETUP_FAILURE_
STATE_NORMAL(N OCCUR~1,
ULL), PEERIN_BLACK_L
SETUP_ONLY_ON IST~2,
E_LINK_ALLOWED STATE_NORMAL~
(Only one interface 3,
allowed to be setup SETUP_ONLY_ON
between two logical E_LINK_ALLOWED
None Enumeration Type eNodeBs) ~4 None

SF10(10
subframes),
SF20(20
subframes),
SF32(32
subframes),
SF40(40
subframes),
SF64(64
subframes),
SF80(80
subframes),
SF128(128
subframes),
SF160(160
subframes),
SF256(256
subframes),
SF320(320
SF512(512 SF32~2, SF40~3,
SF640(640 SF128~6,
SF1024(1024 SF256~8,
SF1280(1280 SF512~10,
SF2048(2048 SF1024~12,
SF2560(2560 SF2048~14,
PSF1(1 PDCCH
subframe), PSF2(2
PDCCH
subframes), PSF3(3
PDCCH
subframes), PSF4(4
PDCCH
subframes), PSF5(5
PDCCH
subframes), PSF6(6
PDCCH
subframes), PSF8(8
PDCCH
subframes),
PSF10(10 PDCCH
subframes),
PSF20(20 PDCCH
subframes),
PSF30(30 PDCCH
subframes),
PSF40(40 PDCCH
PSF100(100 PSF50~11,
PDCCH PSF60~12,
PSF200(200 PSF100~14,
PSF10(10 PDCCH
subframes),
PSF20(20 PDCCH
subframes),
PSF30(30 PDCCH
subframes),
PSF40(40 PDCCH
subframes),
PSF50(50 PDCCH
subframes),
PSF60(60 PDCCH
subframes),
PSF80(80 PDCCH
subframes),
PSF100(100
PDCCH
subframes),
PSF200(200
PDCCH
PSF300(300 PSF3~2, PSF4~3,
PDCCH PSF5~4, PSF6~5,
PSF500(500 PSF20~8,
PDCCH PSF30~9,
PSF750(750 PSF50~11,
PDCCH PSF60~12,
PSF1280(1280 PSF100~14,
PDCCH PSF200~15,
PSF1920(1920 PSF500~17,
PDCCH PSF750~18,
PSF2560(2560 PSF1920~20,
UU_DISABLE(Disa
ble),
UU_ENABLE(Enabl UU_DISABLE~0,
DRX Enumeration Type e) UU_ENABLE~1 None
SF2(2 subframes),
SF5(5 subframes),
SF8(8 subframes),
SF10(10
subframes),
SF16(16
subframes),
SF20(20
subframes),
SF32(32
subframes),
SF40(40
subframes),
SF64(64
subframes),
SF80(80
subframes),
SF128(128
SF160(160 SF8~2, SF10~3,
SF256(256 SF32~6, SF40~7,
SF320(320 SF128~10,
SF512(512 SF256~12,
SF640(640 SF512~14,
SF128(128
subframes),
SF160(160
subframes),
SF256(256
subframes),
SF320(320
subframes),
SF512(512
subframes),
SF640(640 SF128~6,
SF1024(1024 SF256~8,
SF1280(1280 SF512~10,
SF2048(2048 SF1024~12,
SF2560(2560 SF2048~14,
SF128(128
subframes),
SF160(160
subframes),
SF256(256
subframes),
SF320(320
subframes),
SF512(512
subframes),
SF640(640 SF128~6,
SF1024(1024 SF256~8,
SF1280(1280 SF512~10,
SF2048(2048 SF1024~12,
SF2560(2560 SF2048~14,
Dynamic
Scheduling Interval Type 10~254 N/A None
IMSSignalling(IMS
Signalling),
LowDelay(Low
Delay), IMSSignalling~5,
TCPorBuffStreamin LowDelay~7,
Dynamic g(TCP Based or TCPorBuffStreamin
Scheduling Enumeration Type Buffered Streaming) g~9 None
Dynamic
Scheduling
Transport
Differentiated Flow
Control Interval Type 1~1000 N/A 0.001
Dynamic
Scheduling Interval Type 1~1000 N/A 0.001
MinGbrRate_0_KB( MinGbrRate_0_KB
0KB/s), ~0,
1KB/s), ~8000,
2KB/s), ~16000,
MinGbrRate_4KB(4 MinGbrRate_4KB~
KB/s), 32000,
8KB/s), ~64000,
MinGbrRate_16_K MinGbrRate_16_K
B(16KB/s), B~128000,
B(32KB/s), B~256000,
Dynamic B(64KB/s), B~512000,
Scheduling MinGbrRate_128_K MinGbrRate_128_K
Transport B(128KB/s), B~1024000,
Differentiated Flow MinGbrRate_256_K MinGbrRate_256_K
Control B(256KB/s), B~2048000,
Transport Resource MinGbrRate_512_K MinGbrRate_512_K
Overload Control Enumeration Type B(512KB/s) B~4096000 KB/s
0KB/s), ~0,
1KB/s), ~8000,
2KB/s), ~16000,
KB/s), 32000,
8KB/s), ~64000,
B(16KB/s), B~128000,
Transport B(64KB/s), B~512000,
Overbooking MinGbrRate_128_K MinGbrRate_128_K
Transport Resource B(128KB/s), B~1024000,
Overload Control MinGbrRate_256_K MinGbrRate_256_K
Different Transport B(256KB/s), B~2048000,
Paths based on MinGbrRate_512_K MinGbrRate_512_K
QoS Grade Enumeration Type B(512KB/s) B~4096000 KB/s
Dynamic
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
PBR_0_KBps(0KB/
s),
PBR_8_KBps(8KB/
s),
PBR_16_KBps(16K
B/s),
PBR_32_KBps(32K
B/s),
PBR_64_KBps(64K PBR_0_KBps~0,
B/s), PBR_8_KBps~1,
PBR_128_KBps(12 PBR_16_KBps~2,
8KB/s), PBR_32_KBps~3,
Dynamic PBR_INFINITY(Infi PBR_256_KBps~6,
Scheduling Enumeration Type nity) PBR_INFINITY~7 KB/s
Dynamic
Radio Bearer
PAID_USER(Paid
User),
Dynamic FREE_USER(Free PAID_USER~0,
Scheduling Enumeration Type User) FREE_USER~1 None
Transport
Overbooking
Transport
Differentiated Flow
Control
Transport Resource
Overload Control FLOW_CTRL(Flow
Different Transport Control), FLOW_CTRL~0,
Paths based on NON_FLOW_CTRL NON_FLOW_CTRL
QoS Grade Enumeration Type (Non Flow Control) ~1 None
SRVCC to UTRAN
SRVCC to GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
SRVCC to UTRAN
PS Inter-RAT
Mobility between E- PS_HO~0,
UTRAN and PS_HO, SRVCC, SRVCC~1,
UTRAN Bit Field Type REDIRECTION REDIRECTION~2 None
SRVCC to GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN Bit Field Type SRVCC SRVCC~0 None
SRVCC to GERAN PS_HO~0,
PS Inter-RAT PS_HO, NACC_HO~1,
Mobility between E- NACC_HO, CCO_HO~2,
UTRAN and CCO_HO, SRVCC, SRVCC~3,
GERAN Bit Field Type REDIRECTION REDIRECTION~4 None
SRVCC(CDMA1XR
None Bit Field Type TTHoSwitch) SRVCC~0 None
PS Inter-RAT
Mobility between E-
UTRAN and OPT_HO, OPT_HO~0,
CDMA2000 Bit Field Type NON_OPT_HO NON_OPT_HO~1 None
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
Coverage Based
Intra-frequency
Handover
SRVCC to UTRAN
SRVCC to GERAN
CS Fallback to PERMIT_HO_ENU PERMIT_HO_ENU
UTRAN M(Permit Ho), M~0,
CS Fallback to FORBID_HO_ENU FORBID_HO_ENU
GERAN Enumeration Type M(Forbid Ho) M~1 None
PERMIT_FAST_AN
PERMIT_FAST_AN R_MEAS_ENUM~0
R_MEAS_ENUM, ,
FORBID_FAST_AN FORBID_FAST_AN
None Enumeration Type R_MEAS_ENUM R_MEAS_ENUM~1 None
Basic Scheduling Interval Type 0~15 N/A None

Radio Bearer
DiscardTimer_50(5 DiscardTimer_50~0
0 ms), ,
DiscardTimer_100( DiscardTimer_100~
100 ms), 1,
150 ms), 2,
300 ms), 3,
500 ms), 4,
750 ms), 5,
DiscardTimer_1500 DiscardTimer_1500
(1500 ms), ~6,
Radio Bearer DiscardTimer_Infinit DiscardTimer_Infinit
Management Enumeration Type y(infinity) y~7 ms
RlcMode_AM(Ackn
owledge Mode),
RlcMode_UM(Un-
Radio Bearer acknowledge RlcMode_AM~1,
Management Enumeration Type Mode) RlcMode_UM~2 None
Maxretx_Threshold Maxretx_Threshold
_t1(1), _t1~0,
_t2(2), _t2~1,
_t3(3), _t3~2,
_t4(4), _t4~3,
_t6(6), _t6~4,
_t8(8), _t8~5,
_t16(16), _t16~6,
Radio Bearer Maxretx_Threshold Maxretx_Threshold
Management Enumeration Type _t32(32) _t32~7 None
_t1(1), _t1~0,
_t2(2), _t2~1,
_t3(3), _t3~2,
_t4(4), _t4~3,
_t6(6), _t6~4,
_t8(8), _t8~5,
_t16(16), _t16~6,
Radio Bearer Maxretx_Threshold Maxretx_Threshold
Management Enumeration Type _t32(32) _t32~7 None
PollByte_kb25(25
kBytes),
PollByte_kb50(50
kBytes),
PollByte_kb75(75
kBytes),
PollByte_kb100(10
0 kBytes),
PollByte_kb125(12
5 kBytes),
PollByte_kb250(25
0 kBytes), PollByte_kb25~0,
PollByte_kb375(37 PollByte_kb50~1,
250 kBytes), PollByte_kb1250~1
PollByte_kb1500(1 0,
Radio Bearer PollByte_infinity(infi 3,
Management Enumeration Type nite kBytes) PollByte_infinity~14 byte
PollByte_kb25(25
kBytes),
PollByte_kb50(50
kBytes),
PollByte_kb75(75
kBytes),
PollByte_kb100(10
0 kBytes),
PollByte_kb125(12
5 kBytes),
PollByte_kb250(25
Radio Bearer PollByte_infinity(infi 3,
Management Enumeration Type nite kBytes) PollByte_infinity~14 byte
PollPdu_p4(4
PDUs),
PollPdu_p8(8
PDUs),
PollPdu_p16(16
PDUs),
PollPdu_p32(32
PDUs),
PollPdu_p64(64 PollPdu_p4~0,
PDUs), PollPdu_p8~1,
Radio Bearer PollPdu_Infinity(infi PollPdu_p256~6,
Management Enumeration Type nite PDUs) PollPdu_Infinity~7 None
PollPdu_p4(4
PDUs),
PollPdu_p8(8
PDUs),
PollPdu_p16(16
PDUs),
PollPdu_p32(32
PDUs),
Radio Bearer PollPdu_Infinity(infi PollPdu_p256~6,
Management Enumeration Type nite PDUs) PollPdu_Infinity~7 None
185ms), 36,
Tpollretrans_m190( Tpollretrans_m190~
190ms), 37,
195ms), 38,
200ms), 39,
205ms), 40,
210ms), 41,
215ms), 42,
220ms), 43,
225ms), 44,
230ms), 45,
235ms), 46,
240ms), 47,
245ms), 48,
250ms), 49,
300ms), 50,
350ms), 51,
400ms), 52,
450ms), 53,
Radio Bearer Tpollretrans_m500( Tpollretrans_m500~
Management Enumeration Type 500ms) 54 ms
185ms), 36,
190ms), 37,
195ms), 38,
200ms), 39,
205ms), 40,
210ms), 41,
215ms), 42,
220ms), 43,
225ms), 44,
230ms), 45,
235ms), 46,
240ms), 47,
245ms), 48,
250ms), 49,
300ms), 50,
350ms), 51,
400ms), 52,
450ms), 53,
Radio Bearer Tpollretrans_m500( Tpollretrans_m500~
185ms), ~37,
Tstatprohibit_m190( Tstatprohibit_m190
190ms), ~38,
195ms), ~39,
200ms), ~40,
205ms), ~41,
210ms), ~42,
215ms), ~43,
220ms), ~44,
225ms), ~45,
230ms), ~46,
235ms), ~47,
240ms), ~48,
245ms), ~49,
250ms), ~50,
300ms), ~51,
350ms), ~52,
400ms), ~53,
450ms), ~54,
Radio Bearer Tstatprohibit_m500( Tstatprohibit_m500
Management Enumeration Type 500ms) ~55 ms
185ms), ~37,
190ms), ~38,
195ms), ~39,
200ms), ~40,
205ms), ~41,
210ms), ~42,
215ms), ~43,
220ms), ~44,
225ms), ~45,
230ms), ~46,
235ms), ~47,
240ms), ~48,
245ms), ~49,
250ms), ~50,
300ms), ~51,
350ms), ~52,
400ms), ~53,
450ms), ~54,
Radio Bearer Tstatprohibit_m500( Tstatprohibit_m500
Management Enumeration Type 500ms) ~55 ms
0ms), 2,
Treordering_m65(6 Treordering_m65~1
5ms), 3,
0ms), 4,
5ms), 5,
0ms), 6,
5ms), 7,
0ms), 8,
5ms), 9,
Treordering_m100( Treordering_m100~
100ms), 20,
Treordering_m110(1 Treordering_m110~
10ms), 21,
120ms), 22,
130ms), 23,
140ms), 24,
150ms), 25,
160ms), 26,
170ms), 27,
180ms), 28,
190ms), 29,
Radio Bearer Treordering_m200( Treordering_m200~
0ms), 2,
5ms), 3,
0ms), 4,
5ms), 5,
0ms), 6,
5ms), 7,
0ms), 8,
5ms), 9,
100ms), 20,
10ms), 21,
120ms), 22,
130ms), 23,
140ms), 24,
150ms), 25,
160ms), 26,
170ms), 27,
180ms), 28,
190ms), 29,
PdcpSnsize_7bits(7 PdcpSnsize_7bits~
bits), 0,
Radio Bearer PdcpSnsize_12bits( PdcpSnsize_12bits
Management Enumeration Type 12 bits) ~1 bit
RlcSnSize_size5(5b
its), RlcSnSize_size5~0,
Radio Bearer RlcSnSize_size10(1 RlcSnSize_size10~
Management Enumeration Type 0bits) 1 bit
RlcSnSize_size5(5b
its), RlcSnSize_size5~0,
Radio Bearer RlcSnSize_size10(1 RlcSnSize_size10~
Management Enumeration Type 0bits) 1 bit
0ms), 2,
5ms), 3,
0ms), 4,
5ms), 5,
0ms), 6,
5ms), 7,
0ms), 8,
5ms), 9,
100ms), 20,
10ms), 21,
120ms), 22,
130ms), 23,
140ms), 24,
150ms), 25,
160ms), 26,
170ms), 27,
180ms), 28,
190ms), 29,
0ms), 2,
5ms), 3,
0ms), 4,
5ms), 5,
0ms), 6,
5ms), 7,
0ms), 8,
5ms), 9,
100ms), 20,
10ms), 21,
120ms), 22,
130ms), 23,
140ms), 24,
150ms), 25,
160ms), 26,
170ms), 27,
180ms), 28,
190ms), 29,
Radio Bearer FALSE(FALSE),

Management Enumeration Type TRUE(TRUE) FALSE~0, TRUE~1 None
QCI1(QCI 1),
QCI2(QCI 2),
QCI3(QCI 3),
QCI4(QCI 4),
Dynamic QCI8(QCI 8), QCI7~7, QCI8~8,
Scheduling Enumeration Type QCI9(QCI 9) QCI9~9 None
Dynamic
Scheduling
Transport
Differentiated Flow
Control Interval Type 1~1000 N/A 0.001
Dynamic
0KB/s), ~0,
1KB/s), ~8000,
2KB/s), ~16000,
KB/s), 32000,
8KB/s), ~64000,
B(16KB/s), B~128000,
B(32KB/s), B~256000,
B(64KB/s), B~512000,
B(128KB/s), B~1024000,
Dynamic MinGbrRate_256_K MinGbrRate_256_K
Scheduling B(256KB/s), B~2048000,
Transport Resource MinGbrRate_512_K MinGbrRate_512_K
Overload Control Enumeration Type B(512KB/s) B~4096000 KB/s
0KB/s), ~0,
1KB/s), ~8000,
2KB/s), ~16000,
KB/s), 32000,
8KB/s), ~64000,
B(16KB/s), B~128000,
B(32KB/s), B~256000,
B(64KB/s), B~512000,
Different Transport B(256KB/s), B~2048000,
Paths based on MinGbrRate_512_K MinGbrRate_512_K
QoS Grade Enumeration Type B(512KB/s) B~4096000 KB/s
Dynamic
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
Dynamic
PBR_0_KBps(0KB/
s),
PBR_8_KBps(8KB/
s),
PBR_16_KBps(16K
B/s),
PBR_32_KBps(32K
B/s),
PBR_64_KBps(64K PBR_0_KBps~0,
B/s), PBR_8_KBps~1,
Dynamic PBR_INFINITY(Infi PBR_256_KBps~6,
Scheduling Enumeration Type nity) PBR_INFINITY~7 KB/s
Dynamic
Transport
Overbooking
Transport
Differentiated Flow
Control
Transport Resource
Overload Control FLOW_CTRL(Flow
Different Transport Control), FLOW_CTRL~0,
Paths based on NON_FLOW_CTRL NON_FLOW_CTRL
QoS Grade Enumeration Type (Non Flow Control) ~1 None











CLASS_0(CLASS_
0),
CLASS_1(CLASS_
1), CLASS_0~0,
CLASS_2(CLASS_ CLASS_1~1,
None Enumeration Type 2) CLASS_2~2 None
NO_ADAPTIVE(NO
DL 2x2 MIMO _ADAPTIVE),
DL 4x2 MIMO TxD_BF_ADAPTIV
DL 4x4 MIMO E(TxD_BF_ADAPTI NO_ADAPTIVE~0,
Single Streaming VE), TxD_BF_ADAPTIV
Beamforming MIMO_BF_ADAPTI E~1,
Dual Streaming VE(MIMO_BF_ADA MIMO_BF_ADAPTI
Beamforming Enumeration Type PTIVE) VE~2 None
DL 2x2 MIMO
DL 4x2 MIMO
DL 4x4 MIMO TM2(TM2),
Single Streaming TM3(TM3),
Beamforming TM7(TM7), TM2~0, TM3~1,
Dual Streaming TM8(TM8), TM7~2, TM8~3,
Beamforming Enumeration Type TM4(TM4) TM4~4 None
Basic Scheduling
Dynamic
Scheduling Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
ms2(2ms),
ms5(5ms), ms2~2, ms5~5,
ms10(10ms), ms10~10,
ms20(20ms), ms20~20,
ms32(32ms), ms32~32,
ms40(40ms), ms40~40,
ms64(64ms), ms64~64,
Basic Scheduling ms80(80ms), ms80~80,
Dynamic ms128(128ms), ms128~128,
Scheduling Enumeration Type ms160(160ms) ms160~160 ms
AMC
CQI Adjustment Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
NO_ADAPTIVE(NO
_ADAPTIVE),
OL_ADAPTIVE(OL
_ADAPTIVE),
CL_ADAPTIVE(CL_ NO_ADAPTIVE~0,
DL 2x2 MIMO ADAPTIVE), OL_ADAPTIVE~1,
DL 4x2 MIMO OC_ADAPTIVE(OC CL_ADAPTIVE~2,
DL 4x4 MIMO Enumeration Type _ADAPTIVE) OC_ADAPTIVE~3 None
TM2(TM2),
DL 4x2 MIMO TM4(TM4), TM2~0, TM3~1,
DL 4x4 MIMO Enumeration Type TM6(TM6) TM4~2, TM6~3 None
DL 4x2 MIMO ADAPTIVE(ADAPTI TM2~0,
DL 4x4 MIMO Enumeration Type VE) ADAPTIVE~1 None
Physical Channel
ms5(5ms),
ms10(10ms),
Physical Channel ms20(20ms), ms5~1, ms10~2,
Management Enumeration Type ms40(40ms) ms20~3, ms40~4 ms
QCI1(QCI 1),
QCI2(QCI 2),
QCI3(QCI 3),
QCI4(QCI 4),
None Enumeration Type QCI9(QCI 9) QCI9~9 None
TPeriodBSRTimer_
sf5(5 subframes),
TPeriodBSRTimer_
sf10(10 subframes),
TPeriodBSRTimer_
sf16(16 subframes),
TPeriodBSRTimer_
sf20(20 subframes), TPeriodBSRTimer_
TPeriodBSRTimer_ sf5~0,
sf128(128 TPeriodBSRTimer_
subframes), sf40~5,
TPeriodBSRTimer_ TPeriodBSRTimer_
sf160(160 sf64~6,
subframes), TPeriodBSRTimer_
subframes), sf128~8,
sf640(640 sf160~9,
subframes), sf640~11,
sf2560(2560 sf1280~12,
TPeriodBSRTimer_i sf2560~13,
nfinity(infinity TPeriodBSRTimer_i
None Enumeration Type subframes) nfinity~14 subframe
sf320(sf320),
sf640(sf640), sf320~0, sf640~1,
sf1280(sf1280), sf1280~2,
sf2560(sf2560), sf2560~3,
sf5120(sf5120), sf5120~4,
None Enumeration Type sf10240(sf10240) sf10240~5 subframe
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
Mobility
Management
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
Handover
SRVCC to UTRAN
SRVCC to GERAN
CS Fallback to
UTRAN
CS Fallback to
GERAN
CS Fallback to
CDMA2000 1xRTT
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN GAP_PATTERN_T GAP_PATTERN_T
Distance based YPE_1, YPE_1~1,
Inter-RAT handover GAP_PATTERN_T GAP_PATTERN_T
to GERAN Enumeration Type YPE_2 YPE_2~2 None
Coverage Based
Intra-frequency
Handover
Coverage Based FC0~0, FC1~1,
Inter-frequency FC2~2, FC3~3,
Handover FC4~4, FC5~5,
Distance Based FC6~6, FC7~7,
Inter-frequency FC0, FC1, FC2, FC8~8, FC9~9,
Handover FC3, FC4, FC5, FC11~10,
Service Based FC6, FC7, FC8, FC13~11,
Inter-frequency FC9, FC11, FC13, FC15~12,
Handover Enumeration Type FC15, FC17, FC19 FC17~13, FC19~14 None
Coverage Based
Intra-frequency
Coverage Based FC2~2, FC3~3,
Inter-frequency FC4~4, FC5~5,
Distance Based FC0, FC1, FC2, FC8~8, FC9~9,
Inter-frequency FC3, FC4, FC5, FC11~10,
Handover FC6, FC7, FC8, FC13~11,
Service Based FC9, FC11, FC13, FC15~12,
Inter-frequency Enumeration Type FC15, FC17, FC19 FC17~13, FC19~14 None
PS Inter-RAT FC0~0, FC1~1,
Mobility between E- FC2~2, FC3~3,
UTRAN and FC4~4, FC5~5,
GERAN FC6~6, FC7~7,
SRVCC to GERAN FC0, FC1, FC2, FC8~8, FC9~9,
CS Fallback to FC3, FC4, FC5, FC11~10,
GERAN FC6, FC7, FC8, FC13~11,
Flash CS Fallback FC9, FC11, FC13, FC15~12,
to GERAN Enumeration Type FC15, FC17, FC19 FC17~13, FC19~14 None
Coverage Based
Inter-frequency
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
Mobility
Management
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
Handover
SRVCC to UTRAN
SRVCC to GERAN
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover NOT_CFG~0,
to GERAN Enumeration Type NOT_CFG, CFG CFG~1 None
Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
Mobility
Management
SRVCC to UTRAN
SRVCC to GERAN
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
to GERAN Interval Type -141~-43 N/A dBm
Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
Mobility
Management
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
Handover
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover NOT_CFG~0,
to GERAN Enumeration Type NOT_CFG, CFG CFG~1 None
Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
Mobility
Management
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
Handover
Service based
Inter-RAT handover
to UTRAN T_CRMAX_30S(30
Distance based s),
Inter-RAT handover T_CRMAX_60S(60
to UTRAN s), T_CRMAX_30S~0,
Service based T_CRMAX_120S(1 T_CRMAX_60S~1,
Inter-RAT handover 20s), T_CRMAX_120S~2
to GERAN T_CRMAX_180S(1 ,
Distance based 80s), T_CRMAX_180S~3
Inter-RAT handover T_CRMAX_240S(2 ,
to GERAN Enumeration Type 40s) T_CRMAX_240S~4 s
Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
Mobility
Management
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
Handover
Service based
Inter-RAT handover
to UTRAN T_CRMAXHYST_3 T_CRMAXHYST_3
Distance based 0S(30s), 0S~0,
Inter-RAT handover T_CRMAXHYST_6 T_CRMAXHYST_6
to UTRAN 0S(60s), 0S~1,
Service based T_CRMAXHYST_1 T_CRMAXHYST_1
Inter-RAT handover 20S(120s), 20S~2,
to GERAN T_CRMAXHYST_1 T_CRMAXHYST_1
Distance based 80S(180s), 80S~3,
Inter-RAT handover T_CRMAXHYST_2 T_CRMAXHYST_2
to GERAN Enumeration Type 40S(240s) 40S~4 s
Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
Mobility
Management
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
Handover
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
to GERAN Interval Type 1~16 N/A None
Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
Mobility
Management
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
Handover
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
Mobility
Management
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
Handover
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover TTT_SF_MEDIUM_ TTT_SF_MEDIUM_
to UTRAN 0DOT25(0.25), 0DOT25~0,
Service based TTT_SF_MEDIUM_ TTT_SF_MEDIUM_
Inter-RAT handover 0DOT50(0.5), 0DOT50~1,
to GERAN TTT_SF_MEDIUM_ TTT_SF_MEDIUM_
Distance based 0DOT75(0.75), 0DOT75~2,
Inter-RAT handover TTT_SF_MEDIUM_ TTT_SF_MEDIUM_
to GERAN Enumeration Type LDOT0(1) LDOT0~3 None
Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
Mobility
Management
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
Handover
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover TTT_SF_HIGH_0D TTT_SF_HIGH_0D
to UTRAN OT25(0.25), OT25~0,
Service based TTT_SF_HIGH_0D TTT_SF_HIGH_0D
Inter-RAT handover OT50(0.5), OT50~1,
to GERAN TTT_SF_HIGH_0D TTT_SF_HIGH_0D
Distance based OT75(0.75), OT75~2,
Inter-RAT handover TTT_SF_HIGH_LD TTT_SF_HIGH_LD
to GERAN Enumeration Type OT0(1) OT0~3 None
FC0~0, FC1~1,
FC2~2, FC3~3,
UTRAN and FC0, FC1, FC2, FC8~8, FC9~9,
UTRAN FC3, FC4, FC5, FC11~10,
SRVCC to UTRAN FC6, FC7, FC8, FC13~11,
UTRAN Enumeration Type FC15, FC17, FC19 FC17~13, FC19~14 None
FC0~0, FC1~1,
FC2~2, FC3~3,
UTRAN and FC0, FC1, FC2, FC8~8, FC9~9,
UTRAN FC3, FC4, FC5, FC11~10,
SRVCC to UTRAN FC6, FC7, FC8, FC13~11,
UTRAN Enumeration Type FC15, FC17, FC19 FC17~13, FC19~14 None
Enhanced CS
Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
SRVCC to UTRAN
SRVCC to GERAN
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
Enhanced CS
Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
SRVCC to UTRAN
SRVCC to GERAN
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN r1(1), r2(2), r4(4),
Distance based r8(8), r16(16), r1~0, r2~1, r4~2,
Inter-RAT handover r32(32), r64(64), r8~3, r16~4, r32~5,
to GERAN Enumeration Type Infinity(Infinity) r64~6, Infinity~7 None
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
SRVCC to GERAN
CS Fallback to
UTRAN
CS Fallback to
GERAN
CS Fallback to 120ms~0,
CDMA2000 1xRTT 240ms~1,
Mobility between E- 640ms~3,
UTRAN and 1024ms~4,
UTRAN 2048ms~5,
Service based 120ms, 240ms, 5120ms~6,
Inter-RAT handover 480ms, 640ms, 10240ms~7,
to GERAN 1024ms, 2048ms, 1min~8, 6min~9,
Distance based 5120ms, 10240ms, 12min~10,
Inter-RAT handover 1min, 6min, 12min, 30min~11,
to GERAN Enumeration Type 30min, 60min 60min~12 None
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
SRVCC to UTRAN
CS Fallback to RSCP, ECN0, RSCP~0, ECN0~1,
UTRAN Enumeration Type BOTH BOTH~2 None
120ms~0,
240ms~1,
480ms~2,
640ms~3,
1024ms~4,
UTRAN 1024ms, 2048ms, 1min~8, 6min~9,
SRVCC to UTRAN 5120ms, 10240ms, 12min~10,
CS Fallback to 1min, 6min, 12min, 30min~11,
UTRAN Enumeration Type 30min, 60min 60min~12 None
Enhanced CS
Fallback to
CDMA2000 1xRTT PILOT_STRENGTH
PS Inter-RAT PILOT_STRENGTH ~0,
Mobility between E- , PILOT_PN_PHASE
UTRAN and PILOT_PN_PHASE _AND_STRENGTH
CDMA2000 Enumeration Type _AND_STRENGTH ~1 None
120ms~0,
240ms~1,
480ms~2,
640ms~3,
1024ms~4,
Enhanced CS 2048ms~5,
CDMA2000 1xRTT 480ms, 640ms, 10240ms~7,
PS Inter-RAT 1024ms, 2048ms, 1min~8, 6min~9,
Mobility between E- 5120ms, 10240ms, 12min~10,
UTRAN and 1min, 6min, 12min, 30min~11,
CDMA2000 Enumeration Type 30min, 60min 60min~12 None
PS Inter-RAT
Mobility between E-
UTRAN and PILOT_STRENGTH
CDMA2000 Enumeration Type PILOT_STRENGTH ~0 None
120ms~0,
240ms~1,
480ms~2,
640ms~3,
1024ms~4,
2048ms~5,
120ms, 240ms, 5120ms~6,
480ms, 640ms, 10240ms~7,
PS Inter-RAT 1024ms, 2048ms, 1min~8, 6min~9,
Mobility between E- 5120ms, 10240ms, 12min~10,
UTRAN and 1min, 6min, 12min, 30min~11,
CDMA2000 Enumeration Type 30min, 60min 60min~12 None
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
SRVCC to UTRAN RSRP, RSRQ, RSRP~0, RSRQ~1,
SRVCC to GERAN Enumeration Type BOTH BOTH~2 None
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
SRVCC to UTRAN EventB1(EventB1), EventB1~0,
SRVCC to GERAN Enumeration Type EventB2(EventB2) EventB2~1 None
Enhanced CS
Fallback to
Enhanced CS
Fallback to
PS Mobility from E-
UTRAN to
CDMA2000 HRPD
Based on
Frequency-specific
Factors
Enhanced CS
Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E- BY_PRIORITY, BY_PRIORITY~0,
UTRAN and BY_SELECT_RATI BY_SELECT_RATI
CDMA2000 Enumeration Type O O~1 None
CS Fallback to
CDMA2000 1xRTT
Based on BY_PRIORITY, BY_PRIORITY~0,
Frequency-specific BY_SELECT_RATI BY_SELECT_RATI
Factors Enumeration Type O O~1 None
Enhanced CS
Fallback to NONE, NONE~0,
CDMA2000 1xRTT Enumeration Type REDIRECTION REDIRECTION~1 None
Enhanced CS
Fallback to PERIOD~0,
CDMA2000 1xRTT Enumeration Type PERIOD, EVENT EVENT~1 None
CS Fallback to
CDMA2000 1xRTT
Enhanced CS FIXED, FIXED~0,
Fallback to BY_MEAS_RESUL BY_MEAS_RESUL
CDMA2000 1xRTT Enumeration Type T T~1 None
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
Flash CS Fallback
to UTRAN Interval Type 1~16 N/A None
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
Flash CS Fallback
CS Fallback to
CS Fallback to
UTRAN
Flash CS Fallback
Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
Handover
Mobility
Management
SRVCC to UTRAN
SRVCC to GERAN
CS Fallback to
UTRAN
CS Fallback to
GERAN
CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
Handover
Mobility
Management
SRVCC to UTRAN
SRVCC to GERAN
CS Fallback to
UTRAN
CS Fallback to
GERAN
CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT r1(1), r2(2), r4(4),
Mobility between E- r8(8), r16(16), r1~0, r2~1, r4~2,
UTRAN and r32(32), r64(64), r8~3, r16~4, r32~5,
UTRAN Enumeration Type Infinity(Infinity) r64~6, Infinity~7 None
Coverage Based
Intra-frequency
Handover Enumeration Type RSRP, RSRQ RSRP~0, RSRQ~1 None
Coverage Based SAME_AS_TRIG_
Intra-frequency QUAN(Same as SAME_AS_TRIG_
Handover Enumeration Type Trig Quan), BOTH QUAN~0, BOTH~1 None
120ms~0,
240ms~1,
480ms~2,
640ms~3,
1024ms~4,
2048ms~5,
120ms, 240ms, 5120ms~6,
Intra-frequency 1024ms, 2048ms, 1min~8, 6min~9,
Handover 5120ms, 10240ms, 12min~10,
Intra-LTE Load 1min, 6min, 12min, 30min~11,
Balancing Enumeration Type 30min, 60min 60min~12 None
Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency
Handover
Service Based SAME_AS_TRIG_
Inter-frequency QUAN(Same as SAME_AS_TRIG_
Handover Enumeration Type Trig Quan), BOTH QUAN~0, BOTH~1 None
120ms~0,
240ms~1,
480ms~2,
Coverage Based 640ms~3,
Inter-frequency 1024ms~4,
Handover 2048ms~5,
Distance Based 120ms, 240ms, 5120ms~6,
Handover 1024ms, 2048ms, 1min~8, 6min~9,
Service Based 5120ms, 10240ms, 12min~10,
Inter-frequency 1min, 6min, 12min, 30min~11,
Handover Enumeration Type 30min, 60min 60min~12 None
Coverage Based
Inter-frequency RSRP, RSRQ, RSRP~0, RSRQ~1,
Handover Enumeration Type BOTH BOTH~2 None
RSRP, RSRQ, RSRP~0, RSRQ~1,

None Enumeration Type BOTH BOTH~2 None
Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency RSRP, RSRQ, RSRP~0, RSRQ~1,
Handover Enumeration Type BOTH BOTH~2 None
0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
128ms~5,
160ms~6,
256ms~7,
0ms, 40ms, 64ms, 320ms~8,
80ms, 100ms, 480ms~9,
128ms, 160ms, 512ms~10,
256ms, 320ms, 640ms~11,
480ms, 512ms, 1024ms~12,
640ms, 1024ms, 1280ms~13,
CS Fallback to 1280ms, 2560ms, 2560ms~14,
UTRAN Enumeration Type 5120ms 5120ms~15 ms
0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
128ms~5,
160ms~6,
256ms~7,
0ms, 40ms, 64ms, 320ms~8,
80ms, 100ms, 480ms~9,
128ms, 160ms, 512ms~10,
256ms, 320ms, 640ms~11,
480ms, 512ms, 1024ms~12,
640ms, 1024ms, 1280ms~13,
CS Fall Back to 1280ms, 2560ms, 2560ms~14,
GERAN Enumeration Type 5120ms 5120ms~15 ms
0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
128ms~5,
160ms~6,
256ms~7,
0ms, 40ms, 64ms, 320ms~8,
80ms, 100ms, 480ms~9,
128ms, 160ms, 512ms~10,
Enhanced CS 256ms, 320ms, 640ms~11,
CDMA2000 1xRTT 640ms, 1024ms, 1280ms~13,
CS Fallback 1280ms, 2560ms, 2560ms~14,
Steering to UTRAN Enumeration Type 5120ms 5120ms~15 ms
CS Fallback to
UTRAN Interval Type -120~-25 N/A dBm
CS Fallback to
UTRAN Interval Type -48~0 N/A 0.5dB
CS Fall Back to
Enhanced CS
Fallback to
CDMA2000 1xRTT
CS Fallback
Steering to UTRAN Interval Type -63~0 N/A 0.5dB
Flash CS Fallback
to UTRAN
Flash CS Fallback
to GERAN Interval Type -141~-43 N/A dBm
CS Fallback to
UTRAN
CS Fallback to
GERAN
Enhanced CS
Fallback to
CDMA2000 1xRTT Interval Type 1~10 N/A s

NOT_CFG(Not
Broadcast of configure), NOT_CFG~0,
system information Enumeration Type CFG(Configure) CFG~1 None
BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0,
BOOLEAN_TRUE( BOOLEAN_TRUE~
Emergency Call Enumeration Type True) 1 None
NOT_CFG(Not
P00(0%), P05(5%),
P10(10%),
P15(15%),
P20(20%),
P25(25%),
P30(30%),
P40(40%),
P50(50%), P00~0, P05~1,
P60(60%), P10~2, P15~3,
P70(70%), P20~4, P25~5,
P75(75%), P30~6, P40~7,
P80(80%), P50~8, P60~9,
P85(85%), P70~10, P75~11,
Broadcast of P90(90%), P80~12, P85~13,
system information Enumeration Type P95(95%) P90~14, P95~15 %
ACCESS_BARRIN
G_TIME_S4(4s),
ACCESS_BARRIN
G_TIME_S8(8s), ACCESS_BARRIN
ACCESS_BARRIN G_TIME_S4~0,
G_TIME_S128(128 ACCESS_BARRIN
s), G_TIME_S64~4,
ACCESS_BARRIN ACCESS_BARRIN
G_TIME_S256(256 G_TIME_S128~5,
s), ACCESS_BARRIN
Broadcast of G_TIME_S512(512 ACCESS_BARRIN
system information Enumeration Type s) G_TIME_S512~7 s
False), ~0,
Broadcast of BOOLEAN_TRUE( BOOLEAN_TRUE~
system information Enumeration Type True) 1 None
False), ~0,
False), ~0,
False), ~0,
False), ~0,
NOT_CFG(Not
P00(0%), P05(5%),
P10(10%),
P15(15%),
P20(20%),
P25(25%),
P30(30%),
P40(40%),
P50(50%), P00~0, P05~1,
P60(60%), P10~2, P15~3,
P70(70%), P20~4, P25~5,
P75(75%), P30~6, P40~7,
P80(80%), P50~8, P60~9,
P85(85%), P70~10, P75~11,
Broadcast of P90(90%), P80~12, P85~13,
ACCESS_BARRIN
G_TIME_S4(4s),
ACCESS_BARRIN
s), G_TIME_S64~4,
s), ACCESS_BARRIN
False), ~0,
False), ~0,
False), ~0,
False), ~0,
False), ~0,
NOT_CFG(Not
P00(0%), P05(5%),
P10(10%),
P15(15%),
P20(20%),
P25(25%),
P30(30%),
P40(40%),
P50(50%), P00~0, P05~1,
P60(60%), P10~2, P15~3,
P70(70%), P20~4, P25~5,
P75(75%), P30~6, P40~7,
P80(80%), P50~8, P60~9,
P85(85%), P70~10, P75~11,
Broadcast of P90(90%), P80~12, P85~13,
ACCESS_BARRIN
G_TIME_S4(4s),
ACCESS_BARRIN
s), G_TIME_S64~4,
s), ACCESS_BARRIN
AC11BARSTATE(A
C11BARSTATE), AC11BARSTATE~0
AC12BARSTATE(A ,
AC13BARSTATE(A ,
AC14BARSTATE(A ,
Broadcast of AC15BARSTATE(A ,
system information Bit Field Type C15BARSTATE) AC15BARSTATE~4 None
NOT_CFG(Not
P00(0%), P05(5%),
P10(10%),
P15(15%),
P20(20%),
P25(25%),
P30(30%),
P40(40%),
P50(50%), P00~0, P05~1,
P60(60%), P10~2, P15~3,
P70(70%), P20~4, P25~5,
P75(75%), P30~6, P40~7,
P80(80%), P50~8, P60~9,
P85(85%), P70~10, P75~11,
Broadcast of P90(90%), P80~12, P85~13,
ACCESS_BARRIN
G_TIME_S4(4s),
ACCESS_BARRIN
s), G_TIME_S64~4,
s), ACCESS_BARRIN
AC11BARSTATE(A
AC12BARSTATE(A ,
AC13BARSTATE(A ,
AC14BARSTATE(A ,
Broadcast of AC15BARSTATE(A ,
system information Bit Field Type C15BARSTATE) AC15BARSTATE~4 None
Cell Outage
Detection and CELL_BARRED(Ba
Compensation rred), CELL_BARRED~0,
Broadcast of CELL_NOT_BARR CELL_NOT_BARR
system information Enumeration Type ED(Not Barred) ED~1 None
CELL_RESERVED(
Reserved), CELL_RESERVED
CELL_NOT_RESE ~0,
Broadcast of RVED(Not CELL_NOT_RESE
system information Enumeration Type Reserved) RVED~1 None
Broadcast of
system information
Cell Selection and ALLOWED, ALLOWED~0,
Re-selection Enumeration Type NOT_ALLOWED NOT_ALLOWED~1 None
RAN Sharing with NORMAL_MODE(N
Common Carrier ormal mode),
Broadcast of RR_MODE(Round NORMAL_MODE~
system information Enumeration Type Robin Mode) 0, RR_MODE~1 None
RAN Sharing with
Common Carrier
Broadcast of
system information Interval Type 1~720 N/A h
2000-01-
01T00:00:00+00:00
RAN Sharing with ~2099-12-
Common Carrier Compound Type 31T23:59:59+00:00 N/A None

Broadcast of
system information
Cell Selection and
Re-selection Interval Type 0~65535 N/A None
CELL_RESERVED
_FOR_OP(Reserve
d), CELL_RESERVED
CELL_NOT_RESE _FOR_OP~0,
Broadcast of RVED_FOR_OP(N CELL_NOT_RESE
system information Enumeration Type ot Reserved) RVED_FOR_OP~1 None
RAN Sharing with
Common Carrier
Broadcast of
system information Interval Type 1~100 N/A %
RAN Sharing with
Common Carrier
Broadcast of
system information Interval Type 1~100 N/A %
CELL_MME_CFG_ CELL_MME_CFG_
NUM_0(0), NUM_0~0,
NUM_1(1), NUM_1~1,
NUM_2(2), NUM_2~2,
NUM_3(3), NUM_3~3,
S1-flex Enumeration Type NUM_4(4) NUM_4~4 None

DB0_Q_HYST(0dB)
,
DB1_Q_HYST(1dB)
,
DB2_Q_HYST(2dB)
,
DB3_Q_HYST(3dB)
,
DB4_Q_HYST(4dB)
,
DB5_Q_HYST(5dB)
, DB0_Q_HYST~0,
DB6_Q_HYST(6dB) DB1_Q_HYST~1,
, DB2_Q_HYST~2,
DB8_Q_HYST(8dB) DB3_Q_HYST~3,
, DB4_Q_HYST~4,
DB10_Q_HYST(10 DB5_Q_HYST~5,
dB), DB6_Q_HYST~6,
dB), DB10_Q_HYST~8,
dB), DB14_Q_HYST~10
DB16_Q_HYST(16 ,
dB), DB16_Q_HYST~11
DB18_Q_HYST(18 ,
dB), DB18_Q_HYST~12
DB20_Q_HYST(20 ,
dB), DB20_Q_HYST~13
Cell Selection and DB22_Q_HYST(22 ,
Re-selection dB), DB22_Q_HYST~14
Broadcast of DB24_Q_HYST(24 ,
system information Enumeration Type dB) DB24_Q_HYST~15 dB
Cell Selection and

Re-selection NOT_CFG(Not
S30_T_EVALULATI S30_T_EVALULATI
ON(30s), ON~0,
S60_T_EVALULATI S60_T_EVALULATI
ON(60s), ON~1,
S120_T_EVALULA S120_T_EVALULA
TION(120s), TION~2,
Broadcast of S180_T_EVALULA S180_T_EVALULA
system information TION(180s), TION~3,
Cell Selection and S240_T_EVALULA S240_T_EVALULA
Re-selection Enumeration Type TION(240s) TION~4 s
S30_T_HYST_NOR S30_T_HYST_NOR
MAL(30s), MAL~0,
S60_T_HYST_NOR S60_T_HYST_NOR
MAL(60s), MAL~1,
S120_T_HYST_NO S120_T_HYST_NO
RMAL(120s), RMAL~2,
Broadcast of S180_T_HYST_NO S180_T_HYST_NO
system information RMAL(180s), RMAL~3,
Cell Selection and S240_T_HYST_NO S240_T_HYST_NO
Re-selection Enumeration Type RMAL(240s) RMAL~4 s
Cell Selection and
Re-selection
Broadcast of
system information Interval Type 1~16 N/A None
Cell Selection and

Re-selection
Broadcast of
DB_6_Q_HYST_SF DB_6_Q_HYST_SF
_MEDIUM(-6dB), _MEDIUM~0,
_MEDIUM(-4dB), _MEDIUM~1,
Broadcast of DB_2_Q_HYST_SF DB_2_Q_HYST_SF
system information _MEDIUM(-2dB), _MEDIUM~2,
Cell Selection and DB0_Q_HYST_SF_ DB0_Q_HYST_SF_
Re-selection Enumeration Type MEDIUM(0dB) MEDIUM~3 dB
_HIGH(-6dB), _HIGH~0,
_HIGH(-4dB), _HIGH~1,
Broadcast of DB_2_Q_HYST_SF DB_2_Q_HYST_SF
system information _HIGH(-2dB), _HIGH~2,
Cell Selection and DB0_Q_HYST_SF_ DB0_Q_HYST_SF_
Re-selection Enumeration Type HIGH(0dB) HIGH~3 dB
Cell Selection and

Cell Selection and
Re-selection
Broadcast of
system information Interval Type 0~31 N/A 2dB
Cell Selection and
Re-selection
Broadcast of
Cell Selection and

Re-selection
Broadcast of
Cell Selection and
Re-selection
Broadcast of
system information Interval Type -70~-22 N/A 2dBm
Cell Selection and

Cell Selection and
Re-selection
Broadcast of
system information Interval Type -30~33 N/A dBm
Cell Selection and

Cell Selection and

Re-selection
Broadcast of
Cell Selection and

MBW6(1.4M), MBW6~0,
MBW15(3M), MBW15~1,
Cell Selection and MBW25(5M), MBW25~2,
Re-selection MBW50(10M), MBW50~3,
Broadcast of MBW75(15M), MBW75~4,
system information Enumeration Type MBW100(20M) MBW100~5 MHz
Cell Selection and

Re-selection
Broadcast of
system information Interval Type 0~7 N/A s
Cell Selection and

T_RESEL_SF_0DO T_RESEL_SF_0DO
T25(0.25), T25~0,
T5(0.5), T5~1,
Cell Selection and T_RESEL_SF_0DO T_RESEL_SF_0DO
Re-selection T75(0.75), T75~2,
Broadcast of T_RESEL_SF_1DO T_RESEL_SF_1DO
system information Enumeration Type T0(1.0) T0~3 None
T25(0.25), T25~0,
T5(0.5), T5~1,
Cell Selection and BitString00(00), BitString00~0,
Re-selection BitString01(01), BitString01~1,
Broadcast of BitString10(10), BitString10~2,
system information Enumeration Type BitString11(11) BitString11~3 None
Cell Selection and BOOLEAN_FALSE( BOOLEAN_FALSE

Re-selection False), ~0,
Broadcast of
system information
Cell Selection and
Re-selection Interval Type 0~31 N/A dB
Broadcast of
system information
Cell Selection and
Broadcast of
system information NOT_CFG(Not
Cell Selection and configure), NOT_CFG~0,
Re-selection Enumeration Type CFG(Configure) CFG~1 None
Broadcast of
system information
Cell Selection and
Broadcast of
Broadcast of
system information
Cell Selection and
Re-selection Interval Type -34~-3 N/A dB
Cell Selection and

Re-selection
CS Fallback to
CDMA2000 1xRTT
Broadcast of
system information
Enhanced CS NOT_CFG(Not
Fallback to configure), NOT_CFG~0,
CDMA2000 1xRTT Enumeration Type CFG(Configure) CFG~1 None
Cell Selection and

Re-selection
Enhanced CS
Fallback to BOOLEAN_FALSE( BOOLEAN_FALSE
CDMA2000 1xRTT False), ~0,
Cell Selection and

Re-selection
CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
Broadcast of
system information
Cell Selection and
Re-selection
CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
Broadcast of
system information
Enhanced CS
Fallback to
Cell Selection and

Re-selection
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000 NOT_CFG(Not
Cell Selection and

Re-selection
PS Inter-RAT
Mobility between E-
UTRAN and
Cell Selection and
Re-selection
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
Broadcast of
Cell Selection and

Re-selection
PS Inter-RAT
Mobility between E-
UTRAN and
PS Inter-RAT T_RESEL_SF_0DO T_RESEL_SF_0DO
Mobility between E- T5(0.5), T5~1,
UTRAN and T_RESEL_SF_0DO T_RESEL_SF_0DO
CDMA2000 T75(0.75), T75~2,

PS Inter-RAT T_RESEL_SF_0DO T_RESEL_SF_0DO
Mobility between E- T5(0.5), T5~1,
UTRAN and T_RESEL_SF_0DO T_RESEL_SF_0DO
CDMA2000 T75(0.75), T75~2,
Cell Selection and

Re-selection
CS Fallback to
CDMA2000 1xRTT
Broadcast of
system information
Cell Selection and
Re-selection
Enhanced CS
Fallback to
CDMA2000 1xRTT NOT_CFG(Not
Cell Selection and

Re-selection
CS Fallback to
CDMA2000 1xRTT
Broadcast of
system information
Cell Selection and
Re-selection
CS Fallback to
CDMA2000 1xRTT
Broadcast of
system information
Enhanced CS
Fallback to
CDMA2000 1xRTT Interval Type 0~7 N/A s
Cell Selection and

Re-selection
CS Fallback to
CDMA2000 1xRTT
Broadcast of
system information
Cell Selection and
Re-selection T_RESEL_SF_0DO T_RESEL_SF_0DO
CS Fallback to T25(0.25), T25~0,
CDMA2000 1xRTT T_RESEL_SF_0DO T_RESEL_SF_0DO
Broadcast of T5(0.5), T5~1,
system information T_RESEL_SF_0DO T_RESEL_SF_0DO
Enhanced CS T75(0.75), T75~2,
Fallback to T_RESEL_SF_1DO T_RESEL_SF_1DO
CDMA2000 1xRTT Enumeration Type T0(1.0) T0~3 None
Cell Selection and

Re-selection T_RESEL_SF_0DO T_RESEL_SF_0DO
CS Fallback to T25(0.25), T25~0,
CDMA2000 1xRTT T_RESEL_SF_0DO T_RESEL_SF_0DO
Broadcast of T5(0.5), T5~1,
system information T_RESEL_SF_0DO T_RESEL_SF_0DO
Enhanced CS T75(0.75), T75~2,
Fallback to T_RESEL_SF_1DO T_RESEL_SF_1DO
CDMA2000 1xRTT Enumeration Type T0(1.0) T0~3 None

Cell Selection and
Re-selection
Broadcast of
Cell Selection and

T25(0.25), T25~0,
T5(0.5), T5~1,
T25(0.25), T25~0,
T5(0.5), T5~1,
Broadcast of
system information
Cell Selection and
Re-selection Interval Type 0~7 N/A s
Cell Selection and
T25(0.25), T25~0,
T5(0.5), T5~1,
T25(0.25), T25~0,
T5(0.5), T5~1,
Cell Selection and

Re-selection
Broadcast of
system information Interval Type -70~-22 N/A 2dBm
Cell Selection and

Re-selection
Broadcast of
Broadcast of
system information
Cell Selection and
Broadcast of
Broadcast of
system information
Cell Selection and

False), ~0,
RF8(8 radio
frames), RF16(16
radio frames),
RF32(32 radio
frames), RF64(64
radio frames),
RF128(128 radio
frames), RF256(256 RF8~0, RF16~1,
radio frames), RF32~2, RF64~3,
Broadcast of RF512(512 radio RF128~4,
system information Enumeration Type frames) RF256~5, RF512~6 None
RF8(8 radio
frames), RF16(16
radio frames),
RF32(32 radio
frames), RF64(64
radio frames),
RF128(128 radio
frames), RF256(256 RF8~0, RF16~1,
RF8(8 radio
frames), RF16(16
radio frames),
RF32(32 radio
frames), RF64(64
radio frames),
RF128(128 radio
frames), RF256(256 RF8~0, RF16~1,
RF8(8 radio
frames), RF16(16
radio frames),
RF32(32 radio
frames), RF64(64
radio frames),
RF128(128 radio
frames), RF256(256 RF8~0, RF16~1,
RF8(8 radio
frames), RF16(16
radio frames),
RF32(32 radio
frames), RF64(64
radio frames),
RF128(128 radio
frames), RF256(256 RF8~0, RF16~1,
RF8(8 radio
frames), RF16(16
radio frames),
RF32(32 radio
frames), RF64(64
radio frames),
RF128(128 radio
frames), RF256(256 RF8~0, RF16~1,
RF8(8 radio
frames), RF16(16
radio frames),
RF32(32 radio
frames), RF64(64
radio frames),
RF128(128 radio
frames), RF256(256 RF8~0, RF16~1,
RF8(8 radio
frames), RF16(16
radio frames),
RF32(32 radio
frames), RF64(64
radio frames),
Earthquake and RF128(128 radio
Tsunami Warning frames), RF256(256 RF8~0, RF16~1,
System (ETWS) radio frames), RF32~2, RF64~3,
RF8(8 radio
frames), RF16(16
radio frames),
RF32(32 radio
frames), RF64(64
radio frames),
Earthquake and RF128(128 radio
Tsunami Warning frames), RF256(256 RF8~0, RF16~1,
System (ETWS) radio frames), RF32~2, RF64~3,
Earthquake and
Tsunami Warning
System (ETWS) Interval Type 1~300 N/A s
Earthquake and
Tsunami Warning MERGE~0,
System (ETWS) Enumeration Type MERGE, DISCARD DISCARD~1 None
Earthquake and
Tsunami Warning MERGE~0,
System (ETWS) Enumeration Type MERGE, DISCARD DISCARD~1 None
RF8(8 radio
frames), RF16(16
radio frames),
RF32(32 radio
frames), RF64(64
radio frames),
RF128(128 radio
frames), RF256(256 RF8~0, RF16~1,
CMAS Support radio frames), RF32~2, RF64~3,
Broadcast of
AL0(0), AL04(0.4),
AL05(0.5),
Uplink Power AL06(0.6), AL0~0, AL04~1,
Control AL07(0.7), AL05~2, AL06~3,
Broadcast of AL08(0.8), AL07~4, AL08~5,
system information Enumeration Type AL09(0.9), AL1(1) AL09~6, AL1~7 None
Uplink Power
Control
Broadcast of
system information Interval Type -127~-96 N/A dBm
Uplink Power
Control
Broadcast of
Uplink Power
Control DELTAF_2(-2dB), DELTAF_2~0,
Broadcast of DELTAF0(0dB), DELTAF0~1,
system information Enumeration Type DELTAF2(2dB) DELTAF2~2 dB
Uplink Power
Control DELTAF1(1dB), DELTAF1~0,
Uplink Power DELTAF_2(-2dB), DELTAF_2~0,

Control DELTAF0(0dB), DELTAF0~1,
Uplink Power
Uplink Power
Uplink Power
Control
Broadcast of
system information Interval Type -1~6 N/A 2dB












None Interval Type -600~500,32767 N/A 0.1dBm


SectorEqmRefType[
None ] 0~8 N/A None

DATA_LINK_AVAIL
ABLE(Data Link
Available), DATA_LINK_AVAIL
DATA_LINK_UNAV ABLE~0,
AILABLE(Data Link DATA_LINK_UNAV
None Enumeration Type Unavailable) AILABLE~1 None
None Interval Type 0~4294967295 N/A us

SF500(500
subframes),
SF750(750
subframes),
SF1280(1280
subframes),
SF1920(1920
SF2560(2560 SF750~1,
SF5120(5120 SF1920~3,
SF10240(10240 SF5120~5,
Broadcast of subframes), SF10240~6,
system information Enumeration Type INFINITY(Infinity) INFINITY~7 None

MS100_T300(100m
s),
MS200_T300(200m
s),
MS300_T300(300m
s),
MS400_T300(400m
s),
MS600_T300(600m MS100_T300~0,
s), MS200_T300~1,
MS1000_T300(100 MS300_T300~2,
0ms), MS400_T300~3,
MS1500_T300(150 MS600_T300~4,
0ms), MS1000_T300~5,
Broadcast of MS2000_T300(200 MS1500_T300~6,
system information Enumeration Type 0ms) MS2000_T300~7 ms
MS100_T301(100m
s),
MS200_T301(200m
s),
MS300_T301(300m
s),
MS400_T301(400m
s),
MS600_T301(600m MS100_T301~0,
s), MS200_T301~1,
MS1000_T301(100 MS300_T301~2,
0ms), MS400_T301~3,
MS1500_T301(150 MS600_T301~4,
0ms), MS1000_T301~5,
MS0_T310(0ms),
MS50_T310(50ms),
MS100_T310(100m
s),
MS200_T310(200m
s), MS0_T310~0,
MS500_T310(500m MS50_T310~1,
s), MS100_T310~2,
MS1000_T310(100 MS200_T310~3,
0ms), MS500_T310~4,
MS1000_T311(100
0ms),
MS3000_T311(300
0ms),
MS5000_T311(500
0ms),
MS10000_T311(10
000ms), MS1000_T311~0,
MS15000_T311(15 MS3000_T311~1,
000ms), MS5000_T311~2,
MS20000_T311(20 MS10000_T311~3,
000ms), MS15000_T311~4,
n1(1), n2(2), n3(3), n1~0, n2~1, n3~2,
Broadcast of n4(4), n5(5), n6(6), n4~3, n5~4, n6~5,
system information Enumeration Type n8(8), n10(10) n8~6, n10~7 None
n1(1), n2(2), n3(3), n1~0, n2~1, n3~2,

Broadcast of n4(4), n6(6), n8(8), n4~3, n6~4, n8~5,
system information Enumeration Type n10(10), n20(20) n10~6, n20~7 None

Character String
Broadcast of BOOLEAN_FALSE( BOOLEAN_FALSE

system information False), ~0,
Cell Selection and BOOLEAN_TRUE( BOOLEAN_TRUE~
Re-selection Enumeration Type True) 1 None
Normal CP NORMAL_CP(Nor
Extended CP mal),
Broadcast of EXTENDED_CP(Ex NORMAL_CP~0,
system information Enumeration Type tended) EXTENDED_CP~1 None
NORMAL_CP(Nor
mal),
Normal CP EXTENDED_CP(Ex NORMAL_CP~0,
Extended CP Enumeration Type tended) EXTENDED_CP~1 None
Cell Selection and

Re-selection
Broadcast of
system information Interval Type 1~43,60~64 N/A None
Cell Selection and
Coverage Based
Intra-frequency
Handover
Cell Selection and
Re-selection
Broadcast of 18000~45589,5443
Broadcast of
system information
Coverage Based
Intra-frequency
Handover
Cell Selection and 0~45589,54436~65
Re-selection Interval Type 535 N/A None
CELL_BW_N6(1.4
M),
CELL_BW_N15(3M
),
CELL_BW_N25(5M
),
CELL_BW_N50(10 CELL_BW_N6~0,
Compact M), CELL_BW_N15~1,
Bandwidth CELL_BW_N75(15 CELL_BW_N25~2,
Broadcast of M), CELL_BW_N50~3,
system information CELL_BW_N100(2 CELL_BW_N75~4,
Scalable Bandwidth Enumeration Type 0M) CELL_BW_N100~5 None
CELL_BW_N6(1.4
M),
CELL_BW_N15(3M
),
CELL_BW_N25(5M
),
CELL_BW_N50(10 CELL_BW_N6~0,
Compact M), CELL_BW_N15~1,
Bandwidth CELL_BW_N75(15 CELL_BW_N25~2,
Broadcast of M), CELL_BW_N50~3,
system information CELL_BW_N100(2 CELL_BW_N75~4,
Scalable Bandwidth Enumeration Type 0M) CELL_BW_N100~5 None
Broadcast of
Compact
Bandwidth
Broadcast of
Broadcast of
CELL_DEACTIVE(
Deactivated),
CELL_ACTIVE(Acti CELL_DEACTIVE~
None Enumeration Type ve) 0, CELL_ACTIVE~1 None
CELL_UNBLOCK(U CELL_UNBLOCK~
nblock), 0,
CELL_HIGH_BLOC CELL_HIGH_BLOC
K(High block), K~1,
CELL_MIDDLE_BL CELL_MIDDLE_BL
OCK(Middle block), OCK~2,
CELL_LOW_BLOC CELL_LOW_BLOC
None Enumeration Type K(Low block) K~3 None

Broadcast of
system information
Basic uplink-
downlink subframe
configuration
uplink-downlink
subframe
configuration
type1&2
uplink-downlink
special subframe
configuration type 7
Optional uplink-
downlink subframe
configuration
uplink-downlink
subframe
uplink-downlink
special subframe
uplink-downlink
special subframe CELL_FDD(FDD), CELL_FDD~0,
configuration type 5 Enumeration Type CELL_TDD(TDD) CELL_TDD~1 None
Broadcast of
system information
Basic uplink-
downlink subframe
configuration
uplink-downlink
subframe
configuration
type1&2
uplink-downlink
special subframe
Optional uplink-
downlink subframe
configuration
uplink-downlink
subframe
configuration type 0 SA0(SA0),
uplink-downlink SA1(SA1),
special subframe SA2(SA2),
configuration type 4 SA3(SA3), SA0~0, SA1~1,
uplink-downlink SA4(SA4), SA2~2, SA3~3,
special subframe SA5(SA5), SA4~4, SA5~5,
configuration type 5 Enumeration Type SA6(SA6) SA6~6 None
Broadcast of
system information
Basic uplink-
downlink subframe
configuration
uplink-downlink
subframe
configuration
type1&2
uplink-downlink
special subframe
Optional uplink-
downlink subframe
configuration
uplink-downlink SSP0(SSP0),
subframe SSP1(SSP1),
configuration type 0 SSP2(SSP2),
uplink-downlink SSP3(SSP3),
special subframe SSP4(SSP4), SSP0~0, SSP1~1,
configuration type 4 SSP5(SSP5), SSP2~2, SSP3~3,
uplink-downlink SSP6(SSP6), SSP4~4, SSP5~5,
special subframe SSP7(SSP7), SSP6~6, SSP7~7,
configuration type 5 Enumeration Type SSP8(SSP8) SSP8~8 None
Coverage Based
Intra-frequency
Handover
Mobility
Management
Coverage Based
Inter-frequency dB-24(-24dB), dB-
Handover 22(-22dB), dB-20(-
Distance Based 20dB), dB-18(-
Inter-frequency 18dB), dB-16(-
Handover 16dB), dB-14(-
Service Based 14dB), dB-12(-
Handover 10dB), dB-8(-8dB),
PS Inter-RAT dB-6(-6dB), dB-5(-
Mobility between E- 5dB), dB-4(-4dB),
UTRAN and dB-3(-3dB), dB-2(-
UTRAN 2dB), dB-1(-1dB),
Service based dB0(0dB), dB-24~0, dB-22~1,
Inter-RAT handover dB1(1dB), dB-20~2, dB-18~3,
to UTRAN dB2(2dB), dB-16~4, dB-14~5,
Distance based dB3(3dB), dB-12~6, dB-10~7,
PS Inter-RAT dB6(6dB), dB-3~12, dB-2~13,
Mobility between E- dB8(8dB), dB-1~14, dB0~15,
UTRAN and dB10(10dB), dB1~16, dB2~17,
GERAN dB12(12dB), dB3~18, dB4~19,
Service based dB14(14dB), dB5~20, dB6~21,
Inter-RAT handover dB16(16dB), dB8~22, dB10~23,
to GERAN dB18(18dB), dB12~24, dB14~25,
Distance based dB20(20dB), dB16~26, dB18~27,
to GERAN Enumeration Type dB24(24dB) dB24~30 dB
Coverage Based
Intra-frequency
Handover
Cell Selection and
Re-selection
Mobility
Management
Coverage Based
Inter-frequency dB-24(-24dB), dB-
Handover 22(-22dB), dB-20(-
Distance Based 20dB), dB-18(-
Handover 16dB), dB-14(-
Service Based 14dB), dB-12(-
Handover 10dB), dB-8(-8dB),
PS Inter-RAT dB-6(-6dB), dB-5(-
Mobility between E- 5dB), dB-4(-4dB),
UTRAN and dB-3(-3dB), dB-2(-
UTRAN 2dB), dB-1(-1dB),
Service based dB0(0dB), dB-24~0, dB-22~1,
Distance based dB3(3dB), dB-12~6, dB-10~7,
PS Inter-RAT dB6(6dB), dB-3~12, dB-2~13,
Mobility between E- dB8(8dB), dB-1~14, dB0~15,
UTRAN and dB10(10dB), dB1~16, dB2~17,
GERAN dB12(12dB), dB3~18, dB4~19,
Service based dB14(14dB), dB5~20, dB6~21,
to GERAN dB18(18dB), dB12~24, dB14~25,
Distance based dB20(20dB), dB16~26, dB18~27,
to GERAN Enumeration Type dB24(24dB) dB24~30 dB
Random Access
Procedure Interval Type 0~837 N/A None
LOW_SPEED(Low
speed cell flag),
HIGH_SPEED(High
speed cell flag),
ULTRA_HIGH_SPE LOW_SPEED~0,
ED(Ultra high HIGH_SPEED~1,
speed cell flag), ULTRA_HIGH_SPE
High Speed Mobility EXTRA_HIGH_SPE ED~2,
Ultra High Speed ED(Extra high EXTRA_HIGH_SPE
Mobility Enumeration Type speed cell flag) ED~3 None
Random Access
1~100000(metric
Random Access system);3~328080(i
Procedure Interval Type mperial system) N/A m(ft)
NOT_CFG(Not
Compact configure), NOT_CFG~0,
Bandwidth Enumeration Type CFG(Configure) CFG~1 None
Compact 48~50,96~100,146
Bandwidth Interval Type ~150,183~200 N/A 0.1MHz
Compact 48~50,96~100,146
Bandwidth Interval Type ~150,183~200 N/A 0.1MHz
Earthquake and
Tsunami Warning
System (ETWS)
CMAS Support NOT_CFG(Not
Earthquake and
Tsunami Warning
System (ETWS)
CMAS Support
Broadcast of
Uplink Power
Control NOT_CFG(Not
Uplink Power
Control
Broadcast of
SFN
Adaptive
SFN/SDMA
Inter-BBP SFN
Inter-BBU SFN
Inter-BBP Adaptive BOOLEAN_FALSE( BOOLEAN_FALSE
SFN/SDMA False), ~0,
Inter-BBU Adaptive BOOLEAN_TRUE( BOOLEAN_TRUE~
SFN/SDMA Enumeration Type True) 1 None
SFN(SFN),
CELL_COMBINATI
ON(Cell
Combination),
TWO_RRU_COMBI SFN~0,
SFN NATION(TWO RRU CELL_COMBINATI
Inter-BBP SFN Combination), ON~1,
Inter-BBP SFN DIGITAL_COMBINA TWO_RRU_COMBI
Inter-BBU SFN TION(Cell Digital NATION~2,
Inter-BBP Adaptive Combination), DIGITAL_COMBINA
SFN/SDMA MPRU_AGGREGA TION~3,
Inter-BBU Adaptive TION(MPRU_AGG MPRU_AGGREGA
SFN/SDMA Enumeration Type REGATION) TION~5 None
NO_COMPRESSIO
N(No
Compression), NO_COMPRESSIO
NORMAL_COMPR N~0,
ESSION(Normal NORMAL_COMPR
None Enumeration Type Compression) ESSION~1 None

False), ~0,
None Enumeration Type True) 1 None
CRS_PORT_1(1
port),
CRS_PORT_2(2
ports), CRS_PORT_1~1,
CRS_PORT_4(4 CRS_PORT_2~2,
None Enumeration Type ports) CRS_PORT_4~4 None
1T1R~0, 1T2R~1,
1T1R, 1T2R, 2T2R, 2T2R~2, 2T4R~3,
None Enumeration Type 2T4R, 4T4R, 8T8R 4T4R~4, 8T8R~5 None
Character String
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support of UE
Category 6
Aggregation for
Downlink 2CC in
30MHz UL_DL(Uplink and
Carrier Aggregation downlink),
for Downlink 2CC in DL_ONLY(Downlink UL_DL~0,
40MHz Enumeration Type only) DL_ONLY~1 None
ACTIVE(Active),
Broadcast of STANDBY(Standby ACTIVE~0,
system information Enumeration Type ) STANDBY~1 None
CELL_INST_UNIN
STALL(Uninstall),
CELL_INST_UEM_
CFGING(Inner
software module
configuring),
CELL_INST_RRU_
CFGING(RRU CELL_INST_UNIN
configuring), STALL~0,
CELL_INST_BBI_C CELL_INST_UEM_
FGING(BBI CFGING~1,
configuring), CELL_INST_RRU_
CELL_INST_RECF CFGING~2,
GING(Recfging), CELL_INST_BBI_C
CELL_INST_DELE FGING~3,
TING(Deleting), CELL_INST_RECF
CELL_INST_NORM GING~4,
AL(Normal), CELL_INST_DELE
CELL_INST_BARR TING~5,
ED(Barred), CELL_INST_NORM
CELL_INST_ALLO AL~6,
CATING_RES(Alloc CELL_INST_BARR
ating resource), ED~7,
CELL_INST_CRM_ CELL_INST_ALLO
CFGING(RRU CATING_RES~8,
configuring), CELL_INST_CRM_
CELL_INST_SFN_ CFGING~9,
RECFGING(SFN CELL_INST_SFN_
Recfging), RECFGING~10,
CELL_INST_RRU_ CELL_INST_RRU_
DPD_TRAINING(R DPD_TRAINING~1
None Enumeration Type RU DPD Training) 1 None
Character String
(141 Cell Setup),
CELL_SETUP_UL CELL_NO_OP~0,
WIDESCAN(UL CELL_SETUP_ACT
Wide Freq Scan ~1,
Cell Setup), CELL_SETUP_UBL
CELL_DEL_BLK_L ~2,
OW(Block Cell CELL_SETUP_HE
Low), ALCHK~3,
CELL_DEL_BLK_M CELL_SETUP_141
ID(Block Cell Mid), ~4,
CELL_DEL_BLK_H CELL_SETUP_UL
IGH(Block Cell WIDESCAN~5,
High), CELL_DEL_BLK_L
CELL_DEL_NOUS OW~26,
ER(Block Cell No CELL_DEL_BLK_M
User), ID~27,
CELL_DEL_DEA(D CELL_DEL_BLK_H
ea Cell), IGH~28,
CELL_DEL_RMV(D CELL_DEL_NOUS
elete Cell), ER~29,
CELl_DEL_HEALC CELL_DEL_DEA~3
HK(Cell Healthy 0,
Chk), CELL_DEL_RMV~3
CELL_DEL_UNHE 1,
AL(Cell UnHealthy), CELl_DEL_HEALC
CELL_DEL_SETUP HK~32,
_FAIL(Cell Setup CELL_DEL_UNHE
Fail), AL~33,
CELL_DEL_141_D CELL_DEL_SETUP
EL(141 Cell Del), _FAIL~34,
CELL_DEL_ULWID CELL_DEL_141_D
ESCAN(UL Wide EL~35,
Freq Scan Cell CELL_DEL_ULWID
Del), ESCAN~36,
CELL_DEL_CELLN CELL_DEL_CELLN
OACCESSALM(Cel OACCESSALM~11
None Enumeration Type l No Access Alarm) 2 None
Character String
(141 Cell Setup),
CELL_SETUP_UL CELL_NO_OP~0,
WIDESCAN(UL CELL_SETUP_ACT
Wide Freq Scan ~1,
Cell Setup), CELL_SETUP_UBL
CELL_DEL_BLK_L ~2,
OW(Block Cell CELL_SETUP_HE
Low), ALCHK~3,
CELL_DEL_BLK_M CELL_SETUP_141
ID(Block Cell Mid), ~4,
CELL_DEL_BLK_H CELL_SETUP_UL
IGH(Block Cell WIDESCAN~5,
High), CELL_DEL_BLK_L
CELL_DEL_NOUS OW~26,
ER(Block Cell No CELL_DEL_BLK_M
User), ID~27,
CELL_DEL_DEA(D CELL_DEL_BLK_H
ea Cell), IGH~28,
CELL_DEL_RMV(D CELL_DEL_NOUS
elete Cell), ER~29,
CELl_DEL_HEALC CELL_DEL_DEA~3
HK(Cell Healthy 0,
Chk), CELL_DEL_RMV~3
CELL_DEL_UNHE 1,
AL(Cell UnHealthy), CELl_DEL_HEALC
CELL_DEL_SETUP HK~32,
_FAIL(Cell Setup CELL_DEL_UNHE
Fail), AL~33,
CELL_DEL_141_D CELL_DEL_SETUP
EL(141 Cell Del), _FAIL~34,
CELL_DEL_ULWID CELL_DEL_141_D
ESCAN(UL Wide EL~35,
Freq Scan Cell CELL_DEL_ULWID
Del), ESCAN~36,
CELL_DEL_CELLN CELL_DEL_CELLN
OACCESSALM(Cel OACCESSALM~11
None Enumeration Type l No Access Alarm) 2 None
Mode-Cell Used
Power Reduced),
CELL_PWRSAVE_
LOWPWR_RSPWR
RDU(Low Power
Consumption
Mode-Reference
Signal Power
Reduced),
CELL_PWRSAVE_
LOWPWR_RFSHD(
Low Power CELL_PWRSAVE_
Consumption UNINSTALL~0,
Mode-RF CELL_PWRSAVE_
Shutdown), RFSHD~1,
CELL_PWRSAVE_ CELL_PWRSAVE_
LOWPWR_CELLS CARRIERPWROFF
HD(Low Power ~2,
Consumption CELL_PWRSAVE_
Mode-Cell LOWPWR_CELLU
Shutdown), SEDPWRRDU~3,
AUTO_PWROFF_R CELL_PWRSAVE_
FSLEEP(RF LOWPWR_RSPWR
Module Regular RDU~4,
Time Sleep Mode), CELL_PWRSAVE_
CELL_PWRSAVE_ LOWPWR_RFSHD
UMTS_CARRIERP ~5,
WROFF(Intelligent CELL_PWRSAVE_
Power-Off of LOWPWR_CELLS
Carriers in the HD~6,
Same Coverage of AUTO_PWROFF_R
UMTS Network FSLEEP~7,
Mode), CELL_PWRSAVE_
CELL_PWRSAVE_ UMTS_CARRIERP
DYNADJVOLT(Dyn WROFF~8,
amic Adjust Voltage CELL_PWRSAVE_
None Enumeration Type Mode) DYNADJVOLT~9 None
Character String
BASIC_TYPE(Basic
Type),
TWO_RRU_COMBI
NATION_TYPE(TW
O RRU
Combination Type),
SFN_TYPE(SFN
Type),
BF_TYPE(BF
Type), BASIC_TYPE~0,
CELL_COMBINATI TWO_RRU_COMBI
ON_TYPE(Cell NATION_TYPE~2,
Combination Type), SFN_TYPE~3,
DIGITAL_COMBINA BF_TYPE~4,
TION_TYPE(Cell CELL_COMBINATI
Digital Combination ON_TYPE~14,
Type), DIGITAL_COMBINA
MPRU_AGGREGA TION_TYPE~15,
TION_TYPE(MPRU MPRU_AGGREGA
Aggregation Type), TION_TYPE~16,
INVALID_TYPE(Inv INVALID_TYPE~25
None Enumeration Type alid Type) 5 None

UNINSTALL(Uninst
all),
SYMBOL_SHUTDO UNINSTALL~0,
WN(Symbol SYMBOL_SHUTDO
None Enumeration Type shutdown) WN~1 None

NORMAL(Normal),
LINK_ABNOMAL(A
bnormal inter-
eNodeB link),
CFGPARA_INVALI
D(Invalid parameter
setting),
RFUNIT_ABNOMA
L(Abnormal RF
module),
LICENSE_NOT_EN
OUGH(Insufficient NORMAL~0,
license), LINK_ABNOMAL~1
CLK_NOT_USABL ,
E(Clock resource is CFGPARA_INVALI
not usable), D~2,
BASEBANDUNIT_ RFUNIT_ABNOMA
ABNORMAL(Fault L~3,
on the LBBP), LICENSE_NOT_EN
DATALINK_ABNOR OUGH~4,
MAL(Faulty link for CLK_NOT_USABL
data services), E~5,
RFUNIT_PROCES BASEBANDUNIT_
SING(RF module ABNORMAL~6,
configuration in DATALINK_ABNOR
progress), MAL~7,
UL_DATA_SYNC_L RFUNIT_PROCES
OSS(UL Data Sync SING~8,
Abnormal), UL_DATA_SYNC_L
UNAVAILABLE(Dis OSS~9,
None Enumeration Type abled) UNAVAILABLE~10 None

None MultiBand[] 0~2 N/A None
Inter-BBU SFN
Inter-BBU Adaptive
SFN/SDMA Interval Type 0~65535 N/A None
Inter-BBU SFN
Inter-BBU Adaptive
SFN/SDMA Interval Type 0~23,255 N/A None
Inter-BBU SFN
Inter-BBU Adaptive
SFN/SDMA Interval Type -600~500,32767 N/A 0.1dBm

Single Streaming SINGLE_LAYER_B SINGLE_LAYER_B

Beamforming F(Single-Layer BF), F~0,
Dual Streaming DUAL_LAYER_BF( DUAL_LAYER_BF~
Beamforming Enumeration Type Dual-Layer BF) 1 None
SUCCESS(Success
),
FAILURE(Failure), SUCCESS~0,
None Enumeration Type NA(NA) FAILURE~1, NA~2 None
SUCCESS(Success
),
SUCCESS(Success
),
SUCCESS(Success
),
SUCCESS(Success
),
SUCCESS(Success
),
SUCCESS(Success
),
SUCCESS(Success
),
SUCCESS(Success
),
SUCCESS(Success
),
Character String
Character String
Character String
Character String
Character String
Character String
Character String
Character String
Character String
Character String
INITIALIZATION(Init
ialization),
PERIOD(Period), INITIALIZATION~0,
None Enumeration Type NA(NA) PERIOD~1, NA~2 None
INITIALIZATION(Init
ialization),
INITIALIZATION(Init
ialization),
INITIALIZATION(Init
ialization),
INITIALIZATION(Init
ialization),
INITIALIZATION(Init
ialization),
INITIALIZATION(Init
ialization),
INITIALIZATION(Init
ialization),
INITIALIZATION(Init
ialization),
INITIALIZATION(Init
ialization),
120ms~0,
240ms~1,
480ms~2,
640ms~3,
Downlink Static 1024ms~4,
Inter-Cell 2048ms~5,
Interference 120ms, 240ms, 5120ms~6,
Coordination 480ms, 640ms, 10240ms~7,
Downlink Dynamic 1024ms, 2048ms, 1min~8, 6min~9,
Inter-Cell 5120ms, 10240ms, 12min~10,
Interference 1min, 6min, 12min, 30min~11,
Coordination Enumeration Type 30min, 60min 60min~12 None
Downlink Static
Inter-Cell
Interference
Coordination
Downlink Dynamic
Inter-Cell
Interference
Coordination Interval Type 1~8 N/A None
Downlink Static
Inter-Cell
Interference
Coordination
Downlink Dynamic r1(1), r2(2), r4(4),
Inter-Cell r8(8), r16(16), r1~0, r2~1, r4~2,
Interference r32(32), r64(64), r8~3, r16~4, r32~5,
Coordination Enumeration Type Infinity(Infinity) r64~6, Infinity~7 None
Downlink Static
Inter-Cell
Interference
Coordination
Downlink Dynamic
Inter-Cell SAME_AS_TRIG_
Interference QUAN(Same as SAME_AS_TRIG_
Coordination Enumeration Type Trig Quan), BOTH QUAN~0, BOTH~1 None
Downlink Static
Inter-Cell
Interference
Coordination
Downlink Dynamic
Inter-Cell
Interference
Coordination Enumeration Type RSRP, RSRQ RSRP~0, RSRQ~1 None
Downlink Static
Inter-Cell
Interference
Coordination
Downlink Dynamic
Inter-Cell
Interference
Coordination Interval Type 0~30 N/A 0.5dB
0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
128ms~5,
160ms~6,
256ms~7,
Downlink Static 0ms, 40ms, 64ms, 320ms~8,
Inter-Cell 80ms, 100ms, 480ms~9,
Downlink Dynamic 480ms, 512ms, 1024ms~12,
Coordination Enumeration Type 5120ms 5120ms~15 None
Downlink Static
Inter-Cell
Interference
Coordination
Downlink Dynamic
Inter-Cell
Interference
Coordination Interval Type -30~30 N/A 0.5dB
Downlink Static
Inter-Cell
Interference
Coordination
Downlink Dynamic
Inter-Cell
Interference

SUBFRAME_ONE_
PER_FIVE(One
ABS per 5 ms),
SUBFRAME_TWO
_PER_FIVE(Two SUBFRAME_ONE_
ABS per 5 ms), PER_FIVE~0,
SUBFRAME_THRE SUBFRAME_TWO
E_PER_FIVE(Thre _PER_FIVE~1,
e ABS per 5 ms), SUBFRAME_THRE
SUBFRAME_FOUR E_PER_FIVE~2,
_PER_FIVE(Four SUBFRAME_FOUR
Static TDM eICIC Enumeration Type ABS per 5 ms) _PER_FIVE~3 None
Low Power
Consumption Mode Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Low Power
Consumption Mode Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Low Power
Consumption Mode Compound Type 00:00:00~23:59:59 N/A None
Low Power
Consumption Mode Compound Type 00:00:00~23:59:59 N/A None
Low Power
Consumption Mode Interval Type 0~1440 N/A min
Low Power
Low Power
Low Power
Consumption Mode Interval Type 10~100 N/A %
Low Power
Consumption Mode Interval Type -10~0 N/A dB
Low Power
CUSTOMIZED(Cus
tomized), CUSTOMIZED~0,
POLICY1(Policy1), POLICY1~1,
Low Power POLICY2(Policy2), POLICY2~2,
Consumption Mode Enumeration Type POLICY3(Policy3) POLICY3~3 None

NOT_CFG(Not
Mobility Robust configure), NOT_CFG~0,
Optimization(MRO) Enumeration Type CFG(Configure) CFG~1 None
dB-24(-24dB), dB-
22(-22dB), dB-20(-
20dB), dB-18(-
18dB), dB-16(-
16dB), dB-14(-
14dB), dB-12(-
12dB), dB-10(-
10dB), dB-8(-8dB),
dB-6(-6dB), dB-5(-
5dB), dB-4(-4dB),
dB-3(-3dB), dB-2(-
2dB), dB-1(-1dB),
dB0(0dB), dB-24~0, dB-22~1,
dB1(1dB), dB-20~2, dB-18~3,
dB2(2dB), dB-16~4, dB-14~5,
dB3(3dB), dB-12~6, dB-10~7,
dB4(4dB), dB-8~8, dB-6~9,
dB5(5dB), dB-5~10, dB-4~11,
dB6(6dB), dB-3~12, dB-2~13,
dB8(8dB), dB-1~14, dB0~15,
dB10(10dB), dB1~16, dB2~17,
dB12(12dB), dB3~18, dB4~19,
dB14(14dB), dB5~20, dB6~21,
dB16(16dB), dB8~22, dB10~23,
dB18(18dB), dB12~24, dB14~25,
dB20(20dB), dB16~26, dB18~27,
Mobility Robust dB22(22dB), dB20~28, dB22~29,
Optimization(MRO) Enumeration Type dB24(24dB) dB24~30 dB
dB-24(-24dB), dB-
22(-22dB), dB-20(-
20dB), dB-18(-
18dB), dB-16(-
16dB), dB-14(-
14dB), dB-12(-
12dB), dB-10(-
10dB), dB-8(-8dB),
dB-6(-6dB), dB-5(-
5dB), dB-4(-4dB),
dB-3(-3dB), dB-2(-
2dB), dB-1(-1dB),
dB0(0dB), dB-24~0, dB-22~1,
dB1(1dB), dB-20~2, dB-18~3,
dB2(2dB), dB-16~4, dB-14~5,
dB3(3dB), dB-12~6, dB-10~7,
dB4(4dB), dB-8~8, dB-6~9,
dB5(5dB), dB-5~10, dB-4~11,
dB6(6dB), dB-3~12, dB-2~13,
dB8(8dB), dB-1~14, dB0~15,
dB10(10dB), dB1~16, dB2~17,
dB12(12dB), dB3~18, dB4~19,
dB14(14dB), dB5~20, dB6~21,
dB16(16dB), dB8~22, dB10~23,
dB18(18dB), dB12~24, dB14~25,
dB20(20dB), dB16~26, dB18~27,
Mobility Robust dB22(22dB), dB20~28, dB22~29,
Optimization(MRO) Enumeration Type dB24(24dB) dB24~30 dB
Admission Control Interval Type 1~15 N/A None

Admission Control Interval Type 10~99 N/A %



Congestion Control Interval Type 0~99 N/A %

Congestion Control Interval Type 1~15 N/A None
Radio/transport
resource pre-
emption Interval Type 1~15 N/A None
Admission Control
Admission Control
Admission Control
Admission Control
RF Channel
Intelligent
Shutdown Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
RF Channel
Intelligent
Shutdown Compound Type 00:00:00~23:59:59 N/A None
RF Channel
Intelligent
Shutdown Compound Type 00:00:00~23:59:59 N/A None
RF Channel
Intelligent
Shutdown Interval Type 0~7 N/A dB
RF Channel
Intelligent
Shutdown Interval Type 0~100 N/A %
RF Channel
Intelligent
RF Channel
Intelligent
RF Channel
Intelligent
DELAY_FOR_30MI
NUTES(Not
entering because
the state is delayed
for 30 minutes),
WRONG_REQ_FO
R_PA_CCE(Not
entering because
the cell bandwidth,
PA value, or CCE
aggregation level
for common
signaling does not
meet requirements),
WRONG_ANTENN
AS_NUM(Not
entering because
the number of
antennas does not UE_CONNECTED_
meet requirements), MOD~0,
POWER_INFSUFFI LOAD_SIMULATIO
CIENT(Not entering N_ENABLED~1,
because the power LCS_ENABLED~2,
is insufficient), RF_INTELLIGENT_
SWITCH_OFF(Not SHUTDOWN~3,
entering because DELAY_FOR_30MI
the switch is turned NUTES~4,
off), OTHERS(Not WRONG_REQ_FO
entering because of R_PA_CCE~5,
other reasons), WRONG_ANTENN
MBSFN_ENABLED AS_NUM~6,
(Not entering POWER_INFSUFFI
because MBSFN CIENT~7,
shutdown switch SWITCH_OFF~8,
and symbol OTHERS~9,
shutdown switch MBSFN_ENABLED
None Enumeration Type are all enabled) ~10 None
SWITCH_TURN_O
FF(The switch is
turned off),
TIME_EXPIRES(Ti
me expires),
UE_ACCESSING(T
here are UEs
accessing the
network),
POWER_INSUFFIC
IENT(The power is
insufficient),
INITIAL_ENTERIN
G(None (Initial SWITCH_TURN_O
entering)), FF~0,
LOAD_SIMULATIO TIME_EXPIRES~1,
N_ENABLE(Load UE_ACCESSING~
simulation is 2,
enabled), POWER_INSUFFIC
LCS_ENABLED(LC IENT~3,
S is enabled), INITIAL_ENTERIN
OTHERS(0ther G~4,
reasons), LOAD_SIMULATIO
MBSFN_ENABLED N_ENABLE~5,
(MBSFN shutdown LCS_ENABLED~6,
switch and symbol OTHERS~7,
shutdown switch MBSFN_ENABLED
None Enumeration Type are all enabled) ~8 None

Basic uplink-
downlink subframe
configuration
uplink-downlink
subframe
configuration
type1&2
uplink-downlink
special subframe
Optional uplink-
downlink subframe
configuration
uplink-downlink
subframe
uplink-downlink
special subframe
uplink-downlink
special subframe
configuration type 5 Interval Type 0~2 N/A None
Basic uplink-
downlink subframe
configuration
uplink-downlink
subframe
configuration
type1&2
uplink-downlink
special subframe
Optional uplink-
downlink subframe
configuration
uplink-downlink
subframe
uplink-downlink
special subframe
uplink-downlink
special subframe
configuration type 5 Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

CellConStaReportS
witch(CellConStaRe
portSwitch),
FPIGTPUSwitch(FP CellConStaReportS
IGTPUSwitch), witch~0,
DSCPRemarkSwitc FPIGTPUSwitch~1,
h(DSCPRemarkSwi DSCPRemarkSwitc
None Bit Field Type tch) h~2 None


Intelligent Power-
Off of Carriers in
the Same Coverage Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Intelligent Power-
Off of Carriers in
the Same Coverage Compound Type 00:00:00~23:59:59 N/A None
Intelligent Power-
Off of Carriers in
the Same Coverage Compound Type 00:00:00~23:59:59 N/A None
Intelligent Power-
Off of Carriers in
the Same Coverage Interval Type 0~100 N/A %
Intelligent Power-
Off of Carriers in
Intelligent Power-
Off of Carriers in
Intelligent Power-
Off of Carriers in
120ms~0,
240ms~1,
480ms~2,
640ms~3,
1024ms~4,
Uplink Static Inter- 2048ms~5,
Cell Interference 120ms, 240ms, 5120ms~6,
Uplink Dynamic 1024ms, 2048ms, 1min~8, 6min~9,
Inter-Cell 5120ms, 10240ms, 12min~10,
Interference 1min, 6min, 12min, 30min~11,
Coordination Enumeration Type 30min, 60min 60min~12 ms
Uplink Static Inter-
Cell Interference
Coordination
Uplink Dynamic
Inter-Cell
Interference
Cell Interference
Coordination
Uplink Dynamic r1(1), r2(2), r4(4),
Inter-Cell r8(8), r16(16), r1~0, r2~1, r4~2,
Interference r32(32), r64(64), r8~3, r16~4, r32~5,
Coordination Enumeration Type Infinity(Infinity) r64~6, Infinity~7 None
Cell Interference
Coordination
Uplink Dynamic
Inter-Cell SAME_AS_TRIG_
Interference QUAN(Same as SAME_AS_TRIG_
Coordination Enumeration Type Trig Quan), BOTH QUAN~0, BOTH~1 None
Cell Interference
Coordination
Uplink Dynamic
Inter-Cell
Interference
Coordination Enumeration Type RSRP, RSRQ RSRP~0, RSRQ~1 None
Cell Interference
Coordination
Uplink Dynamic
Inter-Cell
Interference
Coordination Interval Type 0~30 N/A 0.5dB
0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
128ms~5,
160ms~6,
256ms~7,
0ms, 40ms, 64ms, 320ms~8,
Uplink Static Inter- 80ms, 100ms, 480ms~9,
Cell Interference 128ms, 160ms, 512ms~10,
Uplink Dynamic 480ms, 512ms, 1024ms~12,
Coordination Enumeration Type 5120ms 5120ms~15 ms
Cell Interference
Coordination
Uplink Dynamic
Inter-Cell
Interference

ULSCH_STRATEG
Y_EPF(EPF), ULSCH_STRATEG
ULSCH_STRATEG Y_EPF~0,
Y_MAX_CI(MAX_C ULSCH_STRATEG
Basic Scheduling I), Y_MAX_CI~1,
Dynamic ULSCH_STRATEG ULSCH_STRATEG
Scheduling Y_PF(PF), Y_PF~2,
Enhanced ULSCH_STRATEG ULSCH_STRATEG
Scheduling Enumeration Type Y_RR(RR) Y_RR~3 None
UL Synchronous ADAPTIVE_HARQ_
HARQ SW_ON(On), ADAPTIVE_HARQ_
Basic Scheduling ADAPTIVE_HARQ_ SW_ON~0,
Enhanced SW_OFF(Off), ADAPTIVE_HARQ_
Scheduling ADAPTIVE_HARQ_ SW_OFF~1,
Dynamic SW_SEMI_ON(Se ADAPTIVE_HARQ_
Scheduling Enumeration Type miOn) SW_SEMI_ON~2 None
AMC
UL 64QAM Interval Type 1~99 N/A 0.01
Dynamic
Scheduling Interval Type 0~100 N/A %
Dynamic
Scheduling Interval Type 1~40 N/A ms
Dynamic
Scheduling Interval Type 45~1500 N/A byte
HOPPING_OFF(Ho
pping off),
HOPPING_TYPE1( HOPPING_OFF~0,
Hopping Type 1), HOPPING_TYPE1~
HOPPING_TYPE2( 1,
Hopping Type 2), HOPPING_TYPE2~
Basic Scheduling HOPPING_TYPE2_ 2,
Enhanced RANDOM(Hopping HOPPING_TYPE2_
Scheduling Enumeration Type Type 2 Random) RANDOM~3 None
Admission Control
Dynamic
Scheduling Interval Type 16~15000 N/A bit
Dynamic
Dynamic
Scheduling
Enhanced
Scheduling Interval Type 0~2000 N/A ms
EPF_CAPC_FACT EPF_CAPC_FACT
OR_1(1), OR_1~0,
OR_0DOT01(0.01), OR_0DOT01~1,
OR_0DOT5(0.5), OR_0DOT5~2,
OR_2(2), OR_2~3,
OR_3(3), OR_3~4,
Dynamic EPF_CAPC_FACT EPF_CAPC_FACT
Scheduling Enumeration Type OR_4(4) OR_4~5 None
FS_NONFS_ADAP
TIVE(Fs nonFs
Strategy),
FS_INRANDOM_A FS_NONFS_ADAP
DAPTIVE(Fs TIVE~0,
InRandom FS_INRANDOM_A
None Enumeration Type Strategy) DAPTIVE~1 None











Intelligent Power-
Off of Carriers in
the Same Coverage
of UMTS Network Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Intelligent Power-
Off of Carriers in
the Same Coverage
of UMTS Network Compound Type 00:00:00~23:59:59 N/A None
Intelligent Power-
Off of Carriers in
the Same Coverage
of UMTS Network Compound Type 00:00:00~23:59:59 N/A None
Intelligent Power-
Off of Carriers in
the Same Coverage
of UMTS Network Interval Type 0~5000 N/A None
Intelligent Power-
Off of Carriers in
the Same Coverage
of UMTS Network Interval Type 0~100 N/A %
Intelligent Power-
Off of Carriers in
the Same Coverage
of UMTS Network Interval Type 0~100 N/A %

RachAdjSwitch(Rac
hAdjSwitch),
HoRaSwitch(HoRa
Switch),
UnsyncRaSwitch(U
nsyncRaSwitch), RachAdjSwitch~0,
MaksIdxSwitch(Mak HoRaSwitch~1,
sIdxSwitch), UnsyncRaSwitch~2
BackOffSwitch(Bac , MaksIdxSwitch~3,
RACH Optimization Bit Field Type kOffSwitch) BackOffSwitch~4 None
SrsSubframeRecfS
Physical Channel witch(SrsSubframe SrsSubframeRecfS
Management Bit Field Type RecfSwitch) witch~0 None
PucchSwitch(Pucch
Switch),
PucchFlexCfgSwitc PucchSwitch~0,
Physical Channel h(PucchFlexCfgSwi PucchFlexCfgSwitc
Management Bit Field Type tch) h~1 None
Active Queue
Management
(AQM) Bit Field Type AqmAlgoSwitch AqmAlgoSwitch~0 None
CqiAdjAlgoSwitch(C
qiAdjAlgoSwitch),
StepVarySwitch(Ste
pVarySwitch),
DlVarIBLERtargetS
witch(DlVarIBLERta
rgetSwitch), CqiAdjAlgoSwitch~
TddBundlingCqiAdj 0,
OptSwitch(TddBun StepVarySwitch~1,
dlingCqiAdjOptSwit DlVarIBLERtargetS
ch), witch~2,
TddMultiplexingCqi TddBundlingCqiAdj
AdjOptSwitch(TddM OptSwitch~3,
ultiplexingCqiAdjOp TddMultiplexingCqi
CQI Adjustment Bit Field Type tSwitch) AdjOptSwitch~4 None

DynAdjVoltSwitch(D
Adaptive Power ynamic Adjust DynAdjVoltSwitch~
Consumption Bit Field Type Voltage Switch) 0 None
DlSwitch(dlCacSwit
ch),
UlSwitch(ulCacSwit
ch),
DlPredictSwitch(dlC
acPredictSwitch),
UlPredictSwitch(ulC
acPredictSwitch),
GbrUsageSwitch(G
brUsedPRbCheckS DlSwitch~0,
witch), UlSwitch~1,
DlLdcSwitch(dlLdcS DlPredictSwitch~2,
witch), UlPredictSwitch~3,
UlLdcSwitch(ulLdcS GbrUsageSwitch~4,
Admission Control witch), DlLdcSwitch~5,
Congestion Control RelDrbSwitch(LdcD UlLdcSwitch~6,
Radio/transport rbRelSwitch), RelDrbSwitch~7,
resource pre- PreemptionSwitch( PreemptionSwitch~
emption Bit Field Type PreemptionSwitch) 8 None
IntraFreqMlbSwitch(
IntraFreqMlbSwitch)
,
InterFreqMlbSwitch(
InterFreqMlbSwitch)
,
UtranMlbSwitch(Utr
anMlbSwitch),
GeranMlbSwitch(G
eranMlbSwitch), IntraFreqMlbSwitch
CdmaMlbSwitch(Cd ~0,
maMlbSwitch), InterFreqMlbSwitch
IntraFreqIdleMlbSwi ~1,
tch(IntraFreqIdleMlb UtranMlbSwitch~2,
Switch), GeranMlbSwitch~3,
Intra-LTE Load UtranIdleMlbSwitch( CdmaMlbSwitch~4,
Balancing UtranIdleMlbSwitch) IntraFreqIdleMlbSwi
Inter-RAT Load , tch~5,
Sharing to UTRAN MlbLoadInfoSwitch( UtranIdleMlbSwitch
Inter-RAT Load MlbLoadInfoSwitch) ~6,
Sharing to GERAN , MlbLoadInfoSwitch
Load Balancing InterFreqBlindMlbS ~7,
based on Transport witch(InterFreqBlind InterFreqBlindMlbS
QoS Bit Field Type MlbSwitch) witch~8 None
PdschSpsPcSwitch
Physical Channel PdschSpsPcSwitch, ~0,
Management PhichInnerLoopPcS PhichInnerLoopPcS
Broadcast of witch, witch~1,
system information PdcchPcSwitch, PdcchPcSwitch~2,
Dynamic Downlink EDlMaxTXPwrSwitc EDlMaxTXPwrSwitc
Power Allocation Bit Field Type h h~3 None
CloseLoopSpsSwitc
h, CloseLoopSpsSwitc
InnerLoopPuschSwi h~0,
tch, InnerLoopPuschSwi
PhSinrTarUpdateS tch~1,
witch, PhSinrTarUpdateS
InnerLoopPucchSwi witch~2,
tch, InnerLoopPucchSwi
OiSinrTarUpdateSw tch~3,
itch, OiSinrTarUpdateSw
PowerSavingSwitch itch~4,
Broadcast of , PowerSavingSwitch
system information CloseLoopOptPUS ~5,
Uplink Power CHSwitch(CloseLoo CloseLoopOptPUS
Control Bit Field Type pOptPUSCHSwitch) CHSwitch~6 None
Single Streaming
Beamforming
Dual Streaming
Beamforming Bit Field Type BfSwitch BfSwitch~0 None
FreqSelSwitch(Freq
SelSwitch),
ServiceDiffSwitch(S
erviceDiffSwitch),
SpsSchSwitch(Sps
SchSwitch),
VoIP Semi- MBSFNShutDownS FreqSelSwitch~0,
persistent witch(MBSFNShutD ServiceDiffSwitch~1
Scheduling ownSwitch), , SpsSchSwitch~2,
Dynamic NonGbrBundlingSw MBSFNShutDownS
Scheduling itch(NonGbrBundlin witch~3,
DL Non-GBR gSwitch), NonGbrBundlingSw
Packet Bundling EnAperiodicCqiRpt itch~4,
Symbol Power Switch(EnAperiodic EnAperiodicCqiRpt
Saving Bit Field Type CqiRptSwitch) Switch~5 None
SpsSchSwitch(Sps
SchSwitch),
SinrAdjustSwitch(Si
nrAdjustSwitch),
PreAllocationSwitch
(PreAllocationSwitc
h),
UlVmimoSwitch(UlV
mimoSwitch),
TtiBundlingSwitch(T
tiBundlingSwitch),
ImIcSwitch(ImIcSwit
ch), SpsSchSwitch~0,
SmartPreAllocation SinrAdjustSwitch~1,
Switch(SmartPreAll PreAllocationSwitch
ocationSwitch), ~2,
PuschDtxSwitch(Pu UlVmimoSwitch~3,
schDtxSwitch), TtiBundlingSwitch~
UlIblerAdjustSwitch( 4, ImIcSwitch~5,
UlIblerAdjustSwitch) SmartPreAllocation
, Switch~6,
UlEnhancedFssSwit PuschDtxSwitch~7,
ch(UlEnhancedFss UlIblerAdjustSwitch
VoIP Semi- Switch), ~8,
persistent UlEnhancedSrSchS UlEnhancedFssSwit
Scheduling witch(UlEnhancedS ch~9,
TTI Bundling rSchSwitch), UlEnhancedSrSchS
Dynamic SchedulerCtrlPower witch~10,
Scheduling Switch(SchedulerCt SchedulerCtrlPower
Basic Scheduling Bit Field Type rlPowerSwitch) Switch~11 None
RAN Sharing with

Common Carrier
MOCN Flexible
Priority Based
Camping Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
FreqPriorIFHOSwitc
h(FreqPriorIFHOSw
itch), FreqPriorIFHOSwitc
FreqPriorIFBlindHO h~0,
Switch(FreqPriorIF FreqPriorIFBlindHO
None Bit Field Type BlindHOSwitch) Switch~1 None
MuBfSwitch(MuBfS
MU-Beamforming Bit Field Type witch) MuBfSwitch~0 None
Distance Based
Inter-frequency
Handover
Distance based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to GERAN Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
ACBAR_SWITCH_
DYNAMIC(dynamic
configuration), ACBAR_SWITCH_
ACBAR_SWITCH_ DYNAMIC~0,
STATIC(static ACBAR_SWITCH_
configuration), STATIC~1,
Broadcast of ACBAR_SWITCH_ ACBAR_SWITCH_
system information Enumeration Type DISABLE(Disable) DISABLE~2 None
Intra-eNodeB UL DISABLE(Disable), DISABLE~0,
CoMP Enumeration Type ENABLE(Enable) ENABLE~1 None
UL Interference
Rejection DISABLE(Disable), DISABLE~0,
Combining Enumeration Type ENABLE(Enable) ENABLE~1 None
ADAPTIVE(Adaptiv
e scheduling),
JOINT(Joint ADAPTIVE~0,
None Enumeration Type scheduling) JOINT~1 None
ADAPTIVE(Adaptiv
e scheduling),
JOINT(Joint ADAPTIVE~0,
None Enumeration Type scheduling) JOINT~1 None
Control Channel PucchIrcSwitch, PucchIrcSwitch~0,
IRC Bit Field Type PrachIrcSwitch PrachIrcSwitch~1 None
DynDrxSwitch(Dyn
Dynamic DRX Bit Field Type DrxSwitch) DynDrxSwitch~0 None
High-Mobility-
Triggered Idle Mode
High-Mobility- DISABLE(Disable), DISABLE~0,
Triggered Idle Mode Enumeration Type ENABLE(Enable) ENABLE~1 None
GSM and LTE AvoidGeranInterfSw

Buffer Zone itch(AvoidGeranInte AvoidGeranInterfSw
Optimization(LTE) Bit Field Type rfSwitch) itch~0 None
GSM and LTE
Dynamic Power
Sharing(LTE) Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Static TDM eICIC Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

DlCompSwitch(DlC
None Bit Field Type ompSwitch) DlCompSwitch~0 None
MumimoPuschPsic
Switch(MumimoPus MumimoPuschPsic
Advanced Receiver Bit Field Type chPsicSwitch) Switch~0 None
Intra-LTE Load InterFreqMlbBlindH

Balancing o(InterFreqMlbBlind
Inter-RAT Load Ho), InterFreqMlbBlindH
Sharing to UTRAN InterRatMlbBlindHo o~0,
Inter-RAT Load (InterRatMlbBlindH InterRatMlbBlindHo
Sharing to GERAN Bit Field Type o) ~1 None
Adaptive
SFN/SDMA Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

MODE1(DL band
division scheme
No.1), MODE2(DL
Downlink Static band division
Inter-Cell scheme No.2),
Interference MODE3(DL band
Coordination division scheme
Downlink Dynamic No.3), MODE1~0,
Inter-Cell INVALID(Invalid DL MODE2~1,
Interference band division MODE3~2,
Coordination Enumeration Type scheme) INVALID~255 None
Adaptive Inter-Cell
Interference
Coordination Interval Type -5~15 N/A dB
Adaptive Inter-Cell
Interference

Physical Channel
Management
Dynamic Downlink
Power Allocation Interval Type -150~150 N/A 0.1dB

Dynamic Downlink PA_NEG6(-6dB),
Power Allocation PA_NEG4DOT77(-
Downlink Static 4.77dB),
Inter-Cell PA_NEG3(-3dB),
Interference PA_NEG1DOT77(- PA_NEG6~0,
Coordination 1.77dB), PA_NEG4DOT77~1
Downlink Dynamic PA_0(0dB), , PA_NEG3~2,
Inter-Cell PA_1(1dB), PA_NEG1DOT77~3
Interference PA_2(2dB), , PA_0~4, PA_1~5,
Coordination Enumeration Type PA_3(3dB) PA_2~6, PA_3~7 dB
Dynamic Downlink PA_NEG6(-6dB),
Power Allocation PA_NEG4DOT77(-
Downlink Static 4.77dB),
Inter-Cell PA_NEG3(-3dB),
Interference PA_NEG1DOT77(- PA_NEG6~0,
Coordination 1.77dB), PA_NEG4DOT77~1
Downlink Dynamic PA_0(0dB), , PA_NEG3~2,
Inter-Cell PA_1(1dB), PA_NEG1DOT77~3
Interference PA_2(2dB), , PA_0~4, PA_1~5,
Coordination Enumeration Type PA_3(3dB) PA_2~6, PA_3~7 dB

Dynamic Downlink
Power Allocation Interval Type -150~150 N/A 0.1dB

DLSCH_PRI_TYPE DLSCH_PRI_TYPE
_EPF(EPF), _EPF~0,
DLSCH_PRI_TYPE DLSCH_PRI_TYPE
Basic Scheduling _PF(PF), _PF~1,
Enhanced DLSCH_PRI_TYPE DLSCH_PRI_TYPE
Scheduling _MAX_CI(MAX C/I), _MAX_CI~2,
Dynamic DLSCH_PRI_TYPE DLSCH_PRI_TYPE
Scheduling Enumeration Type _RR(RR) _RR~3 None
SW_MAX_SM_RA SW_MAX_SM_RA
NK_1(Rank1), NK_1~0,
SW_MAX_SM_RA SW_MAX_SM_RA
DL 2x2 MIMO NK_2(Rank2), NK_2~1,
DL 4x2 MIMO SW_MAX_SM_RA SW_MAX_SM_RA
DL 4X4 MIMO Enumeration Type NK_4(Rank4) NK_4~2 None
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support of UE
Category 6
Enhanced BASIC_SCHEDUL
Scheduling E(Basic Schedule), BASIC_SCHEDUL
CQI Adjustment DIFF_SCHEDULE( E~0,
Dynamic differentiation DIFF_SCHEDULE~
Scheduling Enumeration Type schedule) 1 None
Dynamic
OR_1(1), OR_1~0,
OR_0DOT01(0.01), OR_0DOT01~1,
OR_0DOT5(0.5), OR_0DOT5~2,
OR_2(2), OR_2~3,
OR_3(3), OR_3~4,
Dynamic EPF_CAPC_FACT EPF_CAPC_FACT
Scheduling Enumeration Type OR_4(4) OR_4~5 None
Dynamic
ALL_EDGE_USER( ALL_EDGE_USER
Basic Scheduling All Edge User), ~0,
Dynamic PART_EDGE_USE PART_EDGE_USE
Scheduling Enumeration Type R(Part Edge User) R~1 None
EDGE_USER_NO_
PRIO(Edge User EDGE_USER_NO_
Basic Scheduling No Prio), PRIO~0,
Dynamic EDGE_USER_PRI EDGE_USER_PRI
Scheduling Enumeration Type O(Edge User Prio) O~1 None
ROUND_DOWN(R
Basic Scheduling ound Down),
Dynamic ROUND_UP(Round ROUND_DOWN~0,
Scheduling Enumeration Type Up) ROUND_UP~1 None

Intra-LTE Load
Inter-RAT Load
Sharing to UTRAN
Inter-RAT Load
Sharing to GERAN Interval Type 1~100 N/A %
LOAD_EXCHANGE
_PERIOD_1S(1s), LOAD_EXCHANGE
LOAD_EXCHANGE _PERIOD_1S~0,
Intra-LTE Load _PERIOD_10S(10s LOAD_EXCHANGE
Balancing Enumeration Type ) _PERIOD_10S~3 s
Intra-LTE Load
Balancing
Inter-RAT Load
Sharing to UTRAN
Inter-RAT Load
Intra-LTE Load
Balancing
Inter-RAT Load
Sharing to UTRAN
Inter-RAT Load
Inter-RAT Load
Sharing to UTRAN Interval Type 1~100 N/A %
Inter-RAT Load
Sharing to UTRAN Interval Type 1~30 N/A s
Intra-LTE Load
PRB_ONLY(PrbMo
de),
UE_NUMBER_ONL PRB_ONLY~0,
Y(UeNumMode), UE_NUMBER_ONL
PRB_OR_UE_NUM Y~1,
Intra-LTE Load BER(PrbOrUeNum PRB_OR_UE_NUM
Balancing Enumeration Type Mode) BER~2 None
Intra-LTE Load
Balancing Interval Type 1~10000 N/A None
Intra-LTE Load
Intra-LTE Load
Intra-LTE Load
Inter-RAT Load
Sharing to UTRAN Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

Physical Channel CONGREG_LV4, CONGREG_LV4~2,
Management Enumeration Type CONGREG_LV8 CONGREG_LV8~3 None
Physical Channel
Physical Channel
Physical Channel
OFF(Off), ON(On),
Physical Channel ECfiAdaptionON(E OFF~0, ON~1,
Management Enumeration Type CfiAdaptionON) ECfiAdaptionON~2 None
Physical Channel
Physical Channel
AVERAGE(AVERA
GE),
MINUS_3DB_FIXE
D(MINUS_3DB_FIX AVERAGE~0,
ED), MINUS_3DB_FIXE
MINUS_6DB_FIXE D~1,
D(MINUS_6DB_FIX MINUS_6DB_FIXE
None Enumeration Type ED) D~2 None

Physical Channel

Sleeping Cell
Detection Compound Type 00:00:00~23:59:59 N/A None
Sleeping Cell
Detection Compound Type 00:00:00~23:59:59 N/A None
Sleeping Cell
Detection Interval Type 0~72 N/A h
MODE1(UL band
division scheme
No.1), MODE2(UL
band division
Uplink Static Inter- scheme No.2),
Cell Interference MODE3(UL band
Coordination division scheme
Uplink Dynamic No.3), MODE1~1,
Inter-Cell INVALID(Invalid UL MODE2~2,
Interference band division MODE3~3,
Coordination Enumeration Type scheme) INVALID~255 None
GSM and LTE

Buffer Zone
Optimization(LTE) Interval Type 1~10 N/A 2RB
None Interval Type -6~12 N/A dB

TM1(TM1),
TM2(TM2),
TM7(TM7), TM1~0, TM2~1,
None Enumeration Type TM8(TM8) TM7~6, TM8~7 None
None Interval Type 0~100 N/A RB
None Interval Type 0~100 N/A RB
None Interval Type 0~4294967295 N/A 0.01mW
None Interval Type 0~4294967295 N/A 0.01mW

MOD_PERIOD_CO MOD_PERIOD_CO
EFF_N2(2), EFF_N2~0,
Broadcast of MOD_PERIOD_CO MOD_PERIOD_CO
system information Enumeration Type EFF_N16(16) EFF_N16~3 None

Dynamic Downlink
Power Allocation
Broadcast of
system information Interval Type -3175~3175 N/A 0.005dB
Dynamic Downlink
Power Allocation
Broadcast of
Dynamic Downlink
Power Allocation
Broadcast of
Dynamic Downlink
Power Allocation
Broadcast of
Paging
Dynamic Downlink
Power Allocation
Broadcast of
Dynamic Downlink
Power Allocation
Broadcast of
Dynamic Downlink
Power Allocation
LoCation Services
(LCS) Interval Type -3175~3175 N/A 0.005dB

Dynamic Downlink
Power Allocation
Broadcast of
system information Interval Type -600~500 N/A 0.1dBm
Dynamic Downlink
Power Allocation
Broadcast of

DB0_PWR_RAMPI DB0_PWR_RAMPI
NG_STEP(0dB), NG_STEP~0,
Broadcast of DB2_PWR_RAMPI DB2_PWR_RAMPI
system information NG_STEP(2dB), NG_STEP~1,
Random Access DB4_PWR_RAMPI DB4_PWR_RAMPI
Procedure NG_STEP(4dB), NG_STEP~2,
Uplink Power DB6_PWR_RAMPI DB6_PWR_RAMPI
Control Enumeration Type NG_STEP(6dB) NG_STEP~3 dB
DBM_120(-
120dBm),
DBM_118(-
118dBm),
DBM_116(-
116dBm),
DBM_114(-
114dBm),
DBM_112(-
112dBm),
DBM_110(-
110dBm), DBM_120~0,
DBM_108(- DBM_118~1,
108dBm), DBM_116~2,
DBM_106(- DBM_114~3,
106dBm), DBM_112~4,
DBM_104(- DBM_110~5,
104dBm), DBM_108~6,
DBM_102(- DBM_106~7,
102dBm), DBM_104~8,
DBM_100(- DBM_102~9,
Broadcast of 100dBm), DBM_100~10,
system information DBM_98(-98dBm), DBM_98~11,
Random Access DBM_96(-96dBm), DBM_96~12,
Procedure DBM_94(-94dBm), DBM_94~13,
Uplink Power DBM_92(-92dBm), DBM_92~14,
Control Enumeration Type DBM_90(-90dBm) DBM_90~15 dBm
B56_MSG_SIZE_G B56_MSG_SIZE_G
ROUPA(56bits), ROUPA~0,
B144_MSG_SIZE_ B144_MSG_SIZE_
GROUPA(144bits), GROUPA~1,
Broadcast of B208_MSG_SIZE_ B208_MSG_SIZE_
system information GROUPA(208bits), GROUPA~2,
Random Access B256_MSG_SIZE_ B256_MSG_SIZE_
Procedure Enumeration Type GROUPA(256bits) GROUPA~3 bit
Broadcast of
system information
Random Access
Broadcast of NOT_CFG(Not
system information configure), NOT_CFG~0,
RACH Optimization Enumeration Type CFG(Configure) CFG~1 None
Broadcast of
system information
Random Access
Procedure
RACH Optimization Interval Type 0~63 N/A None
N3_PREMB_TRAN
S_MAX(3times),
N4_PREMB_TRAN N3_PREMB_TRAN
S_MAX(4times), S_MAX~0,
N10_PREMB_TRA N8_PREMB_TRAN
NS_MAX(10times), S_MAX~5,
N20_PREMB_TRA N10_PREMB_TRA
NS_MAX(20times), NS_MAX~6,
N50_PREMB_TRA N20_PREMB_TRA
NS_MAX(50times), NS_MAX~7,
N100_PREMB_TR N50_PREMB_TRA
ANS_MAX(100time NS_MAX~8,
Broadcast of s), N100_PREMB_TR
system information N200_PREMB_TR ANS_MAX~9,
Random Access ANS_MAX(200time N200_PREMB_TR
Procedure Enumeration Type s) ANS_MAX~10 None
SF40_MAC_RESO
LUTION_TIMER(40
),
SF48_MAC_RESO
LUTION_TIMER(48 SF40_MAC_RESO
), LUTION_TIMER~4,
SF56_MAC_RESO SF48_MAC_RESO
LUTION_TIMER(56 LUTION_TIMER~5,
Broadcast of ), SF56_MAC_RESO
system information SF64_MAC_RESO LUTION_TIMER~6,
Random Access LUTION_TIMER(64 SF64_MAC_RESO
Procedure Enumeration Type ) LUTION_TIMER~7 subframe
Broadcast of
system information
Random Access

SC0(0), SC1(1), SC0~0, SC1~1,
SC2(2), SC3(3), SC2~2, SC3~3,
SC4(4), SC5(5), SC4~4, SC5~5,
SC6(6), SC7(7), SC6~6, SC7~7,
SC8(8), SC9(9), SC8~8, SC9~9,
SC10(10), SC10~10,
SC11(11), SC11~11,
SC12(12), SC12~12,
Physical Channel SC13(13), SC13~13,
Management Enumeration Type SC14(14) SC14~14 None
False), ~0,
Physical Channel BOOLEAN_TRUE( BOOLEAN_TRUE~
Management Enumeration Type True) 1 None
False), ~0,
Physical Channel BOOLEAN_TRUE( BOOLEAN_TRUE~
Management Enumeration Type True) 1 None
ACCESS_FIRST(A
ccess First),
EXPERIENCE_FIR ACCESS_FIRST~0
ST(Experience ,
First), EXPERIENCE_FIR
EXPERIENCE_EN ST~1,
Physical Channel HANCED(Experien EXPERIENCE_EN
Management Enumeration Type ce Enhanced) HANCED~2 None
BW0(BW0),
BW1(BW1),
BW2(BW2),
BW3(BW3),
BW4(BW4),
BW5(BW5), BW0~0, BW1~1,
BW6(BW6), BW2~2, BW3~3,
BW7(BW7), BW4~4, BW5~5,
INVALID_BANDWI BW6~6, BW7~7,
Physical Channel DTH(Invalid INVALID_BANDWI
Management Enumeration Type bandwidth) DTH~255 None

Physical Channel
Management
Compact
Bandwidth
Broadcast of NORMAL, NORMAL~0,
system information Enumeration Type EXTENDED EXTENDED~1 None
Physical Channel
Management
Compact
Bandwidth ONE_SIXTH~0,
Broadcast of ONE_SIXTH, HALF, HALF~1, ONE~2,
system information Enumeration Type ONE, TWO TWO~3 None

rf32(32 radio
frames), rf64(64
radio frames),
Broadcast of rf128(128 radio
system information frames), rf256(256 rf32~0, rf64~1,
Paging Enumeration Type radio frames) rf128~2, rf256~3 None
FOURT~0,
FOURT, TWOT, TWOT~1, ONET~2,
ONET, HALFT, HALFT~3,
QUARTERT, QUARTERT~4,
ONE_EIGHTT, ONE_EIGHTT~5,
ONE_SIXTEENTHT ONE_SIXTEENTHT
Broadcast of , ~6,
system information ONE_THIRTY_SEC ONE_THIRTY_SEC
Paging Enumeration Type ONDT ONDT~7 None
Paging Interval Type 1~3 N/A None

Broadcast of
INTER_SUB_FRA
ME(Inter), INTER_SUB_FRA
INTRA_AND_INTE ME~0,
Broadcast of R_SUB_FRAME(Int INTRA_AND_INTE
system information Enumeration Type er And Intra) R_SUB_FRAME~1 None
Broadcast of
system information Interval Type 0~98 N/A RB
False), ~0,
Broadcast of
False), ~0,
Broadcast of
False), ~0,
UL 64QAM Enumeration Type True) 1 None
DS1_DELTA_SHIF DS1_DELTA_SHIF
T(ds1), T~0,
DS2_DELTA_SHIF DS2_DELTA_SHIF
T(ds2), T~1,
Physical Channel DS3_DELTA_SHIF DS3_DELTA_SHIF
Management Enumeration Type T(ds3) T~2 None
Physical Channel
Physical Channel
Physical Channel
Management
PUCCH Flexible
Configuration Interval Type 1~24 N/A 2RB

CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to Character String
CDMA2000 1xRTT Type 3 characters N/A None
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
CDMA2000 1xRTT Type 2~3 characters N/A None
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
CS Fallback to
CDMA2000 1xRTT
bc0~0, bc1~1,
bc2~2, bc3~3,
bc4~4, bc5~5,
bc6~6, bc7~7,
bc0, bc1, bc2, bc3, bc8~8, bc9~9,
bc4, bc5, bc6, bc7, bc10~10, bc11~11,
CS Fallback to bc8, bc9, bc10, bc12~12, bc13~13,
CDMA2000 1xRTT bc11, bc12, bc13, bc14~14, bc15~15,
Enhanced CS bc14, bc15, bc16, bc16~16, bc17~17,
Fallback to bc17, bc18, bc19, bc18~18, bc19~19,
CDMA2000 1xRTT Enumeration Type bc20, bc21 bc20~20, bc21~21 None
CS Fallback to
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT BOOLEAN_FALSE( BOOLEAN_FALSE
Enhanced CS False), ~0,
Fallback to BOOLEAN_TRUE( BOOLEAN_TRUE~
CDMA2000 1xRTT Enumeration Type True) 1 None
CS Fallback to
CS Fallback to
CS Fallback to
CS Fallback to
CS Fallback to
CS Fallback to
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
CS Fallback to
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
CS Fallback to
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
CS Fallback to
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
CS Fallback to
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
CDMA2000 1xRTT Enumeration Type NO(NO), YES(YES) NO~0, YES~1 None
CS Fallback to
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
CS Fallback to
CDMA2000 1xRTT
CS Fallback to IMSIS_ESN(IMSI_S
CDMA2000 1xRTT and ESN),
Enhanced CS IMSI(IMSI), IMSIS_ESN~0,
Fallback to IMSI_ESN(IMSI IMSI~2,
CDMA2000 1xRTT Enumeration Type and ESN) IMSI_ESN~3 None
CS Fallback to
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
CDMA2000 1xRTT Enumeration Type NO(NO), YES(YES) NO~0, YES~1 None
CS Fallback to
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
CS Fallback to
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
CS Fallback to
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
CDMA2000 1xRTT Interval Type 0~255 N/A 80ms
CS Fallback to
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
CDMA2000 1xRTT Interval Type 0~255 N/A 100ms

PS Inter-RAT
Mobility between E-
UTRAN and Character String
CDMA2000 Type 3~28 characters N/A None
PS Inter-RAT
Mobility between E-
bc0~0, bc1~1,
bc2~2, bc3~3,
bc4~4, bc5~5,
bc6~6, bc7~7,
bc0, bc1, bc2, bc3, bc8~8, bc9~9,
bc4, bc5, bc6, bc7, bc10~10, bc11~11,
bc8, bc9, bc10, bc12~12, bc13~13,
PS Inter-RAT bc11, bc12, bc13, bc14~14, bc15~15,
Mobility between E- bc14, bc15, bc16, bc16~16, bc17~17,
UTRAN and bc17, bc18, bc19, bc18~18, bc19~19,
CDMA2000 Enumeration Type bc20, bc21 bc20~20, bc21~21 None
PS Inter-RAT
Mobility between E-
UTRAN and
PS Inter-RAT PERMIT_HO_ENU PERMIT_HO_ENU

Mobility between E- M(Permit Ho), M~0,
UTRAN and FORBID_HO_ENU FORBID_HO_ENU
CDMA2000 Enumeration Type M(Forbid Ho) M~1 None
PERMIT_RMV_EN
PS Inter-RAT UM(Permit ANR
Mobility between E- Remove), PERMIT_RMV_EN
UTRAN and FORBID_RMV_EN UM~0,
CDMA2000 UM(Forbid ANR FORBID_RMV_EN
Inter-RAT ANR Enumeration Type Remove) UM~1 None
PS Inter-RAT
Mobility between E- BOOLEAN_FALSE( BOOLEAN_FALSE
UTRAN and False), ~0,
CDMA2000 BOOLEAN_TRUE( BOOLEAN_TRUE~
Inter-RAT ANR Enumeration Type True) 1 None
PS Inter-RAT
Mobility between E-
PS Inter-RAT
Mobility between E-
PS Inter-RAT
Mobility between E- AUTO_MODE(Auto
UTRAN and Mode),
CDMA2000 MANUAL_MODE(M AUTO_MODE~0,
Inter-RAT ANR Enumeration Type anual Mode) MANUAL_MODE~1 None

PS Inter-RAT
Mobility between E-
CDMA2000 Type 3 characters N/A None
PS Inter-RAT
Mobility between E-
PS Inter-RAT BOOLEAN_FALSE( BOOLEAN_FALSE
Mobility between E- False), ~0,
UTRAN and BOOLEAN_TRUE( BOOLEAN_TRUE~
CDMA2000 Enumeration Type True) 1 None
PS Inter-RAT
Mobility between E- NOT_CFG(Not
UTRAN and configure), NOT_CFG~0,
CDMA2000 Enumeration Type CFG(Configure) CFG~1 None
PS Inter-RAT BOOLEAN_FALSE( BOOLEAN_FALSE

Mobility between E- False), ~0,
UTRAN and BOOLEAN_TRUE( BOOLEAN_TRUE~
CDMA2000 Enumeration Type True) 1 None
PS Inter-RAT
Mobility between E-
UTRAN and
PS Inter-RAT
PS Inter-RAT
Mobility between E-
UTRAN and
PS Inter-RAT
PS Inter-RAT
Mobility between E-
UTRAN and

PS Inter-RAT
Mobility between E-
PS Inter-RAT
Mobility between E-
PS Inter-RAT
Mobility between E-
PS Inter-RAT
Mobility between E-
PS Inter-RAT
Mobility between E-
UTRAN and
bc0~0, bc1~1,
bc2~2, bc3~3,
CS Fallback to bc4~4, bc5~5,
CDMA2000 1xRTT bc6~6, bc7~7,
PS Inter-RAT bc0, bc1, bc2, bc3, bc8~8, bc9~9,
Mobility between E- bc4, bc5, bc6, bc7, bc10~10, bc11~11,
CDMA2000 bc11, bc12, bc13, bc14~14, bc15~15,
CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
Enhanced CS
Fallback to
CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
Enhanced CS
Fallback to
CDMA2000 1xRTT Interval Type -15~15 N/A dB
CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
Enhanced CS
Fallback to
CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
Enhanced CS
Fallback to
RAN Sharing with
Common Carrier
RAN Sharing with Character String
Dedicated Carrier Type 3 characters N/A None
RAN Sharing with

Common Carrier
Dedicated Carrier Type 2~3 characters N/A None

RAN Sharing with
Common Carrier
RAN Sharing with
RAN Sharing with

Common Carrier
RAN Sharing with
Common Carrier
RAN Sharing with

Common Carrier
RAN Sharing with
RAN Sharing with

Common Carrier
RAN Sharing with
Dedicated Carrier Interval Type 1~65533,65535 N/A None
RAN Sharing with

Common Carrier
RAN Sharing with
Common Carrier
RAN Sharing with

Common Carrier
RAN Sharing with

Common Carrier
RAN Sharing with
Common Carrier
RAN Sharing with

Common Carrier
RAN Sharing with

Common Carrier
RAN Sharing with
RAN Sharing with
Common Carrier
RAN Sharing with
RAN Sharing with

Common Carrier
RAN Sharing with
Common Carrier
PS Inter-RAT
Mobility between E-
PS Inter-RAT
Mobility between E-
bc0~0, bc1~1,
bc2~2, bc3~3,
bc4~4, bc5~5,
bc6~6, bc7~7,
bc0, bc1, bc2, bc3, bc8~8, bc9~9,
bc4, bc5, bc6, bc7, bc10~10, bc11~11,
bc8, bc9, bc10, bc12~12, bc13~13,
PS Inter-RAT bc11, bc12, bc13, bc14~14, bc15~15,
Mobility between E- bc14, bc15, bc16, bc16~16, bc17~17,
CDMA2000 Enumeration Type bc20, bc21 bc20~20, bc21~21 None
PS Inter-RAT
Mobility between E-
UTRAN and
PS Inter-RAT
Mobility between E-
PS Inter-RAT
Mobility between E-
PS Inter-RAT
Mobility between E-
UTRAN and
PS Inter-RAT
Mobility between E-
PS Inter-RAT
Mobility between E- AUTO_MODE(Auto
UTRAN and Mode),
CDMA2000 MANUAL_MODE(M AUTO_MODE~0,
Enhanced CS
Fallback to
Enhanced CS
Fallback to
bc0~0, bc1~1,
bc2~2, bc3~3,
bc4~4, bc5~5,
bc6~6, bc7~7,
bc0, bc1, bc2, bc3, bc8~8, bc9~9,
bc4, bc5, bc6, bc7, bc10~10, bc11~11,
bc8, bc9, bc10, bc12~12, bc13~13,
bc11, bc12, bc13, bc14~14, bc15~15,
Enhanced CS
Fallback to
Enhanced CS
Fallback to
Enhanced CS
Fallback to
Enhanced CS
CDMA2000 1xRTT Type 3 characters N/A None
Enhanced CS
Enhanced CS
Enhanced CS
Fallback to
Enhanced CS
Enhanced CS AUTO_MODE(Auto
Fallback to Mode),
CDMA2000 1xRTT MANUAL_MODE(M AUTO_MODE~0,
Enhanced CS
Fallback to
Enhanced CS
Fallback to
bc0~0, bc1~1,
bc2~2, bc3~3,
bc4~4, bc5~5,
bc6~6, bc7~7,
bc0, bc1, bc2, bc3, bc8~8, bc9~9,
bc4, bc5, bc6, bc7, bc10~10, bc11~11,
bc8, bc9, bc10, bc12~12, bc13~13,
bc11, bc12, bc13, bc14~14, bc15~15,
Enhanced CS
Fallback to
Enhanced CS
Fallback to
Enhanced CS
Fallback to
PERMIT_HO_ENU PERMIT_HO_ENU
Enhanced CS M(Permit Ho), M~0,
Fallback to FORBID_HO_ENU FORBID_HO_ENU
CDMA2000 1xRTT Enumeration Type M(Forbid Ho) M~1 None
PERMIT_RMV_EN
UM(Permit ANR
Enhanced CS Remove), PERMIT_RMV_EN
Fallback to FORBID_RMV_EN UM~0,
CDMA2000 1xRTT UM(Forbid ANR FORBID_RMV_EN
Enhanced CS BOOLEAN_FALSE( BOOLEAN_FALSE
Fallback to False), ~0,
CDMA2000 1xRTT BOOLEAN_TRUE( BOOLEAN_TRUE~
Enhanced CS
Enhanced CS
Enhanced CS AUTO_MODE(Auto
Fallback to Mode),
CDMA2000 1xRTT MANUAL_MODE(M AUTO_MODE~0,

bc0~0, bc1~1,
bc2~2, bc3~3,
bc4~4, bc5~5,
bc6~6, bc7~7,
Cell Selection and bc0, bc1, bc2, bc3, bc8~8, bc9~9,
Re-selection bc4, bc5, bc6, bc7, bc10~10, bc11~11,
CS Fallback to bc8, bc9, bc10, bc12~12, bc13~13,
CDMA2000 1xRTT bc11, bc12, bc13, bc14~14, bc15~15,
Cell Selection and

Re-selection
CS Fallback to
CDMA2000 1xRTT
Cell Selection and

Re-selection
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
Cell Selection and
Re-selection
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
Cell Selection and

Re-selection
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
Cell Selection and
Re-selection
PS Inter-RAT
Cell Selection and

Re-selection
PS Inter-RAT
Mobility between E-
UTRAN and
Cell Selection and

Re-selection
PS Inter-RAT
Mobility between E-
UTRAN and
Cell Selection and
Re-selection
PS Inter-RAT
Mobility between E-
UTRAN and
PS Inter-RAT
Mobility between E-
GERAN Type 3 characters N/A None
PS Inter-RAT
Mobility between E-
GERAN Type 2~3 characters N/A None
PS Inter-RAT
Mobility between E-
UTRAN and
SRVCC to GERAN
CS Fallback with
LAI to GERAN Interval Type 1~65533,65535 N/A None
PS Inter-RAT
GERAN Enumeration Type CFG(Configure) CFG~1 None
CS Fallback to
GERAN
Flash CS Fallback
to GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
SRVCC to GERAN
CS Fallback to
GERAN
RAT handover to
GERAN
Distance based
inter-RAT handover GSM_dcs1800, GSM_dcs1800~0,
to GERAN Enumeration Type GSM_pcs1900 GSM_pcs1900~1 None
PS Inter-RAT
Mobility between E-
UTRAN and
PS Inter-RAT
Mobility between E-
UTRAN and
PS Inter-RAT
Mobility between E-
UTRAN and
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN DTM_AVAILABLE~
Service based inter- DTM_AVAILABLE, 0,
RAT handover to DTM_NOT_AVAILA DTM_NOT_AVAILA
GERAN Enumeration Type BLE BLE~1 None
PS Inter-RAT
Mobility between E-
False), ~0,
SRVCC to GERAN Enumeration Type True) 1 None
AUTO_MODE(Auto
Mode),
MANUAL_MODE(M AUTO_MODE~0,

PS Inter-RAT
Mobility between E-
GERAN Type 3 characters N/A None
PS Inter-RAT
Mobility between E-
SRVCC to GERAN
Flash CS Fallback
to GERAN
CS Fallback with
LAI to GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN Interval Type 1~65533,65535 N/A None
PS Inter-RAT
Mobility between E-
UTRAN and
PERMIT_RMV_EN
UM(Permit ANR
Remove), PERMIT_RMV_EN
FORBID_RMV_EN UM~0,
UM(Forbid ANR FORBID_RMV_EN

GERAN Enumeration Type M(Forbid Ho) M~1 None
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
SRVCC to GERAN
CS Fallback to
GERAN
Flash CS Fallback
False), ~0,
Automatic Neighbor
Relation (ANR) Character String
Inter-RAT ANR Type 0~99 characters N/A None
Automatic
Neighbour Relation
(ANR) Character String
Inter-RAT ANR Type 0~99 characters N/A None
AUTO_MODE(Auto
Mode),
Character String
Character String
Cell Selection and

Re-selection
PS Inter-RAT
Mobility between E-
UTRAN and
PS Inter-RAT
Mobility between E-
UTRAN and GSM, GPRS, GSM~0, GPRS~1,
GERAN Enumeration Type EDGE EDGE~2 None
Cell Selection and

Re-selection
PS Inter-RAT
Mobility between E-
UTRAN and
Cell Selection and
Re-selection
PS Inter-RAT
Mobility between E-
UTRAN and GSM_dcs1800, GSM_dcs1800~0,
GERAN Enumeration Type GSM_pcs1900 GSM_pcs1900~1 None
Cell Selection and

Reselection / Cell NOT_CFG(Not
Selection and Re- configure), NOT_CFG~0,
selection Enumeration Type CFG(Configure) CFG~1 None
Cell Selection and
Reselection Interval Type 0~7 N/A None
PS Inter-RAT
GERAN Enumeration Type CFG(Configure) CFG~1 None
Cell Selection and
Reselection Interval Type 0~39 N/A dBm
Cell Selection and

Reselection Interval Type 0~45 N/A 2dBm
Cell Selection and
Reselection Interval Type 0~31 N/A 2dB
Cell Selection and
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
SRVCC to GERAN
CS Fallback to
GERAN
Flash CS Fallback
to GERAN Interval Type -15~15 N/A dB
Cell Selection and
Re-selection
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
SRVCC to GERAN
CS Fallback to
GERAN
Flash CS Fallback

Cell Selection and
Re-selection
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
Broadcast of
Cell Selection and

Re-selection
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
Broadcast of
Broadcast of
system information
Coverage Based
Intra-frequency
Cell Selection and

Re-selection
Coverage Based
Intra-frequency Character String
Handover Type 0~99 characters N/A None
n1(n1), n4(n4),
n8(n8), n12(n12),
n16(n16), n24(n24),
n32(n32), n48(n48), n1~0, n4~1, n8~2,
n64(n64), n84(n84), n12~3, n16~4,
Broadcast of n96(n96), n24~5, n32~6,
system information n128(n128), n48~7, n64~8,
Coverage Based n168(n168), n84~9, n96~10,
Intra-frequency n252(n252), n128~11, n168~12,
Handover Enumeration Type n504(n504) n252~13, n504~14 None
Coverage Based
Handover Type 3 characters N/A None
Coverage Based
Coverage Based
Intra-frequency
dB-24(-24dB), dB-
22(-22dB), dB-20(-
20dB), dB-18(-
18dB), dB-16(-
16dB), dB-14(-
14dB), dB-12(-
12dB), dB-10(-
10dB), dB-8(-8dB),
dB-6(-6dB), dB-5(-
5dB), dB-4(-4dB),
dB-3(-3dB), dB-2(-
2dB), dB-1(-1dB),
dB0(0dB), dB-24~0, dB-22~1,
dB1(1dB), dB-20~2, dB-18~3,
dB2(2dB), dB-16~4, dB-14~5,
dB3(3dB), dB-12~6, dB-10~7,
dB4(4dB), dB-8~8, dB-6~9,
dB5(5dB), dB-5~10, dB-4~11,
dB6(6dB), dB-3~12, dB-2~13,
dB8(8dB), dB-1~14, dB0~15,
dB10(10dB), dB1~16, dB2~17,
dB12(12dB), dB3~18, dB4~19,
dB14(14dB), dB5~20, dB6~21,
Coverage Based dB16(16dB), dB8~22, dB10~23,
Intra-frequency dB18(18dB), dB12~24, dB14~25,
Handover dB20(20dB), dB16~26, dB18~27,
Mobility dB22(22dB), dB20~28, dB22~29,
Management Enumeration Type dB24(24dB) dB24~30 dB
dB-24(-24dB), dB-
22(-22dB), dB-20(-
20dB), dB-18(-
18dB), dB-16(-
16dB), dB-14(-
14dB), dB-12(-
12dB), dB-10(-
10dB), dB-8(-8dB),
dB-6(-6dB), dB-5(-
5dB), dB-4(-4dB),
dB-3(-3dB), dB-2(-
2dB), dB-1(-1dB),
dB0(0dB), dB-24~0, dB-22~1,
dB1(1dB), dB-20~2, dB-18~3,
dB2(2dB), dB-16~4, dB-14~5,
dB3(3dB), dB-12~6, dB-10~7,
dB4(4dB), dB-8~8, dB-6~9,
dB5(5dB), dB-5~10, dB-4~11,
dB6(6dB), dB-3~12, dB-2~13,
dB8(8dB), dB-1~14, dB0~15,
dB10(10dB), dB1~16, dB2~17,
dB12(12dB), dB3~18, dB4~19,
dB14(14dB), dB5~20, dB6~21,
dB16(16dB), dB8~22, dB10~23,
dB18(18dB), dB12~24, dB14~25,
Intra-frequency dB22(22dB), dB20~28, dB22~29,
Handover Enumeration Type dB24(24dB) dB24~30 dB
PERMIT_HO_ENU PERMIT_HO_ENU
Coverage Based M(Permit Ho), M~0,
Intra-frequency FORBID_HO_ENU FORBID_HO_ENU
Handover Enumeration Type M(Forbid Ho) M~1 None
PERMIT_RMV_EN
UM(Permit ANR
Automatic FORBID_RMV_EN UM~0,
Neighbour Relation UM(Forbid ANR FORBID_RMV_EN
(ANR) Enumeration Type Remove) UM~1 None
Automatic False), ~0,
Neighbour Relation BOOLEAN_TRUE( BOOLEAN_TRUE~
(ANR) Enumeration Type True) 1 None
Coverage Based
Intra-frequency
Handover
Automatic
Neighbour Relation Character String
(ANR) Type 0~99 characters N/A None
Coverage Based
Intra-frequency
Handover
Automatic
Coverage Based
Intra-frequency
Handover
Distance Based
Inter-frequency
Handover LOW_PRIORITY(L
Service Based ow Priority), LOW_PRIORITY~0
Inter-frequency HIGH_PRIORITY(H ,
Handover Enumeration Type igh Priority) HIGH_PRIORITY~1 None
Physical Channel
Management
Static TDM eICIC Interval Type 0~15 N/A dB
AUTO_MODE(Auto
Automatic Mode),
Neighbour Relation MANUAL_MODE(M AUTO_MODE~0,
(ANR) Enumeration Type anual Mode) MANUAL_MODE~1 None

Coverage Based
Inter-frequency
Handover
Cell Selection and
Re-selection
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
Handover
Mobility between
LTE TDD and LTE 0~45589,54436~65
FDD Interval Type 535 N/A None
Coverage Based
Inter-frequency
Handover
Cell Selection and
Re-selection
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
Handover
Mobility between NOT_CFG(Not
LTE TDD and LTE configure), NOT_CFG~0,
FDD Enumeration Type CFG(Configure) CFG~1 None
Coverage Based
Inter-frequency
Handover
Cell Selection and
Re-selection
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
Handover
Mobility between
LTE TDD and LTE 18000~45589,5443
FDD Interval Type 6~65535 N/A None
NOT_CFG(Not
Cell Selection and
Cell Selection and
Re-selection Interval Type 0~7 N/A s
NOT_CFG(Not
0DOT25_ENUM(0.
25),
0DOT5_ENUM(0.5)
, 0DOT25_ENUM~0,
0DOT75_ENUM(0. 0DOT5_ENUM~1,
Cell Selection and 75), 0DOT75_ENUM~2,
Re-selection Enumeration Type 1DOT0_ENUM(1.0) 1DOT0_ENUM~3 None
0DOT25_ENUM(0.
25),
0DOT5_ENUM(0.5)
, 0DOT25_ENUM~0,
0DOT75_ENUM(0. 0DOT5_ENUM~1,
Cell Selection and 75), 0DOT75_ENUM~2,
Re-selection Enumeration Type 1DOT0_ENUM(1.0) 1DOT0_ENUM~3 None
Coverage Based
Inter-frequency
Handover
Distance Based MBW6(1.4M), MBW6~0,
Inter-frequency MBW15(3M), MBW15~1,
Handover MBW25(5M), MBW25~2,
Service Based MBW50(10M), MBW50~3,
Inter-frequency MBW75(15M), MBW75~4,
Handover Enumeration Type MBW100(20M) MBW100~5 None
dB-24(-24dB), dB-
22(-22dB), dB-20(-
20dB), dB-18(-
18dB), dB-16(-
16dB), dB-14(-
14dB), dB-12(-
12dB), dB-10(-
10dB), dB-8(-8dB),
dB-6(-6dB), dB-5(-
5dB), dB-4(-4dB),
dB-3(-3dB), dB-2(-
2dB), dB-1(-1dB),
dB0(0dB), dB-24~0, dB-22~1,
dB1(1dB), dB-20~2, dB-18~3,
dB2(2dB), dB-16~4, dB-14~5,
dB3(3dB), dB-12~6, dB-10~7,
dB4(4dB), dB-8~8, dB-6~9,
dB5(5dB), dB-5~10, dB-4~11,
dB6(6dB), dB-3~12, dB-2~13,
dB8(8dB), dB-1~14, dB0~15,
dB10(10dB), dB1~16, dB2~17,
dB12(12dB), dB3~18, dB4~19,
dB14(14dB), dB5~20, dB6~21,
dB16(16dB), dB8~22, dB10~23,
dB18(18dB), dB12~24, dB14~25,
dB20(20dB), dB16~26, dB18~27,
Cell Selection and dB22(22dB), dB20~28, dB22~29,
Re-selection Enumeration Type dB24(24dB) dB24~30 dB
Cell Selection and
Cell Selection and

Cell Selection and
Reselection Interval Type -70~-22 N/A 2dBm
NOT_CFG(Not
Reselection Enumeration Type CFG(Configure) CFG~1 None
Cell Selection and
Reselection Interval Type -30~33 N/A dBm
Coverage Based
Inter-frequency
Handover
Cell Selection and
Re-selection
Distance Based
Inter-frequency
Handover BitString00(00), BitString00~0,
Service Based BitString01(01), BitString01~1,
Inter-frequency BitString10(10), BitString10~2,
Handover Enumeration Type BitString11(11) BitString11~3 None
Coverage Based
Inter-frequency
Handover
Cell Selection and
Re-selection
Distance Based
Inter-frequency
Handover BOOLEAN_FALSE( BOOLEAN_FALSE
Service Based False), ~0,
Inter-frequency BOOLEAN_TRUE( BOOLEAN_TRUE~
Handover Enumeration Type True) 1 None
Coverage Based EventA3(EventA3), EventA3~0,

Inter-frequency EventA4(EventA4), EventA4~1,
Handover Enumeration Type EventA5(EventA5) EventA5~2 None
Cell Selection and
Reselection / Cell
Selection and Re-
selection Interval Type 0~31 N/A dB
Cell Selection and
Reselection / Cell
Selection and Re-
Cell Selection and

Cell Selection and
Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency
NOT_ALLOWED(N
Coverage Based OT_ALLOWED),
Inter-frequency ALLOWED(ALLOW NOT_ALLOWED~0
Handover Enumeration Type ED) , ALLOWED~1 None
dB-24(-24dB), dB-
22(-22dB), dB-20(-
20dB), dB-18(-
18dB), dB-16(-
16dB), dB-14(-
14dB), dB-12(-
12dB), dB-10(-
10dB), dB-8(-8dB),
dB-6(-6dB), dB-5(-
5dB), dB-4(-4dB),
dB-3(-3dB), dB-2(-
2dB), dB-1(-1dB),
dB0(0dB), dB-24~0, dB-22~1,
dB1(1dB), dB-20~2, dB-18~3,
dB2(2dB), dB-16~4, dB-14~5,
dB3(3dB), dB-12~6, dB-10~7,
dB4(4dB), dB-8~8, dB-6~9,
dB5(5dB), dB-5~10, dB-4~11,
dB6(6dB), dB-3~12, dB-2~13,
Coverage Based dB8(8dB), dB-1~14, dB0~15,
Inter-frequency dB10(10dB), dB1~16, dB2~17,
Distance Based dB14(14dB), dB5~20, dB6~21,
Service Based dB20(20dB), dB16~26, dB18~27,
AUTO_MODE(Auto
Automatic Mode),

Cell Selection and
Reselection
Coverage Based
Inter-frequency 0~45589,54436~65
Handover Interval Type 535 N/A None
Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
Cell Selection and

Re-selection
Coverage Based
Inter-frequency Character String
n1(n1), n4(n4),
Coverage Based n8(n8), n12(n12),
Inter-frequency n16(n16), n24(n24),
Handover n32(n32), n48(n48), n1~0, n4~1, n8~2,
Distance Based n64(n64), n84(n84), n12~3, n16~4,
Inter-frequency n96(n96), n24~5, n32~6,
Handover n128(n128), n48~7, n64~8,
Service Based n168(n168), n84~9, n96~10,
Inter-frequency n252(n252), n128~11, n168~12,
Handover Enumeration Type n504(n504) n252~13, n504~14 None
Coverage Based
Handover Type 3 characters N/A None
Coverage Based
Coverage Based
Inter-frequency
dB-24(-24dB), dB-
22(-22dB), dB-20(-
20dB), dB-18(-
18dB), dB-16(-
16dB), dB-14(-
14dB), dB-12(-
12dB), dB-10(-
10dB), dB-8(-8dB),
dB-6(-6dB), dB-5(-
5dB), dB-4(-4dB),
dB-3(-3dB), dB-2(-
2dB), dB-1(-1dB),
dB0(0dB), dB-24~0, dB-22~1,
dB1(1dB), dB-20~2, dB-18~3,
dB2(2dB), dB-16~4, dB-14~5,
dB3(3dB), dB-12~6, dB-10~7,
dB4(4dB), dB-8~8, dB-6~9,
dB5(5dB), dB-5~10, dB-4~11,
dB6(6dB), dB-3~12, dB-2~13,
dB8(8dB), dB-1~14, dB0~15,
Distance Based dB14(14dB), dB5~20, dB6~21,
Service Based dB20(20dB), dB16~26, dB18~27,
dB-24(-24dB), dB-
22(-22dB), dB-20(-
20dB), dB-18(-
18dB), dB-16(-
16dB), dB-14(-
14dB), dB-12(-
12dB), dB-10(-
10dB), dB-8(-8dB),
dB-6(-6dB), dB-5(-
5dB), dB-4(-4dB),
dB-3(-3dB), dB-2(-
2dB), dB-1(-1dB),
dB0(0dB), dB-24~0, dB-22~1,
dB1(1dB), dB-20~2, dB-18~3,
dB2(2dB), dB-16~4, dB-14~5,
dB3(3dB), dB-12~6, dB-10~7,
dB4(4dB), dB-8~8, dB-6~9,
dB5(5dB), dB-5~10, dB-4~11,
dB6(6dB), dB-3~12, dB-2~13,
dB8(8dB), dB-1~14, dB0~15,
dB10(10dB), dB1~16, dB2~17,
dB12(12dB), dB3~18, dB4~19,
dB14(14dB), dB5~20, dB6~21,
dB16(16dB), dB8~22, dB10~23,
dB18(18dB), dB12~24, dB14~25,
dB20(20dB), dB16~26, dB18~27,
Cell Selection and dB22(22dB), dB20~28, dB22~29,
Re-selection Enumeration Type dB24(24dB) dB24~30 dB
Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
Handover PERMIT_HO_ENU PERMIT_HO_ENU
Cell Outage M(Permit Ho), M~0,
Detection and FORBID_HO_ENU FORBID_HO_ENU
Compensation Enumeration Type M(Forbid Ho) M~1 None
Automatic PERMIT_RMV_EN
Neighbour Relation UM(Permit ANR
(ANR) Remove), PERMIT_RMV_EN
Cell Outage FORBID_RMV_EN UM~0,
Detection and UM(Forbid ANR FORBID_RMV_EN
Compensation Enumeration Type Remove) UM~1 None
Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency
Handover
Mobility between
LTE TDD and LTE
FDD Interval Type 0~32 N/A None
Automatic False), ~0,
Neighbour Relation BOOLEAN_TRUE( BOOLEAN_TRUE~
(ANR) Enumeration Type True) 1 None
Coverage Based
Inter-frequency
Handover
Automatic Neighbor Character String
Relation (ANR) Type 0~99 characters N/A None
Coverage Based
Inter-frequency
Handover
Automatic
Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
Handover LOW_PRIORITY(L
Mobility between ow Priority), LOW_PRIORITY~0
LTE TDD and LTE HIGH_PRIORITY(H ,
FDD Enumeration Type igh Priority) HIGH_PRIORITY~1 None
AUTO_MODE(Auto
Automatic Mode),
RAN Sharing with

Common Carrier
RAN Sharing with
Dedicated Carrier
Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
Handover
Mobility between
LTE TDD and LTE Character String
FDD Type 3 characters N/A None
RAN Sharing with
Common Carrier
RAN Sharing with
Dedicated Carrier
Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
Handover
Mobility between
LTE TDD and LTE Character String
FDD Type 2~3 characters N/A None

Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
RAN Sharing with

Common Carrier
RAN Sharing with
Dedicated Carrier
Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
Handover
Mobility between
LTE TDD and LTE 0~45589,54436~65
FDD Interval Type 535 N/A None
Coverage Based
Intra-frequency
Handover
Coverage Based NOT_CFG(Not
Inter-frequency configure), NOT_CFG~0,
Handover Enumeration Type CFG(Configure) CFG~1 None
18000~45589,5443
Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
Cell Selection and
Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Coverage Based
Intra-frequency
Handover
Coverage Based

AUTO_MODE(Auto
Automatic Mode),

bc0~0, bc1~1,
bc2~2, bc3~3,
CS Fallback to bc4~4, bc5~5,
CDMA2000 1xRTT bc6~6, bc7~7,
PS Inter-RAT bc0, bc1, bc2, bc3, bc8~8, bc9~9,
Mobility between E- bc4, bc5, bc6, bc7, bc10~10, bc11~11,
CDMA2000 bc11, bc12, bc13, bc14~14, bc15~15,
MOCN Flexible bc14, bc15, bc16, bc16~16, bc17~17,
Priority Based bc17, bc18, bc19, bc18~18, bc19~19,
Camping Enumeration Type bc20, bc21 bc20~20, bc21~21 None
CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
MOCN Flexible
Priority Based
Camping Interval Type 0~5 N/A None
CS Fallback to
CDMA2000 1xRTT
S1-flex
MOCN Flexible NOT_CFG(Not
Priority Based configure), NOT_CFG~0,
Camping Enumeration Type CFG(Configure) CFG~1 None
CS Fallback to
CDMA2000 1xRTT
S1-flex
MOCN Flexible
Priority Based
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
MOCN Flexible
Priority Based

RAN Sharing with
Common Carrier
MOCN Flexible
Priority Based 0~45589,54436~65
Camping Interval Type 535 N/A None
RAN Sharing with

Common Carrier
MOCN Flexible
Priority Based Character String
Camping Type 3 characters N/A None
RAN Sharing with

Common Carrier
MOCN Flexible
Camping Type 2~3 characters N/A None
RAN Sharing with
Common Carrier
Cell Selection and
Re-selection
RAN Sharing with

Common Carrier
Cell Selection and
Re-selection
MOCN Flexible
Priority Based

MOCN Flexible
Priority Based 0~45589,54436~65
Camping Interval Type 535 N/A None
MOCN Flexible
Priority Based
MOCN Flexible
Priority Based
Camping NOT_CFG(Not
MOCN Flexible
Priority Based
Camping
Cell Selection and

MOCN Flexible
Priority Based
MOCN Flexible
Priority Based
MOCN Flexible
Priority Based
Camping NOT_CFG(Not
MOCN Flexible
Priority Based
Camping
Cell Selection and

RAN Sharing with
Common Carrier
MOCN Flexible
Priority Based
RAN Sharing with

Common Carrier
MOCN Flexible
RAN Sharing with
Common Carrier
MOCN Flexible
RAN Sharing with

Common Carrier
Cell Selection and
Re-selection
RAN Sharing with
Common Carrier
Cell Selection and
Re-selection
MOCN Flexible
Priority Based

PS Inter-RAT
Mobility between E-
PS Inter-RAT
Mobility between E-
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
Flash CS Fallback
Flash CS Fallback
to UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and

UTRAN Enumeration Type M(Forbid Ho) M~1 None
PERMIT_RMV_EN
UM(Permit ANR
FORBID_RMV_EN UM~0,
UM(Forbid ANR FORBID_RMV_EN
False), ~0,
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
SRVCC to UTRAN
CS Fallback to
UTRAN
Flash CS Fallback
to UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
E-UTRAN to
UTRAN CS/PS
steering Interval Type 0~32 N/A None
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
SRVCC to UTRAN
CS Fallback to
UTRAN
Flash CS Fallback
to UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN LOW_PRIORITY(L
E-UTRAN to ow Priority), LOW_PRIORITY~0
UTRAN CS/PS HIGH_PRIORITY(H ,
steering Enumeration Type igh Priority) HIGH_PRIORITY~1 None
PS Inter-RAT
Mobility between E-
PS Inter-RAT
Mobility between E-
AUTO_MODE(Auto
Mode),
Character String
Character String
Character String
Character String
Normal~0,
Normal, overload, overload~1,
None Enumeration Type congestion congestion~2 None
MOCN Flexible
Priority Based
MOCN Flexible
Priority Based
MOCN Flexible
Priority Based
Camping NOT_CFG(Not
MOCN Flexible
Priority Based
Camping
Cell Selection and
RAN Sharing with

Common Carrier
MOCN Flexible
Priority Based
RAN Sharing with
Common Carrier
MOCN Flexible
RAN Sharing with

Common Carrier
MOCN Flexible
RAN Sharing with

Common Carrier
Cell Selection and
Re-selection
RAN Sharing with
Common Carrier
Cell Selection and
Re-selection
MOCN Flexible
Priority Based

Cell Selection and
Re-selection
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
Broadcast of
system information
E-UTRAN to
UTRAN CS/PS
Cell Selection and
Re-selection
E-UTRAN to
UTRAN CS/PS R99, HSDPA, R99~0, HSDPA~1,
steering Enumeration Type HSUPA, HSPA HSUPA~2, HSPA~3 None
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN UTRAN_FDD, UTRAN_FDD~0,
Inter-RAT ANR Enumeration Type UTRAN_TDD UTRAN_TDD~1 None
Cell Selection and
Re-selection
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
E-UTRAN to NOT_CFG(Not
UTRAN CS/PS configure), NOT_CFG~0,
steering Enumeration Type CFG(Configure) CFG~1 None
Cell Selection and
Re-selection
PS Inter-RAT
Mobility between E-
UTRAN and
Cell Selection and

Cell Selection and
Re-selection
Broadcast of
system information
Cell Selection and

Reselection Interval Type -50~33 N/A dBm
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
SRVCC to UTRAN
CS Fallback to
UTRAN
Flash CS Fallback
to UTRAN Interval Type -15~15 N/A dB
Cell Selection and

Reselection / Cell
Selection and Re-
selection Interval Type -24~0 N/A dB
Cell Selection and
Reselection / Cell
Selection and Re-
selection Interval Type -60~-13 N/A 2dBm
Cell Selection and
Cell Selection and
Cell Selection and
Reselection / Cell
Selection and Re-
Cell Selection and
Reselection / Cell
Selection and Re-
Priority_0(Priority
0),
Priority_1(Priority
1),
Priority_2(Priority
2),
Priority_3(Priority
3),
Priority_4(Priority
4),
Priority_5(Priority
5),
Priority_6(Priority
6),
Priority_7(Priority
7),
Priority_8(Priority
8), Priority_0~0,
Priority_9(Priority Priority_1~1,
9), Priority_2~2,
10), Priority_4~4,
11), Priority_6~6,
12), Priority_8~8,
PS Inter-RAT 13), Priority_10~10,
Mobility between E- Priority_14(Priority Priority_11~11,
UTRAN and 14), Priority_12~12,
UTRAN Priority_15(Priority Priority_13~13,
E-UTRAN to 15), Priority_14~14,
UTRAN CS/PS Priority_16(Priority Priority_15~15,
steering Enumeration Type 16) Priority_16~16 None
Priority_0(Priority
0),
Priority_1(Priority
1),
Priority_2(Priority
2),
Priority_3(Priority
3),
Priority_4(Priority
4),
Priority_5(Priority
5),
Priority_6(Priority
6),
Priority_7(Priority
7),
Priority_8(Priority
8), Priority_0~0,
9), Priority_2~2,
10), Priority_4~4,
11), Priority_6~6,
Steering 13), Priority_10~10,
CS Fallback to Priority_14(Priority Priority_11~11,
UTRAN 14), Priority_12~12,
Flash CS Fallback Priority_15(Priority Priority_13~13,
to UTRAN 15), Priority_14~14,
CS Fallback Priority_16(Priority Priority_15~15,
Steering to UTRAN Enumeration Type 16) Priority_16~16 None
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
SRVCC to UTRAN
CS Fallback to
UTRAN
Flash CS Fallback
to UTRAN
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
E-UTRAN to
UTRAN CS/PS
Priority_0(Priority
0),
Priority_1(Priority
1),
Priority_2(Priority
2),
Priority_3(Priority
3),
Priority_4(Priority
4),
Priority_5(Priority
5),
Priority_6(Priority
6),
Priority_7(Priority
7),
Priority_8(Priority
8), Priority_0~0,
9), Priority_2~2,
CS Fallback 10), Priority_4~4,
Steering to UTRAN Priority_11(Priority Priority_5~5,
PS Inter-RAT 11), Priority_6~6,
Mobility between E- Priority_12(Priority Priority_7~7,
UTRAN and 12), Priority_8~8,
CS Fallback to 13), Priority_10~10,
Flash CS Fallback 14), Priority_12~12,
to UTRAN Priority_15(Priority Priority_13~13,
steering Enumeration Type 16) Priority_16~16 None
PS Inter-RAT
Mobility between E-
PS Inter-RAT
Mobility between E-
Flash CS Fallback
PS Inter-RAT
Mobility between E-
UTRAN and
PS Inter-RAT
Mobility between E-
UTRAN and
PS Inter-RAT
UTRAN Enumeration Type CFG(Configure) CFG~1 None
PS Inter-RAT
Mobility between E-
UTRAN and UTRAN_FDD, UTRAN_FDD~0,
UTRAN Enumeration Type UTRAN_TDD UTRAN_TDD~1 None
PS Inter-RAT
UTRAN Enumeration Type CFG(Configure) CFG~1 None
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
CS Fallback to
GERAN
Flash CS Fallback
to UTRAN
CS Fallback to
UTRAN
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
E-UTRAN to
UTRAN CS/PS
PS Inter-RAT
Mobility between E-
UTRAN and
SRVCC to UTRAN
CS Fallback with
LAI to UTRAN
E-UTRAN to
UTRAN CS/PS
steering Interval Type 1~65533,65535 N/A None
PS Inter-RAT
Mobility between E-
SRVCC to UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN BOOLEAN_FALSE( BOOLEAN_FALSE
E-UTRAN to False), ~0,
UTRAN CS/PS BOOLEAN_TRUE( BOOLEAN_TRUE~
steering Enumeration Type True) 1 None

AUTO_MODE(Auto
Mode),
Automatic
Neighbour Relation
(ANR) Interval Type 0~100 N/A %
Automatic
Neighbour Relation
(ANR) Interval Type 0~100 N/A %
Automatic
Neighbour Relation
(ANR) Interval Type 1~10000 N/A None
Automatic
Neighbour Relation
(ANR) Interval Type 1~10080 N/A min
Automatic r1(1), r2(2), r4(4),

Neighbour Relation r8(8), r16(16), r1~0, r2~1, r4~2,
(ANR) r32(32), r64(64), r8~3, r16~4, r32~5,
Inter-RAT ANR Enumeration Type Infinity(Infinity) r64~6, Infinity~7 None
120ms~0,
240ms~1,
480ms~2,
640ms~3,
1024ms~4,
2048ms~5,
120ms, 240ms, 5120ms~6,
480ms, 640ms, 10240ms~7,
Automatic 1024ms, 2048ms, 1min~8, 6min~9,
Neighbour Relation 5120ms, 10240ms, 12min~10,
(ANR) 1min, 6min, 12min, 30min~11,
Inter-RAT ANR Enumeration Type 30min, 60min 60min~12 None
Automatic
Neighbour Relation
(ANR)
Inter-RAT ANR Interval Type 1~10080 N/A min
Automatic
Neighbour Relation
(ANR) Interval Type -130~-70 N/A dBm
Automatic
Neighbour Relation
Inter-RAT ANR Interval Type 1~200 N/A None
Automatic
Neighbour Relation

Automatic
Neighbour Relation FREE(FREE),
(ANR) CONTROLLED(CO FREE~0,
Inter-RAT ANR Enumeration Type NTROLLED) CONTROLLED~1 None
Automatic
Neighbour Relation
(ANR)
Inter-RAT ANR Interval Type 1~50400 N/A min
Automatic
Neighbour Relation
(ANR)
PCI Collision
Detection & Self-
Optimization Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
PCI Collision
Detection & Self-
Optimization Compound Type 00:00:00~23:59:59 N/A None
PCI Collision
Detection & Self-
Optimization Compound Type 00:00:00~23:59:59 N/A None
Inter-RAT ANR Interval Type -120~-25 N/A dBm

Inter-RAT ANR Interval Type -110~-48 N/A dBm
Inter-RAT ANR Interval Type -63~0 N/A 0.5dB
Inter-RAT ANR Interval Type -63~0 N/A 0.5dB

NCL_MODE(NCL
Mode),
Automatic NCL_NRT_MODE( NCL_MODE~0,
Neighbour Relation NCL and NRT NCL_NRT_MODE~
(ANR) Enumeration Type Mode) 1 None

Andrew(Andrew),
TongYu(TongYu),
HaiTian(HaiTian),
COMBA(COMBA),
TTCOM(TTCOM), Andrew~0,
MOBI(MOBI), TongYu~1,
GUOXIN(GUOXIN), HaiTian~2,
JIESAI(JIESAI), COMBA~3,
OtherManufacturer TTCOM~4,
1(OtherManufactur MOBI~5,
er1), GUOXIN~6,
OtherManufacturer JIESAI~7,
2(OtherManufactur OtherManufacturer
er2), 1~8,
OtherManufacturer OtherManufacturer
3(OtherManufactur 2~9,
er3), OtherManufacturer
HuaweiAgisson(Hu 3~10,
aweiAgisson), HuaweiAgisson~11,
ShengLu(ShengLu) ShengLu~12,
None Enumeration Type , HongXin(HongXin) HongXin~13 None
Remote Electrical
Tilt Control Interval Type 0 N/A None
Remote Electrical
Remote Electrical
Tilt Control Interval Type 0 N/A None

None Interval Type 30,65,90,360 N/A degree

INTELLIGENT, INTELLIGENT~1,
None Enumeration Type DISTRIBUTED DISTRIBUTED~2 None
SINGLE~1,
None Enumeration Type SINGLE, DUAL DUAL~2 None
Remote Electrical
FOURPORTS(Four
Ports),
EIGHTPORTS(Eigh FOURPORTS~0,
None Enumeration Type t Ports) EIGHTPORTS~1 None
Remote Electrical
Tilt Control Interval Type 0~100 N/A 0.01
Remote Electrical
Tilt Control Interval Type -180~180 N/A degree
Remote Electrical
Remote Electrical
Remote Electrical
Remote Electrical
Remote Electrical
Remote Electrical
Remote Electrical
Remote Electrical
Remote Electrical
Remote Electrical
65535~429496729
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support of UE
Category 6
Carrier Aggregation
for Downlink 2CC in
30MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Multi-SA Carrier
Aggregation for
Downlink 2CC Interval Type 0~17 N/A None
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support of UE
Category 6
Carrier Aggregation
for Downlink 2CC in FDD(FDD),
30MHz TDD_SAME_SA(Sa
Carrier Aggregation me Subframe
for Downlink 2CC in Assignment in
40MHz TDD),
Multi-SA Carrier TDD_DIFF_SA(Diff FDD~0,
Aggregation for erent Subframe TDD_SAME_SA~1,
Downlink 2CC Enumeration Type Assignment in TDD) TDD_DIFF_SA~2 None
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support of UE
Category 6
Carrier Aggregation
for Downlink 2CC in
30MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Multi-SA Carrier
Aggregation for
Downlink 2CC Interval Type 0~17 N/A None
False), ~0,
2000-01-
01T00:00:00+00:00
Broadcast of ~2099-12-
system information Compound Type 31T23:59:59+00:00 N/A None
Broadcast of
system information Interval Type 1~365 N/A day
License
License
License
License










Flash CS Fallback InterPlmnHoSwitch( ,
to UTRAN InterPlmnHoSwitch) Cdma1xRttCsfbSwit
Flash CS Fallback , ch~4,
to GERAN UtranFlashCsfbSwit UtranServiceHoSwit
CS Fallback ch(UtranFlashCsfb ch~5,
Steering to UTRAN Switch), GeranServiceHoSw
CS Fallback GeranFlashCsfbSwi itch~6,
Steering to GERAN tch(GeranFlashCsfb CdmaHrpdServiceH
Enhanced CS Switch), oSwitch~7,
Fallback to ServiceBasedInterF Cdma1xRttService
CDMA2000 1xRTT reqHoSwitch(Servic HoSwitch~8,
PS Inter-RAT eBasedInterFreqHo UlQualityInterRATH
Mobility between E- Switch), oSwitch~9,
UTRAN and UlQualityInterFreqH InterPlmnHoSwitch
UTRAN oSwitch(UlQualityIn ~10,
PS Inter-RAT terFreqHoSwitch), UtranFlashCsfbSwit
Mobility between E- CsfbAdaptiveBlindH ch~11,
UTRAN and oSwitch(CsfbAdapti GeranFlashCsfbSwi
GERAN veBlindHoSwitch), tch~12,
Service based inter- UtranCsfbSteeringS ServiceBasedInterF
RAT handover to witch(UtranCsfbSte reqHoSwitch~13,
UTRAN eringSwitch), UlQualityInterFreqH
Service based inter- GeranCsfbSteering oSwitch~14,
RAT handover to Switch(GeranCsfbS CsfbAdaptiveBlindH
GERAN teeringSwitch), oSwitch~15,
Distance based CSFBLoadInfoSwit UtranCsfbSteeringS
inter-RAT handover ch(CSFBLoadInfoS witch~16,
to UTRAN witch), GeranCsfbSteering
Distance based Cdma1XrttEcsfbSwi Switch~17,
inter-RAT handover tch(Cdma1XrttEcsfb CSFBLoadInfoSwit
to GERAN Switch), ch~18,
Mobility EmcBlindHoA1Swit Cdma1XrttEcsfbSwi
Management ch(EmcBlindHoA1S tch~19,
Coverage Based witch), EmcBlindHoA1Swit
Inter-frequency EmcInterFreqBlind ch~20,
Handover HoSwitch(EmcInter EmcInterFreqBlind
SRVCC to UTRAN Bit Field Type FreqBlindHoSwitch) HoSwitch~21 None
CdmaHrpdNonOtpi EutranVoipCapSwit
misedHoSwitch(Cd ch~0,
maHrpdNonOtpimis UtranVoipCapSwitc
SRVCC to UTRAN edHoSwitch), h~1,
SRVCC to GERAN CdmaHrpdOptimise GeranVoipCapSwitc
CS Fallback to dHoSwitch(CdmaHr h~2,
UTRAN pdOptimisedHoSwit Cdma1xRttVoipCap
CS Fallback to ch), Switch~3,
GERAN GeranNaccSwitch( UtranPsHoSwitch~
PS Inter-RAT GeranNaccSwitch), 4,
Mobility between E- GeranCcoSwitch(G GeranPsHoSwitch~
UTRAN and eranCcoSwitch), 5,
UTRAN UtranSrvccSwitch(U CdmaHrpdNonOtpi
PS Inter-RAT tranSrvccSwitch), misedHoSwitch~6,
Mobility between E- GeranSrvccSwitch( CdmaHrpdOptimise
UTRAN and GeranSrvccSwitch), dHoSwitch~7,
GERAN Cdma1xRttSrvccSw GeranNaccSwitch~
PS Inter-RAT itch(Cdma1xRttSrvc 8,
Mobility between E- cSwitch), GeranCcoSwitch~9,
UTRAN and UtranRedirectSwitc UtranSrvccSwitch~
CDMA2000 h(UtranRedirectSwit 10,
Flash CS Fallback ch), GeranSrvccSwitch~
to UTRAN GeranRedirectSwitc 11,
CS Fallback h(GeranRedirectSw Cdma1xRttSrvccSw
Steering to UTRAN itch), itch~12,
Service based CdmaHrpdRedirect UtranRedirectSwitc
Inter-RAT handover Switch(CdmaHrpdR h~13,
to UTRAN edirectSwitch), GeranRedirectSwitc
Distance based Cdma1xRttRedirect h~14,
Inter-RAT handover Switch(Cdma1xRtt CdmaHrpdRedirect
to UTRAN RedirectSwitch), Switch~15,
Service based BlindHoSwitch(Blin Cdma1xRttRedirect
Inter-RAT handover dHoSwitch), Switch~16,
to GERAN LcsSrvccSwitch(Lcs BlindHoSwitch~17,
Distance based SrvccSwitch), LcsSrvccSwitch~18
Inter-RAT handover AutoGapSwitch(Aut ,
to GERAN Bit Field Type oGapSwitch) AutoGapSwitch~19 None
Downlink Static DlIcicSwitch_OFF_ DlIcicSwitch_OFF_
Inter-Cell ENUM, ENUM~0,
Interference DlIcicDynamicSwitc DlIcicDynamicSwitc
Coordination h_ON_ENUM, h_ON_ENUM~1,
Downlink Dynamic DlIcicStaticSwitch_ DlIcicStaticSwitch_
Inter-Cell ON_ENUM, ON_ENUM~2,
Interference DlIcicReuse3Switch DlIcicReuse3Switch
Coordination Enumeration Type _ON_ENUM _ON_ENUM~3 None
Switch),
IntraRatAnrAutoDel
Switch(IntraRatAnr
AutoDelSwitch),
UtranEventAnrSwitc
h(UtranEventAnrSw
itch),
GeranEventAnrSwit
ch(GeranEventAnr
Switch), IntraRatEventAnrS
UtranFastAnrSwitch witch~0,
(UtranFastAnrSwitc IntraRatFastAnrSwit
h), ch~1,
GeranFastAnrSwitc IntraRatAnrAutoDel
h(GeranFastAnrSwi Switch~2,
tch), UtranEventAnrSwitc
CdmaFastAnrSwitc h~3,
h(CdmaFastAnrSwit GeranEventAnrSwit
ch), ch~4,
UtranAutoNrtDelete UtranFastAnrSwitch
Switch(UtranAutoNr ~5,
tDeleteSwitch), GeranFastAnrSwitc
GeranAutoNrtDelet h~6,
eSwitch(GeranAuto CdmaFastAnrSwitc
NrtDeleteSwitch), h~7,
CdmaAutoNrtDelete UtranAutoNrtDelete
Switch(CdmaAutoN Switch~8,
rtDeleteSwitch), GeranAutoNrtDelet
ExtendIntraRatAnrS eSwitch~9,
witch(ExtendIntraR CdmaAutoNrtDelete
atAnrSwitch), Switch~10,
CdmaEventAnrSwit ExtendIntraRatAnrS
ch(CdmaEventAnrS witch~11,
Automatic witch), CdmaEventAnrSwit
Neighbour Relation MlbBasedEventAnr ch~12,
(ANR) Switch(MlbBasedEv MlbBasedEventAnr
Inter-RAT ANR Bit Field Type entAnrSwitch) Switch~13 None
Admission Control
Congestion Control
Radio/transport
resource pre-
emption
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and LoadBasedSwitch~
GERAN LoadBasedSwitch, 0,
PS Inter-RAT GeranFlashRedirect GeranFlashRedirect
Mobility between E- Switch, Switch~1,
UTRAN and UranFlashRedirect UranFlashRedirect
CDMA2000 Bit Field Type Switch Switch~2 None
IntraFreqMroSwitch
(IntraFreqMroAlgoS
witch),
InterFreqMroSwitch
(InterFreqMroAlgoS
witch), IntraFreqMroSwitch
UtranMroSwitch(Utr ~0,
anMroSwitch), InterFreqMroSwitch
GeranMroSwitch(G ~1,
eranMroSwitch), UtranMroSwitch~2,
Mobility Robust UEMroSwitch(UeMr GeranMroSwitch~3,
Optimization (MRO) Bit Field Type oAlgoSwitch) UEMroSwitch~4 None
TCP Proxy
Enhancer (TPE)
TCP Proxy TpeAlgoSwitch(Tpe
Enhancer (TPE) Bit Field Type AlgoSwitch) TpeAlgoSwitch~0 None
Cell Interference
Coordination
Uplink Dynamic
Inter-Cell UlIcicIntraSwitch(U
Interference plink Intra-eNB ICIC
Coordination Bit Field Type switch) UlIcicIntraSwitch~0 None

Cell Interference
Coordination
Uplink Dynamic OFF(Off),
Inter-Cell STATIC(Static),
Interference DYNAMIC(Dynamic OFF~0, STATIC~1,
Coordination Enumeration Type ) DYNAMIC~2 None
LoCation OtdoaSwitch(OTDO
Services(LCS) Bit Field Type A switch) OtdoaSwitch~0 None
Transport UlUuFlowCtrlSwitch
Differentiated Flow (UU flow control UlUuFlowCtrlSwitch
Control Bit Field Type switch) ~0 None
PCI Collision
Detection & Self-
Optimization Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
SymbolShutdownS
Symbol Power witch(Symbol SymbolShutdownS
Saving Bit Field Type shutdown switch) witch~0 None
CS Fallback to UTRAN_RIM_SWIT
GERAN CH(UTRAN RIM
Flash CS Fallback Switch), UTRAN_RIM_SWIT
to UTRAN GERAN_RIM_SWI CH~0,
Flash CS Fallback TCH(GERAN RIM GERAN_RIM_SWI
to GERAN Bit Field Type Switch) TCH~1 None
NBSLTEPLMNRou
ndSwitch(NBSLTEP
LMNRoundSwitch),
NBSLTERANSharin
gSwitch(NBSLTER
ANSharingSwitch),
Automatic NBSUTRANRANSh NBSLTEPLMNRou
Neighbour Relation aringSwitch(NBSUT ndSwitch~0,
(ANR) RANRANSharingS NBSLTERANSharin
Inter-RAT ANR witch), gSwitch~1,
RAN Sharing with NBSGERANRANSh NBSUTRANRANSh
Common Carrier aringSwitch(NBSG aringSwitch~2,
RAN Sharing with ERANRANSharing NBSGERANRANSh
Dedicated Carrier Bit Field Type Switch) aringSwitch~3 None
SRVCC Flexible
Steering to UTRAN
E-UTRAN to
UTRAN CS/PS UtranFreqLayerMea
Steering sSwitch(UtranFreqL
SRVCC to UTRAN ayerMeasSwitch),
CS Fallback to UtranFreqLayerBlin UtranFreqLayerMea
UTRAN dSwitch(UtranFreqL sSwitch~0,
Flash CS Fallback ayerBlindSwitch), UtranFreqLayerBlin
to UTRAN UtranSrvccSteering dSwitch~1,
CS Fallback Switch(UtranSrvccS UtranSrvccSteering
Steering to UTRAN Bit Field Type teeringSwitch) Switch~2 None
CMAS Support Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

VQM_ALGO_SWIT VQM_ALGO_SWIT
CH_OFF(Disable), CH_OFF~0,
VQM_ALGO_SWIT VQM_ALGO_SWIT
None Enumeration Type CH_ON(Enable) CH_ON~1 None
IntraOpUeNumPree
mptSwitch(IntraOp
UeNumPreemptSwi
tch),
Radio/transport InterOpUeNumPree IntraOpUeNumPree
resource pre- mptSwitch(InterOp mptSwitch~0,
emption UeNumPreemptSwi InterOpUeNumPree
Fair User Sharing Bit Field Type tch) mptSwitch~1 None
Adaptive Power
Consumption Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Adaptive Power
Consumption Compound Type 22:00:00~05:00:00 N/A None
Adaptive Power
Consumption Compound Type 23:00:00~06:00:00 N/A None
NORMAL(Normal),
POWER_OFF(RF
Module Regular NORMAL~0,
None Enumeration Type Time Sleep Mode) POWER_OFF~1 None
RAN Sharing with

Common Carrier
RAN Sharing with
RAN Sharing with
Common Carrier SHARING(Sharing),
RAN Sharing with DEDICATE(Dedicat SHARING~0,
Dedicated Carrier Enumeration Type e) DEDICATE~1 None
RAN Sharing with

Common Carrier
RAN Sharing with
RAN Sharing with
Common Carrier
RAN Sharing with
RAN Sharing with

Common Carrier Interval Type 0~100 N/A %
Mobility Robust
Optimization(MRO) Interval Type 1~70000 N/A min
Mobility Robust
Optimization(MRO) Interval Type 0~100 N/A %
Mobility Robust
Optimization(MRO) Interval Type 0~10000 N/A None
Mobility Robust
Optimization(MRO) Interval Type 1~60 N/A s
Mobility Robust
Mobility Robust
Mobility Robust
Optimization(MRO) Interval Type -140~-44 N/A dBm
Mobility Robust
Optimization(MRO) Interval Type -140~-44 N/A dBm
Mobility Robust
Optimization(MRO) Interval Type 1~7 N/A None


RAN Sharing with
Dedicated Carrier Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
TCP Proxy
Enhancer (TPE)
TCP Proxy
Enhancer (TPE) Interval Type 0~4294967295 N/A bit/s
TCP Proxy
Enhancer (TPE)
TCP Proxy
Enhancer (TPE) Interval Type 1~255 N/A ms
TCP Proxy
Enhancer (TPE)
TCP Proxy
Enhancer (TPE) Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
TCP Proxy
Enhancer (TPE)
TCP Proxy
Enhancer (TPE) Interval Type 1~1460 N/A None
Basic uplink-
downlink subframe
configuration
uplink-downlink
subframe
configuration
type1&2
uplink-downlink
special subframe
Optional uplink-
downlink subframe
configuration
uplink-downlink
subframe
uplink-downlink
special subframe
uplink-downlink
special subframe 0~261120,275943~
configuration type 5 Interval Type 307200 N/A Ts
Radio Bearer
TCP Proxy
Enhancer(TPE) Interval Type 0~20 N/A None
TCP Proxy
TCP Proxy
TCP Proxy
TCP Proxy
TCP Proxy
TCP Proxy
TCP Proxy
TCP Proxy
TCP Proxy
TCP Proxy
TCP Proxy
TCP Proxy
TCP Proxy
TCP Proxy
TCP Proxy
TCP Proxy
TCP Proxy
TCP Proxy
TCP Proxy
TCP Proxy

Actual Value Recommended Initial Value
Range Default Value Value Setting Source Impact
Default/Recommen
5000~60000 5000 5000 ded Value GTPU
Default/Recommen
3~6 3 3 ded Value GTPU
Default/Recommen
0~63 63 63 ded Value GTPU
Default/Recommen
DISABLE, ENABLE DISABLE(Disable) ENABLE(Enable) ded Value GTPU
Transport
Planning(Internal
1~127 characters None None planning) CA
Transport
Planning(Internal
Transport
Planning(Internal
SHA1, SHA256 SHA1(SHA1) SHA1(SHA1) planning) CA
DEFAULT_MODE,
CFG_UPD_SIP, Transport
CFG_INIT_UPD_A DEFAULT_MODE( Planning(Internal
DDR DEFAULT_MODE) None planning) CA
Transport
Planning(Internal
Valid IP address 0.0.0.0 None planning) CA
Transport
Planning(Internal
Transport
Planning(Internal
Valid IP address None None planning) CA
Transport
Planning(Internal
ESN, MAC, IP ESN(ESN) ESN(ESN) planning) CERTREQ
Transport
Planning(Internal
0~32 characters NULL(empty string) None planning) CERTREQ
Transport
Planning(Internal
0~0,2~2 characters NULL(empty string) None planning) CERTREQ
Transport
Planning(Internal
Transport
Planning(Internal
Transport
Planning(Internal
Transport
Planning(Internal
DATA_ENCIPHER DATA_ENCIPHER DATA_ENCIPHER

MENT, MENT:1, MENT:1,
DIGITAL_SIGNATU DIGITAL_SIGNATU DIGITAL_SIGNATU
RE, RE:1, RE:1,
KEY_AGREEMENT KEY_AGREEMENT KEY_AGREEMENT
, :1, :1, Transport
KEY_ENCIPHERM KEY_ENCIPHERM KEY_ENCIPHERM Planning(Internal
ENT ENT:1 ENT:1 planning) CERTREQ
Transport
SHA1, MD5, Planning(Internal
SHA256 SHA1(SHA1) SHA1(SHA1) planning) CERTREQ
Transport
KEYSIZE1024, KEYSIZE2048(KEY KEYSIZE2048(KEY Planning(Internal
KEYSIZE2048 SIZE2048) SIZE2048) planning) CERTREQ
Transport
Planning(Internal
Transport
Planning(Negotiatio
Valid IP address 0.0.0.0 None n with the peer) CERTREQ
Transport
Planning(Internal
1~64 characters None None planning) CERTMK
INVALID,
INEFFECTIVE,
EXPIRED, VALID,
REVOKED,
FILENOTEXIST,
UNKNOWN None None N/A CERTMK
0~128 characters None None N/A CERTMK

Transport
Planning(Internal
IKE, SSL None None planning) APPCERT
Transport
Planning(Internal
1~64 characters None None planning) APPCERT
0~128 characters None None N/A APPCERT

Transport
Planning(Internal
0~15 characters NULL(empty string) None planning) APPCERT
NORMAL,
ABNORMAL,
FILENOTEXIST None None N/A APPCERT
IKE, SSL None None N/A APPCERT
Transport
Planning(Internal
1~64 characters None None planning) CROSSCERT
0~128 characters None None N/A CROSSCERT

NORMAL,
ABNORMAL,
FILENOTEXIST None None N/A CROSSCERT
Transport
Planning(Internal
1~64 characters None None planning) TRUSTCERT
0~128 characters None None N/A TRUSTCERT

NORMAL,
ABNORMAL,
FILENOTEXIST None None N/A TRUSTCERT
Transport
Planning(Internal
1~64 characters None None planning) CRL
NORMAL,
CERTLOSS,
CERTDAMAGE,
UNKNOWFORMAT,
FAILED None None N/A CRL
0~128 characters None None N/A CRL

Transport
Planning(Internal
Valid IP address None None planning) CRLTSK
Transport
Planning(Internal
0~255 characters NULL(empty string) None planning) CRLTSK
Transport
Planning(Internal
Transport
Planning(Internal
0~65535 389 389 planning) CRLTSK
Transport
Planning(Internal
1~64 characters None None planning) CRLTSK
Transport
Planning(Internal
DISABLE, ENABLE DISABLE(Disable) DISABLE(Disable) planning) CRLTSK
Transport
Planning(Internal
8~240 24 24 planning) CRLTSK
Transport
Planning(Internal
0~3 None None planning) CRLTSK
Transport
Planning(Internal
FTP, LDAP FTP(FTP) FTP(FTP) planning) CRLTSK
Transport
Planning(Internal
Transport
Planning(Internal
Valid IP address 0.0.0.0 None planning) CRLTSK
Transport
Planning(Internal
DISABLE, ENABLE ENABLE(Enable) ENABLE(Enable) planning) CERTCHKTSK
Default/Recommen
1~15 7 7 ded Value CERTCHKTSK
Default/Recommen
7~180 30 30 ded Value CERTCHKTSK
Transport
Planning(Internal
PROXY, CMP PROXY(PROXY) PROXY(PROXY) planning) CERTCHKTSK
NOVERIFY, Transport
ALARM, NOVERIFY(No NOVERIFY(No Planning(Internal
DISCONNECT Verifying) Verifying) planning) CRLPOLICY
Transport
Planning(Internal
3000~4999 None None planning) ACL
Default/Recommen
0~7 0 0 ded Value ACL
Transport
Planning(Internal
0~127 characters None None planning) ACL
MANUAL_MODE, MANUAL_MODE(M MANUAL_MODE(M Default/Recommen

AUTO_MODE anual Mode) anual Mode) ded Value ACL
MANUAL_CREATE
D, MANUAL_CREATE MANUAL_CREATE Default/Recommen
AUTO_CREATED D(Manual Created) D(Manual Created) ded Value ACL
Transport
Planning(Internal
3000~3999 None None planning) ACL6
Transport
Planning(Internal
0~127 characters None None planning) ACL6
AUTO_MODE anual Mode) anual Mode) ded Value ACL6
MANUAL_CREATE
AUTO_CREATED D(Manual Created) D(Manual Created) ded Value ACL6
Transport
Planning(Internal
3000~4999 None None planning) ACLRULE
Transport
Planning(Internal
Transport
Planning(Internal
DENY, PERMIT PERMIT(Permit) PERMIT(Permit) planning) ACLRULE
Transport
IP, ICMP, TCP, Planning(Internal
UDP, SCTP None None planning) ACLRULE
Transport
Planning(Negotiatio
Valid IP address None None n with the peer) ACLRULE
Transport
Valid wildcard of the Planning(Negotiatio
IP address None None n with the peer) ACLRULE
Transport
Planning(Negotiatio
NO, YES None None n with the peer) ACLRULE
OP_LT, OP_GT, Transport
OP_EQ, OP_NEQ, Planning(Internal
OP_RANGE None None planning) ACLRULE
Transport
Planning(Internal
Transport
Planning(Internal
Transport
Planning(Negotiatio
Valid IP address None None n with the peer) ACLRULE
Transport
Valid wildcard of the Planning(Negotiatio
IP address None None n with the peer) ACLRULE
Transport
Planning(Negotiatio
NO, YES None None n with the peer) ACLRULE
OP_RANGE None None planning) ACLRULE
Transport
Planning(Internal
Transport
Planning(Internal
Transport
Planning(Negotiatio
NO, YES NO(No) NO(No) n with the peer) ACLRULE
Transport
Planning(Internal
Transport
Planning(Negotiatio
NO, YES NO(No) NO(No) n with the peer) ACLRULE

AUTO_MODE anual Mode) anual Mode) ded Value ACLRULE
OP_EQ, Transport
OP_RANGE, Planning(Internal
OP_NOVLAN None None planning) ACLRULE
Transport
Planning(Internal
Transport
Planning(Internal
MANUAL_CREATE
AUTO_CREATED D(Manual Created) D(Manual Created) ded Value ACLRULE
Transport
Planning(Internal
3000~3999 None None planning) ACLRULE6
Transport
Planning(Internal
Transport
Planning(Internal
DENY, PERMIT PERMIT(Permit) PERMIT(Permit) planning) ACLRULE6
Transport
IP6, TCP, UDP, Planning(Internal
ICMP6, SCTP None None planning) ACLRULE6
Transport
Planning(Negotiatio
Valid IP address None None n with the peer) ACLRULE6
Transport
Planning(Negotiatio
0~128 None None n with the peer) ACLRULE6
Transport
Planning(Negotiatio
NO, YES None None n with the peer) ACLRULE6
OP_EQ, OP_NEQ, Planning(Negotiatio
OP_RANGE None None n with the peer) ACLRULE6
Transport
Planning(Negotiatio
Transport
Planning(Negotiatio
Transport
Planning(Negotiatio
Valid IP address None None n with the peer) ACLRULE6
Transport
Planning(Negotiatio
Transport
Planning(Negotiatio
NO, YES None None n with the peer) ACLRULE6
OP_RANGE None None planning) ACLRULE6
Transport
Planning(Internal
Transport
Planning(Internal
Transport
Planning(Negotiatio
NO, YES NO(No) NO(No) n with the peer) ACLRULE6
Transport
Planning(Internal

AUTO_MODE anual Mode) anual Mode) ded Value ACLRULE6
MANUAL_CREATE
AUTO_CREATED D(Manual Created) D(Manual Created) ded Value ACLRULE6
Default/Recommen
0~7 0 0 ded Value BFDSESSION
Default/Recommen
Transport
Planning(Internal
0~7 None None planning) BFDSESSION
Transport
Planning(Internal
0~95 None None planning) BFDSESSION
Default/Recommen
Transport
Planning(Negotiatio
Valid IP address None None n with the peer) BFDSESSION
Transport
Planning(Negotiatio
Valid IP address None None n with the peer) BFDSESSION
Transport
SINGLE_HOP, Planning(Internal
MULTI_HOP None None planning) BFDSESSION
Default/Recommen
Default/Recommen
Default/Recommen
MAINTENANCE, RELIABILITY(Relia RELIABILITY(Relia Default/Recommen

RELIABILITY bility) bility) ded Value BFDSESSION
Default/Recommen
NO, YES NO(No) NO(No) N/A BFDSESSION
ADMINDOWN,
DOWN, INIT, UP None None N/A BFDSESSION
ASYNCHRONOUS
_MODE None None N/A BFDSESSION
10~1000 None None N/A BFDSESSION

NO_DIAGNOSTIC,
CTRL_DECT_TIME
_EXPIRED,
ECHO_FUNC_FAIL
ED,
NEIGHBOR_SIG_S
ESSION_DOWN,
FORDWARDING_P
LANE_RESET,
PATH_DOWN,
CONCATENATED_
PATH_DOWN,
ADMIN_DOWN,
REVERSE_CONCA
TENTATED_PATH_
DOWN,
PEER_ADMIN_DO
WN None None N/A BFDSESSION
Transport
DRAFT4, Planning(Internal
STANDARD DRAFT4(DRAFT4) DRAFT4(DRAFT4) planning) BFDSESSION
DEFAULT, Default/Recommen
SPECIFIC, NULL DEFAULT(Default) None ded Value CERTDEPLOY
Default/Recommen
0~7 0 None ded Value CERTDEPLOY
Default/Recommen
Default/Recommen
Digits 0 to 9 and
letters a to z and A Transport
to Z are Planning(Internal
1~43 characters None recommended. planning) CFMBNDIP
Digits 0 to 9 and
letters a to z and A Transport
to Z are Planning(Internal
1~43 characters None recommended. planning) CFMBNDIP
Transport
Planning(Negotiatio
1~8191 None None n with the peer) CFMBNDIP
Default/Recommen
0~7 0 0 ded Value CFMBNDIP
Transport
Planning(Internal
Valid IP address None None planning) CFMBNDIP
Digits 0 to 9 and
letters a to z and A
to Z are
recommended for Transport
the MDNAME value Planning(Internal
1~43 characters None of a CFM MA. planning) CFMMA
Digits 0 to 9 and
to Z are
the MANAME value Planning(Internal
1~43 characters None of a CFM MA. planning) CFMMA
Default/Recommen
0~7 0 0 ded Value CFMMA
Default/Recommen
0~1 0 0 ded Value CFMMA
Transport
Planning(Internal
0~7 None None planning) CFMMA
Transport
Planning(Internal
NO, YES YES(Yes) YES(Yes) planning) CFMMA
Transport
Planning(Internal
1~4094 1 None planning) CFMMA
Transport
Planning(Internal
0~7 0 0 planning) CFMMA
10ms, 100ms, 1s, Default/Recommen

10s, 1min, 10min 1s(1s) 1s(1s) ded Value CFMMA
0~32 None None N/A CFMMA
Digits 0 to 9 and
to Z are
1~43 characters None of a CFM MD. planning) CFMMD
Default/Recommen
0~7 0 0 ded Value CFMMD
0~4294967295 None None N/A CFMMD
None None None N/A CFMMD
Digits 0 to 9 and
to Z are
1~43 characters None of a CFM MEP. planning) CFMMEP
Digits 0 to 9 and
to Z are
1~43 characters None of a CFM MEP. planning) CFMMEP
Transport
Planning(Internal
1~8191 None None planning) CFMMEP
Default/Recommen
0~7 0 0 ded Value CFMMEP
Default/Recommen
0~1 0 0 ded Value CFMMEP
Transport
Planning(Internal
BASE_BOARD, Transport
ETH_COVERBOAR Planning(Internal
D None None planning) CFMMEP
Transport
Planning(Internal
ETH, ETHTRK None None planning) CFMMEP
Transport
Planning(Internal
Transport
Planning(Internal
DISABLE, ENABLE DISABLE(Disable) DISABLE(Disable) planning) CFMMEP
NO, YES YES(Yes) YES(Yes) N/A CFMMEP
1~4094 None None N/A CFMMEP
0~7 0 0 N/A CFMMEP



UP, DOWN None None N/A CFMMEP
Digits 0 to 9 and
to Z are
1~43 characters None of a CFM RMEP. planning) CFMRMEP
Digits 0 to 9 and
to Z are
1~43 characters None of a CFM RMEP. planning) CFMRMEP
Transport
Planning(Negotiatio
1~8191 None None n with the peer) CFMRMEP
Transport
Planning(Internal
14 characters 0000-0000-0000 None planning) CFMRMEP
NORMAL, FAULT None None N/A CFMRMEP
14 characters None None N/A CFMRMEP
NO, YES NO(No) NO(No) N/A CFMRMEP

0~4294967295 None None N/A CFMRMEP
Valid IP address None None N/A CFMRMEP
Transport
Planning(Internal
0~159 None None planning) CPBEARER
Transport
Planning(Internal
MASTER, SLAVE None None planning) CPBEARER
Transport
SAAL, SCTP, Planning(Internal
SCTP6 None None planning) CPBEARER
Transport
Planning(Internal
0~65535 0 None planning) CPBEARER
NORMAL, FAULT,
BLOCK None None N/A CPBEARER
UNUSED, INUSE None None N/A CPBEARER
MANUAL_MODE, MANUAL_MODE(M Default/Recommen

AUTO_MODE anual Mode) None ded Value CPBEARER
MANUAL_CREATE
D, MANUAL_CREATE Default/Recommen
AUTO_CREATED D(Manual Created) None ded Value CPBEARER
Default/Recommen
0~7 0 0 ded Value DEVIP
Default/Recommen
Transport
Planning(Internal
0~7 None None planning) DEVIP
BASE_BOARD,
E1_COVERBOARD
, BACK_BOARD, Transport
D None None planning) DEVIP
PPP, MPGRP, ETH, Transport
ETHTRK, Planning(Internal
LOOPINT, SUBIF None None planning) DEVIP
Transport
Planning(Internal
0~63 None None planning) DEVIP
Default/Recommen
Transport
Planning(Internal
Valid IP address None None planning) DEVIP
Transport
Planning(Internal
Valid Mask address None None planning) DEVIP
Transport
Planning(Internal
1~65535 None None planning) DEVIP6
Transport
Planning(Internal
Valid IP address None None planning) DEVIP6
Transport
Planning(Internal
1~128 None None planning) DEVIP6
IP6_DAD_OK,
IP6_DAD_TENTATI
VE,
IP6_DAD_DUPLIC
ATED,
IP6_DAD_UNKNO
W None None N/A DEVIP6
0~4294967295 None None N/A DEVIP6
0~4294967295 None None N/A DEVIP6
Transport
Planning(Internal DHCPRELAYSWIT
DISABLE, ENABLE DISABLE(Disable) ENABLE(Enable) planning) CH
Transport
Planning(Internal
Valid IP address None None planning) DHCPSVRIP
Transport
Planning(Negotiatio
DISABLE, ENABLE ENABLE(Enable) ENABLE(Enable) n with the peer) DHCPSW
Transport
Planning(Negotiatio
DISABLE, ENABLE DISABLE(Disable) DISABLE(Disable) n with the peer) DHCPSW
IPPRECEDENCE, Default/Recommen
DSCP DSCP(DSCP) DSCP(DSCP) ded Value DIFPRI
Default/Recommen
0~63 48 48 ded Value DIFPRI
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
0~7 0 None ded Value DOT1X
Default/Recommen
0~1 0 None ded Value DOT1X
Transport
Planning(Internal
0~7 None None planning) DOT1X
D None None planning) DOT1X
Transport
Planning(Internal
0~5 None None planning) DOT1X
Transport
EAP-TLS(EAP-TLS EAP-TLS(EAP-TLS Planning(Internal
EAP-TLS authentic method) authentic method) planning) DOT1X
0~4294967295 None None N/A DOT1X

NULL, LIC_OFF,
NOTIFY_FAIL,
NO_CERT,
PORT_DOWN None None N/A DOT1X
UNAUTHENTICAT
ED,
AUTHENTICATING
,
AUTHENTIC_SUC
CEED,
AUTHENTIC_FAIL,
DHCP_AUTHENTI
CATING None None N/A DOT1X

Default/Recommen
0~7 0 0 ded Value DSCPMAP
Transport
Planning(Internal
0~63 None 0 planning) DSCPMAP
Transport
Planning(Internal
0~7 None 0 planning) DSCPMAP
Default/Recommen
0~7 0 0 ded Value E1T1
Default/Recommen
0~1 0 0 ded Value E1T1
Transport
Planning(Internal
0~7 None None planning) E1T1
Transport
Planning(Internal
0~7,255 255 None planning) E1T1
Transport
ALLPORT, Planning(Internal
SINGLEPORT ALLPORT(All Ports) ALLPORT(All Ports) planning) E1T1
Transport
E1_UNBA, E1_BA, E1_UNBA(E1 E1_UNBA(E1 Planning(Internal
T1 Unbalance) Unbalance) planning) E1T1
E1_DOUBLE_FRA
ME,
E1_CRC4_MULTI_
FRAME,
T1_SUPER_FRAM
E,
T1_EXTENDED_S
UPER_FRAME, E1_CRC4_MULTI_ Transport
E1_HYBRID_FRAM FRAME(E1 CRC4 Planning(Internal
E None Multiple Frames) planning) E1T1
If an E1/T1 port is
carried over IP, the
AMI line coding Transport
mode is not Planning(Internal
HDB3, AMI, B8ZS None recommended. planning) E1T1
SLAVE(Slave SLAVE(Slave Default/Recommen
MASTER, SLAVE Mode) Mode) ded Value E1T1
Transport
Planning(Internal
0~7 None None planning) E1T1
OK, LOCAL_LOOP,
REMOTE_LOOP,
PAYLOAD_LOOP,
SINGLE_CH_LOOP
, LOS, AIS, LFA,
RA, LMFA, SLIP,
OTHERS,
BACKUP,
PHYSICAL_LOOP None None N/A E1T1
EXECUTELINKTES
TFlAG_0,
EXECUTELINKTES
TFlAG_1,
EXECUTELINKTES
TFlAG_2 None None N/A E1T1
NO, YES None None N/A E1T1
0~720 None None N/A E1T1

E1_COVERBOARD Planning(Internal
, BACK_BOARD None None planning) E1T1
E1_UNBA, E1_BA,
T1, UNKNOWN None None N/A E1T1
E1_DOUBLE_FRA
ME,
E1_CRC4_MULTI_
FRAME,
T1_SUPER_FRAM
E,
T1_EXTENDED_S
UPER_FRAME,
E1_MODIFY_CRC4
_MULTIFRAME,
E1_HYBRID_FRAM
E, UNKNOWN None None N/A E1T1
HDB3, AMI, B8ZS,

UNKNOWN None None N/A E1T1
1E-3, 1E-4, 1E-5, Default/Recommen

1E-6 1E-5(1E-5) 1E-5(1E-5) ded Value E1T1BER
ENDPOINT_GROU Transport
P, ENDPOINT_GROU ENDPOINT_GROU Planning(Internal
ENDPOINT_NODE P(EndPoint Group) P(EndPoint Group) planning) EP2RSCGRP
Transport
Planning(Internal
0~65535 None None planning) EP2RSCGRP
Default/Recommen
0~7 0 0 ded Value EP2RSCGRP
Default/Recommen
0~1 0 0 ded Value EP2RSCGRP
Transport
Planning(Internal
BASE_BOARD,
E1_COVERBOARD
D None None planning) EP2RSCGRP
Transport
PPP, MPGRP, ETH, Planning(Internal
ETHTRK, TUNNEL None None planning) EP2RSCGRP
Transport
Planning(Internal
0~15 0 0 planning) EP2RSCGRP
Transport
Planning(Internal
IP IP(IP) IP(IP) planning) EP2RSCGRP
Transport
Planning(Internal
Transport
Planning(Internal
0~256 characters NULL(empty string) None planning) EP2RSCGRP
Transport
Planning(Internal
0~65535 None None planning) EPGROUP
Default/Recommen
0~7 0 None ded Value EPGROUP
Transport
Planning(Internal
Transport
Planning(Internal
0~11 characters None None N/A EPGROUP
Transport
Planning(Internal
Transport
Planning(Internal
Transport
Planning(Internal
Transport
Planning(Internal
Transport
Planning(Internal
Transport
Planning(Internal
Transport
Planning(Internal
DISABLE, ENABLE DISABLE(Disable) DISABLE(Disable) planning) EPGROUP
Transport
Planning(Internal
0~256 characters NULL(empty string) None planning) EPGROUP
Default/Recommen
0~7 0 0 ded Value ETHOAM3AH
Default/Recommen
Transport
Planning(Internal
0~7 None None planning) ETHOAM3AH
D None None planning) ETHOAM3AH
Transport
Planning(Internal
ETH None None planning) ETHOAM3AH
Transport
Planning(Internal
0~5 None None planning) ETHOAM3AH
ACTIVE(Active ACTIVE(Active Default/Recommen

PASSIVE, ACTIVE Mode) Mode) ded Value ETHOAM3AH
10,20,50,100,200,5 Default/Recommen
00,1000 1000 1000 ded Value ETHOAM3AH
Default/Recommen
Default/Recommen
DISABLE, ENABLE ENABLE(Enable) ENABLE(Enable) ded Value ETHOAM3AH
Default/Recommen
DISABLE, ENABLE ENABLE(Enable) ENABLE(Enable) ded Value ETHOAM3AH
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
OAM3AH_SESSIO
N_IDLE,
OAM3AH_SESSIO
N_DISCOVER,
OAM3AH_SESSIO
N_DETECT,
OAM3AH_SESSIO
N_LB_LOCAL,
OAM3AH_SESSIO
N_LB_REMOTE None None N/A ETHOAM3AH
0~4294967295 None None N/A ETHOAM3AH


Default/Recommen
0~7 0 0 ded Value ETHPORT
Default/Recommen
Transport
Planning(Internal
0~7 None None planning) ETHPORT
D None None planning) ETHPORT
Transport
Planning(Internal
0~5 None None planning) ETHPORT
If an optical fiber is
used for
transmission, set
this parameter to
FIBER.
If an electrical cable
is used for
transmission, set Transport
COPPER, FIBER, this parameter to Planning(Internal
AUTO None COPPER. planning) ETHPORT
Default/Recommen
10M, 100M, 1000M, AUTO(Automatic AUTO(Automatic Default/Recommen
AUTO Negotiation) Negotiation) ded Value ETHPORT
Default/Recommen
FULL, AUTO FULL(Full Duplex) None ded Value ETHPORT
Default/Recommen
DISABLE, ENABLE DISABLE(Disable) DISABLE(Disable) ded Value ETHPORT
Default/Recommen
CLOSE, OPEN OPEN(Open) OPEN(Open) ded Value ETHPORT
Default/Recommen
Default/Recommen
14 characters None None N/A ETHPORT
UP, DOWN None None N/A ETHPORT
NOLOOP,
REMOTE None None N/A ETHPORT
NO, YES None None N/A ETHPORT
DISABLE, ENABLE None None N/A ETHPORT
0~4294967295 None None N/A ETHPORT

Valid IP address None None N/A ETHPORT
FORCE, AUTO None None N/A ETHPORT
FORCE, AUTO None None N/A ETHPORT
10M, 100M, 1000M,

AUTO None None N/A ETHPORT
HALF, FULL, AUTO None None N/A ETHPORT
FORCE, AUTO,
UNKNOWN None None N/A ETHPORT
10M, 100M, 1000M,

AUTO, UNKNOWN None None N/A ETHPORT
HALF, FULL,
AUTO, UNKNOWN None None N/A ETHPORT
Default/Recommen
Default/Recommen
UP, DOWN None None N/A ETHPORT
Default/Recommen
0~255 characters NULL(empty string) None ded Value ETHPORT
Default/Recommen
0~7 0 0 ded Value ETHTRK
Default/Recommen
Transport
Planning(Internal
0~7 None None planning) ETHTRK
Default/Recommen
ENABLE(Enable ENABLE(Enable Default/Recommen
DISABLE, ENABLE LACP) LACP) ded Value ETHTRK
Default/Recommen
DISABLE, ENABLE DISABLE(Disable) DISABLE(Disable) ded Value ETHTRK
D None None planning) ETHTRK
Default/Recommen
UP, DOWN None None N/A ETHTRK

14 characters None None N/A ETHTRK
14 characters None None N/A ETHTRK
0~2 None None N/A ETHTRK
0~7 characters None None N/A ETHTRK
0~7 characters None None N/A ETHTRK

Valid IP address None None N/A ETHTRK
Default/Recommen
0~7 0 0 ded Value ETHTRKLNK
Default/Recommen
Transport
Planning(Internal
0~7 None None planning) ETHTRKLNK
Transport
Planning(Internal
0~2 0 0 planning) ETHTRKLNK
Transport
Planning(Internal
0~5 None None planning) ETHTRKLNK
Default/Recommen
Transport
Planning(Internal
NO, YES None None planning) ETHTRKLNK
D None None planning) ETHTRKLNK
UP, DOWN None None N/A ETHTRKLNK
14 characters None None N/A ETHTRKLNK
SHORT, LONG,
NULL None None N/A ETHTRKLNK
SHORT, LONG,
NULL None None N/A ETHTRKLNK
0~4294967295 None None N/A ETHTRKLNK
0~4294967295 None None N/A ETHTRKLNK

Transport
ARP, ICMP, TCP, Planning(Internal
SYN, UDP None None planning) FLOODDEFEND
Transport
Planning(Internal
DISABLE, ENABLE DISABLE(Disable) None planning) FLOODDEFEND
If FLDTYPE is set
to ARP or SYN, the
recommended
value is 64.
If FLDTYPE is set
to ICMP, the
recommended
value is 128.
If FLDTYPE is set
to TCP or UDP, the Transport
recommended Planning(Internal
1~4096 None value is 2048. planning) FLOODDEFEND
Transport
Planning(Internal
DISABLE, ENABLE DISABLE(Disable) None planning) FLOODDEFEND
If FLDTYPE is set
to ARP or SYN, the
recommended
value is 32.
If FLDTYPE is set
to ICMP, the
recommended
value is 64.
If FLDTYPE is set
to TCP or UDP, the Transport
recommended Planning(Internal
1~4096 None value is 1024. planning) FLOODDEFEND
0~4294967295 None None N/A FLOODDEFEND
0~4294967295 None None N/A FLOODDEFEND

DISABLE, ENABLE DISABLE(Disable) None Engineering Design GTRANSPARA
SINGLE_RATE, SINGLE_RATE(Sin
DUAL_RATE gle Rate) None Engineering Design GTRANSPARA
0~1200 30 None Engineering Design GTRANSPARA
5~20 20 20 Engineering Design GTRANSPARA
Transport
WHITELIST, WHITELIST(Whiteli WHITELIST(Whiteli Planning(Internal
BLACKLIST st) st) planning) GTRANSPARA
0~4294967295 None None N/A GTRANSPARA




IEEE_802_1AG, IEEE_802_1AG(IE IEEE_802_1AG(IE Default/Recommen
ITU_T_Y1731 EE 802.1ag) EE 802.1ag) ded Value GTRANSPARA
PORTID_VLANID,
PORTID_VLANID_
VLANPRI, PORTID_VLANID_ PORTID_VLANID_
SA_DA_VLANID, VLANPRI(Based on VLANPRI(Based on
SA_DA_VLANID_V PortID,VLANID and PortID,VLANID and Default/Recommen
LANPRI, SA_DA VLAN PRI) VLAN PRI) ded Value GTRANSPARA
Transport
Planning(Internal
DISABLE, ENABLE DISABLE(Disable) None planning) GTRANSPARA
Transport
Planning(Internal
1~19 characters None None planning) GTRANSPARA
Transport
IPSEC, Planning(Internal
IPSECBYPASS IPSEC(IPSEC) None planning) GTRANSPARA
Valid IP address None None N/A GTRANSPARA
Valid IP address None None N/A GTRANSPARA

DISABLE, ENABLE DISABLE(Disable) None Engineering Design GTRANSPARA
1~600 60 60 Engineering Design GTRANSPARA

Transport
Planning(Internal
DISABLE, ENABLE DISABLE(Disable) DISABLE(Disable) planning) GTRANSPARA
Default/Recommen
0~7 0 0 ded Value HAGRP
Default/Recommen
0~1 0 0 ded Value HAGRP
Transport
Planning(Internal
6~7 6 6 planning) HAGRP
Transport
Planning(Negotiatio
0~31 characters NULL(empty string) None n with the peer) IKECFG
Default/Recommen
0,20~28800 0 0 ded Value IKECFG
Default/Recommen
0,60~28800 0 0 ded Value IKECFG
Transport
Planning(Internal
0~63 48 None planning) IKECFG
0~7 0 None N/A IKECFG
0~1 None None N/A IKECFG
0~7 None None N/A IKECFG

Transport
Planning(Internal
1~15 characters None None planning) IKEPEER
Transport
Planning(Internal
1~99 None None planning) IKEPEER
Transport
Planning(Internal
IKE_V1, IKE_V2 IKE_V2(IKE V2) IKE_V2(IKE V2) planning) IKEPEER
Transport
MAIN, Planning(Internal
AGGRESSIVE MAIN(Main Mode) MAIN(Main Mode) planning) IKEPEER
Transport
Planning(Internal
IP, FQDN None None planning) IKEPEER
Transport
Planning(Negotiatio
Valid IP address None None n with the peer) IKEPEER
Transport
Planning(Internal
Transport
Planning(Internal
Transport
DISABLE, PERIODIC(Periodic PERIODIC(Periodic Planning(Internal
PERIODIC ) ) planning) IKEPEER
Default/Recommen
10~3600 10 10 ded Value IKEPEER
Default/Recommen
Default/Recommen

AUTO_MODE anual Mode) anual Mode) ded Value IKEPEER
Transport
Planning(Negotiatio
Valid IP address 0.0.0.0 None n with the peer) IKEPEER
0~7 0 None N/A IKEPEER
MANUAL_CREATE
AUTO_CREATED D(Manual Created) D(Manual Created) ded Value IKEPEER
Transport
Planning(Internal
1~15 characters None None planning) IKEPEER6
Transport
Planning(Internal
1~99 None None planning) IKEPEER6
Transport
Planning(Internal
IKE_V1, IKE_V2 IKE_V2(IKE V2) IKE_V2(IKE V2) planning) IKEPEER6
Transport
MAIN, Planning(Negotiatio
AGGRESSIVE MAIN(Main Mode) MAIN(Main Mode) n with the peer) IKEPEER6
Transport
Planning(Internal
FQDN, IPV6 None None planning) IKEPEER6
Transport
Planning(Negotiatio
Valid IP address None None n with the peer) IKEPEER6
Transport
Planning(Internal
Transport
Planning(Internal
Transport
DISABLE, PERIODIC(Periodic PERIODIC(Periodic Planning(Internal
PERIODIC ) ) planning) IKEPEER6
Default/Recommen
10~3600 10 10 ded Value IKEPEER6
Default/Recommen
Default/Recommen

AUTO_MODE anual Mode) anual Mode) ded Value IKEPEER6
Transport
Planning(Negotiatio
Valid IP address 0:0:0:0:0:0:0:0 None n with the peer) IKEPEER6
0~7 0 None N/A IKEPEER6
MANUAL_CREATE
AUTO_CREATED D(Manual Created) D(Manual Created) ded Value IKEPEER6
Transport
Planning(Internal
1~99 None None planning) IKEPROPOSAL
DES, 3DES, Transport

AES128, AES192, Planning(Internal
AES256 AES128(AES128) AES128(AES128) planning) IKEPROPOSAL
Transport
MD5, SHA1, Planning(Internal
AES_XCBC_96 SHA1(SHA1) SHA1(SHA1) planning) IKEPROPOSAL
Transport
PRE_SHARED_KE PRE_SHARED_KE PRE_SHARED_KE Planning(Internal
Y, IKE_RSA_SIG Y(Pre-shared Key) Y(Pre-shared Key) planning) IKEPROPOSAL
DH_GROUP1,
DH_GROUP2, DH_GROUP2(1024 DH_GROUP2(1024 Transport
DH_GROUP14, -bit Diffie-Hellman -bit Diffie-Hellman Planning(Internal
DH_GROUP15 Group) Group) planning) IKEPROPOSAL
Default/Recommen
60~604800 86400 86400 ded Value IKEPROPOSAL
HMAC_MD5,
HMAC_SHA1, HMAC_SHA1(HMA HMAC_SHA1(HMA Default/Recommen
AES128_XCBC C_SHA1) C_SHA1) ded Value IKEPROPOSAL
0~7 0 None N/A IKEPROPOSAL
Transport
Planning(Internal
0~127 None None planning) IP2RSCGRP
Default/Recommen
0~7 0 0 ded Value IP2RSCGRP
Default/Recommen
0~1 0 0 ded Value IP2RSCGRP
Transport
Planning(Internal
0~7 None None planning) IP2RSCGRP
Transport
Planning(Internal
IP IP(IP) None planning) IP2RSCGRP
BASE_BOARD,
E1_COVERBOARD
D None None planning) IP2RSCGRP
Transport
PPP, MPGRP, ETH, Planning(Internal
ETHTRK, TUNNEL None None planning) IP2RSCGRP
Transport
Planning(Internal
0~15 0 0 planning) IP2RSCGRP
Transport
Planning(Internal
0~15 0 0 planning) IP2RSCGRP
Transport
Planning(Negotiatio
0~7 0 0 n with the peer) IP2RSCGRP
Transport
Planning(Negotiatio
Valid IP address None None n with the peer) IP2RSCGRP
Transport
Planning(Internal
Valid Mask address None None planning) IP2RSCGRP
Default/Recommen
0~7 0 0 ded Value IP2RSCGRP6
Default/Recommen
0~1 0 0 ded Value IP2RSCGRP6
Transport
Planning(Internal
6~7 None None planning) IP2RSCGRP6
Transport
Planning(Internal
BASE_BOARD None None planning) IP2RSCGRP6
Transport
Planning(Internal
ETH, TRUNK None None planning) IP2RSCGRP6
Transport
Planning(Internal
0~1 0 0 planning) IP2RSCGRP6
Transport
Planning(Internal
IP IP(IP) IP(IP) planning) IP2RSCGRP6
Transport
Planning(Internal
0~15 0 0 planning) IP2RSCGRP6
Transport
Planning(Negotiatio
Valid IP address None None n with the peer) IP2RSCGRP6
Transport
Planning(Internal
1~128 None None planning) IP2RSCGRP6
Transport
Planning(Internal
DISABLE, ENABLE DISABLE(Disable) None planning) IPGUARD
Default/Recommen
10~1000 120 None ded Value IPGUARD
Transport
Planning(Internal
Transport
Planning(Internal
Default/Recommen
Transport
Planning(Internal
Default/Recommen
PPP, MPGRP, ETH,

ETHTRK,
LOOPINT, SUBIF None None N/A IPGUARD
0~15 None None N/A IPGUARD
14 characters None None N/A IPGUARD
14 characters None None N/A IPGUARD
IPV4, ARP, RARP,

IPV6, 802_1X,
LLDP, 1588V2,
CFM, LACP, 3AH None None N/A IPGUARD
0~7 0 None N/A IPGUARD
Valid IP address None None N/A IPGUARD
Valid IP address None None N/A IPGUARD

ICMP, TCP, UDP,
SCTP None None N/A IPGUARD
0~200 characters None None N/A IPGUARD
Transport
Planning(Internal
1~65535 None None planning) IPITF6
Transport
Planning(Internal
NORMAL, VLAN NORMAL(Normal) NORMAL(Normal) planning) IPITF6
Default/Recommen
0~7 0 0 ded Value IPITF6
Default/Recommen
0~1 0 0 ded Value IPITF6
Transport
Planning(Internal
Transport
Planning(Internal
BASE_BOARD None None planning) IPITF6
Transport
ETH, TRUNK, Planning(Internal
LOOPIF None None planning) IPITF6
Transport
Planning(Internal
Transport
Planning(Internal
Default/Recommen
1280~1800 1500 None ded Value IPITF6
UP, DOWN None None N/A IPITF6
Valid IP address None None N/A IPITF6
0~8 None None N/A IPITF6

DISABLE, ENABLE None None N/A IPITF6
Transport
Planning(Internal
0~65535 None None planning) IPPATH
Default/Recommen
0~7 0 0 ded Value IPPATH
Default/Recommen
Transport
Planning(Internal
PPP, MPGRP, ETH, Transport
ETHTRK, Planning(Internal
LOOPINT, TUNNEL None None planning) IPPATH
Transport
Planning(Internal
0~35 0 0 planning) IPPATH
It is recommended
that IP Path be set
to FIXED in a
Multiple Spanning
Tree Protocol
(MSTP) network. In
other scenarios, it is
recommended that
this parameter is Default/Recommen
FIXED, ANY FIXED(Fixed QoS) set to ANY. ded Value IPPATH
Transport
Planning(Internal
Transport
Planning(Negotiatio
Valid IP address None None n with the peer) IPPATH
Transport
Planning(Negotiatio
Valid IP address None None n with the peer) IPPATH
Default/Recommen
HQ, LQ HQ(High Quality) HQ(High Quality) ded Value IPPATH
Default/Recommen
DISABLE, ENABLE DISABLE(Disable) DISABLE(Disable) ded Value IPPATH
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
0~4294967294 None None N/A IPPATH

NORMAL, FAULT,
CHECK_DISABLE
D None None N/A IPPATH
Transport
Planning(Internal
0~15 0 None planning) IPPATH
Transport
Planning(Internal
0~47 characters NULL(empty string) None planning) IPPATH
BASE_BOARD,
E1_COVERBOARD
D None None planning) IPPATH
Default/Recommen
Default/Recommen
Transport
Planning(Internal
0~65535 None None planning) IPPATH6
Transport
Planning(Internal
DISABLE, ENABLE DISABLE(Disable) DISABLE(Disable) planning) IPPATH6
Transport
Planning(Internal
0~15 None 0 planning) IPPATH6
Transport
Planning(Internal
Transport
Planning(Internal
FIXED, ANY None None planning) IPPATH6
Transport
Planning(Internal
Transport
Planning(Negotiatio
Valid IP address None None n with the peer) IPPATH6
Transport
Planning(Negotiatio
Valid IP address None None n with the peer) IPPATH6
Transport
Planning(Internal
DISABLE, ENABLE DISABLE(Disable) DISABLE(Disable) planning) IPPATH6
0~4294967295 None None N/A IPPATH6

Transport
Planning(Internal
0~47 characters NULL(empty string) None planning) IPPATH6
Default/Recommen
0~7 0 0 ded Value IPPATHRT
Transport
Planning(Negotiatio
Valid IP address None None n with the peer) IPPATHRT
Transport
Planning(Negotiatio
Valid IP address None None n with the peer) IPPATHRT
Transport
Planning(Internal
HQ, LQ None None planning) IPPATHRT
Transport
Planning(Internal
Valid IP address None None planning) IPPATHRT
Transport
Planning(Internal
0~65535 None None planning) IPPMSESSION
Transport
Planning(Negotiatio
Valid IP address None None n with the peer) IPPMSESSION
Transport
Planning(Negotiatio
Valid IP address None None n with the peer) IPPMSESSION
Transport
Planning(Internal
Transport
Planning(Internal
UP, BIDIR UP(Uplink) UP(Uplink) planning) IPPMSESSION
0~10000 None None N/A IPPMSESSION
-10000~10000 None None N/A IPPMSESSION

-10000~10000 None None N/A IPPMSESSION
IDLE, ACTING,
PMUP, DEACTING,
UNKNOWN None None N/A IPPMSESSION
IDLE, ACTING,
PMUP, DEACTING,
UNKNOWN None None N/A IPPMSESSION
FOUR_TUPLE, FOUR_TUPLE(FO FOUR_TUPLE(FO Default/Recommen

THREE_TUPLE UR_TUPLE) UR_TUPLE) ded Value IPPMSESSION
Default/Recommen
NO, YES NO(No) NO(No) ded Value IPPMSESSION
Transport
Planning(Internal
NO, YES None None N/A IPPMSESSION
None None None N/A IPPMSESSION
NO, YES None None N/A IPPMSESSION

None None None N/A IPPMSESSION
IPPMVER_V1,
IPPMVER_V2 None None N/A IPPMSESSION
Transport
Planning(Internal
0~131 None None planning) IPRT
Default/Recommen
0~7 0 0 ded Value IPRT
Default/Recommen
0~1 0 0 ded Value IPRT
Transport
Planning(Internal
0~7 None None planning) IPRT
BASE_BOARD,
UNCHANNELLED_
COVERBOARD,
E1_COVERBOARD
D None None planning) IPRT
Transport
PPP, MPGRP, Planning(Internal
TUNNEL, IPOA PPP(PPP Link) None planning) IPRT
Transport
Planning(Internal
0~32 0 0 planning) IPRT
Transport
Planning(Internal
NEXTHOP, IF None None planning) IPRT
Transport
Planning(Negotiatio
0~7 0 0 n with the peer) IPRT
Transport
Planning(Internal
Valid IP address None None planning) IPRT
Transport
Planning(Internal
Valid Mask address None None planning) IPRT
Transport
Planning(Internal
Valid IP address 0.0.0.0 None planning) IPRT
Transport
Planning(Internal
1~255 60 60 planning) IPRT
Transport
Planning(Internal
0~47 characters NULL(empty string) None planning) IPRT
STATICHOST,
STATICGATEWAY,
HOST, GATEWAY None None N/A IPRT
PPP, MPGRP, ETH,

ETHTRK,
LOOPINT, VI,
TUNNEL, SUBIF,
IPOA None None N/A IPRT
0~32 None None N/A IPRT

Transport
Planning(Negotiatio
Valid IP address None None n with the peer) IPRT6
Transport
Planning(Internal
0~128 None None planning) IPRT6
Transport
NEXTHOP(Next NEXTHOP(Next Planning(Internal
NEXTHOP Hop) Hop) planning) IPRT6
IPADDR6_TYPE_G
LOBAL_UNICAST, Transport
IPADDR6_TYPE_LI Planning(Internal
NK_LOCAL None None planning) IPRT6
Transport
Planning(Internal
Valid IP address None None planning) IPRT6
Transport
Planning(Internal
1~65535 1 None planning) IPRT6
Transport
Planning(Internal
1~255 60 60 planning) IPRT6
STATICHOST,
STATICGATEWAY,
HOST, GATEWAY None None N/A IPRT6
Transport
Planning(Internal
0~47 characters NULL(empty string) None planning) IPRT6
Default/Recommen
0~7 0 0 ded Value IPSECBIND
Default/Recommen
0~1 0 0 ded Value IPSECBIND
Transport
Planning(Internal
0~7 None None planning) IPSECBIND
D None None planning) IPSECBIND
Transport
Planning(Internal
ETH, ETHTRK None None planning) IPSECBIND
Transport
Planning(Internal
0~5 None None planning) IPSECBIND
Transport
Planning(Internal
1~15 characters None None planning) IPSECBIND
AUTO_MODE anual Mode) anual Mode) ded Value IPSECBIND
MANUAL_CREATE
AUTO_CREATED D(Manual Created) D(Manual Created) ded Value IPSECBIND
Transport
Planning(Internal
1~65535 None None planning) IPSECBIND6
Transport
Planning(Internal
1~15 characters None None planning) IPSECBIND6

AUTO_MODE anual Mode) anual Mode) ded Value IPSECBIND6
MANUAL_CREATE
AUTO_CREATED D(Manual Created) D(Manual Created) ded Value IPSECBIND6
Transport
Planning(Internal
0~49 None None planning) IPSECDTNL
Transport
Planning(Internal
1~15 characters None None planning) IPSECDTNL
Transport
Planning(Internal
Transport
Planning(Internal
1~15 characters None None planning) IPSECDTNL
Transport
Planning(Internal
Transport
Planning(Internal
Transport
Planning(Internal
MASTER, SLAVE None None N/A IPSECDTNL
Transport
Planning(Internal
1~15 characters None None planning) IPSECPOLICY
Transport
Planning(Internal
1~10000 None None planning) IPSECPOLICY
Transport
Planning(Internal
3000~3999 None None planning) IPSECPOLICY
Transport
Planning(Internal
Transport
Planning(Internal
DISABLE, Transport
PFS_GROUP1, Planning(Internal
PFS_GROUP2 DISABLE(Disable) DISABLE(Disable) planning) IPSECPOLICY
Transport
LOCAL(Local LOCAL(Local Planning(Internal
GLOBAL, LOCAL Configuration) Configuration) planning) IPSECPOLICY
Default/Recommen
30~604800 3600 3600 ded Value IPSECPOLICY
0,1843200~429496 Default/Recommen
7295 69120000 69120000 ded Value IPSECPOLICY

AUTO_MODE anual Mode) anual Mode) ded Value IPSECPOLICY
0~7 0 None N/A IPSECPOLICY

WND_DISABLE,
WND_32, WND_64,
WND_128,
WND_256,
WND_512,
WND_1024,
WND_2048, Default/Recommen
WND_4096 WND_DISABLE(0) None ded Value IPSECPOLICY
MANUAL_CREATE
AUTO_CREATED D(Manual Created) D(Manual Created) ded Value IPSECPOLICY
Transport
Planning(Internal
1~15 characters None None planning) IPSECPOLICY6
Transport
Planning(Internal
1~10000 None None planning) IPSECPOLICY6
Transport
Planning(Internal
IPV4, IPV6 None None planning) IPSECPOLICY6
Transport
Planning(Internal
Transport
Planning(Internal
Transport
Planning(Internal
Transport
Planning(Internal
DISABLE, Transport
PFS_GROUP1, Planning(Internal
PFS_GROUP2 DISABLE(Disable) DISABLE(Disable) planning) IPSECPOLICY6
Transport
LOCAL(Local LOCAL(Local Planning(Internal
GLOBAL, LOCAL Configuration) Configuration) planning) IPSECPOLICY6
Default/Recommen
30~604800 3600 3600 ded Value IPSECPOLICY6
0,1843200~429496 Default/Recommen
7295 69120000 69120000 ded Value IPSECPOLICY6
AUTO_MODE anual Mode) anual Mode) ded Value IPSECPOLICY6
0~7 0 None N/A IPSECPOLICY6
MANUAL_CREATE
AUTO_CREATED D(Manual Created) D(Manual Created) ded Value IPSECPOLICY6
Transport
Planning(Internal
1~15 characters None None planning) IPSECPROPOSAL
TUNNEL, Default/Recommen
TRANSPORT TUNNEL(Tunnel) TUNNEL(Tunnel) ded Value IPSECPROPOSAL
Transport
Planning(Internal
AH, ESP, AH_ESP ESP(ESP Protocol) ESP(ESP Protocol) planning) IPSECPROPOSAL
MD5, SHA1, AES- Transport
XCBC-MAC-96, Planning(Internal
SHA256 SHA1(SHA1) SHA1(SHA1) planning) IPSECPROPOSAL
NULL, MD5, SHA1, Transport

AES-XCBC-MAC- Planning(Internal
96, SHA256 SHA1(SHA1) SHA1(SHA1) planning) IPSECPROPOSAL
NULL, DES, 3DES, Transport
AES128, AES192, Planning(Internal
AES256 AES128(AES128) AES128(AES128) planning) IPSECPROPOSAL
0~7 0 None N/A IPSECPROPOSAL

Transport
Planning(Internal
5~32768 30 30 planning) LLDPGLOBAL
Transport
Planning(Internal
Transport
Planning(Internal
Transport
Planning(Internal
Transport
DISABLE(DISABLE DISABLE(DISABLE Planning(Internal
DISABLE, ENABLE ) ) planning) LLDPGLOBAL
Transport
Planning(Internal
NO, YES None None N/A LLDPLOCAL
0~4294967295 None None N/A LLDPLOCAL

Transport
Planning(Internal
0~7 0 0 planning) LLDPLOCAL
0~255 characters NULL(empty string) None N/A LLDPLOCAL
RESERVED,
CHASSIS_COMPO
NENT,
INTERFACE_ALIA
S,
PORT_COMPONE
NT, MAC_ADDR,
NETWORK_ADDR,
INTERFACE_NAM
E, CHASSIS_COMPO
LOCALLY_ASSIGN NENT(Chassis
ED Component) None N/A LLDPLOCAL
0~63 characters None None N/A LLDPLOCAL
IPV4, IPV6,
OTHER None None N/A LLDPLOCAL
OTHER, AUI,
10Base5, Foirl,
10Base2, 10BaseT,
10BaseFP,
10BaseFB,
10BaseFL,
10Broad36,
10BaseTHD,
10BaseTFD,
10BaseFLHD,
10BaseFLFD,
100BaseT4,
100BaseTXHD,
100BaseTXFD,
100BaseFXHD,
100BaseFXFD,
100BaseT2HD,
100BaseT2FD,
1000BaseXHD,
1000BaseXFD,
1000BaseLXHD,
1000BaseLXFD,
1000BaseSXHD,
1000BaseSXFD,
1000BaseCXHD,
1000BaseCXFD,
1000BaseTHD,
1000BaseTFD None None N/A LLDPLOCAL

RESERVED,
INTERFACE_ALIA
S,
PORT_COMPONE
NT, MAC_ADDR,
NETWORK_ADDR,
INTERFACE_NAM
E,
AGENT_CIRCUIT_I
D,
LOCALLY_ASSIGN
ED None None N/A LLDPLOCAL
Transport
Planning(Internal
0~5 None None planning) LLDPLOCAL
None None None N/A LLDPLOCAL


Transport
Planning(Internal
0~7 None None planning) LLDPLOCAL
D None None planning) LLDPLOCAL
Transport
Planning(Internal
0~1 0 0 planning) LLDPLOCAL
Other:0,
Repeater:0, MAC
Bridge:0, WLAN
Access Point:0,
Router:0,
OTHER, Telephone:0,
REPEATER, DOCSIS Cable
MACBRIDGE, Device:0, Station
WLANAP, Only:0, C-VLAN
ROUTER, Component of a
TELEPHONE, VLAN Bridge:0, S-
DOCSIS, VLAN Component
STATIONONLY, of a VLAN Bridge:0,
CVLANBRIDGE, Two-Port MAC
SVLANBRIDGE, Relay:0,
TPMR, RESERVED Reserved:0 None N/A LLDPLOCAL
Other:0,
Repeater:0, MAC
Bridge:0, WLAN
Access Point:0,
Router:0,
OTHER, Telephone:0,
REPEATER, DOCSIS Cable
MACBRIDGE, Device:0, Station
WLANAP, Only:0, C-VLAN
ROUTER, Component of a
TELEPHONE, VLAN Bridge:0, S-
DOCSIS, VLAN Component
STATIONONLY, of a VLAN Bridge:0,
CVLANBRIDGE, Two-Port MAC
SVLANBRIDGE, Relay:0,
TPMR, RESERVED Reserved:0 None N/A LLDPLOCAL
None None None N/A LLDPLOCAL
0~255 0 None N/A LLDPLOCAL
0~4094 0 None N/A LLDPLOCAL
Transport
Planning(Internal
NO, YES YES(Yes) None planning) LLDPLOCAL
Transport
Planning(Internal
1~4094 1 None planning) LLDPLOCAL
Transport
Planning(Internal
0~7 0 None planning) LLDPLOCAL
DISABLE, ENABLE ENABLE(Enable) ENABLE(Enable) N/A LOCALETHPORT
DISABLE, ENABLE None None N/A LOCALETHPORT
UP, DOWN None None N/A LOCALETHPORT
0~4294967295 None None N/A LOCALETHPORT

Planned IP address
for local Transport
maintenance on a Planning(Internal
Valid IP address 192.168.0.49 board planning) LOCALIP
Planned subnet
mask of the local Transport
maintenance Planning(Internal
Valid Mask address 255.255.255.0 channel on a board planning) LOCALIP
Transport
FE80:0:0:0:2315:E6 Planning(Internal
Valid IP address 2F:526:4623 None planning) LOCALIP6
Transport
Planning(Internal
1~128 64 None planning) LOCALIP6
IP6_DAD_OK,
IP6_DAD_TENTATI
VE,
IP6_DAD_DUPLIC
ATED,
IP6_DAD_UNKNO
W None None N/A LOCALIP6
0~4294967295 None None N/A LOCALIP6
0~4294967295 None None N/A LOCALIP6

Default/Recommen
0~7 0 0 ded Value LR
Default/Recommen
0~1 0 0 ded Value LR
Transport
Planning(Internal
0~7 None None planning) LR
Transport
MPGRP, ETH, Planning(Internal
ETHTRK, TUNNEL None None planning) LR
Transport
Planning(Internal
Transport
Planning(Internal
DISABLE, ENABLE DISABLE(Disable) DISABLE(Disable) planning) LR
Transport
Planning(Internal
Transport
Planning(Internal
Transport
Planning(Internal
BASE_BOARD,
E1_COVERBOARD
D None None planning) LR
The recommended
value for this
parameter is 31744
if PT is set to
MPGRP.
The recommended
value is 540000 if Transport
PT is set to ETH or Planning(Internal
32~1000000 None ETHTRK. planning) LR
Default/Recommen
0~7 0 0 ded Value MPGRP
Default/Recommen
Transport
Planning(Internal
0~7 None None planning) MPGRP
Transport
Planning(Internal
0~3 None None planning) MPGRP
Default/Recommen
DISABLE, ENABLE ENABLE(Enable) ENABLE(Enable) ded Value MPGRP
NONAUTH, PAP, PAP(PAP PAP(PAP Default/Recommen

CHAP Authentication) Authentication) ded Value MPGRP
Transport
Planning(Internal
1~67 characters None None planning) MPGRP
Transport
Planning(Internal
1~19 characters None None planning) MPGRP
Transport
Planning(Negotiatio
Valid IP address 0.0.0.0 None n with the peer) MPGRP
Transport
Planning(Negotiatio
Valid Mask address 0.0.0.0 None n with the peer) MPGRP
Transport
Planning(Negotiatio
Valid IP address 0.0.0.0 None n with the peer) MPGRP
Default/Recommen
LONG, SHORT LONG(Long) LONG(Long) ded Value MPGRP
Default/Recommen
DISABLE, ENABLE DISABLE(Disable) DISABLE(Disable) ded Value MPGRP
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
4,8 8 None ded Value MPGRP
Default/Recommen
DISABLE, ENABLE ENABLE(Enable) ENABLE(Enable) ded Value MPGRP
Default/Recommen
Default/Recommen
Default/Recommen
DISABLE, ENABLE DISABLE(Disable) DISABLE(Disable) ded Value MPGRP
UP, DOWN None None N/A MPGRP
INITIAL,
STARTING,
CLOSED,
STOPPED,
CLOSING,
STOPPING,
REQSENT,
ACKRCVD,
ACKSENT,
OPENED None None N/A MPGRP
INITIAL,
STARTING,
CLOSED,
STOPPED,
CLOSING,
STOPPING,
REQSENT,
ACKRCVD,
ACKSENT,
OPENED None None N/A MPGRP
Valid IP address None None N/A MPGRP
DISABLE, ENABLE None None N/A MPGRP
128~1500 None None N/A MPGRP

Transport
BASE_BOARD, Planning(Internal
E1_COVERBOARD None None planning) MPGRP
Default/Recommen
0~7 0 0 ded Value MPLNK
Default/Recommen
Transport
Planning(Internal
0~7 None None planning) MPLNK
Transport
Planning(Internal
0~15 0 0 planning) MPLNK
Default/Recommen
Default/Recommen
Transport
Planning(Internal
0~7 None None planning) MPLNK
Default/Recommen
TS1, TS2, TS3,

TS4, TS5, TS6,
TS7, TS8, TS9,
TS10, TS11, TS12,
TS13, TS14, TS15,
TS16, TS17, TS18,
TS19, TS20, TS21,
TS22, TS23, TS24,
TS25, TS26, TS27, Transport
TS28, TS29, TS30, Planning(Internal
TS31 None None planning) MPLNK
Default/Recommen
128~1500 1500 1500 ded Value MPLNK
Default/Recommen
DISABLE, ENABLE ENABLE(Enable) ENABLE(Enable) ded Value MPLNK
Default/Recommen
DISABLE, ENABLE ENABLE(Enable) ENABLE(Enable) ded Value MPLNK
Default/Recommen
1~65535 3000 3000 ded Value MPLNK
, BACK_BOARD None None planning) MPLNK
If SBT is set to
BASE_BOARD or
BACK_BOARD,
you are advised to
set MPGRPSBT to
BASE_BOARD.
If SBT is set to
E1_COVERBOARD
, you are advised to
set to MPGRPSBT
to
BASE_BOARD, E1_COVERBOARD Default/Recommen
E1_COVERBOARD None . ded Value MPLNK
UP, DOWN None None N/A MPLNK
INITIAL,
STARTING,
CLOSED,
STOPPED,
CLOSING,
STOPPING,
REQSENT,
ACKRCVD,
ACKSENT,
OPENED None None N/A MPLNK
128~1500 None None N/A MPLNK
DISABLE, ENABLE None None N/A MPLNK

DISABLE, ENABLE None None N/A MPLNK
, BACK_BOARD None None planning) MPLNK

Transport
Planning(Internal
MASTER, SLAVE None None planning) OMCH
Transport
Planning(Negotiatio
Valid IP address None None n with the peer) OMCH
Transport
Planning(Negotiatio
Transport
Planning(Negotiatio
Transport
Planning(Negotiatio
Transport
Planning(Internal
IPV4 IPV4(IPV4) None planning) OMCH
Transport
Planning(Internal
NO, YES NO(No) NO(No) planning) OMCH
NORMAL,
ABNORMAL,
UNKNOWN None None N/A OMCH
INUSE, UNUSED None None N/A OMCH
Transport
Planning(Internal
0~131 None None planning) OMCH
Transport
Planning(Internal
NO, YES NO(No) None planning) OMCH
Transport
Planning(Internal
Transport
NONE, Planning(Internal
UDPSESSION NONE(NONE) None planning) OMCH
Transport
Planning(Internal
Transport
Planning(Negotiatio
Valid IP address None None n with the peer) OMCH6
Transport
Planning(Negotiatio
Valid IP address None None n with the peer) OMCH6
NORMAL,
ABNORMAL,
UNKNOWN None None N/A OMCH6
Default/Recommen
0~7 0 0 ded Value PACKETFILTER
Default/Recommen
0~1 0 0 ded Value PACKETFILTER
Transport
Planning(Internal
0~7 None None planning) PACKETFILTER
Transport
ETH, ETHTRK, Planning(Internal
TUNNEL, SUBIF None None planning) PACKETFILTER
Transport
Planning(Internal
Transport
Planning(Internal
Default/Recommen
PERMIT, DENY DENY(Deny) DENY(Deny) ded Value PACKETFILTER
BASE_BOARD,
BACK_BOARD, Transport
D None None planning) PACKETFILTER
0~4294967295 None None N/A PACKETFILTER


Transport
Planning(Internal
ADV_ACL, Transport
L2_ACL, ADV_ACL(Only Planning(Internal
ADV_AND_L2 Advanced ACL) None planning) PACKETFILTER
Transport
Planning(Internal
Valid IP address None None planning) PINGFILTER
Transport
Planning(Internal
Valid Mask address None None planning) PINGFILTER
Default/Recommen
0~7 0 0 ded Value PINGFILTER
Default/Recommen
0~100 50 50 ded Value PLRTHRESHOLD
Default/Recommen
0~100 10 10 ded Value PLRTHRESHOLD
PASSIVE(Passive PASSIVE(Passive Default/Recommen
PASSIVE, ACTIVE Mode) Mode) ded Value PMTUCFG
Default/Recommen
49152~65535 52889 52889 ded Value PMTUCFG
Default/Recommen
Default/Recommen
5~60,65535 65535 65535 ded Value PMTUCFG
Default/Recommen
Default/Recommen
0~7 0 0 ded Value PORTSECURITY
Default/Recommen
0~1 0 0 ded Value PORTSECURITY
Transport
Planning(Internal
0~7 None None planning) PORTSECURITY
BASE_BOARD,
E1_COVERBOARD
D None None planning) PORTSECURITY
Transport
Planning(Internal
ETH, E1T1 ETH(Ethernet Port) ETH(Ethernet Port) planning) PORTSECURITY
Transport
Planning(Internal
0~7 None None planning) PORTSECURITY
Transport
Planning(Internal
DISABLE, ENABLE ENABLE(Enable) ENABLE(Enable) planning) PORTSECURITY
Default/Recommen
0~7 0 0 ded Value PPPLNK
Default/Recommen
Transport
Planning(Internal
0~7 None None planning) PPPLNK
Transport
Planning(Internal
0~15 0 None planning) PPPLNK
Transport
Planning(Internal
0~7 0 None planning) PPPLNK
NONAUTH, PAP, PAP(PAP PAP(PAP Default/Recommen
CHAP Authentication) Authentication) ded Value PPPLNK
Transport
Planning(Internal
1~67 characters None None planning) PPPLNK
Transport
Planning(Internal
1~19 characters None None planning) PPPLNK
TS1, TS2, TS3,
TS4, TS5, TS6,
TS7, TS8, TS9,
TS10, TS11, TS12,
TS13, TS14, TS15,
TS16, TS17, TS18,
TS19, TS20, TS21,
TS22, TS23, TS24,
TS25, TS26, TS27, Transport
TS28, TS29, TS30, Planning(Internal
TS31 None None planning) PPPLNK
Transport
Planning(Negotiatio
Valid IP address 0.0.0.0 None n with the peer) PPPLNK
Transport
Planning(Negotiatio
Valid Mask address 0.0.0.0 None n with the peer) PPPLNK
Transport
Planning(Negotiatio
Valid IP address 0.0.0.0 None n with the peer) PPPLNK
Default/Recommen
DISABLE, ENABLE DISABLE(Disable) DISABLE(Disable) ded Value PPPLNK
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
DISABLE, ENABLE ENABLE(Enable) ENABLE(Enable) ded Value PPPLNK
Default/Recommen
DISABLE, ENABLE DISABLE(Disable) DISABLE(Disable) ded Value PPPLNK
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
UP, DOWN None None N/A PPPLNK
INITIAL,
STARTING,
CLOSED,
STOPPED,
CLOSING,
STOPPING,
REQSENT,
ACKRCVD,
ACKSENT,
OPENED None None N/A PPPLNK
INITIAL,
STARTING,
CLOSED,
STOPPED,
CLOSING,
STOPPING,
REQSENT,
ACKRCVD,
ACKSENT,
INITIAL,
STARTING,
CLOSED,
STOPPED,
CLOSING,
STOPPING,
REQSENT,
ACKRCVD,
ACKSENT,
Valid IP address None None N/A PPPLNK

DISABLE, ENABLE None None N/A PPPLNK
128~1500 None None N/A PPPLNK
Default/Recommen
Default/Recommen
, BACK_BOARD None None planning) PPPLNK
Default/Recommen
0~7 0 0 ded Value PRI2QUE
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
0~7 0 0 ded Value RSCGRP
Default/Recommen
Transport
Planning(Internal
0~7 None None planning) RSCGRP
Transport
Planning(Internal
ATM, IP None None planning) RSCGRP
BASE_BOARD,
UNCHANNELLED_
COVERBOARD,
E1_COVERBOARD
D None None planning) RSCGRP
IMA, UNI, STM1,
FRAATM, PPP, Transport
ETHTRK, TUNNEL None None planning) RSCGRP
Transport
Planning(Internal
0~15 0 0 planning) RSCGRP
0, 1, 2, 3, 4, 5, 6, 7,
8, 9, 10, 11, 12, 13, Transport
14, 15, Planning(Internal
DEFAULTPORT None None planning) RSCGRP
Transport
Planning(Internal
KBPS, CELL/S KBPS(Kbit/s) None planning) RSCGRP
Transport
Planning(Internal
Transport
Planning(Internal
The recommended
value is 1.5 to 2 Transport
times of the TX Planning(Internal
64~1000000 64 bandwidth. planning) RSCGRP
The recommended Transport
value is twice the Planning(Internal
64~1000000 1000000 TX bandwidth. planning) RSCGRP
Transport
Planning(Internal
0~5 0 0 planning) RSCGRP
Default/Recommen
Transport
Planning(Internal
Transport
Planning(Internal
Transport
Planning(Internal
Transport
Planning(Internal
Transport
Planning(Internal
0~4294967295 None None N/A RSCGRP

0~4294967295 0 None N/A RSCGRP

SINGLE_RATE,
DUAL_RATE None None N/A RSCGRP

0~4294967295 0 None N/A RSCGRP
Default/Recommen
0~7 0 0 ded Value RSCGRPALG
Default/Recommen
0~1 0 0 ded Value RSCGRPALG
Transport
Planning(Internal
0~7 None None planning) RSCGRPALG
BASE_BOARD,
UNCHANNELLED_
COVERBOARD,
E1_COVERBOARD
D None None planning) RSCGRPALG
Transport
Planning(Internal
ATM, IP IP(IP) None planning) RSCGRPALG
IMA, UNI, STM1,
FRAATM, PPP, Transport
ETHTRK, TUNNEL None None planning) RSCGRPALG
Transport
Planning(Internal
0~15 0 0 planning) RSCGRPALG
0, 1, 2, 3, 4, 5, 6, 7,
8, 9, 10, 11, 12, 13, Transport
14, 15, Planning(Internal
DEFAULTPORT None None planning) RSCGRPALG
OFF, ON ON(On) ON(On) Engineering Design RSCGRPALG

OFF, ON OFF(Off) OFF(Off) Engineering Design RSCGRPALG
OFF, ON OFF(Off) OFF(Off) Engineering Design RSCGRPALG
0~1000 1 1 Engineering Design RSCGRPALG


DISABLE, ENABLE ENABLE(Enable) ENABLE(Enable) Engineering Design RSCGRPALG
DISABLE, ENABLE ENABLE(Enable) ENABLE(Enable) Engineering Design RSCGRPALG


Transport
Planning(Internal
0~65535 None None planning) SCTPHOST
Default/Recommen
0~7 0 None ded Value SCTPHOST
Transport
Planning(Internal
IPv4, IPv6 IPv4(IPv4) None planning) SCTPHOST
Transport
Planning(Internal
Valid IP address None None planning) SCTPHOST
Transport
Planning(Internal
Valid IP address None None planning) SCTPHOST
If the networking
mode does not
support IPSec or
IPSec tunnels are
to be set up by
manually
configuring IPSec
MOs, this Transport
parameter must be Planning(Internal
DISABLE, ENABLE DISABLE(Disable) set to DISABLE. planning) SCTPHOST
Transport
Planning(Internal
Transport
Planning(Internal
Valid IP address 0.0.0.0 None planning) SCTPHOST
Transport
Planning(Internal
Valid IP address 0:0:0:0:0:0:0:0 None planning) SCTPHOST
If the networking
mode does not
support IPSec or
IPSec tunnels are
to be set up by
manually
configuring IPSec
MOs, this Transport
DISABLE, ENABLE DISABLE(Disable) set to DISABLE. planning) SCTPHOST
Transport
Planning(Internal
Transport
Planning(Internal
Transport
Planning(Internal
Transport
Planning(Internal
0~256 characters NULL(empty string) None planning) SCTPHOST
Transport
Planning(Internal
0~65535 None None planning) SCTPLNK
Default/Recommen
0~7 0 0 ded Value SCTPLNK
Default/Recommen
Transport
Planning(Internal
0~7 None None planning) SCTPLNK
Default/Recommen

AUTO_MODE anual Mode) anual Mode) ded Value SCTPLNK
Transport
Planning(Negotiatio
Valid IP address None None n with the peer) SCTPLNK
Transport
Planning(Negotiatio
Valid IP address 0.0.0.0 None n with the peer) SCTPLNK
Transport
Planning(Negotiatio
1024~65535 None None n with the peer) SCTPLNK
Transport
Planning(Negotiatio
Valid IP address None None n with the peer) SCTPLNK
Transport
Planning(Negotiatio
Valid IP address 0.0.0.0 None n with the peer) SCTPLNK
Transport
Planning(Negotiatio
1024~65535 None None n with the peer) SCTPLNK
Default/Recommen
Default/Recommen
Default/Recommen
0.01~0.99, Default/Recommen
step:0.01 12 12 ded Value SCTPLNK
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
ALDER32, CRC32 CRC32(CRC32) None ded Value SCTPLNK
Default/Recommen
DISABLE, ENABLE ENABLE(Enable) ENABLE(Enable) ded Value SCTPLNK
Default/Recommen
SCTP_STAT_DOW
N,
SCTP_STAT_CON
GESTION,
SCTP_STAT_UP None None N/A SCTPLNK
SCTP_TRANSFER
_CAUSE_START,
SCTP_TRANSFER
_CAUSE_LINKDO
WN,
SCTP_TRANSFER
_CAUSE_PORTDI
SABLED,
SCTP_TRANSFER
_CAUSE_INIT,
SCTP_TRANSFER
_CAUSE_UNKNO
WERROR,
SCTP_TRANSFER
_CAUSE_NORMAL
,
SCTP_TRANSFER
_CAUSE_USERDE
LETE None None N/A SCTPLNK
None None None N/A SCTPLNK

0~34 None None N/A SCTPLNK
0~34 None None N/A SCTPLNK
ACTIVE, STANDBY None None N/A SCTPLNK
UNBLOCK(Unblock UNBLOCK(Unblock Default/Recommen

UNBLOCK, BLOCK ) ) ded Value SCTPLNK
Default/Recommen
Default/Recommen
0~47 characters NULL(empty string) None ded Value SCTPLNK
MANUAL_CREATE
AUTO_CREATED D(Manual Created) D(Manual Created) ded Value SCTPLNK
Default/Recommen
Transport
Planning(Internal
0~65535 None None planning) SCTPLNK6
Default/Recommen
1~34 17 17 ded Value SCTPLNK6

AUTO_MODE anual Mode) anual Mode) ded Value SCTPLNK6
Transport
Planning(Negotiatio
Valid IP address None None n with the peer) SCTPLNK6
Transport
Planning(Negotiatio
Valid IP address 0:0:0:0:0:0:0:0 None n with the peer) SCTPLNK6
Transport
Planning(Negotiatio
1024~65535 None None n with the peer) SCTPLNK6
Transport
Planning(Negotiatio
Valid IP address None None n with the peer) SCTPLNK6
Transport
Planning(Negotiatio
Valid IP address 0:0:0:0:0:0:0:0 None n with the peer) SCTPLNK6
Transport
Planning(Negotiatio
1024~65535 None None n with the peer) SCTPLNK6
Default/Recommen
Default/Recommen
Default/Recommen
step:0.01 12 12 ded Value SCTPLNK6
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
ALDER32, CRC32 CRC32(CRC32) None ded Value SCTPLNK6
Default/Recommen
DISABLE, ENABLE ENABLE(Enable) ENABLE(Enable) ded Value SCTPLNK6
Default/Recommen
SCTP_STAT_DOW
N,
SCTP_STAT_CON
GESTION,
SCTP_STAT_UP None None N/A SCTPLNK6
SCTP_TRANSFER
_CAUSE_START,
SCTP_TRANSFER
_CAUSE_LINKDO
WN,
SCTP_TRANSFER
_CAUSE_PORTDI
SABLED,
SCTP_TRANSFER
_CAUSE_INIT,
SCTP_TRANSFER
_CAUSE_UNKNO
WERROR,
SCTP_TRANSFER
_CAUSE_NORMAL
,
SCTP_TRANSFER
_CAUSE_USERDE
LETE None None N/A SCTPLNK6
None None None N/A SCTPLNK6
0~34 None None N/A SCTPLNK6
0~34 None None N/A SCTPLNK6
ACTIVE, STANDBY None None N/A SCTPLNK6
UNBLOCK(Unblock UNBLOCK(Unblock Default/Recommen

UNBLOCK, BLOCK ) ) ded Value SCTPLNK6
Transport
Planning(Internal
0~47 characters NULL(empty string) None planning) SCTPLNK6
MANUAL_CREATE
AUTO_CREATED D(Manual Created) D(Manual Created) ded Value SCTPLNK6
Default/Recommen
Transport
Planning(Internal
0~65535 None None planning) SCTPPEER
Default/Recommen
0~7 0 None ded Value SCTPPEER
Transport
Planning(Negotiatio
IPv4, IPv6 IPv4(IPv4) None n with the peer) SCTPPEER
Transport
Planning(Negotiatio
Valid IP address None None n with the peer) SCTPPEER
Transport
Planning(Negotiatio
Valid IP address None None n with the peer) SCTPPEER
If the networking
mode does not
support IPSec or
IPSec tunnels are
to be set up by
manually
configuring IPSec
MOs, this Transport
parameter must be Planning(Negotiatio
DISABLE, ENABLE DISABLE(Disable) set to DISABLE. n with the peer) SCTPPEER
Transport
Planning(Negotiatio
0~65535 None None n with the peer) SCTPPEER
Transport
Planning(Negotiatio
Valid IP address 0.0.0.0 None n with the peer) SCTPPEER
Transport
Planning(Negotiatio
Valid IP address 0:0:0:0:0:0:0:0 None n with the peer) SCTPPEER
If the networking
mode does not
support IPSec or
IPSec tunnels are
to be set up by
manually
configuring IPSec
MOs, this Transport
DISABLE, ENABLE DISABLE(Disable) set to DISABLE. n with the peer) SCTPPEER
Transport
Planning(Negotiatio
Transport
Planning(Negotiatio
Transport
Planning(Negotiatio
0~127 characters NULL(empty string) None n with the peer) SCTPPEER
MANUAL_MODE, AUTO_MODE(Auto AUTO_MODE(Auto Default/Recommen
AUTO_MODE Mode) Mode) ded Value SCTPPEER
MANUAL_CREATE
AUTO_CREATED D(Manual Created) D(Manual Created) ded Value SCTPPEER
Transport
Planning(Internal
0~256 characters NULL(empty string) None planning) SCTPPEER
Transport
Planning(Internal
0~65535 None None planning) SCTPTEMPLATE
Default/Recommen
10~59999 1000 1000 ded Value SCTPTEMPLATE
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
DISABLE, ENABLE ENABLE(Enable) ENABLE(Enable) ded Value SCTPTEMPLATE
Default/Recommen
Default/Recommen
Default/Recommen
ALDER32, CRC32 CRC32(CRC32) CRC32(CRC32) ded Value SCTPTEMPLATE
Default/Recommen
Transport
Planning(Internal
0~65535 None None planning) SECURITYHOST
Transport
Planning(Internal
DISABLE, ENABLE DISABLE(Disable) None planning) SECURITYHOST
SEGW_CONFIG_O
N_HOST, SEGW_CONFIG_O Transport
SEGW_CONFIG_O N_PEER(SeGW Planning(Internal
N_PEER Config on Peer) None planning) SECURITYHOST
Transport
Planning(Internal
IPv4, IPv6 IPv4(IPv4) None planning) SECURITYHOST
Transport
Planning(Internal
Valid IP address None None planning) SECURITYHOST
Transport
Planning(Internal
Valid IP address None None planning) SECURITYHOST
Transport
Planning(Internal
1~15 characters None None planning) SECURITYHOST
Transport
Planning(Internal
1~15 characters None None planning) SECURITYHOST
Transport
Planning(Internal
0~65535 None None planning) SECURITYHOST
Transport
Planning(Internal
0~256 characters NULL(empty string) None planning) SECURITYHOST
Transport
Planning(Internal
0~65535 None None planning) SECURITYPEER
Transport
Planning(Negotiatio
DISABLE, ENABLE DISABLE(Disable) None n with the peer) SECURITYPEER
Transport
Planning(Negotiatio
IPv4, IPv6 IPv4(IPv4) None n with the peer) SECURITYPEER
Transport
Planning(Negotiatio
Valid IP address None None n with the peer) SECURITYPEER
Transport
Planning(Negotiatio
Valid IP address None None n with the peer) SECURITYPEER
Transport
Planning(Negotiatio
1~15 characters None None n with the peer) SECURITYPEER
Transport
Planning(Negotiatio
1~15 characters None None n with the peer) SECURITYPEER

AUTO_MODE Mode) Mode) ded Value SECURITYPEER
Transport
Planning(Internal
0~256 characters NULL(empty string) None planning) SECURITYPEER
MANUAL_CREATE
AUTO_CREATED D(Manual Created) D(Manual Created) ded Value SECURITYPEER
Transport
Planning(Internal SECURITYTEMPL
0~65535 None None planning) ATE
Transport
DISABLE, ENABLE DISABLE(Disable) None planning) ATE
Transport
1~99 None None planning) ATE
Transport
1~15 characters None None planning) ATE
Transport
IKE_V1, IKE_V2 IKE_V2(IKE V2) IKE_V2(IKE V2) planning) ATE
Transport
MAIN, Planning(Internal SECURITYTEMPL
AGGRESSIVE MAIN(Main Mode) MAIN(Main Mode) planning) ATE
Transport
0~127 characters None None planning) ATE
Transport
DISABLE, PERIODIC(Periodic PERIODIC(Periodic Planning(Internal SECURITYTEMPL
PERIODIC ) ) planning) ATE
Default/Recommen SECURITYTEMPL
10~3600 10 10 ded Value ATE
DISABLE, Transport
PFS_GROUP1, Planning(Internal SECURITYTEMPL
PFS_GROUP2 DISABLE(Disable) DISABLE(Disable) planning) ATE
Transport
LOCAL(Local LOCAL(Local Planning(Internal SECURITYTEMPL
GLOBAL, LOCAL Configuration) Configuration) planning) ATE
30~604800 3600 3600 ded Value ATE
0,1843200~429496 Default/Recommen SECURITYTEMPL
7295 69120000 69120000 ded Value ATE
WND_DISABLE,
WND_32, WND_64,
WND_128,
WND_256,
WND_512,
WND_1024,
WND_2048, Default/Recommen SECURITYTEMPL
WND_4096 WND_DISABLE(0) WND_DISABLE(0) ded Value ATE
Default/Recommen
0~7 0 0 ded Value SUBIF
Default/Recommen
Transport
Planning(Internal
6~7 None None planning) SUBIF
Transport
Planning(Internal
BASE_BOARD None None planning) SUBIF
Transport
Planning(Internal
Transport
Planning(Internal
ETH, ETHTRK None None planning) SUBIF
Transport
Planning(Internal
Default/Recommen
Default/Recommen
DISABLE, ENABLE DISABLE(Disable) DISABLE(Disable) ded Value SUBIF
Transport
Planning(Internal
Valid IP address None None planning) SUBNETVLAN
Transport
Planning(Internal
Valid Mask address None 255.255.255.255 planning) SUBNETVLAN
Transport
Planning(Internal
1~4094 None None planning) SUBNETVLAN
Default/Recommen
OFF, ON ON(On) ON(On) ded Value TACALG
Default/Recommen
Default/Recommen
0~100 90 90 ded Value TACALG
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
OFF, ON OFF(Off) OFF(Off) ded Value TACALG
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
0~100 70 70 ded Value TLDRALG
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Transport
Planning(Internal
DISABLE, ENABLE ENABLE(Enable) ENABLE(Enable) planning) TLFRSWITCH
Default/Recommen
OFF, ON ON(On) ON(On) ded Value TOLCALG
Default/Recommen
OFF, ON ON(On) ON(On) ded Value TOLCALG
Default/Recommen
0~100 95 95 ded Value TOLCALG
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Transport
Planning(Internal
0~7 0 None planning) TUNNEL
Transport
Planning(Internal
0~1 0 None planning) TUNNEL
Transport
Planning(Internal
0~7 None None planning) TUNNEL
Transport
Planning(Internal
Transport
Planning(Internal
Transport
Planning(Internal
Transport
Planning(Internal
Transport
Planning(Internal
UL, DL UL(UL) None planning) TUNNEL
0~4294967295 None None N/A TUNNEL

Transport
Planning(Internal
0~65535 None None planning) UDPSESSION
Default/Recommen
0~7 0 0 ded Value UDPSESSION
Default/Recommen
0~1 0 0 ded Value UDPSESSION
Transport
Planning(Internal
0~7 None None planning) UDPSESSION
Transport
Planning(Negotiatio
Valid IP address None None n with the peer) UDPSESSION
Transport
Planning(Negotiatio
Valid IP address None None n with the peer) UDPSESSION
Transport
Planning(Internal
0~63 48 48 planning) UDPSESSION
0~255 None None N/A UDPSESSION
Default/Recommen
1~60 5 None ded Value UDPSESSION
Default/Recommen
3~10 5 None ded Value UDPSESSION
NORMAL,
ABNORMAL NORMAL(Normal) None N/A UDPSESSION
Transport
Planning(Internal
1~254 None None planning) UDT
Transport
Planning(Internal
0~48 None None planning) UDT
Transport
Planning(Internal
0~48 None None planning) UDTPARAGRP
IPPRECEDENCE, Default/Recommen
DSCP DSCP(DSCP) DSCP(DSCP) ded Value UDTPARAGRP
Transport
Planning(Internal
Transport
Planning(Internal
0~100 0 None planning) UDTPARAGRP
Transport
Planning(Internal
HQ, LQ None None planning) UDTPARAGRP
Transport
Planning(Internal
Transport
Planning(Internal
Transport
Planning(Internal
0~65535 None None planning) USERPLANEHOST
Default/Recommen
0~7 0 None ded Value USERPLANEHOST
Transport
Planning(Internal
IPv4, IPv6 IPv4(IPv4) None planning) USERPLANEHOST
Transport
Planning(Internal
Valid IP address None None planning) USERPLANEHOST
Transport
Planning(Internal
Valid IP address None None planning) USERPLANEHOST
If the networking
mode does not
support IPSec or
IPSec tunnels are
to be set up by
manually
configuring IPSec
MOs, this Transport
DISABLE, ENABLE DISABLE(Disable) set to DISABLE. planning) USERPLANEHOST
Transport
Planning(Internal
0~65535 None None planning) USERPLANEHOST
Transport
Planning(Internal
0~256 characters NULL(empty string) None planning) USERPLANEHOST
Transport
Planning(Internal
0~65535 None None planning) USERPLANEPEER
Default/Recommen
0~7 0 None ded Value USERPLANEPEER
Transport
Planning(Negotiatio
IPv4, IPv6 IPv4(IPv4) None n with the peer) USERPLANEPEER
Transport
Planning(Negotiatio
Valid IP address None None n with the peer) USERPLANEPEER
Transport
Planning(Negotiatio
Valid IP address None None n with the peer) USERPLANEPEER
If the networking
mode does not
support IPSec or
IPSec tunnels are
to be set up by
manually
configuring IPSec
MOs, this Transport
DISABLE, ENABLE DISABLE(Disable) set to DISABLE. n with the peer) USERPLANEPEER
Transport
Planning(Negotiatio
0~65535 None None n with the peer) USERPLANEPEER
Transport
Planning(Negotiatio
0~127 characters NULL(empty string) None n with the peer) USERPLANEPEER

AUTO_MODE Mode) Mode) ded Value USERPLANEPEER
MANUAL_CREATE
AUTO_CREATED D(Manual Created) D(Manual Created) ded Value USERPLANEPEER
Transport
Planning(Internal
0~256 characters NULL(empty string) None planning) USERPLANEPEER
Transport
Planning(Internal
0~3 0 None planning) VLANCLASS
USERDATA, SIG,
OTHER, Transport
OM_HIGH, Planning(Internal
OM_LOW None None planning) VLANCLASS
It is recommended
that the value of
this parameter be
consistent with the
implementation of Transport
the differentiated Planning(Internal
0~63 0 service. planning) VLANCLASS
Transport
Planning(Internal
1~4094 1 None planning) VLANCLASS
Transport
Planning(Internal
0~7 0 0 planning) VLANCLASS
Default/Recommen
0~7 0 0 ded Value VLANMAP
Transport
Planning(Internal
Valid IP address None None planning) VLANMAP
Transport
Planning(Internal
Valid Mask address 255.255.255.255 None planning) VLANMAP
Transport
SINGLEVLAN, Planning(Internal
VLANGROUP None None planning) VLANMAP
Transport
Planning(Internal
1~4094 1 None planning) VLANMAP
Transport
Planning(Internal
0~7 0 0 planning) VLANMAP
Transport
Planning(Internal
0~3 0 None planning) VLANMAP
Transport
Planning(Internal
DISABLE, ENABLE ENABLE(Enable) ENABLE(Enable) planning) VLANMAP
Default/Recommen
0~7 None None ded Value VRF
Transport
Planning(Internal
0~255 None None planning) VRF
Equipment
0~125 None None Planning ALD
0~2 characters None None N/A ALD

0~49 characters NULL(empty string) None Engineering Design ALD
Equipment
0~62 0 None Planning ALD
Equipment
4~5,60~254 None None Planning ALD
Equipment
0~8 None None Planning ALD
AISG1.1, AISG2.0,
3GPP, UNKNOWN None None N/A ALD
0~8 None None N/A ALD
Equipment
0~2 characters NULL(empty string) None Planning ALD
Equipment
0~36 characters NULL(empty string) None Planning ALD

SINGLE_RET,
STMA, MULTI_RET None None N/A ALD
R0A, R0B,
RET_PORT, R0C,
R0D, R0E, R0F,
R0G, R0H, NULL None None N/A ALD
Equipment
0~62 None None Planning ANTENNAPORT
Equipment
4~5,60~254 None None Planning ANTENNAPORT
Equipment
0~8 None None Planning ANTENNAPORT
R0A, R0B, R0C,
R0D, R0E, R0F, Equipment
R0G, R0H None None Planning ANTENNAPORT
0~1000(metric 0(metric
system);0~3281(im system);0(imperial Equipment
perial system) system) None Planning ANTENNAPORT
Equipment
0~4000 100 None Planning ANTENNAPORT
Equipment
0~4000 100 None Planning ANTENNAPORT
ON, OFF OFF(OFF) None Engineering Design ANTENNAPORT

UER_SELF_DEFIN
E,
TMA12DB_ONLY_
NON_AISG,
TMA24DB_ONLY_
NON_AISG,
RET_ONLY_COAXI
AL, UER_SELF_DEFIN
TMA12DB_AISG, E(USER_DEFINED
TMA24DB_AISG ) None Engineering Design ANTENNAPORT
0~3500 40 None Engineering Design ANTENNAPORT


0~3500 None None N/A ANTENNAPORT
ON, OFF, NULL None None N/A ANTENNAPORT
SINGLE_RET, Equipment
MULTI_RET None None Planning RET
Equipment
SINGLE, DUAL DUAL(DUAL) None Planning RET
REGULAR,
DAISY_CHAIN,
SECTOR_SPLITTI
NG, Equipment
2G_EXTENSION None None Planning RET
Equipment
1~8 1 None Planning RET
Equipment
0~125 None None Planning RET
0~2 characters None None N/A RET

0~49 characters NULL(empty string) None Engineering Design RET
Equipment
0~62 0 None Planning RET
Equipment
4~5,60~254 None None Planning RET
Equipment
0~8 None None Planning RET
AISG1.1, AISG2.0,
3GPP, UNKNOWN None None N/A RET
0~8 None None N/A RET

Equipment
0~2 characters NULL(empty string) None Planning RET
Equipment
0~36 characters NULL(empty string) None Planning RET
SINGLE_RET,
STMA, MULTI_RET None None N/A RET
R0A, R0B,
RET_PORT, R0C,
R0D, R0E, R0F,
R0G, R0H, NULL None None N/A RET
Equipment
0~125 None None Planning RETDEVICEDATA
Equipment
1~8 None None Planning RETDEVICEDATA
0~359 0 None Engineering Design RETDEVICEDATA
0~15 characters NULL(empty string) None Engineering Design RETDEVICEDATA

0~25.5, step:0.1 0 None Engineering Design RETDEVICEDATA

-10~30, step:0.1 0 None Engineering Design RETDEVICEDATA
UNUSED, BandI,
BandII, BandIII,
BandIV, BandV,
BandVI, BandVII,
BandVIII, BandIX, UNUSED(UNUSED
BandX ) None Engineering Design RETDEVICEDATA
UNUSED, BandI,
BandII, BandIII,
BandIV, BandV,
BandVI, BandVII,
UNUSED, BandI,
BandII, BandIII,
BandIV, BandV,
BandVI, BandVII,
UNUSED, BandI,
BandII, BandIII,
BandIV, BandV,
BandVI, BandVII,
-3276.8~3276.7,
step:0.1 None None N/A RETDEVICEDATA
-3276.8~3276.7,
step:0.1 None None N/A RETDEVICEDATA
UNUSED, BandI,
BandII, BandIII,
BandIV, BandV,
BandVI, BandVII,
BandVIII, BandIX,
BandX, NULL None None N/A RETDEVICEDATA
UNUSED, BandI,
BandII, BandIII,
BandIV, BandV,
BandVI, BandVII,
BandVIII, BandIX,
UNUSED, BandI,
BandII, BandIII,
BandIV, BandV,
BandVI, BandVII,
BandVIII, BandIX,
UNUSED, BandI,
BandII, BandIII,
BandIV, BandV,
BandVI, BandVII,
BandVIII, BandIX,
0~359 None None N/A RETDEVICEDATA
0~25.5, step:0.1 None None N/A RETDEVICEDATA
Equipment
0 None None Planning RETPORT
Equipment
60~254 None None Planning RETPORT
Equipment
0 None None Planning RETPORT
Equipment
RET_PORT None None Planning RETPORT
ON, OFF OFF(OFF) None Engineering Design RETPORT

UER_SELF_DEFIN
E, UER_SELF_DEFIN
RET_ONLY_MULTI E(USER_DEFINED
CORE ) None Engineering Design RETPORT
0~3500 40 None Engineering Design RETPORT


0~3500 None None N/A RETPORT
ON, OFF, NULL None None N/A RETPORT
Equipment
0~125 None None Planning RETSUBUNIT
Equipment
1~8 None None Planning RETSUBUNIT
AVAILABLE,
UNAVAILABLE,
BREAKLINK,
RESERVED None None N/A RETSUBUNIT
-10~30, step:0.1 None None N/A RETSUBUNIT
0~65535 None None N/A RETSUBUNIT
0~62,255 255 None Engineering Design RETSUBUNIT

4~5,60~255 255 None Engineering Design RETSUBUNIT
R0A, R0B, R0C,
R0D, R0E, R0F,
R0G, R0H R0A(R0A) None Engineering Design RETSUBUNIT
4~5,60~255 255 None Engineering Design RETSUBUNIT
R0A, R0B, R0C,
R0D, R0E, R0F,
R0G, R0H R0B(R0B) None Engineering Design RETSUBUNIT
-10~30,3276.7,
step:0.1 32767 None Engineering Design RETSUBUNIT
0~1, step:0.1 5 None Engineering Design RETSUBUNIT

0~49 characters NULL(empty string) None Engineering Design RETSUBUNIT
Equipment
1~2 None None Planning TMA
Equipment
0~2 characters None None N/A TMA

0~49 characters NULL(empty string) None Engineering Design TMA
Equipment
0~62 0 None Planning TMA
Equipment
4~5,60~254 None None Planning TMA
Equipment
AISG1.1, AISG2.0,
3GPP, UNKNOWN None None N/A TMA
0~8 None None N/A TMA
Equipment
0~2 characters NULL(empty string) None Planning TMA
Equipment
0~36 characters NULL(empty string) None Planning TMA
SINGLE_RET,
STMA, MULTI_RET None None N/A TMA
R0A, R0B,
RET_PORT, R0C,
R0D, R0E, R0F,
R0G, R0H, NULL None None N/A TMA
Equipment
0~125 None None Planning TMADEVICEDATA
Equipment
1~2 None None Planning TMADEVICEDATA
0~359 0 None Engineering Design TMADEVICEDATA
0~32 characters NULL(empty string) None Engineering Design TMADEVICEDATA

0~25.5, step:0.1 0 None Engineering Design TMADEVICEDATA
-10~30, step:0.1 0 None Engineering Design TMADEVICEDATA

UNUSED, BandI,
BandII, BandIII,
BandIV, BandV,
BandVI, BandVII,
BandX ) None Engineering Design TMADEVICEDATA
UNUSED, BandI,
BandII, BandIII,
BandIV, BandV,
BandVI, BandVII,
UNUSED, BandI,
BandII, BandIII,
BandIV, BandV,
BandVI, BandVII,
UNUSED, BandI,
BandII, BandIII,
BandIV, BandV,
BandVI, BandVII,
0~1073741823.75,
step:0.25 None None N/A TMADEVICEDATA
0~1073741823.75,
step:0.25 None None N/A TMADEVICEDATA
UNSUPPORT,
SUPPORT_BYPAS
S,
SUPPORT_VSWR,
VSWR/BYPASS,
NULL None None N/A TMADEVICEDATA
0~63.75, step:0.25 None None N/A TMADEVICEDATA
UNUSED, BandI,
BandII, BandIII,
BandIV, BandV,
BandVI, BandVII,
BandVIII, BandIX,
BandX, NULL None None N/A TMADEVICEDATA
UNUSED, BandI,
BandII, BandIII,
BandIV, BandV,
BandVI, BandVII,
BandVIII, BandIX,
UNUSED, BandI,
BandII, BandIII,
BandIV, BandV,
BandVI, BandVII,
BandVIII, BandIX,
UNUSED, BandI,
BandII, BandIII,
BandIV, BandV,
BandVI, BandVII,
BandVIII, BandIX,
0~359 None None N/A TMADEVICEDATA

0~65535 0 None N/A TMADEVICEDATA
Equipment
0~125 None None Planning TMASUBUNIT
Equipment
1~2 None None Planning TMASUBUNIT
0~17 None None N/A TMASUBUNIT
0~1073741823.75,
step:0.25 None None N/A TMASUBUNIT
NORMAL,
BYPASS, NULL None None N/A TMASUBUNIT
AVAILABLE,
UNAVAILABLE,
BREAKLINK,
RESERVED None None N/A TMASUBUNIT
R0A, R0B, R0C,

R0D, R0E, R0F,
R0G, R0H R0A(R0A) None Engineering Design TMASUBUNIT
0~62,255 255 None Engineering Design TMASUBUNIT
0~8,255 255 None Engineering Design TMASUBUNIT
4~5,60~255 255 None Engineering Design TMASUBUNIT
0~63.75, step:0.25 255 None Engineering Design TMASUBUNIT

NORMAL,
BYPASS,
DEVICE_DEFAULT NORMAL(NORMAL
_VALUE ) None Engineering Design TMASUBUNIT
Equipment
0~62 None None Planning VANTENNAPORT
Equipment
Equipment
R0A, R0B, R0C,
R0D, R1A, R1B,
R1C, R1D, R2A,
R2B, R2C, R2D,
R3A, R3B, R3C,
R3D, R4A, R4B,
R4C, R4D, R5A,
R5B, R5C, R5D,
R6A, R6B, R6C,
R6D, R7A, R7B, Equipment
R7C, R7D, NULL None None Planning VANTENNAPORT
Equipment
60~254 None None Planning VRET
Equipment
Equipment
Equipment
Equipment
0~64 characters NULL(empty string) None Planning VRET
Equipment
8 8 None Planning VRET
Equipment
0~62 None None Planning VRETSUBUNIT
R0A, R0B, R0C,

R0D, R1A, R1B,
R1C, R1D, R2A,
R2B, R2C, R2D,
R3A, R3B, R3C,
R3D, R4A, R4B,
R4C, R4D, R5A,
R5B, R5C, R5D,
R6A, R6B, R6C,
R6D, R7A, R7B,
R7C, R7D, NULL NULL(NULL) None Engineering Design VRETSUBUNIT
R0A, R0B, R0C,
R0D, R1A, R1B,
R1C, R1D, R2A,
R2B, R2C, R2D,
R3A, R3B, R3C,
R3D, R4A, R4B,
R4C, R4D, R5A,
R5B, R5C, R5D,
R6A, R6B, R6C,
R6D, R7A, R7B,
Equipment
0~64 characters None None Planning VRETSUBUNIT
Equipment
NEGATIVE_45,
POSITIVE_45,
HORIZONTAL,
VERTICAL, LEFT,
RIGHT, POSITIVE_NEGATI
POSITIVE_NEGATI VE_45(POSITIVE_ Equipment
VE_45 NEGATIVE_45) None Planning VRETSUBUNIT
Equipment
Equipment
Equipment
R0A, R0B, R0C,
R0D, R1A, R1B,
R1C, R1D, R2A,
R2B, R2C, R2D,
R3A, R3B, R3C,
R3D, R4A, R4B,
R4C, R4D, R5A,
R5B, R5C, R5D,
R6A, R6B, R6C,
R6D, R7A, R7B,
NEGATIVE_45,
POSITIVE_45,
HORIZONTAL,
VERTICAL, LEFT,
-15~15,3276.7,
step:0.1 32767 None Engineering Design VRETSUBUNIT
-15~15,3276.7,
R0A, R0B, R0C,
R0D, R1A, R1B,
R1C, R1D, R2A,
R2B, R2C, R2D,
R3A, R3B, R3C,
R3D, R4A, R4B,
R4C, R4D, R5A,
R5B, R5C, R5D,
R6A, R6B, R6C,
R6D, R7A, R7B,
NEGATIVE_45,
POSITIVE_45,
HORIZONTAL,
VERTICAL, LEFT,
NEGATIVE_45,
POSITIVE_45,
HORIZONTAL,
VERTICAL, LEFT,
Equipment
0,1,2,4 0 None Planning VRETSUBUNIT
-30,0,30,3276.7,
33,65,6553.5,
Equipment
0~255 None None Planning CTRLLNK
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Default/Recommen
DISABLE, ENABLE DISABLE(Disable) DISABLE(Disable) ded Value CHK
Default/Recommen
0 0 0 ded Value BITS
Default/Recommen
0~7 0 0 ded Value BITS
Default/Recommen
Default/Recommen
DEACTIVATED,
ACTIVATED None None N/A BITS
UNAVAILABLE,
AVAILABLE None None N/A BITS
Default/Recommen
Default/Recommen
0 0 0 ded Value LINECLK
Default/Recommen
0~7 0 0 ded Value LINECLK
Default/Recommen
Default/Recommen
Default/Recommen
E1T1, STM1 E1T1(E1T1) None ded Value LINECLK
Default/Recommen
DEACTIVATED,
ACTIVATED None None N/A LINECLK
UNAVAILABLE,
AVAILABLE None None N/A LINECLK
Default/Recommen
Default/Recommen
0 0 0 ded Value PEERCLK
UMTS, GSM, LTE, DEFAULT(DEFAUL Default/Recommen

COMM, DEFAULT T) None ded Value PEERCLK
DEACTIVATED,
ACTIVATED None None N/A PEERCLK
UNAVAILABLE,
AVAILABLE None None N/A PEERCLK
Default/Recommen
0~1 0 0 ded Value TOD
Default/Recommen
IN, OUT IN(Input) IN(Input) ded Value TOD
Default/Recommen
Default/Recommen
Default/Recommen
0~7 0 None ded Value TOD
TWISTED-PAIR, TWISTED- Equipment

COAXIAL PAIR(Twisted-Pair) None Planning TOD
perial system) system) None Planning TOD
DEACTIVATED,
ACTIVATED None None N/A TOD
UNAVAILABLE,
AVAILABLE None None N/A TOD
0~100000 None 0 N/A TOD
Default/Recommen
Default/Recommen
0~17 0 0 ded Value GPS
Default/Recommen
Default/Recommen
0~1,60~254 0 0 ded Value GPS
Default/Recommen
0~7 7 None ded Value GPS
USER_CONFIG,
SEARCH_WITH_D
URATION,
SEARCH_WITH_P
RECISION, AUTO_SEARCH(A Default/Recommen
AUTO_SEARCH uto Search) None ded Value GPS
-180~180, step:1e- Equipment

6 0 None Planning GPS
Equipment
-90~90, step:1e-6 0 None Planning GPS
-
1000~10000(metric
system);- 0(metric
3281~32808(imperi system);0(imperial Equipment
al system) system) None Planning GPS
Equipment
0~89 5 None Planning GPS
0~100000 None 0 N/A GPS
Default/Recommen
1~2880 1 None ded Value GPS
system);3~328(imp system);3(imperial Default/Recommen
erial system) system) None ded Value GPS
TWISTED-PAIR, Equipment
COAXIAL COAXIAL(Coaxial) None Planning GPS
perial system) system) None Planning GPS
1~63 characters None None N/A GPS
Lock, Unlock None None N/A GPS

Valid, Invalid None None N/A GPS
NotFixed, Fixed None None N/A GPS
Enabled, Disabled None None N/A GPS
0~100 None None N/A GPS
NOTEXIST,
ANTENNASHORTE
D,
ANTENNAOPENE
D,
SELF_CHECK_FAI
LURE,
COMEXCEPTION,
NORMAL,
UNKNOWN,
USCUINVALID,
UNKNOWN_STAR
_CARD None None N/A GPS
M12M, UT, RT,
JPS15L, K161,
GG16, JNS100,
RGPS, CWAIN,
RTSMT, UBLOX5,
BD7702, NAVIOR,
PPSTOD, M1000,
TRGPS,
BD7702CMS,
OEM4, N24MS,
UNKNOWN None None N/A GPS

GPS, GLONASS,
GPS/GLONASS,
COMPASS,
COMPASS/GPS, Default/Recommen
GPS/COMPASS GPS(GPS) GPS(GPS) ded Value GPS
DEACTIVATED,
ACTIVATED None None N/A GPS
Default/Recommen
HOLDED, UNHOLDED(UNHO
UNHOLDED LDED) None N/A GPS
Default/Recommen
0~1 0 0 ded Value IPCLKLNK
HW_DEFINED, Default/Recommen
PTP PTP(PTP Protocol) PTP(PTP Protocol) ded Value IPCLKLNK
Default/Recommen
Default/Recommen
Default/Recommen
0~7 7 None ded Value IPCLKLNK
Transport
Planning(Internal
Valid IP address 0.0.0.0 None planning) IPCLKLNK
Transport
Planning(Internal
Valid IP address 0.0.0.0 None planning) IPCLKLNK
Transport
Planning(Internal
0~255 0 0 planning) IPCLKLNK
Transport
Planning(Internal
E2E, P2P E2E(E2E) E2E(E2E) planning) IPCLKLNK
Default/Recommen
OFF, ON ON(ON) ON(ON) ded Value IPCLKLNK
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
0~4294967295 None None N/A IPCLKLNK

Default/Recommen
NO, YES NO(NO) NO(NO) ded Value IPCLKLNK
Default/Recommen
14 characters 0000-0000-0000 None ded Value IPCLKLNK
DEACTIVATED,
ACTIVATED None None N/A IPCLKLNK
UNAVAILABLE,
AVAILABLE None None N/A IPCLKLNK
UNICAST,
L3_MULTICAST, Default/Recommen
L2_MULTICAST UNICAST(Unicast) UNICAST(Unicast) ded Value IPCLKLNK
Default/Recommen
-100000~100000 0 0 ded Value IPCLKLNK
0~4294967295 0 None N/A IPCLKLNK
ONE_STEP,
TWO_STEP None None N/A IPCLKLNK
0~4094 None None N/A IPCLKLNK
Default/Recommen
1/16, 1/8, 1/4, 1/2, Default/Recommen

1.0, 2.0, 4.0, 8.0 1/2(1/2) None ded Value IPCLKLNK
1/2, 1.0, 2.0, 4.0,
8.0, 16.0, 32.0, Default/Recommen
64.0, 128.0 16.0(16.0) None ded Value IPCLKLNK
Default/Recommen
Default/Recommen
1588V2, G.8265.1 1588V2(1588V2) None ded Value IPCLKLNK
Default/Recommen
Default/Recommen
IPV4, IPV6 IPV4(IPv4) None ded Value IPCLKLNK
Transport
Planning(Internal
Valid IP address 0:0:0:0:0:0:0:0 None planning) IPCLKLNK
Transport
Planning(Internal
Valid IP address 0:0:0:0:0:0:0:0 None planning) IPCLKLNK
Default/Recommen
Valid IP address 0.0.0.0 None ded Value IPCLKLNK
1/2, 1.0, 2.0, 4.0, Default/Recommen

8.0, 16.0 1.0(1.0) None ded Value IPCLKLNK
Default/Recommen
0~1 0 0 ded Value SYNCETH
Default/Recommen
Default/Recommen
Default/Recommen
0~7 7 None ded Value SYNCETH
Default/Recommen
DISABLE(DISABLE Default/Recommen
DISABLE, ENABLE ) None ded Value SYNCETH
DEACTIVATED,
ACTIVATED None None N/A SYNCETH
UNAVAILABLE,
AVAILABLE None None N/A SYNCETH
Default/Recommen
Default/Recommen
IN, OUT IN(Input) None ded Value SYNCETH
0, 1, 2, 3, 4, 5, 6, 7,
8, 9, 10, 11, 12, 13,
14, 15, 16, 17, Default/Recommen
AUTO 0(0) None ded Value TASM
GPS, BITS, IPCLK,
SYNCETH,
LINECLK, TOD,
PEERCLK,
SYNCETH+IPCLK, Default/Recommen
GPS+SYNCETH GPS(GPS Clock) GPS(GPS Clock) ded Value TASM
AUTO, MANUAL, Default/Recommen
FREE FREE(Free) MANUAL(Manual) ded Value TASM
DEFAULT,
CLASSA, CLASSB, DEFAULT(DEFAUL DEFAULT(DEFAUL Default/Recommen
CUSTOM T) T) ded Value TASM
Default/Recommen
3~120 4 4 ded Value TASM
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
ABSOLUTE, Default/Recommen
RELATIVE, OFF OFF(OFF) OFF(OFF) ded Value TASM
Default/Recommen
Default/Recommen
00:00:00~23:59:59 0:00:00 None ded Value TASM
Default/Recommen
FREQ, TIME FREQ(FREQ) None ded Value TASM
NORMAL, LOST,
UNAVAILABLE,
FREDVAT, JITTER,
PHASEOUTSCOP
E, UNKNOWN,
DIFFSRC None None N/A TASM
FREERUNNING,
FASTTRACKING,
LOCKED,
HOLDOVER,
UNKNOWN None None N/A TASM
GPS, BITS, IPCLK,
SYNCETH,
LINECLK, TOD,
PEERCLK,
SYNCETH+IPCLK,
GPS+SYNCETH None None N/A TASM
0~7 None 0 N/A TASM
0~1 None 0 N/A TASM

0~7 None None N/A TASM
QL-PRC, QL-SSU-
A, QL-SSU-B, QL-
EEC2, QL-EEC1, QL-SSU-B(QL- Default/Recommen
QL-DNU SSU-B) None ded Value TASM
NOT_STARTED,
SUCCEED,
TRACKING,
FAILED None None N/A TASM
It is recommended
that this parameter
be set to its default
value, 300 seconds,
in normal
conditions. If the
network jitter is
large, set this
parameter to 480
seconds and the
Soft-synchronized
Network Adaptive
300SEC(300 Mode parameter to Default/Recommen
300SEC, 480SEC Seconds) ENH. ded Value TASM
If the network jitter

is large, this
parameter is set to
AissNetModeEnh.
Otherwise, this
GEN(General parameter is set to Default/Recommen
GEN, ENH Mode) AissNetModeGen. ded Value TASM
Default/Recommen
ON, OFF OFF(Off) None ded Value TASM
Default/Recommen
0~7 0 None ded Value TASM
Default/Recommen
0~10 0 None ded Value TASM
Radio Planning
0~23 None None (Internal planning) BASEBANDEQM
Radio Planning
UL, DL, ULDL None None (Internal planning) BASEBANDEQM
NULL,
DEM_4_CHAN,
DEM_ECON_4_CH Radio Planning
AN, DEM_2_CHAN None None (Internal planning) BASEBANDEQM
Equipment
0~12 None None Planning BASEBANDEQM
Equipment
0~7 0 None Planning BASEBANDEQM
Equipment
0~5 None None Planning BASEBANDEQM
Equipment
0~1 0 None Planning BASEBANDEQM
Radio Planning
0~65535 None None (Internal planning) SECTOR
Radio Planning
0~31 characters NULL(empty string) None (Internal planning) SECTOR
Equipment
0~63 characters NULL(empty string) None Planning SECTOR
Radio Planning
0~255 characters NULL(empty string) None (Internal planning) SECTOR
Equipment
0~216 None None Planning SECTOR
R0A, R0B, R0C,
R0D, R0E, R0F,
R0G, R0H, R1A,
R1B, R1C, R1D,
R2A, R2B, R2C,
R2D, R3A, R3B,
R3C, R3D, R4A,
R4B, R4C, R4D,
R5A, R5B, R5C,
R5D, R6A, R6B,
R6C, R6D, R7A, Equipment
R7B, R7C, R7D None None Planning SECTOR
Equipment
Equipment
Equipment
4~5,60~254 None None Planning SECTOR
0~40 characters None None N/A SECTOR
0~40 characters None None N/A SECTOR

GL_LICENSE,
UL_LICENSE,
CL_LICENSE,
GU_LICENSE,
CU_LICENSE None None N/A SECTOR
NORMAL,
ABNORMAL None None N/A SECTOR
Radio Planning
0~65535 None None (Internal planning) SECTOREQM
Radio Planning
0~65535 None None (Internal planning) SECTOREQM
Equipment
0~216 None None Planning SECTOREQM
R0A, R0B, R0C,
R0D, R0E, R0F,
R0G, R0H, R1A,
R1B, R1C, R1D,
R2A, R2B, R2C,
R2D, R3A, R3B,
R3C, R3D, R4A,
R4B, R4C, R4D,
R5A, R5B, R5C,
R5D, R6A, R6B,
R6C, R6D, R7A, Equipment
R7B, R7C, R7D None None Planning SECTOREQM
Equipment
RX_MODE,
TX_MODE, Radio Planning
RXTX_MODE None None (Internal planning) SECTOREQM
Equipment
Equipment
4~5,60~254 None None Planning SECTOREQM
Radio Planning
MASTER, SLAVE MASTER(Master) None (Internal planning) SECTOREQM
Equipment
0~7 None None Planning BRI
Equipment
Equipment
Equipment
UBRI None None Planning BRI
BLOCKED, UNBLOCKED(Unbl
UNBLOCKED ocked) None Engineering Design BRI
0~4294967295 0 None Engineering Design BRI

IMMEDIATE,
SHUTDOWN, IMMEDIATE(Immed
DELAY iate) None Engineering Design BRI
Alarm_0, Alarm_1,
Alarm_2, Alarm_3,
Alarm_4, Alarm_5,
Alarm_6, Alarm_7,
Alarm_8, Alarm_9,
Alarm_10,
Alarm_11,
Alarm_12,
Alarm_13,
Alarm_14,
Alarm_15 None None N/A BRI
Enabled, Disabled None None N/A BRI

Avail_0, Avail_1,
Avail_20, Avail_21,
Avail_500,
Avail_501,
Avail_504,
Avail_508,
Avail_509,
Avail_520,
Avail_521,
Avail_524,
Avail_528,
Avail_529,
Avail_800,
Avail_801,
Avail_820,
Avail_821,
Avail_c10,
Avail_c11,
Avail_c12,
Avail_c13,
Avail_c14,
Avail_c30,
Avail_c31,
Avail_c32,
Avail_c33,
Avail_c34,
Avail_d00,
Avail_d01,
Avail_d04,
Avail_d08,
Avail_d09,
Avail_d20,
Avail_d21,
Avail_d24,
Avail_d28,
Avail_d29 None None N/A BRI
0~2047 characters None None N/A BRI

UMPT, UBBP, FAN,
UPEU, PMU, PSU,
BAT, TCU, EMU,
UTRP, USCU,
UEIU, FMU, MRRU,
MRFU, RHUB,
UBRI, MRXU,
MTXU, UCIU, CCU,
SMPT, UCXU,
AAMU, AARU,
UNKNOWN, PRRU,
MPRU, MPMU,
MPRF, AIRU,
GTMU, GBBP,
GRRU, GRFU,
GATM, DRFU,
WMPT, WBBP,
WRFU, NGRU,
LMPT, LBBP,
LRRU, LRFU,
BMPT, BBBI,
BRFU, CRFU,
UBBPX None None N/A BRI
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A BRI
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A BRI
CABINET,
SUBRACK,
BOARD,
SUBBOARD, SFP,
GPS None None N/A BRI
Equipment
0~7 None None Planning GTMU
Equipment
0~1 None None Planning GTMU
Equipment
6 None None Planning GTMU
Equipment
GTMU None None Planning GTMU
BLOCKED, UNBLOCKED(Unbl
UNBLOCKED ocked) None Engineering Design GTMU
0~4294967295 0 None Engineering Design GTMU

IMMEDIATE,
SHUTDOWN, IMMEDIATE(Immed
DELAY iate) None Engineering Design GTMU
Alarm_0, Alarm_1,
Alarm_2, Alarm_3,
Alarm_4, Alarm_5,
Alarm_6, Alarm_7,
Alarm_8, Alarm_9,
Alarm_10,
Alarm_11,
Alarm_12,
Alarm_13,
Alarm_14,
Alarm_15 None None N/A GTMU
Enabled, Disabled None None N/A GTMU

Avail_0, Avail_1,
Avail_20, Avail_21,
Avail_500,
Avail_501,
Avail_504,
Avail_508,
Avail_509,
Avail_520,
Avail_521,
Avail_524,
Avail_528,
Avail_529,
Avail_800,
Avail_801,
Avail_820,
Avail_821,
Avail_c10,
Avail_c11,
Avail_c12,
Avail_c13,
Avail_c14,
Avail_c30,
Avail_c31,
Avail_c32,
Avail_c33,
Avail_c34,
Avail_d00,
Avail_d01,
Avail_d04,
Avail_d08,
Avail_d09,
Avail_d20,
Avail_d21,
Avail_d24,
Avail_d28,
Avail_d29 None None N/A GTMU
0~2047 characters None None N/A GTMU

UMPT, UBBP, FAN,
UPEU, PMU, PSU,
BAT, TCU, EMU,
UTRP, USCU,
UEIU, FMU, MRRU,
MRFU, RHUB,
UBRI, MRXU,
MTXU, UCIU, CCU,
SMPT, UCXU,
AAMU, AARU,
UNKNOWN, PRRU,
MPRU, MPMU,
MPRF, AIRU,
GTMU, GBBP,
GRRU, GRFU,
GATM, DRFU,
WMPT, WBBP,
WRFU, NGRU,
LMPT, LBBP,
LRRU, LRFU,
BMPT, BBBI,
BRFU, CRFU,
UBBPX None None N/A GTMU
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A GTMU
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A GTMU
CABINET,
SUBRACK,
BOARD,
SUBBOARD, SFP,
GPS None None N/A GTMU
Equipment
0~64 characters NULL(empty string) None Planning LOCATION
-
32767~32767(metri
c system);- 0(metric
107502~107502(im system);0(imperial Equipment
perial system) system) None Planning LOCATION
Equipment
Equipment
Equipment
Degree, Second Degree(Degree) None Planning LOCATION
Equipment
-90~90 0 None Planning LOCATION
Equipment
0~64 characters 0:00:00 None Planning LOCATION
Equipment
0~65535 0 None Planning LOCATION
Equipment
0~64 characters None None Planning LOCATION
Equipment
-180~180 0 None Planning LOCATION
Equipment
0~64 characters 0:00:00 None Planning LOCATION
Equipment
system);3~328080(i system);3(imperial Equipment
mperial system) system) None Planning LOCATION
Equipment
Equipment
Equipment
perial system) system) None Planning LOCATION
DISABLE(DISABLE Equipment MAINSALARMBIN

DISABLE, ENABLE ) None Planning D
Equipment MAINSALARMBIN
0~62 0 None Planning D
0~1,7~8,11~12,14~ Equipment MAINSALARMBIN

15,40~59,60~254 0 None Planning D
0~2,18~19 0 None Planning D
0~35 0 None Planning D
Equipment
0~64 characters NULL(empty string) None Planning NE
Equipment
0~64 characters None None Planning NE
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
1~64 characters 0 None Planning NE
DBS3900_LTE,
BTS3900_LTE,
BTS3900A_LTE,
BTS3900L_LTE,
BTS3900AL_LTE, DBS3900_LTE(DB Equipment
DBS3900A_LTE S3900 LTE) None Planning NODE
Equipment
0~256 characters NULL(empty string) None Planning NODE
Equipment
0~64 characters None None Planning NODE
Equipment
0~64 1 None Planning NODE
Equipment
1~64 characters Node None Planning NODE
NON-
NON- CONCURRENT(No Equipment
CONCURRENT n-ConCurrent) None Planning NODE
Equipment
0~7 0 None Planning BBP
Equipment
0~1 0 None Planning BBP
Equipment
0~5 None None Planning BBP
UBBP, GBBP, Equipment

WBBP, LBBP None LBBP(LBBP) Planning BBP
FDD, TDD,
HYBRID,
TDD_ENHANCE,
TDD_8T8R, FDD(Frequency FDD(Frequency Radio Planning
TDD_TL, FDD_ATG Division Duplex) Division Duplex) (Internal planning) BBP
BLOCKED, UNBLOCKED(Unbl UNBLOCKED(Unbl

UNBLOCKED ocked) ocked) Engineering Design BBP
0~4294967295 0 0 Engineering Design BBP

IMMEDIATE,
SHUTDOWN, IMMEDIATE(Immed IMMEDIATE(Immed
DELAY iate) iate) Engineering Design BBP
Radio Planning
NORMAL, FULL FULL(FULL) FULL(FULL) (Internal planning) BBP
Radio Planning
OFF, ON OFF(Off) None (Internal planning) BBP
NULL, UMTS NULL(NULL) None Engineering Design BBP
0~256 characters None None N/A BBP
Alarm_0, Alarm_1,
Alarm_2, Alarm_3,
Alarm_4, Alarm_5,
Alarm_6, Alarm_7,
Alarm_8, Alarm_9,
Alarm_10,
Alarm_11,
Alarm_12,
Alarm_13,
Alarm_14,
Alarm_15 None None N/A BBP
Enabled, Disabled None None N/A BBP
Avail_0, Avail_1,
Avail_20, Avail_21,
Avail_500,
Avail_501,
Avail_504,
Avail_508,
Avail_509,
Avail_520,
Avail_521,
Avail_524,
Avail_528,
Avail_529,
Avail_800,
Avail_801,
Avail_820,
Avail_821,
Avail_c10,
Avail_c11,
Avail_c12,
Avail_c13,
Avail_c14,
Avail_c30,
Avail_c31,
Avail_c32,
Avail_c33,
Avail_c34,
Avail_d00,
Avail_d01,
Avail_d04,
Avail_d08,
Avail_d09,
Avail_d20,
Avail_d21,
Avail_d24,
Avail_d28,
Avail_d29 None None N/A BBP

UMPT, UBBP, FAN,
UPEU, PMU, PSU,
BAT, TCU, EMU,
UTRP, USCU,
UEIU, FMU, MRRU,
MRFU, RHUB,
UBRI, MRXU,
MTXU, UCIU, CCU,
SMPT, UCXU,
AAMU, AARU,
UNKNOWN, PRRU,
MPRU, MPMU,
MPRF, AIRU,
GTMU, GBBP,
GRRU, GRFU,
GATM, DRFU,
WMPT, WBBP,
WRFU, NGRU,
LMPT, LBBP,
LRRU, LRFU,
BMPT, BBBI,
BRFU, CRFU,
UBBPX None None N/A BBP
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A BBP
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A BBP
CABINET,
SUBRACK,
BOARD,
SUBBOARD, SFP,
GPS None None N/A BBP
Equipment
0~255 None None Planning BBPLINK
Equipment
Equipment
Equipment
Equipment
6 6 None Planning BBPLINK
Equipment
Equipment
Equipment
Equipment
6 6 None Planning BBPLINK
LBR0, LBR1, LBR2,

LBR3, LBR4, LBR5,
LBR6 LBR1(1.25) None N/A BBPLINK
0~7 None None N/A BBPLINK
6 None None N/A BBPLINK

6 None None N/A BBPLINK
LBR0, LBR1, LBR2,

LBR3, LBR4, LBR5,
LBR6 LBR1(1.25) None N/A BBPLINK
Equipment
0~7 None None Planning BBUFAN
Equipment
0~1 None None Planning BBUFAN
Equipment
16 None None Planning BBUFAN
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A BBUFAN
0~100 None None N/A BBUFAN
Alarm_0, Alarm_1,
Alarm_2, Alarm_3,
Alarm_4, Alarm_5,
Alarm_6, Alarm_7,
Alarm_8, Alarm_9,
Alarm_10,
Alarm_11,
Alarm_12,
Alarm_13,
Alarm_14,
Alarm_15 None None N/A BBUFAN
Enabled, Disabled None None N/A BBUFAN

Avail_0, Avail_1,
Avail_20, Avail_21,
Avail_500,
Avail_501,
Avail_504,
Avail_508,
Avail_509,
Avail_520,
Avail_521,
Avail_524,
Avail_528,
Avail_529,
Avail_800,
Avail_801,
Avail_820,
Avail_821,
Avail_c10,
Avail_c11,
Avail_c12,
Avail_c13,
Avail_c14,
Avail_c30,
Avail_c31,
Avail_c32,
Avail_c33,
Avail_c34,
Avail_d00,
Avail_d01,
Avail_d04,
Avail_d08,
Avail_d09,
Avail_d20,
Avail_d21,
Avail_d24,
Avail_d28,
Avail_d29 None None N/A BBUFAN
0~2047 characters None None N/A BBUFAN

UMPT, UBBP, FAN,
UPEU, PMU, PSU,
BAT, TCU, EMU,
UTRP, USCU,
UEIU, FMU, MRRU,
MRFU, RHUB,
UBRI, MRXU,
MTXU, UCIU, CCU,
SMPT, UCXU,
AAMU, AARU,
UNKNOWN, PRRU,
MPRU, MPMU,
MPRF, AIRU,
GTMU, GBBP,
GRRU, GRFU,
GATM, DRFU,
WMPT, WBBP,
WRFU, NGRU,
LMPT, LBBP,
LRRU, LRFU,
BMPT, BBBI,
BRFU, CRFU,
UBBPX None None N/A BBUFAN
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
CABINET,
SUBRACK,
BOARD,
SUBBOARD, SFP,
GPS None None N/A BBUFAN
Equipment
0~62 None None Planning CCU
Radio Planning
15 15 15 (Internal planning) CCU
Radio Planning
0 0 0 (Internal planning) CCU
Equipment
0~62 0 None Planning CCU
Equipment
0~1 0 None Planning CCU
Equipment
0~1 0 0 Planning CCU
Based on the Equipment

NO, YES YES(YES) physical connection Planning CCU
Equipment
1~7 None None Planning CCU
GSM:NO, Based on the Equipment
GSM, UMTS, LTE UMTS:NO, LTE:NO physical connection Planning CCU
It is recommended
that Water-
Water-Immersed Immersed Sensor
Sensor Disabled be set to
Disabled:ON, Smog ON, Smog Sensor
WS_DISABLE, Sensor Disabled be set to Equipment
SS_DISABLE Disabled:ON ON. Planning CCU
CONNECTED,
DISCONNECTED None None N/A CCU
CONNECTED,
DISCONNECTED None None N/A CCU
0~4294967295 None None N/A CCU
Default/Recommen
0~249 0 None ded Value CPRILBR
Equipment
0~7 None None Planning CASCADEPORT
Equipment
Equipment
0~6,8 None None Engineering Design CASCADEPORT
BasicCascadePort,
ExpandedCascade
Port None None Engineering Design CASCADEPORT
OFF, ON OFF(Off) None Engineering Design CASCADEPORT
Equipment
0~62 0 None Planning CPRIPORT
Equipment
0~1,4~5,60~254 0 None Planning CPRIPORT
Equipment
0~8 None None Planning CPRIPORT
Equipment
0~9 None None Planning CPRIPORT
614M, 1.25G, 2.5G,
4.9G, 6.1G, 9.8G,
UNKNOWN, NULL None None N/A CPRIPORT
BLOCKED,
UNBLOCKED,
SHUTINGDOWN,
INVALID None None N/A CPRIPORT
INPOSITION,
NOTINPOSITION,
INVALID None None N/A CPRIPORT
Slave, Master,
NULL None None N/A CPRIPORT
SFP_OPTICAL,
ESFP_OPTICAL,
SFP_ELECTRIC,
SCSI_ELECTRIC,
GE, UNKNOWN,
NULL None None N/A CPRIPORT
CPRI_MUX,
NORMAL,
UNKNOWN, NULL None None N/A CPRIPORT
Equipment
DC, AC DC(DC) None Planning ENERGYCON
Equipment
0~7 None None Planning MPT
Equipment
Equipment
UMPT, WMPT, Equipment

LMPT None None Planning MPT
DISABLE, ENABLE ENABLE(Enable) None Engineering Design MPT
Unknown, NULL,
Active, Standby,
Slave None None N/A MPT
Alarm_0, Alarm_1,
Alarm_2, Alarm_3,
Alarm_4, Alarm_5,
Alarm_6, Alarm_7,
Alarm_8, Alarm_9,
Alarm_10,
Alarm_11,
Alarm_12,
Alarm_13,
Alarm_14,
Alarm_15 None None N/A MPT
Enabled, Disabled None None N/A MPT

Avail_0, Avail_1,
Avail_20, Avail_21,
Avail_500,
Avail_501,
Avail_504,
Avail_508,
Avail_509,
Avail_520,
Avail_521,
Avail_524,
Avail_528,
Avail_529,
Avail_800,
Avail_801,
Avail_820,
Avail_821,
Avail_c10,
Avail_c11,
Avail_c12,
Avail_c13,
Avail_c14,
Avail_c30,
Avail_c31,
Avail_c32,
Avail_c33,
Avail_c34,
Avail_d00,
Avail_d01,
Avail_d04,
Avail_d08,
Avail_d09,
Avail_d20,
Avail_d21,
Avail_d24,
Avail_d28,
Avail_d29 None None N/A MPT
0~2047 characters None None N/A MPT

UMPT, UBBP, FAN,
UPEU, PMU, PSU,
BAT, TCU, EMU,
UTRP, USCU,
UEIU, FMU, MRRU,
MRFU, RHUB,
UBRI, MRXU,
MTXU, UCIU, CCU,
SMPT, UCXU,
AAMU, AARU,
UNKNOWN, PRRU,
MPRU, MPMU,
MPRF, AIRU,
GTMU, GBBP,
GRRU, GRFU,
GATM, DRFU,
WMPT, WBBP,
WRFU, NGRU,
LMPT, LBBP,
LRRU, LRFU,
BMPT, BBBI,
BRFU, CRFU,
UBBPX None None N/A MPT
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A MPT
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A MPT
CABINET,
SUBRACK,
BOARD,
SUBBOARD, SFP,
GPS None None N/A MPT
Equipment
0~7 None None Planning PEU
Equipment
Equipment
NULL None None N/A PEU
NULL None None N/A PEU
Alarm_0, Alarm_1,
Alarm_2, Alarm_3,
Alarm_4, Alarm_5,
Alarm_6, Alarm_7,
Alarm_8, Alarm_9,
Alarm_10,
Alarm_11,
Alarm_12,
Alarm_13,
Alarm_14,
Alarm_15 None None N/A PEU
Enabled, Disabled None None N/A PEU
Avail_0, Avail_1,
Avail_20, Avail_21,
Avail_500,
Avail_501,
Avail_504,
Avail_508,
Avail_509,
Avail_520,
Avail_521,
Avail_524,
Avail_528,
Avail_529,
Avail_800,
Avail_801,
Avail_820,
Avail_821,
Avail_c10,
Avail_c11,
Avail_c12,
Avail_c13,
Avail_c14,
Avail_c30,
Avail_c31,
Avail_c32,
Avail_c33,
Avail_c34,
Avail_d00,
Avail_d01,
Avail_d04,
Avail_d08,
Avail_d09,
Avail_d20,
Avail_d21,
Avail_d24,
Avail_d28,
Avail_d29 None None N/A PEU
0~2047 characters None None N/A PEU

UMPT, UBBP, FAN,
UPEU, PMU, PSU,
BAT, TCU, EMU,
UTRP, USCU,
UEIU, FMU, MRRU,
MRFU, RHUB,
UBRI, MRXU,
MTXU, UCIU, CCU,
SMPT, UCXU,
AAMU, AARU,
UNKNOWN, PRRU,
MPRU, MPMU,
MPRF, AIRU,
GTMU, GBBP,
GRRU, GRFU,
GATM, DRFU,
WMPT, WBBP,
WRFU, NGRU,
LMPT, LBBP,
LRRU, LRFU,
BMPT, BBBI,
BRFU, CRFU,
UBBPX None None N/A PEU
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A PEU
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A PEU
CABINET,
SUBRACK,
BOARD,
SUBBOARD, SFP,
GPS None None N/A PEU
DISABLE, ENABLE DISABLE(Disable) DISABLE(Disable) Engineering Design PSUIS
Equipment
0~62 None None Planning SFP
Equipment
0~1,4~5,60~254 None None Planning SFP
Equipment
Equipment
INPOSITION,
NOTINPOSITION,
INVALID None None N/A SFP
SFP, ESFP,
SFP_ELECTRIC,
QSFP, EQSFP,
CPRI_E,
UNKNOWN None None N/A SFP
0~15 characters None None N/A SFP
SINGLEMODE,
MULTIMODE,
UNKNOWN None None N/A SFP
0~65535 None None N/A SFP
0~25500, step:100 None None N/A SFP

0~255(metric
system);0~158(imp
erial system) None None N/A SFP
0~25500,
step:100(metric
system);0~83700,
step:100(imperial
system) None None N/A SFP
0~2550,
step:10(metric
system);0~8370,
step:10(imperial
0~2550,
step:10(metric
system);0~8370,
step:10(imperial
-128~128,
step:0.1(metric
system);-198~262,
step:0.1(imperial
0~6553500,
step:100 None None N/A SFP
0~131070, step:2 None None N/A SFP
0~6553.5, step:0.1 None None N/A SFP

Equipment
0~7 None None Planning TRP
Equipment
Equipment
NULL, UAEC,
UIEC, UUAS,
UQEC, UEOC, Equipment
UIEB, UTRPc None None Planning TRP
Alarm_0, Alarm_1,
Alarm_2, Alarm_3,
Alarm_4, Alarm_5,
Alarm_6, Alarm_7,
Alarm_8, Alarm_9,
Alarm_10,
Alarm_11,
Alarm_12,
Alarm_13,
Alarm_14,
Alarm_15 None None N/A TRP
Enabled, Disabled None None N/A TRP

Avail_0, Avail_1,
Avail_20, Avail_21,
Avail_500,
Avail_501,
Avail_504,
Avail_508,
Avail_509,
Avail_520,
Avail_521,
Avail_524,
Avail_528,
Avail_529,
Avail_800,
Avail_801,
Avail_820,
Avail_821,
Avail_c10,
Avail_c11,
Avail_c12,
Avail_c13,
Avail_c14,
Avail_c30,
Avail_c31,
Avail_c32,
Avail_c33,
Avail_c34,
Avail_d00,
Avail_d01,
Avail_d04,
Avail_d08,
Avail_d09,
Avail_d20,
Avail_d21,
Avail_d24,
Avail_d28,
Avail_d29 None None N/A TRP
0~2047 characters None None N/A TRP

UMPT, UBBP, FAN,
UPEU, PMU, PSU,
BAT, TCU, EMU,
UTRP, USCU,
UEIU, FMU, MRRU,
MRFU, RHUB,
UBRI, MRXU,
MTXU, UCIU, CCU,
SMPT, UCXU,
AAMU, AARU,
UNKNOWN, PRRU,
MPRU, MPMU,
MPRF, AIRU,
GTMU, GBBP,
GRRU, GRFU,
GATM, DRFU,
WMPT, WBBP,
WRFU, NGRU,
LMPT, LBBP,
LRRU, LRFU,
BMPT, BBBI,
BRFU, CRFU,
UBBPX None None N/A TRP
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A TRP
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A TRP
CABINET,
SUBRACK,
BOARD,
SUBBOARD, SFP,
GPS None None N/A TRP
Equipment
0~7 None None Planning UCIU
Equipment
Equipment
Alarm_0, Alarm_1,
Alarm_2, Alarm_3,
Alarm_4, Alarm_5,
Alarm_6, Alarm_7,
Alarm_8, Alarm_9,
Alarm_10,
Alarm_11,
Alarm_12,
Alarm_13,
Alarm_14,
Alarm_15 None None N/A UCIU
Enabled, Disabled None None N/A UCIU

Avail_0, Avail_1,
Avail_20, Avail_21,
Avail_500,
Avail_501,
Avail_504,
Avail_508,
Avail_509,
Avail_520,
Avail_521,
Avail_524,
Avail_528,
Avail_529,
Avail_800,
Avail_801,
Avail_820,
Avail_821,
Avail_c10,
Avail_c11,
Avail_c12,
Avail_c13,
Avail_c14,
Avail_c30,
Avail_c31,
Avail_c32,
Avail_c33,
Avail_c34,
Avail_d00,
Avail_d01,
Avail_d04,
Avail_d08,
Avail_d09,
Avail_d20,
Avail_d21,
Avail_d24,
Avail_d28,
Avail_d29 None None N/A UCIU
0~2047 characters None None N/A UCIU

UMPT, UBBP, FAN,
UPEU, PMU, PSU,
BAT, TCU, EMU,
UTRP, USCU,
UEIU, FMU, MRRU,
MRFU, RHUB,
UBRI, MRXU,
MTXU, UCIU, CCU,
SMPT, UCXU,
AAMU, AARU,
UNKNOWN, PRRU,
MPRU, MPMU,
MPRF, AIRU,
GTMU, GBBP,
GRRU, GRFU,
GATM, DRFU,
WMPT, WBBP,
WRFU, NGRU,
LMPT, LBBP,
LRRU, LRFU,
BMPT, BBBI,
BRFU, CRFU,
UBBPX None None N/A UCIU
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A UCIU
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A UCIU
CABINET,
SUBRACK,
BOARD,
SUBBOARD, SFP,
GPS None None N/A UCIU
Equipment
0~7 None None Planning UEIU
Equipment
Equipment
Alarm_0, Alarm_1,
Alarm_2, Alarm_3,
Alarm_4, Alarm_5,
Alarm_6, Alarm_7,
Alarm_8, Alarm_9,
Alarm_10,
Alarm_11,
Alarm_12,
Alarm_13,
Alarm_14,
Alarm_15 None None N/A UEIU
Enabled, Disabled None None N/A UEIU

Avail_0, Avail_1,
Avail_20, Avail_21,
Avail_500,
Avail_501,
Avail_504,
Avail_508,
Avail_509,
Avail_520,
Avail_521,
Avail_524,
Avail_528,
Avail_529,
Avail_800,
Avail_801,
Avail_820,
Avail_821,
Avail_c10,
Avail_c11,
Avail_c12,
Avail_c13,
Avail_c14,
Avail_c30,
Avail_c31,
Avail_c32,
Avail_c33,
Avail_c34,
Avail_d00,
Avail_d01,
Avail_d04,
Avail_d08,
Avail_d09,
Avail_d20,
Avail_d21,
Avail_d24,
Avail_d28,
Avail_d29 None None N/A UEIU
0~2047 characters None None N/A UEIU

UMPT, UBBP, FAN,
UPEU, PMU, PSU,
BAT, TCU, EMU,
UTRP, USCU,
UEIU, FMU, MRRU,
MRFU, RHUB,
UBRI, MRXU,
MTXU, UCIU, CCU,
SMPT, UCXU,
AAMU, AARU,
UNKNOWN, PRRU,
MPRU, MPMU,
MPRF, AIRU,
GTMU, GBBP,
GRRU, GRFU,
GATM, DRFU,
WMPT, WBBP,
WRFU, NGRU,
LMPT, LBBP,
LRRU, LRFU,
BMPT, BBBI,
BRFU, CRFU,
UBBPX None None N/A UEIU
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A UEIU
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A UEIU
CABINET,
SUBRACK,
BOARD,
SUBBOARD, SFP,
GPS None None N/A UEIU
Equipment
0~7 None None Planning USCU
Equipment
Equipment
Alarm_0, Alarm_1,
Alarm_2, Alarm_3,
Alarm_4, Alarm_5,
Alarm_6, Alarm_7,
Alarm_8, Alarm_9,
Alarm_10,
Alarm_11,
Alarm_12,
Alarm_13,
Alarm_14,
Alarm_15 None None N/A USCU
Enabled, Disabled None None N/A USCU

Avail_0, Avail_1,
Avail_20, Avail_21,
Avail_500,
Avail_501,
Avail_504,
Avail_508,
Avail_509,
Avail_520,
Avail_521,
Avail_524,
Avail_528,
Avail_529,
Avail_800,
Avail_801,
Avail_820,
Avail_821,
Avail_c10,
Avail_c11,
Avail_c12,
Avail_c13,
Avail_c14,
Avail_c30,
Avail_c31,
Avail_c32,
Avail_c33,
Avail_c34,
Avail_d00,
Avail_d01,
Avail_d04,
Avail_d08,
Avail_d09,
Avail_d20,
Avail_d21,
Avail_d24,
Avail_d28,
Avail_d29 None None N/A USCU
0~2047 characters None None N/A USCU

UMPT, UBBP, FAN,
UPEU, PMU, PSU,
BAT, TCU, EMU,
UTRP, USCU,
UEIU, FMU, MRRU,
MRFU, RHUB,
UBRI, MRXU,
MTXU, UCIU, CCU,
SMPT, UCXU,
AAMU, AARU,
UNKNOWN, PRRU,
MPRU, MPMU,
MPRF, AIRU,
GTMU, GBBP,
GRRU, GRFU,
GATM, DRFU,
WMPT, WBBP,
WRFU, NGRU,
LMPT, LBBP,
LRRU, LRFU,
BMPT, BBBI,
BRFU, CRFU,
UBBPX None None N/A USCU
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A USCU
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A USCU
CABINET,
SUBRACK,
BOARD,
SUBBOARD, SFP,
GPS None None N/A USCU
ON, OFF OFF(OFF) None Engineering Design EQUIPMENT

NORMAL,
INSTALL, EXPAND,
UPGRADE,
TESTING,
ExpandStatus1,
ExpandStatus2,
ExpandStatus3,
ExpandStatus4,
ExpandStatus5,
ExpandStatus6,
ExpandStatus7,
ExpandStatus8,
ExpandStatus9, NORMAL(NORMAL
ExpandStatus10 ) None Engineering Design EQUIPMENT
2000-01-
01T00:00:00+00:00
~2037-12- 2000-01-
31T23:59:59+00:00 01T00:00:00+00:00 None Engineering Design EQUIPMENT
2000-01-
01T00:00:00+00:00
~2037-12- 2037-12-
31T23:59:59+00:00 31T23:59:59+00:00 None Engineering Design EQUIPMENT
0~255 characters NULL(empty string) None Engineering Design EQUIPMENT

NORMAL,
INSTALL, EXPAND,
UPGRADE,
TESTING,
ExpandStatus1,
ExpandStatus2,
ExpandStatus3,
ExpandStatus4,
ExpandStatus5,
ExpandStatus6,
ExpandStatus7,
ExpandStatus8,
ExpandStatus9,
ExpandStatus10 None None N/A EQUIPMENT
Equipment
DISABLE, ENABLE DISABLE(Disable) None Planning EQUIPMENT
Equipment
39.0~48.0, step:0.1 450 None Planning EQUIPMENT
Equipment
39.0~60.0, step:0.1 455 None Planning EQUIPMENT
Equipment
0~254 0 None Planning EQUIPMENT
DBS3900,
DBS3900-1U,
BTS3900,
BTS3900A,
BTS3900L,
BTS3900AL,
BTS3900-1U,
BBP530,
BTS3803E,
DBS3900A, DBS3900(DBS3900 Equipment
USU3900 ) None Planning EQUIPMENT
Equipment
CPRI, TDL_IR CPRI(CPRI) None Planning EQUIPMENT
ON, OFF ON(ON) None Engineering Design EQUIPMENT
Equipment
0~62 None None Planning CABINET
APM30, TMC, BBC,

APM100, APM200,
PS4890, OMB,
RFC, BTS3900,
BTS3900L,
BTS3900AL,
VIRTUAL,
BTS3900D,
BTS3012_SRAN,
BTS3012AE_SRAN
, BTS3012II_SRAN,
TP48300A, VIRTUAL(Virtual Equipment
TP48600A, ILC29 Cabinet) None Planning CABINET
0~79 characters NULL(empty string) None Engineering Design CABINET
0~31 characters None None N/A CABINET
Equipment
0~62 None None Planning SUBRACK
Equipment
0~254 None None Planning SUBRACK
BBU3900, RFU,
PMU, TCU, FMU,
RRU, RHUB,
PRRU, EMU, GRU,
BBU3900-1U,
GATM, PICO, CCU, Equipment
AAS, UNKNOW None None Planning SUBRACK
0~79 characters NULL(empty string) None Engineering Design SUBRACK
AC220V, DC-48V,
DC+28V, DC+24V,
DC-48V-2, AC110V,
RDC-48V, NDC-
48V None None N/A SUBRACK
Alarm_0, Alarm_1,
Alarm_2, Alarm_3,
Alarm_4, Alarm_5,
Alarm_6, Alarm_7,
Alarm_8, Alarm_9,
Alarm_10,
Alarm_11,
Alarm_12,
Alarm_13,
Alarm_14,
Alarm_15 None None N/A RU
Enabled, Disabled None None N/A RU

Avail_0, Avail_1,
Avail_20, Avail_21,
Avail_500,
Avail_501,
Avail_504,
Avail_508,
Avail_509,
Avail_520,
Avail_521,
Avail_524,
Avail_528,
Avail_529,
Avail_800,
Avail_801,
Avail_820,
Avail_821,
Avail_c10,
Avail_c11,
Avail_c12,
Avail_c13,
Avail_c14,
Avail_c30,
Avail_c31,
Avail_c32,
Avail_c33,
Avail_c34,
Avail_d00,
Avail_d01,
Avail_d04,
Avail_d08,
Avail_d09,
Avail_d20,
Avail_d21,
Avail_d24,
Avail_d28,
Avail_d29 None None N/A RU
0~2047 characters None None N/A RU

UMPT, UBBP, FAN,
UPEU, PMU, PSU,
BAT, TCU, EMU,
UTRP, USCU,
UEIU, FMU, MRRU,
MRFU, RHUB,
UBRI, MRXU,
MTXU, UCIU, CCU,
SMPT, UCXU,
AAMU, AARU,
UNKNOWN, PRRU,
MPRU, MPMU,
MPRF, AIRU,
GTMU, GBBP,
GRRU, GRFU,
GATM, DRFU,
WMPT, WBBP,
WRFU, NGRU,
LMPT, LBBP,
LRRU, LRFU,
BMPT, BBBI,
BRFU, CRFU,
UBBPX None None N/A RU
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A RU
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A RU
CABINET,
SUBRACK,
BOARD,
SUBBOARD, SFP,
GPS None None N/A RU
0~62 0 0 Engineering Design EMU
0 0 0 Engineering Design EMU

When the EMU is
connected to the
MON1 port on the
UPEU/UEIU, set
this parameter to 1.
When the EMU is
connected to the
MON0 port on the
UPEU/UEIU, set
When the EMU is
connected to the
RRU, set this
parameter to
0.When the EMU is
connected to the
CCU, set this
0~7 None parameter to 0~7. Engineering Design EMU

-20~80(metric
system);- 0(metric 0(metric
4~176(imperial system);32(imperial system);32(imperial
system) system) system) Engineering Design EMU
-20~80(metric
4~176(imperial system);122(imperi system);122(imperi
system) al system) al system) Engineering Design EMU
It is recommended
that -48 Voltage
Disabled be set to
OFF, Reserved
-48 Voltage Sensor 0 be set to
Disabled:OFF, ON, Reserved
Reserved Sensor Sensor 1 be set to
0:ON, Reserved ON, Reserved
Sensor 1:ON, Sensor 2 be set to
Reserved Sensor ON, Temperature
48V_DISABLE, 2:ON, Temperature Sensor Disabled be
RES0, RES1, Sensor set to OFF, and
RES2, Disabled:OFF, Humidity Sensor
TS_DISABLE, Humidity Sensor Disabled be set to
HS_DISABLE Disabled:OFF OFF. Engineering Design EMU
It is recommended
that Water-
Immersed Sensor
Water -Immersed Disabled be set to
Sensor OFF, Smog Sensor
Disabled:OFF, Disabled be set to
Smog Sensor OFF, Infrared
Disabled:OFF, Sensor Disabled be
WS_DISABLE, Infrared Sensor set to ON, and
SS_DISABLE, Disabled:ON, Gating Sensor
IS_DISABLE, Gating Sensor Disabled be set to
GS_DISABLE Disabled:OFF OFF. Engineering Design EMU
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A EMU
0~100 None None N/A EMU
0.0~100.0 None None N/A EMU
-999.99~9999.99 None None N/A EMU
-999.99~9999.99 None None N/A EMU
-999.99~9999.99 None None N/A EMU
-999.99~9999.99 None None N/A EMU

Alarm_0, Alarm_1,
Alarm_2, Alarm_3,
Alarm_4, Alarm_5,
Alarm_6, Alarm_7,
Alarm_8, Alarm_9,
Alarm_10,
Alarm_11,
Alarm_12,
Alarm_13,
Alarm_14,
Alarm_15 None None N/A EMU
Enabled, Disabled None None N/A EMU

Avail_0, Avail_1,
Avail_20, Avail_21,
Avail_500,
Avail_501,
Avail_504,
Avail_508,
Avail_509,
Avail_520,
Avail_521,
Avail_524,
Avail_528,
Avail_529,
Avail_800,
Avail_801,
Avail_820,
Avail_821,
Avail_c10,
Avail_c11,
Avail_c12,
Avail_c13,
Avail_c14,
Avail_c30,
Avail_c31,
Avail_c32,
Avail_c33,
Avail_c34,
Avail_d00,
Avail_d01,
Avail_d04,
Avail_d08,
Avail_d09,
Avail_d20,
Avail_d21,
Avail_d24,
Avail_d28,
Avail_d29 None None N/A EMU
0~2047 characters None None N/A EMU

UMPT, UBBP, FAN,
UPEU, PMU, PSU,
BAT, TCU, EMU,
UTRP, USCU,
UEIU, FMU, MRRU,
MRFU, RHUB,
UBRI, MRXU,
MTXU, UCIU, CCU,
SMPT, UCXU,
AAMU, AARU,
UNKNOWN, PRRU,
MPRU, MPMU,
MPRF, AIRU,
GTMU, GBBP,
GRRU, GRFU,
GATM, DRFU,
WMPT, WBBP,
WRFU, NGRU,
LMPT, LBBP,
LRRU, LRFU,
BMPT, BBBI,
BRFU, CRFU,
UBBPX None None N/A EMU
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
CABINET,
SUBRACK,
BOARD,
SUBBOARD, SFP,
GPS None None N/A EMU
0~62 0 0 Engineering Design FMU
0 0 0 Engineering Design FMU

When the FMU is
connected to the
MON1 port on the
UPEU/UEIU, set
When the FMU is
connected to the
MON0 port on the
UPEU/UEIU, set
When the FMU is
connected to the
RRU, set this
parameter to 0.
When the FMU is
connected to the
CCU, set this
parameter to a
value within the
0~7 None range of 0 to 7. Engineering Design FMU
The FMUs of a
maximum of two
levels can be
connected to a bus.
The communication
address of the FMU
that is directly
connected to the
BBU is set to 14.
The communication
address of the
lower-level FMU is
1~30 14 set to 15. Engineering Design FMU
Water-Immersed Water-Immersed
Sensor Sensor
Disabled:ON, Smog Disabled:ON, Smog
WS_DISABLE, Sensor Sensor
SS_DISABLE Disabled:ON Disabled:ON Engineering Design FMU
0~100 None None N/A FMU

-127~127(metric
system);-
197~261(imperial
system) None None N/A FMU
-127~127(metric
system);-
197~261(imperial
0~4294967295 None None N/A FMU
DISABLE, ENABLE ENABLE(Enable) ENABLE(Enable) Engineering Design FMU

Alarm_0, Alarm_1,
Alarm_2, Alarm_3,
Alarm_4, Alarm_5,
Alarm_6, Alarm_7,
Alarm_8, Alarm_9,
Alarm_10,
Alarm_11,
Alarm_12,
Alarm_13,
Alarm_14,
Alarm_15 None None N/A FMU
Enabled, Disabled None None N/A FMU
Avail_0, Avail_1,
Avail_20, Avail_21,
Avail_500,
Avail_501,
Avail_504,
Avail_508,
Avail_509,
Avail_520,
Avail_521,
Avail_524,
Avail_528,
Avail_529,
Avail_800,
Avail_801,
Avail_820,
Avail_821,
Avail_c10,
Avail_c11,
Avail_c12,
Avail_c13,
Avail_c14,
Avail_c30,
Avail_c31,
Avail_c32,
Avail_c33,
Avail_c34,
Avail_d00,
Avail_d01,
Avail_d04,
Avail_d08,
Avail_d09,
Avail_d20,
Avail_d21,
Avail_d24,
Avail_d28,
Avail_d29 None None N/A FMU
0~2047 characters None None N/A FMU

UMPT, UBBP, FAN,
UPEU, PMU, PSU,
BAT, TCU, EMU,
UTRP, USCU,
UEIU, FMU, MRRU,
MRFU, RHUB,
UBRI, MRXU,
MTXU, UCIU, CCU,
SMPT, UCXU,
AAMU, AARU,
UNKNOWN, PRRU,
MPRU, MPMU,
MPRF, AIRU,
GTMU, GBBP,
GRRU, GRFU,
GATM, DRFU,
WMPT, WBBP,
WRFU, NGRU,
LMPT, LBBP,
LRRU, LRFU,
BMPT, BBBI,
BRFU, CRFU,
UBBPX None None N/A FMU
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
CABINET,
SUBRACK,
BOARD,
SUBBOARD, SFP,
GPS None None N/A FMU
0~62 0 0 Engineering Design TCU
8,14 8 8 Engineering Design TCU

When the TCU is

connected to the
MON1 port on the
UPEU/UEIU, set
When the TCU is
connected to the
MON0 port on the
UPEU/UEIU, set
When the TCU is
connected to the
RRU, set this
parameter to 0.
When the TCU is
connected to the
CCU, set this
parameter to a
value within the
0~7 None range of 0 to 7. Engineering Design TCU
address of the
level-1 TCU is set
to 7 and that of the
level-2 is set to 6;
when the TCU is
used for heating,
the communication
address of the
level-1 TCU is set
to 28 and that of the
level-2 is set to
29.For the TCU
configured in a
BBC, if the
communication
address of the PMU
connected to the
BBC is 3, the
communication
address of the
level-1 TCU
connected to the
BBU is set to 23
and that of the
level-2 TCU is set
to 24. If the
communication
address of the PMU
connected to the
BBC is 4, the
communication
address of the
level-1 TCU
connected to the
BBU is set to 25
and that of level-2
1~30 7 TCU is set to 26. Engineering Design TCU
When the cabinet

type is OMB, the
recommended
value is -33 degree
Celsius (-27.4
degree Fahrenheit).
The cabinet type of
-40~10(metric other types should
system);- be set -20 degree
40~50(imperial -20(metric system);- Celsius (-4 degree
system) 4(imperial system) Fahrenheit). Engineering Design TCU
For the TCU in the
BBC, the
recommended
value is 50 degree
Celsius (122
degree Fahrenheit).
For the TCU in
another cabinet, the
recommended
20~80(metric 68(metric value is 68 degree
system);68~176(im system);154(imperi Celsius (154
perial system) al system) degree Fahrenheit). Engineering Design TCU
Water-Immersed Water-Immersed
Sensor Sensor
Disabled:ON, Smog Disabled:ON, Smog
WS_DISABLE, Sensor Sensor
SS_DISABLE Disabled:ON Disabled:ON Engineering Design TCU
0~3 characters None None N/A TCU
-127~127(metric
system);-
197~261(imperial
system) None None N/A TCU
-127~127(metric
system);-
197~261(imperial
-127~127(metric
system);-
197~261(imperial
0~4294967295 None None N/A TCU


dantherm, bw,
huawei, air-sys,
senguang,
viasystems, rittal,
emerson, APW,
hytems, hontech,
agisson, pantair,
Panasonic, Gore,
Flex, Vapel, AVC,
JIAYI, Delta, EBM,
Protechnic, Sanyo None None N/A TCU
Alarm_0, Alarm_1,
Alarm_2, Alarm_3,
Alarm_4, Alarm_5,
Alarm_6, Alarm_7,
Alarm_8, Alarm_9,
Alarm_10,
Alarm_11,
Alarm_12,
Alarm_13,
Alarm_14,
Alarm_15 None None N/A TCU
Enabled, Disabled None None N/A TCU
Avail_0, Avail_1,
Avail_20, Avail_21,
Avail_500,
Avail_501,
Avail_504,
Avail_508,
Avail_509,
Avail_520,
Avail_521,
Avail_524,
Avail_528,
Avail_529,
Avail_800,
Avail_801,
Avail_820,
Avail_821,
Avail_c10,
Avail_c11,
Avail_c12,
Avail_c13,
Avail_c14,
Avail_c30,
Avail_c31,
Avail_c32,
Avail_c33,
Avail_c34,
Avail_d00,
Avail_d01,
Avail_d04,
Avail_d08,
Avail_d09,
Avail_d20,
Avail_d21,
Avail_d24,
Avail_d28,
Avail_d29 None None N/A TCU

UMPT, UBBP, FAN,
UPEU, PMU, PSU,
BAT, TCU, EMU,
UTRP, USCU,
UEIU, FMU, MRRU,
MRFU, RHUB,
UBRI, MRXU,
MTXU, UCIU, CCU,
SMPT, UCXU,
AAMU, AARU,
UNKNOWN, PRRU,
MPRU, MPMU,
MPRF, AIRU,
GTMU, GBBP,
GRRU, GRFU,
GATM, DRFU,
WMPT, WBBP,
WRFU, NGRU,
LMPT, LBBP,
LRRU, LRFU,
BMPT, BBBI,
BRFU, CRFU,
UBBPX None None N/A TCU
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
CABINET,
SUBRACK,
BOARD,
SUBBOARD, SFP,
GPS None None N/A TCU
0~62 0 0 Engineering Design HTCDPA
8,14 8 8 Engineering Design HTCDPA
0~3 0 0 Engineering Design HTCDPA
-99~70(metric
system) system) system) Engineering Design HTCDPA
-99~70(metric
system) al system) al system) Engineering Design HTCDPA
-99~70(metric
system) al system) al system) Engineering Design HTCDPA
0~30(metric 2(metric 2(metric

system);32~86(imp system);36(imperial system);36(imperial
erial system) system) system) Engineering Design HTCDPA


0~62 0 0 Engineering Design PMU
7 7 7 Engineering Design PMU
0 0 0 Engineering Design PMU

When the PMU is
connected to the
MON1 port on the
UPEU/UEIU, set
When the PMU is
connected to the
MON0 port on the
UPEU/UEIU, set
When the PMU is
connected to the
RRU, set this
parameter to 0.
When the PMU is
connected to the
CCU, set this
parameter to a
value within the
0~7 None range of 0 to 7. Engineering Design PMU

APM100, APM200,
APM30, EPS4890,
EPS4815,
SC48200,
EPS48200,
TP48300A, ETP APM30(APM 30) APM30(APM 30) Engineering Design PMU

The recommended
value of this
parameter for the
SC48200 PMU is
470. The
recommended
value of this
parameter for other
types of PMU is
35.0~55.6, step:0.1 450 450. Engineering Design PMU
The recommended
value of this
parameter for the
SC48200 PMU is
585. The
recommended
value of this
parameter for other
types of PMU is
The recommended
value of this
parameter for the
SC48200 PMU is
ENABLE(Enable).
The recommended
value of this
parameter for other
types of PMU is
DISABLE, ENABLE DISABLE(Disable) DISABLE(Disable). Engineering Design PMU
The recommended
value of this
parameter for the
SC48200 PMU is
465. The
recommended
value of this
parameter for other
types of PMU is
-20~20(metric
system) system) system) Engineering Design PMU

system);95~176(im system);122(imperi system);122(imperi
perial system) al system) al system) Engineering Design PMU
It is recommended
that Battery
Temperature
Sensor 1 Disabled
be set to OFF for
PMUs in the
APM30, PS4890,
and SC48200 and
Battery ON for other PMUs,
Temperature Cabinet Humidity
Sensor 1 Sensor Disabled be
Disabled:OFF, set to ON, Cabinet
Cabinet Humidity Temperature
Sensor Sensor 1 Disabled
Disabled:ON, be set to OFF for
Cabinet PMUs in the
Temperature APM100 and
Sensor 1 APM200 and ON
Disabled:ON, for other PMUs,
BT1_DISABLE, Battery and Battery
AH_DISABLE, Temperature Temperature
AT1_DISABLE, Sensor 2 Sensor 2 Disabled
BT2_DISABLE Disabled:ON be set to ON. Engineering Design PMU
It is recommended
that Water-
Immersed Sensor
Disabled be set to
ON, Smog Sensor
Disabled be set to
Water-Immersed ON, and Gating
Sensor Sensor Disabled be
Disabled:ON, Smog set to OFF for
Sensor PMUs in the
WS_DISABLE, Disabled:ON, APM30, APM100,
SS_DISABLE, Gating Sensor and APM200 and
GS_DISABLE Disabled:OFF ON for other PMUs. Engineering Design PMU
-
2147483648~2147
483647 None None N/A PMU
-100.0~100.0 None None N/A PMU
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A PMU
0~100 None None N/A PMU
PowerOn,
LowVoltagePowerO
ff,
MasterControlPowe
rOff,
HighTemperaturePo
werOff,
LowTemperaturePo
werOff None None N/A PMU
BoostCharging,
FloatCharging,
ForceBoostChargin
g, Discharging,
Sleeping None None N/A PMU
CurrentLimiting,
NoCurrentLimiting,
NULL None None N/A PMU
PowerOn,
LowVoltagePowerO
ff,
MasterControlPowe
rOff,
ManualPowerOff,
HighTemperaturePo
werOff None None N/A PMU
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
CHARGE,
DISCHARGE, REC,
END None None N/A PMU
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
0~18 characters None None N/A PMU
Huawei, Emerson,
Holdluck-ZYT,
Power-One, Kehua,
DeltaElectronics,
EltekEnergy,
Switchtec,
TycoElectronics,
ARTESYN,
CHROMA,
LuckyValley,
ACBEL, Zippy,
GuoyaoElectronics,
DPC, GoldPower,
SungrowPowerSup
ply, Ecom None None N/A PMU
UNSUPPORTED,
SUPPORTED None None N/A PMU
DISABLE, ENABLE None None N/A PMU
UNSUPPORTED,
SUPPORTED None None N/A PMU
DISABLE, ENABLE None None N/A PMU

Alarm_0, Alarm_1,
Alarm_2, Alarm_3,
Alarm_4, Alarm_5,
Alarm_6, Alarm_7,
Alarm_8, Alarm_9,
Alarm_10,
Alarm_11,
Alarm_12,
Alarm_13,
Alarm_14,
Alarm_15 None None N/A PMU
Enabled, Disabled None None N/A PMU

Avail_0, Avail_1,
Avail_20, Avail_21,
Avail_500,
Avail_501,
Avail_504,
Avail_508,
Avail_509,
Avail_520,
Avail_521,
Avail_524,
Avail_528,
Avail_529,
Avail_800,
Avail_801,
Avail_820,
Avail_821,
Avail_c10,
Avail_c11,
Avail_c12,
Avail_c13,
Avail_c14,
Avail_c30,
Avail_c31,
Avail_c32,
Avail_c33,
Avail_c34,
Avail_d00,
Avail_d01,
Avail_d04,
Avail_d08,
Avail_d09,
Avail_d20,
Avail_d21,
Avail_d24,
Avail_d28,
Avail_d29 None None N/A PMU

UMPT, UBBP, FAN,
UPEU, PMU, PSU,
BAT, TCU, EMU,
UTRP, USCU,
UEIU, FMU, MRRU,
MRFU, RHUB,
UBRI, MRXU,
MTXU, UCIU, CCU,
SMPT, UCXU,
AAMU, AARU,
UNKNOWN, PRRU,
MPRU, MPMU,
MPRF, AIRU,
GTMU, GBBP,
GRRU, GRFU,
GATM, DRFU,
WMPT, WBBP,
WRFU, NGRU,
LMPT, LBBP,
LRRU, LRFU,
BMPT, BBBI,
BRFU, CRFU,
UBBPX None None N/A PMU
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
CABINET,
SUBRACK,
BOARD,
SUBBOARD, SFP,
GPS None None N/A PMU
0~62 0 0 Engineering Design DIESELGEN
7 7 7 Engineering Design DIESELGEN
0 0 0 Engineering Design DIESELGEN
DISABLE, ENABLE DISABLE(Disable) DISABLE(Disable) Engineering Design DIESELGEN

0.1~100.0, step:0.1 125 125 Engineering Design DIESELGEN
1~7
characters(metric
system);1~7(imperi
al system) None None N/A DIESELGEN
-150.0~150.0 None None N/A DIESELGEN
0~4294967295 None None N/A DIESELGEN
0~62 0 0 Engineering Design BATTERY
7 7 7 Engineering Design BATTERY
0 0 0 Engineering Design BATTERY

The battery
installation type of
the SC48200 PMU
is OUTER. The
battery installation
type of other types
of PMU should be
set based on the
INNER, OUTER INNER(Inner) actual situation. Engineering Design BATTERY

43.3~57.6, step:0.1 565 565 Engineering Design BATTERY
5~5000 36 None Engineering Design BATTERY
0.05~0.25,
step:0.01 15 15 Engineering Design BATTERY
43.2~57.5, step:0.1 535 535 Engineering Design BATTERY
DISABLE, ENABLE ENABLE(Enable) ENABLE(Enable) Engineering Design BATTERY

The recommended
value of this
parameter for the
SC48200 PMU is
60 degree Celsius
(140 degree
Fahrenheit). The
recommended
value of this
parameter for other
types of PMU is 53
40~70(metric 53(metric degree Celsius
system);104~158(i system);127(imperi (127 degree
mperial system) al system) Fahrenheit). Engineering Design BATTERY
DISABLE, ENABLE ENABLE(Enable) ENABLE(Enable) Engineering Design BATTERY
The recommended
value of this
parameter for the
SC48200 PMU is
460. The
recommended
value of this
parameter for other
types of PMU is
35.0~55.6, step:0.1 430 430. Engineering Design BATTERY
erial system) system) system) Engineering Design BATTERY
-20~20(metric
system);-
4~68(imperial -19(metric system);- -19(metric system);-
system) 2(imperial system) 2(imperial system) Engineering Design BATTERY
system);95~176(im system);122(imperi system);122(imperi
perial system) al system) al system) Engineering Design BATTERY
VRLA_BAT(VRLA VRLA_BAT(VRLA
VRLA_BAT, LI_BAT Battery) Battery) Engineering Design BATTERY
0~4294967295 None None N/A BATTERY




2000-01-01~2099-
12-31 None None N/A BATTERY
5~5000 36 None Engineering Design BATTERY
0~62 0 0 Engineering Design BATCTPA

7 7 7 Engineering Design BATCTPA
0 0 0 Engineering Design BATCTPA
0.01~50.00,
step:0.01 1200 1200 Engineering Design BATCTPA
0.01~50.00,
0.01~50.00,
0.01~50.00,
0.01~50.00,
0.01~50.00,
0.01~50.00,
0.01~50.00,
0.01~50.00,
0.01~50.00,
1.70~2.20,

40.0~54.0, step:0.1 450 450 Engineering Design BATCTPA
NOAUTOTEST,
PERIOD,
POWERCUT,
PERIODPOWERC POWERCUT(Powe POWERCUT(Powe
UT r Off Auto Test) r Off Auto Test) Engineering Design BATCTPA
0~100 None None N/A BATCTPA
1~7 characters None None N/A BATCTPA
-100.00~100.00 None None N/A BATCTPA
-150.0~150.0 None None N/A BATCTPA
0~4294967295 None None N/A BATCTPA

-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A BATCTPA
0~62 0 0 Engineering Design PSU
7 7 7 Engineering Design PSU
1~7 1 None Engineering Design PSU

NORMAL,
COMMUNICATEFAI
LED, SHUTDOWN,
FAULT, PROTECT,
UNCONFIGURED,
ILLEGAL None None N/A PSU
0~18 characters None None N/A PSU
Huawei, Emerson,
Holdluck-ZYT,
Power-One, Kehua,
DeltaElectronics,
EltekEnergy,
Switchtec,
TycoElectronics,
ARTESYN,
CHROMA,
LuckyValley,
ACBEL, Zippy,
GuoyaoElectronics,
DPC, GoldPower,
SungrowPowerSup
ply, Ecom None None N/A PSU
0~4294967295 None None N/A PSU

0~4294967295 None None N/A PSU
Alarm_0, Alarm_1,
Alarm_2, Alarm_3,
Alarm_4, Alarm_5,
Alarm_6, Alarm_7,
Alarm_8, Alarm_9,
Alarm_10,
Alarm_11,
Alarm_12,
Alarm_13,
Alarm_14,
Alarm_15 None None N/A PSU
Enabled, Disabled None None N/A PSU

Avail_0, Avail_1,
Avail_20, Avail_21,
Avail_500,
Avail_501,
Avail_504,
Avail_508,
Avail_509,
Avail_520,
Avail_521,
Avail_524,
Avail_528,
Avail_529,
Avail_800,
Avail_801,
Avail_820,
Avail_821,
Avail_c10,
Avail_c11,
Avail_c12,
Avail_c13,
Avail_c14,
Avail_c30,
Avail_c31,
Avail_c32,
Avail_c33,
Avail_c34,
Avail_d00,
Avail_d01,
Avail_d04,
Avail_d08,
Avail_d09,
Avail_d20,
Avail_d21,
Avail_d24,
Avail_d28,
Avail_d29 None None N/A PSU

UMPT, UBBP, FAN,
UPEU, PMU, PSU,
BAT, TCU, EMU,
UTRP, USCU,
UEIU, FMU, MRRU,
MRFU, RHUB,
UBRI, MRXU,
MTXU, UCIU, CCU,
SMPT, UCXU,
AAMU, AARU,
UNKNOWN, PRRU,
MPRU, MPMU,
MPRF, AIRU,
GTMU, GBBP,
GRRU, GRFU,
GATM, DRFU,
WMPT, WBBP,
WRFU, NGRU,
LMPT, LBBP,
LRRU, LRFU,
BMPT, BBBI,
BRFU, CRFU,
UBBPX None None N/A PSU
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A PSU
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A PSU
CABINET,
SUBRACK,
BOARD,
SUBBOARD, SFP,
GPS None None N/A PSU
0~62 0 0 Engineering Design OUTPORT
40~59 40 40 Engineering Design OUTPORT
0 0 0 Engineering Design OUTPORT
0~5 None None Engineering Design OUTPORT
0~50 characters NULL(empty string) None Engineering Design OUTPORT
OFF, ON OFF(Off) OFF(Off) Engineering Design OUTPORT
0~62 None None Engineering Design ALMPORT
0~1,7~8,11~12,14~
15,40~254 None None Engineering Design ALMPORT
0~3,18~19 None None Engineering Design ALMPORT
0~35 None None Engineering Design ALMPORT

OFF, ON OFF(Off) OFF(Off) Engineering Design ALMPORT
65033~65233 65033 65033 Engineering Design ALMPORT
BOOL, VALUE BOOL(Digital Port) BOOL(Digital Port) Engineering Design ALMPORT

HIGH, LOW LOW(Low Voltage) LOW(Low Voltage) Engineering Design ALMPORT
-999.99~9999.99,
step:0.01 9900 9900 Engineering Design ALMPORT
-999.99~9999.99,
VOLTAGE, VOLTAGE(Voltage VOLTAGE(Voltage

CURRENT Type) Type) Engineering Design ALMPORT
-999.99~9999.99,
-999.99~9999.99,
0~9999.99,
0~9999.99,
Default/Recommen
ALL, SSL ALL(All Type) None ded Value SSL
Default/Recommen
NONE, PEER NONE(Verify None) None ded Value SSL
COMPATIBLE_MO
DE, COMPATIBLE_MO
ENHANCED_MOD DE(Compatible Default/Recommen
E Mode) None ded Value SSL
COMPATIBLE,
HTTPS_ONLY,
LOGIN_HTTPS_O HTTPS_ONLY(Http Default/Recommen
NLY s_only) None ded Value WEBLMT
Radio Planning
1~255 None None (Internal planning) APPLICATION
GBTS, NodeB, Radio Planning

eNodeB None None (Internal planning) APPLICATION
Radio Planning
1~31 characters None None (Internal planning) APPLICATION
AVAILABLE,
UNAVAILABLE None None N/A APPLICATION
0~63 characters None None N/A APPLICATION

Equipment
0 None None Planning AAMU
Equipment
60~254 None None Planning AAMU
Equipment
0 None None Planning AAMU
Equipment
TRUNK None None Planning AAMU
Equipment
Equipment
Equipment
0 None None Planning AARU
Equipment
60~254 None None Planning AARU
Equipment
0~31 characters NULL(empty string) None Engineering Design AARU
BLOCKED, UNBLOCKED(Unbl Equipment

UNBLOCKED ocked) None Planning AARU
5000, 4800, 4600,

4400, 4200, 3800, Radio Planning
4000 5000(5000) None (Internal planning) AARU
-25000~25000, Radio Planning

step:100 0 None (Internal planning) AARU
Equipment
Equipment
ON, OFF ON(ON) None Engineering Design AARU
LO, GO, GL, UO, Equipment

UL, GU None None Planning AARU
Equipment
-90~90,3276.7,
step:0.1 None None N/A AARU
-90~90,3276.7,
-90~90,6553.5,
-90~90,6553.5,
-10~30,3276.7,
-10~30,3276.7,
0~6553.5, step:0.1 None None N/A AARU
Equipment
0 None None Planning AAS
Equipment
60~254 None None Planning AAS
Equipment
0~31 characters NULL(empty string) None Planning AAS
CONNECTHEAD,
CONNECTTAIL,
CONNECTBOTH,
SEPERATEBYBRE
AK, LINKDOWN None None N/A AAS
0 0 0 Engineering Design RHUB
60~254 60 None Engineering Design RHUB
0 0 0 Engineering Design RHUB
0~249 0 0 Engineering Design RHUB
0~7 0 None Engineering Design RHUB
0~31 characters NULL(empty string) None Engineering Design RHUB

Alarm_0, Alarm_1,
Alarm_2, Alarm_3,
Alarm_4, Alarm_5,
Alarm_6, Alarm_7,
Alarm_8, Alarm_9,
Alarm_10,
Alarm_11,
Alarm_12,
Alarm_13,
Alarm_14,
Alarm_15 None None N/A RHUB
Enabled, Disabled None None N/A RHUB

Avail_0, Avail_1,
Avail_20, Avail_21,
Avail_500,
Avail_501,
Avail_504,
Avail_508,
Avail_509,
Avail_520,
Avail_521,
Avail_524,
Avail_528,
Avail_529,
Avail_800,
Avail_801,
Avail_820,
Avail_821,
Avail_c10,
Avail_c11,
Avail_c12,
Avail_c13,
Avail_c14,
Avail_c30,
Avail_c31,
Avail_c32,
Avail_c33,
Avail_c34,
Avail_d00,
Avail_d01,
Avail_d04,
Avail_d08,
Avail_d09,
Avail_d20,
Avail_d21,
Avail_d24,
Avail_d28,
Avail_d29 None None N/A RHUB
0~2047 characters None None N/A RHUB

UMPT, UBBP, FAN,
UPEU, PMU, PSU,
BAT, TCU, EMU,
UTRP, USCU,
UEIU, FMU, MRRU,
MRFU, RHUB,
UBRI, MRXU,
MTXU, UCIU, CCU,
SMPT, UCXU,
AAMU, AARU,
UNKNOWN, PRRU,
MPRU, MPMU,
MPRF, AIRU,
GTMU, GBBP,
GRRU, GRFU,
GATM, DRFU,
WMPT, WBBP,
WRFU, NGRU,
LMPT, LBBP,
LRRU, LRFU,
BMPT, BBBI,
BRFU, CRFU,
UBBPX None None N/A RHUB
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A RHUB
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A RHUB
CABINET,
SUBRACK,
BOARD,
SUBBOARD, SFP,
GPS None None N/A RHUB

UNBLOCKED ocked) ocked) Engineering Design RE
ON, OFF OFF(OFF) OFF(OFF) Engineering Design RE

1.4~10, step:0.1 30 None Engineering Design RE
1.4~3, step:0.1 20 None Engineering Design RE
Equipment
0~20 None None Planning RE
Equipment
Equipment
TRUNK, BRANCH TRUNK(TRUNK) TRUNK(TRUNK) Planning RE
TDL, TL, LO, LFTD,

WL, CL, GO, GL,
UO, UL, ULFTD, Equipment
CU, GU, GUL None None Planning RE
Equipment
Equipment
0~63 characters None None N/A RE

0~50, step:0.1 None None N/A RE
0~6553.5, step:0.1 None None N/A RE
0~6 None None N/A RE
TDS, LO_TD, TL,

LO, LFTD, WO,
WL, C0, CL, CW,
CWL, GO, GL, GW,
GWL, GC, GCL,
GCW, GCWL, UO,
UL, ULFTD, UW,
UWL, UC, UCL,
UCW, UCWL, GU,
GUL, GUW, GUWL,
GUC, GUCL,
GUCW, GUCWL,
NULL None None N/A RE
CONNECTHEAD,
CONNECTTAIL,
CONNECTBOTH,
SEPERATEBYBRE
AK, LINKDOWN None None N/A RE

step:100 0 None (Internal planning) RE
Radio Planning
0~10 0 None (Internal planning) RE
SUPPORT,
NOTSUPPORT None None N/A RE
5000, 4800, 4600,

4000 5000(5000) None (Internal planning) RE
Enable, Disable, Equipment
NULL Enable(Enable) Enable(Enable) Planning RE
Equipment
0~1 0 None Planning RE
0~23 characters NULL(empty string) None N/A RE
0~254 255 None N/A RE

Equipment
0~63 characters None None Planning RE
Equipment
0~62,4294967295 None None Planning RE
Equipment
0~8,4294967295 None None Planning RE
4~5,60~254,42949 Equipment
67295 None None Planning RE
INTRA_SYS_INTE
RCONN,
OUTER_SYS_INTE Equipment
RCONN, NULL NULL(NULL) None Planning RE
Radio Planning
OFF, ON OFF(OFF) None (Internal planning) RE
DISABLE, ENABLE DISABLE(Disable) None N/A RE
Alarm_0, Alarm_1,
Alarm_2, Alarm_3,
Alarm_4, Alarm_5,
Alarm_6, Alarm_7,
Alarm_8, Alarm_9,
Alarm_10,
Alarm_11,
Alarm_12,
Alarm_13,
Alarm_14,
Alarm_15 None None N/A RE
Enabled, Disabled None None N/A RE

Avail_0, Avail_1,
Avail_20, Avail_21,
Avail_500,
Avail_501,
Avail_504,
Avail_508,
Avail_509,
Avail_520,
Avail_521,
Avail_524,
Avail_528,
Avail_529,
Avail_800,
Avail_801,
Avail_820,
Avail_821,
Avail_c10,
Avail_c11,
Avail_c12,
Avail_c13,
Avail_c14,
Avail_c30,
Avail_c31,
Avail_c32,
Avail_c33,
Avail_c34,
Avail_d00,
Avail_d01,
Avail_d04,
Avail_d08,
Avail_d09,
Avail_d20,
Avail_d21,
Avail_d24,
Avail_d28,
Avail_d29 None None N/A RE

UMPT, UBBP, FAN,
UPEU, PMU, PSU,
BAT, TCU, EMU,
UTRP, USCU,
UEIU, FMU, MRRU,
MRFU, RHUB,
UBRI, MRXU,
MTXU, UCIU, CCU,
SMPT, UCXU,
AAMU, AARU,
UNKNOWN, PRRU,
MPRU, MPMU,
MPRF, AIRU,
GTMU, GBBP,
GRRU, GRFU,
GATM, DRFU,
WMPT, WBBP,
WRFU, NGRU,
LMPT, LBBP,
LRRU, LRFU,
BMPT, BBBI,
BRFU, CRFU,
UBBPX None None N/A RE
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A RE
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A RE
CABINET,
SUBRACK,
BOARD,
SUBBOARD, SFP,
GPS None None N/A RE
0~62 0 None Engineering Design RFU
4~5 None None Engineering Design RFU

0~8 None None Engineering Design RFU
MRFU, MTXU,
GRFU, DRFU,
WRFU, LRFU,
BRFU, CRFU None None Engineering Design RFU

UNBLOCKED ocked) ocked) Engineering Design RFU
Alarm_0, Alarm_1,
Alarm_2, Alarm_3,
Alarm_4, Alarm_5,
Alarm_6, Alarm_7,
Alarm_8, Alarm_9,
Alarm_10,
Alarm_11,
Alarm_12,
Alarm_13,
Alarm_14,
Alarm_15 None None N/A RFU
Enabled, Disabled None None N/A RFU
Avail_0, Avail_1,
Avail_20, Avail_21,
Avail_500,
Avail_501,
Avail_504,
Avail_508,
Avail_509,
Avail_520,
Avail_521,
Avail_524,
Avail_528,
Avail_529,
Avail_800,
Avail_801,
Avail_820,
Avail_821,
Avail_c10,
Avail_c11,
Avail_c12,
Avail_c13,
Avail_c14,
Avail_c30,
Avail_c31,
Avail_c32,
Avail_c33,
Avail_c34,
Avail_d00,
Avail_d01,
Avail_d04,
Avail_d08,
Avail_d09,
Avail_d20,
Avail_d21,
Avail_d24,
Avail_d28,
Avail_d29 None None N/A RFU
0~2047 characters None None N/A RFU

UMPT, UBBP, FAN,
UPEU, PMU, PSU,
BAT, TCU, EMU,
UTRP, USCU,
UEIU, FMU, MRRU,
MRFU, RHUB,
UBRI, MRXU,
MTXU, UCIU, CCU,
SMPT, UCXU,
AAMU, AARU,
UNKNOWN, PRRU,
MPRU, MPMU,
MPRF, AIRU,
GTMU, GBBP,
GRRU, GRFU,
GATM, DRFU,
WMPT, WBBP,
WRFU, NGRU,
LMPT, LBBP,
LRRU, LRFU,
BMPT, BBBI,
BRFU, CRFU,
UBBPX None None N/A RFU
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A RFU
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A RFU
CABINET,
SUBRACK,
BOARD,
SUBBOARD, SFP,
GPS None None N/A RFU
ON, OFF OFF(OFF) OFF(OFF) Engineering Design RFU
1.4~10, step:0.1 30 None Engineering Design RFU
1.4~3, step:0.1 20 None Engineering Design RFU
Equipment
0~20 None None Planning RFU
Equipment
Equipment
TRUNK, BRANCH TRUNK(TRUNK) TRUNK(TRUNK) Planning RFU
TDL, TL, LO, LFTD,

WL, CL, GO, GL,
CU, GU, GUL None None Planning RFU
Equipment
Equipment

0~50, step:0.1 None None N/A RFU
0~6553.5, step:0.1 None None N/A RFU
0~6 None None N/A RFU
TDS, LO_TD, TL,

LO, LFTD, WO,
WL, C0, CL, CW,
CWL, GO, GL, GW,
GWL, GC, GCL,
GCW, GCWL, UO,
UL, ULFTD, UW,
UWL, UC, UCL,
UCW, UCWL, GU,
GUL, GUW, GUWL,
GUC, GUCL,
GUCW, GUCWL,
NULL None None N/A RFU
CONNECTHEAD,
CONNECTTAIL,
CONNECTBOTH,
SEPERATEBYBRE
AK, LINKDOWN None None N/A RFU

step:100 0 None (Internal planning) RFU
Radio Planning
0~10 0 None (Internal planning) RFU
SUPPORT,
NOTSUPPORT None None N/A RFU
5000, 4800, 4600,

4000 5000(5000) None (Internal planning) RFU
NULL Enable(Enable) Enable(Enable) Planning RFU
Equipment
0~1 0 None Planning RFU
0~23 characters NULL(empty string) None N/A RFU
0~254 255 None N/A RFU

Equipment
0~63 characters None None Planning RFU
Equipment
0~62,4294967295 None None Planning RFU
Equipment
0~8,4294967295 None None Planning RFU
4~5,60~254,42949 Equipment
67295 None None Planning RFU
INTRA_SYS_INTE
RCONN,
RCONN, NULL NULL(NULL) None Planning RFU

Radio Planning
OFF, ON OFF(OFF) None (Internal planning) RFU
DISABLE, ENABLE DISABLE(Disable) None N/A RFU
0 0 None Engineering Design RRU

60~254 None None Engineering Design RRU
0~3 0 None Engineering Design RRU
0~40 characters NULL(empty string) None Engineering Design RRU

MRRU, MRXU,
PRRU, MPRU,
MPMU, MPRF,
AIRU, GRRU,
LRRU None None Engineering Design RRU
0~5 None None N/A RRU

UNBLOCKED ocked) ocked) Engineering Design RRU
Alarm_0, Alarm_1,
Alarm_2, Alarm_3,
Alarm_4, Alarm_5,
Alarm_6, Alarm_7,
Alarm_8, Alarm_9,
Alarm_10,
Alarm_11,
Alarm_12,
Alarm_13,
Alarm_14,
Alarm_15 None None N/A RRU
Enabled, Disabled None None N/A RRU

Avail_0, Avail_1,
Avail_20, Avail_21,
Avail_500,
Avail_501,
Avail_504,
Avail_508,
Avail_509,
Avail_520,
Avail_521,
Avail_524,
Avail_528,
Avail_529,
Avail_800,
Avail_801,
Avail_820,
Avail_821,
Avail_c10,
Avail_c11,
Avail_c12,
Avail_c13,
Avail_c14,
Avail_c30,
Avail_c31,
Avail_c32,
Avail_c33,
Avail_c34,
Avail_d00,
Avail_d01,
Avail_d04,
Avail_d08,
Avail_d09,
Avail_d20,
Avail_d21,
Avail_d24,
Avail_d28,
Avail_d29 None None N/A RRU
0~2047 characters None None N/A RRU

UMPT, UBBP, FAN,
UPEU, PMU, PSU,
BAT, TCU, EMU,
UTRP, USCU,
UEIU, FMU, MRRU,
MRFU, RHUB,
UBRI, MRXU,
MTXU, UCIU, CCU,
SMPT, UCXU,
AAMU, AARU,
UNKNOWN, PRRU,
MPRU, MPMU,
MPRF, AIRU,
GTMU, GBBP,
GRRU, GRFU,
GATM, DRFU,
WMPT, WBBP,
WRFU, NGRU,
LMPT, LBBP,
LRRU, LRFU,
BMPT, BBBI,
BRFU, CRFU,
UBBPX None None N/A RRU
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A RRU
-
2147483648~2147
483647(metric
system);-
2147483648~2147
483647(imperial
system) None None N/A RRU
CABINET,
SUBRACK,
BOARD,
SUBBOARD, SFP,
GPS None None N/A RRU
ON, OFF OFF(OFF) OFF(OFF) Engineering Design RRU
1.4~10, step:0.1 30 None Engineering Design RRU
1.4~3, step:0.1 20 None Engineering Design RRU
Equipment
0~20 None None Planning RRU
Equipment
Equipment
TRUNK, BRANCH TRUNK(TRUNK) TRUNK(TRUNK) Planning RRU
TDL, TL, LO, LFTD,
WL, CL, GO, GL,
CU, GU, GUL None None Planning RRU
Equipment
Equipment
0~50, step:0.1 None None N/A RRU
0~6553.5, step:0.1 None None N/A RRU

TDS, LO_TD, TL,
LO, LFTD, WO,
WL, C0, CL, CW,
CWL, GO, GL, GW,
GWL, GC, GCL,
GCW, GCWL, UO,
UL, ULFTD, UW,
UWL, UC, UCL,
UCW, UCWL, GU,
GUL, GUW, GUWL,
GUC, GUCL,
GUCW, GUCWL,
NULL None None N/A RRU
CONNECTHEAD,
CONNECTTAIL,
CONNECTBOTH,
SEPERATEBYBRE
AK, LINKDOWN None None N/A RRU
step:100 0 None (Internal planning) RRU
Radio Planning
0~10 0 None (Internal planning) RRU
SUPPORT,
NOTSUPPORT None None N/A RRU
5000, 4800, 4600,
4000 5000(5000) None (Internal planning) RRU

NULL Enable(Enable) Enable(Enable) Planning RRU
Equipment
0~1 0 None Planning RRU
0~23 characters NULL(empty string) None N/A RRU
0~254 255 None N/A RRU

Equipment
0~63 characters None None Planning RRU
Equipment
0~62,4294967295 None None Planning RRU
Equipment
0~8,4294967295 None None Planning RRU
4~5,60~254,42949 Equipment
67295 None None Planning RRU
INTRA_SYS_INTE
RCONN,
RCONN, NULL NULL(NULL) None Planning RRU

Radio Planning
OFF, ON OFF(OFF) None (Internal planning) RRU
DISABLE, ENABLE DISABLE(Disable) None N/A RRU
0~249 None None Engineering Design RRUCHAIN

CHAIN, RING,
LOADBALANCE None None Engineering Design RRUCHAIN
COLD, HOT COLD(COLD) None Engineering Design RRUCHAIN
0~7 0 None Engineering Design RRUCHAIN
0~1,60~254 0 None Engineering Design RRUCHAIN
0~7 0 None Engineering Design RRUCHAIN
0~1,60~254 0 None Engineering Design RRUCHAIN
Equipment
0~21,255 255 None Planning RRUCHAIN
Equipment
0~21,255 255 None Planning RRUCHAIN
LOCALPORT, LOCALPORT(local
PEERPORT port) None Engineering Design RRUCHAIN
1.25G, 2.5G, 4.9G,

6.1G, 9.8G, AUTO AUTO(Auto) None Engineering Design RRUCHAIN
0~3 None None N/A RRUCHAIN
0~3 None None N/A RRUCHAIN
0~62 0 None Engineering Design RXBRANCH

4~5,60~254 None None Engineering Design RXBRANCH
0~8 0 None Engineering Design RXBRANCH
0~8 None None Engineering Design RXBRANCH
ON, OFF ON(ON) ON(ON) Engineering Design RXBRANCH

0~30, step:0.5 0 None Engineering Design RXBRANCH
ON, OFF None None N/A RXBRANCH
Radio Planning
-13~13, step:0.1 0 None (Internal planning) RXBRANCH
Radio Planning
Radio Planning
Radio Planning
Radio Planning
Radio Planning
Radio Planning
Radio Planning
0~429496729.5,
step:0.1 None None N/A RXBRANCH
0~429496729.5,
0~31 None None N/A RXBRANCH
0~429496729.5,
0~429496729.5,
0~31 None None N/A RXBRANCH

0~62 None None Engineering Design TXBRANCH
4~5,60~254 None None Engineering Design TXBRANCH

ON, OFF, NULL ON(ON) ON(ON) Engineering Design TXBRANCH
1~25, step:0.01 None None N/A TXBRANCH

ON, OFF None None N/A TXBRANCH
0,5000~655000,
step:10 None None N/A TXBRANCH
0~429496729.5,
step:0.1 None None N/A TXBRANCH
0~429496729.5,
0,5000~655000,
step:10 None None N/A TXBRANCH
0~429496729.5,
0~429496729.5,
0~31 None None N/A TXBRANCH

0~429496729.5,
0~429496729.5,
0~31 None None N/A TXBRANCH
Equipment
Valid IP address 0.0.0.0 None Planning NTPCP
Equipment
1~525600 None 6 hours Planning NTPCP
123~5999,6100~65 Equipment
534 123 None Planning NTPCP
Default/Recommen
IPV4, IPV6 IPV4(IPv4) IPV4(IPv4) ded Value NTPCP
Equipment
Valid IP address 0:0:0:0:0:0:0:0 None Planning NTPCP
PLAIN, DES_S,
DES_N, DES_A, Equipment
MD5 PLAIN(Plain) PLAIN(Plain) Planning NTPCP
Equipment
1~16 characters None None Planning NTPCP
Equipment
1~4294967295 None None Planning NTPCP
Slaver, Master Slaver(Slave) Slaver(Slave) Engineering Design NTPCP

GMT-1200, GMT-
1100, GMT-1000,
GMT-0930, GMT-
0900, GMT-0800,
GMT-0700, GMT-
0600, GMT-0500,
GMT-0430, GMT-
0400, GMT-0330,
GMT-0300, GMT-
0200, GMT-0100,
GMT, GMT+0100,
GMT+0200,
GMT+0300,
GMT+0330,
GMT+0400,
GMT+0430,
GMT+0500,
GMT+0530,
GMT+0545,
GMT+0600,
GMT+0630,
GMT+0700,
GMT+0800,
GMT+0845,
GMT+0900,
GMT+0930,
GMT+1000,
GMT+1030,
GMT+1100,
GMT+1130,
GMT+1200,
GMT+1245,
GMT+1300,
GMT+1400, GMT+0800(GMT+0 GMT+0800(GMT+0 Equipment
CUSTOM 8:00) 8:00) Planning TZ
Equipment
NO, YES NO(No) NO(No) Planning TZ
DATE, WEEK, Equipment
DATEWEEK DATE(Date mode) DATE(Date mode) Planning TZ
JAN, FEB, MAR,

APR, MAY, JUN,
JUL, AUG, SEP, Equipment
OCT, NOV, DEC JAN(January) JAN(January) Planning TZ
Equipment
1~31 1 None Planning TZ
LAST, FIRST,
SECOND, THIRD, Equipment
FOURTH FIRST(First) FIRST(First) Planning TZ
MON, TUE, WED,

THU, FRI, SAT, Equipment
SUN MON(Monday) MON(Monday) Planning TZ
Equipment
00:00:00~23:59:59 0:00:00 None Planning TZ
DATE, WEEK, Equipment
DATEWEEK DATE(Date mode) DATE(Date mode) Planning TZ
JAN, FEB, MAR,

APR, MAY, JUN,
JUL, AUG, SEP, Equipment
OCT, NOV, DEC JAN(January) JAN(January) Planning TZ
Equipment
1~31 1 None Planning TZ
LAST, FIRST,
SECOND, THIRD, Equipment
FOURTH FIRST(First) FIRST(First) Planning TZ
MON, TUE, WED,

THU, FRI, SAT, Equipment
SUN MON(Monday) MON(Monday) Planning TZ
Equipment
00:00:00~23:59:59 0:00:00 None Planning TZ
Equipment
-120~120 0 0 Planning TZ
-720~840 0 None Engineering Design TZ
2000-01-01~2033-
12-31 None None N/A OMUCURTIME
00:00:00~23:59:59 None None N/A OMUCURTIME
None None None N/A OMUCURTIME

NTP, GPS, NONE, Equipment
SYSCLK NTP(NTP) NTP(NTP) Planning TIMESRC
0~30 characters NULL(empty string) None N/A TIMESRC
Auto, Plaintext,
Encrypted Auto(Auto) Auto(Auto) Engineering Design FTPCLT
No, Yes Yes(Yes) Yes(Yes) Engineering Design FTPCLT
No, Yes No(No) No(No) Engineering Design FTPCLT
Default/Recommen
Valid IP address 127.0.0.1 None ded Value FTPCLTPORT
Default/Recommen
21~65535 21 None ded Value FTPCLTPORT
Radio Planning CnOperatorExtende

0~5 None None (Internal planning) dQci
CnOperatorExtende
10~254 None None Engineering Design dQci
CnOperatorExtende
0~9 0 None Engineering Design dQci
CnOperatorExtende
0~5 None None Engineering Design CnOperatorHoCfg
EUTRAN_TDD,
EUTRAN_FDD, Default/Recommen
EUTRAN EUTRAN EUTRAN ded Value CnOperatorHoCfg
EUTRAN_TDD,
EUTRAN_FDD, Default/Recommen
EUTRAN, NULL NULL NULL ded Value CnOperatorHoCfg
Default/Recommen
-100,-20~20 0 0 ded Value CnOperatorHoCfg
Default/Recommen
Default/Recommen
Default/Recommen
Radio Planning
0~5 None None (Internal planning) CnOperatorSpidCfg
1~256 None None Engineering Design CnOperatorSpidCfg
NOT_CFG(NOT_C Radio Planning

NOT_CFG, CFG FG) None (Internal planning) CnOperatorSpidCfg
Radio Planning
0~255 0 None (Internal planning) CnOperatorSpidCfg
Radio Planning CnOperatorStandar

0~5 None None (Internal planning) dQci
QCI1, QCI2, QCI3,
QCI4, QCI5, QCI6, CnOperatorStandar
QCI7, QCI8, QCI9 None None Engineering Design dQci
CnOperatorStandar
CnOperatorStandar
CSFallBackBlindHo
0~5 None None Engineering Design Cfg
UTRAN, GERAN, Default/Recommen CSFallBackBlindHo
CDMA2000 UTRAN UTRAN ded Value Cfg
CDMA2000, NULL GERAN GERAN ded Value Cfg
CDMA2000, NULL CDMA2000 CDMA2000 ded Value Cfg
Default/Recommen CSFallBackBlindHo
OFF, ON OFF(Off) OFF(Off) ded Value Cfg

CDMA2000 UTRAN UTRAN ded Value Cfg

CDMA2000, NULL GERAN GERAN ded Value Cfg
CDMA2000, NULL CDMA2000 CDMA2000 ded Value Cfg
REDIRECTION:On, REDIRECTION:On,
REDIRECTION, CCO_HO:On, CCO_HO:On, Default/Recommen CSFallBackPolicyCf
CCO_HO, PS_HO PS_HO:On PS_HO:On ded Value g
REDIRECTION:On, REDIRECTION:On,
REDIRECTION, CCO_HO:On, CCO_HO:On, Default/Recommen CSFallBackPolicyCf
CCO_HO, PS_HO PS_HO:On PS_HO:On ded Value g
Radio Planning
0~5 None None (Internal planning) InterPlmnHoList
Radio Planning
(Negotiation with
000~999 None None the peer) InterPlmnHoList
Radio Planning
(Negotiation with
00~99,000~999 None None the peer) InterPlmnHoList
RatFreqPriorityGrou
0~255 None None Engineering Design p
EUTRAN, UTRAN,
GERAN,
CDMA20001XRTT, Default/Recommen RatFreqPriorityGrou
CDMA2000HRPD None None ded Value p
0~45589,54436~65 Radio Planning RatFreqPriorityGrou

535 None None (Internal planning) p
Radio Planning RatFreqPriorityGrou

0~7 0 None (Internal planning) p
GSM_dcs1800, RatFreqPriorityGrou
GSM_pcs1900 GSM_dcs1800 None Engineering Design p
Radio Planning ServiceIfHoCfgGrou
0~5 None None (Internal planning) p
ServiceIfHoCfgGrou
NO_HO, Default/Recommen ServiceIfHoCfgGrou

PERMIT_HO NO_HO NO_HO ded Value p
0~45589,64436~65 Radio Planning ServiceIfHoCfgGrou
535 0 0 (Internal planning) p
Radio Planning ServiceIrHoCfgGro

0~5 None None (Internal planning) up
ServiceIrHoCfgGro
0~9 None None Engineering Design up
NO_HO,
PERMIT_HO, Default/Recommen ServiceIrHoCfgGro
MUST_HO NO_HO NO_HO ded Value up
1~256 None None Engineering Design SpidCfg

Default/Recommen
FALSE, TRUE FALSE(FALSE) None ded Value SpidCfg
NOT_CFG(NOT_C Radio Planning

NOT_CFG, CFG FG) None (Internal planning) SpidCfg
Radio Planning
0~255 0 None (Internal planning) SpidCfg
Default/Recommen
FALSE, TRUE TRUE(TRUE) None ded Value SpidCfg
Default/Recommen
Default/Recommen
Default/Recommen
FALSE, TRUE FALSE(FALSE) None ded Value SpidCfg
Radio Planning eNBCnOpQciRsvd

0~5 None None (Internal planning) Para
Radio Planning eNBCnOpQciRsvd
1~9 None None (Internal planning) Para
4, ameter0_bit14:Off,
RsvdSwPara0_bit1 ReservedSwitchPar
RsvdSwPara0_bit3 ReservedSwitchPar eNBCnOpQciRsvd
2 ameter0_bit32:Off None Engineering Design Para
2 ameter1_bit32:Off None Engineering Design Para
4, ameter2_bit14:On,
2 ameter2_bit32:On None Engineering Design Para
eNBCnOpQciRsvd
0~4294967295 0 None Engineering Design Para
eNBCnOpQciRsvd
eNBCnOpQciRsvd
eNBCnOpQciRsvd
eNBCnOpQciRsvd
eNBCnOpQciRsvd
eNBCnOpQciRsvd
eNBCnOpQciRsvd
eNBCnOpQciRsvd
eNBCnOpQciRsvd
eNBCnOpQciRsvd
eNBCnOpQciRsvd
eNBCnOpQciRsvd
eNBCnOpQciRsvd
eNBCnOpQciRsvd
eNBCnOpQciRsvd
eNBCnOpQciRsvd
eNBCnOpQciRsvd
eNBCnOpQciRsvd
eNBCnOpQciRsvd
Radio Planning
1~64 characters None None (Internal planning) eNodeBFunction
1~255 1 None N/A eNodeBFunction
Radio Planning
0~1048575 0 None (Internal planning) eNodeBFunction
0~256 characters NULL(empty string) None Engineering Design eNodeBFunction
0~64 characters NULL(empty string) None N/A eNodeBFunction

Default/Recommen
0,10~600 0 0 ded Value CounterCheckPara
Default/Recommen
0,128~4294967295 0 0 ded Value CounterCheckPara
OFF, ON OFF(Off) OFF(Off) Engineering Design CounterCheckPara
NULL, Snow3G, AES(AES AES(AES

AES, ZUC Algorithm) Algorithm) Engineering Design ENodeBCipherCap
NULL, Snow3G, Snow3G(SNOW 3G Snow3G(SNOW 3G

NULL, Snow3G, ZUC(ZUC ZUC(ZUC

NULL, Snow3G, NULL(NULL NULL(NULL
Default/Recommen ENodeBConnState
10~200 20 20 ded Value Timer
1~65535 5000 5000 ded Value Timer
1~65535 5000 5000 ded Value Timer
1~65535 10000 10000 ded Value Timer
1~65535 8000 8000 ded Value Timer
1~65535 5000 5000 ded Value Timer
1~65535 5000 5000 ded Value Timer
NULL, Snow3G, AES(AES AES(AES ENodeBIntegrityCa

AES, ZUC Algorithm) Algorithm) Engineering Design p
NULL, Snow3G, Snow3G(SNOW 3G Snow3G(SNOW 3G ENodeBIntegrityCa

NULL, Snow3G, ZUC(ZUC ZUC(ZUC ENodeBIntegrityCa

Enable(Enable Enable(Enable ENodeBIntegrityCa
Disable, Enable NULL Algorithm) NULL Algorithm) Engineering Design p
OFF, ON OFF(Off) OFF(Off) Engineering Design PdcpRohcPara

U_MODE, O_MODE(Bi- O_MODE(Bi-
O_MODE, directional directional
R_MODE Optimistic Mode) Optimistic Mode) Engineering Design PdcpRohcPara
Profile0x0001, Profile0x0001:on, Profile0x0001:on,
Profile0x0004 Profile0x0004:on Profile0x0004:on Engineering Design PdcpRohcPara
Default/Recommen
1~16 4 4 ded Value RrcConnStateTimer
min5, min10,
min20, min30,
min60, min120, Default/Recommen
min180 min10(10) min10(10) ded Value RrcConnStateTimer
ms50, ms100,
ms150, ms200,
ms500, ms1000, Default/Recommen
ms2000 ms500(500) ms500(500) ded Value RrcConnStateTimer
ms100, ms200,
ms500, ms1000,
ms2000, ms4000, Default/Recommen
ms8000 ms8000(8000) ms8000(8000) ded Value RrcConnStateTimer
min5, min10,
min20, min30,
min60, min120, Default/Recommen
min180 min120(120) min120(120) ded Value RrcConnStateTimer
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
0~255 None None N/A TceIpMapping
Transport
Planning(Negotiatio
IPv4, IPv6 IPv4(IPv4 Address) None n with the peer) TceIpMapping
Transport
Planning(Negotiatio
Valid IP address 0.0.0.0 None n with the peer) TceIpMapping
Transport
Planning(Negotiatio
Valid IP address 0:0:0:0:0:0:0:0 None n with the peer) TceIpMapping
Radio Planning X2AutoSetupOpera

000~999 None None (Internal planning) tor
Radio Planning X2AutoSetupOpera

00~99,000~999 None None (Internal planning) tor
0~17 None None Engineering Design CaMgtCfg

Default/Recommen
-140~-43 -109 -109 ded Value CaMgtCfg
Default/Recommen
-140~-43 -105 -105 ded Value CaMgtCfg
Default/Recommen
OFF, ON OFF(Off) OFF(Off) ded Value CaMgtCfg
Default/Recommen
1~30 9 9 ded Value CaMgtCfg
Default/Recommen
Default/Recommen
Default/Recommen
Radio Planning
0~17 None None (Internal planning) CellDlCompAlgo
Default/Recommen
-15~15, step:0.5 -12 -12 ded Value CellDlCompAlgo
Radio Planning
0~17 None None (Internal planning) CellDlpcPdschPa
Default/Recommen
OFF, ON OFF(Off) OFF(Off) ded Value CellDlpcPdschPa
DB_6_P_A,
DB_4DOT77_P_A,
DB_3_P_A,
DB_1DOT77_P_A, Dual-antenna or
DB0_P_A, four-antenna:
DB1_P_A, DB_3_P_A(-3 dB)
DB2_P_A, Single-antenna: Default/Recommen
DB3_P_A DB_3_P_A(-3 dB) DB0_P_A(0 dB) ded Value CellDlpcPdschPa
Radio Planning
0~17 None None (Internal planning) CellDrxPara
Default/Recommen
0~1000 1000 1000 ded Value CellDrxPara
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
40~6000, step:20 30 30 ded Value CellDrxPara
Default/Recommen
OFF, ON OFF(Off) None ded Value CellDrxPara
Default/Recommen
40~6000, step:20 50 None ded Value CellDrxPara
Default/Recommen
0~1999 800 None ded Value CellDrxPara
Default/Recommen
0~1999 900 None ded Value CellDrxPara
SF10, SF20, SF32,
SF40, SF64, SF80,
SF128, SF160,
SF256, SF320,
SF512, SF640,
SF1024, SF1280, SF1280(1280 SF1280(1280
SF2048, SF2560 subframes) subframes) Engineering Design CellDrxPara
OFF, ON OFF(Off) OFF(Off) Engineering Design CellDrxPara
PSF1, PSF2, PSF3,

PSF4, PSF5, PSF6,
PSF8, PSF10,
PSF20, PSF30,
PSF40, PSF50,
PSF60, PSF80, PSF5(5 PDCCH PSF5(5 PDCCH
PSF100, PSF200 subframes) subframes) Engineering Design CellDrxPara
PSF200, PSF300,
PSF500, PSF750,
PSF1280, PSF1280(1280 PSF1280(1280
PSF1920, PSF2560 PDCCH subframes) PDCCH subframes) Engineering Design CellDrxPara
0~17 None None Engineering Design CellHoParaCfg

-140~-43 -121 -121 Engineering Design CellHoParaCfg
Default/Recommen
-20~-3, step:0.5 -28 -28 ded Value CellHoParaCfg
Radio Planning
0~17 None None (Internal planning) CellUlCompAlgo
Default/Recommen
-15~15, step:0.5 -20 -20 ded Value CellUlCompAlgo
Radio Planning
0~17 None None (Internal planning) CellUlpcDedic
UU_DISABLE, UU_DISABLE(Disa UU_DISABLE(Disa Default/Recommen

UU_ENABLE ble) ble) ded Value CellUlpcDedic
-10.5,-9,-7.5,-6,-
4.5,-3,-
1.5,0,1.5,3,4.5,6,7.5 Default/Recommen
,9,10.5,12 -30 -30 ded Value CellUlpcDedic
Default/Recommen
-3~12 -30 -30 ded Value CellUlpcDedic
UU_FC0_FILTER_
COEFF,
UU_FC1_FILTER_
COEFF,
UU_FC2_FILTER_
COEFF,
UU_FC3_FILTER_
COEFF,
UU_FC4_FILTER_
COEFF,
UU_FC5_FILTER_
COEFF,
UU_FC6_FILTER_
COEFF,
UU_FC7_FILTER_
COEFF,
UU_FC8_FILTER_
COEFF,
UU_FC9_FILTER_
COEFF,
UU_FC11_FILTER_
COEFF,
UU_FC13_FILTER_
COEFF,
UU_FC15_FILTER_
COEFF,
UU_FC17_FILTER_
COEFF, UU_FC6_FILTER_ UU_FC6_FILTER_
UU_FC19_FILTER_ COEFF(UU_FC6_F COEFF(UU_FC6_F Default/Recommen
COEFF ILTER_COEFF) ILTER_COEFF) ded Value CellUlpcDedic
0~17 None None Engineering Design DistBasedHO
EUTRAN:Off, EUTRAN:Off,
EUTRAN, GERAN, GERAN:Off, GERAN:Off,
UTRAN UTRAN:Off UTRAN:Off Engineering Design DistBasedHO
system);300~32810 system);33(imperial system);33(imperial
0(imperial system) system) system) Engineering Design DistBasedHO
Radio Planning
0~17 None None (Internal planning) DrxParaGroup
0~9 None None Engineering Design DrxParaGroup

QCI 1 and QCI 5:
ON(On)
QCI 2 and QCI 3:
OFF(Off)
QCI 4 and QCI 7:
ON(On)
QCI 6, QCI 8, and
OFF, ON OFF(Off) QCI 9: ON(On) Engineering Design DrxParaGroup
subframes)
QCI 6, QCI 8, and
QCI 9 for TDD in
subframe
configuration 1:
PSF2(2 PDCCH
subframes)
QCI 6, QCI 8, and
QCI 9 for TDD in
subframe
configuration 2:
PSF4(4 PDCCH
subframes)
QCI 6, QCI 8, and
QCI 9 for TDD in
subframe
configuration 3:
PSF4(4 PDCCH
subframes)
QCI 6, QCI 8, and
QCI 9 for TDD in
subframe
configuration 4:
PSF4(4 PDCCH
subframes)
QCI 6, QCI 8, and
QCI 9 for TDD in
subframe
configuration 5:
PSF4(4 PDCCH
PSF1, PSF2, PSF3, subframes)
PSF4, PSF5, PSF6, QCI 6, QCI 8, and
PSF8, PSF10, QCI 9 for TDD in
PSF20, PSF30, subframe
PSF40, PSF50, configuration 6:
PSF100, PSF200 subframes) subframes) Engineering Design DrxParaGroup
subframes)
QCI 6, QCI 8, and
QCI 9 for TDD in
subframe
configuration 1:
PSF3(3 PDCCH
subframes)
QCI 6, QCI 8, and
QCI 9 for TDD in
subframe
configuration 2:
PSF5(5 PDCCH
subframes)
QCI 6, QCI 8, and
QCI 9 for TDD in
subframe
configuration 3:
PSF6(6 PDCCH
subframes)
QCI 6, QCI 8, and
QCI 9 for TDD in
subframe
configuration 4:
PSF8(8 PDCCH
subframes)
QCI 6, QCI 8, and
QCI 9 for TDD in
PSF1, PSF2, PSF3, subframe
PSF4, PSF5, PSF6, configuration 5:
PSF8, PSF10, PSF10(10 PDCCH
PSF20, PSF30, subframes)
PSF40, PSF50, QCI 6, QCI 8, and
PSF60, PSF80, QCI 9 for TDD in
PSF300, PSF500, configuration 6:
PSF1920, PSF2560 subframes) subframes) Engineering Design DrxParaGroup
QCI 1 and QCI 5:
PSF8(8 PDCCH
subframes)
QCI 4 and QCI 7:
PSF8(8 PDCCH
PSF1, PSF2, PSF4, subframes)
PSF6, PSF8, QCI 6, QCI 8, and
PSF16, PSF24, PSF8(8 PDCCH QCI 9: PSF8(8
PSF33 subframes) PDCCH subframes) Engineering Design DrxParaGroup
FDD with
performance
priority:
QCI 1 and QCI 5:
SF20(20
subframes)
QCI 4 and QCI 7:
SF40(40
subframes)
QCI 6, QCI 8, and
QCI 9: SF40(40
subframes)
FDD with energy
saving priority:
QCI 1 and QCI 5:
SF20(20
SF10, SF20, SF32, subframes)
SF40, SF64, SF80, QCI 4 and QCI 7:
SF128, SF160, SF80(80
SF256, SF320, subframes)
SF512, SF640, QCI 6, QCI 8, and
SF1024, SF1280, SF40(40 QCI 9: SF320(320
SF2048, SF2560 subframes) subframes) Engineering Design DrxParaGroup
QCI 1 and QCI 5:

UU_DISABLE(Disa
ble)
QCI 2 and QCI 3:
UU_DISABLE(Disa
ble)
QCI 4 and QCI 7:
UU_ENABLE(Enabl
e)
QCI QCI 6, QCI 8,
and QCI 9:
UU_DISABLE, UU_ENABLE(Enabl UU_ENABLE(Enabl
UU_ENABLE e) e) Engineering Design DrxParaGroup
FDD with
performance
priority:
QCI 4 and QCI 7:
SF20(20
subframes)
QCI 6, QCI 8, and
QCI 9: SF20(20
subframes)
FDD with energy
SF2, SF5, SF8, saving priority:
SF10, SF16, SF20, QCI 4 and QCI 7:
SF32, SF40, SF64, SF20(20
SF160, SF256, QCI 6, QCI 8, and
SF320, SF512, SF20(20 QCI 9: SF80(80
SF640 subframes) subframes) Engineering Design DrxParaGroup
FDD with
performance
priority:
QCI 4 and QCI 7: 1
QCI 6, QCI 8, and
QCI 9: 1
FDD with energy
saving priority:
QCI 4 and QCI 7: 1
QCI 6, QCI 8, and
1~16 1 QCI 9: 1 Engineering Design DrxParaGroup
Radio Planning
0~17 None None (Internal planning) GeranInterfArfcn
Radio Planning
0~1023 None None (Internal planning) GeranInterfArfcn
GSM_dcs1800,
GSM_pcs1900 GSM_dcs1800 None Engineering Design GeranInterfArfcn
InterRatHoCommGr
0~17 None None Engineering Design oup
InterRatHoCommGr
Default/Recommen InterRatHoCommGr
0~15, step:0.5 2 2 ded Value oup
0ms, 40ms, 64ms,
80ms, 100ms,
128ms, 160ms,
256ms, 320ms,
480ms, 512ms,
640ms, 1024ms,
1280ms, 2560ms, Default/Recommen InterRatHoCommGr
5120ms 640ms 640ms ded Value oup
-141~-43 -111 -111 ded Value oup
-20~-3, step:0.5 -20 -20 ded Value oup
-141~-43 -115 -115 ded Value oup
-20~-3, step:0.5 -24 -24 ded Value oup
0~15 6 6 ded Value oup
InterRatHoCdma1x
0~17 None None Engineering Design RttGroup
InterRatHoCdma1x
0~9 None None Engineering Design RttGroup
Default/Recommen InterRatHoCdma1x
0~15, step:0.5 2 2 ded Value RttGroup
-31.5~0, step:0.5 -28 -28 ded Value RttGroup
0ms, 40ms, 64ms,
80ms, 100ms,
128ms, 160ms,
256ms, 320ms,
480ms, 512ms,
640ms, 1024ms,
1280ms, 2560ms, Default/Recommen InterRatHoCdma1x
5120ms 640ms 640ms ded Value RttGroup
-31.5~0, step:0.5 -24 -24 ded Value RttGroup
RlfTimerConstGrou
RlfTimerConstGrou
MS100_T301,
MS200_T301,
MS300_T301,
MS400_T301,
MS600_T301,
MS1000_T301,
MS1500_T301, MS200_T301(200m MS200_T301(200m Default/Recommen RlfTimerConstGrou
MS2000_T301 s) s) ded Value p
QCI 1:
MS200_T310(200m
s)
QCI 2:
MS1000_T310(100
0ms)
QCI 3:
MS1000_T310(100
0ms)
QCI 4:
MS1000_T310(100
0ms)
QCI 5:
MS1000_T310(100
0ms)
QCI 6:
MS1000_T310(100
0ms)
QCI 7:
MS1000_T310(100
MS0_T310, 0ms)
MS50_T310, QCI 8:
MS100_T310, MS1000_T310(100
MS200_T310, 0ms)
MS500_T310, QCI 9:
MS1000_T310, MS1000_T310(100 MS1000_T310(100 Default/Recommen RlfTimerConstGrou
MS2000_T310 0ms) 0ms) ded Value p
MS1000_T311,
MS3000_T311,
MS5000_T311,
MS10000_T311,
MS15000_T311,
MS20000_T311, MS10000_T311(10 MS10000_T311(10 Default/Recommen RlfTimerConstGrou
MS30000_T311 000ms) 000ms) ded Value p
QCI 1: n6(6)
QCI 2: n10(10)
QCI 3: n10(10)
QCI 4: n10(10)
QCI 5: n10(10)
QCI 6: n10(10)
QCI 7: n10(10)
n1, n2, n3, n4, n6, QCI 8: n10(10) Default/Recommen RlfTimerConstGrou
n8, n10, n20 n10(10) QCI 9: n10(10) ded Value p
QCI 1: n5(5)
QCI 2: n1(1)
QCI 3: n1(1)
QCI 4: n1(1)
QCI 5: n1(1)
QCI 6: n1(1)
QCI 7: n1(1)
n1, n2, n3, n4, n5, QCI 8: n1(1) Default/Recommen RlfTimerConstGrou
n6, n8, n10 n1(1) QCI 9: n1(1) ded Value p
10~254 None None Engineering Design CellExtendedQci
0~17 None None Engineering Design CellExtendedQci
Default/Recommen
0~9 0 None ded Value CellExtendedQci
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
0~9 0 None Engineering Design CellExtendedQci

NOT_CFG(NOT_C
NOT_CFG, CFG FG) None Engineering Design CellExtendedQci

Radio Planning
0~17 None None (Internal planning) CellStandardQci
QCI1, QCI2, QCI3,

QCI4, QCI5, QCI6,
QCI7, QCI8, QCI9 None None Engineering Design CellStandardQci
0~9 0 None Engineering Design CellStandardQci

ms5, ms10, ms20,

ms40, ms80 ms10(SRI 10ms) None Engineering Design CellStandardQci
NOT_CFG(NOT_C
NOT_CFG, CFG FG) None Engineering Design CellStandardQci

QCI(1,5):10000
QCI(2,3,4,6,7,8,9):3
0~65000 30000 0000 Engineering Design CellStandardQci
InterRatHoCdmaHr
0~17 None None Engineering Design pdGroup
InterRatHoCdmaHr
0~9 None None Engineering Design pdGroup
Default/Recommen InterRatHoCdmaHr
0~15, step:0.5 2 2 ded Value pdGroup
-31.5~0, step:0.5 -14 -14 ded Value pdGroup
0ms, 40ms, 64ms,
80ms, 100ms,
128ms, 160ms,
256ms, 320ms,
480ms, 512ms,
640ms, 1024ms,
1280ms, 2560ms, Default/Recommen InterRatHoCdmaHr
5120ms 640ms 640ms ded Value pdGroup
-31.5~0, step:0.5 -10 -10 ded Value pdGroup
-140~-43 -113 -113 ded Value pdGroup
-20~-3 -14 -14 ded Value pdGroup
InterRatHoGeranGr
InterRatHoGeranGr
Default/Recommen InterRatHoGeranGr
0~15, step:0.5 2 2 ded Value oup
-110~-48 -100 -100 ded Value oup
0ms, 40ms, 64ms,
80ms, 100ms,
128ms, 160ms,
256ms, 320ms,
480ms, 512ms,
640ms, 1024ms,
1280ms, 2560ms, Default/Recommen InterRatHoGeranGr
5120ms 640ms 640ms ded Value oup
-110~-48 -98 -98 ded Value oup
InterRatHoUtranGro
InterRatHoUtranGro
Default/Recommen InterRatHoUtranGro
-24~0, step:0.5 -20 -20 ded Value up
-120~-25 -103 -103 ded Value up
0~15, step:0.5 2 2 ded Value up
0ms, 40ms, 64ms,
80ms, 100ms,
128ms, 160ms,
256ms, 320ms,
480ms, 512ms,
640ms, 1024ms,
1280ms, 2560ms, Default/Recommen InterRatHoUtranGro
5120ms 640ms 640ms ded Value up
-24~0, step:0.5 -18 -18 ded Value up
-120~-25 -101 -101 ded Value up
0~17 None None Engineering Design InterFreqHoGroup
0~9 None None Engineering Design InterFreqHoGroup

Default/Recommen
0~15, step:0.5 2 2 ded Value InterFreqHoGroup
0ms, 40ms, 64ms,
80ms, 100ms,
128ms, 160ms,
256ms, 320ms,
480ms, 512ms,
640ms, 1024ms,
1280ms, 2560ms, Default/Recommen
5120ms 640ms 640ms ded Value InterFreqHoGroup
Default/Recommen
-141~-43 -105 -105 ded Value InterFreqHoGroup
Default/Recommen
-20~-3, step:0.5 -20 -20 ded Value InterFreqHoGroup
Default/Recommen
Default/Recommen
Default/Recommen
0~15, step:0.5 2 2 ded Value InterFreqHoGroup
Default/Recommen
Default/Recommen
0ms, 40ms, 64ms,
80ms, 100ms,
128ms, 160ms,
256ms, 320ms,
480ms, 512ms,
640ms, 1024ms,
5120ms 640ms 640ms ded Value InterFreqHoGroup
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
-15~15, step:0.5 2 2 ded Value InterFreqHoGroup
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
0~17 None None Engineering Design IntraFreqHoGroup
0~9 None None Engineering Design IntraFreqHoGroup

Default/Recommen
0~15, step:0.5 2 2 ded Value IntraFreqHoGroup
Default/Recommen
-15~15, step:0.5 2 2 ded Value IntraFreqHoGroup
0ms, 40ms, 64ms,
80ms, 100ms,
128ms, 160ms,
256ms, 320ms,
480ms, 512ms,
640ms, 1024ms,
5120ms 320ms 320ms ded Value IntraFreqHoGroup
Radio Planning eNBCellQciRsvdPa

0~17 None None (Internal planning) ra
Radio Planning eNBCellQciRsvdPa

1~9 None None (Internal planning) ra
RsvdSwPara0_bit3 ReservedSwitchPar eNBCellQciRsvdPa
2 ameter0_bit32:Off None Engineering Design ra
2 ameter1_bit32:Off None Engineering Design ra
2 ameter2_bit32:On None Engineering Design ra
eNBCellQciRsvdPa
0~4294967295 0 None Engineering Design ra
eNBCellQciRsvdPa
eNBCellQciRsvdPa
eNBCellQciRsvdPa
eNBCellQciRsvdPa
eNBCellQciRsvdPa
eNBCellQciRsvdPa
eNBCellQciRsvdPa
eNBCellQciRsvdPa
eNBCellQciRsvdPa
eNBCellQciRsvdPa
eNBCellQciRsvdPa
eNBCellQciRsvdPa
eNBCellQciRsvdPa
eNBCellQciRsvdPa
eNBCellQciRsvdPa
eNBCellQciRsvdPa
eNBCellQciRsvdPa
eNBCellQciRsvdPa
eNBCellQciRsvdPa
Radio Planning
0~5 None None (Internal planning) CnOperator
1~32 characters None None Engineering Design CnOperator

CNOPERATOR_PR
IMARY,
CNOPERATOR_SE Radio Planning
CONDARY None None (Internal planning) CnOperator
Radio Planning
000~999 None None (Internal planning) CnOperator
Radio Planning
00~99,000~999 None None (Internal planning) CnOperator
Radio Planning
0~65535 None None (Internal planning) CnOperatorIpPath
Radio Planning
0~5 None None (Internal planning) CnOperatorIpPath
Radio Planning
0~65535 None None (Internal planning) CnOperatorTa
Radio Planning
Radio Planning
Radio Planning
0~5 None None (Internal planning) Emc
OFF, ON OFF(Off) None Engineering Design Emc

OFF, ON OFF(Off) None Engineering Design Emc
1~15 1 1 Engineering Design Emc

1~15 1 1 Engineering Design Emc
ALL_OUTPUT,
ABNORMAL_NOR ABNORMAL_ALL_
MAL_SAMPLE, NORMAL_SAMPLE
ABNORMAL_ALL_ (Abnormal All eNodeBChrOutput
NORMAL_SAMPLE Normal Sample) None Engineering Design Ctrl
eNodeBChrOutput
0~100 90 None Engineering Design Ctrl
eNodeBChrOutput
0~65535 4000 None Engineering Design Ctrl
INDEPENDENT,
SHARED_FREQ, INDEPENDENT(Ind
SEPARATED_FRE ependent Operator Radio Planning ENodeBSharingMo
Q Mode) None (Internal planning) de
OFF, ON ON(On) ON(On) Engineering Design GlobalProcSwitch

X2_OVER_M2000(
X2_OVER_M2000, X2SonLink is set up
X2_OVER_S1 over M2000) None Engineering Design GlobalProcSwitch

LCG_PROFILE_0,
LCG_PROFILE_1 LCG_PROFILE_0 LCG_PROFILE_0 Engineering Design GlobalProcSwitch
OFF, ON OFF(Off) OFF(Off) Engineering Design GlobalProcSwitch

The value OFF(Off)

is recommended if
the eNodeB
configuration data
on a network is to
be modified by
using the
interlocking
modification
function on the
CME.
The value ON(On)
is recommended if
the eNodeB
configuration data
on a network is to
be modified by
using the automatic
eNodeB
configuration
update over the X2
OFF, ON OFF(Off) interface. Engineering Design GlobalProcSwitch
SELECTED_PLMNI
D, SELECTED_PLMNI
PRIMARY_PLMNID D None Engineering Design GlobalProcSwitch
NULL,
BASED_ON_RIM,
BASED_ON_ECO NULL None Engineering Design GlobalProcSwitch

If the function of
RRC connection
reestablishment
protection is used,
you are advised to
set this parameter
0~6000 0 to 20. Engineering Design GlobalProcSwitch
The recommended
value is 0 if the
function of
automatic X2
interface
configuration
removal is not
required.
The recommended
value is 10080 if the
function of
automatic X2
interface
configuration
0~50400 0 removal is required. Engineering Design GlobalProcSwitch
PrivateCoding,
StandardCoding PrivateCoding None Engineering Design GlobalProcSwitch
OFF, ON OFF(Off) OFF Engineering Design GlobalProcSwitch
OFF, ON OFF(Off) None Engineering Design GlobalProcSwitch
Radio Planning LicenseSharingPoli

0~5 None None (Internal planning) cy
LicenseSharingPoli
1~100 None None Engineering Design cy
LicenseSharingPoli
0~100 0 None Engineering Design cy
1~300 1 None Engineering Design S1ReestTimer
1~300 300 None Engineering Design S1ReestTimer
Radio Planning
0~5 None None (Internal planning) eNBCnOpRsvdPara
2 ameter0_bit32:Off None Engineering Design eNBCnOpRsvdPara
2 ameter1_bit32:Off None Engineering Design eNBCnOpRsvdPara
2 ameter2_bit32:On None Engineering Design eNBCnOpRsvdPara
0~4294967295 0 None Engineering Design eNBCnOpRsvdPara










Radio Planning
0~65535 None None (Internal planning) eNodeBPath
Radio Planning
S1, X2 None None (Internal planning) eNodeBPath
Radio Planning
Radio Planning
Radio Planning
0~31 None None (Internal planning) S1
Radio Planning
Radio Planning
Radio Planning
Release_R8, Radio Planning
Release_R9, Release_R8(Releas (Negotiation with
Release_R10 e 8) None the peer) S1
0~256 characters NULL(empty string) None Engineering Design S1
CP_CFG, UP_CFG, CP_UP_CFG(CPU Radio Planning

CP_UP_CFG P Config) None (Internal planning) S1
Radio Planning
0~255 255 None (Internal planning) S1
0~31 None None N/A S1
Normal, Abnormal None None N/A S1
FALSE, TRUE None None N/A S1

0~159 None None N/A S1
Normal, Abnormal,
Blocked None None N/A S1
Radio Planning
0~31 None None (Internal planning) S1Interface
Radio Planning
Radio Planning
Release_R9, Release_R8(Releas (Negotiation with
Release_R10 e 8) None the peer) S1Interface
Radio Planning
FALSE, TRUE FALSE(FALSE) None (Internal planning) S1Interface
MANUAL_MODE,
AUTO_MODE MANUAL_MODE None Engineering Design S1Interface
, AUTO_CREATE (Manual Created) None N/A S1Interface
Radio Planning
0~255 255 None (Internal planning) S1Interface
Normal, Abnormal None None N/A S1Interface
Normal, Abnormal,
Blocked None None N/A S1Interface
FALSE, TRUE,
NULL None None N/A S1Interface
0~3600 None None N/A S1Interface
0~150 characters None None N/A S1Interface

0~255 None None N/A S1Interface

NULL,
LowerLinkFault,
MmecImpact,
SetupFail, CfgErr,
LicRestrict,
PlmnDiff,
TacNotCfg,
Undefine None None N/A S1Interface
Radio Planning
0~31 None None (Internal planning) MmeFeatureCfg
DISABLE, ENABLE DISABLE(disable) None Engineering Design MmeFeatureCfg
Radio Planning
0~11 None None (Internal planning) X2
Radio Planning
Radio Planning
Radio Planning

Release_R9, Release_R10(Rele (Negotiation with
Release_R10 ase 10) None the peer) X2
Equipment
0~256 characters NULL(empty string) None Planning X2
CP_CFG, UP_CFG, CP_UP_CFG(CPU Radio Planning

CP_UP_CFG P Config) None (Internal planning) X2
Normal, Abnormal,
Blocked None None N/A X2
16~111 None None N/A X2
Normal, Abnormal None None N/A X2
0~159 None None N/A X2
000~999 None None Engineering Design X2BlackWhiteList

00~99,000~999 None None Engineering Design X2BlackWhiteList
0~1048575 None None Engineering Design X2BlackWhiteList
X2_BLACK_LIST_T
YPE, X2_BLACK_LIST_T
X2_WHITE_LIST_T YPE(X2 Black List Radio Planning
YPE Type) None (Internal planning) X2BlackWhiteList
Radio Planning
16~111 None None (Internal planning) X2Interface
Radio Planning
Radio Planning
Release_R8,
Release_R9, Release_R10(Rele Radio Planning
Release_R10 ase 10) None (Internal planning) X2Interface
FORBID_AUTO_R
MV, FORBID_AUTO_R FORBID_AUTO_R
PERMIT_AUTO_R MV(Forbid Auto MV(Forbid Auto Radio Planning
MV Remove) Remove) (Internal planning) X2Interface
MANUAL_MODE,
AUTO_MODE MANUAL_MODE None Engineering Design X2Interface
, AUTO_CREATE (Manual Created) None N/A X2Interface
0~50 characters None None N/A X2Interface
0~50 characters None None N/A X2Interface
Normal, Abnormal None None N/A X2Interface
SCTP_LINK_FAULT
,
SETUP_FAILURE_
OCCUR,
PEERIN_BLACK_L
IST,
STATE_NORMAL,
SETUP_ONLY_ON
E_LINK_ALLOWED None None N/A X2Interface
OFF, ON OFF(Off) OFF(Off) Engineering Design Drx
Default/Recommen
OFF, ON ON(On) ON(On) ded Value Drx
SF10, SF20, SF32,
SF40, SF64, SF80,
SF128, SF160,
SF256, SF320,
SF512, SF640,
SF1024, SF1280, SF10(10 SF10(10 Default/Recommen
SF2048, SF2560 subframes) subframes) ded Value Drx
PSF5(5 subframes)
for FDD
PSF2(2 subframes)
for TDD in
subframe
configuration 0
PSF2(2 subframes)
for TDD in
subframe
configuration 1
PSF3(3 subframes)
for TDD in
subframe
configuration 2
PSF2(2 subframes)
for TDD in
subframe
configuration 3
PSF3(3 subframes)
for TDD in
subframe
configuration 4
PSF3(3 subframes)
PSF1, PSF2, PSF3, for TDD in
PSF8, PSF10, configuration 5
PSF20, PSF30, PSF2(2 subframes)
PSF40, PSF50, for TDD in
PSF60, PSF80, PSF5(5 PDCCH subframe Default/Recommen
PSF100, PSF200 subframes) configuration 6 ded Value Drx
PSF10(10
subframes) for FDD
PSF3(3 subframes)
for TDD in
subframe
configuration 0
PSF3(3 subframes)
for TDD in
subframe
configuration 1
PSF4(4 subframes)
for TDD in
subframe
configuration 2
PSF3(3 subframes)
for TDD in
subframe
configuration 3
PSF4(4 subframes)
for TDD in
PSF4, PSF5, PSF6, configuration 4
PSF60, PSF80, configuration 5
PSF750, PSF1280, PSF10(10 PDCCH subframe Default/Recommen
PSF1920, PSF2560 subframes) configuration 6 ded Value Drx
UU_DISABLE, UU_DISABLE(Disa UU_DISABLE(Disa Default/Recommen

UU_ENABLE ble) ble) ded Value Drx
SF2, SF5, SF8,
SF10, SF16, SF20,
SF32, SF40, SF64,
SF80, SF128,
SF160, SF256,
SF640 subframes) subframes) ded Value Drx
Default/Recommen
1~16 1 1 ded Value Drx
SF128, SF160,
SF256, SF320,
SF512, SF640,
LTE->UTRAN:
SF1280(1280
subframes)
LTE->GERAN:
SF2560(2560
subframes)
LTE->CDMA2000
1xRTT:
SF1280(1280
SF256, SF320, LTE->CDMA2000
SF512, SF640, HRPD:
10~254 None None Engineering Design ExtendedQci
IMS signaling:
IMSSignalling(IMS
Signalling)
Low-delay service:
LowDelay(Low
Delay)
TCP service or non-
real-time streaming
IMSSignalling, service:
LowDelay, TCPorBuffStreamin TCPorBuffStreamin
TCPorBuffStreamin g(TCP Based or g(TCP Based or
g Buffered Streaming) Buffered Streaming) Engineering Design ExtendedQci
IMS signaling: 1000
Low-delay service:
900
TCP service or non-
real-time streaming
0.001~1, step:0.001 700 service: 700 Engineering Design ExtendedQci
IMS signaling: 1000

Low-delay service:
900
TCP service or non-
real-time streaming
0.001~1, step:0.001 700 service: 700 Engineering Design ExtendedQci
MinGbrRate_0_KB,
MinGbrRate_1_KB,
MinGbrRate_2_KB,
MinGbrRate_4KB,
MinGbrRate_8_KB,
MinGbrRate_16_K
B,
MinGbrRate_32_K
B,
MinGbrRate_64_K
B,
MinGbrRate_128_K
B,
MinGbrRate_256_K
B,
MinGbrRate_512_K MinGbrRate_1_KB( MinGbrRate_1_KB(
B 1KB/s) 1KB/s) Engineering Design ExtendedQci
MinGbrRate_0_KB,
MinGbrRate_1_KB,
MinGbrRate_2_KB,
MinGbrRate_4KB,
MinGbrRate_8_KB,
MinGbrRate_16_K
B,
MinGbrRate_32_K
B,
MinGbrRate_64_K
B,
MinGbrRate_128_K
B,
MinGbrRate_256_K
B,
B 1KB/s) 1KB/s) Engineering Design ExtendedQci
0~1, step:0.1 10 10 Engineering Design ExtendedQci

0~39 0 None Engineering Design ExtendedQci
PBR_0_KBps,
PBR_8_KBps,
PBR_16_KBps,
PBR_32_KBps,
PBR_64_KBps,
PBR_128_KBps,
PBR_256_KBps, PBR_8_KBps(8KB/ PBR_8_KBps(8KB/
PBR_INFINITY s) s) Engineering Design ExtendedQci
9~16 11 11 Engineering Design ExtendedQci
0~39 5 None Engineering Design ExtendedQci
PAID_USER, PAID_USER(Paid PAID_USER(Paid

FREE_USER User) User) Engineering Design ExtendedQci
FLOW_CTRL, FLOW_CTRL(Flow
NON_FLOW_CTRL Control) None Engineering Design ExtendedQci
InterRatPolicyCfgGr
PS_HO:On,
PS_HO, SRVCC, SRVCC:Off, Default/Recommen InterRatPolicyCfgGr
REDIRECTION REDIRECTION:Off None ded Value oup
Default/Recommen InterRatPolicyCfgGr
SRVCC SRVCC:On None ded Value oup
PS_HO:On,
PS_HO, NACC_HO:Off,
NACC_HO, CCO_HO:Off,
CCO_HO, SRVCC, SRVCC:Off, Default/Recommen InterRatPolicyCfgGr
REDIRECTION REDIRECTION:Off None ded Value oup
CDMA1XRTTHoSw Default/Recommen InterRatPolicyCfgGr

SRVCC itch:On None ded Value oup
OPT_HO, OPT_HO:On, Default/Recommen InterRatPolicyCfgGr
NON_OPT_HO NON_OPT_HO:On None ded Value oup
PERMIT_HO_ENU
M,
FORBID_HO_ENU PERMIT_HO_ENU Default/Recommen InterRatPolicyCfgGr
M M(Permit Ho) None ded Value oup
PERMIT_FAST_AN
R_MEAS_ENUM,
FORBID_FAST_AN PERMIT_FAST_AN Default/Recommen InterRatPolicyCfgGr
R_MEAS_ENUM R_MEAS_ENUM None ded Value oup
Default/Recommen
0~15 12 None ded Value PuschParam
Default/Recommen
Default/Recommen
0~39 None None Engineering Design RlcPdcpParaGroup

QCI 1:
DiscardTimer_100(
100 ms)
QCI 2:
DiscardTimer_150(
150 ms)
QCI 3:
DiscardTimer_50(5
0 ms)
QCI 4:
DiscardTimer_300(
300 ms)
QCI 5:
DiscardTimer_150(
150 ms)
QCI 6:
DiscardTimer_Infinit
DiscardTimer_50, y(infinity)
DiscardTimer_100, QCI 7:
DiscardTimer_150, DiscardTimer_150(
DiscardTimer_300, 150 ms)
DiscardTimer_500, QCI 8:
DiscardTimer_750, DiscardTimer_Infinit
DiscardTimer_1500 y(infinity)
, QCI 9:
DiscardTimer_Infinit DiscardTimer_Infinit DiscardTimer_Infinit Default/Recommen
y y(infinity) y(infinity) ded Value RlcPdcpParaGroup
QCI 1:
RlcMode_UM(Un-
acknowledge
Mode)
QCI 2:
RlcMode_UM(Un-
acknowledge
Mode)
QCI 3:
RlcMode_UM(Un-
acknowledge
Mode)
QCI 4:
RlcMode_AM(Ackn
owledge Mode)
QCI 5:
RlcMode_AM(Ackn
owledge Mode)
QCI 6:
RlcMode_AM(Ackn
owledge Mode)
QCI 7:
RlcMode_UM(Un-
acknowledge
Mode)
QCI 8:
RlcMode_AM(Ackn
owledge Mode)
QCI 9:
RlcMode_AM, RlcMode_AM(Ackn RlcMode_AM(Ackn Default/Recommen
RlcMode_UM owledge Mode) owledge Mode) ded Value RlcPdcpParaGroup
Maxretx_Threshold
_t1,
Maxretx_Threshold
_t2,
Maxretx_Threshold
_t3,
Maxretx_Threshold
_t4,
Maxretx_Threshold
_t6,
Maxretx_Threshold
_t8,
Maxretx_Threshold
_t16,
Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold Default/Recommen
_t32 _t32(32) _t32(32) ded Value RlcPdcpParaGroup
Maxretx_Threshold
_t1,
Maxretx_Threshold
_t2,
Maxretx_Threshold
_t3,
Maxretx_Threshold
_t4,
Maxretx_Threshold
_t6,
Maxretx_Threshold
_t8,
Maxretx_Threshold
_t16,
Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold Default/Recommen
_t32 _t32(32) _t32(32) ded Value RlcPdcpParaGroup
PollByte_kb25, QCI4:
PollByte_kb50, PollByte_kb25(25
PollByte_kb75, kBytes)
PollByte_kb125, PollByte_infinity(infi
PollByte_kb250, nite kBytes)
PollByte_kb3000, PollByte_kb25(25 PollByte_kb25(25 Default/Recommen
PollByte_infinity kBytes) kBytes) ded Value RlcPdcpParaGroup
PollByte_kb125, PollByte_infinity(infi
PollByte_kb250, nite kBytes)
PollByte_kb3000, PollByte_kb25(25 PollByte_kb25(25 Default/Recommen
PollByte_infinity kBytes) kBytes) ded Value RlcPdcpParaGroup
QCI 4:
PollPdu_p32(32
PDUs)
QCI 5:
PollPdu_Infinity(infi
nite PDUs)
QCI 6:
PollPdu_p4, PollPdu_p32(32
PollPdu_p8, PDUs)
PollPdu_p16, QCI 8:
PollPdu_p64, PDUs)
PollPdu_p128, QCI 9:
PollPdu_p256, PollPdu_p32(32 PollPdu_p32(32 Default/Recommen
PollPdu_Infinity PDUs) PDUs) ded Value RlcPdcpParaGroup
QCI 4:
PollPdu_p32(32
PDUs)
QCI 5:
PollPdu_Infinity(infi
nite PDUs)
QCI 6:
PollPdu_p8, PDUs)
PollPdu_p16, QCI 8:
PollPdu_p64, PDUs)
PollPdu_p128, QCI 9:
PollPdu_p256, PollPdu_p32(32 PollPdu_p32(32 Default/Recommen
PollPdu_Infinity PDUs) PDUs) ded Value RlcPdcpParaGroup
Tpollretrans_m95,
Tpollretrans_m100,
Tpollretrans_m105,
Tpollretrans_m110,
Tpollretrans_m115,
Tpollretrans_m120,
Tpollretrans_m125,
Tpollretrans_m130,
Tpollretrans_m135,
Tpollretrans_m140,
Tpollretrans_m145,
Tpollretrans_m150,
Tpollretrans_m155,
Tpollretrans_m160,
Tpollretrans_m165,
Tpollretrans_m170,
Tpollretrans_m175,
Tpollretrans_m180,
Tpollretrans_m185,
Tpollretrans_m190,
Tpollretrans_m195,
Tpollretrans_m200,
Tpollretrans_m205,
Tpollretrans_m210,
Tpollretrans_m215,
Tpollretrans_m220,
Tpollretrans_m225,
Tpollretrans_m230,
Tpollretrans_m235,
Tpollretrans_m240,
Tpollretrans_m245,
Tpollretrans_m250,
Tpollretrans_m300,
Tpollretrans_m350,
Tpollretrans_m400,
Tpollretrans_m450, Tpollretrans_m40(4 Tpollretrans_m40(4 Default/Recommen
Tpollretrans_m500 0ms) 0ms) ded Value RlcPdcpParaGroup
Tpollretrans_m95,
Tpollretrans_m100,
Tpollretrans_m105,
Tpollretrans_m110,
Tpollretrans_m115,
Tpollretrans_m120,
Tpollretrans_m125,
Tpollretrans_m130,
Tpollretrans_m135,
Tpollretrans_m140,
Tpollretrans_m145,
Tpollretrans_m150,
Tpollretrans_m155,
Tpollretrans_m160,
Tpollretrans_m165,
Tpollretrans_m170,
Tpollretrans_m175,
Tpollretrans_m180,
Tpollretrans_m185,
Tpollretrans_m190,
Tpollretrans_m195,
Tpollretrans_m200,
Tpollretrans_m205,
Tpollretrans_m210,
Tpollretrans_m215,
Tpollretrans_m220,
Tpollretrans_m225,
Tpollretrans_m230,
Tpollretrans_m235,
Tpollretrans_m240,
Tpollretrans_m245,
Tpollretrans_m250,
Tpollretrans_m300,
Tpollretrans_m350,
Tpollretrans_m400,
Tpollretrans_m450, Tpollretrans_m50(5 Tpollretrans_m50(5 Default/Recommen
Tpollretrans_m500 0ms) 0ms) ded Value RlcPdcpParaGroup
Tstatprohibit_m95,
Tstatprohibit_m100,
Tstatprohibit_m105,
Tstatprohibit_m110,
Tstatprohibit_m115,
Tstatprohibit_m120,
Tstatprohibit_m125,
Tstatprohibit_m130,
Tstatprohibit_m135,
Tstatprohibit_m140,
Tstatprohibit_m145,
Tstatprohibit_m150,
Tstatprohibit_m155,
Tstatprohibit_m160,
Tstatprohibit_m165,
Tstatprohibit_m170,
Tstatprohibit_m175,
Tstatprohibit_m180,
Tstatprohibit_m185,
Tstatprohibit_m190,
Tstatprohibit_m195,
Tstatprohibit_m200,
Tstatprohibit_m205, QCI 4:
Tstatprohibit_m210, Tstatprohibit_m50(5
Tstatprohibit_m215, 0ms)
Tstatprohibit_m230, ms)
Tstatprohibit_m450, Tstatprohibit_m50(5 Tstatprohibit_m50(5 Default/Recommen
Tstatprohibit_m500 0ms) 0ms) ded Value RlcPdcpParaGroup
Tstatprohibit_m95,
Tstatprohibit_m100,
Tstatprohibit_m105,
Tstatprohibit_m110,
Tstatprohibit_m115,
Tstatprohibit_m120,
Tstatprohibit_m125,
Tstatprohibit_m130,
Tstatprohibit_m135,
Tstatprohibit_m140,
Tstatprohibit_m145,
Tstatprohibit_m150,
Tstatprohibit_m155,
Tstatprohibit_m160,
Tstatprohibit_m165,
Tstatprohibit_m170,
Tstatprohibit_m175,
Tstatprohibit_m180,
Tstatprohibit_m185,
Tstatprohibit_m190,
Tstatprohibit_m195,
Tstatprohibit_m200,
Tstatprohibit_m230, ms)
Tstatprohibit_m450, Tstatprohibit_m40(4 Tstatprohibit_m40(4 Default/Recommen
Tstatprohibit_m500 0ms) 0ms) ded Value RlcPdcpParaGroup
Treordering_m0,
Treordering_m5,
Treordering_m10,
Treordering_m15,
Treordering_m20,
Treordering_m25,
Treordering_m30,
Treordering_m35,
Treordering_m40,
Treordering_m45,
Treordering_m50,
Treordering_m55,
Treordering_m60,
Treordering_m65,
Treordering_m70,
Treordering_m75,
Treordering_m80,
Treordering_m85,
Treordering_m90,
Treordering_m95,
Treordering_m100,
Treordering_m110,
Treordering_m120,
Treordering_m130,
Treordering_m140,
Treordering_m150,
Treordering_m160,
Treordering_m170,
Treordering_m180,
Treordering_m190, Treordering_m50(5 Treordering_m50(5 Default/Recommen
Treordering_m200 0ms) 0ms) ded Value RlcPdcpParaGroup
Treordering_m0,
Treordering_m5,
Treordering_m10,
Treordering_m15,
Treordering_m20,
Treordering_m25,
Treordering_m30,
Treordering_m35,
Treordering_m40,
Treordering_m45,
Treordering_m50,
Treordering_m55,
Treordering_m60,
Treordering_m65,
Treordering_m70,
Treordering_m75,
Treordering_m80,
Treordering_m85,
Treordering_m90,
Treordering_m95,
Treordering_m100,
Treordering_m110,
Treordering_m120,
Treordering_m130,
Treordering_m140,
Treordering_m150,
Treordering_m160,
Treordering_m170,
Treordering_m180,
QCI 1:
PdcpSnsize_7bits(7
bits)
QCI 2:
PdcpSnsize_12bits(
12 bits)
QCI 3:
PdcpSnsize_12bits(
12 bits)
QCI 7:
PdcpSnsize_7bits, PdcpSnsize_12bits( PdcpSnsize_12bits( Default/Recommen
PdcpSnsize_12bits 12 bits) 12 bits) ded Value RlcPdcpParaGroup
QCI 1:
RlcSnSize_size5(5b
its)
QCI 2:
RlcSnSize_size10(1
0bits)
QCI 3:
RlcSnSize_size10(1
0bits)
QCI 7:
RlcSnSize_size5, RlcSnSize_size10(1 RlcSnSize_size10(1 Default/Recommen
RlcSnSize_size10 0bits) 0bits) ded Value RlcPdcpParaGroup
QCI 1:
RlcSnSize_size5(5b
its)
QCI 2:
RlcSnSize_size10(1
0bits)
QCI 3:
RlcSnSize_size10(1
0bits)
QCI 7:
RlcSnSize_size5, RlcSnSize_size10(1 RlcSnSize_size10(1 Default/Recommen
RlcSnSize_size10 0bits) 0bits) ded Value RlcPdcpParaGroup
Treordering_m0,
Treordering_m5,
Treordering_m10,
Treordering_m15,
Treordering_m20,
Treordering_m25,
Treordering_m30,
Treordering_m35,
Treordering_m40,
Treordering_m45,
Treordering_m50,
Treordering_m55,
Treordering_m60,
Treordering_m65,
Treordering_m70,
Treordering_m75,
Treordering_m80,
Treordering_m85,
Treordering_m90,
Treordering_m95, QCI 1:
Treordering_m100, Treordering_m50(5
Treordering_m110, 0ms)
Treordering_m0,
Treordering_m5,
Treordering_m10,
Treordering_m15,
Treordering_m20,
Treordering_m25,
Treordering_m30,
Treordering_m35,
Treordering_m40,
Treordering_m45,
Treordering_m50,
Treordering_m55,
Treordering_m60,
Treordering_m65,
Treordering_m70,
Treordering_m75,
Treordering_m80,
Treordering_m85,
Treordering_m90,
Default/Recommen
FALSE, TRUE TRUE(TRUE) TRUE(TRUE) ded Value RlcPdcpParaGroup
QCI1, QCI2, QCI3,
QCI4, QCI5, QCI6,
QCI7, QCI8, QCI9 None None Engineering Design StandardQci
QCI6: 1000
QCI7: 900
QCI8: 800
0.001~1, step:0.001 700 QCI9: 700 Engineering Design StandardQci
QCI6: 1000
QCI7: 900
QCI8: 800
0.001~1, step:0.001 700 QCI9: 700 Engineering Design StandardQci
MinGbrRate_0_KB,
MinGbrRate_1_KB,
MinGbrRate_2_KB,
MinGbrRate_4KB,
MinGbrRate_8_KB,
MinGbrRate_16_K
B,
MinGbrRate_32_K
B,
MinGbrRate_64_K
B,
MinGbrRate_128_K
B,
MinGbrRate_256_K
B,
B 1KB/s) 1KB/s) Engineering Design StandardQci
MinGbrRate_0_KB,
MinGbrRate_1_KB,
MinGbrRate_2_KB,
MinGbrRate_4KB,
MinGbrRate_8_KB,
MinGbrRate_16_K
B,
MinGbrRate_32_K
B,
MinGbrRate_64_K
B,
MinGbrRate_128_K
B,
MinGbrRate_256_K
B,
B 1KB/s) 1KB/s) Engineering Design StandardQci
0~1, step:0.1 10 10 Engineering Design StandardQci
0~39 0 None Engineering Design StandardQci
0~39 0 None Engineering Design StandardQci

PBR_0_KBps,
PBR_8_KBps,
PBR_16_KBps,
PBR_32_KBps,
PBR_64_KBps,
PBR_128_KBps,
PBR_256_KBps, PBR_8_KBps(8KB/ PBR_8_KBps(8KB/
PBR_INFINITY s) s) Engineering Design StandardQci
QCI 6: 9
QCI 7: 10
QCI 8: 11
9~16 11 QCI 9: 12 Engineering Design StandardQci
FLOW_CTRL, FLOW_CTRL(Flow
NON_FLOW_CTRL Control) None Engineering Design StandardQci
Radio Planning
1~9 None None (Internal planning) eNBQciRsvdPara
2 ameter0_bit32:Off None Engineering Design eNBQciRsvdPara
2 ameter1_bit32:Off None Engineering Design eNBQciRsvdPara
2 ameter2_bit32:On None Engineering Design eNBQciRsvdPara
0~4294967295 0 None Engineering Design eNBQciRsvdPara










CLASS_0,
CLASS_1, CLASS_1(CLASS_ CLASS_1(CLASS_ Default/Recommen
CLASS_2 1) 1) ded Value AlgoDefaultPara
NO_ADAPTIVE,
TxD_BF_ADAPTIV
E, MIMO_BF_ADAPTI MIMO_BF_ADAPTI
MIMO_BF_ADAPTI VE(MIMO_BF_ADA VE(MIMO_BF_ADA BfMimoAdaptivePar
VE PTIVE) PTIVE) Engineering Design aCfg
TM2, TM3, TM7, BfMimoAdaptivePar
TM8, TM4 TM3(TM3) TM3(TM3) Engineering Design aCfg
OFF, ON ON(On) ON(On) Engineering Design CqiAdaptiveCfg

ms2, ms5, ms10,
ms20, ms32, ms40,
ms64, ms80,
ms128, ms160 ms40(40ms) ms40(40ms) Engineering Design CqiAdaptiveCfg
OFF, ON ON(On) ON(On) Engineering Design CqiAdaptiveCfg
NO_ADAPTIVE,
OL_ADAPTIVE,
CL_ADAPTIVE, OL_ADAPTIVE(OL OL_ADAPTIVE(OL MimoAdaptivePara
OC_ADAPTIVE _ADAPTIVE) _ADAPTIVE) Engineering Design Cfg
TM2, TM3, TM4, MimoAdaptivePara
TM6 TM3(TM3) TM3(TM3) Engineering Design Cfg
ADAPTIVE(ADAPTI ADAPTIVE(ADAPTI MimoAdaptivePara
TM2, ADAPTIVE VE) VE) Engineering Design Cfg
OFF, ON ON(On) ON(On) Engineering Design SrsAdaptiveCfg
ms5, ms10, ms20,

ms40 ms40(40ms) ms40(40ms) Engineering Design SrsAdaptiveCfg
QCI1, QCI2, QCI3,
QCI4, QCI5, QCI6,
QCI7, QCI8, QCI9 None None Engineering Design TypDrbBsr
TPeriodBSRTimer_
sf5,
TPeriodBSRTimer_
sf10,
TPeriodBSRTimer_
sf16,
TPeriodBSRTimer_
sf20,
TPeriodBSRTimer_
sf32,
TPeriodBSRTimer_
sf40,
TPeriodBSRTimer_
sf64,
TPeriodBSRTimer_
sf80,
TPeriodBSRTimer_
sf128,
TPeriodBSRTimer_
sf160,
TPeriodBSRTimer_
sf320,
TPeriodBSRTimer_
sf640,
TPeriodBSRTimer_
sf1280,
TPeriodBSRTimer_
sf2560,
TPeriodBSRTimer_i TPeriodBSRTimer_ Default/Recommen
nfinity sf10(10 subframes) None ded Value TypDrbBsr
sf320, sf640,
sf1280, sf2560, Default/Recommen
sf5120, sf10240 sf320(sf320) None ded Value TypDrbBsr
GAP_PATTERN_T
YPE_1,
GAP_PATTERN_T GAP_PATTERN_T GAP_PATTERN_T Default/Recommen
YPE_2 YPE_1 YPE_1 ded Value HoMeasComm
FC0, FC1, FC2,
FC3, FC4, FC5,
FC6, FC7, FC8,
FC9, FC11, FC13, Default/Recommen
FC15, FC17, FC19 FC6 FC6 ded Value HoMeasComm
FC0, FC1, FC2,
FC3, FC4, FC5,
FC6, FC7, FC8,
FC0, FC1, FC2,
FC3, FC4, FC5,
FC6, FC7, FC8,
Default/Recommen
NOT_CFG, CFG NOT_CFG NOT_CFG ded Value HoMeasComm
Default/Recommen
-141~-43 -44 -44 ded Value HoMeasComm
Default/Recommen
NOT_CFG, CFG NOT_CFG NOT_CFG ded Value HoMeasComm
T_CRMAX_30S,
T_CRMAX_60S,
T_CRMAX_120S,
T_CRMAX_180S, T_CRMAX_60S(60 T_CRMAX_60S(60 Default/Recommen
T_CRMAX_240S s) s) ded Value HoMeasComm
T_CRMAXHYST_3
0S,
T_CRMAXHYST_6
0S,
T_CRMAXHYST_1
20S,
T_CRMAXHYST_1
80S,
T_CRMAXHYST_2 T_CRMAXHYST_6 T_CRMAXHYST_6 Default/Recommen
40S 0S(60s) 0S(60s) ded Value HoMeasComm
Default/Recommen
1~16 4 4 ded Value HoMeasComm
Default/Recommen
1~16 8 8 ded Value HoMeasComm
TTT_SF_MEDIUM_
0DOT25,
TTT_SF_MEDIUM_
0DOT50,
TTT_SF_MEDIUM_
0DOT75,
TTT_SF_MEDIUM_ TTT_SF_MEDIUM_ TTT_SF_MEDIUM_ Default/Recommen
LDOT0 LDOT0(1) LDOT0(1) ded Value HoMeasComm
TTT_SF_HIGH_0D
OT25,
TTT_SF_HIGH_0D
OT50,
TTT_SF_HIGH_0D
OT75,
TTT_SF_HIGH_LD TTT_SF_HIGH_0D TTT_SF_HIGH_0D Default/Recommen
OT0 OT75(0.75) OT75(0.75) ded Value HoMeasComm
FC0, FC1, FC2,
FC3, FC4, FC5,
FC6, FC7, FC8,
FC0, FC1, FC2,
FC3, FC4, FC5,
FC6, FC7, FC8,
Default/Recommen
1~8 4 4 ded Value InterRatHoComm
r1, r2, r4, r8, r16, Default/Recommen
r32, r64, Infinity Infinity(Infinity) infinity(Infinity) ded Value InterRatHoComm
120ms, 240ms,
480ms, 640ms,
1024ms, 2048ms,
5120ms, 10240ms,
1min, 6min, 12min, Default/Recommen
30min, 60min 480ms 480ms ded Value InterRatHoComm
RSCP, ECN0, Default/Recommen
BOTH RSCP RSCP ded Value InterRatHoComm
120ms, 240ms,
480ms, 640ms,
1024ms, 2048ms,
5120ms, 10240ms,
PILOT_STRENGTH
,
PILOT_PN_PHASE Default/Recommen
_AND_STRENGTH PILOT_STRENGTH PILOT_STRENGTH ded Value InterRatHoComm
120ms, 240ms,
480ms, 640ms,
1024ms, 2048ms,
5120ms, 10240ms,
Default/Recommen
PILOT_STRENGTH PILOT_STRENGTH PILOT_STRENGTH ded Value InterRatHoComm
120ms, 240ms,
480ms, 640ms,
1024ms, 2048ms,
5120ms, 10240ms,
1min, 6min, 12min,
30min, 60min 480ms 480ms Engineering Design InterRatHoComm
RSRP, RSRQ, Default/Recommen
BOTH RSRP RSRP ded Value InterRatHoComm
Default/Recommen
EventB1, EventB2 EventB1(EventB1) EventB1(EventB1) ded Value InterRatHoComm
Default/Recommen
Default/Recommen
BY_PRIORITY,
BY_SELECT_RATI Default/Recommen
O BY_PRIORITY BY_PRIORITY ded Value InterRatHoComm
BY_PRIORITY,
BY_SELECT_RATI Default/Recommen
O BY_PRIORITY BY_PRIORITY ded Value InterRatHoComm
NONE, Default/Recommen
REDIRECTION NONE NONE ded Value InterRatHoComm
Default/Recommen
PERIOD, EVENT EVENT EVENT ded Value InterRatHoComm
FIXED,
BY_MEAS_RESUL Default/Recommen
T FIXED FIXED ded Value InterRatHoComm
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
1~8 4 4 ded Value IntraRatHoComm

r32, r64, Infinity Infinity(Infinity) infinity(Infinity) ded Value IntraRatHoComm
Default/Recommen
RSRP, RSRQ RSRP RSRP ded Value IntraRatHoComm
SAME_AS_TRIG_ SAME_AS_TRIG_
SAME_AS_TRIG_ QUAN(Same as QUAN(Same as Default/Recommen
QUAN, BOTH Trig Quan) Trig Quan) ded Value IntraRatHoComm
120ms, 240ms,
480ms, 640ms,
1024ms, 2048ms,
5120ms, 10240ms,
30min, 60min 240ms 240ms ded Value IntraRatHoComm
QUAN, BOTH Trig Quan) Trig Quan) ded Value IntraRatHoComm
120ms, 240ms,
480ms, 640ms,
1024ms, 2048ms,
5120ms, 10240ms,
30min, 60min 240ms 240ms ded Value IntraRatHoComm
BOTH RSRP RSRP ded Value IntraRatHoComm

Radio Planning
0~17 None None (Internal planning) CSFallBackHo
0ms, 40ms, 64ms,

80ms, 100ms,
128ms, 160ms,
256ms, 320ms,
480ms, 512ms,
640ms, 1024ms,
1280ms, 2560ms, Radio Planning
5120ms 40ms 40ms (Internal planning) CSFallBackHo
0ms, 40ms, 64ms,
80ms, 100ms,
128ms, 160ms,
256ms, 320ms,
480ms, 512ms,
640ms, 1024ms,
0ms, 40ms, 64ms,
80ms, 100ms,
128ms, 160ms,
256ms, 320ms,
480ms, 512ms,
640ms, 1024ms,
Radio Planning
-120~-25 -106 -106 (Internal planning) CSFallBackHo
Radio Planning
-24~0, step:0.5 -13 -13 (Internal planning) CSFallBackHo
Radio Planning
-110~-48 -103 -103 (Internal planning) CSFallBackHo
Default/Recommen
-31.5~0, step:0.5 -34 -34 ded Value CSFallBackHo
Default/Recommen
-141~-43 -80 -80 ded Value CSFallBackHo
Radio Planning
1~10 4 4 (Internal planning) CSFallBackHo
Radio Planning
0~17 None None (Internal planning) CellAcBar
NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG configure) configure) Engineering Design CellAcBar
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE(
BOOLEAN_TRUE False) False) Engineering Design CellAcBar
P00, P05, P10,
P15, P20, P25,
P30, P40, P50,
P60, P70, P75, Default/Recommen
P80, P85, P90, P95 P95(95%) P95(95%) ded Value CellAcBar
ACCESS_BARRIN
G_TIME_S4,
ACCESS_BARRIN
G_TIME_S8,
ACCESS_BARRIN
G_TIME_S16,
ACCESS_BARRIN
G_TIME_S32,
ACCESS_BARRIN
G_TIME_S64,
ACCESS_BARRIN
G_TIME_S128,
ACCESS_BARRIN
G_TIME_S256,
ACCESS_BARRIN ACCESS_BARRIN ACCESS_BARRIN Default/Recommen
G_TIME_S512 G_TIME_S4(4s) G_TIME_S4(4s) ded Value CellAcBar
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen
BOOLEAN_TRUE False) False) ded Value CellAcBar


P00, P05, P10,
P15, P20, P25,
P30, P40, P50,
ACCESS_BARRIN
G_TIME_S4,
ACCESS_BARRIN
G_TIME_S8,
ACCESS_BARRIN
G_TIME_S16,
ACCESS_BARRIN
G_TIME_S32,
ACCESS_BARRIN
G_TIME_S64,
ACCESS_BARRIN
G_TIME_S128,
ACCESS_BARRIN
G_TIME_S256,


P00, P05, P10,
P15, P20, P25,
P30, P40, P50,
ACCESS_BARRIN
G_TIME_S4,
ACCESS_BARRIN
G_TIME_S8,
ACCESS_BARRIN
G_TIME_S16,
ACCESS_BARRIN
G_TIME_S32,
ACCESS_BARRIN
G_TIME_S64,
ACCESS_BARRIN
G_TIME_S128,
ACCESS_BARRIN
G_TIME_S256,
AC11BARSTATE:P AC11BARSTATE:P
ermit, ermit,
ermit, ermit,
AC11BARSTATE, ermit, ermit,
AC12BARSTATE, AC14BARSTATE:P AC14BARSTATE:P
AC14BARSTATE, AC15BARSTATE:P AC15BARSTATE:P Default/Recommen
AC15BARSTATE ermit ermit ded Value CellAcBar
P00, P05, P10,
P15, P20, P25,
P30, P40, P50,
ACCESS_BARRIN
G_TIME_S4,
ACCESS_BARRIN
G_TIME_S8,
ACCESS_BARRIN
G_TIME_S16,
ACCESS_BARRIN
G_TIME_S32,
ACCESS_BARRIN
G_TIME_S64,
ACCESS_BARRIN
G_TIME_S128,
ACCESS_BARRIN
G_TIME_S256,
ermit, ermit,
ermit, ermit,
AC12BARSTATE, AC14BARSTATE:P AC14BARSTATE:P
AC14BARSTATE, AC15BARSTATE:P AC15BARSTATE:P Default/Recommen
AC15BARSTATE ermit ermit ded Value CellAcBar
Radio Planning
0~17 None None (Internal planning) CellAccess
CELL_BARRED,
CELL_NOT_BARR CELL_NOT_BARR CELL_NOT_BARR Default/Recommen
ED ED(Not Barred) ED(Not Barred) ded Value CellAccess
CELL_RESERVED, CELL_NOT_RESE CELL_NOT_RESE
CELL_NOT_RESE RVED(Not RVED(Not Default/Recommen
RVED Reserved) Reserved) ded Value CellAccess
ALLOWED, Default/Recommen
NOT_ALLOWED ALLOWED ALLOWED ded Value CellAccess
NORMAL_MODE, NORMAL_MODE(N NORMAL_MODE(N Default/Recommen
RR_MODE ormal mode) ormal mode) ded Value CellAccess
Default/Recommen
1~720 1 1 ded Value CellAccess
2000-01-
01T00:00:00+00:00
~2099-12- 2000-01- Default/Recommen
31T23:59:59+00:00 01T00:00:00+00:00 None ded Value CellAccess
Radio Planning
0~17 None None (Internal planning) CellOp
Radio Planning
0~65535 None None (Internal planning) CellOp
CELL_RESERVED
_FOR_OP, CELL_NOT_RESE CELL_NOT_RESE
CELL_NOT_RESE RVED_FOR_OP(N RVED_FOR_OP(N Default/Recommen
RVED_FOR_OP ot Reserved) ot Reserved) ded Value CellOp
Default/Recommen
1~100 16 16 ded Value CellOp
Default/Recommen
1~100 16 16 ded Value CellOp
CELL_MME_CFG_
NUM_0,
CELL_MME_CFG_
NUM_1,
CELL_MME_CFG_
NUM_2,
CELL_MME_CFG_
NUM_3,
CELL_MME_CFG_ CELL_MME_CFG_ Radio Planning
NUM_4 NUM_0(0) None (Internal planning) CellOp
Radio Planning
0~65535 0 None (Internal planning) CellOp
Radio Planning
Radio Planning
Radio Planning
Radio Planning
Radio Planning
Radio Planning
Radio Planning
0~5 None None N/A CellOp
Radio Planning
0~17 None None (Internal planning) CellResel
DB0_Q_HYST,
DB1_Q_HYST,
DB2_Q_HYST,
DB3_Q_HYST,
DB4_Q_HYST,
DB5_Q_HYST,
DB6_Q_HYST,
DB8_Q_HYST,
DB10_Q_HYST,
DB12_Q_HYST,
DB14_Q_HYST,
DB16_Q_HYST,
DB18_Q_HYST,
DB20_Q_HYST,
DB22_Q_HYST, Default/Recommen
DB24_Q_HYST DB4_Q_HYST(4dB) DB4_Q_HYST(4dB) ded Value CellResel
NOT_CFG, CFG configure) configure) Engineering Design CellResel
S30_T_EVALULATI
ON,
S60_T_EVALULATI
ON,
S120_T_EVALULA
TION,
S180_T_EVALULA
TION,
S240_T_EVALULA S60_T_EVALULATI S60_T_EVALULATI Default/Recommen
TION ON(60s) ON(60s) ded Value CellResel
S30_T_HYST_NOR
MAL,
S60_T_HYST_NOR
MAL,
S120_T_HYST_NO
RMAL,
S180_T_HYST_NO
RMAL,
S240_T_HYST_NO S30_T_HYST_NOR S30_T_HYST_NOR Default/Recommen
RMAL MAL(30s) MAL(30s) ded Value CellResel
Default/Recommen
1~16 4 4 ded Value CellResel
Default/Recommen
DB_6_Q_HYST_SF
_MEDIUM,
DB_4_Q_HYST_SF
_MEDIUM,
DB_2_Q_HYST_SF
_MEDIUM,
DB0_Q_HYST_SF_ DB0_Q_HYST_SF_ DB0_Q_HYST_SF_ Default/Recommen
MEDIUM MEDIUM(0dB) MEDIUM(0dB) ded Value CellResel
DB_6_Q_HYST_SF
_HIGH,
DB_4_Q_HYST_SF
_HIGH,
DB_2_Q_HYST_SF
_HIGH,
DB0_Q_HYST_SF_ DB0_Q_HYST_SF_ DB0_Q_HYST_SF_ Default/Recommen
HIGH HIGH(0dB) HIGH(0dB) ded Value CellResel
NOT_CFG, CFG CFG(Configure) CFG(Configure) Engineering Design CellResel

Default/Recommen
0~62, step:2 10 10 ded Value CellResel
Default/Recommen
0~62, step:2 10 10 ded Value CellResel
Default/Recommen
Default/Recommen
-140~-44, step:2 -64 -64 ded Value CellResel
Default/Recommen
-30~33 23 23 ded Value CellResel
Default/Recommen
MBW6, MBW15,
MBW25, MBW50, Radio Planning
MBW75, MBW100 MBW6(1.4M) MBW6(1.4M) (Internal planning) CellResel
Default/Recommen

T_RESEL_SF_0DO
T25,
T_RESEL_SF_0DO
T5,
T_RESEL_SF_0DO
T75,
T_RESEL_SF_1DO T_RESEL_SF_1DO T_RESEL_SF_1DO Default/Recommen
T0 T0(1.0) T0(1.0) ded Value CellResel
T_RESEL_SF_0DO
T25,
T_RESEL_SF_0DO
T5,
T_RESEL_SF_0DO
T75,
T0 T75(0.75) T75(0.75) ded Value CellResel
BitString00,
BitString01,
BitString10, Default/Recommen
BitString11 BitString01(01) BitString01(01) ded Value CellResel

BOOLEAN_TRUE False) False) Engineering Design CellResel
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
-34~-3 -18 -18 ded Value CellResel
Radio Planning CellReselCdma200
0~17 None None (Internal planning) 0
NOT_CFG(Not NOT_CFG(Not CellReselCdma200

NOT_CFG, CFG configure) configure) Engineering Design 0
BOOLEAN_FALSE, BOOLEAN_TRUE( BOOLEAN_TRUE( CellReselCdma200

BOOLEAN_TRUE True) True) Engineering Design 0

CellReselCdma200
0~15 8 8 Engineering Design 0


CellReselCdma200

T_RESEL_SF_0DO
T25,
T_RESEL_SF_0DO
T5,
T_RESEL_SF_0DO
T75,
T_RESEL_SF_1DO T_RESEL_SF_0DO T_RESEL_SF_0DO Default/Recommen CellReselCdma200
T0 T75(0.75) T75(0.75) ded Value 0
T_RESEL_SF_0DO
T25,
T_RESEL_SF_0DO
T5,
T_RESEL_SF_0DO
T75,
T0 T0(1.0) T0(1.0) ded Value 0


CellReselCdma200

T_RESEL_SF_0DO
T25,
T_RESEL_SF_0DO
T5,
T_RESEL_SF_0DO
T75,
T0 T0(1.0) T0(1.0) ded Value 0
T_RESEL_SF_0DO
T25,
T_RESEL_SF_0DO
T5,
T_RESEL_SF_0DO
T75,
T0 T75(0.75) T75(0.75) ded Value 0
Radio Planning
0~17 None None (Internal planning) CellReselGeran
Default/Recommen
0~7 1 1 ded Value CellReselGeran
NOT_CFG, CFG configure) configure) Engineering Design CellReselGeran
T_RESEL_SF_0DO
T25,
T_RESEL_SF_0DO
T5,
T_RESEL_SF_0DO
T75,
T0 T0(1.0) T0(1.0) ded Value CellReselGeran
T_RESEL_SF_0DO
T25,
T_RESEL_SF_0DO
T5,
T_RESEL_SF_0DO
T75,
T0 T75(0.75) T75(0.75) ded Value CellReselGeran
Radio Planning
0~17 None None (Internal planning) CellReselUtran
Default/Recommen
0~7 1 1 ded Value CellReselUtran
NOT_CFG, CFG configure) configure) Engineering Design CellReselUtran
T_RESEL_SF_0DO
T25,
T_RESEL_SF_0DO
T5,
T_RESEL_SF_0DO
T75,
T0 T0(1.0) T0(1.0) ded Value CellReselUtran
T_RESEL_SF_0DO
T25,
T_RESEL_SF_0DO
T5,
T_RESEL_SF_0DO
T75,
T0 T75(0.75) T75(0.75) ded Value CellReselUtran
Radio Planning
0~17 None None (Internal planning) CellSel
Default/Recommen
-140~-44 -64 -64 ded Value CellSel
Default/Recommen
0~16 0 0 ded Value CellSel
Default/Recommen
-34~-3 -18 -18 ded Value CellSel
NOT_CFG(Not NOT_CFG(Not Default/Recommen

NOT_CFG, CFG configure) configure) ded Value CellSel
1~8 1 None Engineering Design CellSel
Radio Planning
0~17 None None (Internal planning) CellSiMap
BOOLEAN_FALSE, BOOLEAN_TRUE( BOOLEAN_TRUE(
BOOLEAN_TRUE True) True) Engineering Design CellSiMap
RF8, RF16, RF32,

RF64, RF128, RF16(16 radio RF16(16 radio Default/Recommen
RF256, RF512 frames) frames) ded Value CellSiMap
RF8, RF16, RF32,

RF8, RF16, RF32,
RF8, RF16, RF32,

RF8, RF16, RF32,

RF8, RF16, RF32,
RF8, RF16, RF32,

RF8, RF16, RF32,

RF8, RF16, RF32,
Default/Recommen
1~300 6 6 ded Value CellSiMap
Default/Recommen
MERGE, DISCARD DISCARD DISCARD ded Value CellSiMap
Default/Recommen
MERGE, DISCARD DISCARD DISCARD ded Value CellSiMap
RF8, RF16, RF32,

If the bandwidth is
1.4 MHz, set this
parameter to 83.
If the bandwidth is 3
MHz, 5 MHz, 10
MHz, 15 MHz, or 20
MHz, set this
parameter to 27.
In peak rate tests,
when four transmit
antennas and 20
MHz bandwidth are
configured, the
recommended
0.027~1, step:0.001 27 value is 54. Engineering Design CellSiMap
Radio Planning
0~17 None None (Internal planning) CellUlpcComm
AL0, AL04, AL05,

AL06, AL07, AL08, Default/Recommen
AL09, AL1 AL07(0.7) AL07(0.7) ded Value CellUlpcComm
Default/Recommen
-127~-96 -105 -105 ded Value CellUlpcComm
Default/Recommen
-126~24 -67 -67 ded Value CellUlpcComm
DELTAF_2,
DELTAF0, Default/Recommen
DELTAF2 DELTAF0(0dB) DELTAF0(0dB) ded Value CellUlpcComm
DELTAF1,
DELTAF_2,
DELTAF0,
DELTAF_2,
DELTAF_2,
Default/Recommen
-2~12, step:2 4 4 ded Value CellUlpcComm
Radio Planning eNBCellOpRsvdPar

0~17 None None (Internal planning) a
Radio Planning eNBCellOpRsvdPar

0~65535 None None (Internal planning) a
RsvdSwPara0_bit3 ReservedSwitchPar Default/Recommen eNBCellOpRsvdPar
2 ameter0_bit32:Off None ded Value a
2 ameter1_bit32:Off None ded Value a
2 ameter2_bit32:On None ded Value a
Default/Recommen eNBCellOpRsvdPar
0~4294967295 0 None ded Value a
Radio Planning
0~17 None None (Internal planning) eUCellSectorEqm
Radio Planning
0~65535 None None (Internal planning) eUCellSectorEqm
Radio Planning
-60~50,32767 32767 None (Internal planning) eUCellSectorEqm
Default/Recommen
0~23,255 255 None ded Value eUCellSectorEqm
0~62 None None N/A eUCellSectorEqm
0~214748364.7 None None N/A eUCellSectorEqm
Radio Planning
0~6 0 None (Internal planning) eUCellSectorEqm
Radio Planning EuSectorEqmGrou



0~23,255 255 None (Internal planning) p
Radio Planning
0~17 None None (Internal planning) IbdlInfo
0~1048575 None None N/A IbdlInfo

4~5,60~254 None None N/A IbdlInfo
DATA_LINK_AVAIL
ABLE,
DATA_LINK_UNAV
AILABLE None None N/A IbdlInfo
Radio Planning TimeAlignmentTime

0~17 None None (Internal planning) r
value of the
LongDrxCycle
parameter is
greater than or
equal to SF80, it is
recommended that
the
TimeAlignmentTime
r parameter be set
to SF10240. If the
TimingAdvCmdOpt
Switch parameter is
of the
TimeAlignmentTime
r parameter does
not affect the actual
value of the
LongDrxCycle
parameter. To avoid
a high probability of
becoming out-of-
synchronization in
the uplink for UEs
in DRX mode in this
scenario, it is
recommended that
the
TimeAlignmentTime
r parameter be
greater than or
equal to SF5120
and the
SF500, SF750, LongDrxCycle
SF1280, SF1920, parameter be
SF2560, SF5120, SF1920(1920 smaller than or Default/Recommen TimeAlignmentTime
SF10240, INFINITY subframes) equal to SF320. ded Value r
Default/Recommen TimeAlignmentTime
OFF, ON OFF(Off) OFF(Off) ded Value r
Radio Planning
0~17 None None (Internal planning) UeTimerConst
MS100_T300,
MS200_T300,
MS300_T300,
MS400_T300,
MS600_T300, FDD:MS200_T300(
MS1000_T300, 200ms)
MS1500_T300, MS200_T300(200m TDD:MS1000_T300 Default/Recommen
MS2000_T300 s) (1000ms) ded Value UeTimerConst
MS100_T301,
MS200_T301,
MS300_T301,
MS400_T301,
MS600_T301,
MS1000_T301,
MS1500_T301, MS200_T301(200m MS200_T301(200m Default/Recommen
MS2000_T301 s) s) ded Value UeTimerConst
MS0_T310,
MS50_T310,
MS100_T310,
MS200_T310,
MS500_T310,
MS1000_T310, MS1000_T310(100 MS1000_T310(100 Default/Recommen
MS2000_T310 0ms) 0ms) ded Value UeTimerConst
MS1000_T311,
MS3000_T311,
MS5000_T311,
MS10000_T311,
MS15000_T311,
MS20000_T311, MS10000_T311(10 MS10000_T311(10 Default/Recommen
MS30000_T311 000ms) 000ms) ded Value UeTimerConst
n1, n2, n3, n4, n5, Default/Recommen
n6, n8, n10 n1(1) n1(1) ded Value UeTimerConst
n1, n2, n3, n4, n6, Default/Recommen

n8, n10, n20 n10(10) n10(10) ded Value UeTimerConst
Radio Planning
0~17 None None (Internal planning) Cell
Radio Planning
1~99 characters None None (Internal planning) Cell

BOOLEAN_TRUE False) False) Engineering Design Cell
NORMAL_CP, NORMAL_CP(Nor NORMAL_CP(Nor Radio Planning
EXTENDED_CP mal) mal) (Internal planning) Cell
NORMAL_CP, NORMAL_CP(Nor NORMAL_CP(Nor Radio Planning
EXTENDED_CP mal) mal) (Internal planning) Cell
Radio Planning
1~43,60~64 None None (Internal planning) Cell
NOT_CFG, CFG configure) configure) ded Value Cell
18000~45589,5443 Radio Planning

6~65535 18000 None (Internal planning) Cell
0~45589,54436~65 Radio Planning

535 None None (Internal planning) Cell
CELL_BW_N6,
CELL_BW_N15,
CELL_BW_N25,
CELL_BW_N50,
CELL_BW_N75, Radio Planning
CELL_BW_N100 None None (Internal planning) Cell
CELL_BW_N6,
CELL_BW_N15,
CELL_BW_N25,
CELL_BW_N50,
CELL_BW_N75, Radio Planning
CELL_BW_N100 None None (Internal planning) Cell
Radio Planning
Radio Planning
Default/Recommen
1~32 1 1 ded Value Cell
CELL_DEACTIVE, CELL_DEACTIVE( CELL_DEACTIVE( Default/Recommen
CELL_ACTIVE Deactivated) Deactivated) ded Value Cell
CELL_UNBLOCK,
CELL_HIGH_BLOC
K,
CELL_MIDDLE_BL
OCK,
CELL_LOW_BLOC CELL_UNBLOCK(U CELL_UNBLOCK(U
K nblock) nblock) Engineering Design Cell
Default/Recommen
1~1440 60 60 ded Value Cell
CELL_FDD, Radio Planning
CELL_TDD None None (Internal planning) Cell
SA0, SA1, SA2,
SA3, SA4, SA5, Radio Planning
SA6 SA0(SA0) None (Internal planning) Cell
SSP0, SSP1,
SSP2, SSP3,
SSP4, SSP5, Radio Planning
SSP6, SSP7, SSP8 SSP0(SSP0) None (Internal planning) Cell
dB-24, dB-22, dB-
20, dB-18, dB-16,
dB-14, dB-12, dB-
10, dB-8, dB-6, dB-
5, dB-4, dB-3, dB-2,
dB-1, dB0, dB1,
dB2, dB3, dB4,
dB5, dB6, dB8,
dB10, dB12, dB14,
dB16, dB18, dB20,
dB22, dB24 dB0(0dB) dB0(0dB) Engineering Design Cell
dB-24, dB-22, dB-
20, dB-18, dB-16,
dB-14, dB-12, dB-
10, dB-8, dB-6, dB-
5, dB-4, dB-3, dB-2,
dB-1, dB0, dB1,
dB2, dB3, dB4,
dB5, dB6, dB8,
dB10, dB12, dB14,
dB16, dB18, dB20,
dB22, dB24 dB0(0dB) dB0(0dB) Engineering Design Cell
physical random
access channel
(PRACH), they
must have different
values of this
parameter.
2. If a cell uses a
preamble format
less than 4 and
provides coverage
for a highway or an
ultra-high-speed
railway, this
parameter must be
set by referring to
constraints in the
parameter
relationship.
Note: When
manually
configuring root ZC
sequences, ensure
that both the first
logical root
sequence and each
subsequent logical
root sequence are
within the specified
value range. For
details about how to
calculate the
number of ZC root
sequences required
to generate 64
preamble
sequences, see Radio Planning
0~837 None 3GPP TS 36.211. (Internal planning) Cell
LOW_SPEED,
HIGH_SPEED,
ULTRA_HIGH_SPE
ED,
EXTRA_HIGH_SPE LOW_SPEED(Low LOW_SPEED(Low
ED speed cell flag) speed cell flag) Engineering Design Cell
Cell radius <= 1400
m(4593
ft):Preamble
formats 0 to 3 are
applicable to an
FDD cell, preamble
formats 0 to 4 are
applicable to a TDD
cell;
1400 m(4593 ft) <
Cell radius <=
14,500 m(47,572
ft):Preamble
formats 0 to 3 are
applicable;
14,500 m(47,572 ft)
< Cell radius <=
29,500 m(96,784
ft):Preamble
formats 1 to 3 are
applicable;
29,500 m(96,784 ft)
< Cell radius <=
77,300 m(253,606
ft):Preamble
formats 1 and 3 are
applicable;
77,300 m(253,606
ft) < Cell radius <=
100,000 m(328,080
ft):Preamble format Default/Recommen
0~4 0 3 is applicable. ded Value Cell
system);3~328080(i system);32808(imp system);32808(imp Radio Planning
mperial system) erial system) erial system) (Internal planning) Cell
NOT_CFG(Not NOT_CFG(Not Radio Planning
NOT_CFG, CFG configure) configure) (Internal planning) Cell
4.8~5.0,9.6~10.0,1 Radio Planning
4.6~15.0,18.3~20.0 98 98 (Internal planning) Cell
4.8~5.0,9.6~10.0,1 Radio Planning
4.6~15.0,18.3~20.0 98 98 (Internal planning) Cell

Radio Planning

Default/Recommen
-30~36 23 23 ded Value Cell
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Radio Planning
BOOLEAN_TRUE False) False) (Internal planning) Cell
SFN,
CELL_COMBINATI
ON,
TWO_RRU_COMBI
NATION,
DIGITAL_COMBINA
TION,
MPRU_AGGREGA Radio Planning
TION SFN(SFN) SFN(SFN) (Internal planning) Cell
NO_COMPRESSIO
N,
NORMAL_COMPR NO_COMPRESSIO NO_COMPRESSIO Radio Planning
ESSION N(No Compression) N(No Compression) (Internal planning) Cell
Radio Planning
BOOLEAN_FALSE, BOOLEAN_FALSE( Default/Recommen
BOOLEAN_TRUE False) None ded Value Cell
CRS_PORT_1,
CRS_PORT_2, CRS_PORT_2(2 Radio Planning
CRS_PORT_4 ports) None (Internal planning) Cell
1T1R, 1T2R, 2T2R, Radio Planning
2T4R, 4T4R, 8T8R None None (Internal planning) Cell
Radio Planning
UL_DL(Uplink and UL_DL(Uplink and Radio Planning
UL_DL, DL_ONLY downlink) downlink) (Internal planning) Cell
Radio Planning
ACTIVE, STANDBY ACTIVE(Active) None (Internal planning) Cell
CELL_INST_UNIN
STALL,
CELL_INST_UEM_
CFGING,
CELL_INST_RRU_
CFGING,
CELL_INST_BBI_C
FGING,
CELL_INST_RECF
GING,
CELL_INST_DELE
TING,
CELL_INST_NORM
AL,
CELL_INST_BARR
ED,
CELL_INST_ALLO
CATING_RES,
CELL_INST_CRM_
CFGING,
CELL_INST_SFN_
RECFGING,
CELL_INST_RRU_
DPD_TRAINING None None N/A Cell
0~4294967295 None None N/A Cell
0~32 characters None None N/A Cell

CELL_NO_OP,
CELL_SETUP_ACT
,
CELL_SETUP_UBL
,
CELL_SETUP_HE
ALCHK,
CELL_SETUP_141,
CELL_SETUP_UL
WIDESCAN,
CELL_DEL_BLK_L
OW,
CELL_DEL_BLK_M
ID,
CELL_DEL_BLK_H
IGH,
CELL_DEL_NOUS
ER,
CELL_DEL_DEA,
CELL_DEL_RMV,
CELl_DEL_HEALC
HK,
CELL_DEL_UNHE
AL,
CELL_DEL_SETUP
_FAIL,
CELL_DEL_141_D
EL,
CELL_DEL_ULWID
ESCAN,
CELL_DEL_CELLN
OACCESSALM None None N/A Cell

CELL_NO_OP,
CELL_SETUP_ACT
,
CELL_SETUP_UBL
,
CELL_SETUP_HE
ALCHK,
CELL_SETUP_141,
CELL_SETUP_UL
WIDESCAN,
CELL_DEL_BLK_L
OW,
CELL_DEL_BLK_M
ID,
CELL_DEL_BLK_H
IGH,
CELL_DEL_NOUS
ER,
CELL_DEL_DEA,
CELL_DEL_RMV,
CELl_DEL_HEALC
HK,
CELL_DEL_UNHE
AL,
CELL_DEL_SETUP
_FAIL,
CELL_DEL_141_D
EL,
CELL_DEL_ULWID
ESCAN,
CELL_DEL_CELLN
OACCESSALM None None N/A Cell
CELL_PWRSAVE_
UNINSTALL,
CELL_PWRSAVE_
RFSHD,
CELL_PWRSAVE_
CARRIERPWROFF
,
CELL_PWRSAVE_
LOWPWR_CELLU
SEDPWRRDU,
CELL_PWRSAVE_
LOWPWR_RSPWR
RDU,
CELL_PWRSAVE_
LOWPWR_RFSHD,
CELL_PWRSAVE_
LOWPWR_CELLS
HD,
AUTO_PWROFF_R
FSLEEP,
CELL_PWRSAVE_
UMTS_CARRIERP
WROFF,
CELL_PWRSAVE_
DYNADJVOLT None None N/A Cell

BASIC_TYPE,
TWO_RRU_COMBI
NATION_TYPE,
SFN_TYPE,
BF_TYPE,
CELL_COMBINATI
ON_TYPE,
DIGITAL_COMBINA
TION_TYPE,
MPRU_AGGREGA
TION_TYPE,
INVALID_TYPE None None N/A Cell
UNINSTALL,
SYMBOL_SHUTDO
WN None None N/A Cell
0~6553.5 None None N/A Cell

NORMAL,
LINK_ABNOMAL,
CFGPARA_INVALI
D,
RFUNIT_ABNOMA
L,
LICENSE_NOT_EN
OUGH,
CLK_NOT_USABL
E,
BASEBANDUNIT_
ABNORMAL,
DATALINK_ABNOR
MAL,
RFUNIT_PROCES
SING,
UL_DATA_SYNC_L
OSS,
UNAVAILABLE None None N/A Cell

Radio Planning
Radio Planning
Radio Planning
0~65535 None None (Internal planning) SfnAuxResBind
Radio Planning
Radio Planning
Default/Recommen
0~23,255 255 None ded Value SfnAuxResBind
Radio Planning
-60~50,32767 32767 None (Internal planning) SfnAuxResBind
Radio Planning
0~6 0 None (Internal planning) SfnAuxResBind
Radio Planning
0~17 None None (Internal planning) SfnCellBind
Radio Planning
0~1048575 None None (Internal planning) SfnCellBind
Radio Planning
0~17 None None (Internal planning) CellBf
SINGLE_LAYER_B
F, SINGLE_LAYER_B SINGLE_LAYER_B
DUAL_LAYER_BF F(Single-Layer BF) F(Single-Layer BF) Engineering Design CellBf
SUCCESS,
FAILURE, NA NA(NA) None N/A CellBf
SUCCESS,
SUCCESS,
SUCCESS,
SUCCESS,
SUCCESS,
SUCCESS,
SUCCESS,
SUCCESS,
SUCCESS,
0~32 characters None None N/A CellBf

INITIALIZATION,
PERIOD, NA NA(NA) None N/A CellBf
INITIALIZATION,
INITIALIZATION,
INITIALIZATION,
INITIALIZATION,
INITIALIZATION,
INITIALIZATION,
INITIALIZATION,
INITIALIZATION,
INITIALIZATION,
Radio Planning
0~17 None None (Internal planning) CellDLIcicMcPara
120ms, 240ms,
480ms, 640ms,
1024ms, 2048ms,
5120ms, 10240ms,
30min, 60min 5120ms 5120ms ded Value CellDLIcicMcPara
Default/Recommen
1~8 8 8 ded Value CellDLIcicMcPara
r32, r64, Infinity Infinity(Infinity) Infinity(Infinity) ded Value CellDLIcicMcPara
QUAN, BOTH Trig Quan) Trig Quan) ded Value CellDLIcicMcPara
Default/Recommen
RSRP, RSRQ RSRP RSRP ded Value CellDLIcicMcPara
Default/Recommen
0~15, step:0.5 4 4 ded Value CellDLIcicMcPara
0ms, 40ms, 64ms,

80ms, 100ms,
128ms, 160ms,
256ms, 320ms,
480ms, 512ms,
640ms, 1024ms,
5120ms 640ms 640ms ded Value CellDLIcicMcPara
Default/Recommen
-15~15, step:0.5 -13 -13 ded Value CellDLIcicMcPara
Default/Recommen
-15~15, step:0.5 -13 -13 ded Value CellDLIcicMcPara
Radio Planning
0~17 None None (Internal planning) CellEicic
SUBFRAME_ONE_
PER_FIVE,
SUBFRAME_TWO
_PER_FIVE,
SUBFRAME_THRE
E_PER_FIVE, SUBFRAME_ONE_ SUBFRAME_ONE_
SUBFRAME_FOUR PER_FIVE(One PER_FIVE(One
_PER_FIVE ABS per 5 ms) ABS per 5 ms) Engineering Design CellEicic
Radio Planning
0~17 None None (Internal planning) CellLowPower
OFF, ON OFF(Off) OFF(Off) Engineering Design CellLowPower

Default/Recommen
OFF, ON OFF(Off) OFF(Off) ded Value CellLowPower
Default/Recommen
00:00:00~23:59:59 0:00:00 0:00:00 ded Value CellLowPower
Default/Recommen
00:00:00~23:59:59 6:00:00 6:00:00 ded Value CellLowPower
Default/Recommen
0~1440 120 120 ded Value CellLowPower
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
-10~0 -1 -1 ded Value CellLowPower
Default/Recommen
CUSTOMIZED,
POLICY1,
POLICY2, CUSTOMIZED(Cus CUSTOMIZED(Cus Default/Recommen
POLICY3 tomized) tomized) ded Value CellLowPower
Radio Planning
0~17 None None (Internal planning) CellMro
NOT_CFG, CFG configure) configure) Engineering Design CellMro
dB-24, dB-22, dB-
20, dB-18, dB-16,
dB-14, dB-12, dB-
10, dB-8, dB-6, dB-
5, dB-4, dB-3, dB-2,
dB-1, dB0, dB1,
dB2, dB3, dB4,
dB5, dB6, dB8,
dB10, dB12, dB14,
dB16, dB18, dB20,
dB22, dB24 dB24(24dB) dB24(24dB) Engineering Design CellMro
dB-24, dB-22, dB-
20, dB-18, dB-16,
dB-14, dB-12, dB-
10, dB-8, dB-6, dB-
5, dB-4, dB-3, dB-2,
dB-1, dB0, dB1,
dB2, dB3, dB4,
dB5, dB6, dB8,
dB10, dB12, dB14,
dB16, dB18, dB20,
dB22, dB24 dB-24(-24dB) dB-24(-24dB) Engineering Design CellMro
Radio Planning
0~17 None None (Internal planning) CellRacThd
1~15 5 5 Engineering Design CellRacThd





described as
follows:
FDD:
For a cell with a 1.4
MHz bandwidth, a
value in the range
of 0 to 560 is
recommended;
For a cell with a 3
MHz bandwidth, a
value in the range
of 0 to 1800 is
recommended;
For a cell with a 5
MHz bandwidth, a
value in the range
of 0 to 3000 is
recommended;
For a cell with a 10
MHz bandwidth, a
value in the range
of 0 to 3000 is
recommended;
MHz bandwidth, a
value in the range
of 0 to 6000 is
recommended;
MHz bandwidth, a
value in the range
of 0 to 6000 is
recommended;
TDD: For a TDD
cell, a value in the
range of 0 to 6000
0~9000 3000 is recommended. Engineering Design CellRacThd
Radio Planning
0~17 None None (Internal planning) CellRfShutdown
OFF, ON OFF(Off) OFF(Off) Engineering Design CellRfShutdown

Default/Recommen
00:00:00~23:59:59 0:00:00 0:00:00 ded Value CellRfShutdown
Default/Recommen
00:00:00~23:59:59 6:00:00 6:00:00 ded Value CellRfShutdown
0~7 3 3 Engineering Design CellRfShutdown

UE_CONNECTED_
MOD,
LOAD_SIMULATIO
N_ENABLED,
LCS_ENABLED,
RF_INTELLIGENT_
SHUTDOWN,
DELAY_FOR_30MI
NUTES,
WRONG_REQ_FO
R_PA_CCE,
WRONG_ANTENN
AS_NUM,
POWER_INFSUFFI
CIENT,
SWITCH_OFF,
OTHERS,
MBSFN_ENABLED None None N/A CellRfShutdown
SWITCH_TURN_O
FF,
TIME_EXPIRES,
UE_ACCESSING,
POWER_INSUFFIC
IENT,
INITIAL_ENTERIN
G,
LOAD_SIMULATIO
N_ENABLE,
LCS_ENABLED,
OTHERS,
MBSFN_ENABLED None None N/A CellRfShutdown
Radio Planning
0~17 None None (Internal planning) CellRicAlgo
The value OFF is

recommended if
there is no remote
interference to the
cell.
The value ON is
recommended if
there is remote
interference to the
OFF, ON OFF(Off) cell. Engineering Design CellRicAlgo
The value 0 is
recommended if
there is no remote
interference to the
cell.
The value 1 is
recommended if
there is remote
interference to the
0~2 0 cell. Engineering Design CellRicAlgo
Radio Planning
OFF, ON OFF(Off) OFF(Off) (Internal planning) CellRicAlgo
Radio Planning
0~17 None None (Internal planning) CellServiceDiffCfg
CellConStaReportS CellConStaReportS
CellConStaReportS witch:Off, witch:Off,
witch, FPIGTPUSwitch:Off FPIGTPUSwitch:Off
FPIGTPUSwitch, , ,
DSCPRemarkSwitc DSCPRemarkSwitc DSCPRemarkSwitc
h h:Off h:Off Engineering Design CellServiceDiffCfg
0~1, step:0.01 10 10 Engineering Design CellServiceDiffCfg


Radio Planning
0~17 None None (Internal planning) CellShutdown
OFF, ON OFF(Off) OFF(Off) Engineering Design CellShutdown

Default/Recommen
00:00:00~23:59:59 0:00:00 0:00:00 ded Value CellShutdown
Default/Recommen
00:00:00~23:59:59 6:00:00 6:00:00 ded Value CellShutdown
Default/Recommen
0~100 20 20 ded Value CellShutdown
Default/Recommen
Default/Recommen
Default/Recommen
Radio Planning
0~17 None None (Internal planning) CellULIcicMcPara
120ms, 240ms,
480ms, 640ms,
1024ms, 2048ms,
5120ms, 10240ms,
30min, 60min 5120ms 5120ms ded Value CellULIcicMcPara
Default/Recommen
1~8 8 8 ded Value CellULIcicMcPara
r32, r64, Infinity Infinity(Infinity) Infinity(Infinity) ded Value CellULIcicMcPara
QUAN, BOTH Trig Quan) Trig Quan) ded Value CellULIcicMcPara
Default/Recommen
RSRP, RSRQ RSRP RSRP ded Value CellULIcicMcPara
Default/Recommen
0~15, step:0.5 4 4 ded Value CellULIcicMcPara
0ms, 40ms, 64ms,
80ms, 100ms,
128ms, 160ms,
256ms, 320ms,
480ms, 512ms,
640ms, 1024ms,
5120ms 640ms 640ms ded Value CellULIcicMcPara
Default/Recommen
-15~15, step:0.5 -10 -10 ded Value CellULIcicMcPara
Radio Planning
0~17 None None (Internal planning) CellUlschAlgo
Scenario A: The
EPF policy is
recommended on
live networks.
Scenario B: The
MAX C/I policy is
recommended
when the operator
or Huawei desires
to verify the system
performance in
maximum
capacities.
Scenario C: The PF
policy is
recommended
when the operator
or Huawei desires
to verify the system
performance in
scenarios where
the capacity,
coverage, and
fairness reach a
tradeoff.
Scenario D: The RR
ULSCH_STRATEG policy is
Y_EPF, recommended
ULSCH_STRATEG when the operator
Y_MAX_CI, or Huawei desires
ULSCH_STRATEG to verify that each
Y_PF, UE has an equal
ULSCH_STRATEG ULSCH_STRATEG opportunity to be Default/Recommen
Y_RR Y_EPF(EPF) scheduled. ded Value CellUlschAlgo
ADAPTIVE_HARQ_
SW_ON,
ADAPTIVE_HARQ_
SW_OFF, ADAPTIVE_HARQ_ ADAPTIVE_HARQ_
ADAPTIVE_HARQ_ SW_SEMI_ON(Se SW_SEMI_ON(Se
SW_SEMI_ON miOn) miOn) Engineering Design CellUlschAlgo
step:0.01 10 10 ded Value CellUlschAlgo
In cells with the

bandwidth of 1.4
MHz, it is
recommended that
this parameter be
set to 50 for
preallocation UEs
within each TTI. In
cells with other
bandwidths, the
recommended Default/Recommen
0~100 25 value is 25. ded Value CellUlschAlgo
Default/Recommen
1~40 5 5 ded Value CellUlschAlgo
Default/Recommen
HOPPING_OFF,
HOPPING_TYPE1,
HOPPING_TYPE2,
HOPPING_TYPE2_ HOPPING_OFF(Ho HOPPING_OFF(Ho Default/Recommen
RANDOM pping off) pping off) ded Value CellUlschAlgo
Default/Recommen
Default/Recommen
Scenario A: The
recommended
value is 3 if the cell
serves a large
number of cell
center users
(CCUs).
Scenario B: The
recommended
value is 2 in
commercial Default/Recommen
2~3 2 networks. ded Value CellUlschAlgo
Default/Recommen
EPF_CAPC_FACT
OR_1,
EPF_CAPC_FACT
OR_0DOT01,
EPF_CAPC_FACT
OR_0DOT5,
EPF_CAPC_FACT
OR_2,
EPF_CAPC_FACT
OR_3,
EPF_CAPC_FACT EPF_CAPC_FACT EPF_CAPC_FACT Default/Recommen
OR_4 OR_1(1) OR_1(1) ded Value CellUlschAlgo
FS_NONFS_ADAP FS_INRANDOM_A
TIVE, FS_NONFS_ADAP DAPTIVE(Fs
FS_INRANDOM_A TIVE(Fs nonFs InRandom
DAPTIVE Strategy) Strategy) Engineering Design CellUlschAlgo
Radio Planning
0~17 None None (Internal planning) eNBCellRsvdPara
RsvdSwPara0_bit3 ReservedSwitchPar Default/Recommen
2 ameter0_bit32:Off None ded Value eNBCellRsvdPara
2 ameter1_bit32:Off None ded Value eNBCellRsvdPara
2 ameter2_bit32:On None ded Value eNBCellRsvdPara
Default/Recommen
0~4294967295 0 None ded Value eNBCellRsvdPara
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Radio Planning InterRatCellShutdo

0~17 None None (Internal planning) wn
InterRatCellShutdo
OFF, ON OFF(Off) OFF(Off) Engineering Design wn
Default/Recommen InterRatCellShutdo
00:00:00~23:59:59 3:00:00 3:00:00 ded Value wn
00:00:00~23:59:59 5:00:00 5:00:00 ded Value wn
0~5000 20 20 ded Value wn
Radio Planning
0~17 None None (Internal planning) CellAlgoSwitch
RachAdjSwitch:Off, RachAdjSwitch:Off,
RachAdjSwitch, HoRaSwitch:On, HoRaSwitch:On,
HoRaSwitch, UnsyncRaSwitch:O UnsyncRaSwitch:O
UnsyncRaSwitch, n, n,
MaksIdxSwitch, MaksIdxSwitch:Off, MaksIdxSwitch:Off,
BackOffSwitch BackOffSwitch:Off BackOffSwitch:Off Engineering Design CellAlgoSwitch
SrsSubframeRecfS SrsSubframeRecfS SrsSubframeRecfS
witch witch:On witch:On Engineering Design CellAlgoSwitch
PucchSwitch:
In ultra-high-speed
scenarios, the
recommended
value is Off.
In other scenarios,
the recommended
value is On.
PucchFlexCfgSwitc
h:
If PUCCHs
experience
interference, the
recommended
value is On.
If PUCCHs do not
experience
PucchSwitch, PucchSwitch:On, interference, the
PucchFlexCfgSwitc PucchFlexCfgSwitc recommended
h h:Off value is Off. Engineering Design CellAlgoSwitch
AqmAlgoSwitch AqmAlgoSwitch:Off AqmAlgoSwitch:Off Engineering Design CellAlgoSwitch
CqiAdjAlgoSwitch:O CqiAdjAlgoSwitch:O
CqiAdjAlgoSwitch, n, n,
StepVarySwitch, StepVarySwitch:Off, StepVarySwitch:Off,
DlVarIBLERtargetS DlVarIBLERtargetS DlVarIBLERtargetS
witch, witch:Off, witch:Off,
TddBundlingCqiAdj TddBundlingCqiAdj TddBundlingCqiAdj
OptSwitch, OptSwitch:Off, OptSwitch:Off,
TddMultiplexingCqi TddMultiplexingCqi TddMultiplexingCqi
AdjOptSwitch AdjOptSwitch:Off AdjOptSwitch:Off Engineering Design CellAlgoSwitch
OFF, ON OFF(Off) OFF(Off) Engineering Design CellAlgoSwitch

Dynamic Adjust Dynamic Adjust
DynAdjVoltSwitch Voltage Switch:Off Voltage Switch:Off Engineering Design CellAlgoSwitch
dlCacSwitch:Off, dlCacSwitch:Off,
ulCacSwitch:Off, ulCacSwitch:Off,
dlCacPredictSwitch: dlCacPredictSwitch:
Off, Off,
ulCacPredictSwitch: ulCacPredictSwitch:
Off, Off,
DlSwitch, UlSwitch, GbrUsedPRbCheck GbrUsedPRbCheck
DlPredictSwitch, Switch:Off, Switch:Off,
UlPredictSwitch, dlLdcSwitch:Off, dlLdcSwitch:Off,
GbrUsageSwitch, ulLdcSwitch:Off, ulLdcSwitch:Off,
DlLdcSwitch, LdcDrbRelSwitch:O LdcDrbRelSwitch:O
UlLdcSwitch, ff, ff,
RelDrbSwitch, PreemptionSwitch: PreemptionSwitch:
PreemptionSwitch Off Off Engineering Design CellAlgoSwitch
threshold) and
there is an
imbalance in the
load between cells
(that is, the load
difference between
cells exceeds the
related threshold).
It is recommended
that
MlbLoadInfoSwitch,
GeranMlbSwitch,
and
CdmaMlbSwitch all
be set to Off when
the cell load is light
in an early stage of
network
deployment (that is,
the average cell
IntraFreqMlbSwitch: load is lower than
Off, 70%).
InterFreqMlbSwitch: It is recommended
Off, that
UtranMlbSwitch:Off, UtranMlbSwitch,
GeranMlbSwitch:Off UtranIdleMlbSwitch,
IntraFreqMlbSwitch, , MlbLoadInfoSwitch,
InterFreqMlbSwitch, CdmaMlbSwitch:Off GeranMlbSwitch,
UtranMlbSwitch, , and
GeranMlbSwitch, IntraFreqIdleMlbSwi CdmaMlbSwitch all
CdmaMlbSwitch, tch:Off, be set to On when
IntraFreqIdleMlbSwi UtranIdleMlbSwitch: the cell load is
tch, Off, heavy (for example,
UtranIdleMlbSwitch, MlbLoadInfoSwitch: the average cell
MlbLoadInfoSwitch, Off, load exceeds the
InterFreqBlindMlbS InterFreqBlindMlbS inter-RAT load
witch witch:Off sharing threshold). Engineering Design CellAlgoSwitch
PdschSpsPcSwitch:
Off,
PhichInnerLoopPcS
witch:Off,
PdcchPcSwitch:On,
EDlMaxTXPwrSwitc
h:Turning on the
switch is suggested
for system using
single-carrier and
single-mode RRU,
PdschSpsPcSwitch: and turning off the
PdschSpsPcSwitch, Off, switch for system
PhichInnerLoopPcS PhichInnerLoopPcS using multi-mode
witch, witch:Off, RRU or multi-carrier
PdcchPcSwitch, PdcchPcSwitch:On, RRU for risk of
EDlMaxTXPwrSwitc EDlMaxTXPwrSwitc impact on system
h h:Off performance. Engineering Design CellAlgoSwitch
CloseLoopSpsSwitc CloseLoopSpsSwitc CloseLoopSpsSwitc
h, h:Off, h:Off,
InnerLoopPuschSwi InnerLoopPuschSwi InnerLoopPuschSwi
tch, tch:On, tch:On,
PhSinrTarUpdateS PhSinrTarUpdateS PhSinrTarUpdateS
InnerLoopPucchSwi InnerLoopPucchSwi InnerLoopPucchSwi
tch, tch:On, tch:On,
OiSinrTarUpdateSw OiSinrTarUpdateSw OiSinrTarUpdateSw
itch, itch:Off, itch:Off,
PowerSavingSwitch PowerSavingSwitch PowerSavingSwitch
, :Off, :Off,
CloseLoopOptPUS CloseLoopOptPUS CloseLoopOptPUS
CHSwitch CHSwitch:Off CHSwitch:Off Engineering Design CellAlgoSwitch
BfSwitch BfSwitch:Off BfSwitch:Off Engineering Design CellAlgoSwitch

FreqSelSwitch:Off, FreqSelSwitch:Off,
FreqSelSwitch, ServiceDiffSwitch:O ServiceDiffSwitch:O
ServiceDiffSwitch, ff, ff,
SpsSchSwitch, SpsSchSwitch:Off, SpsSchSwitch:Off,
MBSFNShutDownS MBSFNShutDownS MBSFNShutDownS
NonGbrBundlingSw NonGbrBundlingSw NonGbrBundlingSw
EnAperiodicCqiRpt EnAperiodicCqiRpt EnAperiodicCqiRpt
Switch Switch:Off Switch:Off Engineering Design CellAlgoSwitch
SpsSchSwitch:Off,
SinrAdjustSwitch:O SpsSchSwitch:Off,
n, SinrAdjustSwitch:O
PreAllocationSwitch n,
SpsSchSwitch, :On, PreAllocationSwitch
SinrAdjustSwitch, UlVmimoSwitch:Off, :On,
PreAllocationSwitch TtiBundlingSwitch: UlVmimoSwitch:Off,
, UlVmimoSwitch, Off, ImIcSwitch:Off, TtiBundlingSwitch:
TtiBundlingSwitch, SmartPreAllocation Off, ImIcSwitch:Off,
ImIcSwitch, Switch:Off, SmartPreAllocation
SmartPreAllocation PuschDtxSwitch:Off Switch:Off,
Switch, , PuschDtxSwitch:Off
PuschDtxSwitch, UlIblerAdjustSwitch: ,
UlIblerAdjustSwitch, Off, UlIblerAdjustSwitch:
UlEnhancedFssSwit UlEnhancedFssSwit Off,UlEnhancedFss
ch, ch:Off, Switch:Off,
UlEnhancedSrSchS UlEnhancedSrSchS UlEnhancedSrSchS
SchedulerCtrlPower SchedulerCtrlPower SchedulerCtrlPower
Default/Recommen
OFF, ON OFF(Off) OFF(Off) ded Value CellAlgoSwitch
FreqPriorIFHOSwitc FreqPriorIFHOSwitc FreqPriorIFHOSwitc
h, h:Off, h:Off,
FreqPriorIFBlindHO FreqPriorIFBlindHO FreqPriorIFBlindHO Default/Recommen
Switch Switch:On Switch:On ded Value CellAlgoSwitch
Default/Recommen
MuBfSwitch MuBfSwitch:Off MuBfSwitch:Off ded Value CellAlgoSwitch
Default/Recommen
OFF, ON OFF(Off) OFF(Off) ded Value CellAlgoSwitch
ACBAR_SWITCH_
DYNAMIC,
ACBAR_SWITCH_
STATIC, ACBAR_SWITCH_ ACBAR_SWITCH_
ACBAR_SWITCH_ STATIC(static STATIC(static
DISABLE configuration) configuration) Engineering Design CellAlgoSwitch
DISABLE, ENABLE DISABLE(Disable) DISABLE(Disable) Engineering Design CellAlgoSwitch
DISABLE, ENABLE ENABLE(Enable) ENABLE(Enable) Engineering Design CellAlgoSwitch
JOINT(Joint ADAPTIVE(Adaptiv
ADAPTIVE, JOINT scheduling) e scheduling) Engineering Design CellAlgoSwitch
JOINT(Joint ADAPTIVE(Adaptiv
ADAPTIVE, JOINT scheduling) e scheduling) Engineering Design CellAlgoSwitch
PucchIrcSwitch, PucchIrcSwitch:Off, PucchIrcSwitch:Off,
PrachIrcSwitch PrachIrcSwitch:Off PrachIrcSwitch:Off Engineering Design CellAlgoSwitch
DynDrxSwitch DynDrxSwitch:Off DynDrxSwitch:Off Engineering Design CellAlgoSwitch

DISABLE, ENABLE DISABLE(Disable) DISABLE(Disable) Engineering Design CellAlgoSwitch
AvoidGeranInterfSw AvoidGeranInterfSw AvoidGeranInterfSw

itch itch:Off itch:Off Engineering Design CellAlgoSwitch

DlCompSwitch DlCompSwitch:Off DlCompSwitch:Off Engineering Design CellAlgoSwitch
MumimoPuschPsic MumimoPuschPsic MuMimoPuschPsic

InterFreqMlbBlindH InterFreqMlbBlindH
InterFreqMlbBlindH o:Off, o:Off,
o, InterRatMlbBlindHo: InterRatMlbBlindHo:
InterRatMlbBlindHo Off Off Engineering Design CellAlgoSwitch
Radio Planning
0~17 None None (Internal planning) CellDlIcic
not set to
INVALID(Invalid DL
band division
scheme), it is
recommended that
this parameter be
set to a different
value from those of
it is impossible for
neighboring cells to
use mutually
different band
modes, it is
recommended that
this parameter be
set to the same
value as that of a
neighboring cell
that has the
INVALID(Invalid DL weakest
MODE1, MODE2, band division interference with
MODE3, INVALID scheme) the current cell. Engineering Design CellDlIcic
Radio Planning
-5~15 1 1dB (Internal planning) CellDlIcic
Radio Planning
-140~-43 38 38 (Internal planning) CellDlIcic
Radio Planning
0~17 None None (Internal planning) CellDlpcPdcch
DediDciPwrOffset
to -60.
When PaPcOff is
set to -4.77, you are
advised to set
DediDciPwrOffset
to -48.
When PaPcOff is
set to -3, you are
advised to set
DediDciPwrOffset
to -30.
When PaPcOff is
advised to set
DediDciPwrOffset
to -18.
When PaPcOff is
set to 0, you are
advised to set
DediDciPwrOffset
to 0.
When PaPcOff is
set to 1, you are
advised to set
DediDciPwrOffset
to 10.
When PaPcOff is
set to 2, you are
advised to set
DediDciPwrOffset
to 20.
When PaPcOff is
set to 3, you are
advised to set
DediDciPwrOffset Default/Recommen
-15~15, step:0.1 -30 to 30. ded Value CellDlpcPdcch
Radio Planning
0~17 None None (Internal planning) CellDlpcPdsch
When PaPcOff is
set to -6, you are
not advised to
enable the ICIC
function.
When PaPcOff is
advised to set
CcuPa to -6 dB.
When PaPcOff is
set to -3, you are
advised to set
CcuPa to -6 dB.
When PaPcOff is
advised to set
CcuPa to -4.77 dB.
When PaPcOff is
set to 0, you are
advised to set
CcuPa to -3 dB.
When PaPcOff is
set to 1, you are
advised to set
CcuPa to -1.77 dB.
When PaPcOff is
set to 2, you are
PA_NEG6, advised to set
PA_NEG4DOT77, CcuPa to 0 dB.
PA_NEG3, When PaPcOff is
PA_NEG1DOT77, set to 3, you are not
PA_0, PA_1, PA_2, advised to enable Default/Recommen
PA_3 PA_NEG6(-6dB) the ICIC function. ded Value CellDlpcPdsch
When PaPcOff is
set to -6, you are
not advised to
enable the ICIC
function.
When PaPcOff is
advised to set
CeuPa to -3 dB.
When PaPcOff is
set to -3, you are
advised to set
CeuPa to -1.77 dB.
When PaPcOff is
advised to set
CeuPa to 0 dB.
When PaPcOff is
set to 0, you are
advised to set
CeuPa to 1 dB.
When PaPcOff is
set to 1, you are
advised to set
CeuPa to 2 dB.
When PaPcOff is
set to 2, you are
PA_NEG6, advised to set
PA_NEG4DOT77, CeuPa to 3 dB.
PA_NEG3, When PaPcOff is
PA_NEG1DOT77, set to 3, you are not
PA_0, PA_1, PA_2, PA_NEG1DOT77(- advised to enable Default/Recommen
PA_3 1.77dB) the ICIC function. ded Value CellDlpcPdsch
Radio Planning
0~17 None None (Internal planning) CellDlpcPhich
parameter is
recommended to be
the same as the
setting of PaPcOff
plus 3 dB.
When PaPcOff is
set to -6, you are
advised to set
PwrOffset to -30.
When PaPcOff is
advised to set
PwrOffset to -18.
When PaPcOff is
set to -3, you are
advised to set
PwrOffset to 0.
When PaPcOff is
advised to set
PwrOffset to 12.
When PaPcOff is
set to 0, you are
advised to set
PwrOffset to 30.
When PaPcOff is
set to 1, you are
advised to set
PwrOffset to 40.
When PaPcOff is
set to 2, you are
advised to set
PwrOffset to 50.
When PaPcOff is
set to 3, you are
advised to set Default/Recommen
-15~15, step:0.1 0 PwrOffset to 60. ded Value CellDlpcPhich
Radio Planning
0~17 None None (Internal planning) CellDlschAlgo
DLSCH_PRI_TYPE
_EPF,
DLSCH_PRI_TYPE
_PF,
DLSCH_PRI_TYPE
_MAX_CI,
DLSCH_PRI_TYPE DLSCH_PRI_TYPE DLSCH_PRI_TYPE Default/Recommen
_RR _EPF(EPF) _EPF(EPF) ded Value CellDlschAlgo
Default/Recommen
0~100 0 0 ded Value CellDlschAlgo
Default/Recommen
0~1, step:0.01 1 1 ded Value CellDlschAlgo
Default/Recommen
0~1, step:0.01 10 10 ded Value CellDlschAlgo
If MIMO is not used

for a cell, the value
SW_MAX_SM_RA
NK_1(Rank1) is
recommended. If
2x2 MIMO is used
for a 2T2R or 2T4R
cell or 4x2 MIMO is
used for a 4T4R
cell, the value
SW_MAX_SM_RA
NK_2(Rank2) is
recommended. If
SW_MAX_SM_RA 4x4 MIMO is used
NK_1, for a 4T4R cell, the
SW_MAX_SM_RA value
NK_2, SW_MAX_SM_RA
SW_MAX_SM_RA SW_MAX_SM_RA NK_4(Rank4) is Default/Recommen
NK_4 NK_2(Rank2) recommended. ded Value CellDlschAlgo
BASIC_SCHEDUL
E, BASIC_SCHEDUL BASIC_SCHEDUL Default/Recommen
DIFF_SCHEDULE E(Basic Schedule) E(Basic Schedule) ded Value CellDlschAlgo
Default/Recommen
EPF_CAPC_FACT
OR_1,
EPF_CAPC_FACT
OR_0DOT01,
EPF_CAPC_FACT
OR_0DOT5,
EPF_CAPC_FACT
OR_2,
EPF_CAPC_FACT
OR_3,
EPF_CAPC_FACT EPF_CAPC_FACT EPF_CAPC_FACT Default/Recommen
OR_4 OR_1(1) OR_1(1) ded Value CellDlschAlgo
Default/Recommen
ALL_EDGE_USER,
PART_EDGE_USE ALL_EDGE_USER( ALL_EDGE_USER( Default/Recommen
R All Edge User) All Edge User) ded Value CellDlschAlgo
EDGE_USER_NO_
PRIO, EDGE_USER_NO_ EDGE_USER_NO_
EDGE_USER_PRI PRIO(Edge User PRIO(Edge User Default/Recommen
O No Prio) No Prio) ded Value CellDlschAlgo
ROUND_DOWN, ROUND_DOWN(R ROUND_DOWN(R Default/Recommen
ROUND_UP ound Down) ound Down) ded Value CellDlschAlgo
Radio Planning
0~17 None None (Internal planning) CellMLB
1~100 60 60 Engineering Design CellMLB
LOAD_EXCHANGE
_PERIOD_1S,
LOAD_EXCHANGE
_PERIOD_2S,
LOAD_EXCHANGE
_PERIOD_5S,
LOAD_EXCHANGE LOAD_EXCHANGE LOAD_EXCHANGE Default/Recommen
_PERIOD_10S _PERIOD_5S(5s) _PERIOD_5S(5s) ded Value CellMLB
Default/Recommen
0~50 8 8 ded Value CellMLB
Default/Recommen

Default/Recommen
PRB_ONLY,
UE_NUMBER_ONL
Y,
PRB_OR_UE_NUM PRB_ONLY(PrbMo PRB_ONLY(PrbMo
BER de) de) Engineering Design CellMLB
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
OFF, ON OFF(Off) OFF(Off) ded Value CellMLB
Radio Planning
0~17 None None (Internal planning) CellPdcchAlgo
CONGREG_LV4,
CONGREG_LV8 CONGREG_LV4 CONGREG_LV4 Engineering Design CellPdcchAlgo
OFF, ON ON(On) ON(On) Engineering Design CellPdcchAlgo

MHz and 3 MHz,
and the
recommended
value for the
bandwidths larger
than 5 MHz is 1. If
the switch for
dynamic adjustment
on the number of
OFDM symbols
occupied by the
PDCCH is turned
off, set this
parameter to 4 for
the bandwidth of
1.4 MHz and to 3
for other
bandwidths. In
addition, if this
switch is turned off
for a small-
bandwidth cell,
PDCCH resources
may be insufficient
due to the smaller
number of occupied
OFDM symbols,
and accordingly
UEs cannot access
the cell. In this
scenario, set this
parameter to 3 for
the bandwidth of
1.4 MHz and to 2
for the bandwidths
of 3 MHz, 5 MHz,
1~4 1 and 10 MHz. Engineering Design CellPdcchAlgo
0~100 0 0 Engineering Design CellPdcchAlgo
In non-ultra-high-
speed scenarios,
the recommended
value is ON for an
FDD eNodeB. In
scenarios where
downlink frequency
selective
scheduling is
enabled, the
recommended
value is
ECFIADAPTIONON
. In other scenarios,
OFF, ON, the recommended
ECfiAdaptionON ON(On) value is OFF. Engineering Design CellPdcchAlgo
uses four physical
antenna ports and
is 50 when the
eNodeB uses two
physical antenna
ports;
(9) If the cell
bandwidth and the
number of PDCCH
symbols are 20
MHz and 3,
respectively, the
lower limit is 32
when the eNodeB
uses four physical
antenna ports and
is 28 when the
eNodeB uses two
physical antenna
ports;
If multi-user MIMO
(MU-MIMO) and
multi-user
beamforming
(MUBF) are
enabled, you are
advised not to apply
restrictions on the
CCE usage within
each TTI. The
purpose is to
ensure successful
CCE assignment for
paired UEs and
maintain the MU-
MIMO and MUBF
1~100 100 performance. Engineering Design CellPdcchAlgo
OFF, ON ON(On) ON(On) Engineering Design CellPdcchAlgo

OFF, ON OFF(Off) OFF(Off) Engineering Design CellPdcchAlgo
AVERAGE,
MINUS_3DB_FIXE
D,
MINUS_6DB_FIXE AVERAGE(AVERA AVERAGE(AVERA
D GE) GE) Engineering Design CellPdcchAlgo
Radio Planning
0~17 None None (Internal planning) CellPucchAlgo
value is 0 for all
bandwidths.
If a competition test
on the access delay
or handover delay
is to be conducted
with UL
preallocation
disabled, set this
parameter to a
value greater than
1.
It is recommended
that the default
value of the
parameter be
retained. If
adjustments are
mandatory, avoid
setting this
parameter to an
excessively large
value as it may lead
to incorrect
decisions on the
load status of SRI
resources.
A value smaller
than or equal to 20
is recommended if
the cell bandwidth
is below 10 MHz. A
value smaller than
or equal to 40 is
recommended if
another cell Default/Recommen
0~50 10 bandwidth is used. ded Value CellPucchAlgo
Radio Planning CellNoAccessAlmP

0~17 None None (Internal planning) ara
Default/Recommen CellNoAccessAlmP
00:00:00~23:59:59 0:00:00 0:00:00 ded Value ara
00:00:00~23:59:59 0:00:00 0:00:00 ded Value ara
0~72 0 0 ded Value ara
Radio Planning
0~17 None None (Internal planning) CellUlIcic
not set to
INVALID(Invalid UL
band division
scheme), it is
recommended that
this parameter be
set to different
values in
it is impossible for
neighboring cells to
use mutually
different band
modes, it is
recommended that
this parameter be
set to the same
value in
neighboring cells
that has the
INVALID(Invalid UL weakest
MODE1, MODE2, band division interference to each
MODE3, INVALID scheme) other. Engineering Design CellUlIcic
Radio Planning
0~17 None None (Internal planning) GeranInterfCfg
Set this parameter

based on the
number of RBs that
are used both in
GERAN cells and
2~20 1 LTE cells. Engineering Design GeranInterfCfg
-6~12 -3 -3 Engineering Design GeranInterfCfg
Radio Planning
0~17 None None (Internal planning) CellSimuLoad
Default/Recommen
0~9 4 4 ded Value CellSimuLoad
TM1, TM2, TM7, Default/Recommen
TM8 TM2(TM2) TM2(TM2) ded Value CellSimuLoad
0~100 None None N/A CellSimuLoad
0~42949672.95 None None N/A CellSimuLoad
0~42949672.95 None None N/A CellSimuLoad

Radio Planning
0~17 None None (Internal planning) BcchCfg
MOD_PERIOD_CO
EFF_N2,
MOD_PERIOD_CO
EFF_N4,
MOD_PERIOD_CO
EFF_N8,
MOD_PERIOD_CO MOD_PERIOD_CO MOD_PERIOD_CO Default/Recommen
EFF_N16 EFF_N2(2) EFF_N2(2) ded Value BcchCfg
Radio Planning
0~17 None None (Internal planning) CellChPwrCfg
advised to set
PcfichPwr to -600.
When PaPcOff is
advised to set
PcfichPwr to -354.
When PaPcOff is
set to -3, you are
advised to set
PcfichPwr to 0.
When PaPcOff is
advised to set
PcfichPwr to 246.
When PaPcOff is
set to 0, you are
advised to set
PcfichPwr to 600.
When PaPcOff is
set to 1, you are
advised to set
PcfichPwr to 800.
When PaPcOff is
set to 2, you are
advised to set
PcfichPwr to 1000.
When PaPcOff is
set to 3, you are
advised to set
PcfichPwr to 1200.
If the call bandwidth
is 1.4, 3, or 5 MHz,
you are advised to
set PcfichPwr to the
value of PaPcOff,
which is same as Default/Recommen
-15.875~15.875 -600 that in LTE FDD. ded Value CellChPwrCfg
recommended to be
the same as the
setting of PaPcOff.
PbchPwr can be set
as follows:
When PaPcOff is
set to -6, you are
advised to set
PbchPwr to -1200.
When PaPcOff is
advised to set
PbchPwr to -954.
When PaPcOff is
set to -3, you are
advised to set
PbchPwr to -600.
When PaPcOff is
advised to set
PbchPwr to -354.
When PaPcOff is
set to 0, you are
advised to set
PbchPwr to 0.
When PaPcOff is
set to 1, you are
advised to set
PbchPwr to 200.
When PaPcOff is
set to 2, you are
advised to set
PbchPwr to 400.
When PaPcOff is
set to 3, you are
-15.875~15.875 -600 PbchPwr to 600. ded Value CellChPwrCfg
bandwidths, you
are advised to set
this parameter to
the value of
PaPcOff.
When PaPcOff is
set to -6, you are
advised to set
SchPwr to -1200.
When PaPcOff is
advised to set
SchPwr to -954.
When PaPcOff is
set to -3, you are
advised to set
SchPwr to -600.
When PaPcOff is
advised to set
SchPwr to -354.
When PaPcOff is
set to 0, you are
advised to set
SchPwr to 0.
When PaPcOff is
set to 1, you are
advised to set
SchPwr to 200.
When PaPcOff is
set to 2, you are
advised to set
SchPwr to 400.
When PaPcOff is
set to 3, you are
-15.875~15.875 0 SchPwr to 600. ded Value CellChPwrCfg
recommended to be
the same as the
setting of PaPcOff.
DbchPwr can be
set as follows:
When PaPcOff is
set to -6, you are
advised to set
DbchPwr to -1200.
When PaPcOff is
advised to set
DbchPwr to -954.
When PaPcOff is
set to -3, you are
advised to set
DbchPwr to -600.
When PaPcOff is
advised to set
DbchPwr to -354.
When PaPcOff is
set to 0, you are
advised to set
DbchPwr to 0.
When PaPcOff is
set to 1, you are
advised to set
DbchPwr to 200.
When PaPcOff is
set to 2, you are
advised to set
DbchPwr to 400.
When PaPcOff is
set to 3, you are
-15.875~15.875 -600 DbchPwr to 600. ded Value CellChPwrCfg
bandwidths, you
are advised to set
this parameter to
the value of
PaPcOff.
When PaPcOff is
set to -6, you are
advised to set
PchPwr to -1200.
When PaPcOff is
advised to set
PchPwr to -954.
When PaPcOff is
set to -3, you are
advised to set
PchPwr to -600.
When PaPcOff is
advised to set
PchPwr to -354.
When PaPcOff is
set to 0, you are
advised to set
PchPwr to 0.
When PaPcOff is
set to 1, you are
advised to set
PchPwr to 200.
When PaPcOff is
set to 2, you are
advised to set
PchPwr to 400.
When PaPcOff is
set to 3, you are
-15.875~15.875 0 PchPwr to 600. ded Value CellChPwrCfg
are advised to set
this parameter to
the value of
PaPcOff.
When PaPcOff is
set to -6, you are
advised to set
RaRspPwr to
-1200.
When PaPcOff is
advised to set
RaRspPwr to -954.
When PaPcOff is
set to -3, you are
advised to set
RaRspPwr to -600.
When PaPcOff is
advised to set
RaRspPwr to -354.
When PaPcOff is
set to 0, you are
advised to set
RaRspPwr to 0.
When PaPcOff is
set to 1, you are
advised to set
RaRspPwr to 200.
When PaPcOff is
set to 2, you are
advised to set
RaRspPwr to 400.
When PaPcOff is
set to 3, you are
-15.875~15.875 0 RaRspPwr to 600. ded Value CellChPwrCfg
bandwidths, you
are advised to set
this parameter to
the value of
PaPcOff.
When PaPcOff is
set to -6, you are
advised to set
PrsPwr to -1200.
When PaPcOff is
advised to set
PrsPwr to -954.
When PaPcOff is
set to -3, you are
advised to set
PrsPwr to -600.
When PaPcOff is
advised to set
PrsPwr to -354.
When PaPcOff is
set to 0, you are
advised to set
PrsPwr to 0.
When PaPcOff is
set to 1, you are
advised to set
PrsPwr to 200.
When PaPcOff is
set to 2, you are
advised to set
PrsPwr to 400.
When PaPcOff is
set to 3, you are
-15.875~15.875 0 PrsPwr to 600. ded Value CellChPwrCfg
Radio Planning
0~17 None None (Internal planning) PDSCHCfg
Default/Recommen
-60~50 182 None ded Value PDSCHCfg
Single-antenna: 0; Default/Recommen
0~3 1 double-antenna: 1 ded Value PDSCHCfg
Default/Recommen
0~6 0 None ded Value PDSCHCfg
Radio Planning
0~17 None None (Internal planning) RACHCfg
DB0_PWR_RAMPI
NG_STEP,
DB2_PWR_RAMPI
NG_STEP,
DB4_PWR_RAMPI
NG_STEP,
DB6_PWR_RAMPI DB2_PWR_RAMPI DB2_PWR_RAMPI Default/Recommen
NG_STEP NG_STEP(2dB) NG_STEP(2dB) ded Value RACHCfg
DBM_120,
DBM_118,
DBM_116,
DBM_114,
DBM_112,
DBM_110,
DBM_108,
DBM_106,
DBM_104,
DBM_102,
DBM_100,
DBM_98, DBM_96,
DBM_94, DBM_92, DBM_104(- DBM_104(- Default/Recommen
DBM_90 104dBm) 104dBm) ded Value RACHCfg
B56_MSG_SIZE_G
ROUPA,
B144_MSG_SIZE_
GROUPA,
B208_MSG_SIZE_
GROUPA,
B256_MSG_SIZE_ B56_MSG_SIZE_G B56_MSG_SIZE_G Default/Recommen
GROUPA ROUPA(56bits) ROUPA(56bits) ded Value RACHCfg
0~94 6 6 Engineering Design RACHCfg

NOT_CFG, CFG configure) configure) ded Value RACHCfg
25.
subframe
assignment of 1,
this parameter can
the range of 20 to
25.
If a cell is
configured with the
speed flag other
than LOW_SPEED,
preamble format of
2:
subframe
assignment of 0,
this parameter can
the range of 30 to
34.
subframe
assignment of 1,
this parameter can
the range of 30 to
34.
If a cell is
configured with the
speed flag other
than LOW_SPEED,
preamble format of
3:
subframe
assignment of 0,
this parameter can
the range of 40 to
0~63 3 44. Engineering Design RACHCfg
N3_PREMB_TRAN
S_MAX,
N4_PREMB_TRAN
S_MAX,
N5_PREMB_TRAN
S_MAX,
N6_PREMB_TRAN
S_MAX,
N7_PREMB_TRAN
S_MAX,
N8_PREMB_TRAN
S_MAX,
N10_PREMB_TRA
NS_MAX,
N20_PREMB_TRA
NS_MAX,
N50_PREMB_TRA
NS_MAX,
N100_PREMB_TR
ANS_MAX,
N200_PREMB_TR N10_PREMB_TRA N10_PREMB_TRA Default/Recommen
ANS_MAX NS_MAX(10times) NS_MAX(10times) ded Value RACHCfg
SF40_MAC_RESO
LUTION_TIMER,
SF48_MAC_RESO
LUTION_TIMER,
SF56_MAC_RESO
LUTION_TIMER, SF64_MAC_RESO SF64_MAC_RESO
SF64_MAC_RESO LUTION_TIMER(64 LUTION_TIMER(64 Default/Recommen
LUTION_TIMER ) ) ded Value RACHCfg
Default/Recommen
1~8 5 5 ded Value RACHCfg
Radio Planning
0~17 None None (Internal planning) SRSCfg
The value SC3(3) is
SC0, SC1, SC2, recommended for
SC3, SC4, SC5, FDD cells.
SC6, SC7, SC8, The value SC0(0) is
SC9, SC10, SC11, recommended for
SC12, SC13, SC14 SC3(3) TDD cells. Engineering Design SRSCfg
BOOLEAN_FALSE, BOOLEAN_TRUE( BOOLEAN_TRUE( Default/Recommen
BOOLEAN_TRUE True) True) ded Value SRSCfg
It is recommended
that this parameter
be set to TRUE if
any of the following
conditions is met:
(1) The
MimoAdaptiveSwitc
h parameter is set
to OC_ADAPTIVE;
(2) UlVmimoSwitch
under the
UlSchSwitch
parameter is turned
on; (3) The WM
parameter in the
BOOLEAN_FALSE, BOOLEAN_TRUE( BBP MO is set to Default/Recommen
BOOLEAN_TRUE True) TDD_ENHANCE. ded Value SRSCfg
ACCESS_FIRST,
EXPERIENCE_FIR
ST,
EXPERIENCE_EN ACCESS_FIRST(A ACCESS_FIRST(A
HANCED ccess First) ccess First) Engineering Design SRSCfg
BW0, BW1, BW2,

BW3, BW4, BW5,
BW6, BW7,
INVALID_BANDWI
DTH None None N/A SRSCfg
Radio Planning
0~17 None None (Internal planning) PHICHCfg
NORMAL, Default/Recommen
EXTENDED NORMAL NORMAL ded Value PHICHCfg
ONE_SIXTH, HALF, Default/Recommen

ONE, TWO ONE ONE ded Value PHICHCfg
Radio Planning
0~17 None None (Internal planning) PCCHCfg
rf32, rf64, rf128, rf128(128 radio rf128(128 radio Default/Recommen
rf256 frames) frames) ded Value PCCHCfg
FOURT, TWOT,
ONET, HALFT,
QUARTERT,
ONE_EIGHTT,
ONE_SIXTEENTHT
,
ONE_THIRTY_SEC Default/Recommen
ONDT ONET ONET ded Value PCCHCfg
Default/Recommen
1~3 1 1 ded Value PCCHCfg
Radio Planning
0~17 None None (Internal planning) PUSCHCfg
INTER_SUB_FRA
ME, respectively,
the recommended
value of this
parameter is 4.
If UlHoppingType
and HoppingMode
are set to
HOPPING_TYPE2
and
INTRA_AND_INTE
R_SUB_FRAME,
respectively, the
recommended
value of this
parameter is 1.
If UlHoppingType
and HoppingMode
are set to
HOPPING_TYPE2_
RANDOM and
INTER_SUB_FRA
ME, respectively,
the recommended
value of this
parameter is 4.
If UlHoppingType
and HoppingMode
are set to
HOPPING_TYPE2_
RANDOM and
INTRA_AND_INTE
R_SUB_FRAME,
respectively, the
recommended
value of this Default/Recommen
1~4 4 parameter is 4. ded Value PUSCHCfg
INTER_SUB_FRA
ME,
INTRA_AND_INTE INTER_SUB_FRA INTER_SUB_FRA Default/Recommen
R_SUB_FRAME ME(Inter) ME(Inter) ded Value PUSCHCfg
subframe
configuration of
SA5 and with the
extended CP
length, if DeltaShift
is set to
DS2_DELTA_SHIFT
, the recommended
values of this
parameter are 0, 0,
6, 12, 16, and 20,
corresponding to
cell bandwidths in
ascending order;if
DeltaShift is set to
DS3_DELTA_SHIFT
, the recommended
values of this
parameter are 0, 0,
8, 17, 22, and 26,
corresponding to
cell bandwidths in
ascending order.
The value 0
indicates that this
parameter is not
supported by cells
with specific
bandwidths,
whereas the values
DS1_DELTA_SHIF
T and
DS2_DELTA_SHIF
T are not supported
by cells with the
extended CP Default/Recommen
0~98 22 length. ded Value PUSCHCfg
BOOLEAN_TRUE False) False) Engineering Design PUSCHCfg
0~29 0 0 Engineering Design PUSCHCfg
BOOLEAN_TRUE False) False) Engineering Design PUSCHCfg
Default/Recommen
0~7 0 0 ded Value PUSCHCfg
BOOLEAN_FALSE, BOOLEAN_TRUE( BOOLEAN_TRUE(
BOOLEAN_TRUE True) True) Engineering Design PUSCHCfg
Radio Planning
0~17 None None (Internal planning) PUCCHCfg
Set this parameter

to
DS2_DELTA_SHIF
T for a cell
configured with the
LBBPc and the
normal cyclic prefix
(CP).
Set this parameter
to
DS3_DELTA_SHIF
T for a cell
configured with the
LBBPc and the
extended CP.
Set this parameter
to
DS1_DELTA_SHIF
T for a cell
configured with the
LBBPd and the
normal CP.
Set this parameter
DS1_DELTA_SHIFT to
, DS3_DELTA_SHIF
DS2_DELTA_SHIFT T for a cell
, configured with the
DS3_DELTA_SHIF DS1_DELTA_SHIF LBBPd and the Default/Recommen
T T(ds1) extended CP. ded Value PUCCHCfg
0~1000 6 6 Engineering Design PUCCHCfg

Radio Planning Cdma20001XrttPre

0~17 None None (Internal planning) Reg

00~99,000~999 None None (Internal planning) Reg


Cdma20001XrttPre
0~8 characters None None Engineering Design Reg
NOT_CFG(Not NOT_CFG(Not Radio Planning Cdma20001XrttPre

NOT_CFG, CFG configure) configure) (Internal planning) Reg
bc0, bc1, bc2, bc3,
bc4, bc5, bc6, bc7,
bc8, bc9, bc10,
bc11, bc12, bc13,
bc14, bc15, bc16,
bc17, bc18, bc19, Default/Recommen Cdma20001XrttPre
bc20, bc21 bc3 bc3 ded Value Reg
NOT_CFG(Not NOT_CFG(Not Default/Recommen Cdma20001XrttPre

NOT_CFG, CFG configure) configure) ded Value Reg
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen Cdma20001XrttPre

BOOLEAN_TRUE False) False) ded Value Reg



0~127 0 0 (Internal planning) Reg



Default/Recommen Cdma20001XrttPre
0~63 0 0 ded Value Reg




NO, YES YES(YES) YES(YES) ded Value Reg


IMSIS_ESN, IMSI, IMSI_ESN(IMSI IMSI_ESN(IMSI Default/Recommen Cdma20001XrttPre

IMSI_ESN and ESN) and ESN) ded Value Reg


NO, YES NO(NO) NO(No) ded Value Reg

0~31.875, Default/Recommen Cdma20001XrttPre

step:0.125 40 40 ded Value Reg








Radio Planning Cdma2000HrpdNC

0~17 None None (Internal planning) ell
3~28 characters None None (Internal planning) ell
3~8 characters None None (Internal planning) ell
bc0, bc1, bc2, bc3,

bc4, bc5, bc6, bc7,
bc8, bc9, bc10,
bc11, bc12, bc13,
bc14, bc15, bc16,
bc17, bc18, bc19, Radio Planning Cdma2000HrpdNC
bc20, bc21 None None (Internal planning) ell
PERMIT_HO_ENU
M,
FORBID_HO_ENU PERMIT_HO_ENU PERMIT_HO_ENU Radio Planning Cdma2000HrpdNC
M M(Permit Ho) M(Permit Ho) (Internal planning) ell
PERMIT_RMV_EN
UM, PERMIT_RMV_EN PERMIT_RMV_EN
FORBID_RMV_EN UM(Permit ANR UM(Permit ANR Radio Planning Cdma2000HrpdNC
UM Remove) Remove) (Internal planning) ell
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Cdma2000HrpdNC

BOOLEAN_TRUE False) False) Engineering Design ell
Cdma2000HrpdNC
0~99 characters NULL(empty string) None Engineering Design ell
Cdma2000HrpdNC
AUTO_MODE, AUTO_MODE(Auto AUTO_MODE(Auto Radio Planning Cdma2000HrpdNC
MANUAL_MODE Mode) Mode) (Internal planning) ell
Radio Planning Cdma2000HrpdPre


00~99,000~999 None None (Internal planning) Reg
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen Cdma2000HrpdPre
NOT_CFG(Not NOT_CFG(Not Default/Recommen Cdma2000HrpdPre

BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen Cdma2000HrpdPre



0~255 0 None (Internal planning) Reg

0~255 0 None (Internal planning) Reg
Radio Planning Cdma2000HrpdRef


Radio Planning
0~17 None None (Internal planning) Cdma2000Nfreq
bc0, bc1, bc2, bc3,

bc4, bc5, bc6, bc7,
bc8, bc9, bc10,
bc11, bc12, bc13,
bc14, bc15, bc16,
bc17, bc18, bc19, Radio Planning
bc20, bc21 None None (Internal planning) Cdma2000Nfreq
Radio Planning
0~2047 None None (Internal planning) Cdma2000Nfreq
-15~15 0 0 Engineering Design Cdma2000Nfreq
NOT_CFG, CFG configure) configure) Engineering Design Cdma2000Nfreq
0~15 8 8 Engineering Design Cdma2000Nfreq
0~32 0 0 Engineering Design Cdma2000Nfreq

Radio Planning EutranExternalCell
000~999 None None (Internal planning) Plmn

00~99,000~999 None None (Internal planning) Plmn


00~99,000~999 None None (Internal planning) Plmn
Radio Planning GeranExternalCellP

0~65535 None None (Internal planning) lmn

1~65533,65535 None None (Internal planning) lmn

00~99,000~999 None None (Internal planning) lmn


00~99,000~999 None None (Internal planning) lmn
Radio Planning UtranExternalCellPl
000~999 None None (Internal planning) mn

00~99,000~999 None None (Internal planning) mn


00~99,000~999 None None (Internal planning) mn
Radio Planning Cdma2000HrpdExt

bc0, bc1, bc2, bc3,

bc4, bc5, bc6, bc7,
bc8, bc9, bc10,
bc11, bc12, bc13,
bc14, bc15, bc16,
bc17, bc18, bc19, Radio Planning Cdma2000HrpdExt
bc20, bc21 None None (Internal planning) Cell


Cdma2000HrpdExt
0~99 characters NULL(empty string) None Engineering Design Cell
AUTO_MODE, AUTO_MODE(Auto AUTO_MODE(Auto Radio Planning Cdma2000HrpdExt
MANUAL_MODE Mode) Mode) (Internal planning) Cell
Radio Planning Cdma20001XrttExt

bc0, bc1, bc2, bc3,

bc4, bc5, bc6, bc7,
bc8, bc9, bc10,
bc11, bc12, bc13,
bc14, bc15, bc16,
bc17, bc18, bc19, Radio Planning Cdma20001XrttExt
bc20, bc21 None None (Internal planning) Cell




0~8 characters NULL(empty string) None (Internal planning) Cell

0~99 characters NULL(empty string) None (Internal planning) Cell
AUTO_MODE, AUTO_MODE(Auto AUTO_MODE(Auto Radio Planning Cdma20001XrttExt

MANUAL_MODE Mode) Mode) (Internal planning) Cell
Radio Planning Cdma20001XrttNC


bc0, bc1, bc2, bc3,

bc4, bc5, bc6, bc7,
bc8, bc9, bc10,
bc11, bc12, bc13,
bc14, bc15, bc16,
bc17, bc18, bc19, Radio Planning Cdma20001XrttNC
bc20, bc21 None None (Internal planning) ell


PERMIT_HO_ENU
M,
FORBID_HO_ENU PERMIT_HO_ENU PERMIT_HO_ENU Radio Planning Cdma20001XrttNC
PERMIT_RMV_EN
FORBID_RMV_EN UM(Permit ANR UM(Permit ANR Radio Planning Cdma20001XrttNC
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Cdma20001XrttNC

BOOLEAN_TRUE False) False) Engineering Design ell
Cdma20001XrttNC
Cdma20001XrttNC
AUTO_MODE, AUTO_MODE(Auto AUTO_MODE(Auto Radio Planning Cdma20001XrttNC
Radio Planning Cdma2000BandCla

0~17 None None (Internal planning) ss
bc0, bc1, bc2, bc3,
bc4, bc5, bc6, bc7,
bc8, bc9, bc10,
bc11, bc12, bc13,
bc14, bc15, bc16,
bc17, bc18, bc19, Radio Planning Cdma2000BandCla
bc20, bc21 None None (Internal planning) ss
NOT_CFG(Not NOT_CFG(Not Radio Planning Cdma2000BandCla

NOT_CFG, CFG configure) configure) (Internal planning) ss

0~7 2 2 (Internal planning) ss
-31.5~0 -34 -34 (Internal planning) ss

NOT_CFG(Not NOT_CFG(Not Radio Planning Cdma2000BandCla
NOT_CFG, CFG configure) configure) (Internal planning) ss

0~7 2 2 (Internal planning) ss

Radio Planning
000~999 None None (Internal planning) GeranExternalCell
Radio Planning
00~99,000~999 None None (Internal planning) GeranExternalCell
Radio Planning
Radio Planning
1~65533,65535 None None (Internal planning) GeranExternalCell

NOT_CFG, CFG configure) configure) ded Value GeranExternalCell
Radio Planning
0~255 0 None (Internal planning) GeranExternalCell
GSM_dcs1800, Radio Planning
GSM_pcs1900 None None (Internal planning) GeranExternalCell
Radio Planning
Radio Planning
Radio Planning
DTM_AVAILABLE,
DTM_NOT_AVAILA DTM_NOT_AVAILA DTM_NOT_AVAILA Radio Planning
BLE BLE BLE (Internal planning) GeranExternalCell
0~99 characters NULL(empty string) None Engineering Design GeranExternalCell
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Radio Planning

BOOLEAN_TRUE False) False) (Internal planning) GeranExternalCell
AUTO_MODE, AUTO_MODE(Auto AUTO_MODE(Auto Radio Planning
MANUAL_MODE Mode) Mode) (Internal planning) GeranExternalCell
Radio Planning
0~17 None None (Internal planning) GeranNcell
Radio Planning
Radio Planning
00~99,000~999 None None (Internal planning) GeranNcell
Radio Planning
1~65533,65535 None None (Internal planning) GeranNcell
Radio Planning
PERMIT_RMV_EN
FORBID_RMV_EN UM(Permit ANR UM(Permit ANR
UM Remove) Remove) Engineering Design GeranNcell
PERMIT_HO_ENU
M,
FORBID_HO_ENU PERMIT_HO_ENU PERMIT_HO_ENU
M M(Permit Ho) M(Permit Ho) Engineering Design GeranNcell
0~32 0 0 Engineering Design GeranNcell

BOOLEAN_TRUE False) False) ded Value GeranNcell
0~99 characters NULL(empty string) None Engineering Design GeranNcell
0~99 characters NULL(empty string) None Engineering Design GeranNcell

MANUAL_MODE Mode) Mode) (Internal planning) GeranNcell
0~1048575 None None N/A GeranNcell
0~32 characters None None N/A GeranNcell
0~32 characters None None N/A GeranNcell

Radio Planning
0~17 None None (Internal planning) GeranNfreqGroup
Radio Planning
GSM, GPRS, Radio Planning

EDGE None None (Internal planning) GeranNfreqGroup
Radio Planning
GSM_dcs1800, Radio Planning
GSM_pcs1900 None None (Internal planning) GeranNfreqGroup
NOT_CFG, CFG configure) configure) Engineering Design GeranNfreqGroup
0~7 1 1 Engineering Design GeranNfreqGroup

NOT_CFG, CFG configure) configure) ded Value GeranNfreqGroup
0~39 0 None Engineering Design GeranNfreqGroup
Default/Recommen
-115~-25, step:2 0 0 ded Value GeranNfreqGroup
Default/Recommen
0~62, step:2 7 7 ded Value GeranNfreqGroup
Default/Recommen
0~62, step:2 7 7 ded Value GeranNfreqGroup
Default/Recommen
-15~15 0 0 ded Value GeranNfreqGroup
Default/Recommen
0~255 255 255 ded Value GeranNfreqGroup
0~8 0 0 Engineering Design GeranNfreqGroup
Radio Planning GeranNfreqGroupA

0~17 None None (Internal planning) rfcn

0~17 None None Engineering Design IntraFreqBlkCell
0~503 None None Engineering Design IntraFreqBlkCell
0~99 characters NULL(empty string) None Engineering Design IntraFreqBlkCell

n1, n4, n8, n12,
n16, n24, n32, n48,
n64, n84, n96,
n128, n168, n252,
n504 n1(n1) None Engineering Design IntraFreqBlkCell
Radio Planning EutranIntraFreqNC



00~99,000~999 None None (Internal planning) ell

dB-24, dB-22, dB-
20, dB-18, dB-16,
dB-14, dB-12, dB-
10, dB-8, dB-6, dB-
5, dB-4, dB-3, dB-2,
dB-1, dB0, dB1,
dB2, dB3, dB4,
dB5, dB6, dB8,
dB10, dB12, dB14,
dB16, dB18, dB20, Default/Recommen EutranIntraFreqNC
dB22, dB24 dB0(0dB) dB0(0dB) ded Value ell
dB-24, dB-22, dB-
20, dB-18, dB-16,
dB-14, dB-12, dB-
10, dB-8, dB-6, dB-
5, dB-4, dB-3, dB-2,
dB-1, dB0, dB1,
dB2, dB3, dB4,
dB5, dB6, dB8,
dB10, dB12, dB14,
dB16, dB18, dB20, Default/Recommen EutranIntraFreqNC
PERMIT_HO_ENU
M,
FORBID_HO_ENU PERMIT_HO_ENU PERMIT_HO_ENU Radio Planning EutranIntraFreqNC
PERMIT_RMV_EN
FORBID_RMV_EN UM(Permit ANR UM(Permit ANR Radio Planning EutranIntraFreqNC
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen EutranIntraFreqNC

BOOLEAN_TRUE False) False) ded Value ell
EutranIntraFreqNC
EutranIntraFreqNC
LOW_PRIORITY, LOW_PRIORITY(L LOW_PRIORITY(L Default/Recommen EutranIntraFreqNC
HIGH_PRIORITY ow Priority) ow Priority) ded Value ell
Default/Recommen EutranIntraFreqNC
0~15 0 0 ded Value ell
AUTO_MODE, AUTO_MODE(Auto AUTO_MODE(Auto Radio Planning EutranIntraFreqNC
Radio Planning
0~17 None None (Internal planning) EutranInterNFreq
535 None None (Internal planning) EutranInterNFreq

NOT_CFG, CFG configure) configure) ded Value EutranInterNFreq

6~65535 18000 None (Internal planning) EutranInterNFreq

Radio Planning
0~7 1 1 (Internal planning) EutranInterNFreq
Default/Recommen
0~7 1 1 ded Value EutranInterNFreq

0DOT25_ENUM,
0DOT5_ENUM,
0DOT75_ENUM,
1DOT0_ENUM 1DOT0_ENUM(1.0) None Engineering Design EutranInterNFreq
0DOT25_ENUM,
0DOT5_ENUM,
0DOT75_ENUM, 0DOT75_ENUM(0.
1DOT0_ENUM 75) None Engineering Design EutranInterNFreq
MBW6, MBW15,
MBW25, MBW50,
MBW75, MBW100 None None Engineering Design EutranInterNFreq
dB-24, dB-22, dB-

20, dB-18, dB-16,
dB-14, dB-12, dB-
10, dB-8, dB-6, dB-
5, dB-4, dB-3, dB-2,
dB-1, dB0, dB1,
dB2, dB3, dB4,
dB5, dB6, dB8,
dB10, dB12, dB14,
dB16, dB18, dB20, Default/Recommen
dB22, dB24 dB0(0dB) dB0(0dB) ded Value EutranInterNFreq
Default/Recommen
0~62, step:2 11 11 ded Value EutranInterNFreq
Default/Recommen
0~62, step:2 11 11 ded Value EutranInterNFreq
Default/Recommen
-140~-44, step:2 -64 -64 ded Value EutranInterNFreq

Default/Recommen
-30~33 23 23 ded Value EutranInterNFreq
BitString00,
BitString01,
BitString10, Default/Recommen
BitString11 BitString01(01) BitString01(01) ded Value EutranInterNFreq
BOOLEAN_TRUE False) False) ded Value EutranInterNFreq
If the neighboring
E-UTRAN
frequency and the
serving frequency
are in the same
frequency band, the
value EventA3 is
recommended.
If the neighboring
E-UTRAN
frequency and the
serving frequency
are in different
frequency bands,
EventA3, EventA4, the value EventA4
EventA5 EventA4(EventA4) is recommended. Engineering Design EutranInterNFreq
Radio Planning
Radio Planning
NOT_CFG, CFG configure) configure) Engineering Design EutranInterNFreq
Radio Planning
-34~-3 -18 -18 (Internal planning) EutranInterNFreq
Radio Planning
NOT_ALLOWED, ALLOWED(ALLOW ALLOWED(Allowed Default/Recommen
ALLOWED ED) ) ded Value EutranInterNFreq
dB-24, dB-22, dB-

20, dB-18, dB-16,
dB-14, dB-12, dB-
10, dB-8, dB-6, dB-
5, dB-4, dB-3, dB-2,
dB-1, dB0, dB1,
dB2, dB3, dB4,
dB5, dB6, dB8,
dB10, dB12, dB14,
dB16, dB18, dB20, Default/Recommen
dB22, dB24 dB0(0dB) dB0(0dB) ded Value EutranInterNFreq
MANUAL_MODE Mode) Mode) (Internal planning) EutranInterNFreq
0~17 None None Engineering Design InterFreqBlkCell

0~45589,54436~65
535 None None Engineering Design InterFreqBlkCell
0~503 None None Engineering Design InterFreqBlkCell
0~99 characters NULL(empty string) None Engineering Design InterFreqBlkCell
n1, n4, n8, n12,

n16, n24, n32, n48,
n64, n84, n96,
n128, n168, n252,
n504 n1(n1) None Engineering Design InterFreqBlkCell
Radio Planning EutranInterFreqNC


00~99,000~999 None None (Internal planning) ell

dB-24, dB-22, dB-
20, dB-18, dB-16,
dB-14, dB-12, dB-
10, dB-8, dB-6, dB-
5, dB-4, dB-3, dB-2,
dB-1, dB0, dB1,
dB2, dB3, dB4,
dB5, dB6, dB8,
dB10, dB12, dB14,
dB16, dB18, dB20, Default/Recommen EutranInterFreqNC
dB-24, dB-22, dB-
20, dB-18, dB-16,
dB-14, dB-12, dB-
10, dB-8, dB-6, dB-
5, dB-4, dB-3, dB-2,
dB-1, dB0, dB1,
dB2, dB3, dB4,
dB5, dB6, dB8,
dB10, dB12, dB14,
dB16, dB18, dB20, Default/Recommen EutranInterFreqNC
PERMIT_HO_ENU
M,
FORBID_HO_ENU PERMIT_HO_ENU PERMIT_HO_ENU Radio Planning EutranInterFreqNC
PERMIT_RMV_EN
FORBID_RMV_EN UM(Permit ANR UM(Permit ANR Radio Planning EutranInterFreqNC
0~32 0 0 (Internal planning) ell
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen EutranInterFreqNC

BOOLEAN_TRUE False) False) ded Value ell
EutranInterFreqNC
EutranInterFreqNC
LOW_PRIORITY, LOW_PRIORITY(L LOW_PRIORITY(L Default/Recommen EutranInterFreqNC
HIGH_PRIORITY ow Priority) ow Priority) ded Value ell
AUTO_MODE, AUTO_MODE(Auto AUTO_MODE(Auto Radio Planning EutranInterFreqNC
Radio Planning
000~999 None None (Internal planning) EutranExternalCell
Radio Planning
00~99,000~999 None None (Internal planning) EutranExternalCell
Radio Planning
Radio Planning

535 None None (Internal planning) EutranExternalCell

NOT_CFG, CFG configure) configure) ded Value EutranExternalCell
6~65535 18000 None (Internal planning) EutranExternalCell
Radio Planning
Radio Planning
0~99 characters NULL(empty string) None Engineering Design EutranExternalCell
Radio Planning
Radio Planning
1~43,60~64 None None (Internal planning) EutranExternalCell
MANUAL_MODE Mode) Mode) (Internal planning) EutranExternalCell
Radio Planning Cdma2000BcSCell

0~17 None None (Internal planning) Op
bc0, bc1, bc2, bc3,
bc4, bc5, bc6, bc7,
bc8, bc9, bc10,
bc11, bc12, bc13,
bc14, bc15, bc16,
bc17, bc18, bc19, Radio Planning Cdma2000BcSCell
bc20, bc21 None None (Internal planning) Op

0~5 None None (Internal planning) Op
NOT_CFG(Not NOT_CFG(Not Radio Planning Cdma2000BcSCell

NOT_CFG, CFG configure) configure) (Internal planning) Op
0~7 0 0 (Internal planning) Op
NOT_CFG(Not NOT_CFG(Not Radio Planning Cdma2000BcSCell

NOT_CFG, CFG configure) configure) (Internal planning) Op
0~7 0 0 (Internal planning) Op
Radio Planning EutranNFreqRanSh

0~17 None None (Internal planning) are
0~45589,54436~65 Radio Planning EutranNFreqRanSh
535 None None (Internal planning) are

000~999 None None (Internal planning) are

00~99,000~999 None None (Internal planning) are
NOT_CFG(Not NOT_CFG(Not Radio Planning EutranNFreqRanSh
NOT_CFG, CFG configure) configure) (Internal planning) are

0~7 0 0 (Internal planning) are
Radio Planning EutranNFreqSCellO

0~45589,54436~65 Radio Planning EutranNFreqSCellO
535 None None (Internal planning) p

NOT_CFG(Not NOT_CFG(Not Default/Recommen EutranNFreqSCellO

NOT_CFG, CFG configure) configure) ded Value p
0~7 0 0 (Internal planning) p
Radio Planning GeranNFGroupSCe

0~17 None None (Internal planning) llOp

NOT_CFG(Not NOT_CFG(Not Radio Planning GeranNFGroupSCe

NOT_CFG, CFG configure) configure) (Internal planning) llOp
0~7 0 0 (Internal planning) llOp
Radio Planning
0~17 None None (Internal planning) GeranRanShare
Radio Planning
Radio Planning
Radio Planning
00~99,000~999 None None (Internal planning) GeranRanShare

NOT_CFG, CFG configure) configure) (Internal planning) GeranRanShare
Radio Planning
0~7 0 0 (Internal planning) GeranRanShare
Radio Planning
0~17 None None (Internal planning) UtranNCell
Radio Planning
(Negotiation with
000~999 None None the peer) UtranNCell
Radio Planning
00~99,000~999 None None (Internal planning) UtranNCell
Radio Planning
Radio Planning
PERMIT_HO_ENU
M,
FORBID_HO_ENU PERMIT_HO_ENU PERMIT_HO_ENU Radio Planning
M M(Permit Ho) M(Permit Ho) (Internal planning) UtranNCell
PERMIT_RMV_EN
FORBID_RMV_EN UM(Permit ANR UM(Permit ANR Radio Planning
UM Remove) Remove) (Internal planning) UtranNCell

BOOLEAN_TRUE False) False) ded Value UtranNCell
Radio Planning
0~32 0 0 (Internal planning) UtranNCell
LOW_PRIORITY, LOW_PRIORITY(L LOW_PRIORITY(L Default/Recommen

HIGH_PRIORITY ow Priority) ow Priority) ded Value UtranNCell
0~99 characters NULL(empty string) None Engineering Design UtranNCell
0~99 characters NULL(empty string) None Engineering Design UtranNCell

MANUAL_MODE Mode) Mode) (Internal planning) UtranNCell
0~1048575 None None N/A UtranNCell
0~32 characters None None N/A UtranNCell
0~32 characters None None N/A UtranNCell

Normal, overload,
congestion None None N/A UtranNCell
Radio Planning
0~17 None None (Internal planning) UtranNFreqSCellOp
Radio Planning
Radio Planning

NOT_CFG, CFG configure) configure) ded Value UtranNFreqSCellOp
Radio Planning
0~7 0 0 (Internal planning) UtranNFreqSCellOp
Radio Planning
0~17 None None (Internal planning) UtranRanShare
Radio Planning
Radio Planning
Radio Planning
00~99,000~999 None None (Internal planning) UtranRanShare

NOT_CFG, CFG configure) configure) (Internal planning) UtranRanShare
Radio Planning
0~7 0 0 (Internal planning) UtranRanShare
Radio Planning
0~17 None None (Internal planning) UtranNFreq
Radio Planning
0~16383 None None (Internal planning) UtranNFreq
R99, HSDPA,
HSUPA, HSPA HSUPA HSUPA Engineering Design UtranNFreq
UTRAN_FDD, Radio Planning

UTRAN_TDD UTRAN_FDD UTRAN_FDD (Internal planning) UtranNFreq
NOT_CFG, CFG configure) configure) ded Value UtranNFreq
Radio Planning
0~16383 0 None (Internal planning) UtranNFreq

NOT_CFG, CFG configure) configure) ded Value UtranNFreq
Radio Planning
0~7 1 1 (Internal planning) UtranNFreq
Default/Recommen
-50~33 24 24 ded Value UtranNFreq
Default/Recommen
-15~15 0 0 ded Value UtranNFreq
Default/Recommen
-24~0 -22 -22 ded Value UtranNFreq
Default/Recommen
-119~-25, step:2 -58 -58 ded Value UtranNFreq
Default/Recommen
0~62, step:2 6 6 ded Value UtranNFreq
Default/Recommen
0~62, step:2 6 6 ded Value UtranNFreq
Default/Recommen
0~31 0 0 ded Value UtranNFreq
Default/Recommen
0~31 0 0 ded Value UtranNFreq
Priority_0,
Priority_1,
Priority_2,
Priority_3,
Priority_4,
Priority_5,
Priority_6,
Priority_7,
Priority_8,
Priority_9,
Priority_10,
Priority_11,
Priority_12,
Priority_13,
Priority_14,
Priority_15,
Priority_16 Priority_2(Priority 2) Priority_2(Priority 2) Engineering Design UtranNFreq
Priority_0,
Priority_1,
Priority_2,
Priority_3,
Priority_4,
Priority_5,
Priority_6,
Priority_7,
Priority_8,
Priority_9,
Priority_10,
Priority_11,
Priority_12,
Priority_13,
Priority_14,
Priority_15,
Priority_16 Priority_2(Priority 2) Priority_2(Priority 2) Engineering Design UtranNFreq
Radio Planning
0~8 0 0 (Internal planning) UtranNFreq
Priority_0,
Priority_1,
Priority_2,
Priority_3,
Priority_4,
Priority_5,
Priority_6,
Priority_7,
Priority_8,
Priority_9,
Priority_10,
Priority_11,
Priority_12,
Priority_13,
Priority_14,
Priority_15, Radio Planning
Priority_16 Priority_2(Priority 2) Priority_2(Priority 2) (Internal planning) UtranNFreq
Radio Planning
000~999 None None (Internal planning) UtranExternalCell
Radio Planning
00~99,000~999 None None (Internal planning) UtranExternalCell
Radio Planning
Radio Planning
Radio Planning
NOT_CFG, CFG configure) configure) ded Value UtranExternalCell
Radio Planning
0~16383 0 None (Internal planning) UtranExternalCell
UTRAN_FDD,
UTRAN_TDD UTRAN_FDD UTRAN_FDD Engineering Design UtranExternalCell
NOT_CFG, CFG configure) configure) ded Value UtranExternalCell
Radio Planning
0~255 0 None (Internal planning) UtranExternalCell
Radio Planning
Radio Planning
1~65533,65535 None None (Internal planning) UtranExternalCell
0~99 characters NULL(empty string) None Engineering Design UtranExternalCell

BOOLEAN_TRUE False) False) ded Value UtranExternalCell
Radio Planning
Radio Planning
1~43,60~64 None None (Internal planning) UtranExternalCell
MANUAL_MODE Mode) Mode) (Internal planning) UtranExternalCell
0~100 80 80 Engineering Design ANR

r1, r2, r4, r8, r16,

r32, r64, Infinity r4(4) r4(4) Engineering Design ANR
120ms, 240ms,
480ms, 640ms,
1024ms, 2048ms,
5120ms, 10240ms,
1min, 6min, 12min,
30min, 60min 5120ms 5120ms Engineering Design ANR
-130~-70 -102 -102 Engineering Design ANR


FREE,
CONTROLLED FREE(FREE) FREE(FREE) Engineering Design ANR

OFF, ON OFF(Off) OFF(Off) Engineering Design ANR
Default/Recommen
00:00:00~23:59:59 14:00:00 14:00:00 ded Value ANR
Default/Recommen
00:00:00~23:59:59 15:00:00 15:00:00 ded Value ANR

-31.5~0, step:0.5 -30 -30 Engineering Design ANR
-31.5~0, step:0.5 -16 -16 Engineering Design ANR

NCL_MODE, NCL_MODE(NCL NCL_MODE(NCL
NCL_NRT_MODE Mode) Mode) Engineering Design ANR
Equipment
0~35 None None Planning BfAnt
Andrew, TongYu,
HaiTian, COMBA,
TTCOM, MOBI,
GUOXIN, JIESAI,
OtherManufacturer
1,
OtherManufacturer
2,
OtherManufacturer OtherManufacturer
3, HuaweiAgisson, 1(OtherManufactur Default/Recommen
ShengLu, HongXin er1) None ded Value BfAnt
Equipment
0 0 0 Planning BfAnt
Equipment
60~254 None None Planning BfAnt
Equipment
0 0 None Planning BfAnt
Equipment
0~128 characters NULL(empty string) None Planning BfAnt
Radio Planning
0~15 0 None (Internal planning) BfAnt
Radio Planning
30,65,90,360 30 None (Internal planning) BfAnt
Radio Planning
33~64 33 None (Internal planning) BfAnt
INTELLIGENT, Default/Recommen
DISTRIBUTED INTELLIGENT None ded Value BfAnt
SINGLE, DUAL None None N/A BfAnt
0~360 None None N/A BfAnt
FOURPORTS,
EIGHTPORTS None None N/A BfAnt
-180~180 None None N/A BfAnt



65535~429496729
5 None None N/A BfAnt
0~17 None None Engineering Design CaGroup

FDD,
TDD_SAME_SA,
TDD_DIFF_SA FDD(FDD) None Engineering Design CaGroup
0~17 None None Engineering Design CaGroupCell

0~17 None None Engineering Design CaGroupCell
BOOLEAN_FALSE, BOOLEAN_FALSE(
BOOLEAN_TRUE False) OFF(Off) Engineering Design CellIdPrdUpt
2000-01-
01T00:00:00+00:00
~2099-12- 2000-01- 2000-01-
31T23:59:59+00:00 01T00:00:00+00:00 01T00:00:00+00:00 Engineering Design CellIdPrdUpt
1~365 1 1 Engineering Design CellIdPrdUpt

Default/Recommen
1~65535 5 5 ded Value eNBLicenseAlmThd
Default/Recommen
Default/Recommen
Default/Recommen
2 ameter0_bit32:Off None ded Value eNBRsvdPara
2 ameter1_bit32:Off None ded Value eNBRsvdPara
2 ameter2_bit32:On None ded Value eNBRsvdPara
Default/Recommen
0~4294967295 0 None ded Value eNBRsvdPara
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
UtranCsfbSwitch, ff, ff,
GeranCsfbSwitch, Cdma20001xRttCsf Cdma20001xRttCsf
Cdma1xRttCsfbSwit bSwitch:Off, bSwitch:Off,
ch, UtranServiceHoSwit UtranServiceHoSwit
UtranServiceHoSwit ch:Off, ch:Off,
ch, GeranServiceHoSw GeranServiceHoSw
GeranServiceHoSw itch:Off, itch:Off,
itch, Cdma2000HrpdSer Cdma2000HrpdSer
CdmaHrpdServiceH viceHoSwitch:Off, viceHoSwitch:Off,
oSwitch, Cdma20001xRttSer Cdma20001xRttSer
Cdma1xRttService viceHoSwitch:Off, viceHoSwitch:Off,
HoSwitch, UlQualityInterRATH UlQualityInterRATH
UlQualityInterRATH oSwitch:Off, oSwitch:Off,
oSwitch, InterPlmnHoSwitch: InterPlmnHoSwitch:
InterPlmnHoSwitch, Off, Off,
UtranFlashCsfbSwit UtranFlashCsfbSwit UtranFlashCsfbSwit
ch, ch:Off, ch:Off,
GeranFlashCsfbSwi GeranFlashCsfbSwi GeranFlashCsfbSwi
tch, tch:Off, tch:Off,
ServiceBasedInterF ServiceBasedInterF ServiceBasedInterF
reqHoSwitch, reqHoSwitch:Off, reqHoSwitch:Off,
UlQualityInterFreqH UlQualityInterFreqH UlQualityInterFreqH
oSwitch, oSwitch:Off, oSwitch:Off,
CsfbAdaptiveBlindH CsfbAdaptiveBlindH CsfbAdaptiveBlindH
oSwitch, oSwitch:Off, oSwitch:Off,
UtranCsfbSteeringS UtranCsfbSteeringS UtranCsfbSteeringS
GeranCsfbSteering GeranCsfbSteering GeranCsfbSteering
Switch, Switch:Off, Switch:Off,
CSFBLoadInfoSwit CSFBLoadInfoSwit CSFBLoadInfoSwit
ch, ch:Off, ch:Off,
Cdma1XrttEcsfbSwi Cdma1XrttEcsfbSwi Cdma1XrttEcsfbSwi
tch, tch:Off, tch:Off,
EmcBlindHoA1Swit EmcBlindHoA1Swit EmcBlindHoA1Swit
ch, ch:Off, ch:Off,
EmcInterFreqBlind EmcInterFreqBlind EmcInterFreqBlind
HoSwitch HoSwitch:Off HoSwitch:Off Engineering Design ENodeBAlgoSwitch
EutranVoipCapSwit EutranVoipCapSwit
ch:On, ch:On,
UtranVoipCapSwitc UtranVoipCapSwitc
h:Off, h:Off,
GeranVoipCapSwitc GeranVoipCapSwitc
h:Off, h:Off,
EutranVoipCapSwit Cdma1xRttVoipCap Cdma1xRttVoipCap
ch, Switch:Off, Switch:Off,
UtranVoipCapSwitc UtranPsHoSwitch:O UtranPsHoSwitch:O
h, ff, ff,
GeranVoipCapSwitc GeranPsHoSwitch: GeranPsHoSwitch:
h, Off, Off,
Cdma1xRttVoipCap CdmaHrpdNonOtpi CdmaHrpdNonOtpi
Switch, misedHoSwitch:Off, misedHoSwitch:Off,
UtranPsHoSwitch, CdmaHrpdOptimise CdmaHrpdOptimise
GeranPsHoSwitch, dHoSwitch:Off, dHoSwitch:Off,
CdmaHrpdNonOtpi GeranNaccSwitch: GeranNaccSwitch:
misedHoSwitch, Off, Off,
CdmaHrpdOptimise GeranCcoSwitch:Of GeranCcoSwitch:Of
dHoSwitch, f, f,
GeranNaccSwitch, UtranSrvccSwitch:O UtranSrvccSwitch:O
GeranCcoSwitch, ff, ff,
UtranSrvccSwitch, GeranSrvccSwitch: GeranSrvccSwitch:
GeranSrvccSwitch, Off, Off,
Cdma1xRttSrvccSw Cdma1xRttSrvccSw Cdma1xRttSrvccSw
UtranRedirectSwitc UtranRedirectSwitc UtranRedirectSwitc
h, h:Off, h:Off,
GeranRedirectSwitc GeranRedirectSwitc GeranRedirectSwitc
h, h:Off, h:Off,
CdmaHrpdRedirect CdmaHrpdRedirect CdmaHrpdRedirect
Cdma1xRttRedirect Cdma1xRttRedirect Cdma1xRttRedirect
BlindHoSwitch, BlindHoSwitch:Off, BlindHoSwitch:Off,
LcsSrvccSwitch, LcsSrvccSwitch:Off, LcsSrvccSwitch:Off,
AutoGapSwitch AutoGapSwitch:Off AutoGapSwitch:Off Engineering Design ENodeBAlgoSwitch
DlIcicSwitch_OFF_
ENUM,
DlIcicDynamicSwitc
h_ON_ENUM,
DlIcicStaticSwitch_
ON_ENUM,
DlIcicReuse3Switch DlIcicSwitch_OFF_ DlIcicSwitch_OFF_
_ON_ENUM ENUM ENUM Engineering Design ENodeBAlgoSwitch
IntraRatEventAnrS IntraRatEventAnrS IntraRatEventAnrS
IntraRatFastAnrSwit IntraRatFastAnrSwit IntraRatFastAnrSwit
ch, ch:Off, ch:Off,
IntraRatAnrAutoDel IntraRatAnrAutoDel IntraRatAnrAutoDel
Switch, Switch:On, Switch:On,
UtranEventAnrSwitc UtranEventAnrSwitc UtranEventAnrSwitc
h, h:Off, h:Off,
GeranEventAnrSwit GeranEventAnrSwit GeranEventAnrSwit
ch, ch:Off, ch:Off,
UtranFastAnrSwitch UtranFastAnrSwitch UtranFastAnrSwitch
, :Off, :Off,
GeranFastAnrSwitc GeranFastAnrSwitc GeranFastAnrSwitc
h, h:Off, h:Off,
CdmaFastAnrSwitc CdmaFastAnrSwitc CdmaFastAnrSwitc
h, h:Off, h:Off,
UtranAutoNrtDelete UtranAutoNrtDelete UtranAutoNrtDelete
GeranAutoNrtDelet GeranAutoNrtDelet GeranAutoNrtDelet
eSwitch, eSwitch:On, eSwitch:On,
CdmaAutoNrtDelete CdmaAutoNrtDelete CdmaAutoNrtDelete
ExtendIntraRatAnrS ExtendIntraRatAnrS ExtendIntraRatAnrS
CdmaEventAnrSwit CdmaEventAnrSwit CdmaEventAnrSwit
ch, ch:Off, ch:Off,
MlbBasedEventAnr MlbBasedEventAnr MlbBasedEventAnr
Switch Switch:Off Switch:Off Engineering Design ENodeBAlgoSwitch
LoadBasedSwitch: LoadBasedSwitch:
LoadBasedSwitch, Off, Off,
GeranFlashRedirect GeranFlashRedirect GeranFlashRedirect
UranFlashRedirect UranFlashRedirect UranFlashRedirect
IntraFreqMroAlgoS IntraFreqMroAlgoS
witch:Off, witch:Off,
InterFreqMroAlgoS InterFreqMroAlgoS
witch:Off, witch:Off,
IntraFreqMroSwitch UtranMroSwitch:Off UtranMroSwitch:Off
, , ,
InterFreqMroSwitch GeranMroSwitch:Of GeranMroSwitch:Of
, UtranMroSwitch, f, f,
GeranMroSwitch, UeMroAlgoSwitch: UeMroAlgoSwitch:
UEMroSwitch Off Off Engineering Design ENodeBAlgoSwitch
TpeAlgoSwitch TpeAlgoSwitch:Off TpeAlgoSwitch:Off Engineering Design ENodeBAlgoSwitch

Uplink Intra-eNB Uplink Intra-eNB
UlIcicIntraSwitch ICIC switch:Off ICIC switch:Off Engineering Design ENodeBAlgoSwitch
OFF, STATIC,
DYNAMIC OFF(Off) OFF(Off) Engineering Design ENodeBAlgoSwitch
Default/Recommen
OtdoaSwitch OTDOA switch:Off OTDOA switch:Off ded Value ENodeBAlgoSwitch
UU flow control UU flow control

UlUuFlowCtrlSwitch switch:Off switch:Off Engineering Design ENodeBAlgoSwitch
Default/Recommen
OFF, ON OFF(Off) OFF(Off) ded Value ENodeBAlgoSwitch
SymbolShutdownS Symbol shutdown Symbol shutdown

witch switch:Off switch:Off Engineering Design ENodeBAlgoSwitch
UTRAN_RIM_SWIT
CH, UTRAN RIM UTRAN RIM
GERAN_RIM_SWI Switch:Off, GERAN Switch:Off, GERAN
TCH RIM Switch:Off RIM Switch:Off Engineering Design ENodeBAlgoSwitch
NBSLTEPLMNRou NBSLTEPLMNRou NBSLTEPLMNRou
ndSwitch, ndSwitch:Off, ndSwitch:Off,
NBSLTERANSharin NBSLTERANSharin NBSLTERANSharin
gSwitch, gSwitch:Off, gSwitch:Off,
NBSUTRANRANSh NBSUTRANRANSh NBSUTRANRANSh
aringSwitch, aringSwitch:Off, aringSwitch:Off,
NBSGERANRANSh NBSGERANRANSh NBSGERANRANSh
aringSwitch aringSwitch:Off aringSwitch:Off Engineering Design ENodeBAlgoSwitch
UtranFreqLayerMea UtranFreqLayerMea UtranFreqLayerMea
sSwitch, sSwitch:Off, sSwitch:Off,
UtranFreqLayerBlin UtranFreqLayerBlin UtranFreqLayerBlin
dSwitch, dSwitch:Off, dSwitch:Off,
UtranSrvccSteering UtranSrvccSteering UtranSrvccSteering
Default/Recommen
OFF, ON OFF(Off) None ded Value ENodeBAlgoSwitch
VQM_ALGO_SWIT
CH_OFF,
VQM_ALGO_SWIT VQM_ALGO_SWIT VQM_ALGO_SWIT
CH_ON CH_OFF(Disable) CH_OFF(Disable) Engineering Design ENodeBAlgoSwitch
IntraOpUeNumPree IntraOpUeNumPree IntraOpUeNumPree

mptSwitch, mptSwitch:Off, mptSwitch:Off,
InterOpUeNumPree InterOpUeNumPree InterOpUeNumPree
mptSwitch mptSwitch:Off mptSwitch:Off Engineering Design ENodeBAlgoSwitch
eNodeBAutoPower
OFF, ON OFF(Off) None Engineering Design Off
eNodeBAutoPower
22:00:00~05:00:00 0:00:00 None Engineering Design Off
eNodeBAutoPower
23:00:00~06:00:00 6:00:00 None Engineering Design Off
NORMAL, eNodeBAutoPower
POWER_OFF None None N/A Off
eNodeBFlowCtrlPar
1~20 4 4 Engineering Design a
eNodeBFlowCtrlPar
50~100 100 100 Engineering Design a
1~100 25 25 Engineering Design LicRatio

SHARING,
DEDICATE SHARING(Sharing) SHARING(Sharing) Engineering Design LicRatio
Radio Planning
0~5 None None (Internal planning) LicRatioSharePolicy
Radio Planning
0~100 0 None (Internal planning) LicRatioSharePolicy
Radio Planning
0~100 0 0 (Internal planning) LicRatioSharePolicy
Default/Recommen
1~70000 1440 1440 ded Value MRO
Default/Recommen
0~100 99 99 ded Value MRO
Default/Recommen
0~10000 1000 1000 ded Value MRO
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
-140~-44 -116 -116 ded Value MRO
Default/Recommen
-140~-44 -116 -116 ded Value MRO
Default/Recommen
0~9 None None Engineering Design SimuLoad

Default/Recommen
0~100 50 50 ded Value SimuLoad
Default/Recommen
Default/Recommen
Default/Recommen
Default/Recommen
OFF, ON OFF(Off) OFF(Off) ded Value SimuLoad
OFF, ON OFF(Off) OFF(Off) Engineering Design TcpAckCtrlAlgo
0~4294967295 0 0 Engineering Design TcpAckCtrlAlgo
1~255 1 1 Engineering Design TcpAckCtrlAlgo

Default/Recommen
OFF, ON OFF(Off) OFF(Off) ded Value TcpMssCtrl
Default/Recommen
1~1460 1460 1460 ded Value TcpMssCtrl
0~261120,275943~ Default/Recommen
307200 0 0 ded Value TddFrameOffset
OFF, ON OFF(Off) OFF(Off) Engineering Design TddResModeSwitch
0~20 3 3 Engineering Design TpeAlgo


1~255 100 100 Engineering Design VQMAlgo

Service
Parameter Interrupted After Interruption
Relationship Access Modification Interruption Scope Duration (min)
No (And no impact
on the UE in idle
None Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
None Read Only N/A N/A N/A
URL in a CA MO
must begin with http
or https, the IP
address must be a
valid IP address,
and the port No (And no impact
number must range on the UE in idle
from 1 to 65535. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
USERADDINFO in
a CERTREQ MO
must contain only
printable ASCII
characters (the
ASCII value within No (And no impact
the range of 32 to on the UE in idle
127). Read & Write mode) N/A N/A
COUNTRY in a
CERTREQ MO
must contain only
the following
printable ASCII
characters: A~Z a~z
' ( ) + , - . / 0~9 :
= ?.
The string length of
COUNTRY in a No (And no impact
CERTREQ MO on the UE in idle
must be 0 or 2. Read & Write mode) N/A N/A
ORG in a
CERTREQ MO
must contain only
printable ASCII
characters (the
ORGUNIT in a
CERTREQ MO
must contain only
printable ASCII
characters (the
STATEPROVINCE
NAME in a
CERTREQ MO
must contain only
printable ASCII
characters (the
LOCALITY in a
CERTREQ MO
must contain only
printable ASCII
characters (the
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
LOCALNAME in a
CERTREQ MO
must contain only
printable ASCII
characters (the
LOCALIP in a
CERTREQ MO
must be a valid IP
address of class A,
B, or C. In addition,
it cannot be set to
the reserved IP
addresses 127.x.x.x No (And no impact
or 0.x.x.x but can on the UE in idle
be set to 0.0.0.0. Read & Write mode) N/A N/A
The CERTMK MO
with APPCERT set
to appcert.pem
defines a certificate
configured on a BS
before delivery.
There is only one
such MO on a BS
and this MO cannot
be added or
removed.
APPCERT in a
CERTMK MO can
contain only ASCII
characters. The
name must not
contain spaces or
the following
characters: \ / : * ? "
< > |.
When an CERTMK
MO is being added,
the APPCERT is
case-insensitive;
but when an
CERTMK MO is
referenced, the
APPCERT is case-
sensitive. Read Only N/A N/A N/A

On a BS, there is
only one activated
device certificate for
each application
type. Read Only N/A N/A N/A
APPCERT in an
APPCERT MO can
contain only ASCII
characters. The
name must not
contain spaces or
the following No (And no impact
characters: \ / : * ? " on the UE in idle
< > |. Read & Write mode) N/A N/A

In the APPCERT
MO, this parameter
is valid only when No (And no impact
APPTYPE is set to on the UE in idle
IKE. Read & Write mode) N/A N/A
CERTNAME in a
CROSSCERT MO
can contain only
ASCII characters.
The name must not
contain spaces or
the following
< > |.
When an
CROSSCERT MO
is being added, the
CERTNAME is
case-insensitive;
but when an
CROSSCERT MO
is referenced, the
CERTNAME is
case-sensitive. Read Only N/A N/A N/A

On a BS, there is
only one
TRUSTCERT MO
with CERTNAME
set to caroot.pem.
CERTNAME in a
TRUSTCERT MO
can contain only
ASCII characters.
The name must not
contain spaces or
the following
< > |.
When an
TRUSTCERT MO is
being added, the
CERTNAME is
case-insensitive;
but when an
TRUSTCERT MO is
referenced, the
CERTNAME is

CERTNAME in a
CRL MO can
contain only ASCII
characters. The
name must not
contain spaces or
the following
< > |.
When an CRL MO
is being added, the
CERTNAME is
case-insensitive;
but when an CRL
MO is referenced,
the CERTNAME is

IP in a CRLTSK
MO must be set to
a valid IP address
of class A, B, or C.
In addition, It
cannot be set to
127.x.x.x or 0.x.x.x
(including 0.0.0.0). Read Only N/A N/A N/A
This parameter is
valid only when
CRLGETMETHOD
in the same
CRLTSK MO is set
to LDAP. Read Only N/A N/A N/A
Each CRLTSK MO
must have a unique
FILENAME.When
an CRLTSK MO is
being added, the
FILENAME is case-
insensitive; but
when an CRLTSK
MO is referenced,
the FILENAME is
case-sensitive.
FILENAME in a
CRLTSK MO can
contain only ASCII
characters. The
name must not
contain spaces or
the following
< > |. Read Only N/A N/A N/A
This parameter is
valid only when
CRLGETMETHOD
in the same
CRLTSK MO is set
to LDAP. Read Only N/A N/A N/A
SIP must be a valid

IP address of class
A, B, or C. In
addition, it cannot
be set to the
reserved IP
addresses 0.x.x.x
or 127.x.x.x, but
can be set to
0.0.0.0. Read Only N/A N/A N/A
No (And no impact
on the UE in idle
In a CERTCHKTSK
MO, PERIOD must No (And no impact
be smaller than on the UE in idle
ALMRNG. Read & Write mode) N/A N/A
In a CERTCHKTSK
MO, PERIOD must No (And no impact
ALMRNG. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

This parameter is
valid only when
ACLID in the ACL
MO is within the
range of 3000 to
3999. Read Only N/A N/A N/A
No (And no impact
on the UE in idle
This parameter is
valid only when
ACLID in the ACL
MO is within the No (And no impact
range of 3000 to on the UE in idle
3999. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

This parameter is
valid only when
ACLID in the
ACLRULE MO is
within the range of
3000 to 3999. Read Only N/A N/A N/A
This parameter is
valid only when
ACLID in the Services are
ACLRULE MO is interrupted until the
within the range of parameter is
3000 to 3999. Read & Write Yes BS correctly set.
This parameter is
valid only when
In an ACLRULE
MO, MFRG and
SMPT must not be
both set to YES.
In the ACLRULE
MO, this parameter
is valid only when
PT is set to TCP,
UDP, or SCTP. Read Only N/A N/A N/A
In the ACLRULE
MO, this parameter
is valid only when
SMPT is set to
YES. Read Only N/A N/A N/A
In an ACLRULE
MO, if SOP is set to
OP_RANGE, SPT1
must be smaller
than or equal to
SPT2.
In the ACLRULE
MO, this parameter
is valid only when
SMPT is set to
In an ACLRULE
OP_RANGE, SPT1
must be smaller
than or equal to
SPT2.
In the ACLRULE
MO, this parameter
is valid only when
SMPT is set to YES
and SOP is set to
OP_RANGE. Read Only N/A N/A N/A
This parameter is
valid only when
This parameter is
valid only when
In an ACLRULE
MO, MFRG and
DMPT must not be
both set to YES.
In the ACLRULE
MO, this parameter
is valid only when
PT is set to TCP,
UDP, or SCTP. Read Only N/A N/A N/A
In the ACLRULE
MO, this parameter
is valid only when
DMPT is set to
In an ACLRULE
MO, if DOP is set to
OP_RANGE, DPT1
must be smaller
than or equal to
DPT2.
In the ACLRULE
MO, this parameter
is valid only when
DMPT is set to
In an ACLRULE
OP_RANGE, DPT1
must be smaller
than or equal to
DPT2.
In the ACLRULE
MO, this parameter
is valid only when
DOP is set to
OP_RANGE. Read Only N/A N/A N/A
This parameter is
valid only when
ACLID in the
ACLRULE MO is
within the range of
3000 to 3999. Read Only N/A N/A N/A
In the ACLRULE
MO, this parameter
is valid only when
MDSCP is set to
In an ACLRULE
MO, MFRG and
SMPT must not be
both set to YES.
In an ACLRULE
MO, MFRG and
DMPT must not be
both set to YES.
In the ACLRULE
MO, this parameter
is valid only when
PT is set to a valid
value. Read Only N/A N/A N/A
This parameter is
valid only when
ACLID in the
ACLRULE MO is No (And no impact
within the range of on the UE in idle
3000 to 3999. Read & Write mode) N/A N/A
This parameter is
valid only when
If ACLID ranges
from 4000 to 4999
and VLANIDOP is
set to OP_RANGE, Services are
VLANID1 must be interrupted until the
smaller than parameter is
VLANID2. Read & Write Yes BS correctly set.
If ACLID ranges
from 4000 to 4999
and VLANIDOP is
set to OP_RANGE, Services are
VLANID1 must be interrupted until the
smaller than parameter is
VLANID2. Read & Write Yes BS correctly set.


Services are
interrupted until the
parameter is
None Read & Write Yes BS correctly set.
Services are
parameter is
In an ACLRULE6
MO, this parameter
is valid when PT is
set to TCP, UDP, or
SCTP. Read Only N/A N/A N/A
In an ACLRULE6
MO, this parameter
is valid when PT is
set to TCP, UDP, or
SCTP and SMPT is
set to YES. Read Only N/A N/A N/A
In an ACLRULE6
OP_RANGE, SPT1
must be smaller
than SPT2.
In an ACLRULE6
MO, this parameter
is valid when PT is
set to TCP, UDP, or
SCTP and SMPT is
In an ACLRULE6
OP_RANGE, SPT1
must be smaller
than SPT2.
In an ACLRULE6
MO, this parameter
is valid when PT is
set to TCP, UDP, or
SCTP, SMPT is set
to YES, and SOP is
set to OP_RANGE. Read Only N/A N/A N/A
Services are
parameter is
Services are
parameter is
In an ACLRULE6
MO, this parameter
is valid when PT is
set to TCP, UDP, or
SCTP. Read Only N/A N/A N/A
In an ACLRULE6
MO, this parameter
is valid when PT is
set to TCP, UDP, or
SCTP and DMPT is
In an ACLRULE6
OP_RANGE, DPT1
must be smaller
than DPT2.
In an ACLRULE6
MO, this parameter
is valid when PT is
set to TCP, UDP, or
SCTP and DMPT is
In an ACLRULE6
OP_RANGE, DPT1
must be smaller
than DPT2.
In an ACLRULE6
MO, this parameter
is valid when PT is
set to TCP, UDP, or
SCTP, DMPT is set
to YES, and DOP is
set to OP_RANGE. Read Only N/A N/A N/A

In an ACLRULE6
MO, this parameter
is valid when
MDSCP is set to
No (And no impact
on the UE in idle

None Read & Write Yes BS Less than 1 minute

SRCIP in a
BFDSESSION MO
must be a valid IP
address of class A,
it cannot be set to
(including 0.0.0.0).
SRCIP must be
different from
DSTIP in a
BFDSESSION MO. Read & Write Yes BS Less than 1 minute
DSTIP in a
BFDSESSION MO
must be a valid IP
address of class A,
it cannot be set to
SRCIP must be
different from
DSTIP in a
BFDSESSION MO. Read & Write Yes BS Less than 1 minute
In the
BFDSESSION MO,
if SRCIP is set to a
logical IP address,
HT cannot be set to
SINGLE_HOP. Read & Write Yes BS Less than 1 minute
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle


No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In the CFMBNDIP
MO, the total length
of MANAME and
MDNAME cannot
exceed 44 bytes. Read Only N/A N/A N/A
MANAME in a
CFMBNDIP MO
can contain only
ASCII characters.
The name cannot
be null characters
or contain the
following
characters: ', ", !, ?,
<, >, and \.
In the CFMBNDIP
of MANAME and
MDNAME cannot

In the CFMMA MO,

the total length of
MANAME and
MDNAME cannot
MANAME in a
CFMMA MO can
contain only ASCII
characters. The
name cannot be
null characters or
contain the
following
<, >, and \.
In the CFMMA MO,
the total length of
MANAME and
MDNAME cannot

In the CFMMA MO,
this parameter is
valid only when
BNDVLAN is set to
In the CFMMA MO,
this parameter is
valid only when No (And no impact
BNDVLAN is set to on the UE in idle
YES. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle

MDNAME in a
CFMMD MO can
contain only ASCII
characters. The
name cannot be
null characters or
contain the
following
<, >, and \. Read Only N/A N/A N/A
In the CFMMEP
of MANAME and
MDNAME cannot
In the CFMMEP
of MANAME and
MDNAME cannot
exceed 44 bytes.
MANAME in a
CFMMEP MO can
contain only ASCII
characters. The
name cannot be
null characters or
contain the
following
<, >, and \. Read Only N/A N/A N/A

In a CFMMEP MO,
this parameter must
be set to
ETH_COVERBOAR
D if SN is set to a
value within the
range of 0 to 5.
In a CFMMEP MO,
this parameter can
be set to
BASE_BOARD or
ETH_COVERBOAR
D if SN is set to 6 or
In the CFMMEP
MO, if PT is set to
ETH and SBT is set
to
ETH_COVERBOAR
D, the value range
from 0 to 5.
In the CFMMEP
MO, if PT is set to
ETH and SBT is set
to BASE_BOARD,
this parameter can
be set to 0 or 1.
In the CFMMEP
MO, if PT is set to
ETHTRK and SBT
is set to
BASE_BOARD, this
parameter can be
set to 0 or 1.
In the CFMMEP
MO, if PT is set to
ETHTRK and SBT
is set to
ETH_COVERBOAR
D, the value range
from 0 to 2. Read Only N/A N/A N/A




In the CFMRMEP
of MANAME and
MDNAME cannot
MANAME in a
CFMRMEP MO can
contain only ASCII
characters. The
name cannot be
null characters or
contain the
following
<, >, and \.
In the CFMRMEP
of MANAME and
MDNAME cannot
MAC in the
CFMRMEP MO is
expressed in the
format of XXXX-
XXXX-XXXX. It
cannot be set to the
broadcast MAC
address (FFFF-
FFFF-FFFF). It also
cannot be set to a
multicast MAC
address, which the
first left byte in the
Destination
Adddress field is an
odd number. Read Only N/A N/A N/A


In the CPBEARER
MO, if BEARTYPE
is set to SAAL, this
parameter can be
set to any value in
the range of 0 to
63.
In the CPBEARER
MO, if BEARTYPE
is set to SCTP, this
parameter can be
set to any value in
the range of 0 to
65535.
In the CPBEARER
MO, if BEARTYPE
is set to SCTP6,
this parameter can
be set to any value
in the range of 0 to
65535. Read & Write Yes BS Less than 1 minute
In the CPBEARER
MO, this parameter
is valid only when
BEARTYPE is set No (And no impact
to SCTPLNK or on the UE in idle
SCTPLNK6. Read & Write mode) N/A N/A

In a DEVIP MO,
this parameter can
be set to
E1_COVERBOARD
or
ETH_COVERBOAR
D if SN is set to a
value within the
range of 0 to 5.
In a DEVIP MO,
this parameter can
be set to
BASE_BOARD,
BACK_BOARD, or
ETH_COVERBOAR
range of 0 to 3.
In the DEVIP MO, if
PT is set to
LOOPINT, and
VRFIDX is not set
to 0, PN can be set
to any value in the
range of 4(VRFIDX)
+4 to 4(VRFIDX)+7.
In the DEVIP MO, if
SBT is set to
BASE_BOARD, this
parameter can be
set to PPP,
MPGRP, ETH,
ETHTRK,
LOOPINT, or
SUBIF.
In the DEVIP MO, if
SBT is set to
BACK_BOARD, this
parameter must be
set to PPP.
In the DEVIP MO, if
SBT is set to
E1_COVERBOARD
, this parameter can
be set to PPP,
MPGRP, or
LOOPINT.
In the DEVIP MO, if
SBT is set to
ETH_COVERBOAR
D, this parameter
can be set to ETH,
ETHTRK, or
LOOPINT. Read Only N/A N/A N/A
PT is set to
MPGRP.
In a DEVIP MO,
this parameter can
be set to a value
within the range of
0 to 5 if SBT is set
to
ETH_COVERBOAR
D and PT is set to
ETH.
In a DEVIP MO,
this parameter can
be set to a value
within the range of
to
ETH_COVERBOAR
D and PT is set to
ETHTRK.
In a DEVIP MO,
this parameter can
be set to a value
within the range of
to
E1_COVERBOARD
or
ETH_COVERBOAR
D and PT is set to
LOOPINT.
In a DEVIP MO,
this parameter can
be set to a value
within the range of
0 to 63 if PT is set
to SUBIF. Read Only N/A N/A N/A
In the DEVIP MO, if

PT is not set to
SUBIF or LOOPINT,
VRFIDX must be
set to 0.
In the DEVIP MO, if
PT and VRFIDX are
set to LOOPINT
and 0, respectively,
PN can be set to
any value in the
range of 0 to 3.
In the DEVIP MO, if
PT is set to
LOOPINT, and
VRFIDX is not set
to 0, PN can be set
to any value in the
range of 4(VRFIDX)
+4 to 4(VRFIDX)+7. Read Only N/A N/A N/A
IP in the DEVIP MO
must be set to a
valid IP address of
Class A, B, or C. In
addition, it cannot
be 127.x.x.x or
0.x.x.x.
In the logical
operation result of
IP and MASK in a
DEVIP MO, neither
the network ID nor
host ID can be all 0
or 1 after being
converted into a
binary value. Read Only N/A N/A N/A
In a DEVIP MO, if
PT is not set to
LOOPINT, in the
binary value into
which MASK
cannot be set to all
1.
In the binary value
into which MASK in
the DEVIP MO is
converted, 0 is not
allowed to precede
1.
In the logical
operation result of
IP and MASK in a
DEVIP MO, neither
the network ID nor
host ID can be all 0
or 1 after being No (And no impact
converted into a on the UE in idle
binary value. Read & Write mode) N/A N/A

No (And no impact
on the UE in idle
DHCPSVRIP in a
DHCPSVRIP MO
must be a valid IP
address of class A,
it cannot be 0.x.x.x
or 127.x.x.x. Read Only N/A N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In the DIFPRI MO,

the value range of
this parameter is
from 0 to 63 if
PRIRULE is set to
DSCP.
In the DIFPRI MO,
the value range of
this parameter is Services are
from 0 to 7 if interrupted until the
PRIRULE is set to parameter is
IPPRECEDENCE. Read & Write Yes BS correctly set.
In a DIFPRI MO,
OMLOWPRI must
be smaller than or
equal to
OMHIGHPRI.
In the DIFPRI MO,
if PRIRULE is set to
DSCP, the value
range of this
parameter is from 0
to 63.
In the DIFPRI MO,
IPPRECEDENCE, Services are
the value range of interrupted until the
this parameter is parameter is
from 0 to 7. Read & Write Yes BS correctly set.
In a DIFPRI MO,
OMLOWPRI must
be smaller than or
equal to
OMHIGHPRI.
In the DIFPRI MO,
DSCP, the value
range of this
parameter is from 0
to 63.
In the DIFPRI MO,
IPPRECEDENCE, Services are
the value range of interrupted until the
this parameter is parameter is
from 0 to 7. Read & Write Yes BS correctly set.
In the DIFPRI MO,

DSCP, this
parameter can be
set to any value in
the range of 0 to
63.
In the DIFPRI MO,
IPPRECEDENCE,
this parameter can Services are
be set to any value interrupted until the
in the range of 0 to parameter is
7. Read & Write Yes BS correctly set.

In the DOT1X MO,

if SBT is set to
BASE_BOARD, this
parameter can be
set to 0 or 1.
In the DOT1X MO,
if SBT is set to
ETH_COVERBOAR
D, the value range
No (And no impact
on the UE in idle


No (And no impact
on the UE in idle
In an E1T1 MO, if
SBT is set to
BACK_BOARD, SN
and DSTSN cannot
be the same. Read Only N/A N/A N/A

No (And no impact
on the UE in idle
PPPLNK, in the
E1T1 MO, if
WORKMODE is set
to E1_BA or
E1_UNBA, TSN
must be set to a
value within the
range of TS1 to
TS31; if
WORKMODE is set
to T1, TSN must be
set to a value within
the range of TS1 to
TS24, Other
timeslots are not
used.
When bearer link is
MPLNK, in the
E1T1 MO, if
WORKMODE is set
to E1_BA or
E1_UNBA, TSN
must be set to a
value within the
range of TS1 to
TS31; if
WORKMODE is set
to T1, TSN must be
the range of TS1 to
TS24, Other
timeslots are not
used.
In the E1T1 MO,
this parameter is
valid only when PS
is set to ALLPORT. Read & Write Yes BS Less than 1 minute
an all-port E1T1
MO is set to
E1_UNBA or
E1_BA, FRAME
can be set to
E1_DOUBLE_FRA
ME,
E1_CRC4_MULTI_
FRAME or
E1_HYBRID_FRAM
E in each single-
port E1T1 MO. If
WORKMODE in an
all-port E1T1 MO is
set to T1, FRAME
can be set to
T1_SUPER_FRAM
E or
T1_EXTENDED_S
UPER_FRAME in
each single-port
E1T1 MO. If no all-
port E1T1 MO is
configured, the
default value of
WORKMODE in
each single-port
E1T1 MO is
E1_UNBA, and
FRAME can be set
to
E1_DOUBLE_FRA
ME,
E1_CRC4_MULTI_
FRAME or
E1_HYBRID_FRAM
E. Read & Write Yes BS Less than 1 minute
to E1_UNBA or
E1_BA, LNCODE
can be set to AMI or
HDB3.
In an E1T1 MO, if
PS and
WORKMODE are
set to ALLPORT
and T1,
respectively,
LNCODE can be
set to AMI or B8ZS.
If WORKMODE in
an all-port E1T1
MO is set to
E1_UNBA or
E1_BA, LNCODE
HDB3 in each
single-port E1T1
MO. If
WORKMODE in an
all-port E1T1 MO is
set to T1, LNCODE
B8ZS in each
single-port E1T1
MO. If no all-port
E1T1 MO is
configured, the
default value of
WORKMODE in
each single-port
E1T1 MO is
E1_UNBA, and
LNCODE can be
set to AMI or HDB3. Read & Write Yes BS Less than 1 minute
In an E1T1 MO, if
SBT is set to
BACK_BOARD, SN
and DSTSN cannot
be the same. Read Only N/A N/A N/A

When configuring
an E1T1 MO,
ensure that this
parameter is set to
E1_COVERBOARD
if SN is set to 0 to
5.
When configuring
an E1T1 MO,
ensure that this
parameter is set to
BASE_BOARD if
SN is set to 6 or 7.
When adding an
E1T1 MO to a
backplane, ensure
that this parameter
is set to
BACK_BOARD.
When querying an
E1T1 MO, ensure
that this parameter
is set to
E1_COVERBOARD
or BACK_BOARD if
SN is set to 0 to 5.
When querying an
E1T1 MO, ensure
that this parameter
is set to
BASE_BOARD or
BACK_BOARD if
SN is set to 6 or 7. Read Only N/A N/A N/A

No (And no impact
on the UE in idle
In the
EP2RSCGRP MO,
if MT is set to
ENDPOINT_GROU
P ,this parameter is
meaning
EPGROUPID .
In the
EP2RSCGRP MO,
if MT is set to
ENDPOINT_NODE
,this parameter is
meaning
UPPEERID . Read Only N/A N/A N/A

In the
EP2RSCGRP MO,
if SN is set to a
value in the range
of 0 to 5, this
parameter can be
set to
ETH_COVERBOAR
D or
E1_COVERBOARD
.
In the
EP2RSCGRP MO,
if SN is set to 6 or
7, this parameter
can be set to
BASE_BOARD,BA
CK_BOARD or
ETH_COVERBOAR
D. Read Only N/A N/A N/A
In the
EP2RSCGRP MO,
if SBT is set to
BASE_BOARD, this
parameter can be
set to
PPP,MPGRP,ETH
or ETHTRK.
In the
EP2RSCGRP MO,
if SBT is set to
BACK_BOARD, this
parameter can be
set to PPP or
TUNNEL.
In the
EP2RSCGRP MO,
if SBT is set to
E1_COVERBOARD
be set to PPP or
MPGRP.
In the
EP2RSCGRP MO,
if SBT is set to
ETH_COVERBOAR
D, this parameter
can be set to ETH
or ETHTRK. Read Only N/A N/A N/A
In the
EP2RSCGRP MO,
if SBT is set to
BASE_BOARD and
PT is set to
MPGRP, this
parameter can be
set to any value in
the range of 0 to 3.
In the
EP2RSCGRP MO,
if SBT is set to
BASE_BOARD and
PT is set to PPP,
this parameter can
be set to any value
15.
In the
EP2RSCGRP MO,
if SBT is set to
E1_COVERBOARD
and PT is set to
MPGRP, this
parameter can be
set to any value in
In the
EP2RSCGRP MO,
if SBT is set to
E1_COVERBOARD
and PT is set to
PPP, this
parameter can be
set to any value in
the range of 0 to
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

In the EPGROUP
MO,the parameter
PACKETFILTERS
WITCH is valid
when the protocol
of the end point
node in EPGROUP
is IPv4 verison and
the type of end
point node is Less than 60
Ethernet. Read & Write Yes BS minutes
No (And no impact
on the UE in idle
In an ETHOAM3AH
MO, this parameter
must be set to
ETH_COVERBOAR
D if SN is set to a
value within the
range of 0 to 5.
In an ETHOAM3AH
MO, this parameter
can be set to
BASE_BOARD or
ETH_COVERBOAR
In the
ETHOAM3AH MO,
this parameter can
be set to 0 or 1 if
SBT is set to
BASE_BOARD.
In the
ETHOAM3AH MO,
this parameter can
be set to a value
within the range
from 0 to 5 if SBT is
set to
ETH_COVERBOAR

In an ETHOAM3AH
MO,
ERRFRMSCDEVT
PRD must be
greater than or
equal to
ERRFRMSCDEVTT
HD. Read Only N/A N/A N/A
In an ETHOAM3AH
MO,
ERRFRMSCDEVT
PRD must be
greater than or
equal to
ERRFRMSCDEVTT
HD. Read Only N/A N/A N/A


In the ETHPORT
MO, if SN is within
the range from 0 to
5, this parameter
must be set to
ETH_COVERBOAR
D.
In the ETHPORT
MO, if SN is set to 6
or 7, this parameter
can be set to
BASE_BOARD or
ETH_COVERBOAR
In the ETHPORT
MO, this parameter
can be set to 0 or 1
if SBT is set to
BASE_BOARD.
In the ETHPORT
MO, this parameter
can be set to a
value within the
range from 0 to 5 if
SBT is set to
ETH_COVERBOAR
In the ETHPORT
MO, if SBT is set to
BASE_BOARD, this
parameter can be
set to COPPER,
FIBER or AUTO.
In the ETHPORT
ETH_COVERBOAR
D, this parameter
can be set to can
be set to COPPER, Less than 10
FIBER or AUTO. Read & Write Yes BS minutes
Services are
parameter is
set to 100M,
1000M, or AUTO.
In the ETHPORT
MO, if SBT and PA
are set to
ETH_COVERBOAR
D and AUTO,
respectively, this
parameter can be
set to 100M,
1000M, or AUTO.
In the ETHPORT
MO, if SBT and PA
are set to
BASE_BOARD and
COPPER,
respectively, this
parameter can be
set to 10M, 100M,
or AUTO.
In the ETHPORT
MO, if SBT and PA
are set to
BASE_BOARD and
FIBER,
respectively, this
parameter can be
set to 100M,
1000M, or AUTO.
In the ETHPORT
MO, if SBT and PA
are set to
BASE_BOARD and
AUTO, respectively,
this parameter must
be set to 100M, All the services
1000M, or AUTO. Read & Write Yes carried on the port Less than 1 minute
In the ETHPORT
MO, if SPEED is set
to AUTO, this
parameter must be
AUTO.
In the ETHPORT
MO, if SPEED is set
to 10M, 100M, or
1000M, this
parameter must be All the services
FULL. Read & Write Yes carried on the port Less than 1 minute
The proxy ARP
function is enabled Services are
by default in the interrupted until the
initial phase of parameter is
system startup. Read & Write Yes BS correctly set.
No (And no impact
on the UE in idle
In an ETHPORT
MO, FERAT must No (And no impact
be greater than or on the UE in idle
equal to FERDT. Read & Write mode) N/A N/A
In an ETHPORT
MO, FERAT must No (And no impact
be greater than or on the UE in idle
equal to FERDT. Read & Write mode) N/A N/A


In an ETHPORT
MO,
RXBCPKTALMOC
RTHD must be
greater than No (And no impact
RXBCPKTALMCLR on the UE in idle
THD. Read & Write mode) N/A N/A
In an ETHPORT
MO,
RXBCPKTALMOC
RTHD must be
greater than No (And no impact
RXBCPKTALMCLR on the UE in idle
THD. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle

All services over the
member ports of
None Read & Write Yes the Ethernet trunk Less than 1 minute
No (And no impact
on the UE in idle
In an ETHTRK MO,
this parameter must
be set to
ETH_COVERBOAR
D if SN is set to a
value within the
range from 0 to 5.
In an ETHTRK MO,
this parameter can
be set to
BASE_BOARD or
ETH_COVERBOAR
All services carried
on the members of
None Read & Write Yes the Ethernet trunk Less than 1 minute



In an ETHTRKLNK
MO, this parameter
can be set to a
value within the
SBT is set to
ETH_COVERBOAR
D.
In an ETHTRKLNK
MO, this parameter
if SBT is set to
BASE_BOARD. Read Only N/A N/A N/A

In an ETHTRKLNK
MO, this parameter
must be set to
ETH_COVERBOAR
D if SN is set to a
value within the
range from 0 to 5.
In an ETHTRKLNK
MO, this parameter
can be set to
BASE_BOARD or
ETH_COVERBOAR

No (And no impact
on the UE in idle
In the
FLOODDEFEND
MO, this parameter
is valid only when
DFDSW is set to
ENABLE.
In the
FLOODDEFEND
MO, if FLDTYPE is
set to ARP,
DFDTHD ranges
from 1 to 512.
In the
FLOODDEFEND
MO, if FLDTYPE is
set to ICMP or
SYN, DFDTHD
ranges from 1 to
1024.
In the
FLOODDEFEND
MO, if FLDTYPE is
set to TCP or UDP, No (And no impact
DFDTHD ranges on the UE in idle
No (And no impact
on the UE in idle
In the
FLOODDEFEND
MO, this parameter
is valid only when
ALMSW is set to
ENABLE.
In the
FLOODDEFEND
MO, if FLDTYPE is
set to ARP,
ALMTHD ranges
from 1 to 512.
In the
FLOODDEFEND
MO, if FLDTYPE is
set to ICMP or
SYN, ALMTHD
ranges from 1 to
1024.
In the
FLOODDEFEND
MO, if FLDTYPE is
set to TCP or UDP, No (And no impact
ALMTHD ranges on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle




No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In the
GTRANSPARA
MO, this parameter
BYPASSSWITCH on the UE in idle
is set to ENABLE. Read & Write mode) N/A N/A

No (And no impact
on the UE in idle
In the
GTRANSPARA
MO, this parameter
is valid only when
OMCHSWITCHBA No (And no impact
CK is set to on the UE in idle
ENABLE. Read & Write mode) N/A N/A
None Read & Write N/A N/A N/A

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
Services are
parameter is

When an IKEPEER
MO is being added,
the PEERNAME is
case-insensitive;
but when an
IKEPEER MO is
referenced, the
PEERNAME is
case-sensitive.
The value of
PEERNAME in an
IKEPEER MO must
be comprised of
ASCII characters. Read Only N/A N/A N/A
If AUTHALG in an
IKEPROPOSAL
MO is set to
AES_XCBC_96,
IKEVERSION in the
associated
IKEPEER MO
cannot be set to
IKE_V1. Read & Write Yes BS Less than 1 minute
In the IKEPEER
MO, this parameter
is valid only when
IKEVERSION is set
to IKE_V1. Read & Write Yes BS Less than 1 minute

REMOTEIP in an
IKEPEER MO must
be a valid IP
address of class A,
it cannot be set to
0.x.x.x or 127.x.x.x. Read & Write Yes BS Less than 1 minute
In the IKEPEER
MO, this parameter
is valid only when
DPD is set to
PERIODIC. Read & Write Yes BS Less than 1 minute
In the IKEPEER
MO, this parameter
is valid only when
DPD is set to
In the IKEPEER
MO, this parameter
is valid only when
DPD is set to
No (And no impact
on the UE in idle

When an
IKEPEER6 is being
added, the
PEERNAME is
case-insensitive.
When an
IKEPEER6 is
referenced, the
PEERNAME is
case-sensitive.
PEERNAME in an
IKEPEER6 MO
must contain only
ASCII characters. Read Only N/A N/A N/A
No (And no impact
on the UE in idle
If AUTHALG in an
IKEPROPOSAL
MO is set to
AES_XCBC_96,
IKEVERSION in the
associated
IKEPEER6 MO No (And no impact
cannot be set to on the UE in idle
IKE_V1. Read & Write mode) N/A N/A
In an IKEPEER6
MO, this parameter
IKEVERSION is set on the UE in idle
to IKE_V1. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
In an IKEPEER6
MO, REMOTEIP
must be set to a No (And no impact
global unicast on the UE in idle
address. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In an IKEPEER6
MO, this parameter
DPD is set to on the UE in idle
PERIODIC. Read & Write mode) N/A N/A
In an IKEPEER6
MO, this parameter
In an IKEPEER6
MO, this parameter
No (And no impact
on the UE in idle
In an IKEPEER6
MO, LOCALIP
must be set to a No (And no impact

No (And no impact
on the UE in idle
If AUTHALG in an
IKEPROPOSAL
MO is set to
AES_XCBC_96,
IKEVERSION in the
associated
IKEPEER MO
cannot be set to
IKE_V1.
If AUTHALG in an
IKEPROPOSAL
MO is set to
AES_XCBC_96,
IKEVERSION in the
associated
IKEPEER6 MO No (And no impact
cannot be set to on the UE in idle
IKE_V1. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

In an IP2RSCGRP
MO, this parameter
can be set to
E1_COVERBOARD
or
ETH_COVERBOAR
D if SN is set to a
value within the
range of 0 to 5.
In an IP2RSCGRP
MO, this parameter
can be set to
BASE_BOARD,
BACK_BOARD or
ETH_COVERBOAR
In the IP2RSCGRP
E1_COVERBOARD
be set to PPP or
MPGRP.
In the IP2RSCGRP
E1_COVERBOARD
be set to ETH or
ETHTRK.
In the IP2RSCGRP
BASE_BOARD, this
parameter can be
set to PPP,
MPGRP, ETH or
ETHTRK.
In the IP2RSCGRP
BACK_BOARD, this
parameter can be
set to PPP or
TUNNEL. Read Only N/A N/A N/A
value within the
range of 0 to 3 if PT
is set to MPGRP.
In an IP2RSCGRP
MO, this parameter
can be set to a
value within the
range of 0 to 5 if
SBT is set to
ETH_COVERBOAR
D and PT is set to
ETH.
In an IP2RSCGRP
MO, this parameter
can be set to a
value within the
range of 0 to 2 if
SBT is set to
ETH_COVERBOAR
D and PT is set to
ETHTRK.
In an IP2RSCGRP
MO, this parameter
if SBT is set to
BASE_BOARD and
PT is set to ETH or
ETHTRK.
In an IP2RSCGRP
MO, this parameter
can be set to a
value within the
range of 0 to 14 if
SBT is set to
BACK_BOARD and
PT is set to

DSTIP in an
IP2RSCGRP MO
must be a valid IP
address of class A,
it cannot be set to
0.x.x.x or 127.x.x.x.
In an IP2RSCGRP
MO, the logic AND
result of DSTIP and
DSTMASK must be
the same as
DSTIP. That is,
DSTIP must be set
to a network IP
address. Read Only N/A N/A N/A
In an IP2RSCGRP
MO, the logic AND
result of DSTIP and
DSTMASK must be
the same as
DSTIP. That is,
DSTIP must be set
to a network IP
address.
In the binary value
into which
DSTMASK in an
IP2RSCGRP MO is
converted, 0 cannot
precede 1, but the
value can be
255.255.255.255. Read Only N/A N/A N/A

In an IP2RSCGRP6
must be set to
In the
IP2RSCGRP6 MO,
if SBT is set to
BASE_BOARD, this
parameter can be
set to ETH or
ETHTRK. Read Only N/A N/A N/A
In the
IP2RSCGRP6 MO,
if SBT is set to
BASE_BOARD,
and PT is set to
ETH or ETHTRK,
this parameter can
be set to 0 or 1. Read Only N/A N/A N/A
In the
IP2RSCGRP6 MO,
DSTIPV6 must be
set to a global
unicast address. Read Only N/A N/A N/A

No (And no impact
on the UE in idle
This parameter is
valid only when
ARPSPOOFCHKS No (And no impact
W is set to on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
This parameter is
valid only when
INVALIDPKTCHKS No (And no impact
W is set to on the UE in idle
No (And no impact
on the UE in idle
This parameter is
valid only when
IPSECREPLAYCH No (And no impact
KSW is set to on the UE in idle


If PT in an IPITF6
MO is set to
LOOPIF, the
ITFTYPE cannot be
set to VLAN. Read Only N/A N/A N/A

In the IPITF6 MO, if
SN is set to 6 or 7,
this parameter can
be set to
If PT in an IPITF6
MO is set to
LOOPIF, the
ITFTYPE cannot be
set to VLAN. Read Only N/A N/A N/A
In the IPITF6 MO,

this parameter can
be set to 0 or 1 if
PT is set to ETH or
TRUNK and SBT is
set to
BASE_BOARD.
In the IPITF6 MO,
this parameter can
be set to a value
within the range of
0 to 2 if PT is set to
LOOPIF and SBT is
set to
In the IPITF6 MO,
this parameter is
valid only when
ITFTYPE is set to
VLAN. Read Only N/A N/A N/A


any value in the
range of 0 to 3.
In the IPPATH MO,
if PT is set to
LOOPINT, and
VRFIDX is not set
to 0, PN can be set
to any value in the
range of 4(VRFIDX)
+4 to 4(VRFIDX)+7.
In the IPPATH MO,
if SBT is set to
BASE_BOARD, this
parameter can be
set to PPP,
MPGRP, ETH,
ETHTRK, or
LOOPINT.
In the IPPATH MO,
if SBT is set to
BACK_BOARD, this
parameter can be
set to PPP or
TUNNEL.
In the IPPATH MO,
if SBT is set to
E1_COVERBOARD
be set to PPP or
MPGRP.
In the IPPATH MO,
if SBT is set to
ETH_COVERBOAR
D, this parameter
can be set to ETH,
ETHTRK, or
LOOPINT. Read & Write Yes BS Less than 1 minute
parameter can be
set to 0 or 1.
In the IPPATH MO,
if SBT and PT are
set to
ETH_COVERBOAR
D and ETH,
respectively, the
value of this
parameter ranges
from 0 to 5.
In the IPPATH MO,
if SBT and PT are
set to
ETH_COVERBOAR
D and ETHTRK,
respectively, the
value of this
parameter ranges
from 0 to 2.
In the IPPATH MO,
if SBT is set to
BASE_BOARD or
ETH_COVERBOAR
D and PT is set to
LOOPINT, the value
of this parameter
ranges from 0 to 3.
In the IPPATH MO,
if SBT and PT are
set to
BACK_BOARD and
TUNNEL,
respectively, the
value of this
parameter ranges
from 0 to 14. Read & Write Yes BS Less than 1 minute
No (And no impact
on the UE in idle
In the IPPATH MO,
this parameter is Services are
valid only when interrupted until the
PATHTYPE is set to parameter is
FIXED. Read & Write Yes BS correctly set.
LOCALIP in an
IPPATH MO must
be an IP address of
class A, B, or C. In
addition, it cannot
be set to 127.x.x.x
or 0.x.x.x (including
0.0.0.0).
In an IPPATH MO,
LOCALIP must be
different from
PEERIP.
In an IPPATH MO,
if LOCALIP is set to
0.0.0.0, PT must be
set to PPP or
MPGRP. Read & Write Yes BS Less than 1 minute
PEERIP in an
IPPATH MO must
be an IP address of
class A, B, or C. In
addition, it cannot
be set to 127.x.x.x
or 0.x.x.x.
In an IPPATH MO,
LOCALIP must be
different from
PEERIP. Read & Write Yes BS Less than 1 minute
No (And no impact
on the UE in idle
Services are
Interface S1 and path check is
None Read & Write Yes services in the cell disabled.
In the IPPATH MO,

this parameter is
PATHTYPE is set to on the UE in idle
FIXED. Read & Write mode) N/A N/A
In the IPPATH MO,

this parameter is
IPMUXSWITCH is on the UE in idle
set to ENABLE. Read & Write mode) N/A N/A
In an IPPATH MO,
if IPMUXSWITCH is
set to ENABLE, the
difference between
FRAMELEN and
SUBFRAMELEN
must be larger than
4.
In the IPPATH MO,
this parameter is
In an IPPATH MO,
if IPMUXSWITCH is
set to ENABLE, the
difference between
FRAMELEN and
SUBFRAMELEN
must be larger than
4.
In the IPPATH MO,
this parameter is


In the IPPATH MO,
this parameter is
valid only when
JNRSCGRP is set
to ENABLE. Read & Write Yes BS Less than 1 minute
No (And no impact
on the UE in idle
In an IPPATH MO,
this parameter can
be set to
E1_COVERBOARD
or
ETH_COVERBOAR
D if SN is set to a
value within the
range of 0 to 5.
In an IPPATH MO,
this parameter can
be set to
BASE_BOARD or
ETH_COVERBOAR
In the IPPATH MO,
if PT and VRFIDX
are set to LOOPINT
and 0, respectively,
PN can be set to
any value in the
range of 0 to 3.
In the IPPATH MO,
if PT is set to
LOOPINT, and
VRFIDX is not set
to 0, PN can be set
to any value in the
range of 4(VRFIDX)
+4 to 4(VRFIDX)+7. Read & Write Yes BS Less than 1 minute
In an IPPATH MO,
if PT is set to
LOOPINT,
JNRSCGRP cannot
be set to ENABLE. Read & Write Yes BS Less than 1 minute

In the IPPATH6
MO, this parameter
is valid only when
JNRSCGRP is set
to ENABLE. Read Only N/A N/A N/A

In the IPPATH6
MO, this parameter
is valid only when
PATHTYPE is set to
FIXED. Read Only N/A N/A N/A
In an IPPATH6 MO,
LOCALIP6 and
PEERIP6 cannot be
the same.
In an IPPATH6 MO,
LOCALIP6 must be
set to a global
In an IPPATH6 MO,
LOCALIP6 and
PEERIP6 cannot be
the same.
In an IPPATH6 MO,
PEERIP6 must be
set to a global
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
SRCIP in an
IPPATHRT MO
must be a valid IP
address of class A,
it cannot be set to
0.x.x.x or 127.x.x.x.
In an IPPATHRT
MO, SRCIP must
be different from
DSTIP. Read Only N/A N/A N/A
DSTIP in an
IPPATHRT MO
must be a valid IP
address of class A,
it cannot be set to
0.x.x.x or 127.x.x.x.
In an IPPATHRT
MO, SRCIP must
be different from
DSTIP. Read Only N/A N/A N/A
NEXTHOPIP in an
IPPATHRT MO
must be a valid IP
address of class A,
it cannot be set to
0.x.x.x or 127.x.x.x. Read Only N/A N/A N/A
In an
IPPMSESSION
MO, if BINDPATH is
set to NO,
LOCALIP must be
a valid IP address
of class A, B, or C.
In addition, it
cannot be set to
In an
IPPMSESSION
MO, if BINDPATH is
set to NO,
LOCALIP must be
different from
PEERIP. Read Only N/A N/A N/A
In an
IPPMSESSION
MO, if BINDPATH is
set to NO, PEERIP
must be a valid IP
address of class A,
it cannot be set to
In an
IPPMSESSION
MO, if BINDPATH is
set to NO,
LOCALIP must be
different from
PEERIP. Read Only N/A N/A N/A
In the
IPPMSESSION
MO, this parameter
is valid only when
IPPMTYPE is set to
FOUR_TUPLE. Read Only N/A N/A N/A
This parameter is
valid only when
IppmUpActState in
an IPPMSESSION
MO is set to PMUP. Read Only N/A N/A N/A
This parameter is
valid only when
IppmDownActStat
e in an
IPPMSESSION MO
is set to PMUP. Read Only N/A N/A N/A
This parameter is
valid only when
IppmDownActStat
e in an
IPPMSESSION MO
This parameter is
valid only when
IppmDownActStat
e in an
IPPMSESSION MO
This parameter is
valid only when
IppmUpActState in
an IPPMSESSION
MO is set to PMUP. Read Only N/A N/A N/A

In the
IPPMSESSION
MO, this parameter
is valid only when
BINDPATH is set to

In an IPRT MO, this

parameter can be
set to
BACK_BOARD,
E1_COVERBOARD
or
ETH_COVERBOAR
D,
UNCHANNELLED_
COVERBOARD if
SN is set to a value
within the range
from 0 to 5.
In an IPRT MO, this
parameter can be
set to
BASE_BOARD,
BACK_BOARD, or
ETH_COVERBOAR
In an IPRT MO, this
parameter can be
set to PPP or
MPGRP if SBT is
set to
BASE_BOARD or
E1_COVERBOARD
and RTTYPE is set
to IF.
In an IPRT MO, this
parameter must be
set to IPOA if SBT
is set to
UNCHANNELLED_
COVERBOARD
and RTTYPE is set
to IF.
In an IPRT MO, this
parameter must be
set to TUNNEL,
IPOA if SBT is set
to BACK_BOARD,
RTTYPE is set to IF
and SN is set to 0
or 5.
In an IPRT MO, this
parameter must be
set to PPP,
TUNNEL, IPOA if
SBT is set to
BACK_BOARD,
RTTYPE is set to IF
and SN is set to 6
or 7. Read & Write Yes BS Less than 1 minute
In the IPRT MO,
this parameter is
valid only when
RTTYPE is set to
IF.
In the IPRT MO, if
SBT is set to
BACK_BOARD and
IFT is set to PPP,
this parameter can
be set to 0 to 15.
In the IPRT MO, if
SBT is set to
BASE_BOARD or
E1_COVERBOARD
and IFT is set to
PPP, this parameter
can be set to 0 to
15.
In the IPRT MO, if
IFT is set to
MPGRP, this
parameter can be
set to 0 to 3.
In the IPRT MO, if
SBT is set to
BACK_BOARD and
IFT is set to
TUNNEL, the value
range of this
parameter is from 0
to 14. Read & Write Yes BS Less than 1 minute
In the IPRT MO, if
VRFIDX is set to a
value in the range
of 1 to 7, RTTYPE
cannot be set to IF.
In an IPRT MO, this
parameter must be
set to NEXTHOP if
SBT is set to
ETH_COVERBOAR
D.
In an IPRT MO, this
parameter must be
set to IF if SBT is
set to
E1_COVERBOARD
.
In an IPRT MO, this
parameter can be
set to NEXTHOP or
IF if SBT is set to
BASE_BOARD.
In an IPRT MO, this
parameter must be
set to If if SBT is
set to
BACK_BOARD.
In an IPRT MO, this
parameter must be
set to If if SBT is
set to
UNCHANNELLED_
COVERBOARD. Read & Write Yes BS Less than 1 minute
In the IPRT MO, if

VRFIDX is set to a
value in the range
of 1 to 7, RTTYPE
cannot be set to IF. Read & Write Yes BS Less than 1 minute
DSTIP in an IPRT
MO must be a valid
IP address of class
A, B, or C. It can be
set to 0.0.0.0, but
cannot be set to
0.x.x.x or 127.x.x.x.
If one of DSTMASK
and DSTIP in an
IPRT MO is set to
0.0.0.0, the other
must be set to
0.0.0.0, too.
The result of DSTIP
AND DSTMASK in
an IPRT MO must
be equal to DSTIP.
That is, DSTIP must
be set to a network
IP address. Read & Write Yes BS Less than 1 minute
In the binary value

converted from
DSTMASK in an
IPRT MO, 0 is not
allowed to precede
1. DSTMASK can
be set to 0.0.0.0 or
255.255.255.255.
If one of DSTMASK
and DSTIP in an
IPRT MO is set to
0.0.0.0, the other
must be set to
0.0.0.0, too.
The result of DSTIP
AND DSTMASK in
an IPRT MO must
be equal to DSTIP.
That is, DSTIP must
be set to a network
IP address. Read & Write Yes BS Less than 1 minute
NEXTHOP in an
IPRT MO must be a
valid IP address of
Class A, B, or C. In
addition, it cannot
be set to 127.x.x.x,
0.x.x.x, or
255.255.255.255.
In the IPRT MO,
this parameter is
valid only when
RTTYPE is set to
NEXTHOP. Read & Write Yes BS Less than 1 minute
No (And no impact
on the UE in idle

In an IPRT6 MO,
DSTIP must be set
to 0 or a global
unicast address.
In an IPRT6 MO,
DSTIP and
PFXLEN must be
both 0 or a value
other than 0. Read Only N/A N/A N/A
In an IPRT6 MO,
DSTIP and
PFXLEN must be
both 0 or a value
other than 0. Read Only N/A N/A N/A

In an IPRT6 MO,
NEXTHOPIP must
match
NEXTHOPIP6TYPE
. Read Only N/A N/A N/A

No (And no impact
on the UE in idle

In the IPSECBIND
MO, if SN is within
the range from 0 to
5, this parameter
must be set to
ETH_COVERBOAR
D.
In the IPSECBIND
can be set to
BASE_BOARD or
ETH_COVERBOAR
In the IPSECBIND
MO, this parameter
is valid only when
SBT is set to
In an IPSECBIND
MO, this parameter
if SBT is set to
BASE_BOARD and
PT is set to ETH or
ETHTRK.
In an IPSECBIND
MO, this parameter
can be set to a
value within the
range of 0 to 5 if
SBT is set to
ETH_COVERBOAR
D and PT is set to
ETH.
In an IPSECBIND
MO, this parameter
can be set to a
value within the
range of 0 to 2 if
SBT is set to
ETH_COVERBOAR
D and PT is set to

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In the IPSECDTNL
MO, only one of the
following parameter
groups can be the
same: MSPGN and No (And no impact
SSPGN; MSPSN on the UE in idle
and SSPSN. Read & Write mode) N/A N/A
In the IPSECDTNL
MO, only one of the
following parameter
groups can be the
In the IPSECDTNL
MO, only one of the
following parameter
groups can be the
In the IPSECDTNL
MO, only one of the
following parameter
groups can be the
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
When an
IPSECPOLICY is
being added, the
SPGN is case-
insensitive. When
an IPSECPOLICY
is referenced, the
SPGN is case-


In the
IPSECPOLICY MO,
this parameter is
valid only when
LTCFG is set to
LOCAL. Read & Write Yes BS Less than 1 minute
In the
IPSECPOLICY MO,
this parameter is
valid only when
LTCFG is set to
LOCAL. Read & Write Yes BS Less than 1 minute
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
When an
IPSECPOLICY6 is
being added, the
SPGN is case-
insensitive. When
an IPSECPOLICY6
is referenced, the
SPGN is case-
No (And no impact
on the UE in idle
In an
IPSECPOLICY6
MO, this parameter
ACLTYPE is set to on the UE in idle
IPV4. Read & Write mode) N/A N/A
In an
IPSECPOLICY6
MO, this parameter
ACLTYPE is set to on the UE in idle
IPV6. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In an
IPSECPOLICY6
MO, this parameter
LTCFG is set to on the UE in idle
LOCAL. Read & Write mode) N/A N/A
In an
IPSECPOLICY6
MO, this parameter
LTCFG is set to on the UE in idle
LOCAL. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
When an
IPSECPROPOSAL
is added, the
PROPNAME is
case-insensitive.
When an
IPSECPROPOSAL
is referenced by
other objects,
however, the name
is case-sensitive. Read Only N/A N/A N/A
No (And no impact
on the UE in idle
In the
IPSECPROPOSAL
MO, TRANMODE is
set to ESP or
AH_ESP,
ESPAUTHALG and
ESPENCALG No (And no impact
cannot be both set on the UE in idle
to NULL. Read & Write mode) N/A N/A
In the
IPSECPROPOSAL
MO, this parameter
TRANMODE is set on the UE in idle
to AH or AH_ESP. Read & Write mode) N/A N/A
In an
IPSECPROPOSAL
MO, if TRANMODE
is set to ESP or
AH_ESP,
ESPAUTHALG and
ESPENCALG
cannot be both set
to NULL.
In the
IPSECPROPOSAL
MO, this parameter
to ESP or AH_ESP. Read & Write mode) N/A N/A
In an
IPSECPROPOSAL
MO, if TRANMODE
is set to ESP or
AH_ESP,
ESPAUTHALG and
ESPENCALG
cannot be both set
to NULL.
In the
IPSECPROPOSAL
MO, this parameter
to ESP or AH_ESP. Read & Write mode) N/A N/A

In the
LLDPGLOBAL
MO, DELAY must
be smaller than or
equal to one fourth No (And no impact
of the value of on the UE in idle
TXINTVAL. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In the
LLDPGLOBAL
MO, DELAY must
be smaller than or
equal to one fourth No (And no impact
of the value of on the UE in idle
TXINTVAL. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle




In the LLDPLOCAL
BASE_BOARD,
this parameter can
be set to any value
in the range from 0
to 1.
In the LLDPLOCAL
ETH_COVERBOAR
D, and PT is set to
ETH, this
parameter can be
set to any value in
the range from 0 to
5.
In the LLDPLOCAL
ETH_COVERBOAR
D, and PT is set to
ETHTRK, this
parameter can be
set to any value in
the range from 0 to
No (And no impact
on the UE in idle
None Read Only mode) N/A N/A


In the LLDPLOCAL
MO, if SN is within
the range from 0 to
5, this parameter
must be set to
E1_COVERBOARD
.
In the LLDPLOCAL
can be set to
BASE_BOARD or
E1_COVERBOARD
. Read Only N/A N/A N/A



In the LLDPLOCAL
MO, this parameter
is valid only when
BNDVLAN is set to
In the LLDPLOCAL
MO, this parameter
is valid only when
BNDVLAN is set to
YES. Read & Write N/A N/A N/A
No (And no impact
on the UE in idle

IP in the LOCALIP
MO must be set to
a valid IP address
of Class A, B, or C.
In addition, it
cannot be 127.x.x.x
or 0.x.x.x.
In a LOCALIP MO,
neither the network
ID nor the host ID
can be all 0 or 1 in
the logical No (And no impact
operation result of on the UE in idle
IP and MASK. Read & Write mode) N/A N/A
In the binary value

converted from
MASK in the
LOCALIP MO, 0 is
not allowed to
precede 1. MASK
cannot be 0.0.0.0 or
255.255.255.255.
In a LOCALIP MO,
neither the network
ID nor the host ID
the logical No (And no impact
In a LOCALIP6
MO, IP6 must be a
link-local address
whose prefix is
greater than or
equal to 10, or be a No (And no impact
No (And no impact
on the UE in idle

In the LR MO, if
SBT is set to
E1_COVERBOARD
, this parameter
must be set to
MPGRP.
In the LR MO, if
SBT is set to
ETH_COVERBOAR
D, this parameter
can be set to ETH
or ETHTRK.
In the LR MO, if
SBT is set to
BASE_BOARD, this
parameter can be
set to MPGRP, ETH
or ETHTRK.
In the LR MO, if
SBT is set to
BACK_BOARD, this
parameter must be
set to TUNNEL. Read Only N/A N/A N/A
In the LR MO, this
parameter can be
the range of 0 to 3 if
PT is set to
MPGRP.
In an LR MO, this
parameter can be
the range of 0 to 14
if PT is set to
TUNNEL.
In the LR MO, this
parameter can be
PT is set to ETH
and SBT is set to
ETH_COVERBOAR
D.
In the LR MO, this
parameter can be
PT is set to
ETHTRK and SBT
is set to
ETH_COVERBOAR
D.
In the LR MO, this
parameter can be
set to 0 or 1 if PT is
set to ETH or
ETHTRK and SBT
is set to
No (And no impact
on the UE in idle
In the LR MO, this

parameter can be
the range of 32 to
31744 if PT is set to
MPGRP.
In the LR MO, this
parameter can be
the range of 32 to
1000000 if PT is set
to TUNNEL.
In the LR MO, this
parameter can be
the range of 32 to
to ETH or ETHTRK
and SBT is set to
ETH_COVERBOAR
D.
In the LR MO, this
parameter can be
the range of 32 to
to ETH or ETHTRK No (And no impact
and SBT is set to on the UE in idle
BASE_BOARD. Read & Write mode) N/A N/A
In the LR MO, this
parameter can be
the range of 32 to
155000 if PT is set
to MPGRP.
In the LR MO, this
parameter can be
the range of 32 to
to TUNNEL.
In the LR MO, this
parameter can be
the range of 32 to
to ETH or ETHTRK
and SBT is set to
ETH_COVERBOAR
D.
In the LR MO, this
parameter can be
the range of 32 to
In the LR MO, this
parameter can be
the range of 0 to
155000 if PT is set
to MPGRP.
In the LR MO, this
parameter can be
the range of 0 to
to TUNNEL.
In the LR MO, this
parameter can be
the range of 0 to
to ETH or ETHTRK
and SBT is set to
ETH_COVERBOAR
D.
In the LR MO, this
parameter can be
the range of 0 to
In an LR MO, this
parameter can be
set to
E1_COVERBOARD
or
ETH_COVERBOAR
D if SN is set to a
value within the
range of 0 to 5.
In an LR MO, this
parameter can be
set to
BASE_BOARD,
BACK_BOARD, or
ETH_COVERBOAR
In the LR MO, this
parameter can be
the range of 32 to
MPGRP.
In the LR MO, this
parameter can be
the range of 32 to
to TUNNEL.
In the LR MO, this
parameter can be
the range of 32 to
to ETH or ETHTRK
and SBT is set to
ETH_COVERBOAR
D.
In the LR MO, this
parameter can be
the range of 32 to


In the MPGRP MO,
this parameter is
valid only when
AUTH is set to PAP
or CHAP. Read & Write Yes BS Less than 1 minute
In the MPGRP MO,
this parameter is
valid only when
AUTH is set to PAP
LOCALIP in an
MPGRP MO must
be a valid IP
address of class A,
it cannot be set to
the reserved IP
addresses 0.x.x.x
or 127.x.x.x but can
be set to 0.0.0.0.
In the MPGRP MO,
IPMASK cannot be
all 0 if LOCALIP is
not all 0.
In an MPGRP MO,
neither the network
ID nor the host ID
the logical
operation result of
LOCALIP and
IPMASK.
In an MPGRP MO,
LOCALIP must be
different from
PEERIP.
In the MPGRP MO,
IPMASK must be
all 0 if LOCALIP is
all 0. Read & Write Yes BS Less than 1 minute
IPMASK in the
MPGRP MO must
be valid, that is, 0 is
not allowed to
precede 1. In
addition, it can be
set to 0.0.0.0 or
255.255.255.255.
In the MPGRP MO,
IPMASK cannot be
all 0 if LOCALIP is
not all 0.
In an MPGRP MO,
neither the network
ID nor the host ID
the logical
operation result of
LOCALIP and
IPMASK.
In the MPGRP MO,
IPMASK must be
all 0 if LOCALIP is
all 0. Read & Write Yes BS Less than 1 minute
PEERIP in an
MPGRP MO must
be a valid IP
address of class A,
it cannot be set to
the reserved IP
addresses 0.x.x.x
be set to 0.0.0.0.
In an MPGRP MO,
LOCALIP must be
different from
In the MPGRP MO,
this parameter is
valid only when
MCPPP is set to
ENABLE. Read & Write Yes BS Less than 1 minute
No (And no impact
on the UE in idle
In the MPGRP MO,

MAXMFLEN must
be larger than
MAXSFLEN and
the minimum
difference is 2.
In the MPGRP MO,
this parameter is
valid only when
MUXCP is set to
In the MPGRP MO,
MAXMFLEN must
be larger than
MAXSFLEN and
the minimum
difference is 2.
In the MPGRP MO,
this parameter is
valid only when
MUXCP is set to
In the MPGRP MO,

this parameter is
valid only when
MUXCP is set to
In the MPGRP MO,

if MCPPP and MHO
are set to ENABLE
and LONG,
respectively, this
parameter can be
set to 4 or 8 and the
default value is 8.
In the MPGRP MO,
if MCPPP and MHO
are set to ENABLE
and SHORT,
respectively, this
parameter must be
set to 4 and the
default value is 4. Read & Write Yes BS Less than 1 minute
In the MPGRP MO,

MPDAAT must be No (And no impact
greater than or on the UE in idle
equal to MPDADT. Read & Write mode) N/A N/A
In the MPGRP MO,

MPDAAT must be No (And no impact
equal to MPDADT. Read & Write mode) N/A N/A
In the MPGRP MO,
this parameter is
valid only when
IPHC is set to


In the MPGRP MO,

if the value of SN is
within the range
from 0 to 5, this
parameter must be
set to
E1_COVERBOARD
.
In the MPGRP MO,
7, this parameter
must be set to
In an MPLNK MO,
SRN must be the
same as E1T1SRN. Read Only N/A N/A N/A
In an MPLNK MO,
if SBT is set to
BACK_BOARD,
E1T1SN must be
the same as SN. Read Only N/A N/A N/A

This parameter can
be set to any value
In an MPLNK MO,
SRN must be the
same as E1T1SRN. Read Only N/A N/A N/A
In an MPLNK MO,
if SBT is set to
BACK_BOARD,
E1T1SN must be
the same as SN.
In the MPLNK MO,
if SBT is set to
BASE_BOARD, the
value range of this
parameter is from 0
to 7.
In the MPLNK MO,
if SBT is set to
BACK_BOARD, this
parameter can be
set to 6 or 7.
In the MPLNK MO,
if SBT is set to
E1_COVERBOARD
, the value range of
this parameter is
In the MPLNK MO,
if SBT is set to
BASE_BOARD, the
value range of this
parameter is from 0
to 3.
In the MPLNK MO,
if SBT is set to
BACK_BOARD, the
value range of this
parameter is from 0
to 7.
In the MPLNK MO,
if SBT is set to
E1_COVERBOARD
, the value range of
this parameter is
When bearer link is

MPLNK, in the
E1T1 MO, if
WORKMODE is set
to E1_BA or
E1_UNBA, TSN
must be set to a
value within the
range of TS1 to
TS31; if
WORKMODE is set
to T1, TSN must be
the range of TS1 to
TS24, Other
timeslots are not
used. Read Only N/A N/A N/A
In an MPLNK MO,
if E1T1SN is the
same as SN,
E1T1SBT must be
the same as SBT.
In the MPLNK MO,
if the value of SN is
within the range
from 0 to 5, this
parameter must be
set to
E1_COVERBOARD
.
In the MPLNK MO,
7, this parameter
can be set to
BASE_BOARD or
BACK_BOARD. Read Only N/A N/A N/A
In the MPLNK MO,
if SN is within the
range from 0 to 5
and SBT is set to
E1_COVERBOARD
, this parameter
must be set to
E1_COVERBOARD
.
In the MPLNK MO,
if SN is set to 6 or 7
and SBT is set to
BASE_BOARD, this
parameter must be
set to
BASE_BOARD.
In the MPLNK MO,
if SN is set to 6 or 7
and SBT is set to
BACK_BOARD, this
parameter must be
set to

In an MPLNK MO,
if E1T1SN is the
same as SN,
E1T1SBT must be
the same as SBT.
In the MPLNK MO,
if E1T1SN is within
the range from 0 to
5, this parameter
must be set to
E1_COVERBOARD
.
In the MPLNK MO,
if E1T1SN is set to
6 or 7 and SBT is
set to
BASE_BOARD, this
parameter must be
set to
BASE_BOARD.
In the MPLNK MO,
if E1T1SN is set to
6 or 7 and SBT is
set to
BACK_BOARD, this
parameter must be
set to
BACK_BOARD.
In the MPLNK MO,
if E1T1SN is set to
6 or 7 and SBT is
set to
E1_COVERBOARD
, this parameter
must be set to

IP in the OMCH MO
must be a valid IP
address of Class A,
B, or C, and cannot
be set to 127.X.X.X
or 0.X.X.X.
In an OMCH MO, if
MASK is set to a
value other than
255.255.255.255,
neither the network
ID nor the host ID
can be all 0 or all 1
in the logical
operation result of
IP and MASK.
In an OMCH MO, IP No (And no impact
must be different on the UE in idle
from PEERIP. Read & Write mode) N/A N/A
MASK in an OMCH
MO must be set to
a valid mask (0 is
not allowed to
precede 1). In an
OMCH MO, this
parameter can be
set to
255.255.255.255
when BEAR is set
to IPV4.
In an OMCH MO, if
MASK is set to a
value other than
255.255.255.255,
neither the network
ID nor the host ID
in the logical No (And no impact
PEERIP in the
OMCH MO must be
a valid IP address
of Class A, B, or C,
and cannot be set
to 127.X.X.X or
0.X.X.X.
In an OMCH MO, if
PEERMASK is not
set to
255.255.255.255,
neither the network
ID nor the host ID
in the logical
operation result of
PEERIP and
PEERMASK.
In an OMCH MO, IP No (And no impact
must be different on the UE in idle
from PEERIP. Read & Write mode) N/A N/A
PEERMASK in an
OMCH MO must be
set to a valid mask
(0 is not allowed to
precede 1). In an
OMCH MO, this
parameter can be
set to
255.255.255.255
when BEAR is set
to IPV4.
In an OMCH MO, if
PEERMASK is not
set to
255.255.255.255,
neither the network
ID nor the host ID
in the logical
operation result of No (And no impact
PEERIP and on the UE in idle
PEERMASK. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In the OMCH MO,

this parameter is
valid only when
BRT is set to YES.
That is, the route
specified by this
parameter is one to
the M2000 and it is
recommended that
the route be used
only by the OMCH
MO. Read Only N/A N/A N/A
In the OMCH MO,
this parameter is
valid only when
BEAR is set toIPv4 No (And no impact
and BRT is set to on the UE in idle
YES. Read & Write mode) N/A N/A
In the OMCH MO,

this parameter is
valid only when
BINDSECONDARY
RT is set to YES.
That is, the route
specified by this
parameter is one to
the M2000 and it is
recommended that
the route be used
only by the OMCH
In the OMCH MO,
this parameter is
BEAR is set to on the UE in idle
IPv4. Read & Write mode) N/A N/A
In the OMCH MO,

this parameter is
valid only when
CHECKTYPE is set
to UDPSESSION. Read Only N/A N/A N/A
In an OMCH6 MO,
LOCALIP6 must be
set to a global
unicast address.
In the OMCH6 MO,
LOCALIP6 cannot
be the same as
PEERIP6. Read Only N/A N/A N/A
In an OMCH6 MO,
PEERIP6 must be
set to a global
unicast address.
In the OMCH6 MO,
LOCALIP6 cannot No (And no impact
be the same as on the UE in idle
PEERIP6. Read & Write mode) N/A N/A

D and PT is set to
ETH.
In a
PACKETFILTER
MO, this parameter
can be set to any
value within the
range of 0 to 2 if
SBT is set to
ETH_COVERBOAR
D and PT is set to
ETHTRK.
In a
PACKETFILTER
MO, this parameter
if SBT is set to
BASE_BOARD and
PT is set to ETH or
ETHTRK.
In a
PACKETFILTER
MO, this parameter
can be set to 0 to
63 if SBT is set to
BASE_BOARD and
PT is set to SUBIF.
In a
PACKETFILTER
MO, this parameter
can be set to any
value within the
range of 0 to 14 if
SBT is set to
BACK_BOARD and
PT is set to
This parameter is
valid only when FM
is set to ADV_ACL
or ADV_AND_L2. Read Only N/A N/A N/A

In a
PACKETFILTER
MO, this parameter
must be set to
ETH_COVERBOAR
D if SN is set to a
value within the
range of 0 to 5.
In a
PACKETFILTER
MO, this parameter
can be set to
BASE_BOARD,
ETH_COVERBOAR
D, or
BACK_BOARD if
SN is set to 6 or 7. Read Only N/A N/A N/A


This parameter is
valid only when FM
is set to L2_ACL or
ADV_AND_L2. Read Only N/A N/A N/A
IP in a
PINGFILTER MO
must be a valid IP
address of class A,
it cannot be set to
In the binary value

into which MASK in
a PINGFILTER MO
is converted, 0
cannot precede 1.
In addition, MASK
can be
255.255.255.255,
but cannot be
0.0.0.0. Read Only N/A N/A N/A
In an
PLRTHRESHOLD
MO, PLRDT must No (And no impact
be smaller than or on the UE in idle
equal to PLRAT. Read & Write mode) N/A N/A
In an
PLRTHRESHOLD
MO, PLRDT must No (And no impact
equal to PLRAT. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

In a
PORTSECURITY
MO, this parameter
can be set to
E1_COVERBOARD
or
ETH_COVERBOAR
D if SN is set to a
value within the
range from 0 to 5.
In a
PORTSECURITY
MO, this parameter
can be set to
BASE_BOARD or
ETH_COVERBOAR
In a
PORTSECURITY
MO, this parameter
can be set to ETH
or E1T1 if SBT is
set to
BASE_BOARD.
In a
PORTSECURITY
MO, this parameter
must be set to
E1T1 if SBT is set
to
E1_COVERBOARD
.
In a
PORTSECURITY
MO, this parameter
must be set to ETH
if SBT is set to
ETH_COVERBOAR
In the
PORTSECURITY
MO, this parameter
if SBT is set to
BASE_BOARD and
PT is set to ETH.
In the
PORTSECURITY
MO, this parameter
can be set to a
value within the
SBT is set to
BASE_BOARD and
PT is set to E1T1.
In the
PORTSECURITY
MO, this parameter
can be set to a
value within the
SBT is set to
E1_COVERBOARD
and PT is set to
E1T1.
In the
PORTSECURITY
MO, this parameter
can be set to a
value within the
SBT is set to
ETH_COVERBOAR
D and PT is set to
ETH. Read Only N/A N/A N/A
No (And no impact
on the UE in idle

In the PPPLNK
BASE_BOARD, this
parameter can be
set to 0 to 3.
In the PPPLNK
BACK_BOARD or
E1_COVERBOARD
be set to 0 to 7. Read & Write Yes BS Less than 1 minute
In the PPPLNK
MO, this parameter
is valid only when
AUTH is set to PAP
In the PPPLNK
MO, this parameter
is valid only when
AUTH is set to PAP
When bearer link is
PPPLNK, in the
E1T1 MO, if
WORKMODE is set
to E1_BA or
E1_UNBA, TSN
must be set to a
value within the
range of TS1 to
TS31; if
WORKMODE is set
to T1, TSN must be
the range of TS1 to
TS24, Other
timeslots are not
used. Read & Write Yes BS Less than 1 minute
LOCALIP in a
PPPLNK MO must
be a valid IP
address of class A,
it cannot be set to
the reserved IP
addresses 0.x.x.x
be set to 0.0.0.0.
In the PPPLNK
MO, IPMASK
cannot be set to
0.0.0.0 if LOCALIP
is not set to 0.0.0.0.
In the PPPLNK
MO, IPMASK must
be set to 0.0.0.0 if
LOCALIP is set to
0.0.0.0.
In a PPPLNK MO,
LOCALIP must be
different from
PEERIP.
In the logical
operation result of
LOCALIP and
IPMASK in a
PPPLNK MO,
neither the network
ID nor host ID can
be all 0 or 1 after
being converted
into a binary value. Read & Write Yes BS Less than 1 minute
IPMASK in the
PPPLNK MO must
be valid, that is, 0 is
not allowed to
precede 1. In
addition, it can be
set to 0.0.0.0 or
255.255.255.255.
In the PPPLNK
MO, IPMASK
cannot be set to
0.0.0.0 if LOCALIP
is not set to 0.0.0.0.
In the PPPLNK
MO, IPMASK must
be set to 0.0.0.0 if
LOCALIP is set to
0.0.0.0.
In the logical
operation result of
LOCALIP and
IPMASK in a
PPPLNK MO,
neither the network
ID nor host ID can
be all 0 or 1 after
being converted
into a binary value. Read & Write Yes BS Less than 1 minute
PEERIP in a
PPPLNK MO must
be a valid IP
address of class A,
it can be set to
0.0.0.0, but cannot
be set to the
reserved IP
addresses 0.x.x.x
or 127.x.x.x.
In a PPPLNK MO,
LOCALIP must be
different from
In the PPPLNK
MO, MAXMFLEN
must be larger than
MAXSFLEN and
the minimum
difference is 2.
In the PPPLNK
MO, this parameter
is valid only when
MUXCP is set to
In the PPPLNK
MO, MAXMFLEN
must be larger than
MAXSFLEN and
the minimum
difference is 2.
In the PPPLNK
MO, MRU must be
greater than or
equal to
MAXMFLEN.
In the PPPLNK
MO, this parameter
is valid only when
MUXCP is set to
In the PPPLNK
MO, this parameter
is valid only when
MUXCP is set to

In the PPPLNK
MO, this parameter
is valid only when
IPHC is set to
In the PPPLNK
MO, MRU must be
greater than or
equal to
MAXMFLEN. Read & Write Yes BS Less than 1 minute

No (And no impact
on the UE in idle


In the PPPLNK
MO, FFDPHOLD No (And no impact
must be smaller on the UE in idle
than FFAPHOLD. Read & Write mode) N/A N/A
In the PPPLNK
MO, FFDPHOLD No (And no impact
than FFAPHOLD. Read & Write mode) N/A N/A
In the PPPLNK
MO, if the value of
SN is within the
range from 0 to 5,
this parameter must
be set to
E1_COVERBOARD
.
In the PPPLNK
can be set to
BASE_BOARD or
BACK_BOARD. Read Only N/A N/A N/A
In a PRI2QUE MO,
PRI0 must be No (And no impact
equal to PRI1. Read & Write mode) N/A N/A
In a PRI2QUE MO,
PRI0 must be
greater than or
equal to PRI1.
In a PRI2QUE MO,
In a PRI2QUE MO,
PRI1 must be
greater than or
equal to PRI2.
In a PRI2QUE MO,
In a PRI2QUE MO,
PRI2 must be
greater than or
equal to PRI3.
In a PRI2QUE MO,
In a PRI2QUE MO,
PRI3 must be
greater than or
equal to PRI4.
In a PRI2QUE MO,
In a PRI2QUE MO,
PRI4 must be
greater than or
equal to PRI5.
In a PRI2QUE MO,
In a PRI2QUE MO,

of 0 to 5 and BEAR
is set to ATM, this
parameter can be
set to
E1_COVERBOARD
or
UNCHANNELLED_
COVERBOARD.
In the RSCGRP
MO, if SN is set to a
value in the range
of 0 to 5 and BEAR
is set to IP, this
parameter can be
set to
E1_COVERBOARD
or
ETH_COVERBOAR
D.
In the RSCGRP
or 7 and BEAR is
set to ATM, this
parameter can be
set to
BASE_BOARD,
BACK_BOARD.
In the RSCGRP
or 7 and BEAR is
set to IP, this
parameter can be
set to
BASE_BOARD,
BACK_BOARD, or
ETH_COVERBOAR
In the RSCGRP
MO, if BEAR and
SBT are set to IP
and
BASE_BOARD,
respectively, this
parameter can be
set to PPP,
MPGRP, ETH or
ETHTRK.
In the RSCGRP
MO, if BEAR and
SBT are set to IP
and
BACK_BOARD,
respectively, this
parameter can be
set to PPP or
TUNNEL.
In the RSCGRP
MO, if BEAR and
SBT are set to IP
and
E1_COVERBOARD
, respectively, this
parameter can be
set to PPP or
MPGRP.
In the RSCGRP
MO, if BEAR and
SBT are set to IP
and
ETH_COVERBOAR
D, respectively, this
parameter can be
set to ETH or
are set to
BASE_BOARD and
ETH, respectively,
this parameter can
be set to 0 or 1.
In the RSCGRP
MO, if SBT and PT
are set to
BASE_BOARD and
ETHTRK,
respectively, this
parameter can be
set to 0 or 1.
In the RSCGRP
MO, if SBT and PT
are set to
ETH_COVERBOAR
D and ETH,
respectively, this
parameter can be
set to any value in
In the RSCGRP
MO, if SBT and PT
are set to
ETH_COVERBOAR
D and ETHTRK,
respectively, this
parameter can be
set to 0 or 2.
In the RSCGRP
MO, if PT is set to
TUNNEL, this
parameter can be
set to any value in
the range of 0 to
In the RSCGRP
MO, this parameter
must be set to No (And no impact
KBPS if BEAR is on the UE in idle
set to IPV4. Read & Write mode) N/A N/A
In the RSCGRP
MO, this parameter
can be set to any
value within the
range of 32 to
STM1 and RU is set
to KBPS.
In the RSCGRP
MO, this parameter
can be set to any
value within the
range of 76 to
STM1 and RU is set
to CELL/S.
In the RSCGRP
MO, this parameter
can be set to any
value within the
range of 32 to 1984
if PT is set to PPP.
In the RSCGRP
MO, this parameter
can be set to any
value within the
range of 32 to
MPGRP.
In the RSCGRP
MO, this parameter
can be set to any
value within the
range of 32 to
1000000 if PT is set No (And no impact
to ETH, ETHTRK, on the UE in idle
or TUNNEL. Read & Write mode) N/A N/A
In the RSCGRP
MO, this parameter
can be set to any
value within the
range of 32 to
STM1 and RU is set
to KBPS.
In the RSCGRP
MO, this parameter
can be set to any
value within the
range of 76 to
129717 if PT is set
to STM1 and RU is
set to CELL/S.
In the RSCGRP
MO, this parameter
can be set to any
value within the
range of 32 to 1984
if PT is set to PPP.
In the RSCGRP
MO, this parameter
can be set to any
value within the
range of 32 to
MPGRP.
In the RSCGRP
MO, this parameter
can be set to any
value within the
range of 32 to
1000000 if PT is set No (And no impact
to ETH, ETHTRK, on the UE in idle
or TUNNEL. Read & Write mode) N/A N/A
In an RSCGRP MO,
TXPBS must be
greater than or
equal to TXCBS.
In the RSCGRP
MO, if PT is set to
TUNNEL, this
parameter can be
set to any value in
the range of 64 to
1000000.
In the RSCGRP
MO, if PT is set to
ETH or ETHTRK,
this parameter can
be set to any value
1000000.
In the RSCGRP
MO, if PT is set to
PPP, this parameter
can be set to any
value in the range
of 64 to 3968.
In the RSCGRP
MO, if PT is set to
MPGRP, this
parameter can be
set to any value in No (And no impact
In the RSCGRP
MO, if PT is set to
TUNNEL, this
parameter can be
set to any value in
the range of 64 to
1000000.
In the RSCGRP
MO, if PT is set to
ETH or ETHTRK,
this parameter can
be set to any value
1000000.
In the RSCGRP
MO, if PT is set to
PPP, this parameter
can be set to any
value in the range
of 64 to 3968.
In the RSCGRP
MO, if PT is set to
MPGRP, this
parameter can be
In the RSCGRP
MO, this parameter
is valid only when
BEAR is set to IP. Read Only N/A N/A N/A
In the RSCGRP
MO, this parameter No (And no impact
is valid only when on the UE in idle
BEAR is set to IP. Read & Write mode) N/A N/A
In an RSCGRP MO,
TXPIR must be
greater than or
equal to TXCIR.
In the RSCGRP
MO, if PT is set to
ETH or ETHTRK,
this parameter can
be set to any value
1000000.
In the RSCGRP
MO, if PT is set to
TUNNEL, this
parameter can be
In an RSCGRP MO,
RXPIR must be
greater than or
equal to RXCIR.
In the RSCGRP
MO, if PT is set to
ETH or ETHTRK,
this parameter can
be set to any value
1000000.
In the RSCGRP
MO, if PT is set to
TUNNEL, this
parameter can be
In an RSCGRP MO,
TXPIR must be
greater than or
equal to TXCIR.
In the RSCGRP
MO, if PT is set to
ETH or ETHTRK,
this parameter can
be set to any value
1000000.
In the RSCGRP
MO, if PT is set to
TUNNEL, this
parameter can be
In an RSCGRP MO,
RXPIR must be
greater than or
equal to RXCIR.
In the RSCGRP
MO, if PT is set to
ETH or ETHTRK,
this parameter can
be set to any value
1000000.
In the RSCGRP
MO, if PT is set to
TUNNEL, this
parameter can be
In an RSCGRP MO,
TXPBS must be
greater than or
equal to TXCBS.
In the RSCGRP
MO, if PT is set to
ETH or ETHTRK,
this parameter can
be set to any value
1000000.
In the RSCGRP
MO, if PT is set to
TUNNEL, this
parameter can be




In the
RSCGRPALG MO,
if SN is set to a
value in the range
of 0 to 5 and BEAR
is set to ATM, this
parameter can be
set to
E1_COVERBOARD
or
UNCHANNELLED_
COVERBOARD.
In the
RSCGRPALG MO,
if SN is set to a
value in the range
of 0 to 5 and BEAR
is set to IP, this
parameter can be
set to
E1_COVERBOARD
or
ETH_COVERBOAR
D.
In the
RSCGRPALG MO,
7, this parameter
can be set to
BASE_BOARD,
BACK_BOARD, or
ETH_COVERBOAR

In the
RSCGRPALG MO,
if BEAR and SBT
are set to IP and
BASE_BOARD,
respectively, this
parameter can be
set to PPP,
MPGRP, ETH or
ETHTRK.
In the
RSCGRPALG MO,
if BEAR and SBT
are set to IP and
BACK_BOARD,
respectively, this
parameter can be
set to PPP or
TUNNEL.
In the
RSCGRPALG MO,
if BEAR and SBT
are set to IP and
E1_COVERBOARD
, respectively, this
parameter can be
set to PPP or
MPGRP.
In the
RSCGRPALG MO,
if BEAR and SBT
are set to IP and
ETH_COVERBOAR
D, respectively, this
parameter can be
set to ETH or
are set to
BASE_BOARD and
ETH, respectively,
this parameter can
be set to 0 or 1.
In the RSCGRP
MO, if SBT and PT
are set to
BASE_BOARD and
ETHTRK,
respectively, this
parameter can be
set to 0 or 1.
In the RSCGRP
MO, if SBT and PT
are set to
ETH_COVERBOAR
D and ETH,
respectively, this
parameter can be
set to any value in
In the RSCGRP
MO, if SBT and PT
are set to
ETH_COVERBOAR
D and ETHTRK,
respectively, this
parameter can be
set to 0 or 2.
In the RSCGRP
MO, if PT is set to
TUNNEL, this
parameter can be
set to any value in
the range of 0 to
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In an RSCGRPALG
MO, CCTTH must No (And no impact
CTTH. Read & Write mode) N/A N/A
In an RSCGRPALG
MO, CCTTH must No (And no impact
CTTH. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

In the SCTPHOST
MO, if VRFIDX is
set to any value in
the range of 1 to 7,
IPVERSION must
not be set to IPv6.
In the SCTPHOST
MO, if VRFIDX is
set to any value in
SIGIP1SECSWITC
H must not be set
to ENABLE.
In the SCTPHOST
MO, if VRFIDX is
set to any value in
SIGIP2SECSWITC
H must not be set
In the SCTPHOST
MO, if VRFIDX is
set to any value in
IPVERSION must
not be set to IPv6. Read Only N/A N/A N/A
In the SCTPHOST
MO, SIGIP1V4
must be a valid IP
address of Class A,
it cannot be set to
127.x.x.x or 0.x.x.x.
In the SCTPHOST
MO, SIGIP2V4
must be different
from SIGIP1V4.
In the SCTPHOST
MO, this parameter
is valid only when
IPVERSION is set
to IPv4. Read & Write Yes BS Less than 1 minute
In the SCTPHOST
MO, SIGIP1V6
must be set to a
global unicast
address.
In the SCTPHOST
MO, SIGIP2V6
must be different
from SIGIP1V6.
In the SCTPHOST
MO, this parameter
is valid only when
IPVERSION is set
In the SCTPHOST
MO, if VRFIDX is
set to any value in
SIGIP1SECSWITC
H must not be set
In the SCTPHOST
MO, this parameter
is valid only when
SIGIP1SECSWITC
H is set to
In the SCTPHOST
MO, SIGIP2V4
must be a valid IP
address of Class A,
it cannot be set to
but can be set to
0.0.0.0.
In the SCTPHOST
MO, SIGIP2V4
must be different
from SIGIP1V4.
In the SCTPHOST
MO, this parameter
is valid only when
IPVERSION is set
In the SCTPHOST
MO, SIGIP2V6
must be set to a
global unicast
address or
0:0:0:0:0:0:0:0.
In the SCTPHOST
MO, SIGIP2V6
must be different
from SIGIP1V6.
In the SCTPHOST
MO, this parameter
is valid only when
IPVERSION is set
In the SCTPHOST
MO, if VRFIDX is
set to any value in
SIGIP2SECSWITC
H must not be set
In the SCTPHOST
MO, this parameter
is valid only when
SIGIP2SECSWITC
H is set to
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
The LOCIP
parameter in the
SCTPLNK MO
must be a valid IP
address of Class A,
it cannot be set to
127.x.x.x or 0.x.x.x.
In an SCTPLNK
MO, LOCIP,
SECLOCIP,
PEERIP, and
SECPEERIP must
be mutually
different except that
SECLOCIP and
SECPEERIP are
both set to 0.0.0.0. Read & Write Yes BS Less than 1 minute
SECLOCIP in the
SCTPLNK MO
must be a valid IP
address of Class A,
it cannot be set to
127.x.x.x or 0.x.x.x,
but can be set to
0.0.0.0.
In an SCTPLNK
MO, LOCIP,
SECLOCIP,
PEERIP, and
SECPEERIP must
be mutually
SECLOCIP and
SECPEERIP are
PEERIP in the
SCTPLNK MO
must be a valid IP
address of Class A,
it cannot be set to
127.x.x.x or 0.x.x.x.
In an SCTPLNK
MO, LOCIP,
SECLOCIP,
PEERIP, and
SECPEERIP must
be mutually
SECLOCIP and
SECPEERIP are
SECPEERIP in the
SCTPLNK MO
must be a valid IP
address of Class A,
it cannot be set to
127.x.x.x or 0.x.x.x,
but can be set to
0.0.0.0.
In an SCTPLNK
MO, LOCIP,
SECLOCIP,
PEERIP, and
SECPEERIP must
be mutually
SECLOCIP and
SECPEERIP are
In an SCTPLNK
MO, RTOINIT must
be greater than or
equal to RTOMIN No (And no impact
and smaller than on the UE in idle
RTOMAX. Read & Write mode) N/A N/A
In an SCTPLNK
MO, RTOINIT must
be greater than or
In an SCTPLNK
MO, RTOINIT must
be greater than or
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In an SCTPLNK
MO,
MAXASSOCRETR No (And no impact
must be larger than on the UE in idle
MAXPATHRETR. Read & Write mode) N/A N/A
In an SCTPLNK
MO,
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In the SCTPLNK
MO, this parameter
AUTOSWITCH is on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In an SCTPLNK6
MO, LOCIP,
SECLOCIP,
PEERIP, and
SECPEERIP must
be mutually
SECLOCIP and
SECPEERIP are
both set to 0. Read & Write Yes BS Less than 1 minute
In an SCTPLNK6
MO, LOCIP,
SECLOCIP,
PEERIP, and
SECPEERIP must
be mutually
SECLOCIP and
SECPEERIP are
both set to 0. Read & Write Yes BS Less than 1 minute
In an SCTPLNK6
MO, LOCIP,
SECLOCIP,
PEERIP, and
SECPEERIP must
be mutually
SECLOCIP and
SECPEERIP are
both set to 0.
In an SCTPLNK6
MO, PEERIP must
be set to a global
unicast address. Read & Write Yes BS Less than 1 minute
In an SCTPLNK6
MO, LOCIP,
SECLOCIP,
PEERIP, and
SECPEERIP must
be mutually
SECLOCIP and
SECPEERIP are
both set to 0.
In an SCTPLNK6
MO, SECPEERIP
must be set to a
global unicast
address. Read & Write Yes BS Less than 1 minute
In an SCTPLNK6
MO, RTOINIT must
be greater than or
In an SCTPLNK6
MO, RTOINIT must
be greater than or
In an SCTPLNK6
MO, RTOINIT must
be greater than or
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In an SCTPLNK6
MO,
In an SCTPLNK6
MO,
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
In the SCTPPEER
MO, if VRFIDX is
set to any value in
IPVERSION must
not be set to IPv6.
In the SCTPPEER
MO, if VRFIDX is
set to any value in
SIGIP1SECSWITC
H must not be set
to ENABLE.
In the SCTPPEER
MO, if VRFIDX is
set to any value in
SIGIP2SECSWITC
H must not be set
In the SCTPPEER
MO, if VRFIDX is
set to any value in
IPVERSION must
In the SCTPPEER
MO, SIGIP1V4
must be a valid IP
address of Class A,
it cannot be set to
127.x.x.x or 0.x.x.x.
In the SCTPPEER
MO, SIGIP2V4
must be different
from SIGIP1V4.
In the SCTPPEER
MO, this parameter
is valid only when
IPVERSION is set
In the SCTPPEER
MO, SIGIP1V6
must be set to a
global unicast
address.
In the SCTPPEER
MO, SIGIP2V6
must be different
from SIGIP1V6.
In the SCTPPEER
MO, this parameter
is valid only when
IPVERSION is set
In the SCTPPEER
MO, if VRFIDX is
set to any value in
SIGIP1SECSWITC
H must not be set
In the SCTPPEER
MO, this parameter
is valid only when
SIGIP1SECSWITC
H is set to
In the SCTPPEER
MO, SIGIP2V4
must be a valid IP
address of Class A,
it cannot be set to
but can be set to
0.0.0.0.
In the SCTPPEER
MO, SIGIP2V4
must be different
from SIGIP1V4.
In the SCTPPEER
MO, this parameter
is valid only when
IPVERSION is set
In the SCTPPEER
MO, SIGIP2V6
must be set to a
global unicast
address or
0:0:0:0:0:0:0:0.
In the SCTPPEER
MO, SIGIP2V6
must be different
from SIGIP1V6.
In the SCTPPEER
MO, this parameter
is valid only when
IPVERSION is set
In the SCTPPEER
MO, if VRFIDX is
set to any value in
SIGIP2SECSWITC
H must not be set
In the SCTPPEER
MO, this parameter
is valid only when
SIGIP2SECSWITC
H is set to
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

In the
SCTPTEMPLATE
MO, RTOINIT must
be greater than or
equal to RTOMIN
and be smaller than
RTOMAX.
In the
SCTPTEMPLATE
MO, RTOMIN must No (And no impact
In the
SCTPTEMPLATE
MO, RTOINIT must
be greater than or
equal to RTOMIN
and be smaller than
RTOMAX.
In the
SCTPTEMPLATE
MO, RTOMIN must No (And no impact
In the
SCTPTEMPLATE
MO, RTOINIT must
be greater than or
and be smaller than on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In the
SCTPTEMPLATE
MO,
MAXASSOCRETR
must be greater No (And no impact
than on the UE in idle
In the
SCTPTEMPLATE
MO,
MAXASSOCRETR
than on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

In the
SECURITYHOST
MO, this parameter
is valid only when
SEGWSWITCH is
set to ENABLE. Read & Write Yes BS Less than 1 minute
In the
SECURITYHOST
MO, LOCIKEIPV4
must be a valid IP
address of Class A,
it cannot be set to
127.x.x.x or 0.x.x.x.
In the
SECURITYHOST
MO, this parameter
is valid only when
IPVERSION is set
In the
SECURITYHOST
MO, LOCIKEIPV6
must be set to a
global unicast
address.
In the
SECURITYHOST
MO, this parameter
is valid only when
IPVERSION is set
In the
SECURITYHOST
MO, this parameter
is valid only when
SEGWSWITCH is
set to ENABLE and
SEGWCONFIGMO
DE is set to
SEGW_CONFIG_O
N_HOST . Read & Write Yes BS Less than 1 minute
In the
SECURITYHOST
MO, this parameter
is valid only when
SEGWSWITCH is
set to ENABLE and
SEGWCONFIGMO
DE is set to
SEGW_CONFIG_O
N_HOST . Read & Write Yes BS Less than 1 minute
No (And no impact
on the UE in idle

In the
SECURITYPEER
MO, this parameter
is valid only when
SEGWSWITCH is
set to DISABLE. Read Only N/A N/A N/A
In the
SECURITYPEER
MO, PEERIKEIPV4
must be a valid IP
address of Class A,
it cannot be set to
127.x.x.x or 0.x.x.x.
In the
SECURITYPEER
MO, this parameter
is valid only when
SEGWSWITCH is
set to DISABLE and
IPVERSION is set
to IPv4 . Read & Write Yes BS Less than 1 minute
In the
SECURITYPEER
MO, PEERIKEIPV6
must be set to a
global unicast
address.
In the
SECURITYPEER
MO, this parameter
is valid only when
SEGWSWITCH is
set to DISABLE and
IPVERSION is set
to IPv6 . Read & Write Yes BS Less than 1 minute
In the
SECURITYPEER
MO, this parameter
is valid only when
SEGWSWITCH is
In the
SECURITYPEER
MO, this parameter
is valid only when
SEGWSWITCH is
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

In the
SECURITYTEMPL
ATE MO, this
parameter is valid
only when
SEGWSWITCH is
set to DISABLE. Read & Write Yes BS Less than 1 minute
In the
SECURITYTEMPL
ATE MO, this
parameter is valid
only when
SEGWSWITCH is
In the
SECURITYTEMPL
ATE MO, this
parameter is valid
only when
SEGWSWITCH is
In the
SECURITYTEMPL
ATE MO, this
parameter is valid
only when
SEGWSWITCH is
set to DISABLE and
IKEVERSION is set
to IKE_V1 . Read & Write Yes BS Less than 1 minute
In the
SECURITYTEMPL
ATE MO, this
parameter is valid
only when
SEGWSWITCH is
In the
SECURITYTEMPL
ATE MO, this
parameter is valid
only when
SEGWSWITCH is
In the
SECURITYTEMPL
ATE MO, this
parameter is valid
only when
SEGWSWITCH is
In the
SECURITYTEMPL
ATE MO, this
parameter is valid
only when
SEGWSWITCH is
In the
SECURITYTEMPL
ATE MO, this
parameter is valid
only when
SEGWSWITCH is



IP in the
SUBNETVLAN MO
must be a valid IP
address of class A,
It cannot be set to
MASK in the
SUBNETVLAN MO
must be all 1. Read Only N/A N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In a TACALG MO,
TRMULHOCACTH
must be greater
than or equal to No (And no impact
TRMULGOLDCAC on the UE in idle
TH. Read & Write mode) N/A N/A
In a TACALG MO,
TRMDLHOCACTH
must be greater
TRMDLGOLDCAC on the UE in idle
TH. Read & Write mode) N/A N/A
In a TACALG MO,
TRMULHOCACTH
must be greater
than or equal to
TRMULGOLDCAC
TH.
In a TACALG MO,
TRMULGOLDCAC
TH must be greater
TRMULSILVERCA on the UE in idle
CTH. Read & Write mode) N/A N/A
In a TACALG MO,
TRMDLHOCACTH
must be greater
than or equal to
TRMDLGOLDCAC
TH.
In a TACALG MO,
TRMDLGOLDCAC
TH must be greater
TRMDLSILVERCA on the UE in idle
CTH. Read & Write mode) N/A N/A
In a TACALG MO,
TRMULGOLDCAC
TH must be greater
than or equal to
TRMULSILVERCA
CTH.
In a TACALG MO,
TRMULSILVERCA
CTH must be
greater than or
equal to No (And no impact
TRMULBRONZEC on the UE in idle
ACTH. Read & Write mode) N/A N/A
In a TACALG MO,
TRMDLGOLDCAC
TH must be greater
than or equal to
TRMDLSILVERCA
CTH.
In a TACALG MO,
TRMDLSILVERCA
CTH must be
greater than or
TRMDLBRONZEC on the UE in idle
In a TACALG MO,
TRMULSILVERCA
CTH must be
greater than or
TRMULBRONZEC on the UE in idle
In a TACALG MO,
TRMDLSILVERCA
CTH must be
greater than or
TRMDLBRONZEC on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In a TLDRALG MO,
TRMULLDRTRGT
H must be greater
than No (And no impact
TRMULLDRCLRTH on the UE in idle
. Read & Write mode) N/A N/A
In a TLDRALG MO,
TRMDLLDRTRGT
H must be greater
TRMDLLDRCLRTH on the UE in idle
In a TLDRALG MO,
TRMULLDRTRGT
H must be greater
than
TRMULLDRCLRTH
.
In a TLDRALG MO,
TRMULLDRCLRTH
must be greater
TRMULMLDTRGT on the UE in idle
H. Read & Write mode) N/A N/A
In a TLDRALG MO,
TRMDLLDRTRGT
H must be greater
than
TRMDLLDRCLRTH
.
In a TLDRALG MO,
TRMDLLDRCLRTH
must be greater
TRMDLMLDTRGT on the UE in idle
In a TLDRALG MO,
TRMULLDRCLRTH
must be greater
than
TRMULMLDTRGT
H.
In a TLDRALG MO,
TRMULMLDTRGT
H must be greater
TRMULMLDCLRT on the UE in idle
In a TLDRALG MO,
TRMDLLDRCLRTH
must be greater
than
TRMDLMLDTRGT
H.
In a TLDRALG MO,
TRMDLMLDTRGT
H must be greater
TRMDLMLDCLRT on the UE in idle
In a TLDRALG MO,
TRMULMLDTRGT
H must be greater
TRMULMLDCLRT on the UE in idle
In a TLDRALG MO,
TRMDLMLDTRGT
H must be greater
TRMDLMLDCLRT on the UE in idle
No (And no impact
on the UE in idle
When
TRMULOLCSWITC
H in the TOLCALG
MO is set to ON,
the QoS of high-
priority services can
be ensured in the
case of transport
overload in the
uplink. When
TRMULOLCSWITC
H in the TOLCALG
MO is set to OFF,
the QoS of high-
priority services
cannot be ensured
in the case of No (And no impact
transport overload on the UE in idle
in the uplink. Read & Write mode) N/A N/A
If
TRMDLOLCSWITC
H in the TOLCALG
MO is set to ON,
the qualities of
high-priority
services are
ensured. If
TRMDLOLCSWITC
H in the TOLCALG
MO is set to OFF,
the qualities of
high-priority
services may
deteriorate in the
case of transport No (And no impact
overload in the on the UE in idle
downlink. Read & Write mode) N/A N/A
In a TOLCALG MO,
TRMULOLCTRIGT
H must be greater
than
TRMULOLCRELTH
.
In the TOLCALG
MO,
TRMULOLCTRIGT
H is valid only when No (And no impact
TRMULOLCSWITC on the UE in idle
H is set to ON. Read & Write mode) N/A N/A
In a TOLCALG MO,
TRMULOLCTRIGT
H must be greater
than
TRMULOLCRELTH
.
In the TOLCALG
MO, this parameter
TRMULOLCSWITC on the UE in idle
No (And no impact
on the UE in idle
In a TOLCALG MO,
TRMDLOLCTRIGT
H must be greater
than
TRMDLOLCRELTH
.
In the TOLCALG
MO, this parameter
TRMDLOLCSWITC on the UE in idle
In a TOLCALG MO,
TRMDLOLCTRIGT
H must be greater
than
TRMDLOLCRELTH
.
In the TOLCALG
MO,
TRMDLOLCRELTH
TRMDLOLCSWITC on the UE in idle
Each TUNNEL MO
must have a unique
combination of
SCN, DCN, SSRN,
DSRN, SSN, and
DSN. Read Only N/A N/A N/A
Each TUNNEL MO
must have a unique
combination of
SCN, DCN, SSRN,
DSRN, SSN, and
Each TUNNEL MO
must have a unique
combination of
SCN, DCN, SSRN,
DSRN, SSN, and
Each TUNNEL MO
must have a unique
combination of Services are
SCN, DCN, SSRN, interrupted until the
DSRN, SSN, and parameter is
DSN. Read & Write Yes BS correctly set.
Each TUNNEL MO
must have a unique
Each TUNNEL MO
must have a unique
Services are
parameter is

LOCALIP in an
UDPSESSION MO
must be a valid IP
address of class A,
it cannot be set to
LOCALIP must be
different from No (And no impact
PEERIP in an on the UE in idle
UDPSESSION MO. Read & Write mode) N/A N/A
PEERIP in an
UDPSESSION MO
must be a valid IP
address of class A,
it cannot be set to
LOCALIP must be
different from No (And no impact
PEERIP in an on the UE in idle
UDPSESSION MO. Read & Write mode) N/A N/A
Services are
parameter is
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In the
UDTPARAGRP
MO, if PRIRULE is
set to DSCP, this
parameter can be
set to any value in
the range of 0 to
63.
In the
UDTPARAGRP
MO, if PRIRULE is
set to
IPPRECEDENCE,
this parameter can
be set to any value No (And no impact
in the range of 0 to on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In the
USERPLANEHOST
MO, if VRFIDX is
set to any value in
IPVERSION must
not be set to IPv6.
In the
USERPLANEHOST
MO, if VRFIDX is
set to any value in
IPSECSWITCH
must not be set to
In the
USERPLANEHOST
MO, if VRFIDX is
set to any value in
IPVERSION must
In the
USERPLANEHOST
MO, LOCIPV4 must
be a valid IP
address of Class A,
it cannot be set to
127.x.x.x or 0.x.x.x.
In the
USERPLANEHOST
MO, this parameter
is valid only when
IPVERSION is set
In the
USERPLANEHOST
MO, LOCIPV6 must
be set to a global
unicast address.
In the
USERPLANEHOST
MO, this parameter
is valid only when
IPVERSION is set
In the
USERPLANEHOST
MO, if VRFIDX is
set to any value in
IPSECSWITCH
must not be set to
In the
USERPLANEHOST
MO, this parameter
is valid only when
IPSECSWITCH is
No (And no impact
on the UE in idle
In the
USERPLANEPEER
MO, if VRFIDX is
set to any value in
IPVERSION must
not be set to IPv6.
In the
USERPLANEPEER
MO, if VRFIDX is
set to any value in
IPSECSWITCH
must not be set to
In the
USERPLANEPEER
MO, if VRFIDX is
set to any value in
IPVERSION must
In the
USERPLANEPEER
MO, PEERIPV4
must be a valid IP
address of Class A,
it cannot be set to
127.x.x.x or 0.x.x.x.
In the
USERPLANEPEER
MO, this parameter
is valid only when
IPVERSION is set
In the
USERPLANEPEER
MO, PEERIPV6
must be set to a
global unicast
address.
In the
USERPLANEPEER
MO, this parameter
is valid only when
IPVERSION is set
In the
USERPLANEPEER
MO, if VRFIDX is
set to any value in
IPSECSWITCH
must not be set to
In the
USERPLANEPEER
MO, this parameter
is valid only when
IPSECSWITCH is
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

In the VLANCLASS
MO, this parameter
is valid only when
TRAFFIC is set to
USERDATA. Read Only N/A N/A N/A
No (And no impact
on the UE in idle

In a VLANMAP
MO, NEXTHOPIP
must be a valid IP
address of class A,
it cannot be set to
In the binary value

into which MASK in
a VLANMAP MO is
converted, 0 cannot
precede 1. In
addition, MASK can
be
255.255.255.255,
but cannot be
0.0.0.0.
In a VLANMAP
MO, the logical
AND result of
NEXTHOPIP and
MASK cannot be 0. Read Only N/A N/A N/A
This parameter
must be set to a
valid value when
the VLANMAP MO
is being modified. Read & Write Yes BS Less than 1 minute
In the VLANMAP
MO, this parameter
is valid only when
VLANMODE is set
to SINGLEVLAN. Read & Write Yes BS Less than 1 minute
In the VLANMAP
MO, this parameter
is valid only when
VLANMODE is set
to SINGLEVLAN.
This parameter is
valid when the
VLANMAP MO is
being modified and
SETPRIO is
changed from No (And no impact
DISABLE to on the UE in idle
This parameter
must be set if the
value of
VLANMODE is
changed from
SINGLEVLAN to
VLANGROUP
during modification
of the VLANMAP
MO. Read & Write Yes BS Less than 1 minute
In the VLANMAP
MO, this parameter
is valid only when
VLANMODE is set
to SINGLEVLAN. Read & Write Yes BS Less than 1 minute
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
When CTRLCN in
the ALD MO is set
to 0, the value
range of CTRLSRN
is 4 to 5, or 60 to
254. When the
value range of
CTRLCN in the
ALD MO is 1 to 62, No (And no impact
CTRLSRN is set to on the UE in idle
4 or 5. Read & Write mode) N/A N/A
When CTRLSRN in
the ALD MO is set
to 4 or 5, the value
of CTRLSN ranges
from 0 to 8 if TYPE
in the CABINET
MO where the ALD
MO is located is set
to BTS3900AL. The
value of CTRLSN
ranges from 0 to 5 if
TYPE is not set to
BTS3900AL. When
the value of
CTRLSRN in the
ALD MO ranges No (And no impact
from 60 to 254, on the UE in idle
CTRLSN is set to 0. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

When CN in the
ANTENNAPORT
MO is set to 0, the
value range of SRN
is 4 to 5 or 60 to
254. When the
value of CN in the
ANTENNAPORT
MO ranges from 1
to 62, the value of
SRN is set to 4 or
When SRN in the
ANTENNAPORT
MO is set to 4 or 5,
the value of SN
TYPE of the
CABINET MO
where the
ANTENNAPORT
to BTS3900AL. The
value of CTRLSN
TYPE is not set to
BTS3900AL. When
the value of SRN in
an
ANTENNAPORT
MO ranges from 60
to 254 and RT in
the RRU MO where
the
ANTENNAPORT
to MPRF, the value
of SN ranges from
1 to 3. When the
value of SRN in an
ANTENNAPORT
MO ranges from 60
to 254 and RT in
the RRU MO where
the
ANTENNAPORT
MO is located is not
set to MPRF, SN
must be set to 0. Read Only N/A N/A N/A
No (And no impact
on the UE in idle
None Read & Write Yes Cell 1 minute

None Read & Write Yes Cell 1 minute
In the same RRU

MO, PWRSWITCH
in the RETPORT
MO and
PWRSWITCH in
the
ANTENNAPORT No (And no impact
cannot be set to ON on the UE in idle
at the same time. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
In an
ANTENNAPORT
MO, if
PWRSWITCH is set
to ON, the value of
UOTHD must be No (And no impact
smaller than on the UE in idle
UCTHD. Read & Write mode) N/A N/A
In an
ANTENNAPORT
MO, if
PWRSWITCH is set
to ON, the value of
UOTHD must be
smaller than
UCTHD.
In an
ANTENNAPORT
MO, if
PWRSWITCH is set
to ON, the value of
UCTHD must be No (And no impact
OCTHD. Read & Write mode) N/A N/A
In an
ANTENNAPORT
MO, if
PWRSWITCH is set
to ON, the value of
OCTHD must be No (And no impact
OOTHD. Read & Write mode) N/A N/A
In an
ANTENNAPORT
MO, if
PWRSWITCH is set
to ON, the value of
OCTHD must be
smaller than
OOTHD.
In an
ANTENNAPORT
MO, if
PWRSWITCH is set
to ON, the value of
UCTHD must be No (And no impact
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
The SCENARIO
should be
configured on the
basis of actual
physical connection
and meet the
following
conditions: 1. When
SCENARIO is set
to REGULAR, one
RRU can control
one RET; 2. When
SCENARIO is set
to DAISY_CHAIN or
SECTOR_SPLITTI
NG or
2G_EXTENSION,
one RRU can
control more than
one RET.
SCENARIO in the
RET MO
corresponding to all
RETSUBUNIT MOs
configured on the
same
ANTENNAPORT
MO must be set to No (And no impact
SECTOR_SPLITTI on the UE in idle
NG. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
The following
parameters cannot
be set to the same
value: DEVICENO
in the RET MO,
DEVICENO in the
TMA MO.
Read Only N/A N/A N/A

The following
parameters cannot
be set to the same
value:
DEVICENAME in
the RET MO,
DEVICENAME in
the TMA MO,and
DEVICENAME in No (And no impact
the VRET MO. on the UE in idle
Read & Write mode) N/A N/A
If SCENARIO in a
RET MO is set to
REGULAR,
CTRLCN,
CTRLSRN, and
CTRLSN in the
RET MO cannot be
all the same as
those in any other
RET MO.
If SCENARIO in a
RET MO is not set
to REGULAR,
CTRLCN,
CTRLSRN, and
CTRLSN in this
RET MO cannot be
all the same as
those in a RET MO
with SCENARIO set No (And no impact
to REGULAR. on the UE in idle
If SCENARIO in a
RET MO is set to
REGULAR,
CTRLCN,
CTRLSRN, and
CTRLSN in the
RET MO cannot be
all the same as
those in any other
RET MO.
If SCENARIO in a
RET MO is not set
to REGULAR,
CTRLCN,
CTRLSRN, and
CTRLSN in this
RET MO cannot be
all the same as
those in a RET MO
If SCENARIO in a
RET MO is set to
REGULAR,
CTRLCN,
CTRLSRN, and
CTRLSN in the
RET MO cannot be
all the same as
those in any other
RET MO.
If SCENARIO in a
RET MO is not set
to REGULAR,
CTRLCN,
CTRLSRN, and
CTRLSN in this
RET MO cannot be
all the same as
those in a RET MO

In the RET MO,
when SCENARIO is
not set to
REGULAR,
VENDORCODE
and SERIALNO
must be specified.
VENDORCODE in
a RET MO must be
a string of 0 or 2
characters.
If SCENARIO in a
RET MO is not set
to REGULAR,
VENDORCODE
must be set.
When SCENARIO
in a RET MO is set
to REGULAR,
VENDORCODE
must be set if
SERIALNO is set.
The following
parameters must
have a unique
combination of
values: 1.
VENDORCODE
and SERIALNO in
the RET MO; 2.
VENDORCODE
and SERIALNO in No (And no impact
the TMA MO. on the UE in idle
In the RET MO,
when SCENARIO is
not set to
REGULAR,
VENDORCODE
and SERIALNO
must be specified.
If SCENARIO in a
RET MO is not set
to REGULAR,
SERIALNO must
be set.
When SCENARIO
in a RET MO is set
to REGULAR,
SERIALNO must
be set if
VENDORCODE is
set.
The following
parameters must
have a unique
combination of
values: 1.
VENDORCODE
and SERIALNO in
the RET MO; 2.
VENDORCODE

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
BAND1 cannot be
the same as
BAND2, BAND3, or
BAND4. The same
rule applies to
BAND2, BAND3,
and BAND4.
In a
RETDEVICEDATA
MO, when BAND4
is not set to
UNUSED, BAND3
cannot be set to
UNUSED. When
BAND3 is not set to
UNUSED, BAND2
cannot be set to
UNUSED. When
BAND2 is not set to
UNUSED, BAND1
cannot be set to
UNUSED.
In a
RETDEVICEDATA
MO, when BAND4
is not set to
UNUSED, BAND4
must be greater
than BAND3. When
BAND3 is not set to
UNUSED, BAND3
must be greater
than BAND2. When
BAND2 is not set to
UNUSED, BAND2 No (And no impact
must be greater on the UE in idle
than BAND1. Read & Write mode) N/A N/A
BAND1 cannot be
the same as
BAND2, BAND3, or
BAND4. The same
rule applies to
BAND2, BAND3,
and BAND4.
In a
RETDEVICEDATA
MO, when BAND4
is not set to
UNUSED, BAND3
cannot be set to
UNUSED. When
BAND3 is not set to
UNUSED, BAND2
cannot be set to
UNUSED. When
BAND2 is not set to
UNUSED, BAND1
cannot be set to
UNUSED.
In a
RETDEVICEDATA
MO, when BAND4
is not set to
UNUSED, BAND4
must be greater
than BAND3. When
BAND3 is not set to
UNUSED, BAND3
must be greater
than BAND2. When
BAND2 is not set to
BAND1 cannot be
the same as
BAND2, BAND3, or
BAND4. The same
rule applies to
BAND2, BAND3,
and BAND4.
In a
RETDEVICEDATA
MO, when BAND4
is not set to
UNUSED, BAND3
cannot be set to
UNUSED. When
BAND3 is not set to
UNUSED, BAND2
cannot be set to
UNUSED. When
BAND2 is not set to
UNUSED, BAND1
cannot be set to
UNUSED.
In a
RETDEVICEDATA
MO, when BAND4
is not set to
UNUSED, BAND4
must be greater
than BAND3. When
BAND3 is not set to
UNUSED, BAND3
must be greater
than BAND2. When
BAND2 is not set to
BAND1 cannot be
the same as
BAND2, BAND3, or
BAND4. The same
rule applies to
BAND2, BAND3,
and BAND4.
In a
RETDEVICEDATA
MO, when BAND4
is not set to
UNUSED, BAND3
cannot be set to
UNUSED. When
BAND3 is not set to
UNUSED, BAND2
cannot be set to
UNUSED. When
BAND2 is not set to
UNUSED, BAND1
cannot be set to
UNUSED.
In a
RETDEVICEDATA
MO, when BAND4
is not set to
UNUSED, BAND4
must be greater
than BAND3. When
BAND3 is not set to
UNUSED, BAND3
must be greater
than BAND2. When
BAND2 is not set to
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle



In the same RRU

MO, PWRSWITCH
in the RETPORT
MO and
PWRSWITCH in
the
ANTENNAPORT No (And no impact
cannot be set to ON on the UE in idle
at the same time. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
In a RETPORT MO,
if PWRSWITCH is
of UOTHD must be No (And no impact
UCTHD. Read & Write mode) N/A N/A
In a RETPORT MO,
if PWRSWITCH is
of UOTHD must be
smaller than
UCTHD.
In a RETPORT MO,
if PWRSWITCH is
of UCTHD must be No (And no impact
In a RETPORT MO,
if PWRSWITCH is
of OCTHD must be No (And no impact
smaller than the on the UE in idle
value of OOTHD. Read & Write mode) N/A N/A
In a RETPORT MO,
if PWRSWITCH is
of OCTHD must be
smaller than the
value of OOTHD.
In a RETPORT MO,
if PWRSWITCH is
of UCTHD must be No (And no impact


RETSUBUNIT MOs
configured on the
same
ANTENNAPORT
MO must be set to
SECTOR_SPLITTI
NG.
When CONNCN1 in
a RETSUBUNIT
MO is set to a value
other than 255,
CONNSRN1 and
CONNSN1 must all
be set to a value
other than 255.
Similarly, when
CONNCN2 in a
RETSUBUNIT MO
is set to a value
other than 255,
CONNSRN2 and
CONNSN2 must all
be set to a value
other than 255.
In a RETSUBUNIT
MO, the
combination of
CONNCN1,
CONNSRN1,
CONNSN1, and
CONNPN1 cannot
be the same as the
combination of
CONNCN2,
CONNSRN2, No (And no impact
CONNSN2, and on the UE in idle
CONNPN2. Read & Write mode) N/A N/A
other than 255,
CONNSRN1 and
CONNSN1 must all
be set to a value
other than 255.
Similarly, when
CONNCN2 in a
RETSUBUNIT MO
is set to a value
other than 255,
CONNSRN2 and
CONNSN2 must all
be set to a value
other than 255.
In a RETSUBUNIT
MO, the
combination of
CONNCN1,
CONNSRN1,
CONNSN1, and
CONNPN1 cannot
be the same as the
combination of
CONNCN2,
CONNSRN2,
CONNSN2, and
CONNPN2.
SCENARIO in the
RET MO
RETSUBUNIT MOs
configured on the
same
ANTENNAPORT
RETSUBUNIT MOs
configured on the
same
ANTENNAPORT
MO must be set to
SECTOR_SPLITTI
NG.
When CONNCN1 in
a RETSUBUNIT
other than 255,
CONNSRN1 and
CONNSN1 must all
be set to a value
other than 255.
Similarly, when
CONNCN2 in a
RETSUBUNIT MO
is set to a value
other than 255,
CONNSRN2 and
CONNSN2 must all
be set to a value
other than 255.
In a RETSUBUNIT
MO, the
combination of
CONNCN1,
CONNSRN1,
CONNSN1, and
CONNPN1 cannot
be the same as the
combination of
CONNCN2,
SCENARIO in the
RET MO
RETSUBUNIT MOs
configured on the
same
ANTENNAPORT
MO must be set to
SECTOR_SPLITTI
NG.
In a RETSUBUNIT
MO, the
combination of
CONNCN1,
CONNSRN1,
CONNSN1, and
CONNPN1 cannot
be the same as the
combination of
CONNCN2,
RETSUBUNIT MOs
configured on the
same
ANTENNAPORT
MO must be set to
SECTOR_SPLITTI
NG.
When CONNCN1 in
a RETSUBUNIT
other than 255,
CONNSRN1 and
CONNSN1 must all
be set to a value
other than 255.
Similarly, when
CONNCN2 in a
RETSUBUNIT MO
is set to a value
other than 255,
CONNSRN2 and
CONNSN2 must all
be set to a value
other than 255.
In a RETSUBUNIT
MO, the
combination of
CONNCN1,
CONNSRN1,
CONNSN1, and
CONNPN1 cannot
be the same as the
combination of
CONNCN2,
other than 255,
CONNSRN1 and
CONNSN1 must all
be set to a value
other than 255.
Similarly, when
CONNCN2 in a
RETSUBUNIT MO
is set to a value
other than 255,
CONNSRN2 and
CONNSN2 must all
be set to a value
other than 255.
In a RETSUBUNIT
MO, the
combination of
CONNCN1,
CONNSRN1,
CONNSN1, and
CONNPN1 cannot
be the same as the
combination of
CONNCN2,
CONNSRN2,
CONNSN2, and
CONNPN2.
SCENARIO in the
RET MO
RETSUBUNIT MOs
configured on the
same
ANTENNAPORT
RETSUBUNIT MOs
configured on the
same
ANTENNAPORT
MO must be set to
SECTOR_SPLITTI
NG.
When CONNCN1 in
a RETSUBUNIT
other than 255,
CONNSRN1 and
CONNSN1 must all
be set to a value
other than 255.
Similarly, when
CONNCN2 in a
RETSUBUNIT MO
is set to a value
other than 255,
CONNSRN2 and
CONNSN2 must all
be set to a value
other than 255.
In a RETSUBUNIT
MO, the
combination of
CONNCN1,
CONNSRN1,
CONNSN1, and
CONNPN1 cannot
be the same as the
combination of
CONNCN2,
SCENARIO in the
RET MO
RETSUBUNIT MOs
configured on the
same
ANTENNAPORT
MO must be set to
SECTOR_SPLITTI
NG.
In a RETSUBUNIT
MO, the
combination of
CONNCN1,
CONNSRN1,
CONNSN1, and
CONNPN1 cannot
be the same as the
combination of
CONNCN2,
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
The value of
SUBNAME must be
unique in No (And no impact
RETSUBUNIT on the UE in idle
MOs. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
The following
parameters cannot
be set to the same
value: DEVICENO
in the RET MO,
DEVICENO in the
TMA MO.

The following
parameters cannot
be set to the same
value:
DEVICENAME in
the RET MO,
DEVICENAME in
the TMA MO,and
DEVICENAME in No (And no impact
the VRET MO. on the UE in idle
No (And no impact
on the UE in idle
When CTRLCN in
the ALD MO is set
to 0, the value
range of CTRLSRN
is 4 to 5, or 60 to
254. When the
value range of
CTRLCN in the
ALD MO is 1 to 62, No (And no impact
CTRLSRN is set to on the UE in idle
4 or 5. Read & Write mode) N/A N/A
When CTRLSRN in
the ALD MO is set
to 4 or 5, the value
of CTRLSN ranges
from 0 to 8 if TYPE
in the CABINET
MO where the ALD
to BTS3900AL. The
value of CTRLSN
TYPE is not set to
BTS3900AL. When
the value of
CTRLSRN in the
ALD MO ranges No (And no impact
from 60 to 254, on the UE in idle
CTRLSN is set to 0. Read & Write mode) N/A N/A
VENDORCODE in
a TMA MO must be
a string of 0 or 2
characters.
If SERIALNO in a
TMA MO has been
set,
VENDORCODE in
the TMA MO must
be set.
The following
parameters must
have a unique
combination of
values: 1.
VENDORCODE
and SERIALNO in
the RET MO; 2.
VENDORCODE
If VENDORCODE
in a TMA MO has
been set,
SERIALNO in the
TMA MO must be
set.
The following
parameters must
have a unique
combination of
values: 1.
VENDORCODE
and SERIALNO in
the RET MO; 2.
VENDORCODE

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
BAND1 cannot be
the same as
BAND2, BAND3, or
BAND4. The same
rule applies to
BAND2, BAND3,
and BAND4.
In a
TMADEVICEDATA
MO, when BAND4
is not set to
UNUSED, BAND3
cannot be set to
UNUSED. When
BAND3 is not set to
UNUSED, BAND2
cannot be set to
UNUSED. When
BAND2 is not set to
UNUSED, BAND1
cannot be set to
UNUSED.
In a
TMADEVICEDATA
MO, when BAND4
is not set to
UNUSED, BAND4
must be greater
than BAND3. When
BAND3 is not set to
UNUSED, BAND3
must be greater
than BAND2. When
BAND2 is not set to
BAND1 cannot be
the same as
BAND2, BAND3, or
BAND4. The same
rule applies to
BAND2, BAND3,
and BAND4.
In a
TMADEVICEDATA
MO, when BAND4
is not set to
UNUSED, BAND3
cannot be set to
UNUSED. When
BAND3 is not set to
UNUSED, BAND2
cannot be set to
UNUSED. When
BAND2 is not set to
UNUSED, BAND1
cannot be set to
UNUSED.
In a
TMADEVICEDATA
MO, when BAND4
is not set to
UNUSED, BAND4
must be greater
than BAND3. When
BAND3 is not set to
UNUSED, BAND3
must be greater
than BAND2. When
BAND2 is not set to
BAND1 cannot be
the same as
BAND2, BAND3, or
BAND4. The same
rule applies to
BAND2, BAND3,
and BAND4.
In a
TMADEVICEDATA
MO, when BAND4
is not set to
UNUSED, BAND3
cannot be set to
UNUSED. When
BAND3 is not set to
UNUSED, BAND2
cannot be set to
UNUSED. When
BAND2 is not set to
UNUSED, BAND1
cannot be set to
UNUSED.
In a
TMADEVICEDATA
MO, when BAND4
is not set to
UNUSED, BAND4
must be greater
than BAND3. When
BAND3 is not set to
UNUSED, BAND3
must be greater
than BAND2. When
BAND2 is not set to
In a
TMADEVICEDATA
MO, if BAND1 is
not set to UNUSED,
BAND1 cannot be
the same as
BAND2, BAND3, or
BAND4. The same
rule applies to
BAND2, BAND3,
and BAND4.
In a
TMADEVICEDATA
MO, when BAND4
is not set to
UNUSED, BAND4
must be greater
than BAND3. When
BAND3 is not set to
UNUSED, BAND3
must be greater
than BAND2. When
BAND2 is not set to
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

The four frequency

bands supported by
the TMA must differ
from each other. Read Only N/A N/A N/A
The four frequency

bands supported by
the TMA must differ
The four frequency

bands supported by
the TMA must differ
The four frequency
bands supported by
the TMA must differ

If RXMINFB or
RXMAXFB in the
TMADeviceData
MO is set,
RXMINFB must be
smaller than
RXMAXFB. Read Only N/A N/A N/A
If TXMINFB or
TXMAXFB in the
TMADeviceData
MO is set,
TXMINFB must be
smaller than
TXMAXFB. Read Only N/A N/A N/A
If TXMINFB or
TXMAXFB in the
TMADeviceData
MO is set,
TXMINFB must be
smaller than
TXMAXFB. Read Only N/A N/A N/A
If RXMINFB or
RXMAXFB in the
TMADeviceData
MO is set,
RXMINFB must be
smaller than
RXMAXFB. Read Only N/A N/A N/A

In a TMASUBUNIT
MO, a unique
combination of
CONNCN,
CONNSRN,
CONNSN, and No (And no impact
CONNPN is on the UE in idle
necessary. Read & Write mode) N/A N/A
In a TMASUBUNIT
MO, a unique
combination of
CONNCN,
CONNSRN,
In a TMASUBUNIT
MO, a unique
combination of
CONNCN,
CONNSRN,
In a TMASUBUNIT
MO, a unique
combination of
CONNCN,
CONNSRN,
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle


The following
parameters cannot
be set to the same
value:
DEVICENAME in
the RET MO,
DEVICENAME in
the TMA MO,and No (And no impact
DEVICENAME in on the UE in idle
the VRET MO. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
If
CONNPN1,CONNP
N2,CONNPN3 and
CONNPN4 in a
VRETSUBUNIT
MO are not set to
NULL, they must be
different.
Only one
VRETSUBUNIT
MO can be
connected to a No (And no impact
VANTENNAPORT on the UE in idle
MO. Read & Write mode) N/A N/A
If
CONNPN1,CONNP
N2,CONNPN3 and
CONNPN4 in a
VRETSUBUNIT
MO are not set to
NULL, they must be
different.
Only one
VRETSUBUNIT
MO can be
The value of
SUBNAME must be
unique in No (And no impact
VRETSUBUNIT on the UE in idle
MOs. Read & Write mode) N/A N/A

No (And no impact
on the UE in idle

If
CONNPN1,CONNP
N2,CONNPN3 and
CONNPN4 in a
VRETSUBUNIT
MO are not set to
NULL, they must be
different.
Only one
VRETSUBUNIT
MO can be
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
If
CONNPN1,CONNP
N2,CONNPN3 and
CONNPN4 in a
VRETSUBUNIT
MO are not set to
NULL, they must be
different.
Only one
VRETSUBUNIT
MO can be
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

Less than 3
None Read & Write Yes BS minutes
Less than 3
Less than 3
No (And no impact
on the UE in idle

Less than 3
Less than 3
Less than 3
Less than 3
When PT in a
LINECLK MO is set
to STM1, PN
corresponding to
the LINECLK MO is Less than 3
set to 0. Read & Write Yes BS minutes

No (And no impact
on the UE in idle
Less than 3

If MODE and
CLKSRC in the
TASM MO are set
to MANUAL and
TOD, respectively,
TYPE of the
corresponding TOD
MO must be set to
IN.
In a TOD MO, when
SN is set to 6 or 7,
TYPE cannot be set Less than 3
to OUT. Read & Write Yes BS minutes
Less than 3
Less than 3
When two TOD
MOs have the value
6 or 7 for SN, SN in
one TOD MO must
be set to 6 and SN
in the other TOD
MO must be set to
7.
When SN in two
TOD MOs both are
greater than or
equal to 0 and
smaller than or
equal to 5, the
values of SN in the
two MOs must be
the same.
The values of SN in
two TOD MOs must
both be greater
than or equal to 0
and smaller than or
equal to 5, or
greater than or
equal to 6 and
smaller than or Less than 3
equal to 7. Read & Write Yes BS minutes
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
When a GPS MO is
configured on a
BBU subrack, GN
must be set to 0 or
Less than 3
Less than 3
Less than 3
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle



No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
If PT in the DEVIP
MO corresponding
to an IPCLKLNK
MO is set to
LOOPINT, ICPT in
the IPCLKLNK MO
cannot be set to
HW_DEFINED.
If two IPCLKLNK
MOs have been
configured, the two
MOs must have the Less than 3
same ICPT value. Read & Write Yes BS minutes
When two
IPCLKLNK MOs
are configured and
the values of ICPT
are both set to PTP,
the combination of
CN, SRN, SN,
CNM, DM, CMPST,
and DELAYTYPE
must be the same
in the two Less than 3
IPCLKLNK MOs. Read & Write Yes BS minutes
When two
IPCLKLNK MOs
are configured and
the values of ICPT
the combination of
CN, SRN, SN,
CNM, DM, CMPST,
and DELAYTYPE
must be the same
When two
IPCLKLNK MOs
are configured and
the values of ICPT
the combination of
CN, SRN, SN,
CNM, DM, CMPST,
and DELAYTYPE
must be the same
When two
IPCLKLNK MOs
are configured, the
values of CIP in the
two MOs must be
the same when the
following conditions
are met: 1. ICPT is
set to PTP and
CNM is not set to
L2_MULTICAST in
the two MOs; 2.
IPMODE is set to
IPV4 in the two
MOs.
In the IPCLKLNK
MO, if CNM is not
set to
L2_MULTICAST
and IPMODE is set
to IPV4, CIP cannot
be set to 0.0.0.0,
255.255.255.255,
127.x.x.x, or 0.x.x.x,
and should be one
of CLASS A,
CLASS B, CLASS
C.
In the IPCLKLNK
MO, SIP and CIP
must be set to
different values
when CNM is not
set to
L2_MULTICAST
and IPMODE is set Less than 3
to IPV4. Read & Write Yes BS minutes
127.x.x.x, or 0.x.x.x,
and should be one
of CLASS A,
CLASS B, CLASS
C, when the
are met: 1. CNM is
not set to
L2_MULTICAST; 2.
IPMODE is set to
IPV4.
In the IPCLKLNK
MO, SIP and CIP
must be set to
different values
when CNM is not
set to
L2_MULTICAST
and IPMODE is set
to IPV4.
When two
IPCLKLNK MOs
are configured on
the same board, the
values of SIP in the
two MOs must be
different when the
are met: 1. ICPT is
set to PTP and
CNM is not set to
L2_MULTICAST
and IPMODE is set
to IPV4 in the two
MOs; 2. ICPT is set
to HW_DEFINED in Less than 3
the two MOs. Read & Write Yes BS minutes
The DM is valid
only when ICPT in
the IPCLKLNK MO
is set to PTP.
When two
IPCLKLNK MOs
are configured and
the values of ICPT
the combination of
CN, SRN, SN,
CNM, DM, CMPST,
and DELAYTYPE
must be the same
When ICPT in the
IPCLKLNK MO is
set to
HW_DEFINED,
CMPST and
DELAYTYPE in the
IPCLKLNK MO
cannot be
configured.
The DELAYTYPE is
valid only when
ICPT in the
IPCLKLNK MO is
set to PTP.
When two
IPCLKLNK MOs
are configured and
the values of ICPT
the combination of
CN, SRN, SN,
CNM, DM, CMPST,
and DELAYTYPE
must be the same No (And no impact
in the two on the UE in idle
IPCLKLNK MOs. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
When
CLASSIDENTIFY
in the IPCLKLNK
MO is set to OFF,
the BMC algorithm
is disabled, and the
setting of CLASS0
does not take
effect. When
CLASSIDENTIFY
in the IPCLKLNK
MO is set to ON,
the BMC algorithm
is enabled. If there
are multiple clock
servers at different
clock quality levels,
the server that
meets the
customer's
requirements to the
most extent is
selected in
descending order of
priority.
The values of any
two parameters
among CLASS0,
CLASS1, CLASS2,
and CLASS3 in an No (And no impact
IPCLKLNK must be on the UE in idle
different. Read & Write mode) N/A N/A
When
CLASSIDENTIFY
in the IPCLKLNK
MO is set to OFF,
the BMC algorithm
setting of CLASS1
does not take
effect. When
CLASSIDENTIFY
in the IPCLKLNK
MO is set to ON,
the BMC algorithm
are multiple clock
the server that
meets the
customer's
requirements to the
most extent is
selected in
descending order of
priority.
The values of any
two parameters
among CLASS0,
CLASS1, CLASS2,
When
CLASSIDENTIFY
in the IPCLKLNK
MO is set to OFF,
the BMC algorithm
setting of CLASS2
does not take
effect. When
CLASSIDENTIFY
in the IPCLKLNK
MO is set to ON,
the BMC algorithm
are multiple clock
the server that
meets the
customer's
requirements to the
most extent is
selected in
descending order of
priority.
The values of any
two parameters
among CLASS0,
CLASS1, CLASS2,
When
CLASSIDENTIFY
in the IPCLKLNK
MO is set to OFF,
the BMC algorithm
setting of CLASS3
does not take
effect. When
CLASSIDENTIFY
in the IPCLKLNK
MO is set to ON,
the BMC algorithm
are multiple clock
the server that
meets the
customer's
requirements to the
most extent is
selected in
descending order of
priority.
The values of any
two parameters
among CLASS0,
CLASS1, CLASS2,

In the IPCLKLNK
MO, the
MACMODE is valid
only when ICPT is
set to PTP and
CNM is set to
L2_MULTICAST.
When two
IPCLKLNK MOs
are configured, the
values of
MACMODE are
both set to YES and
the values of
CLKMAC must be
different in the two
MOs when the
are met: 1. The
values of ICPT are
both set to PTP; 2.
The values of CNM No (And no impact
are both set to on the UE in idle
L2_MULTICAST. Read & Write mode) N/A N/A
In the IPCLKLNK
MO, the CLKMAC
is valid only when
ICPT is set to PTP,
CNM is set to
L2_MULTICAST,
and MACMODE is
set to YES.
When two
IPCLKLNK MOs
are configured, the
values of
MACMODE are
both set to YES and
the values of
CLKMAC must be
different in the two
MOs when the
are met: 1. The
values of ICPT are
both set to PTP; 2.
The values of CNM No (And no impact
are both set to on the UE in idle
L2_MULTICAST. Read & Write mode) N/A N/A
The CNM is valid

only when ICPT in
the IPCLKLNK MO
is set to PTP.
When two
IPCLKLNK MOs
are configured and
the values of ICPT
the combination of
CN, SRN, SN,
CNM, DM, CMPST,
and DELAYTYPE
must be the same
When ICPT in the
IPCLKLNK MO is
set to
HW_DEFINED,
CMPST and
DELAYTYPE in the
IPCLKLNK MO
cannot be
configured.
The CMPST is valid
only when ICPT in
the IPCLKLNK MO
is set to PTP.
When two
IPCLKLNK MOs
are configured and
the values of ICPT
the combination of
CN, SRN, SN,
CNM, DM, CMPST,
and DELAYTYPE
must be the same No (And no impact
in the two on the UE in idle
IPCLKLNK MOs. Read & Write mode) N/A N/A

When two
IPCLKLNK MOs
are configured, the
values of PRI must
be the same if the
values of ICPT are No (And no impact
both set to PTP in on the UE in idle
the two MOs. Read & Write mode) N/A N/A
In the IPCLKLNK
MO, ANNFREQ is
valid only when
CNM is set to
UNICAST and
PROFILETYPE is
set to G.8265.1.
When two
IPCLKLNK MOs
are configured, the
combination of
ANNFREQ and
SYNCFREQ in the
two MOs must be
the same when the
are met: 1. The
values of ICPT are
both set to PTP; 2.
The values of CNM
are both set to
UNICAST; 3. The
values of
PROFILETYPE are No (And no impact
both set to on the UE in idle
G.8265.1. Read & Write mode) N/A N/A
In the IPCLKLNK
MO, SYNCFREQ is
valid only when
CNM is set to
UNICAST and
PROFILETYPE is
set to G.8265.1.
When two
IPCLKLNK MOs
are configured, the
combination of
ANNFREQ and
SYNCFREQ in the
two MOs must be
the same when the
are met: 1. The
values of ICPT are
both set to PTP; 2.
The values of CNM
are both set to
UNICAST; 3. The
values of
PROFILETYPE are No (And no impact
G.8265.1. Read & Write mode) N/A N/A
In the IPCLKLNK
MO, MASTERPRIO
is valid only when
CNM is set to
UNICAST and No (And no impact
PROFILETYPE is on the UE in idle
set to G.8265.1. Read & Write mode) N/A N/A
In the IPCLKLNK
MO,
PROFILETYPE is
valid only when
CNM is set to
UNICAST.
If PROFILETYPE in
the IPCLKLNK MO
is set to G.8265.1,
CLKSYNCMODE in
the TASM MO must
be set to FREQ.
When two
IPCLKLNK MOs
are configured, the
values of
PROFILETYPE in
the two MOs must
be the same when
the following
conditions are met:
1. The values of
ICPT are both set
to PTP; 2. The
values of CNM are No (And no impact
UNICAST. Read & Write mode) N/A N/A
UNICAST and
PROFILETYPE is
set to G.8265.1.
When two
IPCLKLNK MOs
are configured, the
values of
NEGDURATION in
the two MOs must
be the same when
the following
conditions are met:
1. The values of
ICPT are both set
to PTP; 2. The
values of CNM are
both set to
UNICAST; 3. The
values of
PROFILETYPE are
both set to
G.8265.1.
When two
IPCLKLNK MOs
are configured, the
values of
PROFILETYPE in
the two MOs must
be the same when
the following
conditions are met:
1. The values of
ICPT are both set
to PTP; 2. The
values of CNM are No (And no impact
UNICAST. Read & Write mode) N/A N/A
If two IPCLKLNK
MOs are
configured, the two
MOs must have the
same IPMODE
value.
If IPMODE in the
IPCLKLNK MO is
set to IPV6,
CLKSYNCMODE in
the TASM MO must Less than 3
be set to FREQ. Read & Write Yes BS minutes
In the IPCLKLNK
MO, CIPV6 is valid
only when CNM is
not set to
L2_MULTICAST
and IPMODE is set
to IPV6.
In the IPCLKLNK
MO, SIPV6 and
CIPV6 must be set
to different values
when ICPT is set to
PTP and CNM is
not set to
L2_MULTICAST
and IPMODE is set
to IPV6.
When two
IPCLKLNK MOs
are configured, the
values of CIPV6 in
the two MOs must
be the same when
the following
conditions are met:
1. ICPT is set to
PTP and CNM is
not set to
L2_MULTICAST in
the two MOs; 2.
IPMODE is set to
IPV6 in the two Less than 3
MOs. Read & Write Yes BS minutes
In the IPCLKLNK
MO, SIPV6 is valid
only when CNM is
not set to
L2_MULTICAST
and IPMODE is set
to IPV6.
In the IPCLKLNK
MO, SIPV6 and
CIPV6 must be set
to different values
when ICPT is set to
PTP and CNM is
not set to
L2_MULTICAST
and IPMODE is set
to IPV6.
When two
IPCLKLNK MOs
are configured on
the same board, the
values of SIPV6 in
the two MOs must
be different when
the following
conditions are met:
1. ICPT is set to
PTP and CNM is
not set to
L2_MULTICAST; 2.
IPMODE is set to
IPV6 in the two Less than 3
MOs. Read & Write Yes BS minutes
The PREHOPIP is
valid only when
DELAYTYPE in the
IPCLKLNK MO is Less than 3
set to P2P. Read & Write Yes BS minutes
The
PDELAYREQFREQ
is valid only when
DELAYTYPE in the
IPCLKLNK MO is Less than 3
set to P2P. Read & Write Yes BS minutes
In the SYNCETH
MO, when the value
of TYPE is set to
IN, the value of LN
must be 0.when the
value of TYPE is
set to OUT, the
value of LN must
be 1. Read Only N/A N/A N/A
Less than 3
Less than 3
Less than 3
When a MPT is
configured in the
slot corresponding
to the SN in the
SYNCETH MO, PN
is set to 0 or 1.
When a TRP MO is
configured in the
slot corresponding
to the SN in the
SYNCETH, the
value of PN ranges Less than 3
from 0 to 5. Read & Write Yes BS minutes
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
Less than 3
The SRCNO is valid
only when the clock
source specified by
the CLKSRC in the
TASM MO supports
more than one
clock link and the No (And no impact
value of MODE is on the UE in idle
set to MANUAL. Read & Write mode) N/A N/A
If MODE and
CLKSRC in the
TASM MO are set
to MANUAL and
TOD, respectively,
TYPE of the
corresponding TOD No (And no impact
MO must be set to on the UE in idle
IN. Read & Write mode) N/A N/A
The CLKSRC is
valid only when
MODE in the TASM
MO is set to
MANUAL.
When MODE is set
to MANUAL and
CLKSRC is set to
SYNCETH+IPCLK
or GPS+SYNCETH,
the value of MODE
can be changed to
AUTO only in the
following methods:
1. Change the
value of MODE
from MANUAL to
FREE, and then to
AUTO; 2. Change
the value of
CLKSRC to other
values, and then
change the value of
MODE to AUTO.
If MODE and
CLKSRC in the
TASM MO are set
to MANUAL and
TOD, respectively,
TYPE of the
corresponding TOD No (And no impact
MO must be set to on the UE in idle
IN. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
If ICPT and CNM in
an IPCLKLNK MO
are set to PTP and
UNICAST,
respectively, and
MODE and
CLKSRC in a
TASM MO are set
to MANUAL and
IPCLK, respectively,
SYNMODE in the
TASM MO can be
set to a value No (And no impact
ABSOLUTE or on the UE in idle
RELATIVE. Read & Write mode) N/A N/A
The PERIOD is
valid only when
ICPT in the
IPCLKLNK MO is
set to PTP and
SYNMODE in the No (And no impact
TASM MO is set to on the UE in idle
RELATIVE. Read & Write mode) N/A N/A
The TM is valid only

when ICPT in the
IPCLKLNK MO is
set to PTP and
ABSOLUTE. Read & Write mode) N/A N/A
If PROFILETYPE in
the IPCLKLNK MO
is set to G.8265.1,
CLKSYNCMODE in
the TASM MO must
be set to FREQ.
If IPMODE in the
IPCLKLNK MO is
set to IPV6, Services of the cells
CLKSYNCMODE in recover after the
the TASM MO must reference clock is
be set to FREQ. Read & Write Yes Cells locked again.


Services are
reference clock is
None Read & Write Yes BS qualified.

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
The DAY is valid

only when ICPT in
the IPCLKLNK MO
is set to PTP and
ABSOLUTE. Read & Write mode) N/A N/A
Less than 3
This parameter is
valid only when
BASEBANDEQMT
YPE in the
BASEBANDEQM
MO is set to UL or
ULDL. Read Only N/A N/A N/A
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle


No (And no impact
on the UE in idle


The TYPE of the
SUBRACK where
the BRI is located
must be BBU3900
or BBU3900-1U. Read Only N/A N/A N/A
The services
carried on the
board and the
services carried on
RF modules
connected to the Services are
baseband interrupted until the
None Read & Write Yes processing board. board is unblocked.
No (And no impact
on the UE in idle
Less than 2
None Read & Write Yes The operated board minutes



No (And no impact
on the UE in idle
The services
carried on the
board and the
services carried on
RF modules
connected to the Services are
baseband interrupted until the
No (And no impact
on the UE in idle
Less than 2



No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
LONGITUDEDEGF
ORMAT and
LATITUDEDEGFO
RMAT are valid
only when this
parameter is set to
Degree.
LONGITUDESECF
ORMAT and
LATITUDESECFO
RMAT are valid
only when this No (And no impact
parameter is set to on the UE in idle
Second. Read & Write mode) N/A N/A
This parameter is
GCDF is set to on the UE in idle
Degree. Read & Write mode) N/A N/A
If GCDF is set to
Second, this
LATITUDESECFO
RMAT must be
specified in the
format of
dd:mm:ss.ssss. dd
indicates the
degree ranging
from -90 to +90,
mm indicates the
minute ranging from
0 to 59, and ss.ssss
indicates the
second ranging
from 0 to 59.9999.
The value range of
this parameter is
from No (And no impact
-90:00:00.0000 to on the UE in idle
+90:00:00.0000. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
This parameter is
GCDF is set to on the UE in idle
Degree. Read & Write mode) N/A N/A
If GCDF is set to
Second, this
LONGITUDESECF
ORMAT must be
specified in the
format of
ddd:mm:ss.ssss.
ddd indicates the
degree ranging
from -180 to +180,
mm indicates the
minute ranging from
0 to 59, and ss.ssss
indicates the
second ranging
from 0 to 59.9999.
The value range of
this parameter is
-180:00:00.0000 to on the UE in idle
+180:00:00.0000. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
The changed site

names of a
separate-MPT base No (And no impact
station must be the on the UE in idle
same. Read & Write mode) N/A N/A
The changed NE
name must be the
same as the NE
name configured on
the M2000.For the
DBS3900
WCDMA/BTS3900
WCDMA/BTS3900A
WCDMA/BTS3900L
WCDMA/BTS3900
AL WCDMA base
station, the value of
this parameter must
be consistent with
the value of the
NODEBNAME
parameter in the
UNodeB MO of the
corresponding
logical base station No (And no impact
configured on the on the UE in idle
RNC. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

The TYPE of the
SUBRACK where
the BBP is located
must be BBU3900
When AT in the
RRUCHAIN MO is
set to PEERPORT,
the board specified
by HCN, HSRN and
HSN must have not
been configured.
When AT in the
RRUCHAIN MO is
set to PEERPORT,
if HSN equal to 2,
the BBP with the
value of SN equal
to 3 must have
been configured; if
HSN equal to 3, the
BBP with the value
of SN equal to 2
must have been
configured. Read Only N/A N/A N/A
The services
carried on the
baseband
processing unit and
the services carried
on RF modules
connected to the
baseband
None Read & Write Yes processing unit Less than 1 minute
RT set to MTXU
cannot be
configured on an
RRUCHAIN MO
when one of the
is met: 1. TYPE in
the BBP MO
specified by HCN,
HSRN, and HSN in
the RRUCHAIN MO
is not set to UBBP
and WM in this
BBP MO is not set
to HYBRID; 2. TT in
the RRUCHAIN MO
is set to RING, and
TYPE in the BBP
MO specified by
TCN, TSRN, and
TSN is not set to
UBBP and WM in
this BBP MO is not
set to HYBRID.
In the BBP MO,
when TYPE is set
to LBBP, WM must
be set to FDD,
TDD, The services
TDD_ENHANCE, carried on the
TDD_8T8R, baseband
TDD_TL or processing board
FDD_ATG. and the services
If the Board Type is carried on RF
UBBP, the WM modules connected
parameter cannot to the baseband
be specified. Read & Write Yes processing board Less than 1 minute
The services
carried on the
baseband
processing board
and the services
carried on RF
modules connected Services are
to the baseband interrupted until the
No (And no impact
on the UE in idle
Less than 2
The services
carried on the
baseband
processing unit and
If the Board Type is on RF modules
UBBP, the HCE connected to the
parameter cannot baseband
be specified. Read & Write Yes processing unit Less than 1 minute
In a BBP MO, when
the value of
CPRIEX is set to
ON, the value of
HPN must be
smaller than 3.
If CPRIEX in the
BBP MO is set to
ON and TT in the
RRUCHAIN MO is The services
not set to carried on the
CHAIN,the value of baseband
TPN must be processing unit and
smaller than 3. the services carried
If the Board Type is on RF modules
UBBP, the CPRIEX connected to the
parameter cannot baseband
be specified. Read & Write Yes processing unit Less than 1 minute
The services
carried on the
baseband
processing unit and
on RF modules
Only the UBBP connected to the
supports the BBWS baseband Less than 1.5
parameter. Read & Write Yes processing unit minute





The combination of
HCN and HSRN in
a BBPLINK MO
must be different
from the
combination of TCN
and TSRN in No (And no impact
another BBPLINK on the UE in idle
The combination of
HCN and HSRN in
a BBPLINK MO
must be different
from the
combination of TCN
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
The combination of
HCN and HSRN in
a BBPLINK MO
must be different
from the
combination of TCN
The combination of
HCN and HSRN in
a BBPLINK MO
must be different
from the
combination of TCN
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle





No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
MPN in the CCU

MOs under the No (And no impact
same manager unit on the UE in idle
must be the same. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
CCN in the CCU
MOs under the No (And no impact
same manager unit on the UE in idle
must be unique. Read & Write mode) N/A N/A
In the CCU MO, CS No (And no impact
is valid only when on the UE in idle
DCF is set to YES. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
CN, SRN and SN in

the CPRIPORT
must meet the
following
conditions: 1. when
CN is set to 0, SRN
must be set to 0~1,
4~5 or 60~254; 2.
when CN is set to
1~7, SRN must be
set to 0~1, 4~5; 3.
when CN is set to
8~62, SRN must be
set to 4~5; 4. when
SRN is set to 0~1,
SN must be set to
0~7; 5. when SRN
is set to 4~5 and
TYPE in the
CABINET is equal
to BTS3900AL, SN
must be set to 0~8;
6. when SRN is set
to 4~5 and TYPE in
the CABINET is not
equal to
BTS3900AL, SN
must be set to 0~5;
7. when SRN is set
to 60~254, SN must
be set to 0.
Command-specific
value ranges take
effect when you run
MML commands. Read Only N/A N/A N/A
CN, SRN and SN in
the CPRIPORT
must meet the
following
conditions: 1. when
CN is set to 0, SRN
must be set to 0~1,
4~5 or 60~254; 2.
when CN is set to
1~7, SRN must be
set to 0~1, 4~5; 3.
when CN is set to
8~62, SRN must be
set to 4~5; 4. when
SRN is set to 0~1,
SN must be set to
0~7; 5. when SRN
is set to 4~5 and
TYPE in the
CABINET is equal
to BTS3900AL, SN
must be set to 0~8;
6. when SRN is set
to 4~5 and TYPE in
the CABINET is not
equal to
BTS3900AL, SN
must be set to 0~5;
7. when SRN is set
to 60~254, SN must
be set to 0.
Command-specific
value ranges take
effect when you run
CN, SRN and SN in
the CPRIPORT
must meet the
following
conditions: 1. when
CN is set to 0, SRN
must be set to 0~1,
4~5 or 60~254; 2.
when CN is set to
1~7, SRN must be
set to 0~1, 4~5; 3.
when CN is set to
8~62, SRN must be
set to 4~5; 4. when
SRN is set to 0~1,
SN must be set to
0~7; 5. when SRN
is set to 4~5 and
TYPE in the
CABINET is equal
to BTS3900AL, SN
must be set to 0~8;
6. when SRN is set
to 4~5 and TYPE in
the CABINET is not
equal to
BTS3900AL, SN
must be set to 0~5;
7. when SRN is set
to 60~254, SN must
be set to 0.
Command-specific
value ranges take
effect when you run


No (And no impact
on the UE in idle
No (And no impact
on the UE in idle








No (And no impact
on the UE in idle




The TYPE of the
SUBRACK where
the TRP is located
must be BBU3900
In the TRP MO,the

SUBTYPE must be
set to one of the
following
values:1.UAEC;2.UI
EC;3.UUAS;4.UQE No (And no impact
C;5.UEOC;6.UTRP on the UE in idle
c;7.UIEB. Read & Write mode) N/A N/A









The TYPE of the

SUBRACK where
the USCU is
located must be
BBU3900 or
BBU3900-1U. Read Only N/A N/A N/A



No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
When MNTMODE
in the EQUIPMENT
MO is not set to
NORMAL,ET in the
EQUIPMENT MO No (And no impact
must be later than on the UE in idle
ST. Read & Write mode) N/A N/A
When MNTMODE
in the EQUIPMENT
MO is not set to
NORMAL,ET in the
EQUIPMENT MO No (And no impact
must be later than on the UE in idle
ST. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In the EQUIPMENT
MO, the value of
DVAH must be
smaller than or No (And no impact
equal to the value on the UE in idle
of DVAL minus 5. Read & Write mode) N/A N/A
In the EQUIPMENT
MO, the value of
DVAH must be
smaller than or No (And no impact
of DVAL minus 5. Read & Write mode) N/A N/A

No (And no impact
on the UE in idle
be greater than or
equal to
ALMTHRHLD.
In a RRU MO, if the
value of RT is not
PRRU,In a
EQUIPMENT MO,if
the value of
PROTOCOL is
TDL_IR,
the value of
ALMPROCTHRHL
D in RRU MO, must
be greater than or
equal to
ALMTHRHLD.
In a EQUIPMENT
MO,if the value of
PROTOCOL is
CPRI,
the value of
ALMPROCTHRHL
D in RFU MO, must
be greater than
ALMTHRHLD.
In a RRU MO, if the
value of RT is not
PRRU,
in a EQUIPMENT
MO,if the value of
PROTOCOL is
CPRI,
the value of
ALMPROCTHRHL
D in RRU MO, must
be greater than Less than 3
ALMTHRHLD. Read & Write Yes eNodeB minutes
No (And no impact
on the UE in idle

SUBRACK MO
must be set to 0
when TYPE is set
to BBU3900 or
BBU3900-1U, and
TYPE in the
CABINET MO is set
to one of the
following values:
OMB, BTS3900D.
SRN in a TCU MO
can be set to 14
only when TYPE in
the CABINET MO
where the TCU MO
is located is set to
VIRTUAL.
SN in the TCU MO
must be set to 0
when TYPE in a
CABINET MO
where the TCU MO
VIRTUAL, APM30,
APM100, APM200,
TMC, OMB, or
BTS3012AE_SRAN
.
SN in the TCU MO
must be set to a
value smaller than
3 when TYPE in a
CABINET MO
where the TCU MO
is located is set to No (And no impact
BBC or on the UE in idle
BTS3900AL. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
In a SUBRACK
MO, when TYPE is
set to BBU3900 or
BBU3900-1U, CN
must be smaller
than or equal to 7. Read Only N/A N/A N/A
BBU3900-1U, and
TYPE in the
CABINET MO is set
to one of the
following values:
OMB, BTS3900D.
In a SUBRACK
MO, when TYPE is
set to BBU3900 or
BBU3900-1U, SRN
must be set to 0 or
1.
In a SUBRACK
MO, when TYPE is
set to RFU, SRN
must be set to 4 or
5.
In a SUBRACK
MO, when TYPE is
set to TCU, SRN
must be set to 8 or
14.
In a SUBRACK
MO, when TYPE is
set to FMU, SRN
must be set to 11 or
12.
In a SUBRACK
MO, when TYPE is
set to EMU, the
value of SRN must
range from 40 to
59.
In a SUBRACK
MO, when TYPE is
set to PMU, SRN
BTS3012AE_SRAN
, BTS3012II_SRAN,
BTS3900AL and
ILC29.
TYPE in the
SUBRACK MO can
be set to RFU only
when TYPE in the
CABINET MO is set
to one of the
following values:
RFC, BTS3900,
BTS3900L,
VIRTUAL,
BTS3012_SRAN,
BTS3012AE_SRAN
, BTS3012II_SRAN,
and BTS3900AL.
TYPE in the
SUBRACK MO can
be set to BBU3900
or BBU3900-1U
only when TYPE in
the CABINET MO
is set to one of the
following values:
APM30, APM100,
APM200, TMC,
OMB, BTS3900,
BTS3900L,
BTS3900AL,
BTS3900D,
PS4890, VIRTUAL,
BTS3012_SRAN,
BTS3012AE_SRAN
, BTS3012II_SRAN
and TP48600A. Read Only N/A N/A N/A
No (And no impact
on the UE in idle




No (And no impact
on the UE in idle
The manager unit

of an EMU MO
must be one of the
following: 1. A
SUBRACK MO with
the value of SRN
smaller than or
equal to 1; 2. A
RRU MO with the
value of SRN
ranging from 60 to No (And no impact
254; 3. A CCU MO on the UE in idle
with SRN set to 15. Read & Write mode) N/A N/A
In an EMU MO,
when MSRN is set
to 15, the value of
MPN must be
smaller than or
equal to 7. When
the value of MSRN
is greater than or
equal to 60, the
value of MPN must
be equal to 0.
When the value of
MSRN is smaller
than or equal to 1,
the value of MPN No (And no impact
than or equal to 1. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
In an EMU MO, the
value of TUTHD
minus the value of
TLTHD must be
greater than or
equal to 3 degree No (And no impact
Celsius (5 degree on the UE in idle
Fahrenheit). Read & Write mode) N/A N/A
In an EMU MO, the

value of TUTHD
minus the value of
TLTHD must be
greater than or
In an EMU MO, the

value of HUTHD
minus the value of
HLTHD must be No (And no impact
equal to 5. Read & Write mode) N/A N/A
In an EMU MO, the

value of HUTHD
minus the value of
HLTHD must be No (And no impact
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle




No (And no impact
on the UE in idle
The manager unit
of a FMU MO must
be one of the
following: 1. A
SUBRACK MO with
the value of SRN
smaller than or
equal to 1; 2. A
RRU MO with the
value of SRN
In a FMU MO, when
MSRN is set to 15,
the value of MPN
must be smaller
than or equal to 7.
When the value of
MSRN is greater
than or equal to 60,
the value of MPN
must be equal to 0.
When the value of
MSRN is smaller
than or equal to 1,
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

Services are
parameter is
Services are
parameter is




SRN in a TCU MO
can be set to 14
only when TYPE in
the CABINET MO
where the TCU MO
VIRTUAL. Read Only N/A N/A N/A
SN in the TCU MO
must be set to 0
when TYPE in a
CABINET MO
where the TCU MO
VIRTUAL, APM30,
APM100, APM200,
TMC, OMB, or
BTS3012AE_SRAN
.
SN in the TCU MO
must be set to a
value smaller than
3 when TYPE in a
CABINET MO
where the TCU MO
BBC or
BTS3900AL. Read Only N/A N/A N/A
No (And no impact
on the UE in idle
The manager unit
of a TCU MO must
be one of the
following: 1. A
SUBRACK MO with
SRN smaller than
or equal to 1; 2. A
RRU MO with SRN
In a TCU MO, when

MSRN is set to 15,
the value of MPN
must be smaller
than or equal to 7.
When the value of
MSRN is greater
than or equal to 60,
the value of MPN
must be equal to 0.
When the value of
MSRN is smaller
than or equal to 1,
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle


Services are
parameter is




In the HTCDPA
MO, the value of
HTCP must be
greater than LTCP No (And no impact
1 degree Celsius (2 on the UE in idle
degree Fahrenheit). Read & Write mode) N/A N/A
In the HTCDPA
MO, the value of
HTCP must be
greater than LTCP No (And no impact
1 degree Celsius (2 on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
The manager unit
of a PMU MO must
be one of the
following: 1. A
SUBRACK MO with
the value of SRN
smaller than or
equal to 1; 2. A
RRU MO with the
value of SRN
In a PMU MO,
when MSRN is set
to 15, the value of
MPN must be
smaller than or
equal to 7. When
the value of MSRN
is greater than or
equal to 60, the
value of MPN must
be equal to 0.
When the value of
MSRN is smaller
than or equal to 1,
No (And no impact
on the UE in idle
BATTERY MO
corresponding to
the PMU MO with
PTYPE set to a
value other than
SC48200 must be
smaller than LSDV
in the PMU MO.
If PTYPE in the
PMU MO is set to
EPS4815, SN in the
lower-level PSU
MO must be set to
1 or 2.
If PTYPE in the
PMU MO is set to
APM30, SN in the
lower-level PSU
MO must be greater
than or equal to 1
and smaller than or
equal to 5.
If PTYPE in the
PMU MO is not set
to any of the
following values,
SN in the lower-
level PSU MO must
be greater than or
equal to 1 and
smaller than or
equal to 3:
EPS4815,
SC48200,
EPS48200,
TP48300A, ETP,
and APM30. Read Only N/A N/A N/A
In a PMU MO,
when PTYPE is not
set to SC48200, the
value of ACVLTHD No (And no impact
than ACVUTHD. Read & Write mode) N/A N/A
In a PMU MO,
when PTYPE is not
set to SC48200, the
value of ACVLTHD No (And no impact
than ACVUTHD. Read & Write mode) N/A N/A
value of LSDV must
be smaller than
DCVLTHD when
the following
conditions are met:
1. PTYPE is set to
APM30, APM100,
APM200, EPS4890,
EPS48200,
TP48300A, or ETP;
2. LSDF is set to
ENABLE.
In a PMU MO,
when PTYPE is set
to SC48200, the
value of DCVLTHD
must be greater
and smaller than or
equal to 500, and
the value of
DCVUTHD must be
greater than or
equal to 580 and
smaller than or
equal to 600.
In a PMU MO,
when the values of
PTYPE and LSDF
are set to SC48200
and ENABLE,
respectively, the
value of DCVLTHD
minus the value of
LSDV must be No (And no impact
DCVUTHD is set to
580 by default.
In a PMU MO,
when PTYPE is set
to SC48200, BCV
in the BATTERY
MO corresponding
to the PMU MO
must be smaller
than or equal to
DCVUTHD in the
PMU MO minus 15.
In a PMU MO,
when PTYPE is set
to a value other
than SC48200,
BCV in the
BATTERY MO
corresponding to
the PMU MO must
be smaller than
DCVUTHD in the
PMU MO minus 10.
In a PMU MO,
when PTYPE is set
to SC48200, the
value of DCVLTHD
must be greater
and smaller than or
equal to 500, and
the value of
DCVUTHD must be
greater than or
equal to 580 and No (And no impact
smaller than or on the UE in idle
PTYPE in the PMU
other than
SC48200.
SDV in the
BATTERY MO
corresponding to
the PMU MO must
be smaller than
LSDV in the PMU
under the following
conditions: 1. LSDF
in the PMU MO is
set to ENABLE; 2.
LVSDF in the
BATTERY MO
corresponding to
the PMU MO is set
to ENABLE; 3.
PTYPE in the PMU
other than
SC48200.
When the values of
LSDF in the PMU
MO and LVSDF in
the BATTERY MO
are set to ENABLE,
SDV in the
BATTERY MO
corresponding to
the PMU MO with
PTYPE set to a
value other than
SC48200 must be No (And no impact
smaller than LSDV on the UE in idle
in the PMU MO. Read & Write mode) N/A N/A
ENABLE.
In a PMU MO,
when PTYPE and
LSDF are set to
SC48200 and
ENABLE,
respectively, the
value of LSDV must
be greater than or
equal to 455 and
smaller than or
equal to 485.
In a PMU MO,
when the values of
PTYPE and LSDF
are set to SC48200
and ENABLE,
respectively, the
value of DCVLTHD
minus the value of
LSDV must be
greater than or
equal to 5.
When the values of
LSDF in the PMU
MO and LVSDF in
the BATTERY MO
are set to ENABLE,
SDV in the
BATTERY MO
corresponding to
the PMU MO with
PTYPE set to a
value other than
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In a PMU MO,
AHLTHD must be No (And no impact
AHUTHD. Read & Write mode) N/A N/A
In a PMU MO,
AHLTHD must be No (And no impact
AHUTHD. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle








No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

If PTYPE in the
upper-level PMU
MO of the
BATTERY MO is
set to a value other
than SC48200,
INSTALLTYPE in
the BATTERY MO
must be set to
INNER or OUTER.
If PTYPE in the
upper-level PMU
MO of the
BATTERY MO is
set to SC48200,
INSTALLTYPE in
the BATTERY MO No (And no impact
must be set to on the UE in idle
OUTER. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
BCV in the
BATTERY MO must
be greater than or
equal to 433 and
smaller than or
equal to 576.
If PTYPE in the
upper-level PMU
MO of the
BATTERY MO is
than SC48200,
BCV in the
BATTERY MO must
be greater than
FCV.
If PTYPE in the
upper-level PMU
MO of the
BATTERY MO is
set to SC48200,
BCV in the
BATTERY MO must
be greater than or
equal to 542 and
smaller than or
equal to 575.
If PTYPE in the
upper-level PMU
MO of the
BATTERY MO is
set to SC48200,
BCV in the
BATTERY MO must
be greater than or No (And no impact
of FCV plus 22. Read & Write mode) N/A N/A
MO of the
BATTERY MO is
than SC48200, and
BN in the
BATTERY MO is 1,
BC1 in the
BATTERY MO must
be greater than or
equal to 5 and
smaller than or
equal to 5000; If
PTYPE in the
upper-level PMU
MO of the
BATTERY MO is
than SC48200, and
BN in the
BATTERY MO is 2,
BC1 and BC2 in
the BATTERY MO
must be greater
than or equal to 5
and smaller than or
equal to 5000.
If PTYPE in the
upper-level PMU
MO of the
BATTERY MO is
set to SC48200,
BC1 in the
BATTERY MO must
be greater than or
equal to 50 and No (And no impact
smaller than or on the UE in idle
No (And no impact
on the UE in idle
FCV in the
BATTERY MO must
be greater than or
equal to 432 and
smaller than or
equal to 575.
If PTYPE in the
upper-level PMU
MO of the
BATTERY MO is
than SC48200,
BCV in the
BATTERY MO must
be greater than
FCV.
If PTYPE in the
upper-level PMU
MO of the
BATTERY MO is
set to SC48200,
FCV in the
BATTERY MO must
be greater than or
equal to 520 and
smaller than or
equal to 563.
If PTYPE in the
upper-level PMU
MO of the
BATTERY MO is
set to SC48200,
BCV in the
BATTERY MO must
of FCV plus 22. Read & Write mode) N/A N/A
When PTYPE in the

upper-level PMU
MO of the
BATTERY MO is
set to SC48200 and
HTSDF in the
BATTERY MO is
set to ENABLE,
SDT in the
BATTERY MO must
be greater than or
equal to 45 degree
Celsius (113 degree
Fahrenheit) and
smaller than or
Celsius (158 on the UE in idle
and smaller than or
equal to 70 degree
Celsius (158
degree Fahrenheit).
When PTYPE in the
upper-level PMU
MO of the
BATTERY MO is
set to SC48200 and
HTSDF in the
BATTERY MO is
set to ENABLE,
SDT in the
BATTERY MO must
be greater than or
equal to 45 degree
Celsius (113 degree
Fahrenheit) and
smaller than or
equal to 70 degree
Celsius (158
degree Fahrenheit).
When PTYPE in the
upper-level PMU
MO of the
BATTERY MO is
set to SC48200 and
HTSDF in the
BATTERY MO is
set to ENABLE,
SDT must be
greater than or
equal to TUTHD in
the BATTERY MO
plus +10 degree No (And no impact
LVSDF in the
BATTERY MO
corresponding to
the PMU MO is set
to ENABLE; 3.
PTYPE in the PMU
other than
SC48200.
When PTYPE in the
upper-level PMU
MO of the
BATTERY MO is
set to SC48200 and
LVSDF in the
BATTERY MO is
set to ENABLE,
SDV in the
BATTERY MO must
be greater than or
equal to 450 and
smaller than or
equal to 480.
When the values of
LSDF in the PMU
MO and LVSDF in
the BATTERY MO
are set to ENABLE,
SDV in the
BATTERY MO
corresponding to
the PMU MO with
PTYPE set to a
value other than
BATTERY MO is
than SC48200,
SDV in the
BATTERY MO must
be greater than or
equal to 350 and
smaller than or
equal to 553.
When PTYPE in the
upper-level PMU
MO of the
BATTERY MO is
set to SC48200 and
LVSDF in the
BATTERY MO is
set to ENABLE,
SDV in the
BATTERY MO must
be greater than or
equal to 450 and
smaller than or
equal to 480.
When the values of
LSDF in the PMU
MO and LVSDF in
the BATTERY MO
are set to ENABLE,
SDV in the
BATTERY MO
corresponding to
the PMU MO with
PTYPE set to a
value other than
If PTYPE in the
upper-level PMU
MO of the
BATTERY MO is
than SC48200,
TCC in the
BATTERY MO must
be smaller than or
equal to 500
mV/degree Celsius
(278 mV/degree
Fahrenheit).
If PTYPE in the
upper-level PMU
MO of the
BATTERY MO is
set to SC48200,
TCC in the
BATTERY MO must
be smaller than or
equal to 100
mV/degree Celsius No (And no impact
(56 mV/degree on the UE in idle
No (And no impact
on the UE in idle
equal to 35 degree
Celsius (39 degree
Fahrenheit) and
smaller than or
equal to 80 degree
Celsius (176
degree Fahrenheit).
If PTYPE in the
upper-level PMU
MO of the
BATTERY MO is
set to SC48200,
TUTHD in the
BATTERY MO must
be greater than or
equal to 35 degree
Celsius (95 degree
Fahrenheit) and
smaller than or
equal to 60 degree
Celsius (140
degree Fahrenheit).
When PTYPE in the
upper-level PMU
MO of the
BATTERY MO is
set to SC48200 and
HTSDF in the
BATTERY MO is
set to ENABLE,
SDT must be
greater than or
equal to TUTHD in
the BATTERY MO
plus +10 degree No (And no impact
In a PMU, if PTYPE
is not set to No (And no impact
TP48300A,BATTER on the UE in idle
Y BN must be 1. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle




If PTYPE in the
upper-level PMU
MO of the
BATTERY MO is
than SC48200, and
BN in the
BATTERY MO is 1,
BC1 in the
BATTERY MO must
be greater than or
equal to 5 and
smaller than or
equal to 5000; If
PTYPE in the
upper-level PMU
MO of the
BATTERY MO is
than SC48200, and
BN in the
BATTERY MO is 2,
BC1 and BC2 in
the BATTERY MO
must be greater
than or equal to 5 No (And no impact
and smaller than or on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In a BATCTPA MO,
when ATMODE is
set to PERIOD or
PERIODPOWERC
UT, the value of
TDSTM must be No (And no impact
greater than the on the UE in idle
value of DDSTM. Read & Write mode) N/A N/A
In a BATCTPA MO,
when ATMODE is
set to PERIOD or
PERIODPOWERC
UT, the value of
TDSTM must be No (And no impact
greater than the on the UE in idle
value of DDSTM. Read & Write mode) N/A N/A


TP48300A, SN in
the lower-level PSU
MO must be greater
than or equal to 1
and smaller than or
equal to 6.
If PTYPE in the
PMU MO is set to
ETP, SN in the
lower-level PSU
MO must be greater
than or equal to 1
and smaller than or
equal to 7.
If PTYPE in the
PMU MO is set to
APM30, SN in the
lower-level PSU
MO must be greater
than or equal to 1
and smaller than or
equal to 5.
If PTYPE in the
PMU MO is not set
to any of the
following values,
SN in the lower-
level PSU MO must
be greater than or
equal to 1 and
smaller than or
equal to 3:
EPS4815,
SC48200,
EPS48200,
TP48300A, ETP,
and APM30. Read Only N/A N/A N/A




No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
ranges from 40 to
59; 2. The value of
PN ranges from 32
to 35; 3. SW is set
to ON.
In the ALMPORT
MO, PT must be set
to VALUE when all
the following
conditions are met:
1. The device
corresponding to
the ALMPORT MO
is an EMU MO, and
the value of SRN in
this EMU MO
ranges from 40 to
59; 2. The value of
PN ranges from 32
to 35; 3. SW is set
to ON.
In the ALMPORT
MO, PT must be set
to BOOL when all
the following
conditions are met:
1. The device
corresponding to
the ALMPORT MO
is an EMU MO, and
the value of SRN in
this EMU MO
ranges from 40 to
59; 2. The value of
PN ranges from 0
to 31; 3. SW is set
to ON. Read Only N/A N/A N/A
In the ALMPORT
MO, when SW is
set to ON and PT is
to VALUE, SMLL,
SMUL, SOLL,
SOUL, and ST
must be specified.
When SW is set to
ON and PT is set to No (And no impact
BOOL, the AVOL on the UE in idle
must be specified. Read & Write mode) N/A N/A
In the ALMPORT
MO, when the
values of SW and
PT are set to ON
and VALUE,
respectively, the
value of UL must
be greater than the
value of LL.
In the ALMPORT
MO, when the
values of SW and
PT are set to ON
and VALUE,
respectively, the
value of SMUL
than or equal to the on the UE in idle
value of UL. Read & Write mode) N/A N/A
In the ALMPORT
MO, when the
values of SW and
PT are set to ON
and VALUE,
respectively, the
value of UL must
be greater than the
value of LL.
In the ALMPORT
MO, when the
values of SW and
PT are set to ON
and VALUE,
respectively, the
value of SMLL must
be smaller than or No (And no impact
of LL. Read & Write mode) N/A N/A
In the ALMPORT
MO, when SW is
set to ON and PT is
to VALUE, SMLL,
SMUL, SOLL,
SOUL, and ST
must be specified.
When SW is set to
ON and PT is set to
BOOL, the AVOL
must be specified.
In the ALMPORT
MO, the ST is valid No (And no impact
only when PT is set on the UE in idle
to VALUE. Read & Write mode) N/A N/A
The SMUL is valid
only when PT in the
ALMPORT MO is
set to VALUE.
In the ALMPORT
MO, when SW is
set to ON and PT is
to VALUE, SMLL,
SMUL, SOLL,
SOUL, and ST
must be specified.
When SW is set to
ON and PT is set to
BOOL, the AVOL
must be specified.
In the ALMPORT
MO, when the
values of SW and
PT are set to ON
and VALUE,
respectively, the
value of SMUL
must be greater
than the value of
SMLL.
In the ALMPORT
MO, when the
values of SW and
PT are set to ON
and VALUE,
respectively, the
value of SMUL
than or equal to the on the UE in idle
value of UL. Read & Write mode) N/A N/A
The SMLL is valid
only when PT in the
ALMPORT MO is
set to VALUE.
In the ALMPORT
MO, when SW is
set to ON and PT is
to VALUE, SMLL,
SMUL, SOLL,
SOUL, and ST
must be specified.
When SW is set to
ON and PT is set to
BOOL, the AVOL
must be specified.
In the ALMPORT
MO, when the
values of SW and
PT are set to ON
and VALUE,
respectively, the
value of SMUL
must be greater
than the value of
SMLL.
In the ALMPORT
MO, when the
values of SW and
PT are set to ON
and VALUE,
respectively, the
value of SMLL must
be smaller than or No (And no impact
of LL. Read & Write mode) N/A N/A
The SOUL is valid
only when PT in the
ALMPORT MO is
set to VALUE.
In the ALMPORT
MO, when SW is
set to ON and PT is
to VALUE, SMLL,
SMUL, SOLL,
SOUL, and ST
must be specified.
When SW is set to
ON and PT is set to
BOOL, the AVOL
must be specified.
In the ALMPORT
MO, when the
values of SW and
PT are set to ON
and VALUE,
respectively, the
value of SOUL
than the value of on the UE in idle
SOLL. Read & Write mode) N/A N/A
The SOLL is valid

only when PT in the
ALMPORT MO is
set to VALUE.
In the ALMPORT
MO, when SW is
set to ON and PT is
to VALUE, SMLL,
SMUL, SOLL,
SOUL, and ST
must be specified.
When SW is set to
ON and PT is set to
BOOL, the AVOL
must be specified.
In the ALMPORT
MO, when the
values of SW and
PT are set to ON
and VALUE,
respectively, the
value of SOUL
SOLL. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

Each AAMU MO
must have a unique
combination of CN,
SRN, and SN
among all MOs as
follows: RRU,
RHUB, AAMU. Read Only N/A N/A N/A
Each AAMU MO
must have a unique
combination of CN,
SRN, and SN
among all MOs as
follows: RRU,
Each AAMU MO
must have a unique
combination of CN,
SRN, and SN
among all MOs as
follows: RRU,
Each AAMU MO
must have a unique
value for PS among
all MOs configured
on the same
RRUCHAIN MO.
The value of PS in
an AAMU MO must
be less than the
total number of
RFU MOs with TP
set to TRUNK,
AAMU MOs with
TP set to TRUNK,
RRU MOs, and
RHUB MOs of the
RRUCHAIN MO
where the AAMU
MO is configured. Read Only N/A N/A N/A

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
Services carried on
the specified TX Less than 2
None Read & Write Yes channel minutes
Until the execution

of the MOD AARU
Services carried by command is
None Read & Write Yes the AARU successful
VRETNO in
different AARU MO
cannot be set to be
the same value. Read Only N/A N/A N/A

No (And no impact
on the UE in idle

Each RHUB MO
must have a unique
combination of CN,
SRN, and SN
among all MOs as
follows: RRU,
Each RHUB MO
must have a unique
combination of CN,
SRN, and SN
among all MOs as
follows: RRU,
Each RHUB MO
must have a unique
combination of CN,
SRN, and SN
among all MOs as
follows: RRU,
TT in the
RRUCHAIN MO
where the RHUB
MO is located must
be set to CHAIN. Read Only N/A N/A N/A
Each RHUB MO
must have a unique
value for PS among
all MOs configured
on the same
RRUCHAIN MO.
The value of PS in
a RHUB MO must
be smaller than the
total number of
RHUBMOs on the
RRUCHAIN MO No (And no impact
where the RHUB on the UE in idle
MO is located. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle



No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
BRKPOS1 or is
greater than or
equal to
BRKPOS2; 3.
BRKPOS1 and
BRKPOS2 are set
to the same value.
When TT in the
RRUCHAIN MO
where the RRU or
RFU MO is located
is set to CHAIN,
and TP in the RRU
MO or TP in the
RFU MO is set to
TRUNK, one of the
must be met: 1.
When BRKPOS1 in
the RRUCHAIN MO
is not set to 255,
PS in the RRU MO
or PS in the RFU
must be greater
than or equal to
BRKPOS1. 2.
When BRKPOS1 in
the RRUCHAIN MO
is set to 255, PS in
the RRU MO or PS
in the RFU MO
must be the same
as the total number
of RRU, RFU, and
RHUB MOs on the
trunk of the current
RRUCHAIN MO. Read Only N/A N/A N/A
The total number of

RRU and RFU MOs
on the RRUCHAIN
MO specified by
RCN must be
smaller than or
equal to 72. In
addition, the total
number of RRU and
RFU MOs with TP
not set to BRANCH
must be smaller
The total number of
RRU and RFU MOs
on the RRUCHAIN
MO specified by
RCN must be
smaller than or
equal to 72. In
addition, the total
number of RRU and
RFU MOs with TP
not set to BRANCH
must be smaller
Until the execution

of the MOD RRU
Services carried by command is
None Read & Write Yes the RRU or RFU successful
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle


No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
Cells carried on this Less than 3

None Read & Write Yes RRU/RFU minutes


No (And no impact
on the UE in idle



In the RFU MO,

when
RFCONNTYPE is
set to
INTRA_SYS_INTE
RCONN, the
combination of CN,
SRN, SN cannot be
the same as the
combination of
RFCONNCN2,
RFCONNSRN2,
RFCONNSN2. Read Only N/A N/A N/A
In the RFU MO,

when
RFCONNTYPE is
set to
INTRA_SYS_INTE
RCONN, the
combination of CN,
SRN, SN cannot be
the same as the
combination of
RFCONNCN2,
RFCONNSRN2,
In a CABINET MO,
if the value of TYPE
is not BTS3900AL,
the value of SN in
the RFU MO is
smaller than 5.
If RT in the RFU
MO is set to MTXU,
SN in the RFU MO
can only be set to
1, 3, or 5.
In the RFU MO,
when
RFCONNTYPE is
set to
INTRA_SYS_INTE
RCONN, the
combination of CN,
SRN, SN cannot be
the same as the
combination of
RFCONNCN2,
RFCONNSRN2,
An RFU MO with
RT set to MTXU
cannot be
configured on an
RRUCHAIN MO
when one of the
is met: 1. TYPE in
the BBP MO
specified by HCN,
HSRN, and HSN in
the RRUCHAIN MO
is not set to UBBP
and WM in this
BBP MO is not set
to HYBRID; 2. TT in
the RRUCHAIN MO
is set to RING, and
TYPE in the BBP
MO specified by
TCN, TSRN, and
TSN is not set to
UBBP and WM in
this BBP MO is not
set to HYBRID.
When FLAG in the
RFU MO is not set
to 0, RT in the RFU
MO must be set to
WRFU or MRFU.
When RT in the
RFU MO is set to
LRFU, TT in the
RRUCHAIN MO
corresponding to
RCN cannot be set
to LOADBALANCE. Read Only N/A N/A N/A
No (And no impact
on the UE in idle




No (And no impact
on the UE in idle
In a EQUIPMENT
MO,if the value of
PROTOCOL is
TDL_IR,
the value of
ALMPROCTHRHL
D in RFU MO, must
be greater than or
equal to
ALMTHRHLD.
In a EQUIPMENT
MO,if the value of
PROTOCOL is
CPRI,
the value of
ALMPROCTHRHL
D in RFU MO, must
be greater than No (And no impact
ALMTHRHLD. on the UE in idle
In a EQUIPMENT
MO,if the value of
PROTOCOL is
TDL_IR,
the value of
ALMPROCTHRHL
D in RFU MO, must
be greater than or
equal to
ALMTHRHLD.
In a EQUIPMENT
MO,if the value of
PROTOCOL is
CPRI,
the value of
ALMPROCTHRHL
D in RFU MO, must
Each RFU MO must

have a unique
value for PS among
all MOs configured
on the same
RRUCHAIN MO.
The value of PS in
an RFU MO must
be less than the
total number of
RFU MOs with TP
set to TRUNK,
AAMU MOs with
TP set to TRUNK,
RRU MOs, and
RHUB MOs of the
RRUCHAIN MO
where the RFU MO
is configured.
When RT in the
RFU MO is set to
LRFU, TT in the
RRUCHAIN MO
corresponding to
RCN cannot be set
to LOADBALANCE.
The total number of

RRU and RFU MOs
on the RRUCHAIN
MO specified by
RCN must be
smaller than or
equal to 72. In
addition, the total
number of RRU and
RFU MOs with TP
not set to BRANCH
must be smaller
RS in a RFU MO
cannot be set to
WL, TDL and TL.
If RT in the RFU
MO is set to WRFU
or MTXU,
RS in the RFU MO Until the execution
must be equal to of the MOD RRU
UO. Services carried by command is
Read & Write Yes the RRU or RFU successful
RXNUM and
TXNUM in the RFU
MO cannot be set
to 0 at the same No (And no impact
time. on the UE in idle
RXNUM and
TXNUM in the RFU
MO cannot be set
to 0 at the same No (And no impact
time. on the UE in idle


No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
When
RFCONNTYPE in
an RFU MO is set
to
INTRA_SYS_INTE
RCONN, there must
be another RFU
MO whose CN,
SRN and SN are
set to the values of
RFCONNCN2,
RFCONNSRN2,
and RFCONNSN2,
respectively. Cells carried on this Less than 3
Read & Write Yes RRU/RFU minutes
When
RFCONNTYPE in
an RFU MO is set
to
INTRA_SYS_INTE
RCONN, there must
be another RFU
MO whose CN,
SRN and SN are
RFCONNCN2,
RFCONNSRN2,
and RFCONNSN2,
When
RFCONNTYPE in
an RFU MO is set
to
INTRA_SYS_INTE
RCONN, there must
be another RFU
MO whose CN,
SRN and SN are
RFCONNCN2,
RFCONNSRN2,
and RFCONNSN2,


No (And no impact
on the UE in idle
In the RRU MO,

when
RFCONNTYPE is
set to
INTRA_SYS_INTE
RCONN, the
combination of CN,
SRN, SN cannot be
the same as the
combination of
RFCONNCN2,
RFCONNSRN2,
RFCONNSN2.
Each RRU MO
must have a unique
combination of CN,
SRN, and SN
among all MOs as
follows: RRU,
In the RRU MO,
when
RFCONNTYPE is
set to
INTRA_SYS_INTE
RCONN, the
combination of CN,
SRN, SN cannot be
the same as the
combination of
RFCONNCN2,
RFCONNSRN2,
RFCONNSN2.
Each RRU MO
must have a unique
combination of CN,
SRN, and SN
among all MOs as
follows: RRU,
In the RRU MO,

when
RFCONNTYPE is
set to
INTRA_SYS_INTE
RCONN, the
combination of CN,
SRN, SN cannot be
the same as the
combination of
RFCONNCN2,
RFCONNSRN2,
RFCONNSN2.
Each RRU MO
must have a unique
combination of CN,
SRN, and SN
among all MOs as
follows: RRU,
No (And no impact
on the UE in idle
needs to be reset
after the RT of this
RRU MO is
changed.
In an RRU MO,
when RS is set to
TDL, RT must be
set to MRRU, AIRU,
LRRU, MPMU, or
MPRF.
When LCPSW in
the RRU MO is set
to Disable, RT in
the RRU MO must
be set to MRRU or
AIRU.
When FLAG in the
RRU MO is not set
to 0, RT in the RRU
MO must be set to
MRRU or AIRU.
When AT in the
RRUCHAIN is set
to PEERPORT, the
RT in the RRU on
this RRUCHAIN
must be set to
MRRU or PRRU or
AIRU.
In the RRU MO, RT
must be set to
MRRU when RS is
set to WL.
In the RRU MO, RT
must be set to
MPMU when RS is
set to LFTD. Read Only N/A N/A N/A
No (And no impact
on the UE in idle



No (And no impact
on the UE in idle
In a RRU MO, if the
value of RT is not
PRRU,In a
EQUIPMENT MO,if
the value of
PROTOCOL is
TDL_IR,
the value of
ALMPROCTHRHL
D in RRU MO, must
be greater than or
equal to
ALMTHRHLD.
In a RRU MO, if the
value of RT is not
PRRU,
in a EQUIPMENT
MO,if the value of
PROTOCOL is
CPRI,
the value of
ALMPROCTHRHL
D in RRU MO, must
In a RRU MO, if the
value of RT is not
PRRU,In a
EQUIPMENT MO,if
the value of
PROTOCOL is
TDL_IR,
the value of
ALMPROCTHRHL
D in RRU MO, must
be greater than or
equal to
ALMTHRHLD.
In a RRU MO, if the
value of RT is not
PRRU,
in a EQUIPMENT
MO,if the value of
PROTOCOL is
CPRI,
the value of
ALMPROCTHRHL
D in RRU MO, must
Each RRU MO
must have a unique
value for PS among
all MOs configured
on the same
RRUCHAIN MO.
The value of PS in
an RRU MO must
be less than the
total number of
RFU MOs with TP
set to TRUNK,
AAMU MOs with
TP set to TRUNK,
RRU MOs, and
RHUB MOs of the
RRUCHAIN MO
where the RRU MO
is configured.
The total number of
RRU and RFU MOs
on the RRUCHAIN
MO specified by
RCN must be
smaller than or
equal to 72. In
addition, the total
number of RRU and
RFU MOs with TP
not set to BRANCH
must be smaller
The total number of

RRU and RFU MOs
on the RRUCHAIN
MO specified by
RCN must be
smaller than or
equal to 72. In
addition, the total
number of RRU and
RFU MOs with TP
not set to BRANCH
must be smaller
In the RRU MO, RT
must be set to
MRRU when RS is
set to WL.
If RT in the RRU
MO is set to MRXU,
RS in the RRU MO
must be equal to
UO.
If RT in the RRU
MO is set to PRRU,
RS in the RRU MO
must be equal to
UO or LO or UL.
If RT in the RRU
MO is set to PRRU
and TP is set to
BRANCH,
RS in the RRU MO
must be equal to
UO.
In the RRU MO, RT
must be set to Until the execution
MPMU when RS is of the MOD RRU
set to LFTD. Services carried by command is
Read & Write Yes the RRU or RFU successful
In an RRU MO,
when RT is set to
MPRF, RXNUM and
TXNUM must be
set to 2.
In an RRU MO,
when RT is set to
MPMU, RXNUM
and TXNUM must
be set to 0.
In an RRU MO,
when RT is not set
to MPMU, RXNUM
and TXNUM cannot
be set to 0 No (And no impact
simultaneously. on the UE in idle
In an RRU MO,
when RT is set to
MPRF, RXNUM and
TXNUM must be
set to 2.
In an RRU MO,
when RT is set to
MPMU, RXNUM
and TXNUM must
be set to 0.
In an RRU MO,
when RT is not set
to MPMU, RXNUM
and TXNUM cannot
be set to 0 No (And no impact
simultaneously. on the UE in idle


No (And no impact
on the UE in idle
In the RRU MO,

when RT is set to
PRRU, the RFDS No (And no impact
cannot be specified. on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
When
RFCONNTYPE in
an RRU MO is set
to
INTRA_SYS_INTE
RCONN, there must
be another RRU
MO whose CN,
SRN and SN are
RFCONNCN2,
RFCONNSRN2,
and RFCONNSN2,
When
RFCONNTYPE in
an RRU MO is set
to
INTRA_SYS_INTE
RCONN, there must
be another RRU
MO whose CN,
SRN and SN are
RFCONNCN2,
RFCONNSRN2,
and RFCONNSN2,
When
RFCONNTYPE in
an RRU MO is set
to
INTRA_SYS_INTE
RCONN, there must
be another RRU
MO whose CN,
SRN and SN are
RFCONNCN2,
RFCONNSRN2,
and RFCONNSN2,


No (And no impact
on the UE in idle

All the RF units on
the RRUCHAIN MO
must be removed
before you change
the value of BM in
the RRUCHAIN
MO.
When RT in the
RFU MO is set to
LRFU, TT in the
RRUCHAIN MO
corresponding to
RCN cannot be set
to LOADBALANCE.
TT in the
RRUCHAIN MO
where the RHUB
MO is located must
be set to CHAIN. After the command
In a RRUCHAIN takes effect, the
MO, when AT is set The cells carried by cells carried by the
to PEERPORT, TT the RRUs on the RRUs on the RRU
must be set to RRU chain/ring are chain/ring become
CHAIN. Read & Write Yes unavailable. available.
When TT in the
RRUCHAIN MO is
set to CHAIN, BM
must be set to After the command
COLD. When TT in takes effect, the
the RRUCHAIN MO The cells carried by cells carried by the
is set to RING, BM the RRUs on the RRUs on the RRU
can be set to COLD RRU chain/ring are chain/ring become
or HOT. Read & Write Yes unavailable. available.
configured on an
RRUCHAIN MO
when one of the
is met: 1. TYPE in
the BBP MO
specified by HCN,
HSRN, and HSN in
the RRUCHAIN MO
is not set to UBBP
and WM in this
BBP MO is not set
to HYBRID; 2. TT in
the RRUCHAIN MO
is set to RING, and
TYPE in the BBP
MO specified by
TCN, TSRN, and
TSN is not set to
UBBP and WM in
this BBP MO is not
set to HYBRID.
In an RRUCHAIN
MO, when TT is not
set to CHAIN and
HCN, HSRN, and
HSN are configured
on an RHUB MO or
TCN, TSRN, and
TSN are configured
on an RHUB MO,
TCN, TSRN, and After the command
TSN must be takes effect, the
configured on the The cells carried by cells carried by the
same RHUB MO as the RRUs on the RRUs on the RRU
the HCN, HSRN, RRU chain/ring are chain/ring become
and HSN. Read & Write Yes unavailable. available.
configured on an
RRUCHAIN MO
when one of the
is met: 1. TYPE in
the BBP MO
specified by HCN,
HSRN, and HSN in
the RRUCHAIN MO
is not set to UBBP
and WM in this
BBP MO is not set
to HYBRID; 2. TT in
the RRUCHAIN MO
is set to RING, and
TYPE in the BBP
MO specified by
TCN, TSRN, and
TSN is not set to
UBBP and WM in
this BBP MO is not
set to HYBRID.
In an RRUCHAIN
MO, when TT is not
set to CHAIN and
HCN, HSRN, and
HSN are configured
on an RHUB MO or
TCN, TSRN, and
TSN are configured
on an RHUB MO,
TCN, TSRN, and
TSN is not set to
UBBP and WM in
this BBP MO is not
set to HYBRID.
In the RRUCHAIN
MO, HSN must be
set to 2 or 3 if AT is
set to PEERPORT.
When AT in the
RRUCHAIN MO is
set to PEERPORT,
if HSN equal to 2,
the BBP with the
value of SN equal
to 3 must have
been configured; if
HSN equal to 3, the
BBP with the value
of SN equal to 2
must have been
configured.
In an RRUCHAIN
MO, when TT is not
set to CHAIN and
HCN, HSRN, and
HSN are configured
on an RHUB MO or
TCN, TSRN, and
TSN are configured
on an RHUB MO,
the CPRIPORT MO
specified by the
combination of
TCN, TSRN, TSN,
and TPN must be
available.
In the RRUCHAIN
MO, HPN can only
be set to 1, 3, or 5
when the following
condition is met:
WM in the BBP MO
corresponding to
HCN, HSRN, and
HSN in the
RRUCHAIN MO is
set to HYBRID. In
the RRUCHAIN
MO, TPN can only
when the following
conditions are met:
1. TT in the
RRUCHAIN MO is
set to RING; 2. WM
in the BBP MO
corresponding to
TCN, TSRN, and
TSN in the
RRUCHAIN MO is
set to HYBRID.
In a BBP MO, when After the command
the value of takes effect, the
CPRIEX is set to The cells carried by cells carried by the
ON, the value of the RRUs on the RRUs on the RRU
HPN must be RRU chain/ring are chain/ring become
smaller than 3. Read & Write Yes unavailable. available.
configured on an
RRUCHAIN MO
when one of the
is met: 1. TYPE in
the BBP MO
specified by HCN,
HSRN, and HSN in
the RRUCHAIN MO
is not set to UBBP
and WM in this
BBP MO is not set
to HYBRID; 2. TT in
the RRUCHAIN MO
is set to RING, and
TYPE in the BBP
MO specified by
TCN, TSRN, and
TSN is not set to
UBBP and WM in
this BBP MO is not
set to HYBRID.
In an RRUCHAIN
MO, when TT is not
set to CHAIN and
HCN, HSRN, and
HSN are configured
on an RHUB MO or
TCN, TSRN, and
TSN are configured
on an RHUB MO,
configured on an
RRUCHAIN MO
when one of the
is met: 1. TYPE in
the BBP MO
specified by HCN,
HSRN, and HSN in
the RRUCHAIN MO
is not set to UBBP
and WM in this
BBP MO is not set
to HYBRID; 2. TT in
the RRUCHAIN MO
is set to RING, and
TYPE in the BBP
MO specified by
TCN, TSRN, and
TSN is not set to
UBBP and WM in
this BBP MO is not
set to HYBRID.
In an RRUCHAIN
MO, when TT is not
set to CHAIN and
HCN, HSRN, and
HSN are configured
on an RHUB MO or
TCN, TSRN, and
TSN are configured
on an RHUB MO,
configured on an
RRUCHAIN MO
when one of the
is met: 1. TYPE in
the BBP MO
specified by HCN,
HSRN, and HSN in
the RRUCHAIN MO
is not set to UBBP
and WM in this
BBP MO is not set
to HYBRID; 2. TT in
the RRUCHAIN MO
is set to RING, and
TYPE in the BBP
MO specified by
TCN, TSRN, and
TSN is not set to
UBBP and WM in
this BBP MO is not
set to HYBRID.
In an RRUCHAIN
MO, when TT is not
set to CHAIN and
HCN, HSRN, and
HSN are configured
on an RHUB MO or
TCN, TSRN, and
TSN are configured
on an RHUB MO,
combination of
TCN, TSRN, TSN,
and TPN must be
available.
In the RRUCHAIN
MO, HPN can only
when the following
condition is met:
WM in the BBP MO
corresponding to
HCN, HSRN, and
HSN in the
RRUCHAIN MO is
set to HYBRID. In
the RRUCHAIN
MO, TPN can only
when the following
conditions are met:
1. TT in the
RRUCHAIN MO is
set to RING; 2. WM
in the BBP MO
corresponding to
TCN, TSRN, and
TSN in the
RRUCHAIN MO is
set to HYBRID.
If CPRIEX in the
BBP MO is set to
ON and TT in the After the command
RRUCHAIN MO is takes effect, the
not set to The cells carried by cells carried by the
CHAIN,the value of the RRUs on the RRUs on the RRU
TPN must be RRU chain/ring are chain/ring become
smaller than 3. Read & Write Yes unavailable. available.
BRKPOS1 is not
set to 255,
BRKPOS2 cannot
be set to 255.
In the RRUCHAIN
MO, when TT is not
set to CHAIN and
BRKPOS1 is set to
255, BRKPOS2
must be set to 255.
In the RRUCHAIN
MO, when TT is not
set to CHAIN,
BRKPOS1 must be
smaller than or
equal to
BRKPOS2.
In a RRUCHAIN
MO, when AT is set
to PEERPORT,
BRKPOS1 must be
set to
255,BRKPOS2
must be set to 255.
If BRKPOS1 or
BRKPOS2 in the The cells carried by
RRUCHAIN MO is the RRUs behind
not set to 255, the breakpoint on
BRKPOS1 or the RRU chain
BRKPOS2 must be become
smaller than or unavailable. The The cells carried by
equal to the total cells carried by the the RRUs on the
number of RRU, RRUs between RRU chain/ring
RFU, RHUB, and breakpoints 1 and 2 become available
AAMU MOs on the on the RRU ring after the
trunk of the RRU become breakpoints are
chain or ring. Read & Write Yes unavailable. removed.
BRKPOS1 is not
set to 255,
BRKPOS2 cannot
be set to 255.
In the RRUCHAIN
MO, when TT is not
set to CHAIN and
BRKPOS1 is set to
255, BRKPOS2
must be set to 255.
In the RRUCHAIN
MO, when TT is not
set to CHAIN,
BRKPOS1 must be
smaller than or
equal to
BRKPOS2.
In a RRUCHAIN
MO, when AT is set
to PEERPORT,
BRKPOS1 must be
set to
255,BRKPOS2
must be set to 255.
If BRKPOS1 or
BRKPOS2 in the
RRUCHAIN MO is
not set to 255,
BRKPOS1 or
BRKPOS2 must be
smaller than or The cells carried by
equal to the total The cells carried by the RRUs on the
number of RRU, the RRUs between RRU chain/ring
RFU, RHUB, and the breakpoints 1 become available
AAMU MOs on the and 2 on the RRU after the
trunk of the RRU ring are breakpoints are
chain or ring. Read & Write Yes unavailable. removed.
When AT in the
RRUCHAIN is set
to PEERPORT, the
RT in the RRU on
this RRUCHAIN
must be set to
MRRU or PRRU or
AIRU.
In the RRUCHAIN
MO, HSN must be
set to 2 or 3 if AT is
set to PEERPORT.
In a RRUCHAIN
MO, when AT is set
to PEERPORT, CR
must be set to
AUTO.
When AT in the
RRUCHAIN MO is
set to PEERPORT,
the board specified
by HCN, HSRN and
HSN must have not
been configured.
When AT in the
RRUCHAIN MO is
set to PEERPORT,
if HSN equal to 2,
the BBP with the
value of SN equal
to 3 must have
been configured; if
HSN equal to 3, the
BBP with the value
of SN equal to 2 No (And no impact
must have been on the UE in idle
configured. Read & Write mode) N/A N/A
Services are
restored
immediately after
the RRU finishes
Cells carried on the negotiating this rate
None Read & Write Yes RRU chain. with the BBU.

conditions: 1.when
CN is set to 0, SRN
must be set to 4~5
or 60~254; 2.when
CN is set to 1~62,
SRN must be set to
4~5; 3.when SRN is
set to 4~5 and
TYPE in the
CABINET is equal
to BTS3900AL, SN
must be set to 0~8;
4.when SRN is set
to 4~5 and TYPE in
the CABINET is not
equal to
BTS3900AL, SN
must be set to 0~5;
5.When the value of
SRN in a
RXBRANCH MO
ranges from 60 to
254 and RT in the
RRU MO is set to
MPRF, the value of
SN in the
RXBRANCH MO
ranges from 1 to 3;
6.When the value of
SRN in a
RXBRANCH MO
ranges from 60 to
254 and RT in the
RRU MO is not set
to MPRF, SN in the
RXBRANCH MO
conditions: 1.when
CN is set to 0, SRN
must be set to 4~5
or 60~254; 2.when
CN is set to 1~62,
SRN must be set to
4~5; 3.when SRN is
set to 4~5 and
TYPE in the
CABINET is equal
to BTS3900AL, SN
must be set to 0~8;
4.when SRN is set
to 4~5 and TYPE in
the CABINET is not
equal to
BTS3900AL, SN
must be set to 0~5;
5.When the value of
SRN in a
RXBRANCH MO
ranges from 60 to
254 and RT in the
RRU MO is set to
MPRF, the value of
SN in the
RXBRANCH MO
ranges from 1 to 3;
6.When the value of
SRN in a
RXBRANCH MO
ranges from 60 to
254 and RT in the
RRU MO is not set
to MPRF, SN in the
RXBRANCH MO
conditions: 1.when
CN is set to 0, SRN
must be set to 4~5
or 60~254; 2.when
CN is set to 1~62,
SRN must be set to
4~5; 3.when SRN is
set to 4~5 and
TYPE in the
CABINET is equal
to BTS3900AL, SN
must be set to 0~8;
4.when SRN is set
to 4~5 and TYPE in
the CABINET is not
equal to
BTS3900AL, SN
must be set to 0~5;
5.When the value of
SRN in a
RXBRANCH MO
ranges from 60 to
254 and RT in the
RRU MO is set to
MPRF, the value of
SN in the
RXBRANCH MO
ranges from 1 to 3;
6.When the value of
SRN in a
RXBRANCH MO
ranges from 60 to
254 and RT in the
RRU MO is not set
to MPRF, SN in the
RXBRANCH MO
Services are
Services carried on interrupted until the
the specified RX parameter is
None Read & Write Yes channel correctly set.
When the TMA MO
is not used, ATTEN
in the RXBRANCH
MO is set to 0.
When the 12dB
TMA MO is used,
the value of ATTEN
ranges from 4 dB to
11 dB. When the
24dB TMA MO is
used, the value of No (And no impact
ATTEN ranges from on the UE in idle
11 dB to 22 dB. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle


conditions: 1.when
CN is set to 0, SRN
must be set to 4~5
or 60~254; 2.when
CN is set to 1~62,
SRN must be set to
4~5; 3.when SRN is
set to 4~5 and
TYPE in the
CABINET is equal
to BTS3900AL, SN
must be set to 0~8;
4.when SRN is set
to 4~5 and TYPE in
the CABINET is not
equal to
BTS3900AL, SN
must be set to 0~5;
5.When the value of
SRN in a
TXBRANCH MO
ranges from 60 to
254 and RT in the
RRU MO is set to
MPRF, the value of
SN in the
TXBRANCH MO
ranges from 1 to 3;
6.When the value of
SRN in a
TXBRANCH MO
ranges from 60 to
254 and RT in the
RRU MO is not set
to MPRF, SN in the
TXBRANCH MO
conditions: 1.when
CN is set to 0, SRN
must be set to 4~5
or 60~254; 2.when
CN is set to 1~62,
SRN must be set to
4~5; 3.when SRN is
set to 4~5 and
TYPE in the
CABINET is equal
to BTS3900AL, SN
must be set to 0~8;
4.when SRN is set
to 4~5 and TYPE in
the CABINET is not
equal to
BTS3900AL, SN
must be set to 0~5;
5.When the value of
SRN in a
TXBRANCH MO
ranges from 60 to
254 and RT in the
RRU MO is set to
MPRF, the value of
SN in the
TXBRANCH MO
ranges from 1 to 3;
6.When the value of
SRN in a
TXBRANCH MO
ranges from 60 to
254 and RT in the
RRU MO is not set
to MPRF, SN in the
TXBRANCH MO
conditions: 1.when
CN is set to 0, SRN
must be set to 4~5
or 60~254; 2.when
CN is set to 1~62,
SRN must be set to
4~5; 3.when SRN is
set to 4~5 and
TYPE in the
CABINET is equal
to BTS3900AL, SN
must be set to 0~8;
4.when SRN is set
to 4~5 and TYPE in
the CABINET is not
equal to
BTS3900AL, SN
must be set to 0~5;
5.When the value of
SRN in a
TXBRANCH MO
ranges from 60 to
254 and RT in the
RRU MO is set to
MPRF, the value of
SN in the
TXBRANCH MO
ranges from 1 to 3;
6.When the value of
SRN in a
TXBRANCH MO
ranges from 60 to
254 and RT in the
RRU MO is not set
to MPRF, SN in the
TXBRANCH MO

Services carried on
the specified TX Less than 2
None Read & Write Yes channel minutes




This parameter is
valid only when
MODE in the
NTPCP MO is
IPV4. Read Only N/A N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

This parameter is
valid only when
MODE in the
NTPCP MO is
IPV6. Read Only N/A N/A N/A
No (And no impact
on the UE in idle
This parameter is
valid only when
AUTHMODE is set No (And no impact
to a value other on the UE in idle
than PLAIN. Read & Write mode) N/A N/A
This parameter is
valid only when
AUTHMODE is set No (And no impact
to a value other on the UE in idle
than PLAIN. Read & Write mode) N/A N/A

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
This parameter is
DST in the TZ MO on the UE in idle
is set to YES. Read & Write mode) N/A N/A
When DST in the

TZ MO is set to
YES, SMONTH and
EMONTH are not
allowed to be
identical.
This parameter is
valid only when
DST in the TZ MO
is set to YES and No (And no impact
SM is DATEWEEK, on the UE in idle
DATE, or WEEK. Read & Write mode) N/A N/A
When DST in the
TZ MO is set to
YES and SM is
DATEWEEK, SDAY
plus 6 should not
be beyond the end
of the month
specified by
SMONTH.
When DST in the
TZ MO is set to
YES and SM is
DATE, if SMONTH
is FEB, then SDAY
should not be
greater than 28.
This parameter is
valid only when
DST in the TZ MO
is set to YES and
SM is DATEWEEK
or DATE.
When DST in the
TZ MO is set to
YES and SM is
DATE, SDAY
should not be No (And no impact
greater than normal on the UE in idle
day. Read & Write mode) N/A N/A
This parameter is
valid only when
DST in the TZ MO No (And no impact
is set to YES and on the UE in idle
SM is WEEK. Read & Write mode) N/A N/A
This parameter is
valid only when
DST in the TZ MO
SM is DATEWEEK on the UE in idle
or WEEK. Read & Write mode) N/A N/A
This parameter is
This parameter is
This parameter is
valid only when
DST in the TZ MO
is set to YES and
EM is DATEWEEK,
DATE, or WEEK.
When DST in the
TZ MO is set to
YES, SMONTH and
EMONTH are not No (And no impact
allowed to be on the UE in idle
identical. Read & Write mode) N/A N/A
When DST in the
TZ MO is set to
YES and EM is
DATEWEEK, EDAY
plus 6 should not
be beyond the end
of the month
specified by
EMONTH.
This parameter is
valid only when
DST in the TZ MO
is set to YES and
EM is DATEWEEK
or DATE.
When DST in the
TZ MO is set to
YES and EM is
DATE, if EMONTH
is FEB, then EDAY
should not be
greater than 28.
When DST in the
TZ MO is set to
YES and EM is
DATE, EDAY
should not be No (And no impact
greater than normal on the UE in idle
day. Read & Write mode) N/A N/A
This parameter is
valid only when
DST in the TZ MO No (And no impact
is set to YES and on the UE in idle
EM is WEEK. Read & Write mode) N/A N/A
This parameter is
valid only when
DST in the TZ MO
EM is DATEWEEK on the UE in idle
or WEEK. Read & Write mode) N/A N/A
This parameter is
This parameter is
This parameter is
valid only when
ZONET in the TZ No (And no impact
MO is set to on the UE in idle
CUSTOM. Read & Write mode) N/A N/A

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
This parameter is
invalid when No (And no impact
ENCRYMODE is on the UE in idle
set to Plaintext. Read & Write mode) N/A N/A
This parameter is
ENCRYMODE is on the UE in idle
set to Plaintext. Read & Write mode) N/A N/A
SERVERIP cannot
be set to 255.x.x.x. Read Only N/A N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In the
CnOperatorHoCfg
MO, SecondRatPri
must be set to
NULL if FirstRatPri
is set to EUTRAN.
In the
CnOperatorHoCfg
MO, SecondRatPri
must be set to
EUTRAN_TDD if
EUTRAN_FDD.
In the
CnOperatorHoCfg
MO, SecondRatPri
must be set to
EUTRAN_FDD if No (And no impact
FirstRatPri is set to on the UE in idle
EUTRAN_TDD. Read & Write mode) N/A N/A
In the
CnOperatorHoCfg
MO, SecondRatPri
must be set to
NULL if FirstRatPri
is set to EUTRAN.
In the
CnOperatorHoCfg
MO, SecondRatPri
must be set to
EUTRAN_TDD if
EUTRAN_FDD.
In the
CnOperatorHoCfg
MO, SecondRatPri
must be set to
EUTRAN_FDD if No (And no impact
FirstRatPri is set to on the UE in idle
EUTRAN_TDD. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
CnOperatorId in the
CnOperatorSpidCfg
MO must have
been set in the
associated
CnOperator MO. Read Only N/A N/A N/A
No (And no impact
on the UE in idle
RatFreqPriorityGrou
pId in the
CnOperatorSpidCfg
MO must have
been set in the
associated No (And no impact
RatFreqPriorityGrou on the UE in idle
p MO. Read & Write mode) N/A N/A

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

In the
CSFallBackBlindH
oCfg MO,
InterRatHighestPri
must be different
from
InterRatLowestPri.
In the
CSFallBackBlindH
oCfg MO,
InterRatHighestPri
must be different
InterRatSecondPri on the UE in idle
In the
CSFallBackBlindH
oCfg MO,
InterRatHighestPri
must be different
from
InterRatSecondPri
.
In the
CSFallBackBlindH
oCfg MO,
InterRatLowestPri
must be set to
NULL if No (And no impact
is set to NULL. Read & Write mode) N/A N/A
In the
CSFallBackBlindH
oCfg MO,
InterRatHighestPri
must be different
from
InterRatLowestPri.
In the
CSFallBackBlindH
oCfg MO,
InterRatLowestPri
must be set to
NULL if
InterRatSecondPri
is set to NULL.
In the
CSFallBackBlindH
oCfg MO,
InterRatSecondPri
must be different
from
InterRatLowestPri
if No (And no impact
is not set to NULL. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In the
CSFallBackBlindH
oCfg MO,
IdleCsfbHighestPri
must be different
from
IdleCsfbLowestPri
.
In the
CSFallBackBlindH
oCfg MO,
IdleCsfbHighestPri
must be different
IdleCsfbSecondPri on the UE in idle
In the
CSFallBackBlindH
oCfg MO,
IdleCsfbHighestPri
must be different
from
IdleCsfbSecondPri
.
In the
CSFallBackBlindH
oCfg MO,
IdleCsfbLowestPri
must be set to
NULL if
IdleCsfbSecondPri
is set to NULL.
In the
CSFallBackBlindH
oCfg MO,
IdleCsfbSecondPri
must be different
from
IdleCsfbLowestPri
In the
CSFallBackBlindH
oCfg MO,
IdleCsfbHighestPri
must be different
from
IdleCsfbLowestPri
.
In the
CSFallBackBlindH
oCfg MO,
IdleCsfbLowestPri
must be set to
NULL if
IdleCsfbSecondPri
is set to NULL.
In the
CSFallBackBlindH
oCfg MO,
IdleCsfbSecondPri
must be different
from
IdleCsfbLowestPri
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle


In the same
RAT/frequency
priority group
specified by
RatFreqPriorityGr
oupId, frequencies
used for different
RATs must be No (And no impact
assigned different on the UE in idle
priorities. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
(%).
Due to the
limitations defined
in the S1 interface
protocol (For
details, see 3GPP
TS 36.413), the
value of
eNodeBFunctionNa
me can contain only
the following valid
characters: upper-
case letters (A to Z),
lower-case letters
(a to z), digits (0 to
9), single blank ( ),
apostrophe ('), left
brackets ((), right
brackets ()), one or
two plus sign (+),
hyphens (-), full
stops (.), and
American Standard
Code for
Information
Interchange (ASCII)
codes. All invalid
characters
contained in the
eNodeB name are
replaced with
hyphens (-) when
an eNodeB sends
messages to the
NEs in the EPC No (And no impact
through S1 on the UE in idle
interfaces. Read & Write mode) N/A N/A
Less than 3
None Read & Write Yes eNodeB minutes
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In the
ENodeBCipherCap
MO, the
PrimaryCipherAlg
o,
SecondCipherAlg
o,
ThirdCipherAlgo,a
nd
FourthCipherAlgo
parameters must be No (And no impact
set to different on the UE in idle
values. Read & Write mode) N/A N/A
In the
ENodeBCipherCap
MO, the
PrimaryCipherAlg
o,
SecondCipherAlg
o,
ThirdCipherAlgo,a
nd
FourthCipherAlgo
In the
ENodeBCipherCap
MO, the
PrimaryCipherAlg
o,
SecondCipherAlg
o,
ThirdCipherAlgo,a
nd
FourthCipherAlgo
In the
ENodeBCipherCap
MO, the
PrimaryCipherAlg
o,
SecondCipherAlg
o,
ThirdCipherAlgo,a
nd
FourthCipherAlgo
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In the
ENodeBIntegrityC
ap MO, the
PrimaryIntegrityAl
go,
SecondIntegrityAl
go, and
ThirdIntegrityAlgo
In the
ENodeBIntegrityC
ap MO, the
PrimaryIntegrityAl
go,
SecondIntegrityAl
go, and
ThirdIntegrityAlgo
In the
ENodeBIntegrityC
ap MO, the
PrimaryIntegrityAl
go,
SecondIntegrityAl
go, and
ThirdIntegrityAlgo
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
This parameter is
valid only when
DynDrxSwitch is No (And no impact
turned off in the on the UE in idle
CellAlgoSwitch MO. Read & Write mode) N/A N/A
This parameter is
valid only when
turned off in the on the UE in idle
No (And no impact
on the UE in idle
This parameter is
valid only when
turned on in the on the UE in idle
This parameter is
valid only when
turned on in the on the UE in idle
No (And no impact
on the UE in idle
When the IPMODE
parameter is set to
IPV4(IPv4), the
TceIpV4Addr
parameter must be
set. When the
IPMODE parameter
is set to IPV6(IPv6),
the TceIpV4Addr No (And no impact
parameter does not on the UE in idle
need to be set. Read & Write mode) N/A N/A
When the IPMODE

parameter is set to
IPV6(IPv6), the
TceIpV6Addr
parameter must be
set. When the
IPMODE parameter
is set to IPV4(IPv4),
the TceIpV6Addr No (And no impact
Mcc in each
X2AutoSetupOper
ator MO consists of
digits only. Read Only N/A N/A N/A
Mnc in each
X2AutoSetupOper
ator MO consists of

In the CaMgtCfg
MO, the value of
CarrAggrA4ThdRs
rp must be greater
than the value of No (And no impact
CarrAggrA2ThdRs on the UE in idle
rp Read & Write mode) N/A N/A
In the CaMgtCfg
MO, the value of
CarrAggrA4ThdRs
rp must be greater
CarrAggrA2ThdRs on the UE in idle
rp Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
In a CaMgtCfg MO,
the value of
ActiveBufferLenTh
d must be greater
DeactiveBufferLen on the UE in idle
Thd. Read & Write mode) N/A N/A
In a CaMgtCfg MO,
the value of
ActiveBufferLenTh
d must be greater
DeactiveBufferLen on the UE in idle
Thd. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
The parameter is
valid only when
DlCompSwitch in
the CellAlgoSwitch
MO is set to No (And no impact
DlCompSwitch(DlC on the UE in idle
ompSwitch). Read & Write mode) N/A N/A

No (And no impact
on the UE in idle
This parameter
must be set for
using a fixed
PDSCH power if
PdschSpsPcSwitch
under the
DlPcAlgoSwitch
parameter is turned
off and the
DlIcicSwitch
parameter is set to No (And no impact
DlIcicSwitch_OFF_ on the UE in idle
ENUM. Read & Write mode) N/A N/A

In a CellDrxPara
MO, the value of
FddEnterDrxThd
must not be greater No (And no impact
FddExitDrxThd. Read & Write mode) N/A N/A
In a CellDrxPara
MO, the value of
FddEnterDrxThd
FddExitDrxThd. Read & Write mode) N/A N/A
In a CellDrxPara
MO, the value of
TddEnterDrxThdUl
must be less than No (And no impact
the value of on the UE in idle
TddExitDrxThdUl. Read & Write mode) N/A N/A
In a CellDrxPara
MO, the value of
TddEnterDrxThdUl
TddExitDrxThdUl. Read & Write mode) N/A N/A
In a CellDrxPara
MO, the value of
TddEnterDrxThdDl
TddExitDrxThdDl. Read & Write mode) N/A N/A
In a CellDrxPara
MO, the value of
TddEnterDrxThdDl
TddExitDrxThdDl. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In a CellDrxPara
MO, the value of
TddPowerSavingE
nterDrxThd must
be less than the
value of No (And no impact
TddPowerSavingE on the UE in idle
xitDrxThd. Read & Write mode) N/A N/A
In a CellDrxPara
MO, the value of
TddPowerSavingE
nterDrxThd must
be less than the
TddPowerSavingE on the UE in idle
xitDrxThd. Read & Write mode) N/A N/A
In a CellDrxPara
MO, the value of
OndurationTimerU
nsync must be
smaller than the
LongDrxCycleUns on the UE in idle
ync. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
In a CellDrxPara
MO, the value of
OndurationTimerU
nsync must be
smaller than the
LongDrxCycleUns on the UE in idle
ync. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

The parameter is
valid only when
UlCompSwitch in
the CellAlgoSwitch No (And no impact
MO is set to on the UE in idle
ENABLE(Enable). Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
10(metric system); on the UE in idle
33(imperial system) Read & Write mode) N/A N/A

No (And no impact
on the UE in idle
In a DrxParaGroup
MO, the value of
OnDurationTimer
must not be greater
than the value of
LongDrxCycle. If
SupportShortDrx
is set to
UU_ENABLE, the
value of
OnDurationTimer
must not be greater
than the value of
ShortDrxCycle.
This parameter is
EnterDrxSwitch is on the UE in idle
set to OFF. Read & Write mode) N/A N/A
This parameter is
This parameter is
This parameter is
invalid when
EnterDrxSwitch is
set to OFF.
In a DrxParaGroup
MO, the value of
OnDurationTimer
LongDrxCycle. Read & Write mode) N/A N/A
This parameter is
If SupportShortDrx
is set to
UU_ENABLE, the
value of
LongDrxCycle
must be an integer
multiple of
ShortDrxCycle.
This parameter is
invalid when
EnterDrxSwitch is
set to OFF.
In a DrxParaGroup
MO, the value of
OnDurationTimer
must not be greater
than the value of
ShortDrxCycle if
SupportShortDrx No (And no impact
is set to on the UE in idle
UU_ENABLE. Read & Write mode) N/A N/A
This parameter is
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In an
InterRatHoComm
Group MO, the
value of
InterRatHoA1ThdR
srp must be greater
InterRatHoA2ThdR on the UE in idle
srp. Read & Write mode) N/A N/A
In an
InterRatHoComm
Group MO, the
value of
InterRatHoA1ThdR
srq must be greater
srq. Read & Write mode) N/A N/A
In an
InterRatHoComm
Group MO, the
value of
InterRatHoA1ThdR
srp must be greater
srp. Read & Write mode) N/A N/A
In an
InterRatHoComm
Group MO, the
value of
InterRatHoA1ThdR
srq must be greater
srq. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
If coverage-based
handover is
enabled and the
threshold specified
higher than the
associated
threshold for
coverage-based
inter-RAT handover,
coverage-based
handover takes
precedence over
both load- and
service-based
handovers. In this
case, load- and
service-based No (And no impact
handovers will not on the UE in idle
occur. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
This parameter is
RlfTimerConstCfgIn on the UE in idle
d is set to CFG. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
This parameter is
valid only when the
SriAdaptiveSwitch
parameter in the No (And no impact
GlobalProcSwitch on the UE in idle
MO is set to OFF. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
This parameter is
RlfTimerConstCfgIn on the UE in idle
d is set to CFG. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
If coverage-based
handover is
enabled and the
threshold specified
higher than the
associated
threshold for
coverage-based
inter-RAT handover,
coverage-based
handover takes
precedence over
both load- and
service-based
handovers. In this
case, load- and
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
If the threshold
specified through
this parameter is
higher than the
associated
threshold for the
coverage-based
inter-RAT handover
and the coverage-
based handover is
enabled, the
coverage-based
handover takes
precedence over
both the load- and
service-based
handovers. In this
case, the load- and
handovers would on the UE in idle
not occur. Read & Write mode) N/A N/A

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
If coverage-based
handover is
enabled and the
threshold specified
higher than the
associated
threshold for
coverage-based
inter-RAT handover,
coverage-based
handover takes
precedence over
both load- and
service-based
handovers. In this
case, load- and
If coverage-based
handover is
enabled and the
threshold specified
higher than the
associated
threshold for
coverage-based
inter-RAT handover,
coverage-based
handover takes
precedence over
both load- and
service-based
handovers. In this
case, load- and

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In an
InterFreqHoGroup
MO, the value of
InterFreqHoA1Thd
Rsrp must be
greater than or
equal to the value
of No (And no impact
InterFreqHoA2Thd on the UE in idle
Rsrp. Read & Write mode) N/A N/A
In an
InterFreqHoGroup
MO, the value of
InterFreqHoA1Thd
Rsrq must be
greater than or
equal to the value
Rsrq. Read & Write mode) N/A N/A
1. The value of
InterFreqHoA2Thd
Rsrp must be
smaller than that of
InterFreqHoA1Thd
Rsrp.
2. In an
InterFreqHoGroup
MO, the value of
InterFreqHoA1Thd
Rsrp must be larger
Rsrp. Read & Write mode) N/A N/A
1. The value of
InterFreqHoA2Thd
Rsrq must be
smaller than that of
InterFreqHoA1Thd
Rsrq.
2. In an
InterFreqHoGroup
MO, the value of
InterFreqHoA1Thd
Rsrq must be larger
Rsrq. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In an
InterFreqHoGroup
MO, the value of
A3InterFreqHoA1T
hdRsrp must be
greater than or
equal to the value
A3InterFreqHoA2T on the UE in idle
hdRsrp. Read & Write mode) N/A N/A
In an
InterFreqHoGroup
MO, the value of
A3InterFreqHoA1T
hdRsrp must be
greater than or
equal to the value
A3InterFreqHoA2T on the UE in idle
hdRsrp. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
The value of
CnOperatorName
in each No (And no impact
CnOperator MO on the UE in idle
must be unique. Read & Write mode) N/A N/A
CnOperatorType
can be set to
CNOPERATOR_PR
IMARY in only one Less than 3
CnOperator MO. Read & Write Yes eNodeB minutes
Mcc in each
CnOperator MO
consists of digits
only.
The combination of
Mcc and Mnc in
each CnOperator
MO must be Less than 3
unique. Read & Write Yes eNodeB minutes
Mnc in each
CnOperator MO
consists of digits Less than 3
only. Read & Write Yes eNodeB minutes
No (And no impact
on the UE in idle
The combination of
CnOperatorId and
Tac in each
CnOperatorTa MO Less than 0.1
must be unique. Read & Write Yes Cell minute
The combination of
CnOperatorId and
Tac in each
CnOperatorTa MO Less than 0.1
No (And no impact
on the UE in idle
This parameter is
valid when No (And no impact
EmcEnable is set to on the UE in idle
ON. Read & Write mode) N/A N/A
This parameter is
This parameter is
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
Less than 3
None Read & Write Yes eNodeB minutes
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
The sum of
MaxUserNumRate
in all
LicenseSharingPo
licy MOs cannot
exceed 100.
In the
LicenseSharingPo
licy MO, the value
of
UserNumSharingR
ate must be less
than or equal to that No (And no impact
of on the UE in idle
MaxUserNumRate Read & Write mode) N/A N/A
In the
LicenseSharingPo
licy MO, the value
of
UserNumSharingR
ate must be less
than or equal to that No (And no impact
of on the UE in idle
MaxUserNumRate Read & Write mode) N/A N/A
In the
S1ReestTimer MO,
the value of
S1ReestMinTimer
or equal to that of on the UE in idle
S1ReestMaxTimer. Read & Write mode) N/A N/A
In the
S1ReestTimer MO,
the value of
S1ReestMinTimer
or equal to that of on the UE in idle
S1ReestMaxTimer. Read & Write mode) N/A N/A

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
None Read & Write Yes eNodeB Less than 1 minute
When the AppType

parameter is set to
S1(S1), the
S1InterfaceId
parameter must be
set. When the
AppType parameter
is set to X2(X2), the
S1InterfaceId
parameter does not
need to be set. Read & Write Yes eNodeB Less than 1 minute
When the AppType
parameter is set to
X2(X2), the
X2InterfaceId
parameter must be
set. When the
AppType parameter
is set to S1(S1), the
X2InterfaceId
parameter does not
need to be set. Read & Write Yes eNodeB Less than 1 minute
Less than 0.1

None Read & Write Yes Cell minute
The CpEpGroupId
value in each S1
MO must be Less than 0.1
unique. Read & Write Yes Cell minute
Less than 0.1

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
Less than 0.1

No (And no impact
on the UE in idle

Less than 0.1
None Read Only Yes Cell minute
The S1CpBearerId
value in each
S1Interface MO Less than 0.1
Less than 0.1

No (And no impact
on the UE in idle
No (After an S1
interface is blocked,
UEs in idle mode
cannot access the
None Read & Write network.) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle




No (And no impact
on the UE in idle
Less than 0.1

None Read & Write Yes eNodeB minute
The CpEpGroupId
value in each X2
MO must be Less than 0.1
unique. Read & Write Yes eNodeB minute
Less than 0.1
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
Less than 0.1

Less than 0.1

None Read Only Yes eNodeB minute
Mcc in an
X2BlackWhiteList
MO consists of
Mnc in an
X2BlackWhiteList
MO consists of
No (And no impact
on the UE in idle

The X2CpBearerId
value in each
X2Interface MO Less than 0.1
must be unique. Read & Write Yes eNodeB minute
Less than 0.1

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle


No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In the Drx MO, the
value of
OnDurationTimerS
pecial cannot be
greater than that of No (And no impact
LongDrxCycleSpe on the UE in idle
cial. Read & Write mode) N/A N/A
In the Drx MO, the
value of
OnDurationTimerS
pecial must not be
greater than the
value of
LongDrxCycleSpe
cial. If
SupportShortDrxS
pecial is set to
UU_ENABLE, the
value of
OnDurationTimerS
pecial must not be
greater than the
ShortDrxCycleSpe on the UE in idle
cial. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
If
SupportShortDrxS
pecial is set to
UU_ENABLE, the
value of
LongDrxCycleSpe
cial must be an
integer multiple of
ShortDrxCycleSpe
cial.
In the Drx MO, the
value of
OnDurationTimerS
pecial must not be
greater than the
value of
ShortDrxCycleSpe
cial if
SupportShortDrxS No (And no impact
pecial is set to on the UE in idle
UU_ENABLE. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
This parameter is
valid when RlcMode No (And no impact
RlcMode_AM. Read & Write mode) N/A N/A
This parameter is
This parameter is
This parameter is
This parameter is
This parameter is
This parameter is
This parameter is
This parameter is
This parameter is
This parameter is
This parameter is
This parameter is
RlcMode_UM. Read & Write mode) N/A N/A
This parameter is
This parameter is
This parameter is
This parameter is
This parameter is
This parameter is No (And no impact

valid only for QCIs on the UE in idle


No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
This parameter is
valid only for QCIs No (And no impact
2 to 4 and QCIs 6 on the UE in idle
to 9. Read & Write mode) N/A N/A


No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
This parameter is
valid only when
BfSwitch is selected
under the
BfAlgoSwitch No (And no impact
parameter in the on the UE in idle
This parameter is
BfMimoAdaptiveSwi on the UE in idle
tch is turned off. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
This parameter is
CqiPeriodAdaptive on the UE in idle
is set to OFF. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
This parameter is
valid only when
BfSwitch is turned
off under the
BfAlgoSwitch No (And no impact
parameter in the on the UE in idle
This parameter is
MimoAdaptiveSwitc on the UE in idle
h is turned off. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
This parameter is
valid only when the
SrsPeriodAdaptive No (And no impact
OFF(Off). Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
If SMeasureInd is
set to CFG,
SMeasure must be
set.
If SMeasureInd is
set to NOT_CFG, No (And no impact
SMeasure does not on the UE in idle
No (And no impact
on the UE in idle
If
SpeedDepParaInd
is set to CFG,
TcrMaxConnMode
must be set.
If
SpeedDepParaInd
is set to NOT_CFG,
TcrMaxConnMode No (And no impact
does not need to be on the UE in idle
set. Read & Write mode) N/A N/A
If
SpeedDepParaInd
is set to CFG,
TcrMaxHystConnM
ode must be set.
If
SpeedDepParaInd
is set to NOT_CFG,
TcrMaxHystConnM No (And no impact
ode does not need on the UE in idle
to be set. Read & Write mode) N/A N/A
In the
HoMeasComm
MO, if
SpeedDepParaInd
is set to CFG,
NcrHighConnMod
e must be greater
than
NcrMediumConnM
ode.
If
SpeedDepParaInd
is set to CFG,
NcrMediumConnM
ode must be set.
If
SpeedDepParaInd
is set to NOT_CFG,
NcrMediumConnM No (And no impact
ode does not need on the UE in idle
In the
HoMeasComm
MO, if
SpeedDepParaInd
is set to CFG,
NcrHighConnMod
e must be greater
than
NcrMediumConnM
ode.
If
SpeedDepParaInd
is set to CFG,
NcrHighConnMod
e must be set.
If
SpeedDepParaInd
is set to NOT_CFG,
NcrHighConnMod No (And no impact
e does not need to on the UE in idle
be set. Read & Write mode) N/A N/A
If
SpeedDepParaInd
is set to CFG,
TttSfMedium must
be set.
If
SpeedDepParaInd
is set to NOT_CFG, No (And no impact
TttSfMedium does on the UE in idle
not need to be set. Read & Write mode) N/A N/A
If
SpeedDepParaInd
is set to CFG,
TttSfHigh must be
set.
If
SpeedDepParaInd
TttSfHigh does not on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In a
InterRatHoComm
MO, if
Cdma20001XrttMe
asMode is set to
PERIOD,
Cdma20001XrttFre
qSelMode must be
set to No (And no impact
BY_SELECT_RATI on the UE in idle
O. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
In a
InterRatHoComm
MO, if
Cdma20001XrttMe
asMode is set to
PERIOD,
Cdma20001XrttFre
qSelMode must be
set to No (And no impact
BY_SELECT_RATI on the UE in idle
O. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
mode. This
parameter is used
with other
parameters related
to cell access
barring to control
None Read & Write the UE accesses.) N/A N/A
No (For the UE in
idle mode, if it is
BOOLEAN_TRUE,
AcBarringForEmerg the emergency calls
ency is optional, initiated by the UEs
depending on the of access
setting of categories 0 to 9 or
AcBarringInfoCfgIn UEs without IMSI
d. Read & Write are rejected.) N/A N/A
No (The access
request of the
mobile-originated
call initiated by a
AcBarringForMoDat UE in idle mode is
aCfgInd is optional, accepted or
depending on the rejected according
setting of to the
AcBarringInfoCfgIn corresponding
d. Read & Write barring status.) N/A N/A
No (For the UE in
idle mode, the
source call
accesses are
AcBarringFactorFor allowed only when
Call is optional, the random number
depending on the generated by the
setting of UE is smaller than
AcBarringForMoDat the access
aCfgInd. Read & Write probability factor.) N/A N/A
AcBarTimeForCall
is optional,
depending on the
setting of No (And no impact
AcBarringForMoDat on the UE in idle
aCfgInd. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
mode. If this
AC11BarforCall is parameter is set to
optional, depending BOOLEAN_TRUE,
on the setting of UEs of access class
AcBarringForMoDat 11 are not allowed
aCfgInd. Read & Write to initiate calls.) N/A N/A
No (And no impact
on the UE in idle
mode. If this
parameter is set to
BOOLEAN_TRUE,
AC12BarforCall is the mobile-
optional, depending originated calls
on the setting of initiated by UEs of
AcBarringForMoDat access class 12 are
aCfgInd. Read & Write not allowed.) N/A N/A
No (And no impact
on the UE in idle
mode. If this
parameter is set to
BOOLEAN_TRUE,
No (And no impact
on the UE in idle
mode. If this
parameter is set to
BOOLEAN_TRUE,
No (And no impact
on the UE in idle
mode. If this
parameter is set to
BOOLEAN_TRUE,
No (The access
request of the
signaling initiated
AcBarringForMoSig by a UE in idle
CfgInd is optional, mode is accepted
depending on the or rejected
setting of according to the
d. Read & Write barring status.) N/A N/A
No (The signaling
initiated by a UE in
idle mode is
AcBarringFactorFor granted access only
Sig is optional, when the random
depending on the number generated
setting of by the UE is smaller
AcBarringForMoSig than the access
CfgInd. Read & Write probability factor.) N/A N/A
AcBarTimeForSig is
optional, depending
on the setting of No (And no impact
AcBarringForMoSig on the UE in idle
CfgInd. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
mode. If this
parameter is set to
AC11BarForSig is BOOLEAN_TRUE,
optional, depending the signaling
on the setting of access initiated by
AcBarringForMoSig UEs of access class
CfgInd. Read & Write 11 are not allowed.) N/A N/A
No (And no impact
on the UE in idle
mode. If this
parameter is set to
No (And no impact
on the UE in idle
mode. If this
parameter is set to
No (And no impact
on the UE in idle
mode. If this
parameter is set to
No (And no impact
on the UE in idle
mode. If this
parameter is set to
No (The access
request of MMTEL
The voice services
AcBarForMVoiceCf initiated by a UE in
gInd parameter is idle mode is
optional, depending accepted or barred
on the based on the
d parameter setting. Read & Write barring indicator.) N/A N/A
In the CellAcBar
MO, if any of
AC11BARSTATE,
AC12BARSTATE,
AC13BARSTATE,
AC14BARSTATE, No (If the random
and number generated
AC15BARSTATE by the UE in idle
under mode is less than
SpecialACBarFor this access
MVoice is selected, probability factor,
AcBarFactorForM the MMTEL voice
Voice must be set service is granted
to P00. Read & Write access.) N/A N/A
The
AcBarTimeForMVoi
ce parameter is
optional, depending
on the
AcBarForMVoiceCf No (And no impact
gInd parameter on the UE in idle
setting. Read & Write mode) N/A N/A
In the CellAcBar
MO, if any of
AC11BARSTATE,
AC12BARSTATE,
AC13BARSTATE,
AC14BARSTATE,
and
AC15BARSTATE
under
SpecialACBarFor
MVoice is selected,
AcBarFactorForM No (And no impact
Voice must be set on the UE in idle
to P00. Read & Write mode) N/A N/A
No (The access
request of MMTEL
The video services
AcBarForMVideoCf initiated by a UE in
gInd parameter is idle mode is
optional, depending accepted or barred
on the based on the
d parameter setting. Read & Write barring indicator.) N/A N/A
In the CellAcBar
MO, if any of
AC11BARSTATE,
AC12BARSTATE,
AC13BARSTATE,
AC14BARSTATE, No (If the random
and number generated
AC15BARSTATE by the UE in idle
under mode is less than
SpecialACBarFor this access
MVideo is selected, probability factor,
AcBarFactorForM the MMTEL video
Video must be set service is granted
to P00. Read & Write access.) N/A N/A
The
AcBarTimeForMVid
eo parameter is
optional, depending
on the
AcBarForMVideoCf No (And no impact
gInd parameter on the UE in idle
setting. Read & Write mode) N/A N/A
In the CellAcBar
MO, if any of
AC11BARSTATE,
AC12BARSTATE,
AC13BARSTATE,
AC14BARSTATE,
and
AC15BARSTATE
under
SpecialACBarFor
MVideo is selected,
AcBarFactorForM No (And no impact
Video must be set on the UE in idle
to P00. Read & Write mode) N/A N/A
No (Modifications
on this parameter
will affect the cell on
which the UE in idle
None Read & Write mode camps.) N/A N/A
No (And no impact
on the UE in idle
No (Modifications
on this parameter
will affect the cell on
which the UE in idle
None Read & Write mode camps.) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In the CellAccess
MO, the year,
month, day, and
hour in
RoundActionTime
can be set to non-
zero values, and
others (such as the
minute and second) No (And no impact
in this parameter on the UE in idle
must be set to 0. Read & Write mode) N/A N/A

No (And no impact
on the UE in idle
The sum of
OpUlRbUsedRatio
in all CellOp MOs No (And no impact
of the same cell on the UE in idle
cannot exceed 100. Read & Write mode) N/A N/A
The sum of
OpDlRbUsedRatio
in all CellOp MOs No (And no impact
of the same cell on the UE in idle
cannot exceed 100. Read & Write mode) N/A N/A
When
MMECfgNum is
greater than 1,
among all MMEs
configured in a
CellOp MO, the
MME group identity
(MMEGI) and MME
code (MMEC) of
each two MMEs
cannot be the same
simultaneously. Read & Write Yes Cell 0.1
When
MMECfgNum is
greater than 1,
among all MMEs
configured in a
CellOp MO, the
MME group identity
(MMEGI) and MME
code (MMEC) of
each two MMEs
cannot be the same
When
MMECfgNum is
greater than 1,
among all MMEs
configured in a
CellOp MO, the
MME group identity
(MMEGI) and MME
code (MMEC) of
each two MMEs
cannot be the same
When
MMECfgNum is
greater than 1,
among all MMEs
configured in a
CellOp MO, the
MME group identity
(MMEGI) and MME
code (MMEC) of
each two MMEs
cannot be the same
When
MMECfgNum is
greater than 1,
among all MMEs
configured in a
CellOp MO, the
MME group identity
(MMEGI) and MME
code (MMEC) of
each two MMEs
cannot be the same
When
MMECfgNum is
greater than 1,
among all MMEs
configured in a
CellOp MO, the
MME group identity
(MMEGI) and MME
code (MMEC) of
each two MMEs
cannot be the same
When
MMECfgNum is
greater than 1,
among all MMEs
configured in a
CellOp MO, the
MME group identity
(MMEGI) and MME
code (MMEC) of
each two MMEs
cannot be the same
When
MMECfgNum is
greater than 1,
among all MMEs
configured in a
CellOp MO, the
MME group identity
(MMEGI) and MME
code (MMEC) of
each two MMEs
cannot be the same
When
MMECfgNum is
greater than 1,
among all MMEs
configured in a
CellOp MO, the
MME group identity
(MMEGI) and MME
code (MMEC) of
each two MMEs
cannot be the same

No (Modifications
on this parameter
would affect cell
reselection of the
None Read & Write UE in idle mode.) N/A N/A
No (Modifications
on this parameter
would affect cell
reselection of the
This parameter is
optional, depending
on the setting of
SpeedDepReselCfg
Ind.
If
SpeedDepReselCfg
Ind is set to CFG,
TEvaluation must
be set.
If
SpeedDepReselCfg No (Modifications
Ind is set to on this parameter
NOT_CFG, would affect cell
TEvaluation does reselection of the
not need to be set. Read & Write UE in idle mode.) N/A N/A
This parameter is
optional, depending
on the setting of
SpeedDepReselCfg
Ind.
If
SpeedDepReselCfg
Ind is set to CFG,
THystNormal must
be set.
If
THystNormal does reselection of the
In the CellResel
MO, if
SpeedDepReselCf
gInd is set to CFG,
NCellChangeHigh
must be greater
than
NCellChangeMedi
um.
If
SpeedDepReselCf
gInd is set to CFG,
NCellChangeMedi
um must be set.
If
SpeedDepReselCf
gInd is set to No (Modifications
NOT_CFG, on this parameter
NCellChangeMedi would affect cell
um does not need reselection of the
to be set. Read & Write UE in idle mode.) N/A N/A
In the CellResel
MO, if
SpeedDepReselCf
gInd is set to CFG,
NCellChangeHigh
must be greater
than
NCellChangeMedi
um.
If
SpeedDepReselCf
gInd is set to CFG,
NCellChangeHigh
must be set.
If
SpeedDepReselCf
NCellChangeHigh would affect cell
does not need to be reselection of the
set. Read & Write UE in idle mode.) N/A N/A
This parameter is
optional, depending
on the setting of
SpeedDepReselCfg
Ind.
If
SpeedDepReselCfg
Ind is set to CFG,
QHystSfMedium
must be set.
If
SpeedDepReselCfg
Ind is set to No (Modifications
QHystSfMedium would affect cell
This parameter is
optional, depending
on the setting of
SpeedDepReselCfg
Ind.
If
SpeedDepReselCfg
Ind is set to CFG,
QHystSfHigh must
be set.
If
QHystSfHigh does reselection of the
No (Modifications
on this parameter
would affect cell
reselection of the
This parameter is
optional, depending
on the setting of
SNonIntraSearchCf
gInd.
If
SNonIntraSearchCf
gInd is set to CFG,
SNonIntraSearch
needs to be set.
If
SNonIntraSearchCf
SNonIntraSearch would affect cell
No (Modifications
on this parameter
would affect cell
reselection of the
No (Modifications
on this parameter
will affect cell
reselection of the
No (Modifications
on this parameter
would affect cell
reselection of the
No (Modifications
on this parameter
would affect cell
reselection of the
This parameter is
optional, depending
on the setting of
PMaxCfgInd.
If PMaxCfgInd is
set to CFG, PMax
must be set. No (Modifications
If PMaxCfgInd is on this parameter
set to NOT_CFG, would affect cell
PMax does not reselection of the
need to be set. Read & Write UE in idle mode.) N/A N/A
No (Modifications
on this parameter
would affect cell
reselection of the
This parameter is
optional, depending
on the setting of
SIntraSearchCfgInd
.
If
SIntraSearchCfgInd
is set to CFG,
SIntraSearch needs
to be set.
If No (Modifications
SIntraSearchCfgInd on this parameter
is set to NOT_CFG, would affect cell
SIntraSearch does reselection of the
No (Modifications
on this parameter
would affect cell
reselection of the
This parameter is
optional, depending
on the setting of
MeasBandWidthCfg
Ind.
If
MeasBandWidthCfg
Ind is set to CFG,
MeasBandWidth
must be set.
If
MeasBandWidthCfg
MeasBandWidth would affect cell
No (Modifications
on this parameter
would affect cell
reselection of the
No (Modifications
on this parameter
would affect cell
reselection of the
This parameter is
optional, depending
on the setting of
SpeedStateSfCfgIn
d.
If
SpeedStateSfCfgIn
d is set to CFG,
TReselEutranSfMe
dium must be set.
If
SpeedStateSfCfgIn
d is set to No (Modifications
TReselEutranSfMe would affect cell
dium does not need reselection of the
This parameter is
optional, depending
SpeedStateSfCfgIn
d parameter.
If
SpeedStateSfCfgIn
d is set to CFG,
TReselEutranSfHig
h must be set.
If
SpeedStateSfCfgIn
TReselEutranSfHig would affect cell
h does not need to reselection of the
be set. Read & Write UE in idle mode.) N/A N/A
No (Modifications
on this parameter
would affect cell
reselection of the
No (Modifications
on this parameter
would affect cell
reselection of the
No (Modifications
on this parameter
would affect cell
reselection of the
No (Modifications
on this parameter
would affect cell
reselection of the
No (Modifications
on this parameter
would affect cell
reselection of the
This parameter is
optional, depending
on the setting of
ThrshServLowQCfg
Ind.
If
ThrshServLowQCfg
Ind is set to CFG,
this parameter must
be set.
If
ThrshServLowQCfg No (Modifications
NOT_CFG, this would affect cell
parameter does not reselection of the
If QQualMinCfgInd
is set to CFG, the
following cell
reselection
parameters in
compliance with
3GPP Release 9 in
SIB3 will be
set:SIntraSearchQ,
SNonIntraSearchQ,
SIntraSearch,SNonI
ntraSearch and
QQualMin.
If QQualMinCfgInd
is set to NOT_CFG,
the following cell
reselection
parameters in
compliance with
3GPP Release 9 in
SIB3 will not be
set:SIntraSearchQ, No (Modifications
SNonIntraSearchQ, on this parameter
SIntraSearch,SNonI would affect cell
ntraSearch and reselection of the
QQualMin. Read & Write UE in idle mode.) N/A N/A
This parameter is
optional, depending
on the setting of
QQualMinCfgInd.
If QQualMinCfgInd
is set to CFG, this
parameter must be
set. No (Modifications
If QQualMinCfgInd on this parameter
this parameter does reselection of the
No (Modifications
on this parameter
would affect cell
reselection of the
This parameter is
optional, depending
on the setting of
SysTimeCfgInd.
If SysTimeCfgInd is
set to CFG,
CdmaEutraSyn
must be set.
If SysTimeCfgInd is No (Modifications
set to NOT_CFG, on this parameter
CdmaEutraSyn would affect cell
No (Modifications
on this parameter
would affect cell
reselection of the
This parameter is
optional, depending
on the setting of
SearchWndSizeCfg
Ind.
If
SearchWndSizeCfg
Ind is set to CFG,
SearchWndSize
must be set.
If
SearchWndSizeCfg
SearchWndSize would affect cell
No (Modifications
on this parameter
would affect cell
reselection of the
This parameter is
optional, depending
on the setting of
HrpdParaCfgInd.
If HrpdParaCfgInd
is set to CFG,
HrpdCellReselectP
aramCfgInd must
be set.
If HrpdParaCfgInd No (Modifications
is set to NOT_CFG, on this parameter
HrpdCellReselectP would affect cell
aramCfgInd does reselection of the
This parameter is
optional, depending
on the setting of
HrpdCellReselectP
aramCfgInd.
If
HrpdCellReselectP
aramCfgInd is set
to CFG,
TreselectionHrpd
must be set.
If
HrpdCellReselectP
aramCfgInd is set No (Modifications
to NOT_CFG, on this parameter
TreselectionHrpd would affect cell
on the setting of
HrpdCellReselectP
aramCfgInd.
If
HrpdCellReselectP
aramCfgInd is set
to CFG,
SpeedStateSfCfgIn
d must be set.
If
HrpdCellReselectP
aramCfgInd is set
to NOT_CFG,
SpeedStateSfCfgIn
d does not need to
be set.
2 If
SpeedStateSfCfgIn
d is set to CFG, the
following
parameters must be
set:
TReselCdmaHrpdSf
Medium and
TReselCdmaHrpdSf
High.
If
SpeedStateSfCfgIn
d is set to
NOT_CFG, the
following
parameters do not
need to be set: No (Modifications
TReselCdmaHrpdSf on this parameter
Medium and would affect cell
TReselCdmaHrpdSf reselection of the
High. Read & Write UE in idle mode.) N/A N/A
This parameter is
optional, depending
on the setting of
SpeedStateSfCfgIn
d.
If
SpeedStateSfCfgIn
d is set to CFG,
TReselCdmaHprdSf
High must be set.
If
SpeedStateSfCfgIn
TReselCdmaHprdSf would affect cell
High does not need reselection of the
This parameter is
optional, depending
on the setting of
SpeedStateSfCfgIn
d.
If
SpeedStateSfCfgIn
d is set to CFG,
TReselCdmaHrpdSf
Medium must be
set.
If
SpeedStateSfCfgIn
TReselCdmaHrpdSf would affect cell
Medium does not reselection of the
No (Modifications
on this parameter
would affect cell
reselection of the
This parameter is
optional, depending
on the setting of
Cdma1XrttParaCfgI
nd.
If
Cdma1XrttParaCfgI
nd is set to CFG,
Cdma1XrttLongCod
eStateCfgInd must
be set.
If
Cdma1XrttParaCfgI
nd is set to No (Modifications
Cdma1XrttLongCod would affect cell
eStateCfgInd does reselection of the
This parameter is
optional, depending
on the setting of
Cdma1XrttParaCfgI
nd.
If
Cdma1XrttParaCfgI
nd is set to CFG,
Cdma1XrttCellRese
lCfgInd must be set.
If
Cdma1XrttParaCfgI
Cdma1XrttCellRese would affect cell
lCfgInd does not reselection of the
This parameter is
optional, depending
on the setting of
Cdma1XrttCellRese
lCfgInd.
If
Cdma1XrttCellRese
lCfgInd is set to
CFG,
Cdma1XrttTreselect
ion must be set.
If
Cdma1XrttCellRese
lCfgInd is set to No (Modifications
Cdma1XrttTreselect would affect cell
ion does not need reselection of the
This parameter is
optional, depending
on the setting of
Cdma1XrttCellRese
lCfgInd.
If
Cdma1XrttCellRese
lCfgInd is set to
CFG,
Cdma1XrttSpeedSt
ateCfgInd must be
set.
If
Cdma1XrttCellRese
lCfgInd is set to No (Modifications
Cdma1XrttSpeedSt would affect cell
ateCfgInd does not reselection of the
This parameter is
optional, depending
on the setting of
Cdma1XrttSpeedSt
ateCfgInd.
If
Cdma1XrttSpeedSt
ateCfgInd is set to
CFG,
Cdma1XrttSfMediu
m must be set.
If
Cdma1XrttSpeedSt
ateCfgInd is set to No (Modifications
Cdma1XrttSfMediu would affect cell
m does not need to reselection of the
This parameter is
optional. Whether
to set this
parameter is
determined by the
parameter
Cdma1XrttSpeedSt
ateCfgInd.
When
Cdma1XrttSpeedSt
ateCfgInd is set to
CFG,
Cdma1XrttSfHigh
needs to be set.
When
Cdma1XrttSpeedSt
ateCfgInd is set to No (Modifications
Cdma1XrttSfHigh would affect cell

No (Modifications
on this parameter
would affect cell
reselection of the
No (Modifications
on this parameter
would affect cell
reselection of the
This parameter is
optional, depending
on the setting of
SpeedStateSfCfgIn
d.
If
SpeedStateSfCfgIn
d is set to CFG,
TReselGeranSfMed
ium must be set.
If
SpeedStateSfCfgIn
TReselGeranSfMed would affect cell
ium does not need reselection of the
This parameter is
optional, depending
on the setting of
SpeedStateSfCfgIn
d.
If
SpeedStateSfCfgIn
d is set to CFG,
TReselGeranSfHigh
must be set.
If
SpeedStateSfCfgIn
TReselGeranSfHigh would affect cell
No (Modifications
on this parameter
would affect cell
reselection of the
No (Modifications
on this parameter
would affect cell
reselection of the
This parameter is
optional, depending
SpeedStateSfCfgIn
d parameter.
If
SpeedStateSfCfgIn
d is set to CFG,
TReselUtranSfMedi
um must be set.
If
SpeedStateSfCfgIn
TReselUtranSfMedi would affect cell
um does not need reselection of the
This parameter is
optional, depending
SpeedStateSfCfgIn
d parameter.
If
SpeedStateSfCfgIn
d is set to CFG,
TReselUtranSfHigh
must be set.
If
SpeedStateSfCfgIn
TReselUtranSfHigh would affect cell
No (Modifications
on this parameter
would affect cell
reselection of the
No (Modifications
on this parameter
would affect cell
reselection of the
No (Modifications
on this parameter
would affect cell
selection of the UE
None Read & Write in idle mode.) N/A N/A
No (Modifications
on this parameter
would affect cell
selection of the UE
None Read & Write in idle mode.) N/A N/A
This parameter is
optional, depending
on the setting of
QQualMinOffsetCfg
Ind.
If
QQualMinOffsetCfg
Ind is set to CFG,
this parameter must
be set.
If
QQualMinOffsetCfg No (Modifications
NOT_CFG, this would affect cell
parameter does not selection of the UE
need to be set. Read & Write in idle mode.) N/A N/A

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
Less than 0.1

No (And no impact
on the UE in idle
Less than 0.1

Less than 0.1



No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

In the Cell MO, the
value of CellName
is a string of a
maximum of 99
characters. The
null characters or
contain any of the
following
characters:double
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three plus
signs (+++), two or
more consecutive
spaces, and two or
more consecutive No (And no impact
percentage signs on the UE in idle
(%). Read & Write mode) N/A N/A
CsgInd in a Cell
MO must be set to Less than 0.1
BOOLEAN_FALSE. Read & Write Yes Cell minute
to
BOOLEAN_TRUE
and
MultiRruCellMode
in a Cell MO is set
to
DIGITAL_COMBINA
TION,
DlCyclicPrefix and
UlCyclicPrefix in
Cell MO must be
set to
NORMAL_CP.
In a Cell MO, if
CellActiveState is
set to
CELL_ACTIVE and
TxRxMode is set to
8T8R, neither
UlCyclicPrefix nor
DlCyclicPrefix can
be set to
EXTENDED_CP.
In a Cell MO, if
FddTddInd,
MultiRruCellFlag
and
MultiRruCellMode
are set to
CELL_FDD,
BOOLEAN_TRUE
and SFN,
respectively,
DlCyclicPrefix and
UlCyclicPrefix
must be set to Less than 0.1
NORMAL_CP. Read & Write Yes Cell minute
to
BOOLEAN_TRUE
and
MultiRruCellMode
in a Cell MO is set
to
DIGITAL_COMBINA
TION,
DlCyclicPrefix and
UlCyclicPrefix in
Cell MO must be
set to
NORMAL_CP.
In a Cell MO, if
CellActiveState is
set to
CELL_ACTIVE and
TxRxMode is set to
8T8R, neither
UlCyclicPrefix nor
DlCyclicPrefix can
be set to
EXTENDED_CP.
In a Cell MO, if
FddTddInd,
MultiRruCellFlag
and
MultiRruCellMode
are set to
CELL_FDD,
BOOLEAN_TRUE
and SFN,
respectively,
DlCyclicPrefix and
UlCyclicPrefix
must be set to Less than 0.1
NORMAL_CP. Read & Write Yes Cell minute
In a Cell MO,
DlEarfcn must be
set based on the
setting of
FreqBand. For
details, see 3GPP
TS 36.104.
In a Cell MO,
UlEarfcn must be
set based on the
setting of
FreqBand. For
details, see 3GPP Less than 0.1
TS 36.104. Read & Write Yes Cell minute
In a Cell MO, if
FddTddInd is set to
CELL_TDD and
UlEarfcnCfgInd is
set to CFG,
DlEarfcn and
UlEarfcn must be
set to the same Less than 0.1
value. Read & Write Yes Cell minute
In a Cell MO, if
FddTddInd is set to
CELL_TDD and
UlEarfcnCfgInd is
set to CFG,
DlEarfcn and
UlEarfcn must be
set to the same
value.
In a Cell MO,
UlEarfcn must be
set based on the
setting of
FreqBand. For
details, see 3GPP
TS 36.104.
If UlEarfcnCfgInd
is set to CFG,
UlEarfcn must be
set.
If UlEarfcnCfgInd
is set to NOT_CFG,
UlEarfcn does not Less than 0.1
need to be set. Read & Write Yes Cell minute
In a Cell MO,
DlEarfcn must be
set based on the
setting of
FreqBand. For
details, see 3GPP
TS 36.104.
In a Cell MO, if
FddTddInd is set to
CELL_TDD and
UlEarfcnCfgInd is
set to CFG,
DlEarfcn and
UlEarfcn must be
set to the same Less than 0.1
value. Read & Write Yes Cell minute
UlBandWidth must
one of the following
combinations(DlBan
dWidth/UlBandWidt
h):
CELL_BW_N15/CE
LL_BW_N15;
CELL_BW_N15/CE
LL_BW_N25;
CELL_BW_N15/CE
LL_BW_N50;
CELL_BW_N25/CE
LL_BW_N15;
CELL_BW_N25/CE
LL_BW_N25;
CELL_BW_N25/CE
LL_BW_N50;
CELL_BW_N50/CE
LL_BW_N15;
CELL_BW_N50/CE
LL_BW_N25;
CELL_BW_N50/CE
LL_BW_N50;
CELL_BW_N100/C
ELL_BW_N25;
CELL_BW_N100/C
ELL_BW_N50.
When the
AirCellFlag in Cell
MO is not
BOOLEAN_TRUE,
DlBandWidth and
UlBandWidth must
be set to the same
value in each Cell Less than 0.1
MO. Read & Write Yes Cell minute
CELL_BW_N25/CE
LL_BW_N15;
CELL_BW_N25/CE
LL_BW_N25;
CELL_BW_N25/CE
LL_BW_N50;
CELL_BW_N50/CE
LL_BW_N15;
CELL_BW_N50/CE
LL_BW_N25;
CELL_BW_N50/CE
LL_BW_N50;
CELL_BW_N100/C
ELL_BW_N25;
CELL_BW_N100/C
ELL_BW_N50.
When the
AirCellFlag in Cell
MO is not
BOOLEAN_TRUE,
DlBandWidth and
UlBandWidth must
be set to the same
value in each Cell
MO.
In a Cell MO, if
FddTddInd and
WorkMode are set
to CELL_FDD and
DL_ONLY,
respectively,
DlBandWidth must
be set to
CELL_BW_N25,
CELL_BW_N50,
CELL_BW_N75, or Less than 0.1
CELL_BW_N100. Read & Write Yes Cell minute
CellId must have a

unique value in
each Cell MO
under the same Less than 0.1
eNodeB. Read & Write Yes Cell minute
In a Cell MO, if
CustomizedBand
WidthCfgInd is set
to CFG and
CustomizedDLBan
dWidth is set to a
value in the range
of 183 to 192,
PhyCellId must be
set to a value in
ranges: 8 to 41, 74
to 78, 108 to 110,
139 to 141, 158 to
175, 208 to 241,
270 to 274, 335 to
341, 358 to 371,
408 to 437, and 466 Less than 0.1
to 470. Read & Write Yes Cell minute
No (And no impact
on the UE in idle
TION, respectively,
TxRxMode must be
set to 1T1R or
2T2R.
In a Cell MO, if
CellActiveState is
set to
CELL_ACTIVE and
TxRxMode is set to
8T8R, neither
UlCyclicPrefix nor
DlCyclicPrefix can
be set to
EXTENDED_CP.
In a Cell MO, if
CellActiveState is
set to
CELL_ACTIVE and
TxRxMode is set to
8T8R,
HighSpeedFlag
must be set to
LOW_SPEED or
HIGH_SPEED.
In a Cell MO, if
CellActiveState,
FddTddInd and
CPRICompression
are set to
CELL_ACTIVE,
CELL_FDD and
NORMAL_COMPR
ESSION,
respectively,
TxRxMode must be
set to 1T1R, 1T2R, Until the cell is
or 2T2R. Read & Write Yes Cell activated
Until the cell is
None Read & Write Yes Cell unblocked
This parameter
needs to be
specified only when
the CellAdminState
is set to No (And no impact
CELL_MIDDLE_BL on the UE in idle
OCK. Read & Write mode) N/A N/A
FddTddInd is set to
FDD,
MultiRruCellFlag
and
MultiRruCellMode
are set to
BOOLEAN_TRUE
and
MPRU_AGGREGA
TION, respectively,
TxRxMode must be
set to 2T2R or
1T1R.
If FddTddInd,
MultiRruCellFlag,
and
MultiRruCellMode
in a Cell MO are
set to CELL_FDD,
BOOLEAN_TRUE,
and SFN,
respectively,
TxRxMode in the
Cell MO must be
set to 2T2R or
1T1R.
In a Cell MO, if
MultiRruCellFlag
and
MultiRruCellMode
are set to
BOOLEAN_TRUE
and
CELL_COMBINATI
ON, respectively,
FddTddInd must Less than 0.1
be set to TDD. Read & Write Yes Cell minute
ent:
(1) If PreambleFmt
is set to 0,
SubframeAssignm
ent can be set to
SA0, SA1, SA2,
SA3, or SA5;
(2) If PreambleFmt
is set to 1,
SubframeAssignm
ent can be set to
SA0, SA1, or SA3;
(3) If PreambleFmt
is set to 2,
SubframeAssignm
ent can be set to
SA0, SA1, or SA3;
(4) If PreambleFmt
is set to 3,
SubframeAssignm
ent can be set to
SA0 or SA3;
(5) If PreambleFmt
is set to 4,
SubframeAssignm
ent can be set to
SA0, SA1, SA2,
SA3, or SA5.
If FddTddInd is set
to CELL_TDD,
SubframeAssignm
ent must be set.
If FddTddInd is set
to CELL_FDD,
SubframeAssignm
ent does not need Less than 0.1
to be set. Read & Write Yes Cell minute
EXTENDED_CP
and DlCyclicPrefix
is set to
NORMAL_CP,
SpecialSubframeP
atterns can be set
to SSP4, SSP5,
SSP6, or SSP7;
(4) If
UlCyclicPrefix is
set to NORMAL_CP
and DlCyclicPrefix
is set to
EXTENDED_CP,
SpecialSubframeP
atterns can be set
to SSP3, SSP4,
SSP5, or SSP6.
In a Cell MO, if
FddTddInd is set to
CELL_TDD and
PreambleFmt is set
to 4,
SpecialSubframeP
atterns must be set
to a value greater
than SSP4.
If FddTddInd is set
to CELL_TDD,
SpecialSubframeP
atterns must be
set.
If FddTddInd is set
to CELL_FDD,
SpecialSubframeP
atterns does not Less than 0.1
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
RootSequenceIdx
is 168~676;
(12)
13200m(43307ft) <
CellRadius <=
17200m(56430ft):
the value range of
RootSequenceIdx
is 204~602;
(13)
17200m(56430ft) <
CellRadius <=
21500m(70537ft):
the value range of
RootSequenceIdx
is 264~566;
(14)
21500m(70537ft) <
CellRadius <=
27800m(91206ft):
the value range of
RootSequenceIdx
is 328~498;
(15)
27800m(91206ft) <
CellRadius <=
32800m(107610ft):
the value range of
RootSequenceIdx
is 384~450.
In a Cell MO, if
AirCellFlag is set to
BOOLEAN_TRUE,
RootSequenceIdx
must be set to a
value smaller than Less than 0.1
or equal to 69. Read & Write Yes Cell minute
FddTddInd is
CELL_TDD and
DlBandWidth is
CELL_BW_N25,
HighSpeedFlag is
not be
ULTRA_HIGH_SPE
ED.
HighSpeedFlag in a
Cell MO can not be
set to
EXTRA_HIGH_SPE
ED.
In a Cell MO, if
CellActiveState is
set to
CELL_ACTIVE and
TxRxMode is set to
8T8R,
HighSpeedFlag
must be set to
LOW_SPEED or
HIGH_SPEED.
In a Cell MO, if
FddTddInd,
MultiRruCellFlag
and
MultiRruCellMode
are set to
CELL_FDD,
BOOLEAN_TRUE
and SFN,
respectively,
HighSpeedFlag
must be set to
LOW_SPEED or Less than 0.1
HIGH_SPEED. Read & Write Yes Cell minute
RootSequenceIdx
is 136~706;
(11)
10600m(34776ft) <
CellRadius <=
13200m(43307ft):
the value range of
RootSequenceIdx
is 168~676;
(12)
13200m(43307ft) <
CellRadius <=
17200m(56430ft):
the value range of
RootSequenceIdx
is 204~602;
(13)
17200m(56430ft) <
CellRadius <=
21500m(70537ft):
the value range of
RootSequenceIdx
is 264~566;
(14)
21500m(70537ft) <
CellRadius <=
27800m(91206ft):
the value range of
RootSequenceIdx
is 328~498;
(15)
27800m(91206ft) <
CellRadius <=
32800m(107610ft):
the value range of
RootSequenceIdx Less than 0.1
is 384~450. Read & Write Yes Cell minute
RootSequenceIdx
is 136~706;
(11)
10600m(34776ft) <
CellRadius <=
13200m(43307ft):
the value range of
RootSequenceIdx
is 168~676;
(12)
13200m(43307ft) <
CellRadius <=
17200m(56430ft):
the value range of
RootSequenceIdx
is 204~602;
(13)
17200m(56430ft) <
CellRadius <=
21500m(70537ft):
the value range of
RootSequenceIdx
is 264~566;
(14)
21500m(70537ft) <
CellRadius <=
27800m(91206ft):
the value range of
RootSequenceIdx
is 328~498;
(15)
27800m(91206ft) <
CellRadius <=
32800m(107610ft):
the value range of
RootSequenceIdx Less than 0.1
is 384~450. Read & Write Yes Cell minute
CustomizedDLBan
dWidth must be set
to a value in the
range of 48 to 50;
If DlBandWidth is
set to
CELL_BW_N50,
CustomizedDLBan
dWidth must be set
to a value in the
range of 96 to 100;
If DlBandWidth is
set to
CELL_BW_N75,
CustomizedDLBan
dWidth must be set
to a value in the
range of 146 to
150;
If DlBandWidth is
set to
CELL_BW_N100,
CustomizedDLBan
dWidth must be set
to a value in the
range of 183 to
200.
In a Cell MO, if
CustomizedBand
WidthCfgInd is set
to CFG,
CustomizedULBan
dWidth and
CustomizedDLBan
dWidth cannot both
be set to 50, 100, Less than 0.1
150, or 200. Read & Write Yes Cell minute
CustomizedULBan
dWidth must be set
to a value in the
range of 146 to
150;
If UlBandWidth is
set to
CELL_BW_N100,
CustomizedULBan
dWidth must be set
to a value in the
range of 183 to
200.
In a Cell MO, if
CustomizedBand
WidthCfgInd is set
to CFG,
CustomizedULBan
dWidth and
CustomizedDLBan
dWidth cannot both
be set to 50, 100,
150, or 200.
If
CustomizedBand
WidthCfgInd is set
to CFG,
CustomizedULBan
dWidth must be
set.
If
CustomizedBand
WidthCfgInd is set
to NOT_CFG,
CustomizedULBan
dWidth does not Less than 0.1
value in the range
of 183 to 192,
PhyCellId must be
set to a value in
ranges: 8 to 41, 74
to 78, 108 to 110,
139 to 141, 158 to
175, 208 to 241,
270 to 274, 335 to
341, 358 to 371,
408 to 437, and 466
to 470.
In a Cell MO, if
CustomizedBand
WidthCfgInd is set
to CFG,
CustomizedULBan
dWidth and
CustomizedDLBan
dWidth cannot both
be set to 50, 100,
150, or 200.
If
CustomizedBand
WidthCfgInd is set
to CFG,
CustomizedDLBan
dWidth must be
set.
If
CustomizedBand
WidthCfgInd is set
to NOT_CFG,
CustomizedDLBan
dWidth does not Less than 0.1
No (And no impact
on the UE in idle
EmergencyAreaId
is optional,
depending on the
setting of
EmergencyAreaIdC
fgInd.
If
EmergencyAreaIdC
fgInd is set to CFG,
EmergencyAreaId
must be set.
If
EmergencyAreaIdC
fgInd is set to
NOT_CFG,
EmergencyAreaId No (And no impact
No (Modifications
on this parameter
would affect cell
reselection of the
When the
AirCellFlag in Cell
MO is
BOOLEAN_TRUE,
the range of the
UePowerMax is
-27~36.
When the
AirCellFlag in Cell
MO is not
BOOLEAN_TRUE,
the range of the
UePowerMax is
-30~33.
If
UePowerMaxCfgIn
d is set to CFG,
UePowerMax must
be set.
If
UePowerMaxCfgIn No (Modifications
d is set to on this parameter
UePowerMax does reselection of the
and
MultiRruCellMode
set to SFN, or
MultiRruCellFlag
set to
BOOLEAN_FALSE
if
EuCellStandbyMo
de is set to
STANDBY.
In a Cell MO, if
FddTddInd is set to
FDD,
MultiRruCellFlag
and
MultiRruCellMode
are set to
BOOLEAN_TRUE
and
MPRU_AGGREGA
TION, respectively,
TxRxMode must be
set to 2T2R or
1T1R.
If FddTddInd,
MultiRruCellFlag,
and
MultiRruCellMode
in a Cell MO are
set to CELL_FDD,
BOOLEAN_TRUE,
and SFN,
respectively,
TxRxMode in the
Cell MO must be
set to 2T2R or Less than 0.1
1T1R. Read & Write Yes Cell minute
and
MultiRruCellMode
set to SFN, or
MultiRruCellFlag
set to
BOOLEAN_FALSE
if
EuCellStandbyMo
de is set to
STANDBY.
In a Cell MO, if
FddTddInd is set to
FDD,
MultiRruCellFlag
and
MultiRruCellMode
are set to
BOOLEAN_TRUE
and
MPRU_AGGREGA
TION, respectively,
TxRxMode must be
set to 2T2R or
1T1R.
If FddTddInd,
MultiRruCellFlag,
and
MultiRruCellMode
in a Cell MO are
set to CELL_FDD,
BOOLEAN_TRUE,
and SFN,
respectively,
TxRxMode in the
Cell MO must be
In the Cell MO, if
FddTddInd is
CELL_TDD and
DlBandWidth is
CELL_BW_N25,
CPRICompression
must be set
NO_COMPRESSIO
N.
In the Cell MO, if
FddTddInd is
CELL_TDD and
DlBandWidth is
CELL_BW_N50 or
CELL_BW_N100,
CPRICompression
can be set to
NO_COMPRESSIO
N or
NORMAL_COMPR
ESSION, if
DlBandWidth is
other values,
CPRICompression
must be set
NO_COMPRESSIO
N.
In the Cell MO, if
FddTddInd is
CELL_FDD and
DlBandWidth is
CELL_BW_N6 or
CELL_BW_N15,
CPRICompression
must be set
NO_COMPRESSIO Less than 0.1
N. Read & Write Yes Cell minute
If the
MultiRruCellMode
parameter is set to
SFN, the
SectorEqmNum
parameter must be
set.
If the
MultiRruCellMode
parameter is not set
to SFN, the
SectorEqmNum
parameter does not Less than 0.1
CELL_BW_N100/C
ELL_BW_N25;
CELL_BW_N100/C
ELL_BW_N50.
In a Cell MO, if
AirCellFlag is set
to
BOOLEAN_TRUE,
RootSequenceIdx
must be set to a
value smaller than
or equal to 69.
When the
AirCellFlag in Cell
MO is
BOOLEAN_TRUE,
the range of the
UePowerMax is
-27~36.
When the
AirCellFlag in Cell
MO is not
BOOLEAN_TRUE,
the range of the
UePowerMax is
-30~33.
When the
AirCellFlag in Cell
MO is
BOOLEAN_TRUE,
FddTddInd must
be CELL_FDD.
The value of
AirCellFlag in all
Cell MOs under an
eNodeB must be Less than 0.1
the same. Read & Write Yes Cell minute
Less than 0.1
MultiRruCellFlag
and
MultiRruCellMode
are set to
BOOLEAN_TRUE
and
MPRU_AGGREGA
TION, respectively,
TxRxMode must be
set to 2T2R.
In a Cell MO, if
FddTddInd is set to
FDD,
MultiRruCellFlag
and
MultiRruCellMode
are set to
BOOLEAN_TRUE
and
MPRU_AGGREGA
TION, respectively,
TxRxMode must be
set to 2T2R or
1T1R.
If FddTddInd,
MultiRruCellFlag,
and
MultiRruCellMode
in a Cell MO are
set to CELL_FDD,
BOOLEAN_TRUE,
and SFN,
respectively,
TxRxMode in the
Cell MO must be
No (And no impact
on the UE in idle
In a Cell MO, if
FddTddInd and
WorkMode are set
to CELL_FDD and
DL_ONLY,
respectively,
DlBandWidth must
be set to
CELL_BW_N25,
CELL_BW_N50,
CELL_BW_N75, or
CELL_BW_N100.
In a Cell MO,
WorkMode must be
set to UL_DL if
FddTddInd is set to Less than 0.1
CELL_TDD. Read & Write Yes Cell minute
In a Cell MO,
MultiRruCellFlag
set to
BOOLEAN_TRUE
and
MultiRruCellMode
set to SFN, or
MultiRruCellFlag
set to
BOOLEAN_FALSE
if
EuCellStandbyMo
de is set to Less than 0.1
STANDBY. Read & Write Yes Cell minute






In a Cell MO, if
FddTddInd is set to
CELL_FDD, No (And no impact
MultiBand is on the UE in idle
forbidden. Read & Write mode) N/A N/A

Less than 0.1

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle



No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
If the
LowPwrSwitch
parameter is set to
ON, the
LowPwrOrder
parameter must be
set.
If the
LowPwrSwitch
parameter is set to
OFF, the
LowPwrOrder No (And no impact
If the LowPwrOrder
parameter is set to
OFF, the StartTime
parameter must be
set.
If the LowPwrOrder
parameter is set to
ON, the StartTime No (And no impact
If the LowPwrOrder
parameter is set to
OFF, the StopTime
parameter must be
set.
If the LowPwrOrder
parameter is set to
ON, the StopTime No (And no impact
If the
BakPwrSavPolicy
parameter is set to
CUSTOMIZED, the
CellUsedPwrReduc
eTimeLen
parameter must be
set.
If the
BakPwrSavPolicy
to CUSTOMIZED,
the
CellUsedPwrReduc
eTimeLen No (And no impact
If the
BakPwrSavPolicy
parameter is set to
CUSTOMIZED, the
RsPwrReduceTime
Len parameter
must be set.
If the
BakPwrSavPolicy
to CUSTOMIZED,
the
RsPwrReduceTime
Len parameter No (And no impact
If the
BakPwrSavPolicy
parameter is set to
CUSTOMIZED, the
RfShutDownTimeLe
n parameter must
be set.
If the
BakPwrSavPolicy
to CUSTOMIZED,
the
RfShutDownTimeLe No (And no impact
n parameter does on the UE in idle
If the
BakPwrSavPolicy
parameter is set to
CUSTOMIZED, the
CellUsedPwrRatio
parameter must be
set.
If the
BakPwrSavPolicy
to CUSTOMIZED,
the
CellUsedPwrRatio No (And no impact
If the
BakPwrSavPolicy
parameter is set to
CUSTOMIZED, the
RsPwrAdjOffset
parameter must be
set.
If the
BakPwrSavPolicy
to CUSTOMIZED,
the RsPwrAdjOffset No (And no impact
If the
BakPwrSavPolicy
parameter is set to
CUSTOMIZED, the
EnterTimeLen
parameter must be
set.
If the
BakPwrSavPolicy
to CUSTOMIZED,
the EnterTimeLen No (And no impact
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
In the CellMro MO,
if
CioAdjLimitCfgInd
is set to CFG,
CioAdjLowerLimit
must be smaller
than
CioAdjUpperLimit.
If
CioAdjLimitCfgInd
is set to CFG,
CioAdjUpperLimit
must be set.
If
CioAdjLimitCfgInd
is set to NOT_CFG,
CioAdjUpperLimit No (And no impact
In the CellMro MO,
if
CioAdjLimitCfgInd
is set to CFG,
CioAdjLowerLimit
must be smaller
than
CioAdjUpperLimit.
If
CioAdjLimitCfgInd
is set to CFG,
CioAdjLowerLimit
must be set.
If
CioAdjLimitCfgInd
is set to NOT_CFG,
CioAdjLowerLimit No (And no impact
In the CellRacThd
MO,
GoldServiceArpTh
d must be smaller
SilverServiceArpT on the UE in idle
hd. Read & Write mode) N/A N/A
In the CellRacThd
MO,
GoldServiceArpTh
d must be smaller
SilverServiceArpT on the UE in idle
hd. Read & Write mode) N/A N/A
In the CellRacThd
MO, the sum of
NewCopperServic
eOffset and
Qci1HoThd must
be smaller than or
equal to 100.
In the CellRacThd
MO, the sum of
Qci1CongThd and
CongRelOffset No (And no impact
than Qci1HoThd. Read & Write mode) N/A N/A
In the CellRacThd
MO, the sum of
NewCopperServic
eOffset and
Qci2HoThd must
be smaller than or
equal to 100.
In the CellRacThd
MO, the sum of
Qci2CongThd and
In the CellRacThd
MO, the sum of
NewCopperServic
eOffset and
Qci3HoThd must
be smaller than or
equal to 100.
In the CellRacThd
MO, the sum of
Qci3CongThd and
In the CellRacThd
MO, the sum of
NewCopperServic
eOffset and
Qci4HoThd must
be smaller than or
equal to 100.
In the CellRacThd
MO, the sum of
Qci4CongThd and
In the CellRacThd
MO,
NewGoldServiceO
ffset must be
smaller than or
NewSilverService on the UE in idle
Offset. Read & Write mode) N/A N/A
In the CellRacThd
MO,
NewGoldServiceO
ffset must be
smaller than or
equal to
NewSilverService
Offset.
In the CellRacThd
MO,
NewSilverService
Offset must be
smaller than or
NewCopperServic on the UE in idle
eOffset. Read & Write mode) N/A N/A
In the CellRacThd
MO,
NewSilverService
Offset must be
smaller than or
equal to
NewCopperServic
eOffset.
In the CellRacThd
MO, the sum of
NewCopperServic
eOffset and
Qci1HoThd must
be smaller than or
equal to 100.
In the CellRacThd
MO, the sum of
NewCopperServic
eOffset and
Qci2HoThd must
be smaller than or
equal to 100.
In the CellRacThd
MO, the sum of
NewCopperServic
eOffset and
Qci3HoThd must
be smaller than or
equal to 100.
In the CellRacThd
MO, the sum of
NewCopperServic
eOffset and
Qci4HoThd must No (And no impact
In the CellRacThd
MO, the sum of
Qci1CongThd and
In the CellRacThd
MO, the sum of
Qci2CongThd and
CongRelOffset
must be smaller
than Qci2HoThd.
In the CellRacThd
MO, the sum of
Qci2CongThd and
CongRelOffset
must be smaller
CopperGbrCongPr on the UE in idle
oportion. Read & Write mode) N/A N/A
In the CellRacThd
MO, the sum of
Qci3CongThd and
CongRelOffset
must be smaller
than Qci3HoThd.
In the CellRacThd
MO, the sum of
Qci3CongThd and
CongRelOffset
must be smaller
In the CellRacThd
MO, the sum of
Qci4CongThd and
CongRelOffset
must be smaller
than Qci4HoThd.
In the CellRacThd
MO, the sum of
Qci4CongThd and
CongRelOffset
must be smaller
In the CellRacThd
MO,
GoldGbrCongProp
ortion must be
greater than or
SilverGbrCongPro on the UE in idle
portion. Read & Write mode) N/A N/A
In the CellRacThd
MO,
GoldGbrCongProp
ortion must be
greater than or
equal to
SilverGbrCongPro
portion.
In the CellRacThd
MO,
SilverGbrCongPro
portion must be
greater than or
In the CellRacThd
MO,
SilverGbrCongPro
portion must be
greater than or
equal to
CopperGbrCongPr
oportion.
In the CellRacThd
MO, the sum of
Qci2CongThd and
CongRelOffset
must be smaller
than
CopperGbrCongPr
oportion.
In the CellRacThd
MO, the sum of
Qci3CongThd and
CongRelOffset
must be smaller
than
CopperGbrCongPr
oportion.
In the CellRacThd
MO, the sum of
Qci4CongThd and
CongRelOffset
must be smaller
In the CellRacThd
MO,
GbrRbUsedHighT
hd must be greater
GbrRbUsedLowTh on the UE in idle
d. Read & Write mode) N/A N/A
In the CellRacThd
MO,
GbrRbUsedHighT
hd must be greater
GbrRbUsedLowTh on the UE in idle
d. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
than Qci2HoThd.
In the CellRacThd
MO, the sum of
Qci3CongThd and
CongRelOffset
must be smaller
than Qci3HoThd.
In the CellRacThd
MO, the sum of
Qci4CongThd and
CongRelOffset
must be smaller
than Qci4HoThd.
In the CellRacThd
MO, the sum of
Qci2CongThd and
CongRelOffset
must be smaller
than
CopperGbrCongPr
oportion.
In the CellRacThd
MO, the sum of
Qci3CongThd and
CongRelOffset
must be smaller
than
CopperGbrCongPr
oportion.
In the CellRacThd
MO, the sum of
Qci4CongThd and
CongRelOffset
must be smaller
No (And no impact
on the UE in idle
In the CellRacThd
MO, UlRbHighThd No (And no impact
than UlRbLowThd. Read & Write mode) N/A N/A
In the CellRacThd
MO, DlRbHighThd No (And no impact
than DlRbLowThd. Read & Write mode) N/A N/A
In the CellRacThd
MO, UlRbHighThd No (And no impact
than UlRbLowThd. Read & Write mode) N/A N/A
In the CellRacThd
MO, DlRbHighThd No (And no impact
than DlRbLowThd. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
PresenceAntennaP No (And no impact

ort1 must be set as on the UE in idle
required. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In the
CellRfShutdown
MO, the sum of
DlPrbThd and
DlPrbOffset must No (And no impact
In the
CellRfShutdown
MO, the sum of
UlPrbThd and
UlPrbOffset must No (And no impact
In the
CellRfShutdown
MO, the sum of
DlPrbThd and
In the
CellRfShutdown
MO, the sum of
UlPrbThd and
No (And no impact
on the UE in idle
Less than 0.1
Less than 0.1


When both of
DSCPRemarkSwitc
h(DSCPRemarkSwi
tch) and
FPIGTPUSwitch(FP
IGTPUSwitch) are
turned on, only the
former ralated
feature is enabled No (And no impact
actually, but not the on the UE in idle
later. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In the
CellShutdown MO,
the sum of
DlPrbThd and
In the
CellShutdown MO,
the sum of
DlPrbThd and
In the
CellShutdown MO,
the sum of
UlPrbThd and
In the
CellShutdown MO,
the sum of
UlPrbThd and
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
Less than 0.1
Less than 0.1
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

If
PrachConfigIndexC
fgInd in the
RACHCfg MO is set
to NOT_CFG and
RachAdjSwitch is
turned on, the
RACH resources in
the cell can be
adaptively adjusted
based on the
access type and the No (And no impact
number of access on the UE in idle
attempts. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
Less than 0.1
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In a
CellAlgoSwitch
MO, the
InterFreqMlbSwitch
and
InterFreqBlindMlbS
witch under the
MlbAlgoSwitch No (And no impact
cannot be turned on on the UE in idle
simultaneously. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
PsicSwitch in the
CellAlgoSwitch
MO is set to On
only if
UlVmimoSwitch
under UlSchSwitch
in a No (And no impact
CellAlgoSwitch on the UE in idle
MO is set to On. Read & Write mode) N/A N/A
Less than 0.1

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
Less than 0.1

Less than 0.1

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
Less than 0.1

No (And no impact
on the UE in idle
PsicSwitch in the
CellAlgoSwitch
MO is set to On
only if
UlVmimoSwitch
under UlSchSwitch
in a No (And no impact
CellAlgoSwitch on the UE in idle
MO is set to On. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
Less than 0.1
In the
CellDlschAlgo MO,
OtherServiceWeig
ht must be greater No (And no impact
than or equal to on the UE in idle
BtServiceWeight. Read & Write mode) N/A N/A
In the
CellDlschAlgo MO,
OtherServiceWeig
ht must be greater No (And no impact
BtServiceWeight. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

In the CellMLB MO,
the sum of
IntraFreqMlbThd
and LoadOffset
must be smaller No (And no impact
In the CellMLB MO,
the sum of
InterFreqMlbThd
and LoadOffset
In the CellMLB MO,
the sum of
InterRatMlbThd
and LoadOffset
No (And no impact
on the UE in idle
In the CellMLB MO,

the sum of
InterFreqMlbThd
and LoadOffset
must be smaller
than or equal to
100.
In the CellMLB MO,
the sum of
InterRatMlbThd
and LoadOffset
must be smaller
than or equal to
100.
In the CellMLB MO,
the sum of
IntraFreqMlbThd
and LoadOffset
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In a CellMLB MO,
the sum of
InterFreqMlbUeNu
mThd and
MlbUeNumOffset No (And no impact
must be less than on the UE in idle
or equal to 10000. Read & Write mode) N/A N/A
In a CellMLB MO,
the sum of
InterFreqMlbUeNu
mThd and
MlbUeNumOffset No (And no impact
must be less than on the UE in idle
or equal to 10000. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle

In the
CellNoAccessAlm
Para MO, if
NoAccessStartDet
ectTime is different
from
NoAccessStopDet
ectTime,
NoAccessDetectTi
mer must be
smaller than the
time difference
between
NoAccessStartDet
ectTime and No (And no impact
NoAccessStopDet on the UE in idle
ectTime. Read & Write mode) N/A N/A
In the
CellNoAccessAlm
Para MO, if
NoAccessStartDet
from
NoAccessStopDet
ectTime,
NoAccessDetectTi
mer must be
smaller than the
time difference
between
NoAccessStartDet
In the
CellNoAccessAlm
Para MO, if
NoAccessStartDet
from
NoAccessStopDet
ectTime,
NoAccessDetectTi
mer must be
smaller than the
time difference
between
NoAccessStartDet
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

Less than 0.1


No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
This parameter can

be manually
configured only
when PucchSwitch
under the
PucchAlgoSwitch
parameter in the
CellAlgoSwitch MO
is set to Off.
This parameter
must be properly
set so that the
PRACH RBs are
strictly confined in
the cell bandwidth.
Otherwise, the cell
cannot be
activated.
This parameter
must be properly
set so that the
PRACH RBs and
PUCCH RBs do not
overlap in the
frequency domain.
Otherwise, the cell
cannot be Less than 0.1
activated. Read & Write Yes Cell minute
If RachAdjSwitch in
the CellAlgoSwitch
MO is turned on
and this parameter
is set to CFG, this
parameter takes
precedence over Less than 0.1
RachAdjSwitch. Read & Write Yes Cell minute
The setting of this
parameter takes
effect only if
PrachConfigIndexC
fgInd is set to CFG.
Otherwise, the
parameter setting
does not take Less than 0.1
effect. Read & Write Yes Cell minute
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

Less than 0.1
Less than 0.1
Less than 0.1
If the SrsCfgInd
parameter is set to
TRUE, the
TddSrsCfgMode
parameter must be
set.
If the SrsCfgInd
to TRUE, the
TddSrsCfgMode
parameter does not Less than 0.1

Less than 0.1
Less than 0.1


Less than 0.1
Less than 0.1

Less than 0.1

Less than 0.1
Less than 0.1

Less than 0.1
Less than 0.1
No (And no impact
on the UE in idle
Less than 0.1
No (And no impact
on the UE in idle
Less than 0.1
Less than 0.1

This parameter can
be set only if
PucchAlgoSwitch in
the CellAlgoSwitch
MO is turned off.
Otherwise, the
parameter setting
does not take
effect.
This parameter
must be properly
set so that the
PRACH RBs and
PUCCH RBs do not
overlap in the
frequency domain.
Otherwise, the cell
This parameter can

be set only if
PucchAlgoSwitch in
the CellAlgoSwitch
MO is turned off.
Otherwise, the
parameter setting
does not take
effect.
This parameter
must be properly
set so that the
PRACH RBs and
PUCCH RBs do not
overlap in the
frequency domain.
Otherwise, the cell
Less than 0.1

Mcc in an
Cdma20001XrttPre
Reg MO consists of
Mnc in an
Cdma20001XrttPre
Reg MO consists of
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
MscId in the
Cdma20001XrttPre
Reg MO must be
set to a
hexadecimal
number starting
with 0x and with a
total length not
greater than 6
digits. A
hexadecimal
number is
composed of upper-
case letters (A to F)
and digits (0 to 9).
The hexadecimal
digit following 0x
can be 0 only if the
parameter is set to
0x0. That is, the
parameter value
like 0x00AB is No (And no impact
inappropriate but on the UE in idle
0x0 is acceptable. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
If BandClassInclude
is set to CFG,
BandClass must be
set.
If BandClassInclude
BandClass does on the UE in idle
No (And no impact
on the UE in idle
If CsfbRegCfgInd is
set to CFG,
MultiSidInd must be
set.
If CsfbRegCfgInd is
MultiSidInd does on the UE in idle
If CsfbRegCfgInd is
set to CFG,
MultiNidInd must be
set.
If CsfbRegCfgInd is
MultiNidInd does on the UE in idle
If CsfbRegCfgInd is
set to CFG,
HomeRegInd must
be set.
If CsfbRegCfgInd is
HomeRegInd does on the UE in idle
If CsfbRegCfgInd is
set to CFG,
ForeignSidRegInd
must be set.
If CsfbRegCfgInd is
set to NOT_CFG,
ForeignSidRegInd No (And no impact
If CsfbRegCfgInd is
set to CFG,
ForeignNidRegInd
must be set.
If CsfbRegCfgInd is
set to NOT_CFG,
ForeignNidRegInd No (And no impact
If CsfbRegCfgInd is
set to CFG,
ParamRegInd must
be set.
If CsfbRegCfgInd is
ParamRegInd does on the UE in idle
If CsfbRegCfgInd is
set to CFG,
PowerUpRegInd
must be set.
If CsfbRegCfgInd is
set to NOT_CFG,
PowerUpRegInd No (And no impact
If CsfbRegCfgInd is
set to CFG,
RegPeriod must be
set.
If CsfbRegCfgInd is
RegPeriod does not on the UE in idle
If CsfbRegCfgInd is
set to CFG,
RegZone must be
set.
If CsfbRegCfgInd is
RegZone does not on the UE in idle
If CsfbRegCfgInd is
set to CFG,
TotalZone must be
set.
If CsfbRegCfgInd is
TotalZone does not on the UE in idle
If CsfbRegCfgInd is
set to CFG,
ZoneTimer must be
set.
If CsfbRegCfgInd is
ZoneTimer does not on the UE in idle
If CsfbRegCfgInd is
set to CFG,
PowerDownInclude
must be set.
If CsfbRegCfgInd is
set to NOT_CFG,
PowerDownInclude No (And no impact
If CsfbRegCfgInd is
set to CFG,
AcBarCfgInd must
be set. No (Modifications
If CsfbRegCfgInd is on this parameter
set to NOT_CFG, will affect cell
AcBarCfgInd does reselection of the
If AcBarCfgInd is
set to CFG,
AcBar0to9 must be
If AcBarCfgInd is on this parameter
AcBar0to9 does not reselection of the
If AcBarCfgInd is
set to CFG,
AcBar10 must be
AcBar10 does not reselection of the
If AcBarCfgInd is
set to CFG,
AcBar11 must be
If AcBarCfgInd is
set to CFG,
AcBar12 must be
If AcBarCfgInd is
set to CFG,
AcBar13 must be
If AcBarCfgInd is
set to CFG,
AcBar14 must be
If AcBarCfgInd is
set to CFG,
AcBar15 must be
If AcBarCfgInd is
set to CFG,
AcBarMsg must be
AcBarMsg does not reselection of the
If AcBarCfgInd is
set to CFG,
AcBarReg must be
AcBarReg does not reselection of the
If AcBarCfgInd is
set to CFG,
AcBarEmg must be
AcBarEmg does not reselection of the
No (And no impact
on the UE in idle
If ProtocolRevInc is
set to CFG,
ProtocolRev must
be set.
If ProtocolRevInc is
ProtocolRev does on the UE in idle
No (And no impact
on the UE in idle
None
If Read & Write mode) N/A N/A
MinProtocolRevInc
is set to CFG,
MinProtocolRev
must be set.
If
MinProtocolRevInc
is set to NOT_CFG,
MinProtocolRev No (And no impact
No (And no impact
on the UE in idle
If AuthInclude is set
to CFG, Auth must
be set.
If AuthInclude is set
to NOT_CFG, Auth No (And no impact
No (And no impact
on the UE in idle
If
MaxNumAltSoInclu
de is set to CFG,
MaxNumAltSo must
be set.
If
MaxNumAltSoInclu
de is set to
NOT_CFG, No (And no impact
MaxNumAltSo does on the UE in idle
No (And no impact
on the UE in idle
If
PrefMsIdTypeInclud
e is set to CFG,
PrefMsIdType must
be set.
If
PrefMsIdTypeInclud
e is set to
NOT_CFG, No (And no impact
PrefMsIdType does on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
If
ImsiTSupportedIncl
ude is set to CFG,
ImsiTSupported
must be set.
If
ImsiTSupportedIncl
ude is set to
NOT_CFG,
ImsiTSupported No (And no impact
No (And no impact
on the UE in idle
None
FpcFchCfgInclude
is set to CFG,
FpcFchInitSteptRc3
must be set.
If
FpcFchCfgInclude
is set to NOT_CFG,
FpcFchInitSteptRc3 No (And no impact
set.
FpcFchCfgInclude
is set to CFG,
FpcFchInitSteptRc4
must be set.
If
FpcFchCfgInclude
is set to NOT_CFG,
If
FpcFchCfgInclude
is set to CFG,
FpcFchInitSteptRc5
must be set.
If
FpcFchCfgInclude
is set to NOT_CFG,
set.
FpcFchCfgInclude
is set to CFG,
FpcFchInitSteptRc1
1 must be set.
If
FpcFchCfgInclude
is set to NOT_CFG,
1 does not need to on the UE in idle
be
If set. Read & Write mode) N/A N/A
FpcFchCfgInclude
is set to CFG,
FpcFchInitSteptRc1
2 must be set.
If
FpcFchCfgInclude
is set to NOT_CFG,
2 does not need to on the UE in idle
be set. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
If PilotIncrInclude is
set to CFG,
PilotIncr must be
set.
If PilotIncrInclude is
PilotIncr does not on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
If
GcsnaL2AckTimerI
nclude is set to
CFG,
GcsnaL2AckTimer
must be set.
If
GcsnaL2AckTimerI
nclude is set to
NOT_CFG,
GcsnaL2AckTimer No (And no impact
No (And no impact
on the UE in idle
If
GcsnaSeqContextT
Include is set to
CFG,
GcsnaSeqContextTi
mer must be set.
If
GcsnaSeqContextT
Include is set to
NOT_CFG,
GcsnaSeqContextTi No (And no impact
mer does not need on the UE in idle

SectorId104 in the
Cdma2000HrpdNC
ell MO must be set
to a hexadecimal
number starting
with 0x and with a
total length not
greater than 26
digits. A
hexadecimal
number is
composed of upper-
The hexadecimal
digit following 0x
parameter is set to
0x0. That is, the
parameter value
like 0x00AB is
inappropriate but
0x0 is acceptable. Read Only N/A N/A N/A
SectorId24 in the
Cdma2000HrpdExt
Cell MO must be
set to a
hexadecimal
number starting
with 0x and with a
total length not
greater than 6
digits. A
hexadecimal
number is
composed of upper-
The hexadecimal
digit following 0x
parameter is set to
0x0. That is, the
parameter value
like 0x00AB is
inappropriate but

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

In the
Cdma2000HrpdNc
ell MO,
LocalCellName is
a string of a
maximum of 99
characters. The
string cannot be
null characters or
contain any of the
following
characters: double
commas (,),
semicolons (;),
equal signs (=),
single quotation
signs (+), two or
more blanks, and
two or more No (And no impact
In the
Cdma2000HrpdNc
ell MO,
NeighbourCellNa
me is a string of a
maximum of 99
characters. The
string cannot be
null characters or
contain any of the
following
characters:double
commas (,),
semicolons (;),
equal signs (=),
single quotation
signs (+), two or
more blanks, and
No (And no impact
on the UE in idle

Mcc in an
Cdma2000HrpdPre
Reg MO consists of
Mnc in an
Cdma2000HrpdPre
Reg MO consists of
No (Modifications
on this parameter
will affect cell
reselection of the
No (Modifications
on this parameter
will affect cell
reselection of the
If
McPreRegParaCfgI
nd is set to CFG,
McPreRegistrationA
llowed must be set.
If
McPreRegParaCfgI
McPreRegistrationA will affect cell
llowed does not reselection of the
No (For the UE in
idle mode,
modifications on
this parameter
would affect cell
None Read & Write reselection.) N/A N/A
No (Modifications
on this parameter
will affect cell
reselection of the
If
SecondaryPreRegZ
oneId0Ind is set to
CFG,
SecondaryPreRegZ
oneId0 must be set.
If
SecondaryPreRegZ No (For the UE in
oneId0Ind is set to idle mode,
NOT_CFG, modifications on
SecondaryPreRegZ this parameter
oneId0 does not would affect cell
need to be set. Read & Write reselection.) N/A N/A
If
SecondaryPreRegZ
oneId0Ind is set to
CFG,
SecondaryPreRegZ
oneId1Ind must be
set.
If
SecondaryPreRegZ
oneId0Ind is set to No (Modifications
SecondaryPreRegZ will affect cell
oneId1Ind does not reselection of the
If
SecondaryPreRegZ
oneId1Ind is set to
CFG,
SecondaryPreRegZ
oneId1 must be set.
If
SecondaryPreRegZ No (For the UE in
oneId1Ind is set to idle mode,
NOT_CFG, modifications on
SecondaryPreRegZ this parameter
oneId1 does not would affect cell
need to be set. Read & Write reselection.) N/A N/A

Mcc in an
Cdma2000HrpdRef
Cell MO consists of
Mnc in an
Cdma2000HrpdRef
Cell MO consists of
SectorId104 in the
Cdma2000HrpdNC
ell MO must be set
to a hexadecimal
number starting
with 0x and with a
total length not
greater than 26
digits. A
hexadecimal
number is
composed of upper-
The hexadecimal
digit following 0x
parameter is set to
0x0. That is, the
parameter value
like 0x00AB is
inappropriate but
SectorId24 in the
Cdma2000HrpdExt
Cell MO must be
set to a
hexadecimal
number starting
with 0x and with a
total length not
greater than 6
digits. A
hexadecimal
number is
composed of upper-
The hexadecimal
digit following 0x
parameter is set to
0x0. That is, the
parameter value
like 0x00AB is
inappropriate but
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
If
SearchWindowSize
CfgInd is set to
CFG,
SearchWindowSize
must be set.
If
SearchWindowSize
CfgInd is set to
NOT_CFG,
SearchWindowSize No (And no impact
No (And no impact
on the UE in idle
Mcc in an
EutranExternalCell
Plmn MO consists
of digits only.
In an
EutranExternalCell
Plmn MO, the
combination of Mnc
and Mcc must be
different from that of
ShareMnc and
ShareMcc. Read Only N/A N/A N/A
In an
EutranExternalCell
Plmn MO, the
combination of Mnc
and Mcc must be
ShareMnc and
ShareMcc.
Mnc in an
EutranExternalCell
Plmn MO consists
of digits only. Read Only N/A N/A N/A

In an
EutranExternalCell
Plmn MO, the
combination of Mnc
and Mcc must be
ShareMnc and
ShareMcc.
ShareMcc in an
EutranExternalCell
Plmn MO consists
In an
EutranExternalCell
Plmn MO, the
combination of Mnc
and Mcc must be
ShareMnc and
ShareMcc.
ShareMnc in an
EutranExternalCell
Plmn MO consists
In a
GeranExternalCell
Plmn MO, the
combination of Mnc
and Mcc must be
ShareMnc and
ShareMcc.
Mcc in a
GeranExternalCell
Plmn MO consists
In a
GeranExternalCell
Plmn MO, the
combination of Mnc
and Mcc must be
ShareMnc and
ShareMcc.
Mnc in a
GeranExternalCell
Plmn MO consists
In a
GeranExternalCell
Plmn MO, the
combination of Mnc
and Mcc must be
ShareMnc and
ShareMcc.
ShareMcc in a
GeranExternalCell
Plmn MO consists
In a
GeranExternalCell
Plmn MO, the
combination of Mnc
and Mcc must be
ShareMnc and
ShareMcc.
ShareMnc in a
GeranExternalCell
Plmn MO consists
Mcc in a
UtranExternalCell
Plmn MO consists
of digits only.
In a
UtranExternalCell
Plmn MO, the
combination of Mnc
and Mcc must be
ShareMnc and
ShareMcc. Read Only N/A N/A N/A
In a
UtranExternalCell
Plmn MO, the
combination of Mnc
and Mcc must be
ShareMnc and
ShareMcc.
Mnc in a
UtranExternalCell
Plmn MO consists

In a
UtranExternalCell
Plmn MO, the
combination of Mnc
and Mcc must be
ShareMnc and
ShareMcc.
ShareMcc in a
UtranExternalCell
Plmn MO consists
In a
UtranExternalCell
Plmn MO, the
combination of Mnc
and Mcc must be
ShareMnc and
ShareMcc.
ShareMnc in a
UtranExternalCell
Plmn MO consists
SectorId104 in the
Cdma2000HrpdExt
Cell MO must be
set to a
hexadecimal
number starting
with 0x and with a
total length not
greater than 26
digits. A
hexadecimal
number is
composed of upper-
The hexadecimal
digit following 0x
parameter is set to
0x0. That is, the
parameter value
like 0x00AB is
inappropriate but
SectorId24 in the
Cdma2000HrpdExt
Cell MO must be
set to a
hexadecimal
number starting
with 0x and with a
total length not
greater than 6
digits. A
hexadecimal
number is
composed of upper-
The hexadecimal
digit following 0x
parameter is set to
0x0. That is, the
parameter value
like 0x00AB is
inappropriate but

Mcc in an
Cdma2000HrpdExt No (And no impact
Cell MO consists of on the UE in idle
digits only. Read & Write mode) N/A N/A
Mnc in an
Cdma2000HrpdExt No (And no impact
No (And no impact
on the UE in idle
In the
Cdma2000Externa
lCell MO,
CellName is a
string of a
maximum of 99
characters. The
string cannot be
null characters or
contain any of the
following
characters:double
commas (,),
semicolons (;),
equal signs (=),
single quotation
signs (+), two or
more blanks, and
No (And no impact
on the UE in idle


Mcc in an
Cdma20001XrttExt No (And no impact
Mnc in an
Cdma20001XrttExt No (And no impact
MscId in the
Cdma20001XrttExt
Cell MO must be
set to a
hexadecimal
number starting
with 0x and with a
total length not
greater than 6
digits. A
hexadecimal
number is
composed of upper-
The hexadecimal
digit following 0x
parameter is set to
0x0. That is, the
parameter value
like 0x00AB is No (And no impact
inappropriate but on the UE in idle
0x0 is acceptable. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In the
Cdma20001XrttNC
ell MO,
LocalCellName is
a string of a
maximum of 99
characters. The
string cannot be
null characters or
contain any of the
following
characters: double
commas (,),
semicolons (;),
equal signs (=),
single quotation
signs (+), two or
more blanks, and
In the
Cdma20001XRTTN
cell MO,
NeighbourCellNa
me is a string of a
maximum of 99
characters. The
string cannot be
null characters or
contain any of the
following
characters:double
commas (,),
semicolons (;),
equal signs (=),
single quotation
signs (+), two or
more blanks, and
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
If
Cdma20001XrttCell
ReselInd is set to
CFG,
Cdma20001XrttCell
ReselPri must be
set.
If
Cdma20001XrttCell
ReselInd is set to
NOT_CFG,
Cdma20001XrttCell No (And no impact
ReselPri does not on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
If
Cdma2000HrpdCell
ReselInd is set to
CFG,
Cdma2000HrpdCell
ReselPri must be
set.
If
Cdma2000HrpdCell
ReselInd is set to
NOT_CFG,
Cdma2000HrpdCell No (And no impact
ReselPri does not on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
Mcc in a
GeranExternalCell
MO consists of
Mnc in a
GeranExternalCell
MO consists of
No (And no impact
on the UE in idle
If RacCfgInd is set
to CFG, this
parameter must be
set.
If RacCfgInd is set
to NOT_CFG, this No (And no impact
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In the
GeranExternalCell
MO, the value of
CellName is a
string of a
maximum of 99
characters. The
null characters or
contain any of the
following
characters:double
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive
blanks, and two or
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

Mcc in a
GeranNcell MO
consists of digits
only. Read Only N/A N/A N/A
Mnc in a
GeranNcell MO
consists of digits

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

In the GeranNcell
MO, the value of
LocalCellName is
a string of a
maximum of 99
characters. The
null characters or
contain any of the
following
characters:double
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive
blanks, and two or
In the GeranNcell
MO, the value of
NeighbourCellNa
me is a string of a
maximum of 99
characters. The
null characters or
contain any of the
following
characters:double
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive
blanks, and two or
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
If
CellReselPriorityCfg
Ind is set to CFG,
CellReselPriority
must be set.
If
Ind is set to
NOT_CFG,
CellReselPriority No (And no impact
No (And no impact
on the UE in idle
If
PmaxGeranCfgInd
is set to CFG,
PmaxGeran must
be set.
If
PmaxGeranCfgInd
PmaxGeran does on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

The sum of the

value of
PhyCellIdRange(n
1 is 1, n4 is 4, n8 is
8,and so on) and
the value of
PhyCellId must be
smaller than 504 in
the
IntraFreqBlkCell
No (And no impact
on the UE in idle
The sum of the
value of
PhyCellIdRange(n
1 is 1, n4 is 4, n8 is
8,and so on) and
the value of
PhyCellId must be
smaller than 504 in
the No (And no impact
IntraFreqBlkCell on the UE in idle
Mcc in an
EutranIntraFreqNC
ell MO consists of
Mnc in an
EutranIntraFreqNC
ell MO consists of

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

In the
EutranIntraFreqNC
ell MO, the value of
LocalCellName is
a string of a
maximum of 99
characters. The
null characters or
contain any of the
following
characters:double
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive
blanks, and two or
In the
EutranIntraFreqNC
NeighbourCellNa
me is a string of a
maximum of 99
characters. The
null characters or
contain any of the
following
characters: double
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive
blanks, and two or
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

DlEarfcn in an
EutranInterNFreq
MO must be a valid
frequency. Read Only N/A N/A N/A
No (And no impact
on the UE in idle
UlEarfcn in an
EutranInterNFreq
MO must be a valid
frequency.
If UlEarfcnCfgInd
is set to CFG,
UlEarfcn must be
set.
If UlEarfcnCfgInd
UlEarfcn does not on the UE in idle
No (Modifications
on this parameter
would affect cell
reselection of the
If
Ind is set to CFG,
CellReselPriority
must be set.
If
CellReselPriority will affect cell
No (And no impact
on the UE in idle
No (Modifications
on this parameter
would affect cell
reselection of the
If
SpeedDependSPCf
gInd is set to CFG,
TReselEutranSfMe
dium must be set.
If
SpeedDependSPCf
TReselEutranSfMe would affect cell
dium does not need reselection of the
If
SpeedDependSPCf
gInd is set to CFG,
TReselEutranSfHig
h must be set.
If
SpeedDependSPCf
TReselEutranSfHig would affect cell
h does not need to reselection of the
No (Modifications
on this parameter
would affect cell
reselection of the
No (Modifications
on this parameter
would affect cell
reselection of the
No (Modifications
on this parameter
would affect cell
reselection of the
No (Modifications
on this parameter
would affect cell
reselection of the
A larger value of
this parameter
leads to a lower
probability of a cell
meeting criteria S
and becoming a
suitable cell for cell
selection. A smaller
value of this
parameter leads to
a higher probability.
Set this parameter
properly so that the
selected cell can No (Modifications
provide signals that on this parameter
meet the quality would affect cell
requirement of reselection of the
basic services. Read & Write UE in idle mode.) N/A N/A
No (Modifications
on this parameter
would affect cell
reselection of the
If PmaxCfgInd is
set to CFG, Pmax
must be set. No (Modifications
If PmaxCfgInd is on this parameter
set to NOT_CFG, would affect cell
Pmax does not reselection of the
No (And no impact
on the UE in idle
No (Modifications
on this parameter
would affect cell
reselection of the
No (And no impact
on the UE in idle
No (Modifications
on this parameter
would affect cell
reselection of the
No (Modifications
on this parameter
would affect cell
reselection of the
No (Modifications
on this parameter
would affect cell
reselection of the
If QqualMinCfgInd
is set to CFG, this
parameter must be
If QqualMinCfgInd on this parameter
this parameter does reselection of the
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

DlEarfcn in an
InterFreqBlkCell
MO must be a valid
frequency. Read Only N/A N/A N/A
The sum of the

value of
PhyCellIdRange(n
1 is 1, n4 is 4, n8 is
8,and so on) and
the value of
PhyCellId must be
smaller than 504 in
the
InterFreqBlkCell
No (And no impact
on the UE in idle
The sum of the

value of
PhyCellIdRange(n
1 is 1, n4 is 4, n8 is
8,and so on) and
the value of
PhyCellId must be
smaller than 504 in
the No (And no impact
InterFreqBlkCell on the UE in idle
Mcc in an
EutranInterFreqNC
ell MO consists of
Mnc in an
EutranInterFreqNC
ell MO consists of

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

In the
EutranInterFreqNC
LocalCellName is
a string of a
maximum of 99
characters. The
null characters or
contain any of the
following
characters:double
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive
blanks, and two or
In the
EutranInterFreqNC
NeighbourCellNa
me is a string of a
maximum of 99
characters. The
null characters or
contain any of the
following
characters:double
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive
blanks, and two or
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
Mcc in an
EutranExternalCell
MO consists of
Mnc in an
EutranExternalCell
MO consists of

DlEarfcn in an
EutranExternalCell
MO must be a valid
frequency.
In an
EutranExternalCell
MO, if DlEarfcn is
set to a value less
than 36000, No (And no impact
No (And no impact
on the UE in idle
UlEarfcn in an
EutranExternalCell
MO must be a valid
frequency.
If UlEarfcnCfgInd
is set to CFG,
UlEarfcn must be
set.
If UlEarfcnCfgInd
UlEarfcn does not on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In the
EutranExternalCell
MO, the value of
CellName is a
string of a
maximum of 99
characters. The
null characters or
contain any of the
following
characters:double
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive
blanks, and two or
In an
EutranExternalCell
MO, if DlEarfcn is
set to a value less
than 36000, No (And no impact

No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
This parameter is
optional, depending
Cdma1XrttCellRese on the UE in idle
lPriInd. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
This parameter is
optional, depending
HrpdCellReselDedi on the UE in idle
PriCfgInd. Read & Write mode) N/A N/A


No (And no impact
on the UE in idle
This parameter is
optional, depending
CellReselPriorityCfg on the UE in idle
Ind. Read & Write mode) N/A N/A

No (And no impact
on the UE in idle
This parameter is
optional, depending
CellReselDediPriCf on the UE in idle
gInd. Read & Write mode) N/A N/A

No (And no impact
on the UE in idle
This parameter is
optional, depending


No (And no impact
on the UE in idle
This parameter is
optional, depending

Mcc in a
UtranNCell MO
consists of digits
Mnc in a
UtranNCell MO
consists of digits

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In the UtranNCell
MO, the value of
LocalCellName is
a string of a
maximum of 99
characters. The
null characters or
contain any of the
following
characters:double
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive
blanks, and two or
In the UtranNCell
MO, the value of
NeighbourCellNa
me is a string of a
maximum of 99
characters. The
null characters or
contain any of the
following
characters:double
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive
blanks, and two or
No (And no impact
on the UE in idle


No (And no impact
on the UE in idle
This parameter is
optional, depending

No (And no impact
on the UE in idle
This parameter is
optional, depending

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
1. If
UtranUlArfcnCfgInd
is set to CFG,
UtranUlArfcn must
be set. If
UtranUlArfcnCfgInd
is set to NOT_CFG,
UtranUlArfcn does
not need to be set.
2. The DL UARFCN
and UL UARFCN
must be in the No (And no impact
same frequency on the UE in idle
band. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
If
Ind is set to CFG,
CellReselPriority
must be set.
If
Ind is set to
NOT_CFG,
CellReselPriority No (And no impact
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
Qqualmin must be
set if
UtranFddTddType No (And no impact
UTRAN_FDD. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
ThreshXHighQ
must be set if
ThreshXLowQ must
be set if
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
Mcc in a
UtranExternalCell
MO consists of
Mnc in a
UtranExternalCell
MO consists of

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
When
UtranUlArfcnCfgInd
is set to CFG,
UtranUlArfcn must
be set.
If
UtranUlArfcnCfgInd
is set to NOT_CFG,
UtranUlArfcn does No (And no impact
not need to be on the UE in idle
configured. Read & Write mode) N/A N/A
In a
UtranExternalCell
MO,
PScrambCode
cannot exceed 127
if
UtranFddTddType
is set to
UTRAN_TDD.
In a
UtranExternalCell
MO, if
UtranFddTddType
is set to
UTRAN_TDD, No (And no impact
No (And no impact
on the UE in idle
If RacCfgInd is set
to CFG, this
parameter must be
set.
If RacCfgInd is set
to NOT_CFG, this No (And no impact
In a
UtranExternalCell
MO,
PScrambCode
cannot exceed 127
if
UTRAN_TDD. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
In the
UtranExternalCell
MO, the value of
CellName is a
string of a
maximum of 99
characters. The
null characters or
contain any of the
following
characters:double
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive
blanks, and two or
No (And no impact
on the UE in idle
In a
UtranExternalCell
MO, if
UtranFddTddType
is set to
UTRAN_TDD, No (And no impact

No (And no impact
on the UE in idle
In the ANR MO,
AddCellThd must
equal to on the UE in idle
DelCellThd. Read & Write mode) N/A N/A
In the ANR MO,
AddCellThd must
equal to on the UE in idle
DelCellThd. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
None Read & Write Yes Cell Less than 1 minute

The parameter is
used only when the
PROTOCOL No (And no impact
TDL_IR. Read & Write mode) N/A N/A




No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
In the
eNBLicenseAlmTh
d MO, RTHD must No (And no impact
equal to OTHD. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
In the
eNBLicenseAlmTh
d MO, RTHD must No (And no impact
equal to OTHD. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
Cells with
customized
bandwidths support
only static ICIC.
The
DlIcicDynamicSwitc
h_ON_ENUM and
DlIcicReuse3Switch
_ON_ENUM values No (And no impact
do not take effect on the UE in idle
for these cells. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
Less than 0.1
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
If
AutoPowerOffSwitc
h is set to ON,
services are
interrupted from
PowerOffTime to
None Read & Write Yes eNodeB PowerOnTime.
In the
eNodeBAutoPowe
rOff MO,
PowerOffTime
must be set to a
time in the range of
22:00:00 to
05:00:00 of the next
day.
In the
eNodeBAutoPowe
rOff MO, the value
of PowerOnTime
must be one hour
later than that of
PowerOffTime.
If
AutoPowerOffSwit
ch is set to ON,
PowerOffTime
must be set. If
If AutoPowerOffSwitc
AutoPowerOffSwit h is set to ON,
ch is set to OFF, services are
PowerOffTime interrupted from
does not need to be PowerOffTime to
set. Read & Write Yes eNodeB PowerOnTime.
In the
eNodeBAutoPowe
rOff MO,
PowerOnTime
must be set to a
time in the range of
23:00:00 to
06:00:00 of the next
day.
In the
eNodeBAutoPowe
rOff MO, the value
of PowerOnTime
must be one hour
later than that of
PowerOffTime.
If
AutoPowerOffSwit
ch is set to ON,
PowerOnTime
must be set. If
If AutoPowerOffSwitc
AutoPowerOffSwit h is set to ON,
ch is set to OFF, services are
PowerOnTime interrupted from
does not need to be PowerOffTime to
set. Read & Write Yes eNodeB PowerOnTime.

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

The sum of
TrfRatio in all
LicRatioSharePoli
cy MOs cannot
exceed 100.
In the
LicRatioSharePoli
cy MO,
TrfSharingRatio No (And no impact
cannot exceed on the UE in idle
TrfRatio. Read & Write mode) N/A N/A
In the
LicRatioSharePoli
cy MO,
TrfSharingRatio No (And no impact
cannot exceed on the UE in idle
TrfRatio. Read & Write mode) N/A N/A
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle

No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
Less than 0.1
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
No (And no impact
on the UE in idle
Impact on Radio
Validation of Network Introduced in
Caution Modification Performance Version... Attribute
A larger value of
this parameter
makes ECHO frame
timeout less
vulnerable to
network delay, but it
leads to a longer
time required to
detect
disconnection and
therefore a higher
probability of long-
time packet loss. A
of detecting
network status, but
it leads to higher
sensitivity to packet
The parameter loss and delay and
modification has no therefore a higher
impact on the probability of
None equipment. incorrect decisions. V100R001C01 Transport
A larger value of
this parameter
makes ECHO frame
timeout less
vulnerable to
network delay, but it
leads to a longer
time required to
detect
disconnection and
therefore a higher
probability of long-
time packet loss. A
of detecting
network status, but
it leads to higher
sensitivity to packet
The parameter loss and delay and
modification has no therefore a higher
impact on the probability of
None equipment. incorrect decisions. V100R001C01 Transport
The parameter
modification has no
impact on the
None equipment. None V100R001C01 Transport
The parameter
modification has no
impact on the
N/A N/A None V100R003C00 Transport
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the

The parameter
modification has no
impact on the





The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
None N/A None V100R008C00 Transport

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the


The parameter
modification has no
impact on the
The parameter
modification has no
impact on the


The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the


The parameter
modification has no
impact on the
The parameter
modification has no
impact on the


The parameter
modification has no
impact on the
The parameter
modification has no
impact on the


The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the


The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the


The parameter
modification has no
impact on the
The parameter
modification has no
impact on the








The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the



The parameter
modification has no
impact on the

When the DHCP

relay switch is
enabled, the BS
automatically
forwards the DHCP
requests from the
The parameter lower-level BS,
modification has no which increases the
impact on the load of data
None equipment. processing. V100R001C00 Transport

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
A smaller parameter
value indicates a
The parameter lower transmission
modification has no priority of signaling
impact on the data and affects the
None equipment. QoS. V100R001C00 Transport
A smaller parameter
value indicates a
lower transmission
The parameter priority of high-level
modification has no OM service data
impact on the and affects the
This parameter
value must be
different from the
priorities of other
services, so that
low-level OM
service data (such
as upload and
The parameter download data) is
modification has no allocated the
impact on the minimal bandwidth
None equipment. through scheduling. V100R001C00 Transport
A smaller value of
this parameter
indicates a lower
priority of IPCLK
The parameter packets, which
modification has no affects their
impact on the transmission
None equipment. quality. V100R008C00 Transport

The parameter
modification has no
impact on the


The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The board should

be reset to validate
the parameter
None modification. None V100R001C00 Transport
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the




The parameter
modification has no
impact on the


The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the

The parameter
modification has no
impact on the

The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the






The parameter
modification has no
impact on the
An excessive large
parameter value
leads to packet loss
or excessively
fragmented data
packets on the
transport network,
resulting in a long
delay and
deteriorated
performance. An
excessive small
parameter value
leads to reduced
available payloads
for transmission,
resulting in
decreased transport
The parameter bandwidth
modification has no efficiency and
impact on the deteriorated
None equipment. performance. V100R001C00 Transport
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the


The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

An excessive large
parameter value
leads to packet loss
or excessively-
fragmented data
packets on the
transport network,
resulting in a long
delay and
deteriorated
performance. An
excessive small
parameter value
leads to decreased
available payloads
for transmission,
resulting in
ineffective use of
The parameter the transport
modification has no network bandwidth
impact on the and deteriorated
None equipment. performance. V100R001C01 Transport





The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

Modifications to this
admission of new
The parameter services and the
modification has no quality of admitted
impact on the services carried on
None equipment. resource groups. V100R003C00 Transport
Modifications to this
admission of new
The parameter services and the
modification has no quality of admitted
impact on the services carried on
None equipment. resource groups. V100R003C00 Transport
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the




The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The setting of this

parameter must be
consistent with that
at the peer NE. The parameter
Modifications on modification has no
this parameter are impact on the
not allowed. equipment. None V100R001C00 Transport
This parameter The parameter

must be set to the modification has no
same value as that impact on the
at the peer NE. equipment. None V100R001C00 Transport
The value of this The parameter

parameter must be modification has no
the same as that at impact on the
the peer NE. equipment. None V100R001C00 Transport
This parameter
value must be the
same as the peer IP
address.
Modifications on The parameter
this parameter modification has no
value are not impact on the
allowed. equipment. None V100R001C00 Transport
The
REMOTENAME
value of the IKE
peer is case
insensitive and
cannot contain any
non-ASCII
characters. The
local end and peer The parameter
end must have the modification has no
same setting of this impact on the
parameter. equipment. None V100R001C00 Transport

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The setting of this

parameter must be
consistent with that
at the peer NE. The parameter

This parameter
must be the same
as the peer IP
address. The parameter
The
REMOTENAME
value of the IKE
peer is case
insensitive and
cannot contain any
non-ASCII
characters. The
local end and peer The parameter
end must have the modification has no
same setting of this impact on the
parameter. equipment. None V100R005C00 Transport

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the



The parameter
modification has no
impact on the





The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the




The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
set to DISABLE, the The parameter
connectivity of an IP modification has no
path cannot be impact on the
checked. equipment. None V100R001C00 Transport
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the


set to DISABLE, the The parameter
continuity of the modification has no
IPv6 path cannot be impact on the
checked. equipment. None V100R002C00 Transport

The parameter
modification has no
impact on the






The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the


The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the




The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the









The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the


set to ENABLE, the
rate of a physical
port is restricted. If
this parameter is
set to DISABLE, the
rate of a physical
port is not
restricted.Rate
restriction of
physical ports is
necessary if the
bandwidth of a
transport network is
limited. The
transport network
may incur
congestion or
packet loss when
The parameter its bandwidth is
modification has no limited and rate
impact on the restriction is
None equipment. disabled. V100R001C00 Transport
If this parameter
value is greater
than the available
transport
bandwidth, the
transport network
may be congested,
affecting the QoS.
If this parameter
value is smaller
than the available
transport
bandwidth, the
transport network
may incur a waste
of bandwidth,
The parameter affecting the
modification has no number of admitted
impact on the services and
None equipment. throughput. V100R001C00 Transport
A smaller parameter
value indicates a
lower tolerance for
data burst, which
results in packet
loss.
A larger parameter
value indicates
higher consumption
The parameter of system
modification has no resources, which
impact on the results in a waste of
None equipment. resources. V100R001C00 Transport
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
Enabling the Point-

to-Point Protocol
(PPP) multiplexing
function leads to
The parameter higher bandwidth
modification has no usage and a longer
impact on the delay for data
None equipment. transmission. V100R001C00 Transport
The parameter
modification has no
impact on the
A smaller parameter
value indicates a
smaller number of
frames available for
multiplexing,
resulting in a lower
multiplexing ratio.
A larger parameter
value indicates a
larger number of
multiplexing but a
The parameter lower multiplexing
modification has no ratio, resulting in
impact on the inadequate
None equipment. multiplexing. V100R001C00 Transport
A larger parameter
value indicates a
larger number of
multiplexed frames
and a higher
multiplexing
efficiency, resulting
in a longer delay
caused by
multiplexing.
A smaller parameter
value indicates a
smaller number of
multiplexed frames,
The parameter resulting in a
modification has no shorter delay
impact on the caused by
A smaller parameter
value indicates a
smaller number of
multiplexed frames
and lower
bandwidth usage,
resulting in a short
delay.
A larger parameter
value indicates a
large number of
multiplexed frames
if the maximum
multiplexed frame
length is not
considered. In this
The parameter case, the bandwidth
modification has no usage is higher,
impact on the resulting in a longer
None equipment. delay. V100R001C00 Transport
The parameter
modification has no
impact on the
is set to ENABLE,
the IP header
compression is
enabled, which
improves bandwidth
usage, increases
The parameter data processing
modification has no loads, and
impact on the decreases the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the





A smaller parameter
value indicates
smaller received
data units and more
data fragments,
N/A N/A affecting the QoS. V100R001C00 Transport
After the Protocol

Field Compression
(PFC) function is
enabled, the
bandwidth usage is
improved, which
results in higher
system loads and a
N/A N/A longer delay. V100R001C00 Transport
After the Address

and Control Field
Compression
(ACFC) function is
enabled, the
bandwidth usage is
improved, which
results in higher
system loads and a
N/A N/A longer delay. V100R001C00 Transport



The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the

The parameter
modification has no
impact on the

The parameter
modification has no
impact on the





The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the


The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
If a BS connects to
an upper level
node, the peer IP
address of the BS
is the IP address of
the upper level
node. If a BS
connects to lower
level nodes in
cascaded mode, The parameter
the peer IP address modification has no
of the BS must be impact on the
specified. equipment. None V100R001C00 Transport
Enabling the Point-
to-Point Protocol
(PPP) multiplexing
function leads to
The parameter higher bandwidth
modification has no usage and a longer
impact on the delay for data
None equipment. transmission. V100R001C00 Transport
A smaller parameter
value indicates a
smaller number of
multiplexing,
resulting in a lower
multiplexing ratio.
A larger parameter
value indicates a
larger number of
multiplexing but a
lower multiplexing
The parameter ratio, resulting in a
modification has no low impact of the
impact on the multiplexing
None equipment. algorithm. V100R001C00 Transport
A larger parameter
value indicates a
larger number of
multiplexed frames
and a higher
multiplexing
efficiency, resulting
in a longer delay
caused by
multiplexing.
A smaller parameter
value indicates a
smaller number of
multiplexed frames,
The parameter resulting in a
modification has no shorter delay
impact on the caused by
A smaller parameter
value indicates a
smaller number of
multiplexed frames
and lower
bandwidth usage,
resulting in a short
delay.
A larger parameter
value indicates a
large number of
multiplexed frames
if the maximum
multiplexed frame
length is not
considered. In this
The parameter case, the bandwidth
modification has no usage is higher,
impact on the resulting in a longer
None equipment. delay. V100R001C00 Transport

is set to ENABLE,
the IP header
compression is
performed, resulting
The parameter in higher bandwidth
modification has no usage and line
impact on the quality
None equipment. requirements. V100R001C00 Transport
The parameter
modification has no
impact on the
A smaller parameter
value indicates
The parameter smaller received
modification has no data units and more
impact on the data fragments,
None equipment. affecting the QoS. V100R001C00 Transport
The parameter
modification has no
impact on the
After the Address
and Control Field
Compression
(ACFC) function is
enabled, the
bandwidth usage is
The parameter improved, which
modification has no results in higher
impact on the system loads and a
None equipment. longer delay. V100R001C00 Transport
The parameter
modification has no
impact on the


The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
A lower priority of
the real-time
service queue leads
to the preemption of
non-real-time
services by
excessive real-time-
services. A higher
priority of real-time
service queue leads
to degrading of
real-time services to
the non-real-time
service queue,
resulting in the
The parameter preemption of real-
modification has no time services by
impact on the non-real-time
None equipment. services. V100R001C00 Transport
A lower priority of
the real-time
service queue leads
non-real-time
services by
services. A higher
service queue leads
to degrading of
the non-real-time
service queue,
resulting in the
A lower priority of
the real-time
service queue leads
non-real-time
services by
services. A higher
service queue leads
to degrading of
the non-real-time
service queue,
resulting in the
A lower priority of
the real-time
service queue leads
non-real-time
services by
services. A higher
service queue leads
to degrading of
the non-real-time
service queue,
resulting in the
A lower priority of
the real-time
service queue leads
non-real-time
services by
services. A higher
service queue leads
to degrading of
the non-real-time
service queue,
resulting in the
A lower priority of
the real-time
service queue leads
non-real-time
services by
services. A higher
service queue leads
to degrading of
the non-real-time
service queue,
resulting in the
A lower priority of
the real-time
service queue leads
non-real-time
services by
services. A higher
service queue leads
to degrading of
the non-real-time
service queue,
resulting in the

The parameter
modification has no
impact on the
If this parameter
value is greater
than the available
transport
bandwidth, the
transport network
may be congested,
affecting the QoS.
If this parameter
value is smaller
than the available
transport
bandwidth, the
transport network
may incur a waste
of bandwidth,
The parameter affecting the
impact on the services and
If this parameter
value is greater
than the available
transport
bandwidth, the
number of
admission services
increases, affecting
the QoS.
If this parameter
value is smaller
than the available
transport
bandwidth, the
transport network
may incur a waste
The parameter of bandwidth,
modification has no decreasing the
impact on the number of admitted
A smaller parameter
value indicates a
lower tolerance for
data burst, which
results in packet
loss.
A larger parameter
value indicates
higher consumption
The parameter of system
modification has no resources, which
impact on the results in a waste of
None equipment. resources. V100R003C00 Transport
The parameter
modification has no
impact on the
A smaller value of
this parameter
brings a higher
precision of traffic
adjustment and
smaller service rate
fluctuation.
A greater value of
this parameter
brings a lower
The parameter precision of traffic
modification has no adjustment and
impact on the larger service rate
None equipment. fluctuation. V100R003C00 Transport
If this parameter
value is greater
than the
guaranteed
transport bandwidth
for uplink, packet
loss is easy to
occur on non-flow-
control services,
affecting the QoS of
these services.
If this parameter
value is smaller
than the
guaranteed
transport bandwidth
for uplink,
bandwidth waste
may occur on the
transport network,
affecting the
number of admitted
The parameter non-flow-control
modification has no services and the BS
impact on the throughput in the
None equipment. uplink. V100R003C00 Transport
If this parameter
value is greater
than the available
transport
bandwidth, the
number of non-flow-
control admission
services increases,
affecting the QoS.
If this parameter
value is smaller
than the available
transport
bandwidth, the
transport network
may incur a waste
of bandwidth,
The parameter decreasing the
impact on the non-flow-control
If this parameter
value is greater
than the maximum
transport bandwidth
for uplink, packet
loss is easy to
occur on the
transport network,
affecting the QoS of
services.
If this parameter
value is smaller
than the maximum
transport bandwidth
for uplink,
bandwidth waste
may occur on the
transport network,
affecting the
The parameter number of admitted
modification has no services and the BS
impact on the throughput in the
None equipment. uplink. V100R003C00 Transport
If this parameter
value is greater
than the available
transport
bandwidth, the
number of
admission services
increases, affecting
the QoS.
If this parameter
value is smaller
than the available
transport
bandwidth, the
transport network
may incur a waste
The parameter of bandwidth,
modification has no decreasing the
impact on the number of admitted
A larger parameter
The parameter value indicates a
modification has no greater amount of
impact on the permitted burst
None equipment. data. V100R003C00 Transport





The parameter
modification has no
impact on the
set to ON, packet
loss can be
reduced by
adjusting the TX
bandwidth of the
transport network.
set to OFF, the
bandwidth and TX
The parameter rate is not adjusted
modification has no due to packet loss
impact on the on the transport
None equipment. network. V100R001C00 Transport
set to ON, packet
loss is reduced by
adjusting the RX
bandwidth of the
transport network.
set to OFF, the
bandwidth and RX
The parameter rate is not adjusted
modification has no due to packet loss
impact on the on the transport
A smaller parameter
value indicates a
higher probability of
detecting
congestion on the
transport network
and being affected
by packet loss due
to transport network
errors, which leads
to a mistaken rate
decrease.
A larger parameter
value indicates a
lower probability of
detecting
congestion on the
transport network
The parameter and being affected
modification has no by packet loss due
impact on the to transport network
None equipment. errors. V100R001C00 Transport
A smaller parameter
value indicates a
detecting
congestion on the
transport network
and being affected
by delay jitter when
the transport
network is not
congested, which
may lead to a
mistaken rate
decrease.
A larger parameter
value indicates a
detecting
congestion on the
transport network
and being affected
The parameter by delay jitter when
modification has no the transport
impact on the network is not
None equipment. congested. V100R001C00 Transport
The minimum TX
bandwidth that the
adjustment can
achieve has a
with the value of
this parameter. That
is, if this parameter
is set to a smaller
value, the minimum
TX bandwidth that
the adjustment can
achieve is smaller;
set to a larger
The parameter value, the minimum
modification has no TX bandwidth that
impact on the the adjustment can
None equipment. achieve is larger. V100R004C00 Transport
The minimum RX
bandwidth that the
adjustment can
achieve has a
with the value of
this parameter. That
is, if this parameter
is set to a smaller
value, the minimum
RX bandwidth that
the adjustment can
achieve is smaller;
set to a larger
The parameter value, the minimum
modification has no RX bandwidth that
impact on the the adjustment can
None equipment. achieve is larger. V100R001C00 Transport
set to ENABLE, the
transport resource
group will not be
congested,
guaranteeing the
fairness and
differentiation of
non-real-time
services.
set to DISABLE, the
transport resource
group may be
congested,
affecting the
The parameter fairness and
modification has no differentiation of
set to ENABLE, the
OM FTP services
may preempt the
bandwidth of non-
real-time services.
set to DISABLE,
The parameter only a low
modification has no bandwidth is
impact on the guaranteed for OM
None equipment. FTP services. V100R001C00 Transport
All real-time
services belong to
the Priority Queuing
(PQ) queue.
Otherwise, the high
The parameter priority of
modification has no transmitting real-
impact on the time services is not
None equipment. guaranteed. V100R001C00 Transport
A smaller parameter
value indicates a
the TX rate change
of the transport
resource group but
a shorter delay.
A larger parameter
value indicates a
The parameter the TX rate change
modification has no of the transport
impact on the resource group but
None equipment. a longer delay. V100R001C00 Transport
A smaller parameter
value indicates a
better differentiation
effect for bandwidth
allocation of non-
real-time services.
This, however,
leads to a higher
probability of
emptying the buffer
of the transport
resource group and
affects the
bandwidth usage.
A larger parameter
value indicates a
worse differentiation
effect for bandwidth
allocation of non-
real-time services.
This, however,
leads to a lower
probability of
emptying the buffer
of the transport
The parameter resource group and
modification has no is unlikely to affect
impact on the the bandwidth
None equipment. usage. V100R001C00 Transport
set to an
excessively great
value, some UL
bandwidths are
wasted and the
system capacity
decreases.
set to an
excessively small
value, the actrual
transmission load
will exceed the UL
The parameter available
modification has no bandwidth, affecting
impact on the the quality of
None equipment. admitted services. V100R001C01 Transport
set to an
excessively great
value, some DL
bandwidths are
wasted and the
system capacity
decreases.
set to an
excessively small
value, the actrual
transmission load
will exceed the DL
The parameter available
modification has no bandwidth, affecting
impact on the the quality of
A greater value
indicates a larger
capability of the
The parameter queue in a
modification has no transmission
impact on the resource group to
None equipment. buffer packets. V100R001C01 Transport

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The base station

cannot access the
network if this
parameter is set to
DISABLE and no
IPSec tunnel has
been set up
between the SCTP
host and the SCTP
The parameter peer for the SCTP
modification has no links or IPv6 SCTP
impact on the links in an IPSec-
None equipment. protected network. V100R008C00 Transport
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The base station
cannot access the
network if this
parameter is set to
DISABLE and no
IPSec tunnel has
been set up
between the SCTP
host and the SCTP
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the


The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The base station
cannot access the
network if this
parameter is set to
DISABLE and no
IPSec tunnel has
been set up
between the SCTP
host and the SCTP
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The base station

cannot access the
network if this
parameter is set to
DISABLE and no
IPSec tunnel has
been set up
between the SCTP
host and the SCTP
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
set to ON,
admission decision
for handover
services or new
services depends
on uplink transport
resources. This
prevents excessive
service admission
and ensures the
quality of admitted
services.
set to OFF,
admission decision
for handover
services or new
services does not
depend on uplink
transport resources.
Therefore, the QoS
of ongoing services
The parameter cannot be ensured
modification has no if excessive
impact on the services are
None equipment. admitted. V100R001C00 Transport
set to ON,
admission decision
for handover
services or new
services depends
on downlink
This prevents
excessive service
admission and
ensures the quality
of admitted
services.
set to OFF,
admission decision
for handover
services or new
services does not
depend on downlink
Therefore, the QoS
of ongoing services
The parameter cannot be ensured
modification has no if excessive
impact on the services are
None equipment. admitted. V100R001C00 Transport
A larger value
indicates a higher
admission success
rate of handover
services but a
greater probability
of overloaded
transport due to the
actual traffic
fluctuation of real-
time services.
A smaller value
indicates a lower
admission success
rate of handover
services but a
smaller probability
The parameter of overloaded
modification has no transport due to the
impact on the traffic fluctuation of
None equipment. real-time services. V100R002C00 Transport
A larger value
indicates a higher
admission success
rate of handover
services but a
greater probability
of overloaded
transport due to the
actual traffic
fluctuation of real-
time services.
A smaller value
indicates a lower
admission success
rate of handover
services but a
smaller probability
The parameter of overloaded
modification has no transport due to the
impact on the traffic fluctuation of
None equipment. real-time services. V100R002C00 Transport
A larger value
indicates a higher
admission success
rate of gold-level
new services but a
smaller UL
bandwidth reserved
for handover
services and less
effect of
differentiating
admitted services.
A smaller value
indicates a lower
admission success
rate of gold-level
new services but a
greater UL
bandwidth reserved
for handover
The parameter services and more
modification has no effect of
impact on the differentiating
A larger value
indicates a higher
admission success
rate of gold-level
new services but a
smaller DL
bandwidth reserved
for handover
services and less
effect of
differentiating
admitted services.
A smaller value
indicates a lower
admission success
rate of gold-level
new services but a
greater DL
bandwidth reserved
for handover
A larger value
indicates a higher
admission success
rate of silver-level
new services but a
smaller UL
bandwidth reserved
for gold-level new
services and less
effect of
differentiating
admitted services.
A smaller value
indicates a lower
admission success
new services but a
greater UL
bandwidth reserved
for gold-level new
A larger value
indicates a higher
admission success
new services but a
smaller DL
bandwidth reserved
for gold-level new
services and less
effect of
differentiating
admitted services.
A smaller value
indicates a lower
admission success
new services but a
greater DL
bandwidth reserved
for gold-level new
A larger value
indicates a higher
admission success
rate of bronze-level
new services but a
smaller UL
bandwidth reserved
for silver-level new
services and less
effect of
differentiating
admitted services.
A smaller value
indicates a lower
admission success
new services but a
greater UL
bandwidth reserved
A larger value
indicates a higher
admission success
new services but a
smaller DL
bandwidth reserved
services and less
effect of
differentiating
admitted services.
A smaller value
indicates a lower
admission success
new services but a
greater DL
bandwidth reserved
A greater value of
this parameter
indicates a greater
UL admission
bandwidth for GBR
services and a
higher admission
success rate of
GBR services but a
smaller UL
bandwidth reserved
for non-GBR
services.
A smaller value of
this parameter
indicates a smaller
UL admission
bandwidth for GBR
services and a
lower admission
success rate of
GBR services but a
The parameter greater UL
modification has no bandwidth reserved
impact on the for non-GBR
A greater value of
this parameter
indicates a greater
DL admission
bandwidth for GBR
services and a
higher admission
success rate of
GBR services but a
smaller DL
bandwidth reserved
for non-GBR
services.
A smaller value of
this parameter
indicates a smaller
DL admission
bandwidth for GBR
services and a
lower admission
success rate of
GBR services but a
The parameter greater DL
modification has no bandwidth reserved
impact on the for non-GBR
If the UL transport
bandwidth is
insufficient and this
parameter is set to
ON, the admission
success rate of
high-priority
services may rise,
but the call drop
rate of low-priority
services may also
increase.
If the UL transport
bandwidth is
insufficient and this
parameter is set to
OFF, the call drop
services is not
affected, but the
The parameter admission success
modification has no rate of high-priority
impact on the services is not
None equipment. guaranteed. V100R002C00 Transport
set to ON when the
DL transport
bandwidth is
insufficient, the
admission success
rate of high-priority
services increases.
The service drop
services, however,
also increases.
set to OFF when
the DL transport
bandwidth is
insufficient, the
admission success
rate of high-priority
services might not
increase. The
The parameter service drop rate of
modification has no low-priority
impact on the services, however,
None equipment. is not affected. V100R002C00 Transport
set to ON, the sum
of uplink admission
bandwidths of all
logical ports carried
on a physical port is
allowed to be
greater than the
uplink bandwidth of
the physical port. In
this case, however,
there is a risk of
excessive admitted
services if
PORTULCACSW is
set to ON.
set to OFF, the sum
of uplink admission
bandwidths of all
not allowed to be
greater than the
uplink bandwidth of
the physical port. In
this case, there is
no risk of excessive
admitted services
The parameter regardless of
modification has no whether
impact on the PORTULCACSW is
None equipment. set to ON. V100R003C00 Transport
set to ON, the sum
of downlink
admission
bandwidths of all
allowed to be
greater than the
downlink bandwidth
In this case,
however, there is a
risk of excessive
admitted services if
PORTDLCACSW is
set to ON.
set to OFF, the sum
of downlink
admission
bandwidths of all
not allowed to be
greater than the
downlink bandwidth
In this case, there is
no risk of excessive
admitted services
The parameter regardless of
modification has no whether
impact on the PORTDLCACSW is
None equipment. set to ON. V100R003C00 Transport
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
set to ON, the
quality of high-
priority services is
guaranteed when
the transport
network is
overloaded with
uplink services.
set to OFF, the
quality of high-
guaranteed when
The parameter the transport
modification has no network is
impact on the overloaded with
None equipment. uplink services. V100R001C00 Transport
set to ON, the
quality of high-
guaranteed when
the transport
network is overload
with downlink
services.
set to OFF, the
quality of high-
not guaranteed
The parameter when the transport
modification has no network is
impact on the overloaded with
None equipment. downlink services. V100R001C00 Transport
A larger parameter
value indicates a
triggering the UL
transport overload
algorithm, ensuring
the bandwidth of
high-priority
services, and
releasing low-
priority services.
A smaller parameter
value indicates a
triggering the UL
transport overload
algorithm, ensuring
the bandwidth of
The parameter high-priority
modification has no services, and
impact on the releasing low-
None equipment. priority services. V100R001C00 Transport
A larger parameter
value indicates a
smaller number of
services released
by OLC and a
OLC ping-pong
operations.
A smaller parameter
value indicates a
larger number of
services released
The parameter by OLC and a lower
modification has no probability of OLC
impact on the ping-pong
None equipment. operations. V100R001C00 Transport
A smaller parameter
value indicates a
longer time to leave
the overload state
and a lower
probability of
releasing services
excessively.
A larger parameter
value indicates a
shorter time to
leave the overload
The parameter state and a higher
modification has no probability of
impact on the releasing services
None equipment. excessively. V100R001C00 Transport
A larger parameter
value indicates a
triggering the DL
transport overload
algorithm, ensuring
the bandwidth of
high-priority
services, and
releasing low-
priority services.
A smaller parameter
value indicates a
triggering the DL
transport overload
algorithm, ensuring
the bandwidth of
The parameter high-priority
modification has no services, and
impact on the releasing low-
None equipment. priority services. V100R001C00 Transport
A larger parameter
value indicates a
smaller number of
services released
by OLC and a
OLC ping-pong
operations.
A smaller parameter
value indicates a
larger number of
services released
The parameter by OLC and a lower
modification has no probability of OLC
impact on the ping-pong
None equipment. operations. V100R001C00 Transport

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The base station

cannot access the
network if this
parameter is set to
DISABLE and no
IPSec tunnel has
been set up
between the user-
plane host and
user-plane peer for
The parameter the internal user-
modification has no plane paths in an
impact on the IPSec-protected
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The base station

cannot access the
network if this
parameter is set to
DISABLE and no
IPSec tunnel has
been set up
between the user-
plane host and
user-plane peer for
The parameter the internal user-
modification has no plane paths in an
impact on the IPSec-protected
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the


The parameter
modification has no
impact on the
A smaller parameter
value indicates a
The parameter lower priority of the
modification has no data transmission in
impact on the layer 2 and affects
None equipment. the QoS. V100R001C00 Transport

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
A smaller parameter
value indicates a
The parameter lower priority of
modification has no data transmission
impact on the and affects the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
N/A N/A None V100R003C00 Equipment

The parameter
modification has no
impact on the
None equipment. None V100R003C00 Equipment
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the


The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
If all the ALD power

supply switches
that control the
power supply to a
TMA are turned off,
the TMA will fail to
work properly. This
will increase the call
drop rate and
The parameter decrease the
modification has no access success
impact on the rate for users at the
None equipment. cell edge. V100R003C00 Equipment
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the



The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
This parameter
must be consistent
with the network
plan. Otherwise, the
call drop rate
increases and the
access success
rate decreases for
users at the
The parameter coverage edge, and
modification has no the interference on
impact on the neighboring cells
None equipment. increases. V100R003C00 Equipment
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the




The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
This parameter
must be consistent
with the network
call drop rate
increases and the
The parameter access success
modification has no rate decreases for
impact on the users at the
None equipment. coverage edge. V100R003C00 Equipment
This parameter
must be consistent
with the network
call drop rate
increases and the
The parameter access success
modification has no rate decreases for
impact on the users at the
None equipment. coverage edge. V100R003C00 Equipment
The parameter
modification has no
impact on the


The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
This parameter
must be consistent
with the network
downlink coverage
of the cell will be
affected, which
increases the call
drop rate,
decreases the
access success
rate for users at the
The parameter cell edge, and
modification has no increases the
impact on the interference to
None equipment. neighboring cells. V100R003C00 Equipment
This parameter
must be consistent
with the network
uplink coverage of
the cell will be
affected, which
increases the call
drop rate,
decreases the
access success
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
This parameter
must be consistent
with the network
coverage of the cell
will be affected,
which increases the
call drop rate,
decreases the
access success
This parameter
must be consistent
with the network
coverage of the cell
will be affected,
which increases the
call drop rate,
decreases the
access success

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The BS should be
reset to validate the
parameter
None modification. None V100R001C01 Equipment
The BS should be
parameter
The BS should be
parameter
The modification of
priorities will affect
the selection order
if the clock source The parameter
is selected modification has no
automatically by the impact on the
system. equipment. None V100R001C01 Equipment

The BS should be
parameter
The BS should be
parameter
The BS should be
parameter
The BS should be
parameter
The BS should be
parameter

The modification of
the selection order
when the clock The parameter
source is selected modification has no
The BS should be
parameter

Only the TOD clock The BS should be

of input type can reset to validate the
serve as a clock parameter
source. modification. None V100R001C01 Equipment
The BS should be
parameter
The BS should be
parameter
The BS should be
parameter
The parameter
modification has no
impact on the
The clock accuracy

is affected if there is
an excessively
large difference
[about 20 m (66 ft)]
between the value The parameter
of this parameter modification has no
and the actual impact on the
feeder length. equipment. None V100R001C01 Equipment
The modification of
the selection order
The BS should be
parameter
The BS should be
parameter
The BS should be
parameter
The parameter
modification has no
impact on the
This parameter
must be consistent
The parameter with the network
modification has no plan. Otherwise, the
impact on the location precision
None equipment. decreases. V100R001C01 Equipment
This parameter
must be consistent
The parameter with the network
modification has no plan. Otherwise, the
impact on the location precision
None equipment. decreases. V100R001C01 Equipment
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The clock accuracy

is affected if there is
an excessively
large difference [no
less than 20 m (66
ft)] between the
value of this The parameter
parameter and the modification has no
actual feeder impact on the
length. equipment. None V100R002C00 Equipment



If the working mode
of the satellite card
is set to a value
inconsistent with
the network The parameter
planning, the modification has no
satellite card cannot impact on the
search satellites. equipment. None V100R001C01 Equipment

When the clock
source is selected
system, the The parameter
modification of modification has no
priorities will affect impact on the
the selection order. equipment. None V100R001C01 Equipment
The BS should be
parameter
The BS should be
parameter
The BS should be
parameter
The BS should be
parameter
The BS should be
parameter
The BS should be
parameter
The parameter
should be The BS should be
consistent with reset to validate the
configuration of the parameter
server domain. modification. None V100R001C01 Equipment
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The BS should be
parameter
The parameter
modification has no
impact on the

The modification of
the selection order
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The BS should be
parameter
The BS should be
parameter
The BS should be
parameter
The BS should be
parameter
The BS should be
parameter
The BS should be
parameter
The BS should be
parameter
The BS should be
parameter
The BS should be
parameter
The parameter
modification has no
impact on the

The modification of
the selection order
The BS should be
parameter
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the


The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the


The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the



The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the




The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the




The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
None N/A None V100R008C00 Equipment

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The BS should be
parameter
The board should

the parameter
The board should
the parameter
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The board should

the parameter
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the




The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the






The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the
The parameter
modification has no
impact on the




The parameter
modification has no
impact on the
The parameter
modification has no
impact on the








The parameter
modification has no
impact on the




The parameter
modification has no
impact on the












The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The start time

should be earlier
than the end time. If
the start time is not
specified, the The parameter
default start time, modification has no
namely 2000-01-01 impact on the
00:00:00, is used. equipment. None V100R005C00 Equipment
The end time

should be later than
the start time. If the
end time is not
specified, the The parameter
default end time, modification has no
namely 2037-12-31 impact on the
23:59:59, is used. equipment. None V100R005C00 Equipment
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The BS should be
parameter

The parameter
modification has no
impact on the
The BS should be
parameter
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the

The parameter
modification has no
impact on the




If the manager is
not specified, the The parameter
EMU cannot be modification has no
operated or impact on the
maintained. equipment. None V100R001C00 Equipment
If the manager is
EMU cannot be modification has no
If the actual
connection is
inconsistent with The parameter
the configuration, modification has no
the EMU cannot be impact on the
The communication
address of the EMU
is usually 2. If it is
not 2, set it The parameter
according to the modification has no
physical DIP switch impact on the
settings. equipment. None V100R001C00 Equipment
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the




If the manager is
FMU cannot be modification has no
If the manager is
The parameter
modification has no
impact on the
The communication
address of the FMU
not 14, set it
according to the
settings of physical
DIP switch. The parameter
Otherwise, the modification has no
communication with impact on the
the FMU fails. equipment. None V100R001C00 Equipment
The parameter
modification has no
impact on the

The FMU cannot be

operated or The parameter
maintained if no modification has no
manager is impact on the
specified. equipment. None V100R003C00 Equipment
If the manager is




If the manager is
TCU cannot be modification has no
If the manager is
TCU cannot be modification has no
If the actual
connection is
inconsistent with
the data The parameter
configuration, the modification has no
TCU cannot be impact on the
The communication
address of the TCU
not 7, set it The parameter
according to the modification has no
physical DIP switch impact on the
settings. equipment. None V100R001C00 Equipment
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the


The parameter
modification has no
impact on the




The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
If the manager is
PMU cannot be modification has no
If the manager is
PMU cannot be modification has no
If the actual
connection is
inconsistent with
the data The parameter
configuration, the modification has no
PMU cannot be impact on the
The communication
address must be
consistent with the
DIP switch settings
on the PMU. The parameter
communication impact on the
fails. equipment. None V100R001C00 Equipment
Before changing
this parameter,
ensure that
batteries are not
being tested. The parameter
change may fail to impact on the
take effect. equipment. None V100R001C00 Equipment
Before changing
this parameter,
ensure that
batteries are not
Before changing
this parameter,
ensure that
batteries are not
Before changing
this parameter,
ensure that
batteries are not
The parameter
modification has no
impact on the
Before changing
this parameter,
ensure that
batteries are not
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the
The parameter
modification has no
impact on the






N/A N/A None V

Parameter Reference

Hochgeladen von

Dokumentinformationen

Copyright

Verfügbare Formate

Dieses Dokument teilen

Dokument teilen oder einbetten

Freigabeoptionen

Stufen Sie dieses Dokument als nützlich ein?

Sind diese Inhalte unangemessen?

Copyright:

Verfügbare Formate

Parameter Reference

Hochgeladen von

Copyright:

Verfügbare Formate

3900 Series Base Station

HUAWEI TECHNOLOGIES CO., LTD.

Trademarks and Permissions

Huawei Technologies Co., Ltd.

Technologies Co., Ltd.

ed in this document are the property of their respective holders.

Parameter Attribute Description

GUI Value Range

Initial Value Source

Service Interrupted After Modification

Impact on Radio Network

Man Machine Language (MML) command related to the parameter.

Whether the parameter is used to identify an MO instance.

Parameter values recommended for different scenarios.

Possible interruption scope.

Product version in which the parameter is introduced.

nges, see the release notes.

e value can be BTS3900, BTS3900 WCDMA, or

gh northbound interfaces. To modify these

ll be deleted after the beta test or test at the

eat impact on network KPIs or performance.

(start character of an MML message), or --- END

ute of an MML message is null

d URL parameters can contain a backslash (\) or

tain the following characters:

ces, +++ (start character of an MML message), or

value of a parameter of the enumeration type, or

The parameter value comes from the radio network

mes from the equipment plan.

e equipment needs to be restarted after the

, the modes are separated by commas. For

ECHO Frame BTS3900, BTS3900 MOD GTPU

ECHO Frame BTS3900, BTS3900 MOD GTPU

BTS3900, BTS3900 MOD GTPU

BTS3900, BTS3900 ADD CA

BTS3900, BTS3900 ADD CA

BTS3900, BTS3900 ADD CA

BTS3900, BTS3900 ADD CA

BTS3900, BTS3900 ADD CA

BTS3900, BTS3900 MOD CERTREQ

BTS3900, BTS3900 MOD CERTREQ

CERTREQ BTS3900, BTS3900 MOD CERTREQ

BTS3900, BTS3900 MOD CERTREQ

APPCERT BTS3900, BTS3900

APPCERT BTS3900, BTS3900

APPCERT BTS3900, BTS3900

APPCERT BTS3900, BTS3900

APPCERT BTS3900, BTS3900

APPCERT BTS3900, BTS3900

CROSSCERT BTS3900, BTS3900

CROSSCERT BTS3900, BTS3900

CROSSCERT BTS3900, BTS3900

TRUSTCERT BTS3900, BTS3900

TRUSTCERT BTS3900, BTS3900

TRUSTCERT BTS3900, BTS3900

CRLTSK BTS3900, BTS3900

CRLTSK BTS3900, BTS3900

CRLTSK BTS3900, BTS3900 ADD CRLTSK

CRLTSK BTS3900, BTS3900

CERTCHKTSK BTS3900, BTS3900

ACL BTS3900, BTS3900 ADD ACL

BTS3900, BTS3900 ADD ACL

ACL6 ADD ACL6

ACL6 ADD ACL6