Beruflich Dokumente
Kultur Dokumente
WATER
COOLED
PACKAGED
UNITS
QUALITY SYSTEM
MALAYSIA
MS ISO 9001
REG. NO: AR 0239
1
Compact, self-contained unit that offer low installation cost plus dependable
performance.
From Carrier's excellence in engineering comes a new, compact of single package cooling unit - the 50PVB090 to
250 and 50PV300 to 965. They are available as water cooled package units with a capacity of 26.3kW up
to 282.8kW. They are engineered for commercial or industrial applications. These units are attractively
styled to meet your new construction or renovation needs.
FEATURES:
50PVB200 & 250 and 50PV300 to 965 are supplied with taper lock pulleys and wedge belts for better quality
and easy servicing.
50PVB090 and 125 are supplied with - 3 speed direct driven fan motor.
Compact shell and tube water cooled condenser with enhanced fin tubes for better performance and easy cleaning.
Safety features like high & low pressure switches, crankcase heater, lock out relay and solid state anti short
cycle timer are standard supplied with the units.
Condenser water pipe can either be left or right side connections and easily be changed in the field.
Slide-in or slide-out fan deck assembly for easy servicing and maintenance for 50PVB090 & 125.
Morning Mist powder painted cabinet complies with ASTM B117 for 500 hours salt-spray test.
Integral filter frame and cleanable type filters are factory supplied.
Front access control with indicator light for power on and fault status are easily accessible.
2
PHYSICAL DATA
MODEL NO: 50PVB090 50PVB125 50PVB200 50PVB250 50PV300 50PV360 50PV480 50PV600 50PV750 50PV965
NOMINAL CAPACITY* kW 26.3 36.60 58.6 73.3 87.9 105.5 140.7 175.7 220.1 282.8
Btu/h 90 000 125 000 200 000 250 000 300 000 360 000 480 000 600 000 750 000 965 000
OPERATING WEIGHT kg 249 299 560 652 720 790 950 1500 2050 2550
REFRIGERANT R-22
OPERATING CHARGE
Circuit 1 kg 4.7 5.0 4.7 5.0 10.0 15.0 17.0 12.0 15.0 17.0
Circuit 2 kg - - 4.7 5.0 - - - 12.0 15.0 17.0
NOMINAL POWER SUPPLY V-Ph-Hz 400 - 3 - 50
COMPRESSOR
Type Scroll Hermetic Reciprocating Semi Hermetic
No. of compressor 1 1 2 2 1 1 1 2 2 2
No. of capacity step 1 1 2 2 2 2 2 2 2 2
% of unloading 0/100 0/100 0/50/100 0/50/100 0/66/100 0/66/100 0/66/100 0/50/100 0/50/100 0/50/100
CONDENSER
Type Shell & Tube
No. of condenser 1 1 2 2 1 1 1 2 2 2
INDOOR FAN
Type Centrifugal Forward Curved
Drive Direct Drive Belt Drive
Pulley pitch diameter mm - - 125 132 160 200 200 335 300 280
Air quantity - max** l/s 1520 1900 3120 3820 4470 5520 6680 7500 11330 12980
cfm 3220 4024 6610 8093 9470 11695 14152 15890 24004 27499
Air quantity - min** l/s 700 1240 2020 2420 3320 4020 5430 4500 6330 9980
cfm 1483 2627 4280 5127 7034 8517 11504 9534 13411 21144
FAN MOTOR
Type 3 Speed Motor 1 Speed Motor
STD fan speed rpm - - 1450 1450 860 860 1100 940 870 830
Fan speed, H 1375 1320 - - - - - - - -
M 1055 950 - - - - - - - -
L 835 740 - - - - - - - -
Max. allowable rpm 1350 1320 1200 1200 1100 1100 1200 1100 1100 1100
Pulley pitch diameter mm - - 75 95 95 118 160 200 180 160
Motor kW kW 0.73 1.35 2.2 3.7 3.7 5.5 7.5 11.0 11.0 15.0
No. of fan motor 1 1 1 1 1 1 1 1 1 1
INDOOR COIL
Rows - fins/m 2 - 709 2 - 709 2 - 709 3 - 709 3 - 590 3 - 590 3 - 590 3 - 590 3 - 590 4 - 590
Face area sq. m 0.63 0.63 1.17 1.17 1.40 1.64 1.90 3.09 3.80 4.62
RETURN AIR FILTER
Type Washable Washable/Throwaway Washable Washable/Throwaway
No. 1 1 2 2 16 16 16/4
Size mm x mm 1012 x 616 1266 x 924 1584 x 599 1782 x 599 500 x 395/ 406 x 635 406 x 635/
595 x 395 406 x 508
CONNECTIONS
Condenser - water inlet 1 1/4"BSP (MPT) 1 1/2"BSP (MPT) 1 1/2"BSP (MPT) 2 1/2"BSP (MPT) 1 1/2"BSP (MPT) 2 1/2"BSP (MPT)
Condenser - water outlet 1 1/4"BSP (MPT) 1 1/2"BSP (MPT) 1 1/2"BSP (MPT) 2 1/2"BSP (MPT) 1 1/2"BSP (MPT) 2 1/2"BSP (MPT)
Drain 1"NPT (FPT) 1 1/2"NPT (FPT) 1 1/2"BSP (MPT) 1 1/2"NPT (FPT) 1 1/2"NPT (FPT) 1 1/2"NPT (FPT)
CONTROL PRESSURE
SETTING
High cut-out psig 310
High cut-in 210
Low cut-out 27
Low cut-in 67
NOTE:
1. Nominal data based on air-inlet temperature of 26.7C DB/19.5C WB and leaving condenser water temperature of 30C (inlet)/35C (outlet).
2. Static pressure is based on standard drive and nominal air flow.
3
ELECTRICAL DATA
4
DIMENSION
50PVB090 & 125
DIMENSION (cont')
50PVB200 & 250
DIMENSION (cont')
50PV300 & 360
* - WATER CONNECTIONS ARE INTERCHANGEABLE EITHER LEFT OR RIGHT. (Standard Factory Supply is on the right)
- CENTER OF GRAVITY
** - FOR NON STANDARD UNIT ONLY
7
DIMENSION (cont')
50PV480
* - WATER CONNECTIONS ARE INTERCHANGEABLE EITHER LEFT OR RIGHT. (Standard Factory Supply is on the right)
- CENTER OF GRAVITY
** - FOR NON STANDARD UNIT ONLY
8
DIMENSION (cont')
50PV600
* - WATER CONNECTIONS ARE INTERCHANGEABLE EITHER LEFT OR RIGHT. (Standard Factory Supply is on the right)
- CENTER OF GRAVITY
** - FOR NON STANDARD UNIT ONLY
9
DIMENSION (cont')
50PV750 & 965
* - WATER CONNECTIONS ARE INTERCHANGEABLE EITHER LEFT OR RIGHT. (Standard Factory Supply is on the right)
- CENTER OF GRAVITY
** - FOR NON STANDARD UNIT ONLY
10
FAN MOTORS AND DRIVES (For 50PVB200 & 250 and 50PV300 to 965)
1. 50PVB090 & 125 are furnished with direct drive 3 speed motor.
2. Standard motors and drives are furnished for all units.
3. Special motors and drives must be purchased locally.
4. Determine the special drives with the following equations.
Equation 1: Pulley Pitch Diameter PDf Fan pulley pitch diameter (mm)
PDm Motor pulley pitch diameter (mm)
PDf = PDm x RPSm RPSf Fan speed
RPSf RPSm Motor speed
PDm = PDf x RPSf Lb V belt length (mm)
RPSm Lw Center line distance (mm)
Sb V belt size
Equation 2: V Belt Length
11
PERFORMANCE DATA
12
PERFORMANCE DATA
50PVB200 COOLING CAPACITY
LEAVING
CONDENSER EVAPORATOR AIR (L/S) : B.F.
WATER 2020 : 0.13 2570 : 0.15 3120 : 0.18
TEMPERATURE EVAPORATOR AIR ENTERING WET BULB (C)
(C) 22.0 19.5 17.0 22.0 19.5 17.0 22.0 19.5 17.0
TC 67.8 62.5 57.7 71.6 66.1 60.9 73.7 68.1 62.8
30 SHC 34.0 39.8 46.0 37.3 44.8 52.4 39.9 49.0 58.2
KW 12.3 12.3 12.2 12.8 12.7 12.7 13.4 13.3 13.1
PERFORMANCE DATA
50PVB250 COOLING CAPACITY
LEAVING
CONDENSER EVAPORATOR AIR (L/S) : B.F.
WATER 2420 : 0.06 3120 : 0.08 3820 : 0.10
TEMPERATURE EVAPORATOR AIR ENTERING WET BULB (C)
(C) 22.0 19.5 17.0 22.0 19.5 17.0 22.0 19.5 17.0
TC 79.2 72.9 67.3 81.8 75.3 69.8 84.6 77.9 73.0
30 SHC 40.9 49.0 57.2 44.5 55.1 65.8 47.8 60.7 72.9
KW 14.6 14.6 14.5 15.9 15.9 15.7 17.3 17.3 17.0
13
PERFORMANCE DATA
50PV-300 COOLING CAPACITY
LEAVING
CONDENSER EVAPORATOR AIR (L/S) : B.F.
WATER 3320 : 0.07 3895 : 0.09 4470 : 0.11
TEMPERATURE EVAPORATOR AIR ENTERING WET BULB (C)
(C) 22.0 19.5 17.0 22.0 19.5 17.0 22.0 19.5 17.0
TC 95.7 86.6 81.3 98.7 89.5 84.3 101.0 91.9 86.9
30 SHC 47.2 58.7 66.4 50.3 63.9 72.8 53.3 68.7 78.6
KW 16.4 16.3 16.2 16.5 16.4 16.3 16.5 16.4 16.3
PERFORMANCE DATA
50PV-360 COOLING CAPACITY
LEAVING
CONDENSER EVAPORATOR AIR (L/S) : B.F.
WATER 4020 : 0.07 4770 : 0.09 5520 : 0.11
TEMPERATURE EVAPORATOR AIR ENTERING WET BULB (C)
(C) 22.0 19.5 17.0 22.0 19.5 17.0 22.0 19.5 17.0
TC 112.2 102.1 96.2 116.1 106.0 100.1 119.3 109.1 103.8
30 SHC 56.1 68.2 77.5 60.1 75.6 85.7 63.8 81.5 93.0
KW 24.0 23.7 23.4 24.0 23.8 23.6 24.1 23.9 23.1
14
PERFORMANCE DATA
50PV-480 COOLING CAPACITY
LEAVING
CONDENSER EVAPORATOR AIR (L/S) : B.F.
WATER 5430 : 0.08 6055 : 0.10 6680 : 0.12
TEMPERATURE EVAPORATOR AIR ENTERING WET BULB (C)
(C) 22.0 19.5 17.0 22.0 19.5 17.0 22.0 19.5 17.0
TC 153.9 140.3 131.2 157.3 143.6 134.7 160.6 145.9 138.0
30 SHC 80.1 99.2 111.8 83.8 105.1 119.3 87.4 110.9 126.2
KW 33.5 32.7 32.1 33.7 32.9 32.4 33.8 33.1 32.6
PERFORMANCE DATA
50PV-600 COOLING CAPACITY
LEAVING
CONDENSER EVAPORATOR AIR (L/S) : B.F.
WATER 4700 :0.09 6500 : 0.12 7710 : 0.14
TEMPERATURE EVAPORATOR AIR ENTERING WET BULB (C)
(C) 22.0 19.5 17.0 22.0 19.5 17.0 22.0 19.5 17.0
TC 186.8 171.3 156.8 197.3 181.1 166.9 201.3 184.8 170.9
30 SHC 88.1 105.5 122.2 97.4 121.4 143.9 103.1 131.1 156.9
KW 40.0 39.0 38.0 40.8 39.8 39.0 41.2 40.2 39.4
15
PERFORMANCE DATA
50PV-750 COOLING CAPACITY
LEAVING
CONDENSER EVAPORATOR AIR (L/S) : B.F.
WATER 6330 : 0.06 8830 : 0.09 11330 : 0.12
TEMPERATURE EVAPORATOR AIR ENTERING WET BULB (C)
(C) 22.0 19.5 17.0 22.0 19.5 17.0 22.0 19.5 17.0
TC 224.4 209.2 195.4 239.4 223.3 209.9 247.6 231.4 220.2
30 SHC 106.8 125.0 143.0 117.7 145.4 171.0 127.7 163.2 191.8
KW 44.3 43.7 43.1 44.6 44.2 43.7 44.8 44.4 44.4
PERFORMANCE DATA
50PV-965 COOLING CAPACITY
LEAVING
CONDENSER EVAPORATOR AIR (L/S) : B.F.
WATER 9980 :0.04 11480 : 0.06 12980 : 0.08
TEMPERATURE EVAPORATOR AIR ENTERING WET BULB (C)
(C) 22.0 19.5 17.0 22.0 19.5 17.0 22.0 19.5 17.0
TC 296.6 275.6 257.4 304.7 283.4 265.6 310.6 289.3 272.4
30 SHC 147.8 178.7 207.4 155.2 191.6 224.8 144.2 203.4 224.1
KW 60.3 59.0 57.6 60.6 59.4 58.2 60.9 59.8 58.7
16
FAN PERFORMANCE
1. The fan performance curves are based on wet coil and clean filters.
2. Bold fan motor are standard factory supplied, other sizes need to be field supplied and installed.
3. 50PVB090 and 125 are supplied with 3 speed direct drive fan motor.
50PVB090
700 900 1100 1310 1520
LOW 170 40 - - -
MED 270 170 60 - - 0.73 kW
HIGH 340 280 220 150 60
50PVB125
1240 1405 1570 1735 1900
LOW 120 - - - -
MED 230 160 80 - - 1.35 kW
HIGH 300 240 180 130 60
50PVB200
2020 2295 2570 2845 3120
700 120 75 35 - -
800 200 160 100 50 - 2.2 kW
900 290 235 180 125 70
1000 390 340 280 220 155 3.7 kW
1100 510 450 385 - -
50PVB250
2420 2770 3120 3470 3820
800 85 30 - - -
900 160 95 30 - - 3.7 kW
1000 250 180 100 25 -
1100 360 275 195 110 25 5.5 kW
1200 480 390 300 205 120
50PV-300
3320 3610 3895 4180 4470
700 90 60 30 - - 3.7 kW
800 170 135 100 70 35
900 265 220 185 145 110 5.5 kW
1000 380 335 290 245 200
1100 515 465 - - -
50PV-360
4020 4395 4770 5145 5520
700 90 45 - - -
800 190 135 80 35 - 5.5 kW
900 310 250 190 110 60
1000 450 385 320 250 180 7.5 kW
1100 610 540 470 - -
50PV-480
5430 5740 6055 6370 6680
800 50 25 - - -
900 105 80 55 30 -
1000 180 150 120 90 65 7.5 kW
1100 265 230 200 165 135
1200 365 325 290 250 -
50PV-600
5500 6000 6500 7000 7500
800 245 215 180 145 105
900 370 340 300 270 230 11.0 kW
1000 530 490 450 405 360
1100 695 655 620 575 530
50PV-750
6330 7580 8830 10080 11330
700 300 180 - - -
800 460 325 175 - - 11.0 kW
900 640 520 380 130 40 15.0 kW
1000 - - - 320 100
50PV-965
9980 10730 11480 12230 12980
700 130 50 - - -
800 270 190 120 - - 15.0 kW
900 420 340 260 200 100 18.5 kW
1000 590 520 410 340 280
17
CONDENSER PERFORMANCE
Notes:
1. The following Condenser Pressure Drop values are based on the fouling factor of 0.044 m2 K/kW.
2. Water flow rate can be calculated using the formula below:
Water Flow (l/min)
= TC + Power Input
Water Temp. Rise x 0.07
Where:
TC = Total cooling capacity (kW)
Power Input = Compressor power input (kW)
Water Temp. Rise = Cond. leaving water temp. - Cond. entering water temp. (0C)
18
ELECTRICAL WIRING DIAGRAMS
19
ELECTRICAL WIRING DIAGRAMS (cont')
20
50PV300, 340 & 450 WIRING DIAGRAM (Auto-transformer Start)
21
50PV300, 360 & 480 WIRING DIAGRAM (Part Winding Start)
22
50PV600, 750 & 965 WIRING DIAGRAM (Part Winding Start)
23
50PV750 & 965 WIRING DIAGRAM (Auto-transformer Start)
24
50PV750 & 965 WIRING DIAGRAM (Part Winding Start)
25
GUIDE SPECIFICATIONS
GENERAL CONDENSER
1.1 Unit shall be single-package vertical type and shall 4.1 Water cooled condenser shall be shell in tube type. It
include self-contained water cooled condenser(s). shall be equipped with a pressure relief device and
liquid line shut off valve (50PV300 to 50PV965).
1.2 Total cooling capacity of the unit shall be _____ kW,
or greater at conditions of ________ l/s evaporator air 4.2 Finned tubes shall be seamless with no interior
entering unit at ________ C wet bulb temperature. joints. Threaded pipe connections shall be provided
Total sensible capacity shall be ____________ kW or for water supply and return lines. Each unit shall
greater with _______ C dry-bulb temperature at the contain a full operating refrigerant charge.
above conditions.
EVAPORATOR COIL
1.3 Water cooled condenser shall maintain __________
saturated condensing temperature when supplied 5.1 Evaporator coil shall be of non-ferrous construction
with _______ l/min of _______ C water at a ______ with aluminium plate fins mechanically bonded to
water fouling factor. seamless copper tubing.
1.4 Maximum water pressure drop for the condenser(s) 5.2 Coils shall be tested at 2760 kPag air pressure while
at these conditions shall be _____ kPa. submerged in water.
26
MEMO
35
MEMO
36
Carrier
International
Sdn. Bhd.
Malaysia
REV. 5 50PV
06 2007
37