TITLE: Operation of a DC Shunt Moto in Clockwise and Counter Clockwise
Rotation EQUIPMENTS: Shunt Wound DC Machine PROCEDURE / STEPS:
1. Shunt Wound machines are prepared by the lecturer.
2. Connections are made from the power supply to the machines (Refer to machine notes for correct Voltage and Current levels) 3. Windage connections on each machines are made (refer to Diagram 1a) 4. Check the connections between power supply and machine as well as winding connections. 5. Switch on the power and run the machine. 6. Troubleshoot if there is a problem 7. Switch off power and remove the connections when finish. 8. Repeat with the next motor setup (refer to Diagram 1b) Clockwise Rotation