Beruflich Dokumente
Kultur Dokumente
FlexiCAM
Infrared Night Version
Model : PK-7MAR
www.a4tech.com
How to use ?
1
2
Specification
Image Sensor: 1/4〃CMOS, 640×480pixels
Frame Rate: 30fps@640x480, @600x800, @320x240,
@160x120
Lens: F=2.4, f=4.9mm
View Angle: 54 degree
Focus Range: Automatic focus, 10cm to infinity
Exposure Control: Automatic
White Balance: Automatic
Still Image Capture 1280x960,800x600,640X480,352x288,320x240,
Res.: 176x144,160x120
Flicker Control: 50Hz, 60Hz and None
Computer Port USB/MIC .port
4
3.Then follow the installing instruction to complete the installation
process
5
4. the Installation Process is completed
Amcap Usage
After installation of viewcam driver, you can preview image and set the
6
adjustments for the properties sheet through the image application
software which comes with the product.
Image-preview
Click icon on the desktop and the Amcap image application will
7
if Amcap image fails to appear,please select the item “preview”
under the “ Options” shown as below :
8
Device description
Go to “Devices” and select “A4 Tech PC Camera”.
(Refer to below diagram)
9
The “Camera Control” sheet in properties window will be opened, and
some functions can be adjusted at here according to the needs,
including “Image Control, WhiteBalance, Auto Mode Control…”
(Showing in image below)
10
Advanced settings
The camera offers the image special effect and video special effect
settings for the users, our design engineers have defined 23 special
effect settings, by using them, it will allow you to operate easily and
edit the images more efficiently, showing as below.
11
To select the “Face Tracking” sheet, the wonderful face tracing
function can be regulated at this page!
12
Digital ViewCam adjustable focus description
The camera can provide 10 times adjustable focus function under
CIF(320×240)resolution, accompanying digital adjustable control
13
control pole
NOTE : It totally supports QQ、MSN ….etc video chat software under
352*288、320*240、176*144、160*120 …etc resolutions.
Uninstalling Driver
14
Click“Start”from the task bar
and choose “Programs”. Select
“A4 Tech PC Camera H”
->“Uninstall” and follow the
instructions.
VP-EYE
The latest version of VP-EYE offers a new look that makes image editing
much more fun and intuitive.There are a lot of improvements and
enhancements that comes with VP-EYE 4.0 ,here are some of the new
features that you can expect in VP-EYE 4.0.
1. Enter the setup interface of the ViewCam driver installation
15
2. Click "VP-EYE" for increment application installation, the below
interface as shown in the picture will automatically pop up for
your setup.
16
(Image 1)
6. Click the ”help” icon in above window (as show Image 1),
you will know more function introduction about this VP-EYE
Funtions.
Troubleshooting
18
Solving Method: Adjust the color settings related to video snapping
course options or have the color settings related set as “ default “
19
laptop/notebook
Because the USB ViewCam can easily conflicts with video card,
therefore, please follow this path: " my computer----> control panel
-----> system-----> device management ----->Video Card
And other pointing devices ------>A4tech View Cam “, then define and
double-click “A4tech.port View Cam ". After opened a window,
please check the tab "resource” to find the conflict information. If it is
conflicted with other video card, you should try to change an IRQ of
them.
20
2. Sometimes, the MSN messenger is too old to support both sound
card and your ViewCam, so please upgrade your MSN messenger to
support your ViewCam and sound card.
System’s requirements
21
·Personal Computer, Laptop, Desktop, or IBM Compatible Computer
with Pentium 166MHz minimum, and with an active USB (universal
serial bus) port.
·Windows98SE, ME, 2000, XP, MCE2005, XP(X64), VISTAR X86
TECH SUPPORT
For tech support, please visit our website at
http://support.a4tech.com/ or email us at support@a4tech.com
22