Beruflich Dokumente
Kultur Dokumente
GRILLES,
REGISTERS
& DIFFUSERS
REGISTERS
GRILLES &
and Registers and Registers
Spiral Duct Grilles Industrial Grilles
Filter Grilles Specialty Grilles
CEILING DIFFUSERS
DIFFUSERS
Square Face Cone Diffusers Round Ceiling
CEILING
Louvered Face Diffusers Diffusers
Concentric Supply/Return Diffusers VAV Diffusers
Perforated Ceiling Diffusers Accessories
CD
LINEAR DIFFUSERS
LINEAR DIFFUSERS & GRILLES
& GRILLES
Formations
Linear Slot Diffusers
LDG
PLENUM SLOT
DIFFUSERS
Plenum Diffusers with adjustable pattern controller
Plenum Diffusers with high capacity fixed patterns
Accessories
PSD
CE
SQUARE
grille is available in both aluminum and galvanized steel construction
GRILLES
specifically designed for spiral or round duct applications. PAGE 125
CEILING
Filter Grilles
METALAIRE offers a complete line of filter grilles which include
louvered, cubed core and perforated face. All filter grilles are
AND
designed for either 1"or 2" thick filters (by others) and include a
DIFFUSERS
hinged face for filter access. METALAIRE filter grilles are available in
aluminum, steel and stainless steel construction and are an excellent
REGISTERS
choice for exhaust and return applications PAGE 133
5700
heavy duty grilles are an excellent choice for return or exhaust in high
traffic areas such as gymnasiums. PAGE 161
Door/Transfer Grilles
METALAIRE offers a complete line of door and transfer grilles with a
variety of options for sight proof or lightproof applications. PAGE 176
Industrial Grilles
METALAIRE offers a complete line of industrial grilles designed for
ceiling and high sidewall installations requiring high capacity and
performance. The METALAIRE industrial grille offering consists of
single and double deflection grilles, high capacity drum louvers and
outside air louvers. PAGE 192
Security Grilles
METALAIRE offers a complete line of security products including
perforated, lattice, and screened face heavy duty steel grilles for
use in minimum and maximum security areas, these include
correctional facilities, prisons and psychiatric hospitals where PAGE 256
security is paramount.
GRILLES AND REGISTERS
GR2 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SUPPLY AND RETURN GRILLES
MODELS V MODELS 4002
SUPPLY/RETURN GRILLES
MODEL 4004 MODEL LS4
METALAIRE offers a complete line of supply and return grilles available in steel and aluminum
construction to meet any application.
VH Double deflection
4002 Aluminum
4002S Steel
4004S Steel
GR4 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
Aluminum Stamped Frame Return
The stamped frame return combines the advantage of solid performance with
competitive pricing.
RHP - Fixed blade - 40 deflection PAGE 66
SUPPLY/RETURN GRILLES
Aluminum/Steel Louvered Return
The series RH grilles are designed with 40 blade deflection to minimize direct
sight lines into the ductwork. The series RH is available in aluminum, extruded
aluminum or steel construction. This series is available in both surface mount and
T-bar Lay-in frame styles.
RH Aluminum
RHE Extruded aluminum
SRH Steel PAGE 68
Aluminum/Steel Return
The series 4002R return grille is designed to match the 4000 series supply
models. These grilles are available in both aluminum and steel construction. This
series is available in both surface mount and T-bar Lay-in frame styles. O or 40
fixed blades.
4002R Aluminum
CC1 1 x 1 x 1
MODEL V
The V series grilles are an economical series of
supply grilles available in single deflection (V),
double deflection (VH) and single deflection with an
SUPPLY/RETURN GRILLES
Available Sizes
8x4 12 x 8
8x6 14 x 4
10 x 4 14 x 6
10 x 6 14 x 8
10 x 8 16 x 6
12 x 4 16 x 8
12 x 6
GR6 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SUPPLY/RETURN GRILLES
Mounting Hole
V
Available Sizes
8x4 12 x 8
8x6 14 x 4
10 x 4 14 x 6
10 x 6 14 x 8
10 x 8 16 x 6
12 x 4 16 x 8
12 x 6
SERIES V SPECIFICATIONS
SUPPLY SINGLE DEFLECTION SUPPLY SINGLE DEFLECTION
ALUMINUM MODEL V MULTI-SHUTTER DAMPER
Air outlets shall be model V manufactured by METALAIRE. ALUMINUM MODEL VM
Units shall be single deflection supply grilles of aluminum Air outlets shall be model VM manufactured by
SUPPLY/RETURN GRILLES
construction with a one piece stamped frame and a METALAIRE. Units shall be single deflection supply with
single set of vertical blades. The units shall be size and a face operated multi-shutter damper. Units shall be
quantity as outlined in the plans and specifications. of aluminum construction with a one piece stamped
Border shall be 1 1/4" wide with aerodynamically shaped frame and a single set of vertical blades. The units
deflector blades on 2/3" center. Deflector blades shall shall be the size and quantity as outlined in the plans
be individually adjustable. Units designed for surface and specifications. Border shall be 1 1/4" wide with
mounting applications shall be provided with screw holes aerodynamically shaped deflector blades on 2/3" centers.
in the face of the device. Blades shall pivot in friction Deflector blades shall be individually adjustable. Units
mounting retainers. Retainers shall hold the deflector designed for surface mounting applications shall be
blade position throughout the specified operating range provided with screw holes in the face of the device. Blades
of the device. Metal friction wires are not acceptable. shall pivot in friction mounting retainers. Retainers shall
Optional opposed blade damper shall be constructed of hold the deflector blade position throughout the specified
steel (Model OBD) or aluminum (Model OBDA). operating range of the device. Metal friction wires are
not acceptable.
V
GR8 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
V MODEL NUMBER SPECIFICATION
ALUMINUM STAMPED BORDER
Model Neck Available Finishes
V-1 Single Deflection - Surface Mount 6 8 10 12 14 Standard
SUPPLY/RETURN GRILLES
VH-1 Double Deflecton - Surface Mount 4 X X X X 01 White
VM-1 Single Deflection - Multi Shutter Damper Surface Mount 6 X X X X X Optional
8 X X X X 02 Satin Silver
10 X 03 Black
12 X 24 Mill
28 Custom Color
Available Accessories
OBD Steel Opposed Blade Damper (V & VH Only)
OBDA Aluminum Opposed Blade Damper ( V & VH Only)
L9 Equalizing Grid
PF Plaster Frame
NSH No Screw Holes
Nk Vel 200 300 400 500 600 700 800 900 1000
Size Duct Area ft
SUPPLY/RETURN GRILLES
CONTINUED
GR10 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES V PERFORMANCE DATA
MODEL V, VM, VH
Nk Vel 200 300 400 500 600 700 800 900 1000
Size Duct Area ft
SUPPLY/RETURN GRILLES
Ps .007 .015 .027 .042 .061 .083 .109 .137 .170
CFM 60 90 120 150 180 210 240 270 300
14x04 .39 NC - - - 12 17 22 26 30 33
Throws 3-6-13 6-9-17 8-13-20 10-16-23 13-17-25 15-19-27 16-20-28 17-21-30 18-23-32
CFM 97 145 194 242 291 3369 387 436 484
14x06 .58 NC - - - 14 19 24 28 32 35
Throws 3-7-16 7-12-22 11-16-26 13-20-29 16-22-31 19-24-34 21-26-36 22-27-38 23-29-40
DEFINITION OF UNITS
V
CFM Cubic Feet per Minute (air)
Nk Vel Neck velocity of air stream in Feet Per Minute
Ps Static pressure = PtPv (inches of water column)
NC Noise criterion, Sound pressure level. NC ratings are based on sound power level (lw)
RE: 10-12 watts minus a 10dB room attenuation in all octave bands.
Throws Non-isothermal horizontal throws (supply air temperture 20 F colder than average room air temperature)
values are for 150 fpm - 100 fpm - 50 fpm (feet per minute)
MODEL 4000
The 4000 series of supply grilles sets the standards
for performance and appearance in the industry.
They are available in aluminum (4000) and steel
SUPPLY/RETURN GRILLES
GR12 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SUPPLY/RETURN GRILLES
Model: H4002S-1 - Single
Model:
Deflection
H4002S-1Grille Model: V4002S-1 - Single
- Single Deflection Grille Model:
Deflection
V4002S-1Grille
- Single Deflection Grille
With Horizontal BladesWith Horizontal Blades With Vertical Blades With Vertical Blades
4000
Listed Size Listed Size Listed Size Listed Size
1 1 1
Listed Size - 16 1
Listed Size - 16
Listed Size -16 Listed Size -16
Damper Operator Damper Operator Damper Operator Damper Operator
(Screwdriver Slot) (Screwdriver Slot) (Screwdriver Slot) (Screwdriver Slot)
5 5 1 .666 .666
34 5 31 5 1
34 1
34
32 32 32 4 32
Model: 4002SM
Model: 4002SM (( Single Deflection
Single Deflection Register
Register ) )
(( Multi-Shutter
Multi-Shutter Damper-Vertical Blades )
Damper-Vertical Blades )
Deflection Blades 9
1
2 16
Vertical 15
8 4 Damper Operator
Deflection Blades
Damper 2
1
5
32 1 Operator 15
8 4
14
Model:
Model:
H4004-1
Model:H4004-1
(Double
H4004-1 (Double
Deflection
(Double Listed
Deflection
Grille)
Deflection Size + 2
Grille)
Grille) Face
Face
View
FaceView
(Double
View(Double
Deflection)
(Double Deflection)
Deflection)
(Horizontal
(Horizontal
Front
(HorizontalFront
Blades)
FrontBlades)
Blades) (Horizontal
(Horizontal
Front
(HorizontalFront
Blades)
FrontBlades)
Blades)
3 33
Mounting
Mounting
Holes
MountingHoles
16 Diameter
Holes 16Diameter
16 Diameter
Listed Size
Listed
ListedSize
Size (Countersunk)
(Countersunk)
(Countersunk)
Listed
Listed Size
Size -21 - 11
Listed Size -22
Horizontal
Horizontal
& Vertical
Horizontal&&Vertical
Vertical 1 71177
8 88
Deflection
Deflection
Blades
DeflectionBlades
Blades
5 55 11 11
14 .666
.666
.666
32 32 144
32
Listed
Listed
Size
ListedSize
+ 2++22
Size
9 99
16 16
16
4000
Face
Face
View
FaceView
(Double
View(DoubleDeflection)
(Double Deflection)
Deflection)
(Vertical
(Vertical
Front
(VerticalFront
Blades)
Front Blades)
Blades)
Model: V4004-1
Model:
Model: (Double
V4004-1
V4004-1(DoubleDeflection
(Double Grille)
Deflection
DeflectionGrille)
Grille)
(Vertical Front
(Vertical
(Vertical Blades)
Front
FrontBlades)
Blades) Mounting
Mounting
Holes 3 33
Holes
Mounting 16 Diameter
Holes 16Diameter
16 Diameter
(Countersunk)
(Countersunk)
(Countersunk)
Listed
Listed
Size
Listed Size
Size
Horizontal
Horizontal
& Vertical
Horizontal&&Vertical
Vertical Listed
Listed Size
Listed - 1 --11
Size
Size
Deflection
Deflection
Blades
DeflectionBlades
Blades
2 22
17 77
81188
5 55 11 11
14 .666
.666
144 .666 9 99
32 32
32
Listed Size
Listed
Listed + 2++22
Size
Size 16 16
16
Model: H4004-1
Model:
Model: (Double
H4004-1
H4004-1 Deflection
(Double
(Double Register)
Deflection
DeflectionRegister)
Register) Model:
Model:
V4004-1
Model: V4004-1
(Double
V4004-1(Double
Deflection
(Double Deflection
Register)
DeflectionRegister)
Register)
(With Damper-Horizontal
(With
(With Front
Damper-Horizontal
Damper-Horizontal Blades)
Front
Front Blades)
Blades) (With
(With
Damper-Vertical
(WithDamper-Vertical
Front
Damper-Vertical Front
Blades)
FrontBlades)
Blades)
Listed
Listed
SizeSize
Listed Size Listed
Listed
SizeSize
Listed Size
1 11
1 11 Listed
Listed
SizeSize
Listed -Size
16 - -16
16
Listed SizeSize
Listed
Listed -Size
16 - -16
16 Damper
Damper
Operator
Damper Operator
Operator
Damper
Damper
Operator
Damper Operator
Operator Options:
Options:
Options: (Screwdriver
(Screwdriver
Slot)Slot)
(Screwdriver Slot)
Options:
Options:
Options: (Screwdriver
(Screwdriver
Slot)Slot)
(Screwdriver Slot)
Opposed
Opposed
Blades
Opposed Blades
Blades
Opposed
Opposed
Blades
Opposed Blades
Blades Damper
Damper
Damper
Damper
Damper
Damper 37 77
8 3388
3 7 3377
8 88
5 55 1 1 11
5 55 1 1 11 32 32
32 14 144 .666.666
.666
14 144 .666.666
.666
32 32
32
Listed
Listed
Size
ListedSize
+ 2++22
Size Listed
Listed
Size
ListedSize
+ 2++22
Size
GR14 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
4 4
Model: V4004-6 (Double Deflection Grille) Lay in T-Bar - With Filler Panel
(Vertical Front Blades)
1
Overall Panel = T-Bar Spacing - 4
REGISTERS
2
GRILLES &
Deflection Blades
Lay-In
13
4
Filler Panel
1 14 .666
Listed Size + 2
23 3 x 23
3 Overall Face
1 4 4
8
Model: H4004-6 (Double Deflection Grille) Lay in T-Bar - With Filler Panel Model: H4004-6 (Double Deflection Grille) Lay in T-Bar - With Filler Panel
(Horizontal Front Blades) (With Damper - Horizontal Front Blades)
1
Overall Panel = T-Bar Spacing - 4
Options:
Overall Panel = T-Bar Spacing - 1
4
Horizontal & Vertical Opposed Blades Listed Size - 1
Deflection Blades Listed Size - 1 Damper 2 Damper Operator
2
(Screwdriver Slot)
Horizontal & Vertical
Lay-In Deflection Blades
13
4
Filler Panel Lay-In
SUPPLY/RETURN GRILLES
13
Filler Panel 4
1
14 .666
11
4
.666
Listed Size + 2
Listed Size + 2
3
23 3 x 23 Overall Face 3
23 3 x 23 Overall Face
4 4 4 4
Model: V4004-6 (Double Deflection Grille) Lay in T-Bar - With Filler Panel
Model: V4004-6 (Double Deflection Grille) Lay in T-Bar - With Filler Panel (With Damper Vertical Front Blades)
(Vertical Front Blades) Overall Panel = T-Bar Spacing - 1
4
1
Overall Panel = T-Bar Spacing - 4
Options:
1 14 .666
Listed Size + 2
Listed Size + 2
3
23 3 x 23 Overall Face
1 4 4 23 3 x 23
3 Overall Face
8 4 4
Model: H4004-6 (Double Deflection Grille) Lay in T-Bar - With Filler Panel
H4004S-1(With Damper
Sidewall - Horizontal
/ Ceiling
H4004S-1 Front
Surface
Sidewall Blades)
Mount/ Ceiling
/ Horizontal
Surface
1
Front
Mount
Blades
/ Horizontal Front Blades
Overall Panel = T-Bar Spacing - 4
4000
Options:
H4004S-1 Sidewall / H4004S-1 Sidewall
Ceiling Surface / Ceiling
Mount Surface
/ Horizontal Mount
Front / Horizontal Front Blades
Blades
Opposed Blades 1
H4004S-1 Sidewall / Ceiling
H4004S-1Surface Mount
Sidewall
Listed -/ Horizontal
/ Ceiling
Size
2 SurfaceFront Blades
Mount / Horizontal Front Blades
Damper Damper Operator
(Screwdriver Slot)
Horizontal & Vertical
Deflection
H4004S-1 SidewallBlades
/ Ceiling Surface Mount / Horizontal Front Blades
H4004S-1 Sidewall / Ceiling Surface Mount / Horizontal Front Blades
Lay-In
13
Filler Panel 4
V4004S-1 Sidewall / Ceiling
V4004S-1Surface
Sidewall
Mount
/ Ceiling
Vertical
Surface
Front Blades
Mount Vertical Front Blades
11
4
.666
Model: V4004-6 (Double Deflection Grille) Lay in T-Bar - With Filler Panel
V4004S-1 Sidewall / Ceiling Surface Mount Vertical Front Blades
(With Damper V4004S-1 Sidewall
Vertical Front Blades)/ Ceiling Surface Mount Vertical Front Blades
Overall Panel = T-Bar Spacing - 1
4
Options:
H4004S-6 Ceiling T-Bar
H4004S-6
Lay-In Horizontal
Ceiling T-Bar
Front
Lay-In
Blades
Horizontal Front Blades
Opposed Blades Damper Operator
H4004S-6Damper H4004S-6
Ceiling T-Bar Ceiling
Lay-In HorizontalT-Bar
Listed Size 1 Lay-In Horizontal
- Front
2
Front
Blades (Screwdriver Blades
Slot)
Horizontal & Vertical T-Bar T-Bar
H4004S-6 Ceiling T-Bar Lay-In Horizontal
H4004S-6 Front
Ceiling T-Bar Blades
Lay-In Horizontal Front Blades Grid Grid
Deflection Blades
Size Size
T-Bar
-1/4" T-Bar
-1/4"
Lay-In 3 Grid Grid
H4004S-6 Ceiling T-Bar
Filler Panel
Lay-In
H4004S-6 Horizontal
Ceiling
Overall Face Front
Size =T-Bar
T-Bar GridBlades
Lay-In
SizeHorizontal
Overall 4Front
- 1/4"Size = 1T-Bar
Face GridBlades
Size - 1/4" T-Bar Size
T-Bar
Size
Grid
-1/4" -1/4"
Grid
1 Size Size
V4004S-6 Ceiling T-Bar
V4004S-6
1Lay-In
4 OverallVertical
Ceiling
Face SizeFront
T-Bar
= T-BarBlades
.666 Lay-In
Grid SizeVertical
Overall - 1/4"Size Front
Face = T-Bar Blades
Grid Size - 1/4"
-1/4" -1/4"
Listed Size + 2 T-Bar T-Bar
Overall Face
V4004S-6 Size T-Bar
Ceiling = T-Bar Lay-In
Grid SizeVertical
Overall - 1/4"Size Front
Face = T-Bar Blades
Grid Size - 1/4" Grid Grid
V4004S-6 Ceiling T-Bar Lay-In Vertical
3 3 Front Blades Size
23 x 23 Overall Face T-Bar Size
T-Bar
4 4 -1/4" -1/4"
V4004S-6 Ceiling T-Bar Lay-In Vertical
V4004S-6 Front Blades
Ceiling T-Bar Lay-In Vertical Front Blades Grid Grid
Overall Face Size = T-Bar Grid SizeFace
Overall - 1/4"Size = T-Bar Grid Size - 1/4" Size Size
T-Bar
-1/4" T-Bar
-1/4"
Grid Grid
V4004S-6 Ceiling T-Bar Lay-In Vertical Front Blades Size
V4004S-6 Ceiling T-Bar Lay-In Vertical Front Blades T-Bar
Size T-Bar
-1/4"
Overall Face Size = T-Bar Grid
Overall
Size Face
- 1/4"Size = T-Bar Grid Size - 1/4" Grid
-1/4" Grid
Size Size
-1/4" -1/4"
Overall
Overall Face Size = T-Bar Grid SizeFace
- 1/4"Size = T-Bar Grid Size - 1/4" T-Bar T-Bar
Grid Grid
Overall Face Size = T-Bar Grid SizeFace
Overall - 1/4"Size = T-Bar Grid Size - 1/4" Size Size
-1/4" -1/4"
blades) or H4002/H4002S (horizontal front blades) front blades) or H4002M/H4002SM (horizontal front
manufactured by METALAIRE. Units shall be single blades) manufactured by METALAIRE. Units shall be single
deflection supply grilles of aluminum (4002) or steel deflection supply with a face operated multi-shutter
(4002S) construction and a single set of vertical blades. damper. Units shall be single deflection supply grilles of
The units shall be the size and quantity as outlined in the aluminum (4002M) or steel (4002SM) construction and
plans and specifications. Border shall be 1 1/4"wide a single set of vertical blades. The units shall be the size
with aerodynamically shaped deflector blades on 2/3" and quantity as outlined in the plans and specifications.
center. Deflector blades shall be individually adjustable. Border shall be 1 1/4"wide with aerodynamically shaped
Units designed for surface mounting applications shall deflector blades on 2/3" center. Deflector blades shall
be provided with screw holes in the face of the device. be individually adjustable. Units designed for surface
Blades shall pivot in friction mounting retainers. mounting applications shall be provided with screw holes
Retainers shall hold the deflector blade position in the face of the device. Blades shall pivot in friction
throughout the specified operating range of the mounting retainers. Retainers shall hold the deflector
device. Metal friction wires are not acceptable. blade position throughout the specified operating range
4000
Optional opposed blade damper shall be constructed of the device. Metal friction wires are not acceptable.
of steel (Model OBD) or aluminum (Model OBDA).
Performance Specification
Damper must be operable from the face of the register. The manufacturer shall provide published performance
SUPPLY DOUBLE DEFLECTION data. Data shall be tested in accordance to ANSI/
ALUMINUM/STEEL MODEL ASHRAE Standard 70-2006.
4004/4004S
Paint Specification
Air outlets shall be model V4004/V4004S (vertical front Process shall be anodic electro-deposition using an
blades) or H4004/H4004S (horizontal front blades)
anodic acrylic paint. Units shall undergo pre-treatment
manufactured by METALAIRE. Units shall be double
including a pressurized spray stage using an alkaline
deflection supply grilles of aluminum (4004) or steel
cleaner and a de-ionized water rinse.
(4004S) construction with front vertical blades and
rear horizontal blades. The units shall be the size and
quantity as outlined in the plans and specifications.
Border shall be 1 1/4"wide with aerodynamically shaped
deflector blades on 2/3" center. Deflector blades shall
be individually adjustable. Units designed for surface
mounting applications and be provided with screw holes
in the face of the device. Blades shall pivot in friction
mounting retainers. Retainers shall hold the deflector
blade position throughout the specified operating range of
the device. Metal friction wires are not acceptable.
Optional opposed blade damper shall be constructed of
steel (Model OBD) or aluminum (Model OBDA).
Damper must be operable from the face of the register.
GR16 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
4000 MODEL NUMBER SPECIFICATION
SINGLE/DOUBLE DEFLECTION SURFACE MOUNT
Model Neck
V4002-1 Al. - Vertical Blade - Single Def. 6 8 10 12 14 16 18 20 22 24 26
SUPPLY/RETURN GRILLES
H4002-1 Al. - Horizontal Blade - Single Def. 4 X X X X X X X X X X X
V4002S-1 Steel - Vertical Blade - Single Def. 5 X X X X X X X X X X X
H4002S-1 Steel - Horizontal Blade - Single Def. 6 X X X X X X X X X X X
V4004-1 Al. - Vertical Blade - Double Def. 8 X X X X X X X X X X X
H4004-1 Al. - Horizontal Blade - Double Def. 10 X X X X X X X X X X X
V4004S-1 Steel - Vertical Blade - Double Def. 12 X X X X X X X X X X X
H4004S-1 Steel - Horizontal Blade - Double Def. 14 X X X X X X X X X X X
16 X X X X X X X X X X X
18 X X X X X X X X X X X
20 X X X X X X X X X X X
22 X X X X X X X X X X X
24 X X X X X X X X X X X
26 X X X X X X X X X X X
4000
28 X X X X X X X X X X X
30 X X X X X X X X X X X
32 X X X X X X X X X X X
34 X X X X X X X X X X X
36 X X X X X X X X X X X
38 X X X X X X X X X X X
40 X X X X X X X X X X X
42 X X X X X X X X X X X
44 X X X X X X X X X X X
46 X X X X X X X X X X X
48 X X X X X X X X X X X
28 X X X X X X X X X X X
30 X X X X X X X X X X X
32 X X X X X X X X X X X
34 X X X X X X X X X X X
36 X X X X X X X X X X X
38 X X X X X X X X X X X
40 X X X X X X X X X X X
42 X X X X X X X X X X X
44 X X X X X X X X X X X
46 X X X X X X X X X X X
48 X X X X X X X X X X X
GR18 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
4000 MODEL NUMBER SPECIFICATION
SINGLE/DOUBLE DEFLECTION LAY-IN
Model Neck
V4002-6 Al. - Vertical Blade - Single Def. 6 8 10 12 14 16 18 20 22 24 Module
SUPPLY/RETURN GRILLES
H4002-6 Al. - Horizontal Blade - Single Def. 4 X X
V4002S-6 Steel - Vertical Blade - Single Def. 6 X X
12 x 12
H4002S-6 Steel - Horizontal Blade - Single Def. 8 X X
V4004-6 Al. - Vertical Blade - Double Def. 10 X
H4004-6 Al. - Horizontal Blade - Double Def. 4 X X X X X X X X
V4004S-6 Steel - Vertical Blade - Double Def. 6 X X X X X X X X
24 x 12
H4004S-6 Steel - Horizontal Blade - Double Def. 8 X X X X X X X X
10 X
4 X X X X X X X X
6 X X X X X X X X
8 X X X X X X X X
10 X X X X X X X X
12 X X X X X X X X
24 x 24
4000
14 X X X X X X X X
16 X X X X X X X X
18 X X X X X X X X
20 X X X X X X X X
22 X
4 X X X X X X X X X X
6 X X X X X X X X X X
8 X X X X X X X X X X
10 X X X X X X X X X X
48 x 24
12 X X X X X X X X X X
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
48 x 24
V4004S-6 Steel - Vertical Blade - Double Def. 14 X X X X X X X X X X
H4004S-6 Steel - Horizontal Blade - Double Def. 16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
22 X
GR20 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
4000 MODEL NUMBER SPECIFICATION
SINGLE/DOUBLE DEFLECTION LAY-IN
Model Neck
V4002-6 Al. - Vertical Blade - Single Def. 6 8 10 12 14 16 18 20 22 24 Module
SUPPLY/RETURN GRILLES
H4002-6 Al. - Horizontal Blade - Single Def. 4 X X X X X X X X X X
V4002S-6 Steel - Vertical Blade - Single Def. 6 X X X X X X X X X X
H4002S-6 Steel - Horizontal Blade - Single Def. 8 X X X X X X X X X X
V4004-6 Al. - Vertical Blade - Double Def. 10 X X X X X X X X X X
H4004-6 Al. - Horizontal Blade - Double Def. 12 X X X X X X X X X X
V4004S-6 Steel - Vertical Blade - Double Def. 14 X X X X X X X X X X
H4004S-6 Steel - Horizontal Blade - Double Def. 16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
22 X X X X X X X X X X
X X X X X X X X X X
48 x 48
24
26 X X X X X X X X X X
28 X X X X X X X X X X
4000
30 X X X X X X X X X X
32 X X X X X X X X X X
34 X X X X X X X X X X
36 X X X X X X X X X X
38 X X X X X X X X X X
40 X X X X X X X X X X
42 X X X X X X X X X X
44 X X X X X X X X X X
46
Options
48 x 48
24
26 X X X X X X X X X X
28 X X X X X X X X X X
4000
30 X X X X X X X X X X
32 X X X X X X X X X X
34 X X X X X X X X X X
36 X X X X X X X X X X
38 X X X X X X X X X X
40 X X X X X X X X X X
42 X X X X X X X X X X
44 X X X X X X X X X X
46 X
Options
GR22 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
4000 MODEL NUMBER SPECIFICATION
SINGLE DEFLECTION MULTI-SHUTTER DAMPER
Model Neck Available Finishes
V4002M-1 Aluminum - Vertical Blade 6 8 10 12 14 16 18 20 22 24 Standard
SUPPLY/RETURN GRILLES
H4002M-1 Aluminum - Horizontal Blade 4 X X X X X X X X X X 01 White
V4002SM-1 Steel - Vertical Blade 5 X X X X X X X X X X Optional
H4002SM-1 Steel - Horizontal Blade 6 X X X X X X X X X X 02 Satin Silver
8 X X X X X X X X X X 03 Black
10 X X X X X X X X X X 24 Mill (Al. Construction Only)
12 X X X X X X X X X X 28 Custom Color
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
22 X X X X X X X X X X
24 X X X X X X X X X X
4000
Ac ft CFM 24 36 48 60 72 84 96 120
06x04 0.17 NC - - - - - - 11 18
Throw 2-4-8 4-6-11 5-8-13 7-10-14 8-11-16 9-12-17 10-13-18 12-14-20
Ac ft CFM 38 57 76 95 114 133 152 190
06x06 0.25 NC - - - - - 10 13 20
Throw 4-8-17 7-12-21 10-15-24 12-17-26 14-20-28 15-21-30 17-23-32 19-24-34
08x08 Ac ft CFM 73 110 146 183 219 256 292 365
10x06 0.42 NC - - - - 11 13 16 22
12x05 Throw 3-6-14 6-10-19 9-14-22 11-17-25 14-19-27 16-21-29 18-22-31 20-25-35
Ac ft CFM 82 123 164 205 246 287 328 410
12x06 0.50 NC - - - 11 11 13 16 23
4000
CONTINUED
GR24 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES 4000 PERFORMANCE DATA
MODELS H/V4002, H/V4004, H/V4002M, H/V4002S, H/V4004S, H/V4002SM
SUPPLY/RETURN GRILLES
Ac ft CFM 244 366 488 610 732 853 975 1219
14x14 1.22 NC - 10 12 13 15 18 21 27
4000
24x10
Throw 6-13-28 13-21-39 18-28-45 23-35-50 28-39-55 32-42-59 36-45-63 41-50-71
Ac ft CFM 323 485 646 808 969 1131 1292 1615
16x16 1.62 NC 11 12 13 15 17 19 22 28
Throw 6-14-29 14-22-40 19-29-47 24-36-52 29-40-57 34-44-62 38-47-66 43-52-74
DEFINITION OF UNITS
CFM Air volume is cubic feet per minute
Nk Vel Neck Velocity is the airstream velocity in the duct just before it reaches the supply outlet;
measured in feet per minute
fpm Velocity of air stream in Feet per Minute
Throw Throw distance in feet are for terminal velocities of 150 fpm, 100 fpm and 50 fpm respectively
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
Pt Total pressures in inches of water
Ac Actual Core Free Area in square feet
24x12 Ac ft CFM 364 546 727 909 1090 1272 1453 1816
36x08 1.82 NC 11 12 13 15 17 20 22 29
48x06 Throw 6-13-30 14-23-43 20-31-50 26-38-55 31-43-61 36-46-66 40-50-70 45-55-78
Ac ft CFM 414 621 87 1034 1240 1447 1653 2066
18x18 2.07 NC 12 13 14 16 18 20 23 29
Throw 7-15-33 15-25-46 22-33-53 27-41-59 33-46-65 38-49-70 43-53-75 48-59-84
Ac ft CFM 456 685 914 1142 1371 1600 1829 2386
30x12
2.28 NC 12 13 14 16 18 20 23 30
36x10
Throw 7-16-34 16-26-48 23-34-56 29-43-62 34-48-68 40-52-74 45-56-79 51-62-88
Ac ft CFM 515 772 1030 1287 1545 1802 2059 2574
20x20 2.59 NC 13 14 15 17 19 21 24 30
4000
22x22 Ac ft CFM 626 940 1254 1567 1881 2195 2509 3136
24x20 3.13 NC 13 14 16 17 19 22 25 31
48x10 Throw 8-19-40 19-30-56 27-40-65 34-50-73 40-56-80 47-61-86 53-65-92 59-73-103
24x24 Ac ft CFM 750 116 1501 1877 2252 2628 3003 3754
36x16 3.75 NC 14 15 16 18 20 23 25 32
48x12 Throw 9-21-44 21-33-62 29-44-71 37-55-80 44-62-87 52-67-94 58-71-101 65-80-113
Ac ft CFM 946 1297 1848 1999 2350 2701 3052 3754
30x24
4.73 NC 15 16 17 19 21 23 26 33
36x20
Throw 10-23-50 19-34-66 29-43-75 35-52-82 41-62-89 47-68-96 53-72-102 65-80-113
Ac ft CFM 1030 1546 2061 2577 3093 3608 4124 5155
28x28 5.15 NC 16 17 18 19 21 24 27 33
Throw 11-24-52 24-39-72 34-52-83 43-65-93 52-72-102 60-78-110 68-83-118 76-93-132
Ac ft CFM 1140 1709 2278 2846 3415 3984 4553 5690
36x24 5.70 16 17 18 20 22 24 27 34
NC
48x18
Throw 11-25-54 25-41-76 36-54-88 45-68-98 54-76-107 63-82-116 72-88-124 80-98-139
Ac ft CFM 1190 1784 2378 2971 3565 4159 4753 5940
30x30 5.95 NC 16 17 18 20 22 24 27 34
Throw 12-26-56 26-42-78 37-56-90 46-69-100 56-78-110 65-84-119 73-90-127 82-100-142
CONTINUED
GR26 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES 4000 PERFORMANCE DATA
MODELS H/V4002, H/V4004, H/V4002M, H/V4002S, H/V4004S, H/V4002SM
SUPPLY/RETURN GRILLES
Ac ft CFM 1270 1905 2540 3175 3810 4445 5080 6350
32x30 6.35 NC 17 18 19 21 23 25 28 34
Throw 12-27-57 27-43-80 38-57-93 48-72-104 57-80-113 67-87-123 76-93-131 85-104-147
Ac ft CFM 1330 1996 2663 3329 3995 4661 5328 6660
36x28 6.65 17 18 19 21 23 25 28 34
NC
42x24
Throw 12-27-59 27-44-82 39-59-95 49-73-106 59-82-116 69-89-126 77-95-134 87-106-150
Ac ft CFM 1430 2146 2863 3579 4295 5011 5728 7160
36x30 7.15 NC 17 18 19 21 23 25 28 35
Throw 13-28-61 28-46-85 41-61-98 51-76-110 61-85-120 71-92-130 80-98-139 90-110-156
36x32 Ac ft CFM 1525 2288 3051 3814 4578 5341 6104 7630
48x24 7.63 NC 17 18 19 21 23 26 28 35
4000
34x34 Throw 13-29-63 29-47-88 42-63-102 52-79-114 63-88-124 73-95-134 83-102-144 93-114-161
Ac ft CFM 1730 2593 3455 4318 5180 6043 6905 8630
36x36 8.65 NC 18 19 20 22 24 26 29 35
Throw 14-31-67 31-50-94 45-67-108 56-84-121 67-94-132 78-101-143 88-108-153 99-121-171
DEFINITION OF UNITS
CFM Air volume is cubic feet per minute
Nk Vel Neck Velocity is the airstream velocity in the duct just before it reaches the supply outlet;
measured in feet per minute
fpm Velocity of air stream in Feet per Minute
Throw Throw distance in feet are for terminal velocities of 150 fpm, 100 fpm and 50 fpm respectively
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
Pt Total pressures in inches of water
Ac Actual Core Free Area in square feet
42x36 10.10 NC 15 18 19 21 22 24 27 29
Throw 4-8-34 15-34-72 34-54-101 48-72-117 60-91-131 72-101-143 85-109-155 95-117-165
Ac ft CFM 1070 2140 3210 4280 5350 6420 7490 8560
40x40 10.70 NC 15 19 20 21 23 25 27 30
DEFINITION OF UNITS
CFM Air volume is cubic feet per minute
Nk Vel Neck Velocity is the airstream velocity in the duct just before it reaches the supply outlet;
measured in feet per minute
fpm Velocity of air stream in Feet per Minute
Throw Throw distance in feet are for terminal velocities of 150 fpm, 100 fpm and 50 fpm respectively
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
Pt Total pressures in inches of water
Ac Actual Core Free Area in square feet
GR28 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
MODEL 4000-AF
The 4000-AF series is METALAIREs premier product,
offering superior construction and high performance with
aerodynamic airfoil blades. The 4000-AF is available in
SUPPLY/RETURN GRILLES
aluminum (4000-AF) and steel (4000S-AF) construction.
It is also available in single deflection (4002-AF/4002S-AF)
and double deflection (4004-AF/4004S-AF).
Available with either vertical or horizontal front blades
Fully adjustable blades assembled on 2/3" center
4000-AF
With Horizontal Blades
Listed Size 16
Listed Size - 2 1
Horizontal Listed
ListedSize
Size
Listed Size 13
4
999
16
Deflection Blades 16
16
Listed Size -21- 1 1
Horizontal
Horizontal
Horizontal Listed Size
Listed Size 2- 2 113 33
4144
Deflection Blades
Deflection Blades
Deflection Blades 3
Mounting Holes 16 Diameter
5 1
14
32 (Countersunk) 333
Mounting
Mounting Holes 16
Mounting Holes
Holes Diameter
16Diameter
16 Diameter
5 5 5 11 11 1 Listed Size + 2
3232 32
14 4 4 Front View
(Countersunk)
(Countersunk)
(Countersunk)
Listed
Listed
Listed Size
+ +2 2+ 2
Size
Size (Horizontal
Front
Blades)
Front View
Front View
View
(Horizontal
(Horizontal Blades)
Blades)
(Horizontal Blades)
Model: V4002-AF-1 - Single Deflection Grille 3
With Vertical
Model: V4002-AF-1Blades- Single Deflection Grille
.666 4
Model:
Model: V4002-AF-1
V4002-AF-1 - Single
- Single Deflection
Deflection Grille
Grille 33
WithWith Vertical
Vertical Blades
Blades
.666
.666
.666 43
4
With Vertical Blades 4
Listed Size 9
Listed
Listed Size
Size1 9 16
Vertical Listed
Listed Size
Size-2
1 13 169
9
Deflection Blades Vertical Listed Size 1- 2 4 16
16
Vertical
Vertical Listed
Listed 1
Size- - 2
Size 133
Deflection
Deflection
Deflection
Blades
Blades
Blades
2 113
44
4
3
5 1 .666 3 Mounting Holes3 16 Diameter
14 1 Mounting Holes 16
3 Diameter
32 5 5 11 4
.666 4 3 (Countersunk)
Mounting Holes 3 Diameter
5 32 11 4
14
.666
.666 33 4 Mounting Holes 16
(Countersunk) 16 Diameter
3232 Listed
Listed + 2+ 2 44
SizeSize (Countersunk)
Front View
(Countersunk)
Front View
Listed Size + 2 Front View
(VerticalView
Blades)
Listed Size + 2 Front
(Vertical Blades)
(Vertical Blades)
(Vertical Blades)
Deflection Blades
5 141 134
32 5 141 3
T-Bar Module
32 - 41 .666 3
T-Bar Module - 41 .666 4
5 141 T-Bar Module T-Bar Module Front View
4
32 Front
3 View
T-Bar Module - 41 .666
(Vertical Blades) (Vertical
4 Blades)
T-Bar Module Front View
(Vertical Blades)
Model:
Model: H4004-AF-1
H4004-AF-1 ( DoubleDeflection
( Double Deflection Grille
Grille )
3 3
( HorizontalFront
Front Blades
Blades ) Mounting Holes
Mounting 16 Diameter
Holes
( Horizontal 16 Diameter
Model: H4004-AF-1 ( Double Deflection
Listed Grille )
Size (Countersunk)
(Countersunk)
Model: H4004-AF-1 ( DoubleListed Size
Deflection Grille ) 3
Mounting Holes3 16 Diameter
( Horizontal Front - 11 )
SizeBlades
Horizontal
Horizontal&&Vertical
Vertical
Listed
( Horizontal
Listed Front
Size Blades
- 2 ) Deflection
Mounting Holes 16 Diameter
Listed Size 2 DeflectionBlades
Blades (Countersunk)
(Countersunk)
Listed Size1 Horizontal & Vertical
Listed Size 1
Listed Size- -22
Horizontal & Vertical
Deflection
15 Blades
Deflection
15
1116 Blades
16
5
5 32
1
11 4 .666 11 15
15
14 .666 16
16 3
32 4 3 Face View
5 5 11 Listed Size + 2 4 ( DoubleFace View )
Deflection
14 .666
Listed Size
.666+ 2 ( Double Deflection
3232 14 33 ( Horizontal Front
Face Blades ) )
View
44 Face
( Horizontal View
Front Blades )
Listed Size
Size+Grille
+22 )
Model: V4004-AF-1 ( DoubleListed
Deflection ( Double
( Double Deflection
Deflection
Mounting Holes 16 3 ) )
Diameter
Model: V4004-AF-1 ( Double Deflection
( Vertical Front Grille
Blades) ) ( Mounting
Horizontal
( Horizontal Front
Front
Holes 3 Blades
Blades ) )
Diameter
(Countersunk) 16
( Vertical Front Blades ) (Countersunk)
Model:
Model: V4004-AF-1
V4004-AF-1 ( DoubleDeflection
( Double DeflectionGrille
Grille) ) Mounting
MountingHoles 3 3
Diameter
Holes1616 Diameter
( Vertical
( Vertical Front
Front
Listed Blades))
Blades
Size (Countersunk)
(Countersunk)
Listed Size- 1
ListedSize Horizontal & Vertical
Listed Size -212 Deflection
HorizontalBlades
& Vertical
Listed
Listed Size
Size
1
Size- -12 Deflection &Blades
ListedSize
Listed 1 15
Horizontal
Horizontal
16
& Vertical
Vertical
2 Deflection
15
Deflection Blades
Blades 3
1 1
5 14 .666 16
15 4 Face View
3
32 1 11 15
16 ( Double Deflection )
5 14 .666+ 2
Listed Size 16 3 4 Face View
32 5 43
( Vertical Front Blades )
5 32 11 .666 4 ( Double
Face View Deflection )
Face View
144 .666+ 2
Listed Size ( (Double
Vertical Deflection )
Front Blades )
32 Listed Size + 2 ( Double Deflection )
Model: H4004D-AF-1 OBDListed Size
( Double +2
Deflection Register ) ( Vertical
Model: V4004D-AF-1 Front Blades )
( Vertical Front Blades ) Register )
OBD ( Double Deflection
( Horizontal Front Blades ) ( Vertical Front Blades )
Model: H4004D-AF-1 With
OBD Opposed
( Double Blade
Deflection
DamperRegister ) Model: V4004D-AF-1
With OBDOpposed ( Double
BladeDeflection
Damper Register )
Model: H4004D-AF-1 OBD ( Double Deflection Register ) Model: V4004D-AF-1 OBD ( Double Deflection
Blades )Register )
Model: H4004D-AF-1( Horizontal
OBD (
( Horizontal
Front
Double Blades )Register
Deflection
Front ) Model: V4004D-AF-1 ( OBD
Vertical( Front
Double Deflection Register )
With Opposed SizeBlades
Blade
Listed )
Damper ( Vertical
With Front
Listed Size Blades )
Opposed Blade Damper
( Horizontal Front Blades )
With Opposed Blade1 Damper ( Vertical
With Opposed Front 1 Blades )
ListedBlade
Size - 16 Listed Size - Blade Damper
With Opposed Damper With Opposed 16Blade Damper
Listed Size
Listed Size Listed Size
Damper Operator
Listed Size 1 1 Damper Operator
Listed
ListedSize
(Screwdriver - 161
Slot) Size
Listed Size1 - 16
GR30 Options:
Size
Listed Size - 16 Options:
Metal Industries, Inc. For complete Listed
product specifications and submittal Size
data, visit -us
1
(Screwdriver
16at www.metalaire.com Slot)
Damper 1
ListedOperator
Damper Size - 16
Operator
Listed Size - 16
Damper Operator
Opposed Blades (Screwdriver Slot) Opposed Blades Damper Operator
16 16
( Vertical Front Blades( )Vertical Front Blades ) (Countersunk) (Countersunk)
REGISTERS
GRILLES &
1 15
16 1 15
16
3 3
5 1
14 5 1
.666 1 4 .666
4 4
Face View Face View
32 32 ( Double Deflection ) ( Double Deflection )
Listed Size + 2 Listed Size + 2 ( Vertical Front Blades( )Vertical Front Blades )
SUPPLY/RETURN GRILLES
Opposed Blades Opposed Blades Opposed Blades Opposed Blades
Damper Damper 3 15
16 3 15
Damper16 Damper 3 15 3 15
16 16
5 5 1
32 32 .666 .666 5
32
14 5
32
.666 1 41 .666
Listed Size + 2 Listed Size + 2 Listed Size + 2 Listed Size + 2
4000-AF
Model: V4004S-AF-1 ( Double Deflection Grille - Vertical Front Blades ) Front View ( Double Deflection )
( Vertical Front Blades )
3
Mounting Holes 16 Diameter
Vertical (Countersunk)
Horizontal Listed Size Deflection
Deflection
Blades Listed Size - 21 Blades
Listed
11
1 16 Size
+2
5
32 1
14 .666
Listed Size + 2 .666 3
4
Model: H4004S-AF-1 ( Double Deflection Grille - Horizontal Front Blades ) Front View ( Double Deflection )
( Horizontal Front Blades )
3
Mounting Holes 16 Diameter
Vertical
Listed Size Deflection
(Countersunk)
Horizontal
Deflection Listed Size - 21 Blades
Blades
11 Listed
1 16 Size
5 +2
1
14
32
Listed size + 2 3
.666 4
Option: H4004S-AF-1-OBD ( Double Deflection Register ) Option: V4004S-AF-1-OBD ( Double Deflection Register )
( Horizontal Front Blades) ( Vertical Front Blades )
With Opposed Blade Damper With Opposed Blade Damper
GR32 Opposed Blade Metal Industries, Inc. For complete Opposed Blade
product specifications and submittal data, visit us at www.metalaire.com
Damper Damper
3 3
5 5
3
Mounting Holes 16 Diameter
Vertical
Listed Size Deflection
(Countersunk)
Horizontal
Deflection Listed Size - 21 Blades
Blades
Listed
REGISTERS
11
GRILLES &
1 16 Size
5 +2
1
14
32
Listed size + 2 3
.666 4
Option: H4004S-AF-1-OBD ( Double Deflection Register ) Option: V4004S-AF-1-OBD ( Double Deflection Register )
( Horizontal Front Blades) ( Vertical Front Blades )
With Opposed Blade Damper With Opposed Blade Damper
SUPPLY/RETURN GRILLES
(Screwdriver Slot) (Screwdriver Slot)
Opposed Blade Opposed Blade
Damper Damper
3 3
5 5
32 32
1 .666 1 .666
14 14
4000-AF
GR34 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
4000 MODEL NUMBER SPECIFICATION
SINGLE/DOUBLE DEFLECTION SURFACE MOUNT AIR FOIL BLADE
Model Neck
V4002-AF-1 Al. - Vertical Blade - Single Def. 6 8 10 12 14 16 18 20 22 24 26
SUPPLY/RETURN GRILLES
H4002-AF-1 Al. - Horizontal Blade - Single Def. 4 X X X X X X X X X X X
V4002S-AF-1 Steel - Vertical Blade - Single Def 5 X X X X X X X X X X X
H4002S-AF-1 Steel - Horizontal Blade - Single Def. 6 X X X X X X X X X X X
V4004-AF-1 Al. - Vertical Blade - Double Def. 8 X X X X X X X X X X X
H4004-AF-1 Al. - Horizontal Blade - Double Def. 10 X X X X X X X X X X X
V4004S-AF-1 Steel - Vertical Blade - Double Def. 12 X X X X X X X X X X X
H4004S-AF-1 Steel - Horizontal Blade - Double Def. 14 X X X X X X X X X X X
16 X X X X X X X X X X X
18 X X X X X X X X X X X
20 X X X X X X X X X X X
22 X X X X X X X X X X X
24 X X X X X X X X X X X
26 X X X X X X X X X X X
4000-AF
28 X X X X X X X X X X X
30 X X X X X X X X X X X
32 X X X X X X X X X X X
34 X X X X X X X X X X X
36 X X X X X X X X X X X
38 X X X X X X X X X X X
40 X X X X X X X X X X X
42 X X X X X X X X X X X
44 X X X X X X X X X X X
46 X X X X X X X X X X X
48 X X X X X X X X X X X
28 X X X X X X X X X X X
30 X X X X X X X X X X X
32 X X X X X X X X X X X
34 X X X X X X X X X X X
36 X X X X X X X X X X X
38 X X X X X X X X X X X
40 X X X X X X X X X X X
42 X X X X X X X X X X X
44 X X X X X X X X X X X
46 X X X X X X X X X X X
48 X X X X X X X X X X X
GR36 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
4000-AF-6 MODEL NUMBER SPECIFICATION
SINGLE/DOUBLE DEFLECTION LAY-IN AIR FOIL BLADE
Model Neck
V4002-AF-6 Al. - Vertical Blade - Single Def. 6 8 10 12 14 16 18 20 22 24 Module
SUPPLY/RETURN GRILLES
H4002-AF-6 Al. - Horizontal Blade - Single Def. 4 X X
V4002S-AF-6 Steel - Vertical Blade - Single Def. X X
12 x 12
6
H4002S-AF-6 Steel - Horizontal Blade - Single Def. 8 X X
V4004-AF-6 Al. - Vertical Blade - Double Def. 10 X
H4004-AF-6 Al. - Horizontal Blade - Double Def. 4 X X X X X X X X
V4004S-AF-6 Steel - Vertical Blade - Double Def. X X X X X X X X
24 x 12
6
H4004S-AF-6 Steel - Horizontal Blade - Double Def. 8 X X X X X X X X
10 X
4 X X X X X X X X
6 X X X X X X X X
8 X X X X X X X X
10 X X X X X X X X
X X X X X X X X
24 x 24
12
4000-AF
14 X X X X X X X X
16 X X X X X X X X
18 X X X X X X X X
20 X X X X X X X X
22 X
4 X X X X X X X X X X
6 X X X X X X X X X X
8 X X X X X X X X X X
10 X X X X X X X X X X
48 x 24
12 X X X X X X X X X X
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
48 x 48
24 X X X X X X X X X X
26 X X X X X X X X X X
28 X X X X X X X X X X
4000-AF
30 X X X X X X X X X X
32 X X X X X X X X X X
34 X X X X X X X X X X
36 X X X X X X X X X X
38 X X X X X X X X X X
40 X X X X X X X X X X
42 X X X X X X X X X X
44 X X X X X X X X X X
GR38 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
4000-AF-6 MODEL NUMBER SPECIFICATION
SINGLE/DOUBLE DEFLECTION LAY-IN AIR FOIL BLADE
Model Neck
V4002-AF-6 Al. - Vertical Blade - Single Def. 26 28 30 32 34 36 38 40 42 44 46 Module
H4002-AF-6 Al. - Horizontal Blade - Single Def. 4 X X X X X X X X X X
SUPPLY/RETURN GRILLES
V4002S-AF-6 Steel - Vertical Blade - Single Def. 6 X X X X X X X X X X
H4002S-AF-6 Steel - Horizontal Blade - Single Def. 8 X X X X X X X X X X
V4004-AF-6 Al. - Vertical Blade - Double Def. 10 X X X X X X X X X X
H4004-AF-6 Al. - Horizontal Blade - Double Def.
48 x 24
12 X X X X X X X X X X
V4004S-AF-6 Steel - Vertical Blade - Double Def. 14 X X X X X X X X X X
H4004S-AF-6 Steel - Horizontal Blade - Double Def. 16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
22 X
4 X X X X X X X X X X
6 X X X X X X X X X X
8 X X X X X X X X X X
10 X X X X X X X X X X
4000-AF
12 X X X X X X X X X X
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
22 X X X X X X X X X X
48 x 48
24 X X X X X X X X X X
26 X X X X X X X X X X
28 X X X X X X X X X X
30 X X X X X X X X X X
32 X X X X X X X X X X
34 X X X X X X X X X X
36 X X X X X X X X X X
38 X X X X X X X X X X
40 X X X X X X X X X X
42 X X X X X X X X X X
44 X X X X X X X X X X
46 X
Ac ft CFM 24 36 48 60 72 84 96 120
06x04 0.17 NC - - - - - - 11 18
Throw 2-4-8 4-6-11 5-8-13 7-10-14 8-11-16 9-12-17 10-13-18 12-14-20
Ac ft CFM 38 57 76 95 114 133 152 190
06x06 0.25 NC - - - - - 10 13 20
Throw 4-8-17 7-12-21 10-15-24 12-17-26 14-20-28 15-21-30 17-23-32 19-24-34
08x08 Ac ft CFM 73 110 146 183 219 256 292 365
10x06 0.42 NC - - - - 11 13 16 22
12x05 Throw 3-6-14 6-10-19 9-14-22 11-17-25 14-19-27 16-21-29 18-22-31 20-25-35
Ac ft CFM 82 123 164 205 246 287 328 410
12x06 0.50 NC - - - 11 11 13 16 23
Throw 3-7-15 7-11-20 10-15-24 12-18-26 15-20-29 17-22-31 19-24-33 21-26-37
4000-AF
CONTINUED
GR40 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES 4000 PERFORMANCE DATA
MODELS H/V4002-AF, H/V4004-AF, H/V4002S-AF, H/V4004S-AF
SUPPLY/RETURN GRILLES
Ac ft CFM 244 366 488 610 732 853 975 1219
14x14 1.22 NC - 10 12 13 15 18 21 27
4000-AF
Throw 6-13-28 13-21-39 18-28-45 23-35-50 28-39-55 32-42-59 36-45-63 41-50-71
Ac ft CFM 323 485 646 808 969 1131 1292 1615
16x16 1.62 NC 11 12 13 15 17 19 22 28
Throw 6-14-29 14-22-40 19-29-47 24-36-52 29-40-57 34-44-62 38-47-66 43-52-74
DEFINITION OF UNITS
CFM Air volume is cubic feet per minute
Nk Vel Neck Velocity is the airstream velocity in the duct just before it reaches the supply outlet;
measured in feet per minute
fpm Velocity of air stream in Feet per Minute
Throw Throw distance in feet are for terminal velocities of 150 fpm, 100 fpm and 50 fpm respectively
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
Pt Total pressures in inches of water
Ac Actual Core Free Area in square feet
24x12 Ac ft CFM 364 546 727 909 1090 1272 1453 1816
36x08 1.82 NC 11 12 13 15 17 20 22 29
48x06 Throw 6-13-30 14-23-43 20-31-50 26-38-55 31-43-61 36-46-66 40-50-70 45-55-78
Ac ft CFM 414 621 87 1034 1240 1447 1653 2066
18x18 2.07 NC 12 13 14 16 18 20 23 29
Throw 7-15-33 15-25-46 22-33-53 27-41-59 33-46-65 38-49-70 43-53-75 48-59-84
Ac ft CFM 456 685 914 1142 1371 1600 1829 2386
30x12 2.28 NC 12 13 14 16 18 20 23 30
36x10 Throw 7-16-34 16-26-48 23-34-56 29-43-62 34-48-68 40-52-74 45-56-79 51-62-88
Ac ft CFM 515 772 1030 1287 1545 1802 2059 2574
20x20 2.59 NC 13 14 15 17 19 21 24 30
Throw 8-17-37 17-27-51 24-37-59 30-46-66 37-51-72 43-55-78 48-59-83 54-66-93
4000-AF
CONTINUED
GR42 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES 4000 PERFORMANCE DATA
MODELS H/V4002-AF, H/V4004-AF, H/V4002S-AF, H/V4004S-AF
SUPPLY/RETURN GRILLES
Ac ft CFM 1330 1996 2663 3329 3995 4661 5328 6660
36x28
6.65 NC 17 18 19 21 23 25 28 34
42x24
Throw 12-27-59 27-44-82 39-59-95 49-73-106 59-82-116 69-89-126 77-95-134 87-106-150
Ac ft CFM 1430 2146 2863 3579 4295 5011 5728 7160
36x30 7.15 NC 17 18 19 21 23 25 28 35
Throw 13-28-61 28-46-85 41-61-98 51-76-110 61-85-120 71-92-130 80-98-139 90-110-156
36x32 Ac ft CFM 1525 2288 3051 3814 4578 5341 6104 7630
48x24 7.63 NC 17 18 19 21 23 26 28 35
34x34 Throw 13-29-63 29-47-88 42-63-102 52-79-114 63-88-124 73-95-134 83-102-144 93-114-161
Ac ft CFM 1730 2593 3455 4318 5180 6043 6905 8630
36x36 8.65 NC 18 19 20 22 24 26 29 35
Throw 14-31-67 31-50-94 45-67-108 56-84-121 67-94-132 78-101-143 88-108-153 99-121-171
4000-AF
Ac ft CFM 1930 2894 3858 4821 5785 6749 7713 9640
38x38 9.65 NC 18 19 20 22 24 27 29 36
Throw 15-33-71 33-53-99 47-71-114 59-88-128 71-99-140 83-107-151 93-114-161 104-128-181
DEFINITION OF UNITS
CFM Air volume is cubic feet per minute
Nk Vel Neck Velocity is the airstream velocity in the duct just before it reaches the supply outlet;
measured in feet per minute
fpm Velocity of air stream in Feet per Minute
Throw Throw distance in feet are for terminal velocities of 150 fpm, 100 fpm and 50 fpm respectively
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
Pt Total pressures in inches of water
Ac Actual Core Free Area in square feet
DEFINITION OF UNITS
CFM Air volume is cubic feet per minute
Nk Vel Neck Velocity is the airstream velocity in the duct just before it reaches the supply outlet;
measured in feet per minute
fpm Velocity of air stream in Feet per Minute
Throw Throw distance in feet are for terminal velocities of 150 fpm, 100 fpm and 50 fpm respectively
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
Pt Total pressures in inches of water
Ac Actual Core Free Area in square feet
GR44 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
MODEL L
The L series of curved blade grilles and registers is an economical
solutionTag:to applications requiring ceiling or sidewall installations with METAL*AIRE
Series
directional :
air patterns. TheL-SL series is constructed of Submittal
corrosive No: L-S
SUPPLY/RETURN GRILLES
resistant aluminum.
Supply Curved Blade Ceiling Grilles / Registers
Available in single -orSingle
Aluminum double deflection
Deflection - Surface Mount
Available in 1-way,
Models: L-1 2-way, 3-way or 4-way
Single air patterns
Deflection Grille - One Way - Long Blades
S-1
Full horizontal to Single
vertical blow patternsDeflection Grille - One Way - Short Blades
LT-1 Single Deflection Grille - Two Way - Long Blades
Individually adjustable curved blades
ST-1 Single Deflection Grille - Two Way - Short Blades
LTC-1 blade orSingle
Available with opposed Deflection
multi-shutter Grille - Two Way Corner Blow Pattern
damper
LTC3-1 Single Deflection Grille - Three Way Corner Blow Pattern
LS3-1 Single Deflection Grille - Three Way Blow Pattern
LS4-1 Single Deflection Grille - Four Way Blow Pattern
Models: L-1 (One Way - Long Blades - Surface Mount)
S-1 (One Way - Short Blades - Surface Mount)
Face View ( L-1 Model ) Face View ( S-1 Model )
Curved Blades Specified Duct Size=Listed Size
Parallel to 1
Listed Size -
long dimension 2
Mounting Mounting
L
11 Hole Hole
4
5
32 11 .9
4
Listed Size + 2
5 5
8 8
Number L-S
Curved Blades
1
Parallel to Listed Size - 2
long dimension
Mounting Mounting
11
4 Hole Hole
5
32 11 .9
4
Listed Size + 2
Submittal
Models: LTC-1 (Two Way Corner Blow Pattern - Surface Mount)
LTC3-1 (Three Way Corner Blow Pattern - Surface Mount)
Specified Duct Size = Listed Size Face View ( LTC-1 Model ) Mounting Face View ( LTC3-1 Model ) Mounting
Listed Size - 2
1 Hole Hole
5
11 .9
8
4
Horizontal Curved Blades 5 5
8 8
Listed Size + 2
1
1 4 Vertical Curved Blades
Listed Size + 2 5 5
8 8
Note: Arrow shows air blow way.
ST-6 Single Deflection Grille - Two Way - Short Blades - Lay In T-Bar
LTC-6 Single Deflection Grille - Two Way Corner Blow Pattern - Lay In T-Bar
LTC3-6 Single Deflection Grille - Three Way Corner Blow Pattern - Lay In T-Bar
LS3-6 Single Deflection Grille - Three Way Blow Pattern - Lay In T-Bar
LS4-6 Single Deflection Grille - Four Way Blow Pattern - Lay In T-Bar
Models: L-6 (One Way - Long Blades - Lay In T-Bar)
S-6 (One Way - Short Blades - Lay In T-Bar)
T-Bar Module
Face View ( L-6 Model ) Face View ( S-6 Model )
Curved Blades Specified Duct Size=Listed Size
Parallel to 1
Listed Size -
long dimension 2
1
1
4
SUPPLY/RETURN GRILLES
1
1 .9
4
1
Overal Face = T-Bar Module - 4
Number L-S
2
long dimension
1
1
4
1
14 .9
1
Overall Face = T-Bar Module - 4
Submittal
LTC3-6 (Three Way Corner Blow Pattern - Lay In T-Bar)
T-Bar Module
L
11
4
5
1 41 .9 8
Horizontal Curved Blades
Overall Face = T-Bar Module - 14
1 1
4
GR46 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
Models: LM-1 (Supply Register - One Way - Long Blades)
SM-1 (Supply Register - One Way - Short Blades)
SUPPLY/RETURN GRILLES
to Curved Blades
Shutter Blade
(Blades on 1" Centers)
Curved Blades
( Horizontal )
3
18
5 1
32 14 .9
Damper Operator
Face View ( LM-1 Model ) Face View ( SM-1 Model )
Listed Size + 2
L
( Horizontal ) 7
18
5 1
32 14 .9
Listed Size + 2 Damper Operator
Face View ( LTM-1 Model ) Face View ( STM-1 Model )
5 1
22
32 17
8
1
14 Damper 5
Operator 8
.9
Face View ( LTCM-1 Model ) Face View ( LTC3M-1 Model )
Listed Size + 2
NOTE: Arrow shows air blow way.
Note: Available in sizes 6 x 6, 8 x 8, 10 x 10, 12 x 12, 14 x 14 Only.
Models: LMH-1 (Supply Register - One Way - Long Blades with Horizontal Multi-Shutter Damper)
LTMH-1 (Supply Register - Two Way - Long Blades with Horizontal Multi-Shutter Damper)
Duct Size = Listed Size Face View ( LMH-1 Model ) Face View ( LTMH-1 Model )
Listed Size - 38
5 115
16
116
5
32
1
14 5
8
Listed Size + 2
5
32
1
14 5
REGISTERS 8
Listed Size + 2
GRILLES &
Models: LS3M-1 (Supply Register - Three Way - Corner Blow Pattern with Horizontal Multi-Shutter Damper)
LS4M-1 (Supply Register - Four Way - Corner Blow Pattern with Horizontal Multi-Shutter Damper)
5 1
22
32 17
8
1 Damper Operator
14
Vertical Curved Blades
Listed Size + 2
NOTE: Arrow shows air blow way.
Note: Available in sizes 6 x 6, 8 x 8, 10 x 10, 12 x 12, 14 x 14 Only.
Models: LV-1 (One Way - Long Front Blades - Rear Horizontal Blades)
SH-1 (One Way - Short Front Blades - Rear Vertical Blades)
5 5 17
32 8 8
Models: LTV-1 (Two Way - Long Front Blades - Rear Vertical Blades)
STH-1 (Two Way - Short Front Blades - Rear Horizontal Blades)
Note: Arrow shows air blow way.
Specified Duct Size=Listed Size
Face View ( LTV-1 Model )
Listed Size - 21 Face View ( STH-1 Model )
Rear Deflection Blades
Perpendicular to Direction
Of Front Curved Blades Curved Blades
5 Parallel to
32 Short dimension
1
14 .9
Listed Size + 2 Model LTVD-1 Shown
Specified Duct Size = Listed Size
Options: OBD/OBDA 1
Listed Size - 16 Options:
1 5
14 .9 32
Listed Size + 2
GR48 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES L SPECIFICATIONS
SUPPLY CURVED BLADE ALUMINUM Performance Specification
MODELS L/S/LT/ST/LTC/LTC3/LS3/ The manufacturer shall provide published performance
LS4/LM/SM/LV/SH/LTV/STH data. Data shall be tested in accordance to ANSI/
Air inlets shall be models L/S/LT/ST/LTC/LTC3/LS3/LS4/ ASHRAE Standard 70-2006.
SUPPLY/RETURN GRILLES
L
of the device. Metal friction wires are not acceptable. The
units shall be designed for surface mounting with screw
holes in the face and for lay-in applications.
Optional opposed blade damper shall be constructed of
steel (Model OBD) or aluminum (Model OBDA).
Optional multi-shutter damper shall be provided for
models LM/SM/LTM/STM/LTCM.
Damper must be operable from the face of the register.
Model Neck
L-1 One-Way Long Blades 28 30 32 34 36 38 40 42 44 46 48
S-1 One-Way Short Blades 4 X X X X X X X X X X X
LT-1 Two-Way Long Blades 5 X X X X X X X X X X X
ST-1 Two-Way Short Blades 6 X X X X X X X X X X X
8 X X X X X X X X X X X
10 X X X X X X X X X X X
12 X X X X X X X X X X X
14 X X X X X X X X X X X
16 X X X X X X X X X X X
18 X X X X X X X X X X X
20 X X X X X X X X X X X
22 X X X X X X X X X X X
24 X X X X X X X X X X X
26 X X X X X X X X X X X
GR50 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
L MODEL NUMBER SPECIFICATION
ALUMINUM CEILING CURVED BLADE SUPPLY GRILLE SURFACE MOUNT
Model Neck
L-1 One-Way Long Blades 28 30 32 34 36 38 40 42 44 46 48
SUPPLY/RETURN GRILLES
S-1 One-Way Short Blades 28 X X X X X X X X X X X
LT-1 Two-Way Long Blades 30 X X X X X X X X X X
ST-1 Two-Way Short Blades 32 X X X X X X X X X
34 X X X X X X X X
36 X X X X X X X
38 X X X X X X
40 X X X X X
42 X X X X
44 X X X
46 X X
48 X
L
Standard OBD Steel Opposed Blade Damper
01 White OBDA Aluminum Opposed Blade Damper
Optional L9 Equalizing Grid
02 Satin Silver PF Plaster Frame
03 Black IS Insect Screen
24 Mill TR Square to Round Transition
28 Custom Color TR Deep Deep Square to Round Transition
TR Deep
Available Options
NSH No Screw Holes
CM Concealed Mounting
Model Neck
LTC-1 Two-Way Corner Blow Pattern 28 30 32 34 36 38 40 42 44 46 48
LTC-3-1 Three-Way Corner Blow Pattern 6 X X X X X X X X X X X
LS3-1 Three-Way Blow Pattern 8 X X X X X X X X X X X
LS4-1 Four-Way Blow Pattern 10 X X X X X X X X X X X
LV-1 One-Way Long Blades with Rear Vertical Blades 12 X X X X X X X X X X X
SH-1 One-Way Short Blades with Rear Horizontal Blades 14 X X X X X X X X X X X
LTV-1 Two-Way Long Blades with Rear Vertical Blades 16 X X X X X X X X X X X
STH-1 Two-Way Short Blades with Rear Horizontal Blades 18 X X X X X X X X X X X
20 X X X X X X X X X X X
22 X X X X X X X X X X X
24 X X X X X X X X X X X
26 X X X X X X X X X X X
Available Options
NSH No Screw Holes
CM Concealed Mounting
GR52 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
L MODEL NUMBER SPECIFICATION
ALUMINUM CEILING CURVED BLADE SUPPLY GRILLE SURFACE MOUNT
Model Neck
LTC-1 Two-Way Corner Blow Pattern 28 30 32 34 36 38 40 42 44 46 48
SUPPLY/RETURN GRILLES
LTC-3-1 Three-Way Corner Blow Pattern 28 X X X X X X X X X X X
LS3-1 Three-Way Blow Pattern 30 X X X X X X X X X X
LS4-1 Four-Way Blow Pattern 32 X X X X X X X X X
LV-1 One-Way Long Blades with Rear Vertical Blades 34 X X X X X X X X
SH-1 One-Way Short Blades with Rear Horizontal Blades 36 X X X X X X X
LTV-1 Two-Way Long Blades with Rear Vertical Blades 38 X X X X X X
STH-1 Two-Way Short Blades with Rear Horizontal Blades 40 X X X X X
42 X X X X
44 X X X
46 X X
48 X
L
Standard OBD Steel Opposed Blade Damper
01 White OBDA Aluminum Opposed Blade Damper
Optional L9 Equalizing Grid
02 Satin Silver PF Plaster Frame
03 Black LIPF Lay-in Plaster Frame
24 Mill IS Insect Screen
28 Custom Color TR Square to Round Transition
TR Deep Deep Square to Round Transition
Available Options
NSH No Screw Holes
CM Concealed Mounting
24 x 24
14 X X X X X X X X
16 X X X X X X X X
18 X X X X X X X X
20 X X X X X X X X
22 X
4 X X X X X X X X X X
6 X X X X X X X X X X
8 X X X X X X X X X X
10 X X X X X X X X X X
12 X X X X X X X X X X 48 x 24
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
GR54 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
L MODEL NUMBER SPECIFICATION
ALUMINUM CEILING CURVED BLADE SUPPLY GRILLE LAY-IN
Model Neck
L-6 One-Way Long Blades 6 8 10 12 14 16 18 20 22 24 Module
SUPPLY/RETURN GRILLES
S-6 One-Way Short Blades 4 X X X X X X X X X X
LT-6 Two-Way Long Blades 6 X X X X X X X X X X
ST-6 Two-Way Short Blades 8 X X X X X X X X X X
10 X X X X X X X X X X
12 X X X X X X X X X X
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
22 X X X X X X X X X X
24 X X X X X X X X X X 48 x 48
26 X X X X X X X X X X
28 X X X X X X X X X X
L
30 X X X X X X X X X X
32 X X X X X X X X X X
34 X X X X X X X X X X
36 X X X X X X X X X X
38 X X X X X X X X X X
40 X X X X X X X X X X
42 X X X X X X X X X X
44 X X X X X X X X X X
10 X X X X X X X X X X
12 X X X X X X X X X X
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
22 X X X X X X X X X X
24 X X X X X X X X X X
48 x 48
26 X X X X X X X X X X
28 X X X X X X X X X X
30 X X X X X X X X X X
32 X X X X X X X X X X
34 X X X X X X X X X X
36 X X X X X X X X X X
38 X X X X X X X X X X
40 X X X X X X X X X X
42 X X X X X X X X X X
44 X X X X X X X X X X
46 X
GR56 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
L MODEL NUMBER SPECIFICATION
ALUMINUM CEILING CURVED BLADE SUPPLY GRILLE LAY-IN
Model
LTC-6 Two-Way Corner Blow Pattern 6 8 10 12 14 16 18 20 22 24 Module
SUPPLY/RETURN GRILLES
LTC3-6 Three-Way Corner Blow Pattern 4 X
LS3-6 Three-Way Blow Pattern 6 X X
12 x 12
LS4-6 Four-Way Blow Pattern 8 X X
LV-6 One-Way Long Blades with Rear Vertical Blades 10 X
SH-6 One-Way Short Blades with Rear Horizontal Blades 4 X X X X X X X
LTV-6 Two-Way Long Blades with Rear Vertical Blades 6 X X X X X X X X
24 x 12
STH-6 Two-Way Short Blades with Rear Horizontal Blades 8 X X X X X X X X
10 X
4 X X X X X X X
6 X X X X X X X X
8 X X X X X X X X
10 X X X X X X X X
12 X X X X X X X X
L
24 x 24
14 X X X X X X X X
16 X X X X X X X X
18 X X X X X X X X
20 X X X X X X X X
22 X
4 X X X X X X X X X
6 X X X X X X X X X X
8 X X X X X X X X X X
10 X X X X X X X X X X
12 X X X X X X X X X X 48 x 24
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
30 X X X X X X X X X X
32 X X X X X X X X X X
34 X X X X X X X X X X
36 X X X X X X X X X X
38 X X X X X X X X X X
40 X X X X X X X X X X
42 X X X X X X X X X X
44 X X X X X X X X X X
GR58 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
L MODEL NUMBER SPECIFICATION
ALUMINUM CEILING CURVED BLADE SUPPLY GRILLE LAY-IN
Model Neck
LTC-6 Two-Way Corner Blow Pattern 26 28 30 32 34 36 38 40 42 44 46 Module
SUPPLY/RETURN GRILLES
LTC3-6 Three-Way Corner Blow Pattern 4 X X X X X X X X X X
LS3-6 Three-Way Blow Pattern 6 X X X X X X X X X X
LS4-6 Four-Way Blow Pattern 8 X X X X X X X X X X
LV-6 One-Way Long Blades with Rear Vertical Blades 10 X X X X X X X X X X
SH-6 One-Way Short Blades with Rear Horizontal Blades 12 X X X X X X X X X X
48 x 24
LTV-6 Two-Way Long Blades with Rear Vertical Blades 14 X X X X X X X X X X
STH-6 Two-Way Short Blades with Rear Horizontal Blades 16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
22 X
4 X X X X X X X X X X
6 X X X X X X X X X X
8 X X X X X X X X X X
L
10 X X X X X X X X X X
12 X X X X X X X X X X
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
22 X X X X X X X X X X
24 X X X X X X X X X X
48 x 48
26 X X X X X X X X X X
28 X X X X X X X X X X
30 X X X X X X X X X X
32 X X X X X X X X X X
34 X X X X X X X X X X
36 X X X X X X X X X X
38 X X X X X X X X X X
40 X X X X X X X X X X
42 X X X X X X X X X X
44 X X X X X X X X X X
46 X
4
LTM-1 Two-Way Long Blades 5 X X X X X X X X X X Optional
STM-1 Two-Way Short Blades 6 X X X X X X X X X X 02 Satin Silver
8 X X X X X X X X X 03 Black
10 X X X X X X X X 24 Mill
12 X X X X X X X 28 Custom Color
14 X X X X X X
16 X X X X X
18 X X X X
20 X X X
22 X X
24 X
L
GR60 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES L PERFORMANCE DATA
MODELS L, S, LT, ST, LTC, LTC3, LS4, LV, SH, LTV, STH
LM, SM, LTM, STM, LTCM, LTC3M, LMH, LTMH, LS3M, LS4M
SUPPLY/RETURN GRILLES
Size Nk Vel 100 150 200 250 300 350 400
Ac ft CFM 17 25 34 42 50 58 67
L
10x06
NC - - - 13 18 22 25
12x05
Throw 7-6-5-5 11-10-8-8 14-13-11-10 18-16-14-13 22-19-16-15 25-22-19-18 29-25-22-20
Ac ft CFM 50 75 100 125 150 175 200
0.50 Ps .004 .010 .018 .027 .039 .054 .070
12x06
NC - - - 13 18 22 26
Throw 7-6-5-5 10-9-7-7 13-12-10-9 16-14-12-12 20-17-15-16 23-20-17-16 26-23-20-18
Ac ft CFM 56 84 111 139 167 194 222
10x08 0.56 Ps .004 .010 .017 .028 .038 .051 .067
14x06 NC - - - 13 18 22 25
Throw 7-6-5-5 10-9-8-7 14-12-10-10 17-15-13-12 20-18-15-14 24-21-18-17 27-24-20-19
Ac ft CFM 70 104 139 174 209 243 278
10x10
0.69 Ps .004 .009 .016 .025 .036 .049 .065
12x08
NC - - - 13 18 22 26
16x06
Throw 8-7-6-6 12-11-9-8 16-14-12-11 20-18-15-14 24-21-18-17 28-25-21-20 32-28-24-22
Ac ft CFM 78 117 156 195 233 272 311
14x08 0.77 Ps .004 .009 .016 .025 .036 .049 .064
18x06 NC - - - 14 18 22 26
Throw 8-7-6-5 12-10-9-8 16-14-12-11 20-17-15-14 23-20-18-16 27-24-20-19 31-27-23-22
Ac ft CFM 83 125 166 208 250 291 333
12x10 0.83 Ps .004 .009 .016 .024 .035 .048 .063
20x06 NC - - - 14 18 22 26
Throw 8-7-6-6 12-10-9-8 16-14-12-11 20-17-15-14 24-21-18-17 28-24-21-20 32-28-24-22
CONTINUED
18x08
Throw 9-8-7-6 13-11-10-9 18-15-13-12 22-19-16-15 26-23-20-18 31-27-13-21 35-31-26-25
Ac ft CFM 125 188 250 313 375 438 500
30x06 1.25 Ps .004 .008 .015 .023 .034 .046 .060
18x10 NC - - - 14 19 23 27
Throw 9-8-7-6 14-12-11-10 19-17-14-13 24-21-18-17 28-25-21-20 33-29-25-23 38-33-28-26
Ac ft CFM 136 204 272 241 409 477 545
1.36 Ps .004 .008 .015 .023 .033 .045 .059
14x14
NC - - - 15 19 23 27
Throw 9-8-7-6 14-12-11-10 19-17-14-13 24-21-18-17 28-25-21-20 33-29-25-23 38-33-28-27
Ac ft CFM 150 225 300 375 450 525 600
36x06 1.50 Ps .004 .008 .015 .023 .033 .045 .059
18x12 NC - - - 15 19 23 27
Throw 10-9-8-7 15-13-11-10 20-18-15-14 25-22-19-18 30-27-23-21 36-31-27-25 41-36-30-28
CONTINUED
PERFORMANCE NOTES FOR SERIES L
All data is tested in accordance with ANSI/ASHRAE 70-2006.
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
fpm Velocity of air stream in Feet per Minute
Ps Static pressure = PtPv (inches of water column)
Throw Throw distance in feet are for terminal velocities of 50 fpm for 1W, 2W, 3W & 4W air flow
Nk Vel Neck Velocity is the airstream velocity in the duct just before it reaches the supply outlet;
measured in feet per minute
NC Noise Criteria based on a room absorption of 10 dB, re: 10-12 watts [ NC les than 10 (-)]
Ac Actual Core Free Area in square feet
GR62 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES L PERFORMANCE DATA
MODELS L, S, LT, ST, LTC, LTC3, LS4, LV, SH, LTV, STH
LM, SM, LTM, STM, LTCM, LTC3M, LMH, LTMH, LS3M, LS4M
SUPPLY/RETURN GRILLES
Ac ft CFM 153 230 306 383 459 536 612
1.53 Ps .004 .008 .015 .023 .033 .045 .059
22x10
NC - - - 15 20 24 27
Throw 10-9-8-7 15-13-12-11 21-18-15-14 26-22-19-18 31-27-23-22 36-31-27-25 41-36-31-29
Ac ft CFM 166 249 333 416 499 583 666
30x08 1.67 Ps .004 .008 .015 .024 .034 .046 .060
24x10 NC - - - 15 20 24 28
Throw 11-9-8-7 16-14-12-11 21-19-16-15 27-23-20-19 32-28-24-23 38-33-28-26 43-38-32-30
Ac ft CFM 178 267 356 445 533 622 711
1.78 Ps .004 .008 .014 .022 .032 .044 .057
16x16
NC - - - 15 20 24 27
L
Throw 10-9-8-7 15-13-11-10 20-18-15-14 25-22-19-18 31-27-23-21 36-31-27-25 41-36-30-28
Ac ft CFM 200 300 400 500 600 700 800
24x12 2.00 Ps .004 .008 .014 .022 .032 .044 .057
36x08 NC - - - 15 20 24 27
48x06 Throw 11-10-9-8 17-15-13-12 23-20-17-16 29-25-21-20 34-30-26-24 40-35-30-28 46-40-34-32
Ac ft CFM 224 337 449 562 675 787 900
2.25 Ps .003 .008 .014 .022 .031 .043 .056
18x18
NC - - - 15 20 24 28
Throw 11-9-8-7 16-14-12-11 22-19-16-15 27-24-20-19 32-28-24-23 38-33-28-27 43-38-32-30
Ac ft CFM 250 375 500 625 750 875 1000
30x12 2.50 Ps .004 .008 .014 .022 .032 .043 .057
36x10 NC - - - 16 21 25 28
Throw 13-11-9-9 19-17-14-13 25-22-19-18 31-28-24-22 38-33-28-26 44-39-33-31 50-44-38-35
Ac ft CFM 278 417 555 694 833 971 1110
2.78 Ps .003 .008 .014 .021 .031 .042 .055
20x20
NC - - - 16 21 25 28
Throw 11-10-9-8 17-15-13-12 23-20-17-16 29-25-21-20 34-30-26-24 40-35-30-28 46-40-34-32
Ac ft CFM 300 450 600 750 900 1050 1200
24x18 3.00 Ps .003 .008 .014 .021 .031 .042 .055
36x12 NC - - - 16 21 25 28
CONTINUED
CONTINUED
PERFORMANCE NOTES FOR SERIES L
All data is tested in accordance with ANSI/ASHRAE 70-2006.
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
fpm Velocity of air stream in Feet per Minute
Ps Static pressure = PtPv (inches of water column)
Throw Throw distance in feet are for terminal velocities of 50 fpm for 1W, 2W, 3W & 4W air flow
Nk Vel Neck Velocity is the airstream velocity in the duct just before it reaches the supply outlet;
measured in feet per minute
NC Noise Criteria based on a room absorption of 10 dB, re: 10-12 watts [ NC les than 10 (-)]
Ac Actual Core Free Area in square feet
GR64 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES L PERFORMANCE DATA
MODELS L, S, LT, ST, LTC, LTC3, LS4, LV, SH, LTV, STH
LM, SM, LTM, STM, LTCM, LTC3M, LMH, LTMH, LS3M, LS4M
SUPPLY/RETURN GRILLES
Ac ft CFM 900 1350 1800 2250 2700 3150 3600
9.00 Ps .003 .007 .013 .020 .029 .039 .051
36x36
NC - - 13 19 23 27 31
L
NC - - 14 19 24 28 31
Throw 14-12-10-10 25-22-19-18 34-30-25-24 42-37-32-30 51-44-38-35 59-52-44-41 68-59-51-47
Ac ft CFM 1200 1800 2400 3000 3600 4200 4800
12.00 Ps .003 .007 .013 .020 .029 .039 .051
48x36
NC - - 14 20 24 28 32
Throw 19-17-14-13 37-32-27-26 49-43-37-34 61-53-46-43 73-64-55-51 85-75-64-60 97-85-73-68
Ac ft CFM 1400 2100 2800 3500 4200 4800 5600
14.00 Ps .003 .007 .013 .020 .029 .039 .051
48x42
NC - - 14 20 25 29 32
Throw 19-17-14-13 39-34-29-27 52-46-39-36 65-57-49-46 78-68-59-55 91-80-68-64 104-91-78-73
Ac ft CFM 1600 2400 3200 4000 4800 5600 6400
16.00 Ps .003 .007 .013 .020 .028 .039 .050
48x48
NC - - 15 20 25 29 32
Throw 13-11-10-9 28-25-21-20 38-33-28-26 47-41-35-33 56-49-42-39 66-58-48-46 75-66-56-53
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
fpm Velocity of air stream in Feet per Minute
Ps Static pressure = PtPv (inches of water column)
Throw Throw distance in feet are for terminal velocities of 50 fpm for 1W, 2W, 3W & 4W air flow
Nk Vel Neck Velocity is the airstream velocity in the duct just before it reaches the supply outlet;
measured in feet per minute
NC Noise Criteria based on a room absorption of 10 dB, re: 10-12 watts [ NC les than 10 (-)]
Ac Actual Core Free Area in square feet
MODEL RHP
The RHP series grille is an economical one-piece stamped frame
return. It combines the advantages of corrosive resistant aluminum
construction and durability with an attractive design and solid
SUPPLY/RETURN GRILLES
performance.
Economical pricing combined with solid performance
Available Sizes
8x4 12 x 8
8x6 14 x 4
10 x 4 14 x 6
10 x 6 14 x 8
10 x 8 16 x 6
12 x 4 16 x 8
12 x 6
GR66 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES RHP SPECIFICATIONS
RETURN FIXED HORIZONTAL BLADE Performance Specification
ALUMINUM MODEL RHP The manufacturer shall provide published performance
Air inlets shall be model RHP manufactured by data. Data shall be tested in accordance to ANSI/
METALAIRE. Units shall be return or exhaust grilles of ASHRAE Standard 70-2006.
SUPPLY/RETURN GRILLES
aluminum construction with a one-piece stamped frame
and a single set of fixed deflection blades. The units Paint Specification
shall be the size and quantity as outlined in the plans Process shall be anodic electro-deposition using an
and specifications. The border shall be 1 1/4" wide with anodic acrylic paint. Units shall undergo pre-treatment
aerodynamically shaped deflector blades on 2/3" center including a pressurized spray stage using an alkaline
set at 40. The units are designed for surface mounting cleaner and a de-ionized water rinse.
applications and be provided with screw holes in the face
of the device.
Optional opposed blade damper shall be constructed of
steel (Model OBD) or aluminum (Model OBDA). Damper
must be operable from the face of the register.
RHP
RHP MODEL NUMBER SPECIFICATION
ALUMINUM STAMPED BORDER
Model Neck Available Finishes
RHP-1 Surface Mount 6 8 10 12 14 Standard
4 X X X X 01 White
6 X X X X X Optional
8 X X X X 02 Satin Silver
10 X 03 Black
12 X 24 Mill
28 Custom Color
Available Accessories
OBD Steel Opposed Blade Damper
OBDA Aluminum Opposed Blade Damper
PF Plaster Frame
NSH No Screw Holes
CM Concealed Mounting
MODEL RH
The RH series of return and exhaust grilles is available in
a selection of styles and features designed to meet todays
performance standards. The RH series is available in aluminum (RH),
SUPPLY/RETURN GRILLES
1
14
5 1
14 .666
32
5
32
1
14 .666+ 2
Listed Size Face View ( RH-1 Model )
Listed Size + 2 Face View ( RH-1 Model )
Overall Panel Size =
Module 1
Overall Panel- Size
4 =
Model: RH-6 ( Return Grille - Lay in T-Bar ) Module - 4 1
Model: RH-6 ( ReturnListed Size
Grille 3
- Lay in T-Bar )
Listed Size - 8
Listed Size Horizontal Deflection Vanes
Listed Size - 38
3
18 Horizontal Deflection Vanes
3
18 .666
1
Overall Grille=T-Bar Module - 4 .666
T-BarListed
ModuleSize - 38 x 24
= 24
Concealed T-Bar (Maximum = Module - 6")
Listed Size - 38 Horizontal
Concealed T-Bar (Maximum .666
= Module - 6") Deflection Vanes
Horizontal
.666 Deflection Vanes
REGISTERS
GRILLES &
Lay-In Filler Panel
1
Overall Panel = T-Bar Module - 16
Face View ( RH-7 Model )
Engineer:
Submittal: RH
Duct Size =
Contractor: Listed Size - 38
Date: (Maximum = Module - 4")
Horizontal Deflection Vanes
Return Grilles and Registers
SUPPLY/RETURN GRILLES
1
Extruded 1Aluminum
4 - 45 Louvered Face
Models: RH-93 Return Grille - Donn Fineline Lay in
8 T-Bar Module = 24 x 24
RH-H-1 Return Grille - Surface Mount - Hinged Core
RH-H-6 Return Grille - T-Bar Mount - Hinged Cover Face View ( RH-8 Model )
1
14
3
8
Panel Face = Module - 3
4
Horizontal Deflection Vanes
RH
Specified Duct Size= Rotating Fastener Mounting Holes
Listed Size
3 7
1 16
Listed Size - 8 5
5 8
32
1
14
.666
Model: RH-H-6 ( Aluminum Return Grille - T-Bar Mount - Hinged Core ) Face View (RH-H-6) Removable Core
Rotating Fastener Rotating Fastener
T-Bar Module
Listed Size - 38 1 7
16
.666
T-Bar Module - 41
Overall Face = T-Bar Module - 41 T-Bar Module - 41
See Page 1 For Standard T-Bar Module Size
Options:
OBD and OBDA Specified Duct Size = Listed Size
1
Listed Size - 8
OBD / OBDA 21
1
12 8
1
14 TR
TR Deep
Transition Square / Rectangular
To Round
Revision: B
2016 Metal Industries, Inc.
Date: 11/2013 Dimensions are in Inches Page: GR69
2 of 2
Metal Industries, Inc. Clearwater, FL (727) 441 - 2651 Fax (800) 865 8383 www.metalaire.com sales@metalaire.com
REGISTERS
GRILLES &
Model: RHE-1 ( Return Grille - Surface Mount ) Face View ( Model RHE-1 )
Countersunk
Specified Duct Size= Mounting Holes
Listed Size Deflection Vanes
(Horizontal)
11 1
Listed Size - 4
4
5
32
1
SUPPLY/RETURN GRILLES
14 .666
Listed Size + 2
5
8
1
14
Deflection Vanes
.666 (Horizontal) Mounting Holes
Mounting Holes
Model: RHE-1 OBD ( Return Register - Surface Mount ) Model: RHE-1 OBD ( Return Register - Hinged Core )
with Opposed Blade Damper with Opposed Blade Damper
RH
Listed Size + 2
GR70 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SUPPLY/RETURN GRILLES
RH
Model: SRH-1 ( Steel Return Grille - Surface Mount)
Face View (SRH-1 Model)
Specified Duct Size = Listed Size
3 Mounting Holes
1 Listed Size* - 38 Deflection Vanes 16
12 ( Countersunk )
5
8
1
14 .666 5
32
Listed Size* + 2
.666
Overall Panel Size = 23 34 x 23 34
T-Bar Module = 24 x 24
SERIES RH SPECIFICATIONS
RETURN FIXED HORIZONTAL BLADE Performance Specification
ALUMINUM/EXTRUDED ALUMINUM/ The manufacturer shall provide published performance
STEEL MODELS RH/RHE/SRH data. Data shall be tested in accordance to ANSI/
Air inlets shall be model RH/RHE/SRH manufactured by ASHRAE Standard 70-2006.
SUPPLY/RETURN GRILLES
GR72 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
RH MODEL NUMBER SPECIFICATION
SIDEWALL RETURN GRILLE FIXED HORIZONTAL BLADES SURFACE MOUNT
Model Neck
RH-1 Rolled Form Aluminum Sidewall Return Grille 6 8 10 12 14 16 18 20 22 24 26
SUPPLY/RETURN GRILLES
RHE-1 Extruded Aluminum Sidewall Return Grille 4 X X X X X X X X X X X
SRH-1 Steel Sidewall Return Grille 5 X X X X X X X X X X X
RH-H-1 Rolled Form Aluminum Hinged Sidewall Return Grille 6 X X X X X X X X X X X
RHE-H-1 Extruded Aluminum Hinged Sidewall Return Grille 8 X X X X X X X X X X X
SRH-H-1 Steel Hinged Sidewall Return Grille 10 X X X X X X X X X X X
12 X X X X X X X X X X X
14 X X X X X X X X X X X
16 X X X X X X X X X X X
18 X X X X X X X X X X X
20 X X X X X X X X X X X
22 X X X X X X X X X X X
24 X X X X X X X X X X X
26 X X X X X X X X X X X
RH
28 X X X X X X X X X X X
30 X X X X X X X X X X X
32 X X X X X X X X X X X
34 X X X X X X X X X X X
36 X X X X X X X X X X X
38 X X X X X X X X X X X
40 X X X X X X X X X X X
42 X X X X X X X X X X X
44 X X X X X X X X X X X
46 X X X X X X X X X X X
48 X X X X X X X X X X X
Available Options
NSH No Screw Holes
CM Concealed Mounting
28 X X X X X X X X X X X
30 X X X X X X X X X X X
32 X X X X X X X X X X X
34 X X X X X X X X X X X
36 X X X X X X X X X X X
38 X X X X X X X X X X X
40 X X X X X X X X X X X
42 X X X X X X X X X X X
44 X X X X X X X X X X X
46 X X X X X X X X X X X
48 X X X X X X X X X X X
Available Options
NSH No Screw Holes
CM Concealed Mounting
GR74 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
RH MODEL NUMBER SPECIFICATION
SIDEWALL RETURN GRILLE FIXED HORIZONTAL BLADES LAY-IN
Model Neck
RH-6 Rolled Form Aluminum Sidewall Return Grille 6 8 10 12 14 16 18 20 22 24 Module
SUPPLY/RETURN GRILLES
RHE-6 Extruded Aluminum Sidewall Return Grille 4 X X
RH-H-6 Rolled Form Aluminum - Hinged Face 6 X X
12 x 12
RHE-H-6 Extruded Aluminum - Hinged Face 8 X X
10 X
4 X X X X X X X X
6 X X X X X X X X
24 x 12
8 X X X X X X X X
10 X
4 X X X X X X X X
6 X X X X X X X X
8 X X X X X X X X
10 X X X X X X X X
12 X X X X X X X X
RH
24 x 24
14 X X X X X X X X
16 X X X X X X X X
18 X X X X X X X X
20 X X X X X X X X
22 X
4 X X X X X X X X X X
6 X X X X X X X X X X
8 X X X X X X X X X X
10 X X X X X X X X X X
12 X X X X X X X X X X 36 x 24
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
GR76 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
RH MODEL NUMBER SPECIFICATION
SIDEWALL RETURN GRILLE FIXED HORIZONTAL BLADES LAY-IN
Model Neck
RH-6 Rolled Form Aluminum Sidewall Return Grille 6 8 10 12 14 16 18 20 22 24 Module
SUPPLY/RETURN GRILLES
RHE-6 Extruded Aluminum Sidewall Return Grille 4 X X X X X X X X X X
RH-H-6 Rolled Form Aluminum - Hinged Face 6 X X X X X X X X X X
RHE-H-6 Extruded Aluminum - Hinged Face 8 X X X X X X X X X X
10 X X X X X X X X X X
12 X X X X X X X X X X
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X 36 x 36
20 X X X X X X X X X X
22 X X X X X X X X X X
24 X X X X X X X X X X
26 X X X X X X X X X X
28 X X X X X X X X X X
RH
30 X X X X X X X X X X
32 X X X X X X X X X X
4 X X X X X X X X X X
6 X X X X X X X X X X
8 X X X X X X X X X X
10 X X X X X X X X X X
12 X X X X X X X X X X 48 x 24
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
30 X X X X
32 X X X X
34 X
4 X X X X X X X X X X
6 X X X X X X X X X X
8 X X X X X X X X X X
10 X X X X X X X X X X
12 X X X X X X X X X X
48 x 24
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
22 X
GR78 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
RH MODEL NUMBER SPECIFICATION
SIDEWALL RETURN GRILLE FIXED HORIZONTAL BLADES LAY-IN
Model Neck
RH-6 Rolled Form Aluminum Sidewall Return Grille 6 8 10 12 14 16 18 20 22 24 Module
SUPPLY/RETURN GRILLES
RHE-6 Extruded Aluminum Sidewall Return Grille 4 X X X X X X X X X X
RH-H-6 Rolled Form Aluminum - Hinged Face 6 X X X X X X X X X X
RHE-H-6 Extruded Aluminum - Hinged Face 8 X X X X X X X X X X
10 X X X X X X X X X X
12 X X X X X X X X X X
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
22 X X X X X X X X X X
24 X X X X X X X X X X 48 x 48
26 X X X X X X X X X X
28 X X X X X X X X X X
RH
30 X X X X X X X X X X
32 X X X X X X X X X X
34 X X X X X X X X X X
36 X X X X X X X X X X
38 X X X X X X X X X X
40 X X X X X X X X X X
42 X X X X X X X X X X
44 X X X X X X X X X X
30 X X X X X X X X X X
32 X X X X X X X X X X
34 X X X X X X X X X X
36 X X X X X X X X X X
38 X X X X X X X X X X
40 X X X X X X X X X X
42 X X X X X X X X X X
44 X X X X X X X X X X
46 X
GR80 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
RH MODEL NUMBER SPECIFICATION
SIDEWALL RETURN GRILLE FIXED HORIZONTAL BLADES LAY-IN
Model Neck
RH-7 Aluminum Concealed Spline Ceiling 6 8 10 12 14 16 18 20 Module
SUPPLY/RETURN GRILLES
RH-8 Aluminum Tegular Ceiling 4 X X X X X X X X
RH-9 Aluminum Donn Fineline/Bolt Slot Ceiling 6 X X X X X X X X
8 X X X X X X X X
10 X X X X X X X X
12 X X X X X X X X 24 x 24
14 X X X X X X X X
16 X X X X X X X X
18 X X X X X X X X
20 X X X X X X X X
RH
Optional L9 Equalizing Grid
02 Satin Silver
03 Black
24 Mill
28 Custom Color
24 x 24
14 X X X X X X X X
16 X X X X X X X X
18 X X X X X X X X
20 X X X X X X X X
22 X
4 X X X X X X X X X X
6 X X X X X X X X X X
8 X X X X X X X X X X
10 X X X X X X X X X X
12 X X X X X X X X X X 48 x 24
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
GR82 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
RH MODEL NUMBER SPECIFICATION
SIDEWALL RETURN GRILLE FIXED HORIZONTAL BLADES LAY-IN
Model Neck
SRH-6 Steel Sidewall Return Grille 26 28 30 32 34 36 38 40 42 44 46 Module
SUPPLY/RETURN GRILLES
SRH-H-6 Steel - Hinged Face 4 X X X X X X X X X X
6 X X X X X X X X X X
8 X X X X X X X X X X
10 X X X X X X X X X X
12 X X X X X X X X X X
48 x 24
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
22 X
RH
01 White OBDA Aluminum Opposed Blade Damper
Optional L9 Equalizing Grid
02 Satin Silver TBPF T-bar Plaster Frame
03 Black IS Insect Screen
28 Custom Color TR Square to Round Transition
TR Deep Deep Square to Round Transition
Nk Vel 200 300 400 500 600 700 800 900 1000
Size Duct Area ft
Ps -.005 -.011 -.020 -.031 -.045 -.061 -.080 -.101 -.125
SUPPLY/RETURN GRILLES
12x08 NC - 14 18 21 24 27 29 32 34
CFM 139 208 278 347 417 486 556 625 694
10x10 .69
NC 10 14 18 21 24 27 29 32 34
12x10 CFM 167 250 333 417 500 583 667 750 833
.83
20x06 NC 10 15 19 22 25 28 30 32 35
24x06 CFM 200 300 400 500 600 700 800 900 1000
1.00
12x12 NC 11 16 20 23 26 28 31 33 35
CFM 233 250 467 583 7800 817 933 1050 1167
14x12 1.16
NC 12 16 20 24 26 29 32 34 36
18x10 CFM 250 375 500 625 750 875 1000 1125 1250
1.25
30x06 NC 12 17 21 24 27 29 32 34 36
CFM 272 408 544 681 817 953 1089 1225 1361
14x14 1.36
NC 13 17 21 24 27 30 32 35 37
18x12 CFM 300 450 600 750 900 1050 1200 1350 1500
1.50
36x06 NC 13 189 21 25 28 30 33 35 37
24x10 CFM 333 500 667 833 1000 1167 1333 1500 1667
1.67
30x08 NC 13 18 22 25 28 31 33 34 38
18x14 CFM 350 525 700 875 1050 1225 1400 1575 1750
1.75
42x06 NC 14 18 22 25 28 31 33 36 38
18x16 CFM 400 600 800 1000 1200 1400 1600 1800 2000
2.00
24x12 NC 14 19 23 26 29 32 34 36 38
CFM 450 675 900 1125 1350 1575 1800 2025 2250
18x18 2.25
NC 15 19 23 26 29 32 34 37 39
CONTINUED
GR84 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES RH PERFORMANCE DATA
MODELS RH, RHP, RHE, SRH, RH-H, SRH-H
Nk Vel 200 300 400 500 600 700 800 900 1000
Size Duct Area ft
Ps -.005 -.011 -.020 -.031 -.045 -.061 -.080 -.101 -.125
SUPPLY/RETURN GRILLES
CFM 500 750 1000 1250 1500 1750 2000 2250 2500
30x12 2.50
NC 15 20 24 27 30 32 35 37 39
CFM 556 833 1111 1389 1667 1944 2222 2500 2778
20x20 2.78
NC 16 20 24 27 30 33 35 38 40
24x18 CFM 600 900 1200 1500 1800 2100 2400 2700 3000
3.00
36x12 NC 16 21 24 28 31 33 36 38 40
CFM 672 1008 1344 1681 2017 2353 2689 3025 3361
22x22 3.36
NC 17 21 25 28 31 34 36 39 41
36x14 CFM 700 1050 1400 1750 2100 2450 2800 3150 3500
3.50
42x12 NC 17 21 25 28 31 34 36 39 41
RH
CONTINUED
CFM 733 1100 1467 1833 2200 2567 2933 3300 3667
24x22 3.67
NC 17 21 25 29 31 34 37 39 41
CFM 750 1125 1500 1875 2250 2625 3000 3375 3750
30x18 3.75
NC 17 22 25 29 32 34 37 39 41
48x12 CFM 800 1200 1600 2000 2400 2800 3200 3600 4000
4.00
24x24 NC 17 22 26 29 32 35 37 39 41
CFM 833 1250 1667 2083 2500 2917 3333 3750 4167
30x20 4.17
NC 17 22 26 29 32 35 37 39 42
CFM 900 1350 1800 2250 2700 3150 3600 4050 4500
36x18 4.50
NC 18 22 26 29 32 35 37 40 42
36x20 CFM 1000 1500 2000 2500 3000 3500 4000 4500 5000
5.00
30x24 NC 18 23 27 30 33 35 38 40 42
RH
CFM 1050 1575 2100 2625 3150 3675 4200 4725 5250
42x18 5.25
NC 18 23 27 30 33 36 38 40 43
CFM 1089 1633 2178 2722 3267 3811 4356 4900 5444
28x28 5.44
NC 19 23 27 30 33 36 38 41 43
CFM 1100 1650 2200 2750 3300 3850 4400 4950 5500
36x22 5.50
NC 19 23 27 30 33 36 38 41 43
48x18 CFM 1200 1800 2400 3000 3600 4200 4800 5400 6000
6.00
36x24 NC 19 24 27 31 34 36 39 41 43
48x24 CFM 1600 2400 3200 4000 4800 5600 6400 7200 8000
8.00
36x32 NC 20 25 29 32 35 38 40 42 44
36x20 CFM 2000 3000 4000 5000 6000 7000 8000 9000 10000
10.00
30x24 NC 21 26 30 33 36 38 41 43 45
CFM 2006 3008 4011 5014 6017 7019 8022 9025 10028
38x38 10.03
NC 21 26 30 33 36 39 41 43 45
CFM 2100 3150 4200 5250 6300 7350 8400 9450 10500
42x36 10.50
NC 21 26 30 33 36 39 41 43 46
CFM 2172 3258 4344 5431 6517 7603 8689 9775 10861
46x34 10.86
NC 22 26 30 33 36 39 41 44 46
CFM 2217 3325 4433 5542 6650 7758 8867 9975 11083
42x38 11.08
NC 22 26 30 33 36 39 41 44 46
CFM 2222 3333 4444 5556 6667 7778 8889 10000 11111
40x40 11.11
NC 22 26 30 33 36 39 41 44 46
CONTINUED
GR86 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES RH PERFORMANCE DATA
MODELS RH, RHP, RHE, SRH, RH-H, SRH-H
Nk Vel 200 300 400 500 600 700 800 900 1000
Size Duct Area ft
Ps -.009 -.020 -.036 -.056 -.081 -.110 -.143 -.181 -.223
SUPPLY/RETURN GRILLES
CFM 2400 3600 4800 6000 7200 8400 9600 1080 12000
48x36 12.00
NC 22 27 30 34 37 39 42 44 46
CFM 2450 3675 4900 6125 7350 8575 9800 11025 12250
42x42 12.25
NC 22 27 30 34 37 39 42 44 46
CFM 2689 4033 5378 6722 3067 9411 10756 12100 13444
44x44 13.44
NC 23 27 31 34 37 40 42 45 47
CFM 2939 4408 5878 7347 8817 10286 11756 13225 14694
46x46 14.69
NC 23 27 31 35 37 40 43 45 47
CFM 3200 4800 6400 8000 9600 11200 12800 14400 16000
48x48 16.00
NC 23 28 32 35 38 41 43 45 47
PERFORMANCE NOTES FOR SERIES RH, RHP, RHE, SRH, RH-H, SRH-H
RH
All data is tested in accordance with ANSI/ASHRAE 70-2006.
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Velocity Velocity of air stream in Feet per Minute
Ps Static pressure = PtPv (inches of water column)
NC Noise criterion, Sound pressure level. NC ratings are based on sound power level (lw)
RE: 10-12 watts minus a 10dB room attenuation in all octave bands.
Nk Vel Neck velocity of air stream in Feet Per Minute
MODEL 4002R
The 4000R series return grilles is designed to match
the 4000 series supply grilles. They are available in
aluminum (4002R) and steel (4002RS) construction.
SUPPLY/RETURN GRILLES
Model: H4002R-1 ( Sidewall Return Grille - Surface Mount ) Face View ( H4002R-1 )
( Horizontal Fixed Blades )
Listed Size 3
Overall Height = 16
5 1 5/8
Neck Size = Listed Size - 3 32 Listed Height + 134
Countersunk
4002R
8 Mounting Holes
Cross Bar
13
8 Horizontal
Deflection Blade
Overall Size = Listed size + 134 1
Overall Length =
Listed Size + 134
Model: V4002R-1 ( Sidewall Return Grille - Surface Mount )
( Vertical Fixed Blades ) Face View ( V4002R-1 )
Listed Size
3
Neck Size = 16
Overall Height = Countersunk
5
Listed Size - 3
8 32
1 5/8 Mounting Holes
Listed Height + 134
1
2
Cross Bar
13
8 Horizontal 1
Overall Length =
Overall Size = Listed size + 134 Deflection Blade
Listed Size + 134
Model: 4002R-6 ( Ceiling Return Grille - Lay In T-Bar ) Face View ( V4002R-6 ) Face View ( H4002R-6 )
( V-Vertical Or H-Horizontal Fixed Blades)
Panel
Model: V4002R-1 Or H4002R-1 (Sidewall Return Register) Model: V4002R-6 Or H4002R-6 (Ceiling Return Register - Lay In T-Bar)
(V-Vertical Or H-Horizontal Fixed Blades) (V-Vertical Or H-Horizontal Fixed Blades)
( With Opposed Blade Damper ) (With Opposed Blade Damper )
GR88 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
Model: H4002RS-1 ( Sidewall Return Grille - Fixed Vertical Blades )
Listed Size Face View (Horizontal Blades)
1
Listed Size - 2
13
4
3
16 Mounting Holes
Countersunk
SUPPLY/RETURN GRILLES
5 1 Horizontal
32 14
Deflection Blade
9
16
5 1
14 .666 13
4
32 9 .666
16
4002R
Face View (Vertical Blades)
Listed Size = T-Bar Module Vertical
Deflection Blades
Listed Size - 215
16
1
34
13
4
5 1
32 14 .666 .666
Overall Face = Listed Size - 41"
Model: V4002RS-6 ( Ceiling Return Grille - Lay In T-Bar ) Face View (Horizontal Blades)
( Fixed Horizontal Blades )
Listed Size = T-Bar Module
Horizontal
Listed Size - 215
16 Deflection Blades
13
4
5 1
32 14 Blades View
Overall Face = Listed size - 41"
GR90 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
4000 MODEL NUMBER SPECIFICATION
SIDEWALL RETURN GRILLE SURFACE MOUNT
Model Neck
V4002R-1 Al. - Vertical Blade 6 8 10 12 14 16 18 20 22 24 26
SUPPLY/RETURN GRILLES
H4002R-1 Al. - Horizonta Blade 4 X X X X X X X X X X X
V4002RS-1 Steel - Vertical Blade 5 X X X X X X X X X X X
H4002RS-1 Steel - Horizontal Blade 6 X X X X X X X X X X X
8 X X X X X X X X X X X
10 X X X X X X X X X X X
12 X X X X X X X X X X X
14 X X X X X X X X X X X
16 X X X X X X X X X X X
18 X X X X X X X X X X X
20 X X X X X X X X X X X
22 X X X X X X X X X X X
24 X X X X X X X X X X X
26 X X X X X X X X X X X
4002R
28 X X X X X X X X X X X
30 X X X X X X X X X X X
32 X X X X X X X X X X X
34 X X X X X X X X X X X
36 X X X X X X X X X X X
38 X X X X X X X X X X X
40 X X X X X X X X X X X
42 X X X X X X X X X X X
44 X X X X X X X X X X X
46 X X X X X X X X X X X
48 X X X X X X X X X X X
28 X X X X X X X X X X X
30 X X X X X X X X X X X
32 X X X X X X X X X X X
34 X X X X X X X X X X X
36 X X X X X X X X X X X
38 X X X X X X X X X X X
40 X X X X X X X X X X X
42 X X X X X X X X X X X
44 X X X X X X X X X X X
46 X X X X X X X X X X X
48 X X X X X X X X X X X
GR92 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
4000 MODEL NUMBER SPECIFICATION
SIDEWALL RETURN GRILLE LAY-IN
Model Neck
V4002R-6 Al. - Vertical Blade 6 8 10 12 14 16 18 20 22 24 Module
SUPPLY/RETURN GRILLES
H4002R-6 Al. - Horizontal Blade - Single Def. 4 X X
V4002RS-6 Steel - Vertical Blade - Single Def. 6 X X
12 x 12
H4002RS-6 Steel - Horizontal Blade - Single Def. 8 X X
10 X
4 X X X X X X X X
6 X X X X X X X X
24 x 12
8 X X X X X X X X
10 X
4 X X X X X X X X
6 X X X X X X X X
8 X X X X X X X X
10 X X X X X X X X
12 X X X X X X X X
4002R
24 x 24
14 X X X X X X X X
16 X X X X X X X X
18 X X X X X X X X
20 X X X X X X X X
22 X
4 X X X X X X X X X X
6 X X X X X X X X X X
8 X X X X X X X X X X
10 X X X X X X X X X X
48 x 24
12 X X X X X X X X X X
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
48 x 48
24 X X X X X X X X X X
26 X X X X X X X X X X
28 X X X X X X X X X X
4002R
30 X X X X X X X X X X
32 X X X X X X X X X X
34 X X X X X X X X X X
36 X X X X X X X X X X
38 X X X X X X X X X X
40 X X X X X X X X X X
42 X X X X X X X X X X
44 X X X X X X X X X X
GR94 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
4000 MODEL NUMBER SPECIFICATION
SIDEWALL RETURN GRILLE LAY-IN
Model Neck
V4002R-6 Al. - Vertical Blade 26 28 30 32 34 36 38 40 42 44 46 Module
H4002R-6 Al. - Horizontal Blade - Single Def. 4 X X X X X X X X X X
SUPPLY/RETURN GRILLES
V4002RS-6 Steel - Vertical Blade - Single Def. 6 X X X X X X X X X X
H4002RS-6 Steel - Horizontal Blade - Single Def. 8 X X X X X X X X X X
10 X X X X X X X X X X
12 X X X X X X X X X X
48 x 24
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
22 X
4 X X X X X X X X X X
6 X X X X X X X X X X
8 X X X X X X X X X X
10 X X X X X X X X X X
4002R
12 X X X X X X X X X X
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
22 X X X X X X X X X X
24 X X X X X X X X X X
48 x 48
26 X X X X X X X X X X
28 X X X X X X X X X X
30 X X X X X X X X X X
32 X X X X X X X X X X
34 X X X X X X X X X X
36 X X X X X X X X X X
38 X X X X X X X X X X
40 X X X X X X X X X X
42 X X X X X X X X X X
44 X X X X X X X X X X
46 X
16x06 CFM 56 111 167 222 278 334 389 445 501
.67
12x08 NC - - 12 19 25 29 33 37 40
24x06 CFM 85 170 255 339 424 509 594 678 763
1.00
12x12 NC - - 13 21 27 31 35 39 42
CFM 104 208 311 415 518 622 725 829 932
14x12 1.16
NC - - 14 22 27 32 36 40 43
CFM 122 244 366 488 610 731 853 975 1097
14x14 1.36
NC - - 15 22 28 33 37 40 43
24x12 CFM 182 364 545 727 909 1090 1273 1453 1635
2.00
18x16 NC - - 17 24 30 35 39 42 45
CFM 206 413 620 826 1033 1240 1447 1653 1860
18x18 2.25
NC - - 17 25 30 35 39 43 46
CFM 278 557 835 1114 1392 1671 1949 2228 2506
24x18 3.00
NC - 12 19 26 32 36 40 44 47
48x12 CFM 368 738 1107 1478 1846 2216 2585 2955 3324
4.00
24x24 NC - 12 20 27 33 38 42 45 48
CFM 390 781 1173 1564 1955 2346 2738 3129 3520
30x20 4.17
NC - 13 20 28 33 38 42 45 48
36x20 CFM 469 940 1412 1883 2355 2826 3297 3769 4240
5.00
30x24 NC - 14 21 28 34 39 43 46 49
CFM 520 1040 1560 2080 2600 3120 3640 4160 4680
36x22 5.50
NC - 14 21 29 34 39 43 47 50
48x18 CFM 566 1132 1698 2264 2831 3397 3963 4529 5095
6.00
36x24 NC - 14 22 29 35 40 44 47 50
48x24 CFM 760 1523 2287 3050 3813 4576 5340 6103 6866
8.00
36x32 NC - 15 23 30 36 41 45 48 51
CONTINUED
GR96 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES 4002R PERFORMANCE DATA
MODELS H4002R, V4002R, H4002S,V4002RS
Nk Vel 100 200 300 400 500 600 700 800 900
Size Duct Area ft
Ps -0.002 -0.009 -0.020 -0.035 -0.055 -0.080 -0.109 -0.142 -0.180
SUPPLY/RETURN GRILLES
48x30 CFM 960 1920 2880 3840 4800 5760 6720 7680 8640
10.00
42x34 NC - 15 24 31 37 42 46 49 52
CFM 1160 2316 3473 4629 5785 6941 8098 9254 10410
48x36 12.00
NC - 16 25 32 38 43 47 50 53
CFM 1290 2578 3865 5153 6440 7728 9015 10303 11590
48x40 13.33
CFM 1550 3100 4650 6200 7750 9300 10850 12400 13950
48x48 16.00
NC - 17 26 33 39 44 48 51 54
4002R
All data is tested in accordance with ANSI/ASHRAE 70-2006.
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Ps Static pressure = PtPv (inches of water column)
Nk Vel Neck velocity of air stream in Feet Per Minute
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) RE: 10-12 watts minus a 10dB room attenuation in all octave bands.
MODEL CC
The CC series cubed core return and exhaust grilles is designed with
high free area and low sound and pressure drops. The CC5 series is
ideal for applications with size restrictions or as a pressurized ceiling
SUPPLY/RETURN GRILLES
return.
Project: The CC series is available in grid sizes 1/2" x 1/2" x 1/2"
(CC5),
Tag: 1/2" x 1/2" x1" (CC15) and 1" x 1" x1" (CC1).
Engineer:
Aluminum construction
Contractor:
Optional stainless steel construction
Date:
Submittal: CC5
Sidewall
Optional /steel
Ceiling
frameReturn Grillescore
with aluminum and Registers
(CC5S)
Extruded Aluminum - 1/2" x 1/2" x 1/2" Core
Available with removable core (CC5R)
Models: CC5-1 Sidewall / Ceiling Return Grille - Surface Mount
CC5-6 Ceiling Return Grille - Lay in T-Bar
CC5-7 Sidewall / Ceiling Return Grille - Concealed Spline
CC5-8 Sidewall / Ceiling Return Grille - Tegular Lay In T-Bar
3
Listed Size +1 4
Model: CC5-1 ( Sidewall / Ceiling Return Grille - Surface Mount )
5 Listed Size - 41 1 38
CC
1 1 1
2x 2x 2
32
Cube Core
1 41 x x Cube Core
1
5 1 41 x x Cube Core x 21 x 21
2
32
Cube Core
Face View
Hangar (4X)
Model: CC5-7 ( Sidewall / Ceiling Return Grille - Concealed T-Bar )
T-Bar Module = 24 x 24
Listed Size - 41 Concealed
T-Bar 1 1 1
2x 2x 2
(18 x 18 or Smaller)
Hangar
1 38 Cube Core
x x Cube Core Lay-In Filler Panel
Overall Panel = T-Bar Module - 1
16
Face View
T-Bar Module = 24 x 24
Overall Diffuser = T-Bar Module - 1
4
Listed Size - 41 1
x 21 x 21
2
(18 x 18 or Smaller)
Cube Core
Filler Panel
1 38
SUPPLY/RETURN GRILLES
2 Standard T-Bar Spacing - 1
4
Extruded Aluminum T-Bar5(By Others)
1
Channel 2Frame (All Around) 8
Model:CC5-TBC-6
Model: CC5R-6 1( Ceiling Return
( Sidewall Grille
Return - Lay
Grille ininT-Bar
- Lay T-Bar) -Removable Core)
Channel Frame
2
Extruded Aluminum 1
Standard T-Bar Spacing - 4 T-Bar (By Others)
Overall Dimension
Channel = T-Bar Module - 1
1 Frame (All Around) 4 5
T-Bar (By Other) 2 Listed Size - 1 8
4 13
Model: CC5R-6 ( Ceiling Return Grille - Lay in T-Bar ) Removable8Core
1
2
5 Extruded
Overall
14 Aluminum
1 Dimension
x x=T-Bar
Cube Module 1
Core -T-Bar (By Others)
32 Channel Frame (All Around) 4
T-Bar (By Other) 1
Listed Size - 4
1 38
Model: CC5R-6 ( Ceiling Return Grille - Lay in T-Bar ) Removable Core
Model: CC5-9
5 ( Sidewall 1Return Grille - Donn Fineline
1
Lay in )
Overall x
1 4 Dimension x Cube
= T-Bar Core
Module -4
32
1
T-Bar (By Other) Overall Panel =1 T-Bar Spacing - 4
Listed Size - 4
1 1 38
CC
Listed Size - 4
(20 x 20 or Smaller) 1 38
Model: CC5-9
5 ( Sidewall
Lay-In
1 Return Grille - Donn Fineline Lay in )
Filler Panel
14 x x Cube Core
32
1
Overall Panel = T-Bar Spacing - 4
x x Cube
1 Core
Listed Size - 4
23 3x x2023or3Smaller)
(20 Overall Face 1 38
Model: CC5-9 Lay-In
( Sidewall Return Grille 4- Donn
Filler Panel 4 Fineline Lay in )
1
Overall Panel = T-Bar Spacing - 4
xSize
Listed x-1 Cube Core
4
(20 x 20 1 38
Lay-In Filler Panel
3 or Smaller)
3
23 4 x 23 4 Overall Face
x x Cube Core
23 3 3
4 x 23 4 Overall Face
32 Cube Core
11 1 x 1 x 1 Cube Core
Model: CC1-1 ( Side wall /4Ceiling Return Grille - Surface Mount )
Listed Size + 1 7 5 Face View
8 8
Duct Size = Listed Size
Model: CC1-6 ( Ceiling Return Grille - Lay
Listed Size in
- 1 T-Bar ) 1 38 1x1x1
5 4
32 Cube Core
81 8
Listed Neck Size - 4 1 38 1x1x1
Cube Core
Model: CC1-6 ( Ceiling Return Grille - Lay in T-Bar )
T-Bar Module = 24 x 24
Concealed 1
Listed Size - 4 Face View
T-Bar
(18 x 18 or Smaller) 1x1x1
1 38
Model: Hangar
CC1-7 ( Side wall / Ceiling Return Grille - Concealed T-Bar ) Cube Core
Hangar (4X)
CC
1x1x1 Lay-In
Cube Core Filler Panel
T-Bar Module = 24 x 24
Concealed Overall Panel = T-Bar Module 1
- 16
1 Face View
T-Bar Listed Size - 4
(18 x 18 or Smaller) 1x1x1
1 38
Hangar Cube Core
1x1x1 Lay-In
Cube Core Filler Panel
1
Overall Panel = T-Bar Module - 16 Face View
Revision: A Date: 11/2013 Dimensions are in Inches Page: 1 of 2
Metal Industries, Inc. Clearwater, FL (727) 441 - 2651 Fax (800) 865 8383 www.metalaire.com sales@metalaire.com
Model: CC1-8 ( Side wall / Ceiling Return Grille - Tegular Lay in T-Bar )
T-Bar Module = 24 x 24
1
Overall Diffuser = T-Bar Module - 4
1
Revision: A Date: 11/2013 Listed Size - 4 Dimensions are in Inches Page: 1 of 2
1 38 1x1x1
Metal Industries, Inc. Clearwater,(18
FL x (727)
18 or441
Smaller)
- 2651 Fax (800) 865 8383 www.metalaire.com sales@metalaire.com
Cube Core
Model: CC1-TBC (Side wall Return Grille) Model: CC1-9 ( Side wall Return Grille - Donn Fineline Lay in )
( Lay in T-Bar - Channel Frame )
1
Overall Panel = T-Bar Spacing - 4
1
Standard T-Bar Spacing - 4 1 x 1 x 1 Cube Core
1
Listed Size - 4
1 11 1 38
8 (18 x 18 or Smaller)
Extruded Aluminum
Channel Frame (All Around) T-Bar (By Others) Lay-In Filler Panel 1 x 1 x 1 Cube Core
23 3 3
4 x 23 4 Overall Face
GR100 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
Tag:
Submittal: CC15
Date:
Engineer: / Ceiling Return Grilles and Registers
Sidewall
Aluminum
Contractor: - 1/2" x 1/2" x 1" Cube Core Submittal: CC15
REGISTERS
GRILLES &
Date:
Models: CC15-1 Sidewall / Ceiling Return Grille - Surface Mount
SidewallCC15-6
/ Ceiling Return
Ceiling Grilles and
Return Grille Registers
- Lay in T-Bar
Aluminum - 1/2" x 1/2"
CC15-7 x 1"
Sidewall CubeReturn
/ Ceiling CoreGrille - Concealed Spline
Models: CC15-8
CC15-1 Sidewall
Sidewall // Ceiling
Ceiling Return
Return Grille
Grille -- Tegular Lay in T-Bar
Surface Mount
CC15-6 Ceiling Return Grille - Lay in T-Bar
Model: CC15-1 ( Sidewall / Ceiling Return Grille - Surface Mount ) Face View
CC15-7 Sidewall / Ceiling Return Grille - Concealed Spline
CC15-8 Sidewall / Ceiling Return Grille - Tegular Lay in T-Bar
Duct Size = Listed Size
1 3
Model: CC15-1 5( Sidewall / Ceiling Listed
ReturnSize -Grille
4 - Surface Mount )1 8 1/2 x 1/2 x 1
Face View
32 Cube Core
SUPPLY/RETURN GRILLES
x1
1 41 Cube
8
1 Core
Listed Size - 4 1 38 1/2 x 1/2 x 1
5
32 Cube
Listed Core
Size + 1 34
5
Model: CC15-6 ( Ceiling Return
1 Grille - Lay in
x T-Bar
x1 ) 8
14 Cube Core
Face View
1 1
Overall Dimension = T-Bar Module - 4
1
8 T-Bar Size + 1- 43
ListedModule
CC
11 12
3/4x x1211 3/4 24 x 12 483/4
23 3/4 x 11 x 12 48 x3/4
47 24x 11 3/4 24 x 24 23 3/4 x 23 3/4
Overall Dimension
11 3/4 x 11 3/4 23 3/4 x 11 3/4 47 3/4 x 11 3/4 47 3/4 x 23 3/4 23 3/4 x 23 3/4
Model: CC15-7 ( Sidewall / Ceiling Return Grille - Concealed T-Bar ) Face View
T-Bar Module = 24 x 24
Listed Size - 41 1/4 Turn Latch
Model: CC15-7 ( Sidewall / Ceiling Return Grille - Concealed T-Bar ) On
Locks Face View
(18 x 18 or Smaller)
Concealed T-Bar Concealed 1/2 x 1/2 x 1
T-Bar Module = 24 x 24 T-Bar Cube Core
1 38
Listed Size - 41 1/4 Turn Latch
(18 x 18 or Smaller) Locks On
xx1 Concealed
Lay-InT-Bar Concealed
Cube Core 1/2 x 1/2 x 1
Filler Panel T-Bar
1 38 Cube Core
Overall Panel = T-Bar Module - 1
16
xx1 Lay-In
Cube Core Filler Panel
Model: CC15-8 ( Sidewall /Overall
CeilingPanelReturn Grille- - Tegular
= T-Bar Module 1 Lay in T-Bar )
16
Face View
T-Bar Module = 24 x 24
Overall Diffuser = T-Bar Module - 1
4
Model: CC15-8 ( Sidewall / Ceiling Return Grille
1
- Tegular Lay in T-Bar )
Listed Size - 4
Face View
(18 x 18 or Smaller)
T-Bar Module = 24 x 24 1 38
1 1/2 x 1/2 x 1
Overall Diffuser = T-Bar Module - 4 Cube Core
Listed Size - 41
(18 x 18 or Smaller)
xx1 1 38 Lay-In
Cube Core Filler Panel 3 1/2 x 1/2 x 1
8 Cube Core
22 7 x 22 7 Overall Face
8 8
xx1 Lay-In
Revision: A Date: 11/2013 Cube Core Dimensions
Filler Panel 3 are in Inches Page: 1 of 2
8
7
22 FL 7
x 22(727)
Overall Face
Metal Industries, Inc. Clearwater,
8 8 441 - 2651 Fax (800) 865 8383 www.metalaire.com sales@metalaire.com
xx1 Lay-In
Cube Core Filler Panel
Overall Panel = T-Bar Module - 1
16
Contractor:
xx1
Submittal:
Lay-In
CC15
Date: Cube Core 3
Filler Panel
Sidewall / Ceiling Return Grilles
22 7 x 22 7 And Registers
Overall Face
8
8 8
Aluminum - 1/2" x 1/2" x 1" Cube Core
Revision: Date: Sidewall
Models: A CC15-TBC-6 11/2013/ Ceiling Return Grille - Lay in T-Bar - Channel Frame
Dimensions are in Inches Page: 1 of 2
Sidewall
CC15-9 Metal Industries, / Ceiling Return
Inc. Clearwater, FL (727) 441 - 2651
Grille - Donn Fineline
Fax (800) 865 8383
Lay in
www.metalaire.com sales@metalaire.com
11
CC
Extruded Aluminum
T-Bar (By Others)
Channel Frame (All Around)
Optional:
Opposed Blade Damper
OBD
OBDA
Damper Operator
Listed Size - 81 (Screwdriver Slot)
3
1
8
SUPPLY/RETURN GRILLES
by METALAIRE. Units shall be return or exhaust grille of
aluminum construction. The units shall be the size and Paint Specification
quantity as outlined in the plans and specifications. The Process shall be anodic electro-deposition using an
border shall be 1 1/4" wide with an aluminum cubed core. anodic acrylic paint. Units shall undergo pre-treatment
The units shall be designed to integrate into the specified including a pressurized spray stage using an alkaline
ceiling system. cleaner and a de-ionized water rinse.
Optional opposed blade damper shall be constructed of
steel (Model OBD) or aluminum (Model OBDA).
Damper must be operable from the face of the diffuser.
CC
28 X X X X X X X X X X X
30 X X X X X X X X X X X
32 X X X X X X X X X X X
34 X X X X X X X X X X X
36 X X X X X X X X X X X
38 X X X X X X X X X X X
40 X X X X X X X X X X X
42 X X X X X X X X X X X
44 X X X X X X X X X X X
46 X X X X X X X X X X X
48 X X X X X X X X X X X
Available Options
NSH No Screw Holes
CM Concealed Mounting
GR104 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
CC5 MODEL NUMBER SPECIFICATION
SIDEWALL RETURN GRILLE CUBE CORE SURFACE MOUNT
Model Neck
CC5-1 1/2 x 1/2 x 1/2 Cube Core 28 30 32 34 36 38 40 42 44 46 48
SUPPLY/RETURN GRILLES
CC5S-1 1/2 x 1/2 x 1/2 Cube Core with Steel Frame 4 X X X X X X X X X X X
CC15-1 1/2 x 1/2 x 1 Cube Core 5 X X X X X X X X X X X
CC1-1 1 x 1 x 1 Cube Core 6 X X X X X X X X X X X
8 X X X X X X X X X X X
10 X X X X X X X X X X X
12 X X X X X X X X X X X
14 X X X X X X X X X X X
16 X X X X X X X X X X X
18 X X X X X X X X X X X
20 X X X X X X X X X X X
22 X X X X X X X X X X X
24 X X X X X X X X X X X
26 X X X X X X X X X X X
CC
28 X X X X X X X X X X X
30 X X X X X X X X X X X
32 X X X X X X X X X X X
34 X X X X X X X X X X X
36 X X X X X X X X X X X
38 X X X X X X X X X X X
40 X X X X X X X X X X X
42 X X X X X X X X X X X
44 X X X X X X X X X X X
46 X X X X X X X X X X X
48 X X X X X X X X X X X
Available Options
NSH No Screw Holes
CM Concealed Mounting
24 x 24
14 X X X X X X X X
16 X X X X X X X X
18 X X X X X X X X
20 X X X X X X X X
22 X
GR106 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
CC5 MODEL NUMBER SPECIFICATION
SIDEWALL RETURN GRILLE CUBE CORE LAY-IN
Model Neck
CC5-6 1/2 x 1/2 x 1/2 Cube Core 6 8 10 12 14 16 18 20 22 Module
SUPPLY/RETURN GRILLES
CC5S-6 1/2 x 1/2 x 1/2 Cube Core with Steel Frame 4 X X X X X X X X X
CC15-6 1/2 x 1/2 x 1 Cube Core 6 X X X X X X X X X
CC1-6 1 x 1 x 1 Cube Core 8 X X X X X X X X X
10 X X X X X X X X X
12 X X X X X X X X X
36 x 24
14 X X X X X X X X X
16 X X X X X X X X X
18 X X X X X X X X X
20 X X X X X X X X X
22
4 X X X X X X X X X
6 X X X X X X X X X
8 X X X X X X X X X
CC
10 X X X X X X X X X
12 X X X X X X X X X
14 X X X X X X X X X
16 X X X X X X X X X
18 X X X X X X X X X 36 x 36
20 X X X X X X X X X
22 X X X X X X X X X
24 X X X X X X X X X
26 X X X X X X X X X
28 X X X X X X X X X
30 X X X X X X X X X
32 X X X X X X X X X
Model Neck
CC5-6 1/2 x 1/2 x 1/2 Cube Core 6 8 10 12 14 16 18 20 22 26 Module
SUPPLY/RETURN GRILLES
10 X X X X X X X X X X
12 X X X X X X X X X X
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
22 X X X X X X X X X X
24 X X X X X X X X X X 48 x 48
26 X X X X X X X X X X
28 X X X X X X X X X X
30 X X X X X X X X X X
32 X X X X X X X X X X
34 X X X X X X X X X X
36 X X X X X X X X X X
38 X X X X X X X X X X
40 X X X X X X X X X X
42 X X X X X X X X X X
44 X X X X X X X X X X
GR108 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
CC5 MODEL NUMBER SPECIFICATION
SIDEWALL RETURN GRILLE CUBE CORE LAY-IN
Model Neck
CC5-6 1/2 x 1/2 x 1/2 Cube Core 28 30 32 34 36 38 40 42 44 46 Module
SUPPLY/RETURN GRILLES
CC5S-6 1/2 x 1/2 x 1/2 Cube Core with Steel Frame 4 X X X X X X X X X
CC15-6 1/2 x 1/2 x 1 Cube Core 6 X X X X X X X X X
CC1-6 1 x 1 x 1 Cube Core 8 X X X X X X X X X
10 X X X X X X X X X
12 X X X X X X X X X
48 x 24
14 X X X X X X X X X
16 X X X X X X X X X
18 X X X X X X X X X
20 X X X X X X X X X
22 X
4 X X X X X X X X X
6 X X X X X X X X X
8 X X X X X X X X X
CC
10 X X X X X X X X X
12 X X X X X X X X X
14 X X X X X X X X X
16 X X X X X X X X X
18 X X X X X X X X X
20 X X X X X X X X X
22 X X X X X X X X X
24 X X X X X X X X X
48 x 48
26 X X X X X X X X X
28 X X X X X X X X X
30 X X X X X X X X X
32 X X X X X X X X X
34 X X X X X X X X X
36 X X X X X X X X X
38 X X X X X X X X X
40 X X X X X X X X X
42 X X X X X X X X X
44 X X X X X X X X X
46 X
GR110 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
CC5 MODEL NUMBER SPECIFICATION
CUBE CORE LAY-IN CORE ONLY
Model Neck
CC5TBC-6 1/2 x 1/2 x 1/2 28 30 32 34 36 38 40 42 44 46 48
SUPPLY/RETURN GRILLES
28 X X X X X X X X X X X
30 X X X X X X X X X X
32 X X X X X X X X X
34 X X X X X X X X
36 X X X X X X X
38 X X X X X X
40 X X X X X
42 X X X X
44 X X X
46 X X
48 X
Available Finishes
CC
Standard
01 White
Optional
02 Satin Silver
03 Black
24 Mill
28 Custom Color
Nk Vel 200 300 400 500 600 700 800 900 1000
Size Duct Area ft
Ps -.006 -.013 -.024 -.037 -.054 -.073 -.095 -.120 -.149
SUPPLY/RETURN GRILLES
16x06 CFM 126 189 253 317 378 442 506 570 630
.67
12x08 NC - - - - 13 18 22 26 30
CC
CFM 131 196 261 327 392 457 522 588 653
10x10 .69
NC - - - - 13 18 22 26 30
12x10 CFM 157 235 313 391 469 547 625 703 781
.83
20x06 NC - - - - 13 18 23 26 30
24x06 CFM 191 287 382 478 573 669 764 860 955
1.00
12x12
NC - - - - 14 19 24 28 31
CFM 222 333 444 554 665 776 887 998 1108
14x12 1.16
NC - - - - 15 20 24 28 31
18x10 CFM 239 359 478 597 717 836 955 1075 1194
1.25
30x06 NC - - - - 15 20 25 29 32
CFM 260 390 520 650 780 910 1040 1169 1299
14x14 1.36
NC - - - - 15 20 25 29 32
18x12 CFM 287 430 573 717 860 1003 1146 1290 1433
1.50
36x06 NC - - - - 16 21 25 29 33
24x10 CFM 319 479 638 798 957 1117 1276 1436 1595
1.67
30x08 NC - - - - 16 21 25 29 33
18x14 CFM 335 502 669 836 1003 1170 1337 1505 1672
1.75
42x06 NC - - - - 16 21 26 30 33
18x16 CFM 382 573 764 955 1146 1337 1528 1719 1910
2.00
24x12 NC - - - 11 17 22 26 30 33
CFM 430 645 860 1075 1290 1505 1719 1934 2149
18x18 2.25
NC - - - 11 17 22 26 30 34
CFM 478 717 955 1194 1433 1672 1910 2149 2388
30x12 2.50
NC - - - 11 17 23 27 31 34
CFM 531 797 1062 1328 1593 1859 2124 2390 2655
20x20 2.78
NC - - - 12 18 23 27 31 35
CONTINUED
GR112 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES CC PERFORMANCE DATA
MODELS CC5, CC15, CC1
Nk Vel 200 300 400 500 600 700 800 900 1000
Size Duct Area ft
Ps -.006 -.013 -.024 -.037 -.054 -.073 -.095 -.120 -.149
SUPPLY/RETURN GRILLES
24x18 CFM 573 860 1146 1433 1719 2006 2292 2579 2865
3.00
36x12 NC - - - 12 18 23 28 32 35
CFM 642 963 1284 1605 1926 2247 2568 2888 3209
22x22 3.36
NC - - - 12 18 23 28 32 35
36x14 CFM 669 1003 1337 1672 2006 2340 2674 3009 3343
3.50
42x12 NC - - - 13 19 24 28 32 36
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
CC
Velocity Velocity of air stream in Feet Per Minute
Ps Negative Static pressure (inches of water column)
NC Noise criterion, sound pressure level NC ratings are based on sound power level (lw)
RE: 10-12 watts minus a 10dB room attenuation in all octave bands
Nk Vel 200 300 400 500 600 700 800 900 1000
Size Duct Area ft
Ps -.006 -.013 -.024 -.037 -.054 -.073 -.095 -.120 -.149
SUPPLY/RETURN GRILLES
CFM 705 1057 1410 1762 2114 2467 2819 3171 3524
24x22 3.67
NC - - - 13 19 24 28 32 36
CFM 720 1080 1440 1800 2160 2520 2880 3240 3600
30x18 3.75
NC - - - 13 19 24 28 32 36
48x12 CFM 768 1152 1536 1920 2304 2688 3072 3456 3840
4.00
24x24 NC - - - 13 19 24 29 33 36
CFM 800 1200 1600 2000 2400 2800 3200 3600 4000
30x20 4.17
NC - - - 13 19 24 29 33 36
CFM 864 1296 1728 2160 2592 3024 3456 3888 4320
36x18 4.50
NC - - - 14 20 25 29 33 37
36x20 CFM 960 1440 1920 2400 2880 3360 3840 4320 4800
5.00
30x24 NC - - - 14 20 25 30 33 37
CC
CFM 1008 1512 2016 2520 3024 3528 4032 4536 5040
42x18 5.25
NC - - - 14 20 25 30 34 37
CFM 1045 1567 2089 2612 3134 3656 4178 4701 5223
28x28 5.44
NC - - - 14 20 25 30 34 37
CFM 1056 1584 2112 2640 3168 3696 4224 4752 5280
36x22 5.50
NC - - - 14 20 25 30 34 37
48x18 CFM 1152 1728 2304 2880 3456 4032 4608 5184 5760
6.00
36x24 NC - - - 15 21 26 30 34 38
48x24 CFM 1536 2304 3072 3840 4608 5376 6144 6912 7680
8.00
36x32 NC - - - 16 22 27 31 35 39
48x30 CFM 1920 2880 3840 4800 5760 6720 7680 8640 9600
10.00
42x34 NC - - - 16 23 28 32 36 39
CFM 1926 2889 3852 4815 5778 6741 7704 8666 9629
38x38 10.03
NC - - - 16 23 28 32 36 39
CFM 2016 3024 4032 5040 6048 7056 8064 9072 10080
42x36 10.50
NC - - 11 17 23 28 32 36 40
CFM 2086 3128 4171 5213 6256 7298 8341 9384 10426
46x34 10.86
NC - - 11 17 23 28 32 36 40
CFM 2128 3192 4255 5319 6383 7446 8510 9574 10637
42x38 11.08
NC - - 11 17 23 28 32 36 40
CFM 2134 3200 4267 5333 6400 7466 8533 9600 10666
40x40 11.11
NC - - 11 17 23 28 32 36 40
CFM 2304 3456 4608 5760 6912 8064 9216 10368 11520
48x36 12.00
NC - - 11 17 23 28 33 37 40
CONTINUED
GR114 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES CC PERFORMANCE DATA
MODELS CC5, CC15, CC1
Nk Vel 200 300 400 500 600 700 800 900 1000
Size Duct Area ft
Ps -.006 -.013 -.024 -.037 -.054 -.073 -.095 -.120 -.149
SUPPLY/RETURN GRILLES
CFM 2352 3528 4704 5880 7056 8232 9408 10584 11760
42x42 12.25
NC - - 11 17 23 28 33 37 40
CFM 2581 3871 5161 6452 7742 9032 10322 11613 12903
44x44 13.44
NC - - 12 18 24 29 33 37 41
CFM 2821 4231 5641 7052 8462 9872 11282 12693 14103
46x46 14.69
NC - - 12 18 24 29 33 37 41
CFM 3072 4608 6144 7680 9216 10752 12288 13824 15360
48x48 16.00
NC - - 12 18 24 29 34 38 41
CC
All data is tested in accordance with ANSI/ASHRAE 70-2006.
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Velocity Velocity of air stream in Feet Per Minute
Ps Negative Static pressure (inches of water column)
NC Noise criterion, sound pressure level NC ratings are based on sound power level (lw)
RE: 10-12 watts minus a 10dB room attenuation in all octave bands
MODEL RP
The RP series perforated face return or exhaust grilles is designed
to blend into the ceiling system and provide a clean, uncluttered
architectural appearance. The RP series is ideal for commercial
SUPPLY/RETURN GRILLES
GR116 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES RP SPECIFICATIONS
RETURN PERFORATED FACE Performance Specification
ALUMINUM/STEEL MODELS RP/SRP The manufacturer shall provide published performance
Air inlets shall be model RP/SRP manufactured by data. Data shall be tested in accordance to ANSI/
METALAIRE. Units shall be perforated face, return ASHRAE Standard 70-2006.
SUPPLY/RETURN GRILLES
or exhaust grilles of aluminum (RP) or steel (SRP)
construction. The units shall be the size and quantity Paint Specification
as outlined in the plans and specifications. The border Process shall be anodic electro-deposition using an
shall be 1 1/4" wide with a perforated face of 3/16" anodic acrylic paint. Units shall undergo pre-treatment
diameter holes on 1/4" center and a 51% free area. including a pressurized spray stage using an alkaline
Units shall be designed for surface mounting, with cleaner and a de-ionized water rinse.
countersunk screw holes on the face of the device, or
T-bar Lay-in applications.
Optional opposed blade damper shall be constructed of
steel (Model OBD) or aluminum (Model OBDA).
Damper must be operable from the face of the register.
RP
28 X X X X X X X X X X
30 X X X X X X X X X X
32 X X X X X X X X X X
34 X X X X X X X X X X
36 X X X X X X X X X X
38 X X X X X X X X X X
40 X X X X X X X X X X
42 X X X X X X X X X X
44 X X X X X X X X X X
46 X X X X X X X X X X
48 X X X X X X X X X X
Available Accessories
OBD Steel Opposed Blade Damper
OBDA Aluminum Opposed Blade Damper
L9 Equalizing Grid
PF Plaster Frame
LIPF Lay-in Plaster Frame
IS Insect Screen
TR Square to Round Transition
TR Deep Deep Square to Round Transition
Available Options
NSH No Screw Holes
CM Concealed Mounting
GR118 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
RP MODEL NUMBER SPECIFICATION
SIDEWALL RETURN GRILLE PERFORATED FACE SURFACE MOUNT
Model Neck Available Finishes
RP-1 Aluminum 26 28 30 32 34 36 38 40 42 44 46 48 Standard
SUPPLY/RETURN GRILLES
SRP-1 Steel 4 X X X X X X X X X X X X 01 White
5 X X X X X X X X X X X X Optional
6 X X X X X X X X X X X X 02 Satin Silver
8 X X X X X X X X X X X X 03 Black
10 X X X X X X X X X X X X 24 Mill (Aluminum Construction Only)
12 X X X X X X X X X X X X 28 Custom Color
14 X X X X X X X X X X X X
16 X X X X X X X X X X X X
18 X X X X X X X X X X X X
20 X X X X X X X X X X X X
22 X X X X X X X X X X X X
24 X X X X X X X X X X X X
26 X X X X X X X X X X X X
RP
28 X X X X X X X X X X X X
30 X X X X X X X X X X X X
32 X X X X X X X X X X X X
34 X X X X X X X X X X X X
36 X X X X X X X X X X X X
38 X X X X X X X X X X X X
40 X X X X X X X X X X X X
42 X X X X X X X X X X X X
44 X X X X X X X X X X X X
46 X X X X X X X X X X X X
48 X X X X X X X X X X X X
Available Accessories
OBD Steel Opposed Blade Damper
OBDA Aluminum Opposed Blade Damper
L9 Equalizing Grid
PF Plaster Frame
LIPF Lay-in Plaster Frame
IS Insect Screen
TR Square to Round Transition
TR Deep Deep Square to Round Transition
Available Options
NSH No Screw Holes
CM Concealed Mounting
SRP-6 Steel 4 X X
6 X X
12 x 12
8 X X
10 X
4 X X X X X X X X
6 X X X X X X X X
24 x 12
8 X X X X X X X X
10 X
4 X X X X X X X X
6 X X X X X X X X
8 X X X X X X X X
10 X X X X X X X X
12 X X X X X X X X
RP
24 x 24
14 X X X X X X X X
16 X X X X X X X X
18 X X X X X X X X
20 X X X X X X X X
22 X
4 X X X X X X X X X X
6 X X X X X X X X X X
8 X X X X X X X X X X
10 X X X X X X X X X X
12 X X X X X X X X X X 48 x 24
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
GR120 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
RP MODEL NUMBER SPECIFICATION
RETURN GRILLE PERFORATED FACE LAY-IN
Model Neck
RP-6 Aluminum 26 28 30 32 34 36 38 40 42 44 46 Module
SUPPLY/RETURN GRILLES
SRP-6 Steel 4 X X X X X X X X X X
6 X X X X X X X X X X
8 X X X X X X X X X X
10 X X X X X X X X X X
12 X X X X X X X X X X
48 x 24
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
22 X
RP
01 White OBDA Aluminum Opposed Blade Damper
Optional L9 Equalizing Grid
02 Satin Silver TBPF T-bar Plaster Frame
03 Black IS Insect Screen
24 Mill (Aluminum Construction Only) TR Square to Round Transition
28 Custom Color TR Deep Deep Square to Round Transition
SRP-6 Steel 4 X X X X X X X X X X
6 X X X X X X X X X X
8 X X X X X X X X X X
10 X X X X X X X X X X
12 X X X X X X X X X X
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
22 X X X X X X X X X X
24 X X X X X X X X X X 48 x 48
26 X X X X X X X X X X
28 X X X X X X X X X X
RP
30 X X X X X X X X X X
32 X X X X X X X X X X
34 X X X X X X X X X X
36 X X X X X X X X X X
38 X X X X X X X X X X
40 X X X X X X X X X X
42 X X X X X X X X X X
44 X X X X X X X X X X
GR122 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
RP MODEL NUMBER SPECIFICATION
RETURN GRILLE PERFORATED FACE LAY-IN
Model Neck
RP-6 Aluminum 26 28 30 32 34 36 38 40 42 44 46 Module
SUPPLY/RETURN GRILLES
SRP-6 Steel 4 X X X X X X X X X X
6 X X X X X X X X X X
8 X X X X X X X X X X
10 X X X X X X X X X X
12 X X X X X X X X X X
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
22 X X X X X X X X X X
24 X X X X X X X X X X
48 x 48
26 X X X X X X X X X X
28 X X X X X X X X X X
RP
30 X X X X X X X X X X
32 X X X X X X X X X X
34 X X X X X X X X X X
36 X X X X X X X X X X
38 X X X X X X X X X X
40 X X X X X X X X X X
42 X X X X X X X X X X
44 X X X X X X X X X X
46 X
10x10 .69
NC - 15 18 21 23 25 27 29 30
CFM 190 253 316 379 442 505 568 631 695
18x06 .75
NC 11 15 18 21 24 26 28 29 31
24x06 CFM 265 353 441 529 617 705 793 881 970
1.00
12x12 NC 12 16 20 23 25 27 29 31 32
30x06 CFM 334 445 556 667 778 889 1000 1111 1223
1.25
18x10 NC 13 17 21 24 26 28 30 32 33
36x06 CFM 406 541 676 811 946 1081 1216 1351 1487
1.50
18x12 NC 14 18 22 25 27 29 31 32 34
42x06 CFM 478 637 796 955 1114 1273 1432 1591 1751
1.75
18x14 NC 15 19 22 25 28 30 32 33 35
24x12 CFM 547 729 911 1093 1275 1457 1639 1821 2004
2.00
18x16 NC 15 20 23 26 28 30 32 34 35
CFM 688 917 1146 1375 1604 1833 2062 2291 2521
30x12 2.50
NC 16 21 24 27 29 31 33 35 36
CFM 826 1101 1376 1651 1926 2201 2476 2751 3027
36x12 3.00
NC 17 21 25 28 30 32 34 35 37
42x12 CFM 967 1289 1611 1933 2255 2577 2899 3221 3544
3.50
36x14 NC 17 22 25 28 31 33 34 36 38
48x12 CFM 1126 1501 1876 2251 2626 3001 3376 3751 4127
4.00
24x24 NC 18 23 26 29 31 34 35 37 38
36x20 CFM 1414 1885 2356 2827 3298 3769 4240 4711 5183
5.00
30x24 NC 19 24 27 30 32 34 36 38 39
CONTINUED
GR124 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
Duct Nk Vel 300 400 500 600 700 800 900 1000 1100
Size
Area ft Ps -.023 -.041 -.064 -.092 -.126 -.165 -.209 -.259 -.314
48x18
SUPPLY/RETURN GRILLES
6.00
36x24 NC 20 24 28 31 33 35 37 39 40
48x24 CFM 2290 3053 3816 4579 5342 6105 6868 7631 8395
8.00
36x32 NC 21 26 39 32 34 36 38 40 41
CFM 3472 4629 5786 6943 8100 9257 10414 11571 12729
48x36 12.00
48x48 16.00
NC 24 29 32 35 37 40 41 43 44
RP
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Nk Vel Neck Velocity of air stream in Feet Per Minute
Ps Negative Static pressure (inches of water column)
NC Noise criterion, sound pressure level. NC ratings are based on sound power level
(Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
METALAIRE spiral duct grilles are designed specifically for mounting on a round or spiral duct
eliminating the need for a contractor fabricated register tab.
GR126 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
MODEL 4004P
The 4004P series offers superior performance and a clean low
profile appearance. This series is available as
a double deflection supply (4004P/4004SP)
Includes built-in extractor on supply unit to allow accurate balancing and uniform air flow
Available for duct diameters 10" to 48" (see table Page 122)
4004P
GR128 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
4004P MODEL NUMBER SPECIFICATION
SPIRAL DUCT GRILLE
Model Width Height Available Finishes
4004P Aluminum - Double Deflection Supply Standard
4004SP Galvanized Steel - Double Deflection Supply 01 White (Aluminum Construction)
Available Options
NSH No Screw Holes
Width
4004P
10 12 14 16 18 20 24 30 36 38 40 42 44 46 48
Height Minimum / Maximum Duct Diameter
3 6/24 6/24 6/24 6/24 6/24 6/24 6/24 6/24 6/24 6/24 6/24 6/24 6/24 6/24 6/24
4 8/24 8/24 8/24 8/24 8/24 8/24 8/24 8/24 8/24 8/24 8/24 8/24 8/24 8/24 8/24
6 12/24 12/24 12/24 12/24 12/24 12/24 12/24 12/24 12/24 12/24 12/24 12/24 12/24 12/24 12/24
8 - - 20/36 20/36 20/36 20/36 20/36 20/36 20/36 20/36 20/36 20/36 20/36 20/36 20/36
10 - - - - 30/48 30/48 30/48 30/48 30/48 30/48 30/48 30/48 30/48 30/48 30/48
12 - - - - 42/48 42/48 42/48 42/48 42/48 42/48 42/48 42/48 42/48 42/48 42/48
10x03 0.15 NC - - - - 14 19 23 26
Throw 2-4-9 4-6-12 6-9-14 7-11-16 9-12-17 10-13-18 11-14-20 12-15-21
Ac ft CFM 35 53 70 88 105 123 141 158
12x03 0.18 NC - - - - 15 20 24 27
Throw 2-4-10 4-7-13 6-10-15 8-12-17 10-13-19 11-14-20 13-15-22 13-16-23
Ac ft CFM 42 63 84 104 125 146 167 188
10x04
0.21 NC - - - - 16 20 24 28
14x03
Throw 2-5-10 5-8-15 7-10-17 9-13-19 10-15-21 12-16-22 14-17-24 15-18-25
Ac ft CFM 51 76 102 127 152 178 203 229
12x04
0.26 NC - - - 11 17 21 25 29
16x03
Throw 2-5-11 5-9-16 8-11-19 10-14-21 11-16-23 13-17-25 15-19-26 16-20-28
4004P
CONTINUED
GR130 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES 4000P PERFORMANCE DATA
MODELS 4004P, 4004SP
4004P
30x06
Throw 5-11-24 11-18-34 16-24-39 20-30-43 24-34-47 28-36-51 32-39-55 34-41-58
20x10 Ac ft CFM 247 371 494 618 742 865 989 1112
24x08 1.24 NC - - 12 18 23 28 32 35
48x04 Throw 5-12-25 12-19-35 17-25-41 21-32-46 25-35-50 30-38-54 33-41-58 35-43-61
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Velocity Velocity of air stream in Feet per Minute
Ps Static pressure = PtPv (inches of water column)
Throw Non-isothermal horizontal throw (supply air temperature 15F colder than average
room temperature); values are for 150, 100 and 50fpm velocities
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
Ac Actual Core Free Area in square feet
18x12
36x06 1.35 NC - - 12 18 24 28 32 36
Throw 6-12-27 12-20-37 18-26-43 22-33-48 26-37-52 31-40-56 35-43-60 37-45-64
20x12 Ac ft CFM 301 451 602 752 903 1053 1203 1354
24x10 1.51 NC - - 12 19 24 29 33 36
30x08 Throw 6-13-28 13-21-39 19-28-45 23-35-50 28-39-55 33-42-60 37-45-64 39-48-68
Ac ft CFM 301 451 602 752 903 1053 1203 1354
42x06 1.51 NC - - 12 19 24 29 33 36
Throw 6-13-28 13-21-39 19-28-45 23-35-50 28-39-55 33-42-60 37-45-64 39-48-68
24x12 Ac ft CFM 364 546 727 909 1090 1272 1453 1635
36x08 1.82 NC - - 13 19 25 30 33 37
4004P
48x06 Throw 6-14-31 14-23-43 20-31-50 26-38-55 31-43-61 36-46-66 40-50-70 43-53-74
Ac ft CFM 376 564 752 939 1127 1315 1503 1680
30x10 1.88 NC - - 13 20 25 30 34 37
Throw 6-15-31 15-23-44 21-31-50 26-39-56 31-44-62 36-47-67 41-50-71 44-53-76
Ac ft CFM 416 634 831 1039 1246 1454 1661 1869
42x08 2.08 NC - - 13 20 25 30 34 38
Throw 7-15-33 15-25-46 22-33-53 27-41-59 33-46-65 38-50-70 43-53-75 46-56-79
Ac ft CFM 456 685 914 1142 1371 1600 1829 2057
30x12 2.28 NC - - 14 20 26 30 34 38
36x10 Throw 7-16-34 16-26-48 23-34-56 29-43-62 34-48-68 40-52-74 45-56-79 48-59-83
Ac ft CFM 476 714 952 1190 1428 1666 1904 2142
48x08 2.38 NC - - 14 21 26 31 35 38
Throw 7-16-35 16-26-49 23-35-57 29-44-63 35-49-69 41-53-75 46-57-80 49-60-85
Ac ft CFM 530 795 1060 1325 1590 1855 2120 2385
42x10 2.65 NC - - 14 21 26 31 35 39
Throw 8-17-37 17-28-52 25-37-60 31-46-67 37-52-73 43-56-79 49-60-85 52-63-90
Ac ft CFM 550 826 1101 1377 1652 1928 2203 2479
36x12 2.75 NC - - 15 21 27 31 35 39
Throw 8-18-38 18-28-53 25-38-61 32-47-68 38-53-75 44-57-81 50-61-86 53-65-92
CONTINUED
GR132 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES 4000P PERFORMANCE DATA
MODELS 4004P, 4004SP
48x10 3.03 NC - - 15 22 27 32 36 39
4004P
PERFORMANCE NOTES FOR SERIES 4000P
All data is tested in accordance with ANSI/ASHRAE 70-2006.
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Velocity Velocity of air stream in Feet per Minute
Ps Static pressure = PtPv (inches of water column)
Throw Non-isothermal horizontal throw (supply air temperature 15F colder than average
room temperature); values are for 150, 100 and 50fpm velocities
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
Ac Actual Core Free Area in square feet
Nk Vel 200 300 400 500 600 700 800 900 1000
Size Ac ft2
Ps -.010 -.023 -.041 -.064 -.092 -.125 -.163 -.207 -.256
CFM 29 43 58 72 87 101 116 130 145
SPIRAL DUCT GRILLES
10x03 .21
NC - - - 12 15 17 19 21 23
CFM 42 55 67 80 93 106 119 132 145
10x04 .28
NC - - - - 12 14 16 17 19
CFM 68 101 135 169 202 236 270 304 337
10x06 .42
NC - - 12 16 18 21 23 25 26
CFM 51 76 102 127 152 178 203 229 254
12x04 .33
NC - - 11 14 17 20 22 24 25
CFM 82 123 164 205 246 287 328 369 410
12x06 .50
NC - - 13 16 19 22 24 26 27
CFM 97 145 193 241 290 338 386 435 483
4000SPFR
14x06 .58
NC - - 13 16 19 22 24 26 28
CFM 134 200 267 334 400 467 537 600 667
14x08 .78
NC - 11 15 29 21 24 26 28 29
CFM 170 255 340 425 511 596 681 766 851
14x10 .97
NC 12 16 20 22 25 27 29 30 32
CFM 111 167 222 278 334 389 445 500 556
16x06 .67
NC - - 14 18 21 23 25 27 29
CFM 154 230 307 384 461 538 614 691 768
16x08 .89
NC - 11 16 19 22 24 26 28 30
CFM 196 294 392 490 588 686 784 882 980
16x10 1.11
NC - 12 17 20 23 25 28 29 31
CFM 174 260 347 343 521 608 695 782 869
18x08 1.00
NC - 12 16 20 23 25 27 29 30
CFM 222 333 444 554 665 776 887 997 1106
18x10 1.25
NC - 13 17 21 24 26 28 30 32
CFM 270 405 540 674 809 944 1079 1213 1348
18x12 1.50
NC - 14 18 22 24 27 29 31 32
CFM 194 291 388 485 582 678 775 872 969
20x08 1.11
NC - 12 17 20 23 25 28 29 31
CFM 247 317 495 618 742 866 990 1411 1237
20x10 1.39
NC - 13 18 21 24 26 29 30 32
CONTINUED
GR134 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES 4000SPFR PERFORMANCE DATA
MODELS 4000SPFR, 4000PFR, 4000PCFPF
Nk Vel 200 300 400 500 600 700 800 900 1000
Size Ac ft2
Ps -.010 -.023 -.041 -.064 -.092 -.125 -.163 -.207 -.256
CFM 301 451 602 752 903 1053 1203 1354 1504
CFM 364 546 727 909 1090 1272 1453 1635 1816
24x12 2.00
NC - 15 19 23 26 28 30 32 34
CFM 295 442 589 736 884 1031 1178 1325 1472
30x08 1.67
NC - 14 19 22 25 27 29 31 33
4000SPFR
CFM 376 563 751 9038 1126 1313 1500 1688 1875
30x10 2.08
NC - 15 20 23 26 28 30 32 34
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Nk Vel Neck Velocity of air stream in Feet per Minute
Ps Negative Static pressure (inches of water column)
NC Noise criterion, sound pressure level NC ratings are based on sound power level (Lw)
re: 10-12 watts minus a 10dB room attenuation in all octave bands
Ac Actual Core Free Area in square feet
FILTER GRILLES
MODEL RHF
FILTER GRILLES
METALAIRE offers a complete line of return filter grilles available in steel or aluminum
construction with louvered, egg crate or perforated face design.
GR136 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
MODEL RHF
The RHF series of louvered filter grilles combines the advantages
of rugged construction with attractive design and solid
performance. The RHF series is available in aluminum (RHF),
extruded aluminum (RHEF) and steel (SRHF) construction.
Horizontal blades fixed at 40 deflection
FILTER GRILLES
Optional stainless steel construction
RHF
LIsted Size - 8
Extruded Aluminum 45
Horizontal Deflecting Vanes Mounting Holes Mounting Holes
A
Model: RHEF-1 ( Filter Return .666Grille)
Face View Face View
5 1
Model: 32
RHEF-6 ( Filter
14 Return Grille)
( Surface Mount ) Face View Disposable
Disposable Filter Dimension
Removable Face
( Lay in T-Bar ) Extruded Aluminum 45 Rotating Fastener Filter Thickness A
Rotating Fastener Thickness
Rotating
1" Fastener Dimension A
2-7/16
Horizontal Deflecting Vanes Mounting Holes Mounting Holes
Listed
T-Bar Size +-213
Module 48 Filter Back Accepts 12" 2 7/16
3-7/16
Duct Size = Listed Size Filter Back Accepts
.666 Disposable
Disposable Filter
Filter
LIsted Size -18 1 Face View 2 3 7/16
Model: RHEF-6 ( Filter Return
Listed Grille)
Size -
8
Disposable
Disposable Dimension
Dimension
( Lay in T-Bar ) H Rotating Fastener Filter
Filter Thickness
Thickness A
B
1"
1" 2-7/16
3-15/16
1 A A
T-Bar Module - 4
Filter Back Accepts Disposable
2" Filter
2" 3-7/16
4-15/16
55 141
32
32
15
16
Disposable Filter Thickness Dimension B
Listed Size - 1 Extruded
Extruded Aluminum
Aluminum 45 45 Disposable Dimension
8 W
Horizontal
Horizontal Deflecting
Deflecting VanesVanes H
Mounting Holes 1
FilterMounting Holes B3 15/16
Thickness
.666 A 1" 21 3-15/16
2 8
4 15/16
RHF
.666
Face View 2" 4-15/16
Height
Model: 32
5RHEF-6 ( Filter
15 Return Grille) Disposable Dimension
16
Lay-In ( LayModules
T-Bar in T-Barfor
)Extruded
RHEF-6 Aluminum 45 Rotating Fastener Filter Thickness A
W 1"
12 x 12 24 xVanes
24 2-7/16
Module Size: 124 x 12
Horizontal Deflecting 48 x 24
T-Bar Module - 4 TR (A)/TR Deep (B)
Listed Size: 10 x 10
.666 22 x 10 22 Back
Filter x 22 Accepts 46 x 22 2" 21 3-7/16
Transition 8Square/
Overall Dim. (W x H) 11 3/4 x 11 3/4 23 3/4 x 11 3/4 Disposable
23 Filter47 3/4 x 23 3/4
3/4 x 23 3/4 Rectangular To Round
Height
Listed Size - 1 Disposable Dimension
8
Lay-In T-Bar Modules for RHEF-6 H T-Bar Module = Grid Size Filter Thickness B
ModuleOptions:
Damper Size: 12 x 12 24 x 12 A 24 x 24 48 x 24 Overall Grille Size =
1" 3-15/16
TR (A)/TR Deep (B)
Listed Size: 10 Size
Duct x 10= Listed Size 22 x 10 22 x 22 46 x 22 T- Bar Module - 41 2" 4-15/16
5 Lay-in T-Bar Modules for RHEF - 6 Transition Square/
Overall Dim.
32 (W x H) 11 16
15
3/4 Listed
x 11 Size
3/4 - 123 3/4 x 11 3/4 Options:
23 3/4 x 23 3/4 47 3/4 x 23 3/4 Duct Size = Listed Size Rectangular To Round
8 Options:
Module Size 12 x 12 Extruded
24Aluminum
x 12 45 24 x 24 48 x 24
Listed
W Size - 8
1
HorizontalOpposed
DeflectingBlade
VanesDamper T-Bar Module = Grid Size
Opposed Blade Damper
Damper
Listed Size Options: 10 x 10 22 Damper
x 10 1
Operator 22 x 22 46 x 22
.666 2
Overall Grille Size = 8
B B Damper Operator
Duct Size = Listed Size (Screwdriver Slot) T- Bar Module - 41
Overall Dim. (W x H) 11 3/4 x 11 3/4 23 3/4Options:
x 11 3/4 23 3/4 x 23 3/4 47Duct
3/4Size
x 23 3/4 (ScrewdriverHeight
Slot)
1 = Listed Size
Listed Size - 8
Lay-In T-Bar Modules for RHEF-6 Options:
15 1
16 Listed Size - 8
Module Size: 12 x 12 24 x 12 Opposed24 xBlade
24 Damper 48 x 24 Opposed
TR (A)/TR Blade
Deep (B) Damper
Listed Size: 10 x 10 22 x 10 22Operator
x 22 46 x 22
B Damper B Transition Square/
Damper Operator
Overall Dim. (W x H) 11 3/4 x 11 3/4 23 3/4 x 23Slot)
23 3/4 x 11 3/4 (Screwdriver 3/4 47 3/4 x 23 3/4 Rectangular ToSlot)
Round
(Screwdriver
Overall Face = Listed Size + 2 3
8 15T-Bar Module = Grid Size
16
Damper Options: Overall Grille Size =
Duct Size = Listed Size T- Bar Module - 41
1
Listed Size - 8 Options: Duct Size = Listed Size
Options:
1
Listed Size - 8
Overall Face = Listed Size + 2 3
8 Opposed Blade Damper Opposed Blade Damper
B Damper Operator B Damper Operator
(Screwdriver Slot) (Screwdriver Slot)
15
16
GR138 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
Model: SRHF-1 ( Filter Return Grille - Surface Mount )
Listed Size + 2 41
Mounting Holes Mounting Holes
Duct Size = Listed Size Filter Back Accepts
Disposable Filters
Listed Size - 1
8
Model:( SRHF-1
Model: SRHF-1 ( Filter
Filter Return Return
Grille Grille -Mount
- Surface Surface
) Mount )
A Listed Size Listed
+2 4 1 Size + 2 1
4 Mounting Holes
Mounting Holes Mounting Holes
Mounting Holes
Duct Size
Duct Size = Listed Size= Listed SizeFilter BackFilter
AcceptsBack Accepts
5 1 1 1 DisposableDisposable
Filters Filters
32 Listed 1Size
4 Listed
- Size -
8
8
Deflection Vanes
(Horizontal)
A Face view
FILTER GRILLES
A Face View
.666 (SRHF-1) Removable Face
5
5 1 1 1Return Grille - Lay in T-Bar )
32 1 4 ( Filter
Model: SRHF-6 (SRHF-1)
32Model: SRHF-1 ( Filter4Return Grille - Surface Mount )
Deflection1 Deflection
Vanes Vanes Rotating Fastener
Listed
T-BarSize + 2 4 (Horizontal)
Module
(Horizontal) Mounting Holes Mounting Holes
Duct
Duct Size
Size == Listed
Listed Size
Size Filter Back Accepts Face viewFace view Face ViewFace ViewDimension
Disposable
.666 .666Listed
Listed Size
1
Size -- 81
Disposable Filters (SRHF-1) (SRHF-1) Removable Removable
Filter
Disposable Thickness
Filter
Face FaceA
8 Filter Back Accepts (SRHF-1) 1"(SRHF-1) 2-7/16
Model:( SRHF-6
Model: SRHF-6 ( Filter
Filter Return Return
Grille Grille
- Lay - Lay) in T-Bar )
in T-Bar Disposable Filters
Thickness Dimension A
A Rotating Fastener
Rotating Fastener 2" 3-7/16
A
T-Bar Module T-Bar Module 1 2 7/16
1 Size
Duct Size =1Duct
Listed = Listed Size
Size DisposableDisposableDimensionDimension
5 4
1
Size - 1
2Filter Thickness
Filter Thickness A 3 7/16A
32 Listed 1Size -1
4 Listed 8 Horizontal
8 Filter BackFilter
AcceptsBack Accepts 1" Disposable
1"2-7/16 Dimension
2-7/16
Deflection Vanes
Vanes Filter Thickness B
A
DisposableDisposable
Deflection Filters Filters Face view
A (Horizontal) 2" 2"
1"3-7/16 3-7/16
Face view
(SRHF-6) Face View 3-15/16
1 (SRHF-1) Disposable Filter Removable
2" Face
4-15/16
1
14 1.666
.666
4
Lay-In Grille
T-Bar Modules forT-Bar
SRHF-6 and SRHFD-6 Models
Thickness (SRHF-1) Dimension B
Model: SRHF-6 ( Filter Return - Lay in
Horizontal )
12 x 12 24 x 12 Horizontal 36 x 12 48 x 12 24 x 24 36 x 24 48 x 24 36 x 36 48 x 48 DisposableDisposable DimensionDimension
Deflection Deflection
Vanes Listed Vanes Rotating Fastener 1Filter Thickness
Filter Thickness B 3 15/16 B
T-Bar Module
Sizes Face viewFace view
1"3-15/16 3-15/16
RHF
10 x 10 22 x 10 34 x 10 46 x 10 22 x 22 34 x 22 46 x 22 34 x 34 (SRHF-6)
46 x 46 (SRHF-6) 1"
Duct Size = Listed Size 2Disposable 4 15/16
Dimension
Option: SRHF-1.666 ( Register
.666 - Surface1Mount )
Listed Size -
2"4-15/16 4-15/16
2" Filter Thickness A
With
Lay-InOpposed
T-Bar 8 Blade
Modules for Damper
SRHF-6
Lay-In T-Bar Modules for SRHF-6 and SRHFD-6 Models Filter
andBack Accepts
SRHFD-6 Models Option: SRHF-6 ( Register - Lay in T-Bar )1" 2-7/16
12 x 12 A 2412x x1212 3624 xx 12
Listed 12 Size 36+xx212
48 1
12 48 xx 24
24 12 36 24 xxDisposable
24 48
24 Filters48 x 24
36 xx 24
24 36 x 36 36 xx 48
48 36 48 x 48 With Opposed Blade Damper
4 2" 3-7/16
Listed SizesListed Sizes
10 x 10 22 10 Duct
10 xx 10 22 x1Size
34 10 = Listed
x 10 46 Size 22
34 xx 10
10 46 xx 22
10 34 22 xx 2222 46 34 xx 22
22 34 46 xx 34
22 46 34 xx 46
34 46 x 46
14 Options:
Lay-in T-bar Modules for SRHF - 6 and SRHFD - 6 ModelsT-Bar Module
Option:( SRHF-1
Option: SRHF-1 Register( -Register
SurfaceListed-Mount - 1) Mount )
Surface
Size
8 SRHF-6 Duct Size
Option:( SRHF-6 = Listed
( Register Size
- Lay) in Disposable
T-Bar )
24x Option: 36 x 24Register -48 Lay in T-Bar
Horizontal Options:
12 x 12 With Opposed 24 xWith 12 Opposed
Blade Damper
36 Blade
x 12 Damper
Opposed 48 x 12Blade Damper 24 x 24 1 Opposed 36 x 36
Filter Thickness 48Dimension
x 48
B
+ 2 41 Size + 2 4
Listed Size Listed
1 Deflection Vanes With
Face view
Listed With
Opposed
Size -8 Blade Damper Blade Damper
1"
Opposed Blade3-15/16
Damper
B Damper Operator Listed Size (SRHF-6)
Duct Size =Duct
Listed Size = Listed Size
Size 2"
.666 Options: (Screwdriver Slot)
Options: 4-15/16
T-Bar Module
10 x 10 Listed Size 22 Listed
x- 110 Size
Lay-In - 1 Modules
T-Bar 8
34 x 10 for SRHF-646and x 10
SRHFD-6 Models 22 x 22 B 34 xT-Bar
22 Module 46 x 22 34 x 34 46 x 46
Damper Operator
5 8 Filter 24
Back Duct Size =Duct Size
Listed = Listed SizeOptions: Options:
Size
32 12 x 12 24 x 12 36 x 12 48 x 12
Opposed x 24Accepts
Opposed
Blade 36
Damper x Undersized
Blade 24 Damper
48 x 24 36 x 36 48 x 48 (Screwdriver Slot)
1" Thick Throw-away Filter Sizes 1 1
1 Listed Sizes 1 Listed
Listed Size
14
-8 Size - 8
B B 10 x 10 1 22 4 x 10 34 x 10 46 x 10 Operator
Damper 22 x 22 Operator
Damper 34 x 22 46 x 22 34 x 34 46 x 46 Opposed BladeOpposed Blade Damper
Damper
Deflection
Option: SRHF-1 ( Register - Surface MountVanes
) (Screwdriver Slot) Deflection Vanes
(Screwdriver Slot)
(Horizontal)
With Opposed Blade Damper B B Option: SRHF-6 ( Register - Lay in T-Bar ) (Horizontal)
Damper Operator
1 Damper Operator
5 5 .666 1 BackFilter Back Accepts Undersized 28 With Opposed Blade Damper Slot)
32 32 Listed Size + 2Filter
4
Accepts Undersized .666 (Screwdriver
(Screwdriver Slot)
1 1" Thick Throw-away
1" Thick Throw-away Filter SizesFilter Sizes 1 1
1
14 14 Height
14 14
Duct Size = Listed Size
Deflection Vanes Options: T-Bar Module
Deflection Vanes Deflection Deflection Vanes
Listed Size - 1 Vanes
8
(Horizontal)(Horizontal) Duct Size = Listed Size (Horizontal) (Horizontal)
Options:
.666 Opposed Blade Damper 1 2 1 1
.666 28 8 Listed
.666 Size - 8
.666
B Damper Operator Height Opposed Blade Damper
Height
(Screwdriver Slot)
B Damper Operator
5 Filter Back Accepts Undersized
32 (Screwdriver Slot)
1 1" Thick Throw-away Filter Sizes 1
14 14
Deflection Vanes Deflection Vanes
(Horizontal) (Horizontal)
.666 1
28
.666
Height
Air inlets shall be model RHF/RHEF/SRHF manufactured Process shall be anodic electro-deposition using an
by METALAIRE. Units shall be filter return or exhaust anodic acrylic paint. Units shall undergo pre-treatment
grilles of aluminum (RHF), extruded aluminum (RHEF) including a pressurized spray stage using an alkaline
or steel (SRHF) construction and have a single set of cleaner and a de-ionized water rinse.
fixed horizontal blades. The units shall include a hinged
face and integral frame designed to accept a 1" thick
(optional 2" thick) filter. The grille face shall be secured in
place with thumb latches. The units shall be the size and
quantity as outlined in the plans and specifications. The
border shall be 1 1/4" wide with aerodynamically shaped
deflector blades on 2/3" center set at 40.
Optional opposed blade damper shall be constructed of
RHF
GR140 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
RHF MODEL NUMBER SPECIFICATION
RETURN FILTER GRILLE FIXED HORIZONTAL BLADES SURFACE MOUNT
Model Neck
RHF-1 Aluminum 6 8 10 12 14 16 18 20 22 24 26
RHEF-1 Extruded Aluminum 4 X X X X X X X X X X X
SRHF-1 Steel 5 X X X X X X X X X X X
FILTER GRILLES
6 X X X X X X X X X X X
8 X X X X X X X X X X X
10 X X X X X X X X X X X
12 X X X X X X X X X X X
14 X X X X X X X X X X X
16 X X X X X X X X X X X
18 X X X X X X X X X X X
20 X X X X X X X X X X X
22 X X X X X X X X X X X
24 X X X X X X X X X X X
26 X X X X X X X X X X X
RHF
28 X X X X X X X X X X X
30 X X X X X X X X X X X
32 X X X X X X X X X X X
34 X X X X X X X X X X X
36 X X X X X X X X X X X
38 X X X X X X X X X X X
40 X X X X X X X X X X X
42 X X X X X X X X X X X
44 X X X X X X X X X X X
46 X X X X X X X X X X X
48 X X X X X X X X X X X
Available Options
NSH No Screw Holes
CM Concealed Mounting
FF 2" Filter Frame
6 X X X X X X X X X X X
8 X X X X X X X X X X X
10 X X X X X X X X X X X
12 X X X X X X X X X X X
14 X X X X X X X X X X X
16 X X X X X X X X X X X
18 X X X X X X X X X X X
20 X X X X X X X X X X X
22 X X X X X X X X X X X
24 X X X X X X X X X X X
26 X X X X X X X X X X X
RHF
28 X X X X X X X X X X X
30 X X X X X X X X X X X
32 X X X X X X X X X X X
34 X X X X X X X X X X X
36 X X X X X X X X X X X
38 X X X X X X X X X X X
40 X X X X X X X X X X X
42 X X X X X X X X X X X
44 X X X X X X X X X X X
46 X X X X X X X X X X X
48 X X X X X X X X X X X
Available Options
NSH No Screw Holes
CM Concealed Mounting
FF 2" Filter Frame
GR142 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES RHF MODEL NUMBER SPECIFICATION
FILTER RETURN GRILLE - FIXED HORIZONTAL BLADES - LAY-IN
Model Neck
RHF-6 Aluminum 6 8 10 12 14 16 18 20 22 24 Module
RHEF-6 Extruded Aluminum 4 X X
SRHF-6 Steel 6 X X
12 x 12
FILTER GRILLES
8 X X
10 X
4 X X X X X X X X
6 X X X X X X X X
24 x 12
8 X X X X X X X X
10 X
4 X X X X X X X X
6 X X X X X X X X
8 X X X X X X X X
10 X X X X X X X X
12 X X X X X X X X
RHF
24 x 24
14 X X X X X X X X
16 X X X X X X X X
18 X X X X X X X X
20 X X X X X X X X
22 X
4 X X X X X X X X X X
6 X X X X X X X X X X
8 X X X X X X X X X X
10 X X X X X X X X X X
12 X X X X X X X X X X 48 x 24
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
8 X X X X X X X X X X
10 X X X X X X X X X X
12 X X X X X X X X X X
48 x 24
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
22 X
GR144 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES RHF PERFORMANCE DATA
MODEL RHF, RHEF, SRHF
Nk Vel 200 300 400 500 600 700 800 900 1000
Size Duct Area ft
Ps -.009 -.020 -.036 -.056 -.081 -.110 -.143 -.181 -.223
CFM 39 58 77 96 115 134 153 172 191
06x06 .25
NC - - 15 20 25 29 32 35 38
FILTER GRILLES
CFM 53 79 106 132 159 185 212 238 265
08x06 .33
NC - - 16 21 26 30 34 37 39
CFM 69 103 137 171 205 239 273 307 341
10x06 .42
NC - - 17 23 27 31 35 38 40
CFM 75 112 149 186 223 260 297 334 371
08x08 .44
NC - 12 18 23 28 32 36 39 41
CFM 83 124 165 206 247 288 329 370 411
12x06 .50
NC - 12 18 23 28 32 36 39 41
16x06 CFM 115 172 229 286 343 400 457 514 571
.67
12x08 NC - 12 19 25 30 34 37 40 43
RHF
CFM 119 178 237 296 355 414 473 532 591
10x10 .69
NC - 12 19 25 30 34 37 40 43
12x10 CFM 145 217 289 361 433 505 577 649 721
.83
20x06 NC - 13 20 26 31 35 38 41 44
24x06 CFM 177 265 353 441 529 617 705 793 881
1.00
12x12 NC - 14 21 27 32 36 39 42 45
CFM 245 367 489 611 733 855 977 1099 1221
14x14 1.36
NC - 15 22 28 33 37 40 43 46
18x12 CFM 271 406 541 676 811 946 1081 1216 1351
1.50
36x06 NC - 16 23 29 33 37 41 44 47
18x16 CFM 365 547 729 911 1093 1275 1457 1639 1821
2.00
24x12 NC 11 17 24 30 35 39 42 45 48
CFM 415 622 829 1036 1243 1450 1657 1864 2071
18x18 2.25
NC 11 17 25 31 35 39 43 46 48
CFM 459 688 917 1146 1375 1604 1833 2062 2291
30x12 2.50
NC 12 18 25 31 36 40 43 46 49
CFM 515 772 1029 1286 1543 1800 2057 2314 2571
20x20 2.78
NC 12 18 26 31 36 40 43 47 49
24x18 CFM 551 826 1101 1376 1651 1926 2201 2476 2751
3.00
36x12 NC 13 19 26 32 36 40 44 47 50
CFM 629 943 1257 1571 1885 2199 2513 2827 3141
22x22 3.36
NC 13 19 27 32 37 41 44 47 50
48x12 CFM 752 1127 1503 1878 2254 2630 3005 3381 3756
4.00
24x24 NC - 20 28 33 38 42 46 49 51
CONTINUED
Nk Vel 200 300 400 500 600 700 800 900 1000
Size Duct Area ft
Ps -.009 -.020 -.036 -.056 -.081 -.110 -.143 -.181 -.223
48x18 CFM 1133 1699 2265 2831 3397 3963 4529 5095 5661
6.00
36x24 NC 11 22 29 35 40 44 47 50 53
FILTER GRILLES
48x24 CFM 1527 2290 3053 3816 4579 5342 6105 6868 7631
8.00
36x32 NC 13 24 31 37 42 46 49 52 55
CFM 2315 3472 4629 5786 6943 8100 9257 10414 11571
48x36 12.00
NC 14 25 32 38 43 47 50 53 56
CFM 3102 4653 6204 7755 9306 10857 12408 13959 15510
48x48 16.00
NC 16 26 33 39 44 48 51 54 57
DEFINITION OF UNITS
CFM Cubic Feet per Minute (Air)
Nk Vel Neck velocity of air stream in Feet Per Minute
Ps Negative Static pressure (inches of water column)
NC Noise criterion, sound pressure level. NC ratings are based on sound power level (Lw)
RE: 10-12 watts minus a 10dB room attenuation in all octave bands.
GR146 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
MODEL CC5F
The CC5F series of cubed core filter grilles is designed to provide low
pressure drop and sound levels. The units are aluminum construction
andProject:
have a 1/2" x 1/2" x 1/2" grid core.
Tag:
Optional stainless steel construction
Engineer:
Hinged face for easy access to the filter
FILTER GRILLES
Contractor: Submittal: CC5F
Optional fully removable face
Date:
Filter Back
Standard Return
1" filter rack Grilles and Registers
Aluminum - 1/2" x 1/2" x 1/2" Cube Core
Optional 2" filter rack
Models: CC5F-1 Return Grille - Surface Mount
CC5F-6 Return Grille - Lay In T-Bar
CC5F
1 5
14 32
core. The units shall include a hinged face and integral Process shall be anodic electro-deposition using an
frame designed to accept a 1" thick (optional 2" thick) anodic acrylic paint. Units shall undergo pre-treatment
filter. The grille face shall be secured in place with thumb including a pressurized spray stage using an alkaline
latches. The units shall be the size and quantity as cleaner and a de-ionized water rinse.
outlined in the plans and specifications. The border shall
be 1 1/4" wide. The units shall be designed for surface
mounting with countersunk screw holes on the face of the
device or T-bar Lay-in applications.
Optional opposed blade damper shall be constructed of
steel (Model OBD) or aluminum (Model OBDA).
Damper must be operable from the face of the diffuser.
CC5F
GR148 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
CC5F MODEL NUMBER SPECIFICATION
CUBED CORE FILTER RETURN ALUMINUM 1/2" X 1/2" X 1/2"
Model Neck
CC5F-1 Surface Mount 6 8 10 12 14 16 18 20 22 24 26
4 X X X X X X X X X X X
5 X X X X X X X X X X X
FILTER GRILLES
6 X X X X X X X X X X X
8 X X X X X X X X X X X
10 X X X X X X X X X X X
12 X X X X X X X X X X X
14 X X X X X X X X X X X
16 X X X X X X X X X X X
18 X X X X X X X X X X X
20 X X X X X X X X X X X
22 X X X X X X X X X X X
24 X X X X X X X X X X X
26 X X X X X X X X X X X
CC5F
28 X X X X X X X X X X X
30 X X X X X X X X X X X
32 X X X X X X X X X X X
34 X X X X X X X X X X X
36 X X X X X X X X X X X
38 X X X X X X X X X X X
40 X X X X X X X X X X X
42 X X X X X X X X X X X
44 X X X X X X X X X X X
46 X X X X X X X X X X X
48 X X X X X X X X X X X
Available Options
NSH No Screw Holes
CM Concealed Mounting
6 X X X X X X X X X X X
8 X X X X X X X X X X X
10 X X X X X X X X X X X
12 X X X X X X X X X X X
14 X X X X X X X X X X X
16 X X X X X X X X X X X
18 X X X X X X X X X X X
20 X X X X X X X X X X X
22 X X X X X X X X X X X
24 X X X X X X X X X X X
26 X X X X X X X X X X X
CC5F
28 X X X X X X X X X X X
30 X X X X X X X X X X X
32 X X X X X X X X X X X
34 X X X X X X X X X X X
36 X X X X X X X X X X X
38 X X X X X X X X X X X
40 X X X X X X X X X X X
42 X X X X X X X X X X X
44 X X X X X X X X X X X
46 X X X X X X X X X X X
48 X X X X X X X X X X X
Available Options
NSH No Screw Holes
CM Concealed Mounting
GR150 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
CC5F MODEL NUMBER SPECIFICATION
CUBED CORE FILTER RETURN ALUMINUM 1/2" X 1/2" X 1/2"
Model Neck
CC5F-6 T-bar Lay-in 6 8 10 12 14 16 18 20 22 24 Module
4 X X
6 X X
12 x 12
FILTER GRILLES
8 X X
10 X
4 X X X X X X X X
6 X X X X X X X X
24 x 12
8 X X X X X X X X
10 X
4 X X X X X X X X
6 X X X X X X X X
8 X X X X X X X X
10 X X X X X X X X
12 X X X X X X X X
CC5F
24 x 24
14 X X X X X X X X
16 X X X X X X X X
18 X X X X X X X X
20 X X X X X X X X
22 X
4 X X X X X X X X X X
6 X X X X X X X X X X
8 X X X X X X X X X X
10 X X X X X X X X X X
12 X X X X X X X X X X 48 x 24
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
8 X X X X X X X X X X
10 X X X X X X X X X X
12 X X X X X X X X X X
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
22 X X X X X X X X X X
24 X X X X X X X X X X 48 x 48
26 X X X X X X X X X X
28 X X X X X X X X X X
CC5F
30 X X X X X X X X X X
32 X X X X X X X X X X
34 X X X X X X X X X X
36 X X X X X X X X X X
38 X X X X X X X X X X
40 X X X X X X X X X X
42 X X X X X X X X X X
44 X X X X X X X X X X
GR152 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
CC5F MODEL NUMBER SPECIFICATION
CUBED CORE FILTER RETURN ALUMINUM 1/2" X 1/2" X 1/2"
Model Neck
CC5F-6 T-bar Lay-in 26 28 30 32 34 36 38 40 42 44 46 Module
4 X X X X X X X X X X
6 X X X X X X X X X X
8 X X X X X X X X X X
FILTER GRILLES
10 X X X X X X X X X X
12 X X X X X X X X X X
48 x 24
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
22 X
4 X X X X X X X X X X
6 X X X X X X X X X X
8 X X X X X X X X X X
10 X X X X X X X X X X
CC5F
12 X X X X X X X X X X
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
22 X X X X X X X X X X
24 X X X X X X X X X X
48 x 48
26 X X X X X X X X X X
28 X X X X X X X X X X
30 X X X X X X X X X X
32 X X X X X X X X X X
34 X X X X X X X X X X
36 X X X X X X X X X X
38 X X X X X X X X X X
40 X X X X X X X X X X
42 X X X X X X X X X X
44 X X X X X X X X X X
46 X
08x06 .33
NC - - - - - 15 19 23 27
CFM 77 115 154 192 230 268 307 345 383
10x06 .42
NC - - - - 11 16 20 24 28
CFM 83 125 166 204 249 291 332 374 415
08x08 .44
NC - - - - 11 16 21 25 28
CFM 92 139 185 232 279 325 372 418 465
12x06 .50
NC - - - - 12 17 21 25 29
16x06 CFM 126 189 253 317 378 442 506 570 630
.67
12x08 NC - - - - 13 18 22 26 30
CC5F
CFM 131 196 261 327 392 457 522 588 653
10x10 .69
NC - - - - 13 18 22 26 30
12x10 CFM 157 235 313 391 469 547 625 703 781
.83
20x06 NC - - - - 13 18 23 26 30
24x06 CFM 191 287 382 478 573 669 764 860 955
1.00
12x12 NC - - - - 14 19 24 28 31
CFM 260 390 520 650 780 910 1040 1169 1299
14x14 1.36
NC - - - - 15 20 25 29 32
18x12 CFM 287 430 573 717 860 1003 1146 1290 1433
1.50
36x06 NC - - - - 16 21 25 29 33
18x16 CFM 382 573 764 955 1146 1337 1528 1719 1910
2.00
24x12 NC - - - 11 17 22 26 30 33
CFM 430 645 860 1075 1290 1505 1719 1934 2149
18x18 2.25
NC - - - 11 17 22 26 30 34
CFM 478 717 955 1194 1433 1672 1910 2149 2388
30x12 2.50
NC - - - 11 17 23 27 31 34
CFM 531 797 1062 1328 1593 1859 2124 2390 2655
20x20 2.78
NC - - - 12 18 23 27 31 35
24x18 CFM 573 860 1146 1433 1719 2006 2292 2579 2865
3.00
36x12 NC - - - 12 18 23 28 32 35
CFM 642 963 1284 1605 1926 2247 2568 2888 3209
22x22 3.36
NC - - - 12 18 23 28 32 35
48x12 2 CFM 768 1152 1536 1920 2304 2688 3072 3456 3840
4.00
4x24 NC - - - 13 19 24 29 33 36
48x18 CFM 1152 1728 2304 2880 3456 4032 4608 5184 5760
6.00
36x24 NC - - - 15 21 26 30 34 38
CONTINUED
GR154 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES CC5F PERFORMANCE DATA
MODEL CC5F
Nk Vel 200 300 400 500 600 700 800 900 1000
Size Duct Area ft
Ps -.006 -.013 -.024 -.037 -.054 -.073 -.095 -.120 -.149
48x24 CFM 1536 2304 3072 3840 4608 5376 6144 6912 7680
8.00
36x32
NC - - - 16 22 27 31 35 39
FILTER GRILLES
CFM 2304 3456 4608 5760 6912 8064 9216 10368 11520
48x36 12.00
NC - - 11 17 23 28 33 37 40
CFM 3072 4608 6144 7680 9216 10752 12288 13824 15360
48x48 16.00
NC - - 12 18 24 29 34 38 41
DEFINITION OF UNITS
CFM Cubic Feet per Minute (Air)
CC5F
Velocity Neck Velocity of air stream in Feet Per Minute
Ps Negative Static pressure = PtPv (inches of water column)
NC Noise criterion, Sound pressure level. NC ratings are based on sound power level (Lw)
RE: 10-12 watts minus a 10dB room attenuation in all octave bands.
MODEL RPF
The RPF series of perforated filter grilles is designed to blend into
the ceiling system and provide a clean, uncluttered architectural
appearance. The RPF series is available in aluminum (RPF) and steel
(SRPF) construction.
Project:
Optional stainless steel construction
FILTER GRILLES
Tag:
Hinged face for easy access to the filter
Engineer:
Contractor:
Optional fully removable face Submittal: RPF
Date:
Standard 1" filter rack
Filter Back Return Grilles and Registers
Optional 2" filter
Perforated Facerack- Aluminum
Project:
Models:
Tag: RPF-1 Return Grille - Surface Mount
Engineer: RPF-6 Return Grille - Lay in T-Bar
Contractor: Submittal: RPF
Date:Model: RPF-1 ( Return Grille - Surface Mount ) Face view
Face view Removable Face
Filter Filter
Back Return Grilles
Back Accepts
Disposable Filters
Listed and
Size + 238Registers
Face view
Overall Dimensions W x H
Model: RPF-6 ( Return Grille - Lay in T-Bar )
Rotating Fastener 23 3/4 x 23 3/4 47 3/4 x 23 3/4
T-Bar Module = Grid Size
Filter Back Accepts Overall Grille Size = T-Bar Module = Grid Size
Disposable Dimension Disposable Dimension
Disposable Options:
Damper Filters T-Bar Module - 41 Filter Thickness A Size
Overall Grille = Filter Thickness BB
Disposable Filter Thickness Dimension A Disposable Filter Thickness Dimension
Duct SizeListed
= Listed 1
Size -Size 2-7/16 - 1
1" T- Bar Module 1" 3-15/16
8 4 Options:
Listed Size - 1 1 Options: 2 7/16 1Listed Size
2"Duct Size =3-7/16 2" 3 15/16
4-15/16
A 8 1
OBD OR OBDA Listed Size - 8 Opposed
2 Opposed Blade3Damper
7/16 2 4 15/16Blade
Damper
B Damper Operator B Damper Operator
(Screwdriver Slot) (Screwdriver Slot)
T-Bar Module = Grid Size
15
Damper Options: Overall Grille Size =
16
Duct Size = Listed Size T- Bar Module - 41
28 1 Options:
Listed Size - 1 Options: Duct Size = Listed Size
8 1
OBD OR OBDA Height Listed Size - 8 Opposed Blade
Overall Face = Listed Size + 2 38 Opposed Blade Damper
Damper
B Damper Operator B Damper Operator
(Screwdriver Slot) (Screwdriver Slot)
TR (A)/TR Deep (B) Transition Square/
15
Rectangular To Round 16
1
28
Notes: (check if provided)
Height
1. Available Finishes
Overall Face = Listed Size + 2 38 Accessories
2. Available 3. Available Options 4. Construction Details
Standard Finish: OBD - Steel Opposed Blade Damper Insect Screen Frame and perforated face
01 White. OBDA - Aluminum Opposed Blade Removable face are Aluminum.
Optional Finish (no extra Charge): Damper.TR (A)/TR Deep (B) Transition 2" FF-2" Filter Rack
Square/ Can Be ordered to fit standard
24 Mill Finish L9 - Equalizing Grid.
Rectangular To Round T-Bar panels.
Optional Finish (extra Charge): PF - Plaster Frame. Maximum one-piece size 48" x36
02 Satin Silver TBPF - T-Bar Plaster Frame. Filter Size:
Notes: (check if provided)
03 Black. TR - Transition from Square/Rectangular to Listed Size - 1/8
GR1561. Available
28 CustomFinishes
Color / Setup Charge 2. Available
Round Accessories 22 Industries, Inc. For3.complete
Up to 22 x Metal Available
productOptions
specifications and4. Construction
submittal Details
data, visit us at www.metalaire.com
Standard Finish: TR-Deep-
OBD - SteelUsed with Dampers
Opposed Blade Damper Insect Screen Frame and perforated face
01 White. LIPF - -Lay-In
OBDA Plaster
Aluminum Frame Blade
Opposed Removable face are Aluminum.
REGISTERS
GRILLES &
SERIES RPF SPECIFICATIONS
RETURN FILTER GRILLE PERFORATED Performance Specification
ALUMINUM/STEEL MODELS RPF/SRPF The manufacturer shall provide published performance
Air inlets shall be model RPF/SRPF manufactured by data. Data shall be tested in accordance to ANSI/
METALAIRE. Units shall be perforated face return filter ASHRAE Standard 70-2006.
or exhaust grilles of aluminum (RPF) or steel (SPRF)
construction. The units shall include a hinged face Paint Specification
FILTER GRILLES
and integral frame designed to accept a 1" thick (optional Process shall be anodic electro-deposition using an
2" thick) filter. The grille face shall be secured in place anodic acrylic paint. Units shall undergo pre-treatment
with thumb latches. The units shall be the size and including a pressurized spray stage using an alkaline
quantity as outlined in the plans and specifications. cleaner and a de-ionized water rinse.
The border shall be 1 1/4" wide with a perforated face
of 3/16" diameter holes on 1/4" center for a 51% free
area. Units shall be designed for surface mounting with
countersunk screw holes on the face of the device or T-bar
Lay-in applications.
Optional opposed blade damper shall be constructed of
steel (Model OBD) or aluminum (Model OBDA).
RPF
Damper must be operable from the face of the register.
6 X X X X X X X X X X X
8 X X X X X X X X X X X
10 X X X X X X X X X X X
12 X X X X X X X X X X X
14 X X X X X X X X X X X
16 X X X X X X X X X X X
18 X X X X X X X X X X X
20 X X X X X X X X X X X
22 X X X X X X X X X X X
24 X X X X X X X X X X X
26 X X X X X X X X X X X
RPF
28 X X X X X X X X X X X
30 X X X X X X X X X X X
32 X X X X X X X X X X X
34 X X X X X X X X X X X
36 X X X X X X X X X X X
Available Options
NSH No Screw Holes
CM Concealed Mounting
GR158 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
RPF MODEL NUMBER SPECIFICATION
PERFORATED FILTER GRILLE ALUMINUM/STEEL
Model Neck
RPF-1 Aluminum Surface Mount 28 30 32 34 36 38 40 42 44 46 48
SRPF-1 Steel Surface Mount 4 X X X X X X X X X X X
5 X X X X X X X X X X X
FILTER GRILLES
6 X X X X X X X X X X X
8 X X X X X X X X X X X
10 X X X X X X X X X X X
12 X X X X X X X X X X X
14 X X X X X X X X X X X
16 X X X X X X X X X X X
18 X X X X X X X X X X X
20 X X X X X X X X X X X
22 X X X X X X X X X X X
24 X X X X X X X X X X X
26 X X X X X X X X X X X
RPF
28 X X X X X X X X X X X
30 X X X X X X X X X X X
32 X X X X X X X X X X X
34 X X X X X X X X X X X
36 X X X X X X X X X X X
Available Options
NSH No Screw Holes
CM Concealed Mounting
8
10 X
4 X X X X X X X X
6 X X X X X X X X
24 x 12
8 X X X X X X X X
10 X
4 X X X X X X X X
6 X X X X X X X X
8 X X X X X X X X
10 X X X X X X X X
12 X X X X X X X X
RPF
24 x 24
14 X X X X X X X X
16 X X X X X X X X
18 X X X X X X X X
20 X X X X X X X X
22 X
4 X X X X X X X X X X
6 X X X X X X X X X X
8 X X X X X X X X X X
10 X X X X X X X X X X
12 X X X X X X X X X X 48 x 24
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
GR160 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
RPF MODEL NUMBER SPECIFICATION
PERFORATED FILTER GRILLE ALUMINUM/STEEL
Model Neck
RPF-6 Aluminum - Lay-in 26 28 30 32 34 36 38 40 42 44 46 Module
SRPF-6 Steel - Lay-in 4 X X X X X X X X X X
6 X X X X X X X X X X
FILTER GRILLES
8 X X X X X X X X X X
10 X X X X X X X X X X
12 X X X X X X X X X X
48 x 24
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
22 X
RPF
Standard OBD Steel Opposed Blade Damper
01 White OBDA Aluminum Opposed Blade Damper
Optional TBPF T-bar Plaster Frame
02 Satin Silver IS Insect Screen
03 Black TR Square to Round Transition
24 Mill (Aluminum Construction Only) TR Deep Deep Square to Round Transition
28 Custom Color
Nk Vel 300 400 500 600 700 800 900 1000 1100
Size Duct Area ft
Ps -.023 -.041 -.064 -.092 -.126 -.165 -.209 -.259 -.314
CFM 58 77 96 116 135 154 173 192 212
06x06 .25
NC - - 13 16 18 21 22 24 25
FILTER GRILLES
NC - 15 18 21 23 25 27 29 30
CFM 190 253 316 379 442 505 568 631 695
18x06 .75
NC 11 15 18 21 24 26 28 29 31
24x06 CFM 265 353 441 529 617 705 793 881 970
1.00
12x12 NC 12 16 20 23 25 27 29 31 32
30x06 CFM 334 445 556 667 778 889 1000 1111 1223
1.25
18x10 NC 13 17 21 24 26 28 30 32 33
36x06 CFM 406 541 676 811 946 1081 1216 1351 1487
1.50
18x12 NC 14 18 22 25 27 29 31 32 34
42x06 CFM 478 637 796 955 1114 1273 1432 1591 1751
1.75
18x14 NC 15 19 22 25 28 30 32 33 35
24x12 CFM 547 729 911 1093 1275 1457 1639 1821 2004
2.00
18x16 NC 15 20 23 26 28 30 32 34 35
CFM 688 917 1146 1375 1604 1833 2062 2291 2521
30x12 2.50
NC 16 21 24 27 29 31 33 35 36
CFM 826 1101 1376 1651 1926 2201 2476 2751 3027
36x12 3.00
NC 17 21 25 28 30 32 34 35 37
42x12 CFM 967 1289 1611 1933 2255 2577 2899 3221 3544
3.50
36x14 NC 17 22 25 28 31 33 34 36 38
48x12 CFM 1126 1501 1876 2251 2626 3001 3376 3751 4127
4.00
24x24 NC 18 23 26 29 31 34 35 37 38
36x20 CFM 1414 1885 2356 2827 3298 3769 4240 4711 5183
5.00
30x24 NC 19 24 27 30 32 34 36 38 39
48x18 CFM 1699 2265 2831 3397 3963 4529 5095 5661 6228
6.00
36x24 NC 20 24 28 31 33 35 37 39 40
48x24 CFM 2290 3053 3816 4579 5342 6105 6868 7631 8395
8.00
36x32 NC 21 26 39 32 34 36 38 40 41
CONTINUED
GR162 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES RPF PERFORMANCE DATA
MODEL RPF
Nk Vel 300 400 500 600 700 800 900 1000 1100
Size Duct Area ft
Ps -.023 -.041 -.064 -.092 -.126 -.165 -.209 -.259 -.314
CFM 3472 4629 5786 6943 8100 9257 10414 11571 12729
48x36 12.00
NC 23 28 31 34 36 38 40 42 43
FILTER GRILLES
CFM 4653 6204 7755 9306 10857 12408 13959 15510 17061
48x48 16.00
NC 24 29 32 35 37 40 41 43 44
DEFINITION OF UNITS
CFM Cubic Feet per Minute (Air)
Nk Vel Neck velocity of air stream in Feet Per Minute
Ps Negative Static pressure (inches of water column)
NC Noise criterion, Sound pressure level. NC ratings are based on sound power level (lw)
RE: 10-12 watts minus a 10dB room attenuation in all octave bands.
RPF
MODEL 4500
HDRH
GR164 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
MODEL HDRH
The HDRH series of heavy duty grilles is an excellent choice for
projects that require a grille or register to withstand moderate
physical abuse. Applications for the HDRH include common areas
in schools, hospitals and other high traffic areas. The HDRH is
Deflection blades are assembled in the outer frame using metal screws for added rigidity
HDRH
Model: HDRH-1 (1 1/3 Blade Spacing Louver Grille - Surface Mount )
1.33 Typ Listed Size
Duct Size = Listed Size Face View 1
+22
1
Listed Size - 4
31 31
8 8
1.33 Typ Listed Size
1
Listed Size + 2 2 1
+22
15 Horizontal
1 8 1
38 Deflecting Vanes 3 8
1
Option: HDRHD-1 (1 1/3 Blade Spacing Louver Register - Listed Size + 2 2
15
Surface Mount - With Opposed Blade Damper )
Horizontal
8
Deflecting Vanes
487
15 Horizontal Deflecting Vanes
8 1
38
GR166 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
HDRH MODEL NUMBER SPECIFICATIONS
HEAVY DUTY RETURN
Model Neck
HDRH-1 Aluminum Surface Mount 6 8 10 12 14 16 18 20 22 24 26
4 X X X X X X X X X X X
HDRH
28 X X X X X X X X X X X
30 X X X X X X X X X X X
32 X X X X X X X X X X X
34 X X X X X X X X X X X
36 X X X X X X X X X X X
38 X X X X X X X X X X X
40 X X X X X X X X X X X
42 X X X X X X X X X X X
44 X X X X X X X X X X X
46 X X X X X X X X X X X
48 X X X X X X X X X X X
5 X X X X X X X X X X X
6 X X X X X X X X X X X
8 X X X X X X X X X X X
10 X X X X X X X X X X X
12 X X X X X X X X X X X
14 X X X X X X X X X X X
16 X X X X X X X X X X X
18 X X X X X X X X X X X
20 X X X X X X X X X X X
22 X X X X X X X X X X X
24 X X X X X X X X X X X
26 X X X X X X X X X X X
HDRH
28 X X X X X X X X X X X
30 X X X X X X X X X X X
32 X X X X X X X X X X X
34 X X X X X X X X X X X
36 X X X X X X X X X X X
38 X X X X X X X X X X X
40 X X X X X X X X X X X
42 X X X X X X X X X X X
44 X X X X X X X X X X X
46 X X X X X X X X X X X
48 X X X X X X X X X X X
GR168 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES HDRH PERFORMANCE DATA
MODEL HDRH
Nk Vel 200 300 400 500 600 700 800 1000 1200
Size Duct Area ft
Ps -.002 -.005 -.009 -.014 -.020 -.027 -.036 -.056 -.080
CFM 50 75 100 125 150 175 200 250 300
16x06 CFM 133 200 267 333 400 467 533 667 800
.67
12x08 NC 15 16 18 20 21 23 25 28 31
CFM 167 250 333 417 500 583 667 833 1000
12x10 .83
HDRH
NC 16 17 19 21 22 24 26 29 32
24x06 CFM 200 300 400 500 600 700 800 1000 1200
1.00
12x12 NC 16 18 20 21 23 25 26 30 33
CFM 233 350 467 583 700 817 933 1167 1400
14x12 1.16
NC 17 19 20 22 24 25 27 30 34
CFM 272 408 544 681 817 953 1089 1361 1633
14x14 1.36
NC 18 19 21 23 24 26 28 31 34
CFM 450 675 900 1125 1350 1575 1800 2250 2700
18x18 2.25
NC 20 22 23 25 27 28 30 33 37
24x12 CFM 400 600 800 1000 1200 1400 1600 2000 2400
2.00
18x16 NC 19 21 23 24 26 28 29 33 36
CFM 600 900 1200 1500 1800 2100 2400 3000 3600
24x18 3.00
NC 21 23 24 26 28 30 31 35 38
48x12 CFM 800 1200 1600 2000 2400 2800 3200 4000 4800
4.00
24x24 NC 22 24 26 27 29 31 32 36 39
CFM 833 1250 1667 2083 2500 2917 3333 4167 5000
30x20 4.17
NC 23 24 26 28 29 31 33 36 39
36x20 CFM 1000 1500 2000 2500 3000 3500 4000 5000 6000
5.00
30x24 NC 23 25 27 28 30 32 33 37 40
CFM 1100 1650 2200 2750 3300 3850 4400 5500 6600
36x22 5.50
NC 24 25 27 29 30 32 34 37 41
CONTINUED
Nk Vel 200 300 400 500 600 700 800 1000 1200
Size Duct Area ft
Ps -.002 -.005 -.009 -.014 -.020 -.027 -.036 -.056 -.080
48x18 CFM 1200 1800 2400 3000 3600 4200 4800 6000 7200
HEAVY DUTY GRILLES
6.00
36x24 NC 24 26 28 29 31 33 34 38 41
48x24 CFM 1600 2400 3200 4000 4800 5600 6400 8000 9600
8.00
36x32 NC 25 27 29 30 32 34 35 39 42
48x30 CFM 2000 3000 4000 5000 6000 7000 8000 10000 -
10.00
42x34 NC 26 28 30 31 33 35 36 40 -
CFM 2400 3600 4800 6000 7200 8400 9600 - -
48x36 12.00
NC 27 29 31 32 34 36 37 - -
CFM 2667 4000 5333 6667 8000 9333 - - -
48x40 13.33
NC 28 29 31 33 34 36 - - -
HDRH
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Nk Vel Neck Velocity of air stream in Feet per Minute
Ps Negative Static pressure (inches of water column)
NC Noise criterion, Sound pressure level. NC ratings are based on sound power level (Lw)
RE: 10-12 watts minus a 10dB room attenuation in all octave bands.
GR170 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
MODEL 4500
The 4500 series heavy duty return grille is designed for
applications such as gymnasiums, manufacturing facilities,
warehouses and public areas. The border and deflection blades are
heavy gauge steel and built to withstand moderate physical abuse.
4500
deflector blades and 16 gauge borders. The grilles shall Paint Specification
be designed to withstand moderate physical abuse. The Process shall be anodic electro-deposition using an
units shall be the size and quantity as outlined in the anodic acrylic paint. Units shall undergo pre-treatment
plans and specifications. including a pressurized spray stage using an alkaline
Border shall be 1 1/4" wide with aerodynamically shaped cleaner and a de-ionized water rinse.
deflector blades on 2/3" center. Deflector blades shall
be fixed. Units shall be designed for surface mounting
applications and be provided with countersunk screw
holes on the face of the device.
Optional opposed blade damper shall be constructed of
steel (Model OBD) or aluminum (Model OBDA).
Damper must be operable from the face of the diffuser.
4500
GR172 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES 4500 MODEL NUMBER SPECIFICATION
HEAVY DUTY GYM GRILLE STEEL SURFACE MOUNT
Model Neck
4500 0 Deflection 6 8 10 12 14 16 18 20 22 24 26
4538 38 Deflection 4 X X X X X X X X X X X
4500
28 X X X X X X X X X X X
30 X X X X X X X X X X X
32 X X X X X X X X X X X
34 X X X X X X X X X X X
36 X X X X X X X X X X X
38 X X X X X X X X X X X
40 X X X X X X X X X X X
42 X X X X X X X X X X X
44 X X X X X X X X X X X
46 X X X X X X X X X X X
48 X X X X X X X X X X X
Available Options
NSH No Screw Holes
CM Concealed Mounting
5 X X X X X X X X X X X
6 X X X X X X X X X X X
8 X X X X X X X X X X X
10 X X X X X X X X X X X
12 X X X X X X X X X X X
14 X X X X X X X X X X X
16 X X X X X X X X X X X
18 X X X X X X X X X X X
20 X X X X X X X X X X X
22 X X X X X X X X X X X
24 X X X X X X X X X X X
26 X X X X X X X X X X X
4500
28 X X X X X X X X X X X
30 X X X X X X X X X X X
32 X X X X X X X X X X X
34 X X X X X X X X X X X
36 X X X X X X X X X X X
38 X X X X X X X X X X X
40 X X X X X X X X X X X
42 X X X X X X X X X X X
44 X X X X X X X X X X X
46 X X X X X X X X X X X
48 X X X X X X X X X X X
Available Options
NSH No Screw Holes
CM Concealed Mounting
GR174 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES 4500 PERFORMANCE DATA
MODEL 4500
Nk Vel 300 400 500 600 700 800 900 1000 1200
Size Duct Area ft
Ps -.012 -.022 -.034 -.049 -.067 -.087 -.110 -.136 -.196
CFM 63 84 105 126 147 168 189 210 252
4500
24x06 CFM 276 367 459 551 643 735 827 918 1102
1.00
12x12 NC - - - 22 26 28 33 34 38
CFM 323 431 539 647 755 863 970 1078 1294
14x12 1.16
NC - - 20 23 27 29 34 35 39
CFM 380 506 633 759 886 1013 1139 1139 1524
14x14 1.36
NC - - 21 24 28 30 35 36 40
CFM 638 851 1063 1276 1489 1701 1914 2127 2552
18x18 2.25
NC - 21 23 26 30 32 37 38 42
24x12 CFM 563 751 938 1126 1314 1501 1689 1877 2252
2.00
18x16 NC - 20 22 25 29 31 36 37 41
CFM 857 1142 1428 1714 1999 2285 2570 2856 3427
24x18 3.00
NC - 22 24 27 31 33 38 39 43
48x12 CFM 1151 1534 1918 2301 2685 3068 3452 3835 4602
4.00
24x24 NC 21 24 26 29 33 35 40 41 45
CFM 1198 1598 1997 2397 2797 3196 3595 3995 4794
30x20 4.17
NC 21 24 26 29 33 35 40 41 45
36x20 CFM 1444 1926 2407 2889 3370 3851 4333 4814 5777
5.00
30x24 NC 22 25 27 30 34 36 41 42 46
CFM 1590 2120 2650 3180 3710 4240 4770 5300 6360
36x22 5.50
NC 22 25 27 30 34 36 41 42 46
48x18 CFM 1738 2317 2897 3476 4055 4635 5214 5793 6952
6.00
36x24 NC 22 25 27 30 34 36 41 42 46
48x24 CFM 2326 3101 3876 4651 5426 6201 6977 7752 9302
8.00
36x32 NC 24 27 29 32 36 38 43 44 48
48x30 CFM 2919 3892 4865 5839 6812 7785 8758 9731 11677
10.00
42x34 NC 25 28 30 33 37 39 44 45 49
CONTINUED
Nk Vel 300 400 500 600 700 800 900 1000 1200
Size Duct Area ft
Ps -.012 -.022 -.034 -.049 -.067 -.087 -.110 -.136 -.196
HEAVY DUTY GRILLES
CFM 3513 4684 5855 7026 8197 9368 10539 11710 14052
48x36 12.00
NC 25 28 30 33 37 39 44 45 49
CFM 3909 5212 6515 7818 9121 10424 11727 13030 15635
48x40 13.33
NC 26 29 31 24 28 40 45 46 50
CFM 4701 6267 7837 9401 10968 12535 14102 15668 18802
48x48 16.00
NC 27 30 32 35 39 41 46 47 51
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Nk Vel Neck Velocity of air stream in Feet per Minute
Ps Negative Static pressure (inches of water column)
NC Noise criterion, Sound pressure level. NC ratings are based on sound power level (Lw)
RE: 10-12 watts minus a 10dB room attenuation in all octave bands.
GR176 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES 4500 PERFORMANCE DATA
MODEL 4538
Nk Vel 300 400 500 600 700 800 900 1000 1200
Size Duct Area ft
Ps -.012 -.022 -.034 -.049 -.067 -.087 -.110 -.136 -.196
CFM 63 84 105 126 147 168 189 210 252
16x06 CFM 180 240 299 359 419 479 539 599 719
.67
12x08 NC - - - 23 28 28 37 42 53
CFM 228 303 379 455 531 607 683 759 910
12x10 .83
NC - - 20 24 29 33 38 43 54
4500
24x06 CFM 276 367 459 551 643 735 827 918 1102
1.00
12x12 NC - - 20 24 29 33 38 43 54
CFM 323 431 539 647 755 863 970 1078 1294
14x12 1.16
NC - - 21 25 30 34 39 44 55
CFM 380 506 633 759 886 1013 1139 1139 1524
14x14 1.36
NC - - 22 26 31 35 40 40 48
CFM 638 851 1063 1276 1489 1701 1914 2127 2552
18x18 2.25
NC - 20 24 28 33 37 42 47 58
24x12 CFM 563 751 938 1126 1314 1501 1689 1877 2252
2.00
18x16 NC - 19 23 27 32 36 41 46 57
CFM 857 1142 1428 1714 1999 2285 2570 2856 3427
24x18 3.00
NC - 21 25 29 34 38 43 48 59
48x12 CFM 1151 1534 1918 2301 2685 3068 3452 3835 4602
4.00
24x24 NC 20 23 27 31 36 40 45 50 61
CFM 1198 1598 1997 2397 2797 3196 3595 3995 4794
30x20 4.17
NC 20 23 27 27 31 36 45 50 61
36x20 CFM 1444 1926 2407 2889 3370 3851 4333 4814 5777
5.00
30x24 NC 21 24 28 32 37 41 46 51 62
CFM 1738 2317 2897 3476 4055 4635 5214 5793 6952
36x22 5.50
NC 21 24 28 32 37 41 46 51 62
48x18 CFM 2205 2940 3674 4409 5144 5879 6614 7349 8819
6.00
36x24 NC 22 25 29 33 38 42 47 52 63
48x24 CFM 2326 3101 3876 4651 5426 6201 6977 7752 9302
8.00
36x32 NC 23 26 30 34 39 43 48 53 64
CONTINUED
Nk Vel 300 400 500 600 700 800 900 1000 1200
Size Duct Area ft
Ps -.012 -.022 -.034 -.049 -.067 -.087 -.110 -.136 -.196
HEAVY DUTY GRILLES
48x30 CFM 2919 3892 4865 5839 6812 7785 8758 9731 11677
10.00
42x34
NC 24 27 31 35 40 44 49 54 65
CFM 3513 4684 5855 7026 8197 9368 10539 11710 14052
48x36 12.00
NC 24 27 31 35 40 44 49 54 65
CFM 3909 5212 6515 7818 9121 10424 11727 13030 15635
48x40 13.33
NC 25 28 32 36 41 45 50 55 66
CFM 4701 6267 7834 9401 10968 12535 14102 15668 18802
48x48 16.00
NC 26 29 33 37 42 46 51 56 67
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Nk Vel Neck Velocity of air stream in Feet per Minute
Ps Negative Static pressure (inches of water column)
NC Noise criterion, Sound pressure level. NC ratings are based on sound power level (Lw)
RE: 10-12 watts minus a 10dB room attenuation in all octave bands.
GR178 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
DOOR/TRANSFER GRILLES
DOOR/TRANSFER GRILLES
DG
METALAIRE offers a complete line of aluminum door grilles in a variety of mounting styles to
suit every application.
DGSF Single flange Finished appearance on only one side of the door or wall
DGDF Double flange Finished appearance on both sides of the door or wall
MODEL DG
The DG series of door grilles is available in four models to satisfy a
variety of applications. The model DGCO is designed for applications
DOOR/TRANSFER GRILLES
Sight proof
Surface mount
DG
GR180 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES DG SPECIFICATIONS
DOOR GRILLE INVERTED V LOUVERS Performance Specification
EXTRUDED ALUMINUM The manufacturer shall provide published performance
MODELS DGCO/DGSF/DGDF/DGLP data. Data shall be tested in accordance to ANSI/
Air inlets shall be models DGCO/DGSF/DGDF/DGLP ASHRAE Standard 70-2006.
DOOR/TRANSFER GRILLES
DG
minimal light transmission.
Units shall include screw holes for surface mounting.
Louvers shall be on 2/3" center set at 70 and overlapped
to provide a vision proof effect. Deflector blades shall be
fixed. Units shall be designed to integrate into a wall or
door application.
NC 21 25 29 32 35 38 40 43 45
CFM 233 350 467 583 700 817 933 1050 1167
14 x 12
NC 21 26 29 33 36 38 41 43 46
CFM 272 408 544 681 817 953 1089 1225 1361
14 x 14
NC 22 26 30 33 36 39 42 44 46
CFM 267 400 533 667 800 933 1067 1200 1333
16 x 12
NC 22 26 30 33 36 39 42 44 46
CFM 356 533 711 889 1067 1244 1422 1600 1778
16 x 16
NC 23 28 31 35 38 40 43 45 48
CFM 300 450 600 750 900 1050 1200 1350 1500
18 x 12
NC 23 27 31 34 37 40 42 45 47
CFM 450 675 900 1125 1350 1575 1800 2025 2250
18 x 18
NC 24 29 32 36 39 41 44 46 49
CFM 333 500 667 833 1000 1167 1333 1500 1667
20 x 12
NC 23 27 31 34 37 40 43 45 47
CFM 556 833 1111 1389 1667 1944 2222 2500 2778
20 x 20
NC 25 30 33 36 39 42 45 47 50
CFM 400 600 800 1000 1200 1400 1600 1800 2000
24 x 12
NC 24 28 32 35 38 41 43 46 48
CFM 600 900 1200 1500 1800 2100 2400 2700 3000
24 x 18
NC 26 30 34 37 40 43 45 48 50
CFM 800 1200 1600 2000 2400 2800 3200 3600 4000
24 x 24
NC 27 31 35 38 41 44 46 49 51
CFM 500 750 1000 1250 1500 1750 2000 2250 2500
30 x 12
NC 25 29 33 36 39 42 44 47 49
CFM 833 1250 1667 2083 2500 2917 3333 3750 4167
30 x 20
NC 27 31 35 38 41 44 47 49 51
CFM 1000 1500 2000 2500 3000 3500 4000 4500 5000
30 x 24
NC 28 32 36 39 42 45 47 50 52
CFM 1250 1875 2500 3125 3750 4375 5000 5625 6250
30 x 30
NC 29 33 37 40 43 46 48 51 53
Throw N/A N/A N/A N/A N/A N/A N/A N/A N/A
GR182 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
PERFORMANCE NOTES FOR SERIES DG
All data is tested in accordance with ANSI/ASHRAE 70-2006.
DEFINITION OF UNITS
Ps Static pressure = PtPv (inches of water column)
NC Noise criterion, sound pressure level NC ratings are based on sound power
DOOR/TRANSFER GRILLES
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
Throw Non-isothermal horizontal throw (supply air temperature 15F colder than average
room temperature); values are for 150, 100 and 50fpm velocities
Velocity fpm (Feet per Minute)
CFM Cubic Feet per Minute (Air)
DG
METALAIRE Revers-A-Core grilles and registers are designed for a clean architectural
appearance without sacrificing air pattern flexibility.
RC41C Single deflection Radius curved border Removable and reversible core
RC42C Double deflection Radius curved border Removable and reversible core PAGE 184
GR184 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
MODEL RC
The RC series reversible core grilles and registers combine rugged
aluminum construction, a clean architectural design, and extremely
Model: 41C-1 ( Single Deflection Grille ) Model: 42C-1 ( Double Deflection Grille )
( Curved Border ) ( Curved Border )
Duct Size = Listed Size Adjustable
Duct Size = Listed Size Rear Blades
Listed Size - 14
RC
Mounting Hole
Mounting
Listed Size - 41
Gasket Hole
5 3 Gasket
216 5
1 1 1
116 4 4
15 1 15 1
141 4 141 4
Model: 41F-1 ( Single Deflection Grille ) Model: 42F-1 ( Double Deflection Grille )
( Flat Border ) ( Flat Border )
Adjustable
Duct Size = Listed Size Duct Size = Listed Size
Mounting Hole Rear Blades
Listed Size - 41 Listed Size - 14
Gasket Mounting
5 Hole
1 1 3 Gasket
116 4
216 5
1
4
15 1
141 4
1
15
114 4
Listed Size = 281 Listed Size = 281
Model: RC41C-1 ( Single Deflection Grille ) Model: RC42C-1 ( Double Deflection Grille )
( Curved Border ) ( Curved Border )
( Removable Inner Frame ) ( Removable Inner Frame )
Duct size = Listed Size + 21
15 1
138 15 1
138
4 4
RC
Frame
3
Mullion Support Blades Mullion Support Blades 4
5" Centers Maximum 5" Centers Maximum 5
Listed Width - 58 8
Listed Width +281
Listed Width + 2 38
Model: 41C OBD ( Single Deflection Register - Curved Border) Model: 42C OBD ( Double Deflection Register - Curved Border )
( With Opposed Blade Damper) ( With Opposed Blade Damper )
Duct Size = Listed Size
Options:
Duct Size = Listed Size Options: Listed Size - 81
Listed Size - 81 Opposed Blade Damper
Opposed Blade Damper
Adjustable
Mounting Hole Rear Blades
REVERSIBLE CORE GRILLES
15 1 15 1
141 4 141 4
Listed Size = 2 81
Listed Size = 2 81
Model: 41F OBD ( Single Deflection Register - Flat Border ) Model: 42F OBD ( Double Deflection Register - Flat Border )
( With Opposed Blade Damper ) ( With Opposed Blade Damper )
Duct Size = Listed Size Options:
Duct Size = Listed Size Options:
Listed Size - 81 Opposed Blade Damper
Listed Size - 81 Opposed Blade Damper
Model: RC41C OBD ( Single Deflection Register - Curved Border ) Model: RC42C OBD ( Double Deflection Register - Curved Border )
( Removable Inner Frame ) ( Removable Inner Frame )
( With Opposed Blade Damper ) ( With Opposed Blade Damper )
Duct Size = Listed Size + 21
Duct Size = Listed Size + 21 Options:
Options: Listed Size - 81
Listed Size - 81 Opposed Blade Damper
Opposed Blade Damper
Rear Blade
Mounting Hole Mounting Hole
RC Frame
RC Frame
321
212
3 3 238
8 121 8 121
15 1
138 15 1
138
4 4
GR186 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES RC SPECIFICATIONS
REVERSIBLE CORE GRILLE Performance Specification
FIXED LOUVERED CORE The manufacturer shall provide published performance
EXTRUDED ALUMINUM data. Data shall be tested in accordance to ANSI/
ASHRAE Standard 70-2006.
RC
a 5/8" inner border that includes fixed louver fins that
can be set to 5 or 15, upward or downward air pattern.
The removable core shall be held in place with spring
clips. The inner core assembly shall have fins on 1/4"
centers and include mullion support bars on 5" maximum
spacing. Units shall be designed for surface mounting
applications and be designed to be fastened inside the
duct opening with hidden screws.
Available Options
NSH No Screw Holes
GR188 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
RC MODEL NUMBER SPECIFICAION
REMOVABLE CORE GRILLES AND REGISTERS EXTRUDED ALUMINUM
REVERS-A-CORE T-BAR LAY-IN
Model Neck
12 x 12
8 X X
10 X
4 X X X X X X X X
6 X X X X X X X X
24 x 12
8 X X X X X X X X
10 X
4 X X X X X X X X
6 X X X X X X X X
8 X X X X X X X X
10 X X X X X X X X
RC
12 X X X X X X X X
24 x 24
14 X X X X X X X X
16 X X X X X X X X
18 X X X X X X X X
20 X X X X X X X X
22 X
4 X X X X X X X X X X
6 X X X X X X X X X X
8 X X X X X X X X X X
10 X X X X X X X X X X
12 X X X X X X X X X X 48 x 24
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
48 x 24
14 X X X X X X X X X X
16 X X X X X X X X X X
18 X X X X X X X X X X
20 X X X X X X X X X X
22 X
GR190 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES RC PERFORMANCE DATA
MODELS 41C, 42C, 41F, 42F, RC41C, RC42C
RC
Throw 2-5-14 5-10-21 9-14-25 11-17-28 14-21-31 16-24-33 18-25-36 23-28-40
Ac ft CFM 105 158 210 263 315 368 420 525
10x08
0.56 NC - - - - 16 21 25 31
14x06
Throw 2-5-14 5-11-22 9-14-27 12-18-30 14-22-33 17-25-35 19-27-38 24-30-42
10x10 Ac ft CFM 132 298 264 330 396 462 528 660
12x08 0.66 NC - - - 11 17 22 26 32
16x06 Throw 3-6-16 6-12-24 10-16-30 14-20-33 16-24-37 19-28-40 22-30-42 27-33-47
Ac ft CFM 148 222 296 370 444 518 592 740
14x08
0.77 NC - - - 12 18 22 26 33
18x06
Throw 3-6-17 6-13-26 11-17-32 14-22-35 17-26-39 20-30-42 23-32-45 29-35-50
Ac ft CFM 159 239 318 398 477 557 636 796
12x10
0.83 NC - - - 12 18 22 26 33
20x06
Throw 3-6-18 6-13-27 11-18-33 15-22-37 18-27-40 21-31-43 24-33-46 30-37-52
Ac ft CFM 170 254 339 424 509 594 678 848
16x08
0.89 NC - - - 13 18 23 27 34
22x06
Throw 3-7-18 7-14-28 12-18-31 15-23-38 18-28-41 21-32-45 25-34-48 31-38-54
Ac ft CFM 186 279 372 465 559 652 745 931
14x10
28x05
Throw 3-7-19 7-14-29 12-19-35 16-24-40 19-29-43 23-33-47 26-35-50 32-40-56
12x12 Ac ft CFM 192 288 384 480 576 671 767 959
24x06 1.00 NC - - - 13 19 23 27 34
18x08 Throw 3-7-20 7-15-29 13-20-36 16-24-40 20-29-44 23-34-48 26-36-51 33-40-57
CONTINUED
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Nk Vel Neck Velocity is the airstream velocity in the duct just before it reaches the supply outlet;
measured in feet per minute
Pt Total pressures in inches of water
Throw Throw distance in feet are for terminal velocities of 150 fpm, 100 fpm and 50 fpm respectively
NC Noise Criteria based on a room absorption of 10 dB, re: 10-12 watts [ NC les than 10 (-)]
Ac Actual Core Free Area in square feet
GR192 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES RC PERFORMANCE DATA
MODELS 41C, 42C, 41F, 42F, RC41C, RC42C
RC
24x18
3.00 NC - - - - - - 12 19
36x12
Throw 1-3-12 3-7-26 5-12-34 9-19-43 12-26-51 17-30-59 22-34-63 29-43-70
22x22 Ac ft CFM 328 492 657 821 985 1149 1314 1642
24x20 3.36 NC - - - - - - 12 19
48x10 Throw 1-3-13 3-7-27 6-13-36 9-20-45 13-27-54 18-32-62 23-36-67 30-45-74
24x24 Ac ft CFM 392 588 784 980 1176 1371 1567 1959
36x16 4.00 NC - - - - - - 13 20
48x12 Throw 2-4-14 4-8-30 6-14-40 10-22-49 14-30-59 19-35-68 25-40-73 33-49-81
Ac ft CFM 492 735 981 1226 1472 1717 1962 2453
30x24
5.00 NC - - - - - - 14 21
36x20
Throw 2-4-16 4-9-33 7-16-44 11-25-55 16-33-76 22-39-76 28-44-81 37-55-91
Ac ft CFM 590 885 1180 1475 1770 2064 2359 2949
36x24
6.00 NC - - - - - 11 15 22
48x18
Throw 2-4-18 4-10-36 8-17-49 12-27-61 17-36-73 24-43-84 31-49-89 40-61-100
Ac ft CFM 688 1032 1375 1720 2064 2408 2752 3440
42x24 7.00 NC - - - - - 12 16 23
Throw 2-5-19 5-11-39 8-19-52 13-29-66 19-39-79 26-46-90 34-52-96 44-66-108
Ac ft CFM 790 1184 1578 1971 2365 2759 3153 3546
48x24 8.00 NC - - - - - 12 17 23
Throw 2-5-20 5-11-42 9-20-56 14-32-70 20-42-84 28-49-97 36-56-103 47-70-115
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
REVERSIBLE CORE GRILLES
Nk Vel Neck Velocity is the airstream velocity in the duct just before it reaches the supply outlet;
measured in feet per minute
Pt Total pressures in inches of water
Throw Throw distance in feet are for terminal velocities of 150 fpm, 100 fpm and 50 fpm respectively
NC Noise Criteria based on a room absorption of 10 dB, re: 10-12 watts [ NC les than 10 (-)]
Ac Actual Core Free Area in square feet
RC
GR194 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
INDUSTRIAL GRILLES
MODEL 4100 MODEL 4200
INDUSTRIAL GRILLES
MODEL 4300 MODEL RL
METALAIRE offers a complete line of industrial grilles for applications that require specialized
performance or construction characteristics.
GR196 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
MODEL 4100
The 4100 series is designed for high capacity air distribution in an
industrial environment. The series is designed for ceiling and high
sidewall installation. The 4100 is available in single (4152) and
Project:
double (4154) deflection and is heavy duty aluminum construction.
INDUSTRIAL GRILLES
Project: Tag:
Tag: 4 3/8" deep frame with 1 1/2" blades on 1 1/2" center
Engineer:
Available in vertical (V4152/V4154) or horizontal (H4152/H4154) blade orientation
Engineer: Contractor: Submittal: 4152
Contractor: Date:
1 1/2" frame border with face screw holes
Submittal: 4152
Date: Sidewall Industrial
Optional inverted frameSupply Grilles / Registers - Single Deflection
(4152-IF/4154-IF)
Aluminum
Sidewall Industrial - 4
Optional Supply
3/8" Frame
Grilles
trunk latch frame
Depth - 1 1/2
/ Registers
(4152-TLF/4154-TLF)
BladeDeflection
- Single Spacing
Aluminum -4 3/8" Frame Depth - 1Deflection
1/2 BladeGrilleSpacing
Models: modular frameSingle
V4152
Optional (4152-MF/4154-MF) - Vertical Blades
Models: V4152 H4152 Single Deflection Grille
Single Deflection Grille - Vertical Blades- Horizontal Blades
Optional air foil blades
H4152 V4152Single Deflection Grille - Horizontal- Blades
IF Single Deflection Grille Vertical Blades - Inverted Frame
Optional gang
H4152 operator
IF (GOV/GOH)
Single Deflection Grille - Horizontal Blades - Inverted Frame
V4152 IF Single Deflection Grille - Vertical Blades - Inverted Frame
H4152 IF Single Deflection Grille - Horizontal Blades - Inverted Frame
Model: H4152 / V4152 (Single Deflection Grille - Horizontal / Vertical Blades)
Model: H4152 / V4152 (Single Deflection Grille - Horizontal / Vertical Blades)
Air Flow Deflection
4100/4200/4300
Face View (All models)
Air FlowListed
Deflection 1
Size - 4
Face View (All models)
Single Deflection
1
Listed Size - 4 (Horizontal Blades)
Single Deflection
1 1 43 (Horizontal Blades)
12 12 8
1 Duct 1
12 43
12 8
Duct
Adjustable Air Pattern Deflectors
Listed Size - 3
Adjustable Air Pattern Deflectors
8
Duct Opening = Listed Size
Listed Size - 38 1
Listed Size + 2 2
Duct Opening = Listed Size
1 Single Deflection
Listed Size + 2 2 (Vertical Blades)
Model: H4152-IF / V4152-IF (Single Deflection Grille - Inverted Frame - Horizontal / Vertical Blades) Single Deflection
(Vertical Blades)
Model: H4152-IF / V4152-IF (Single Deflection Grille - Inverted Frame - Horizontal / Vertical Blades)
Duct Air Flow Deflection
43
8
43
8
Adjustable Air Pattern Deflectors
11 Listed Size - 38
Adjustable Air Pattern Deflectors 11
2 2
1 1 ListedDuct 3
SizeOpening
-8 = Listed Size 1 1
2 1 2
Duct Opening = Listed Size Listed Size + 2 2
Listed Size + 2 21
Option: H4154 / V4152 (Double Deflection Register With Opposed Blade Damper - Horizontal / Vertical Blades)
Air Flow
Option: H4154 / V4152 (Double Deflection Register With Opposed Blade Damper Deflection / Vertical Blades)
- Horizontal
Listed Size - 1
Air Flow Deflection
8
Options:
OBD or OBDA
Listed Size - 81 Options: Opposed Blade Damper
1 21
OBD or OBDA
1 21 Opposed Blade Damper
43
8
Duct 43
8
Duct
Adjustable Air Pattern Deflectors
1
12 Listed Size - 3
Adjustable Air Pattern Deflectors 1
12
8
1
12 Listed Size 3
Duct-Opening = Listed Size 1
12
8 1
Listed Size + 2 2
Duct Opening = Listed Size
1
Listed Size + 2 2
Duct Duct
Double Deflection
Double Deflection
(Vertical Front Blades)
(Vertical Front Blades)
o Model: H4154 IF (Double
o Model: H4154 IFDeflection Grille - Inverted
(Double Deflection Grille -Frame - Horizontal
Inverted Front Blades)
Frame - Horizontal Front Blades)
I I II II II II I I
Adjustable Front and Rear
Adjustable Front and Rear 1 1
1 1
Air Pattern Deflectors
Air Pattern Deflectors 2 2
-j -j
4100/4200/4300
GR198 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
METALAIRE
METALAIRE
REGISTERS
GRILLES &
Duct Dimension W
H (Duct
Listed Size) Model 1 Model 2 Model 3 Model 4
8 8 19 30 41
10 10 23 36 49
INDUSTRIAL GRILLES
12 12 27 42 57
15 15 33 51 69
4100/4200/4300
MODEL 4200
The 4200 series is designed for high capacity air distribution in
an industrial environment. The shallow collar permits deflectors
to project past the frame for a greater deflection angle. The
4200 is available in single (4252) and double (4254) deflection
INDUSTRIAL GRILLES
Contractor: 1 3/16" frame border with face screw holes Submittal: 4252
Date: Optional inverted frame (4252-IF/4254-IF)
Sidewall Industrial Supply Grilles - Shallow Frame
Optional trunk latch frame (4252-TLF/4254-TLF)
Extruded Aluminum - 1 1/2 Blade Spacing
Optional modular frame (4252-MF/4254-MF)
Models: V4252 Single Deflection Grille - Vertical Blades
Optional air foil blades
H4252 Single Deflection Grille - Horizontal Blades
OptionalSingle
V4252-IF gang operator (GOV/GOH)
Deflection Grille - Vertical Blades - Inverted Frame
H4252-IF Single Deflection Grille - Horizontal Blades - Inverted Frame
Model: H4252 / V4252 (Single Deflection Grille)
Face View (All models)
4100/4200/4300
Listed Size - 3
8
Air Flow Direction
3
Duct 4 17
8
3 17
8
4
3
1 16 1
Listed Size - 2 3
1 16
Listed Size + 2
Nominal Size - 3
4 (Demper)
OBDA Damper
121
438
17 Face View ( V4252D )
8
Listed Size + 2
GR201
2016 Metal Industries, Inc.
REGISTERS
GRILLES &
MODEL 4300
The 4300 series of industrial grilles is designed for high capacity
air distribution in an industrial environment. The wider blade
spacing offers superior control of large volumes of air with
minimum pressure drop. The 4300 is available in single (4352)
INDUSTRIAL GRILLES
o Model: H4352 / V4352 (Single Deflection Grille - Horizontal I Vertical Blades) Face View (All models)
Single Deflection (Horizontal Blades)
/
4100/4200/4300
0 0
/ 0
/
/
/
0 0
Duct
/
/
0
GR202 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES 4100/4200/4300 SPECIFICATIONS
MULTI-CORE SUPPLY GRILLES Performance Specification
ALUMINUM MODELS The manufacturer shall provide published performance
4152/4154/4252/4254/4352/4354 data. Data shall be tested in accordance to ANSI/
Air outlets shall be models V4152/V4154/V4252/V4254/ ASHRAE Standard 70-2006.
V4352/V4354 with vertical front blades or H4152/H4154/
INDUSTRIAL GRILLES
H4252/H4254/H4352/H4354 with horizontal front blades Paint Specification
manufactured by METALAIRE. Units shall be single Process shall be anodic electro-deposition using an
deflection (4152/4252/4352), with a single set of blades, anodic acrylic paint. Units shall undergo pre-treatment
or double deflection (4154/4254/4354), with a single including a pressurized spray stage using an alkaline
set of front and rear blades. Units shall be of extruded cleaner and a de-ionized water rinse.
aluminum construction.
The units shall be the size and quantity as outlined in the
plans and specifications. The border shall be 1 1/2" wide
with individually adjustable, aerodynamically shaped
deflector blades. Units shall be designed for surface
mounting applications and be provided with screw holes
on the face of the device. The blades shall pivot in friction
mounting retainers. Retainers shall hold the deflector
4100/4200/4300
blade position throughout the specified operating range of
the device. Metal friction wires are not acceptable.
4100 series outlets shall have 4 3/8" deep frame with
1 1/2" blades on 1 1/2" center.
4200 series outlets shall have 1 7/8" shallow frame with
1 1/2" blades on 1 1/2" center.
4300 series outlets shall have 7" deep frame with
3" blades on 3" center.
Optional opposed blade damper shall be constructed
of steel (Model OBD) or aluminum (Model OBDA)
Note: Damper is not available on the 4300 series
Damper must be operable from the face of the unit.
28 X X X X X X X X X X X
30 X X X X X X X X X X X
32 X X X X X X X X X X X
34 X X X X X X X X X X X
36 X X X X X X X X X X X
38 X X X X X X X X X X X
40 X X X X X X X X X X X
42 X X X X X X X X X X X
44 X X X X X X X X X X X
46 X X X X X X X X X X X
48 X X X X X X X X X X X
GR204 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
4100 MODEL NUMBER SPECIFICATION
4100 INDUSTRIAL GRILLE
Model Neck
V4152 Vertical Single Defleciton 28 30 32 34 36 38 40 42 44 46 48
H4152 Horizontal Single Deflection 4 X X X X X X X X X X X
INDUSTRIAL GRILLES
V4154 Vertical Double Deflection 5 X X X X X X X X X X X
H4154 Horizontal Double Deflection 6 X X X X X X X X X X X
V4152 IF Vertical Single Deflection Inverted Frame 8 X X X X X X X X X X X
H4152 IF Horizontal Single Deflection Inverted Frame 10 X X X X X X X X X X X
V4154 IF Vertical Double Deflection Inverted Frame 12 X X X X X X X X X X X
H4154 IF Horizontal Double Deflection Inverted Frame 14 X X X X X X X X X X X
16 X X X X X X X X X X X
18 X X X X X X X X X X X
20 X X X X X X X X X X X
22 X X X X X X X X X X X
24 X X X X X X X X X X X
26 X X X X X X X X X X X
4100/4200/4300
28 X X X X X X X X X X X
30 X X X X X X X X X X X
32 X X X X X X X X X X X
34 X X X X X X X X X X X
36 X X X X X X X X X X X
38 X X X X X X X X X X X
40 X X X X X X X X X X X
42 X X X X X X X X X X X
44 X X X X X X X X X X X
46 X X X X X X X X X X X
48 X X X X X X X X X X X
Model Neck
V4152-TLF Single Def. Vert. Blades Trunk Latch Frame 28 30 32 34 36 38 40 42 44 46 48
H4152-TLF Single Def. Hor. Blades Trunk Latch Frame 6 X X X X X X X X X X X
V4154-TLF Dble Def. Vert. Blades Trunk Latch Frame 8 X X X X X X X X X X X
H4154-TLF Dble Def. Hor. Blades Trunk Latch Frame 10 X X X X X X X X X X X
12 X X X X X X X X X X X
14 X X X X X X X X X X X
16 X X X X X X X X X X X
18 X X X X X X X X X X X
20 X X X X X X X X X X X
22 X X X X X X X X X X X
24 X X X X X X X X X X X
26 X X X X X X X X X X X
GR206 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
4100 MODEL NUMBER SPECIFICATION
4100 INDUSTRIAL GRILLE
Model Neck
V4152-TLF Single Def. Vert. Blades Trunk Latch Frame 28 30 32 34 36 38 40 42 44 46 48
H4152-TLF Single Def. Hor. Blades Trunk Latch Frame 28 X X X X X X X X X X X
INDUSTRIAL GRILLES
V4154-TLF Dble Def. Vert. Blades Trunk Latch Frame 30 X X X X X X X X X X
H4154-TLF Dble Def. Hor. Blades Trunk Latch Frame 32 X X X X X X X X X
34 X X X X X X X X
36 X X X X X X X
38 X X X X X X
40 X X X X X
42 X X X X
44 X X X
46 X X
48 X
4100/4200/4300
Standard OBD Steel Opposed Blade Damper
02 Satin Silver OBDA Aluminum Opposed Blade Damper
Optional GOV Gang Operator Vertical
01 White GOH Gang Operator Horizontal
03 Black AF Air Foil Blades
04 Clear Anodize
24 Mill
28 Custom Color TR Deep
Available Accessories
GOV Gang Operator Vertical
GOH Gang Operator Horizontal
AF Air Foil Blades
4100/4200/4300
GR208 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
4200 MODEL NUMBER SPECIFICATION
4200 INDUSTRIAL GRILLE
Model Neck
V4252 Vertical Single Defleciton 6 8 10 12 14 16 18 20 22 24 26
H4252 Horizontal Single Deflection 6 X X X X X X X X X X X
INDUSTRIAL GRILLES
V4254 Vertical Double Deflection 8 X X X X X X X X X X X
H4254 Horizontal Double Deflection 10 X X X X X X X X X X X
V4252 IF Vertical Single Deflection Inverted Frame 12 X X X X X X X X X X X
H4252 IF Horizontal Single Deflection Inverted Frame 14 X X X X X X X X X X X
V4254 IF Vertical Double Deflection Inverted Frame 16 X X X X X X X X X X X
H4254 IF Horizontal Double Deflection Inverted Frame 18 X X X X X X X X X X X
20 X X X X X X X X X X X
22 X X X X X X X X X X X
24 X X X X X X X X X X X
26 X X X X X X X X X X X
28 X X X X X X X X X X X
30 X X X X X X X X X X X
4100/4200/4300
32 X X X X X X X X X X X
34 X X X X X X X X X X X
36 X X X X X X X X X X X
38 X X X X X X X X X X X
40 X X X X X X X X X X X
42 X X X X X X X X X X X
44 X X X X X X X X X X X
46 X X X X X X X X X X X
48 X X X X X X X X X X X
46 X X X X X X X X X X X
48 X X X X X X X X X X X
32 X X X X X X X X X X X
34 X X X X X X X X X X X
36 X X X X X X X X X X X
38 X X X X X X X X X X X
40 X X X X X X X X X X X
42 X X X X X X X X X X X
44 X X X X X X X X X X X
46 X X X X X X X X X X X
48 X X X X X X X X X X X
46 X X X X X X X X X X X
48 X X X X X X X X X X X
GR210 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
4200 MODEL NUMBER SPECIFICATION
4200 INDUSTRIAL GRILLE
Model Neck
V4252-TLF Single Def. Vert. Blades Trunk Latch Frame 6 8 10 12 14 16 18 20 22 24 26
H4252-TLF Single Def. Hor. Blades Trunk Latch Frame 6 X X X X X X X X X X X
INDUSTRIAL GRILLES
V4254-TLF Dble Def. Vert. Blades Trunk Latch Frame 8 X X X X X X X X X X
H4254-TLF Dble Def. Hor. Blades Trunk Latch Frame 10 X X X X X X X X X
12 X X X X X X X X
14 X X X X X X X
16 X X X X X X
18 X X X X X
20 X X X X
22 X X X
24 X X
26 X
4100/4200/4300
Model Neck
V4252-TLF Single Def. Vert. Blades Trunk Latch Frame 28 30 32 34 36 38 40 42 44 46 48
H4252-TLF Single Def. Hor. Blades Trunk Latch Frame 6 X X X X X X X X X X X
V4254-TLF Dble Def. Vert. Blades Trunk Latch Frame 8 X X X X X X X X X X X
H4254-TLF Dble Def. Hor. Blades Trunk Latch Frame 10 X X X X X X X X X X X
12 X X X X X X X X X X X
14 X X X X X X X X X X X
16 X X X X X X X X X X X
18 X X X X X X X X X X X
20 X X X X X X X X X X X
22 X X X X X X X X X X X
24 X X X X X X X X X X X
26 X X X X X X X X X X X
Available Accessories
GOV Gang Operator Vertical
GOH Gang Operator Horizontal
AF Air Foil Blades
GR212 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
4300 MODEL NUMBER SPECIFICATION
4300 INDUSTRIAL GRILLE
Model Neck
V4352 Vertical Single Defleciton 6 8 10 12 14 16 18 20 22 24 26
H4352 Horizontal Single Deflection 6 X X X X X X X X X X X
INDUSTRIAL GRILLES
V4354 Vertical Double Deflection 8 X X X X X X X X X X X
H4354 Horizontal Double Deflection 10 X X X X X X X X X X X
V4352-IF Vertical Single Deflection Inverted Frame 12 X X X X X X X X X X X
H4352-IF Horizontal Single Deflection Inverted Frame 14 X X X X X X X X X X X
V4354-IF Vertical Double Deflection Inverted Frame 16 X X X X X X X X X X X
H4354-IF Horizontal Double Deflection Inverted Frame 18 X X X X X X X X X X X
20 X X X X X X X X X X X
22 X X X X X X X X X X X
24 X X X X X X X X X X X
26 X X X X X X X X X X X
28 X X X X X X X X X X X
30 X X X X X X X X X X X
4100/4200/4300
32 X X X X X X X X X X X
34 X X X X X X X X X X X
36 X X X X X X X X X X X
38 X X X X X X X X X X X
40 X X X X X X X X X X X
42 X X X X X X X X X X X
44 X X X X X X X X X X X
46 X X X X X X X X X X X
48 X X X X X X X X X X X
46 X X X X X X X X X X X
48 X X X X X X X X X X X
32 X X X X X X X X X X X
34 X X X X X X X X X X X
36 X X X X X X X X X X X
38 X X X X X X X X X X X
40 X X X X X X X X X X X
42 X X X X X X X X X X X
44 X X X X X X X X X X X
46 X X X X X X X X X X X
48 X X X X X X X X X X X
46 X X X X X X X X X X X
48 X X X X X X X X X X X
GR214 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
4300 MODEL NUMBER SPECIFICATION
4300 INDUSTRIAL GRILLE
Model Neck
V4352-TLF Single Def. Vert. Blades Trunk Latch Frame 6 8 10 12 14 16 18 20 22 24 26
H4352-TLF Single Def. Hor. Blades Trunk Latch Frame 6 X X X X X X X X X X X
INDUSTRIAL GRILLES
V4354-TLF Dble Def. Vert. Blades Trunk Latch Frame 8 X X X X X X X X X X
H4354-TLF Dble Def. Hor. Blades Trunk Latch Frame 10 X X X X X X X X X
12 X X X X X X X X
14 X X X X X X X
16 X X X X X X
18 X X X X X
20 X X X X
22 X X X
24 X X
26 X
4100/4200/4300
Model Neck
V4352-TLF Single Def. Vert. Blades Trunk Latch Frame 28 30 32 34 36 38 40 42 44 46 48
H4352-TLF Single Def. Hor. Blades Trunk Latch Frame 6 X X X X X X X X X X X
V4354-TLF Dble Def. Vert. Blades Trunk Latch Frame 8 X X X X X X X X X X X
H4354-TLF Dble Def. Hor. Blades Trunk Latch Frame 10 X X X X X X X X X X X
12 X X X X X X X X X X X
14 X X X X X X X X X X X
16 X X X X X X X X X X X
18 X X X X X X X X X X X
20 X X X X X X X X X X X
22 X X X X X X X X X X X
24 X X X X X X X X X X X
26 X X X X X X X X X X X
Available Accessories
GOV Gang Operator Vertical
GOH Gang Operator Horizontal
AF Air Foil Blades
GR216 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES 4100/4200/4300 PERFORMANCE DATA
MODELS 4100, 4200, 4300
INDUSTRIAL GRILLES
45 .021 .038 .059 .084 .115 .150 .190 .235
Ac ft CFM 57 76 95 114 133 152 171 190
0.19 NC - - - - - 12 15 18
06x06 0 4 - 8 - 17 7 - 12 - 21 10 - 15 - 24 12 - 17 - 26 14 - 20 - 28 15 - 21 - 30 17 - 23 - 32 19 - 24 - 34
Throw 22.5 3 - 7 - 15 5 - 10 - 19 8 - 13 - 22 10 - 15 - 24 12 - 18 - 26 13 - 19 - 27 15 - 20 - 29 17 - 22 - 31
45 2 - 5 - 13 4 - 9 - 17 7 - 11 - 20 9 - 13 - 21 10 - 15 - 23 12 - 17 - 25 13 - 19 - 26 14 - 20 - 28
Ac ft CFM 110 146 183 219 256 292 329 365
08x08 0.37 NC - - - - 11 15 18 21
10x06 0 5 - 12 - 24 9 - 16 - 30 14 - 20 - 33 16 - 24 - 36 19 - 28 - 39 22 - 30 - 42 24 - 31 - 44 27 - 33 - 47
12x05 Throw 22.5 4 - 10 - 21 8 - 14 - 27 12 - 17 - 30 14 - 21 - 33 16 - 24 - 35 19 - 27 - 38 21 - 28 - 40 23 - 30 - 42
45 3 - 8 - 18 6 - 12 - 24 9 - 15 - 27 12 - 18 - 30 14 - 21 - 32 16 - 24 - 34 18 - 26 - 36 20 - 27 - 38
4100/4200/4300
Ac ft CFM 123 164 205 246 287 328 369 410
0.41 NC - - - - 11 15 18 22
12x06 0 6 - 13 - 26 10 - 17 - 31 14 - 21 - 35 17 - 26 - 38 20 - 29 - 41 23 - 31 - 44 26 - 33 - 47 29 - 35 - 50
Throw 22.5 5 - 10 - 22 8 - 15 - 28 12 - 18 - 32 15 - 22 - 35 17 - 26 - 38 20 - 28 - 40 22 - 30 - 43 25 - 32 - 45
45 4 - 8 - 19 6 - 13 - 25 10 - 16 - 29 13 - 19 - 31 15 - 22 - 34 17 - 25 - 36 19 - 27 - 38 21 - 29 - 41
Ac ft CFM 140 186 233 279 326 372 419 465
0.47 NC - - - - 12 16 19 22
10x08
14x6 0 6 - 14 - 27 11 - 18 - 33 15 - 23 - 37 18 - 27 - 41 21 - 31 - 44 24 - 33 - 47 27 - 35 - 50 30 - 37 - 53
Throw 22.5 5 - 11 - 24 9 - 16 - 30 13 - 20 - 34 16 - 24 - 37 18 - 28 - 40 21 - 30 - 43 24 - 32 - 45 26 - 34 - 48
45 4 - 9 - 20 7 - 14 - 27 11 - 17 - 31 14 - 20 - 34 16 - 24 - 36 18 - 27 - 39 20 - 29 - 41 23 - 31 - 43
Ac ft CFM 178 238 297 356 416 475 535 594
10x10 0.59 NC - - - - 13 17 20 23
12x08 0 7 - 15 - 31 12 - 21 - 38 17 - 26 - 42 21 - 31 - 46 24 - 35 - 50 27 - 38 - 53 31 - 40 - 57 34 - 42 - 60
16x06 Throw 22.5 5 - 12 - 27 10 - 18 - 34 15 - 22 - 38 18 - 27 - 42 21 - 31 - 45 24 - 34 - 48 27 - 36 - 51 30 - 38 - 54
45 4 - 10 - 23 8 - 15 - 31 12 - 19 - 35 15 - 23 - 38 18 - 27 - 41 20 - 31 - 44 23 - 33 - 46 26 - 35 - 49
Ac ft CFM 200 266 333 399 466 532 599 665
14x08 0.67 NC - - - - 13 17 21 24
18x06 0 7 - 16 - 33 13 - 22 - 40 18 - 27 - 45 22 - 33 - 49 25 - 37 - 53 29 - 40 - 57 33 - 42 - 60 36 - 45 - 63
Throw 22.5 6 - 13 - 28 10 - 19 - 36 16 - 24 - 40 19 - 28 - 44 22 - 33 - 48 25 - 36 - 51 28 - 38 - 54 31 - 40 - 57
45 5 - 10 - 24 8 - 16 - 32 13 - 20 - 37 16 - 24 - 40 19 - 28 - 43 22 - 32 - 46 24 - 35 - 49 27 - 37 - 52
Ac ft CFM 218 290 363 435 508 580 653 725
12x10 0.73 NC - - - - 13 17 21 24
20x06 0 7 - 17 - 34 13 - 23 - 42 19 - 28 - 47 23 - 34 - 51 27 - 39 - 55 30 - 42 - 59 34 - 44 - 62 38 - 47 - 66
Throw 22.5 6 - 14 - 29 11 - 20 - 38 16 - 25 - 42 20 - 29 - 46 23 - 34 - 50 26 - 38 - 53 29 - 40 - 56 33 - 42 - 60
45 5 - 11 - 25 8 - 17 - 34 13 - 21 - 38 17 - 25 - 42 20 - 30 - 45 23 - 34 - 48 25 - 36 - 51 28 - 38 - 54
CONTINUED
2016 Metal Industries, Inc. GR217
REGISTERS
GRILLES &
45 5 - 12 - 27 9 - 18 - 37 14 - 23 - 41 18 - 27 - 45 21 - 32 - 49 24 - 37 - 52 27 - 39 - 55 31 - 41 - 58
Ac ft CFM 260 346 433 519 606 692 779 865
12x12 0.87 NC - - - - 14 18 21 24
24x06
0 8 - 19 - 38 14 - 25 - 46 21 - 31 - 51 25 - 37 - 56 29 - 43 - 60 33 - 46 - 64 37 - 48 - 68 41 - 51 - 72
18x08
36x04 Throw 22.5 7 - 15 - 32 12 - 22 - 41 18 - 27 - 46 21 - 32 - 51 25 - 37 - 55 28 - 41 - 58 32 - 44 - 62 36 - 46 - 65
45 5 - 12 - 28 9 - 19 - 37 14 - 23 - 42 18 - 28 - 46 21 - 32 - 49 25 - 37 - 53 28 - 40 - 56 31 - 42 - 59
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Pt Total pressure (inches of water column)
Throw Throw distance in feet are for terminal velocities of 150 fpm, 100 fpm and 50 fpm respectively
NC Noise Criteria based on a room absorption of 10 dB, re: 10-12 watts [ NC les than 10 (-)]
Ac Actual Core Free Area in square feet
GR218 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES 4100/4200/4300 PERFORMANCE DATA
MODELS 4100, 4200, 4300
INDUSTRIAL GRILLES
45 .021 .038 .059 .084 .115 .150 .190 .235
Ac ft CFM 294 392 490 587 685 783 881 979
0.98 NC - - - - 15 19 22 25
16x10
20x08 0 9-20-40 15 - 26 - 48 22 - 33 - 54 26 - 40 - 59 31 - 45 - 64 35 - 48 - 68 40 - 51 - 73 44 - 54 - 77
Throw 22.5 7 - 16 - 34 12 - 23 - 44 19 - 29 - 49 23 - 34 - 54 27 - 40 - 58 30 - 44 - 62 34 - 46 - 66 38 - 49 - 69
45 6 - 12 - 30 10 - 20 - 39 15 - 25 - 44 20 - 30 - 49 23 - 34 - 52 26 - 39 - 56 30 - 42 - 59 33 - 44 - 63
Ac ft CFM 332 442 553 663 774 884 995 1105
1.11 NC - - - 11 15 19 23 26
18x10
0 9 - 21 - 42 16 - 28 - 51 23 - 35 - 58 28 - 42 - 63 33 - 48 - 68 38 - 52 - 73 42 - 55 - 77 47 - 58 - 81
22x08
Throw 22.5 7 - 17 - 36 13 - 24 - 47 20 - 30 - 52 24 - 36 - 57 28 - 42 - 62 32 - 47 - 66 36 - 49 - 70 40 - 52 - 74
45 6 - 13 - 31 10 - 21 - 42 16 - 26 - 47 21 - 31 - 52 24 - 37 - 56 28 - 42 - 60 31 - 45 - 63 35 - 47 - 67
4100/4200/4300
Ac ft CFM 358 477 596 715 834 954 1073 1192
1.19 NC - - - 11 15 19 23 26
16x12
0 10 - 22 - 44 17 - 29 - 53 24 - 37 - 60 29 - 44 - 65 34 - 50 - 71 39 - 53 - 76 44 - 57 - 80 49 - 60 - 84
24x08
Throw 22.5 8 - 17 - 38 14 - 25 - 48 21 - 31 - 54 25 - 38 - 59 29 - 44 - 64 34 - 48 - 68 38 - 51 - 73 42 - 54 - 76
45 6 - 14 - 33 11 - 22 - 43 17 - 27 - 49 22 - 33 - 54 25 - 38 - 58 29 - 43 - 62 33 - 46 - 66 36 - 49 - 69
Ac ft CFM 366 488 610 732 854 975 1097 1219
1.14 NC - - - 11 16 20 23 26
14x14
0 10 - 22 - 44 17 - 30 - 54 25 - 37 - 60 30 - 44 - 66 34 - 51 - 71 39 - 54 - 76 44 - 57 - 81 49 - 60 - 85
20x10
Throw 22.5 8 - 18 - 38 14 - 25 - 49 21 - 32 - 55 25 - 38 - 60 30 - 45 - 65 34 - 49 - 69 38 - 52 - 73 42 - 55 - 77
45 6 - 14 - 33 11 - 22 - 44 17 - 27 - 49 22 - 33 - 54 26 - 38 - 59 29 - 44 - 63 33 - 47 - 66 37 - 49 - 70
Ac ft CFM 404 539 674 809 944 1078 1213 1348
1.25 NC - - - 11 16 20 23 27
18x12
0 10 - 23 - 47 18 - 31 - 57 26 - 39 - 64 31 - 47 - 70 36 - 53 - 75 41 - 57 - 80 47 - 60 - 85 52 - 64 - 90
22x10
Throw 22.5 8 - 18 - 40 15 - 27 - 51 22 - 33 - 57 27 - 40 - 63 31 - 47 - 68 36 - 51 - 73 40 - 55 - 77 45 - 58 - 81
45 6 - 15 - 35 12 - 23 - 46 18 - 29 - 52 23 - 35 - 57 27 - 40 - 62 31 - 46 - 66 35 - 49 - 70 38 - 52 - 74
Ac ft CFM 423 564 705 846 987 1128 1269 1410
15x15 1.28 NC - - - 12 16 20 24 27
16x14 0 10 - 23 - 48 18 - 32 - 58 26 - 40 - 65 32 - 48 - 71 37 - 54 - 77 42 - 58 - 82 48 - 62 - 87 53 - 65 - 92
28x08 Throw 22.5 8 - 19 - 41 15 - 27 - 53 23 - 34 - 59 27 - 41 - 64 32 - 48 - 70 37 - 53 - 74 41 - 56 - 79 46 - 59 - 83
45 7 - 15 - 35 12 - 24 - 47 18 - 30 - 53 24 - 35 - 58 28 - 41 - 63 31 - 47 - 67 35 - 50 - 71 39 - 53 - 75
Ac ft CFM 451 602 752 903 1053 1204 1354 1505
20x12 1.37 NC - - - 12 16 20 24 27
24x10 0 11 - 24 - 49 19 - 33 - 60 27 - 41 - 67 33 - 49 - 74 38 - 56 - 79 44 - 60 - 85 49 - 64 - 90 55 - 67 - 95
36x04 Throw 22.5 9 - 20 - 42 15 - 28 - 54 24 - 35 - 61 28 - 42 - 67 33 - 50 - 72 38 - 54 - 77 42 - 58 - 81 47 - 61 - 86
45 7 - 15 - 37 12 - 24 - 49 19 - 30 - 55 24 - 37 - 60 28 - 43 - 65 33 - 49 - 70 37 - 52 - 74 41 - 55 - 78
CONTINUED
2016 Metal Industries, Inc. GR219
REGISTERS
GRILLES &
45 7 - 16 - 38 13 - 26 - 51 20 - 32 - 58 26 - 38 - 63 30 - 45 - 68 34 - 51 - 73 38 - 55 - 77 43 - 58 - 82
Ac ft CFM 532 709 886 1063 1241 1418 1595 1772
20x14 1.64 NC - - - 13 17 21 25 28
24x12 0 12 - 26 - 53 21 - 36 - 65 30 - 45 - 73 36 - 53 - 80 42 - 61 - 86 47 - 65 - 92 53 - 69 - 98 59-73-103
28x10 Throw 22.5 9 - 21 - 46 17 - 31 - 59 26 - 38 - 66 31 - 46 - 72 36 - 54 - 78 41 - 59 - 83 46 - 63 - 88 51 - 66 - 93
36x08 45 7 - 17 - 40 13 - 26 - 53 21 - 33 - 60 26 - 40 - 65 31 - 46 - 71 35 - 53 - 75 40 - 57 - 80 44 - 60 - 84
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Pt Total pressure (inches of water column)
Throw Throw distance in feet are for terminal velocities of 150 fpm, 100 fpm and 50 fpm respectively
NC Noise Criteria based on a room absorption of 10 dB, re: 10-12 watts [ NC les than 10 (-)]
Ac Actual Core Free Area in square feet
GR220 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES 4100/4200/4300 PERFORMANCE DATA
MODELS 4100, 4200, 4300
INDUSTRIAL GRILLES
45 .021 .038 .059 .084 .115 .150 .190 .235
Ac ft CFM 564 752 940 1128 1316 1503 1691 1879
1.71 NC - - - 13 17 21 25 28
30x10 0 12-27-55 21-37-67 31-46-75 37-55-82 43-63-89 49-67-95 55-71-101 61-75-106
Throw 22.5 10-22-47 17-32-61 26-40-68 32-47-74 37-55-80 42-61-86 47-64-91 53-68-96
45 8-17-41 14-27-55 21-34-61 27-41-67 32-48-73 36-55-78 41-58-82 45-61-87
Ac ft CFM 620 827 1033 1240 1447 1653 1860 2066
1.82 NC - - - 13 18 22 25 28
18x18
0 13-28-58 22-38-70 32-48-79 38-58-86 45-66-93 51-70-99 58-75-106 64-79-111
20x16
Throw 22.5 10-23-50 18-33-64 28-41-71 33-50-78 39-58-84 44-64-90 50-68-96 55-71-101
45 8-18-43 14-29-57 22-36-64 29-43-71 33-50-76 38-57-81 43-61-86 48-64-91
4100/4200/4300
Ac ft CFM 642 856 1070 1284 1498 1712 1926 2140
24x14 1.91 NC - - - 13 18 22 25 29
28x12 0 13-29-59 23-39-72 33-49-80 39-59-88 46-67-95 52-72-101 59-76-107 65-80-113
34x10 Throw 22.5 10-23-51 18-34-65 28-42-72 34-51-79 39-59-86 45-65-92 51-69-97 56-72-102
45 8-18-44 15-29-58 23-36-66 29-44-72 34-51-78 39-58-83 44-62-88 48-66-93
Ac ft CFM 773 1030 1287 1544 1802 2059 2316 2573
2.27 NC - - - 14 19 23 26 29
20x20
0 14-32-64 25-43-79 36-54-88 43-64-96 50-73-104 57-79-111 64-83-118 72-88-124
28x14
Throw 22.5 11-26-56 20-37-71 31-46-79 37-56-87 43-65-94 49-71-100 55-75-107 62-79-112
45 9-20-48 16-32-64 25-40-72 32-48-79 37-56-85 43-64- 91 48-68-96 53-72-102
Ac ft CFM 851 1135 1420 1704 1989 2273 2557 2842
22x20 2.46 NC - - - 14 19 23 27 30
24x14 0 15-33-68 26-45-82 38-56-92 45-68-101 53-77-109 60-82-117 68-88-124 75-92-130
26x12 Throw 22.5 12-27-58 21-39-75 32-49-83 39-58-91 45-68-99 52-75-106 58-79-112 65-83-118
45 9-21-50 17-33-67 26-42-76 34-50-83 39-59-89 45-67-96 50-72-101 56-76-107
Ac ft CFM 940 1254 1568 1881 2195 2509 2823 3136
22x22 2.75 NC - - - 15 19 23 27 30
24x20 0 15-35-71 28-47-87 39-59-97 47-71-106 55-81-115 63-87-123 71-92-130 79-97-137
30x16 Throw 22.5 13-28-61 22-41-78 34-51-88 41-61-96 48-71-104 54-78-111 61-83-118 68-88-124
45 10-22-53 18-35-70 28-44-79 35-53-87 41-62-94 47-70-100 53-75-106 59-79-112
Ac ft CFM 1126 1502 1877 2253 2628 3004 3379 3755
24x24 3.28 NC - - - 16 20 24 28 31
32x18
0 17-38-78 30-52-95 43-65-106 52-78-116 60-89-125 69-95-134 78-101-142 86-106-150
36x16
48x12 Throw 22.5 14-31-67 24-45-86 37-56-96 45-67-105 52-78-114 60-86-121 67-91-129 74-96-136
45 11-24-58 19-39-77 30-48-87 39-58-95 45-67-103 51-77-110 58-82-116 64-87-123
CONTINUED
2016 Metal Industries, Inc. GR221
REGISTERS
GRILLES &
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Pt Total pressure (inches of water column)
Throw Throw distance in feet are for terminal velocities of 150 fpm, 100 fpm and 50 fpm respectively
NC Noise Criteria based on a room absorption of 10 dB, re: 10-12 watts [ NC les than 10 (-)]
Ac Actual Core Free Area in square feet
GR222 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES 4100/4200/4300 PERFORMANCE DATA
MODELS 4100, 4200, 4300
INDUSTRIAL GRILLES
45 .021 .038 .059 .084 .115 .150 .190 .235
Ac ft CFM 1785 2379 2973 3567 4162 4756 5350 5944
5.12 NC - - 12 18 22 26 30 33
30x30 0 21-48-98 38-65-119 54-82-133 65-98-146 76-112-158 87-119-169 98-127-179 109-133-189
32x28
Throw 22.5 17-39-84 31-56-108 47-70-121 56-84-132 66-98-143 75-108-153 84-115-162 94-121-171
45 14-31-73 24-49-97 38-61-109 49-73-120 57-85-129 65-97-138 73-104-147 81-109-155
Ac ft CFM 2034 2712 3390 4068 4746 5424 6102 6780
5.83 NC - - 13 18 23 27 30 33
32x32 0 23-51-104 41-70-127 58-87-142 70-104-156 81-119-169 93-127-180 104-135-191 116-142-202
Throw 22.5 18-41-90 33-60-115 50-75-129 60-90-141 70-105-153 80-115-163 90-122-173 100-129-182
45 15-33-78 26-52-104 41-65-117 52-78-128 60-91-138 69-104-148 78-111-157 86-117-165
4100/4200/4300
Ac ft CFM 2300 3068 3837 4605 5373 6141 6910 7678
6.57 NC - - 13 19 23 27 31 34
34x34
0 24-54-111 43-74-136 62-93-152 74-111-166 86-127-179 99-136-192 111-144-203 124-152-214
48x24
Throw 22.5 20-44-96 35-64-123 53-80-137 64-96-150 75-112-162 85-123-174 96-130-184 107-137-194
45 15-35-83 28-55-110 43-69-124 55-83-136 64-96-147 73-110-157 83-118-167 92-124-176
Ac ft CFM 2590 3453 4315 5178 6040 6903 7765 8628
7.38 NC - - 14 19 24 28 31 34
36x36 0 26-58-118 46-79-144 65-98-161 79-118-176 92-134-190 105-144-203 118-152-216 131-161-227
Throw 22.5 21-47-102 37-68-130 56-85-145 68-102-159 79-119-172 90-130-184 102-138-195 113-145-206
45 16-37-88 29-58-117 46-73-132 58-88-144 68-102-156 78-117-167 88-125-177 97-132-186
Ac ft CFM 3210 4280 5350 6420 7490 8560 9630 10700
9.11 NC - - 15 20 25 29 32 35
40x40 0 29-65-131 51-88-160 73-109-179 88-131-196 102-150-212 117-160-226 131-170-240 146-179-253
Throw 22.5 23-52-113 41-75-145 63-94-162 75-113-177 88-132-192 101-145-205 113-154-217 126-162-.229
45 18-41-98 33-65-130 51-81-147 65-98-161 76-114-173 87-130-185 98-139-197 108-147-207
Ac ft CFM 3550 4731 5913 7094 8275 9456 10638 11819
10.05 NC - - 15 20 25 29 33 36
42x42 0 30-68-138 54-92-168 77-115-188 92-138-206 107-157-223 123-168-238 138-178-252 153-188-266
Throw 22.5 24-55-119 43-79-152 66-99-170 79-119-187 93-139-201 106-152-215 119-162-228 132-170-241
45 19-43-103 34-68-137 54-86-154 68-103-169 80-120-182 91-137-195 103-146-207 114-154-218
Ac ft CFM 4270 5691 7113 8534 9955 11376 12798 14219
12.05 NC - - 16 21 26 30 33 36
46x46 0 33-74-151 59-101-185 84-126-206 101-151-226 118-173-244 135-185-261 151-196-277 168-206-292
48x44
Throw 22.5 27-60-131 48-87-167 73-109-187 87-130-205 101-152-221 116-167-236 130-177-251 145-187-264
45 21-48-113 38-75-150 59-94-169 75-113-185 88-131-200 100-150-214 112-160-227 125-169-239
CONTINUED
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
4100/4200/4300
GR224 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
MODEL RL
The RL series is designed to provide jet or diffused
air patterns in ceiling, sidewall and exposed duct
applications such as sports arenas and gymnasiums.
In sidewall and exposed duct installations, the RL can
INDUSTRIAL GRILLES
be mounted vertically or horizontally. The RL is ideal for vertical spot cooling or heating when
mounted in the ceiling or on the bottom of exposed ductwork. They are capable of supplying
straight flow primary air jet streams at 0 deflection for long throws, and a diffused pattern
of primary air at 15 and 30 deflections for short throws with greater spread. The cylindrical
drum enables primary air to be directed horizontally or vertically within a 60 arc. Because of
its extreme flexibility the adjustable louvers provide accurate directional control of primary air.
Available in sizes minimum 9" x 6" and maximum 70" x 15"
RL
GR226 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES RL SPECIFICATIONS
HIGH CAPACITY SUPPLY EXTRUDED Performance Specification
ALUMINUM MODELS RL/RL-DF/RL-GO The manufacturer shall provide published performance
Air outlets shall be models RL/RL-DF/RL-GO manufactured data. Data shall be tested in accordance to ANSI/
by METALAIRE. Units shall be vertical deflection blades ASHRAE Standard 70-2006.
mounted in a cylindrical drum and of extruded aluminum
INDUSTRIAL GRILLES
construction. The cylindrical drum shall rotate on non- Paint Specification
metallic bushings and allow the discharge jet to be Process shall be anodic electro-deposition using an
directed vertically within a 60 arc. Rotating drum shall anodic acrylic paint. Units shall undergo pre-treatment
be sealed with felt gasketing. Deflector blades shall be including a pressurized spray stage using an alkaline
individually adjustable allowing the discharge jet to be cleaner and a de-ionized water rinse.
adjusted horizontally 60. The units shall be the size and
quantity as outlined in the plans and specifications.
Model RL-DF shall have split deflector blades along the
center of the horizontal plane. Top and bottom deflector
blades shall be individually adjustable.
Model RL-GO shall include a gang operator to permit
uniform adjustment of all deflector blades. Gang operator
RL
shall be accessible from the face of the outlet.
Optional opposed blade damper shall be constructed of
aluminum (Model DA).
Damper must be operable from the face of the register.
NC - - 13 19 25 30 34 38
CFM 325 434 542 650 759 867 975 1084
Pt .038 .068 .106 .152 .207 .271 .341 .422
12x06
Throws 9-24 11-30 15-36 17-39 21-42 23-45 24-47 27-50
NC - - 13 19 25 30 34 38
NC - - 15 21 17 31 36 39
NC - - 14 20 25 30 35 38
NC - - 14 20 25 30 34 38
CFM 450 600 750 900 1050 1200 1350 1500
Pt .026 .047 .073 .105 .143 .186 .236 .291
36x06
Throws 26-50 33-58 36-64 40-71 44-76 47-82 51-87 52-90
NC - - 16 22 27 32 36 40
NC - 11 17 24 29 34 38 42
CONTINUED
GR228 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES RL PERFORMANCE DATA
MODEL RL
INDUSTRIAL GRILLES
Pt .022 .039 .061 .088 .120 .157 .199 .244
60x06
Throws 36-62 41-71 46-80 51-88 54-94 58-101 62-107 65-113
NC - 12 19 26 31 36 40 44
Data based on units tested at 0 Blade Defletion. See chart below for other
Blade Deflections.
Deflection NC Throws Pt
15 +4 x .85 x 1.2
30 +8 x .69 x 1.8
RL
PERFORMANCE NOTES FOR SERIES RL
All Data was tested in accordance with ANSI/ASHRAE 70-2006
DEFINITION OF UNITS:
Pt
20x10
Throws 22-46 30-53 34-59 38-64 40-70 44-75 46-78 48-83
NC - - 16 22 27 32 36 40
NC - 14 21 27 32 37 41 45
NC - - 16 23 38 33 37 41
CONTINUED
GR230 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES RL PERFORMANCE DATA
MODEL RL
INDUSTRIAL GRILLES
Pt .018 .032 .050 .073 .098 .128 .163 .201
50x12
Throws 45-77 52-89 57-100 63-108 68-74 74-125 77-134 81-141
NC - 13 20 26 31 36 41 44
CFM 1500 2000 2500 3000 3500 4000 4500 5000
Pt .017 .031 .485 .070 .095 .124 .157 .194
60x12
Throws 50-84 57-98 63-110 69-118 74-130 81-137 84-147 90-154
NC - 14 21 27 32 37 42 45
CFM 1750 2334 2917 3500 4084 4667 5250 5834
Pt .016 .029 .046 .066 .089 .116 .147 .182
70x12
Throws 53-92 62-106 69-118 75-130 81-141 87-150 92-159 96-167
NC - 15 22 28 33 38 42 46
RL
Data based on units tested at 0 Blade Defletion. See chart below for other Blade Deflections.
Deflection NC Throws Pt
15 +4 x .85 x 1.2
30 +8 x .69 x 1.8
DEFINITION OF UNITS:
NC - 12 19 26 30 35 39 43
CFM 1250 1667 2084 2500 2917 3334 3750 4167
NC - - 14 20 25 30 35 38
CFM 1563 2084 2605 3125 3646 4167 4688 5209
NC - 15 23 28 34 39 43 47
CONTINUED
GR232 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES RL PERFORMANCE DATA
MODEL RL
Data based on units tested at 0 Blade Defletion. See chart below for other Blade Deflections.
Deflection NC Throws Pt
INDUSTRIAL GRILLES
15 +4 x .85 x 1.2
30 +8 x .69 x 1.8
DEFINITION OF UNITS:
RL
METALAIRE has a complete line of specialty grilles for applications that require non-standard
air distribution.
SPECIALTY GRILLES
MPK-6 Aluminum T-bar Lay-in Panel PAGE 246
JA
The polymer underfloor diffuser offers the choice of horizontal or vertical air
patterns with its flip over design. The WFO is suitable for fitting into standard
floor tile with optional fittings for concrete slab.
WFO Polymer Raised floor installation
MODEL JA
The JA series of Jet Aire Diffusers offers an economical solution
to high capacity air distribution applications requiring long throw
distances. It can be effectively applied to large space applications such
as civic centers, auditoriums, and arenas. The JA series is available in
SPECIALTY GRILLES
Model X Element Diameter Rings Per Element Dia. D Duct Size Model X Element Diameter Rings Per Element Dia. D Duct Size P Panel Diameter
6 4 3 6 6 4 3 6 8
8 6 3 8 8 6 3 8 10
10 8 3 10 10 8 3 10 12
12 10 3 12 12 10 3 12 14
14 12 3 14 14 12 3 14 16
16 14 4 16 16 14 4 16 18
18 16 4 18 18 16 4 18 20
20 18 4 20 20 18 4 20 22
GR236 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SPECIALTY GRILLES
JA
1 Jet (1 Panel) 2 Jets (1 Panel) 3 Jets (1 Panel) 4 Jets (1 Panel)
Available Element
Sizes Sizes A B Duct A B Duct A B Duct A B Duct
6 4 7 7/8 7 7/8 6x6 14 7/8 7 7/8 12 x 6 19 7/8 7 7/8 18 x 6 25 7/8 7 7/8 24 x 6
8 6 9 7/8 9 7/8 8x8 18 7/8 9 7/8 17 x 8 27 7/8 9 7/8 26 x 8 36 7/8 9 7/8 35 x 8
10 8 11 7/8 11 7/8 10 x 10 23 7/8 11 7/8 22 x 10 35 7/8 11 7/8 34 x 10 47 7/8 11 7/8 46 x 10
12 10 13 7/8 13 7/8 12 x 12 26 7/8 13 7/8 25 x 12 39 7/8 13 7/8 38 x 12 52 7/8 13 7/8 51 x 12
14 12 15 7/8 15 7/8 14 x 14 30 7/8 15 7/8 29 x 14 45 7/8 15 7/8 44 x 14 60 7/8 15 7/8 59 x 14
16 14 17 7/8 17 7/8 16 x 16 34 7/8 17 7/8 33 x 16 51 7/8 17 7/8 50 x 16 68 7/8 17 7/8 67 x 16
18 16 19 7/8 19 7/8 18 x 18 39 7/8 19 7/8 38 x 18 59 7/8 19 7/8 58 x 18 79 7/8 19 7/8 78 x 18
20 18 21 7/8 21 7/8 20 x 20 45 7/8 21 7/8 44 x 20 66 7/8 21 7/8 64 x 20 89 7/8 21 7/8 88 x 20
Model X Element Diameter Rings Per Element Dia. D Duct Size Model X Element Diameter Rings Per Element Dia. D Duct Size P Panel Diameter
6 4 3 6 6 4 3 6 8
8 6 3 8 8 6 3 8 10
10 8 3 10 10 8 3 10 12
12 10 3 12 12 10 3 12 14
14 12 3 14 14 12 3 14 16
16 14 4 16 16 14 4 16 18
18 16 4 18 18 16 4 18 20
20 18 4 20 20 18 4 20 22
Inches measured to the nearest 1/16 inch
GR238 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SPECIALTY GRILLES
1 Jet (1 Panel) 2 Jets (1 Panel) 3 Jets (1 Panel) 4 Jets (1 Panel)
JA
Available Element
Sizes Sizes A B Duct A B Duct A B Duct A B Duct
6 4 7 7/8 7 7/8 6x6 14 7/8 7 7/8 12 x 6 19 7/8 7 7/8 18 x 6 25 7/8 7 7/8 24 x 6
8 6 9 7/8 9 7/8 8x8 18 7/8 9 7/8 17 x 8 27 7/8 9 7/8 26 x 8 36 7/8 9 7/8 35 x 8
10 8 11 7/8 11 7/8 10 x 10 23 7/8 11 7/8 22 x 10 35 7/8 11 7/8 34 x 10 47 7/8 11 7/8 46 x 10
12 10 13 7/8 13 7/8 12 x 12 26 7/8 13 7/8 25 x 12 39 7/8 13 7/8 38 x 12 52 7/8 13 7/8 51 x 12
14 12 15 7/8 15 7/8 14 x 14 30 7/8 15 7/8 29 x 14 45 7/8 15 7/8 44 x 14 60 7/8 15 7/8 59 x 14
16 14 17 7/8 17 7/8 16 x 16 34 7/8 17 7/8 33 x 16 51 7/8 17 7/8 50 x 16 68 7/8 17 7/8 67 x 16
18 16 19 7/8 19 7/8 18 x 18 39 7/8 19 7/8 38 x 18 59 7/8 19 7/8 58 x 18 79 7/8 19 7/8 78 x 18
20 18 21 7/8 21 7/8 20 x 20 45 7/8 21 7/8 44 x 20 66 7/8 21 7/8 64 x 20 89 7/8 21 7/8 88 x 20
JA-LI
SERIES JA SPECIFICATIONS
JET AIRE HIGH CAPACITY Performance Specification
STEEL/ALUMINUM The manufacturer shall provide published performance
MODELS JA/JA-AL/JA-EX/JA-AL-EX/ data. Data shall be tested in accordance to ANSI/
JA-P/JA-AL-P/JA-LI/JA-AL-LI ASHRAE Standard 70-2006.
Air outlets shall be model JA Jet*Aire by METALAIRE. Units
SPECIALTY GRILLES
Neck
Model 6 8 10 12 14 16 18 20 Available Finishes
JA-LI-6 Steel T-bar Lay-in Panel X X X X X X Standard
JA-AL-LI-6 Aluminum T-bar Lay-in Panel 01 White
Optional
02 Satin Silver
03 Black
28 Custom Color
GR240 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES JA PERFORMANCE
MODELS JA, JA-1P, JA-2P, JA-3P, JA-4P
Model Nozzle Velocity (fpm) 573 860 1147 1433 1720 2007 2294
SPECIALTY GRILLES
JA-LI-06 JA-LI-AL-06
NC <20 <20 <20 25 30 35 39
CFM 100 150 200 250 300 350 400
Throws 6-11-19 9-16-23 11-19-27 14-21-30 16-23-33 18-25-36 19-27-38
JA-2P-06 JA-AL-2P-06
PT 0.036 0.081 0.144 0.225 0.324 0.441 0.576
NC
<20 <20 21 28 33 38 42
CFM 150 225 300 375 450 525 600
Throws 7-14-23 11-20-29 14-23-33 18-26-37 20-29-40 22-31-44 23-33-47
JA-3P-06 JA-AL-3P-06
PT 0.036 0.081 0.144 0.225 0.324 0.441 0.576
NC <20 <20 23 30 35 40 44
CFM 200 300 400 500 600 700 800
JA
Throws 8-16-27 12-23-33 16-27-38 20-30-43 23-33-47 25-36-50 27-38-54
JA-4P-06 JA-AL-4P-06
PT 0.036 0.081 0.144 0.225 0.324 0.441 0.576
NC <20 <20 24 31 36 41 45
Model Nozzle Velocity (fpm) 714 917 1121 1352 1529 1733 1937
CFM 140 180 220 260 300 340 380
JA-1EX-08 JA-1EX-08
Throws 8-15-23 10-18-26 12-20-28 14-22-31 16-23-33 18-25-35 19-26-37
JA-08 JA-AL-08
JA-1P-08 JA-AL-1P-08 PT 0.056 0.092 0.138 0.192 0.256 0.329 0.411
JA-LI-08 JA-LI-AL-08
NC <20 <20 21 26 30 34 38
CFM 280 360 440 520 600 680 760
Throws 11-21-32 14-26-36 17-28-40 20-31-43 23-33-47 25-35-50 26-37-53
JA-2P-08 JA-AL-2P-08 PT 0.056 0.092 0.138 0.192 0.256 0.329 0.411
NC
<20 <20 24 29 33 37 41
CFM 420 540 660 780 900 1020 1140
Throws 13-26-39 17-31-44 21-35-49 24-38-53 28-40-57 30-43-61 32-45-64
JA-3P-08 JA-AL-3P-08
PT 0.056 0.092 0.138 0.192 0.256 0.329 0.411
NC <20 20 26 31 35 39 42
CFM 560 720 880 1040 1200 1360 1520
Throws 15-30-45 19-36-51 24-40-57 28-43-61 32-47-66 35-50-70 37-53-74
JA-4P-08 JA-AL-4P-08
PT 0.056 0.092 0.138 0.192 0.256 0.329 0.411
NC <20 21 27 32 36 40 44
CONTINUED
SERIES JA PERFORMANCE
MODELS JA, JA-1P, JA-2P, JA-3P, JA-4P
Model Nozzle Velocity (fpm) 573 717 860 1003 1147 1290 1433
Model Nozzle Velocity (fpm) 550 734 917 1101 1284 1468 1651
CONTINUED
GR242 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES JA PERFORMANCE
MODELS JA, JA-1P, JA-2P, JA-3P, JA-4P
Model Nozzle Velocity (fpm) 573 765 956 1147 1338 1529 1720
SPECIALTY GRILLES
0.036 0.064 0.100 0.144 0.196 0.256 0.324
JA-LI-14 JA-LI-AL-14
NC <20 <20 22 28 32 39 40
CFM 900 1200 1500 1800 2100 2400 2700
Throws 17-34-57 23-46-66 29-52-74 34-57-81 40-62-87 46-66-93 49-70-99
JA-2P-14 JA-AL-2P-14
PT 0.036 0.064 0.100 0.144 0.196 0.256 0.324
NC
<20 <20 21 28 33 38 42
CFM 1350 1800 2250 2700 3150 3600 4050
Throws 21-42-70 28-56-81 35-64-90 42-70-99 49-76-107 56-81-114 61-86-121
JA-3P-14 JA-AL-3P-14
PT 0.036 0.064 0.100 0.144 0.196 0.256 0.324
NC <20 <21 27 32 37 41 45
CFM 1800 2400 3000 3600 4200 4800 5400
JA
Throws 24-49-81 32-65-93 40-74-104 49-81-114 57-87-123 65-93-132 70-99-140
JA-4P-14 JA-AL-4P-14
PT 0.036 0.064 0.100 0.144 0.196 0.256 0.324
NC <20 <22 28 34 38 42 46
Model Nozzle Velocity (fpm) 562 749 936 1123 1311 1498 1685
CFM 600 800 1000 1200 1400 1600 1800
JA-1EX-16 JA-1EX-16
Throws 14-28-47 18-37-54 23-43-60 28-47-66 32-50-71 37-54-76 40-57-81
JA-16 JA-AL-16
JA-1P-16 JA-AL-1P-16 PT 0.035 0.061 0.096 0.138 0.188 0.246 0.311
JA-LI-16 JA-LI-AL-16 NC <20 <20 23 28 33 37 41
CONTINUED
SERIES JA PERFORMANCE
MODELS JA, JA-1P, JA-2P, JA-3P, JA-4P
Model Nozzle Velocity (fpm) 538 717 896 1075 1245 1433 1613
PERFORMANCE NOTES
CFMFOR SERIES
3000 JA 3900 4800 5700 6600 7500 8400
CONTINUED
GR244 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES JA PERFORMANCE
MODELS JA, JA-1P, JA-2P, JA-3P, JA-4P
Model Nozzle Velocity (fpm) 458 596 733 871 1008 1146 1283
JA-1EX-22 JA-AL-1EX-22 Throws 16-33-60 21-42-69 26-52-76 31-59-83 36-63-89 41-67-95 46-71-101
JA-22 JA-AL-22 PT 0.025 0.042 0.064 0.090 0.120 0.160 0.200
SPECIALTY GRILLES
NC <20 <20 <20 23 26 28 31
Model Nozzle Velocity (fpm) 454 606 758 909 1061 1212 1364
JA-1EX-24 JA-AL-1EX-24 Throws 17-34-66 23-46-76 29-57-85 34-66-93 40-71-101 46-76-108 51-81-114
JA-24 JA-AL-24 PT 0.025 0.042 0.068 0.096 0.130 0.170 0.220
NC <20 <20 21 25 30 34 39
Model Nozzle Velocity (fpm) 477 636 796 955 1114 1273 1432
CFM 1500 2000 2500 3000 3500 4000 4500
JA-1EX-26 JA-AL-1EX-26 Throws 20-40-74 27-53-85 33-67-95 40-74-104 47-80-113 53-85-120 60-90-128
JA-26 JA-AL-26 PT 0.028 0.046 0.070 0.110 0.140 0.190 0.230
NC >20 >20 22 27 32 37 42
JA
PERFORMANCE NOTES FOR SERIES JA
All Data was tested in accordance with ANSI/ASHRAE 70-2006
DEFINITION OF UNITS:
Tag: Engineer:
Project: Contractor:
Location: Architect:
Date: Submitted By:
Submittal No: MPK-6
Industrial High Capacity Punkah Louver
Aluminum - Global Adjustment
Optional
Aperture Damper
D - 1/8"
Flex Duct
23 3/4" Mounting Ring
C
2 1/2" H
3/8" B
11 7/8"
Optional Damper
Operator
11 7/8"
23 3/4"
MPK
Model A B C D H
MPK-6 06 3 3 3/8 2 1/2 06 5 7/8
MPK-6 08 4 3/8 4 9/16 2 1/2 08 7 1/16
MPK-6 10 5 3/4 5 13/16 2 9/16 10 8 3/8
MPK-6 12 7 3/8 6 5/16 2 11/16 12 9
MPK-6 14 8 5/8 7 7/16 3 13/16 14 11 1/4
MPK-6 16 9 3/4 8 9/16 4 7/16 16 13
MPK-6 18 10 1/2 9 13/16 3 15/16 18 13 3/4
MPK-6 18 12 3/8 11 3/16 4 9/16 20 15 3/4
GR246 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES MPK SPECIFICATIONS
PUNKAH LOUVER GLOBAL ADJUSTMENT
MODEL MPK ALUMINUM
Model MPK discharges a high-velocity jet that can be
directed to condition a specific space or area.
The model MPK is constructed using a felt gasket that allows
SPECIALTY GRILLES
smooth movement of the inner core to direct air flow and
provides a tight seal to prevent air leakage.
An optional aperture damper is available which includes an
adjustment knob and stainless steel linkage and tension
springs for maximum corrosion protection.
MPK
Size A B C D E F H No. of Mfg. Holes
06 3 3 5/8 1 1/8 6 7 8 4 3/4 4
08 4 3/8 4 5/8 1 3/4 8 9 10 6 1/8 4
10 5 3/4 6 1/4 2 1/2 10 11 12 8 3/4 6
12 7 3/8 6 1/2 3 12 13 14 9 1/2 6
14 8 5/8 7 3/8 4 1/8 14 15 16 11 1/2 6
16 9 3/4 8 1/2 4 5/8 16 17 18 13 1/8 6
18 10 1/2 10 4 5/8 18 19 20 14 5/8 8
20 12 3/8 11 5 20 21 22 16 8
adjustable without the use of tools allowing the discharge Paint Specification
jet to be directed a full 70 degrees. Outlet shall be Process shall be anodic electro-deposition using an
constructed using a felt gasket seal providing smooth anodic acrylic paint. Units shall undergo pre-treatment
adjustment without leakage. Outer circular frame of unit including a pressurized spray stage using an alkaline
shall include a closed cell neoprene gasket to prevent cleaner and a de-ionized water rinse.
leakage between the outlet and mounting surface.
The units shall be the size and quantity as outlined in the
plans and specifications.
Optional aperture damper shall have an adjustment knob
constructed from aluminum. Connecting linkage, tension
springs, and damper hardware shall be constructed from
stainless steel.
MPK
GR248 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES MPK PERFORMANCE DATA
MODEL MPK
Model Nozzle Velocity (fpm) 1000 1500 2000 2500 3000 3500 4000
CFM 22 33 44 55 66 77 88
Projection 3-6-12 4-8-17 6-12-23 8-16-24 9-18-27 10-21-30 12-22-32
SPECIALTY GRILLES
MPK-04
Total Pressure 0.03 0.07 0.13 0.20 0.28 0.39 0.50
NC <15 <15 <15 19 23 26 30
CFM 49 74 98 123 147 172 196
Projection 4-8-16 6-12-23 8-16-27 10-20-30 12-21-32 14-25-36 16-26-38
MPK-06
Total Pressure 0.05 0.12 0.22 0.34 0.49 0.66 0.86
NC <15 <15 15 21 25 29 33
CFM 104 157 209 261 313 365 418
Projection 6-11-23 8-17-34 11-23-39 14-28-44 17-31-46 20-35-52 23-38-55
MPK-08
Total Pressure 0.06 0.14 0.24 0.38 0.53 0.70 0.92
NC <15 <15 17 24 30 35 38
MPK
CFM 180 270 261 451 541 631 721
Projection 7-15-30 11-22-45 15-30-51 19-37-57 22-41-61 26-47-69 30-50-72
MKP-10
Total Pressure 0.07 0.15 0.25 0.39 0.56 0.74 0.96
NC <15 <15 21 29 35 40 45
CFM 297 445 593 742 890 1038 1187
Projection 10-19-38 14-29-57 19-38-65 24-48-74 29-52-78 33-60-88 38-64-93
MPK-12
Total Pressure 0.07 0.15 0.26 0.40 0.58 0.78 1.01
NC <15 15 24 32 38 44 47
CFM 406 609 811 1014 1217 1420 1623
Projection 11-22-45 17-33-67 22-44-76 28-56-86 33-61-91 39-70-103 45-75-108
MPK-14
Total Pressure 0.07 0.15 0.26 0.41 0.58 0.79 1.02
NC <15 15 25 33 39 44 48
CFM 518 778 1036 1296 1555 1815 2074
Projection 13-25-50 19-38-76 25-50-86 32-63-97 38-69-103 44-79117 50-84-122
MPK-16
Total Pressure 0.07 0.14 0.26 0.41 0.58 0.80 1.03
NC <15 16 26 33 39 44 49
CFM 601 902 1202 1503 1804 2105 2406
Projection 14-27-54 20-41-81 27-54-110 34-68-105 41-74-111 47-85-126 54-91-132
MPK-18
Total Pressure 0.06 0.13 0.24 0.37 0.54 0.74 0.96
NC <15 16 26 33 39 44 49
CFM 835 1253 1670 2088 2506 2924 3341
Projection 16-32-64 24-48-96 32-64-110 40-80-123 48-87-131 56-100-148 64-107-155
MPK-20
Total Pressure 0.06 0.12 0.22 0.34 0.49 0.68 0.88
NC <15 17 27 34 40 46 51
DEFINITION OF UNITS
CFM Airflow / Standard air density and isothermal conditions.
NC Noise Criteria [ NC ] curve which is not exceeded with a Room Attenuation of 10dB and based on
Sound Power Level RE: 10-12 watts
Total Pressure Inches of water gauge required.
Projection Projection distance {Throw} in feet from the Nozzle discharge at which the maximum velocity has
been reduced to specified terminal velocity [ Vt ].
Nozzle Velocity Nozzle Discharge Velocity in feet per minute [ fpm ].
Terminal Velocity Maximum velocity [ Vt ] in feet per minute [ fpm ] at the specified distance from the outlet face
[ Throw ] 400 fpm, 200 fpm and 100 fpm respectively.
MPK
GR250 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
MODEL MRD
The MRD series is a round deflection supply or return grille with
exceptional architectural appeal. It combines the aesthetics of a
circular design with proven performance. The individually adjustable
blades on the supply are designed so they can be adjusted to form a
SPECIALTY GRILLES
column of air or a widespread diffusion pattern. The MRD is suitable
for applications requiring high velocity spot cooling or a dispersed airflow projection.
Adjustable vertical and horizontal blades
METAL*AIRE
Wall or ceiling mount
Tag:
Concealed mounting system
MRD
MRDD
Available
Sizes D F
1
F D- 8 6 6 8 1/4
Models: MRDS & MRDD
1
Available8 8 10 1/4
D F
Sizes
1
6
10 6
10
8-1/4
12 1/4
8 12 8 10-1/4
12 14 1/4
10 10 12-1/4
9
216 12 14 12 14
14-1/4 16 1/4
14 14 16-1/4
16 16 16 16
18-1/4 18 1/4
Number MRD
18 18 18 20-1/4
18 20 1/4
Model: MRDD - Double Deflection Grille 20 20 22-1/4
1 22 20 22 20
24-1/4 22 1/4
4 GASKET
1 24 24 26-1/4
2 22 22 24 1/4
1
1" Back Blade 24 24 26 1/4
Submittal
1
F D- 8
9
216
Available
Model Sizes D F
MRDW-08 8 8 10 1/4
MRDW-10 10 10 12 1/4
MRDW-12 12 12 14 1/4
SPECIALTY GRILLES
MRDW-14 14 14 16 1/4
MRDW-16 16 16 18 1/4
MRDW-18 18 18 20 1/4
MRDW-20 20 20 22 1/4
MRDW-22 22 22 24 1/4
MRDW-24 24 24 26 1/4
MRDW-30 30 30 32 1/4
MRD
Available
Model Sizes D F
MRDW-06 6 6 8 1/4
MRDW-08 8 8 10 1/4
MRDW-10 10 10 12 1/4
MRDW-12 12 12 14 1/4
MRDW-14 14 14 16 1/4
MRDW-16 16 16 18 1/4
MRDW-18 18 18 20 1/4
MRDW-20 20 20 22 1/4
MRDW-22 22 22 24 1/4
MRDW-24 24 24 26 1/4
MRDW-30 30 30 32 1/4
GR252 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES MRD SPECIFICATIONS
ROUND SUPPLY/RETURN ALUMINUM Performance Specification
MODELS MRSD/MRDD/MRDW/MREC The manufacturer shall provide published performance
Air outlets shall be model MRSD/MRDD/MRDW/MREC data. Data shall be tested in accordance to ANSI/
by METALAIRE. Units shall be round single deflection ASHRAE Standard 70-2006.
(MRSD) or double deflection (MRDD/MRDW) supply with
SPECIALTY GRILLES
extruded aluminum blades on 1" spacing. Deflector Paint Specification
blades shall be individually adjustable. The return Process shall be anodic electro-deposition using an
(MREC) shall have a 1/2" x 1/2" aluminum egg crate anodic acrylic paint. Units shall undergo pre-treatment
core of heavy gauge aluminum. Units shall be designed including a pressurized spray stage using an alkaline
for concealed mounting and allow installation for both cleaner and a de-ionized water rinse.
hard and flexible ductwork. Units shall also include a
foam gasket to seal the border and mounting surface.
The units shall be the size and quantity as outlined in
the plans and specifications.
MRD
Model Neck Available Finishes
MRDD Round Double Deflection 6 8 10 12 14 16 18 20 22 24 Standard
MRDW Round Double Deflection- Wide Spacing X X X X X X X X X X 01 White
MRSD Round Single Deflection Optional
MREC Round Egg Crate 02 Satin Silver
03 Black
24 Mill
28 Custom Color
6
NC <15 <15 15 23 29 35 40
Throw 4-8-15 6-12-21 8-14-24 10-16-28 13-21-30 15-22-32 17-24-34
CFM 140 209 279 349 419 489 559
Ps .016 .038 .067 .105 .150 .205 .266
8
NC <15 <15 <15 21 27 33 38
Throw 5-10-20 8-16-27 11-21-32 14-25-36 17-28-39 20-30-41 21-32-45
CFM 218 327 436 545 655 764 873
Ps .014 .033 .059 .092 .131 .180 .234
10
NC <15 <15 <15 20 26 32 36
Throw 6-12-24 9-17-32 14-26-37 17-31-45 21-34-47 25-37-52 29-40-56
CFM 314 471 628 786 943 1100 1257
MRD
CONTINUED
GR254 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES MRD PERFORMANCE DATA
MODEL MREC
fpm 400 600 800 1000 1200 1400 1600
Size Pv .010 .022 .040 .062 .090 .122 .160
CFM 79 118 157 196 236 275 314
6 Ps .040 .091 .162 .255 .363 .500 .652
SPECIALTY GRILLES
NC <15 22 32 39 45 50 54
CFM 140 209 279 349 419 489 559
8 Ps .036 .080 .142 .223 .320 .432 .568
NC <15 22 31 38 44 49 53
CFM 218 327 436 545 655 764 873
10 Ps .033 .073 .130 .203 .293 .397 .522
NC <15 22 31 38 44 48 52
CFM 314 471 628 786 943 1100 1257
12 Ps .031 .070 .123 .194 .278 .384 .495
NC <15 22 32 38 45 49 53
CFM 428 641 855 1069 1283 1497 1711
MRD
14 Ps .030 .067 .119 .186 .267 .365 .475
NC <15 23 32 39 45 50 54
CFM 559 838 1117 1396 1676 1955 2234
16 Ps .029 .065 .116 .181 .260 .354 .465
NC <15 23 33 40 45 50 54
CFM 707 1060 1414 1767 2121 2474 2828
18 Ps .028 .064 .114 .177 .255 .346 .454
NC <15 23 33 40 45 50 54
CFM 873 1309 1746 2182 2618 3055 3491
20 Ps .028 .063 .111 .174 .250 .342 .446
NC <15 25 35 41 47 52 56
CFM 1056 1584 2112 2640 3168 3696 4224
22 Ps .027 .061 .110 .171 .246 .336 .439
NC <15 25 35 41 47 52 56
CFM 1257 1885 2514 3142 3770 4399 5027
24 Ps .027 .061 .108 .170 .244 .331 .435
NC <15 25 35 41 47 52 56
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
fpm Velocity of air stream in Feet per Minute
Ps Static pressure = PtPv (inches of water column)
Throw Non-isothermal horizontal throw (supply air temperature 15F colder than average room temperature);
values are for 50, 100 and 200fpm velocities
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
Pv Velocity pressure (inches of water column)
MODEL WFO
The WFO polymer Underfloor diffuser offers the choic of horizontal
or vertical air patterns with its flip over design. The WFO is
suitable for fitting into standard floor tile with optional fittings for
concrete slab. The disc is reversible for horizontal or vertical air
SPECIALTY GRILLES
Aircell Polymer Floor Diffusers - Pressurized Floor Void Aircell Polymer Floor Diffusers - Pressurized Void
Model WFO - Tile Installation Model WFOS - Slab Floor Installation Supplied with a steel adapter collar
Model WFOV - Low pressure vertical air pattern which is cast into the flor slab. The diffuser can then be
installed into the collar with concealed spring clips.
GR256 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
Vertical Diffusion at 5.4F Cooling Vertical Diffusion at 10.8F Cooling
300 300
250 250
SPECIALTY GRILLES
200 200
Air Velocity (fpm)
ft!
ft!
6
1.
6
1.
ft!
ft!
5
150 150
2.
5
2.
ft!
ft!
3
3
3.
3.
ft!
ft!
9
1
ft!
4.
ft!
4.
7
7
5.
5.
100 100
50 50
0 0
10 20 30 40 50 60 70 80 90 100 20 30 40 50 60 70 80 90 100
WFO
Horizontal Diffusion at Isothermal
to 10.8F Cooling
110
100
90
80
Air Velocity (fpm)
70
ft!
6
4. ft !
1.
3. 5 ft
Tr=Ts (-5.4F)!
1 !
60
2.
ft!
3
ft!
9
4.
50
ft!
7
5.
40 Tr=Ts (-10.8F)!
30
20
10 20 30 40 50 60 70 80 90
Black
Min 500 Pieces
Set Up Charge
GR258 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SECURITY GRILLES
MAXIMUM SECURITY GRILLES MEDIUM SECURITY GRILLES SECURITY ACCESSORIES/OPTIONS
MODEL SGRP MODEL SGRH MODEL SGLFO
SECURITY GRILLES
MINIMUM SECURITY GRILLES BARRIER GRILLES
MODEL SG5500 MODEL SGDB
SGSP
Security Grilles
METALAIRE offers a complete line of security grilles from minimum to maximum security.
METALAIRE security grilles are designed to provide efficient air distribution without jeopardizing
safety or security. Security grilles main application is correctional facilities, however, they are
also an excellent choice for schools, psychiatric hospitals, manufacturing plants or anywhere
that extra security is required.
SGWM Woven wire mesh 12 gauge steel 3/8" woven mesh PAGE 280
SECURITY GRILLES
Barrier Grilles
SGSP
The barrier grille is designed as a barrier for opening between secure and
non-secure areas. These grilles are for duct/wall mounted applications.
SGDB Duct bar welded in sleeve
GR260 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
MODEL SGSP
The SGSP maximum security sidewall/ceiling supply grille is
designed with a perforated face plate of 2" square holes
separated by 1" wide fret bars. A woven steel mesh screen
is inserted directly behind the face plate and is sandwiched
SECURITY GRILLES
by a steel backup plate for additional security.
3/16" steel face plate
SGSP
Face View
3/16" Plate Sleeve
Stitch Welded
1"
= Sleeve Length
Minimum 4"
1/4" Backup Plate Stitch Welded Maximum 16"
Project: Contractor:
Location: Architect:
Date: Submitted By:
Submittal SGSP-SS
Maximum Stainless Steel Security Grille
Model SGSP-SS Stainless Steel Maximum Security Grille Square Holes - Mesh Screen Back
Listed Size + 2"
Listed Size 2"
Face View
10 Gauge Sleeve
Stitch Welded
1"
= Sleeve Length
SECURITY GRILLES
GR262 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES SGSP SPECIFICATIONS
MAXIMUM SECURITY SQUARE HOLES Performance Specification
STEEL MODEL SGSP The manufacturer shall provide published performance
Air outlets shall be model SGSP manufactured by data. Data shall be tested in accordance to ANSI/
METALAIRE. Units shall be maximum security supply ASHRAE Standard 70-2006.
grilles of steel construction. Units shall have a face plate
Paint Specification
SECURITY GRILLES
constructed of 3/16" steel with 2" square holes and
1 fret bars. A 10 gauge woven steel mesh screen shall Process shall be anodic electro-deposition using an
be inserted directly behind the face panel sandwiched by anodic acrylic paint. Units shall undergo pre-treatment
a 1/4" steel backup plate. This assembly shall be backed including a pressurized spray stage using an alkaline
by a stitch welded 3/16" thick steel sleeve. Both face and cleaner and a de-ionized water rinse.
back-up plate shall be stitch welded to the sleeve. Units
shall include a 1" border.
The units shall be the size and quantity as outlined in the
plans and specifications.
Optional opposed blade damper shall be constructed of
steel (Model OBD).
Rear operation of the damper is recommended.
SGSP
9 X X X X X X X X Steel - Optional
12 X X X X X X X 02 Satin Silver
15 X X X X X X 03 Black
18 X X X X X 4 - 16 28 Custom Color
21 X X X X Stainless Steel - Standard
24 X X X 23 Satin Polish
27 X X Stainless Steel - Optional
30 X 01 White Painted
02 Satin Silver Painted
03 Black Painted
28 Custom Color
SGSP
GR264 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES SGSP PERFORMANCE DATA
MODEL SGSP
Size (in) NK Vel 100 150 200 250 300 350 400 450 500 550 600
Neck Area ft Ps .005 .010 .018 .029 .042 .058 .075 .094 .117 .140 .166
SECURITY GRILLES
Throws 2-7 3-10 5-12 6-13 7-15 9-16 10-17 10-18 11-19 12-20 12-21
.250
NC - - - 14 20 24 28 32 35 38 40
08x08 CFM 44 67 89 111 133 155 178 200 222 244 266
Throws 2-10 5-14 7-16 8-18 10-20 12-21 13-23 14-24 15-25 15-27 16-28
.444
NC - - - 17 22 27 31 34 37 40 43
09x09 CFM 56 84 113 141 169 197 225 253 282 310 338
Throws 2-11 5-16 7-18 9-20 11-22 13-24 15-25 16-27 16-28 17-30 18-31
.563
NC - - 11 18 23 28 32 35 38 41 44
12x06 CFM 50 75 100 125 150 175 200 225 250 275 300
Throws 2-11 5-15 7-17 9-19 11-21 12-22 14-24 15-25 15-27 16-28 17-29
SGSP
.500
NC - - - 17 23 27 31 35 38 41 43
12x12 CFM 100 150 200 250 300 350 400 450 500 550 600
Throws 3-15 7-21 10-24 12-27 15-29 17-32 10-24 21-36 22-38 23-40 24-42
1.000
NC - - 13 20 26 30 34 38 41 44 46
15x12 CFM 125 188 250 313 375 438 500 563 625 688 750
Throws 3-17 8-23 11-27 14-30 17-33 20-35 22-38 23-42 24-42 26-45 27-46
1.250
NC - - 14 21 27 31 35 39 42 45 47
15x15 CFM 156 234 313 391 469 547 625 703 782 860 938
Throws 4-19 9-26 12-30 16-34 19-37 22-40 25-42 26-45 27-47 29-50 30-52
1.563
NC - - 15 22 28 32 36 40 43 46 48
18x12 CFM 150 225 300 375 450 525 600 675 750 825 900
Throws 4-18 8-25 12-29 15-33 18-36 21-39 24-42 25-44 27-46 28-49 29-51
1.500
NC - - 15 22 27 32 36 39 43 45 48
18x18 CFM 225 338 450 563 675 788 900 1013 1125 1238 1350
Throws 5-22 10-31 15-36 19-40 22-44 26-48 29-51 31-54 33-57 34-60 36-62
2.250
NC - 11 17 24 29 34 38 41 44 47 50
21x21 CFM 306 459 613 766 919 1072 1225 1378 1532 1685 1838
Throws 5-26 12-36 17-42 22-47 26-51 31-56 34-59 36-63 38-66 40-70 42-73
3.063
NC - 12 18 25 30 35 39 43 46 49 51
24x12 CFM 200 300 400 500 600 700 800 900 1000 1100 1200
Throws 4-21 10-29 14-34 18-36 21-42 25-45 28-48 29-51 31-54 32-56 34-59
2.000
NC - - 16 23 29 33 37 41 44 47 49
CONTINUED
Size (in) NK Vel 100 150 200 250 300 350 400 450 500 550 600
Neck Area ft Ps .005 .010 .018 .029 .042 .058 .075 .094 .117 .140 .166
24x24 CFM 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400
SECURITY GRILLES
Throws 6-30 14-42 20-48 25-54 30-59 35-63 39-68 42-72 44-76 46-80 48-83
4.000
NC - 11 20 26 32 36 40 44 47 50 52
27x27 CFM 506 759 1013 1266 1519 1772 2025 2278 2532 2785 3038
Throws 7-34 15-47 22-54 28-60 34-66 39-71 44-76 47-81 49-85 52-90 54-94
5.063
NC - 12 21 27 33 37 41 45 48 51 53
30x24 CFM 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000
Throws 7-33 15-46 22-54 28-60 33-66 39-71 44-76 46-80 49-85 51-89 54-93
5.000
NC - 12 20 27 33 37 41 45 48 51 53
30x30 CFM 625 938 1250 1563 1875 2188 2500 2813 3125 3438 3750
SGSP
Throws 4-31 10-47 18-60 26-67 31-73 36-79 42-85 47-90 52-95 57-100 60-104
6.250
NC - - 12 19 24 29 33 36 40 42 45
Definition of Units:
CFM Air volume is cubic feet per minute
Nk Vel Neck Velocity is the airstream velocity in the duct just before it reaches the supply
outlet; measured in feet per minute
NC Noise Criteria based on a room absorption of 10 dB, re: 10-12 watts [ NC les than 10 (-)]
Throw Throw distance in feet are for terminal velocities of 150 and 50 fpm respectively
Ps Static pressure is in inches of water
GR266 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
MODEL SGRP
The SGRP maximum security return grille is designed to create
an impenetrable barrier to the ductwork behind the grille. It is
constructed with a steel face welded to a steel sleeve.
3/16" steel perforated face
SECURITY GRILLES
5/16" holes on 7/16" staggered center
Face View
5/16" Holes
On 7/16" Centers
3/16" Plate Steel Sleeve Staggered
= Sleeve Length
SGRP
Face Plate
Face Plate Stitch Welded
Stitch Welded
Stitch Welded Minimum 4"
To Sleeve
To Sleeve Maximum 16"
Location: Architect:
Date: Submitted By:
Submittal SGRP-SS
Maximum Stainless Steel Security Grille
Model SGRP-SS Stainless Steel Maximum Security Grille Perforated Face
Face View
5/16" Holes
On 7/16" Centers
10 Gauge Sleeve Staggered
Face Plate Stitch Welded = Sleeve Length
Stitch Welded Minimum 4"
SECURITY GRILLES
GR268 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES SGRP SPECIFICATIONS
MAXIMUM SECURITY 5/16" HOLES Performance Specification
STEEL MODEL SGRP The manufacturer shall provide published performance
Air outlets shall be model SGRP manufactured by data. Data shall be tested in accordance to ANSI/
METALAIRE. Units shall be maximum security supply ASHRAE Standard 70-2006.
grilles of steel construction. Units shall have a
Paint Specification
SECURITY GRILLES
perforated face plate backed by a stitch welded
3/16" steel sleeve. Face plate shall be constructed Process shall be anodic electro-deposition using an
of 3/16" steel with 5/16" perforations on 7/16" staggered anodic acrylic paint. Units shall undergo pre-treatment
centers and shall be stitch welded to the sleeve. Units including a pressurized spray stage using an alkaline
shall include a 1" border. cleaner and a de-ionized water rinse.
The units shall be the size and quantity as outlined in the
plans and specifications.
Optional opposed blade damper shall be constructed of
steel (Model OBD).
Rear operation of the damper is recommended.
SGRP
8 X X X X X X X X X X X X X X X
9 X X X X X X X X X X X X X X
10 X X X X X X X X X X X X X
12 X X X X X X X X X X X X
14 X X X X X X X X X X X
15 X X X X X X X X X X
16 X X X X X X X X X
4 - 16
18 X X X X X X X X
20 X X X X X X X
21 X X X X X X
22 X X X X X
SGRP
24 X X X X
26 X X X
28 X X
30 X
GR270 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES SGRP PERFORMANCE DATA
MODEL SGRP
Size (in) NK Vel 100 150 200 250 300 350 400 450 500 600 700
Neck Area ft Ps .002 .004 .008 .012 .018 .024 .032 .040 .049 .071 .096
06x06 CFM 25 38 50 63 75 88 100 113 125 150 175
SECURITY GRILLES
Throws 1-5 2-7 3-10 4-12 5-13 6-15 6-16 7-17 8-17 10-19 11-21
.250
NC - - - - 11 15 19 23 26 31 36
08x06 CFM 34 50 67 84 100 117 134 150 167 200 234
Throws 1-5 2-8 4-11 5-14 6-16 6-17 7-18 8-19 9-20 11-22 13-24
.333
NC - - - - 12 16 20 24 27 33 37
08x08 CFM 45 67 89 111 134 156 178 200 222 267 311
Throws 1-6 3-9 4-13 5-16 6-18 7-19 8-21 10-22 11-23 13-25 15-27
.444
NC - - - - 13 18 22 25 26 34 38
09x06 CFM 38 57 75 94 113 132 150 169 188 225 263
Throws 1-6 3-9 4-12 5-15 6-17 7-18 8-19 9-20 10-21 12-23 14-25
.375
SGRP
NC - - - - 12 17 21 25 28 33 38
09x09 CFM 57 85 113 141 169 198 226 254 282 338 395
Throws 1-7 3-11 5-14 6-18 7-20 8-22 10-23 11-25 12-26 14-29 17-31
.563
NC - - - - 14 19 23 26 29 35 39
10x06 CFM 42 63 84 105 126 146 167 188 209 251 292
Throws 1-6 3-9 4-12 5-15 6-17 7-19 8-20 9-21 10-22 12-25 14-27
.417
NC - - - - 13 18 21 25 28 34 38
10x08 CFM 56 84 112 139 167 195 223 251 278 334 390
Throws 1-7 3-11 5-14 6-18 7-20 8-22 9-23 11-25 12-26 14-28 17-31
.556
NC - - - - 14 19 23 26 29 35 39
10x10 CFM 70 105 139 174 209 243 278 313 347 417 486
Throws 1-8 3-12 5-16 7-20 8-22 9-24 11-26 12-27 13-29 16-32 19-34
.694
NC - - - - 15 20 24 27 30 36 40
12x06 CFM 50 75 100 125 150 175 200 225 250 300 350
Throws 1-7 3-10 5-14 6-17 7-19 8-21 9-22 10-21 11-25 14-27 16-29
.500
NC - - - - 14 18 22 26 29 34 39
12x08 CFM 67 101 134 167 201 234 267 301 334 401 467
Throws 1-8 3-12 5-16 7-20 8-22 9-24 10-25 12-27 13-28 16-31 18-34
.667
NC - - - - 15 20 23 27 30 36 40
12x10 CFM 84 125 167 209 250 292 334 375 417 500 584
Throws 2-9 4-13 6-17 7-12 9-25 10-27 12-28 13-30 15-32 17-35 20-38
.833
NC - - - - 16 20 24 28 31 37 41
12x12 CFM 100 150 200 250 300 350 400 450 500 600 700
Throws 2-10 4-14 6-19 8-24 10-27 11-29 13-31 14-33 16-35 19-38 22-41
1.000
NC - - - 11 17 21 25 29 32 37 42
CONTINUED
Size (in) NK Vel 100 150 200 250 300 350 400 450 500 600 700
Neck Area ft Ps .002 .004 .008 .012 .018 .024 .032 .040 .049 .071 .096
14x08 CFM 78 117 156 195 234 273 312 351 389 467 545
SECURITY GRILLES
Throws 2-8 4-13 6-17 7-21 8-24 10-26 11-27 13-29 14-31 17-34 20-36
.778
NC - - - - 16 20 24 28 31 36 41
14x14 CFM 137 205 273 341 409 477 545 613 681 817 953
Throws 2-11 5-17 7-22 9-28 11-31 13-34 15-36 17-39 19-41 22-44 27-49
1.361
NC - - - 12 18 23 27 30 33 39 44
15x15 CFM 157 235 313 391 469 548 626 704 782 938 1095
Throws 2-12 5-18 8-24 10-30 12-34 14-36 16-39 18-41 20-44 24-48 28-51
1.563
NC - - - 13 19 23 27 31 34 39 44
16x10 CFM 112 167 223 278 334 389 445 500 556 667 778
Throws 2-10 4-15 7-20 8-25 10-28 12-31 13-33 15-35 17-37 20-40 23-43
1.111
SGRP
NC - - - 12 17 22 26 29 32 38 42
16x12 CFM 134 200 267 334 400 467 534 600 667 800 934
Throws 2-11 5-17 7-22 9-28 11-31 13-34 15-36 17-38 18-40 22-44 26-48
1.333
NC - - - 12 18 22 26 30 33 39 43
16x16 CFM 178 267 356 445 534 623 712 801 889 1067 1245
Throws 2-13 5-19 8-25 11-32 13-36 15-39 17-41 19-44 21-46 25-51 30-55
1.778
NC - - - 14 19 24 28 31 34 40 44
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Nk Vel Neck Velocity is the airstream velocity in the duct just before it reaches the supply outlet; measured in Feet per Minute
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
Throw Throw distance in feet are for terminal velocities of 50 and 100fpm respectively
Ps Static pressure = PtPv (inches of water column)
GR272 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
MODEL SGRP-SR
The SGRP-SR maximum security grille is designed as a suicide
deterrent. The small holes inhibit threading objects through the face. It
also creates an impenetrable barrier to the ductwork behind the grille.
The SGRP-SR is constructed with a steel face welded to a steel sleeve.
SECURITY GRILLES
10-gauge steel perforated face
Optional
Tag:stainless steel construction Engineer:
Project:continuously welded seams Contractor:
Optional
Location: Architect:
Date: Submitted By:
Submittal SGRP-SR
Steel Maximum Security Grille
Model SGRP-SR Steel Suicide Deterrent Maximum Security Grille Perforated Face
SGRP-SR
Stitch Welded = Sleeve Length Staggered
Face Plate
Stitch Welded Minimum 4"
To Sleeve Maximum 16"
Project: Contractor:
Location: Architect:
Date: Submitted By:
Submittal SGRP-SR-SS
Stainless Steel Maximum Security Grille
Model SGRP-SR-SS Stainless Steel Suicide Deterrent Maximum Security Grille Perforated Face
Face View
3/16" Holes
On 9/32" Centers
Staggered
Face Plate = Sleeve Length
Stitch Welded Minimum 4"
SECURITY GRILLES
GR274 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES SGRP-SR SPECIFICATIONS
MAXIMUM SECURITY 3/16" HOLES Performance Specification
STEEL MODEL SGRP-SR The manufacturer shall provide published performance
Air outlets shall be model SGRP-SR manufactured by data. Data shall be tested in accordance to ANSI/
METALAIRE. Units shall be maximum security supply ASHRAE Standard 70-2006.
grilles of steel construction. Units shall have a perforated
Paint Specification
SECURITY GRILLES
face plate backed by a stitch welded steel sleeve. Face
plate shall be constructed of 10 gauge steel with 3/16" Process shall be anodic electro-deposition using an
perforations on 9/32" staggered centers and shall be anodic acrylic paint. Units shall undergo pre-treatment
stitch welded to the 10 gauge sleeve. Units shall include including a pressurized spray stage using an alkaline
a 1" border. cleaner and a de-ionized water rinse.
The units shall be the size and quantity as outlined in the
plans and specifications.
Optional opposed blade damper shall be constructed of
steel (Model OBD).
Rear operation of the damper is recommended.
SGRP-SR
8 X X X X X X X X X X X X X X X
9 X X X X X X X X X X X X X X
10 X X X X X X X X X X X X X
12 X X X X X X X X X X X X
14 X X X X X X X X X X X
15 X X X X X X X X X X
16 X X X X X X X X X
4 - 16
18 X X X X X X X X
20 X X X X X X X
21 X X X X X X
22 X X X X X
SGRP-SR
24 X X X X
26 X X X
28 X X
30 X
GR276 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES SGRP-SR PERFORMANCE DATA
MODEL SGRP-SR
Size (in) NK Vel 100 150 200 250 300 350 400 450 500 600 700
Neck Area ft Ps .002 .005 .009 .014 .020 .026 .035 .044 .054 .078 .106
06x06 CFM 25 38 50 63 75 88 100 113 125 150 175
SECURITY GRILLES
Throws 1-5 2-7 3-10 4-12 5-13 6-15 6-16 7-17 8-17 10-19 11-21
.250
NC - - - - 14 18 22 26 29 34 39
08x06 CFM 34 50 67 84 100 117 134 150 167 200 234
Throws 1-5 2-8 4-11 5-14 6-16 6-17 7-18 8-19 9-20 11-22 13-24
.333
NC - - - - 15 19 23 27 30 36 40
08x08 CFM 45 67 89 111 134 156 178 200 222 267 311
Throws 1-6 3-9 4-13 5-16 6-18 7-19 8-21 10-22 11-23 13-25 15-27
.444
NC - - - 11 16 21 25 28 31 37 41
09x06 CFM 38 57 75 94 113 132 150 169 188 225 263
Throws 1-6 3-9 4-12 5-15 6-17 7-18 8-19 9-20 10-21 12-23 14-25
SGRP-SR
.375
NC - - - - 15 20 24 28 31 36 41
09x09 CFM 57 85 113 141 169 198 226 254 282 338 395
Throws 1-7 3-11 5-14 6-18 7-20 8-22 10-23 11-25 12-26 14-29 17-31
.563
NC - - - 12 17 22 26 29 32 38 42
10x06 CFM 42 63 84 105 126 146 167 188 209 251 292
Throws 1-6 3-9 4-12 5-15 6-17 7-19 8-20 9-21 10-22 12-25 14-27
.417
NC - - - - 16 21 24 28 31 37 41
10x08 CFM 56 84 112 139 167 195 223 251 278 334 390
Throws 1-7 3-11 5-14 6-18 7-20 8-22 9-23 11-25 12-26 14-28 17-31
.556
NC - - - 12 17 22 26 29 32 38 42
10x10 CFM 70 105 139 174 209 243 278 313 347 417 486
Throws 1-8 3-12 5-16 7-20 8-22 9-24 11-26 12-27 13-29 16-32 19-34
.694
NC - - - 13 18 23 27 30 33 39 43
12x06 CFM 50 75 100 125 150 175 200 225 250 300 350
Throws 1-7 3-10 5-14 6-17 7-19 8-21 9-22 10-21 11-25 14-27 16-29
.500
NC - - - 11 17 21 25 29 32 37 42
12x08 CFM 67 101 134 167 201 234 267 301 334 401 467
Throws 1-8 3-12 5-16 7-20 8-22 9-24 10-25 12-27 13-28 16-31 18-34
.667
NC - - - 12 18 23 26 30 33 39 43
12x10 CFM 84 125 167 209 250 292 334 375 417 500 584
Throws 2-9 4-13 6-17 7-12 9-25 10-27 12-28 13-30 15-32 17-35 20-38
.833
NC - - - 13 19 23 27 31 34 40 44
CONTINUED
Size (in) NK Vel 100 150 200 250 300 350 400 450 500 600 700
Neck Area ft Ps .002 .005 .009 .014 .020 .026 .035 .044 .054 .078 .106
12x12 CFM 100 150 200 250 300 350 400 450 500 600 700
SECURITY GRILLES
Throws 2-10 4-14 6-19 8-24 10-27 11-29 13-31 14-33 16-35 19-38 22-41
1.000
NC - - - 14 20 24 28 32 35 40 45
14x08 CFM 78 117 156 195 234 273 312 351 389 467 545
Throws 2-8 4-13 6-17 7-21 8-24 10-26 11-27 13-29 14-31 17-34 20-36
.778
NC - - - 13 19 23 27 31 34 39 44
14x14 CFM 137 205 273 341 409 477 545 613 681 817 953
Throws 2-11 5-17 7-22 9-28 11-31 13-34 15-36 17-39 19-41 22-44 27-49
1.361
NC - - - 15 21 26 30 33 36 42 46
15x15 CFM 157 235 313 391 469 548 626 704 782 938 1095
2-12 5-18 8-24 10-30 12-34 14-36 16-39 18-41 20-44 24-48 28-51
SGRP-SR
Throws
1.563
NC - - - 16 22 26 30 34 37 42 47
16x10 CFM 112 167 223 278 334 389 445 500 556 667 778
Throws 2-10 4-15 7-20 8-25 10-28 12-31 13-33 15-35 17-37 20-40 23-43
1.111
NC - - - 15 20 25 29 32 35 41 45
16x12 CFM 134 200 267 334 400 467 534 600 667 800 934
Throws 2-11 5-17 7-22 9-28 11-31 13-34 15-36 17-38 18-40 22-44 26-48
1.333
NC - - - 15 21 25 29 33 36 42 46
16x16 CFM 178 267 356 445 534 623 712 801 889 1067 1245
Throws 2-13 5-19 8-25 11-32 13-36 15-39 17-41 19-44 21-46 25-51 30-55
1.778
NC - - - 17 22 27 31 34 37 43 47
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Nk Vel Neck Velocity is the airstream velocity in the duct just before it reaches the supply outlet; measured in Feet per Minute
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
Throw Throw distance in feet are for terminal velocities of 50 and 100fpm respectively
Ps Static pressure = PtPv (inches of water column)
GR278 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES SGRP-SR PERFORMANCE DATA
MODEL SGRP-SR
Size (in) NK Vel 100 150 200 250 300 350 400 450 500 600 700
Neck Area ft Ps .002 .005 .009 .014 .020 .026 .035 .044 .054 .078 .106
18x12 CFM 150 225 300 375 450 525 600 675 750 900 1050
SECURITY GRILLES
Throws 2-12 5-18 8-23 10-29 12-33 14-36 16-38 18-40 19-43 23-47 27-50
1.500
NC - - - 16 21 26 30 33 37 42 47
18x18 CFM 225 338 450 563 675 788 900 1013 1125 1350 1575
Throws 3-14 6-21 10-29 12-36 14-40 17-44 19-47 21-50 24-52 29-57 33-62
2.250
NC - - 11 18 23 28 32 35 38 44 48
20x20 CFM 278 417 556 695 834 973 1112 1251 1389 1667 1945
Throws 3-16 7-24 11-32 13-40 16-25 19-49 21-52 24-55 27-58 32-64 37-69
2.778
NC - - 12 19 24 29 33 36 39 45 49
21x21 CFM 307 460 613 766 919 1073 1226 1379 1532 1838 2145
Throws 3-17 7-25 11-33 14-42 17-47 19-51 22-54 25-58 28-61 33-67 39-72
3.063
SGRP-SR
NC - - 12 19 24 29 33 37 40 45 50
22x22 CFM 337 505 673 841 1009 1177 1345 1513 1681 2017 2353
Throws 3-17 7-26 12-35 15-44 18-49 20-53 23-57 26-61 29-64 35-70 41-75
3.361
NC - - 13 19 25 29 33 37 40 46 50
24x06 CFM 100 150 200 250 300 350 400 450 500 600 700
Throws 2-10 4-14 6-19 8-24 10-27 11-29 13-31 14-33 16-35 19-38 22-41
1.000
NC - - - 14 20 24 28 32 35 40 45
24x08 CFM 134 200 267 334 400 467 534 600 667 800 934
Throws 2-11 5-17 7-22 9-28 11-31 13-34 15-36 17-38 18-40 22-44 26-48
1.333
NC - - - 15 21 25 29 33 36 42 46
24x12 CFM 200 300 400 500 600 700 800 900 1000 1200 1400
Throws 3-14 6-20 9-27 11-34 14-38 16-41 18-44 20-47 23-49 27-54 32-58
2.000
NC - - - 17 23 27 31 35 38 43 48
24x18 CFM 300 450 600 750 900 1050 1200 1350 1500 1800 2100
Throws 3-17 7-25 11-33 14-41 17-47 19-50 22-54 25-57 28-41 33-66 39-71
3.000
NC - - 12 19 24 29 33 36 40 45 50
24x24 CFM 400 600 800 1000 1200 1400 1600 1800 2000 2400 2800
Throws 4-19 8-29 13-38 16-48 19-54 22-58 25-62 29-66 32-70 38-76 45-82
4.000
NC - - 14 20 26 30 34 38 41 46 51
26x26 CFM 470 705 939 1174 1409 1643 1878 2113 2347 2817 3286
Throws 4-21 9-31 14-41 17-52 21-58 24-63 28-67 31-71 34-75 41-83 48-89
4.694
NC - - 14 21 26 31 35 38 42 47 52
CONTINUED
Size (in) NK Vel 100 150 200 250 300 350 400 450 500 600 700
Neck Area ft Ps .002 .005 .009 .014 .020 .026 .035 .044 .054 .078 .106
30x12 CFM 250 375 500 625 750 875 1000 1125 1250 1500 1750
SECURITY GRILLES
Throws 3-15 6-23 10-30 13-38 15-43 18-46 20-49 23-52 25-55 30-60 35-65
2.500
NC - - 11 18 24 28 32 36 39 44 49
30x24 CFM 500 750 1000 1250 1500 1750 2000 2250 2500 3000 3500
Throws 4-21 9-32 14-43 18-53 21-60 25-65 28-70 32-74 36-78 43-85 50-92
5.000
NC - - 14 21 27 31 35 39 42 47 52
30x30 CFM 625 938 1250 1563 1875 2188 2500 2813 3125 3750 4375
Throws 4-24 10-36 16-48 20-60 24-67 28-73 32-78 36-83 40-87 48-95 56-103
6.250
NC - - 15 22 28 32 36 40 43 48 53
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Nk Vel Neck Velocity is the airstream velocity in the duct just before it reaches the supply outlet; measured in Feet per Minute
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
Throw Throw distance in feet are for terminal velocities of 50 and 100fpm respectively
Ps Static pressure = PtPv (inches of water column)
GR280 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
MODEL SGRH
The SGRH medium security return grille is designed to obstruct vision
into the ductwork. The SGRH is constructed with a reinforced steel
face plate of fixed horizontal blades and a wire mesh screen secured
behind the blades. The face plate is welded to a steel sleeve.
SECURITY GRILLES
14-gauge steel blades with 0 or 40 deflection on 1/2" center
3/16" Holes
SGRH
.125 Aluminum Sleeve On 9/32" Centers
Stitch Welded X = Sleeve Length Staggered
Face Plate Minimum 4"
Stitch Welded Maximum 16"
To Sleeve
GR282 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SGRH MODEL NUMBER SPECIFICATION
MEDIUM SECURITY RETURN GRILLE
Model Neck
SGRH 6 8 10 12 14 16 18 20 22 24 26 Sleeve
6 X X X X X X X X X X X
8 X X X X X X X X X X X
SECURITY GRILLES
10 X X X X X X X X X X X
12 X X X X X X X X X X X
14 X X X X X X X X X X X
16 X X X X X X X X X X X
18 X X X X X X X X X X X
20 X X X X X X X X X X X
22 X X X X X X X X X X X
24 X X X X X X X X X X X
26 X X X X X X X X X X X
4 - 16
28 X X X X X X X X X X X
30 X X X X X X X X X X X
SGRH
32 X X X X X X X X X X X
34 X X X X X X X X X X X
36 X X X X X X X X X X X
38 X X X X X X X X X X X
40 X X X X X X X X X X X
42 X X X X X X X X X X X
44 X X X X X X X X X X X
46 X X X X X X X X X X X
48 X X X X X X X X X X X
10 X X X X X X X X X X X
12 X X X X X X X X X X X
14 X X X X X X X X X X X
16 X X X X X X X X X X X
18 X X X X X X X X X X X
20 X X X X X X X X X X X
22 X X X X X X X X X X X
24 X X X X X X X X X X X
26 X X X X X X X X X X X
4 - 16
28 X X X X X X X X X X X
30 X X X X X X X X X X X
SGRH
32 X X X X X X X X X X X
34 X X X X X X X X X X X
36 X X X X X X X X X X X
38 X X X X X X X X X X X
40 X X X X X X X X X X X
42 X X X X X X X X X X X
44 X X X X X X X X X X X
46 X X X X X X X X X X X
48 X X X X X X X X X X X
GR284 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES SGRH PERFORMANCE DATA
MODEL SGRH
Size (in) NK Vel 100 150 200 250 300 350 400 450 500 600 700
Neck Area ft Ps .002 .004 .008 .012 .018 .024 .032 .040 .049 .071 .096
SECURITY GRILLES
.250 NC - - - - - - 11 18 21 27 31
08x06 CFM 34 50 67 84 100 117 134 150 167 200 234
.333 NC - - - - - 12 16 19 22 28 32
08x08 CFM 45 67 89 111 134 156 178 200 222 267 311
.444 NC - - - - - 13 17 20 24 29 34
09x06 CFM 38 57 75 94 113 132 150 169 188 225 263
.375 NC - - - - - 12 16 20 23 28 33
09x09 CFM 57 85 113 141 169 198 226 254 282 338 395
.563 NC - - - - - 14 18 22 25 30 35
10x06 CFM 42 63 84 105 126 146 167 188 209 251 292
SGRH
.417 NC - - - - - 13 17 20 23 29 33
10x10 CFM 70 105 139 174 209 243 278 313 347 417 486
.694 NC - - - - - 15 19 22 26 31 36
12x06 CFM 50 75 100 125 150 175 200 225 250 300 350
.500 NC - - - - - 13 17 21 24 30 34
12x08 CFM 67 101 134 167 201 234 267 301 334 401 467
.667 NC - - - - - 15 19 22 25 31 36
12x10 CFM 84 125 167 209 250 292 334 375 417 500 584
.833 NC - - - - 11 16 20 23 26 32 36
12x12 CFM 100 150 200 250 300 350 400 450 500 600 700
1.000 NC - - - - 12 16 20 24 27 33 37
14x14 CFM 137 205 273 341 409 477 545 613 681 817 953
1.361 NC - - - - 13 18 22 25 29 34 39
15x15 CFM 157 235 313 391 469 548 626 704 782 938 1095
1.563 NC - - - - 14 18 22 26 29 35 39
16x12 CFM 134 200 267 334 400 467 534 600 667 800 934
1.333 NC - - - - 13 18 22 25 28 34 38
16x16 CFM 178 267 356 445 534 623 712 801 889 1067 1245
1.778 NC - - - - 14 19 23 26 30 35 40
18x06 CFM 75 113 150 188 225 263 300 338 375 450 525
.750 NC - - - - 11 15 19 23 26 31 36
18x08 CFM 100 150 200 250 300 350 400 450 500 600 700
1.000 NC - - - - 12 16 20 24 27 33 37
18x15 CFM 188 282 375 469 563 657 750 844 938 1125 1313
1.875 NC - - - - 15 19 23 27 30 35 40
CONTINUED
Size (in) NK Vel 100 150 200 250 300 350 400 450 500 600 700
Neck Area ft Ps .002 .004 .008 .012 .018 .024 .032 .040 .049 .071 .096
18x18 CFM 225 338 450 563 675 788 900 1013 1125 1350 1575
2.250 - - - - 15 20 24 27 31 36 41
SECURITY GRILLES
NC
20x20 CFM 278 417 556 695 834 973 1112 1251 1389 1667 1945
2.778 NC - - - 11 16 21 25 28 32 37 42
21x12 CFM 175 263 350 438 525 613 700 788 875 1050 1225
1.750 NC - - - - 14 19 23 26 30 35 40
21x21 CFM 307 460 613 766 919 1073 1226 1379 1532 1838 2145
3.063 NC - - - 11 17 21 25 29 32 37 42
22x22 CFM 337 505 673 841 1009 1177 1345 1513 1681 2017 2353
3.361 NC - - - 12 17 22 26 29 32 38 43
24x08 CFM 134 200 267 334 400 467 534 600 667 800 934
SGRH
1.333 NC - - - - 13 18 22 25 28 34 38
24x12 CFM 200 300 400 500 600 700 800 900 1000 1200 1400
2.000 NC - - - - 15 19 23 27 30 36 40
24x15 CFM 250 375 500 625 750 875 1000 1125 1250 1500 1750
2.500 NC - - - - 16 20 24 28 31 37 41
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Nk Vel Neck Velocity is the airstream velocity in the duct just before it reaches the supply outlet; measured in Feet per Minute
Ps Static pressure = PtPv (inches of water column)
NC Noise criterion, sound pressure level NC ratings are based on sound power
GR286 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
MODEL SGWM
The SGWM medium security grille is designed to provide a high
volume of air in areas such as dining halls, corridors or exercise
facilities. It is constructed with a steel woven wire mesh backed
face plate welded to a steel sleeve.
SECURITY GRILLES
12-gauge steel face plate
SGWM - 1/8" Wired Mesh in a 1" Flange Frame for Duct Mounting
Listed Size+ 2
r List Size-1/4"
I
- I I
Face Plate to Frame
Weld 3" O.C.
r Face
I
rm---- ----I I I
SGWM
Plate
I I 1/8" Wire I :
I I Mesh 3/16"0
I I Hole
I I
I I
I I .3125
I I
I I Face
I I Plate
lm
\
A- \_
1/8 II Wire Section A-A
Face View Mesh
GR288 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SGWM MODEL NUMBER SPECIFICATION
MEDIUM SECURITY RETURN GRILLE
Model Neck
SGWM 6 8 9 10 12 14 15 16 18 20 21 22 24 26 Sleeve
6 X X X X X X X X X X X X X X
8 X X X X X X X X X X X X X
SECURITY GRILLES
9 X X X X X X X X X X X X
10 X X X X X X X X X X X
12 X X X X X X X X X X
14 X X X X X X X X X
15 X X X X X X X X 4 - 16
16 X X X X X X X
18 X X X X X X
20 X X X X X
21 X X X X
22 X X X
24 X X
SGWM
26 X
9 X X X X X X X X X X X
10 X X X X X X X X X X X
12 X X X X X X X X X X X
14 X X X X X X X X X X X
15 X X X X X X X X X X X
16 X X X X X X X X X X X
18 X X X X X X X X X X X
20 X X X X X X X X X X X
21 X X X X X X X X X X X
22 X X X X X X X X X X X
24 X X X X X X X X X X X 4 - 16
SGWM
26 X X X X X X X X X X X
28 X X X X X X X X X X X
30 X X X X X X X X X X
32 X X X X X X X X X
34 X X X X X X X X
36 X X X X X X X
38 X X X X X X
40 X X X X X
42 X X X X
44 X X X
46 X X
48 X
GR290 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES SGWM PERFORMANCE DATA
MODEL SGWM
Size (in) NK Vel 100 150 200 250 300 350 400 450 500 600 700
Neck Area ft Ps .003 .006 .010 .016 .023 .031 .040 .051 .063 .071 .096
SECURITY GRILLES
.250 NC - - - - - - - 11 13 16 18
08x06 CFM 27 40 53 67 80 93 106 120 133 159 186
.333 NC - - - - - - 11 13 15 17 20
.444 NC - - - - - - 12 14 16 19 21
.375 NC - - - - - - 12 13 15 18 20
09x09 CFM 48 71 95 118 142 165 189 212 236 283 330
.563 NC - - - - - 12 14 15 17 20 22
SGWM
.417 NC - - - - - - 12 14 16 19 21
10x10 CFM 60 89 119 149 178 208 238 267 297 356 416
.694 NC - - - - - 13 15 16 18 21 23
12x06 CFM 41 62 82 103 123 144 164 185 205 246 287
.500 NC - - - - - 11 13 15 16 19 22
12x08 CFM 57 85 113 142 170 198 226 255 283 339 396
.667 NC - - - - - 12 14 16 18 21 23
12x10 CFM 73 109 145 181 217 253 289 325 361 433 505
.833 NC - - - - 11 13 15 17 19 22 24
12x12 CFM 88 132 176 220 264 308 352 396 440 528 616
1.000 NC - - - - 12 14 16 18 20 23 25
14x14 CFM 122 183 244 305 366 427 488 549 610 732 854
1.361 NC - - - - 13 16 18 20 21 24 26
15x15 CFM 141 212 282 353 423 494 564 635 705 846 987
1.563 NC - - - 11 14 16 18 20 22 25 27
16x12 CFM 120 179 239 298 358 417 477 536 596 715 834
1.333 NC - - - - 13 16 18 19 21 24 26
16x16 CFM 162 243 324 404 485 566 647 728 808 970 1132
1.778 NC - - - 12 15 17 19 21 22 25 28
18x06 CFM 63 95 126 157 189 220 252 283 314 377 440
.750 NC - - - - - 13 15 17 18 21 24
CONTINUED
Neck Area ft Ps .003 .006 .010 .016 .023 .031 .040 .051 .063 .071 .096
18x08 CFM 87 131 174 217 261 304 348 391 434 521 608
1.000 NC - - - - 12 14 16 18 20 23 25
SECURITY GRILLES
18x15 CFM 171 256 341 427 512 597 682 768 853 1023 1194
1.875 NC - - - 12 15 17 19 21 23 25 28
18x18 CFM 207 310 413 516 620 723 826 929 1032 1239 1445
2.250 NC - - - 13 16 18 20 22 23 26 27
20x20 CFM 258 387 515 644 773 901 1030 1159 1287 1545 1802
2.778 NC - - - 14 17 19 21 23 24 27 30
21x12 CFM 159 238 317 396 475 554 633 712 791 950 1108
1.750 NC - - - 12 14 17 19 21 22 25 28
21x21 CFM 285 428 570 713 855 998 1140 1283 1425 1710 1995
3.063 NC - - 11 14 17 19 21 23 25 28 30
SGWM
22x22 CFM 314 471 627 784 941 1097 1254 1411 1567 1881 2194
3.361 NC - - 11 15 17 20 22 24 25 28 31
24x08 CFM 117 176 234 293 351 410 468 527 585 702 819
1.333 NC - - - - 13 16 18 19 21 24 26
24x12 CFM 182 273 364 455 546 637 728 819 909 1091 1273
2.000 NC - - - 12 15 17 20 21 23 26 28
24x15 CFM 230 345 460 575 690 805 920 1035 1150 1380 1610
2.500 NC - - - 13 16 18 21 22 24 27 29
24x18 CFM 279 418 557 696 836 975 1114 1253 1392 1671 1949
3.000 NC - - 11 14 17 19 21 23 25 28 30
24x24 CFM 376 564 752 939 1127 1315 1503 1691 1878 2254 2630
4.000 NC - - 12 15 18 21 23 24 26 29 31
26x26 CFM 444 666 888 1110 1332 1554 1776 1998 2219 2663 3107
4.694 NC - - 13 16 19 21 23 25 27 30 32
28x18 CFM 327 491 654 817 981 1144 1308 1471 1634 1961 2288
3.500 NC - - 11 15 18 20 22 24 26 28 31
28x28 CFM 516 773 1031 1288 1546 1804 2061 2319 2576 3092 3607
5.440 NC - - 13 17 20 22 24 26 27 30 33
30x12 CFM 229 343 457 571 686 800 914 1028 1142 1371 1599
2.500 NC - - - 13 16 18 20 22 24 27 29
CONTINUED
GR292 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES SGWM PERFORMANCE DATA
MODEL SGWM
Size (in) NK Vel 100 150 200 250 300 350 400 450 500 600 700
Neck Area ft Ps .003 .006 .010 .016 .023 .031 .040 .051 .063 .071 .096
30x24 CFM 472 708 944 1180 1416 1652 1888 2124 2359 2831 3303
5.000 - - 13 16 19 22 24 25 27 30 32
SECURITY GRILLES
NC
30x30 CFM 595 892 1190 1487 1784 2082 2379 2676 2973 3568 4163
6.250 NC - - 14 17 20 23 25 26 28 31 33
36x12 CFM 276 413 551 688 826 964 1101 1239 1376 1652 1927
3.000 NC - - 11 14 17 19 21 23 25 28 30
36x24 CFM 569 853 1138 1422 1706 1991 2275 2559 2843 3412 3981
6.000 NC - - 14 17 20 22 24 26 28 31 33
36x30 CFM 716 1074 1431 1789 2147 2504 2862 3220 3577 4293 5008
7.500 NC - - 15 18 21 23 25 27 29 32 34
36x36 CFM 863 1294 1725 2156 2588 3019 3450 3881 4312 5175 6037
SGWM
9.000 NC - 11 16 19 22 24 26 28 30 33 35
48x12 CFM 369 554 738 922 1107 1291 1476 1660 1844 2213 2582
4.000 NC - - 12 15 18 20 23 24 26 29 31
48x24 CFM 763 1144 1526 1907 2288 2670 3051 3432 3813 4576 5339
8.000 NC - 11 15 18 21 24 26 28 29 32 34
48x36 CFM 1158 1737 2316 2894 3473 4052 4631 5210 5788 6946 8104
12.000 NC - 12 17 20 23 25 18 29 31 34 36
48x48 CFM 1550 2325 3100 3875 4650 5425 6200 6975 7750 9300 10850
16.000 NC - 14 18 22 24 27 29 31 32 35 37
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Nk Vel Neck Velocity is the airstream velocity in the duct just before it reaches the supply outlet; measured in Feet per Minute
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
Ps Static pressure = PtPv (inches of water column)
MODEL SG5500
The SG5500 minimum security directional ceiling diffuser is designed
for areas where overhead air distribution is required while preventing
Tag:
access to the ductwork. The SG5500 is available in steel (SG5500S),
*AIRE
METAL
Series : SG
aluminum (SG5500AL) and stainless steel (SG5500SS) Submittal
construction. No: SG5500S
SECURITY GRILLES
12-gauge steelSecurity
Minimum lattice faceDiffuser
plate
Steel
13/16" square holes with 3/16" fret bars
Model:
Available inSG5500S-1
1, 2, 3 and 4-way airDiffuser
patternsand Face Plate - Surface Mount
Option: SG5LFP Steel Face Plate For SG5500S-1
SG5500S-1 D5 Diffuser And Face Plate - With Steel Neck Mounted Damper - Surface Mount
SG5500S-1 D5A Diffuser And Face Plate - With Aluminum Neck Mounted Damper - Surface Mount
Model: SG5500S-1 (Minimum Security Diffuser And Face Plate - Surface Mount)
Face View (SG5500S-1 Model)
13
Listed Size 16
Listed Size - 1
8 3
11 16 Typ.
2
SG5500
Listed Size + 5 3
4
Number SG5500S
Model: SG5LFP (Steel Face Plate) 16
3
12 Gauge Plate 16 Typ.
Listed Size + 2 3
16
3
8
Listed Size
Submittal
Model: SG5500S-1 D5 (Minimum Security Diffuser And Face Plate - Surface Mount) - With D5 Steel Neck Mount Damper
Model: SG5500S-1 D5A (Minimum Security Diffuser And Face Plate - Surface Mount) - With D5A Aluminum Neck Mount Damper
SECURITY GRILLES
manufactured by METALAIRE. Units shall be minimum Process shall be anodic electro-deposition using an
security supply ceiling diffusers constructed of steel anodic acrylic paint. Units shall undergo pre-treatment
(SG5500S), aluminum (SG5500AL) or stainless steel including a pressurized spray stage using an alkaline
(SG5500SS). Units shall consist of a 12-gauge steel cleaner and a de-ionized water rinse.
lattice face panel with 13/16" square holes and
3/16" fret bars mounted in front of a fixed pattern
louvered core fastened into a border with spring loaded
latches. Units shall be furnished with screw holes for
tamper proof screws (provided by others). With the lattice
face removed, the core shall be removable without the use
of tools.
Diffuser shall be engineered to perform in variable
SG5500
volume systems and include deflector blades with a
horizontal lip to provide longer throw distances. The
units shall be the size and quantity as outlined in the
plans and specifications.
Diffuser shall be available in 1-way, 2-way opposite,
2-way corner, 3-way, and 4-way directional air patterns.
Optional opposed blade damper shall be constructed of
steel (Model OBD), aluminum (Model OBDA) or stainless
steel (Model OBDSS).
Damper must be operable from the face of the diffuser.
12 X X X X X 02 Satin Silver
15 X X X X 03 Black
18 X X X 4 - 16 28 Custom Color
21 X X Stainless Steel - Standard
24 X 23 Satin Polish
27 Stainless Steel - Optional
30 01 White Painted
02 Satin Silver Painted
03 Black Painted
28 Custom Color
SG5500
GR296 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES SG5500 PERFORMANCE DATA
MODELS SG5500S/SG5500AL/SG5500SS
Size (in) NK Vel 100 150 200 250 300 350 400 450 500 600 700
Neck Area ft Ps .002 .004 .008 .012 .018 .024 .032 .040 .049 .071 .096
SECURITY GRILLES
Throws 1-2 1-2 1-3 1-4 1-5 2-6 3-7 3-8 3-9 4-11 5-12
.250
NC - - - - - 11 15 19 23 29 33
09x09 CFM 56 84 113 141 169 197 225 253 282 338 394
Throws 1-2 1-3 1-5 2-6 3-8 4-10 5-12 6-13 7-14 8-16 8-18
.563
NC - - - - 12 17 22 26 29 35 40
12x12 CFM 100 150 200 250 300 350 400 450 500 600 700
Throws 1-2 1-4 2-6 3-7 4-9 5-10 6-13 6-14 7-16 9-21 10-23
1.000
NC - - - 14 17 22 26 30 33 39 44
15x15 CFM 156 234 313 391 469 547 625 703 782 938 1094
SG5500
Throws 1-4 1-6 2-8 3-10 4-12 5-14 8-16 9-20 10-23 11-27 10-30
1.563
NC - - - 15 20 25 29 33 36 42 47
18x18 CFM 225 338 450 563 675 788 900 1013 1125 1350 1575
Throws 1-4 2-7 3-11 3-14 4-16 6-19 8-22 10-25 11-28 13-32 14-36
2.250
NC - - 11 18 24 29 33 37 40 46 50
21x21 CFM 306 459 613 766 919 1072 1225 1378 1532 1838 2144
Throws 1-5 2-9 3-13 5-16 7-19 8-22 10-25 12-28 13-30 15-37 17-42
3.063
NC - - 13 20 26 31 35 39 42 47 53
24x24 CFM 400 600 800 1000 1200 1400 1600 1800 2000 2400 2800
Throws 1-5 2-9 4-14 6-18 8-22 10-25 12-29 14-32 16-36 18-43 20-47
4.000
NC - - 15 22 28 33 37 41 44 50 54
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Ps Static pressure = PtPv (inches of water column)
Throw Throw distance in feet are for terminal velocities of 150 and 50 fpm respectively (4 Way Air Flow)NC
NC Noise criterion, sound pressure level ratings are based on sound power level (Lw) re: 10-12 watts minus a 10dB room
attenuation in all octave bands
Nk Vel Neck Velocity is the airstream velocity in the duct just before it reaches the supply outlet; measured in feet per minute
MODEL SGRP-AL
The SGRP-AL minimum security grille is designed to create a barrier
to the ductwork behind the grille. The SGRP-AL is constructed with an
aluminum face plate welded to an aluminum sleeve.
1/8" aluminum face plate
SECURITY GRILLES
5/16" Holes
.125 Aluminum Sleeve On 7/16" Centers
Stitch Welded X = Sleeve Length Staggered
Face Plate Minimum 4"
Stitch Welded Maximum 16"
SGRP-AL
To Sleeve
SECURITY GRILLES
have a perforated face plate backed by a stitch-welded
aluminum sleeve. Face plate shall have 5/16" perforations Process shall be anodic electro-deposition using an
on 7/16" staggered centers. The sleeve shall be anodic acrylic paint. Units shall undergo pre-treatment
1/8" aluminum with stitch-welded seams. Units shall including a pressurized spray stage using an alkaline
have a 1" border. cleaner and a de-ionized water rinse.
The units shall be the size and quantity as outlined in the
plans and specifications.
Optional opposed blade damper shall be constructed of
aluminum (Model OBDA).
Rear operation of the damper is recommended.
SGRP-AL
8 X X X X X X X X X X X X X X X
9 X X X X X X X X X X X X X X
10 X X X X X X X X X X X X X
12 X X X X X X X X X X X X
14 X X X X X X X X X X X
15 X X X X X X X X X X
16 X X X X X X X X X
4 - 16
18 X X X X X X X X
20 X X X X X X X
21 X X X X X X
22 X X X X X
SGRP-AL
24 X X X X
26 X X X
28 X X
30 X
GR300 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES SGRP-AL PERFORMANCE DATA
MODEL SGRP-AL
Size (in) NK Vel 100 150 200 250 300 350 400 450 500 600 700
Neck Area ft Ps .002 .004 .008 .012 .018 .024 .032 .040 .049 .071 .096
06x06 CFM 25 38 50 63 75 88 100 113 125 150 175
SECURITY GRILLES
Throws 1-5 2-7 3-10 4-12 5-13 6-15 6-16 7-17 8-17 10-19 11-21
.250
NC - - - - 11 15 19 23 26 31 36
08x06 CFM 34 50 67 84 100 117 134 150 167 200 234
Throws 1-5 2-8 4-11 5-14 6-16 6-17 7-18 8-19 9-20 11-22 13-24
.333
NC - - - - 12 16 20 24 27 33 37
08x08 CFM 45 67 89 111 134 156 178 200 222 267 311
Throws 1-6 3-9 4-13 5-16 6-18 7-19 8-21 10-22 11-23 13-25 15-27
.444
NC - - - - 13 18 22 25 26 34 38
09x06 CFM 38 57 75 94 113 132 150 169 188 225 263
Throws 1-6 3-9 4-12 5-15 6-17 7-18 8-19 9-20 10-21 12-23 14-25
.375
SGRP-AL
NC - - - - 12 17 21 25 28 33 38
09x09 CFM 57 85 113 141 169 198 226 254 282 338 395
Throws 1-7 3-11 5-14 6-18 7-20 8-22 10-23 11-25 12-26 14-29 17-31
.563
NC - - - - 14 19 23 26 29 35 39
10x06 CFM 42 63 84 105 126 146 167 188 209 251 292
Throws 1-6 3-9 4-12 5-15 6-17 7-19 8-20 9-21 10-22 12-25 14-27
.417
NC - - - - 13 18 21 25 28 34 38
10x08 CFM 56 84 112 139 167 195 223 251 278 334 390
Throws 1-7 3-11 5-14 6-18 7-20 8-22 9-23 11-25 12-26 14-28 17-31
.556
NC - - - - 14 19 23 26 29 35 39
10x10 CFM 70 105 139 174 209 243 278 313 347 417 486
Throws 1-8 3-12 5-16 7-20 8-22 9-24 11-26 12-27 13-29 16-32 19-34
.694
NC - - - - 15 20 24 27 30 36 40
12x06 CFM 50 75 100 125 150 175 200 225 250 300 350
Throws 1-7 3-10 5-14 6-17 7-19 8-21 9-22 10-21 11-25 14-27 16-29
.500
NC - - - - 14 18 22 26 29 34 39
12x08 CFM 67 101 134 167 201 234 267 301 334 401 467
Throws 1-8 3-12 5-16 7-20 8-22 9-24 10-25 12-27 13-28 16-31 18-34
.667
NC - - - - 15 20 23 27 30 36 40
12x10 CFM 84 125 167 209 250 292 334 375 417 500 584
Throws 2-9 4-13 6-17 7-12 9-25 10-27 12-28 13-30 15-32 17-35 20-38
.833
NC - - - - 16 20 24 28 31 37 41
12x12 CFM 100 150 200 250 300 350 400 450 500 600 700
Throws 2-10 4-14 6-19 8-24 10-27 11-29 13-31 14-33 16-35 19-38 22-41
1.000
NC - - - 11 17 21 25 29 32 37 42
CONTINUED
Size (in) NK Vel 100 150 200 250 300 350 400 450 500 600 700
Neck Area ft Ps .002 .004 .008 .012 .018 .024 .032 .040 .049 .071 .096
14x08 CFM 78 117 156 195 234 273 312 351 389 467 545
SECURITY GRILLES
Throws 2-8 4-13 6-17 7-21 8-24 10-26 11-27 13-29 14-31 17-34 20-36
.778
NC - - - - 16 20 24 28 31 36 41
14x14 CFM 137 205 273 341 409 477 545 613 681 817 953
Throws 2-11 5-17 7-22 9-28 11-31 13-34 15-36 17-39 19-41 22-44 27-49
1.361
NC - - - 12 18 23 27 30 33 39 44
15x15 CFM 157 235 313 391 469 548 626 704 782 938 1095
Throws 2-12 5-18 8-24 10-30 12-34 14-36 16-39 18-41 20-44 24-48 28-51
1.563
NC - - - 13 19 23 27 31 34 39 44
16x10 CFM 112 167 223 278 334 389 445 500 556 667 778
Throws 2-10 4-15 7-20 8-25 10-28 12-31 13-33 15-35 17-37 20-40 23-43
SGRP-AL
1.111
NC - - - 12 17 22 26 29 32 38 42
16x12 CFM 134 200 267 334 400 467 534 600 667 800 934
Throws 2-11 5-17 7-22 9-28 11-31 13-34 15-36 17-38 18-40 22-44 26-48
1.333
NC - - - 12 18 22 26 30 33 39 43
16x16 CFM 178 267 356 445 534 623 712 801 889 1067 1245
Throws 2-13 5-19 8-25 11-32 13-36 15-39 17-41 19-44 21-46 25-51 30-55
1.778
NC - - - 14 19 24 28 31 34 40 44
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Nk Vel Neck Velocity is the airstream velocity in the duct just before it reaches the supply outlet; measured in Feet per Minute
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
Throw Throw distance in feet are for terminal velocities of 50 and 100fpm respectively
Ps Static pressure = PtPv (inches of water column)
GR302 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES SGRP-AL PERFORMANCE DATA
MODEL SGRP-AL
Size (in) NK Vel 100 150 200 250 300 350 400 450 500 600 700
Neck Area ft Ps .002 .005 .009 .014 .020 .026 .035 .044 .054 .078 .106
18x12 CFM 150 225 300 375 450 525 600 675 750 900 1050
SECURITY GRILLES
Throws 2-12 5-18 8-23 10-29 12-33 14-36 16-38 18-40 19-43 23-47 27-50
1.500
NC - - - 16 21 26 30 33 37 42 47
18x18 CFM 225 338 450 563 675 788 900 1013 1125 1350 1575
Throws 3-14 6-21 10-29 12-36 14-40 17-44 19-47 21-50 24-52 29-57 33-62
2.250
NC - - 11 18 23 28 32 35 38 44 48
20x20 CFM 278 417 556 695 834 973 1112 1251 1389 1667 1945
Throws 3-16 7-24 11-32 13-40 16-25 19-49 21-52 24-55 27-58 32-64 37-69
2.778
NC - - 12 19 24 29 33 36 39 45 49
21x21 CFM 307 460 613 766 919 1073 1226 1379 1532 1838 2145
SGRP-AL
Throws 3-17 7-25 11-33 14-42 17-47 19-51 22-54 25-58 28-61 33-67 39-72
3.063
NC - - 12 19 24 29 33 37 40 45 50
22x22 CFM 337 505 673 841 1009 1177 1345 1513 1681 2017 2353
Throws 3-17 7-26 12-35 15-44 18-49 20-53 23-57 26-61 29-64 35-70 41-75
3.361
NC - - 13 19 25 29 33 37 40 46 50
24x06 CFM 100 150 200 250 300 350 400 450 500 600 700
Throws 2-10 4-14 6-19 8-24 10-27 11-29 13-31 14-33 16-35 19-38 22-41
1.000
NC - - - 14 20 24 28 32 35 40 45
24x08 CFM 134 200 267 334 400 467 534 600 667 800 934
Throws 2-11 5-17 7-22 9-28 11-31 13-34 15-36 17-38 18-40 22-44 26-48
1.333
NC - - - 15 21 25 29 33 36 42 46
24x12 CFM 200 300 400 500 600 700 800 900 1000 1200 1400
Throws 3-14 6-20 9-27 11-34 14-38 16-41 18-44 20-47 23-49 27-54 32-58
2.000
NC - - - 17 23 27 31 35 38 43 48
24x18 CFM 300 450 600 750 900 1050 1200 1350 1500 1800 2100
Throws 3-17 7-25 11-33 14-41 17-47 19-50 22-54 25-57 28-41 33-66 39-71
3.000
NC - - 12 19 24 29 33 36 40 45 50
24x24 CFM 400 600 800 1000 1200 1400 1600 1800 2000 2400 2800
Throws 4-19 8-29 13-38 16-48 19-54 22-58 25-62 29-66 32-70 38-76 45-82
4.000
NC - - 14 20 26 30 34 38 41 46 51
CONTINUED
Size (in) NK Vel 100 150 200 250 300 350 400 450 500 600 700
Neck Area ft Ps .002 .005 .009 .014 .020 .026 .035 .044 .054 .078 .106
26x26 CFM 470 705 939 1174 1409 1643 1878 2113 2347 2817 3286
SECURITY GRILLES
Throws 4-21 9-31 14-41 17-52 21-58 24-63 28-67 31-71 34-75 41-83 48-89
4.694
NC - - 14 21 26 31 35 38 42 47 52
30x12 CFM 250 375 500 625 750 875 1000 1125 1250 1500 1750
Throws 3-15 6-23 10-30 13-38 15-43 18-46 20-49 23-52 25-55 30-60 35-65
2.500
NC - - 11 18 24 28 32 36 39 44 49
30x24 CFM 500 750 1000 1250 1500 1750 2000 2250 2500 3000 3500
Throws 4-21 9-32 14-43 18-53 21-60 25-65 28-70 32-74 36-78 43-85 50-92
5.000
NC - - 14 21 27 31 35 39 42 47 52
30x30 CFM 625 938 1250 1563 1875 2188 2500 2813 3125 3750 4375
Throws 4-24 10-36 16-48 20-60 24-67 28-73 32-78 36-83 40-87 48-95 56-103
SGRP-AL
6.250
NC - - 15 22 28 32 36 40 43 48 53
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Nk Vel Neck Velocity is the airstream velocity in the duct just before it reaches the supply outlet; measured in Feet per Minute
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
Throw Throw distance in feet are for terminal velocities of 50 and 100fpm respectively
Ps Static pressure = PtPv (inches of water column)
GR304 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
MODEL SGRP-SR-AL
The SGRP-SR-AL is a minimum security grille designed as a suicide
deterrent. The small holes inhibit threading objects through the face.
The SGRP-SR-AL is constructed with an aluminum plate welded to an
aluminum sleeve.
SECURITY GRILLES
1/8" aluminum face plate
3/16" Holes
.125 Aluminum Sleeve On 9/32" Centers
Stitch Welded X = Sleeve Length Staggered
Face Plate Minimum 4"
SGRP-SR-AL
Stitch Welded Maximum 16"
To Sleeve
GR306 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SGRP-SR-AL MODEL NUMBER SPECIFICATION
MINIMUM SECURITY 3/16" PERFORATED FACE
WITH 9/32" STAGGERED CENTERS
Model Neck
SGRP-SR-AL 6 8 9 10 12 14 15 16 18 20 21 22 24 26 28 30 Sleeve
6 X X X X X X X X X X X X X X X X
SECURITY GRILLES
8 X X X X X X X X X X X X X X X
9 X X X X X X X X X X X X X X
10 X X X X X X X X X X X X X
12 X X X X X X X X X X X X
14 X X X X X X X X X X X
15 X X X X X X X X X X
16 X X X X X X X X X
4 - 16
18 X X X X X X X X
20 X X X X X X X
21 X X X X X X
22 X X X X X
SGRP-SR-AL
24 X X X X
26 X X X
28 X X
30 X
Size (in) NK Vel 100 150 200 250 300 350 400 450 500 600 700
Neck Area ft Ps .002 .005 .009 .014 .020 .026 .035 .044 .054 .078 .106
06x06 CFM 25 38 50 63 75 88 100 113 125 150 175
SECURITY GRILLES
Throws 1-5 2-7 3-10 4-12 5-13 6-15 6-16 7-17 8-17 10-19 11-21
.250
NC - - - - 14 18 22 26 29 34 39
08x06 CFM 34 50 67 84 100 117 134 150 167 200 234
Throws 1-5 2-8 4-11 5-14 6-16 6-17 7-18 8-19 9-20 11-22 13-24
.333
NC - - - - 15 19 23 27 30 36 40
08x08 CFM 45 67 89 111 134 156 178 200 222 267 311
Throws 1-6 3-9 4-13 5-16 6-18 7-19 8-21 10-22 11-23 13-25 15-27
.444
NC - - - 11 16 21 25 28 31 37 41
09x06 CFM 38 57 75 94 113 132 150 169 188 225 263
SGRP-SR-AL
Throws 1-6 3-9 4-12 5-15 6-17 7-18 8-19 9-20 10-21 12-23 14-25
.375
NC - - - - 15 20 24 28 31 36 41
09x09 CFM 57 85 113 141 169 198 226 254 282 338 395
Throws 1-7 3-11 5-14 6-18 7-20 8-22 10-23 11-25 12-26 14-29 17-31
.563
NC - - - 12 17 22 26 29 32 38 42
10x06 CFM 42 63 84 105 126 146 167 188 209 251 292
Throws 1-6 3-9 4-12 5-15 6-17 7-19 8-20 9-21 10-22 12-25 14-27
.417
NC - - - - 16 21 24 28 31 37 41
10x08 CFM 56 84 112 139 167 195 223 251 278 334 390
Throws 1-7 3-11 5-14 6-18 7-20 8-22 9-23 11-25 12-26 14-28 17-31
.556
NC - - - 12 17 22 26 29 32 38 42
10x10 CFM 70 105 139 174 209 243 278 313 347 417 486
Throws 1-8 3-12 5-16 7-20 8-22 9-24 11-26 12-27 13-29 16-32 19-34
.694
NC - - - 13 18 23 27 30 33 39 43
12x06 CFM 50 75 100 125 150 175 200 225 250 300 350
Throws 1-7 3-10 5-14 6-17 7-19 8-21 9-22 10-21 11-25 14-27 16-29
.500
NC - - - 11 17 21 25 29 32 37 42
12x08 CFM 67 101 134 167 201 234 267 301 334 401 467
Throws 1-8 3-12 5-16 7-20 8-22 9-24 10-25 12-27 13-28 16-31 18-34
.667
NC - - - 12 18 23 26 30 33 39 43
12x10 CFM 84 125 167 209 250 292 334 375 417 500 584
Throws 2-9 4-13 6-17 7-12 9-25 10-27 12-28 13-30 15-32 17-35 20-38
.833
NC - - - 13 19 23 27 31 34 40 44
CONTINUED
GR308 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES SGRP PERFORMANCE DATA
MODEL SGRP-SR-AL
Size (in) NK Vel 100 150 200 250 300 350 400 450 500 600 700
Neck Area ft Ps .002 .005 .009 .014 .020 .026 .035 .044 .054 .078 .106
12x12 CFM 100 150 200 250 300 350 400 450 500 600 700
Throws 2-10 4-14 6-19 8-24 10-27 11-29 13-31 14-33 16-35 19-38 22-41
SECURITY GRILLES
1.000
NC - - - 14 20 24 28 32 35 40 45
14x08 CFM 78 117 156 195 234 273 312 351 389 467 545
Throws 2-8 4-13 6-17 7-21 8-24 10-26 11-27 13-29 14-31 17-34 20-36
.778
NC - - - 13 19 23 27 31 34 39 44
14x14 CFM 137 205 273 341 409 477 545 613 681 817 953
Throws 2-11 5-17 7-22 9-28 11-31 13-34 15-36 17-39 19-41 22-44 27-49
1.361
NC - - - 15 21 26 30 33 36 42 46
15x15 CFM 157 235 313 391 469 548 626 704 782 938 1095
Throws 2-12 5-18 8-24 10-30 12-34 14-36 16-39 18-41 20-44 24-48 28-51
1.563
SGRP-SR-AL
NC - - - 16 22 26 30 34 37 42 47
16x10 CFM 112 167 223 278 334 389 445 500 556 667 778
Throws 2-10 4-15 7-20 8-25 10-28 12-31 13-33 15-35 17-37 20-40 23-43
1.111
NC - - - 15 20 25 29 32 35 41 45
16x12 CFM 134 200 267 334 400 467 534 600 667 800 934
Throws 2-11 5-17 7-22 9-28 11-31 13-34 15-36 17-38 18-40 22-44 26-48
1.333
NC - - - 15 21 25 29 33 36 42 46
16x16 CFM 178 267 356 445 534 623 712 801 889 1067 1245
Throws 2-13 5-19 8-25 11-32 13-36 15-39 17-41 19-44 21-46 25-51 30-55
1.778
NC - - - 17 22 27 31 34 37 43 47
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Nk Vel Neck Velocity is the airstream velocity in the duct just before it reaches the supply outlet; measured in Feet per Minute
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
Throw Throw distance in feet are for terminal velocities of 50 and 100fpm respectively
Ps Static pressure = PtPv (inches of water column)
Throws 2-12 5-18 8-23 10-29 12-33 14-36 16-38 18-40 19-43 23-47 27-50
1.500
NC - - - 16 21 26 30 33 37 42 47
18x18 CFM 225 338 450 563 675 788 900 1013 1125 1350 1575
Throws 3-14 6-21 10-29 12-36 14-40 17-44 19-47 21-50 24-52 29-57 33-62
2.250
NC - - 11 18 23 28 32 35 38 44 48
20x20 CFM 278 417 556 695 834 973 1112 1251 1389 1667 1945
Throws 3-16 7-24 11-32 13-40 16-25 19-49 21-52 24-55 27-58 32-64 37-69
2.778
NC - - 12 19 24 29 33 36 39 45 49
21x21 CFM 307 460 613 766 919 1073 1226 1379 1532 1838 2145
Throws 3-17 7-25 11-33 14-42 17-47 19-51 22-54 25-58 28-61 33-67 39-72
3.063
NC - - 12 19 24 29 33 37 40 45 50
SGRP-SR-AL
22x22 CFM 337 505 673 841 1009 1177 1345 1513 1681 2017 2353
Throws 3-17 7-26 12-35 15-44 18-49 20-53 23-57 26-61 29-64 35-70 41-75
3.361
NC - - 13 19 25 29 33 37 40 46 50
24x06 CFM 100 150 200 250 300 350 400 450 500 600 700
Throws 2-10 4-14 6-19 8-24 10-27 11-29 13-31 14-33 16-35 19-38 22-41
1.000
NC - - - 14 20 24 28 32 35 40 45
24x08 CFM 134 200 267 334 400 467 534 600 667 800 934
Throws 2-11 5-17 7-22 9-28 11-31 13-34 15-36 17-38 18-40 22-44 26-48
1.333
NC - - - 15 21 25 29 33 36 42 46
24x12 CFM 200 300 400 500 600 700 800 900 1000 1200 1400
Throws 3-14 6-20 9-27 11-34 14-38 16-41 18-44 20-47 23-49 27-54 32-58
2.000
NC - - - 17 23 27 31 35 38 43 48
24x18 CFM 300 450 600 750 900 1050 1200 1350 1500 1800 2100
Throws 3-17 7-25 11-33 14-41 17-47 19-50 22-54 25-57 28-41 33-66 39-71
3.000
NC - - 12 19 24 29 33 36 40 45 50
24x24 CFM 400 600 800 1000 1200 1400 1600 1800 2000 2400 2800
Throws 4-19 8-29 13-38 16-48 19-54 22-58 25-62 29-66 32-70 38-76 45-82
4.000
NC - - 14 20 26 30 34 38 41 46 51
26x26 CFM 470 705 939 1174 1409 1643 1878 2113 2347 2817 3286
Throws 4-21 9-31 14-41 17-52 21-58 24-63 28-67 31-71 34-75 41-83 48-89
4.694
NC - - 14 21 26 31 35 38 42 47 52
CONTINUED
GR310 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES SGRP PERFORMANCE DATA
MODEL SGRP-SR-AL
Size (in) NK Vel 100 150 200 250 300 350 400 450 500 600 700
Neck Area ft Ps .002 .005 .009 .014 .020 .026 .035 .044 .054 .078 .106
30x12 CFM 250 375 500 625 750 875 1000 1125 1250 1500 1750
SECURITY GRILLES
Throws 3-15 6-23 10-30 13-38 15-43 18-46 20-49 23-52 25-55 30-60 35-65
2.500
NC - - 11 18 24 28 32 36 39 44 49
30x24 CFM 500 750 1000 1250 1500 1750 2000 2250 2500 3000 3500
Throws 4-21 9-32 14-43 18-53 21-60 25-65 28-70 32-74 36-78 43-85 50-92
5.000
NC - - 14 21 27 31 35 39 42 47 52
30x30 CFM 625 938 1250 1563 1875 2188 2500 2813 3125 3750 4375
Throws 4-24 10-36 16-48 20-60 24-67 28-73 32-78 36-83 40-87 48-95 56-103
6.250
NC - - 15 22 28 32 36 40 43 48 53
SGRP-SR-AL
All data is tested in accordance with ANSI/ASHRAE 70-2006.
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Nk Vel Neck Velocity is the airstream velocity in the duct just before it reaches the supply outlet; measured in Feet per Minute
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
Throw Throw distance in feet are for terminal velocities of 50 and 100fpm respectively
Ps Static pressure = PtPv (inches of water column)
MODEL SG2000
The SG2000 minimum security linear bar grille is designed for
areas with corrosive environments that require limited duct
access. The SG2000 is constructed of heavy gauge aluminum
bars welded to an aluminum frame.
Submittal: SG2000
SECURITY GRILLES
Minimum Security
Fixed 0, 15, Grilles / Registers
or 30 deflection cores
Extruded Aluminum - 1" Border - 7/32" Bars
Optional sleeve available - 1/2"
Security Center
Grille - 0, 15 or 30 Deflection - No Sleeve
Models: SG2000-1 SG2015-1 SG2030-1 Security Grille - 0, 15 or 30 Deflection - Steel Sleeve
SG2000-2 SG2015-2 SG2030-2
Listed
Listed Optional Screen
Width
SG2000
Width
+11
2 -1
2 Cross Bars Welded
To Frame
Optional Screen
Listed
Listed Width
Width Cross Bars Welded
-1 To Frame
+12 1 2 Lengths Over 12" Up to 36"
Wall Sleeve 6 Holes
1 Each End Centered
1 2 Holes Each Side
4" In From End
Recommended Wall Opening
= Listed Size + 1/2 Side View (Both Models)
1
X - Has to be specify (when ordering). Listed Length + 1 2
1
Listed Length - 2
Installation Option
Installation OptionOnly
Only
SG2000-1/SG2015-1/SG2030-1
SG2000-1 / SG2015-1 / SG2030-1
AAB AluminumSAB
AnchorSteel
BarsAnchor Bars
SBR-AL AluminumSBR
SecuritySteel
BarsSecurity Bars Air Pattern Deflectors
LALA-2S LSA- 2S Angle
Loose Aluminum Loose Steel Angle (2AShort
(2 Angles Angles Short Dimensions)
Dimension) 9 30
32 15
LALA-2L LSA - 2L Loose
Loose Aluminum AngleSteel Angle (2 Long
(2 Angles AnglesDimension)
Long Dimensions) 7
LALA-4 4 Loose Aluminum Angles 32
LSA - 4 4 Loose Angles
13
WAF-AL Welded Aluminum
WAF Angle
Welded Frame
Steel Angle Frame 8
SECURITY GRILLES
Units shall have linear bars 7/32" spaced on 1/2" centers
welded to an aluminum frame. Border shall be 1" wide. Process shall be anodic electro-deposition using an
anodic acrylic paint. Units shall undergo pre-treatment
Optional opposed blade damper constructed of aluminum
including a pressurized spray stage using an alkaline
shall be provided on units 4" and wider. Units less than 4"
cleaner and a de-ionized water rinse.
wide shall be provided with an aluminum flap
type damper.
Damper must be operable from the rear of the grille.
SG2000
Model Neck
SG2000-1 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 Sleeve
SG2015-1 4 X X X X X X X X X X X X X X X X
SG2030-1 5 X X X X X X X X X X X X X X X X
SG2000-2 6 X X X X X X X X X X X X X X X X
SG2015-2 7 X X X X X X X X X X X X X X X 4 - 16
SG2030-2 8 X X X X X X X X X X X X X X X
10 X X X X X X X X X X X X X X
12 X X X X X X X X X X X X X
Listed Width Outlet Velocity (Vk) 500 700 900 1000 1100 1200 1300
(In Inches) Total Pressure (Pt) .016 .031 .051 .062 .076 .090 .105
SECURITY GRILLES
Static Pressure (Ps) .012 .024 .040 .050 .060 .072 .084
Free Area Per Foot (ft)
NC - 15 20 23 26 29 31
1 1/2 Flow CFM /FT 31 43 56 62 68 74 81
Throw, Sill or Floor 6-9 9-13 10-14 11-16 13-18 13-19 14-20
.062
Throw, Side Wall 8-11 11-16 13-18 14-20 15-22 17-24 17-25
.110
Throw, Side Wall 8-11 11-16 14-20 16-23 17-24 18-26 20-28
3 Flow CFM /FT 65 91 117 130 143 156 169
Throw, Sill or Floor 7-10 10-15 13-18 15-21 15-22 17-24 18-26
.130
Throw, Side Wall 8-12 13-18 15-22 17-25 18-26 20-28 21-30
3 1/2 Flow CFM /FT 76 106 137 152 167 182 198
Throw, Sill or Floor 7-10 10-15 13-18 15-21 15-22 17-24 18-26
.152
Throw, Side Wall 9-13 13-19 16-23 18-26 20-28 21-30 22-33
4 Flow CFM /FT 88 123 158 176 194 211 229
Throw, Sill or Floor 8-11 12-16 14-20 16-23 18-26 19-27 20-29
.176
Throw, Side Wall 10-14 15-22 17-25 20-29 22-32 24-34 25-36
5 Flow CFM /FT 110 154 198 220 242 264 286
Throw, Sill or Floor 8-12 13-18 15-21 17-24 18-26 19-27 21-30
.220
Throw, Side Wall 10-15 15-22 19-27 22-31 23-33 24-35 27-38
6 Flow CFM /FT 133 186 239 265 292 318 345
Throw, Sill or Floor 8-12 13-18 15-22 17-25 18-26 20-28 21-30
.265
Throw, Side Wall 10-15 15-22 19-27 22-31 23-33 24-35 27-38
CONTINUED
GR314 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SG2000 PERFORMANCE DATA
MODEL SG2000
Listed Width Outlet Velocity (Vk) 500 700 900 1000 1100 1200 1300
(In Inches) Total Pressure (Pt) .016 .031 .051 .062 .076 .090 .105
Static Pressure (Ps) .012 .024 .040 .050 .060 .072 .084
SECURITY GRILLES
Free Area Per Foot (ft)
NC - 15 20 23 26 29 31
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
SG2000
Nk Vel Neck Velocity is the airstream velocity in the duct just before it reaches the supply outlet; measured in Feet per Minute
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
Throw Throw distance in feet are for terminal velocities of 150 and 50 fpm respectively / Supply Air temperature 20 F
below room air temperature.
Pt Total pressures in inches of water column
(In Inches) Total Pressure (Pt) .020 .040 .067 .081 .100 .119 .139
SECURITY GRILLES
Free Area Per Foot Static Pressure (Ps) .017 .034 .056 .070 .084 .100 .118
(ft)
NC 15 20 25 28 31 34 36
1 1/2 Flow CFM /FT 35 49 64 71 78 84 92
Throw, Sill or Floor 5-8 8-12 10-14 11-16 13-18 13-19 14-20
.062
Throw, Side Wall 7-9 10-14 12-16 14-20 15-22 17-24 17-25
2 Flow CFM /FT 49 68 88 98 108 118 128
Throw, Sill or Floor 6-9 9-13 10-14 11-16 13-18 13-19 14-20
.086
Throw, Side Wall 8-10 10-15 13-18 15-21 16-23 17-27 18-26
2 1/2 Flow CFM /FT 63 88 113 126 138 151 163
6-9 9-13 11-16 13-18 13-19 15-21 15-22
SG2000
5 Flow CFM /FT 126 176 226 251 276 301 326
Throw, Sill or Floor 8-12 13-18 15-22 17-25 18-26 20-28 21-30
.220
Throw, Side Wall 10-15 15-22 19-27 22-31 23-33 24-35 27-38
6 Flow CFM /FT 151 212 272 302 333 363 393
Throw, Sill or Floor 9-13 13-18 15-22 17-25 18-26 20-28 21-30
.265
Throw, Side Wall 10-15 15-22 19-27 22-31 23-33 24-35 27-38
8 Flow CFM /FT 203 284 366 406 447
CONTINUED
GR316 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SG2000 PERFORMANCE DATA
MODEL SG2000
Listed Width Outlet Velocity (Vk) 500 700 900 1000 1100 1200 1300
(In Inches) Total Pressure (Pt) .020 .040 .067 .081 .100 .119 .139
Free Area Per Foot Static Pressure (Ps) .017 .034 .056 .070 .084 .100 .118
(ft) NC 15 20 25 28 31 34 36
SECURITY GRILLES
10 Flow CFM /FT 254 356 458 509
Throw, Sill or Floor 10-15 15-22 18-26 21-30
.446
Throw, Side Wall 13-19 20-28 23-33 26-37
12 Flow CFM /FT 306 428 550
Throw, Sill or Floor 12-17 22-31 21-30
.536
Throw, Side Wall 15-21 24-35 27-38
SG2000
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Nk Vel Neck Velocity is the airstream velocity in the duct just before it reaches the supply outlet; measured in Feet per Minute
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
Throw Throw distance in feet are for terminal velocities of 150 and 50 fpm respectively / Supply Air temperature 20 F
below room air temperature.
Pt Total pressures in inches of water column
MODEL SGLF
The SGLF minimum security lattice face grille is designed to prevent
access to ductwork and other systems in minimally supervised areas.
The SGLF is available in steel (SGLF), aluminum (SGLF-AL) and stainless
steel (SGLF-SS) construction.
SECURITY GRILLES
A
SGLF
1"
Listed Size + 2" 12 Gauge Steel Listed Size + 2"
SECURITY GRILLES
security supply ceiling diffusers constructed of steel
(SGLF), aluminum (SGLF-AL) or stainless steel (SGLF-SS) Process shall be anodic electro-deposition using an
Units shall consist of a 12-gauge steel lattice face panel anodic acrylic paint. Units shall undergo pre-treatment
with 13/16" square holes and 3/16" fret bars. including a pressurized spray stage using an alkaline
cleaner and a de-ionized water rinse.
Units shall be attached to a 3/16" stitch welded sleeve.
SGLF
9 X X X X X X X X X X X
10 X X X X X X X X X X X
12 X X X X X X X X X X X
14 X X X X X X X X X X X
15 X X X X X X X X X X X
16 X X X X X X X X X X X
18 X X X X X X X X X X X
20 X X X X X X X X X X X
21 X X X X X X X X X X X
22 X X X X X X X X X X X
4 - 16
24 X X X X X X X X X X X
SGLF
26 X X X X X X X X X X X
28 X X X X X X X X X X X
30 X X X X X X X X X X
32 X X X X X X X X X
34 X X X X X X X X
36 X X X X X X X
38 X X X X X X
40 X X X X X
42 X X X X
44 X X X
46 X X
48 X
GR320 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES SGLF PERFORMANCE DATA
MODEL SGLF
Size (in) NK Vel 100 150 200 250 300 350 400 450 500 600 700
Neck Area ft Ps .002 .004 .008 .012 .018 .024 .032 .040 .049 .071 .096
SECURITY GRILLES
Throws 1-5 2-7 3-10 4-12 5-13 6-15 6-16 7-17 8-17 10-19 11-21
.250
NC - - - - 11 15 19 23 26 31 36
Throws 1-5 2-8 4-11 5-14 6-16 6-17 7-18 8-19 9-20 11-22 13-24
.333
NC - - - - 12 16 20 24 27 33 37
08x08 CFM 45 67 89 111 134 156 178 200 222 267 311
Throws 1-6 3-9 4-13 5-16 6-18 7-19 8-21 10-22 11-23 13-25 15-27
.444
NC - - - - 13 18 22 25 26 34 38
SGLF
NC - - - - 12 17 21 25 28 33 38
09x09 CFM 57 85 113 141 169 198 226 254 282 338 395
Throws 1-7 3-11 5-14 6-18 7-20 8-22 10-23 11-25 12-26 14-29 17-31
.563
NC - - - - 14 19 23 26 29 35 39
10x06 CFM 42 63 84 105 126 146 167 188 209 251 292
Throws 1-6 3-9 4-12 5-15 6-17 7-19 8-20 9-21 10-22 12-25 14-27
.417
NC - - - - 13 18 21 25 28 34 38
10x08 CFM 56 84 112 139 167 195 223 251 278 334 390
Throws 1-7 3-11 5-14 6-18 7-20 8-22 9-23 11-25 12-26 14-28 17-31
.556
NC - - - - 14 19 23 26 29 35 39
10x10 CFM 70 105 139 174 209 243 278 313 347 417 486
Throws 1-8 3-12 5-16 7-20 8-22 9-24 11-26 12-27 13-29 16-32 19-34
.694
NC - - - - 15 20 24 27 30 36 40
12x06 CFM 50 75 100 125 150 175 200 225 250 300 350
Throws 1-7 3-10 5-14 6-17 7-19 8-21 9-22 10-21 11-25 14-27 16-29
.500
NC - - - - 14 18 22 26 29 34 39
12x08 CFM 67 101 134 167 201 234 267 301 334 401 467
Throws 1-8 3-12 5-16 7-20 8-22 9-24 10-25 12-27 13-28 16-31 18-34
.667
NC - - - - 15 20 23 27 30 36 40
12x10 CFM 84 125 167 209 250 292 334 375 417 500 584
Throws 2-9 4-13 6-17 7-12 9-25 10-27 12-28 13-30 15-32 17-35 20-38
.833
NC - - - - 16 20 24 28 31 37 41
CONTINUED
Size (in) NK Vel 100 150 200 250 300 350 400 450 500 600 700
Neck Area ft Ps .002 .004 .008 .012 .018 .024 .032 .040 .049 .071 .096
12x12 CFM 100 150 200 250 300 350 400 450 500 600 700
SECURITY GRILLES
Throws 2-10 4-14 6-19 8-24 10-27 11-29 13-31 14-33 16-35 19-38 22-41
1.000
NC - - - 11 17 21 25 29 32 37 42
14x08 CFM 78 117 156 195 234 273 312 351 389 467 545
Throws 2-8 4-13 6-17 7-21 8-24 10-26 11-27 13-29 14-31 17-34 20-36
.778
NC - - - - 16 20 24 28 31 36 41
14x14 CFM 137 205 273 341 409 477 545 613 681 817 953
Throws 2-11 5-17 7-22 9-28 11-31 13-34 15-36 17-39 19-41 22-44 27-49
1.361
NC - - - 12 18 23 27 30 33 39 44
15x15 CFM 157 235 313 391 469 548 626 704 782 938 1095
Throws 2-12 5-18 8-24 10-30 12-34 14-36 16-39 18-41 20-44 24-48 28-51
SGLF
1.563
NC - - - 13 19 23 27 31 34 39 44
16x10 CFM 112 167 223 278 334 389 445 500 556 667 778
Throws 2-10 4-15 7-20 8-25 10-28 12-31 13-33 15-35 17-37 20-40 23-43
1.111
NC - - - 12 17 22 26 29 32 38 42
16x12 CFM 134 200 267 334 400 467 534 600 667 800 934
Throws 2-11 5-17 7-22 9-28 11-31 13-34 15-36 17-38 18-40 22-44 26-48
1.333
NC - - - 12 18 22 26 30 33 39 43
16x16 CFM 178 267 356 445 534 623 712 801 889 1067 1245
Throws 2-13 5-19 8-25 11-32 13-36 15-39 17-41 19-44 21-46 25-51 30-55
1.778
NC - - - 14 19 24 28 31 34 40 44
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Nk Vel Neck Velocity is the airstream velocity in the duct just before it reaches the supply outlet; measured in Feet per Minute
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
Throw Throw distance in feet are for terminal velocities of 50 and 100fpm respectively
Ps Static pressure = PtPv (inches of water column)
GR322 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SERIES SGLF PERFORMANCE DATA
MODEL SGLF
Size (in) NK Vel 100 150 200 250 300 350 400 450 500 600 700
Neck Area ft Ps .002 .004 .008 .012 .018 .024 .032 .040 .049 .071 .096
18x12 CFM 150 225 300 375 450 525 600 675 750 900 1050
SECURITY GRILLES
Throws 2-12 5-18 8-23 10-29 12-33 14-36 16-38 18-40 19-43 23-47 27-50
1.500
NC - - - 13 18 23 27 30 34 39 44
18x18 CFM 225 338 450 563 675 788 900 1013 1125 1350 1575
Throws 3-14 6-21 10-29 12-36 14-40 17-44 19-47 21-50 24-52 29-57 33-62
2.250
NC - - - 15 20 25 29 32 35 41 45
20x20 CFM 278 417 556 695 834 973 1112 1251 1389 1667 1945
Throws 3-16 7-24 11-32 13-40 16-25 19-49 21-52 24-55 27-58 32-64 37-69
2.778
NC - - - 16 21 26 30 33 36 42 46
21x21 CFM 307 460 613 766 919 1073 1226 1379 1532 1838 2145
SGLF
Throws 3-17 7-25 11-33 14-42 17-47 19-51 22-54 25-58 28-61 33-67 39-72
3.063
NC - - - 16 21 26 30 34 37 42 47
22x22 CFM 337 505 673 841 1009 1177 1345 1513 1681 2017 2353
Throws 3-17 7-26 12-35 15-44 18-49 20-53 23-57 26-61 29-64 35-70 41-75
3.361
NC - - - 16 22 26 30 34 37 43 47
24x06 CFM 100 150 200 250 300 350 400 450 500 600 700
Throws 2-10 4-14 6-19 8-24 10-27 11-29 13-31 14-33 16-35 19-38 22-41
1.000
NC - - - 11 17 21 25 29 32 37 42
24x08 CFM 134 200 267 334 400 467 534 600 667 800 934
Throws 2-11 5-17 7-22 9-28 11-31 13-34 15-36 17-38 18-40 22-44 26-48
1.333
NC - - - 12 18 22 26 30 33 39 43
24x12 CFM 200 300 400 500 600 700 800 900 1000 1200 1400
Throws 3-14 6-20 9-27 11-34 14-38 16-41 18-44 20-47 23-49 27-54 32-58
2.000
NC - - - 14 20 24 28 32 35 40 45
24x18 CFM 300 450 600 750 900 1050 1200 1350 1500 1800 2100
Throws 3-17 7-25 11-33 14-41 17-47 19-50 22-54 25-57 28-41 33-66 39-71
3.000
NC - - - 16 21 26 30 33 37 42 47
24x24 CFM 400 600 800 1000 1200 1400 1600 1800 2000 2400 2800
Throws 4-19 8-29 13-38 16-48 19-54 22-58 25-62 29-66 32-70 38-76 45-82
4.000
NC - - 11 17 23 27 31 35 39 43 48
CONTINUED
Size (in) NK Vel 100 150 200 250 300 350 400 450 500 600 700
Neck Area ft Ps .002 .004 .008 .012 .018 .024 .032 .040 .049 .071 .096
26x26 CFM 470 705 939 1174 1409 1643 1878 2113 2347 2817 3286
SECURITY GRILLES
Throws 4-21 9-31 14-41 17-52 21-58 24-63 28-67 31-71 34-75 41-83 48-89
4.694
NC - - 11 18 23 28 32 35 39 44 49
30x12 CFM 250 375 500 625 750 875 1000 1125 1250 1500 1750
Throws 3-15 6-23 10-30 13-38 15-43 18-46 20-49 23-52 25-55 30-60 35-65
2.500
NC - - - 15 21 25 29 33 36 41 46
30x24 CFM 500 750 1000 1250 1500 1750 2000 2250 2500 3000 3500
Throws 4-21 9-32 14-43 18-53 21-60 25-65 28-70 32-74 36-78 43-85 50-92
5.000
NC - - 11 18 24 28 32 36 39 44 49
30x30 CFM 625 938 1250 1563 1875 2188 2500 2813 3125 3750 4375
Throws 4-24 10-36 16-48 20-60 24-67 28-73 32-78 36-83 40-87 48-95 56-103
SGLF
6.250
NC - - 12 19 25 29 33 37 40 45 50
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Nk Vel Neck Velocity is the airstream velocity in the duct just before it reaches the supply outlet; measured in Feet per Minute
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
Throw Throw distance in feet are for terminal velocities of 50 and 100fpm respectively
Ps Static pressure = PtPv (inches of water column)
GR324 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
*AIRE
METAL
MODEL SG
SGDB
Tag:
Series : Submittal No: SGDB
Maximum
The SGDB Security Barrier
barrier grille Grilles for openings between secure and
is designed
Steel
non-secured areas that are restricted. The bars are mounted in a
Model: SGDB Duct Bars Welded in Sleeve - 4-12" or 13-16" Sleeve Size
sleeve for installation in a wall. Duct connections can be made at both
ends. The SGDB is available in steel (Model SGDB) or stainless steel
SECURITY GRILLES
(Model SGDB-SS) construction.
3/16" thick sleeve
Two angle frames are included, one welded and the other shipped loose.
3
1 x 1 x 16
9 Angle Frame
Duct + 2 16
One Shipped Loose
6" Max 23
4
Skip Weld
SGDB
Number SGDB
Duct Duct
9 Size
+ 2 16
10 Gauge Sleeve
1"
Submittal
2 Dia. Bar Welded to Sleeve 6" O.C. Sleeve Length As Specified
Cad File Number: SGDB-93 Date: 05/31/2002 Submittal No. SGDB Page: 1 of 1
2001 Metal Industries, Inc. Clearwater, FL All Rights reserved. Printed in U.S.A. (727) 441-2651 Fax (727)443-7167 www.metalaire.com sales@metalaire.com
GR326 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SGDB MODEL NUMBER SPECIFICATION
MODELS SGDB, SDDB-SS, SGDF, SGDF-SS, SGDFF, SGDFF-SS
Neck
Model 6 8 9 10 12 14 15 16 18 20 21 22 24 Sleeve
SGDB 6 X X X X X X X X X X X X X
SDDB-SS 8 X X X X X X X X X X X X
SECURITY GRILLES
SGDF 9 X X X X X X X X X X X
SGDF-SS 10 X X X X X X X X X X
SGDFF 12 X X X X X X X X X
SGDFF-SS 14 X X X X X X X X 4 - 16
15 X X X X X X X
16 X X X X X X
18 X X X X X
20 X X X X
21 X X X
22 X X
24 X
SGDB
Available Finishes
Standard
01 White
Optional
02 Satin Silver
03 Black
28 Custom Color
SGDF 9 X X X X X X X X X X X X
SGDF-SS 10 X X X X X X X X X X X X
SGDFF 12 X X X X X X X X X X X X
SGDFF-SS 14 X X X X X X X X X X X X
15 X X X X X X X X X X X X
16 X X X X X X X X X X X X
18 X X X X X X X X X X X X
20 X X X X X X X X X X X X
21 X X X X X X X X X X X X 4 - 16
22 X X X X X X X X X X X X
24 X X X X X X X X X X X X
SGDB
26 X X X X X X X X X X X X
28 X X X X X X X X X X X
30 X X X X X X X X X X
32 X X X X X X X X X
34 X X X X X X X X
36 X X X X X X X
38 X X X X X X
40 X X X X X
42 X X X X
44 X X X
46 X X
48 X
Available Finishes
Standard
01 White
Optional
02 Satin Silver
03 Black
28 Custom Color
GR328 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
MODEL SGDF
The SGDF barrier grille is designed for openings between secure
and non-secured areas that are restricted. The SGDF is mounted
in a flat frame and is available in steel (SGDF) or stainless steel
(SGDF-SS) construction.
SECURITY GRILLES
Bars are 1/2" round on maximum 6" centers
SGDF
GR330 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SGDF MODEL NUMBER SPECIFICATION
MODELS SGDB, SDDB-SS, SGDF, SGDF-SS, SGDFF, SGDFF-SS
Neck
Model 6 8 9 10 12 14 15 16 18 20 21 22 24 Sleeve
SGDB 6 X X X X X X X X X X X X X
SDDB-SS 8 X X X X X X X X X X X X
SECURITY GRILLES
SGDF 9 X X X X X X X X X X X
SGDF-SS 10 X X X X X X X X X X
SGDFF 12 X X X X X X X X X
SGDFF-SS 14 X X X X X X X X 4 - 16
15 X X X X X X X
16 X X X X X X
18 X X X X X
20 X X X X
21 X X X
22 X X
24 X
SGDF
Available Finishes
Standard
01 White
Optional
02 Satin Silver
03 Black
28 Custom Color
SGDF 9 X X X X X X X X X X X X
SGDF-SS 10 X X X X X X X X X X X X
SGDFF 12 X X X X X X X X X X X X
SGDFF-SS 14 X X X X X X X X X X X X
15 X X X X X X X X X X X X
16 X X X X X X X X X X X X
18 X X X X X X X X X X X X
20 X X X X X X X X X X X X
21 X X X X X X X X X X X X 4 - 16
22 X X X X X X X X X X X X
24 X X X X X X X X X X X X
SGDF
26 X X X X X X X X X X X X
28 X X X X X X X X X X X
30 X X X X X X X X X X
32 X X X X X X X X X
34 X X X X X X X X
36 X X X X X X X
38 X X X X X X
40 X X X X X
42 X X X X
44 X X X
46 X X
48 X
Available Finishes
Standard
01 White
Optional
02 Satin Silver
03 Black
28 Custom Color
GR332 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
MODEL SGDFF
The SGDFF barrier grille is designed for openings between secure and
non-secured areas. The SGDFF is mounted in a flanged frame and is
available in steel (SGDFF) or stainless steel (SGDFF-SS) construction.
Bars are 1/2" round on maximum 6" centers
SECURITY GRILLES
Flange frame is 10-gauge steel and 2" wide
SGDFF
GR334 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SDGFF MODEL NUMBER SPECIFICATION
MODELS SGDB, SDDB-SS, SGDF, SGDF-SS, SGDFF, SGDFF-SS
Neck
Model 6 8 9 10 12 14 15 16 18 20 21 22 24 Sleeve
SGDB 6 X X X X X X X X X X X X X
SDDB-SS 8 X X X X X X X X X X X X
SECURITY GRILLES
SGDF 9 X X X X X X X X X X X
SGDF-SS 10 X X X X X X X X X X
SGDFF 12 X X X X X X X X X
SGDFF-SS 14 X X X X X X X X 4 - 16
15 X X X X X X X
16 X X X X X X
18 X X X X X
20 X X X X
21 X X X
22 X X
24 X
SGDFF
Available Finishes
Standard
01 White
Optional
02 Satin Silver
03 Black
28 Custom Color
SGDF 9 X X X X X X X X X X X X
SGDF-SS 10 X X X X X X X X X X X X
SGDFF 12 X X X X X X X X X X X X
SGDFF-SS 14 X X X X X X X X X X X X
15 X X X X X X X X X X X X
16 X X X X X X X X X X X X
18 X X X X X X X X X X X X
20 X X X X X X X X X X X X
21 X X X X X X X X X X X X 4 - 16
22 X X X X X X X X X X X X
24 X X X X X X X X X X X X
SGDFF
26 X X X X X X X X X X X X
28 X X X X X X X X X X X
30 X X X X X X X X X X
32 X X X X X X X X X
34 X X X X X X X X
36 X X X X X X X
38 X X X X X X
40 X X X X X
42 X X X X
44 X X X
46 X X
48 X
Available Finishes
Standard
01 White
Optional
02 Satin Silver
03 Black
28 Custom Color
GR336 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SECURITY GRILLE FACE PLATES
ONLY AND ACCESSORIES
Face View
A B
5/16"
B = 3/16"
Option
NSH
No Screw
Holes
1/2"
12 Gauge
10 Gauge
Listed Sizes + 2" 3/16" Plate Listed Sizes + 2"
Face View
AND ACCESSORIES
A B
5/16"
B = 3/16"
Option
NSH
No Screw
Holes
1/2"
.125 Plate Aluminum
Listed Size + 2"
Option
SGRPO-AL Face View SGRPO-SR-AL Face View
SH
Screw
Holes
GR338 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
Steel Lattice / Perforated Grille Face Only
Model SGLFO-SS-13 Stainless Steel Lattice Grille Face Only (A = 13/16" X 13/16" Holes )
Model SGLFO-SS-50 Stainless Steel Lattice Grille Face Only (A = 1/2" X 1/2" Holes )
Model SGLFO-SS-75 Stainless Steel Lattice Grille Face Only (A = 3/4" X 3/4" Holes )
Model SGLFO-SS-10 Stainless Steel Lattice Grille Face Only (A = 1" X 1" Holes )
AND ACCESSORIES
A B
5/16"
B = 3/16"
Option
NSH
No Screw
Holes
1/2"
10 Gauge
Listed Size
+ 2"
10 Gauge
Listed Size Listed Size
+ 2" + 2"
SAB SBR
OBD or OBDA OBD or SAB
OBDA LSA (showed SBR
SABLSA-4) SBR LSA
LSA (showed (showed LSA-4)
LSA-4)
SECURITY GRILLE OPTIONS
AND ACCESSORIES
3
Rear 1 1 4pcs. 1" x 1" x 16
Operated 2 3Diameter 3" 2 Diameter Bar On 2 Long; 2 Short Dimension
Long For Concrete1 Maximum 6" Centers 3
1 Rear 1 1
Opposed 4pcs. 1" x 1" xBlock
16 Or Brick Wall. With Mounting Holes and
2 Diameter Bar On Blades2 Diameter 3"2 Long; 2 Short Welded To Sleeve 4pcs. 1" x 1" x 16
2 Diameter 3" Operated Dimension 2 Diameter Bar On 2 Long; 2 Short Dimension
Bolts (Shipped Loose)
Long For Concrete Maximum 6" Centers Long For Concrete Maximum 6" Centers
Opposed With Mounting Holes and With Mounting Holes and
Block Or Brick Wall. Welded To Sleeve Block Or Brick Wall. Welded To Sleeve
Blades Bolts (Shipped Loose) Bolts (Shipped Loose)
BSA WSA WAF
Detail A
3
Rear 1 1 3 4pcs. 1" x 1" x 16
WSA TR
BSA WAF Rear WSA
Operated WSA 1
2Detail A 3"
2 Diameter
WAF 3"
B Concrete
1
WAF 2 Diameter Bar On 4pcs. 1" x 1" x 16 2 Long; 2 Short Dimens
2 Diameter Bar On Detail A 2 Long; 2 Short Dimension
Opposed A C
Operated Diameter Long For Maximum 6" Centers
Long For ConcreteBlock Or Brick Wall. Maximum 6" Centers With Mounting Holes an
Square to Round Transition Opposed Blades Welded Steel Angles
Block Or Brick Wall.
Welded Angle Frame
Welded To Sleeve
Welded To Sleeve With Mounting Holes and
Bolts (Shipped Loose)
Blades Detail
Bolts B
(Shipped Loose)
B A C (Welded Bto sleeve) C
1 C t ti D t il
3 3 3
3 1" x 1" x 16 3 1" x 1" x 16 3 1" x 1" x 16
1" x 1" x 16 Angles Bolted 1" x 1" x 16 Angles Welded 1" x 1" x 16 Detail C
Angles Bolted Angles Welded
Welded Angle Flange Detail C
To Sleeve To Sleeve Welded Angle Flange
(Shipped Loose)
To Sleeve To Sleeve (Shipped Loose)
1 C t ti D t il
1 C t ti D t il
DS
Debris Screen
3
Rear 1 1 4pcs. 1" x 1" x 16
Operated 2 Diameter 3" 2 Diameter Bar On 2 Long; 2 Short Dimension
Long For Concrete Maximum 6" Centers
Opposed With Mounting Holes and
Block Or Brick Wall. Welded To Sleeve
Blades Bolts (Shipped Loose)
GR340 A B C
Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
Detail B
REGISTERS
GRILLES &
GRILLES AND
REGISTERS ACCESSORIES
REGISTERS ACCESSORIES
GRILLES AND
L9
PAGE 342
Square/Rectangular Equalizing Grid
OBDA
PAGE 342
Aluminum Opposed Blade Damper
OBD
PAGE 342
Steel Opposed Blade Damper
TR
PAGE 342
Square to Round Transition
TR DEEP
PAGE 342
Deep Square to Round Transitions
PF
PAGE 343
Plaster Frame
TBPF
PAGE 343
T-bar Plaster Frames permit installation
REGISTERS ACCESSORIES
GRILLES AND
LIPF
PAGE 343
Lay-in Plaster Frame
GR342 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
MODEL L9
Model L9 Square/Rectangular Equalizing Grid
Designed to provide uniform airflow in branch ducts
REGISTERS ACCESSORIES
Pre-tensioned blades adjust individually
Aluminum construction
GRILLES AND
MODEL OBDA/OBD
Model OBDA/OBD square/rectangular opposed blade damper
Tapered blades set in a U-channel frame
Opposed blades on 1" centers
MODEL TBPF
Model TBPF T-bar Plaster Frames permit installation of T-bar
frame style ceiling diffusers into plaster frame or gypsum
REGISTERS ACCESSORIES
ceilings, and are available in standard T-bar sizes. Available Sizes (TBPF & STBPF Models)
Converts T-bar frame to Surface Mount Nominal Overall
12 x 12 13 3/16 x 13 3/16
24 x 12 25 3/16 x 13 3/16
24 x 24 25 3/16 x 25 3/16
36 x 24 37 3/16 x 25 3/16
36 x 36 37 3/16 x 37 3/16
48 x 24 49 3/16 x 25 3/16
48 x 48 49 3/16 x 49 3/16
13 x 13 14 3/16 x 14 3/16
MODEL PF
Model PF sidewall mounted plaster frame provides a uniform
opening in sidewall to accommodate grilles and registers
MODEL LIPF LIPF Lay-In Aluminum Plaster Frame ( Used with -1 Units )
SLIPF Lay-In Steel Plaster Frame (Used with -1 Units)
Face View
GR344 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
CEILING DIFFUSERS
The METALAIRE line of ceiling diffusers is designed for flexibility in application.
This series covers a full range of ceiling diffusers which include square face cone,
louvered face, concentric supply/return, modular, perforated, round and VAV diffusers.
Square face cone diffusers are the most popular and efficient of the
ceiling diffusers. The square cone diffuser provides a true 360 radial
horizontal air flow pattern.
PAGE 2
SQUARE
for applications requiring large volumes of air at low sound levels
and low pressure drops. These units are available in 1, 2, 3 and
4-way air pattern variations that are virtually limitless due to the
CEILING
unique assembly of these diffusers. PAGE 29
CEILING DIFFUSERS
Concentric supply/return diffusers provide an aesthetically
pleasing yet functional solution to Roof Top package single outlet air
distribution requirements. The high induction design ensures a true
DIFFUSERS 5700
horizontal air pattern and rapid mixing of room and primary air. PAGE 90
horizontal air diffusion pattern. For applications requiring a vertical air flow,
the 5700A adjustable model employs movable air deflecting vanes which will
provide vertical downward airflow. PAGE 3
Model 5750 offers the architect the often preferred appearance of a single
air diffusion panel. The diffuser is designed to efficiently handle cooling
temperature differentials of 18-20F at ceiling heights of 8' to 10'. PAGE 17
Model Phenomenator has the highest induction ratio of any commercial air
diffuser available. It is an excellent selection for providing exceptional comfort,
especially in executive offices, conference rooms and board rooms. The
Phenomenator is designed for applications calling for minimal temperature
differences in a space. PAGE 23
CD2 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
MODEL 5700
Model 5700 diffuser is an excellent choice for applications requiring
equal throw in all directions. It provides a tight horizontal 360
discharge pattern for superior induction and occupant comfort.
DIFFUSERS
The 5700 is fitted with a quick-release 2 cone inner assembly for
CEILING
immediate access to the damper and ease of installation.Submittal: 5700
Available in aluminum, aluminized steel and steel construction
Square Face Diffusers
2Cone - Round
One piece Neck
die formed cones provide a smooth, aerodynamically designed surface with no corner joints
Models:
Can beSteel
converted in theAluminized Steel
field to 3 cone Aluminum
diffuser with the addition of the optional snap58
5700-1 5700-1 AS 5700-1 AL Concealed T-Bar
Available in metric 600mm
5700-6 x 600mm
5700-6 AS Lay-in5700-6 AL Lay in T-Bar
5700-6P 5700-6P AL Lay in T-Bar Panel
Available in adjustable horizontal to vertical discharge Model 5700A
5700-7 5700-7 AS Concealed T-Bar
Models: 5700-1 ( Steel - Surface Mount - 24 x 24 ) Models: 5700-1 ( Steel - Surface Mount - 12 x 12 )
5700-1 AS ( Aluminized Steel) 5700-1 AS ( Aluminized Steel)
(Surface Mount - 24 x 24 ) (Surface Mount - 12 x 12 )
5700-1 AL ( Aluminum - Surface Mount - 24 x 24 ) 5700-1 AL ( Aluminum - Surface Mount - 12 x 12 )
1
Neck Size - 8
Neck Size - 18 1
Earthquake Tab 14 1
Latch Tabs 4 Spring Loaded Latches
1
3 58 8 31
23
8 5 4
1
14
1 x 23 1 Ceiling Opening Ceiling Opening = 12 x 12
23 4 4
Overall Face Size = 13 x 13
Overall Diffuser = 24 3 3
4 x 24 4 Available Neck Sizes 6 & 8
Available Neck Sizes 6, 8, 10, 12, 14, 15
5700
Models: 5700-6 ( Steel - Lay in T-Bar - 24 x 24 ) Models: 5700-6 ( Steel - Lay in T-Bar - 12 x 12 )
5700-6 AS ( Aluminized Steel) 5700-6 AS ( Aluminized Steel)
(Lay in T-Bar - 24 x 24 ) (Lay in T-Bar - 12 x 12 )
5700-6 AL ( Aluminum - Lay in T-Bar - 24 x 24 ) 5700-6 AL ( Aluminum - Lay in T-Bar - 12 x 12 )
Neck Size - 81
Neck Size - 81 1 41
Earthquake Tab
Latch Tabs
1 3 41
5
13
8
3 21
CEILING
4 21
T-Bar Module = 24 x 24
Available Neck Sizes 6, 8, 10, 12, 14, 15
SQUARE CEILING DIFFUSERS
Neck Size - 81
Earthquake Tab
Latch Tabs
3 21
4 21
5700
23 38 x 23 38
T-Bar Module = 24 x 24
Available Neck Sizes 6, 8, 10, 12, 14, 15
CD4 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 5700 SPECIFICATIONS
DIFFUSERS
horizontal air pattern.
CEILING
5700-9 Donn Fineline Lay-in
5700
plans and specifications. aluminum frame.
Inlets shall be drawn into the backpan of the diffuser.
Welded inlets are not acceptable. Diffusers shall include Performance Specification
seismic tabs drawn into the backpan. Inner cone The manufacturer shall provide published performance
assemble shall be removable without the aid of tools data. Data shall be tested in accordance to ANSI/
for installation and to access optional damper. Units ASHRAE Standard 70-2006.
requiring tools such as screwdrivers or hex keys to remove
the inner cones are not acceptable. Paint Specification
Process shall be anodic electro-deposition using an
The bottom cone shall have a removable plug in the center
anodic acrylic paint. Units shall undergo pre-treatment
to allow access to adjust an optional damper. Units shall
including a pressurized spray stage using an alkaline
include the option to allow a field-installed third optional
cleaner and a de-ionized water rinse.
cone accessory model Snap-58. Optional third cone shall
be installed into the bottom of the 5700 diffuser without
the use of tools.
Units shall be designed to integrate into the specified
ceiling system.
CD6 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 5700 NUMBER SPECIFICATION
SQUARE FACE DIFFUSER 2 CONE
Model Neck Size Module Available Finishes
5700-6 T-bar Lay-in - Steel 6 Standard Finish
12 x 12
5700-6 AS T-bar Lay-in - Aluminized Steel 8 01 White
DIFFUSERS
5700-6 T-bar Lay-in - Steel 6 Optional Finishes
CEILING
5700-6 AS T-bar Lay-in - Aluminized Steel 8 02 Satin Silver
5700-6 AL T-bar Lay-in - Aluminum 10 03 Black
24 x 24
5700A-6 Adj. T-bar Lay-in - Steel 12 28 Custom Color
5700A-6 AS Adj. T-bar Lay-in - Aluminized Steel 14
5700-7 Concealed Spline - Steel 15
5700-7 AS Concealed Spline - Aluminized Steel
5700A-7 Concealed Spline Adj. - Steel Available Accessories
5700
M5700-6 Metric T-bar Lay-in - Steel 6 Standard Finish
M5700-6 AS Metric T-bar Lay-in - Aluminized Steel 8 01 White
M5700-6 AL Metric T-bar Lay-in - Aluminum 10 600mm x Optional Finishes
12 600mm 02 Satin Silver
14 03 Black
15 28 Custom Color
Available Accessories
G3 Equalizing Grid
BDS Butterfly Damper
RSD Radial Damper
BAF-1 3-Way Directional Baffle
BAF-2 2-Way Directional Baffle
BAF-3 1-Way Directional Baffle
SNAP-58 5700 to 5800 Conversion Cone
TBPF T-Bar Plaster Frame
Ps 0.021 .033 .048 .061 .080 .102 .127 .184 .253 .521
CEILING
Pt 0.031 .049 .071 .091 .120 .153 .189 .274 .375 .770
6
Throw* 2-3-6 3-4-7 3-5-7 3-5-8 4-6-8 4-6-9 5-7-9 6-7-10 6-8-11 8-9-13
Throw 3-4-6 3-5-7 4-5-7 4-6-8 5-6-8 5-6-9 5-7-9 6-7-10 6-8-11 8-10-13
NC - <15 18 20 23 26 28 33 36 44
12 x 12
CFM 140 175 210 245 280 315 350 420 490 700
Ps .029 .046 .066 .090 .118 .149 .184 .265 .360 .735
Pt .039 .062 .089 .121 .158 .199 .246 .354 .482 .984
SQUARE CEILING DIFFUSERS
8
Throw* 3-4-8 3-5-9 4-6-10 5-7-11 5-8-11 6-8-12 7-9-13 8-10-14 9-11-15 10-13-18
Throw 3-5-8 4-6-9 5-7-10 6-7-11 7-8-11 7-8-12 7-9-13 8-10-14 9-11-15 10-13-18
NC - <15 19 22 25 28 31 36 40 46
CFM 80 100 120 135 155 175 195 235 275 395
Ps .014 .021 .031 .039 .051 .065 .081 .118 .161 .332
Pt .024 .037 .053 .069 .091 .116 .143 .207 .283 .582
6
Throw* 2-2-5 2-3-5 2-4-6 3-4-6 3-4-6 4-5-7 4-5-7 5-6-8 5-6-8 6-7-10
Throw 2-4-7 3-5-8 4-6-9 4-6-10 5-7-10 5-8-11 6-8-12 7-9-13 8-10-14 10-12-17
NC - - - - <15 16 18 23 27 43
24 x 24
CFM 140 175 210 245 280 315 350 420 490 700
Ps .016 .025 .036 .048 .063 .080 .099 .142 .194 .395
Pt .026 .040 .058 .079 .103 .131 .161 .232 .316 .645
8
5700
Throw* 2-3-6 3-4-7 3-5-7 4-6-8 4-6-9 5-6-9 5-7-10 6-7-10 7-8-11 8-10-13
Throw 3-5-10 4-6-11 5-7-12 6-9-13 6-10-14 7-10-15 8-11-16 10-12-17 11-13-18 13-16-22
NC - - - - <15 18 21 26 30 55
CD8 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 5700 PERFORMANCE DATA
MODEL 5700/5700A
fpm Vn 400 500 600 700 800 900 1000 1200 1400 2000
Listed
Size Neck Size Pv 0.01 0.016 0.022 0.031 0.04 0.05 0.062 0.09 0.122 0.249
CFM 220 275 325 380 435 490 545 655 765 1090
DIFFUSERS
Ps .019 .030 .042 .057 .075 .096 .118 .171 .233 .473
CEILING
Pt .029 .046 .064 .088 .115 .146 .181 .261 .355 .722
10
Throw* 3-4-8 3-5-8 4-6-9 5-7-10 5-8-11 6-8-11 7-8-12 8-9-13 8-10-14 10-12-17
Throw 4-6-12 5-8-14 6-9-15 7-11-16 8-12-17 9-13-18 10-14-19 12-15-21 13-16-23 16-19-28
NC - - - <15 16 20 24 30 35 63
CFM 315 395 470 550 630 705 785 940 1100 1570
Ps .021 .033 .046 .063 .083 .104 .129 .185 .253 .515
Pt .031 .048 .069 .094 .123 .154 .191 .274 .375 .765
CFM 430 535 640 750 855 960 1070 1285 1495 2140
Ps .026 .041 .058 .080 .104 .131 .163 .234 .377 .650
Pt .036 .056 .081 .110 .144 .181 .225 .324 .440 .900
14
Throw* 4-6-11 5-7-12 6-9-13 7-10-14 8-11-15 9-11-16 10-12-17 11-13-18 11-14-20 14-17-24
Throw 6-9-17 7-11-19 8-13-21 10-15-23 11-17-24 13-18-26 14-19-27 17-21-30 19-23-32 22-27-39
NC - * <15 <15 18 23 28 35 40 57
CFM 490 615 735 860 980 1105 1225 1475 1720 2455
Ps .032 .051 .072 .099 .129 .164 .201 .292 .396 .808
Pt .042 .066 .095 .130 .169 .214 .263 .381 .519 1.057
15
5700
Throw* 4-6-11 5-8-13 6-9-14 7-11-15 8-11-16 9-12-17 10-13-18 11-14-20 12-15-21 15-18-25
Throw 6-9-18 8-11-21 9-14-23 11-16-24 12-18-26 14-20-28 15-21-29 18-23-32 20-24-35 24-29-41
NC - - <15 16 22 27 31 39 46 68
PERFORMANCE NOTES FOR SERIES 5700
All data is tested in accordance with ANSI/ASHRAE 70-2006.
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
fpm Velocity of air stream in Feet per Minute
Pv Velocity pressure (inches of water column)
Pt Total pressure (inches of water column)
Ps Static pressure = PtPv (inches of water column)
Throw* Non-isothermal horizontal throw (supply air temperature 15F colder than average room temperature);
values are for 150, 100 and 50fpm velocities
Throw Isothermal throw (supply air temperature the same as average room temperature);
values are for 150, 100 and 50fpm velocities
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
Vn Neck Velocity
Location: Architect:
access to the damper and ease of installation
Date: Submitted By:
Available
Square FaceinDiffusers
aluminum, aluminized steel and steel construction Submittal: 5800
3 Cone
One- piece
Round Neck
die-formed cones provide a smooth, aerodynamically designed surface with
Models:no corner
Steeljoints Aluminized Steel Aluminum
5800-1 5800-1
Available in metric 600mm AS Lay-in 5800-1 AL Surface Mount
x 600mm
5800-6 5800-6 AS 5800-6 AL Lay in T-Bar
Available in adjustable horizontal to vertical 5800-6P
5800-6P discharge ALModel
Lay5800A
in T-Bar Panel
5800-7
Easily 5800-7 AS
removable cores with no tools required. Concealed T-Bar
SQUARE CEILING DIFFUSERS
Models: 5800-1 ( Steel - Surface Mount - 24 x 24 ) Models: 5800-1 ( Steel - Surface Mount - 12 x 12 )
5800-1 AS ( Aluminized Steel - Surface Mount - 24 x 24 ) 5800-1 AS ( Aluminized Steel - Surface Mount - 12 x 12 )
5800-1 AL ( Aluminum - Surface Mount - 24 x 24 ) 5800-1 AL ( Aluminum - Surface Mount - 12 x 12 )
Neck Size
Earthquake Tab Neck Size - 1 1 1
Latch Tabs
8
4 Spring Loaded -1 14 18 3 21
8
Latches
1 3 21 1
22 43
4
8
1
14
1 x 23 1 Ceiling Opening
23 4 Ceiling Opening = 12 x 12
4
Overall Face Size = 13 x 13
Overall Diffuser = 24 3 3
4 x 24 4
Available Neck Sizes 6, 8
Available Neck Sizes 6, 8, 10, 12, 14, 15
5800
23
3 x 23 3 T-Bar Module = 12 x 12
4 4
T-Bar Module = 24 x 24 Available Neck Sizes 6, 8
Available Neck Sizes 6, 8, 10, 12, 14, 15
Models: 5800-6P ( Steel - Lay in T-Bar Panel - 24 x 24 ) 6" or 8" Inlets Only
5800-6P AL ( Aluminum - Lay in T-Bar Panel - 24 x 24 ) 6" or 8" Inlets Only
1 1
14
Neck Size - 8
Notes:
1. Available Finishes 2. Available Accessories 3. Available Options 4. Construction Details
Standard Finish: Accessories Shipped Unattached x Available Sizes Only as Listed
CD10 x 01 White x Available
x G3 - Equalizing Grid Metal Industries, Inc. For complete product specifications and submittal Neck Sizes as Listed
data, visit us at www.metalaire.com
Optional Finish (extra charge): x BDS - Butterfly Damper
x 02 Satin Silver x RSD - Radial Shutter Damper
5800-6P 5800-6P AL Lay in T-Bar Panel
5800-7 5800-7 AS Concealed T-Bar
5800-9 5800-9 AS 5800-9AL Donn (USG) Ceiling Grid
DIFFUSERS
4 34
CEILING
3 21
Neck Size - 81
Earthquake Tab
Latch Tabs
3 21
4 34
23 38 x 23 38
T-Bar Module = 24 x 24
5800
Models: 5800A-1 ( Steel - Surface Mount )
5800A-1 AS ( Aluminized Steel - Surface Mount )
1 x 23 1
Ceiling Opening = 23 2 2 Pattern Controller
1 Settings For Sizes
Neck Size - 8 11 14/24 and 15/24
Slot Pocked 4
Pattern Controller No. 3
Outer
Notes: ( check if provided) Settings For Sizes Cone
6/24, 8/24, 10/24 Cone No. 2 For Vertical
and 12/24 Cone Downward Pattern 4 38
Metal Industries, Inc. Clearwater, FL (727) 441 - 2651 Fax (800) 865 8383 www.metalaire.com sales@metalaire.com
5800-9 Donn Fineline Lay-in two butterfly style blades that can be adjusted from
full open to full closed. Damper shall be adjusted with a
Non-Adjustable, Horizontal Discharge Pattern screwdriver slot that can be accessed through the face
5800 manufactured by METALAIRE. of the diffuser.
Units shall be constructed of steel.
RADIAL SHUTTER DAMPER
5800 AS manufactured by METALAIRE. METALAIRE model RSD steel round radial shutter damper
Units shall be constructed of aluminized steel.
shall be provided. Damper shall consist of gang operated
5800 AL manufactured by METALAIRE. radial blades that slide perpendicular to air flow direction.
SQUARE CEILING DIFFUSERS
Units shall be constructed of aluminum. The damper shall be adjusted from full open to full closed.
Damper shall be adjusted with a screwdriver slot that can
Adjustable Discharge Pattern be accessed through the face of the diffuser.
5800A manufactured by METALAIRE.
OPPOSED BLADE DAMPER
Units shall be constructed of steel.
METALAIRE model D3 aluminum or SD3 steel round
5800A AS manufactured by METALAIRE.
opposed blade type dampers shall be provided. Damper
Units shall be constructed of aluminized steel.
shall consist of gang operated blades that can be
5800A AL manufactured by METALAIRE. adjusted from full open to full closed. Damper shall be
Units shall be constructed of aluminum. adjusted with a screwdriver slot that can be accessed
Units shall be square with a formed backpan and through the face of the diffuser.
three inner cones. Diffuser shall have the same
EQUALIZING GRID
appearance from the face regardless of inlet size.
The units shall be the size and quantity as outlined in METALAIRE model G3 aluminum round equalizing
5800
the plans and specifications. grid shall be provided. Equalizing grid shall consist
of 1/2" x 1/2" x 1/2" aluminum cubed core mounting in
Optional for Adjustable Pattern an aluminum frame.
Inlets shall be drawn into the backpan of the diffuser. Performance Specification
Welded inlets are not acceptable. Diffusers shall include
The manufacturer shall provide published performance
seismic tabs drawn into the backpan. Inner cone
data. Data shall be tested in accordance to ANSI/
assemble shall be removable without the aid of tools
ASHRAE Standard 70-2006.
for installation and to access optional damper. Units
requiring tools such as screwdrivers or hex keys to remove
Paint Specification
the inner cones are not acceptable.
Process shall be anodic electro-deposition using an
The bottom cone shall have a removable plug in the center anodic acrylic paint. Units shall undergo pre-treatment
to allow access to adjust an optional damper. Units shall including a pressurized spray stage using an alkaline
be designed to integrate into the specified ceiling system. cleaner and a de-ionized water rinse.
Diffuser shall include adjustable deflector blades located
within the cones of the device. Deflectors shall allow
the discharge air to be adjusted to obtain a vertical or
horizontal air pattern.
CD12 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
5800 MODEL NUMBER SPECIFICATION
SQUARE FACE DIFFUSER 3 CONE
Model Neck Size Module Available Finishes
5800-1 Surface Mount - Steel 6 Standard Finish
12 x 12
5800-1 AS Surface Mount - Aluminized Steel 8 01 White
DIFFUSERS
5800-1 AL Surface Mount - Aluminum 6 Optional Finishes
CEILING
5800A-1 Adj. Surface Mount - Steel 8 02 Satin Silver
5800A-1 AS Adj. Surface Mount - Aluminized Steel 10 03 Black
24 x 24
5800A-1 AL Adj. Surface Mount - Aluminum 12 28 Custom Color
14
15
Available Accessories
5800
Available Accessories
G3 Equalizing Grid
BDS Butterfly Damper
RSD Radial Damper
BAF-1 3-Way Directional Baffle
BAF-2 2-Way Directional Baffle
BAF-3 1-Way Directional Baffle
TBPF T-Bar Plaster Frame
CD14 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 5800 PERFORMANCE DATA
MODEL 5800/5800A
fpm Vn 400 500 600 700 800 900 1000 1200 1400 2000
Listed
Size Neck Size Pv 0.01 0.016 0.022 0.031 0.04 0.05 0.062 0.09 0.122 0.249
CFM 80 100 120 135 155 175 195 235 275 315
Ps .026 .040 .058 .073 .097 .123 .153 .223 .305 .400
DIFFUSERS
CEILING
Pt .036 .056 .080 .104 .137 .174 .216 .312 .427 .559
6
Throw* 3-4-6 3-5-7 4-5-7 4-6-8 5-6-8 5-6-9 5-7-9 6-7-10 6-8-11 7-9-12
Throw 2-4-6 3-5-7 4-5-7 4-6-8 5-6-8 5-6-9 5-7-9 6-7-10 6-8-11 7-9-12
12 x 12
NC - <15 18 21 24 26 29 33 35 37
CFM 140 175 210 245 280 315 350 420 490 560
Ps .026 .041 .059 .080 .104 .132 .163 .235 .319 .417
Pt .036 .056 .081 .110 .144 .182 .225 .324 .442 .577
8
Throw* 3-5-8 4-6-9 5-7-10 6-8-11 7-8-11 7-9-12 7-9-13 8-10-14 9-11-15 9-11-16
Throw 3-5-8 4-6-9 5-7-10 6-8-11 6-8-11 7-9-12 7-9-13 8-10-14 9-11-15 9-11-16
5800
Throw* 5-6-9 6-7-10 6-8-11 7-8-12 7-9-12 8-9-13 8-10-14 9-11-15 9-12-16 10-12-18
Throw 4-7-12 6-8-14 7-10-15 8-11-16 9-12-17 10-13-18 11-14-19 12-15-21 13-16-23 14-17-24
24 x 24
NC - - - <15 19 23 27 33 38 40
CFM 315 395 470 550 630 705 785 940 1100 1255
Ps .022 .035 .049 .067 .088 .111 .137 .197 .270 .351
Pt .032 .050 .072 .098 .128 .161 .200 .287 .392 .511
12
Throw* 6-7-11 7-8-12 7-9-13 8-10-14 9-11-15 9-11-16 10-12-17 11-13-18 11-14-20 12-15-21
Throw 5-8-15 7-10-16 8-12-18 9-14-19 11-15-21 12-15-22 13-16-23 15-18-25 16-19-27 17-21-29
NC - - <15 16 21 26 30 36 41 43
CFM 430 535 640 750 855 960 1070 1285 1495 1710
Ps .032 .049 .071 .097 .126 .159 .198 .285 .386 .505
Pt .042 .065 .093 .128 .166 .210 .260 .375 .508 .665
14
Throw* 7-9-12 8-10-14 9-11-15 9-12-16 10-12-17 11-13-18 11-14-19 12-15-21 13-16-23 14-17-25
Throw 6-9-17 8-12-19 9-14-21 11-16-22 12-17-24 14-18-25 15-19-27 17-21-29 18-22-32 20-24-34
NC - - <15 17 22 27 32 39 44 47
CFM 490 615 735 860 980 1105 1225 1475 1720 1965
Ps .036 .056 .080 .109 .142 .181 .222 .322 .438 .571
Pt .046 .072 .102 .140 .182 .231 .284 .412 .560 .731
15
Throw* 7-9-13 9-10-15 9-11-16 10-12-17 11-13-19 11-14-20 12-15-21 13-16-23 14-17-25 15-19-26
Throw 7-10-18 8-12-20 10-15-22 12-17-24 13-18-26 15-19-27 17-20-29 18-22-32 20-24-34 21-26-36
NC - - <15 18 23 29 33 41 46 49
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
fpm Velocity of air stream in Feet per Minute
Pv Velocity pressure (inches of water column)
DIFFUSERS
CD16 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
1 Earthquake Tab
Neck Size - 8 181
Air Diffusion Panel 1
1 18
e Tab Neck Size - 8 1 81 Ceiling Line Mounting Post
Latch Tabs Earthquake Tab Ceiling
1
22 1
22 1 7
Air Diffusion Panel = 9 x 9 8 8
1 Ceiling Ceiling Opening = 12 x 12
8 Air Diffusion Panel = 18 x 18 1
MODEL 5750
Line 8 Overall Face = 13 x 13
Ceiling Opening = 24 x 24
Overall Face = 243
4 x 244
3
DIFFUSERS
heights of 8' to 10'.
CEILING
Available in aluminum, aluminized steel and steel construction
Face panel has rounded off corners with a smooth edge 1
Neck Size - 8 Earthquake Tab 1
1 8
1
Neck Size - 8 1 Air Diffusion Panel 1
1 18
One piece die-formed back pan provides a smooth,
8 Mounting Post
Latch Tabs
aerodynamically designed surface with no corner joints
Earthquake Tab Ceiling Line Ceiling
Models: 5 750-6 (Steel - Lay In T Bar - 24 x 24) Models: 5750-6 (Steel - Lay In T Bar - 12 x 12)
5750-1 AS (Aluminized Steel - Lay In T Bar - 24 x 24) 5750-1 AS (Aluminized Steel - Lay In T Bar - 12 x 12)
5750-1 AL (Aliminum - Lay In T Bar - 24 x 24) 5750-1 AL (Aliminum - Lay In T Bar - 12 x 12)
1
1
Neck Size - 8 1 81 Neck Size - 8 1 81
Latch Tabs Air Diffusion Panel 1
T-Bar By Earthquake Tab Earthquick Tab Mounting Post 18
5750
Others
1 1
22
22
7
Air Diffusion Panel = 9 x 9 8
Air Diffusion Panel = 18 x 18
Overall Face = 11 34 x 11 34
Overall Face = 23 3 3
4 x 23 4 T-Bar Module = 12 x 12
T-Bar Module = 24 x 24
Models: 5 750-7 (Steel - Concealed T-Bar - 24 x 24) Models: 5750-9 (Steel - Donn Ceiling Grid - 24 x 24)
5750-7 AS (Aluminized Steel - Concealed
1
T 1Bar - 24 x 24) 5750-9 AS (Aluminized Steel - Donn Ceiling Grid - 24 x 24)
5750-7 AL
Latch(Aliminum
Tabs - Concealed T Bar - 1248 x 24)
Neck Size - 8
5750-9 AL (Aliminum
Neck 1 - Donn Ceiling1Grid - 24 x 24)
Size - 8 1
T-Bar By Earthquake Tab 8 Air1Diffusion Panel
1 1
18
Others 1 Earthquick Tab Neck Size - 8 18
Mounting Post
Neck Size - 8 1 81 Narrow T-Bar Latch Tabs
Earthquake Tab
Tab T-Bar By Latch Tabs 1 Narrow T-Bar
Earthquake Tab 22 By Others
1 Others By Others
22
1 1
22
22 1 7
Air Diffusion Panel = 18 x 18 22 Air Diffusion Panel = 9 x 9 8
Overall Face = 23 3 3
4 x 23 4 Overall 3
Face = 11Panel 3
Air Diffusion 4 x 11= 418 x 18
AirT-Bar
Diffusion Panel
Module = 18
= 24 x 18
x 24 T-Bar Module = 12 x 123
Overall Face = 23 4 x 23 3
Overall Face = 23 3 3
4 x 23 4
4
T-Bar Module = 24 x 24
T-Bar Module = 24 x 24
1 1 81
2016 Metal Industries,
T-Bar By Inc. Latch Tabs
Neck Size - 8
Earthquake Tab Narrow T-Bar Latch Tabs
1
Neck Size - 8 1 81 CD17 Narrow T-Bar
Earthquake Tab By Others
Others By Others
1 1 1
SERIES 5750 SPECIFICATIONS
5750-9 Donn Fineline Lay-in two butterfly style blades that can be adjusted from full
5750 manufactured by METALAIRE. open to full closed. Damper shall be adjusted with a
Units shall be constructed of steel. screwdriver slot.
5750 AS manufactured by METALAIRE. RADIAL SHUTTER DAMPER
Units shall be constructed of aluminized steel. METALAIRE model RSD steel round radial shutter damper
5750 AL manufactured by METALAIRE. shall be provided. Damper shall consist of gang-operated
Units shall be constructed of aluminum. radial blades that slide perpendicular to air flow direction.
Units shall be square with a formed backpan and a flat The damper shall be adjusted from full open to full closed.
SQUARE CEILING DIFFUSERS
face panel. Face panel shall project no more than 1/4" Damper shall be adjusted with a screwdriver slot.
below the ceiling grid or surface. Diffuser shall have the OPPOSED BLADE DAMPER
same appearance from the face regardless of inlet size.
The units shall be the size and quantity as outlined in the METALAIRE model D3 aluminum or SD3 Steel round
plans and specifications. opposed blade type dampers shall be provided. Damper
shall consist of gang operated blades that can be
Inlets shall be drawn into the backpan of the diffuser. adjusted from full open to full closed. Damper shall be
Welded inlets are not acceptable. Diffusers shall include adjusted with a screwdriver slot.
seismic tabs drawn into the backpan. Face panel shall be
removable without the aid of tools for installation and to EQUALIZING GRID
access optional damper. Units requiring tools to remove METALAIRE model G3 aluminum round equalizing
the inner cones are not acceptable. grid shall be provided. Equalizing grid shall consist of
Units shall be designed to integrate into the specified 1/2" x 1/2" x 1/2" aluminum cubed core mounting in
ceiling system. an aluminum frame.
5750
Performance Specification
The manufacturer shall provide published performance
data. Data shall be tested in accordance to ANSI/
ASHRAE Standard 70-2006.
Paint Specification
Process shall be anodic electro-deposition using an
anodic acrylic paint. Units shall undergo pre-treatment
including a pressurized spray stage using an alkaline
cleaner and a de-ionized water rinse.
CD18 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
5750 MODEL NUMBER SPECIFICATION
SQUARE FACE DIFFUSER PLAQUE FACE
Model Neck Size Module Available Finishes
5750-1 Surface Mount - Steel 6 Standard Finish
12 x 12
5750-1 AS Surface Mount - Aluminized Steel 8 01 White
DIFFUSERS
5750-1 AL Surface Mount - Aluminum 6 Optional Finishes
CEILING
8 02 Satin Silver
10 03 Black
24 x 24
12 28 Custom Color
14
15
Available Accessories
5750
G3 Equalizing Grid
BDS Butterfly Damper
RSD Radial Damper
BO-1 3-Way Blank Off
BO-2 2-Way Blank Off
BO-3 1-Way Blank Off
FGBP Factory Installed R6 Insulation
TBPF T-Bar Plaster Frame (-6 Only)
Available Accessories
G3 Equalizing Grid
BDS Butterfly Damper
RSD Radial Damper
BO-1 3-Way Blank Off
BO-2 2-Way Blank Off
BO-3 1-Way Blank Off
TBPF T-Bar Plaster Frame
CD20 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 5750 PERFORMANCE DATA
MODEL 5750
fpm Vn 400 500 600 700 800 900 1000 1200 1400 2000
Listed
Size Neck Size Pv 0.01 0.016 0.022 0.031 0.04 0.05 0.062 0.09 0.122 0.249
CFM 80 100 120 135 155 175 195 235 275 315
DIFFUSERS
Ps .009 .014 .021 .024 .032 .041 .051 .075 .104 .137
CEILING
Pt .019 .030 .043 .054 .072 .092 .114 .165 .226 .297
6
Throw* 3-4-7 3-5-7 4-6-8 4-6-9 5-6-9 6-7-10 6-7-10 6-8-11 7-9-12 8-9-13
Throw 3-4-7 4-5-7 4-6-8 5-6-9 5-7-9 6-7-10 6-7-10 7-8-11 7-9-12 8-9-13
NC <15 <15 <15 16 18 21 23 27 31 34
12 x 12
CFM 140 175 210 245 280 315 350 420 490 560
Ps .017 .027 .039 .053 .069 .087 .108 .155 .212 .276
Pt .027 .043 .061 .083 .109 .138 .170 .245 .334 .436
5750
Throw* 1-1-6 1-2-7 1-3-9 2-4-10 3-6-11 3-7-12 4-7-13 6-9-14 7-10-15 8-11-16
Throw 1-2-6 2-4-8 2-5-10 3-6-11 4-6-12 5-7-13 5-8-13 6-10-14 7-11-16 9-12-17
NC <15 <15 <15 17 21 25 28 34 39 42
CFM 220 275 325 380 435 490 545 655 765 875
Ps .016 .025 .034 .047 .061 .078 .096 .139 .190 .249
Pt .026 .040 .056 .077 .101 .128 .159 .229 .313 .409
10
Throw* 1-2-7 1-3-9 2-4-11 2-5-13 3-7-14 4-8-15 5-9-16 7-11-17 9-13-19 10-14-20
Throw 1-3-8 2-5-10 3-6-12 4-7-14 5-8-15 6-9-16 7-10-17 8-12-18 9-14-20 11-15-21
NC <15 15 15 21 26 30 33 37 41 43
Ps .027 .042 .059 .081 .107 .133 .165 .236 .324 .422
CEILING
Pt .037 .058 .082 .112 .146 .183 .227 .326 .446 .581
12
Throw* 1-2-9 1-3-11 2-5-13 3-7-15 4-9-17 5-10-18 6-11-19 8-13-21 10-15-23 12-17-24
Throw 2-4-10 2-6-12 4-7-14 5-8-17 6-10-18 7-11-19 8-12-20 10-14-22 11-17-23 13-18-25
NC <15 <15 17 22 27 30 33 38 42 45
CFM 430 535 640 750 855 960 1070 1285 1495 1710
Ps .031 .049 .069 .095 .124 .156 .194 .280 .378 .495
Pt .041 .064 .092 .126 .164 .206 .256 .370 .501 .655
24 x 24
SQUARE CEILING DIFFUSERS
14
Throw* 1-3-10 2-4-13 2-6-15 3-8-18 4-10-20 6-12-21 7-13-22 10-15-24 12-18-26 14-20-28
Throw 2-4-11 3-6-14 4-8-17 6-10-19 7-11-21 8-13-22 9-14-23 11-17-25 13-19-27 15-21-29
NC <15 <15 20 25 30 33 36 40 43 46
CFM 490 615 735 860 980 1105 1225 1475 1720 1965
Ps .038 .060 .086 .117 .152 .194 .238 .345 .469 .613
Pt .048 .076 .108 .148 .192 .244 .300 .435 .592 .772
15
Throw* 1-3-11 2-4-14 3-6-16 4-8-19 5-11-21 6-12-23 7-14-24 11-17-26 13-19-28 15-21-30
Throw 2-4-12 3-7-15 4-9-18 6-10-21 8-12-22 9-13-24 10-15-25 12-18-27 14-21-29 16-22-31
NC <15 <15 20 27 32 35 37 41 44 47
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
fpm Velocity of air stream in Feet per Minute
Pv Velocity pressure (inches of water column)
Pt Total pressure (inches of water column)
Ps Static pressure = PtPv (inches of water column)
Throw* Non-isothermal horizontal throw (supply air temperature 15F colder than average room temperature);
values are for 150, 100 and 50fpm velocities
Throw Isothermal throw (supply air temperature the same as average room temperature);
values are for 150, 100 and 50fpm velocities
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
Vn Neck Velocity
CD22 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
MODEL
PHENOMENATOR
The Model Phenomenator is an excellent selection for providing
DIFFUSERS
exceptional comfort, especially in board rooms and conference
CEILING
*AIRE
METAL
rooms. It has the highest induction ratio of any commercial air
Tag:available.
diffuser
Series
Available :
in aluminized Phenomenator
steel and steel construction Submittal No: PHENOM
Designed for applications requiring minimal temperature differences in a space
Square Face Diffusers - Round Neck
Ultra High
One piece Performance
die-formed back pan provides a smooth surface with no corner joints
Face panel has rounded corners
Models: Steel Aluminized
with aSteel
smooth edge
Phenom-1 Phenom-1 AS Surface Mount
High induction inner core Phenom-6
assembly AS
221
Ceiling
Air Diffusion Panel = 18 x 18 1
Line 8
Ceiling Opening = 24 x 24
Overall Face = 24 3 3
4 x 24 4
PHENOMENATOR
Latch Tabs
T-Bar By Others
1 21
Number PHENOM
3 3
Overall Face = 23 4
x 23 4
T-Bar Spacing = 24 x 24
Overall Face 23 7
7
8 x 23 8
T-Bar Spacing 24 x 24
T-Bar Spacing = 24 x 24
Phenom-9 Donn Fineline Lay-in two butterfly style blades that can be adjusted from full
Phenom manufactured by METALAIRE. open to full closed. Damper shall be adjusted with a
Units shall be constructed of steel. screwdriver slot.
Phenom AS manufactured by METALAIRE. RADIAL SHUTTER DAMPER
Units shall be constructed of aluminized steel.
METALAIRE model RSD steel round radial shutter damper
Units shall be square with a formed backpan, flat shall be provided. Damper shall consist of gang-operated
panel face, and a high induction inner high induction radial blades that slide perpendicular to air flow direction.
core assembly. The face panel of the outlet shall project The damper shall be adjusted from full open to full closed.
SQUARE CEILING DIFFUSERS
no more than 1/4" below the ceiling grid. The units Damper shall be adjusted with a screwdriver slot.
shall be the size and quantity as outlined in the plans
and specifications. OPPOSED BLADE DAMPER
Inlets shall be drawn into the backpan of the diffuser. METALAIRE model D3 aluminum or SD3 Steel round
Welded inlets are not acceptable. Diffusers shall include opposed blade type dampers shall be provided. Damper
seismic tabs drawn into the backpan. shall consist of gang operated blades that can be
adjusted from full open to full closed. Damper shall be
Face panel shall be held in place with hooks are secured adjusted with a screwdriver slot.
through the backpan and be removable without the aid of
tools. Units with face panels held in place with springs or EQUALIZING GRID
clips are not acceptable. METALAIRE model G3 aluminum round equalizing grid
Inner core assembly shall be steel and include a gasket shall be provided. Equalizing grid shall consist of 1/2"
between the core and the backpan. The high induction x 1/2" x 1/2" aluminum cubed core mounting in an
core assembly shall produce a four way discharge pattern aluminum frame.
PHENOMENATOR
Paint Specification
Process shall be anodic electro-deposition using an
anodic acrylic paint. Units shall undergo pre-treatment
including a pressurized spray stage using an alkaline
cleaner and a de-ionized water rinse.
CD24 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
PHENOMENATOR MODEL NUMBER SPECIFICATION
SQUARE FACE DIFFUSER PLAQUE FACE HIGH PERFORMANCE
Model Neck Size Module Available Finishes
Phenom-1 Surface Mount - Steel 6 Standard Finish
Phenom-1 AS Surface Mount - Aluminized Steel 8 01 White
DIFFUSERS
Phenom-1 AL Surface Mount - Aluminum 10 Optional Finishes
CEILING
24 x 24
12 02 Satin Silver
14 03 Black
15 28 Custom Color
Available Accessories
G3 Equalizing Grid
BDS Butterfly Damper
PHENOMENATOR
24 x 24
Phenom-7 Concealed Spline - Steel 12 02 Satin Silver
Phenom-7 AS Concealed Spline - Aluminized Steel 14 03 Black
Phenom-9 Donn Fineline / Bolt Slot - Steel 15 28 Custom Color
Phenom-9 AS Donn Fineline / Bolt Slot - Aluminized Steel
Available Accessories
G3 Equalizing Grid
BDS Butterfly Damper
SQUARE CEILING DIFFUSERS
14 03 Black
15 28 Custom Color
Available Accessories
G3 Equalizing Grid
BDS Butterfly Damper
RSD Radial Damper
BO-1 3-Way Blank Off
BO-2 2-Way Blank Off
BO-3 1-Way Blank Off
TBPF T-Bar Plaster Frame
CD26 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES PHENOMENATOR PERFORMANCE DATA
MODEL PHENOMENATOR
fpm Vn 400 500 600 700 800 900 1000 1200
Nominal
Neck Size Pv 0.01 0.016 0.022 0.031 0.04 0.05 0.062 0.09
CFM - - 120 135 155 175 195 215
DIFFUSERS
Ps - - .020 .026 .034 .044 .054 .066
CEILING
Pt - - .042 .057 .074 .094 .116 .141
6
Throw* - - 1-1-2 1-2-3 2-2-4 2-3-5 3-4-6 3-5-7
Throw - - 1-1-1 1-1-2 1-1-3 1-2-4 2-3-5 3-4-6
NC - - <20 20 21 24 26 29
CFM 140 175 210 245 280 315 350 385
Ps .020 .031 .045 .061 .080 .101 .125 .152
Pt .030 .047 .067 .092 .114 .151 .187 .218
8
PHENOMENATOR
Throw 3-6-10 6-9-12 7-10-13 9-11-14 11-14-16 12-15-18 13-17-20 15-19-22
NC 22 27 32 36 40 43 46 52
CFM 430 535 640 750 860 975 1095 1220
Ps .089 .138 .166 .271 .284 .293 .306 .336
Pt .099 .154 .188 .297 .318 .343 .360 .441
14
Throw* 9-10-13 11-14-15 13-15-18 14-17-21 16-19-23 17-21-25 19-23-27 23-26-29
Throw 6-7-11 7-11-13 11-14-15 12-15-17 16-18-20 18-20-22 20-22-24 21-23-26
NC 30 35 40 44 50 56 62 68
CFM 490 615 735 875 1020 1165 - -
Ps .112 .177 .253 .337 .355 .364 - -
Pt .122 .193 .275 .368 .395 .414 - -
15
Throw* 10-12-14 13-15-17 13-16-20 16-19-22 19-21-25 21-23-27 - -
Throw 8-10-12 10-12-14 11-14-17 12-16-19 15-19-22 17-21-23 - -
NC 33 39 44 50 56 62 - -
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
fpm Velocity of air stream in Feet per Minute
Pv Velocity pressure (inches of water column)
DIFFUSERS
CD28 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
LOUVERED FACE DIFFUSERS
MODEL 5000 MODEL L-5000
DIFFUSERS
CEILING
MODELS 5500 AND 5500S MODEL 5200 MODEL 5500DD MODEL 9000
Model 9000 is a modular adjustable air diffuser engineered for supply air
distribution. It is designed for ceiling installation and can be adjusted quickly PAGE 83
and easily by rearranging the air pattern cores.
CD30 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
DIFFUSERS
CEILING
LOUVERED FACE DIFFUSERS
5000
Frame Style IV Overall Diffuser Size Ceiling Opening Dimensions Bottom of Duct to Ceiling Line
-1 Neck Size + 5 1/4 Neck Size + 3 1/4 1 1/2
-2 Neck Size + 4 5/8 Neck Size + 1/2 1 3/16
-6 T-Bar Spacing - 1/4 T-Bar Module Size 1 11/16
-7 T-Bar Spacing - 1/16 T-Bar Module Size 1 11/16
-8 T-Bar Spacing 1/4 T-Bar Module Size 1 15/16
-9 T-Bar Grid Size 1/4 Ceiling Grid Size 1 1/16
CEILING
5000-46 Drop Face T-Bar Lay-in blades that allow the air pattern to be set from vertical
5000-6 T-bar Lay-in to horizontal (Optional APD Air Pattern Deflectors). Air
5000-7 Concealed Spline pattern deflector blades shall be accessible from the face
5000-8 Tegular Lay-in of the diffuser and adjustable without the use of tools.
5000-9 Donn Fineline IV INDUCTION VANES
Air Diffusers shall be aluminum model 5000 Units shall include IV induction vanes factory mounted
manufactured by METALAIRE. Units shall consist of onto the back side of the deflector vanes. IV vanes shall
a fixed pattern louvered core fastened into a border with increase the induction rate of the diffuser.
LOUVERED FACE DIFFUSERS
Paint Specification
Process shall be anodic electro-deposition using an
anodic acrylic paint. Units shall undergo pre-treatment
including a pressurized spray stage using an alkaline
cleaner and de-ionized water rinse.
CD32 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
5000 MODEL NUMBER SPECIFICATION
LOUVERED FACE CEILING DIFFUSER
Neck
Model 6 9 12 15 18 21 24 27 30 33 36 36 42 45 48
5000-1 Surface Mount - Extruded Aluminum 6 X
DIFFUSERS
5000-2 Beveled Drop Surface Mount - Extruded Aluminum 9 X X
CEILING
5000-4 5000-4 Drop Face Surface Mount - Extruded Aluminum 12 X X X
15 X X X X
18 X X X X X
21 X X X X X X
24 X X X X X X X
27 X X X X X X X X
30 X X X X X X X X X
5000
S3 Sq 3-Way G3 Round Equalizing Grid 24 Mill
SC Sq 2-Way corner BDS Butterfly Damper 28 Custom Color
R1S Rct 1-Way short RSD Radial Shutter Damper
R1L Rct 1-Way long
R2S Rct 2-Way short Available Options
R2L Rct 2-Way long IV Induction Vanes
R3S Rct 3-Way short APD Air Pattern Deflectors
R3L Rct 3-Way long FSM Facescrew Mount -1 only
R4 Rct 4-Way
9 X
CEILING
6 X
5000-6 T-bar Lay-in - Extruded Aluminum 9 X X
5000-7 Concealed Spline - Extruded Aluminum 12 X X X
24 x 24
5000-8 Tegular T-bar - Extruded Aluminum 15 X X X X
5000-9 Donn Fineline - Extruded Aluminum 18 X
21 X
6 X
9 X X
LOUVERED FACE DIFFUSERS
12 X X X
15 X X X X
18 X X X X
5000-6 T-bar Lay-in - Extruded Aluminum 36 x 24
21 X X X X
24 X X X X
27 X X X X
30 X
33 X
6 X
9 X X
12 X X X
15 X X X X
18 X X X X
21 X X X X
24 X X X X
5000
CD34 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
5000 MODEL NUMBER SPECIFICATION
LOUVERED FACE CEILING DIFFUSER
Air Pattern Available Accessories Available Finishes
Standard D5 Steel Opposed Blade Damper Standard
S4 Sq 4-Way D5A Aluminum Opposed Blade Damper 01 White
DIFFUSERS
Optional L9 Square / Rectangular Equalizing Grid Optional
CEILING
S1 Sq 1-Way TR Square to Round Transition 02 Satin Silver
S2 Sq 2-Way TR Deep (Used with Damper) Deep Square to Round Transition 03 Black
S3 Sq 3-Way G3 Round Equalizing Grid 24 Mill
SC Sq 2-Way corner BDS Butterfly Damper 28 Custom Color
R1S Rct 1-Way short RSD Radial Shutter Damper
R1L Rct 1-Way long
R2S Rct 2-Way short Available Options
5000
NC - - - 21 26 31
Total CFM 200 300 400 500 600 700
CFM/Side 50 75 100 125 150 175
12 x 12
Throw 3-7 6-10 9-14 11-16 13-18 15-20
NC - - - 24 29 34
Total CFM 313 469 625 781 938 1094
CFM/Side 78 117 156 195 234 273
15 x 15
Throw 4-8 7-12 10-15 12-18 15-20 17-22
NC - - 21 26 31 36
Total CFM 450 675 900 1125 1350 1575
CFM/Side 113 169 225 281 338 394
18 x 18
Throw 5-10 8-14 11-17 14-20 16-22 18-23
5000
NC - - 22 27 32 37
Total CFM 613 919 1225 1531 1837 2144
CFM/Side 153 230 306 383 459 536
21 x 21
Throw 6-12 9-16 12-19 15-21 17-23 19-25
NC - - 23 28 33 38
Total CFM 800 1200 1600 2000 2400 2800
CFM/Side 200 300 400 5000 600 700
24 x 24
Throw 7-14 10-17 12-20 16-23 18-25 21-27
NC - - 24 29 34 39
Total CFM 1013 1519 2025 2531 3037 3544
CFM/Side 253 380 506 633 759 886
27 x 27
Throw 7-15 11-19 14-22 17-25 20-27 22-28
NC - 20 25 30 35 4
Total CFM 1513 2269 3025 3781 4537 5294
CFM/Side 378 567 756 945 1134 1323
33 x 33
Throw 9-18 13-22 16-25 19-27 22-30 24-31
NC - 21 26 31 36 41
CD36 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 5000 PERFORMANCE DATA/4-WAY RECTANGULAR PATTERN (R4)
MODEL 5000
Neck Velocity
200 300 400 500 600 700
Ps .006 .013 .022 .035 .050 .068
DIFFUSERS
Pt .008 .018 .032 .050 .072 .099
CEILING
Neck
Size Side Designation A B A B A B A B A B A B
Total CFM 75 113 150 185 225 263
CFM/Side 13 25 19 38 25 50 31 63 38 75 43 86
6x9
Throw 2-4 2-5 4-8 5-9 7-11 8-12 9-13 10-14 11-16 12-17 13-17 14-18
NC - - - - - -
Total CFM 100 150 200 250 300 350
CFM/Side 13 38 19 56 25 75 31 94 38 113 44 131
6 x 12
Throw 3-5 3-7 5-9 6-10 8-12 9-13 10-15 11-16 12-17 13-18 14-18 15-20
NC - - - 22 27 32
Total CFM 188 281 375 469 563 656
CFM/Side 28 66 42 98 56 131 70 164 84 197 98 230
9 x 15
Throw 3-5 4-8 5-9 7-11 8-12 9-14 10-15 12-17 12-17 14-19 14-18 16-21
NC - - - 23 28 33
-
Total CFM 225 338 450 563 675 788
CFM/Side 28 84 42 127 56 169 70 211 84 253 98 295
9 x 18
5000
Throw 3-5 4-9 5-9 7-12 8-12 10-16 10-15 13-18 12-17 15-20 14-18 17-22
NC - - - 24 29 34
Total CFM 263 394 525 656 788 919
CFM/Side 28 103 42 155 56 206 70 258 84 309 98 361
9 x 21
Throw 3-5 5-10 5-9 8-13 8-12 11-17 10-15 13-19 12-17 16-21 14-18 18-23
NC - - 20 25 30 35
Total CFM 250 375 500 625 750 875
CFM/Side 50 75 75 113 100 150 125 188 150 225 175 263
12 x 15
Throw 3-7 4-8 6-10 7-12 9-14 10-15 11-16 12-18 13-18 14-20 15-20 16-21
NC - - 20 25 30 35
Total CFM 300 450 600 750 900 1050
CFM/Side 50 100 75 150 100 200 125 250 150 300 175 350
12 x 18
Throw 3-7 5-10 6-10 8-13 9-14 11-16 11-16 13-19 13-18 15-21 15-20 17-23
NC - - 20 25 30 35
Total CFM 350 525 700 875 1050 1225
CFM/Side 50 125 75 188 100 250 125 313 150 375 175 438
12 x 21
Throw 3-7 5-11 6-10 8-14 9-14 11-18 11-16 14-20 13-18 16-22 15-20 18-24
NC - - 21 26 31 36
Neck
Size Side Designation A B A B A B A B A B A B
Total CFM 400 600 800 1000 1200 1400
CFM/Side 50 150 75 225 100 300 125 375 150 450 175 525
12 x 24
Throw 3-7 6-12 6-10 9-15 9-14 12-19 11-16 15-21 13-18 17-23 15-20 1-25
NC - - 22 27 32 37
Total CFM 375 563 750 938 1125 1313
CFM/Side 78 109 117 164 156 219 195 273 234 328 273 383
15 x 18
LOUVERED FACE DIFFUSERS
Throw 4-8 5-10 7-12 8-14 10-15 11-17 12-18 14-19 15-20 16-22 17-22 18-23
NC - - 21 26 31 36
Total CFM 500 750 1000 1250 1500 1750
CFM/Side 78 172 117 258 156 344 195 430 234 516 273 602
15 x 24
Throw 4-8 6-13 7-12 9-16 10-15 13-19 12-18 15-22 15-20 18-24 17-22 20-26
NC - - 22 27 32 37
Total CFM 600 900 1200 1500 1800 2100
CFM/Side 113 188 160 281 225 375 281 469 338 563 394 656
18 x 24
Throw 5-10 6-13 8-14 10-17 11-17 13-20 14-20 16-23 16-22 18-25 18-23 20-26
NC - - 23 28 33 38
Total CFM 963 1444 1925 2406 2888 3369
CFM/Side 153 328 230 492 306 656 383 820 459 984 536 1148
21 x 33
5000
Throw 6-12 8-17 9-16 12-21 12-19 15-24 15-21 18-26 17-23 21-29 19-25 23-30
NC - 20 25 30 35 40
Total CFM 1000 1500 2000 2500 3000 3500
CFM/Side 200 300 300 1500 400 600 500 750 600 900 700 1050
24 x 30
Throw 7-14 8-16 10-17 12-20 13-20 15-23 16-23 18-26 18-25 21-28 21-27 23-30
NC - 20 25 30 35 40
CD38 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 5000 PERFORMANCE DATA/3-WAY SQUARE PATTERN (S3)
MODEL 5000
Neck Velocity
200 300 400 500 600 700
Ps 0.006 0.013 0.022 0.035 0.05 0.068
DIFFUSERS
Neck Size Pt 0.008 0.018 0.032 0.05 0.072 0.099
CEILING
Total CFM 50 75 100 125 150 175
CFM/Side 13 19 25 31 38 44
6x6
Throw 2-4 4-8 7-11 9-13 11-16 13-17
NC - - - - 20 25
Total CFM 113 169 225 281 335 394
CFM/Side 28 42 56 70 84 98
9x9
Throw 3-5 5-9 8-12 10-15 12-17 14-18
5000
NC - - 22 27 32 37
Total CFM 613 919 1225 1531 1837 2144
CFM/Side 153 230 306 383 459 536
21 x 21
Throw 6-12 9-16 12-19 15-21 17-23 19-25
NC - - 23 28 33 38
Total CFM 800 1200 1600 2000 2400 2800
CFM/Side 200 300 400 5000 600 700
24 x 24
Throw 7-14 10-17 12-20 16-23 18-25 21-27
NC - - 24 29 34 39
Total CFM 1013 1519 2025 2531 3037 3544
CFM/Side 253 380 506 633 759 886
27 x 27
Throw 7-15 11-19 14-22 17-25 20-27 22-28
NC - 20 25 30 35 4
Throw 3-6 3-6 7-12 7-11 11-18 11-17 16-23 16-23 21-29 20-28 24-32 24-34
NC - - - 21 26 31
Total CFM 100 150 200 250 300 350
CFM/Side 50 25 75 38 100 50 125 63 150 75 175 88
6 x 12
Throw 5-9 3-6 8-15 7-12 13-20 11-17 18-26 16-23 22-31 20-28 26-37 24-34
NC - - - 23 28 33
LOUVERED FACE DIFFUSERS
Throw 5-9 5-9 8-15 8-15 13-20 13-20 18-26 18-26 22-31 22-31 26-37 26-37
NC - - 20 25 30 35
Total CFM 188 281 375 469 563 656
CFM/Side 78 55 117 82 156 109 195 137 234 164 273 191
9 x 15
Throw 4-8 3-7 7-12 6-11 10-15 9-14 12-18 11-16 15-20 14-19 17-22 15-20
NC 20 20 20 23 28 33
Total CFM 250 375 500 625 750 875
12 x 15
CFM/Side 78 86 117 129 156 172 195 215 234 258 273 301
Throw 4-8 4-9 7-12 7-12 10-15 10-16 12-18 13-18 15-20 15-20 17-22 17-22
NC 20 20 20 25 30 35
Total CFM 300 450 600 750 900 1050
12 x 18
CFM/Side 113 94 169 141 225 188 281 234 338 281 394 328
Throw 5-10 4-9 8-14 7-13 11-17 10-16 14-20 13-19 16-22 15-21 18-23 17-22
5000
NC 20 20 20 25 30 35
Total CFM 375 563 750 938 1125 1313
15 x 18
CFM/Side 113 131 169 197 225 263 281 238 338 394 394 459
Throw 5-10 5-11 8-14 8-15 11-17 12-18 14-20 14-20 16-22 17-23 18-23 19-24
NC 20 20 21 26 31 36
Total CFM 438 656 875 1094 1313 1531
15 x 21
CFM/Side 153 142 230 213 306 284 383 355 459 427 536 498
Throw 6-12 5-11 9-16 9-15 12-19 12-18 15-21 15-21 17-23 17-23 19-25 19-25
NC 20 20 22 27 32 37
Total CFM 600 900 1200 1500 1800 2100
18 x 24
CFM/Side 200 200 300 300 400 400 500 500 600 600 700 700
Throw 7-14 7-14 10-17 10-17 13-20 13-20 16-23 16-23 18-25 18-25 21-27 21-27
NC 20 20 23 28 33 38
Total CFM 788 1181 1575 1969 2362 2756
21 x 27
CFM/Side 253 267 380 401 506 534 633 668 759 802 886 935
Throw 7-15 7-15 11-19 11-19 14-22 15-22 17-25 17-25 20-27 20-27 22-28 22-29
NC 20 20 24 29 34 39
Total CFM 1000 1500 2000 2500 3000 3500
24 x 30
CFM/Side 313 344 469 516 625 688 781 859 938 1031 1094 1203
Throw 8-17 8-17 12-20 12-11 15-23 1624 18-26 19-27 21-28 21-29 23-30 23-31
NC 20 20 25 30 35 40
CD40 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 5000 PERFORMANCE DATA/3-WAY RECTANGULAR PATTERN (R3L)
MODEL 5000
Neck Velocity
200 300 400 500 600 700
Ps .006 .013 .022 .035 .050 .068
DIFFUSERS
Pt .008 .018 .032 .050 .072 .099
CEILING
Neck
Size Side Designation A B A B A B A B A B A B
Total CFM 75 113 150 185 225 263
CFM/Side 13 25 19 38 25 50 31 63 38 75 43 86
6x9
Throw 2-4 2-5 4-8 5-9 7-11 8-12 9-13 10-14 11-16 12-17 13-17 14-18
NC - - - - - -
Total CFM 100 150 200 250 300 350
CFM/Side 13 38 19 56 25 75 31 94 38 113 44 131
6 x 12
Throw 3-5 3-7 5-9 6-10 8-12 9-13 10-15 11-16 12-17 13-18 14-18 15-20
NC - - - 22 27 32
Total CFM 188 281 375 469 563 656
CFM/Side 28 66 42 98 56 131 70 164 84 197 98 230
9 x 15
Throw 3-5 4-8 5-9 7-11 8-12 9-14 10-15 12-17 12-17 14-19 14-18 16-21
NC - - - 23 28 33
Total CFM 225 338 450 563 675 788
CFM/Side 28 84 42 127 56 169 70 211 84 253 98 295
9 x 18
5000
Throw 3-5 - 4-9 5-9 7-12 8-12 10-16 10-15 13-18 12-17 15-20 14-18 17-22
NC - - 24 29 34
Total CFM 263 394 525 656 788 919
CFM/Side 28 103 42 155 56 206 70 258 84 309 98 361
9 x 21
Throw 3-5 5-10 5-9 8-13 8-12 11-17 10-15 13-19 12-17 16-21 14-18 18-23
NC - - 20 25 30 35
Total CFM 250 375 500 625 750 875
CFM/Side 50 75 75 113 100 150 125 188 150 225 175 263
12 x 15
Throw 3-7 4-8 6-10 7-12 9-14 10-15 11-16 12-18 13-18 14-20 15-20 16-21
NC - - 20 25 30 35
Neck
Size Side Designation A B A B A B A B A B A B
Total CFM 300 450 600 750 900 1050
CFM/Side 50 100 75 150 100 200 125 250 150 300 175 350
12 x 18
Throw 3-7 5-10 6-10 8-13 9-14 11-16 11-16 13-19 13-18 15-21 15-20 17-23
NC - - 20 25 30 35
Total CFM 375 563 750 938 1125 1313
CFM/Side 148 78 223 117 297 156 371 195 445 234 520 273
12 x 21
LOUVERED FACE DIFFUSERS
Throw 6-12 4-8 9-15 7-12 12-19 10-15 15-21 12-18 17-23 15-20 19-25 17-22
NC 20 20 21 26 31 36
Total CFM 438 656 875 1094 1313 1531
CFM/Side 180 78 270 117 359 156 449 195 539 234 629 273
12 x 24
Throw 6-13 4-8 10-17 7-12 13-20 10-15 16-22 12-18 18-27 16-22 20-26 17-22
NC 20 20 22 27 32 37
Total CFM 525 788 1050 1313 1575 1837
CFM/Side 206 113 309 169 413 225 516 281 619 338 722 394
15 x 18
Throw 7-14 5-10 10-17 8-14 13-21 11-17 16-23 14-20 19-25 16-22 21-27 18-23
NC 20 20 23 28 33 38
Total CFM 600 900 1200 1500 1800 2100
CFM/Side 244 113 366 169 488 225 609 281 731 338 853 394
15 x 24
5000
Throw 7-15 5-10 11-19 8-14 14-22 11-17 17-24 14-20 19-26 17-23 22-28 18-23
NC 20 20 23 28 33 38
Total CFM 788 1181 1575 1969 2362 2756
CFM/Side 317 153 476 230 634 306 793 383 952 459 1110 536
18 x 24
Throw 8-17 6-12 12-20 9-16 15-24 12-19 18-26 15-21 21-28 18-23 23-30 19-25
NC 20 20 24 29 34 39
CD42 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 5000 PERFORMANCE DATA/2-WAY SQUARE PATTERN (S2 SC)
MODEL 5000
Neck Velocity
200 300 400 500 600 700
Ps 0.006 0.013 0.022 0.035 0.05 0.068
DIFFUSERS
Neck Size Pt 0.008 0.018 0.032 0.05 0.072 0.099
CEILING
Total CFM 50 75 100 125 150 175
CFM/Side 25 38 50 63 75 88
6x6
Throw 2-5 5-9 8-12 10-14 12-17 14-18
NC 20 20 20 20 20 25
Total CFM 113 169 225 281 338 394
CFM/Side 56 84 113 141 169 197
9x9
Throw 3-7 6-11 9-14 12-17 14-19 16-20
5000
NC 20 20 22 27 32 37
Total CFM 613 919 1225 1531 1837 2144
CFM/Side 306 459 613 766 979 1072
21 x 21
Throw 8-17 12-20 15-23 18-26 21-28 23-30
NC 20 20 23 28 33 38
Total CFM 800 1200 1600 2000 2400 2800
CFM/Side 400 600 800 1000 1200 1400
24 x 24
Throw 9-18 13-22 16-25 19-28 22-30 24-30
NC 20 20 24 29 34 39
Total CFM 1013 1519 2025 2531 3037 3544
CFM/Side 506 759 1013 1266 1519 1772
27 x 27
Throw 10-20 14-24 17-27 21-29 23-32 25-33
NC 20 20 25 30 35 40
CD44 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 5000 PERFORMANCE DATA/
2-WAY RECTANGULAR PATTERN (R2L R2S)
MODEL 5000
Neck Velocity
200 300 400 500 600 700
DIFFUSERS
Ps 0.006 0.013 0.022 0.035 0.05 0.068
CEILING
Neck Size Pt 0.008 0.018 0.032 0.05 0.072 0.099
Total CFM 75 113 150 188 225 263
CFM/Side 38 56 75 94 113 131
6x9
Throw 3-6 6-10 8-13 11-15 13-17 15-19
NC 20 20 20 20 23 28
Total CFM 100 150 200 250 300 350
CFM/Side 50 75 100 125 150 175
6 x 12
5000
Throw 4-9 7-13 10-16 13-19 15-21 17-22
NC 20 20 20 23 28 33
Total CFM 225 338 450 563 675 788
CFM/Side 113 169 225 281 338 394
9 x 18
Throw 5-10 8-14 11-17 14-20 16-22 18-23
NC 20 20 20 24 29 34
Total CFM 263 394 525 656 788 919
CFM/Side 131 197 263 328 394 459
9 x 21
Throw 5-11 8-15 12-18 14-20 17-23 19-24
NC 20 20 20 25 30 35
Total CFM 250 375 500 625 750 875
CFM/Side 125 188 250 313 375 438
12 x 15
Throw 5-11 8-14 11-18 14-20 16-22 18-24
NC 20 20 20 25 30 35
12 x 21
Throw 6-13 9-16 13-20 15-22 18-24 20-26
NC 20 20 21 26 31 36
Total CFM 438 656 875 1094 1313 1531
CFM/Side 219 328 438 547 656 766
15 x 21
Throw 7-14 10-18 14-21 16-24 19-26 21-27
NC 20 20 22 27 32 37
Total CFM 500 750 1000 1250 1500 1750
CFM/Side 250 375 500 625 750 875
15 x 24
Throw 7-15 11-19 14-22 17-25 20-27 22-28
NC 20 20 22 27 32 37
Total CFM 525 788 1050 1313 1575 1837
CFM/Side 263 394 525 656 788 919
18 x 21
5000
CD46 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 5000 PERFORMANCE DATA/
1-WAY RECTANGULAR PATTERN (R1L R1S)
MODEL 5000
Neck Velocity
200 300 400 500 600 700
DIFFUSERS
Ps 0.006 0.013 0.022 0.035 0.05 0.068
CEILING
Neck Size Pt 0.008 0.018 0.032 0.05 0.072 0.099
Total CFM 75 113 150 188 225 263
6x9 Throw 4-8 7-12 10-15 12-18 14-20 16-21
NC 20 20 20 20 23 28
Total CFM 100 150 200 250 300 350
6 x 12 Throw 5-10 8-13 11-16 13-19 15-21 17-23
NC 20 20 20 20 25 30
Total CFM 125 188 250 313 375 438
6 x 15 Throw 5-11 8-14 11-18 14-20 16-22 18-24
5000
NC 20 20 20 25 30 35
Total CFM 300 450 600 750 900 1050
12 x 18 Throw 8-16 12-20 15-23 18-26 21-28 23-30
NC 20 20 20 25 30 35
Total CFM 438 656 875 1094 1313 1531
15 x 21 Throw 9-19 13-23 17-26 20-28 22-31 25-32
NC 20 20 22 27 32 37
Total CFM 500 750 1000 1250 1500 1750
15 x 24 Throw 10-20 14-24 17-27 20-29 23-31 25-33
NC 20 20 22 27 32 37
Total CFM 525 788 1050 1313 1575 1837
18 x 21 Throw 10-20 14-24 18-27 21-30 23-32 26-34
NC 20 20 23 28 33 38
Total CFM 600 900 1200 1500 1800 2100
18 x 24 Throw 10-21 14-25 18-28 21-31 24-33 26-34
NC 20 20 23 28 33 38
Total CFM 788 1181 1575 1969 2362 2756
21 x 27 Throw 11-23 15-26 19-30 23-32 25-34 28-36
NC 20 20 24 29 34 39
DEFINITION OF UNITS
CFM Cubic Feet Per Minute (air)
Horizontal Throw Throw distance in feet at terminal velocities of 150fpm, 100fpm and 50fpm
NC noise criteria, sound pressure level. NC ratings are based on sound power level
DIFFUSERS
(Lw) Re 10-12 watts minus a 10dB room attenuation in all octave bands
CEILING
CD48 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
MODEL L-5000
Model L-5000 is a fixed pattern, high induction architectural linear louver diffuser. The diffuser
is aluminum construction and is available with either 1-way or 2-way air discharge patterns.
Surface Mount units are available in lengths
DIFFUSERS
from 18" to 48" in 3" increments. T-bar Lay-in
CEILING
units are available in lengths of 18", 30" or 42"
1-way units are available in 3", 6", 9" and
12" widths
2-way units are available in 6" and 12" widths
The louvered face is secured with spring clips
* Dimention indicates the distance needed for Clearance from bottom of the duct to the ceiling line and must be maintained for proper fit
CEILING
manufactured by METALAIRE. Units shall consist of a blades that allow the air pattern to be set from vertical
fixed-pattern louvered core fastened into a border with to horizontal (Optional APD Air Pattern Deflectors). Air
spring loaded latches. Core shall be removable without pattern deflector blades shall be accessible from the face
the use of tools. Diffusers shall be engineered for high and the diffuser and adjustable without the use of tools.
capacity applications and include straight deflector
blades (without a horizontal lip). Units with a horizontal IV INDUCTION VANES
lip at the ends of the deflector blades are not acceptable. Units shall include IV induction vanes factory mounted
The units shall be the size and quantity as outlined in onto the back side of the deflector vanes. IV vanes shall
the plans and specifications. increase the induction rate of the diffuser.
LOUVERED FACE DIFFUSERS
Performance Specification
The manufacturer shall provide published performance
data. Data shall be tested in accordance to ANSI/
ASHRAE Standard 70-2006.
L-5000
Paint Specification
Process shall be anodic electro-deposition using an
anodic acrylic paint. Units shall undergo pre-treatment
including a pressurized spray stage using an alkaline
cleaner and a de-ionized water rinse.
CD50 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
5000 MODEL NUMBER SPECIFICATION
LOUVERED FACE CEILING DIFFUSER
Neck
Model 18 21 24 27 30 33 36 39 42 45 48
L5000-1 Surface Mount - Extruded Alumnum 3 X X X X X X X X X X X
DIFFUSERS
6 X X X X X X X X X X X
CEILING
9 X X X X X X X X X X X
12 X X X X X X X X X X X
L-5000
6 X X
9 X X X
12 X X X X
CD52 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 5000 PERFORMANCE DATA/1-WAY RECTANGULAR PATTERN (R1L)
MODEL L5000
Neck Velocity
200 300 400 500 600 700
Ps 0.006 0.013 0.022 0.035 0.05 0.068
DIFFUSERS
Neck Size Pt 0.008 0.018 0.032 0.05 0.072 0.099
CEILING
Total CFM 250 375 500 625 750 875
30 x 6 Throw 8-12 12-17 16-23 19-26 22-29 25-32
NC 20 20 20 23 29 34
Total CFM 275 413 550 688 825 963
33 x 6 Throw 8-12 12-18 16-24 20-27 24-31 26-33
NC 20 20 20 23 30 35
Total CFM 300 450 600 750 900 1050
36 x 6 Throw 9-13 13-19 17-24 21-28 24-31 27-34
NC 20 20 20 23 30 35
L-5000
21 x 9 Throw 8-12 11-18 15-22 18-25 22-29 24-31
NC 20 20 20 24 29 34
Total CFM 300 450 600 750 900 1050
24 x 9 Throw 8-12 12-18 16-23 20-27 24-31 26-33
NC 20 20 20 25 30 35
Total CFM 338 506 675 844 1013 1181
27 x 9 Throw 9-13 13-19 17-24 21-28 25-32 28-35
NC 20 20 22 25 31 36
Total CFM 375 563 750 938 1125 1313
30 x 9 Throw 9-13 14-20 18-26 22-29 27-34 29-36
NC 20 20 22 25 31 36
Total CFM 413 619 825 1031 1238 1444
33 x 9 Throw 9-14 14-21 19-27 24-31 28-35 31-38
NC 20 20 22 25 31 36
Total CFM 450 675 900 1125 1350 1575
36 x 9 Throw 10-15 15-22 20-28 25-32 30-37 32-39
NC 20 20 23 27 32 37
Total CFM 488 731 975 1219 1463 1706
39 x 9 Throw 10-15 15-23 20-28 26-33 31-38 34-41
NC 20 20 23 27 32 37
CD54 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 5000 PERFORMANCE DATA/2-WAY RECTANGULAR PATTERN (R2L)
MODEL L5000
Neck Velocity
200 300 400 500 600 700
Ps 0.006 0.013 0.022 0.035 0.05 0.068
DIFFUSERS
Neck Size Pt 0.008 0.018 0.032 0.05 0.072 0.099
CEILING
Total CFM 75 113 150 188 225 263
CFM/Side 38 56 75 94 113 131
18 x 3
Throw 3-5 5-8 7-10 8-12 10-15 12-18
NC 20 20 20 20 24 29
Total CFM 88 131 175 219 263 306
CFM/Side 44 66 88 109 131 153
21 x 3
Throw 3-6 5-8 7-11 9-13 11-16 12-19
NC 20 20 20 20 24 29
L-5000
NC 20 20 20 22 26 31
Total CFM 150 225 300 375 450 525
CFM/Side 75 113 150 188 225 263
36 x 3
Throw 5-7 7-11 9-14 12-18 14-21 16-24
NC 20 20 20 23 27 32
Total CFM 163 244 325 406 488 569
CFM/Side 81 122 163 203 244 284
39 x 3
Throw 5-7 7-11 10-15 12-18 15-22 17-25
NC 20 20 20 23 27 32
Total CFM 175 263 350 438 525 613
CFM/Side 88 131 175 219 263 306
42 x 3
Throw 5-8 8-11 10-15 13-19 15-23 18-26
NC 20 20 20 23 27 32
Total CFM 188 281 375 469 563 656
CFM/Side 94 141 188 234 281 328
45 x 3
Throw 5-8 8-12 10-16 13-20 16-24 18-27
NC 20 20 21 24 28 33
Total CFM 200 300 400 500 600 700
CFM/Side 100 150 200 250 300 350
48 x 3
Throw 6-8 8-12 11-16 13-20 16-24 19-28
NC 20 20 21 24 28 33
NC 20 20 21 24 29 34
Total CFM 300 450 600 750 900 1050
CFM/Side 150 225 300 375 450 525
36 x 6
Throw 7-10 10-16 14-21 17-26 21-28 24-30
NC 20 20 22 25 30 35
Total CFM 325 488 650 813 975 1138
CFM/Side 163 244 325 406 488 569
39 x 6
Throw 7-11 11-16 15-22 18-27 22-29 25-32
NC 20 20 22 25 30 35
Total CFM 350 525 700 875 1050 1225
CFM/Side 175 263 350 438 525 613
42 x 6
Throw 8-11 11-17 15-23 19-28 23-30 26-34
NC 20 20 22 25 30 35
Total CFM 375 563 750 938 1125 1313
CFM/Side 188 281 375 469 563 656
45 x 6
Throw 8-12 12-18 16-23 20-29 23-32 27-35
NC 20 20 23 26 31 36
Total CFM 400 600 800 1000 1200 1400
CFM/Side 200 300 400 500 600 700
48 x 6
Throw 8-12 12-18 16-24 20-30 24-33 28-37
NC 20 20 23 26 31 36
CD56 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 5000 PERFORMANCE DATA/2-WAY RECTANGULAR PATTERN (R2L)
MODEL L5000
Neck Velocity
200 300 400 500 600 700
Ps 0.006 0.013 0.022 0.035 0.05 0.068
DIFFUSERS
Neck Size Pt 0.008 0.018 0.032 0.05 0.072 0.099
CEILING
Total CFM 225 338 450 563 675 788
CFM/Side 113 169 225 281 338 394
18 x 9
Throw 5-10 8-14 11-17 14-20 16-22 18-23
NC 20 20 20 24 29 34
Total CFM 263 394 525 656 788 919
CFM/Side 131 197 263 328 394 459
21 x 9
Throw 5-11 8-15 12-18 14-20 17-23 19-24
NC 20 20 20 25 30 35
L-5000
NC 20 20 22 26 31 36
Total CFM 450 675 900 1125 1350 1575
CFM/Side 225 338 450 563 675 788
36 x 9
Throw 9-12 12-18 16-24 20-28 24-30 27-32
NC 20 20 23 27 32 37
Total CFM 488 731 975 1219 1463 1706
CFM/Side 244 366 488 609 731 853
39 x 9
Throw 8-13 12-18 16-25 20-28 25-31 28-34
NC 20 20 23 27 32 37
Total CFM 525 788 1050 1313 1575 1838
CFM/Side 263 394 525 656 788 919
42 x 9
Throw 8-13 13-19 17-25 21-29 25-32 30-36
NC 20 20 24 28 33 38
Total CFM 563 844 1125 1406 1688 1969
CFM/Side 281 422 563 703 844 984
45 x 9
Throw 9-13 13-20 18-26 22-30 26-34 30-37
NC 20 20 24 28 33 38
Total CFM 600 900 1200 1500 1800 2100
CFM/Side 300 450 600 750 900 1050
48 x 9
Throw 9-14 14-20 18-27 22-32 27-35 31-38
NC 20 20 24 28 33 38
NC 20 20 23 28 33 38
Total CFM 600 900 1200 1500 1800 2100
CFM/Side 300 450 600 750 900 1050
36 x 12
Throw 8-14 13-19 17-25 21-27 25-30 28-34
NC 20 20 23 28 33 38
Total CFM 650 975 1300 1625 1950 2275
CFM/Side 325 488 650 813 975 1138
39 x 12
Throw 9-15 13-20 18-26 22-28 26-31 30-35
NC 20 20 23 28 33 38
Total CFM 700 1050 1400 1750 2100 2450
CFM/Side 350 525 700 875 1050 1225
42 x 12
Throw 9-15 14-21 18-27 23-29 27-32 31-36
NC 20 21 24 29 34 39
Total CFM 750 1125 1500 1875 2250 2625
CFM/Side 375 563 750 938 1125 1313
45 x 12
Throw 9-15 14-21 19-28 24-30 28-33 32-38
NC 20 21 24 29 34 39
Total CFM 800 1200 1600 2000 2400 2800
CFM/Side 400 600 800 1000 1200 1400
48 x 12
Throw 10-16 15-22 20-29 24-30 29-34 33-39
NC 20 21 24 29 34 39
CD58 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
MODEL 5500/5500S
The horizontal lip deflection design makes this diffuser excellent for
high capacity applications. The high induction feature ensures draft-free
conditions in low ceiling height applications.
Submittal: 5500
DIFFUSERS
Horizontal lip for rapid mixing of room and primary air
CEILING
23
8
3 1 1
16 1 4 1 2
Model: 5500-4 (Deep Drop Surface Mounting) Model: 5500-46 Lay in T-Bar
Overall Diffuser = Listed size + 5 7
(Deep Drop Surface Mounting)
8
Ceiling Opening =
1
Overall Diffuser = Module - 4
Listed Size + 21
5000/5500S
1 1
Neck Size = Listed Size - 8
Neck Size = Listed Size - 8
Ceiling 1
1
12 12 T-bar
Line
13 * 1 1
22
22
16
11 * 11 *
1 16
1 16
2 2
3 1 1 1
DIFFUSERS
7 7
9 22 8 x 22 8 Overall Face
Face Size A = Listed Size + 5 16
Face Size A = Overall Diffuser = T-Bar Spacing - 1
4
T-Bar Module = 24 x 24
Model: 5500S-2 ( V-Beveled Drop Surface Mount )
11
(Maximum 15 x 15)
LOUVERED FACE DIFFUSERS
CD60 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
DIFFUSERS
CEILING
LOUVERED FACE DIFFUSERS
Submittal: 5500S
Options For Square / Rectangular Louver Ceiling Diffusers
Steel
Option: Round Neck
D5 Steel Opposed Blade Damper
D5A Aluminum Opposed Blade Damper
APD Air Pattern Deflector
IV Induction Vanes
3 5
16 Option: APD Air Pattern Deflector
Face Size A*
Options: D5 Steel Opposed Blade Damper. Optional APD Air Pattern Deflector
D5A Aluminum Opposed Blade Damper
Optional D5 or D5A
Duct Size - 58 Option: IV Induction Vanes
Opposed Blade Damper
5000/5500S
3 38
1 1
14 12 IV Induction Vane
Damper Operator
CD62 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
5500 MODEL NUMBER SPECIFICATION
LOUVERED FACE CEILING DIFFUSER
Neck
Model 6 9 12 15 18 21 24 27 30 33 36 36 42 45 48
5500-1 Surface Mount - Aluminum 6 X
DIFFUSERS
5500-2 Beveled Drop Surface Mount - Aluminum 9 X X
CEILING
12 X X X
15 X X X X
18 X X X X X
21 X X X X X X
24 X X X X X X X
27 X X X X X X X X
30 X X X X X X X X X
5000/5500S
S2 Sq 2-Way TR Deep (Used with Damper) Deep Square to Round Transition 03 Black
S3 Sq 3-Way G3 Round Equalizing Grid 24 Mill
SC Sq 2-Way corner BDS Butterfly Damper 28 Custom Color
R1S Rct 1-Way short RSD Radial Shutter Damper
R1L Rct 1-Way long
R2S Rct 2-Way short Available Options
R2L Rct 2-Way long IV Induction Vanes
R3S Rct 3-Way short APD Air Pattern Deflectors
R3L Rct 3-Way long FSM Face Screw Mount -1 only
R4 Rct 4-Way
12 x 12
5500-6 T-bar Lay-in - Aluminum
DIFFUSERS
9 X
CEILING
6 X
5500-6 T-bar Lay-in - Aluminum 9 X X
5500-7 Concealed Spline - Aluminum 12 X X X
24 x 24
5500-8 Tegular T-bar - Aluminum 15 X X X X
5500-9 Donn Fineline / Bolt Slot - Aluminum 18 X
21 X
6 X
9 X X
12 X X X
LOUVERED FACE DIFFUSERS
15 X X X X
18 X X X X
36 x 24
30 X X X X
33 X X X X
36 X X X X
39 X X X X
42 X
45 X
6 X
9 X X
12 X X X
15 X X X X
18 X X X X X
21 X X X X X X
24 X X X X X X X
48 x 48
CD64 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
5500 MODEL NUMBER SPECIFICATION
LOUVERED FACE CEILING DIFFUSER
Air Pattern Available Accessories Available Finishes
Standard D5 Steel Opposed Blade Damper Standard
S4 Sq 4-Way D5A Aluminum Opposed Blade Damper 01 White
DIFFUSERS
Optional L9 Square / Rectangular Equalizing Grid Optional
CEILING
S1 Sq 1-Way FGBP (24 x 24 Only) Factory installed R6 insulation 02 Satin Silver
S2 Sq 2-Way TR Square to Round Transition 03 Black
S3 Sq 3-Way TR Deep (Used with Damper) Deep Square to Round Transition 24 Mill
SC Sq 2-Way corner G3 Round Equalizing Grid 28 Custom Color
R1S Rct 1-Way short BDS Butterfly Damper
R1L Rct 1-Way long RSD Radial Shutter Damper
R2S Rct 2-Way short
5000/5500S
12 X X X
15 X X X X
18 X X X X X
21 X X X X X X
24 X X X X X X X
CD66 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
5500S MODEL NUMBER SPECIFICATION
LOUVERED FACE CEILING DIFFUSER
Neck
Model Panel 6 9 12 15 18 21
5500S-6 T-bar Lay-in - Steel 6 X
DIFFUSERS
5500S-8 Tegular T-bar - Steel 9 X X
CEILING
5500S-9 Donn Fineline / Bolt Slot - Steel 12 X X X
24 x 24
15 X X X X
18 X
21 X
5000/5500S
CD68 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 5500 PERFORMANCE DATA/2-WAY SQUARE PATTERN (S2 SC)
MODEL 5500/5500S
Neck Velocity
200 300 400 500 600 700
Ps 0.006 0.013 0.022 0.035 0.05 0.068
DIFFUSERS
Neck Size Pt 0.008 0.018 0.032 0.05 0.072 0.099
CEILING
Total CFM 50 75 100 125 150 175
CFM/Side 25 38 50 63 75 88
6x6
Throw 3-6 7-2 11-17 16-23 20-28 24-34
NC - - - - 23 28
Total CFM 113 169 225 281 338 394
CFM/Side 56 84 113 141 169 197
9x9
Throw 5-10 9-15 13-21 18-27 23-32 27-38
5000/5500S
NC - 20 25 30 35 40
Total CFM 613 919 1225 1531 1837 2144
CFM/Side 306 459 613 766 919 1072
21 x 21
Throw 12-24 17-30 23-35 28-41 33-47 37-52
NC - 21 26 31 36 41
Total CFM 800 1200 1600 2000 2400 2800
CFM/Side 400 600 800 1000 1200 1400
24 x 24
Throw 12-22 16-28 21-34 27-39 32-45 36-50
NC - 22 27 32 37 42
Total CFM 1013 1519 2025 2531 3037 3544
CFM/Side 506 759 1013 1206 1519 1772
27 x 27
Throw 8-15 12-21 17-27 22-32 27-38 31-43
NC - 23 28 33 38 43
Neck Side
Size Designation A B A B A B A B A B A B
Total CFM 50 75 100 125 150 175
CFM/Side 19 13 28 19 38 25 47 31 56 38 66 44
6x6
Throw 3-5 2-4 6-11 6-10 10-16 10-16 15-22 15-21 20-28 19-27 24-33 23-32
NC - - - - 23 28
Total CFM 113 169 225 281 338 394
CFM/Side 42 28 63 42 84 56 105 70 127 84 148 98
9x9
LOUVERED FACE DIFFUSERS
Throw 4-8 3-6 8-14 7-12 12-19 11-18 17-25 16-23 22-31 21-29 26-36 24-34
NC - - - 24 29 34
Total CFM 200 300 400 500 600 700
CFM/Side 75 50 113 75 150 100 188 125 225 150 263 175
12 x 12
Throw 6-12 5-9 10-17 8-15 15-23 13-20 20-29 18-26 24-34 22-31 28-40 26-37
NC - - 22 27 32 37
Total CFM 313 469 625 781 938 1094
CFM/Side 75 50 176 117 234 156 293 195 352 234 410 273
15 x 15
Throw 6-12 5-9 12-22 10-18 17-27 15-23 23-33 20-29 27-38 25-35 31-44 29-40
NC - - 24 29 34 39
Total CFM 450 675 900 1125 1350 1575
CFM/Side 169 113 253 169 338 225 422 281 506 338 591 394
18 x 18
5000/5500S
Throw 10-20 8-16 15-25 12-21 20-31 17-27 25-37 22-32 30-42 27-38 34-48 31-44
NC - 20 25 30 35 40
Total CFM 613 919 1225 1531 1837 2144
CFM/Side 230 153 345 230 459 306 574 383 689 459 804 536
21 x 21
Throw 12-23 10-19 16-28 14-24 22-34 19-30 27-40 24-36 32-45 29-41 36-51 33-47
NC - 21 16 31 36 41
Total CFM 800 1200 1600 2000 2400 2800
CFM/Side 300 200 450 300 600 400 750 500 900 600 1050 700
24 x 24
Throw 12-24 11-22 17-30 16-27 23-35 21-33 28-41 26-38 33-47 31-44 37-52 35-50
NC - 22 27 32 37 42
Total CFM 1013 1519 2025 2531 3037 3544
CFM/Side 380 253 570 380 759 506 949 633 1139 759 1329 886
27 x 27
Throw 12-23 12-24 17-29 17-19 22-34 22-35 27-40 28-40 32-46 33-46 36-51 37-52
NC - 23 28 33 38 43
CD70 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 5500 PERFORMANCE DATA/4-WAY SQUARE PATTERN (S4)
MODEL 5500/5500S
Neck Velocity
200 300 400 500 600 700 800
Ps .011 .024 .044 .067 .097 .131 .131
DIFFUSERS
Neck Size Pt .014 .030 .054 .083 .119 .161 .161
CEILING
Total CFM 113 169 225 281 338 394 450
CFM/Side 28 42 56 70 84 98 113
6x6
Throw 5 6 11 13 14 15 15
NC - - - 15 20 25 25
Total CFM 113 169 225 281 338 394 450
CFM/Side 28 42 56 70 84 98 113
9x9
Throw 8 10 16 19 20 21 21
NC - - - 17 22 27 27
Total CFM 200 300 400 500 600 700 800
5000/5500S
Total CFM 800 1200 1600 2000 2400 2800 3200
CFM/Side 200 300 400 500 600 700 800
24 x 24
Throw 22 30 42 50 53 55 55
NC - 15 20 25 35 35
Total CFM 10313 1519 2025 2531 30 3544 4050
CFM/Side 253 380 506 633 3038 886 1013
27 x 27
Throw 25 34 44 56 759 61 61
NC - 16 21 26 59 36 36
Total CFM 1513 2269 3025 3781 31 5294 6050
CFM/Side 378 567 756 945 4538 1323 1513
33 x 33
Throw 30 42 56 68 1134 75 75
NC - 17 22 27 73 37 37
Total CFM 1800 2700 3600 4500 32 6300 7200
CFM/Side 450 675 900 1125 5400 1575 1800
48 x 48
Throw 31 43 59 71 1350 75 75
NC 16 18 24 29 75 38 38
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Horizontal Throw Throw distance in feet at terminal velocities of 150fpm, 100fpm and 50fpm.
NC Noise criterion, sound pressure level NC ratings are based on sound power
DIFFUSERS
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
CEILING
CD72 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
MODEL 5500DD
Model 5500DD is an architectural diffuser designed to excel in both
performance and aesthetic
Tag: appeal. It is available in both supply and
Engineer:
return models.
Project: Contractor:
DIFFUSERS
Design accepts all popular ceiling
Location: tiles (by others)
Architect:
CEILING
Date: Submitted By:
4-way air pattern
Architectural Deflection Diffusers
Submittal: 5500 DD
Aluminum construction
Aluminum - Fixed Louvered Face
Designed to allow the ceiling tile to be installed (by others) from the face without having to remove the plenum.
Models: 5500DD (DDI)-6 Supply - Non Insulated (Insulated) - T-Bar Lay in
Optional metal(DDI)-8
5500DD face shipped loose
Supply or welded
- Non in place
Insulated (Insulated) - Tegular T-Bar
5500DD (DDI)-9 Supply - Non Insulated (Insulated) - 24x24 Donn (USG) Ceiling Grid
Available with one through
5500 DDR-6
four slots
Return - Non Insulated - T-Bar Lay in
5500 DDR-8 Return - Non Insulated - Tegular T-Bar
5500 DDR-9 Return - Non Insulated - 24x24 Donn (USG) Ceiling Grid
Model: 5500DD-8 = Tegular T-Bar Non Insulated Model: 5500DDR-8 = Tegular T-Bar
Model: 5500DDI-8 = Tegular T-Bar Insulated
1
Duct Size - 4
Optional Internal
Insulation Light Shield
2"
5500DD
7" Return Air Opening 7"
Ceiling Tile By Others
(Open to Air)
Ceiling Tee (* See Available Accessories) Ceiling Tee
By Others By Others
Model: 5500DD-9 = 24x24 Donn (USG) Ceiling Grid Non Insulated Model: 5500DDR-9 = 24x24 Donn (USG) Ceiling Grid
Model: 5500DDI-9 = 24x24 Donn (USG) Ceiling Grid Insulated
1
Duct Size - 4
Optional Internal
2"
Insulation Light Shield
Units shall be square face ceiling supply diffusers and RADIAL SHUTTER DAMPER
shall have a factory attached back. Back pan must be METALAIRE model RSD steel round radial shutter damper
of sufficient height to allow center tile (by the ceiling
shall be provided. Damper shall consist of gang operated
system manufacturer) to be installed from the diffuser
radial blades that slide perpendicular to air flow direction.
face without disconnecting the face from the back pan.
The damper shall be adjusted from full open to full closed.
Devices without back pan attached to the diffuser face
Damper shall be adjusted with a screwdriver slot.
will not be allowed.
The units shall be the size and quantity as outlined in the OPPOSED BLADE DAMPER
plans and specifications. METALAIRE model D3 aluminum or SD3 Steel round
Diffuser shall be one through four slots. The diffuser shall opposed blade type dampers shall be provided. Damper
be designed to integrate with the ceiling type. shall consist of gang operated blades that can be
adjusted from full open to full closed. Damper shall be
RETURN SQUARE AND adjusted with a screwdriver slot.
RECTANGULAR LOUVERED FACE
ALUMINUM/SERIES 5500DDR Performance Specification
5500DD
CD74 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
5500DD MODEL NUMBER SPECIFICATION
SUPPLY FIXED LOUVERED FACE ARCHITECTURAL DIFFUSER
Model # Slots Inlet Size Module Available Finishes
5500DD-6 T-Bar Lay-in 1 6 Standard
5500DDI-6 T-Bar Lay-in Insulated 2 8 01 White
DIFFUSERS
5500DD-8 Tegular T-Bar 3 10 Optional
CEILING
24 x 24
5500DDI-8 Tegular T-Bar Insulated 4 12 02 Satin Silver
5500DD-9 Donn Fineline 14 03 Black
5500DDI-9 Donn Fineline Insulated 16 28 Custom Color
Available Accessories
D3 Aluminum Radial Opposed Blade Damper
SD3 Steel Radial Opposed Blade Damper
Available Options
CC Closed Cell foam insulation
EI External foil back insulation
5500DD
RETURN FIXED LOUVERED FACE ARCHITECTURAL DIFFUSER
MODEL 5500DDR
Model # Slots Module Available Finishes
5500DDR-6 T-Bar Lay-in 1 Standard
5500DDR-8 Tegular T-Bar 2 24 x 24 01 White
5500DDR-9 Donn Fineline 3 Optional
4 02 Satin Silver
03 Black
28 Custom Color
NC 20 25 29 33 36 39 41
Throw 3-5-7 4-6-8 5-7-10 5-8-11 6-9-12 6-10-13 7-10-14
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Throw Throw distance in feet at terminal velocities of 150fpm, 100fpm and 50fpm
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
Ps Static pressure = PtPv (inches of water column)
Pt Total pressure (inches of water column)
Pv Velocity pressure (inches of water column)
fpm Velocity of air stream in Feet per Minute. To determine total pressure for other inlet sizes, divide the CFM
by the sq footage of the inlet size (chart above). The result is the duct velocity in fpm. From the Pv chart,
determine the Pv and add it to the Ps shown in the performance chart to determine the Pt
CD76 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 5500DDR PERFORMANCE DATA
MODEL 5500DDR RETURN
CFM 100 125 165 200 225 275
1 Slot NC <20 20 27 25 30 35
Ps -.020 -.030 -.060 -.080 -.100 -.150
DIFFUSERS
CFM 155 190 250 310 345 425
CEILING
2 Slot NC <20 22 24 27 32 37
Ps -.020 -.030 -.060 -.080 -.100 -.150
CFM 225 275 360 450 505 620
3 Slot NC 21 24 25 29 34 38
Ps -.020 -.030 -.060 -.080 -.100 -.150
CFM 295 350 430 590 660 810
4 Slot NC 22 25 27 30 35 40
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
Ps Static pressure = PtPv (inches of water column)
5500DD
Aluminum construction
CEILING
Square neck sizes only in 2" increments with 1" vane spacing
12 x 12 12 x 12
14 x 14 14 x 14
16 x 16 16 x 16
18 x 18 18 x 18
CD78 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 5200 SPECIFICATIONS
DIFFUSERS
CEILING
Air Diffusers shall be aluminum model 5200 manufactured Paint Specification
by METALAIRE. Units shall consist of a fixed pattern Process shall be anodic electro-deposition using an
louvered core fastened into a border with spring loaded anodic acrylic paint. Units shall undergo pre-treatment
latches. Core shall be removable without the use of tools. including a pressurized spray stage using an alkaline
The units shall be the size and quantity outlined in the cleaner and a de-ionized water rinse.
plans and specifications.
Diffusers shall be available in 1, 2-way opposite, 2-way
corner, 3, and 4-way directional air patterns. Units shall
Accessories
OPTIONAL DAMPERS:
Aluminum DA opposed blade dampers shall be provided.
Damper shall be adjusted using a handle accessible
through the face of the diffuser.
Screwdriver slot operators are not allowed.
5200
10 10 Optional
CEILING
Available Accessories
DA Aluminum Opposed Blade Damper
LOUVERED FACE DIFFUSERS
Available Options
NSH No Screw Holes
SH Screw Holes
8 8 S4 Sq 4-Way 01 White
10 10 Optional
12 12 S1 Sq 1-Way 02 Satin Silver
14 14 S2 Sq 2-Way 03 Black
16 16 S3 Sq 3-Way 24 Mill
18 18 SC Sq 2-Way corner 28 Custom Color
Available Accessories
DA Aluminum Opposed Blade Damper
Available Options
NSH No Screw Holes
SH Screw Holes
CD80 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 5200 PERFORMANCE DATA
MODEL 5200
CFM Outlet Size 6x6 8x8 10 x 10 12 x 12 14 x 14 16 x 16 20 x 20 22 x 22 24 x 24
Vn 400 225 114 100
100 Ps 0.004 0.001 0.001 0.001
DIFFUSERS
Throw 12-17-14-12 17-14-12-10 14-12-10-9 12-10-8-7
CEILING
Vn 800 450 288 200 147
200 Ps 0.014 0.004 0.002 0.001 0.001
Throw 33-27-23-20 27-22-19-16 23-19-16-14 21-17-14-12 18-15-13-11
Vn 675 432 300 220
300 Ps 0.008 0.004 0.002 0.001
Throw 35-30-25-22 35-30-25-22 27-22-19-15 24-20-17-15
Vn 900 576 400 294
5200
1200 Ps 0.019 0.012 0.004 0.002 0.001
Throw 70-58-48-42 64-53-44-39 55-46-38-33 46-38-32-28 43-36-30-26
Vn 787 504 417 350
1400 Ps 0.014 0.005 0.003 0.002
Throw 63-52-43-38 60-50-41-36 51-43-35-31 48-40-33-29
Vn 900 576 476 400
1600 Ps 0.02 0.006 0.005 0.003
Throw 76-63-52-46 65-54-45-40 61-51-42-37 57-48-40-35
Vn 648 536 450
1800 Ps 0.006 0.011 0.006
Throw 65-54-45-40 78-65-54-48 76-61-51-45
Vn 720 595 500
2000 Ps 0.007 0.008 0.004
Throw 70-58-48-42 70-58-48-42 66-55-45-40
Vn 792 655 550
2200 Ps 0.014 0.009 0.005
Throw 79-66-55-48 47-62-51-45 70-58-48-42
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
fpm Velocity of air stream in Feet per Minute
Pv Velocity pressure (inches of water column)
DIFFUSERS
CD82 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
MODEL 9000
Model 9000 is designed to supply large volumes of air at low sound
levels and pressure drop. Field adjustment of the air pattern is fast
and easy by repositioning the louvered modular pattern controllers to
METAL AIRE *
DIFFUSERS
suit the desired application.
Tag: Submittal: 9000
CEILING
Series
All aluminum
: construction
9000 Submittal No:Modular9000
Square
Modular cores can be adjusted to obtain 1-way, 2-way
Extruded
/ Rectangular
opposite, 2-way
Tag:
Aluminum corner,
- 1,3-way
Core Diffusers
or 4 Cores
2, 3 or METAL*AIR
Submittal No: *AIR
METAL
Square / Rectangular Modular Core Diffusers
4-way airAluminum
Extruded patterns - 1, 2 , 3 or 4 Cores 9000-7 Tag:
Series :
Concealed T-Bar9000 Models: 9000
9000-8 Series : T-Bar 9000
Cores are easily removable with spring load latches no tools required
Models: 9000-1 Surface Mount
9000-9Square /24
Tegular
Rectangular Modular
x 24 Donn (USG) Core
Ceiling Diffusers
Grid
Submittal No: 9000
9000-2 Beveled Surface Mount Extruded Aluminum - 1, 2, 3 or 4 Cores
9000-6 Lay in T-Bar Options: OBD Square / Rectangular
Steel Opposed Modular
Blade Core
Damper Diffusers
9000-6P Lay in T-Bar Panel OBDAExtruded Aluminum
Models: Aluminum
9000-7 -Concealed
1, 2, 3Blade
Opposed or 4 Cores
T-BarDamper
9000-8 Tegular T-Bar
Models: 9000-7 Concealed T-Bar
9000-9 24 x 24 Donn (USG) Ceiling Grid
Model 9000-1 ( Surface Mount ) Model 9000-7 ( Concealed Tegular
9000-8 T-Bar ) T-Bar
Options: OBD Steel Opposed Blade Damper
Number 9000
Low Limit 2 3
Removable Modular Core Frame 3 Lay-In Filler Panel Frame Removable Modular Core of Duct 2 4
4 Model 9000-9 ( 24 x 24 Donn Ceiling Grid 7 )x 22 7 Overall Face Note For 9000-8 and 9000-9 Models:
Overall = Listed Size + 4 21 Ceiling Line 22 8 8 Removable Modular Core Diffuser listed neck sizes even multiples of core
T-BarLay-In Filler Panel
Spacing = 24 xFrame24 Note For 9000-8 and 9000-9 Models
sizes square or rectangular at least below table.
Model 9000-9 ( 24 x 24 Donn Ceiling=Grid 22 7 ) Size7 Overall Face Diffuser listed neck sizes even multip
Duct Opening 8 x 22
Listed 8 Model 9000-8 maximum diffuser listed size must
Model 9000-6 ( Lay in T-Bar ) T-Bar 1
Spacing = 24 x 24 be at least 6" less
sizes square or rectangular at least b
Note
thanFor 9000-8
T-Bar and 9000-9 Models
Module.
Neck Size = Listed Size - 4 Model 9000-8 maximum diffuser liste
9000
1
Overall Diffuser = T-Bar Spacing - 4 Model 9000-9 ( 24 x 24 Donn Ceiling Grid
Spring )
Duct Opening = Listed Size
Diffuser listed neck sizes even multipl
be at least 6" less than T-Bar Module
Note For 9000-6 Model: Loaded sizes square or rectangular at least be
T-BarSize
Spacing = 24 x 24 1 4 x 4 6 x 18 10 x 15
Duct Opening = Listed Size CoreSizes
Diffuser Listed Neck Latch- In even multiples Neck = Listed Size - Model 9000-8 maximum diffuser listed
Spring of 4
4 x 8 be at least
7 x 76"4 less
x 4 11 x 11 6 x 18 Module. 10
Spring Neck Size = Listed Size - 41 core sizes. Neck Dimensions must be Loaded 8 x 8, 20 x 8Duct Opening = Listed Size 23 4
than T-Bar
or 20 x 20 and 4 inches less than T-Bar grid size. Neck Size = Listed Size -
Core Latch
1 4 x 12 7 x 14 4 x 8 12 x 127 x 7 11
Loaded Spring 4
For other neck sizes, use model 9000-6P. 3 5 x 5 8 x 8 4 x 41212 x 6
16 7x x 14
18 1012
Core Latch Loaded 24
Submittal
Revision: C
Dimensions Date: 01/26/2016 Page: of 2 Dimensions are in Inches P
Submittal No. 9000 Date: 09/01/2003 2003are in inches
Metal Industries, Inc. Clearwater, FL All Rights reserved. 1Printed in U.S.A. (727) 441 - 2651 Fax (727) 443 - 7167 www.metalaire.com sales@metalair
Metal Industries, Inc. Clearwater, FL (727) 441 - 2651 Fax (800) 865 8383 www.metalaire.com sales@metalaire.com
2003 Metal Industries, Inc. Clearwater, FL All Rights reserved. Printed in U.S.A. (727) 441 - 2651 Fax (727) 443 - 7167 www.metalaire.com sales@metalaire.com
CD84 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
9000 MODEL NUMBER SPECIFICATION
MODULAR CORE CEILING DIFFUSER
Neck
1 Core
Model 6 8 10
DIFFUSERS
9000-1 Surface Mount 6 X
CEILING
9000-2 Beveled Drop Surface Mount 8 X
10 X
4 Core
6 8 10 12 14 16 18 20 22 24
6 X
8 X
10 X
9000
03 Black
24 Mill
28 Custom Color
6 X
CEILING
8 X
10 X
9000-6 T-bar Lay-in 12 X
24 x 24
14 X
16 X
18 X
20 X
LOUVERED FACE DIFFUSERS
6 X
8 X
9000-7 10 X
Concealed Spline
9000-8 Tegular 24 x 24 12 X
Donn Fineline
9000-9 14 X
16 X
18 X
03 Black
24 Mill
28 Custom Color
CD86 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 9000 PERFORMANCE DATA
MODEL 9000 (SINGLE CORE)
Neck Vel 200 300 400 500 600 700 800
Outlet Vel 450 675 900 1125 1350 1575 1800
Single
Core Size Pt 0.013 0.028 0.50 0.079 0.114 0.155 0.202
DIFFUSERS
CFM 13 19 25 32 38 44 50
CEILING
3x3 Throw 2-3 3-4 4-5 4-6 5-7 6-8 6-9
NC <20 <20 <20 <20 20 25 27
CFM 22 33 44 56 67 78 89
4x4 Throw 3-4 4-5 5-7 6-8 6-9 7-10 8-11
NC <20 <20 <20 <20 22 27 31
CFM 35 52 70 87 104 122 139
5x5 Throw 4-5 5-7 6-9 7-10 8-12 9-13 10-14
9000
NC <20 <20 <20 23 28 33 37
CFM 139 208 278 347 416 486 555
10 x 10 Throw 7-10 10-13 12-16 13-20 15-23 16-24 18-26
NC <20 <20 <20 24 29 34 38
CD88 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 9000 PERFORMANCE DATA
MODEL 9000 (4 CORE)
Neck Vel 200 300 400 500 600 700
Outlet Vel 450 675 900 1125 1350 1575
DIFFUSERS
CEILING
CFM 450 670 900 1120 1345 1570
2.25 <20 <20 22 29 34 39
4-Way Throw 6-9 9-12 10-15 12-18 13-21 15-23
18 x 18
3-Way Throw 6-9 8-13 9-12 13-17 10-15 14-21 12-18 17-25 13-21 18-30 15-23 21-32
2-Way Throw 8-13 13-17 14-21 17-25 18-30 21-32
1-Way Throw 12-18 18-24 20-30 24-36 26-42 30-46
CFM 555 830 1110 1390 1670 1945
2.78 <20 <20 23 30 35 40
9000
4-Way Throw 8-12 12-16 14-20 16-24 18-28 20-30
24 x 24
3-Way Throw 8-12 11-17 16-16 17-22 14-20 20-28 16-24 22-34 18-28 25-39 20-30 28-42
2-Way Throw 11-17 17-22 20-28 22-34 25-39 28-42
1-Way Throw 16-24 24-32 28-40 32-48 36-56 40-60
DEFINITION OF UNITS
CFM Cubic Feet per Minute
fpm Velocity of air stream in Feet per Minute
Pv Velocity pressure (inches of water column)
Pt Total pressure (inches of water column)
Ps Static pressure = PtPv (inches of water column)
Throw Horizontal distances in feet to the terminal vel of 150 and 100fpm with supply air temp 20F below room air temp
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
The cube core return provides an integrated air return path which minimizes
pressure drop and resultant noise levels.
CD90 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
MODEL DAF-CC5
Model DAF-CC5 is a combination supply/return directional diffuser
with extruded aluminum louvered blades for air supply and a cube
core for return air. The DAF-CC5 is designed for high capacity
DIFFUSERS
applications such as those found in big box stores with minimal duct
CEILING
work. The diffuser is ideally suited for designs which require single
point supply and return air.
Extruded aluminum construction
Cube core return maximizes free area and visibility into duct work
CONCENTRIC SUPPLY /
Overall Diffuser
Ceiling Opening
1
Supply Neck Size = Listed Size - 8
1
Return Neck Size = Listed Size - 8
3
16 23
8
DAF-CC5
Beveled (2) T-Bar without T-Bar with Concealed T-Bar (7) Tegular (8)
Panel (6) Panel (6)
Screw Holes
Duct Connection DAF-CC5 4-Way Air Patterns Only FSM: (Face Screw Mount)
(S4 Shown) (Square or Rectangular) Typical Hole Locations
-Supply -Return
ceiling system.
CONCENTRIC SUPPLY /
28 Custom Color
CD92 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
DAF-CC5 MODEL NUMBER SPECIFICATION
CONCENTRIC SUPPLY/RETURN CEILING DIFFUSER
Model Supply Return Module Available Finishes
6x6 Standard
12 x 12
9x9 01 White
DIFFUSERS
6x6 Optional
CEILING
15 x 15 9x9 02 Satin Silver
24 x 24
12 x 12 or 03 Black
48 x 24
6x6 24 Mill
9x9 28 Custom Color
18 x 18
12 x 12
15 x 15
6x6
CONCENTRIC SUPPLY /
DAF-CC5-6 T-bar Lay-in 21 x 21 12 x 12 24 x 24 Only
15 x 15
18 x 18
24 x 24
18 x 18
27 x 27
30 x 30
21 x 21
33 x 33
36 x 36 24 x 24 48 x 48 Only
39 x 39 27 x 27
27 x 27
42 x 42 30 x 30
DAF-CC5
33 x 33
12 x 12 9x9
DAF-CC5-7 15 x 15 9x9
Concealed Spline Tegular 24" x 24" Only
DAF-CC5-8 12 x 12
18 x 18
15 x 15
NC 25 35 37 30 37 37 38
CONCENTRIC SUPPLY /
CD94 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES DAF-CC5 PERFORMANCE DATA/4-WAY SQUARE PATTERN (S4)
MODEL DAF CC5
Based on 75% Return of Supply Air
Neck Velocity
200 300 400 500 600 700 800
DIFFUSERS
Face Velocity 500 750 1000 1250 1500 1750 2000
CEILING
Ps .013 .03 .05 .08 .12 .16 .21
All
Supplies Pt .016 .04 .06 .10 .14 .19 .25
Total CFM 90 130 175 220 265 310 350
12 x 12
Throw 2-4 3-5 5-8 6-10 6-12 7-13 8-14
Supply
9x9 Inlet Velocity 125 180 230 295 355 410 465
CONCENTRIC SUPPLY /
NC - - 21 26 31 35 39
Total CFM 200 300 400 500 600 700 800
15 x 15
Throw 3-5 5-8 6-10 6-12 7-14 8-17 10-19
Supply
9x9 Inlet Velocity 265 400 535 670 805 935 1070
Return Ps .010 .020 .040 .060 .090 .120 .160
NC - - 21 26 35 40 45
Total CFM 250 375 500 625 750 875 1000
18 x 18
Throw 3-5 4-8 6-11 6-12 8-14 9-16 10-19
Supply
DAF-CC5
12 x 12 Inlet Velocity 190 280 375 470 560 655 750
Return Ps .010 .010 .020 .030 .040 .060 .080
NC - - 24 29 34 38 42
Total CFM 140 210 280 350 420 490 560
18 x 18
Throw 4-6 5-8 6-12 7-13 8-15 9-17 11-20
Supply
NC - - 26 31 36 40 43
CONCENTRIC SUPPLY /
CD96 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES DAF-CC5 PERFORMANCE DATA/4-WAY SQUARE PATTERN (S4)
MODEL DAF CC5
Based on 75% Return of Supply Air
Neck Velocity
200 300 400 500 600 700 800
DIFFUSERS
Face Velocity 500 750 1000 1250 1500 1750 2000
CEILING
Ps .013 .03 .05 .08 .12 .16 .21
All
Supplies Pt .016 .04 .06 .10 .14 .19 .25
CONCENTRIC SUPPLY /
39 x 39 Total CFM 1100 1650 2200 2750 3300 3850 4400
Supply Throw 5-10 8-17 11-21 15-23 18-34 25-39 26-42
Total CFM 825 1240 1650 2060 2475 2890 3300
DAF-CC5
42 x 42 Total CFM 1200 1800 2400 3000 3600 4200 4800
Supply Throw 4-10 8-17 11-21 15-24 18-33 24-38 25-44
Total CFM 900 1350 1800 2250 2700 3150 3600
NC - 22 28 33 39 44 48
CONCENTRIC SUPPLY /
CD98 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES DAF-CC5 PERFORMANCE DATA/4-WAY RECTANGULAR PATTERN (R4)
MODEL DAF CC5
Based on 75% Return of Supply Air
Neck Velocity
200 300 400 500 600 700 800
DIFFUSERS
Face Velocity 500 750 1000 1250 1500 1750 2000
CEILING
Ps .013 .03 .05 .08 .12 .16 .21
All
Supplies Pt .016 .04 .06 .10 .14 .19 .25
Total CFM 640 960 1280 1600 1920 2240 2560
30 x 24
Throw Side A 5-7 7-10 9-13 11-17 13-20 16-23 18-28
Supply
Throw Side B 4-7 5-9 7-11 9-14 1-17 13-18 15-23
Total CFM 480 720 960 1200 1440 1680 1920
CONCENTRIC SUPPLY /
NC 20 23 26 30 35 40 45
Total CFM 675 1015 1350 1690 2030 2365 2705
36 x 27
Throw Side A 5-8 7-10 9-13 11-17 13-20 16-24 18-28
Supply
Throw Side B 4-7 6-9 8-12 10-15 11-19 14-20 17-25
Total CFM 505 760 1010 1270 1520 1775 2030
DAF-CC5
27 x 21 Inlet Velocity 135 205 270 340 410 480 545
Return Ps .010 .010 .010 .020 .025 .030 .040
NC 20 23 26 30 35 40 45
Total CFM 1050 1575 2100 2625 3150 3675 4200
42 x 33
Throw Side A 6-10 8-12 11-16 13-20 16-24 19-28 22-32
Supply
Throw Side B 4-8 6-10 9-14 12-18 14-21 17-25 19-29
Total CFM 790 1180 1575 1970 2360 2755 3150
NC 20 23 26 30 35 40 45
Total CFM 825 1240 1650 2065 2480 2890 3305
48 x 27
Throw Side A 6-8 8-12 10-15 13-19 15-23 18-27 21-30
Supply
Throw Side B 5-7 7-10 8-12 10-15 13-19 14-21 17-25
Total CFM 620 930 1240 1550 1860 2170 2480
CD100 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES DAF-CC5 PERFORMANCE DATA/4-WAY RECTANGULAR PATTERN (R4)
MODEL DAF CC5
Based on 75% Return of Supply Air
Neck Velocity
200 300 400 500 600 700 800
DIFFUSERS
Face Velocity 500 750 1000 1250 1500 1750 2000
CEILING
Ps .013 .03 .05 .08 .12 .16 .21
All
Supplies Pt .016 .04 .06 .10 .14 .19 .25
Total CFM 1200 1800 2400 3000 3600 4200 4800
48 x 36
Throw Side A 7-11 9-13 11-17 15-22 18-26 21-30 23-34
Supply
Throw Side B 5-9 7-11 10-15 13-19 15-21 17-26 20-30
Total CFM 900 1350 1800 2250 2700 3150 3600
CONCENTRIC SUPPLY /
NC 20 23 26 30 35 40 45
Total CFM 1250 1875 2500 3125 3750 4375 5000
48 x 39
Throw Side A 7-11 9-13 11-17 15-22 16-25 18-27 21-31
Supply
Throw Side B 5-9 7-11 10-15 11-16 13-19 15-23 18-28
Total CFM 940 1405 1875 2345 2810 3280 3750
DAF-CC5
33 x 30 Inlet Velocity 180 265 355 445 535 620 710
Return Ps .010 .010 .020 .030 .040 .050 .070
NC 20 23 26 30 35 40 45
Total CFM 910 1365 1820 2275 2730 3185 3640
60 x 21
Throw Side A 6-10 9-13 11-17 17-22 18-26 21-30 23-34
Supply
Throw Side B 4-7 6-9 8-11 10-15 12-18 14-20 15-23
Total CFM 680 1025 1365 1705 2050 2390 2730
NC 20 23 26 30 35 40 45
Total CFM 1350 2025 2700 3375 4050 4725 5400
60 x 33
Throw Side A 8-13 10-15 13-20 17-24 18-30 22-34 26-38
Supply
Throw Side B 5-9 7-11 9-14 12-18 14-21 17-25 19-29
Total CFM 1010 1520 2025 2530 3035 3545 4050
CD102 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES DAF-CC5 PERFORMANCE DATA/4-WAY RECTANGULAR PATTERN (R4)
MODEL DAF CC5
Based on 75% Return of Supply Air
Neck Velocity
200 300 400 500 600 700 800
DIFFUSERS
Face Velocity 500 750 1000 1250 1500 1750 2000
CEILING
Ps .013 .03 .05 .08 .12 .16 .21
All
Supplies Pt .016 .04 .06 .10 .14 .19 .25
Total CFM 1810 2720 3625 4530 5435 6340 7250
60 x 42
Throw Side A 9-15 11-17 15-23 19-29 23-35 27-40 30-45
Supply
Throw Side B 7-11 9-13 11-17 15-23 19-27 22-31 24-35
Total CFM 1360 2040 2720 3400 4080 4755 5440
CONCENTRIC SUPPLY /
NC 20 25 30 35 40 45 50
Total CFM 1875 2815 3750 4690 5630 6565 7500
60 x 45
Throw Side A 9-15 11-17 15-23 19-28 22-34 26-40 30-45
Supply
Throw Side B 7-12 9-14 12-18 15-23 17-27 21-32 24-36
Total CFM 1400 2110 2810 3520 4220 4925 5625
DAF-CC5
45 x 33 Inlet Velocity 140 210 280 355 425 495 565
Return Ps .010 .010 .010 .020 .025 .030 .040
NC 20 25 30 35 40 45 50
Total CFM 2000 3000 4000 5000 6000 7000 8000
60 x 51
Throw Side A 9-15 11-17 15-23 19-29 22-35 27-41 31-46
Supply
Throw Side B 8-13 10-15 13-20 16-25 20-30 23-35 27-40
Total CFM 1500 2250 3000 3750 4500 5250 6000
NC 20 25 30 35 40 45 50
DEFINITION OF UNITS
CFM Cubic Feet per Minute (Air)
fpm Velocity of air stream in Feet per Minute
Pv Velocity pressure (inches of water column)
Pt Total pressure (inches of water column)
Ps Static pressure = PtPv (inches of water column)
Throw Cataloged Throw is horizontal distances in feet to the terminal velocities of 150 and 50fpm
with ambient supply air temperature
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
DAF-CC5
CD104 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
PERFORATED
CEILING DIFFUSERS
DIFFUSERS
CEILING
MODEL 7000 MODEL PRTB AND SPRTB MODEL 7300
MODEL 7350 MODEL 7500 AND 7550 MODEL 7600 AND 7650
CEILING DIFFUSERS
PERFORATED
MODEL 7550R-F AND 7650R-F MODEL 7900 AND 7950
Model 7000 is designed for use in most types of ceilings for efficient,
draft free air distribution. It is ideal for applications requiring a variety of air
diffusion configurations, corrosion resistant construction, and square or
rectangular face and neck size combinations. Five interchangeable air pattern
controllers with individually adjustable curved blades provide full vertical to
horizontal air pattern capability. Six frame styles and a large selection of
square and rectangular frames and neck sizes make the 7000 easy to specify
for new or existing buildings. Matching returns are available (Model 7000R). PAGE 107
Model PRTB and SPRTB are an economical choice for non-ducted plenum
return application. They are shipped without pattern controllers and are for a PAGE 118
T-Bar Grid System.
PAGE 122
CEILING
Model 7500 and 7550 are designed for use in ceiling applications which call
for air pattern adjustability in the field. The perforated face is hinged to swing
CEILING DIFFUSERS
open to permit easy access to four air pattern controllers centrally pivoted on
the inside face surface. These units are available in both steel and aluminum
PERFORATED
construction and are also available in round neck, 7500, or square neck,
7550. Matching returns are available (Model 7500R and Model 7550R).
PAGE 130
Model 7600 and 7650 are available in both steel and aluminum
construction. The hinged fully removable face allows access to the curve
blade pattern controllers mounted in the neck of the diffuser. These units
are available in both round neck, 7600, and square neck, 7650.
Matching returns are available (Model 7600R and Model 7650R). PAGE 142
Model 7550R-F and 7650R-F are perforated return filter diffusers designed
to be installed in standard T-Bar ceiling grids. The hinged perforated face
allows access to the filter (by others). These units are available with a 1" or
2" filter rack.
PAGE 155
Model 7900 and 7950 are designed for supply air distribution in applications
where air pattern adjustment is desired. The perforated face of the diffuser
is secured with spring clips, which allows for easy removal and access to
the cores. The modular cores are spring loaded and can be arranged in the
diffuser frame before or after installation without the use of tools and without
removing the diffuser from the ceiling. These units are available in round neck
(Model 7900) or square neck (Model 7950). PAGE 159
CD106 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
MODEL 7000/7000R
Model 7000 is designed for use in most types of ceilings for efficient,
draft free air distribution. The perforated face blends well with most ceiling
styles and provides the uncluttered appearance preferred by architects.
DIFFUSERS
It is ideal for applications requiring a variety of air diffusion configurations,
CEILING
corrosion resistant construction, and square or rectangular face and neck
size combinations. Six frame styles with a large selection of square and
rectangular neck sizes make the 7000 easy to specify for new or existing buildings.
Extruded aluminum construction
Curved blade pattern controllers mounted in the neck can be adjusted from vertical to horizontal discharge pattern
Available in 1-way, 2-way opposite, 2-way corner, 3-way and 4-way air patterns
CEILING DIFFUSERS
PERFORATED
7000/7000R
86
CD108 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 7000 SPECIFICATIONS
DIFFUSERS
7000-6 T-bar Lay-in
CEILING
7000R-7 Concealed Spline
7000-7 Concealed Spline 7000R-8 Tegular T-bar
7000-8 Tegular T-bar 7000R-9 Donn Fineline
7000-9 Donn Fineline Air Inlets shall be aluminum model 7000R manufactured
Air Diffusers shall be aluminum model 7000 by METALAIRE. Units shall consist of aluminum 51%
manufactured by METALAIRE. Units shall consist of free area perforated face and an aluminum border and
aluminum 51% free area perforated face and an backpan. Perforated holes shall be 3/16" diameter on
aluminum border and backpan. Perforated holes shall 1/4" staggered centers. Units shall be designed for use
be 3/16" diameter on 1/4" staggered centers. in ducted return or exhaust applications.
Outer border of units shall be extruded aluminum Outer border of units shall be extruded aluminum
CEILING DIFFUSERS
construction. The perforated face shall be removable construction. The perforated face shall be removable
PERFORATED
allowing access to the aluminum curved blade pattern allowing access to interior of diffuser. Face shall be
controller mounted into the neck of the diffusers. Face secured in place with tension spring clips.
shall be secured in place with tension spring clips. The units shall be the size and quantity as outlined in
Pattern controller blades shall be individually adjustable the plans and specifications.
and allow the discharge pattern to be adjustable from
Units shall be designed to integrate into the specified
vertical to horizontal. Pattern controller blades shall
ceiling system.
pivot in friction mounted retainers. Retainers shall hold
the deflector blade position throughout the specified
Square Neck Options and Accessories:
operating range of the device. Metal friction wires are
not acceptable. OPPOSED BLADE DAMPER
Diffusers shall be available in 1, 2-way opposite, 2-way METALAIRE model D7A aluminum or D7 steel round
7000/7000R
corner, 3, and 4-way directional air patterns. Units shall opposed blade type dampers shall be provided. Damper
have square inlets. shall consist of gang operated blades that can be
The units shall be the size and quantity as outlined in the adjusted from full open to full closed. Damper shall be
plans and specifications. adjusted with a handle accessible by opening the face of
the diffuser.
Units shall be designed to integrate into the specified
ceiling system. EQUALIZING GRID
METALAIRE model L9 aluminum square equalizing
grid shall be provided. Equalizing grid shall consist of
aluminum blades mounting in an aluminum frame.
EQUALIZING GRID
METALAIRE model G3 aluminum round equalizing grid
shall be provided. Equalizing grid shall consist of
1/2" x 1/2" x 1/2" aluminum cubed core mounting in
an aluminum frame.
7000/7000R
CD110 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
7000 MODEL NUMBER SPECIFICATION
PERFORATED CEILING DIFFUSER EXTRUDED ALUMINUM
Neck
Model 6 8 9 10 12 14 15 16 18 Module
7000-1 Supply Surface Mount 6 X 12 x 12
7000R-1 Return Surface Mount 6 X
DIFFUSERS
14 x 14
8 X
CEILING
6 X
8 X 15 x 15
9 X
6 X
8 X
16 x 16
9 X
10 X
6 X
8 X
9 X 18 x 18
10 X
12 X
6 X
CEILING DIFFUSERS
8 X
PERFORATED
9 X
20 x 20
10 X
12 X
14 X
6 X
8 X
9 X
10 X 21 x 21
12 X
14 X
15 X
6 X X X X X X X X X 24 x 12
6 X
8 X
9 X
7000/7000R
10 X
12 X 24 x 24
14 X
15 X
16 X
18 X
6 X X X X X X X X X 36 x 12
6 X
8 X
9 X
10 X
12 X 36 x 24
14 X
15 X
16 X
18 X
6 X X X X X X X X X 48 x 12
6 X
8 X
9 X
10 X
12 X 48 x 24
14 X
15 X
16 X
18 X
CD112 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
7000 MODEL NUMBER SPECIFICATION
PERFORATED CEILING DIFFUSER EXTRUDED ALUMINUM
Neck
Model 6 8 9 10 12 14 15 16 18 Module
7000-6 Supply T-Bar Lay-in 6 X 12 X 12
DIFFUSERS
7000R-6 Return T-Bar Lay-in 6 X X X X X X X X X 24 X 12
CEILING
6 X
8 X
9 X
10 X
12 X 20 X 20
14 X
15 X
16 X
18 X
6 X
CEILING DIFFUSERS
8 X
9 X
PERFORATED
10 X
12 X 24 X 24
14 X
15 X
16 X
18 X
6 X X X X X X X X X 48 X 12
6 X
8 X
9 X
10 X
7000/7000R
12 X 48 X 24
14 X
15 X
16 X
18 X
CD114 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 7000 PERFORMANCE DATA
MODEL 7000
200 300 400 500 600 700 800 900
Nominal fpm Neck Velocity
Neck Size Pv .003 .006 .010 .016 .022 .030 .040 .050
CFM 150 225 300 375 450 525 600 675
DIFFUSERS
Pt .016 .050 .060 .100 .140 .190 .250 .310
CEILING
NC < < 20 25 30 35 40 40
18 x 6 4-Way 3-4-5 3-5-6 4-6-8 6-8-11 7-10-13 8-12-15 9-14-18 10-15-20
3-Way 3-4-5 4-6-8 6-8-11 7-10-13 8-12-16 9-14-18 11-16-21 12-18-24
Throw
2-Way 4-6-8 6-8-11 7-11-14 9-13-17 11-16-21 12-18-24 14-21-28 18-27-33
1-Way 5-7-9 6-9-12 8-12-16 11-16-21 13-19-25 15-22-29 17-25-33 19-28-38
CFM 200 300 400 500 600 700 800 900
Pt .016 .045 .066 .100 .150 .200 .260 .330
NC < 20 25 25 30 35 40 40
12 x 12 4-Way 3-5-6 4-6-8 5-7-10 6-9-12 8-12-15 9-13-17 10-15-20 12-17-23
CEILING DIFFUSERS
3-Way 3-5-6 5-7-9 6-9-12 8-12-15 9-14-18 11-16-22 13-19-25 14-20-27
Throw
2-Way 5-7-9 6-9-12 8-12-16 11-16-21 12-18-24 15-22-29 17-25-33 18-27-36
PERFORATED
1-Way 6-9-12 8-12-16 10-15-20 12-18-24 15-22-29 17-25-33 18-27-36 21-31-42
CFM 270 410 545 680 815 950 1090 1225
Pt .018 .040 .070 .110 .160 .220 .280 .360
NC < 20 25 28 33 37 40 43
14 x 14 4-Way 4-5-7 4-6-9 6-9-12 7-11-14 9-14-18 10-15-20 12-18-24 14-21-28
3-Way 4-5-9 5-8-11 6-10-13 8-13-16 10-15-20 11-17-23 13-19-27 16-23-31
Throw
2-Way 5-7-10 6-9-13 8-12-18 11-17-22 12-19-26 16-23-31 18-26-36 19-29-39
1-Way 6-9-12 8-12-18 10-15-22 13-19-26 15-23-30 17-25-35 19-28-39 21-31-43
CFM 310 470 625 780 935 1090 1250 1405
Pt .018 .050 .070 .110 .160 .210 .280 .350
7000/7000R
NC < 20 25 30 35 40 40 45
15 x 15 4-Way 4-6-8 5-7-10 7-10-13 8-12-16 10-15-20 12-17-23 13-19-26 15-23-30
3-Way 5-7-9 6-9-12 8-12-15 9-14-18 11-16-22 13-19-26 15-23-30 18-26-35
Throw
2-Way 6-9-12 9-14-15 12-17-20 13-19-26 16-22-31 18-27-36 20-30-40 23-33-43
1-Way 7-11-14 9-14-18 11-18-22 14-21-28 16-24-32 19-28-38 21-31-42 23-34-45
CFM 355 590 710 885 1060 1240 1415 1595
Pt .018 .047 .070 .109 .155 .212 .280 .350
NC < 20 25 30 35 40 40 45
16 x 16 4-Way 5-7-9 6-8-11 8-10-14 9-13-18 10-15-21 13-18-27 14-20-28 16-22-31
3-Way 5-7-11 6-9-13 8-13-17 10-15-22 13-19-26 15-22-30 18-25-36 19-29-39
Throw
2-Way 6-10-12 9-14-16 11-17-24 14-21-28 17-25-32 19-26-34 21-34-40 24-34-44
1-Way 7-10-16 9-15-18 12-18-26 15-22-32 18-27-36 19-28-37 24-35-42 26-36-46
CFM 450 675 900 1125 1350 1575 1800 2025
Pt .019 .050 .070 .110 .160 .220 .290 .360
NC < 20 25 30 35 40 40 45
18 x 18 4-Way 5-7-10 6-9-12 8-12-16 10-15-20 12-18-24 14-21-28 16-24-32 18-27-36
3-Way 5-7-12 7-11-14 9-14-18 11-16-22 13-19-26 16-24-31 18-27-36 21-31-41
Throw
2-Way 8-12-18 10-15-20 13-19-26 16-24-32 20-29-39 23-34-45 26-39-52 29-43-58
1-Way 9-14-22 11-16-24 15-23-30 18-27-36 22-32-43 25-37-49 28-42-56 30-45-60
6x6
CEILING
20 x 20
NC < < 20 28 33 38 42
CFM 305 455 610 760 910 1065 1215
22 x 10
NC < < 20 25 30 35 40
CFM 670 1010 1345 1680 2015 2350 2690
22 x 22
NC < < 20 28 33 38 42
CFM 1040 1555 2075 2595 3115 3635 4150
34 x 22
NC < < 20 28 35 40 45
CFM 1405 2105 2810 3510 4210 4915 5615
46 x 22
NC < < 23 30 38 42 45
CD116 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
PERFORMANCE NOTES FOR SERIES 7000
All data is tested in accordance with ANSI/ASHRAE 70-2006.
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
fpm Velocity of air stream in Feet per Minute
Pv Velocity pressure (inches of water column)
DIFFUSERS
Pt Total pressure (inches of water column)
CEILING
Ps Static pressure = PtPv (inches of water column)
Throw Cataloged throw is horizontal distances in feet to the terminal velocities of 150,100 and 50fpm
with supply air temp 20 F below room air temp
NC Noise criteria, sound pressure level NC ratings are based on sound power level (Lw)
re: 10-12 watts minus a 10dB room attentuation in all octave bands
CEILING DIFFUSERS
PERFORATED
7000/7000R
CD118 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES PRTB SPECIFICATIONS
DIFFUSERS
PRTB-6 T-bar Lay-in
CEILING
SPRTB-6 T-bar Lay-in Paint Specification
Process shall be anodic electro-deposition using an
PRTB-8 Tegular T-bar
anodic acrylic paint. Units shall undergo pre-treatment
SPRTB-8 Tegular T-bar
including a pressurized spray stage using an alkaline
PRTB-9 Donn Fineline cleaner and a de-ionized water rinse.
SPRTB-9 Donn Fineline
Air Inlets shall be aluminum model PRTB or steel SPRTB
manufactured by METALAIRE. Units shall be designed
for use in a non-duct return or exhaust applications.
Units shall consist of a 51% free area perforated face.
CEILING DIFFUSERS
Perforated holes shall be 3/16" diameter on
PERFORATED
1/4" staggered centers.
The units shall be the size and quantity outlined in the
plans and specifications.
Units shall be designed to integrate into the specified
ceiling system.
PRTB/SPRTB
36 x 24 02 Satin Silver
48 x 12 03 Black
48 x 24 24 MIll
28 Custom Color
CD120 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES PRTB PERFORMANCE DATA
MODEL PRTB/SPRTB
fpm Neck Velocity 200 300 400 500 600 700 800
Nominal
Neck Size Pv 0.01 0.03 0.05 0.08 0.11 0.15 0.19
CFM 170 250 335 420 505 590 670
12 x 12
DIFFUSERS
NC < < < 20 25 30 35
CEILING
CFM 350 525 700 875 1050 1225 1400
24 x 12
NC < < 20 25 30 35 40
CFM 735 1100 1470 1835 2200 2570 2935
24 x 24
NC < < 20 28 33 38 42
CFM 1120 1680 2235 2795 3355 3915 4470
36 x 24
NC < < 25 30 35 40 45
CFM 735 1100 1470 1835 2200 2570 2935
48 x 12
NC < < 20 28 33 38 42
CEILING DIFFUSERS
CFM 1500 2250 3000 3750 4500 5250 6000
48 x 24
NC < < 20 28 33 38 42
PERFORATED
PERFORMANCE NOTES FOR SERIES PRTB / SPRTB
All data is tested in accordance with ANSI/ASHRAE 70-2006.
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
fpm Velocity of air stream in Feet per Minute
Pv Velocity pressure (inches of water column)
Pt Total pressure (inches of water column)
Ps Static pressure = PtPv (inches of water column)
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
PRTB/SPRTB
(by others). Model 7300 has a round black air pattern control disc permanently
luminumfaceModel7300AF
attached to the inside center of a steel perforated face. The disc provides a 360
rametype6canbeusedinsurfacemounting
horizontal air pattern. The 7300 is recommended in locations where more specific
air patterns are not required and the room configuration is not likely to change.
pplicationsbyaddingoptionalTbarPlaster
Fiberglass plenum designed to allow field installation of inlet collar (by others)
rame(TBPF) Non-removable face with round air pattern control disc attached to the face to provide a 360 horizontal air pattern
Matchingreturnavailable,7300R
Available with a steel face Model 7300 or an aluminum face Model 7300-AF
Frame type 6 can be used in surface mounting applications by adding optional T-bar Plaster Frame (TBPF)
Matching return available, 7300R
CEILING DIFFUSERS
PERFORATED
7300
98
CD122 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 7300 SPECIFICATIONS
SUPPLY PERFORATED FACE Performance Specification
INTEGRAL FIBERGLASS BACKPAN The manufacturer shall provide published performance
FIXED DEFLECTOR data. Data shall be tested in accordance to ANSI/
ASHRAE Standard 70-2006.
Fixed Steel Face Fixed Aluminum Face
DIFFUSERS
CEILING
7300-6 Surface Mounted Paint Specification
7300-6 AF Surface Mounted Process shall be anodic electro-deposition using an
anodic acrylic paint. Units shall undergo pre-treatment
Air Diffusers shall be aluminum face model 7300 or steel including a pressurized spray stage using an alkaline
face model 7300 AF manufactured by METALAIRE. Units cleaner and a de-ionized water rinse.
shall consist of 51% free area perforated face fixed to a
formed fiberglass backpan. Exposed fiberglass backpan
shall have an aluminum foil liner. The diffusers backpan
shall be factory scored to allow field installation of a tab
lock collar or spin-in fittings (by others).
Perforated holes shall be 3/16" diameter on
CEILING DIFFUSERS
PERFORATED
Unit shall generate a 360 horizontal pattern with a fixed
round pattern disk mounted on the inside face of the
perforated face.
The units shall be the size and quantity as outlined in the
plans and specifications.
Units shall be designed to integrate into the specified
ceiling system.
7300
FOIL LINED FIBERGLASS BACK PERFORATED SUPPLY DIFFUSER
Model Module Available Finishes
7300-6 T-bar Lay-in Steel Standard
7300-6 AF T-bar Lay-in Aluminum Face 01 White
24 x 24
7300R-6 T-bar Lay-in Steel Optional
7300R-6 AF T-bar Lay-in Aluminum Face 02 Satin Silver
03 Black
28 Custom Color
7
Throw 1-1-1 1-1-3 1-1-4 1-2-4 1-2-5 1-3-6 2-3-7 2-3-8 2-4-10
PERFORATED
CD124 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
PERFORMANCE NOTES FOR SERIES 7300
All data is tested in accordance with ANSI/ASHRAE 70-2006.
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
fpm Velocity of air stream in Feet per Minute
Pv Velocity pressure (inches of water column)
DIFFUSERS
Pt Total pressure (inches of water column)
CEILING
Ps Static pressure = PtPv (inches of water column)
Throw Cataloged Throw is horizontal distances in feet to the terminal velocities of 150,100 and 50fpm
with supply air temp 20 F below room air temp
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
CEILING DIFFUSERS
PERFORATED
7300
ce. designed to allow field installation of the inlet collar (by others).
CEILING
Each pattern controller can be rotated 360 to achieve 1, 2, 3 or 4-way air pattern
CEILING DIFFUSERS
Available with a steel face Model 7350 or aluminum face Model 7350-AF
PERFORATED
7350
CD126 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 7350 SPECIFICATIONS
SUPPLY PERFORATED FACE Diffusers shall be field adjustable allowing 1, 2-way
FIBERGLASS BACKPAN opposite, 2-way corner, 3, and 4-way directional
ADJUSTABLE PATTERN CONTROLLERS air patterns.
The units shall be the size and quantity outlined in the
Steel Face Aluminum Face
DIFFUSERS
plans and specifications.
CEILING
7350-6 T-bar Lay-in Units shall be designed to integrate into the specified
7350-6 AF T-bar Lay-in ceiling system.
7350-8 Tegular T-bar
Air Diffusers shall be aluminum face model 7350 or steel Performance Specification
face model 7350 AF manufactured by METALAIRE. Units The manufacturer shall provide published performance
shall consist of a 51% free area perforated face attached data. Data shall be tested in accordance to ANSI/
to a formed fiberglass backpan. Perforated holes shall ASHRAE Standard 70-2006.
be 3/16" diameter on 1/4" staggered centers. Exposed
fiberglass backpan shall have an aluminum foil liner. Paint Specification
The diffusers backpan shall be factory scored to allow Process shall be anodic electro-deposition using an
CEILING DIFFUSERS
field installation of a tab lock collar or spin-in fittings anodic acrylic paint. Units shall undergo pre-treatment
PERFORATED
(by others). including a pressurized spray stage using an alkaline
cleaner and a de-ionized water rinse.
Outer border of units shall be extruded aluminum
construction. The perforated face shall be hinged
allowing access to four adjustable pattern controllers
mounted onto the inside face of the diffuser. Face shall
be secured in place with tension spring clips. Pattern
controller blades shall be individually adjustable and
allow the discharge pattern to be adjustable from
vertical to horizontal.
7350
7350 MODEL NUMBER SPECIFICATION
FOIL LINED FIBERGLASS BACK PERFORATED SUPPLY DIFFUSER HINGED FACE
Model Module Available Finishes
7350-6 T-bar Lay-in Steel Standard
7350-6 AF T-bar Lay-in Aluminum Face 01 White
7350-8 Tegular T-bar Steel Optional
24 x 24
7350R-6 T-bar Lay-in Steel 02 Satin Silver
7350R-6 AF T-bar Lay-in Aluminum Face 03 Black
7350R-8 Tegular T-bar Steel 28 Custom Color
CD128 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
PERFORMANCE NOTES FOR SERIES 7350
All data is tested in accordance with ANSI/ASHRAE 70-2006.
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
fpm Velocity of air stream in Feet per Minute
Pv Velocity pressure (inches of water column)
DIFFUSERS
Pt Total pressure (inches of water column)
CEILING
Ps Static pressure = PtPv (inches of water column)
Throw Cataloged throw is horizontal distances in feet to the terminal velocities of 150,100 and 50fpm
with supply air temp 20F below room air temp
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
CEILING DIFFUSERS
PERFORATED
7350
7500-1 DF ( Steel Backpan & Face - Surface Mount - Drop Face - 24 x 24)
Nominal Round Neck
1
O.D. - 8 Plenum
2 Concealed Spring Latches Earthquake Tab
1 2 - Concealed
38 Hinges
1 Border 1 3
8 Pattern Controller Optional Drop Face
Perforated Face (Model 7500-1 DF) 8
Ceiling Opening = 23 3 3
4 x 23 4
Overall Diffuser = 25 3 3
8 x 25 8
DIFFUSERS
Pattern Controller 3
8
Overall Diffuser = 233 3
CEILING
4 x 234
11 34 x 11 34
CEILING DIFFUSERS
2 Concealed
Submittal:
Nominal Round Neck 7550
PERFORATED
Spring Latches O.D. - 1 Earthquake Tab
8
Perforated Supply Diffuser - Square Necks Plenum
2 Concealed
Face Mounted Adjustable Pattern Controller Spring Latches
1
38
Models: 7550-1 Steel Backpan & Face - Surface Mount
7550-1 DF Steel Backpan & Face - Surface Mount - Drop Face
7550-1 AF Steel Backpan and Aluminum Face - Surface
Pattern Mount
Controller Removable Perforated Face
3
8
7550-6 Steel Backpan & Face - Lay in T-Bar Overall Diffuser = 233 3
4 x 234
7550-6 AF Steel Backpan & Aluminum Face - Lay in T-Bar
Notes: (check if provided)
7550-6 AL Aluminum Backpan & Face - Lay in T-Bar
1. Available Finishes 2. Available Accessories 3. Available Options 4. Construction Details
Standard Finish: Round Necks: Available only in listed sizes.
Models: 7550-1 ( Steel Backpan & Face - Surface Mount)
01 White (Border only for 7500-1 Models). G3 - Round Equalizing Grid. Pattern controllers are mounted on the back
7550-1 DF ( Steel Backpan & Face -Surface Mount - Drop Face )
Optional Finish ( additional charge ): BDS - Butterfly Damper. side of the perforated face and can be
7550-1 AF ( Steel BackpanRSD
02 Satin Silver
& Aluminum Face - Surface Mount )
- Radial Shutter Damper. adjusted to 1, 2, 3 or 4 way pattern.
03 Black. Replacement Parts: Nominal Seismic tabs standard on all units.
22 (BBP) Black back pan / white face & Replacement Face Plates. 1 Pattern controller on 12 x 12 unit is a non
Square Neck Size - 4
border. 28 Custom Color. Replacement Drop Face Plate. adjustable disc on the perforated face.
2 Concealed Spring Plenum
Replacement Pattern Controller. 2 Concealed
Latches Hinges
Note: All Accessories31Shipped 3
Unattached
8 8
7500/7550
1 Border 1 Border 1 DF
8 Perforated Face Optionalare
Dropin
Face
Revision: A Date: 11/2013 Dimensions
Pattern Controller Inches Page: 2 of 2
Ceiling 3 x 23 3
Metal Industries, Inc. Clearwater, FL (727) 441 - 2651 Fax (800)Opening
865 8383 = 23www.metalaire.com
4 4 sales@metalaire.com
Overall Diffuser = 25 3 3
8 x 25 8
CD132 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
DIFFUSERS
CEILING
CEILING DIFFUSERS
PERFORATED
Submittal: 7550
Perforated Supply Diffuser - Square Necks
Face Mounted Adjustable Pattern Controller
Models: 7550-8 Steel Backpan & Face - Tegular T-Bar
7550-8 AF Steel Backpan & Aluminum Face - Tegular T-Bar
7550-8 AL Aluminum Backpan Face - Tegular T-Bar
7550-9 Steel Backpan & Face - 24 x 24 Donn ( USG ) Ceiling Grid
7500/7550
7550-8 AL ( Aluminum Backpan & Face - Tegular T-Bar )
Nominal Square
1
Neck Size - 4 Plenum
2 Concealed
2 Concealed Spring Latches Hinges T-Bar
1
38 3
8
Nominal Square
1
Neck Size - 4
Plenum 2 Concealed
Spring Latches
31 Donn Fineline
8
Air Outlets shall be steel model 7500/7550 or aluminum Air Inlets shall be steel model 7500/7550R or
face, steel backpan model 7500/7550-AF or all aluminum aluminum face, steel backpan model 7500/7550R-AF
model 7500/7550-AL manufactured by METALAIRE. or all aluminum model 7500/7550R-AL manufactured
Units shall consist of aluminum 51% free area by METALAIRE.
perforated face with 3/16" diameter perforated holes Units shall consist of aluminum 51% free area
on 1/4" staggered centers. The perforated face shall perforated face with 3/16" diameter perforated holes on
be hinged allowing access to four adjustable pattern 1/4" staggered centers. Units shall be designed for use in
controllers mounted onto the inside face of the outlet. ducted return or exhaust applications.
Face shall be secured in place with tension spring clips. The perforated face shall be hinged allowing access to the
Pattern controller blades shall be individually adjustable inside of the backpan.
7500/7550
CD134 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
Optional Dampers and Accessories OPPOSED BLADE DAMPER
DIFFUSERS
full open to full closed. Damper shall be adjusted with
the diffuser.
CEILING
a screwdriver slot accessible by opening the face of the
diffuser. EQUALIZING GRID
METALAIRE model L9 aluminum square equalizing grid
RADIAL SHUTTER DAMPER
shall be provided. Equalizing grid shall consist aluminum
METALAIRE model RSD steel round radial shutter damper blades mounting in an aluminum frame.
shall be provided. Damper shall consist of gang operated
radial blades that slide perpendicular to air flow direction. Performance Specification
The damper shall be adjusted from full open to full The manufacturer shall provide published performance
close. Damper shall be adjusted with a screwdriver slot data. Data shall be tested in accordance to ANSI/
accessible by opening the face of the diffuser. ASHRAE Standard 70-2006.
CEILING DIFFUSERS
OPPOSED BLADE DAMPER
Paint Specification
PERFORATED
METALAIRE model D3 aluminum or SD3 steel round Process shall be anodic electro-deposition using an
opposed blade type dampers shall be provided. Damper anodic acrylic paint. Units shall undergo pre-treatment
shall consist of gang operated blades that can be including a pressurized spray stage using an alkaline
adjusted from full open to full close. Damper shall be cleaner and de-ionized water rinse.
adjusted with a screwdriver slot accessible by opening the
face of the diffuser.
EQUALIZING GRID
METALAIRE model G3 aluminum round equalizing
grid shall be provided. Equalizing grid shall consist
of 1/2" x 1/2" x 1/2" aluminum cubed core mounting
7500/7550
in an aluminum frame.
CD136 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 7500 PERFORMANCE DATA
fpm Neck Velocity 300 400 500 600 700 800 1000 1200
Module Neck Size Pv .006 .010 .016 .022 .031 .040 .062 .090
CFM 60 80 100 120 135 155 195 235
DIFFUSERS
Pt .011 .019 .030 .043 .054 .072 .114 .165
CEILING
NC <15 <15 <15 17 21 25 31 36
4-Way* 1-2-3 1-2-5 2-3-5 2-3-6 3-4-6 3-4-6 4-5-7 5-6-8
6
4-Way 1-2-4 1-2-5 2-3-6 2-4-6 3-4-7 3-5-7 4-6-8 5-6-9
Throw 3-Way 1-2-4 1-3-5 2-3-6 3-4-6 3-5-7 4-5-7 4-6-8 5-6-9
2-Way 1-2-5 2-3-5 3-4-6 3-5-6 4-5-7 4-5-7 5-6-8 5-6-9
1-Way 1-2-5 2-3-5 3-4-6 3-5-7 4-5-7 4-5-8 5-6-8 5-7-9
12 x 12
CEILING DIFFUSERS
NC <15 <15 <15 20 25 30 37 43
4-Way* 1-2-5 2-3-6 3-4-7 3-5-7 4-5-8 4-6-9 5-7-10 6-7-11
PERFORATED
8
4-Way 1-2-5 2-3-6 3-4-7 3-5-8 4-6-9 4-6-9 5-7-11 6-8-12
Throw 3-Way 1-2-5 2-4-7 3-5-8 4-5-8 4-6-9 5-7-10 6-8-11 7-8-12
2-Way 2-3-6 3-4-7 4-5-8 4-6-9 5-7-9 6-7-10 6-8-11 7-9-12
1-Way 2-3-6 3-4-7 4-5-8 4-6-9 5-7-9 6-7-10 7-8-11 7-9-12
CFM 60 80 100 120 135 155 195 235
Pt .010 .019 .029 .042 .053 .070 .110 .160
NC <15 <15 <15 17 21 25 31 36
4-Way* 1-2-4 1-2-5 2-3-5 2-4-6 3-4-6 3-5-7 4-5-8 5-6-8
6
4-Way 1-2-4 1-3-5 2-3-6 3-4-7 3-4-7 3-5-7 4-6-8 5-6-9
7500/7550
Throw 3-Way 1-2-4 1-3-5 2-4-6 3-4-7 3-5-7 4-5-8 5-6-8 5-7-9
2-Way 1-3-5 2-3-6 3-4-6 3-5-7 4-5-7 4-5-8 5-6-9 5-7-9
1-Way 1-3-5 2-3-6 3-4-6 3-5-7 4-5-7 4-6-8 5-6-9 6-7-10
24 x 24
fpm Neck Velocity 300 400 500 600 700 800 1000 1200
Module Neck Size Pv .006 .010 .016 .022 .031 .040 .062 .090
CFM 165 220 275 325 380 435 545 655
DIFFUSERS
NC <15 <15 15 22 28 33 42 48
4-Way* 1-3-6 2-4-8 3-5-9 4-6-10 5-7-11 5-8-11 7-9-13 8-10-14
10
4-Way 1-3-6 2-4-8 3-5-10 4-6-11 5-7-12 5-8-12 7-10-14 8-11-15
Throw 3-Way 1-3-7 2-5-9 3-6-10 5-7-1 5-8-12 6-9-13 8-10-14 9-11-16
2-Way 2-4-8 4-6-9 5-7-10 6-8-11 7-9-12 7-9-13 8-10-14 9-11-16
1-Way 2-4-8 4-6-9 5-7-11 6-8-11 7-9-12 7-9-13 9-11-15 9-12-16
CFM 235 315 395 470 550 630 785 940
Pt .025 .044 .070 .099 .135 .177 .275 .395
CEILING DIFFUSERS
NC <15 <15 17 24 31 37 45 52
4-Way* 1-3-7 3-5-10 4-6-11 5-7-12 6-8-13 6-10-14 8-11-15 10-12-17
PERFORATED
12
4-Way 1-3-7 3-5-10 4-6-12 5-7-13 6-9-14 7-10-15 8-12-17 10-13-18
Throw 3-Way 1-3-8 3-6-11 4-7-12 6-8-13 7-10-14 8-11-15 9-12-17 11-13-19
2-Way 3-5-9 5-7-11 6-8-12 7-9-13 8-10-15 9-11-16 10-12-17 11-13-19
1-Way 3-5-10 5-7-11 6-8-13 7-10-14 8-11-15 9-11-16 10-13-18 11-14-20
24 x 24
Throw 3-Way 2-4-10 3-7-13 5-8-14 7-10-15 8-12-17 9-13-18 11-14-20 13-15-22
2-Way 3-6-11 5-8-13 7-10-14 8-11-16 9-12-17 10-13-18 12-14-20 13-16-22
1-Way 3-6-11 5-8-13 7-10-15 8-11-16 9-12-17 10-13-19 12-15-21 13-16-23
CFM 420 560 700 840 975 1115 1395 1675
Pt .040 .071 .110 .159 .214 .280 .438 .631
NC <15 <15 20 29 36 43 52 60
4-Way* 2-4-10 4-6-13 5-8-14 6-10-16 7-11-17 8-13-18 11-14-20 13-16-22
16
4-Way 2-4-10 3-7-13 5-8-16 7-10-17 8-12-19 9-13-20 11-16-22 13-17-24
Throw 3-Way 2-4-11 3-8-14 5-9-16 8-11-18 9-13-19 10-14-20 13-16-23 14-18-25
2-Way 4-7-13 6-9-15 8-11-16 9-13-18 10-14-19 12-15-21 13-16-23 15-18-25
1-Way 4-7-13 6-9-15 8-11-17 9-13-18 10-14-20 12-15-21 14-17-24 15-18-26
CD138 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 7550 PERFORMANCE DATA
fpm Neck Velocity 300 400 500 600 700 800 1000 1200
Module Neck Size Pv .006 .010 .016 .022 .031 .040 .062 .090
CFM 75 100 125 150 175 200 250 300
DIFFUSERS
Pt .013 .023 .036 .052 .071 .093 .145 .209
CEILING
NC <15 <15 <15 19 25 29 36 41
4-Way* 1-2-4 1-3-5 2-3-6 3-4-6 3-4-7 3-5-7 4-6-8 5-6-9
6x6
4-Way 1-2-4 1-3-5 2-3-6 3-4-7 3-5-7 4-5-8 4-6-9 5-7-10
Throw 3-Way 1-2-5 1-3-6 2-4-6 3-5-7 4-5-8 4-6-8 5-6-9 6-7-10
2-Way 1-3-5 2-4-6 3-5-7 4-5-7 4-6-8 5-6-8 5-7-9 6-7-10
1-Way 2-3-5 2-4-6 3-5-7 4-5-7 4-6-8 5-6-9 6-7-10 6-7-10
12 x 12
CFM 135 180 220 265 310 355 445 535
Pt .017 .031 .046 .067 .092 .121 .190 .275
NC <15 <15 <15 20 27 32 39 45
CEILING DIFFUSERS
4-Way* 1-2-5 2-3-7 3-4-8 3-5-8 4-6-9 5-7-10 6-8-11 7-8-12
PERFORATED
8x8
4-Way 1-2-5 2-4-7 3-4-8 4-5-9 4-6-10 5-7-11 6-8-12 7-9-13
Throw 3-Way 1-2-6 2-4-8 3-5-9 4-6-9 5-7-10 5-8-11 7-9-12 8-9-13
2-Way 2-4-7 3-5-8 4-6-9 5-7-10 6-7-10 6-8-11 7-9-12 8-10-14
1-Way 2-4-7 3-5-8 4-6-9 5-7-10 6-8-11 6-8-11 7-9-13 8-10-14
7500/7550
fpm Neck Velocity 300 400 500 600 700 800 1000 1200
Module Neck Size Pv .006 .010 .016 .022 .031 .040 .062 .090
CFM 75 100 125 150 175 200 250 300
DIFFUSERS
Throw 3-Way 1-2-6 2-4-8 3-5-9 4-6-10 5-7-11 6-8-11 7-9-13 8-10-14
PERFORATED
NC <15 <15 15 23 30 35 44 50
4-Way* 2-4-8 3-5-11 5-7-12 5-8-13 6-9-14 7-11-15 9-12-17 11-13-19
12 x 12
4-Way 2-4-8 3-6-11 4-7-13 6-8-15 7-10-16 7-11-17 9-13-19 11-15-21
Throw 3-Way 2-4-10 3-6-12 4-8-14 6-10-15 7-11-16 9-12-17 11-14-19 12-15-21
2-Way 3-6-11 5-8-12 6-10-14 8-11-15 9-12-16 10-12-18 11-14-20 12-15-21
1-Way 3-6-11 5-8-13 6-10-14 8-11-16 9-12-17 10-13-18 12-14-20 13-16-22
CFM 410 545 680 815 955 1090 1360 1635
Pt .023 .041 .064 .092 .126 .164 .255 .369
NC <15 <15 16 24 31 37 46 51
4-Way* 2-4-9 3-6-13 5-8-14 6-9-16 7-11-17 8-13-18 10-14-20 13-16-22
14 x 14
4-Way 2-4-10 3-7-13 5-8-15 7-10-17 8-11-18 9-13-20 11-15-22 13-17-24
Throw 3-Way 2-4-11 3-7-14 5-9-16 7-11-17 9-13-19 10-14-20 12-16-22 14-17-25
2-Way 4-7-13 6-9-14 7-11-16 9-13-18 10-14-19 12-14-20 13-16-23 14-18-25
1-Way 4-7-13 6-9-15 7-11-17 9-13-18 10-14-20 12-1521 14-17-23 15-18-26
CFM 535 710 890 1065 1245 1420 1780 2135
Pt .026 .046 .073 .104 .143 .186 .291 .419
NC <15 <15 16 24 33 39 49 53
4-Way* 2-5-11 4-7-14 6-9-16 7-11-18 8-13-19 10-14-21 12-16-23 14-18-25
16 x 16
4-Way 2-5-11 4-7-15 6-9-18 7-11-19 9-13-21 10-15-22 12-18-25 15-19-27
Throw 3-Way 2-5-13 4-9-16 6-11-18 9-13-20 10-15-21 11-16-23 14-18-26 16-20-28
2-Way 4-8-14 7-10-17 8-13-18 10-14-20 12-15-22 13-17-23 15-18-26 17-20-29
1-Way 4-8-15 7-10-17 8-13-19 10-15-21 12-16-22 13-17-24 16-19-27 17-21-29
CD140 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 7500R PERFORMANCE DATA
MODEL 7500R
fpm Neck Velocity 300 400 500 600 700 800 900 1000
Duct
Neck Size Area ft2 Ps -.023 -.041 -.064 -.092 -.126 -.165 -.209 -.259
CFM 60 80 100 115 135 155 175 195
06" .19
DIFFUSERS
NC - - - - - 13 16 19
CEILING
CFM 105 140 175 210 245 280 315 350
08" .35
NC - - - 14 18 21 24 27
CFM 165 220 270 325 380 435 490 545
10" .55
NC - - - 14 18 21 24 27
CFM 235 315 390 470 550 630 705 785
12" .79
NC - - 12 16 20 24 27 29
CFM 320 425 535 640 750 855 960 1070
14" 1.07
NC - - 14 19 23 26 29 32
CEILING DIFFUSERS
CFM 420 560 700 835 975 1115 1255 1395
16" 1.40
NC - 12 16 21 25 28 31 34
PERFORATED
CFM 520 700 870 1045 1220 1395 1570 1740
18" 1.77
NC 12 16 18 23 25 29 33 36
7500/7550
CFM 112 149 186 223 260 297 334 371 409
08 x 08 .44
NC - 13 16 19 21 24 25 27 28
CFM 178 237 296 355 414 473 532 591 651
10 x 10 .69
NC - 15 18 21 23 25 27 29 30
CFM 265 353 441 529 617 705 793 881 970
12 x 12 1.00
NC 12 16 20 23 25 27 29 31 32
CFM 366 488 510 732 854 975 1097 1219 1341
14 x 14 1.36
NC 13 18 21 24 26 28 30 32 33
CFM 485 647 808 970 1131 1293 1454 1616 1777
16 x 16 1.77
NC 15 19 22 25 28 30 32 33 35
CFM 942 1258 1589 1883 2196 2510 2823 3137 3450
22 x 22 3.36
NC 17 22 25 28 31 33 34 36 38
Ceiling Opening 23 3 3
4 x 23 4
3 x 253
Overall Diffuser = 258 8
7600/7650
Nominal
1
Round Neck O.D. - 8 Earthquake Tab
Plenum
2 Concealed Spring Latches
1
38 2 Concealed Hinges
Overall Diffuser = 23 3 3
4 x 23 4
T-Bar Module = 24 x 24
Overall Diffuser = 23 3 3
4 x 234
T-Bar Module = 24 x 24
CD142
Revision: A Date: 11/2013 Dimensions are in Inches Page: 1 of 2
Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
Metal Industries, Inc. Clearwater, FL (727) 441 - 2651 Fax (800) 865 8383 www.metalaire.com sales@metalaire.com
Submittal: 7600
Perforated Supply Diffusers - Round Neck
Adjustable Neck Mounted Pattern Controller
Models: 7600-9
7600-9 AF
Model: 7600-9 ( Steel Backpan & Face - Donn Fineline Ceiling Grid )
7600-9 AF ( Steel Backpan & Aluminum Face - Donn Fineline Ceiling Grid )
Nominal
Round Neck O.D. - 1 Earthquake Tab
8
Plenum
2 Concealed Spring Latches
2 Concealed Spring Latches
31
8
DIFFUSERS
Overall Diffuser = 23 3 3
4 x 234
CEILING
Donn Fineline Module = 24 x 24
CEILING DIFFUSERS
Models: 7600R-1 Steel Backpan & Face - Surface Mount
7600R-1 DF Steel Backpan & Face - Surface Mount - Drop Face
PERFORATED
Changing 4-Way Air Pattern
7600R-1 AF Steel Backpan & AluminumToFace - Surface Mount
Star Pattern
1 Border 1 3
Revision: A Date: 11/2013
8
Perforated Face Dimensions are
Optional inFace
Drop Inches 8 Page: 2 of 2
( Border 1 DF )
Metal Industries, Inc. Clearwater, FL (727) 441 - 2651 Fax (800)Opening
Ceiling 3 x 23 3
865 8383= 23 www.metalaire.com sales@metalaire.com
4 4
3 x 25 3
Overall Diffuser = 25 8 8
Models: 7600R-1 ( Steel Backpan & Face - 12 x 12 Surface Mount )
7600R-1 DF ( Steel Backpan & Face - 12 x 12 Surface Mount - Drop Face )
7600R-1 AF ( Steel Backpan & Aluminum Face - 12 x 12 Surface Mount )
7600/7650
1 - Concealed Nominal Round Neck
Spring Clip 1
O. D. - 8 Plenum
Earthquake Tab
1
24 2 - Concealed Hinges
Ceiling Opening 11 3 3
4 x 11 4
3 x 13 3
Overall Diffuser 13 8
8
Perforated Face
3 x 23 3
Overall Diffuser = 23 4 4
T-Bar Module = 24 x 24
Hinged, Removable
Perforated Face
Ceiling Opening 11 34 x 11 34
T-Bar Module = 12 x 12
Concealed Plenum
Spring Latches
31 2 Concealed Hinges
8
T-Bar Module = 24 x 24
CEILING
Models: 7600R-9 ( Steel Backpan & Face - 24 x 24 Donn Fineline Ceiling Grid )
7600R-9 AF ( Steel Backpan & Aluminum Face - 24 x 24 Donn Fineline Ceiling Grid ) Submittal: 7650
Nominal Round Neck
Perforated Supply Diffusers - Square Neck O.D. - 1
8
CEILING DIFFUSERS
Overall Diffuser = 25 3 3
8 x 25 8
Plenum
2 Concealed Spring Latches
2 Concealed Hinges
31/8
Nominal
1
Square Neck Size - 4
Plenum
2 Concealed Spring Latches
1 2 Concealed Hinges
38
Overall Diffuser = 23 3 3
4 x 23 4
T-Bar Module = 24 x 24
CD144 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
Submittal: 7650R
Perforated Return Diffuser - Square Neck
12 x 12 / 12 x 24 / 24 x 24 Module
Models: 7650R-8 Steel Backpan & Face - Tegular T-Bar
7650R-8 AF Steel Backpan & Aluminum Face - Tegular T-Bar
7650R-8 AL Aluminum Backpan and Face - Tegular T-Bar
7650R-9 Steel Backpan & Face - Donn Fineline Ceiling Grid
7650R-9 AF Steel Backpan & Aluminum Face - Donn Fineline Ceiling Grid
13
Submittal: 7650 Frame 2 Concealed Spring Latches
DIFFUSERS
Face Size = Module Size - 1 1 4
CEILING
Models: 7650-9 Steel Backpan & Face - Donn Fineline
Overall Diffuser =Ceiling Grid
Module Size - 41
7650-9 AF Steel Backpan & Aluminum Face - Donn Fineline Ceiling Grid
Module Size
Option: Standard Air Pattern
Star Air Pattern
Model: 7650-9 ( Steel Backpan & Face - Donn Fineline Ceiling Grid )
Models: 7650R-9 ( Steel Backpan & Face - Donn Fineline Ceiling Grid )
7650-9 AF ( Steel Backpan & Aluminum Face - Donn Fineline Ceiling Grid )
7650R-9 AF ( Steel Backpan & Aluminum Face - Donn Fineline Ceiling Grid )
Nominal
Square Neck Size 1
2 Concealed Hinges 1 -4
Neck Size = Listed Size - 4
2 Concealed Spring Latches
Frame Plenum
2 Concealed Spring Latches
3
1 13
8 8
2 Concealed Spring Latches
38
3
Removable Perforated Face
8
1
CEILING DIFFUSERS
Fully Adjustable And Reversible
Perforated Face = Module Size -1 Hinged,
4 Removable Perforated Face
Curved Blade Air Pattern Controller 1
Overall Diffuser = Module Size3- 4
Overall Diffuser = 23 4 x 23 3
4
PERFORATED
Module Size
Submittal: 7650R
Module Size = 24 x 24
7600/7650
02 Satin Silver Replacement Steel Face Plates. Frame 2 Concealed Spring Latches
28 Custom Color. 13
8
Changing
Replacement 4-Way Air
Aluminum Pattern
Face Plate.
22 (BBP) Black back pan / white face. To Star Pattern
Using Standard 4-Way
Perforated Diffuser
Face Plate 3
Optional Drop Face
Rotate Air Pattern Controller 8
1
Face Size
45 For A More Radical = Module
"Star" PatternSize - 1 4
Revision: A Date: 11/2013 Overall Diffuser = Module Size - 41 Dimensions are in Inches Page: 2 of 2
Metal Industries, Inc. Clearwater, FL (727) 441 - 2651 Fax (800) 865
Module 8383
Size www.metalaire.com sales@metalaire.com
1 Face (Available On 24 x 24
14 Nominal Face Sizes Only) 8
CEILING
22 3 3 3
4 x 22 4 OR 22 4 x 10 4
3
Ceiling Opening = 23 3 3 3 3
4 x 23 4 Or 23 4 x 11 4
3 3 3 3
Overall Diffuser = 25 8 x 25 8 Or 25 8 x 13 8
Ceiling Opening 11 3 3
4 x 11 4
CD146 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 7600/7650 SPECIFICATIONS
SUPPLY PERFORATED FACE-ROUND/ RETURN PERFORATED DIFFUSER
SQUARE NECK ADJUSTABLE NECK ROUND/SQUARE NECK
MOUNTED CURVED BLADE PATTERN
STEEL ALUMINUM FACE
CONTROLLERS
STEEL BACKPAN ALL ALUMINUM
DIFFUSERS
STEEL ALUMINUM FACE 7600R/7650R-1 Surface Mounted Steel
CEILING
STEEL BACKPAN ALL ALUMINUM 7600R/7650R-1 AF Surface Mounted Aluminum Face
7600/7650-1 Surface Mounted Steel 7600R/7650R-1 DF Surface Mounted Dropped Face
7600/7650-1 AF Surface Mounted Aluminum Face 7600R/7650R-6 T-bar Lay-in Steel
7600/7650-1 DF Surface Mounted Dropped Face 7600R/7650R-6 AF T-bar Lay-in Aluminum Face
7600/7650-6 T-bar Lay-in Steel 7600R/7650R-6 AL T-bar Lay-in Aluminum
7600/7650-6 AF T-bar Lay-in Aluminum Face 7600R/7650R-8 Tegular T-bar Steel
7600/7650-6 AL T-bar Lay-in - Aluminum 7600R/7650R-8 AF Tegular T-bar Aluminum Face
7600/7650-8 Tegular T-bar Steel 7600R/7650R-8 AL Tegular T-bar Aluminum
CEILING DIFFUSERS
7600/7650-8 AF Tegular T-bar Aluminum Face 7600R/7650R-9 Donn Fineline/Bolt Slot Steel
7600/7650-8 AL Tegular T-bar Aluminum
PERFORATED
Air Inlets shall be steel model 7600/7650R or
7600/7650-9 Donn Fineline/Bolt Slot Steel aluminum face, steel backpan model 7600/7650R-AF
Air Diffusers shall be steel model 7600/7650 or aluminum or all aluminum model 7600/7650R-AL manufactured
face, steel backpan model 7600/7650-AF or all aluminum by METALAIRE.
model 7600/7650-AL manufactured by METALAIRE. Units shall consist of aluminum 51% free area perforated
Units shall consist of a 51% free area perforated face face with 3/16" diameter perforated holes on 1/4"
with 3/16" diameter perforated holes on 1/4" staggered staggered centers. Units shall be designed for use in
centers. The perforated face shall be removable ducted return or exhaust applications.
allowing access to aluminum curved blade pattern with The perforated face shall be hinged allowing access
tension spring clips. Pattern controller blades shall to the inside of the backpan.
be individually adjustable and allow the discharge
The units shall be the size and quality outlined in the
7600/7650
pattern to be adjustable from vertical to horizontal.
plans and specifications.
Pattern controller blades shall pivot in friction mounting
retainers. Retainers shall hold the deflector blade position Units shall be designed to integrate into the specified
throughout the specified operating range of the device. ceiling systems
Metal friction wires are not acceptable.
Diffusers shall be available in 1, 2-way opposite,
2-way corner, 3, and 4-way directional air patterns.
full open to full closed. Damper shall be adjusted with Process shall be anodic electro-deposition using an
CEILING
a screwdriver slot accessible by opening the face anodic acrylic paint. Units shall undergo pre-treatment
of the diffuser. including a pressurized spray stage using an alkaline
RADIAL SHUTTER DAMPER cleaner and de-ionized water rinse.
METALAIRE model RSD steel round radial shutter damper
shall be provided. Damper shall consist of gang-operated
radial blades that slide perpendicular to air flow direction.
The damper shall be adjusted from full open to full
close. Damper shall be adjusted with a screwdriver slot
accessible by opening the face of the diffuser.
CEILING DIFFUSERS
of the diffuser.
EQUALIZING GRID
METALAIRE model G3 aluminum round equalizing grid
shall be provided. Equalizing grid shall consist of
1/2" x 1/2" x 1/2" aluminum cubed core mounting in
an aluminum frame.
METALAIRE model L9 aluminum square equalizing grid
shall be provided. Equalizing grid shall consist aluminum
blades mounting in an aluminum frame.
CD148 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
7600/7650 MODEL NUMBER SPECIFICATION
PERFORATED CEILING DIFFUSER
SUPPLY NECK MOUNTED PATTERN CONTROLLERS
Model RD Neck SQ Neck Module Available Finishes
7600/7650-1 Surface Mount 6 6x6 12 x 12 Standard
DIFFUSERS
7600/7650-1-DF Surface Mount Drop Face 6 6x6 01 White
CEILING
7600/7650-1-AF Surface Mount Aluminum Face 8 8x8 Optional
7600/7650-6 T-Bar Lay-in Steel 10 10 x 10 02 Satin Silver
7600/7650-6-AF T-Bar Lay-in Aluminum Face 12 12 x 12 24 x 24 03 Black
7600/7650-6-AL T-Bar Lay-in Aluminum 14 14 x 14 22 Black Back Pan
7600/7650-8 Tegular Steel 16 16 x 16 28 Custom Color
7600/7650-8-AF Tegular Aluminum Face 22 x 22 Available Accessories
7600/7650-8-AL Tegular Aluminum G3 Equalizing Grid
7600/7650-9 Donn Fineline / Bolt Slot Steel BDS Butterfly Damper
RSD Radial Shutter Damper
CEILING DIFFUSERS
D3 Aluminum Round Opposed Blade Damper
PERFORATED
SD3 Steel Round Opposed Blade Damper
OBD Steel Opposed Blade Damper
OBDA Aluminum Opposed Blade Damper
7600/7650
7600R/7650R-1-DF Surface Mount Drop Face 6 6x6 01 White
7600R/7650R-1-AF Surface Mount Aluminum Face 8 8x8 Optional
7600R/7650R-6 T-Bar Lay-in Steel 10 10 x 10 02 Satin Silver
7600R/7650R-6-AF T-Bar Lay-in Aluminum Face 12 12 x 12 24 x 24 03 Black
7600R/7650R-6-AL T-Bar Lay-in Aluminum 14 14 x 14 22 Black Back Pan
7600R/7650R-8 Tegular Steel 16 16 x 16 28 Custom Color
7600R/7650R-8-AF Tegular Aluminum Face 18 22 x 22 Available Accessories
7600R/7650R-8-AL Tegular Aluminum G3 Equalizing Grid
7600R/7650R-9 Donn Fineline / Bolt Slot Steel BDS Butterfly Damper
RSD Radial Shutter Damper
D3 Aluminum Round Opposed Blade Damper
SD3 Steel Round Opposed Blade Damper
OBD Steel Opposed Blade Damper
OBDA Aluminum Opposed Blade Damper
fpm Neck Velocity 300 400 500 600 700 800 1000 1200
Module Neck Size Pv .006 .010 .016 .022 .031 .040 .062 .090
CFM 60 80 100 120 135 155 195 235
DIFFUSERS
8
4-Way 2-3-6 3-4-7 3-5-8 4-6-9 4-7-9 5-7-10 6-8-11 7-9-12
Throw 3-Way 2-3-6 3-4-8 3-5-9 4-6-9 5-7-10 6-8-11 7-9-12 8-9-13
2-Way 2-3-7 3-5-9 4-6-10 5-7-11 5-8-11 6-9-12 8-10-14 9-11-15
1-Way 5-8-12 7-9-13 9-11-15 9-12-16 10-12-18 11-13-19 12-15-21 13-16-23
CFM 60 80 100 120 135 155 195 235
Pt .015 .026 .041 .060 .075 .099 .157 .229
NC <15 <15 <15 19 23 26 30 35
4-Way* 1-1-2 1-2-3 1-2-4 2-2-5 2-3-6 2-3-6 3-4-7 3-5-7
6
4-Way 1-2-5 2-3-6 3-4-6 3-5-7 3-5-7 4-5-8 5-6-9 6-7-10
Throw 3-Way 2-3-5 2-3-6 3-4-7 3-5-7 4-6-8 4-6-9 5-7-10 6-7-10
7600/7650
CD150 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 7600 PERFORMANCE DATA
fpm Neck Velocity 300 400 500 600 700 800 1000 1200
Module Neck Size Pv .006 .010 .016 .022 .031 .040 .062 .090
CFM 165 220 275 325 380 435 545 655
DIFFUSERS
Pt .017 .030 .047 .066 .090 .118 .186 .268
CEILING
NC <15 <15 <15 20 25 29 34 39
4-Way* 1-2-4 2-3-5 2-3-7 3-4-8 3-5-9 4-5-10 5-7-11 5-8-12
10
4-Way 2-4-8 3-5-9 4-6-10 5-7-11 6-9-12 7-9-13 8-10-15 9-11-16
Throw 3-Way 3-4-8 4-6-10 5-7-11 5-8-12 6-9-13 7-10-14 9-11-16 10-12-18
2-Way 3-4-9 4-6-11 5-7-13 6-9-14 7-10-15 8-11-16 10-13-18 11-14-20
1-Way 7-10-15 9-12-18 11-14-20 12-15-21 13-16-23 14-18-25 16-20-28 18-21-30
CFM 235 315 395 470 550 630 785 940
Pt .018 .033 .052 .074 .101 .133 .206 .295
NC <15 <15 15 22 27 31 36 42
CEILING DIFFUSERS
4-Way* 2-2-5 2-3-7 3-4-8 3-5-10 4-6-11 4-7-12 5-8-13 7-10-15
PERFORATED
12
4-Way 3-5-9 4-6-11 5-8-12 6-9-13 7-10-15 8-11-16 10-12-17 11-13-19
Throw 3-Way 3-5-10 4-7-12 5-8-14 7-10-15 8-11-16 9-12-17 11-14-19 12-15-21
2-Way 4-5-11 5-7-14 6-9-15 7-11-17 8-12-18 9-14-19 12-15-21 14-17-23
1-Way 8-12-18 11-15-21 14-17-24 15-18-26 16-20-28 17-21-30 19-24-33 21-26-36
24 x 24
7600/7650
2-Way 4-6-12 6-8-16 7-10-18 8-12-19 10-15-21 11-16-22 14-18-25 16-19-27
1-Way 9-14-21 13-17-25 16-19-27 17-21-30 19-23-33 20-25-35 22-27-39 25-30-43
CFM 420 560 700 840 975 1115 1395 1675
Pt .019 .033 .052 .075 .101 .132 .206 .297
NC <15 <15 17 25 30 34 39 46
4-Way* 2-3-7 3-4-9 4-5-11 4-7-13 5-8-15 6-9-16 7-11-18 9-13-20
16
4-Way 4-6-12 5-8-15 7-10-16 8-12-18 9-14-19 11-15-21 13-16-23 15-18-25
Throw 3-Way 4-7-13 6-9-16 7-11-18 9-13-20 10-15-21 12-16-23 15-18-26 16-20-28
2-Way 5-7-14 6-9-18 8-12-20 9-14-22 11-17-24 13-18-26 16-20-29 18+22-31
1-Way 10-16-24 15-20-28 18-22-31 20-24-34 21-26-37 23-28-40 26-31-44 28-34-49
fpm Neck Velocity 300 400 500 600 700 800 1000 1200
Module Neck Size Pv .006 .010 .016 .022 .031 .040 .062 .090
CFM 75 100 125 150 175 200 250 300
DIFFUSERS
8x8
4-Way 2-3-5 2-3-6 3-4-7 3-5-8 4-6-8 5-6-9 6-7-10 6-8-11
Throw 3-Way 2-3-6 2-4-7 3-5-8 4-6-8 4-6-9 5-7-10 6-8-11 7-8-12
2-Way 2-3-6 3-4-8 3-5-9 4-6-9 5-7-10 5-8-11 7-9-12 8-9-13
1-Way 4-7-10 6-8-12 8-9-13 8-10-15 9-11-16 10-12-17 11-13-19 12-15-21
CFM 75 100 125 150 175 200 250 300
Pt .017 .031 .048 .070 .095 .124 .194 .279
NC <15 <15 <15 16 21 25 30 36
4-Way* 1-1-3 1-2-4 2-2-5 2-3-6 2-3-6 2-4-7 3-5-8 4-6-8
6x6
4-Way 2-3-5 2-3-6 3-4-7 3-5-8 4-6-8 5-6-9 6-7-10 6-8-11
Throw 3-Way 2-3-6 2-4-7 3-5-8 4-6-8 46-9 5-7-10 6-8-11 7-8-12
7600/7650
CD152 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 7650 PERFORMANCE DATA
fpm Neck Velocity 300 400 500 600 700 800 1000 1200
Module Neck Size Pv .006 .010 .016 .022 .031 .040 .062 .090
CFM 210 280 345 415 485 555 695 835
DIFFUSERS
Pt .023 .040 .061 .089 .089 .159 .249 .359
CEILING
NC <15 <15 <15 20 26 29 36 42
4-Way* 2-2-5 2-3-6 3-4-8 3-5-9 4-5-11 4-6-11 5-8-13 6-9-14
10 x 10
4-Way 3-4-9 4-6-10 5-7-12 6-8-13 7-10-14 8-10-15 9-12-16 10-13-18
Throw 3-Way 3-5-9 4-6-11 5-8-13 6-9-14 7-11-15 8-11-18 10-13-18 11-14-20
2-Way 3-5-10 4-7-13 6-8-14 7-10-16 8-12-17 9-13-18 11-14-20 13-16-22
1-Way 7-12-17 10-14-20 13-16-22 14-17-24 15-18-26 16-20-28 18-22-31 20-24-34
CFM 300 400 500 600 700 800 1000 1200
Pt .023 .040 .063 .090 .123 .160 .250 .360
NC <15 <15 <15 18 23 28 34 40
CEILING DIFFUSERS
4-Way* 2-3-6 2-4-7 3-5-9 4-6-11 4-6-13 5-7-14 6-9-15 7-11-17
PERFORATED
12 x 12
4-Way 3-5-10 5-7-12 6-9-14 7-10-15 8-12-16 9-12-18 11-14-20 12-15-22
Throw 3-Way 4-6-11 5-7-14 6-9-15 7-11-17 9-13-18 10-14-19 12-15-22 14-17-24
2-Way 4-6-12 5-8-15 7-10-17 8-12-19 9-14-20 11-15-22 13-17-24 15-19-26
1-Way 9-14-21 12-17-24 15-19-27 17-21-29 18-22-31 19-24-34 22-27-38 24-29-41
24 x 24
7600/7650
2-Way 5-7-14 6-9-18 8-12-20 9-14-22 11-16-24 12-18-25 16-20-28 18-23-31
1-Way 10-16-24 14-20-28 18-23-31 20-24-34 21-26-37 23-28-29 25-31-44 28-34-48
CFM 535 710 890 1070 1245 1425 1780 2135
Pt .027 .047 .074 .108 .146 .191 .298 .428
NC <15 <15 15 23 30 35 42 50
4-Way* 2-4-7 3-5-10 4-6-12 5-7-15 6-9-17 7-10-18 8-12-20 10-15-22
16 x 16
4-Way 4-7-14 6-9-17 8-11-19 9-14-20 11-16-22 12-17-23 15-19-26 17-20-29
Throw 3-Way 5-7-15 7-10-18 8-12-20 10-15-22 12-17-24 13-18-26 16-20-29 18-22-32
2-Way 5-8-16 7-11-20 9-13-23 11-16-25 12-19-27 14-20-29 18-23-32 20-25-35
1-Way 12-18-27 16-22-32 20-25-35 22-27-39 24-30-42 26-32-45 29-35-50 32-39-55
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
fpm Velocity of air stream in Feet per Minute
Pv Velocity pressure (inches of water column)
DIFFUSERS
CD154 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
MODEL
7550R-F/7650R-F
Tag: METAL*AIRE
DIFFUSERS
designed to be installed standard T-Bar ceiling grids. The hinged
CEILING
Steel - Square
perforated Neck
face allows access to the filter (by others). These units are
available
Models: with aF 1" orSurface
7550R-1 2" filterMount
rack. - Filter Back
Steel7550R-6 F
construction Lay in T-Bar - Filter Back
7550R-8 F Tegular T-Bar - Filter Back
Hinged face allows access to the filter (by others)
7650R-1 F Surface Mount - Filter Back
7650R-6 F Lay in T-Bar - Filter Back
7650R-8 F Tegular T-Bar - Filter Back
CEILING DIFFUSERS
15 15 15 15
2 Concealed 19 16 x 19 16 Or 21 16 x 21 16 Frame
PERFORATED
Hinges
2 Concealed Spring Latches
5
1 8
22 3 x 22 3
4 4
1 3 x 23 3
1 4 Ceiling Opening 23
4 4
3 x 25 3
Overall Diffuser = 25
8 8
19 15 x 19 15 OR 21
15 x 21 15
Frame
7550R-F/7650R-F
2 Concealed 16 16 16 16
Hinges 2 Concealed Spring Latches
5
1 8 3
8
2 Concealed 19 15 x 19 15 OR 21
15
x 21
15
Hinges 16 16 16 16 Frame
2 Concealed Spring Latches
3
1 8
Overall Diffuser = 23 3 x 23 3
4 4
T-Bar Module = 24 x 24
spring clips.
The units shall be the size and quantity as outlined in the
plans and specifications.
Units shall be designed to integrate into the specified
ceiling system.
7550R-F/7650R-F
CD156 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
7550RF MODEL NUMBER SPECIFICATION
PERFORATED CEILING DIFFUSER SQUARE NECK
Model Available Neck Module Available Finishes
7550R1 F Surface Mount 20 x 20 Standard
24 x 24
7650R1 F Surface Mount 22 x 22 01 White
DIFFUSERS
Optional
CEILING
02 Satin Silver
03 Black
22 Black BP/ White Face
28 Custom Color
Available Accessories
OBD Steel Opposed Blade Damper
OBDA Aluminum Opposed Blade Damper
Available Options
CEILING DIFFUSERS
2FF 2" Filter Rack
PERFORATED
Model Available Neck Module Available Finishes
7550R6 F Tbar Layin 20 x 20 Standard
24 x 24
7650R6 F Tbar Layin 22 x 22 01 White
7550R8 F Tegular Tbar Optional
7650R8 F Tegular Tbar 02 Satin Silver
03 Black
22 Black BP/ White Face
28 Custom Color
Available Accessories
7550R-F/7650R-F
OBD Steel Opposed Blade Damper
OBDA Aluminum Opposed Blade Damper
Available Options
2FF 2" Filter Rack
8x8 CFM 130 175 220 265 310 350 400 445
CEILING
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
PERFORATED
CD158 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
applicationswheremodularairpatternadjustability
isdesired.Theperforatedfaceofthediffuser
allowsformaintainingconsistencyanduniformityin
theceilingappearance.Thecoresarespringloaded
andcanbesnappedintothediffuserframebefore
orafterinstallationwithouttheuseoftoolsand
MODEL 7900
withoutremovingthediffuserfromtheceiling.
Aluminumconstruction
Modularcorescanbefieldadjustedfor1,2,3
Model 7900 is designed for supply air distribution in applications where
and4wayairpatterns
modular air pattern adjustability is desired. The perforated face of the
diffuser allows for maintaining consistency and uniformity in the ceiling
Perforatedfaceissecuredwithspringclipsfor
DIFFUSERS
appearance. The cores are spring loaded and can be snapped into the
easyremovaltoaccessthemodularcorepattern
CEILING
diffuser frame before or after installation without the use of tools and
controllers
without removing the diffuser from the ceiling.
SquareNeck
Aluminum construction
Modular cores can be field adjusted for 1, 2, 3 and 4-way air patterns
Perforated face is secured with spring clips for easy removal to access the modular core pattern controllers
Square Neck
CEILING DIFFUSERS
PERFORATED
7900
132
SUPPLY PERFORATED MODULAR CORE Round Neck Optional Dampers and Accessories
EXTRUDED ALUMINUM SQUARE
SQUARE TO ROUND TRANSITIONS
NECK 1 TO 4 CORES STEEL
Units to have square to round transitions allowing
7900-1 Surface Mounted
installation with round ductwork.
DIFFUSERS
7900-8 Tegular T-bar METALAIRE model BDS aluminum round butterfly type
dampers shall be provided. Damper shall consist of
Air Diffusers shall be aluminum model 7900
two butterfly style blades that can be adjusted from
manufactured by METALAIRE. Units shall consist of
full open to full closed. Damper shall be adjusted with
aluminum 51% free area perforated face with 3/16"
a screwdriver slot that can be accessed through the
diameter perforated holes on 1/4" staggered centers.
face of the diffuser.
Outside border of unit shall be constructed from an
aluminum extrusion. RADIAL SHUTTER DAMPER
The perforated face shall be removable allowing access METALAIRE model RSD steel round radial shutter damper
CEILING DIFFUSERS
to the adjustable modular core pattern controllers. shall be provided. Damper shall consist of gang operated
PERFORATED
These are mounted in the neck of the diffuser. radial blades that slide perpendicular to air flow direction.
Steel modular cores are not acceptable. Face shall be The damper shall be adjusted from full open to full closed.
secured in place with tension spring clips. Diffusers Damper shall be adjusted with a screwdriver slot that can
shall be field adjustable allowing 1, 2-way opposite, be accessed through the face of the diffuser.
2-way corner, 3, and 4-way directional air patterns.
OPPOSED BLADE DAMPER
The units shall be the size and quantity outlined in the
plans and specifications.
METALAIRE model D3 aluminum or SD3 steel round
opposed blade type dampers shall be provided. Damper
Units shall be designed to integrate into the specified shall consist of gang operated blades that can be
ceiling system. adjusted from full open to full closed. Damper shall be
adjusted with a screwdriver slot that can be accessed
Square Neck Options and Accessories
7900
CD160 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
7900 MODEL NUMBER SPECIFICATION
PERFORATED MODULAR CORE CEILING DIFFUSER STEEL
Model Available Neck Module Air Pattern Available Finishes
79001 Surface Mount 6x6 12 x 12 Standard
6x6 01 White
DIFFUSERS
8x8 20 x 20 S1-1 Optional
CEILING
10 x 10 24 x 24 S4-4 02 Satin Silver
12 x 12 48 x 24 03 Black
14 x 14 24 Mill
16 x 16 24 x 24 28 Custom Color
18 x 18 48 x 24 S4-4 Available Accessories
20 x 20 24 x 24 OBD Steel Opposed Blade Damper
OBDA Aluminum Opposed Blade Damper
L9 Square / Rectangular Equalizing Grid
CEILING DIFFUSERS
TR Square to Round Transition
TR Deep Deep Square to Round Transition
PERFORATED
7900
CD162 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 7900 PERFORMANCE DATA
MODEL 7900 (4 CORE)
Vn Neck Velocity fpm 200 300 400 500 600 700
Pt .020 .045 .080 .125 .180 .245
Listed Size Side Designation A B A B A B A B A B A B
DIFFUSERS
CFM 50 75 100 125 150 175
CEILING
NC <20 <20 21 27 33 37
4-Way Throw 1-3 1-4 2-6 3-9 4-12 5-14
6x6
3-Way Throw 1-3 2-4 1-4 2-6 2-6 3-8 3-9 4-13 4-12 6-17 5-14 7-20
2-Way Throw 2-4 2-6 3-8 4-13 6-17 7-20
1-Way Throw 2-6 2-8 4-12 6-18 12-24 10-28
CFM 90 130 175 220 265 310
NC <20 <20 25 30 35 40
4-Way Throw 1-3 2-6 3-9 4-12 5-15 6-18
8x8
3-Way Throw 1-3 2-4 2-6 3-8 3-9 4-13 4-12 6-17 5-15 7-21 6-18 8-25
2-Way Throw 2-4 3-8 4-13 6-17 7-21 8-25
1-Way Throw 2-6 4-12 6-18 8-24 10-30 12-36
CEILING DIFFUSERS
CFM 140 205 275 345 415 485
NC <20 <20 26 32 37 42
PERFORATED
4-Way Throw 1-3 2-7 3-9 5-15 7-20 8-23
10 x 10
3-Way Throw 1-3 2-4 2-7 3-10 3-9 4-13 5-15 7-21 7-20 10-28 8-23 11-32
2-Way Throw 2-4 3-10 4-13 7-21 10-28 11-32
1-Way Throw 2-6 4-14 6-18 10-30 14-40 16-46
CFM 200 300 400 500 600 700
NC <20 20 28 35 40 45
4-Way Throw 1-4 2-7 4-11 6-17 8-23 9-26
12 x 12
3-Way Throw 1-4 2-6 2-7 3-10 4-11 6-16 6-17 8-24 8-23 11-32 9-26 13-37
2-Way Throw 2-6 3-10 6-16 8-24 11-32 13-37
1-Way Throw 2-8 4-14 8-22 12-34 16-46 18-52
CFM 270 405 545 680 815 950
NC <20 21 29 36 41 46
7900
4-Way Throw 1-4 3-9 5-15 8-23 10-29 11-33
14 x 14
3-Way Throw 1-4 2-6 3-9 4-13 5-15 7-21 8-23 11-32 10-29 14-41 11-33 16-47
2-Way Throw 2-6 4-13 7-21 11-32 14-41 16-47
1-Way Throw 2-8 6-18 10-30 16-46 20-58 22-66
CFM 355 530 710 885 1070 1245
NC <20 22 30 37 42 46
4-Way Throw 1-5 3-9 5-15 8-24 11-32 12-35
16 x 16
3-Way Throw 1-5 2-7 3-9 4-13 5-15 7-21 8-24 11-34 11-32 16-45 12-35 17-49
2-Way Throw 2-7 4-13 7-21 11-34 16-45 17-49
1-Way Throw 2-10 6-18 10-30 16-48 22-64 24-70
CFM 450 670 900 1120 1345 1570
NC <20 23 31 37 43 47
4-Way Throw 1-6 3-10 5-16 9-27 12-35 13-39
18 x 18
3-Way Throw 1-6 2-8 3-10 4-14 5-16 7-23 9-27 13-38 12-35 17-49 13-39 18-55
2-Way Throw 2-8 4-14 7-23 13-38 17-49 18-55
1-Way Throw 2-11 6-20 10-32 18-54 24-70 26-78
CFM 560 830 1110 1385 1665 1945
NC <20 24 32 38 44 48
4-Way Throw 2-6 3-11 6-18 9-27 12-36 13-39
20 x 20
3-Way Throw 2-6 3-8 3-11 4-16 6-18 8-25 9-27 13-38 12-36 17-51 13-39 18-55
2-Way Throw 3-8 4-16 8-25 13-38 17-51 18-55
1-Way Throw 4-12 6-22 12-36 18-54 24-72 26-78
CFM 13 19 25 32 38 44
CEILING
NC <20 <20 21 27 33 37
CFM 68 102 136 170 204 238
7x7 Throw 2-6 3-9 5-15 7-21 10-27 11-33
NC <20 <20 23 28 34 38
CFM 89 133 178 222 267 311
8x8 Throw 2-6 4-12 6-18 8-24 10-30 12-36
NC <20 <20 25 30 35 40
CFM 112 169 225 281 337 393
9x9 Throw 2-6 4-13 6-18 9-27 12-35 14-42
7900
NC <20 <20 25 31 36 41
CFM 139 208 278 347 416 486
10 x 10 Throw 2-6 4-14 6-18 10-30 14-40 16-46
NC <20 <20 26 32 37 42
CFM 168 252 336 420 504 588
11 x 11 Throw 2-7 4-14 7-20 11-27 15-43 17-49
NC <20 <20 27 33 38 43
CFM 200 300 400 500 600 700
12 x 12 Throw 2-8 4-14 8-22 12-24 16-46 18-52
NC <20 20 28 35 40 45
CD164 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
PERFORMANCE NOTES FOR SERIES 7900
All data is tested in accordance with ANSI/ASHRAE 70-2006.
DEFINITION OF UNITS
CFM Cubic Feet Per Minute (air)
fpm Velocity of air stream in Feet Per Minute
Pt Total pressure (inches of water column)
DIFFUSERS
Throw Non-isothermal horizontal throw (supply air temperature 15F colder than average room temperature);
CEILING
values are for 150, 100 and 50fpm velocities
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
CEILING DIFFUSERS
PERFORATED
7900
access to the modular cores. The cores are spring loaded and can be
CEILING
snapped into the diffuser frame before or after installation without the
use of tools and without removing the diffuser from the ceiling.
Available in steel or aluminum face with steel backpan
Modular cores can be field adjusted for 1, 2, 3 and 4-way air patterns
Face is secured with spring clips for easy removal to access to the modular core pattern controllers
Square neck
CEILING DIFFUSERS
PERFORATED
7950
CD166 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 7950 SPECIFICATIONS
DIFFUSERS
Steel- Aluminum Face Steel Backpan open to full closed. Damper shall be adjusted with a
CEILING
7950-1 Surface Mounted Steel screwdriver slot that can be accessed through the face
7950-1 AF Surface Mounted Aluminum Face of the diffuser.
7950-1 DF Surface Mounted Dropped Face RADIAL SHUTTER DAMPER
7950-6 T-bar Lay-in Steel METALAIRE model RSD steel round radial shutter damper
7950-6 AF T-bar Lay-in Aluminum Face shall be provided. Damper shall consist of gang operated
7950-8 Tegular T-bar Steel radial blades that slide perpendicular to air flow direction.
7950-8 AF Tegular T-bar Aluminum Face The damper shall be adjusted from full open to full closed.
Air Diffusers shall be steel model 7950 or aluminum Damper shall be adjusted with a screwdriver slot that can
face, steel backpan model 7950-AF manufactured be accessed through the face of the diffuser.
CEILING DIFFUSERS
by METALAIRE. OPPOSED BLADE DAMPER
PERFORATED
Units shall consist of aluminum 51% free area METALAIRE model D3 aluminum or SD3 steel round
perforated face with 3/16" diameter perforated holes opposed blade type dampers shall be provided. Damper
on 1/4" staggered centers. The perforated face shall be shall consist of gang operated blades that can be
hinged allowing access to four adjustable aluminum adjusted from full open to full closed. Damper shall be
modular core pattern controllers. These are mounted adjusted with a screwdriver slot that can be accessed
in the neck of the diffuser. Steel modular cores are not through the face of the diffuser.
acceptable. Face shall be secured in place with tension
spring clips. Diffusers shall be field adjustable allowing EQUALIZING GRID
1, 2-way opposite, 2-way corner, 3, and 4-way directional METALAIRE model G3 aluminum round equalizing grid
air patterns. shall be provided. Equalizing grid shall consist of
The units shall be the size and quantity outlined in the 1/2" x 1/2" x 1/2" aluminum cubed core mounting in
7950
EQUALIZING GRID
METALAIRE model L9 aluminum square equalizing grid
shall be provided. Equalizing grid shall consist aluminum
blades mounting in an aluminum frame.
24 x 24 S4-4
12 x 12 02 Satin Silver
14 x 14 03 Black
16 x 16 22 Black BP / White Face
28 Custom Color
Available Accessories
OBD Steel Opposed Blade Damper
OBDA Aluminum Opposed Blade Damper
L9 Square / Rectangular Equalizing Grid
CEILING DIFFUSERS
CD168 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 7950 PERFORMANCE DATA
MODEL 7950 (4 CORE)
Vn Neck Velocity fpm 200 300 400 500 600 700
Pt .020 .045 .080 .125 .180 .245
Listed Size Side Designation A B A B A B A B A B A B
DIFFUSERS
CFM 50 75 100 125 150 175
CEILING
NC <20 <20 21 27 33 37
4-Way Throw 1-3 1-4 2-6 3-9 4-12 5-14
6x6
3-Way Throw 1-3 2-4 1-4 2-6 2-6 3-8 3-9 4-13 4-12 6-17 5-14 7-20
2-Way Throw 2-4 2-6 3-8 4-13 6-17 7-20
1-Way Throw 2-6 2-8 4-12 6-18 12-24 10-28
CFM 90 130 175 220 265 310
NC <20 <20 25 30 35 40
4-Way Throw 1-3 2-6 3-9 4-12 5-15 6-18
8x8
3-Way Throw 1-3 2-4 2-6 3-8 3-9 4-13 4-12 6-17 5-15 7-21 6-18 8-25
2-Way Throw 2-4 3-8 4-13 6-17 7-21 8-25
1-Way Throw 2-6 4-12 6-18 8-24 10-30 12-36
CEILING DIFFUSERS
CFM 140 205 275 345 415 485
NC <20 <20 26 32 37 42
PERFORATED
4-Way Throw 1-3 2-7 3-9 5-15 7-20 8-23
10 x 10
3-Way Throw 1-3 2-4 2-7 3-10 3-9 4-13 5-15 7-21 7-20 10-28 8-23 11-32
2-Way Throw 2-4 3-10 4-13 7-21 10-28 11-32
1-Way Throw 2-6 4-14 6-18 10-30 14-40 16-46
CFM 200 300 400 500 600 700
NC <20 20 28 35 40 45
4-Way Throw 1-4 2-7 4-11 6-17 8-23 9-26
12 x 12
3-Way Throw 1-4 2-6 2-7 3-10 4-11 6-16 6-17 8-24 8-23 11-32 9-26 13-37
2-Way Throw 2-6 3-10 6-16 8-24 11-32 13-37
1-Way Throw 2-8 4-14 8-22 12-34 16-46 18-52
CFM 270 405 545 680 815 950
NC <20 21 29 36 41 46
7950
4-Way Throw 1-4 3-9 5-15 8-23 10-29 11-33
14 x 14
3-Way Throw 1-4 2-6 3-9 4-13 5-15 7-21 8-23 11-32 10-29 14-41 11-33 16-47
2-Way Throw 2-6 4-13 7-21 11-32 14-41 16-47
1-Way Throw 2-8 6-18 10-30 16-46 20-58 22-66
CFM 355 530 710 885 1070 1245
NC <20 22 30 37 42 46
4-Way Throw 1-5 3-9 5-15 8-24 11-32 12-35
16 x 16
3-Way Throw 1-5 2-7 3-9 4-13 5-15 7-21 8-24 11-34 11-32 16-45 12-35 17-49
2-Way Throw 2-7 4-13 7-21 11-34 16-45 17-49
1-Way Throw 2-10 6-18 10-30 16-48 22-64 24-70
CFM 450 670 900 1120 1345 1570
NC <20 23 31 37 43 47
4-Way Throw 1-6 3-10 5-16 9-27 12-35 13-39
18 x 18
3-Way Throw 1-6 2-8 3-10 4-14 5-16 7-23 9-27 13-38 12-35 17-49 13-39 18-55
2-Way Throw 2-8 4-14 7-23 13-38 17-49 18-55
1-Way Throw 2-11 6-20 10-32 18-54 24-70 26-78
CFM 560 830 1110 1385 1665 1945
NC <20 24 32 38 44 48
4-Way Throw 2-6 3-11 6-18 9-27 12-36 13-39
20 x 20
3-Way Throw 2-6 3-8 3-11 4-16 6-18 8-25 9-27 13-38 12-36 17-51 13-39 18-55
2-Way Throw 3-8 4-16 8-25 13-38 17-51 18-55
1-Way Throw 4-12 6-22 12-36 18-54 24-72 26-78
CFM 13 19 25 32 38 44
CEILING
NC <20 <20 21 27 33 37
CFM 68 102 136 170 204 238
7x7 Throw 2-6 3-9 5-15 7-21 10-27 11-33
NC <20 <20 23 28 34 38
CFM 89 133 178 222 267 311
8x8 Throw 2-6 4-12 6-18 8-24 10-30 12-36
NC <20 <20 25 30 35 40
CFM 112 169 225 281 337 393
9x9 Throw 2-6 4-13 6-18 9-27 12-35 14-42
7950
NC <20 <20 25 31 36 41
CFM 139 208 278 347 416 486
10 x 10 Throw 2-6 4-14 6-18 10-30 14-40 16-46
NC <20 <20 26 32 37 42
CFM 168 252 336 420 504 588
11 x 11 Throw 2-7 4-14 7-20 11-27 15-43 17-49
NC <20 <20 27 33 38 43
CFM 200 300 400 500 600 700
12 x 12 Throw 2-8 4-14 8-22 12-24 16-46 18-52
NC <20 20 28 35 40 45
CD170 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
PERFORMANCE NOTES FOR SERIES 7950
All data is tested in accordance with ANSI/ASHRAE 70-2006.
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
fpm Velocity of air stream in Feet per Minute
Pt Total pressure (inches of water column)
DIFFUSERS
Throw Non-isothermal horizontal throw (supply air temperature 15F colder than average room temperature);
CEILING
values are for 150, 100 and 50fpm velocities
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
CEILING DIFFUSERS
PERFORATED
7950
MODEL 3100
CEILING DIFFUSERS
ROUND
CD172 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
MODEL 900
Model 900 is an economical high performance diffuser of
aluminum construction.
360 air pattern
*AIRE
METAL
DIFFUSERS
Tag:rings for even air distribution
Concentric
CEILING
Series
Mounting holes in: outer ring 900 Submittal No: 900
Optional
Fixed Round
damper ModelDiffusers
900D
Aluminum - Multi Cone
Diffuser allows for damper control via the face with factory provided operator
Models: 900 Fixed Pattern
900D Fixed Pattern with Round Damper
CEILING DIFFUSERS
ROUND
Gasket
Z
Diffuser Cone
Mounting Screw Damper Operator Outer Mounting Cone
(3 Per Unit) Guide Hole
900
Number 900
A
Gasket
Submittal
Mounting Screw
Diffuser Cone
Damper Operator Outer Mounting Cone
(Turn to Open or Close)
Number of
Diffuser Number Damper
Diffuser Size X X YY ZZ Cones Damper Size AA
Size of Cones Size
6 10 1/8 5 13/16 1 7/8 4 6 3
6 10 1/8 5 13/16 1 7/8 4 6 3
8 8 12 12
1/8 1/8 77 13/16
13/16 2 13/16
2 3/16 5 5 8
8 44
10 10 14 14
1/8 1/8 99 13/16
13/16 2 1/2
2 1/2 6 6 10
10 55
12 16 1/8 11 7 12
12 16 1/8 11 13/16
13/16 2 13/16
2 13/16 7 12 6
6
14 18 1/8 13 13/16 3 1/8 8 14 6 1/4
14 18 1/8 13 13/16 3 1/8 8 14 6 1/4
Paint Specification
Process shall be anodic electro-deposition using an
anodic acrylic paint. Units shall undergo pre-treatment
including a pressurized spray stage using an alkaline
clear and de-ionized water rinse.
CD174 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 900 PERFORMANCE DATA
MODEL 900
fpm 200 300 400 500 600 700 800 900 1000
Neck
Size Pt 0 0.01 0.02 0.03 0.035 0.05 0.065 0.08 0.1
CFM 37 55 75 90 110 130 145 165 185
DIFFUSERS
6 Throw 3-5 3-5 3-6 3-6 4-6 4-6 4-6 5-7 5-7
CEILING
NC - - - - 20 23 25 25 30
CFM 65 100 135 165 200 230 265 300 330
8 Throw 4-6 4-6 4-6 5-7 5-8 5-8 5-8 5-9 6-10
NC - - - 20 25 25 28 30 35
CFM 105 160 210 265 315 370 420 475 525
10 Throw 4-7 5-8 5-9 5-10 6-11 6-12 7-13 7-14 7-14
NC - - - 20 25 30 30 35 35
CFM 150 230 305 380 455 535 610 685 760
CEILING DIFFUSERS
12 Throw 5-8 5-9 6-10 6-11 6-12 7-13 7-14 6-16 10-18
NC - - 20 25 25 30 30 35 35
CFM 200 310 415 520 625 730 830 935 1040
ROUND
14 Throw 6-9 7-11 8-13 9-14 11-15 12-17 13-19 15-21 18-23
NC - - 20 25 30 30 35 35 40
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
fpm Velocity of air stream in Feet per Minute
Pt Total pressure (inches of water column)
Throw Throw distance in feet at terminal velocities of 150-100fpm with a supply air temperature 20F cooler
900
than room temperature
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
cooling applications.
CEILING
Outer
Mounting
Cone F
E
ROUND
Overall Dia. H
Ceiling Opening G
J
Gasket
I (Full Open)
Horizontal
Air Pattern Outer Mounting Cone
Ceiling Line
No. 3 Cone
No. 2 Cone
Damper Access Hole
No. 1 Cone
Size Neck A B C D E F G H I J
Size
Designation Neck
Size
Designation
3006 Size
6 5 7/8 A 12 B 13 7/8 C 2 1/4 D 1 3/4 E3 F7 G
16 1/4 H
3 7/8 2 5/8 I J
3008 8 7 7/8 16 18 5/8 2 5/8 2 3 5/8 9 21 4 3/4 3 5/8
3006
3010 10
6 5 7/8
9 7/8 20
12 22 1/813 7/83 2 1/42 5/8 1 3/43 3/4 3 11 7
26 3/8
165 9/16
1/4 347/8 2 5/8
3012 12 11 7/8 24 27 3 1/2 4 3/8 5 13 31 1/2 6 3/4 4 5/8
3008 8 7 7/8 16 18 5/8 2 5/8 2 3 5/8 9 21 4 3/4 3 5/8
3014 14 13 7/8 28 31 1/4 4 1/4 4 7/16 5 5/8 15 36 7/8 8 5 1/4
3010
3016 1610 `9 7/8 32 20 36 1/222 1/84 3/4 3
15 7/8 4 1/2 2 5/86 1/8 3 3/4
17 11
42 268 7/8
3/8 5 9/16
6 4
3018 18 17 7/8 36 41 3/8 5 4 5/8 6 3/4 19 47 5/8 9 7/8 6 5/8
3012
3020 2012 1 7/8
19 7/8 40 24 42 1/4 27 5 3/8 3 1/25 1/2 4 3/87 1/2 5 21 13
52 3/8 31101/2
3/4 67 1/4
3/4 4 5/8
3024 24 23 7/8 40 44 1/4 5 3/8 5 1/2 7 1/2 25 52 3/8 10 3/4 7 1/4
3014 14 13 7/8 28 31 1/4 4 1/4 4 7/16 5 5/8 15 36 7/8 8 5 1/4
3016 16 15 7/8 32 36 1/2 4 3/4 4 1/2 `6 1/8 17 42 8 7/8 6
CD176 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 3000 SPECIFICATIONS
DIFFUSERS
from full horizontal to vertical. Units shall be aluminum
CEILING
construction. The units shall be the size and quantity as Paint Specification
outlined in the plans and specifications. Process shall be anodic electro-deposition using an
Pattern adjustment shall be accomplished by rotating anodic acrylic paint. Units shall undergo pre-treatment
the innermost cone. The inner core assembly shall including a pressurized spray stage using an alkaline
be removable for installation and for access into the cleaner and a de-ionized water rinse.
ductwork. The center cone shall include an access hole
to allow adjustment of an optional damper.
MODEL 3000-1 FLUSH FRAME
Diffuser shall have an outer frame that allows flush
CEILING DIFFUSERS
mounting to the ceiling opening.
ROUND
Diffuser shall have a dropped outer frame to move the
discharge jet away from the ceiling surface. Dropped
frame shall minimize ceiling smudging.
3000
Model Available Neck Available Finishes
Model 3000-1 Surface Mount 6 Standard
Model 3000-2 Drop Face 8 01 White
10 Optional
12 02 Satin Silver
14 03 Black
16 24 Mill
18 28 Custom Color
20 Available Accessories
24 D3 Aluminum Radial Damper
SD3 Steel Radial Damper
G3 Round Equalizing Grid
GD3 Combo Grid / Damper
BDS Butterfly Damper
RSD Radial Shutter Damper
Available Options
SC Safety Chain
Neck
CEILING
Size Ps Vert. 0.019 0.03 0.043 0.058 0.075 0.096 0.115 0.17 0.225 0.3
CFM 80 100 110 140 160 180 200 240 280 320
6 Throw 1-3 2-4 2-5 3-6 3-7 3-8 4-8 4-9 5-10 6-12
NC - - - 20 24 27 36 36 39 44
CFM 140 175 210 245 280 315 350 420 490 560
8 Throw 2-4 2-5 3-6 3-7 4-8 4-10 5-11 5-13 6-14 7-16
NC - - - 20 24 27 31 36 39 44
CFM 220 270 330 380 435 490 545 655 765 870
10 Throw 2-5 3-6 3-7 4-8 5-10 6-11 6-12 7-14 8-18 9-21
CEILING DIFFUSERS
NC - - - 21 25 28 32 37 40 45
CFM 315 390 470 550 630 710 785 940 1100 1260
ROUND
12 Throw 3-7 3-8 4-10 5-11 6-13 7-15 8-17 9-19 10-21 12-25
NC - - 20 22 26 29 33 38 41 46
CFM 425 535 640 750 855 965 1070 1285 1500 1710
14 Throw 3-8 4-9 5-11 6-13 7-16 8-18 9-20 11-13 13-26 15-30
NC - - 20 23 27 31 34 40 43 48
CFM 560 700 840 980 1120 1260 1400 1680 1960 2240
16 Throw 4-9 5-10 5-13 6-15 7-17 9-21 10-23 12-27 14-30 16-35
NC - - 21 24 28 33 36 41 44 49
CFM 710 885 1060 1240 1420 1595 1770 2120 2480 2830
3000
18 Throw 4-10 5-12 6-15 7-17 9-21 11-23 13-26 15-31 16-34 18-38
NC - - 21 25 29 34 37 42 45 51
CFM 875 1090 1310 1525 1745 1965 2180 2620 3060 3490
20 Throw 4-11 6-14 7-16 8-19 9-23 17-23 13-28 15-33 18-38 20-42
NC - 20 22 26 30 36 39 44 47 53
CFM 1255 1570 1885 2200 2510 2825 3140 3770 4395 5025
24 Throw 12-24 13-26 14-28 15-30 16-33 17-35 18-37 20-40 23-45 25-50
NC 22 26 28 31 35 38 41 47 51 55
CD178 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
PERFORMANCE NOTES FOR SERIES 3000
All data is tested in accordance with ANSI/ASHRAE 70-2006.
DEFINITION OF UNITS
1 Tabulated radial throw in feet is based on a 9' ceiling height, ambient supply air, MAX Throw @ Vt = 75fpm,
MIN Throw @ Vt = 150fpm, and the diffuser inner cones in down position for 360 horizontal air distribution pattern.
2 For vertical down protection air pattern with cooling supply air temperature 20 below room temperature
DIFFUSERS
and diffuser inner cones in up position: multiply the tabulated radial throw values by a factor of 0.80 to obtain
CEILING
vertical down projection distances at MIN and MAX (Vt) terminal velocities.
3 For vertical down projection air pattern with heating supply air temperatures 20 above room temperature and diffuser
inner cones in up position: multiply the tabulated radial throw values by a factor of 0.60 to obtain vertical down
projection distances at MIN and MAX (Vt) terminal velocities.
4 Velocity Pressure (Pv) and Static Pressure (Ps) are in inches of water.
5 Series 3000 Diffusers are tested in accordance with ASHRAE 70-2006. Sound data are calculated in accordance
with International Standard ISO 3741 comparison method. The NC values are based on a room absorption
of 10dB for sound power level (lw) re: 10-12 watts - symbol indicates NC less than 20.
6 All data is applicable for exposed for exposed duct mounting or ceiling installation.
CEILING DIFFUSERS
ROUND
3000
High induction
Aluminum / Steel- 2 Cone
/ capacity 2 cone diffuser
Can be3100-1
Models: Aluminum
adjusted for vertical -Fixed Flush
or horizontal Cone
discharge
3100A-1 Aluminum Adjustable Flush Cone
Available 3100 aluminum
3100-2 construction
Aluminum FixedorDrop
3100S steel construction
Cone
3100A-2 Aluminum Adjustable Drop Cone
Lower profile flush face, or dropped face designs are available
3100-1 S Steel - Fixed Flush Cone
30" and
3100A-1
36" unitsS are available
Steel - Adjustable Flush Cone
in non-adjustable models only
3100-2 S Steel - Fixed - Drop Cone
3100A-2 S Steel - Adjustable Drop Cone
DIFFUSERS
shall be constructed of 2 round inner cone assemblies
CEILING
flush mounting to the ceiling opening.
and a round outer frame. Diffuser shall have a fixed
horizontal pattern. Units shall be aluminum construction DROP FRAME
(Model 3100) or steel construction (Model 3100S). Model 3100A-2 Aluminum
The units shall be the size and quantity as outlined in Model 3100A-S-2 Steel
the plans and specifications. Diffuser shall have a dropped outer frame to move the
The inner core assembly shall be removable for discharge jet away from the ceiling surface. Dropped
installation and for access into the ductwork. The center frame shall minimize ceiling smudging.
cone shall include an access hole to allow adjustment of
an optional damper. Performance Specification
CEILING DIFFUSERS
The manufacturer shall provide published performance
FLUSH FRAME
data. Data shall be tested in accordance to ANSI/
Model 3100-1 Aluminum ASHRAE Standard 70-2006.
ROUND
Model 3100S-1 Steel
Diffuser shall have an outer frame that allows flush Paint Specification
mounting to the ceiling opening. Process shall be anodic electro-deposition using an
anodic acrylic paint. Units shall undergo pe-treatment
DROP FRAME
including a pressurized spray stage using an alkaline
Model 3100-2 Aluminum cleaner and a de-ionized water rinse.
Model 3100-S-2 Steel
Diffuser shall have a dropped outer frame to move
the discharge jet away from the ceiling surface.
Dropped frame shall minimize ceiling smudging.
3100
ADJUSTABLE ROUND DIFFUSER
2 FRAME
Air diffusers shall be Model 3100A (aluminum) or
3100A-S (steel) manufactured by METALAIRE. Diffuser
shall be constructed of 2 round inner cones assembly
and a round outer frame. Diffuser shall be adjustable
to allow the discharge pattern to be set from full
horizontal to vertical. Units shall be aluminum
construction (Model 3100) or steel construction (Model
3100S). The units shall be the size and quantity as
outlined in the plans and specifications.
Pattern adjustment shall be accomplished by rotating
the innermost frame. The inner core assembly shall
be removable for installation and for access into the
ductwork. The center cone shall include an access hole
to allow adjustment of an optional damper.
Available Options
SC Safety Chain
Available Options
SC Safety Chain
CD182 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 3100 PERFORMANCE DATA
MODELS 3100 3100S
fpm Neck
Vel 400 500 600 700 800 900 1000 1200 1400 1600
Pv 0.01 0.016 0.023 0.031 0.04 0.051 0.063 0.09 0.122 0.16
Ps Horiz. 0.025 0.039 0.056 0.076 0.1 0.126 0.156 0.225 0.304 0.398
DIFFUSERS
Neck
CEILING
Size Ps Vert. 0.049 0.076 0.109 0.149 0.194 0.247 0.305 0.44 0.594 0.777
CFM 75 .94 113 132 151 169 188 226 264 301
6 Throw 2-3-6 3-4-8 3-5-9 4-5-11 4-6-12 5-7-14 5-8-16 6-9-19 7-11-22 9-13-26
NC - - - - - 23 26 32 36 40
CFM 135 169 203 237 271 304 338 406 474 541
8 Throw 3-5-9 3-5-10 4-6-12 4-7-13 5-8-15 6-9-17 7-10-20 8-12-25 10-14-29 10-15-30
NC - - - 20 24 28 31 37 42 46
CFM 213 266 319 372 425 479 532 638 745 851
10 Throw 4-16-12 4-7-13 5-7-15 5-8-17 6-9-18 7-10-20 7-111-23 9-14-27 11-16-32 12-18-36
CEILING DIFFUSERS
NC - 20 23 26 29 31 34 40 45 49
CFM 308 385 461 538 615 692 769 923 1077 1231
ROUND
12 Throw 5-7-15 5-8-16 6-9-18 7-10-20 7-11-22 8-12-24 9-13-26 11-16-32 12-19-37 14-21-43
NC - 22 25 28 31 34 37 42 47 51
CFM 420 525 630 735 840 945 1050 1260 1470 1680
14 Throw 6-9-18 6-10-19 7-11-21 8-12-23 8-13-25 9-14-28 10-15-30 12-18-36 14-21-43 17-25-57
NC 22 25 28 31 34 37 39 44 48 52
CFM 550 687 825 962 1100 1237 1375 1649 1924 2194
16 Throw 7-10-21 7-11-22 8-12-25 9-14-27 10-15-30 11-17-33 12-18-37 14-22-43 17-25-50 19-29-57
NC 24 27 30 32 35 38 40 45 50 54
CFM 697 871 1046 1220 1394 1568 1743 2091 2440 2788
3100
18 Throw 8-12-24 9-13-27 10-15-32 11-16-32 12-17-35 13-19-38 14-20-43 16-24-48 18-28-55 21-32-64
NC 25 28 31 33 36 39 41 45 50 54
CFM 862 1077 1293 1508 1724 1939 2154 2585 3016 3447
20 Throw 9-13-27 10-15-30 11-16-32 12-18-36 13-20-39 14-22-43 16-24-47 19-28-56 22-33-65 24-36-72
NC 27 30 32 35 37 39 41 45 50 54
CFM 1224 1554 1885 2176 2487 2798 3109 3731 4353 4974
24 Throw 12-18-36 13-20-40 15-22-45 16-25-49 18-27-54 20-30-59 21-32-64 25-37-75 28-42-84 31-47-93
NC 28 31 33 36 38 40 42 46 50 54
CFM 1947 2434 2921 3408 3894 4381 4868 5842 6815 7789
30 Throw 17-26-51 19-29-54 27-32-64 24-35-71 26-39-78 28-42-85 31-46-92 35-53-105 39-58-117 42-63-126
NC 30 32 35 37 39 41 43 47 51 54
CFM 2808 3510 4212 4914 5616 6318 7020 8423 9827 11231
36 Throw 24-36-72 27-40-81 30-45-90 33-49-99 36-54-108 39-59-118 42-63-127 48-72-144 53-79-158 58-84-168
NC 31 33 36 38 40 42 44 48 57 54
DEFINITION OF UNITS
1 Tabulated radial throw in feet is based on a 9' ceiling height, ambient supply air, MAX Throw @ Vt = 75 fpm,
MIN Throw @ Vt = 150fpm, and the diffuser inner cones in down position for 360 horizontal air distribution pattern.
2 For vertical down protection air pattern with cooling supply air temperature 20 below room temperature and diffuser inner
DIFFUSERS
cones in up position: multiply the tabulated radial throw values by a factor of 0.80 to obtain vertical down projection
CEILING
CD184 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
MODEL 3200
Model 3200 is a heavy duty round cone ceiling diffuser featuring a wide
range of pattern adjustments. At the full vertical setting it provides
a downward projection for effective heating and cooling from high
DIFFUSERS
mounting locations. It is an excellent choice for gymnasiums, factories,
CEILING
theaters and convention halls.
Can effectively be applied for either spot heating or cooling
In the horizontal setting the unit provides tight ceiling patterns
Outer cone design guards against ceiling smudging when in horizontal position
Inner core assembly is removable for ease of installation and access to the ductwork
CEILING DIFFUSERS
ROUND
3200
Dimensions
Size A B C D E F
6 5 3/4 17 1/4 2 1/8 6 3/4 1 1/8 1 1/8
8 7 3/4 17 1/4 2 1/8 8 3/4 1 1/8 1 1/4
10 9 3/4 20 1/4 2 5/8 10 3/4 1 1/4 1 3/4
12 11 3/4 22 1/4 2 5/8 12 3/4 1 1/4 1 3/4
14 13 3/4 29 1/2 2 5/8 14 3/4 1 1/4 2 3/8
16 15 3/4 29 1/2 2 3/4 16 3/4 1 1/4 2 3/8
18 17 3/4 33 1/2 3 5/8 18 3/4 1 1/4 2 1/2
20 19 3/4 36 3/4 3 5/8 20 3/4 1 2 1/2
24 23 3/4 40 3/4 3 5/8 24 3/4 1 2 1/2
12 02 Satin Silver
14 03 Black
16 28 Custom Color
18 Available Accessories
20 G3 Round Equalizing Grid
24
Available Options
SC Safety Chain
CD186 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 3200 PERFORMANCE DATA
MODEL 3200
Neck Velocity 400 500 600 700 800 900 1000 1200 1400 1600
Velocity Pressure 0.01 0.016 0.022 0.031 0.04 0.05 0.062 0.09 0.122 0.16
CFM 80 100 120 135 155 175 195 235 275 315
Ps - H 0.004 0.007 0.010 0.013 0.017 0.022 0.027 0.039 0.052 0.069
DIFFUSERS
CEILING
Pt -H 0.014 0.022 0.032 0.044 0.057 0.072 0.089 0.128 0.175 0.228
Ps - V 0.02 0.032 0.046 0.062 0.081 0.103 0.127 0.182 0.248 0.324
Pt -V 0.03 0.047 0.068 0.093 0.121 0.153 0.189 0.272 0.371 0.484
6
NC H - - 15 16 17 19 21 24 26 29
NC V - - - - 15 16 18 22 25 29
Throw H C 1-1-3 1-2-3 1-2-4 1-2-4 2-2-5 2-3-6 2-3-6 2-4-7 3-4-9 3-5-9
Throw V C 2-4-8 4-5-11 4-6-13 5-7-14 5-8-16 6-9-19 7-10-21 8-12-25 10-15-29 11-17-33
Throw V H 0-1-3 1-2-4 1-2-4 1-2-5 2-3-6 2-3-6 2-4-7 3-4-8 3-5-10 4-6-11
CFM 140 175 210 245 280 315 350 420 490 560
Ps - H 0.003 0.004 0.006 0.009 0.011 0.014 0.018 0.026 0.035 0.046
Pt -H 0.013 0.020 0.029 0.039 0.051 0.065 0.080 0.115 0.157 0.205
CEILING DIFFUSERS
Ps - V 0.012 0.018 0.026 0.036 0.046 0.059 0.073 0.104 0.142 0.186
Pt -V 0.022 0.034 0.049 0.066 0.086 0.109 0.135 0.194 0.264 0.345
8
NC H - 16 18 20 21 23 25 28 31 34
ROUND
NC V - - + - - 17 19 24 28 32
Throw H C 1-2-3 1-2-4 2-2-5 2-3-6 2-3-7 2-4-7 3-4-8 3-5-10 4-6-12 4-7-12
Throw V C 3-6-11 5-7-14 6-8-17 6-10-19 7-11-22 8-13-25 9-14-28 11-17-33 13-19-39 15-22-45
Throw V H 1-1-4 1-2-5 1-3-6 2-3-7 3-4-8 3-4-9 3-5-9 4-6-11 4-7-13 5-8-15
CFM 220 275 325 380 435 490 545 655 765 875
Ps - H 0.003 0.004 0.006 0.009 0.011 0.014 0.018 0.026 0.035 0.046
Pt -H 0.013 0.020 0.029 0.039 0.051 0.065 0.080 0.115 0.157 0.205
Ps - V 0.012 0.018 0.026 0.036 0.046 0.059 0.073 0.104 0.142 0.186
Pt -V 0.022 0.034 0.049 0.066 0.086 0.109 0.135 0.194 0.264 0.345
10
NC H - 16 17 19 20 22 23 26 29 32
NC V - - - - - 15 17 23 27 31
3200
Throw H C 1-2-4 2-3-5 2-3-6 2-4-7 3-4-8 3-5-9 3-5-10 4-6-12 5-7-14 6-8-15
Throw V C 4-7-14 6-9-18 7-10-21 8-12-24 9-14-28 10-16-31 12-17-35 14-21-42 16-24-49 10-28-56
Throw V H 1-2-5 1-3-6 2-4-7 2-4-8 3-5-9 4-5-11 4-6-12 5-7-14 6-8-17 6-9-19
CFM 315 395 470 550 630 705 785 940 1100 1255
Ps - H 0.003 0.004 0.006 0.009 0.011 0.014 0.018 0.026 0.035 0.046
Pt -H 0.013 0.02 0.029 0.039 0.051 0.065 0.080 0.115 0.157 0.205
Ps - V 0.011 0.017 0.025 0.034 0.044 0.056 0.069 0.099 0.134 0..175
Pt -V 0.021 0.033 0.047 0.064 0.084 0.106 0.131 0.188 0.257 0.335
12
NC H - - 15 19 23 26 29 35 40 43
NC V - - - 17 20 23 27 32 37 41
Throw H C 2-2-5 2-3-6 2-4-7 3-4-9 3-5-10 4-6-11 4-6-12 5-7-15 6-9-17 7-10-19
Throw V C 4-8-17 7-10-21 8-12-25 10-15-29 11-17-33 12-19-37 14-21-42 17-25-50 19-29-58 22-33-67
Throw V H 1-2-6 1-3-7 2-4-8 3-5-10 4-6-11 4-6-13 5-7-44 6-8-17 7-10-20 8-11-23
CFM 430 535 640 750 855 960 1070 1285 1495 1710
Ps - H 0.003 0.004 0.006 0.009 0.011 0.014 0.018 0.026 0.035 0.046
Pt -H 0.013 0.020 0.029 0.039 0.051 0.065 0.080 0.115 0.157 0.205
Ps - V 0.011 0.017 0.024 0.033 0.043 0.055 0.068 0.097 0.133 0.173
Pt -V 0.021 0.033 0.047 0.064 0.083 0.105 0.13 0.187 0.255 0.333
14
NC H - 16 21 25 29 32 36 41 44 46
NC V - 15 19 23 27 30 33 38 42 45
Throw H C 2-3-6 2-4-7 3-4-9 3-5-10 4-6-12 4-6-13 5-7-14 6-9-17 7-10-20 8-12-22
Throw V C 1-3-13 2-5-21 3-7-28 5-10-33 6-13-38 7-17-43 9-21-48 13-29-57 18-33-67 24-38-71
Throw V H 1-2-5 1-3-7 2-4-8 3-5-9 4-5-11 4-6-12 4-7-13 5-8-16 6-9-19 7-11-22
Pt -H 0.013 0.020 0.029 0.039 0.051 0.065 0.080 0.115 0.157 0.205
Ps - V 0.010 0.016 0.024 0.032 0.042 0.053 0.066 0.094 0.129 0.168
Pt -V 0.02 0.032 0.046 0.063 0.082 0.104 0.128 0.184 0.251 0.328
16
NC H 15 20 25 29 33 37 40 45 48 50
NC V 16 20 24 28 31 35 38 43 47 49
Throw H C 2-3-7 3-4-8 3-5-10 4-6-12 4-7-13 5-7-15 6-8-17 7-10-20 8-12-23 9-13-25
Throw V C 2-4-14 3-6-23 4-8-30 5-11-35 6-14-40 8-18-45 10-22-50 14-30-60 20-35-69 26-40-79
Throw V H 1-2-6 1-3-8 2-4-9 2-5-11 3-6-12 4-7-14 5-8-16 6-9-19 7-11-22 8-12-25
CFM 705 885 1060 1235 1415 1590 1765 2120 2475 2825
Ps - H 0.003 0.004 0.006 0.009 0.011 0.014 0.018 0.026 0.035 0.046
Pt -H 0.013 0.02 0.029 0.039 0.051 0.065 0.08 0.115 0.157 0.205
CEILING DIFFUSERS
Ps - V 0.01 0.016 0.023 0.031 0.041 0.051 0.064 0.092 0.125 0.163
Pt -V 0.02 0.031 0.045 0.062 0.081 0.102 0.126 0.181 0.247 0.322
18
NC H - 19 23 27 31 35 38 44 50 54
ROUND
NC V - 16 21 25 30 34 37 43 49 52
Throw H C 2-4-7 3-5-9 4-6-11 4-7-13 5-7-15 6-8-17 6-9-19 7-11-22 9-13-26 10-15-28
Throw V C 2-4-14 3-6-23 4-8-32 5-11-37 6-14-43 8-18-48 10-23-53 14-32-64 20-37-74 26-43-85
Throw V H 1-1-5 1-2-8 1-3-11 2-4-12 2-5-14 3-6-16 4-8-18 5-11-21 7-12-25 9-14-28
CFM 875 1090 1310 1525 1745 1965 2180 2620 3055 3490
Ps - H 0.003 0.004 0.006 0.009 0.011 0.014 0.018 0.026 0.035 0.046
Pt -H 0.013 0.02 0.029 0.039 0.051 0.065 0.08 0.115 0.157 0.205
Ps - V 0.01 0.015 0.022 0.029 0.038 0.049 0.06 0.087 0.118 0.154
Pt -V 0.02 0.031 0.044 0.06 0.078 0.099 0.123 0.176 0.24 0.314
20
NC H - 19 25 29 34 38 41 48 53 57
NC V - - 20 25 30 35 39 45 50 52
3200
Throw H C 3-4-8 3-5-10 4-6-12 5-7-14 6-8-17 6-9-19 7-10-21 8-12-25 10-14-29 11-17-31
Throw V C 2-4-14 2-6-22 4-8-32 5-11-41 6-14-47 8-18-553 10-22-59 14-32-71 19-41-83 25-47-95
Throw V H 0-1-4 1-1-6 1-2-9 1-3-12 2-4-15 2-5-18 3-6-19 4-9-23 5-12-27 7-15-31
CFM 1255 1570 1885 2200 2515 2825 3140 3770 4400 5025
Ps - H 0.002 0.004 0.005 0.007 0.009 0.012 0.015 0.021 0.029 0.038
Pt -H 0.012 0.019 0.028 0.038 0.049 0.062 0.077 0.111 0.151 0.197
Ps - V 0.009 0.014 0.021 0.028 0.037 0.047 0.058 0.083 0.113 0.148
Pt -V 0.019 0.03 0.043 0.059 0.077 0.097 0.12 0.173 0.236 0.308
24
NC H - 19 25 31 36 40 44 50 54 56
NC V - 17 23 28 32 37 40 47 52 56
Throw H C 3-5-10 4-6-12 5-7-15 6-9-17 7-10-20 7-11-22 8-12-25 10-15-30 12-17-35 13-20-37
Throw V C 2-4-17 3-7-27 4-10-38 6-13-50 8-17-57 10-21-64 12-27-71 17-38-/8 23-50-99 30-57-109
Throw V H 1-1-5 1-2-7 1-3-10 2-3-14 2-5-18 3-6-21 3-7-23 5-10-28 6-14-33 8-18-37
CD188 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
PERFORMANCE NOTES FOR SERIES 3200
All data is tested in accordance with ANSI/ASHRAE 70-2006.
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Horizontal throw throw distance in feet at terminal velocities of 150fpm, 100fpm and 50fpm.
NC Noise criterion, sound pressure level NC ratings are based on sound power
DIFFUSERS
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
CEILING
fpm Velocity of air stream in Feet per Minute
Pv Velocity pressure (inches of water column)
Pt Total pressure (inches of water column)
Ps Static pressure = PtPv (inches of water column)
Throw Isothermal throw (supply air temperature the same as average room temperature);
values are for 150, 100 and 50fpm velocities
Ps -H static pressure horizontal
Ps-V static pressure vertical
Pt V total pressure vertical
Throw H C throw horizontal cooling
Throw V C throw vertical cooling
Throw V H vertical heating
CEILING DIFFUSERS
ROUND
3200
Normal Round
R5750
Duct Size Dim. A Dim. B Dim. C Dim. D Dim. E Dim. F Dim. G Dim. H
6 5 3/4 16 5/8 2 15/16 11 3/4 5/8 9 3/4
8 7 3/4 16 5/8 2 15/16 11 3/4 5/8 9 3/4
10 9 3/4 22 3/16 3 5/16 17 1.0 7/8 14 7/8
12 11 3/4 22 3/16 3 5/16 17 1.0 7/8 14 7/8
14 13 3/4 29 1/4 4 3/16 22 1.0 7/8 19 7/8
16 15 3/4 29 1/4 4 3/16 22 1.0 7/8 19 7/8
CD190 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES R5750 SPECIFICATIONS
DIFFUSERS
and a round outer frame. Diffuser shall have a fixed
CEILING
Paint Specification
horizontal pattern. The units shall be the size and quantity
as outlined in the plans and specifications. Process shall be anodic electro-deposition using an
anodic acrylic paint. Units shall undergo pre-treatment
Round face panel shall be removable to allow access including a pressurized spray stage using alkaline
to the round outer frame. Diffuser shall be designed for cleaner and a de-ionized water rinse.
surface mounting applications and have an outer frame
that allows flush mounting to the ceiling opening.
CEILING DIFFUSERS
R5750 MODEL NUMBER SPECIFICATION
ROUND PANEL FACE DIFFUSER
ROUND
Model Available Neck Available Finishes
R5750-1 Steel 6 Standard
R5750-AF-1 Aluminum Face/ Steel Backpan 8 01 White
R5750-AL Aluminum 10 Optional
12 02 Satin Silver
14 03 Black
16 28 Custom Color
Available Accessories
R5750
D3 Aluminum Radial Damper
SD3 Steel Radial Damper
G3 Round Equalizing Grid
GD3 Combo Grid / Damper
BDS Butterfly Damper
RSD Radial Shutter Damper
Available Options
SC Safety Chain
CD192 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
PERFORMANCE NOTES FOR SERIES R5750
All data is tested in accordance with ANSI/ASHRAE 70-2006.
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Nk Vel Neck velocity is the airstream velocity in the duct just before it reaches the supply outlet;
measured in Feet per Minute
DIFFUSERS
Pv Velocity pressure (inches of water column)
CEILING
Pt Total pressure (inches of water column)
Ps Static pressure = PtPv (inches of water column)
Throw Isothermal throw (supply air temperature the same as average room temperature);
values are for 150, 100 and 50fpm velocities
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
CEILING DIFFUSERS
ROUND
R5750
The MS series of variable volume diffusers provides both accurate and individual control for
heating and cooling without the use of an air terminal unit. By combining the performance of
a diffuser with the function of an air terminal unit, VAV control strategies can be employed at
a reduced first cost. Better comfort is obtained by the ability to move the zone control to the
diffuser level. Aesthetics are not sacrificed with the sleek, plaquefaced look.
controls, mounted just above the plaque, consist of a single sensor and PAGE 195
mechanical mechanism to generate the flow controller.
Model MSCVH is for heating and cooling applications. The MSCVH is the
same as the MSC with three added thermal controllers utilizing input from PAGE 195
four thermal sensors.
Model MSEHC is for heating and cooling applications and uses a duct sensor
to communicate with a remote mounted thermostat and an electronic motor PAGE 200
to operate the modulating device.
CD194 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
MSC ProductDescription
TheMSC(coolingonly)andtheMSCVH(heating/cooling)are
MODEL MSC/MSCVH
thermallypoweredvariablevolumeairdiffuserswhichare
completelyself poweredandselfcontained. Thethermal
controlactuatorsareboththeroomthermostatsandthe
dampermotor.
The MSC (cooling only) and the MSCVH (heating/cooling)
Tosensetheaverageroomtemperatureacontinuoussample
are thermally powered variable volume air Asmall
ofroomairisinducedupandaroundtheefacepanel. diffusers which
amountofsupplyairisdivertedthroughanorificeagainstanThe thermal
are completely selfpowered and selfcontained.
DIFFUSERS
control actuators are both the room thermostats and the
inductionwingthenbackintotheprimaryairpathcreating
CEILING
justenoughnegativepressuretoinduceasampleof
damper motor. To sense the average room temperature,
secondaryroomairaroundtheedgeofthefacepanel,
a continuous sample of room air is induced up and around the face panel. A small amount of
throughtheinductiontroughandacrossthethermal
supply air is diverted through an orifice against an induction wing then back into the primary air
actuators. Thediffusiondamperismechanicallyopenedand
path, creating just enough negative pressure to induce a sample of secondary room air around
closedbythethermalactuatorstovarytheflowofwarm/cool
the edge of the face panel, through the induction trough and across the thermal actuators. The
airintothespace.
diffusion damper is mechanically opened and closed by the thermal actuators to vary the flow of
Eachthermalactuatorisapreciselycalibratedthermostat
warm/cool air into the space.
Thermalcontrolactuatorsallowheatenergytotransform
intomechanicalenergythroughthemovementofa
Each thermal actuator is a precisely calibrated thermostat
stainlesssteelpiston
Thermal control actuators allow heat energy to transform into mechanical energy through the movement of a stainless
Thethermalactuatorisasmallbrasscylindercontaining
steel piston
petroleumbasedwax. Thewaxexpandswhenheated,
VAV DIFFUSERS
drivingthepistonout.
The thermal actuator isAtorsionspringreturnsthepiston
a small brass cylinder containing petroleum based wax. The wax expands when heated, driving the
asthewaxcoolsandretracts.
piston out. A torsion spring returns the piston as the wax cools and retracts
Thermalactuatorsareusedinavarietyofthermostatic
Thermal actuators
applications. are used in a variety of thermostatic applications. Typical applications include automotive controls,
Typicalapplicationsincludeautomotive
aerospace, marine, medical and many more
controls,aerospace,marine,medicalandmanymore.
MSC/MSCVH
165
166
CD196 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES MSC SPECIFICATIONS
DIFFUSERS
CEILING
steel construction. Units shall be square with a formed
Paint Specification
backpan and a flat face panel. The face panel shall
Process shall be anodic electro-deposition using an
project no more than 1/4" below the ceiling grid or
anodic acrylic paint. Units shall undergo pre-treatment
surface. The diffuser shall have the same appearance
including a pressurized spray stage using an alkaline
from the face regardless of the inlet size. Each diffuser
cleaner and a de-ionized water rinse.
damper shall consist of an aluminum extruded disc to
provide a variable unobstructed 360 horizontal discharge
for maximum Coanda effect and superior induction. All
diffusers shall have a temperature adjustment scale with
indicators that range from 7078F. The initial set point
shall be factory set at 74F. No tools shall be required.
VAV DIFFUSERS
Model MSC cooling diffuser shall utilize one thermal
actuator to provide VAV room temperature control
for cooling.
Model MSCVH heating and cooling diffuser shall utilize
four thermal actuators to provide both heating and
cooling control. The diffuser is equipped with two room-
temperature-sensing thermal actuators and two heating
change-over thermal actuators. The room temperature
settings for heating and cooling shall be separately
adjustable. One room actuator shall sense temperature
and vary the supply air when cooling. The second actuator
shall sense room temperature and vary the supply air
MSC/MSCVH
when heating. The heating change-over actuators shall
be factory set to engage heating mode when supply air
temperature rises above 78F and will return to cooling
mode when supply air temperature falls below 68F.
CD198 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES MSC PERFORMANCE DATA
MODEL MSC/MSCVH
Throw @ Max. CFM Throw @ 25% of CFM
Inlet SP NC@
Listed Size in. WG Max. CFM Vt50 Vt100 Vt150 Vt50 Vt100 Max. CFM
.05 85 5 3 1 3 1
DIFFUSERS
.10 120 6 3 2 3 2 0.20
CEILING
6 .15* 150 7 4 2 4 3 2A
.20 170 8 5 3 6 4 28
.25 220 8 6 5 7 4 33
.05 160 6 4 2 4 2
.10 225 8 5 3 5 3 20
8 .15 275 9 5 4 6 4 25
.20 320 10 6 5 8 5 29
.25 355 12 7 6 9 6 33
.05 250 7 4 3 5 3
VAV DIFFUSERS
.10 355 9 5 4 6 4 22
10 .1s 450 11 6 5 7 4 26
.20 500 12 7 6 8 5 29
.25 580 13 8 7 10 7 32
.05 365 8 5 4 6 4
.10 520 11 7 6 8 5 23
.1s 650 12 7 6 8 6 27
12
.20 740 14 8 7 10 7 32
.25 820 15 10 9 11 8 36
30 890 17 11 10 12 9 40
MSC/MSCVH
PERFORMANCE NOTES FOR SERIES MSC
All data is tested in accordance with ANSI/ASHRAE 70-2006.
DEFINITION OF UNITS
CFM Cubic Feet Per Minute (air)
fpm Velocity of air stream in Feet Per Minute
Pt Total pressure (inches of water column)
Throw Non-isothermal horizontal throw (supply air temperature 15F colder than average room temperature);
values are for 150, 100 and 50fpm velocities
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
mode, as well as the cooling mode. Automatic changeover from heating to cooling is standard.
CEILING
The diffuser is designed to maintain Coanda effect (draft free) of discharge air along the ceiling,
providing a sustained velocity throughout the volume range. Operating the diffuser from an
individual wall-mounted thermostat enables users to choose their own desired comfort control
from desk top level, rather than a stratified ceiling level.
Excellent choice for reception areas, offices, conference rooms and buildings with east/west exposure
Economical solution to overcooling or overheating issues in a building that does not warrant a fullblown zoning
or BAS system.
Wall mounted thermostatic control
Powerful, low voltage actuator
VAV DIFFUSERS
One 40VA transformer will power a single Master (MSEHCM) and up to 19 slave units (MSEHCS)
One 75 VA transformer will power a single Master (MSEHCM) and up to 36 slave units (MSEHCS)
MSE-HC
(Master / Slave)
(Master / Slave)
CD200 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES MSEHC VAV SMART ZONE DIFFUSER SPECIFICATIONS
DIFFUSERS
backpan and a flat face panel. The face panel shall
CEILING
Paint Specification
project no more than 1/4" below the ceiling grid or
surface. The diffuser shall have the same appearance Process shall be anodic electro-deposition using an
from the face regardless of the inlet size. anodic acrylic paint. Units shall undergo pre-treatment
including a pressurized spray stage using an alkaline
The diffuser shall include an integral modulating disk cleaner and a de-ionized water rinse.
that continually regulates the volume of supply air in
response to the wall mounted thermostat. Diffusers
dependent on integral air induction ceiling located
sensors or set point adjustment methods other than from
wall mounted thermostats shall not be acceptable.
To ensure finite control of temperature by modulation,
VAV DIFFUSERS
the electric 24Vac actuators shall be a drive-open, drive
closed motor on the electrically driven units. Actuators
that incorporate an expanding material which only drives
the unit open when subjected to heatcausing electrical
current, requiring a spring return mechanism to force the
diffuser to a closed position shall not be acceptable.
The electronic modulating wallmounted thermostatic
control shall be either a 2 to 10Vdc or floating point. All
field wiring, materials and labor shall be supplied and
installed by others.
MSE-HC
MSE-HC MODEL NUMBER SPECIFICATION
THERMAL PLAQUE DIFFUSER
HEATING AND COOLING ELECTRONICALLY CONTROLLED
Model Neck Size Module Available Finishes
MSE-HC-6 T-bar Lay-in 6 Standard
12 x 12
MSE-HC-8 Tegular Lay-in 8 01 White
MSE-HC-9 Donn Fineline / Bolt Slot 6 Available Accessories
8 BAF-1 3-Way (One Baffle)
10 24 x 24 BAF-2 2-Way (Two Baffles)
12 BAF-3 1-Way (Three Baffles)
14
MSE-HC-M Pt .009 .011 .017 .025 .034 .044 .057 .070 .100 .135
CEILING
MSE-HC-S
Throw 1-1-2 1-1-4 1-2-4 1-3-5 2-3-6 2-4-7 3-4-8 3-4-9 4-5-11 4-6-11
6
NC <15 <15 <15 <15 <15 <15 17 21 28 34
CFM 105 140 175 210 245 280 315 350 420 490
MSE-HC-M Pt .011 .018 .028 .040 .055 .072 .091 .112 .162 .220
MSE-HC-S
Throw 1-2-4 2-3-6 2-4-7 3-4-9 3-5-10 4-6-11 4-6-12 5-7-13 6-9-14 7-10-15
8
NC <15 <15 <15 <15 <15 17 21 25 32 38
CFM 165 220 275 330 385 440 495 550 660 770
MSE-HC-M Pt .017 .029 .043 .060 .082 .108 .136 .168 .243 .331
MSE-HC-S
Throw 2-3-7 3-4-8 3-5-10 4-6-12 5-7-13 5-8-14 6-9-15 7-10-16 8-12-18 10-13-19
10
VAV DIFFUSERS
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
fpm Velocity of air stream in Feet per Minute
Pv Velocity pressure (inches of water column)
Pt Total pressure (inches of water column)
Throw Horizontal distances in feet to the terminal vel of 150 , 100 and 50fpm with supply air temp 20F below room air temp
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
CD202 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
CEILING DIFFUSER
ACCESSORIES
DIFFUSERS
CEILING
900D
PAGE 205
Butterfly Damper for Model 900 Diffuser
BDS
PAGE 205
Steel Butterfly Damper
CEILING DIFFUSER
ACCESSORIES
D3
PAGE 205
Aluminum Radial Opposed Blade Damper
SD3
PAGE 206
Steel Radial Opposed Blade Damper
RSD
PAGE 206
Radial Shutter Damper
D5/D7
PAGE 206
Opposed Blade Damper
OBD
PAGE 207
Steel Opposed Blade Damper
L9
PAGE 207
Square/Rectangular Equalizing Grid
CEILING DIFFUSER
ACCESSORIES
G3
PAGE 207
Round Equalizing Grid
GD3
PAGE 208
Round Equalizing Grid
TBPF
PAGE 208
T-bar Plaster Frames permit installation
TR/TR DEEP
PAGE 208
Deep Square to Round Transitions
CD204 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
Bladesadjustedthroughdiffuserface
Model900Dopposedbladedamperformodel900
Dampersuppliedwithmountinghardware
Butterflystylebladesforsizes6to12
8bladeradialstyleforsize14
Bladesadjustedthroughdiffuserface
900D ProductDescription
Dampersuppliedwithmountinghardware
MODEL 900D
900D ProductDescription
Model900Dopposedbladedamperformodel900
Model900Dopposedbladedamperformodel900
Butterflystylebladesforsizes6to12
Butterflystylebladesforsizes6to12
opposed
Model 900D blade damper for model 900
8bladeradialstyleforsize14
8bladeradialstyleforsize14
Butterfly style blades for sizes 6" to 12"
Bladesadjustedthroughdiffuserface
Bladesadjustedthroughdiffuserface
DIFFUSERS
8 blade radial style for size 14"
Dampersuppliedwithmountinghardware
Dampersuppliedwithmountinghardware
CEILING
Blades adjusted through diffuser face
900D & 900D* Models
Damper supplied with mounting hardware BDS ProductDescription
Damper
Sizes X Y Z
6 5 15/16 5 5/8 3
ModelBDSbutterflydamper
8 7 15/16 7 5/8 4
Twobutterflystyleblades
BDSProductDescription 10 9 15/16 9 5/8 5
Bladesareadjustedthroughthediffuserface
12 11 15/16 11 5/8 6
Twobutterflystyleblades
CEILING DIFFUSER
MODEL BDS BDS ProductDescription Bladesareadjustedthroughthediffuserface
ACCESSORIES
BDS ProductDescription
ModelBDSbutterflydamper
Twobutterflystyleblades
Model BDSbutterfly damper Diffuser Neck
BDS Dimension
D3 ProductDescription15 14 3/4 7
16 15 3/4 7 1/2
ModelD3radialopposedbladedamper
MODEL D3
D3 ProductDescription
Foruseinrounddiffusers
Designedtoprovidefullradialvolumecontrol
D3 ProductDescription ModelD3radialopposedbladedamper
resultinginlowerthannormalpressurelosses
Model D3 radial opposed blade damper
ModelD3radialopposedbladedamper
Foruseinrounddiffusers
Overlappingbladedesignensurespositiveshut
For use in round diffusers
Foruseinrounddiffusers Designedtoprovidefullradialvolumecontrol
offwhenrequired
Designed to provide full radial volume control resulting
Overlappingbladedesignensurespositiveshut
offwhenrequired8 7 7/8 1 1/4 3 3/4 5 1/4
when required
ModelD3radialopposedbladedamper
offwhenrequired 10 9 7/8 1 1/4 3 3/4 6
MODEL RSD
Model RSD radial shutter damper
Cost effective alternative to butterfly style damper
Design permits very precise damper control and does not
MODEL D5/D7
Model D5/D7 opposed blade damper for 5000 and 7000
For use with Series 5000, D5, and Series 7000, D7.
Aluminum construction, D5A/ D7A
CD206 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
MODEL OBDA/OBD
Model OBDA/OBD square/rectangular opposed blade damper
Tapered blades set in a U-channel frame
L9 ProductDescription
DIFFUSERS
Opposed blades on 1" centers
CEILING
Screwdriver slot operator
ModelL9 Square/RectangularEqualizingGrid
Aluminum construction, OBDA
Designedtoprovideuniformairflowinbranch
Steel construction, OBD
ducts
Pretensionedbladesadjustindividually
Aluminumconstruction
MODEL L9
CEILING DIFFUSER
ACCESSORIES
Model L9 Square/Rectangular Equalizing Grid
Designed to provide uniform airflow in branch ducts
Pre-tensioned blades adjust individually
Aluminum construction
G3 ProductDescription
ModelG3RoundEqualizingGrid
Aluminumconstruction
Availableinsizesfrom6to24
MODEL G3
Model G3 Round Equalizing Grid
Aluminum construction
Available in sizes from 6" to 24"
Diffuser Neck Diameter
6 8 10 12 14 16 18 20 24
G3 Outside Diameter
5 3/4 7 3/4 9 3/4 11 3/4 13 3/4 15 3/4 17 3/4 19 3/4 23 3/4
MODEL GD3
Model GD3 Round Combination Grid and Damper
For use with all diffusers
Aluminum construction
DIFFUSERS
CEILING
TBPF ProductDescription
CD208 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
LINEAR DIFFUSERS AND GRILLES
The METALAIRE line of Linear Diffusers and Grilles is designed to satisfy the most discerning
architect's design concept without compromising engineering performance. Linear slot diffusers
and grilles can be divided into three categories: Formations, Linear Slot Diffusers and Linear
Bar Grilles.
Linear Bar Grilles are engineered for supply and return air distribution
in heating and cooling applications and are designed for sidewall,
PAGE 129
floor, sill and ceiling installation. Linear bar grilles are available in
straight, continuous and curved applications.
FORMATIONS ACCESSORIES
LINEAR DIFFUSERS
FORMATIONS
METALAIRE Formations is designed to integrate with all ceiling systems. Formations are
available in both straight and curved sections to satisfy the most demanding architectural
designs. The Formations line of architectural diffusers is an excellent choice for offices,
libraries, airports, community buildings, restaurants, lobbies and retail spaces.
Formations Linear
The Formations series of linear diffusers is designed for ceiling and sidewall
installation and is suitable for both commercial and residential applications.
Formations can also be curved for ceiling or sidewall applications.
FAL Formations continuous linear
LDG2 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
Formations Tee System
The Formation Tee System is designed for ease of installation and can be
easily removed and relocated if needed.
FTS Formations and plenum for Tee System
FTSBI Formations and plenum for Bolt Slot Systems Insulated PAGE 18
Formations Integra
The Integra series is designed to lay in an acoustical T-bar or hard ceiling. The
Integra incorporates the ceiling material as the face of the diffuser blending it
into the ceiling design.
FAI Formations Integra supply
LINEAR DIFFUSERS
FAIR Formations Integra return PAGE 55
AND GRILLES
Formations Plenums
The UPFAL/UPFALC series plenum is designed for the FAL/FALC series
Formation to connect the diffuser to the ducted supply or return.
UPFAL Formations plenum Standard
Formations Accessories
FAM Formations miter corner
LINEAR DIFFUSERS
FAMSA Formations special angle
FORMATIONS
FAR Formations perforated return shield
Quick
installa$on
w
Quick installation with state of the art mounting hardware
ith
he
rt
oun$ng
hardware
hardware
AND GRILLES
hardware
Can
Can
bCan
e
Can
e
bc urved
be curved
bce
urved
to
pto
curved
toroduce
roduce
tp
produce
o
produce
a
aaat
ceiling
afat
fflat,
ace,
at
ace,
concave
fcace,
oncave
concave
concave
oroconvex
r
or
or
face unit
convex
convex
convex
face
face
fuace
nit
unit
unit
LINEAR DIFFUSERS
FORMATIONS
4 4 4
LDG4 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
LINEAR DIFFUSERS
AND GRILLES
S Z WT Border H
Model Slot Width Border Width Border Width Width Height
FAL-10 S
1 Z
1 3/8 Width
5 1/8 WT
6 15/16
2 3/4
FAL-15 Slot
1 1/2Border
1 7/8Border
7 1/8Border
8 15/16 H
2 3/4
Model
FAL-20 Width
2 Width
2 3/8 Width
9 1/8 Width
10 15/16 Height
2 3/4
LINEAR DIFFUSERS
FAL-10
1
2 1/2 1
3/8
2 7/8 5
1/8
11 1/86
15/16
12 15/162
3/4
3 3/16
FORMATIONS
FAL-25
FAL-15
FAL-30 1
1/2
3 1
7/8
3 3/8 7
1/8
13 1/88
15/16
14 15/162
3/4
3 5/8
FAL
MODEL FALC
air
distribu$on
systems.
Forma$ons
is
suitable
for
both
commercial
and
residen$al
applica$ons.
Numerous
frame
sFALC
The Formations tyles
series
allow
is
the
specier
for
engineered to
m ake
return or exhaust
supply,
an
aair esthe$c
statement.
distribution in heating, cooling and ventilating applications. It is
Available
w ith
designed for ceiling straight
or
combo
and sidewall pa[ern
and works equally well in
installation,
controllers
variable-volume in
moraximum
24
increments
constant-volume air distribution systems. Formations
Standard
slot
widths
of
1,
1.5,
2residential
is suitable for both commercial and applications.
,
2.5
and
3
Numerous
frame styles allow the specifier to make an aesthetic statement.
Available
in
single
sec$on
lengths
up
to
96
Available with straight or combo pattern controllers in maximum 24" increments
Available
with
one
or
two
slots
Standard slot widths of 1", 1.5", 2", 2.5" and 3"
Available
in
2
border
congura$ons
Available in single section lengths up to 96"
Standard
concealed
moun$ng
Available with one or two slots
Can
be
curved
to
produce
a
at
face,
concave
or
Available in 2 border configurations
convex
face
unit
LINEAR DIFFUSERS
AND GRILLES
LDG6 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
Two Slot Formations
LINEAR DIFFUSERS
Model Formation Unit Slot Width W (width) B Border (width) H Height
AND GRILLES
FALC-10 1 5 5/8 1 3/8 2 3/4
FALC-15 1 1/2 7 5/8 1 7/8 2 3/4
FALC-20 2 9 5/8 2 3/8 2 3/4
FALC-25 2 1/2 11 5/8 2 7/8 3 3/16
FALC-30 3 13 5/8 3 3/8 3 5/8
LINEAR DIFFUSERS
FORMATIONS
FALC
Radius
Inside Rail Rail
AND GRILLES
Inside Rail
Rail
Outside Rail Outside Rail
FORMATIONS
Radius
RadiusONE SLOT TWO SLOT
CONCAVE CURVE
Radius
Radius
Radius Radius
LDG8 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
Radius
Radius Radius
Inside Rail
Radius
Radius
Outside Rail
CONVEX CURVE
ONE SLOT TWO
ONE SLOT CONCAVE TWO SLOT CONCAVE
ONE SLOT CONCAVE TWO SLOT CONCAVE
Radius
Radius
Radius Radius
Radius Radius
LINEAR DIFFUSERS
AND GRILLES
ONE SLOT CONVEX TWO SLOT CONVEX
ONE SLOT CONVEX TWO SLOT CONVEX
ONE SLOT CONCAVE TWO SLOT
LINEAR DIFFUSERS
OUTSIDE DOWN available, contact your METALAIRE representative.
DOWN
FORMATIONS
METALAIRE representative. Radius
FAL/FALC CURVED
NOTE: Cu
available,
INSIDE OUTSIDE DOWN METALAIR
CONCAVE CONVEX CEILING FLAT
LDG10 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
24
MOUNTING CLIP DETAILS
MOUNTING CLIP DETAILS
24
MOUNTING CLIP DETAILS
24
MOUNTING CLIP DETAILS
24
MOUNTING CLIP DETAILS
1/2"
F1F1Mounting
MOUNTINGHardware HARDWAREis 2"
F1 1/2"1 3/16"
typically
Mounting used with
F1 MOUNTING
hardware F1 isBorder
HARDWARE
typically 2"
F1 1 3/16"
Aused
or Border
with
Mounting Border CA for
or standard
Border
hardware HARDWARE C
F1 is typically
1/2"
F1hard
for MOUNTING
ceiling installations, when
2"
1 5/16" 1/2"
5/8"
used gypsum
with Border Aboard
F1 MOUNTING HARDWAREor Borderceiling.
C F1 2" 1 3/16"
mounting
Mounting
for to a standard
hardware
hard ceiling F1 is5/8"
installations, gypsum
typically
when F1 1 15/16" 1 3/16"
13/16"
board
used ceiling
with
Mounting is
Border
hardwarerequired.
A or
F1 Border
is C
typically
mounting to a standard 5/8" gypsum
used
for with
hard Border
ceiling 13/16"
1 15/16"
board ceiling A or Borderwhen
is installations,
required. C
for hard ceiling
mounting installations,
to a standard when
5/8" gypsum F2 1 5/16" 1/2"
F2 MOUNTING
mounting
board to aisstandard
ceiling HARDWARE
required. 5/8" gypsum
1 13/16"
F2 1 13/16" 1/2"
F2 F2
board
The MOUNTING
ceiling is HARDWARE
is required.
hardware used to mount a
hard
The ceiling
F2 over the
hardware face to
isHardware
used of mount
BorderaA. F2 2" 1/2"
1 7/8"
F2 F2Mounting
MOUNTING HARDWARE 1/2"
hard ceiling over the face of Border A. F2 2"
LINEAR DIFFUSERS
F2
isThe MOUNTING
used to mount HARDWARE
a hard 1 7/8"
F2 hardware is used to mount a Trim By Others
AND GRILLES
ceiling
The F2
hard over the
hardware
ceiling over face
is used
the ofofmount
face to BorderaA. 1 5/16"
2" 1 7/8"
Trim By Others
hard ceiling
Border A.over the face of Border A. 2"
1 5/16"
1 15/16" 1 7/8"
Trim By Others
1 15/16"
1 5/16"
F3
F3 MOUNTING HARDWARE Trim By Others 2"
1 5/16"
F3 1 15/16"
F3mounting
F3 MOUNTING HARDWARE
hardware is used 2"
1 15/16"
to
F3 mount Border A for sidewall
F3mounting
MOUNTING
applications.
hardware is used
HARDWARE F3
2" 2"
to
F3mount Border A for
MOUNTING sidewall
HARDWARE F3
F3 mounting hardware is used 2" 1/2"
applications. 2"
F3 mounting
F3
to mount Border
Mounting hardware is used is
A Hardware
for sidewall 1/2"
to mount Border A for sidewall
applications. 2"
used to mount Border A for
applications. 5/8"
2" 1/2"
sidewall applications. 5/8" 1/2"
LINEAR DIFFUSERS
F4 MOUNTING HARDWARE 5/8"
F4 2"
F4mounting
MOUNTING HARDWARE
FORMATIONS
5/8"
F4 hardware is used to F4 2"
mount
F4 Border
mounting A along
hardware the perimeter
is used to
F4
of a MOUNTING
ceiling with a HARDWARE
return air slot.
mount Border A along
F4 MOUNTING HARDWARE the perimeter F4
2 1/2" 2"
F4
of amounting hardware
ceiling with a returnisair
used
slot.to F4 2"
F4 mounting
mount Borderhardware
A along theis used to
perimeter 2 1/2" 1/2"
F4mount
of
Mounting
Border
a ceiling
Hardware
withA aalong theairperimeter
return slot. 1/2"
isof used towith
a ceiling mounta returnBorder
air slot. 2 1/2"
2 1/2"1 1/8"
A along the perimeter of a 1/2"
1 1/8" 1/2"
ceiling with a return air slot.
F4
l 1 1/8"
F4 MOUNTING HARDWARE
25
MOUNTING CLIP DETAILS 1 1/8"
F4
l 2"
F4 MOUNTING
Mounting hardware HARDWARE
F4 is used to flush
2"
mount
Mounting Border D against
F4 isaused
hardware HARDWARE sidewall.
to flush
F4
l
FAL/FALC CURVED
F4 MOUNTING F4
ll
mount Border D against
F4 MOUNTING a sidewall.
HARDWARE 2 1/2" 2"
2"
Mounting hardware 2"
F4 is used to flush F5
F5 MOUNTING HARDWARE 2"
1/2"
Mounting
mount
F5 Mounting hardware
Border F4 isaused
D against
Hardware to flush
sidewall.
is 1 3/4"
2 1/2"
Mounting hardware F5 is used to flush
1 5/8"
mount
1 3/4"
Border
1 5/8" D against a sidewall. 1/2"
used to 1flush 5/16" mount Border mount Border B against a sidewall.
2 1/2"
1 5/16"
7/16"
1 1/8" 1/2"
7/16"
Tape and Spackle
1 1/8"
1 1/8"
01/4 THRU
01/4 THRU
F6 F6 MOUNTING HARDWARE
1" 1/2"
F6 mounting hardware is used for easy
2" suspension of the Formations unit from 1/2"
1 1/16"
1"
2016 Metal Industries, Inc.
1/2" the structure. The clip is designed to LDG11
utilize standard hanger wire.
2"
F5
F5
2"
2" F5 MOUNTIN
F5 MOUNTIN
Mounting hardware
Mounting hardware F
3/4"
11 3/4" 5/8"
11 5/8" F5 mount Border
Border BB aga
aga
5/16"
11 5/16" 2" mount
F5 MOUNTIN
7/16"
01/4 THRU
01/4 THRU
Tape and Spackle
2"
1/2"
1/2"
Formations assembly into Mounting hardware
Mounting hardware F
AND GRILLES
integrate the
integrate the Format
Forma
an acoustical suspension F7 F7 MOUNTIN
1/2" an acoustical
an acoustical suspensuspe
system. The F7 clip is field 3"
3" 3"
3" F7
F7 clip isis field
Mounting
clip field forme
hardware
forme
formed and attached to the the
the cross tees.
integrate
cross tees.
the Forma
cross tees. an acoustical suspe
3" 3" F7 clip is field forme
the cross tees.
2"
F10
F10 F10 MOUNTIN
F10 MOUNTIN
F10 Mounting Hardware 1 9/16" F10 mounting
F10 mounting hardw
hardw
is used to align the 2" align
align the Formations
the
F10 Formations
MOUNTIN
F10
Formations diffuser in aa Bolt-slot
in Bolt-slot tee
tee bar
ba
1 9/16" F10 mounting hardw
13/16"
surface in a Bolt-slot align the Formations
LINEAR DIFFUSERS
13/16"
F1
F11
Spline Clips
Spline Clips are
are use
use
F11l
F11l
ll of the
of the Formations
FormationsF1 did
F11 Alignment Strips
straight and
straight and true
true inst
ins
are used to align sections Spline Clips are use
6" F11l
of the Formations diffuser, l of the Formations d
1 1/4" straight and true ins
ensuring a straight and
true installation in a 6"
LDG12 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
26
HARD CEILING APPLICATION
Screwl
LINEAR DIFFUSERS
Tee l
Ceiling Tile
AND GRILLES
Ceiling Framing F6
F7 Clip
F2l F2l
l l
F1
Trim By Others
LINEAR DIFFUSERS
FORMATIONS
F1l F1l
l l
F1l F1l
l l
F1l F1l
l l
Tape and
Spackle
andl
ckle Tape and BORDER DC
SpackleBORDER BA BORDER AA
BORDER BA BORDER AA
HARD CEILING PERIMETER APPLICATION
ER DC Ceiling Framing BORDER DA
F4
l Ceiling Framing Ceiling Framing
F4
Ceiling Framing
F1
F4
l Ceiling Framing
F4 F5
Ceiling Framing
Ceiling Framing
Ceiling Framing F5
F1 Ceiling Framing
Ceiling Framing Ceiling Framing
Ceiling Framing
F3 F1
Tape andl
Spackle
F1
Tape and
Tape andl Spackle
Spackle
BORDER BA
BORDER DC BORDER DA Available Return Air Tape and
Trim By Others Spackle
Tape and Spackle Available Return Air Tape and
Trim By Others Spackle
BORDER DC BORDER DA
LINEAR DIFFUSERS
Ceiling Framing
BORDER BA BORDER AA BORDER BC
Ceiling Framing
Ceiling Framing
Ceiling Framing F3
Ceiling Framing
Ceiling Framing
F3
F5
Ceiling Framing
Ceiling Framing
Tape and
Spackle F1
Available Return A
BORDER BA BORDER AA Trim By Others
Tape and
Spackle Tape and Spackle
LINEAR DIFFUSERS
BORDER BA BORDER
BORDER BA AA BORDER A
FORMATIONS
BORDER AA BORDER BC
F5
Ceiling Framing
Ceiling Framing
g Framing
F5
Ceiling Framing
F1 Ceiling Framing
Ceiling Framing
F1
LDG14 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
ACOUSTICAL CEILING APPLICATION
LINEAR DIFFUSERS
AND GRILLES
END FABRICATION DIMENSIONS
LINEAR DIFFUSERS
C C C C
FORMATIONS
O O O O
C
C
FAL/FALC CURVED
C
C
O O O O
- - - -
MO 2EC 1EC
BORDER TYPE SLOT WIDTH C O C O C O
1 D-1/8 D+11/32 D-1/4 D D-1/8 D
1.5 D-1/8 D+11/32 D-1/4 D D-1/8 D
AA 2 D-1/8 D+11/32 D-1/4 D D-1/8 D
2.5 D-1/8 D+11/32 D-1/4 D D-1/8 D
LINEAR DIFFUSERS
LDG16 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES FAL/FALC SPECIFICATIONS
FORMATIONS ARCHITECTURAL LINEAR Performance Specification
SLOT DIFFUSER EXTRUDED ALUMINUM The manufacturer shall provide published performance
MODELS FAL/FALC data. Data shall be tested in accordance to ANSI/
Diffusers shall be models FAL/FALC manufactured by ASHRAE Standard 70-2006.
METALAIRE. Units shall be constructed of heavy gauge
extruded aluminum. The units shall be available in 1", Paint Specification
1 1/2", 2", 2 1/2" and 3" widths. One and two slot units Process shall be anodic electro-deposition using an
shall be available. anodic acrylic paint. Units shall undergo pre-treatment
including a pressurized spray stage using an alkaline
The diffusers shall be available in sections limited to a
cleaner and a de-ionized water rinse.
maximum of 96". Units longer than 96" are formed by
butting multiple diffuser sections together with alignment
strips at the ends to form an unbroken appearance.
The units shall be the size and quantity as outlined in the
LINEAR DIFFUSERS
AND GRILLES
FORMATIONS MODEL NUMBER SPECIFICATIONS
ARCHITECTURAL LINEAR
Model Slot Width Border Style Frame Configeration # of Slots End Detail Finish Mtg Hdw Pattern Controller
FAL 10-1" AA 1 - Surface Mount 1 2EB 20 - White/Black F1 C - Combo
15-1.5" AC 6 - T-bar Lay in 2 1EB 03 - Black F2 S - Straight
23 - White/Black
20-2" BA 2EC F3
Face
LINEAR DIFFUSERS
25-2.5" BC 1EC F4
FORMATIONS
30-3" CC MM F5
MO F6
OO F7
F10
MODEL FALC
Model Slot Width Border Style Frame Configeration # of Slots End Detail Finish Mtg Hdw Pattern Controller
FAL/FALC CURVED
Applications 15/16" tee system, 9/16" tee system and 9/16" bolt slot tee system
LDG18 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES FORMATIONS SPECIFICATIONS
FORMATIONS ARCHITECTURAL LINEAR Performance Specification
SLOT DIFFUSER EXTRUDED ALUMINUM The manufacturer shall provide published performance
MODELS FTS/FTSI data. Data shall be tested in accordance to ANSI/
Diffusers shall be models FTS/FTSI manufactured by ASHRAE Standard 70-2006.
METALAIRE. Units shall be constructed of heavy gauge
extruded aluminum. The units shall be available in Paint Specification
1", 1 1/2" and 2" widths. One and two slot units shall Process shall be anodic electro-deposition using an
be available. anodic acrylic paint. Units shall undergo pre-treatment
including a pressurized spray stage using an alkaline
The diffusers shall be available in 24", 48" or 60".
cleaner and a de-ionized water rinse.
The units shall be the size and quantity as outlined
in the plans and specifications.
LINEAR DIFFUSERS
AND GRILLES
FORMATIONS MODEL NUMBER SPECIFICATIONS
ARCHITECTURAL LINEAR
Model Slot Width Border Style Inlet # of Slots Length Finish Mtg Hdw Pattern Controller Available Options
FTS 10-1" AA NI - No Inlet 1 24 20 - White/Black F6 C - Combo FODR Face Operated Damper
FTSI 15-1.5" 06 2 48 F7 S - Straight ID Inlet Damper
20-2" 08 60 F10 ROD Remote Operated Damper
10 CC Closed Cell Insualtion
12 EI External Insulation
14
LINEAR DIFFUSERS
FORMATIONS
FTS
LDG20 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
FORMATIONS PERFORMANCE DATA
1 SLOT STANDARD BLADE HORIZONTAL THROW WITH METALAIRE PLENUM
CFM 55 70 90 110 125 145 160 180
Ps .026 .047 .073 .105 .143 .187 .236 .292
2 ft. Pt .031 .055 .086 .125 .168 .221 .278 .344
NC - 18 23 27 31 34 37 39
Throw 3-6-11 5-8-12 6-9-14 8-11-15 9-12-17 10-12-18 11-13-19 11-14-20
One Slot 1.5" Slot Width
LINEAR DIFFUSERS
Ps .032 .057 .089 .128 .175 .228 .289 .356
AND GRILLES
5 ft. Pt .062 .109 .171 .246 .335 .438 .554 .684
NC 15 21 27 31 34 37 40 43
Throw 6-11-17 9-14-20 12-18-22 14-21-24 17-22-26 19-24-28 21-25-30 22-26-31
CFM 55 70 90 110 125 145 160 180
Ps .024 .042 .066 .094 .129 .168 .213 .262
2 ft. Pt .025 .045 .070 .102 .138 .180 .227 .281
NC - - 19 24 29 33 36 39
Throw 3-6-11 5-8-12 6-9-14 8-11-15 9-12-17 10-12-18 11-13-19 11-14-20
One Slot 1.5" Slot Width
LINEAR DIFFUSERS
8" Oval Inlet
FORMATIONS
4 ft. Pt .033 .059 .092 .132 .179 .236 .298 .367
NC - - 21 26 31 35 38 41
Throw 5-8-15 7-11-18 9-13-20 11-15-22 12-17-23 14-18-25 15-19-26 16-20-28
CFM 135 180 225 270 315 360 405 450
Ps .029 .051 .080 .115 .157 .205 .260 .321
5 ft. Pt .039 .070 .110 .158 .215 .281 .355 .439
NC - 16 22 28 32 36 39 42
Throw 6-11-17 9-14-20 12-18-22 14-21-24 17-22-26 19-24-28 21-25-30 22-26-31
FTS
LDG22 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
FORMATIONS PERFORMANCE DATA
1 SLOT STANDARD BLADE HORIZONTAL THROW WITH METALAIRE PLENUM
CFM 130 160 190 220 250 280 310 340
Ps .049 .075 .106 .142 .183 .229 .281 .338
2 ft. Pt .054 .082 .116 .156 .201 .253 .310 .372
NC - 16 22 27 31 34 37 39
Throw 7-10-17 9-13-19 10-14-20 12-15-22 13-16-23 14-17-25 15-18-26 16-19-27
One Slot 2.5" Slot Width
LINEAR DIFFUSERS
Ps .060 .092 .129 .173 .223 .280 .344 .413
AND GRILLES
5 ft. Pt .092 .139 .196 .263 .339 .426 .522 .628
NC - 20 25 30 34 37 40 43
Throw 13-20-27 16-25-29 19-27-32 22-29-34 25-31-37 27-33-39 28-35-41 30-36-43
CFM 130 160 190 220 250 280 310 340
Ps .044 .066 .093 .125 .162 .203 .249 .299
2 ft. Pt .047 .071 .100 .134 .173 .217 .266 .320
NC - 16 22 27 31 34 37 39
Throw 7-10-17 9-13-19 10-14-20 12-15-22 13-16-23 14-17-25 15-18-26 16-19-27
One Slot 2.5" Slot Width
LINEAR DIFFUSERS
Ps .049 .074 .104 .139 .180 .225 .276 .332
FORMATIONS
4 ft. Pt .061 .092 .130 .174 .225 .282 .345 .415
NC - 18 24 29 33 36 39 41
Throw 10-15-24 12-18-26 14-20-29 17-22-31 19-23-33 20-25-35 21-26-37 22-27-38
CFM 325 400 475 550 625 700 775 850
Ps .053 .081 .114 .153 .198 .248 .304 .366
5 ft. Pt .072 .110 .155 .207 .268 .336 .412 .495
NC - 20 25 30 34 37 40 43
Throw 13-20-27 16-25-29 19-27-32 22-29-34 25-31-37 27-33-39 28-35-41 30-36-43
FTS
LDG24 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
FORMATIONS PERFORMANCE DATA
2 SLOT STANDARD BLADE HORIZONTAL THROW WITH METALAIRE PLENUM
CFM 115 145 175 205 235 260 290 320
Ps .046 .072 .103 .140 .183 .232 .286 .346
2 ft. Pt .054 .084 .121 .165 .215 .271 .335 .405
NC - 16 22 27 31 35 38 40
Throw 7-11-16 9-13-18 11-14-19 12-15-21 13-16-22 14-17-24 14-18-25 15-19-26
Two Slot 1" Slot Width
LINEAR DIFFUSERS
Ps .056 .088 .126 .172 .224 .283 .349 .422
AND GRILLES
5 ft. Pt .107 .165 .239 .323 .423 .533 .660 .795
NC - 20 26 31 35 38 41 43
Throw 13-20-25 17-24-28 20-26-31 23-28-33 25-30-35 26-32-38 27-34-40 29-35-42
CFM 115 145 175 205 235 260 290 320
Ps .037 .058 .083 .112 .147 .185 .229 .276
2 ft. Pt .041 .064 .092 .125 .163 .205 .254 .307
NC - 16 22 27 31 35 38 40
Throw 7-11-16 9-13-18 11--14-19 12-15-21 13-16-22 14-17-24 14-18-25 15-19-26
Two Slot 1" Slot Width
LINEAR DIFFUSERS
Ps .041 .064 .092 .125 .163 .206 .254 .307
FORMATIONS
4 ft. Pt .057 .089 .128 .175 .227 .288 .354 .429
NC - 18 24 29 33 37 40 42
Throw 10-15-22 12-18-25 15-19-28 17-21-30 18-22-32 19-24-34 20-25-35 21-26-37
CFM 295 365 440 510 585 655 730 800
Ps .045 .070 .101 .137 .179 .227 .279 .338
5 ft. Pt .071 .110 .159 .215 .281 .354 .438 .528
NC - 20 26 31 35 38 41 43
Throw 13-20-25 17-24-28 20-26-31 23-28-33 25-30-35 26-32-38 27-34-40 29-35-42
FTS
LDG26 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
FORMATIONS PERFORMANCE DATA
2 SLOT STANDARD BLADE HORIZONTAL THROW WITH METALAIRE PLENUM
CFM 155 190 225 260 295 330 365 400
Ps .065 .097 .137 .183 .235 .294 .360 .432
2 ft. Pt .079 .118 .166 .222 .286 .357 .437 .525
NC - 16 21 26 30 33 36 38
Throw 9-13-18 11-14-20 13-16-22 14-17-24 15-18-25 15-19-27 16-20-28 17-21-29
Two Slot 2" Slot Width
LINEAR DIFFUSERS
Ps .079 .119 .167 .223 .287 .359 .440 .528
AND GRILLES
5 ft. Pt .168 .250 .353 .469 .606 .756 .927 1.110
NC - 19 24 29 33 36 39 42
Throw 12-19-29 15-23-32 18-27-35 21-31-37 24-34-40 27-36-42 29-38-44 32-39-47
CFM 155 190 225 260 295 330 365 400
Ps .032 .048 .067 .089 .115 .143 .175 .211
2 ft. Pt .036 .054 .076 .101 .130 .163 .199 .239
NC - 16 21 26 30 33 36 38
Throw 6-10-18 8-12-20 10-14-22 11-17-24 13-18-25 14-19-27 16-20-28 17-21-29
Two Slot 2" Slot Width
LINEAR DIFFUSERS
Ps .035 .053 .074 .099 .127 .159 .195 .234
FORMATIONS
4 ft. Pt .052 .079 .110 .147 .190 .238 .291 .349
NC - 18 23 28 32 35 38 40
Throw 9-14-26 11-17-29 14-20-31 16-23-34 18-25-36 20-27-38 22-28-40 24-29-42
CFM 390 475 565 650 740 825 915 1000
Ps .039 .058 .081 .109 .140 .175 .214 .257
5 ft. Pt .066 .099 .139 .185 .238 .297 .365 .437
NC - 19 24 29 33 36 39 42
Throw 12-19-29 15-23-32 18-27-35 21-31-37 24-34-40 27-36-42 29-38-44 32-39-47
FTS
LDG28 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
FORMATIONS PERFORMANCE DATA
2 SLOT STANDARD BLADE HORIZONTAL THROW WITH METALAIRE PLENUM
CFM 195 240 280 320 365 405 450 490
Ps .027 .039 .054 .072 .092 .114 .139 .166
2 ft. Pt .038 .056 .078 .102 .131 .163 .199 .238
NC - 16 21 25 29 33 35 38
Throw 6-10-20 8-12-23 10-15-25 11-17-26 13-19-28 14-21-30 16-22-31 17-23-33
Two Slot 3" Slot Width
LINEAR DIFFUSERS
Ps .041 .061 .085 .112 .143 .178 .216 .259
AND GRILLES
5 ft. Pt .113 .166 .230 .304 .389 .484 .589 .705
NC - 19 24 29 33 36 39 41
Throw 11-19-32 15-24-36 18-28-39 21-32-42 24-36-44 27-40-47 30-42-49 32-44-51
CFM 195 240 280 320 365 405 450 490
Ps .022 .032 .044 .058 .075 .093 .113 .135
2 ft. Pt .028 .042 .058 .077 .098 .122 .149 .178
NC - - 20 24 28 32 35 37
Throw 6-10-20 8-12-23 10-15-25 11-17-26 13-19-28 14-21-30 16-22-31 17-23-33
Two Slot 3" Slot Width
LINEAR DIFFUSERS
Ps .024 .035 .049 .065 .083 .103 .125 .150
FORMATIONS
4 ft. Pt .051 .076 .105 .140 .179 .221 .269 .323
NC - 17 22 26 30 34 37 39
Throw 8-14-29 12-18-32 14-21-35 16-24-37 18-27-40 20-30-42 22-31-44 24-33-46
CFM 490 595 700 805 910 1015 1120 1225
Ps .026 .039 .054 .071 .091 .113 .138 .165
5 ft. Pt .070 .103 .142 .188 .240 .298 .363 .435
NC - 18 23 28 32 35 38 41
Throw 11-19-32 15-24-36 18-28-39 21-32-42 24-36-44 27-40-47 30-42-49 32-44-51
FTS
NC - - 20 27 34 38 41 44
Throw 5-10-20 10-15-27 16-24-34 20-27-38 24-30-42 26-32-45 28-34-48 29-36-51
CFM 40 60 100 120 145 165 190 210
Ps .020 .045 .126 .181 .265 .343 .455 .556
1 Slot
NC - - 23 29 35 38 42 44
2.5" Slot Width
LDG30 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
FORMATIONS PERFORMANCE DATA
1 SLOT COMBO BLADE HORIZONTAL THROW WITH METALAIRE PLENUM
CFM 20 40 60 80 100 120 140 160
Ps .004 .018 .040 .071 .111 .159 .217 .283
2 ft. Pt .005 .020 .046 .081 .127 .182 .248 .324
NC - - 20 26 31 35 38 41
Throw 1-3-7 4-7-11 7-10-14 9-11-16 10-13-18 11-14-19 12-15-21 13-16-22
One Slot 1" Slot Width
LINEAR DIFFUSERS
Ps .005 .022 .049 .086 .135 .195 .265 .346
AND GRILLES
5 ft. Pt .009 .038 .085 .151 .236 .340 .463 .605
NC - 16 23 29 34 38 42 45
Throw 2-5-11 8-13-18 13-18-22 17-21-25 19-24-28 21-26-31 23-28-33 24-30-35
CFM 20 40 60 80 100 120 140 160
Ps .003 .011 .025 .045 .070 .101 .137 .179
2 ft. Pt .003 .012 .027 .049 .076 .109 .149 .194
NC - - - 21 26 31 35 39
Throw 1-3-7 4-7-11 7-10-14 9-11-16 10-13-18 11-14-19 12-15-21 13-16-22
One Slot 1" Slot Width
LINEAR DIFFUSERS
8" Oval Inlet
FORMATIONS
4 ft. Pt .004 .016 .036 .065 .101 .146 .198 .259
NC - - 17 23 28 33 37 41
Throw 2-4-9 6-9-16 9-14-19 13-16-22 14-18-25 16-19-27 17-21-30 18-22-32
CFM 50 100 150 200 250 300 350 400
Ps .003 .014 .031 55.000 .086 .123 .168 .219
5 ft. Pt .005 .020 .044 .078 .122 .176 .239 .312
NC - - 18 24 30 35 39 42
Throw 2-5-11 8-13-18 13-18-22 17-21-25 19-24-28 21-26-31 23-28-33 24-30-35
FTS
LDG32 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
FORMATIONS PERFORMANCE DATA
1 SLOT COMBO BLADE HORIZONTAL THROW WITH METALAIRE PLENUM
CFM 70 100 130 160 190 220 250 280
Ps .022 .044 .075 .113 .159 .213 .276 .346
2 ft. Pt .023 .047 .080 .121 .170 .228 .294 .369
NC - - 20 25 30 33 37 40
Throw 5-8-15 8-12-18 10-14-20 13-16-22 14-17-24 15-19-26 16-20-28 17-21-30
One Slot 2" Slot Width
LINEAR DIFFUSERS
Ps .026 .054 .091 .138 .195 .261 .337 .423
AND GRILLES
5 ft. Pt .036 .072 .122 .186 .262 .351 .453 .568
NC - 18 24 29 33 37 40 43
Throw 10-16-23 15-22-28 19-27-32 24-30-35 27-33-39 29-35-41 31-38-44 32-40-47
CFM 70 100 130 160 190 220 250 280
Ps .020 .041 .069 .104 .147 .197 .255 .320
2 ft. Pt .021 .043 .072 .109 .154 .206 .266 .334
NC - - 20 25 30 33 37 40
Throw 5-8-15 8-12-18 10-14-20 13-16-22 14-17-24 15-19-26 16-20-28 17-21-30
One Slot 2" Slot Width
LINEAR DIFFUSERS
Ps .022 .045 .077 .116 .164 .219 .283 .355
FORMATIONS
4 ft. Pt .026 .052 .089 .134 .189 .254 .328 .412
NC - 17 22 27 32 35 39 42
Throw 8-12-21 11-17-25 14-20-29 18-22-32 20-24-34 21-26-37 23-38-40 24-30-42
CFM 175 250 325 400 475 550 625 700
Ps .024 .050 .084 .128 .180 .241 .311 .391
5 ft. Pt .030 .061 .103 .156 .220 .296 .382 .479
NC - 18 24 29 33 37 40 43
Throw 10-16-23 15-22-28 19-27-32 24-30-35 27-33-39 29-35-41 31-38-44 32-40-47
FTS
LDG34 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
FORMATIONS PERFORMANCE DATA
1 SLOT COMBO BLADE HORIZONTAL THROW WITH METALAIRE PLENUM
CFM 135 180 220 260 305 345 390 430
Ps .032 .055 .084 .119 .160 .207 .260 .320
2 ft. Pt .037 .064 .098 .139 .187 .242 .305 .374
NC - 18 23 28 31 35 38 40
Throw 5-7-14 6-9-19 8-12-23 9-14-26 11-16-28 12-18-30 14-20-32 15-23-34
One Slot 3" Slot Width
LINEAR DIFFUSERS
Ps .039 .067 .102 .145 .195 .253 .318 .391
AND GRILLES
5 ft. Pt .073 .126 .192 .272 .367 .475 .597 .734
NC 16 22 27 31 35 38 41 44
Throw 9-14-23 12-18-30 15-22-37 17-26-42 20-30-45 23-35-48 26-39-51 29-43-53
CFM 135 180 220 260 305 345 390 430
Ps .030 .052 .079 .112 .151 .195 .246 .302
2 ft. Pt .033 .057 .088 .124 .167 .217 .273 .335
NC - 18 23 28 31 35 38 40
Throw 5-7-14 6-9-19 8-12-23 9-14-26 11-16-28 12-18-30 14-20-32 15-23-34
One Slot 3" Slot Width
LINEAR DIFFUSERS
Ps .034 .057 .088 .124 .167 .217 .273 .335
FORMATIONS
4 ft. Pt .047 .080 .122 .174 .234 .302 .381 .468
NC - 20 25 30 33 37 40 42
Throw 7-10-20 9-13-26 11-16-33 13-19-37 15-23-40 17-26-43 19-29-45 21-32-48
CFM 340 445 550 655 760 865 970 1075
Ps .037 .063 .096 .137 .184 .239 .300 .369
5 ft. Pt .058 .099 .151 .214 .288 .373 .469 .576
NC 16 22 27 31 35 38 41 44
Throw 9-14-23 12-18-30 15-22-37 17-26-42 20-30-45 23-35-48 26-39-51 29-43-53
FTS
LDG36 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
FORMATIONS PERFORMANCE DATA
1 SLOT COMBO BLADE VERTICAL THROW WITH METALAIRE PLENUM
CFM 70 110 155 200 240 285 325 370
Ps .009 .024 .046 .075 .111 .154 .204 .261
2 ft. Pt .010 .026 .050 .082 .121 .168 .223 .286
NC - - 18 23 27 30 33 35
Throw 4-5-10 6-9-13 8-11-15 10-12-18 11-14-19 12-15-21 13-16-23 14-17-24
One Slot 1" Slot Width
LINEAR DIFFUSERS
Ps .017 .044 .085 .139 .206 .286 .379 .485
AND GRILLES
5 ft. Pt .022 .059 .112 .183 .272 .376 .500 .639
NC - 16 22 27 30 33 36 38
Throw 7-10-16 11-17-21 15-21-24 19-23-28 21-26-31 23-28-33 25-30-36 26-32-38
CFM 80 140 200 260 320 380 440 500
Ps .012 .037 .075 .127 .192 .270 .363 .468
2 ft. Pt .016 .048 .098 .166 .251 .354 .475 .614
NC - 18 25 30 34 37 40 42
Throw 3-5-10 6-9-15 9-12-18 11-14-20 13-16-22 14-17-24 15-18-26 16-20-28
One Slot 1.5" Slot Width
LINEAR DIFFUSERS
8" Oval Inlet
FORMATIONS
4 ft. Pt 0.032 0.098 0.2 0.338 0.512 0.723 0.969 1.251
NC - 20 27 32 36 39 42 44
Throw 5-7-15 9-13-21 12-18-25 16-20-28 18-22-31 20-24-34 21-26-37 23-28-39
CFM 200 350 500 650 800 950 1100 1250
Ps .022 .068 .139 .235 .356 .502 .673 .869
5 ft. Pt .046 .139 .285 .481 .729 1.028 1.378 1.779
NC - 22 28 39 37 40 43 46
Throw 7-10-16 11-17-23 16-24-28 21-27-32 24-30-35 27-33-38 29-35-41 30-37-44
FTS
LDG38 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
FORMATIONS PERFORMANCE DATA
1 SLOT COMBO BLADE VERTICAL THROW WITH METALAIRE PLENUM
CFM 70 125 180 235 290 350 405 460
Ps .007 .024 .051 .088 .134 .191 .257 .333
2 ft. Pt .010 .033 .070 .120 .183 .262 .353 .456
NC - 19 25 31 35 38 41 44
Throw 2-3-7 4-6-12 6-9-18 8-12-22 10-15-24 12-17-26 13-20-28 15-21-30
One Slot 2" Slot Width
LINEAR DIFFUSERS
Ps .014 .045 .095 .163 .249 .354 .477 .619
AND GRILLES
5 ft. Pt .030 .101 .213 .366 .560 .795 1.071 1.389
NC - 22 29 34 38 41 44 47
Throw 4-6-11 8-12-20 11-17-28 15-22-34 18-28-38 22-33-42 26-38-45 29-41-48
CFM 70 125 180 235 290 350 405 460
Ps .006 .020 .041 .071 .109 .155 .209 .271
2 ft. Pt .007 .024 .051 .088 .134 .191 .258 .334
NC - 15 22 26 30 32 35 37
Throw 2-3-7 4-6-12 6-9-18 8-12-22 10-15-24 12-17-26 13-20-28 15-21-30
One Slot 2" Slot Width
LINEAR DIFFUSERS
NC - 17 24 28 32 34 37 39
FORMATIONS
Throw 3-5-10 6-9-18 8-13-25 11-17-31 14-21-34 16-25-37 19-28-40 22-30-43
CFM 170 310 450 590 730 870 1010 1150
Ps .011 .037 .077 .132 .203 .288 .388 .503
5 ft. Pt .020 .065 .137 .236 .361 .513 .691 .896
NC - 19 25 30 33 36 38 41
Throw 4-6-11 8-12-20 11-17-28 15-22-34 18-28-38 22-33-42 26-38-45 29-41-48
CFM 70 125 180 235 290 350 405 460
Ps .004 .012 .026 .044 .067 .095 .129 .167
2 ft. Pt .005 .015 .031 .054 .082 .117 .158 .205
NC - - 18 23 27 31 33 36
Throw 2-3-7 4-6-12 6-9-18 8-12-22 10-15-24 12-17-26 13-20-28 15-21-30
One Slot 2" Slot Width
FTS
LDG40 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
FORMATIONS PERFORMANCE DATA
2 SLOT COMBO BLADE HORIZONTAL THROW WITH METALAIRE PLENUM
CFM 110 145 180 215 250 290 325 360
Ps .037 .065 .102 .147 .200 .261 .331 .408
2 ft. Pt .044 .078 .121 .174 .236 .310 .392 .484
NC - 17 22 26 30 34 37 40
Throw 6-10-15 9-13-18 11-14-20 13-15-22 14-17-24 15-18-25 15-19-27 16-20-28
Two Slot 1" Slot Width
LINEAR DIFFUSERS
Ps .045 .080 .125 .180 .244 .319 .404 .499
AND GRILLES
5 ft. Pt .087 .155 .243 .349 .476 .621 .786 .971
NC - 20 25 30 34 37 40 43
Throw 12-18-24 16-24-28 21-27-32 24-29-35 26-32-37 28-34-40 29-36-42 31-38-45
CFM 110 145 180 215 250 290 325 360
Ps .033 .058 .091 .131 .179 .233 .295 .365
2 ft. Pt .036 .065 .101 .145 .197 .258 .327 .403
NC - 17 22 26 30 34 37 40
Throw 6-10-15 9-13-18 11-14-20 13-15-22 14-17-24 15-18-25 15-19-27 16-20-28
Two Slot 1" Slot Width
LINEAR DIFFUSERS
Ps .036 .065 .101 .146 .198 .259 .328 .405
FORMATIONS
4 ft. Pt .050 .090 .140 .201 .274 .357 .454 .559
NC - 19 24 28 32 36 39 42
Throw 9-14-22 12-18-25 15-20-28 18-22-31 19-24-33 21-25-36 22-27-38 23-28-40
CFM 270 360 450 540 530 720 810 900
Ps .040 .071 .111 .160 .218 .285 .361 .446
5 ft. Pt .062 .110 .172 .247 .336 .439 .556 .686
NC - 20 25 30 34 37 40 43
Throw 12-18-24 16-24-28 21-27-32 24-29-35 26-32-37 28-34-40 29-36-42 31-38-45
FTS
LDG42 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
FORMATIONS PERFORMANCE DATA
2 SLOT COMBO BLADE HORIZONTAL THROW WITH METALAIRE PLENUM
CFM 100 140 175 210 250 285 325 360
Ps .015 .028 .044 .065 .090 .119 .151 .188
2 ft. Pt .021 .039 .062 .091 .126 .166 .213 .264
NC - 17 22 27 31 35 38 41
Throw 6-9-15 8-12-17 11-14-20 12-15-22 14-17-23 14-18-25 15-19-27 16-20-28
Two Slot 2" Slot Width
LINEAR DIFFUSERS
Ps .018 .034 .054 .080 .110 .145 .185 .230
AND GRILLES
5 ft. Pt .056 .103 .167 .243 .337 .443 .567 .701
NC - 20 26 30 34 38 41 44
Throw 5-12-20 10-17-28 14-21-31 17-26-34 20-30-37 23-34-40 26-36-42 29-38-45
CFM 100 140 175 210 250 285 325 360
Ps .013 .024 .039 .057 .079 .104 .133 .165
2 ft. Pt .015 .028 .044 .065 .090 .119 .152 .188
NC - 17 22 27 31 35 38 41
Throw 3-6-13 5-9-17 7-11-20 9-14-22 11-16-23 12-18-25 14-19-27 15-20-28
Two Slot 2" Slot Width
LINEAR DIFFUSERS
Ps .014 .027 .043 .063 .088 .116 .147 .183
FORMATIONS
4 ft. Pt .022 .040 .065 .096 .132 .174 .222 .276
NC - 19 24 29 33 37 40 43
Throw 4-9-18 7-12-25 11-16-28 13-19-31 15-22-33 17-25-36 19-27-38 22-28-40
CFM 255 345 440 530 625 715 810 900
Ps .016 .030 .048 0.07 .090 .127 .162 .201
5 ft. Pt .028 .051 .082 0.12 .167 .219 .280 .347
NC - 20 26 30 34 38 41 44
Throw 5-12-20 10-17-28 14-21-31 17-26-34 20-30-37 23-34-40 26-36-42 29-38-45
FTS
LDG44 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
FORMATIONS PERFORMANCE DATA
2 SLOT COMBO BLADE VERTICAL THROW WITH METALAIRE PLENUM
CFM 150 200 250 300 350 400 450 500
Ps .015 .027 .042 .061 .083 .108 .137 .169
2 ft. Pt .022 .039 .061 .087 .119 .156 .197 .243
NC - 17 22 26 30 34 37 40
Throw 3-7-16 6-10-21 9-13-23 10-16-26 12-18-28 14-21-30 16-22-32 17-23-33
Two Slot 3" Slot Width
LINEAR DIFFUSERS
Ps .019 .033 .052 .074 .101 .132 .167 .206
AND GRILLES
5 ft. Pt .060 .107 .168 .241 .328 .429 .543 .670
NC - 20 25 30 34 37 40 43
Throw 6-14-25 11-20-33 16-25-37 20-30-41 23-35-44 26-40-47 30-42-50 33-45-53
CFM 150 200 250 300 350 400 450 500
Ps .014 .026 .040 .058 .079 .103 .130 .160
2 ft. Pt .018 .033 .051 .074 .101 .131 .166 .205
NC - 16 21 25 29 32 35 38
Throw 3-7-16 6-10-21 9-13-23 10-16-26 12-18-28 14-21-30 16-22-32 17-23-33
Two Slot 3" Slot Width
LINEAR DIFFUSERS
Ps .016 .029 .045 .064 .087 .114 .144 .178
FORMATIONS
4 ft. Pt .032 .057 .089 .129 .175 .229 .290 .358
NC - 18 23 27 31 34 37 40
Throw 5-10-22 8-15-29 12-18-33 15-22-36 17-26-39 20-29-42 22-32-45 25-33-47
CFM 375 500 625 750 875 1000 1125 1250
Ps .018 .031 .049 .071 .096 .125 .159 .196
5 ft. Pt .043 .076 .119 .172 .234 .305 .386 .477
NC - 19 24 29 32 36 39 42
Throw 6-14-25 11-20-33 16-25-37 20-30-41 23-35-44 26-40-47 30-42-50 33-45-53
FTS
LDG46 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
FORMATIONS PERFORMANCE DATA
2 SLOT COMBO BLADE VERTICAL THROW WITH METALAIRE PLENUM
CFM 95 150 205 260 315 370 425 480
Ps .009 .022 .041 .066 .097 .134 .177 .226
2 ft. Pt .010 .026 .049 .078 .115 .159 .209 .267
NC - - 18 22 26 29 32 34
Throw 3-4-8 4-6-13 6-9-17 7-11-22 9-13-27 10-16-30 12-18-32 14-20-34
Two Slot 1" Slot Width
LINEAR DIFFUSERS
Ps .016 .041 .076 .123 .181 .249 .329 .419
AND GRILLES
5 ft. Pt .027 .066 .124 .199 .293 .403 .533 .678
NC - 16 21 26 29 33 35 37
Throw 5-8-13 8-12-20 11-17-28 14-21-35 17-25-42 20-30-47 23-34-51 26-39-54
CFM 195 310 420 530 645 755 870 980
Ps .027 .066 .123 .198 .290 .400 .527 .672
2 ft. Pt .049 .122 .226 .362 .533 .732 .968 1.231
NC - 20 26 30 34 37 40 42
Throw 5-7-14 7-11-21 10-15-29 12-18-36 15-22-39 18-26-43 20-30-46 23-34-49
Two Slot 1.5" Slot Width
LINEAR DIFFUSERS
8" Oval Inlet
FORMATIONS
4 ft. Pt .127 .315 .587 .943 1.384 1.899 2.506 3.197
NC - 22 28 32 36 39 42 44
Throw 6-10-19 10-15-30 14-21-41 17-26-51 21-32-56 25-37-60 28-43-65 32-48-69
CFM 490 770 1050 1330 1610 1890 2170 2450
Ps .050 .123 .229 .368 .539 .743 .979 1.249
5 ft. Pt .190 .469 .871 1.398 2.048 2.823 3.721 4.743
NC 16 24 29 34 37 40 43 46
Throw 9-13-22 14-20-34 18-28-46 23-35-57 28-42-62 33-50-68 38-57-72 43-65-77
FTS
LDG48 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
FORMATIONS PERFORMANCE DATA
2 SLOT STANDARD BLADE VERTICAL THROW WITH METALAIRE PLENUM
CFM 170 260 350 440 530 620 710 800
Ps .044 .104 .188 .296 .430 .589 .772 .980
2 ft. Pt .061 .143 .259 .409 .594 .812 1.065 1.353
NC - - 19 23 27 30 32 34
Throw 3-5-10 5-8-16 7-11-21 9-13-27 11-16-29 13-19-32 14-22-34 16-24-36
Two Slot 2" Slot Width
LINEAR DIFFUSERS
Ps .082 .192 .348 .551 .799 1.093 1.434 1.820
AND GRILLES
5 ft. Pt .187 .438 .794 1.255 1.821 2.492 3.268 4.149
NC - 18 23 27 30 33 36 38
Throw 7-10-16 10-15-25 13-20-34 17-25-42 20-31-46 24-36-50 27-41-54 31-46-57
CFM 170 260 350 440 530 620 710 800
Ps .008 .019 .035 .056 .081 .110 .145 .184
2 ft. Pt .017 .039 .072 .113 .164 .225 .294 .374
NC - 21 26 29 32 35 37 40
Throw 3-5-10 5-8-16 7-11-21 9-13-27 11-16-29 13-19-32 14-22-34 16-24-36
Two Slot 2" Slot Width
LINEAR DIFFUSERS
Ps .012 .028 .050 .079 .115 .158 .207 .262
FORMATIONS
4 ft. Pt .046 .108 .196 .309 .449 .614 .806 1.023
NC 15 23 28 31 34 37 39 42
Throw 5-7-15 7-11-22 10-15-30 13-19-38 15-23-41 18-27-45 20-31-48 23-34-51
CFM 425 650 875 1100 1325 1550 1775 2000
Ps .015 .036 .065 .103 .150 .205 .269 .341
5 ft. Pt .069 .162 .293 .463 .671 .919 1.205 1.529
NC 17 24 29 33 36 38 41 43
Throw 7-10-16 10-15-25 13-20-34 17-25-42 20-31-46 24-36-50 27-41-54 31-46-57
FTS
LDG50 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
FORMATIONS PERFORMANCE DATA
2 SLOT STANDARD BLADE VERTICAL THROW WITH METALAIRE PLENUM
CFM 430 595 760 925 1090 1250 1415 1580
Ps .022 .042 .068 .101 .139 .185 .236 .294
2 ft. Pt .055 .105 .172 .254 .353 .465 .596 .743
NC - 19 24 28 31 34 36 38
Throw 7-11-21 10-15-30 13-19-35 15-23-39 18-27-42 21-31-45 23-34-48 26-36-51
Two Slot 3" Slot Width
LINEAR DIFFUSERS
Ps .041 .078 .126 .187 .259 .343 .439 .546
AND GRILLES
5 ft. Pt .250 .477 .775 1.145 1.588 2.103 2.690 3.350
NC 17 23 28 31 34 37 39 41
Throw 14-20-34 19-28-47 24-36-55 29-43-61 34-51-66 39-59-71 44-64-76 50-68-80
LINEAR DIFFUSERS
FORMATIONS
FTS
1 Slot
NC - 19 31 36 41 45 48 52
AND GRILLES
LDG52 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
FORMATIONS PERFORMANCE DATA
PRESSURIZED CEILING PLENUM WITH COMBO BLADE PATTERN CONTROLLER
VERTICAL FLOW
CFM 50 75 100 120 140 160 180 200
Ps .033 .074 .131 .189 .257 .335 .424 .524
1 Slot
NC - 20 25 29 32 34 36 38
1" Slot Width
LINEAR DIFFUSERS
1 Slot
NC - 18 24 27 30 33 35 37
AND GRILLES
1.5" Slot Width
LINEAR DIFFUSERS
CFM 150 225 300 360 420 480 540 600
FORMATIONS
Ps .027 .060 .106 .153 .208 .272 .344 .425
2 Slot
NC - 19 25 28 31 34 36 38
Throw 4-17-30 6-25-37 8-30-43 10-33-47 11-36-51 13-39-55 14-41-58 16-43-61
CFM 125 190 250 300 350 400 450 500
Ps .041 .095 .164 .237 .322 .421 .533 .658
1 Slot
NC - 22 27 31 33 36 38 40
2.5" Slot Width
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Velocity Velocity of air stream in Feet per Minute
Ps Negative static pressure (inches of water column)
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
LINEAR DIFFUSERS
AND GRILLES
LINEAR DIFFUSERS
FORMATIONS
FTS
LDG54 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
MODEL FAI (INTEGRA)
The appeal of Formations Integra is its design. Laying in an
acoustical tee bar or hard ceiling, the specified ceiling material
becomes the face of the Integra diffuser that fully integrates the
ceiling and the diffuser. Integra is available in 1", 1.5" and 2" slot
widths. Constructed of extruded aluminum, Integra diffusers are
available for either supply or return and can be field adjusted for
one-, two-, three- or four-way directional air flow. Air patterns can
be adjusted for horizontal or vertical throws.
Available size 24 x 24
LINEAR DIFFUSERS
Optional steel center panel
AND GRILLES
LINEAR DIFFUSERS
FORMATIONS
Standard
Formations
FAI
available inlets
Unit A Number of
Models Slot Width Slots W (width) Round
FAI, FAII, FAIR, FAIB, FAIBI, FAIBR-10 1" 1 4 1/8 6, 8, 10, 12, 14
FAI, FAII, FAIR, FAIB, FAIBI, FAIBR-15 1 1/2" 1 4 5/8 6, 8, 10, 12, 14
FAI, FAII, FAIR, FAIB, FAIBI, FAIBR-20 2" 1 5 1/8 6, 8, 10, 12, 14
ARCHITECTURAL LINEAR
Model Slot Width Border Style Inlet # of Slots Length Finish Mtg Hdw Pattern Controller Available Options
FAI 10-1" AA NI - No Inlet 1 24 x 24 20 - White/Black F1 C - Combo FODR Face Operated Damper
FAII 15-1.5" 06 F6 S - Straight ID Inlet Damper
FAIR 20-2" 08 ROD Remote Operated Damper
10 CC Closed Cell Insualtion
12 EI External Insulation
14
LINEAR DIFFUSERS
FORMATIONS
FAI
LDG56 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
METALAIRE INTEGRA 24 X 24
CFM 80 120 155 190 225 260 300
Ps .024 .049 .084 .128 .181 .244 .315
6" Inlet
Pt .035 .072 .123 .187 .264 .355 .459
NC - 17 23 28 32 36 39
Throw 3-5-10 5-7-13 6-9-14 7-11-16 9-2-17 10-13-19 12-14-20
CFM 85 120 160 195 230 265 300
Ps .013 .026 .043 .065 .091 .122 .157
8" Inlet
LINEAR DIFFUSERS
Ps 0.009 0.018 0.03 0.045 0.063 0.084 0.108
10" Inlet
AND GRILLES
Pt 0.011 0.022 0.036 0.054 0.075 0.1 0.129
NC - 19 25 30 34 37 40
Throw 4-5-11 5-8-13 7-10-15 8-12-17 9-13-18 11-14-19 12-15-21
CFM 100 140 175 210 245 280 320
Ps .008 .014 .023 .034 .046 .061 .077
12" Inlet
LINEAR DIFFUSERS
Pt .029 .056 .092 .137 .190 .252 .323
FORMATIONS
NC - 17 23 28 32 35 39
Throw 2-4-7 3-5-10 4-6-13 5-8-14 6-9-16 7-10-17 8-12-18
CFM 75 105 130 160 190 215 245
Ps .012 .022 .035 .052 .072 .095 .121
8" Inlet
NC - 18 24 29 33 36 39
1.5" Slot Width
NC - 18 24 29 34 37 40
Throw 2-4-7 3-5-10 4-7-13 5-8-15 6-10-16 7-11-17 8-13-18
CFM 70 105 135 165 195 225 260
Ps .005 .009 .016 .024 .034 .046 .060
12" Inlet
Optional external insulation, EI, and internal closed cell insulation, CC, are also available
Standard inlet sizes 6", 8", 10", 12", 14" or NI (no inlet)
LDG58 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
MODEL UP-FALC
The Formations hemmed plenum, model UP-FALC, is designed
to connect model FALC to the ducted supply or return system.
The UP-FALC Is constructed from coated steel and is offered
with standard 6" round inlet and oval inlets up to 14". The overall
height of the plenum is 10 1/2".
Available with 1/2" insulation, model UPI-FALC
Optional external insulation, EI, and internal closed cell insulation, CC, are also available
Standard inlet sizes 6", 8", 10", 12", 14" or NI (no inlet)
LINEAR DIFFUSERS
AND GRILLES
LINEAR DIFFUSERS
FORMATIONS
Formations
Unit Slot Width Number of Slots Dim W (I.D. Width)
1" 1 3 1/4
UPFALC
1.5" 1 4 1/4
2" 1 5 1/4
Inlet Chart 2.5" 1 6 1/4
Size Type A B 3" 1 7 1/4
6 Round 5 7/8 1" 2 5 / 5/8
8 Oval 5 7/8 8 15/16 1.5" 2 7 5/8
10 Oval 5 7/8 12 1/16 2" 2 9 5/8
12 Oval 5 7/8 15 1/4 2.5" 2 11 5/8
14 Oval 5 7/8 18 7/16 3" 2 13 5/8
LDG60 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
FORMATIONS MITERED CORNER 90o
FMC - FORMATION MITERED CORNER UNIT
FMCC - FORMATION MITERED CORNER CONCEAL MOUNT UNIT
FMCC
LINEAR DIFFUSERS
AND GRILLES
FMCC
LINEAR DIFFUSERS
Model: FMC/FMCC 90
FORMATIONS
Model Number of Slots Slot Width L W (Neck) W (Face OA)
FMC-10/FMCC-10 90 1" 9 5/8 2 7/16 3 5/8
FMC-15/FMCC-15 90 1 1/2" 10 5/8 3 7/16 4 5/8
FMC-20/FMCC-20 90 1 2" 11 5/8 4 7/16 5 5/8
FMC-25/FMCC-25 90 2 1/2" 12 5/8 5 7/16 6 5/8
FMC-30/FMCC-30 90 3" 13 5/8 6 7/16 7 5/8
FMC-10/FMCC-10 90 1" 12 4 13/16 6
FMC-15/FMCC-15 90 1 1/2" 14 6 13/16 8
FMC-20/FMCC-20 90 2 2" 16 8 13/16 10
FMC-25/FMCC-25 90 2 1/2" 18 10 13/16 12
FMC-30/FMCC-30 90 3" 20 12 13/16 14
ACCESSORIES
FMCC
LINEAR DIFFUSERS
AND GRILLES
FMCC
LINEAR DIFFUSERS
FORMATIONS
LDG62 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
FORMATIONS MITERED UNIT
FAC - FORMATIONS MITERED CROSS UNIT
FACC - FORMATIONS MITERED CROSS CONCEAL MOUNT
Mitered Cross
Number Slot W (Face
Model of Slots Width L W (Neck) OA)
FAC/FACC-10 1" 15 5/8 2 7/16 3 5/8
FAC/FACC-15 1 1/2" 16 5/8 3 7/16 4 5/8
FAC/FACC-20 1 2" 17 5/8 4 7/16 5 5/8
FAC/FACC-25 2 1/2" 18 5/8 5 7/16 6 5/8
FAC/FACC-30 3" 19 5/8 6 7/16 7 5/8
FAC/FACC-10 1" 18 4 13/16 6
FAC/FACC-15 1 1/2" 20 6 13/16 8
FAC/FACC-20 2 2" 22 8 13/16 10
LINEAR DIFFUSERS
FAC/FACC-25 2 1/2" 24 10 13/16 12
AND GRILLES
FAC/FACC-30 3" 26 12 13/16 14
T" Cross
LINEAR DIFFUSERS
Number Slot W (Face
FORMATIONS
Model of Slots Width L W (Neck) OA)
FAT/FATC-10 1" 15 5/8 2 7/16 3 5/8
FAT/FATC-15 1 1/2" 16 5/8 3 7/16 4 5/8
FAT/FATC-20 1 2" 17 5/8 4 7/16 5 5/8
FAT/FATC-25 2 1/2" 18 5/8 5 7/16 6 5/8
FAT/FATC-30 3" 19 5/8 6 7/16 7 5/8
FAT/FATC-10 1" 18 4 13/16 6
FAT/FATC-15 1 1/2" 20 6 13/16 8
FAT/FATC-20 2 2" 22 8 13/16 10
FAT/FATC-25 2 1/2" 24 10 13/16 12
FAT/FATC-30 3" 26 12 13/16 14
ACCESSORIES
FAT FATC
45
FORMATIONS ACCESSORIES
LIGHT SHIELD
H
LINEAR DIFFUSERS
AND GRILLES
SLOT SLOT
Slot Number
NUMBER
Slot Width
WIDTH
DIM H
DIM H
1" 3-1/8"
1 3 1/8
1-1/2" 3-1/8"
11 1/2 2" 3 1/8 3-1/8"
1 2 2-1/2"
3 1/8 3-1/8"
3" 3-1/8"
2 1/2 3 1/8
1" 2-3/4"
3 3 1/8
1-1/2" 3"
LINEAR DIFFUSERS
Slot Number 2
Slot Width 2" DIM H 3-3/4"
FORMATIONS
1 2-1/2"
2 3/4
5"
3" 5-3/4"
1 1/2 3
2 2 3 3/4
2 1/2 5
3 5 3/4
Standard Finish 15/16" & 9/16" Tee System, 9/16" Bolt Slot
01 White with Black Plenum. Tee System, Hard Ceiling.
LDG64 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
FORMATIONS ACCESSORIES
FODR FACE OPERATED DAMPER ROD
LINEAR DIFFUSERS
AND GRILLES
LINEAR DIFFUSERS
FORMATIONS
ACCESSORIES
6 5 - 7/8
8 5 - 7/8 x 8 - 15/16
10 5 - 7/8 x 12 - 1/16
12 5 - 7/8 x 15 - 1/4
14 5 - 7/8 x 18 - 7/16
LINEAR DIFFUSERS
FORMATIONS
ACCESSORIES
48
48
LDG66 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
D - Remote Operated Damper
FORMATIONS ACCESSORIES
ROD - REMOTE OPERATED DAMPER
LINEAR DIFFUSERS
Damper Installed
AND GRILLES
Damper Installed
Available
6"
8"
10"
12"
LINEAR DIFFUSERS
Damper with Cable and Locking Coupling
FORMATIONS
ACCESSORIES
Aluminum Linear Slot Diffuser. The 6600 series is an excellent choice for
continuous linear applications where the diffuser can direct air along the
perimeter wall or glass and towards the occupied area to maximize comfort.
6600 Aluminum linear supply
6600-R Aluminum linear return. PAGE 69
Aluminum Modular Slot Diffuser. The 6600-SQ series modular slot diffuser
is designed for lay-in ceiling grids including standard T-bar, Tegular and Donn
Fineline. The design allows a ceiling tile (by others) to be installed from the
face of the diffuser without having to remove the plenum.
6600-SQ Aluminum modular supply
6600-SQI Aluminum modular supply Insulated
6600-SQR Aluminum modular return PAGE 105
LDG68 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
MODEL 6600
The 6600 series supply and return slot diffuser is an excellent choice
for continuous linear applications. The flexibility of the 6600 allows the
diffuser to be installed in a variety of applications including perimeter
office space and large public areas such as airport terminals,
convention centers or shopping malls.
Available in single sections up to 96" which give a clean appearance and easy installation
Tag:
Aluminum pattern controllers are adjustable from the face and can be set to adjust volume
LINEAR DIFFUSERS
Adjustable Linear
Optional curving Slotfor
is available Diffuser - Extruded
architectural enhancementAluminum
AND GRILLES
Pattern
6600R isController / Damper
designed for return applications
Slots: 1/2" (6650), 3/4" (6675) and 1" (6610)
Models: 6600-10-6 Lay in T-Bar - 1 1/8" Border - No Hardware Submittal No: 6600-10(12)-6
6600-12-6 Lay in T-Bar - 1 1/8" Border - With Hardware
Models: 6600-10-6 ( Lay in T-Bar - 1 1/8 Border - No Hardware) Model: 6600-12-6 ( Lay in T-Bar - 1 1/8 Border - With Hardware )
D2 = Duct Opening
D1 = Duct Opening A = Nominal Width
Air Pattern
A = Nominal Width Controller Hanger
Screw
1 34
1 81 Air Pattern
1 S* 3
18 4
W= Overall Width
Number 6600-10(12)-6
T-Bar Module
Duct Opening = T-Bar Module - 2 41
1 81 11
Overall Length = T-Bar Module - 18
4
T-Bar Module
Duct Opening = T-Bar Module
Model 6675 (6675-10-6 & 6675-12-6) Model 6610 (6610-10-6 & 6610-12-6)
S=3/4" No. of Air Slots S=1" No. of Air Slots
Slot 1
2016 Metal Industries, Inc.
2 3 4 5 6 7 8 Slot 1 2 3 4 5 6 7 8 LDG69
A 1 1/2 3 4 1/2 6 7 1/2 9 10 1/2 12 A 1 3/4 3 1/2 5 1/4 7 8 3/4 10 1/2 12 1/4 14
D1 1 7/8 3 3/8 4 7/8 6 3/8 7 7/8 9 3/8 10 7/8 12 3/8 D1 2 1/8 3 7/8 5 5/8 7 3/8 9 1/8 10 7/8 12 5/8 14 3/8
Model 6675 (10-6 & 12-6)
Number Of Slots
S=3/4 Slot 1 2 3 4 5 6 7 8
A 1 9/16 3 1/16 4 9/16 6 1/16 7 9/16 9 1/16 10 9/16 12 1/16
D1 2 3 1/2 5 6 1/2 8 9 3/4 11 12 1/2
D2 2 1/2 4 5 1/2 7 8 1/2 10 1/4 11 1/2 13
W 3 4 1/2 6 7 1/2 9 10 1/2 12 13 1/2
LDG70 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
Submittal: 6600-20-22-6
Adjustable Linear Slot Diffuser -
Extruded Aluminum Pattern Controller
Slots: 1/2" (6650), 3/4" (6675), 1" (6610) and 1-1/2"(6615)
Models: 6600-20-6 Lay In T-Bar - 3/4" Border - No Hardware
6600-22-6 Lay In T-Bar - 3/4" Border - With Hanger Bracket - Concealed Mount
Model: 6600-20-6 ( 3/4" Border - Lay in T-Bar) Model: 6600-22-6 ( 3/4" Border - Lay in T-Bar)
( No Hardware ) (With Hanger Bracket - Concealed Mount)
D2 = Duct Opening
A = Nominal Width Hanger
D1 = Duct Opening Screw
A = Nominal Width Air Pattern
Controller
Air Pattern
4 58
1 34 Controller
1 81
S*
3 3
1 81 1 34
4 4
W =Overall Width
3 S* 3
4 4
W =Overall Width
T-Bar Module
1
Option: End Border Duct Opening = T-Bar Module - 1 2
LINEAR DIFFUSERS
AND GRILLES
3 3
4 1 4
Overall Length = T-Bar Module - 4
1
Overall Length = T-Bar Module - 4
Model 6650 (20-6 & 22-6) Model 6650 (20-6 & 22-6)
S=1/2" Number Of Slots S=1/2" Number Of Slots
Slot 1 2 3 4 5 6 7 8 Slot 1 2 3 4 5 6 7 8
Model 6610 (20-6 & 22-6) Model 6615 (20-6 & 22-6)
S=1" Number Of Slots S=1 1/2" Number Of Slots
Slot 1 2 3 4 5 6 7 8 Slot 1 2 3 4 5 6 7 8
A 1 13/16 3 9/16 5 5/16 7 1/16 8 13/16 10 9/16 12 5/16 14 1/16 A 2 5/16 4 9/16 6 13/16 9 1/16 N/A N/A N/A N/A
D1 2 1/8 3 15/16 5 5/8 7 3/8 9 1/4 10 7/8 13 3/4 14 1/2 D1 2 5/8 4 7/8 7 1/8 9 3/8 N/A N/A N/A N/A
D2 2 5/16 4 1/16 5 13/16 7 9/16 9 5/16 11 1/16 12 13/16 14 9/16 D2 2 13/16 5 1/16 7 5/16 9 9/16 N/A N/A N/A N/A
W 2 1/2 4 1/4 6 7 3/4 9 1/2 11 1/4 13 14 3/4 W 3 5 1/4 7 1/2 9 3/4 N/A N/A N/A N/A
Notes: (check if provided)
1. Available Finishes 2. Available Accessories 3. Available Options 4. Construction Details
Standard Finish: Boot Plenums Available Sizes available in only 1-8 slots.
20 White frame with black pattern BP - Non-Insulated Boot Plenums Longest single section is 96"
controller. BPI - Insulated Boot Plenums Continuous lengths are made in
Optional Finishes (additional charge) sections.
21 Clear anodized with black
pattern controller
28 Custom Color / Setup Charge
6600
LDG72 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
Submittal: 6600-30-32-6
Adjustable Linear Slot Diffuser -
Extruded Aluminum Pattern Controller
Slots: 1/2" (6650), 3/4" (6675),1" (6610) and 1-1/2" (6615)
Models: 6600-30-6 Lay in T-Bar - 1/2" Border - No Hardware
6600-32-6 Lay in T-Bar - 1/2" Border - Concealed Mount With Hardware
Model: 6600-30-6 ( 1/2" Border ) Model: 6600-32-6 ( 1/2" Border - Lay in T-Bar)
(Lay in T-Bar - No Hardware) (With Concealed Mount Hardware)
D2 = Duct Opening
Hanger
D1 = Duct Opening A =Nominal Width
Air Pattern Screw
A =Nominal Width Controller
Air Pattern
Controller
134
134
1
2 S*
3
4
1 S*
W = Overall Width 2 3
4
W = Overall Width
Option: End Border
End Border (Models: 6600-30-6 and 6600-32-6)
T-Bar Module
LINEAR DIFFUSERS
Duct Opening = T-Bar Module - 1
AND GRILLES
1 1
Option: End Cap 2
Overall Length = T-Bar Module - 1 2
4
T-Bar Module
Duct Opening = T-Bar Module
Air Deflection Patterns
Model 6610 (30-6 & 32-6) Model 6615 (30-6 & 32-6)
S=1" Number Of Slots S=1 1/2" Number Of Slots
Slot 1 2 3 4 5 6 7 8 Slot 1 2 3 4 5 6 7 8
A 1 13/16 3 9/16 5 5/16 7 1/16 8 13/16 10 9/16 12 5/16 14 1/16 A 2 5/16 4 9/16 6 13/16 9 1/16 N/A N/A N/A N/A
D1 2 1/16 3 13/16 5 9/16 7 5/16 9 1/16 10 13/16 12 9/16 14 5/16 D1 2 9/16 4 13/16 7 1/16 9 5/16 N/A N/A N/A N/A
D2 2 5/16 4 1/16 5 13/16 7 9/16 9 5/16 11 1/16 12 13/16 14 9/16 D2 2 13/16 5 1/16 7 5/16 9 9/16 N/A N/A N/A N/A
W 2 1/16 3 13/16 5 9/16 7 5/16 9 1/16 10 13/16 12 9/16 14 5/16 W 5 1/8 7 3/8 9 5/8 11 7/8 N/A N/A N/A N/A
Standard Finish: Boot Plenums Available Sizes available in only 1-8 slots.
20 White frame with black pattern BP - Non-Insulated Boot Plenums Longest single section is 96"
controller. BPI - Insulated Boot Plenums Continuous lengths are made in
Optional Finishes (additional charge) sections.
21 Clear anodized with black pattern
controller
28 Custom Color / Setup Charge
LDG74 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
D2
D2==Duct
DuctOpening
Opening
CC
D1=Models:
D1 =Duct 6600-11-1 (Face Screw Mounting -
DuctOpening
Opening Air
Models: 6600-12-1 (Concealed
AA==Nominal
Nominal WidthSurface Mount -
Width
AirPattern
Pattern
1 1/8 Border - NoController
A = Nominal Width
Hardware)
Controller
1 1/8 Border - With Hardware)Hanger
Hanger
A = Nominal Width Screw
Screw
1 S* 3 11 S* 3
18 4 4 Bottom of Bottom of
8
Ceiling Plane Ceiling Plane
LINEAR DIFFUSERS
C C
AND GRILLES
W= Overall Width W= Overall Width
End Border 1
Ceiling
CeilingOpening
Opening==Nominal Length++2 21
NominalLength
1
Duct
DuctOpening
Opening==Nominal Length++441
NominalLength
1 81 1 81 1 81 1 81
Nominal Length Nominal Length
Overall Length = Nominal Overall
Length + 2 41 = Nominal Length + 2 41
Length
6600
S=1 Slot 1 2 3 4 5 6 7 8
A 1 13/16 3 9/16 5 5/16 7 1/16 8 13/16 10 9/16 12 5/16 14 1/16
D1 2 1/4 4 5 5/8 7 1/2 9 1/4 11 12 3/4 14 1/2
D2 2 3/4 4 1/2 6 1/8 8 9 3/4 11 1/2 13 1/4 15
C 2 3/8 4 1/8 5 3/4 7 5/8 9 3/8 11 1/8 12 7/8 14 5/8
W 3 1/4 5 6 3/4 8 1/2 10 1/4 12 13 3/4 15 1/2
LDG76 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
Model: 6600-22-73 ( 3/4" Border Concealed Spline) Model: 6600-22-74 ( 3/4" Border Concealed Spline)
(Plaster Frame- with Concealed Mounting) (Plaster Frame and Wall Frame- with Concealed Mounting)
D1 = Duct Opening D1 = Duct Opening
A = Nominal Width A = Nominal Width
Hanger
Hanger Screw
Screw
Air Pattern
Air Pattern 4 58 Controller
45
8 Controller
1 81
1 81
3 S* 3
3 S* 3 4 4
4 4 W= Overall Width
W= Overall Width
Model: 6600-22-75 ( 3/4" Border Concealed Spline)
(Wall Frames- with Concealed Mounting)
LINEAR DIFFUSERS
D1 = Duct Opening
Option: End Border
A = Nominal Width
AND GRILLES
Hanger
Screw
Duct Opening = T-Bar Module - 1 21
Air Pattern
4 58 Controller
3 3
4 4 1 81
1
Overall Length = T-Bar Module - 4
3 S* 3
* For Slot Sizes Available See Table Below 4 4
W= Overall Width
Model 6650
6600
LDG78 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
D2 = Duct Opening
D1 = Duct Opening Air Pattern A = Nominal Width Hange
A = Nominal Width Controller
Screw
Models: 6600-40-7 Models: 6600-42-7
(Concealed Spine - No
3
Hardware) (Concealed Spine -with Air Pa
14
1 41 Concealed Mounting Hardware) Contro
45 D2 = Duct Openin
D1 = Duct Opening Air Pattern D2 = Duct Opening 8
25 3
Air Pattern 1 A = Nominal Width
32 4 4 Width
A =25Nominal Controller A = Nominal Width Hanger
h Controller
S*
32 Screw 1 41
W = Overall Width
1 34 Air Pattern 3
25 1
1 34 1 41
1 41 32
Controller 4 25
4
S* 5
48 32
4 58 W = Overal Width
25 3 1
1 32 4 4
4 S* 25
25 32
32 1 34
W = Overall Width 1 41
h
25 3
25 3 1 32 4
32 4 4
LINEAR DIFFUSERS
25 S*
S*
32
W = Overal Width
AND GRILLES
W = Overal Width
7
Overall Length = Nominal Length + 16
7
Overall Length = Nominal Length + 16
6600
LDG80 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
Submittal: 6600-40-42-8
Submittal: 6600-40-42-8
Adjustable Linear Slot Diffuser -
Extruded Aluminum
Adjustable Pattern
Linear Slot Controller
Diffuser -
Slots: 1/2"Aluminum
Extruded (6650), 3/4" (6675),Controller
Pattern 1" (6610), and 1-1/2" (6615)
Slots: 1/2"
Models: (6650), 3/4"
6600-40-8 Drop(6675), 1"Hardware
Face - No (6610), and 1-1/2" (6615)
Models: 6600-42-8
6600-40-8 Concealed
Drop Face - No Mount With Hardware
Hardware
6600-42-8 Drop Face - Concealed Mount With Hardware
Model: 6600-40-8 Model: 6600-42-8
(Drop Face - No Hardware)
Model: 6600-40-8 (Drop Face - With Concealed Mounting Hardware)
Model: 6600-42-8
(Drop Face - No Hardware) (Drop Face - With
D2 = Concealed Mounting Hardware)
Duct Opening
D2 Duct Opening
A = Nominal Width Hanger
Screw
Hanger
A = Nominal Width
Screw
D1 = Duct Opening Air Pattern Air Pattern
D1 Duct Opening
A = Nominal Width Controller
Air Pattern Controller
Air Pattern
A = Nominal Width Controller Controller
1 41 1 41
1 41 1 41
25 3 1 25 3 1
32 4 4 32 4 4
25 S* 3 25 1 25 S* 3 25 1
32 4 32 4 32 4 32 4
25 25
WS*
= Overall Width 32 WS*
= Overall Width 32
W = Overall Width W = Overall Width
Side View (6600-40-8, 6600-42-8 & End Border)
1
LINEAR DIFFUSERS
Side View (6600-40-8, 6600-42-8 & EndDuct
Border)
Opening = T-Bar Module - 2
1
End Border Duct Opening = T-Bar Module - 2
AND GRILLES
End Border
1. Available
Notes: Finishes
(check if provided) 2. Available Accessories 3. Available Options 4. Construction Details
Standard
1. Finish:
Available Finishes 2.Boot Plenums
Available Available
Accessories 3. Available Options 4. Construction
Sizes Details
available in only 1-8 slots.
20 White
Standard frame with black pattern
Finish: BootBP - Non-Insulated
Plenums Boot Plenums
Available Longest single section is 96"
Sizes available in only 1-8 slots.
controller. BPI
BP --Non-Insulated
Insulated BootBoot
Plenums Longest
Continuous lengths areismade
20 White frame with black pattern Plenums single section 96" in
Optional Finishes (additional charge)
controller. sections. lengths are made in
BPI - Insulated Boot Plenums Continuous
21 Clear
Optional anodized
Finishes with black
(additional charge) sections.
pattern
21 Clearcontroller
anodized with black
28 Custom
pattern Color / Setup Charge
controller
28 Custom Color / Setup Charge
6600
LDG82 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
Submittal: 6600-40-42-9
Adjustable Linear Slot Diffuser -
Extruded Aluminum Pattern Controller
Slots: 1/2" (6650), 3/4" (6675), 1" (6610) and 1-1/2" (6615)
Models: 6600-40-9 Narrow Tee - No Hardware
6600-42-9 Narrow Tee / Bolt Slot Gird - Concealed Mount With Hardware
25 3 1 1.8
32 4 4 1 41
S* 25
32
W = Overall Width 25 3 1
32 4 4
S* 25
32
End Border W = Overall Width
Side View (6600-40-9, 6600-42-9 & End Border)
LINEAR DIFFUSERS
1
Duct Opening = T-Bar Module - 2
AND GRILLES
6600-40-9 Model shown Overall Length = T-Bar Module - 41
with Bolt Grid as an alternate
application
Model 6650 (40-9 & 42-9) Model 6675 (40-9 & 42-9)
S=1/2" Number Of Slots S=3/4" Number Of Slots
Slot 1 2 3 4 5 6 7 8 Slot 1 2 3 4 5 6 7 8
A 1 5/16 2 9/16 3 13/16 5 1/16 6 5/16 7 9/16 8 13/16 10 1/16 A 1 9/16 3 1/16 4 9/16 6 1/16 7 9/16 9 1/16 10 9/16 12 1/16
D1 1 9/16 2 13/16 4 1/16 5 5/16 6 9/16 7 13/16 9 1/16 10 5/16 D1 1 13/16 3 5/16 4 13/16 6 5/16 7 13/16 9 5/16 10 13/16 12 5/16
D2 1 7/8 3 1/8 4 3/8 5 5/8 6 7/8 8 1/8 9 3/8 10 5/8 D2 2 1/8 3 5/8 5 1/8 6 5/8 8 1/8 9 5/8 11 1/8 12 5/8
Model 6610 (40-9 & 42-9) Model 6615 (40-9 & 42-9)
S=1" Number Of Slots S=1 1/2" Number Of Slots
Slot 1 2 3 4 5 6 7 8 Slot 1 2 3 4 5 6 7 8
A 1 13/16 3 9/16 5 5/16 7 1/16 8 13/16 10 9/16 12 5/16 14 1/16 A 2 5/16 4 9/16 6 13/16 9 1/16 N/A N/A N/A N/A
D1 2 1/16 3 13/16 5 9/16 7 5/16 9 1/16 10 13/16 12 9/16 14 5/16 D1 2 9/16 4 13/16 7 1/16 9 5/16 N/A N/A N/A N/A
D2 2 3/8 4 1/8 5 7/8 7 5/8 9 3/8 11 1/8 12 7/8 14 5/8 D2 2 7/8 5 1/8 7 3/8 9 5/8 N/A N/A N/A N/A
W 2 9/16 4 5/16 6 1/16 7 13/16 9 9/16 11 5/16 13 1/16 14 13/16 W 3 1/16 5 5/16 7 9/16 9 13/16 N/A N/A N/A N/A
LDG84 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
Model: 6600-50-1 (Surface Mount
No Hardware - Tape & Spackle)
LINEAR DIFFUSERS
AND GRILLES
LINEAR SLOT DIFFUSERS
6600
LDG86 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
LSD - Linear Slot Diffusers
SERIES 6600
Series 6600 INSTALLATION
- Installation
Field Assembly
Units ordered longer than 8ft are shipped in multiple sections. Units
are provided with alignment pins to keep the 6600 diffusers straight
along continuous runs.
LINEAR DIFFUSERS
AND GRILLES
Concealed Mounting
6600
3 2 2 3
12 12
12
LINEAR DIFFUSERS
All drawings on this page are Plain View. A Plain View shows
the diffuser from behind - as if you were standing on the
floor above, looking down onto the back of the diffuser.
LINEAR SLOT DIFFUSERS
1 2
4 4 4
6600
4 Note: For Duct Opening, Ceiling Opening, and Overall Width, see page LSD-83 - 90
LDG88 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
6650MC 45 1/2" Slot
6675MC 45 3/4" Slot
6610MC 45 1" Slot
6615MC 45 1-1/2" Slot
LINEAR DIFFUSERS
Duct Size
Number of Slots (All Models) O.L. O.L. O.L. O.L. O.L.
AND GRILLES
1-2 24 24 3/4 24 27/32 24 5/16 24 29/32 24 29/32
3-5 36 36 3/4 36 27/32 36 5/16 36 29/32 36 29/32
6-8 48 48 3/4 48 27/32 48 5/16 48 29/32 48 29/32
LDG90 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 6600 SPECIFICATIONS
LINEAR SLOT DIFFUSER ALUMINUM Performance Specification
MODELS 6600/6600R The manufacturer shall provide published performance
Air Diffusers shall be model 6600, supply, or 6600R, data. Data shall be tested in accordance to ANSI/
return, linear slot diffusers manufactured by METALAIRE. ASHRAE Standard 70-2006.
Units shall be constructed of heavy gauge extruded
aluminum. Diffusers shall have 1-8 slots with 1/2", 3/4", Paint Specification
1" or 1 1/2" slot widths. The units shall be the size and Process shall be anodic electro-deposition using an
quantity as outlined in the plans and specifications. anodic acrylic paint. Units shall undergo pre-treatment
For supply linear slot diffusers, the pattern controller including a pressurized spray stage using an alkaline
shall be curved, aerodynamically shaped, capable of cleaner and a de-ionized water rinse.
adjustment from the face of the diffuser. The pattern
controller shall allow adjustment from vertical to
horizontal patterns as well as damper the volume of the
LINEAR DIFFUSERS
diffuser. The pattern controller shall allow adjustment
AND GRILLES
from vertical to horizontal patterns as well as damper
the volume through the face of the diffuser. Pattern
controllers shall be aluminum construction. Steel
pattern controllers are not acceptable. For return linear
slot diffusers, the unit will be provided without pattern
controllers to minimize pressure drop and noise.
Linear slot diffusers shall be available in one-piece
sections up to 96". Supply units shall be furnished with
the face white and the pattern controller black.
1-13/16 6600-50-1
AND GRILLES
Number of Slots Available Slot Width Model # Available Finishes Available Accessories
1 through 8 1/2 6650 Standard Boot Plenums
3/4 6675 20 White / Black PC
LINEAR SLOT DIFFUSERS
1 6610 Optional
1 1/2 6615 21 Clear Anodize
28 Custom Color
6600
LDG92 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 6600 PERFORMANCE DATA
MODEL 6650 1/2" SLOT - CFM PER LINEAR FOOT
Horizontal .005 .021 .047 .083 .130 .188 .255 .334 .422 .521
Static
Slots Pressure Vertical .004 .015 .033 .058 .091 .132 .179 .234 .295 .365
CFMLF 5 10 15 20 25 30 35 40 45 50
Horizontal Throw 1-1-6 3-6-12 6-10-14 10-12-17 11-13-19 12-14-20 13-16-22 14-17-24 14-18-25 15-19-26
1 Vertical Throw 2 7 9 11 12 13 14 15 16 17
Horizontal NC <15 <15 <15 17 22 27 30 34 36 38
Vertical NC <15 <15 <15 <15 <15 15 18 22 24 26
CFMLF 10 20 30 40 50 60 70 80 90 100
Horizontal Throw 1-2-8 4-8-17 8-14-20 14-17-24 15-19-26 17-20-29 18-22-31 19-24-33 20-25-35 22-36-37
2 Vertical Throw 3 9 13 15 17 18 20 21 23 24
Horizontal NC <15 <15 <15 20 25 30 33 37 39 41
LINEAR DIFFUSERS
Vertical NC <15 <15 <15 <15 <15 18 21 25 27 29
AND GRILLES
CFMLF 16 30 45 60 75 90 105 120 135 150
Horizontal Throw 2-4-13 6-13-20 13-18-25 17-20-29 19-23-32 20-25-35 22-27-38 18-22-31 19-24-33 20-25-35
3 Vertical Throw 5 11 16 18 21 23 24 26 28 29
Horizontal NC <15 <15 15 22 27 32 35 39 41 43
Vertical NC <15 <15 <15 <15 15 20 23 27 29 31
CFMLF 20 40 60 80 100 120 140 160 180 200
Horizontal Throw 3-6-15 10-15-24 15-20-29 19-24-33 22-26-37 24-29-41 26-31-44 27-33-47 29-35-50 31-37-53
4 Vertical Throw 5 13 18 21 24 26 28 630 32 34
Horizontal Thorw 5-9-18 12-18-31 18-27-38 24-31-44 29-35-49 31-38-54 34-41-59 36-44-63 38-47-66 40-49-70
7 Vertical Throw 7 17 24 28 31 34 37 40 42 45
Horizontal NC <15 18 21 28 33 37 39 43 45 47
Vertical NC <15 <15 <15 16 21 25 37 31 33 35
CFMLF 40 80 120 160 200 240 280 320 360 400
Horizontal Thorw 6-10-19 13-19-33 19-29-41 26-33-47 31-37-33 33-41-58 36-44-63 39-47-67 41-50-71 45-53-75
8 Vertical Throw 7 18 26 30 34 7 40 43 45 48
Horizontal NC <15 20 22 29 34 39 40 44 46 48
Vertical NC <15 <15 <15 17 22 27 28 32 34 36
Horizontal NC <15 15 16 22 25 30 31 35 37 39
Vertical NC <15 <15 <15 <15 <15 18 19 23 25 27
CFMLF 50 75 100 125 150 175 200 225 250 275
Horizontal Throw 10-15-30 15-23-41 20-30-47 25-37-52 30-41-57 35-44-62 38-47-66 41-50-70 43-52-74 45-55-78
5 Vertical Throw 6 13 22 27 29 31 34 36 38 39
Horizontal NC <15 16 17 23 26 32 33 36 38 40
Vertical NC <15 <15 <15 <15 <15 20 21 24 20 28
CFMLF 60 90 120 150 180 210 240 270 300 330
Horizontal Throw 10-15-29 15-22-44 20-29-51 24-37-57 29-44-63 34-48-68 39-51-73 44-54-77 47-57-81 49-60-85
6 Vertical Throw 6 14 24 29 32 34 37 39 41 43
Horizontal NC <15 17 19 24 28 33 34 37 39 41
Vertical NC <15 <15 <15 <15 16 21 22 25 27 29
CFMLF 70 105 140 175 210 245 280 315 350 385
6600
Horizontal Throw 11-16-32 16-24-48 21-32-55 26-40-63 32-48-68 37-52-73 42-55-78 48-59-83 51-62-88 53-65-92
7 Vertical Throw 7 15 26 31 34 37 40 42 45 47
Horizontal NC 16 18 20 24 29 34 35 38 40 42
Vertical NC <15 <15 <15 <15 17 22 23 26 28 30
CFMLF 80 120 160 200 240 280 320 360 400 440
Horizontal Throw 11-17-34 17-25-51 23-34-59 28-42-66 34-51-73 40-55-78 45-59-84 51-63-89 54-66-94 57-70-99
8 Vertical Throw 7 16 28 34 37 40 43 45 48 50
Horizontal NC 18 19 22 25 30 35 37 39 41 43
Vertical NC <15 <15 <15 <15 18 23 25 27 29 31
LDG94 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 6600 PERFORMANCE DATA
MODEL 6610 1" SLOT - CFM PER LINEAR FOOT
Horizontal .008 .030 .047 .068 .092 .120 .152 .188 .227 .270
Static
Slots Pressure Vertical .003 .012 .020 .028 .037 .040 .061 .076 .092 .109
CFMLF 10 20 25 30 35 40 45 50 55 60
Horizontal Throw 1-2-6 3-6-22 4-10-24 6-14-27 9-19-29 11-22-31 14-23-33 18-24-35 20-26-36 22-27-38
1 Vertical Throw 2 10 12 13 14 15 16 17 18 18
Horizontal NC <15 <15 <15 <15 19 22 24 26 28 30
Vertical NC <15 <15 <15 <15 <15 <15 <15 <15 16 18
CFMLF 20 40 50 60 70 80 90 100 110 120
Horizontal Throw 1-3-10 5-10-29 7-16-35 10-22-38 14-26-41 19-29-44 22-33-46 25-35-49 27-36-51 29-38-54
2 Vertical Throw 4 14 17 18 20 21 23 24 25 26
Horizontal NC <15 <15 <15 <15 21 25 27 29 31 33
LINEAR DIFFUSERS
Vertical NC <15 <15 <15 <15 <15 <15 15 17 19 21
AND GRILLES
CFMLF 30 60 75 90 105 120 135 150 165 180
Horizontal Throw 3-7-18 12-18-36 15-23-41 18-27-44 21-32-48 24-26-51 27-39-54 30-41-57 33-43-60 36-44-63
3 Vertical Throw 4 17 21 23 24 26 28 29 31 32
Horizontal NC <15 <15 <15 17 22 27 28 30 32 34
Vertical NC <15 <15 <15 <15 <15 15 16 18 20 22
CFMLF 40 80 100 120 140 160 180 200 220 240
Horizontal Throw 4-10-24 16-24-42 20-30-47 24-36-51 28-39-555 32-42-59 36-44-63 38-47-66 40-49-70 42-51-73
4 Vertical Throw 5 20 24 26 28 30 32 34 35 37
Horizontal Throw 11-16-32 21-32-55 26-40-62 32-48-68 37-52-73 42-55-78 48-59-83 51-62-88 53-65-92 55-68-96
7 Vertical Throw 7 26 31 34 37 40 42 45 47 49
Horizontal NC <15 16 18 24 28 34 36 37 37 39
Vertical NC <15 <15 <15 <15 16 22 24 25 25 27
CFMLF 80 160 200 240 280 320 360 400 440 480
Horizontal Throw 11-17-34 23-34-59 28-42-66 34-51-73 40-55-78 45-59-84 51-63-89 54-66-94 57-70-98 59-73-103
8 Vertical Throw 7 28 34 37 40 43 475 48 50 52
Horizontal NC <15 16 20 26 30 35 37 38 39 41
Vertical NC <15 <15 <15 <15 18 23 25 26 27 29
Horizontal NC <15 15 19 24 29 30 32 34 36 39
Vertical NC <15 <15 <15 <15 17 18 20 22 24 26
6600
LDG96 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 6600R PERFORMANCE DATA
MODEL 6650R 1/2" SLOT WIDTH
Number of Slots Negative Ps Inches of Water .020 .040 .060 .080 .100 .150
CFM/ft. 15 20 25 30 35 40
1
NC - 20 27 32 37 41
CFM/ft. 35 50 60 70 80 95
2
NC - 22 27 32 37 41
CFM/ft. 55 80 95 110 125 150
3
NC - 23 28 33 37 42
CFM/ft. 70 100 120 140 155 190
4
NC - 24 30 34 37 44
CFM/ft. 90 135 155 180 200 245
5
NC - 25 30 34 37 44
LINEAR DIFFUSERS
CFM/ft. 110 155 195 220 245 300
AND GRILLES
6
NC - 26 33 37 40 96
CFM/ft. 130 185 225 260 290 365
7
NC - 27 33 37 41 47
CFM/ft. 140 200 245 280 310 385
8
NC - 28 34 38 42 48
NC - 28 34 38 42 48
CFM/ft. 160 225 275 320 360 440
6
NC - 29 35 40 43 49
CFM/ft. 175 250 305 350 395 480
7
NC - 30 36 40 44 50
CFM/ft. 200 285 350 400 450 545
8
NC - 31 37 41 45 51
6
NC - 33 40 43 47 53
CFM/ft. 245 350 425 490 545 665
7
NC - 34 41 44 47 54
CFM/ft. 280 400 475 560 620 760
8
NC - 35 42 45 48 55
LINEAR SLOT DIFFUSERS
6600
LDG98 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
PERFORMANCE NOTES FOR SERIES 6600
All data is tested in accordance with ANSI/ASHRAE 70-2006.
DEFINITION OF UNITS
1. On units without BP/BPI plenums, pressure drop reported is across the diffuser element only
The field supply plenum pressure drop should be included when determining system fan requirements
A good approximation of the static pressure requirements can be calculated by adding the velocity
pressure through the plenum inlet to the diffuser section pressure drop
2. NC is based on a 4 ft. section of diffuser
The following table should be used to calculate sound levels for lengths other than 4 ft.
3. To correct throws for lengths other than the 4 ft. lengths used in determining catalog performance,
throws should be adjusted per the following table
LINEAR DIFFUSERS
Length (feet) 2 4 8
Throw Correction -7 1 1.2
AND GRILLES
4. All pressures are in inches of water
5. Isothermal throws are given for terminal velocities of 150, 100 and 50fpm, based upon 4' section
6. Vertical throw values are based on a 50fpm terminal velocity
7. For Vertical supply subtract one NC
8. For Returns minus pattern controllers, deduct 12 NC
9. Throw values are based on a 1-Way discharge from the slot. For 2-Way discharge, throw is based upon
the number and size of the slots throwing in each direction, with the total supply air flow split equally
between all slots in the unit
0. Data was collected in accordance to ASHRAE standard 70-2006. Method of Testing for rating the
1
performance of air outlets and inlets
Pattern controllers on supply units are aluminum and are adjustable from the face of the
diffuser and can be set to adjust volume or throw direction from vertical to horizontal
6600RSP is designed for return applications. The unit is supplied without pattern controllers
1-1/8"
AND GRILLES
LINEAR SLOT DIFFUSERS
Pipe
Diameter 1 Slot 2 Slots 3 Slots 4 Slots
10 2-1/2" 4-1/4" N/A N/A
12, 14 2-1/2" 4-1/4" 6" N/A
16 2-1/2" 4-1/4" 6" 8"
18, 20, 22 N/A 4-1/8" 6" 7-7/8"
24, 26, 28 N/A 4-1/8" 6" 7-3/4"
30 N/A 4-1/8" 6" 7-3/4"
38 N/A 4-1/8" 6" 7-3/4"
Note: Duct Cut Out Opening = Normal Length + 1/2 70
LDG100 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 6600SP SPECIFICATIONS
LINEAR SLOT DIFFUSER FOR Performance Specification
SPIRAL PIPE ALUMINUM The manufacturer shall provide published performance
MODELS 6600SP/6600RSP data. Data shall be tested in accordance to ANSI/
Air diffusers shall be model 6600SP, supply, or 6600RSP, ASHRAE Standard 70-2006.
return, linear slot diffusers manufactured by METALAIRE.
Units shall be constructed of heavy gauge extruded Paint Specification
aluminum. Diffusers shall have 1-4 slots with 1" slot Process shall be anodic electro-deposition using an
width. The units shall be the size and quantity as outlined anodic acrylic paint. Units shall undergo pre-treatment
in the plans and specifications. including a pressurized spray stage using an alkaline
cleaner and a de-ionized water rinse.
For supply linear slot diffusers, the pattern controller
shall be curved, aerodynamically shaped, capable of
adjustment from the face of the diffuser. The pattern
controller shall allow adjustment from vertical to
LINEAR DIFFUSERS
horizontal patterns as well as damper the volume of the
AND GRILLES
diffuser. The pattern controller shall allow adjustment
from vertical to horizontal patterns as well as damper
the volume through the face of the diffuser. Pattern
controllers shall be aluminum construction. Steel
pattern controllers are not acceptable. For return linear
slot diffusers, the unit will be provided without pattern
controllers to minimize pressure drop and noise.
Linear slot diffusers shall be available in one-piece
sections up to 96". Supply units shall be furnished with
the face white and the pattern controller black.
LDG102 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 6600SP PERFORMANCE DATA
MODEL 6600SP 1" SLOT - CFM PER LINEAR FOOT
Static Horizontal .008 .030 .047 .068 .092 .120 .152 .188 .227 .270
Pressure
Slots Vertical .003 .012 .020 .028 .037 .040 .061 .076 .092 .109
CFMLF 10 20 25 30 35 40 45 50 55 60
Horizontal Throw 1-2-6 3-6-22 4-10-24 6-14-27 9-19-29 11-22-31 14-23-33 18-24-36 20-26-36 22-27-38
1 Vertical Throw 2 10 12 13 14 15 16 17 18 18
Horizontal NC <15 <15 <15 <15 19 22 24 26 28 30
Vertical NC <15 <15 <15 <15 <15 <15 <15 <15 16 18
CFMLF 20 40 50 60 70 80 90 100 110 120
Horizontal Throw 1-3-10 5-10-29 7-16-35 10-22-38 14-26-41 19-29-44 22-33-46 25-35-49 27-36-51 29-38-54
2 Vertical Throw 4 14 17 18 20 21 23 24 25 26
Horizontal NC <15 <15 <15 <15 21 25 27 29 31 33
LINEAR DIFFUSERS
Vertical NC <15 <15 <15 <15 <15 <15 15 17 19 21
AND GRILLES
CFMLF 30 60 75 90 105 120 135 150 165 180
Horizontal Throw 3-7-18 12-18-36 15-23-41 18-27-44 21-32-48 24-26-51 27-39-54 30-41-57 33-43-60 36-44-63
3 Vertical Throw 4 17 21 23 24 26 28 29 31 32
Horizontal NC <15 <15 <15 17 22 27 28 30 32 34
Vertical NC <15 <15 <15 <15 <15 15 16 18 20 22
CFMLF 40 80 100 120 140 160 180 200 220 240
Horizontal Throw 4-10-24 16-24-42 20-30-47 24-36-51 28-39-55 32-42-59 36-44-63 38-47-66 40-49-70 42-51-73
4 Vertical Throw 5 20 24 26 28 30 32 34 35 37
NC - 27 33 37 41 47
CFM/ft. 105 150 185 210 235 285
3
NC - 29 35 39 43 49
CFM/ft. 140 200 250 280 310 380
4
NC - 31 37 41 45 51
DEFINITION OF UNITS
1. On units without BP/BPI plenums, pressure drop reported is across the diffuser element only
The field supply plenum pressure drop should be included when determining system fan requirements
A good approximation of the static pressure requirements can be calculated by adding the velocity
pressure through the plenum inlet to the diffuser section pressure drop
2. NC is based on a 4 ft. section of diffuser
The following table should be used to calculate sound levels for lengths other than 4 ft.
3. To correct throws for lengths other than the 4 ft. lengths used in determining catalog performance,
throws should be adjusted per the following table
LDG104 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
MODEL 6600SQ
The 6600SQ series' unique design combines a ceiling tile (by others)
placed into the face of the diffuser. The unit provides a full 180 air
pattern adjustment and tight horizontal air patterns.
Designed to accept all popular ceiling tiles
LINEAR DIFFUSERS
AND GRILLES
LINEAR SLOT DIFFUSERS
6600SQ
LDG106 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 6600SQ MODEL NUMBER SPECIFICATION
SUPPLY - MODULAR SLOT ARCHITECTURAL DIFFUSER
MODEL 6600SQ
Model Slot Width # of Slots Inlet Size Module
6600SQ-6 T-bar Lay-in 1/2 1 6
6600SQI-6 T-bar Lay-in Insulated 3/4 2 8
6600SQ-8 Tegular T-bar 1 3 10
24 x 24
6600SQI-8 Tegular T-bar Insulated 4 12
6600SQ-9 Donn Fineline 1 14
1 1/2
6600SQI-9 Donn Fineline Insulated 2
LINEAR DIFFUSERS
20 White Face w/ Black PC G3 Equlaizing Grid
AND GRILLES
Optional BDS Butterfly Damper
21 Clear Anodize Face w/ Black PC RSD Radial Shutter Damper
28 Custom Color TBPF T-Bar Plaster Frame
6600SQ
3 Slot
Pt 0.028 0.042 0.055 0.074 0.090 0.117
12" Inlet
Ps 0.023 0.035 0.046 0.061 0.074 0.094
NC - - 20 25 29 34
CFM 250 300 350 400 450 500
Throw 4-5-10 5-7-13 6-8-15 7-10-19 7-11-20 8-12-22
4 Slot
Pt 0.034 0.048 0.059 0.071 0.091 0.107
8" Inlet
Ps 0.027 0.038 0.045 0.55 0.68 0.081
NC - 20 23 27 30 33
LINEAR SLOT DIFFUSERS
6600SQ
LDG108 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 6600SQ PERFORMANCE DATA
MODEL 6600SQ 3/4" SLOT WIDTH
CFM 50 100 150 200 250 300
Throw 2-3-5 3-5-9 4-8-13 6-10-16 8-12-18 10-15-20
1 Slot
Pt 0.013 0.039 0.083 0.145 0.219 0.319
6" Inlet
Ps 0.011 0.033 0.071 0.125 0.187 0.272
NC - - 20 28 32 39
CFM 100 150 200 250 300 350
Throw 2-4-7 3-6-10 5-8-13 6-10-16 7-12-18 8-14-20
2 Slot
Pt 0.015 0.033 0.068 0.087 0.124 0.172
10" Inlet
Ps 0.013 0.026 0.049 0.074 0.105 0.145
NC - - 20 24 26 31
CFM 150 200 250 300 350 400
LINEAR DIFFUSERS
Throw 3-4-9 4-5-12 5-7-15 6-9-17 7-11-19 8-13-22
AND GRILLES
3 Slot
Pt 0.023 0.040 0.051 0.078 0.117 0.149
10" Inlet
Ps 0.018 0.031 0.048 0.059 0.090 0.115
NC - - 22 25 28 32
CFM 200 250 300 350 400 450
Throw 3-4-8 4-5-11 6-9-15 7-10-18 8-11-20 8-13-22
4 Slot
Pt 0.025 0.038 0.064 0.075 0.092 0.117
12" Inlet
Ps 0.021 0.031 0.044 0.062 0.075 0.094
NC - - - 22 25 28
3 Slot
Pt 0.042 0.088 0.146 0.187 0.222 0.312
8" Inlet
Ps 0.036 0.076 0.125 0.16 0.19 0.265
NC - - 21 27 35 43
CFM 150 200 250 275 300 350
Throw 3-5-6 5-7-8 7-10-12 8-11-14 9-13-17 11-15-21
4 Slot
Pt 0.061 0.103 0.153 0.191 0.209 0.282
10" Inlet
Ps 0.056 0.094 0.14 0.175 0.19 0.255
NC - 22 28 32 37 40
LINEAR SLOT DIFFUSERS
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Horizontal throw Throw distance in feet at terminal velocities of 150, 100 and 50fpm.
NC Noise criterion, sound pressure level. NC ratings are based on sound power level
(Lw) re: 10-12 watts minus a 10 dB room attenuation in all octave bands
Ps Static pressure = PtPv (inches of water column)
Pt Total pressure (inches of water column)
Pv Velocity pressure (inches of water column)
fpm Velocity of air stream in Feet per Minute
6600SQ
LDG110 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
MODEL UP-6600
Model UP-6600 Boot Plenum is an easily installed, economical
accessory to the 6600 Linear Slot Diffuser. UP-6600 Boot Plenums
are designed to connect the series 6600 to the ducted supply or
return. Factory supplied units reduce both job site fabrication and
installation labor.
Units provide an even distribution of air into the diffuser to maximize inductions and occupant comfort
UPI-6600 is fully insulated including the end caps. Optional Thermopure insulation is available.
LINEAR DIFFUSERS
remote operated damper
AND GRILLES
Architectural Linear
UP-6600 is shipped Diffusers
separately from the 6600 linear slot diffuser and requires field attachment
LBG - Linear Bar Grilles Plenum
Models: UP/UPI Universal Plenum
W 1
2 1/8 2
1
2 A
Optional
Plenum Length = Listed Size
Internal
Insulation Inlet Chart
Size TypeInlet Chart
A B
6 Round 5 7/8
Size Type A B
8 Oval 5 7/8 8 15/16
3/8 1/4 10 6 Round
Oval 5 57/8
7/8 12 1/16
12 8 Oval 5 7/8 15 1/4
Oval 5 7/8 8 15/16
14 Oval 5 7/8 18 7/16
10 Oval 5 7/8 12 1/16
12 2000H,2100H,
Oval 5 7/8 15 1/4 2000H, 2100H,
2300H, 2400H 2300H, 2400H
UP6600
40-7/42-7 50-152-1
AND GRILLES
Frame Styles
Length = L =Listed Size Linear End Types
Description UP/UPI Border Size 2 EB 1 EB No Ends 2 EC 1 EC
T-Bar Lay-in 10 - 6 1 - 1/8 -2 1/2 -1 3/8 0 - 3/16 -7/8
Screw Mount 11 - 1 Not Recommended For This Frame Style
Concealed Mount 12 - 1 1 - 1/8 0 0 0 NR** NR**
T-Bar Lay-in 20 - 6 3/4 -1 3/4 -1 0 NR** NR**
T-Bar Lay-in 30 - 6 1/2 -1 1/4 -3/4 0 NR** NR**
Concealed Spline 40 - 7 22/32 -7/8 -9/16 0 NR** NR**
UP6600
LDG112 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
UP6600 MODEL NUMBER SPECIFICATION
MODEL UP6600
Mounting Styles Border Width T-bar Lay-in Surface Mount Concealed Spline Drop Face Narrow Tee Mud Flange
Screw Mounted 1 1/8 UP6600-11-1
1 1/8 UP6600-12-6 UP6600-12-1
3/4 UP6600-22-6
Concealed Mtg Hardware 1/2 UP6600-32-6
25/32 UP6600-42-7 UP6600-42-8 UP6600-42-9
1-13/16 UP6600-52-1
1 1/8 UP6600-10-6
3/4 UP6600-20-6
No Mtg. Hardware 1/2 UP6600-30-6
25/32 UP6600-40-7 UP6600-40-8 UP6600-40-9
LINEAR DIFFUSERS
1-13/16 UP6600-50-1
AND GRILLES
Concealed Spline Concealed Wall Mtg Plaster Concealed Wall Mounting
Plaster Mtg Frame Spline Plaster Mtg Frame Wall Mtg Frame
3/4" Border UP6600-22-73 3/4" Border UP6600-22-74 3/4" Border UP6600-22-75
1-13/16 UPI6600-50-1
NC <15 18 27 33 38 42 44
8" Inlet
AND GRILLES
NC <15 22 29 34 39 42 43
LINEAR SLOT DIFFUSERS
NC 24 28 32 35 39 42 45
CFM 90 120 150 180 210 240 270
4' Length
LDG114 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 6600 UP/UPI PERFORMANCE DATA
MODEL UP/UPI-6650 2 SLOT
CFM 20 40 60 80 100 120 140
2' Length
LINEAR DIFFUSERS
NC <15 <15 23 29 35 39 43
8" Inlet
AND GRILLES
CFM 50 90 130 170 210 250 290
4' Length
NC <15 17 23 29 34 38 41
NC <15 17 21 24 28 31
CFM 100 140 180 220 260 300 340
4' Length
NC <15 <15 21 28 33 37 41
8" Inlet
AND GRILLES
NC <15 <15 21 27 32 36 39
LINEAR SLOT DIFFUSERS
NC <15 16 20 23 26 29 32
CFM 130 170 220 270 320 370 420
4' Length
LDG116 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 6600 UP/UPI PERFORMANCE DATA
MODEL UP/UPI-6650 4 SLOT
CFM 40 65 90 115 140 165 190
2' Length
LINEAR DIFFUSERS
NC <15 17 24 30 35 39 42
8" Inlet
AND GRILLES
CFM 75 120 165 210 255 300 345
4' Length
NC <15 17 23 29 33 37 41
NC <15 <15 20 24 28 32 35
CFM 120 180 240 300 360 420 480
4' Length
NC <15 17 24 30 35 39 41
8" Inlet
AND GRILLES
NC <15 17 22 26 30 33 35
LINEAR SLOT DIFFUSERS
NC <15 16 20 23 26 29 32
CFM 130 170 220 270 320 370 420
4' Length
LDG118 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 6600 UP/UPI PERFORMANCE DATA
MODEL UP/UPI-6675 2 SLOT
CFM 30 55 80 105 130 155 180
2' Length
LINEAR DIFFUSERS
NC <15 <15 23 29 35 39 43
8" Inlet
AND GRILLES
CFM 70 100 130 160 190 220 250
4' Length
NC <15 17 22 27 32 35 38
NC <15 18 21 25 28 31 34
CFM 110 145 180 220 255 295 330
4' Length
NC <15 18 25 30 35 39 42
8" Inlet
AND GRILLES
NC <15 19 25 30 34 38 41
LINEAR SLOT DIFFUSERS
NC <15 <15 18 22 26 30 33
CFM 130 180 235 285 340 390 445
4' Length
LDG120 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 6600 UP/UPI PERFORMANCE DATA
MODEL UP/UPI-6675 4 SLOT
CFM 50 80 110 140 170 200 230
2' Length
LINEAR DIFFUSERS
NC <15 18 24 29 33 37 39
8" Inlet
AND GRILLES
CFM 105 150 195 240 285 330 375
4' Length
NC <15 17 23 27 32 35 38
NC <15 16 20 23 26 29 32
CFM 150 210 270 330 390 450 510
4' Length
NC 17 22 28 33 38 40 42
8" Inlet
AND GRILLES
NC 16 24 30 35 38 39 39
LINEAR SLOT DIFFUSERS
NC <15 <15 19 23 26 29 32
CFM 70 100 120 145 165 190 210
4' Length
LDG122 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 6600 UP/UPI PERFORMANCE DATA
MODEL UP/UPI-6610 2 SLOT
CFM 30 55 80 105 130 155 180
2' Length
LINEAR DIFFUSERS
NC <15 18 24 29 33 37 40
8" Inlet
AND GRILLES
CFM 70 100 130 160 190 220 250
4' Length
NC <15 17 22 27 32 35 38
NC <15 17 21 26 29 33 36
CFM 90 135 180 225 270 315 360
4' Length
NC <15 17 24 29 34 38 42
8" Inlet
AND GRILLES
NC <15 21 27 32 36 39 42
LINEAR SLOT DIFFUSERS
NC <15 <15 19 23 28 31 35
CFM 120 180 240 300 360 420 480
4' Length
LDG124 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 6600 UP/UPI PERFORMANCE DATA
MODEL UP/UPI-6610 4 SLOT
CFM 50 80 110 140 170 200 230
2' Length
LINEAR DIFFUSERS
NC <15 18 24 29 33 37 39
8" Inlet
AND GRILLES
CFM 105 150 195 240 285 330 375
4' Length
NC <15 19 26 32 36 40 42
NC <15 16 21 25 28 32 35
CFM 135 210 285 360 435 510 585
4' Length
DEFINITION OF UNITS
1. On units without BP/BPI plenums, pressure drop reported is across the diffuser element only
The field supply plenum pressure drop should be included when determining system fan requirements
A good approximation of the static pressure requirements can be calculated by adding the velocity
pressure through the plenum inlet to the diffuser section pressure drop
2. NC is based on a 4 ft. section of diffuser
The following table should be used to calculate sound levels for lengths other than 4 ft.
3. To correct throws for lengths other than the 4 ft. lengths used in determining catalog performance,
throws should be adjusted per the following table
LDG126 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
MODEL UP/UPI-6660 RETURN PERFORMANCE DATA
Number of Slots Negative Ps Inches of Water .020 .040 .060 .080 .100 .150
CFM/FT 15 20 25 30 35 40
1
NC - 20 27 32 37 41
CFM/FT 35 50 60 70 80 95
2
NC - 22 27 32 37 41
CFM/FT 55 80 95 110 125 150
3
NC - 23 28 33 37 42
CFM/FT 70 100 120 140 155 190
4
NC - 24 30 34 37 44
CFM/FT 90 135 155 180 200 245
5
NC - 25 30 34 37 44
LINEAR DIFFUSERS
CFM/FT 110 155 195 220 245 300
6
AND GRILLES
NC - 26 33 37 40 96
CFM/FT 130 185 225 260 290 365
7
NC - 27 33 37 41 47
CFM/FT 140 200 245 280 310 385
8
NC - 28 34 38 42 48
NC - 33 40 43 47 53
CFM/FT 245 350 425 490 545 665
7
NC - 34 41 44 47 54
CFM/FT 280 400 475 560 620 760
8
NC - 35 42 45 48 55
LINEAR SLOT DIFFUSERS
UP6600
LDG128 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
LINEAR BAR GRILLES
The METALAIRE line of linear bar grilles is designed for installation in sidewall, sill or floor and
can be used for supply or return air.
LINEAR DIFFUSERS
AND GRILLES
2000 Bar Grilles. The 2000 series of linear bar grilles and registers is
constructed of high grade aluminum extrusion and is available in a variety of
core and border styles.
2000 1" border 7/32" bars 1/2" centers
2100 1/2" border 7/32" bars 1/2" centers
2200F 3/16" border 7/32" bars 1/2" centers
Non Flanged Floor Mounting Non Flanged Floor Mounting Pencil Proof
2200F - 0 Deflection 2200FP - 0 Deflection
2215F - 15 Deflection 2215FP - 15 Deflection
2230F - 30 Deflection 2230FP - 30 Deflection
LDG130 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
Series 2300 - 1 borders - 1/8 bars - 1/4 centers
Wall Mounted Core Only Floor Mounted
2300 - 0 Deflection 2300CO - 0 Deflection 2300F - 0 Deflection
2315 - 15 Deflection 2315CO - 15 Deflection 2315F - 15 Deflection
2330 - 30 Deflection 2330CO - 30 Deflection 2330F - 30 Deflection
LINEAR DIFFUSERS
2400 - 0 Deflection 2400H - 0 Deflection 2400HC - 0 Deflection
AND GRILLES
2415 - 15 Deflection 2415H - 15 Deflection 2415HC - 15 Deflection
2430 - 30 Deflection 2430H - 30 Deflection 2430HC - 30 Deflection
1
12
Beveled
Border (Typ.)
1 3 1
Listed Length - 2
1 Listed Width-2 16 1 1
1
Listed length + 1 2
1
Listed Width + 1 2
Models: 2000 F, 2015 F, 2030 F, 2000 FP (Pencil Proof), 2015 FP (Pencil Proof), 2030 FP (Pencil Proof) ( Floor /Wall/Sill Mounting )
Duct =
Listed Width
Listed Side View
Width - 41 Duct Length = Listed Length
Listed Length - 41
1 1
1 16 x 8 Reinforcement Bars
2 13
16
Core Friction on Approximately 9" Centers
Alignment Spline (Typ.)
Retainer Spring For Continuous Runs
Listed 3 Beveled
1 1 16 Removable Core (Typ.)
Width - 2 Border (Typ.)
LINEAR BAR GRILLES
1
Listed Width + 1 2
1
* 12" Maximum Available Width 1 Listed Length - 2 1
1
Listed length + 1 2
Models: 2000H, 2015H, 2030H ( Concealed Mounting Hanger )
Side View
Duct Length = Listed Length
Listed Length - 41 Alignment Spline (Typ.)
For Continuous Runs
5 34
43 3 Beveled
8 16 Border (Typ.)
1
Listed Length - 2
1 41 1 1
1
Listed length + 1 2
1 Listed Width - 21
Listed Width + 1 21
2000
Models: 2000 HP, 2015 HP, 2030 HP ( Spline Subframe For Plaster Wall & Ceilings )
9
Duct = Listed Width + 16
Listed Width - 41
Side View
9
5 34 Duct Length = Listed Length + 16
43 Listed Length - 41 Alignment Spline (Typ.)
8
For Continuous Runs
3
1 41 16
Beveled
Border (Typ.)
1
Listed Length - 2
1 1
Listed Width - 21 1
Listed length + 1 2
Listed Width + 1 21
Revision: C
LDG132 Date: 11/2013 Dimensions are in Inches Page: 1 of 2
Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
Metal Industries, Inc. Clearwater, FL (727) 441 - 2651 Fax (800) 865 8383 www.metalaire.com sales@metalaire.com
Submittal: 2000/CO
Linear Bar Grilles - Core Only 2000/2100 2000P/CO
Extruded Aluminum - 7/32" Bars On 1/2" Centers
Models: 2000-CO 2000P-CO 0 Deflection
2015-CO 2015P-CO 15 Deflection
2030-CO 2030P-CO 30 Deflection
LINEAR DIFFUSERS
2"
Width 3 8" 15 14" 27 20" 39
Overall Length =Bars Width
Specified Length Bars 13 Width Bars
1 8128
Width Bars
AND GRILLES
2 1/2" 4 8 1/2" 16 14
32 1/2" 20 1/2" 40
1 1/2 2 7 1/2 14 13 1/2 26 19 1/2 38
3" 5 9" 17 15" 29 21" 41
13
2
3 1/2" 63 8
9 1/2" 1815 14
15 1/2" 3027 8 20
21 1/2" 4239
4"
2 1/2 74 10"
8 1/2 1916 16"
14 1/2 3128 22"
20 1/2 4340
4 1/2" 8 10 1/2" 20 16 1/2" 32 22 1/2" 44
5"
3
9
5 Available
11"
9 Overall
21
17 Width
17" (Inches)
15
33
29
23"
21
45
41
5Width
3 1/2
1/2" Bars
106 Width
11 91/2"
1/5 Bars
2218 Width
1715 1/3
1/2" Bars
3430 Width
2321 1/2
1/2" Bars
4642
1 1/2"
6"4 2
11 712"
1/2" 14
23 1318"
1/2" 26
35 1924"
1/2" 38
4743
7 10 19 16 31 22
2"
6 1/2" 3
12 12 8"1/2" 15
24 1814"
1/2" 27
36 20"
- 39
-
4 1/2
2 1/2" 4 8 10
813"
1/2"1/2 1620 16
1419" 1/2
1/2" 2832 22 1/2
20 1/2" 40 44
7" 13 25 37 - -
3"5 59 9"11 1721 15"
17 2933 21"23 4145
2000P-CO
3 1/2" 2015P-CO
6 9 1/2"2030P-CO 18 152000P-CO
1/2" 30 2015P-CO21 1/2" 2030P-CO
42
5 1/2 10 11 1/2 22 17 1/2 34 23 1/2 46
4" 9 7 10" 19 16" 31 15
22" 43
6 32 30
811 12 2023 18 153235 24 4447 30
04 Clear Anodized
0 Deflection 15 Deflection 30 Deflection 0 Deflection 15 Deflection
as separate30 Deflection
non-connected
28 Custom Color / Setup Charge
Pencil Proof Pencil Proof Pencil
sections. For lengths Proof
less than
72", round up to the next listed size.
Notes: (check if provided)
1. Available Finishes 2. Available Accessories 3. Available Options 4. Construction Details
Revision: B
Standard Finish: Date: 11/2013 Dimensions are in Widths
Inches Page:
available 1 of 1
in 1/2" increments
01 White.
Metal Industries, Inc. Clearwater, FL (727) 441 - 2651 Fax (800) 865 8383 www.metalaire.com
from 1 1/2" to 24" for Series 2000-CO.
sales@metalaire.com
Optional Finish (extra charge): Length available in single pieces
02 Satin Silver. up to 72".
03 Black. Longer sections are available only
04 Clear Anodized
as separate non-connected
28 Custom Color / Setup Charge
sections. For lengths less than
72", round up to the next listed size.
11
116 Alignment Spline (Typ.)
For Continuous Runs
1 1
2 Typ.
2
Flat Border (Typ.) Listed Length - 21
Listed Width - 21
Listed Length + 21
Listed Width + 21
Side View
LINEAR DIFFUSERS
438
278
11
116
1 1
Typ.
2 4
Flat Border Listed Length - 21
Listed Width - 21 Listed Length + 21
Listed Width + 21
Side View
LINEAR BAR GRILLES
11
Listed Length + 16
Duct Length = Listed Length
534
Listed Length - 41
438
278
11 2
116
1 3
4
1 1 Listed Length - 21
2 4 Typ.
Alignment Spline (Typ.) Listed Length + 21
Listed Width - 21
11
For Continuous Runs Listed length + 15
516 16
615
16
Note: For Air Deflection Patterns and Face View see Page 3
Metal Industries, Inc. Clearwater, FL (727) 441 - 2651 Fax (800) 865 8383 www.metalaire.com sales@metalaire.com
LDG134 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
Submittal: 2100
Linear Bar Grilles / Registers - 1/2" Border
Extruded
Linear BarAluminum - 7/32" Bars
Grilles / Registers - 1/2"
- 1/2" Center
Border
Extruded
Models: Aluminum
2100HW 2115HW- 7/32" Bars -Narrow
2130HW 1/2" Center
Subframe - 0/15/30 Deflection
Models: 2100HC
2100HW 2115HC
2115HW 2130NC
2130HW Combination Subframe
Narrow Subframe - 0/15/30
- 0/15/30 Deflection
Deflection
2100HC 2115HC 2130NC Combination Subframe - 0/15/30 Deflection
LINEAR DIFFUSERS
Duct=Listed Width + 16 Side View
9
Duct=Listed Width
Listed Width - 41+ 16 Side View 9
AND GRILLES
Duct Length = Listed Length + 16
Listed Width - 41 9
Duct Length
Listed= Length
Listed Length
- 41 + 16
Listed Length - 41
5 34
4 5 34
2 34
2 3
4
4 Submittal:
1
2
1
2200
1
2 Listed Length - 41
Linear Bar Grilles - Removable Core
1 - 1/2" Centers 1
Listed Length -11
Extruded Aluminum - Non 1 Flanged Floor Mounting
4
Listed length + 16
11
Listed length + 16
2
Models: 2200 F 0 Deflection
1 - 7/32" Bars - Floor Frame
2215 F Listed Width
15 2- 1
Deflection - 7/32" Bars - Floor Frame
2
2230 F Listed Width - 111
30 Deflection - 7/32" Bars - Floor Frame
Listed Width + 216
2200 FP 0 Deflection
11- 17/64 Bars - Floor Frame - Pencil Proof
Listed Width + 16
13
8
1
Listed Length - 34 2
Duct Length = Listed Length
0 Deflection 15 Deflection 30 Deflection
Side View
Duct Length = Listed Length
Listed Length - 41
5 34
LINEAR DIFFUSERS
3 (Typ.)
Alignment Spline (Typ.) 16
3 9
AND GRILLES
Submittal: 2300/2400 CO
9
Duct Length = Listed Length + 16
Submittal: 2300/2400
Submittal: CO Listed Length - 41
2300/2400 CO
LINEAR BAR GRILLES
53
4 Linear Bar Grilles - Core Only
Extruded Aluminum - 1/8" Bars - 1/4" Center 3 (Typ.)
Linear Bar Grilles - Core Only 16
Extruded LinearModels:
Bar Grilles - 1/4"
2300/2400Core
CO Only
0Spline
Deflection
3 5 Aluminum - 1/8" Bars - Alignment Center (Typ.)
16 Extruded Aluminum - 1/8"
2315/2415 CO 15Bars - 1/4" Center
Deflection For Continuous Runs
Models: 2300/2400 CO 2330/2430 CO 30 Deflection
0 Deflection 1
1 0 Deflection
Models: 2300/2400 CO Beveled 1 Listed Length - 2 1
2315/2415
14 CO 15 Deflection
2315/2415 CO Border (Typ.)
15 Deflection 71
Listed Length +1116
2330/2430 CO 30 Deflection
2330/2430 CO 30 Deflection
2
1 (Typ.)
8 11
1 Face View (all models)
Listed Width - 2 A 7
1 16 7
1 1 16
Listed Width + 1 2
1
18 1 81
A A Width*
Models
B Available B
Grilles Registers Deflection
2300 2300 H 2300 HP 2300 DA 2300 HDA 2300 HPDA 0 A 1 Width*
2315 2315 H 2315 HP 2315 DA 2315 HDA 2315 HPDA 15 4 Typ. 3 Width*
16
B
2330 B HP 2330 DA 2330 HDA
2330 H 2330 Face View
2330 HPDA(All Models)
30
B B Face Section A-A
Screw Mount - AllShown
Option Models
2000
1 8 8
Models Available * Available
8 Overall Width (Inches)
LDG136 1 1 1/2 2Registeres
Grilles 2 1/2 3 3 1/2 4Metal
1/2 Industries,
5 5 1/2 Inc.
4Deflection 6 6For1/2
7 7 1/2 8 8 1/2 9 9 1/2 10 10 1/2 11 11 1/2 12 1 3 Typ.
complete product specifications and submittal data, visit us at www.metalaire.com
Models Available 8
2300 / 2400 2300 0 Number of Bars 3
Models: 2300F, 2315F and 2330F ( Standard Spring Clip Mount )
Linear Bar GrillesEnd View Side View
Extruded Aluminum - 1/8" 1Bars on 1/4" Spacing 1
Listed Length + 1 2
Listed Width + 1 2 1
Model: 2300 F Floor / Sill / Sidewall Linear Bar Grille 1/8" on11/4" spacing 0 Deflection
1 Listed Length - 2 1
Listed Width - 2
2315 F Floor / Sill / Sidewall Linear Bar Grille 1/8" on 1/4" spacing 15 Deflection
1 (Typ.) Removeable Core (Typical)
2330 F Floor / Sill / Sidewall Linear Bar Grille 1/8" on 1/4" spacing 30 Deflection
1
12 Beveled 3
Border (Typ.) 16
(Typ.)
Models: 2300F, 2315F and 2330F
1 Alignment
( Standard Spring Spline) (Typ.)
Clip Mount
Listed Width - 4 Core Friction
End View For Continuous Runs 1 1/16 Side
X 1/8View
Reinforcement Bars
Duct =Listed Width 1 Retainer Spring
1
Snap-In Friction Spring Listed Length + 1 2
on Approximately 9" Centers
Listed Width + 1 2 1
Listed Length - 2
1
Listed Width - 2
1 Listed Length - 41 1
Models: 2300
1 1 F/H ( Concealed Mounting ) Beveled 3
2 16
End View Border (Typ.) (Typ.)
1 1 Alignment Spline (Typ.)
ListedWidth
Listed Width +- 4
12 Core Friction
For Continuous Runs 1 1/16 X 1/8 Reinforcement Bars
Duct =Listed Width
1
Retainer Spring
Listed Width - 2 Snap-In Friction Spring on Approximately 9" Centers
1 (Typ.) Listed Length - 41
Duct Length = Listed Length
3
4 Min. Beveled
Models: 2300 F/H ( Concealed Mounting ) Border (Typ.)
End View Alignment Spline (Typ.)
4
1
Listed Width + 1 2 For Continuous Runs
5 34 1
Listed Width - 2
1 (Typ.)
* Available Overall Width (Inches)
LINEAR DIFFUSERS
3
4 Min. Beveled 1 1/2 2 2 1/2 3 3 1/2 4 4 1/2 5 5 1/2 6 6 1/2 7 7 1/2 8 8 1/2 9 9 1/2 10 10 1/2 11 11 1/2 12
AND GRILLES
Border (Typ.) Number of Bars
4 Alignment Spline (Typ.)
5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47
For Continuous Runs
5 34 Listed Width - 41
Duct =Listed Width
* Available
Options: 0, 15 Overall Width (Inches)
or 30 Deflection
1 1/2 2 2 1/2 3 3 1/2 4 4 1/2 5 5 1/2 6 6 1/2 7 7 1/2 8 8 1/2 9 9 1/2 10 10 1/2 11 11 1/2 12
15 30
Number
8
1 of Bars
1
5 7 9 11 13 15 8 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47
Listed Width - 41 13
8
Duct =Listed Width
1
Options: 0, 15 or 30 Deflection
4
1
0 Deflection
1
8 1515Deflection 30
30 Deflection
8
13
Notes: (check if provided) 8
Metal Industries, Inc. Clearwater, FL (727) 441 - 2651 Fax (800) 865 8383 www.metalaire.com sales@metalaire.com
11
116
Alignment Spline (Typ.)
For Continuous Runs
1 1
4
2
Flat Border (Typ.) Listed Length - 21
Listed Width - 21
Listed Length + 21
Listed Width + 21
534
LINEAR DIFFUSERS
438
AND GRILLES
278
11
116 Listed Length - 21
Listed Length + 21
1 1
2 4
Flat Border
Listed Width - 21
Listed Width + 21
Models: 2400HP, 2415HP, 2430HP (Concealed Spline Mounting Frame - 0 / 15 / 30 Deflection)
9
Listed Width + 16
Duct Size = Listed Width
Listed Width - 14 Side View
11
Listed Length + 16
Duct Length = Listed Length
Listed Length - 41
LINEAR BAR GRILLES
534
438 2
3
278 4
11
116
1 Listed Length - 21
1 1 Listed Length + 21
2 4
Listed Width - 21 Listed length + 15
Alignment Spline (Typ.) 16
11
516 For Continuous Runs
Models: 2400 HW, 2415 HW, 2430 HW (Narrow Mounting Frame - 0 / 15 / 30 Deflection)
9
Listed Width + 16
Duct Size = Listed Width Side View
Listed Width - 14
11
Listed Length + 16
Duct Length = Listed Length
Listed Length - 41
2000
534 2
438
278
11
116 Listed Length - 21
1 Listed Length + 21
1 1
2 4
Listed Width - 21 Alignment Spline (Typ.)
11
516 For Continuous Runs
LDG138 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
Models: 2500 2515 2530
Submittal: 2500
Wall Mounting - 0/15/30 Deflection
2500H 2515H 2530H Concealed Mounting Hangers - 0/15/30 Deflection
Bar Grilles
g/Sidewall Mounting/Aluminum Construction Submittal:
Submittal:
2500 2500
2500HP 2515HP 2530HP Concealed Spline Mounting Frame With Hangers - 0/15/30 Deflectio
Submittal: 2500
near2500
Bar
Linear 2515
Bar Grilles2530
Grilles Submittal:
Wall Mounting - 0/15/30 Deflection 2500
Linear2515H
2500H
eiling/Sidewall Bar
Ceiling/SidewallGrilles 2530H
Mounting/Aluminum
Mounting/Aluminum Concealed
Construction Mounting Hangers - 0/15/30 Deflection
Construction
inear Ceiling/Sidewall
Bar
2500HP Grilles
2515HP Mounting/Aluminum
2530HP Concealed Construction
Spline Mounting FrameDeflection
With Hangers - 0/15/30 Deflection
dels: 2500
Models: 25002515 2515
2530 Wall Mounting
2530 Wall - Mounting
0/15/30
- 0/15/30
Deflection
eiling/Sidewall
Models:
2500H Mounting/Aluminum
2500
Models:2500H
2515H
2500, 2515
2515H
2515, 2530 2530H
(Wall 2530
Mounting2530H
Construction
- Concealed Wall Mounting
Concealed
Mounting
0 / 15 / 30 Deflection) - 0/15/30
Hangers
Mounting Deflection
- 0/15/30
Hangers - 0/15/30
Face View (all models)
Deflection Deflection
odels: 2500HP
2500 2500H
2500HP
2515HP 2515H
2515 Duct2515HP
2530HP
2530
=Listed Width 2530H
2530HP
Concealed
Wall Concealed
Concealed
Spline
Mounting
Snap-In Friction
Mounting
Mounting
Spline
- 0/15/30
Spring
Hangers
Frame
Mounting - 0/15/30
WithFrame
Deflection Hangers Deflection
With- 0/15/30
Hangers Side View
- 0/15/30
Deflection Deflection
Duct Length = Listed Length
2500H 2500HP
2515H 2515HP
Listed
2530H
1
Width - 4 2530HP
Concealed Concealed
Mounting
Alignment Spline
Spline Mounting Frame With Hangers
(Typ.) Hangers - 0/15/30 Deflection
- 0/15/30 1
Listed Length - 4
Deflection
2500HP 2515HP
1
2530HP Concealed Spline Mounting Frame With Hangers - 0/15/30 Deflection
For Continuous Runs
12 Beveled 3
Face View (all models)
els: 2500, 2515, 2530 (Wall Mounting - 0 / 15 / 30 Deflection) Border (Typ.) 16
Side View (Typ
Duct =Listed Width 1 (Typ.)
Snap-In Friction Spring Face View
Duct (all models)
Length Face View Length
= Listed (all models)
Models: 2500, 2515,
Models:
2530
Listed 2500,
Width 1 2515,
(Wall
-4 Mounting
2530 - (Wall
0 / 15
Listed Mounting
/ 30
Width -21Deflection)
- 0 / 15 / 30 Deflection)
Alignment Spline (Typ.) ListedFace
Side View View
Length
Side- 41View
(all models) 1
1 -10 / 15
Models: 2500, 2515,
Duct =Listed 2530
Width Duct (WallWidth
=Listed Mounting
Width + Friction / 30 Deflection) 1 Listed Length - 2 1
Listed Snap-In Spring
Snap-In
For Continuous Friction Spring
1 Listed Width - 4 Duct 1
Listed Width Width
-4 1 2 Runs Duct Length = Listed Length
Duct
Face View (all models)
Length
Side= View
Listed Length
=Listed 1
1Models: 2500, 2515, 2530 (Wall Mounting - 0 /Alignment
Beveled Snap-In
151 / 30 Deflection)(Typ.) Friction
SplineAlignment SplineSpring
(Typ.) - 41 Listed
Listed Length Duct LengthLength - 41Length
= Listed Listed Length + 1 2 3
2 Listed Width - 4Continuous Runs
For
Border (Typ.) For Continuous
Alignment SplineRuns
(Typ.) Side View Listed Length - 41 16
121 Models:
Duct2500H,
12
=Listed
1 2515H,
Width 2530H (Concealed
Snap-In Mounting
Friction Spring Hangers - 0 / 15 / 30 Deflection) (Typ.)
1 Beveled Beveled
For Continuous Runs Duct Length = Listed Length 3 3
Listed1 Width - 4 1 (Typ.) 16 16
12 Duct Border
=ListedAlignment(Typ.)Spline
Width Border
(Typ.)
Beveled (Typ.) Listed Length - 41 3
Listed Width - 2 1 (Typ.) (Typ.)
For Continuous1Border
1 (Typ.) Runs
(Typ.) (Typ.) 16
1 Listed Width - 41 1
+ 1- 211 Listed Width -Beveled
12 1 1 Listed Length - 2 13 (Typ.)
ListedListed
Width Width 1 (Typ.)
2 2
Border 1 Listed Length - 1 Side View 16
1Listed Width 1 1 (Typ.) 1 1 Listed Length - 2 1 12 (Typ.) 1
Listed Width + 1 Listed Width -+2 1 Listed Length + 1 2
2 1 (Typ.)2 Duct Length1 = Listed Length
1 1 Listed Length + 1 1Listed Listed Length -12 1
els: 2500H, 2515H, 2530H (Concealed 1 Listed Width Hangers
Mounting +1 2 - 0 / 15 / 30 Deflection) Length + 1 2
Listed Width - 2 2 Listed
1 Length - 41
Models: 2500H, 2515H,
Models: 2530H
2500H,(Concealed
2515H, 12530H Mounting
(ConcealedHangersMounting
- 0 / 15Hangers
/ 30 Deflection)
- 0 / 15 / 30 Deflection) Listed Length - 2 1
Listed Length + 1
Listed Width + 1 1 12
Duct =Listed Width 22530H (Concealed Mounting Hangers - 0 / 15 / 30 Deflection)
Models: 2500H,Width
2515H,
LINEAR DIFFUSERS
Duct =Listed Duct =Listed Width 1
3 Width - 1
Listed Listed Length + 1 2 3
5 4 Listed Width
4
- 41 Duct
Listed - 41
Width Width
=Listed 16 (T
Models: 2500H, 2515H, 2530H (Concealed Mounting Hangers - 0 / 15 / 30 Deflection) Side View
AND GRILLES
9 Listed Width - 41
Alignment Spline (Typ.) Side View Side View
3
16 =Listed Width
Duct For Continuous Runs Duct Length = Listed Length
Duct Length = Listed
Duct
Length Side
Length View Length
= Listed
Listed Width - 41 1
1 Beveled Listed
Listed Length - 41Length
1Duct Listed- Length
Length 4= Listed Listed Length - 1
- 41Length
2 1
14 Border (Typ.) Side View
Listed Length - 41 1
Duct Length = Listed Length Listed Length + 1 2
53 53 1 (Typ.)
3 (Typ.) 3 (Typ.)
3 (Typ.)
4 4 Listed Length - 41 16 16 16
3 9 53
43 9
Alignment
Alignment
Listed Width -Spline1SplineAlignment
(Typ.)
(Typ.) Spline (Typ.) 3
16 (Typ.)
3 9 16 16 For Continuous 2 Runs
For Continuous Runs
16 9 For Continuous 1 Alignment
Runs Spline (Typ.)
53 3 Listed Width + 1 2 3
4 16 Beveled For Continuous Runs
Beveled 1
1
1 Listed Length - 2 Listed Length -21
1 16 (Typ.)
1
11 1 41 Beveled Listed Length - 2
1 / 15 / 30 Deflection)
1
1
1 41 3 9 4 Models: 2500HP,
1 2515HP, Alignment
Border
2530HP
Border (Typ.)
SplineBorder
(Typ.)
(Concealed (Typ.) (Typ.) Mounting Frame With Hangers - 0
Spline
Beveled 1 Listed LengthListed
+ 1 1
Length
Listed
1
-2
Length + 1 1 1
16 14 For Continuous Runs Border (Typ.) 2
Listed Length + 1 2 1 Side2 View
1 (Typ.) 1 (Typ.) 1
1 Duct =Listed Beveled
Width
1
9
+ 16 1 Listed Length - 1 Listed
DuctLength
1
+ 1=2
Length Listed Length + 9
1 41 Listed Width - 2 Listed1Width
(Typ.)-2
Border (Typ.) 1 (Typ.)
2
1
16
1 Listed Width 1 1 Listed Length - 4
Listed Listed - 2 + 1 1 Listed
WidthWidth Width +- 11 -2
1 Listed Length + 1 2
2 2 4
Listed Width + 1 2 1 1 (Typ.)1
Models: 2500HP,Models:
2515HP, 2500HP,
2530HP Listed Width +(Concealed
1Mounting
Listed Width2515HP,
(Concealed
-1 2530HP
2
Spline 2 Spline
Frame Mounting
With Hangers
Frame
- 0With
/ 15Hangers
/ 30 Deflection)
- 0 / 15 / 30 Deflection)
Side View Side View 3
Models:
els: 2500HP, 2515HP, 2500HP,
2530HP 2515HP,
(Concealed
1 2530HP
Spline (Concealed
Mounting Spline Mounting
Frame Frame-With
With Hangers Hangers
0 / 15 / 30-Deflection)
0 / 15 / 30 Deflection) 16
Listed Width +1
9 9
+ 162=Listed Width + 16
Duct =Listed Width Duct Duct Length = Listed
Duct
Length + 9= Listed
Length
Side View Length +
9
Side View 16 16
: 01 (check if01provided)
Optional Finish (extra charge): Lengths
White Standard Finish:
White Corner L9 - Equalizing
Corner Grid Mitered Dampers:
Widths 3-1/2" Widths
and smaller
3-1/2" use
Widthsand smaller
4" and increments
use
smaller from
use increments
1-1/2"
Widths to from
12".
available 1-1/2"
in 1/2" to 12".
1. Available Finishes04 Clear Anodized 2. Available Accessories 3. Available Options 4. Construction Details up to 72".
ailable
Optional Finishes
Finish 01 charge):
Optional
(extra White
Finish (extra 2. DA - Aluminum
Available
charge): DADamper
- Aluminum
Accessories Corner Damper
3. a single flap
Available style
a single
Options
Widths damper.
flapand
3-1/2" style damper.
smaller use4.
Lengths increments
Construction
available
Lengthsin single from 1-1/2"
Details
available
pieces in single to 12".
pieces
Standard Finish: L9 - Equalizing Dampers: Model DA damper. Core only.
04 Clear 02 Satin
Optional
Anodized
04 Silver
Finish
Clear (extra
Anodized charge): DAGrid Mitered Damper
- Aluminum Widths 4" andWidths
smaller 4"use
a single and
flapsmaller upWidths
use
style damper. to 72".available
up toin72".
Lengths
1/2" Longer sections are made b
available in single pieces
ard Finish:
01 White L9 - Equalizing
Corner Grid Mitered Dampers:
Widths
Model3-1/2" and
DA damper.
Model
Widths
FSM
smaller
4"Core
DA - Face use
use
anddamper.
only. Screw
smaller Core
Mount
Widths
increments
only. from available
upare
1-1/2" toin
to 72".
1/2" sections in the field w
12".
joining
02 Satin Silver 03
02 Black
04 Satin
ClearSilver
Anodized Longer sections Longer made
sectionsby are made by
1 Optional
White Finish (extra charge): DA - Aluminum
Corner Damper FSM a single
Widths flap
- Face3-1/2"
Screw style
and
FSMModel
-Mountdamper.
Facesmaller
DAScrew use
damper.Mount Lengths
Core increments
only. available infrom single 1-1/2"
pieces
factor tosupplied
12". alignment str
joining sections joining
in thesections
Longer field with
sections inarethemade
field with
by
0304Black 28
03 Custom
02 Black
Satin SilverColor Setup
DACharge
- Aluminum Damper Widths 4" and
a single smaller
flap
FSM - style
Face usedamper.
Screw Mount up to 72".
Lengths available in single pieces
al Finish (extra
Clear charge):
Anodized factor supplied factor
alignment
joining supplied
sectionsstrip.
alignment
Standard
in the fieldstrip.
mounting
with in conce
2802Custom Color03Setup
28 BlackCharge
Custom Color Setup Charge Model 4"
Widths DAanddamper.
smaller Coreuseonly. Longerup sections aresupplied
made byalignment strip.
4 Clear Satin Silver
Anodized Standard to Standard
72".
factor
mounting in concealedfriction
mounting in spring
concealed clips.
28 Custom Color Setup Charge FSM - Face Screw Mount joining sections in the field with
Model DA damper. Core only.friction spring friction
clips. spring clips.
factor Longer sections are made byreverse sizes (face
03 Black Standard mounting
Available in concealed
2 Satin Silver supplied alignment strip.
28 Custom Color Setup Charge FSM - Face Screw Mount Availablejoining
reversefriction
sections
Available
sizesspring
reverse
(face clips.
in bars
the field
sizes with to the short side
(face
parallel
3 Black Standard
bars parallelmounting
tobars in concealed
the parallel
short side).
to thesizes
short side).
frictionfactor
springsupplied alignment strip.
Available reverse (face
8 Custom Color Setup Charge clips.
bars parallel to the short side).
Standard
Available reversemounting
sizes (facein concealed
Revision: Revision:
Revision: Date: 11/2013 Date:
Date: 11/2013
11/2013 Dimensions
barsare
DimensionsDimensions
are in Inches friction
parallel to
in Page: theare
spring
Inches shortin ofInches
clips.
1side).
Page:
1 1 ofPage:
1 1o
Revision:Metal Industries, Inc.Date:
Metal
Metal 11/2013
Industries,
Clearwater,
Industries,FL Inc. 441
Inc. (727) Clearwater,
Clearwater,
- 2651 FLFax
FL (727) (727)
441(800) 441
- 2651 - 2651
865 8383
Fax (800) Fax8383
(800) 865
www.metalaire.com
865 Dimensions
8383 Available
are
www.metalaire.com
www.metalaire.com
sales@metalaire.com
reverse
in Inches sizes (face1 of 1
Page:
sales@metalaire.com
sales@metalaire.com
bars parallel to the short side).
Revision: Date: 11/2013
Metal Industries, Inc. Clearwater, FL (727) 441 - 2651 Dimensions
Fax (800) 865 8383 are in Inches
www.metalaire.com Page: 1 of 1
sales@metalaire.com
LDG140 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
MODEL 2000 NUMBER SPECIFICATION
MODEL 2000 (1 BORDER - 7/32 BARS - 1/2 CENTERS)
Model Mounting Length Width End Detail Available Finishes
2000 Standard 6 - 72 1 1/2 - 24 1EB One End Border 01 White
2015 H - Concealed Mtg W/ Hanger (One Piece) (1/2 Increments) 2EB Two End Borders 02 Satin Silver
2030 HP - Spline Subframe / Concealed Mtg OO Open Ends 03 Black
F - Floor Mtg 04 Clear Anodize
FP - Floor Mtg / Pencil Proof 24 Mill
28 Custom Color
Available Accessories
DA
L9 Equalizing Grid
LINEAR DIFFUSERS
AND GRILLES
Available Options
FSM
Access Door
(Access Door not availabe on floor units)
2015 HMC - Concealed Mtg W/ Hanger Miter Corner (1/2 Increments) SPEC Special Miter 02 Satin Silver
HPMC - Spline Subframe / Concealed Mtg Miter
2030 VI Vertical Inside 03 Black
Corner
FMC - Floor Mtg Miter Corner V2 Vertical Outside 04 Clear Anodize
FPMC - Floor Mtg / Pencil Proof Miter Corner 24 Mill
Available Accessories
DA
L9 Equalizing Grid
LINEAR DIFFUSERS
AND GRILLES
Available Options
Access Door
(Access Door not availabe on floor units)
28 Custom Color
LDG142 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
MODEL 2200 NUMBER SPECIFICATION
MODEL 2200 (3/16 BORDER - 7/32 BARS - 1/2 CENTERS)
Model Mounting Length Width Finish Accessories
2200 F - Floor Mtg 6 - 72 1 1/2 - 8 01 White L9 Equalizing Grid
2215 FP - Floor Mtg W/Miter (One Piece) (1/2 Increments) 02 Satin Silver
2230 03 Black
04 Clear Anodize
24 Mill
28 Custom Color
LINEAR DIFFUSERS
MODEL 2200 MITER CORNER
AND GRILLES
Model Mounting Width Miter Style Air Flow Available Finishes
2200 FMC - Floor Mtg Miter Corner 90 Horizontal 90 Degree 00 0 Degree Deflection 01 White
1 1/2 - 8
FPM - Floor Mtg/Pencil Proof Miter (1/2 Increments)
2215 SPEC Special Miter IN Air Flow In 02 Satin Silver
Corner
2230 OT Air Flow Out 03 Black
04 Clear Anodize
24 Mill
28 Custom Color
Available Accessories
DA
L9 Equalizing Grid
LINEAR DIFFUSERS
AND GRILLES
Available Options
FSM
Access Door
(Access Door not availabe on floor units)
2330CO 03 Black
04 Clear Anodize
24 Mill
28 Custom Color
Available Finishes
01 White
02 Satin Silver
03 Black
04 Clear Anodize
24 Mill
LDG144 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
MODEL 2400 NUMBER SPECIFICATION
MODEL 2400 (1/2 BORDER - 7/32 BARS - 1/2 CENTERS)
Model Mounting Length Width End Detail Available Finishes
2400 Standard 6 - 72 1 1/2 - 12 1EB One End Border 01 White
2415 H - Concealed Mtg W/ Hanger (One Piece) (1/2 Increments) 2EB Two End Borders 02 Satin Silver
2430 HP - Spline Subframe / Concealed Mtg OO Open Ends 03 Black
HW - Narrow Subframe / Concealed Mtg 04 Clear Anodize
HC - Combo Subframe / Concealed Mtg 24 Mill
28 Custom Color
Available Accessories
DA
L9 Equalizing Grid
LINEAR DIFFUSERS
AND GRILLES
Available Options
FSM
Access Door
(Access Door not availabe on floor units)
Available Finishes
01 White
02 Satin Silver
03 Black
04 Clear Anodize
24 Mill
2000
28 Custom Color
Available Accessories
DA
L9 Equalizing Grid
LINEAR DIFFUSERS
AND GRILLES
Available Options
FSM
Access Door
(Access Door not availabe on floor units)
2530 HPMC - Spline Subframe / Concealed Mtg Miter Corner VI Vertical Inside OT Air Flow Out
V2 Vertical Outside
Available Finishes
01 White
02 Satin Silver
03 Black
04 Clear Anodize
24 Mill
28 Custom Color
2000
LDG146 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 2000 PERFORMANCE DATA
MODEL 2000, 21000, 2200 (0 AND 15 DEFLECTION)
Outlet Velocity (Vk) 500 700 900 1000 1100 1200 1300
Total Pressure (Pt) .016 .031 .051 .062 .076 .090 .105
Static Pressure (Ps) .012 .024 .040 .050 .060 .072 .084
Listed Width
(in inches) NC - 15 20 23 26 29 31
Flow CFM 31 43 56 62 68 74 81
1 1/2
Throw Sill of Floor 6-9 9-13 10-14 11-16 13-18 13-19 14-20
.062
Ft Side Wall 8-11 11-16 13-18 14-20 15-22 17-24 17-25
Flow CFM 43 60 77 86 95 103 112
2
Throw Sill of Floor 5-8 8-12 10-14 11-16 13-18 13-19 14-20
.086
Ft Side Wall 7-10 10-15 13-18 14-20 15-22 17-24 17-25
Flow CFM 55 77 99 110 121 132 143
LINEAR DIFFUSERS
2 1/2
Throw Sill of Floor 6-9 9-13 11-16 13-18 13-19 15-21 15-22
AND GRILLES
.110
Ft Side Wall 8-11 11-16 14-20 16-23 17-24 18-26 20-28
Flow CFM 65 91 117 130 143 156 169
3
Throw Sill of Floor 7-10 10-15 13-18 15-21 15-22 17-24 18-26
.130
Ft Side Wall 8-12 13-18 15-22 17-25 18-26 20-28 21-30
Flow CFM 76 106 137 152 167 182 198
3 1/2
Throw Sill of Floor 7-10 10-15 13-18 15-21 15-22 17-24 18-26
.152
Ft Side Wall 9-13 13-18 16-23 18-26 20-26 21-30 21-30
Flow CFM 88 123 158 176 194 211 229
4
Throw Sill of Floor 8-11 12-16 14-20 16-23 18-26 19-27 20-29
.176
2 1/2
Throw Sill of Floor 6-9 9-13 11-16 13-18 13-19 15-21 15-22
AND GRILLES
.110
Ft Side Wall 8-11 11-16 14-60 16-23 17-24 18-26 20-28
Flow CFM 74 104 133 148 163 178 193
3
Throw Sill of Floor 7-10 10-14 13-18 15-21 15-22 17-24 18-26
.130
Ft Side Wall 8-12 13-18 15-22 17-25 18-26 20-28 21-30
Flow CFM 87 121 156 173 191 208 226
3 1/2
Throw Sill of Floor 7-10 10-15 13-18 14-20 15-21 15-22 17-24
.152
Ft Side Wall 8-12 13-19 16-23 18-26 20-28 21-30 22-32
Flow CFM 100 140 180 201 221 241 261
4
Throw Sill of Floor 8-11 13-18 15-21 17-24 18-26 19-27 21-30
.176
LINEAR BAR GRILLES
LDG148 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
PERFORMANCE NOTES FOR SERIES 2000
All data is tested in accordance with ANSI/ASHRAE 70-2006.
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
VK Outlet Velocity
Pt Total pressure (inches of water column)
Ps Static pressure = PtPv (inches of water column)
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
LINEAR DIFFUSERS
AND GRILLES
LINEAR BAR GRILLES
2000
2.5
Throw Sill of Floor 7-11 11-16 13-19 16-22 16-23 18-25 18-26
AND GRILLES
.110
Ft Side Wall 10-13 13-19 17-24 19-28 20-29 22-31 24-34
Flow CFM 65 91 117 130 143 156 169
3
Throw Sill of Floor 8-12 12-17 16-22 17-24 18-25 18-26 20-29
.130
Ft Side Wall 10-14 16-22 18-26 20-30 22-31 24-34 25-36
Flow CFM 76 107 137 153 168 183 198
3.5
Throw Sill of Floor 8-12 12-18 16-22 18-25 18-26 20-29 22-31
.152
Ft Side Wall 10-14 16-22 18-26 20-30 22-31 24-34 25-36
Flow CFM 88 123 158 176 193 210 228
4
Throw Sill of Floor 10-13 16-22 17-24 1-29 22-31 23-32 24-35
.176
LINEAR BAR GRILLES
LDG150 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES 2300 PERFORMANCE DATA
MODEL 2300, 2400 (30 DEFLECTION)
Outlet Velocity (Vk) 500 700 900 1000 1100 1200 1300
Total Pressure (Pt) .016 .031 .051 .062 .076 .090 .105
Static Pressure (Ps) .012 .024 .040 .050 .061 .072 .084
Listed Width
(in inches) NC 0 20 23 26 29 31 36
Flow CFM 36 50 65 71 79 86 94
1.5
Throw Sill of Floor 7-11 11-16 12-17 13-19 16-22 16-23 17-24
.062
Ft Side Wall 10-13 13-19 16-22 17-24 18-26 20-29 20-30
Flow CFM 48 68 88 97 108 117 127
2
Throw Sill of Floor 6-10 10-14 12-17 13-19 16-22 16-23 17-24
.086
Ft Side Wall 8-12 12-18 16-22 17-24 18-26 20-29 20-30
Flow CFM 63 88 114 125 139 152 164
LINEAR DIFFUSERS
2.5
Throw Sill of Floor 7-11 11-16 13-19 16-22 16-23 18-25 18-26
AND GRILLES
.110
Ft Side Wall 10-13 13-19 17-24 19-28 20-29 22-31 24-34
Flow CFM 74 105 135 148 164 179 194
3
Throw Sill of Floor 8-12 12-17 16-22 17-24 18-25 18-26 20-29
.130
Ft Side Wall 10-14 16-22 18-26 20-30 22-31 24-34 25-36
Flow CFM 87 123 156 174 193 211 228
3.5
Throw Sill of Floor 8-12 12-18 16-22 18-25 18-26 20-29 22-31
.152
Ft Side Wall 10-14 16-23 19-28 22-31 24-34 25-36 26-38
Flow CFM 100 141 181 200 221 242 262
4
Throw Sill of Floor 10-13 16-22 17-24 19-28 22-31 23-32 24-35
.176
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
VK Outlet Velocity
Pt Total pressure (inches of water column)
Ps Static pressure = PtPv (inches of water column)
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
LINEAR DIFFUSERS
AND GRILLES
LINEAR BAR GRILLES
2000
LDG152 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
MODEL UP-2000
The models UP-2000 (un-insulated) and UPI-2000 (insulated)
are designed to connect the 2000 series to the ducted supply
or return system. The UP-v2000 is constructed of galvanized
steel. The height of the plenum is 10".
Tag: Engineer:
Standard insulation on UPI2000 is 1/2" Fiberglass
Project: Contractor:
Optional external insulation and internal closed cell foam insulation are also available
Location: Architect:
Standard
Date: inlet sizes are 6" (round) or 8",By:
Submitted 10", 12" and 14" (oval)
Standard lengths
Architectural available
Linear are 24", 36", 48", 60" and 72"
Diffusers
Submittal: UP/UPI 2000
LBG - Linear Bar Grilles Plenum
Models: UP/UPI Universal Plenum
LINEAR DIFFUSERS
W 1
AND GRILLES
2 1/8 2
1
2
A
10.5
2000H,
Oval2100H,
Width2300H,
(B) 2400H 2000H, 2100H, 2300H, 2400H
3
3
Linear Bar DIM W (O,D. Linear Bar 4
DIM W (O.D.
Grilles Width Width) Grilles Width Width)
1.5 1.875 13 13.375
Engineer: Optional
Plenum Length
2 = Listed 2.375
Size 13.5 13.875
Contractor: Internal
Insulation
Linear Diffusers
Submittal: UP/UPI 2000 3 3.375 14.5 14.875
Inlet Chart
ar Grilles Plenum Size Type 3.5A 3.875
B 15 15.375
Universal Plenum 3/8 1/4 6 Round 5
4 7/8 4.375 15.5 15.875
8 Oval 5 7/8 8 15/16
10 Oval
4.5
5 7/8
4.875
12 1/16
16 16.375
W 1
2 1/8 12 Oval 5 7/8 155.375
1/4 16.5 16.875
2
14 Oval 5 7/8 18 7/16
1 5.5 5.875 17 17.375
2
6 6.375 17.5 17.875
2000H,2100H, 2000H, 2100H,
2300H, 2400H6.5 6.875 2300H,182400H 18.375
A LINEAR BAR DIM W LINEAR BAR DIM W
Oval Width (B) GRILLES33WIDTH (O.D.7 WIDTH) 7.375 18.5 18.875
GRILLES WIDTH (O.D. WIDTH)
1.54 1.875
7.5 7.875 13 19 13.375
19.375
2 2.375 13.5 13.875
2.5 8
2.875 8.375 14 19.5 19.875
14.375
UP2000/UPI2000
INSTALLATION INFORMATION
The hanger bracket mounting system is also designed
to work well with factory supplied subframe material
both P and W styles. In order to ensure a
satisfactory subframe installation, the following
procedures should be followed:
The factory supplied subframe material should be cut to
the proper length (i.e., the nominal size of the Grille).
The neck of the subframe should be attached to the
outside of the ductwork with the ends of the duct nestled
in the channel of the subframe extrusion.
Care should be taken that the face of the subframe
material is parallel to the finished surface, and, if being HANGER BRACKET INSTALLATION
used as a plaster ground, the P" subframe is recessed INTO HEMMED DUCTS
LINEAR DIFFUSERS
the proper distance from the designed finish wall. Auxiliary Subframe Preparation "P" and "W" Styles
AND GRILLES
LDG154 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
Installation Information
INSTALLATION INFORMATION
Hanger Bracket Installation
HANGER BRACKET into Auxiliary Subframe
INSTALLATION In order to ensure a satisfactory installation, the
Installation Information following procedures should be followed:
INTO AUXILIARY SUBFRAME
Hanger Bracket Installation into Auxiliary Subframe Arrange the appropriate number of hanger brackets and
hanger screw mounts (shipped unattached) on the neck
of the Grille, positioning the brackets over the hanger
screw mounts.
Insert the supplied #8 X 3" screws through their mounts
and into the proper hole in the hanger brackets, locking
the Grille and hangers together.
Position the Grille carefully in the duct opening and press
into position, pushing the legs of the hanger brackets
past the extruded channel of the auxiliary subframe,
B1 allowing them to snap into position (if necessary, press
LINEAR DIFFUSERS
the hanger brackets upward with the screws to seat the
AND GRILLES
B1 brackets properly).
Tighten the screws to draw the Grille firmly against the
Series 2000 and 2300 Linear Bar Grilles and Registers
ceiling or sidewall, adjusting the tension to accommodate
are easily installed into auxiliary subframe material
any variation in the mounting surface. In installations
using factory supplied hanger brackets and leveling
where long runs are composed of many separate units,
screws according to the following instructions:
Hanger Bracket Installation into Auxiliary Subframe the same procedure should be followed on each Grille
section, taking care to use the factory supplied alignment
Hanger Bracket Installation into Auxiliary Subframe splines to ensure a smooth and unbroken appearance.
LDG156 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
PLENUM SLOT DIFFUSERS
The METALAIRE line of high performance Plenum Slot Diffusers and Light Troffer Diffusers
is designed to provide a tight air discharge pattern in variable flow conditions, making the
METALAIRE Plenum Slot Diffusers an excellent choice for VAV systems.
Plenums are fabricated to ensure straightness, rigidity and maximum performance. The plenum
heights are engineered to minimize pressure drop and sound levels while maximizing room air
induction and comfort.
Model PHPS-IT Is a high performance slot diffuser with uniquely designed ice
tong pattern controllers providing a greater range of air pattern adjustability. PAGE 22
PLENUM DIFFUSERS WITH
ADJUSTABLE PATTERN
CONTROLLERS
PHPS
PSD2 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
MODEL PHPS/PHNS
The PHPS is a high performance, competitively
priced plenum slot diffuser. The diffusers are
constructed of corrosion-resistant steel. They are
designed to provide high performance from minimum
to maximum flows making them an excellent
selection for VAV systems.
Heavy duty extruded aluminum pattern controller and gasket for
tight horizontal discharge pattern
Field adjustable pattern controllers allow full horizontal to full vertical discharge
Units available in 1 to 4 slots to meet a wide range of applications and capabilities
Double hemmed face construction for rigidity and straightness with extruded aluminum center tees
PHPR return model offers low pressure drop return. Integral light shield hides interior of unit
PLENUM SLOT
DIFFUSERS
Models 1 Slot 2 Slots 3 Slots 4 Slots
PHPS(I)-75-6 PHPR(I)-75-6 24, 36, 48, 60 3/4 1 3/4 2 3 1/2 3 3/4 5 1/4 5 1/2 7 7 1/4
PHPS(I)-10-6 PHPR(I)-10-6 24, 36, 48, 60 1 2 2 1/4 4 4 1/4 6 6 1/4 8 8 1/4
PHPS(I)-15-6 PHPR(I)-15-6 24, 36, 48, 60 1 1/2 2 1/2 2 3/4 5 5 1/4 7 1/2 7 3/4 10 10 1/4
Inlet Size C D
6 Round 5 7/8 6
8 Oval 8 15/16 6
10 Oval 12 1/16 6
12 Oval 15 1/4 6
PHPS
PSD4 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
Models 1 Slot with Center Tee 2 Slots with Center Tee 2 Slots with Hat Section
Supply Return Nominal Length W A B A B A B
PHPS(I)-75-9 PHPR(I)-75-9 24, 48 3/4 1 3/4 2 3/8 3 1/2 4 1/8
PHPS(I)-10-9 PHPR(I)-10-9 24, 48 1 2 2 5/8 4 4 5/8
PHPS(I)-15-9 PHPR(I)-15-9 24, 48 1 1/2 2 1/2 3 1/8 5 5 5/8
PHNS(I)-75-9 PHNR(I)-75-9 24, 48 3 7/8 4 1/4
PHNS(I)-10-9 PHNR(I)-10-9 24, 48 4 3/8 5
PHNS(I)-15-9 PHNR(I)-15-9 24, 48 5 3/8 6
PLENUM SLOT
DIFFUSERS
Inlet Size C D
6" Round 5 7/8
8" Oval 8 15/16 6
10" Oval 12 1/16 6
12" Oval 15 1/4 6
2
1 1 1 5
2 1 2 2 1 8 1
2 1
2 2
W W 1 38
A W
W
A W
B
B A
B
Number PHP-9
For Dimensions A, B, L & W See Table on Page 1
Front View
End Clip (4 Places)
2 21
Submittal
5
2 21
Mounting Angle
( 4 Places)
Plenum = Ceiling Module - 58
Overall = T-Bar Module - 41
L = T-Bar Module
PLENUM SLOT
2003 Metal Industries, Inc. Clearwater, FL All Rights reserved. Printed in U.S.A. (727) 441 - 2651 Fax (727) 443 - 7167 www.metalaire.com sales@metalaire.com
CONTROLLERS
PHPS
PSD6 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES PHP SPECIFICATIONS
SUPPLY T-BAR LAY-IN SUPPLY DONN FINELINE CEILINGS
INSULATED/NON-INSULATED CENTER TEE-INSULATED/NON-INSULATED
Plenum slot supply diffusers shall be METALAIRE PHPS-6 Plenum slot supply diffusers shall be METALAIRE PHPS-9
(non-insulated) or PHPSI-6 (insulated). Plenum slot (non-insulated) or PHPSI-9 (insulated). Plenum slot
diffusers shall be of the sizes and mounting types as diffusers shall be of the sizes and mounting types as
shown on the device schedule. shown on the device schedule.
Diffusers shall have aluminum extruded deflector blades
Units shall be designed to integrate into 9/16" wide bolt
with a gasket tip to seal against the plenum side wall slot or narrow tee systems and include a factory-mounted
or slot divider. Units shall be adjustable from the slot 1" wide white center tee on two-slot units. Diffusers shall
opening to provide horizontal to vertical air patterns. have aluminum extruded deflector blades with a gasket
Inlets shall be round or oval, centrally located, with a tip to seal against the plenum side wall or slot divider.
minimum depth of 2 1/8" for ease of duct connection. Units shall be adjustable from the slot opening to provide
Units with inlet depths less than 1 3/4" are not horizontal to vertical air patterns.
acceptable. For straightness and rigidity, plenums shall
Inlets shall be round or oval, centrally located, with a
be fabricated using a single-piece panel construction and minimum depth of 2 1/8" for ease of duct connection.
have a double metal thickness hem at the face. Plenum Units with inlet depths less than 1 3/4" are not
diffusers shall be constructed of corrosion resistant acceptable. For straightness and rigidity, plenums shall
galvanized steel. Height of unit shall be 10" or greater to be fabricated using a single-piece panel construction and
maximize diffuser performance. have a double metal thickness hem at the face. Plenum
Units with heights less than 10" are not acceptable. diffusers shall be constructed of corrosion resistant
Units shall be available with 1/2", 3/4", 1", or 1 1/2" slot galvanized steel. Height of unit shall be 10" or greater.
widths and be available with 1, 2, 3, or 4 independent Units with heights less than 10" are not acceptable.
supply slots. Diffuser face and air pattern controller shall
Units shall be available with 3/4", 1", or 1 1/2" slot
be black. Optional tees shall be white. widths and be available with 1 or 2 independent
PLENUM SLOT
supply slots. Diffuser face and air pattern controller
DIFFUSERS
Insulated diffusers shall be Model PHPSI. Insulation shall
shall be white.
be internal.
Insulated diffusers shall be Model PHPSI. Insulation shall
RETURN T-BAR LAY-IN
be internal.
INSULATED/NON-INSULATED
RETURN DONN FINELINE CEILINGS
Plenum slot return diffusers shall be METALAIRE PHPR-6 CENTER TEE-INSULATED/NON-INSULATED
(non-insulated) or PHPRI-6 (insulated). Return diffusers
shall be of the sizes and mounting types as shown on the Plenum slot return diffusers shall be METALAIRE PHPR-9
supply slots. Diffuser face and air pattern controller ASHRAE Standard 70-2006.
DIFFUSERS
shall be white.
Insulated diffusers shall be Model PHPSI. Insulation shall Paint Specification
be internal. Process shall be anodic electro-deposition using an
anodic acrylic paint. Units shall undergo pre-treatment
including a pressurized spray stage using an alkaline
cleaner and de-ionized water rinse.
PLENUM DIFFUSERS WITH
ADJUSTABLE PATTERN
CONTROLLERS
PHPS
PSD8 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
PHP MODEL NUMBER SPECIFICATION
PLENUM SLOT DIFFUSER
Non-insulated # of Slots Slot Lengths Inlets Available Finishes
PHPS-50-6 1/2" Slot Width 1 24" No Inlet Standard Finish
PHPS-75-6 3/4" Slot Width 2 36" 6" Round 25 White Tee / Black Border
PHPS-10-6 1" Slot Width 3 48" 8" Oval Optional Finishes
PHPS-15-6 1 1/2" Slot Width 4 60" 10" Oval 26 All White
12" Oval 27 All Black
14" Oval
Available Options
CN Cross Notch (Standard on Units over 24")
T-1 One Outside Tee
T-2 Two Outside Tees
PLENUM SLOT
TC-1 One Outside T-bar Clip
DIFFUSERS
TC-2 Bar Clips Both Ends
TC-3 One T-bar Clip / One Outside Tee
EN End Notch
EN-2 End Notch / Two Tees
NB No Blades
PSD10 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
PHP MODEL NUMBER SPECIFICATION
PLENUM SLOT DIFFUSER
Available Options
CN Cross Notch (Standard on Units over 24")
T-1 One Outside Tee
T-2 Two Outside Tees
TC-1 One Outside T-bar Clip
TC-2 Bar Clips Both Ends
TC-3 One T-bar Clip / One Outside Tee
PLENUM SLOT
EN End Notch
DIFFUSERS
EN-2 End Notch / Two Tees
PSD12 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES PHP PERFORMANCE DATA
MODEL PHPS/PHPSI ONE SLOT
CFM/LF 10 15 25 40 60 75 90 120
CFM 20 30 50 80 120 150 180 240
Ps .010 .023 .064 .163 .367 .574 .826 1.469
Horizontal Pt .011 .024 .068 .174 .390 .610 .879 1.562
Throw 2-3-6 3-5-6 5-7-10 7-9-12 9-11-15 10-12-17 11-13-19 12-15-22
2' Length
NC <10 <10 17 29 39 43 47 56
6" Inlet
Ps .013 .029 .082 .209 .471 .736 1.060 1.885
Pt .014 .031 .086 .220 .495 .773 1.113 1.978
Vertical
Throw 1-1-3 1-2-4 2-3-7 4-5-11 5-8-16 7-10-20 8-12-24 11-16-32
NC <10 <10 15 29 38 42 45 52
CFM 40 60 100 160 240 300 360 -
Ps .010 .023 .063 .160 .360 .563 .810 -
Horizontal Pt .013 .028 .079 .201 .453 .708 1.020 -
1/2" Slot Width
PLENUM SLOT
NC <10 12 26 39 46 50 55 -
DIFFUSERS
CFM 20 30 50 80 120 150 180 240
Ps .007 .015 .041 .104 .235 .367 .528 .939
Horizontal Pt .007 .015 .042 .108 .243 .380 .973 -
Throw 2-3-5 3-4-7 4-6-8 7-8-12 8-10-14 9-11-16 10-12-17 12-14-20
2' Length
NC <10 <10 <10 23 32 37 40 47
8" Inlet
Ps .008 .017 .048 .123 .277 .433 .623 1.108
Pt .008 .018 .050 .127 .285 .446 .642 1.141
Vertical
Throw 1-1-2 1-2-3 2-3-5 3-4-9 4-7-13 5-8-16 7-10-20 9-13-26
NC <10 <10 <10 24 36 41 45 54
CFM 40 60 100 160 240 300 360 -
Ps .006 .014 .040 .102 .230 .360 .518 -
8" Inlet
Ps .008 .017 .047 .121 .272 .424 .611 -
Pt .008 .019 .053 .136 .305 .477 .686 -
Vertical
Throw 1-2-4 2-3-6 3-5-10 6-8-17 8-12-25 10-15-31 12-19-37 -
NC <10 12 27 39 44 48 - -
CFM 50 75 125 200 300 375 450 -
Ps .006 .014 .039 .100 .226 .353 .508 -
Horizontal Pt .08 .017 .048 .124 .278 .434 .626 -
Throw 2-4-7 4-6-11 6-9-14 10-13-18 13-16-22 14-18-25 16-19-27
5' Length
NC <10 <10 17 28 37 42 45 -
8" Inlet
Ps .007 .017 .046 .118 .266 .416 .599 -
Pt .009 .020 .055 .142 .319 .498 .717 -
Vertical
Throw 2-3-5 3-4-8 4-7-13 7-11-22 11-16-32 13-20-40 16-24-48 -
NC <10 <10 14 29 41 46 50 -
PHPS
NC <10 <10 11 27 40 45 48 52 -
DIFFUSERS
Horizontal
1 1/2" Slot Width
Throw 2-2-5 2-3-7 4-6-12 6-9-15 9-13-18 12-15-21 13-16-23 15-18-26 17-21-30
4' Length
NC <10 <10 <10 16 25 32 37 45 53
CONTROLLERS
8" Inlet
Ps .003 .007 .020 .051 .115 .179 .258 .458 .815
Pt .004 .009 .026 .066 .148 .231 .333 .593 1.054
Vertical
Throw 1-1-2 1-2-4 2-3-6 3-5-10 5-7-14 6-9-18 7-11-21 10-14-29 13-19-38
NC <10 <10 <10 12 22 28 33 40 48
CFM 50 75 125 200 300 375 450 600 800
Ps .004 .009 .026 .066 .149 .233 .335 .596 1.059
Horizontal Pt .005 .011 .031 .078 .176 .275 .395 .703 1.249
Throw 3-4-8 4-6-10 7-9-13 10-12-17 12-15-21 13-16-23 15-18-25 17-21-29 19-24-34
5' Length
NC <10 <10 <10 18 27 34 39 47 55
10" Inlet
Ps .003 .007 .020 .050 .112 .176 .253 .449 .799
Pt .004 .009 .024 .062 .139 .217 .313 .556 .989
Vertical
Throw 1-2-3 2-2-5 3-4-8 4-7-13 7-10-20 8-12-25 10-15-30 13-20-40 18-27-53
NC <10 <10 <10 14 24 30 35 42 50
PHPS
PSD14 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES PHP PERFORMANCE DATA
MODEL PHPS/PHPSI TWO SLOT
CFM/LF 10 15 25 40 60 75 90 120 160
CFM 20 30 50 80 120 150 180 240 320
Ps .005 .012 .032 .083 .186 .291 .419 .745 1.324
Horizontal Pt .005 .012 .034 .086 .195 .304 .438 .778 1.383
Throw 1-2-3 2-2-5 3-4-8 4-6-12 6-9-17 8-12-19 9-14-21 13-17-24 16-20-28
2' Length
NC <10. <10. <10. 15 26 32 37 43 51
8" Inlet
Ps .005 .011 .029 .075 .169 .264 .380 .675 1.200
Pt .005 .011 .031 .079 .177 .277 .398 .708 1.259
Vertical
Throw 0-0-2 0-1-3 1-2-6 3-5-9 5-7-14 6-9-17 7-10-21 9-14-28 12-19-37
NC <10. <10. <10. 14 26 33 37 44 51
CFM 40 60 10 160 240 300 360 480 640
Ps .005 .011 .032 .081 .183 .285 .411 .730 1.298
Horizontal Pt .006 .014 .038 .096 .216 .338 .486 .864 1.536
1/2" Slot Width
Throw 1-2-4 2-3-7 4-5-11 6-9-18 9-13-24 11-16-27 13-20-30 18-24-34 23-28-39
4' Length
NC <10. <10. <10. 18 29 35 40 46 54
8" Inlet
Ps .005 .010 .029 .074 .165 .258 .372 .662 1.176
Pt .006 .012 .035 .088 .199 .311 .446 .796 1.415
Vertical
Throw 0-1-2 1-1-5 2-3-8 4-7-13 7-10-20 8-12-24 10-15-29 13-20-39 17-26-52
NC <10. <10. <10. 17 29 36 40 47 54
CFM 50 75 125 200 300 375 450 600 800
Ps .005 .011 .031 .079 .179 .279 .402 .715 1.272
Horizontal Pt .006 .013 .036 .091 .206 .321 .463 .822 1.462
Throw 2-3-6 3-4-8 4-6-13 7-10-21 10-16-27 13-19-30 16-23-33 21-27-38 25-31-44
5' Length
NC <10. <10. <10. 20 31 37 42 48 56
10" Inlet
Ps .005 .010 .028 .072 .162 .253 .365 .648 1.153
Pt .005 .012 .033 .084 .189 .295 .425 .755 1.343
Vertical
Throw 0-1-3 1-2-6 2-5-10 5-8-16 8-12-24 10-15-31 12-18-37 16-24-49 22-33-65
PLENUM SLOT
NC <10. <10. <10. 19 31 38 42 49 56
DIFFUSERS
CFM 20 30 50 80 120 150 180 240 320
Ps .004 .008 .023 .059 .133 .208 .299 .532 .946
Horizontal Pt .004 .009 .025 .063 .141 .221 .318 .565 1.005
Throw 1-2-3 2-2-5 3-4-8 4-6-12 6-9-17 8-11-19 9-14-21 12-17-24 16-20-28
2' Length
NC <10. <10. <10. <10. 20 26 31 38 44
8" Inlet
Ps .003 .008 .021 .054 .122 .191 .275 .490 .871
Pt .004 .008 .023 .058 .131 .204 .294 .523 .930
Vertical
Throw 0-0-2 0-1-3 1-2-6 3-5-9 5-7-14 6-9-17 7-10-21 9-14-27 12-18-37
NC <10. <10. <10. <10. 17 26 31 37 42
CFM 40 60 100 160 240 300 360 480 640
Ps .004 .008 .023 .058 .130 .204 .293 .521 .927
Throw 2-3-5 3-4-8 4-7-13 7-11-20 11-16-24 13-19-27 16-21-30 20-24-34 23-28-39
4' Length
NC <10. <10. <10. 14 23 29 34 41 47
CONTROLLERS
8" Inlet
Ps .003 .008 .021 .053 .120 .188 .270 .480 .854
Pt .004 .010 .027 .068 .154 .240 .346 .614 1.092
Vertical
Throw 0-1-2 1-1-5 1-3-8 4-6-13 6-10-19 8-12-24 10-14-29 13-19-38 17-25-51
NC <10. <10. <10. <10. 20 29 34 40 45
CFM 50 75 125 200 300 375 450 600 800
Ps .003 .008 .022 .056 .125 .196 .282 .501 .890
Horizontal Pt .004 .009 .026 .067 .152 .237 .342 .607 1.080
Throw 2-3-5 3-4-8 4-6-13 7-10-21 10-15-27 13-19-30 15-21-33 21-27-38 25-31-44
5' Length
NC <10. <10. <10. 16 25 31 36 43 49
10" Inlet
Ps .003 .007 .020 .051 .115 .180 .259 .461 .819
Pt .004 .009 .025 .063 .142 .222 .319 .568 1.009
Vertical
Throw 0-1-3 1-2-6 2-5-10 5-8-15 8-12-23 10-15-29 12-17-35 15-23-46 21-31-62
NC <10. <10. <10. <10. 22 31 36 42 47
PHPS
Throw 1-2-4 2-3-6 4-5-11 6-9-17 9-13-24 11-16-27 13-19-30 17-24-34 23-28-39
4' Length
NC <10 <10 <10 <10 20 27 32 38 43
8" Inlet
Ps .002 .005 .013 .033 .075 .117 .169 .300 .534
Pt .003 .007 .019 .048 .109 .170 .244 .435 .772
Vertical
Throw 0-0-1 0-1-2 1-2-5 2-4-9 4-7-13 5-8-16 7-10-20 9-13-26 12-18-35
NC <10 <10 <10 <10 19 27 33 40 45
CFM 50 75 125 200 300 375 450 600 800
Ps .002 .005 .013 .034 .076 .118 .170 .030 .538
Horizontal Pt .003 .006 .018 .046 .102 .160 .230 .410 .728
Throw 2-2-5 2-4-7 4-6-12 7-10-20 10-15-27 12-18-30 15-22-33 20-27-38 25-31-44
5' Length
NC <10 <10 <10 11 22 29 34 40 45
10" Inlet
Ps .002 .005 .013 .032 .073 .114 .164 .291 .518
Pt .003 .006 .017 .044 .100 .156 .224 .398 .708
Vertical
Throw 0-0-1 0-1-3 1-2-7 3-5-11 5-8-16 7-10-20 8-12-24 11-16-32 14-21-43
PLENUM SLOT
Horizontal
1 1/2" Slot Width
Throw 2-2-5 2-3-7 4-6-12 6-9-19 9-14-24 12-17-27 14-21-30 19-24-34 23-28-39
4' Length
NC <10 <10 <10 <10 15 20 24 32 40
CONTROLLERS
10" Inlet
Ps .001 .002 .005 .014 .032 .049 .071 .127 .225
Pt .001 .003 .008 .022 .049 .076 .110 .195 .347
Vertical
Throw 0-0-0 0-0-1 0-1-2 1-1-6 1-3-9 2-5-11 3-7-14 6-9-18 8-12-20
NC <10 <10 <10 <10 <10 13 18 26 33
CFM 50 75 125 200 300 375 450 600 800
Ps .001 .002 .006 .016 .037 .058 .083 .148 .263
Horizontal Pt .001 .003 .009 .024 .053 .083 .120 .213 .378
Throw 2-2-5 2-4-7 4-6-12 6-9-10 9-14-27 12-18-30 14-21-33 19-27-38 25-31-44
5' Length
NC <10 <10 <10 11 17 22 26 34 42
12" Inlet
Ps .001 .002 .005 .014 .030 .047 .068 .122 .216
Pt .001 .003 .008 .021 .047 .073 .105 .186 .331
Vertical
Throw 0-0-1 0-0-1 0-1-4 1-2-8 2-6-12 4-7-15 6-9-18 8-12-23 10-16-31
NC <10 <10 <10 <10 11 15 20 28 35
PHPS
PSD16 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES PHP PERFORMANCE DATA
MODEL PHPS/PHPSI THREE SLOT
CFM/LF 10 15 25 40 60 75 90 120 250
CFM 50 80 120 160 200 240 320 400 500
Ps .012 .030 .068 .121 .188 .271 .483 .754 1.178
Horizontal Pt .013 .034 .076 .136 .212 .305 .542 .847 1.324
Throw 4-6-12 6-9-15 9-13-19 12-15-21 14-17-24 15-19-26 18-21-30 20-24-34 22-27-38
2' Length
NC <10 <10 16 23 29 34 41 48 55
8" Inlet
Ps .009 .023 .052 .092 .144 .207 .368 .576 .900
Pt .010 .027 .060 .107 .167 .241 .428 .669 1.045
Vertical
Throw 0-1-3 1-2-7 2-4-11 3-7-15 5-9-18 7-11-21 10-15-25 12-18-27 15-22-31
NC <10 <10 11 20 26 31 36 40 46
CFM 100 160 240 320 400 480 640 800 1000
Ps .012 .030 .067 .118 .185 .266 .473 .739 1.155
Horizontal Pt .017 .044 .100 .178 .278 .400 .712 1.112 1.737
1/2" Slot Width
Throw 4-6-12 6-9-19 9-14-26 13-19--30 16-24-34 19-26-37 25-30-43 28-34-48 31-38-54
4' Length
NC <10 11 19 26 32 37 44 51 58
8" Inlet
Ps .009 .023 .051 .090 .141 .203 .361 .564 .882
Pt .015 .037 .084 .150 .234 .337 .600 .937 1.464
Vertical
Throw 0-1-4 1-3-10 3-6-15 4-10-21 7-13-26 10-15-30 14-21-35 17-26-39 21-31-43
NC <10 <10 14 23 29 34 39 43 49
CFM 125 200 300 400 500 600 800 1000 1250
Ps .011 .029 .065 .116 .181 .261 .464 .724 1.132
Horizontal Pt .016 .041 .092 .163 .255 .368 .654 1.021 1.596
Throw 4-6-13 7-10-20 10-15-29 13-20-34 17-25-38 20-29-42 27-34-48 31-38-54 35-42-60
5' Length
NC <10 13 21 28 34 39 46 53 60
10" Inlet
Ps .009 .022 .050 .089 .138 .199 .354 .553 .864
Pt .013 .034 .077 .136 .213 .306 .544 .850 1.328
Vertical
Throw 1-1-5 1-3-12 3-7-18 6-12-24 9-15-30 12-18-34 16-24-39 21-31-43 25-34-49
PLENUM SLOT
NC <10 <10 16 25 31 36 41 45 51
DIFFUSERS
CFM 50 80 120 160 200 240 320 400 500
Ps .008 .022 .049 .087 .135 .195 .346 .541 .845
Horizontal Pt .010 .025 .057 .101 .159 .228 .406 .634 .991
Throw 3-5-9 5-8-15 8-11-19 10-15-21 13-17-24 15-19-26 18-21-30 20-24-34 22-27-38
2' Length
NC <10 <10 <10 18 23 27 34 40 45
8" Inlet
Ps .006 .016 .037 .066 .103 .148 .263 .411 .643
Pt .008 .020 .045 .081 .126 .182 .323 .504 .788
Vertical
Throw 0-0-2 1-1-5 1-3-9 2-5-13 3-7-16 5-9-19 8-13-25 10-16-27 13-20-31
NC <10 <10 <10 18 26 33 41 47 53
CFM 100 160 240 320 400 480 640 800 1000
Ps .008 .021 .048 .085 .133 .191 .339 .530 .829
Throw 5-7-15 8-12-21 12-18-26 16-21-30 10-24-34 21-26-37 25-30-43 28-34-48 31-38-54
4' Length
NC <10 <10 15 21 26 30 37 43 48
CONTROLLERS
10" Inlet
Ps .006 .016 .036 .065 .101 .145 .258 .403 .630
Pt .009 .024 .053 .095 .148 .214 .380 .593 .927
Vertical
Throw 1-2-7 2-5-13 5-10-19 8-13-25 11-16-27 13-19-30 17-25-35 21-27-39 25-31-43
NC <10 <10 11 21 29 36 44 50 56
CFM 125 200 300 400 500 600 800 1000 1250
Ps .008 .021 .047 .083 .130 .187 .333 .520 .812
Horizontal Pt .013 .033 .074 .131 .204 .294 .523 .817 1.276
Throw 6-8-17 9-13-24 13-20-29 18-24-34 22-27-38 24-29-42 28-34-48 31-38-54 35-42-60
5' Length
NC <10 10 17 23 28 32 39 45 50
10" Inlet
Ps .006 .016 .036 .063 .099 .142 .253 .395 .617
Pt .011 .028 .062 .111 .173 .249 .443 .692 1.081
Vertical
Throw 1-3-10 3-7-16 7-12-23 10-16-27 13-19-31 16-23-34 21-27-39 25-31-43 28-34-49
NC <10 <10 13 23 31 38 46 52 58
PHPS
Throw 3-5-10 5-8-16 8-12-24 11-16-30 13-20-34 16-24-37 21-30-43 27-34-48 31-38-54
4' Length
NC <10 <10 11 20 28 34 42 49 57
10" Inlet
Ps .004 .010 .022 .039 .060 .087 .155 .242 .378
Pt .007 .017 .039 .069 .108 .156 .276 .432 .675
Vertical
Throw 0-1-3 1-2-7 2-4-11 3-7-14 5-9-18 7-11-21 9-14-28 12-18-36 15-22-43
NC <10 <10 <10 17 24 30 38 44 48
CFM 125 200 300 400 500 600 800 1000 1250
Ps .005 .012 .028 .050 .078 .112 .200 .312 .487
Horizontal Pt .008 .020 .044 .079 .123 .177 .315 .492 .768
Throw 4-6-11 6-9-18 9-13-26 12-18-34 15-22-38 18-26-42 24-34-48 29-38-54 35-42-60
5' Length
NC <10 <10 13 22 30 36 44 51 59
12" Inlet
Ps .004 .009 .021 .038 .059 .085 .152 .237 .370
Pt .007 .017 .038 .067 .104 .150 .267 .417 .651
Vertical
Throw 1-1-5 1-3-9 3-7-14 6-9-19 8-12-24 9-14-28 13-19-38 16-24-43 20-29-49
PLENUM SLOT
NC <10 <10 12 19 26 32 40 46 50
DIFFUSERS
Horizontal
1 1/2" Slot Width
Throw 2-3-7 4-5-11 5-8-16 7-11-22 9-14-27 11-16-32 14-22-43 18-27-48 23-34-50
4' Length
NC <10 <10 <10 14 18 22 30 36 43
CONTROLLERS
12" Inlet
Ps .002 .005 .011 .019 .030 .044 .077 .121 .189
Pt .004 .009 .021 .038 .059 .085 .151 .236 .369
Vertical
Throw 0-0-2 1-1-4 1-3-6 2-4-9 3-5-11 4-6-13 6-9-17 7-11-22 9-14-27
NC <10 <10 <10 <10 <10 13 19 23 27
CFM 125 200 300 400 500 600 800 1000 1250
Ps .002 .006 .014 .025 .039 .056 .100 .156 .244
Horizontal Pt .005 .013 .030 .054 .084 .121 .215 .336 .524
Throw 3-4-9 5-7-14 7-11-22 10-14-29 12-18-36 14-22-42 19-29-48 24-36-54 30-42-60
5' Length
NC <10 <10 12 16 20 24 32 38 45
12" Inlet
Ps .002 .005 .0111 .019 .030 .043 .076 .119 .185
Pt .005 .012 .027 .048 .075 .107 .191 .298 .466
Vertical
Throw 0-1-3 1-2-6 2-4-9 4-6-11 5-7-14 6-9-17 8-11-23 9-14-28 12-18-35
NC <10 <10 <10 <10 11 15 21 25 29
PHPS
PSD18 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES PHP PERFORMANCE DATA
MODEL PHPS/PHPSI FOUR SLOT
CFM/LF 10 15 25 40 60 75 90 120 300
CFM 100 150 160 200 300 350 400 500 -
Ps .033 .074 .084 .131 .295 .401 .524 .819 -
Horizontal Pt .039 .087 .099 .154 .347 .473 .617 .965 -
Throw 9-12-16 12-14-20 12-15-21 13-16-23 16-20-28 18-22-30 19-23-33 21-26-36 -
2' Length
NC <10 15 17 23 35 39 42 48 -
8" Inlet
Ps .029 .066 .075 .117 .262 .357 .466 .729 -
Pt .035 .079 .090 .140 .315 .428 .559 .874 -
Vertical
Throw 1-2-8 2-5-12 2-5-12 4-8-16 8-12-20 9-14-21 10-16-23 13-18-25 -
NC <10 12 13 20 32 36 39 44 -
CFM 200 300 320 400 600 700 800 1000 -
Ps .032 .072 .082 .129 .289 .394 .514 .803 -
Horizontal Pt .044 .099 .113 .176 .396 .539 .704 1.100 -
1/2" Slot Width
PLENUM SLOT
NC 12 17 18 25 37 41 44 49 -
DIFFUSERS
CFM 100 150 160 200 300 350 400 500 600
Ps .025 .057 .065 .101 .228 .311 .406 .634 .913
Horizontal Pt .031 .070 .080 .125 .281 .382 .499 .780 1.123
Throw 9-12-16 12-14-20 12-15-21 13-16-23 16-20-28 18-22-30 19-23-33 21-26-36 23-28-40
2' Length
NC <10 <10 <10 18 29 33 36 42 46
8" Inlet
Ps .025 .057 .065 .101 .227 .310 .404 .63 .910
Pt .031 .070 .080 .124 .280 .381 .498 .777 1.119
Vertical
Throw 1-1-5 1-3-10 2-3-11 2-5-13 5-10-20 7-12-21 9-13-23 11-17-25 13-20-28
NC <10 <10 <10 16 29 33 37 41 44
CFM 200 300 320 400 600 700 800 1000 1200
Ps .025 .056 .064 .099 .224 .305 .398 .622 .895
Throw 6-12-23 12-19-28 13-20-29 17-23-33 23-28-40 25-30-43 27-33-46 30-36-51 33-40-56
4' Length
NC <10 14 15 21 32 36 39 45 49
CONTROLLERS
10" Inlet
Ps .025 .056 .063 .099 .223 .304 .396 .620 .892
Pt .037 .082 .094 .147 .330 .449 .587 .917 1.320
Vertical
Throw 2-5-13 5-10-20 6-11-20 9-13-23 13-20-28 16-21-30 18-23-32 21-25-36 23-28-39
NC <10 10 12 19 32 36 40 44 47
CFM 250 375 400 500 750 875 1000 1250 1500
Ps .024 .055 .062 .097 .219 .299 .390 .609 .877
Horizontal Pt .043 .097 .110 .172 .386 .526 .687 1.073 1.546
Throw 15-18-26 18-22-31 19-23-33 21-26-36 26-31-45 28-34-48 30-36-51 33-41-58 36-45-63
5' Length
NC <10 16 17 23 34 38 41 47 51
10" Inlet
Ps .024 .055 .062 .097 .219 .297 .389 .607 .874
Pt .043 .096 .110 .171 .386 .525 .686 1.071 1.543
Vertical
Throw 4-8-16 8-12-22 9-13-23 11-16-25 16-22-31 19-24-33 21-25-36 23-28-40 25-31-44
NC <10 12 14 21 34 38 42 46 49
PHPS
Throw 11-16-23 16-20-28 17-21-29 19-23-33 23-28-40 25-30-43 27-33-46 30-36-51 33-40-56
4' Length
NC <10 11 13 19 32 36 39 44 47
10" Inlet
Ps .016 .037 .042 .065 .148 .199 .260 .406 .584
Pt .028 .063 .072 .112 .253 .344 .450 .703 1.012
Vertical
Throw 1-3-9 3-6-13 3-7-14 5-9-18 9-13-27 10-16-30 12-18-32 15-22-36 18-27-39
NC <10 <10 <10 16 29 34 37 42 46
CFM 250 375 400 500 750 875 1000 1250 1500
Ps .017 .038 .043 .067 .151 .205 .268 .418 .602
Horizontal Pt .028 .063 .072 .112 .252 .343 .447 .699 1.007
Throw 11-17-36 17-22-31 18-23-33 21-26-36 26-31-45 28-34-48 30-36-51 33-41-58 36-45-63
5' Length
NC <10 13 15 21 34 38 41 46 49
12" Inlet
Ps .016 .036 .041 .064 .143 .195 .254 .398 .572
Pt .027 .061 .069 .109 .244 .332 .434 .678 .977
Vertical
Throw 2-5-12 5-9-18 6-9-19 8-12-24 12-18-31 14-21-33 16-24-36 20-28-40 24-31-44
PLENUM SLOT
NC <10 10 12 18 31 36 39 44 46
DIFFUSERS
CFM 100 150 160 200 300 350 400 500 600
Ps .016 .037 .042 .066 .148 .202 .264 .41412 .593
Horizontal Pt .019 .044 .050 .078 .175 .238 .311 .486 .700
Throw 6-10-16 10-14-20 10-15-21 13-16-23 16-20-28 18-22-30 19-23-33 21-26-36 23-28-40
2' Length
NC <10 <10 <10 10 19 23 27 33 38
10" Inlet
Ps .012 .028 .032 .050 .112 .152 .198 .310 .446
Pt .015 .035 .039 .061 .138 .188 .246 .384 .553
Vertical
Throw 1-1-3 1-2-4 1-2-5 2-3-6 3-4-9 3-5-10 4-6-12 5-7-15 6-9-18
NC <10 <10 <10 <10 12 17 21 27 31
CFM 200 300 320 400 600 700 800 1000 1200
Ps .016 .036 .041 .065 .145 .198 .258 .404 .581
PLENUM DIFFUSERS WITH
Horizontal
1 1/2" Slot Width
Throw 4-8-21 8-16-28 10-17-29 14-21-33 21-28-40 25-30-43 27-33-46 30-36-51 33-40-56
4' Length
NC <10 <10 <10 13 22 26 30 36 41
CONTROLLERS
12" Inlet
Ps .012 .027 .031 .049 .109 .149 .194 .304 .437
Pt .019 .044 .050 .077 .174 .237 .309 .483 .696
Vertical
Throw 1-2-4 2-3-6 2-3-7 3-4-9 4-6-13 5-8-15 6-9-17 7-11-22 9-13-26
NC <10 <10 <10 <10 15 20 24 30 34
CFM 250 375 400 500 750 875 1000 1250 1500
Ps .016 .036 .041 .063 .142 .194 .253 .396 .570
Horizontal Pt .027 .061 .069 .108 .244 .331 .433 .676 .974
Throw 7-14-26 14-21-31 15-22-33 19-26-36 26-31-45 28-34-48 30-36-51 33-41-58 36-45-63
5' Length
NC <10 11 12 15 24 28 32 38 43
12" Inlet
Ps .012 .027 .030 .048 .107 .146 .191 .298 .429
Pt .023 .052 .059 .093 .208 .283 .370 .578 .833
Vertical
Throw 1-3-6 3-4-9 3-5-9 4-6-11 6-9-17 7-10-20 8-11-23 9-14-28 11-17-34
NC <10 <10 <10 <10 17 22 26 32 36
PHPS
PSD20 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
PERFORMANCE NOTES FOR SERIES PHP
MODEL PHPS/PHPSI
All data is tested in accordance with ANSI/ASHRAE 70-2006.
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Pt Total pressure (inches of water column)
Ps Static pressure = PtPv (inches of water column)
Throw Isothermal throw (supply air temperature the same as average room temperature);
values are for 150, 100 and 50fpm velocities
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
PLENUM SLOT
DIFFUSERS
PLENUM DIFFUSERS WITH
ADJUSTABLE PATTERN
CONTROLLERS
PHPS
Optional
B B B B
Damper
DIFFUSERS
T-Bar Grid
CONTROLLERS
PHPSI-IT-75-9
Revision:
Revision: AA Plenum11/2013
Date:
Date: Slot Diffuser Ice Tong Blade - 3/4" Slot Width
11/2013 BoltDimensions
Slot are
Dimensions (Donn
in Fineline)
are in Insulated
Inches Page:
Inches 1 ofPage:
1 1 of 1
Metal Industries, Inc. Clearwater, FL (727) 441 - 2651 Fax (800) 865 8383 www.metalaire.com sales@metalaire.com
Metal Industries, Inc. Clearwater, FL
PHPS-IT-10-9 Plenum Slot Diffuser Ice(727) 441 - 2651
Tong Blade - Fax (800) 865 8383
1" Slot Width Boltwww.metalaire.com sales@metalaire.com
Slot (Donn Fineline) Non-insulated
PHPSI-IT-10-9 Plenum Slot Diffuser Ice Tong Blade - 1" Slot Width Bolt Slot (Donn Fineline) Insulated
PHPS-IT
PSD22 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
PHPS-IT SPECIFICATIONS
SUPPLY T-BAR LAY-IN SUPPLY DONN FINELINE/BOLT SLOT
INSULATED/NON-INSULATED CEILINGS INSULATED/NON-INSULATED
Plenum slot diffuser shall be METALAIRE PHPS-IT-6 Plenum slot diffuser shall be METALAIRE PHPS-IT-9 (non-
(non-insulated) or PHPSI-IT-6 (insulated). Plenum slot insulated) or PHPSI-IT-9 (insulated). Plenum slot diffusers
diffusers shall be of the sizes and mounting types as shall be of the sizes and mounting types as shown on the
shown on the device schedule. device schedule.
Diffusers shall have extruded aluminum ice tong Diffusers shall have extruded aluminum ice tong
deflector blades which produce a 180 air pattern. deflector blades which produce a 180 air pattern.
Units shall be adjustable from the slot opening to Units shall be adjustable from the slot opening to provide
provide horizontal to vertical air patterns. horizontal to vertical air patterns.
Inlets shall be round or oval, centrally located. Plenum Inlets shall be round or oval, centrally located. Plenum
diffusers shall be constructed of corrosion resistant diffusers shall be constructed of corrosion resistant
steel. Height of units shall be 11" or greater to maximize steel. Height of units shall be 11" or greater to maximize
diffuser performance. diffuser performance.
Units shall be available with 3/4" or 1" slot widths and Units shall be available with 3/4" or 1" slot widths and
be available with 1, 2, 3 or 4 independent supply slots. be available with 1, 2, 3 or 4 independent supply slots.
Diffuser face and air pattern controller shall be black. Diffuser face and air pattern controller shall be black.
Optional tees shall be white. Optional tees shall be white.
Insulated diffusers shall be Model PHPSI-IT. Insulation Insulated diffusers shall be Model PHPSI-IT. Insulation
shall be internal with optional external. shall be internal with optional external.
Performance Specification
The manufacturer shall provide published performance
PLENUM SLOT
data. Data shall be tested in accordance to ANSI/
DIFFUSERS
ASHRAE Standard 70-2006.
Available Options
CN Cross Notch (Standard on Units over 24")
PLENUM SLOT
DIFFUSERS
PLENUM DIFFUSERS WITH
ADJUSTABLE PATTERN
CONTROLLERS
PHPS-IT
PSD24 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES PHP PERFORMANCE DATA
MODEL PHPS-IT
CFM 30 50 70 90 110 130
2' Length Pt .017 .063 .131 .216 .323 .448
3/4" Width Horizontal
6" Inlet Throw 16 22 26 30 34 37
NC <20 21 29 35 39 43
CFM 50 70 90 110 130 150
2' Length Pt .032 .075 .125 .176 .262 .361
1" Width Horizontal
8" Inlet Throw 17 23 28 31 34 37
NC <20 24 29 34 38 41
1 Slot
PLENUM SLOT
NC <20 <20 21 25 32 37
DIFFUSERS
CFM 75 110 145 180 215 250
2' Length Pt .012 .037 .066 .103 .152 .202
3/4" Width Horizontal
8" Inlet Throw 16 26 35 41 46 50
NC <20 <20 23 28 33 38
CFM 75 120 165 210 255 300
2' Length Pt .007 .020 .043 .072 .110 .157
1" Width Horizontal
10" Inlet Throw 13 22 32 41 47 52
NC <20 <20 24 29 34 39
3 Slot
NC <20 <20 24 30 34 38
DEFINITION OF UNITS
Pt Total pressure (inches of water column)
Throw Distances in feet to terminal velocity of 50 fpm
Throw 1 and Throw 2 indicates number of slots throwing each direction on 3 slot, 2 way diffuser
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
PLENUM SLOT
DIFFUSERS
PLENUM DIFFUSERS WITH
ADJUSTABLE PATTERN
CONTROLLERS
PHPS-IT
PSD26 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
PLENUM DIFFUSERS WITH
HIGH CAPACITY FIXED PATTERN
CONTROLLERS
PLENUM SLOT
DIFFUSERS
deflection blade that minimizes pressure and noise and maximizes room
air mixing. PAGE 28
Model PHPS-E features the same aerodynamically curved control vane used
in the J Series. It maintains an air pattern tight against the ceiling in constant
Available with integral return, a low cost and efficient solution to return air into the ceiling plenum
PATTERN CONTROLLERS
HIGH CAPACITY FIXED
Inlet Size B C
6" Oval 3 15/16 7 1/8
8" Oval 3 15/16 10 3/8
10" Oval 3 15/16 13 3/8
PHCS
PSD28 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES PHC SPECIFICATIONS
SUPPLY T-BAR LAY-IN FIXED CURVED SUPPLY CENTER DOWN BLOW
BLADE INSULATED/NON-INSULATED T-BAR LAY-IN FIXED CURVED BLADE
INSULATED/NON-INSULATED
Plenum slot supply diffusers shall be METALAIRE PHCS-6
(non-insulated) or PHCSI-6 (insulated). Plenum slot Plenum slot supply diffusers shall be METALAIRE PHCS-
diffusers shall be of the sizes and mounting types as DB-6 (non-insulated) or PHCSI-DB-6 (insulated). Plenum
shown on the device schedule. slot diffusers shall be of the sizes and mounting types as
shown on the device schedule.
Units shall have an aerodynamically shaped extruded
aluminum curved blade deflector that provides a 1-way Plenum diffusers shall include a fixed curved blade supply
horizontal discharge pattern. air section and a center down-blow section. The supply
section shall have an aerodynamically shaped extruded
Inlets shall be centrally located, with a minimum depth of
aluminum curved blade deflector that provides a 1-way
2 1/8" for ease of duct connection. For straightness and
horizontal discharge pattern.
rigidity, plenums shall be fabricated using a two piece
panel construction and have a double metal thickness Plenum slot diffusers shall include an integral adjustable
hem at the face. Units fabricated using single wrapper center down-blow section that provides a vertical jet of
construction are not acceptable. Plenum diffusers shall supply air. Volume and direction of discharge air through
be constructed of corrosion resistant galvanized steel. center down-blow section shall be adjustable through the
face of the diffuser.
Diffuser face and air pattern controller shall be black.
Insulated diffusers shall be model PHCSI-6. Insulation
Inlets shall be centrally located, with a minimum depth of
2 1/8" for ease of duct connection. For straightness and
shall be internal.
rigidity, plenums shall be fabricated using a two piece
RETURN T-BAR LAY-IN FIXED CURVED panel construction and have a double metal thickness
BLADE INSULATED/NON-INSULATED hem at the face. Units fabricated using single wrapper
Plenum slot return diffusers shall be METALAIRE PHCR-6 construction are not acceptable. Plenum diffusers shall
PLENUM SLOT
(non-insulated) or PHCRI-6 (insulated). Plenum slot be constructed of corrosion resistant galvanized steel.
DIFFUSERS
diffusers shall be of the sizes and mounting types as Diffuser face and air pattern controller shall be black.
shown on the device schedule.
Insulated diffusers shall be model PHCSI-DB-6.
Plenum diffusers shall include a fixed curved blade supply Supply section insulation shall be internal.
air section and an integral plenum return section.
RETURN CENTER DOWN BLOW
The supply section shall have an aerodynamically shaped T-BAR LAY-IN FIXED CURVED BLADE
extruded aluminum curved blade deflector that provides a INSULATED/NON-INSULATED
one way horizontal discharge pattern. Plenum slot return diffusers shall be METALAIRE PHCR-
Unit shall have an integral plenum return section DB-6 (non-insulated) or PHCRI-DB-6 (insulated). Plenum
14" Oval
PATTERN CONTROLLERS
14" Oval
HIGH CAPACITY FIXED
PHCS
PSD30 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES PHCS PERFORMANCE DATA
MODEL PHCS/PHCSI
CFM/LF 20 30 40 50 60 80 90 100 110
CFM 40 60 80 100 120 160 180 200 -
Ps .010 .022 .040 .062 .089 .159 .201 .248 -
2'
Pt .013 .028 .050 .078 .113 .200 .254 .313 -
Length
Throw 1-2-7 2-5-11 4-7-14 6-9-18 7-11-19 10-14--22 11-16-24 12-18-25 -
NC <15 17 21 26 31 39 44 48 -
CFM 60 90 120 150 180 240 270 300 -
Ps .013 .029 .052 .081 .117 .208 .263 .324 -
3'
Pt .019 .042 .075 .117 .169 .301 .381 .470 -
Length
Throw 1-3-7 3-5-11 5-7-14 6-9-18 7-11-22 10-14-27 11-16-28 12-18-30 -
6" Round Inlet
NC <15 <15 16 22 27 36 41 46 -
CFM 80 120 160 200 240 320 360 400 440
Ps .015 .033 .059 .092 .132 .235 .298 .368 .445
4'
Pt .025 .056 .100 .157 .226 .401 .507 .626 .758
Length
Throw 2-5-10 5-7-14 6-10-19 8-12-24 10-14-37 13-19-31 14-22-33 16-24-35 18-26-36
NC <15 <15 <15 19 25 35 40 44 49
CFM 100 150 200 250 300 400 450 500 -
Ps .015 .034 .061 .095 .137 .243 .308 .380 -
5'
Pt .031 .071 .125 .196 .262 .502 .635 .784 -
Length
Throw 4-6-12 6-9-18 8-12-24 10-15-27 12-18-30 16-24-35 118-26-37 20-27-39 -
PLENUM SLOT
NC <15 <15 16 21 27 36 41 45 -
DIFFUSERS
CFM 40 60 80 100 120 160 180 200 -
Ps .006 .014 .026 .040 .058 .103 .130 .161 -
2'
Pt .007 .017 .029 .046 .066 .118 .149 .184 -
Length
Throw 0-1-3 1-2-5 2-3-7 3-4-8 3-5-10 5-7-14 5-8-15 6-8-16 -
NC <15 <15 19 24 28 37 41 46 -
CFM 60 90 120 150 180 240 270 300 330
Ps .009 .020 .036 .056 .081 .143 .181 .224 .271
3'
Pt .011 .025 .044 .069 .099 .177 .224 .276 .334
Length
Ps .010 .021 .038 .060 .086 .153 .193 .239 .289 .344
4'
Pt .011 .026 .046 .072 .103 .183 .232 .286 .346 .412
Length
Throw 2-3-7 3-5-10 5-7-13 6-8-15 7-10-16 9-13-19 10-14-20 11-15-21 13-16-22 13-16-23
NC <15 <15 <15 <15 20 30 35 39 44 48
CFM 100 150 200 250 300 400 450 500 550 600
Ps .011 .024 .043 .068 .097 .173 .219 .271 .328 .390
5'
Pt .014 .031 .055 .086 .124 .221 .279 .345 .417 .497
Length
Throw 3-4-8 4-6-13 6-8-15 7-11-17 8-13-18 11-15-21 13-16-23 14-17-24 14-18-25 15-18-26
NC <15 <15 <15 17 23 32 36 40 43 47
CFM 80 120 160 200 240 320 360 400 440 480
Ps .008 .019 .033 .052 .075 .134 .170 .209 .253 .301
4'
Pt .010 .021 .038 .060 .086 .152 .193 .238 .288 .343
Length
Throw 2-3-6 3-5-10 4-6-13 5-8-15 6-10-16 8-13-19 10-14-20 11-15-21 12-16-22 13-16-23
12" Oval Inlet
PLENUM SLOT
CFM 100 150 200 250 300 400 450 500 550 600
Ps .010 .023 .040 .063 .091 .162 .205 .253 .306 .364
5'
Pt .012 .027 .048 .074 .107 .190 .241 .298 .360 .428
Length
Throw 3-4-8 4-6-12 5-8-15 7-10-17 8-12-18 11-15-21 12-16-22 13-17-23 14-17-25 15-18-26
NC <15 <15 <15 16 21 30 34 38 41 45
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Pt Total pressure (inches of water column)
Ps Static pressure = PtPv (inches of water column)
Throw Isothermal throw (supply air temperature the same as average room temperature);
values are for 150, 100 and 50fpm velocities
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
PHCS
PSD32 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES PHCS PERFORMANCE DATA
MODEL PHCS/PHCSI-DB
CFM/LF 20 30 40 50 60 70 80 90 100
CFM 60 90 120 150 180 210 240 270 -
Ps .049 .111 .198 .309 .445 .606 .791 1.001 -
PLENUM SLOT
Ps .031 .069 .122 .191 .275 .375 .489 .619 .764
DIFFUSERS
3' Pt .033 .074 .131 .204 .294 .400 .523 .662 .817
Length Throw H 1-3-9 3-6-13 6-9-16 7-11-18 9-13-20 10-15-22 11-16-23 13-17-24 14-18-26
Throw V 1-1-2 1-2-3 1-2-4 2-3-4 2-3-5 2-4-5 3-4-5 3-4-6 3-4-6
NC 15 20 24 28 33 37 40 44 47
12" x 7/16" Down Blow Slot
4' Pt .022 .048 .086 .134 .194 .264 .344 .436 .538
Length Throw H 2-6-11 6-9-16 8-11-19 9-14-21 11-16-23 13-18-25 15-19-27 16-20-28 17-21-30
CFM 100 150 200 250 300 350 400 450 500
Ps .016 .035 .063 .098 .141 .192 .251 .317 .391
CONTROLLERS
5' Pt .021 .048 .086 .134 .193 .263 .344 .435 .537
Length Throw H 4-7-14 7-11-18 9-14-21 12-17-23 14-18-26 16-20-28 17-21-30 18-22-32 19-23-33
PATTERN
Throw V 1-2-3 2-3-4 2-3-5 3-4-6 3-4-6 4-5-7 4-5-7 4-5-8 5-6-8
FIXED
NC <15 <15 15 23 29 35 40 44 47
PHCS
2013
2016 Metal Industries, Inc. PSD33
SERIES PHCS PERFORMANCE DATA
MODEL PHCS/PHCSI-DB
CFM/LF 20 30 40 50 60 70 80 90 100 110
CFM 60 90 120 150 180 210 240 270 300 330
Ps .015 .034 .060 .094 .136 .185 .241 .305 .377 .456
3' Pt .016 .036 .065 .101 .145 .198 .258 .327 .404 .488
Length Throw H 1-2-6 2-4-8 3-6-11 5-7-14 6-8-17 7-10-19 8-11-21 8-13-22 9-14-23 10-16-24
Throw V 1-1-2 1-1-2 1-2-3 1-2-4 2-2-4 2-3-5 2-3-5 2-4-5 3-4-5 3-4-6
NC <15 16 21 25 29 33 37 41 44 47
12" x 7/16" Down Blow Slot
CFM 80 120 160 200 240 280 320 360 400 440
Ps .015 .034 060 .093 .134 .182 .238 .302 .372 .451
10" Oval Inlet
4' Pt .017 .038 .067 .105 .151 .206 .269 .340 .420 .508
Length Throw H 1-3-8 3-6-11 5-8-15 6-9-19 8-11-21 9-13-22 10-15-24 11-17-25 13-19-27 14-20-28
Throw V 1-1-2 1-2-3 1-2-4 2-3-4 2-3-5 3-4-5 3-4-6 3-4-6 4-4-6 4-5-7
NC <15 <15 20 25 30 34 38 41 45 49
CFM 100 150 200 250 300 350 400 450 500 -
Ps .014 .031 .055 .086 .124 .169 .221 .280 .345 -
5' Pt .017 .038 .067 .105 .151 .206 .269 .340 .420 -
Length Throw H 2-5-9 5-7-14 6-9-19 8-12-21 9-14-23 11-16-25 13-19-27 14-20-29 16-21-30 -
Throw V 1-1-3 1-2-4 2-3-4 2-3-5 3-4-5 3-4-6 4-4-6 4-5-7 4-5-7 -
NC <15 <15 <15 21 28 34 39 43 47 -
CFM 80 120 160 200 240 280 320 360 400 440
Ps .013 .029 .051 .080 .115 .157 .205 .259 .320 .387
4' Pt .014 .031 .056 .087 .126 .171 .223 .282 .349 .422
PLENUM SLOT
DIFFUSERS
Length
12" Oval Inlet 12" x 7/16"
Throw H 1-3-7 3-5-11 5-7-14 6-9-18 7-11-20 8-12-22 10-14-23 11-16-25 12-18-26 13-19-27
Throw V 1-1-2 1-2-3 1-2-4 2-3-4 2-3-5 3-4-5 3-4-6 3-4-6 4-4-6 4-5-7
Down Blow Slot
NC <15 <15 18 24 28 32 36 40 43 47
CFM 100 150 200 250 300 350 400 450 500 550
Ps .012 .027 .049 .076 .109 .149 .194 .246 .303 .367
5' Pt .014 .031 .056 .087 .125 .171 .223 .282 348 .421
Length Throw H 2-4-9 4-7-13 6-9-18 7-11-21 9-13-23 10-16-24 12-18-24 13-20-28 15-21-29 16-22-31
Throw V 1-1-3 1-2-4 2-3-4 2-3-5 3-4-5 3-4-6 4-4-6 4-5-7 4-5-7 4-5-7
NC <15 <15 <15 19 26 32 36 41 45 49
PLENUM DIFFUSERS WITH
CONTROLLERS
PATTERN
MODEL PHCS/PHCSI-DB
CONTROLLERS
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Pt Total pressure (inches of water column)
PATTERN
PSD34 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
MODEL PHPS-J
The PHPS-J is a high capacity diffuser with fixed
PHPSJ aerodynamic
ProductDescription
control vanes. The fixed vanes provide
ThePHPSJisahighcapacitydiffuserwithfixed
a full range of air flow. It is an excellent choice for
aerodynamiccontrolvanes.Thefixedvanesprovide
variable volume systems. The pattern controllers are
afullrangeofairflow.Itisanexcellentchoicefor
integral with the diffuser and can be fixed in a one
variablevolumesystems.Thepatterncontrollers
way or two way air pattern.
areintegralwiththediffuserandcanbefixedina
Corrosion resistant steel construction
PHPSJ ProductDescription
onewayortwowayairpattern.
Lower flanges provide
ThePHPSJisahighcapacitydiffuserwithfixed
tile support as an integral part of the diffuser housing
Corrosionresistantsteelconstruction
aerodynamiccontrolvanes.Thefixedvanesprovide
Available in 1 to 4 slots
Lowerflangesprovidetilesupportasanintegral
afullrangeofairflow.Itisanexcellentchoicefor
Available lengthsvariablevolumesystems.Thepatterncontrollers
24", 36", 48" and 60"
partofthediffuserhousing
areintegralwiththediffuserandcanbefixedina
Optional insulation on PHPSI-J
Availablein1to4slots onewayortwowayairpattern.
Availablelengths24,36,48and60
Corrosionresistantsteelconstruction
OptionalinsulationonPHPSIJ
PHPS-J11-6 One 1Lowerflangesprovidetilesupportasanintegral
Slot Way Non-insulated PHPSI-J11-6 One Slot 1 Way Insulated
PHPS-J21-6
partofthediffuserhousing
Two Slot 1 Way Non-insulated PHPSI-J21-6 Two Slot 1 Way Insulated
Availablein1to4slots
PHPS-J22-6 Two Slot
2Availablelengths24,36,48and60
Way Non-insulated PHPSI-J22-6 Two Slot 2 Way Insulated
PHPS-J31-6 ThreeSlotOptionalinsulationonPHPSIJ
1 Way Non-insulated PHPSI-J31-6 Three Slot 1 Way Insulated
PHPS-J32-6 Three Slot 2 Way Non-insulated PHPSI-J32 -6 Three Slot 2 Way Insulated
PHPS-J41-6 Four Slot 1 Way Non-insulated PHPSI-J41-6 Four Slot 1 Way Insulated
PHPS-J42-6 Four Slot 2 Way Non-insulated PHPSI-J42-6 Four Slot 2 Way Insulated
PLENUM SLOT
DIFFUSERS
Model W
Inlet Diameter H
5, 6 9 1/4
7, 8, 9 12 7/16
10 14
PATTERN CONTROLLERS
PSD36 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES PHPS-J PERFORMANCE DATA
MODEL PHPS-J
CFM 20 40 60 80 100 CFM 120 240 360 480 600
1 Slot Ps .010 .030 .060 .100 .150 3 Slot Ps .010 .030 .060 .120 .190
1-Way Throw 11 17 22 25 27 1-Way Throw 17 27 35 40 43
NC <20 <20 <20 22 27 NC <20 <20 21 30 37
CFM 40 80 120 160 200 CFM 120 240 360 480 600
2 Slot Ps .010 .030 .070 .120 .180 Ps .010 .030 .060 .100 .160
4' Length
1-Way 3 Slot
Throw 14 21 27 31 34 Throw 1 11 17 22 25 27
2-Way
NC <20 <20 <20 26 31 Throw 2 14 21 27 31 34
CFM 40 80 120 160 200 NC <20 <20 22 31 38
2 Slot Ps .010 .030 .060 .090 .140 CFM 160 320 480 640 800
2-Way Throw 11 17 22 25 27 4 Slot Ps .010 .030 .060 .110 .170
NC <20 <20 <20 22 27 2-Way Throw 14 21 27 31 34
2' Length
PLENUM SLOT
NC <20 <20 <20 26 32 1-Way Throw 14 21 27 31 34
DIFFUSERS
CFM 80 160 240 320 400 NC <20 <20 24 35 43
4 Slot Ps .010 .030 .060 .100 .150 CFM 100 200 300 400 500
2-Way Throw 14 21 27 31 34 2 Slot Ps .010 .030 .060 .110 .170
NC <20 <20 21 29 36 2-Way Throw 11 17 22 25 27
NC <20 <20 21 30 37
5' Length
CFM 40 80 120 160 200 CFM 150 300 450 600 750
1 Slot Ps .010 .030 .080 .140 .200 3 Slot Ps .010 .030 .070 .130 .210
1-Way Throw 11 17 22 25 27 1-Way Throw 17 27 35 40 43
2 Slot Ps .010 .040 .080 .140 .220 Ps .010 .030 .060 .110 .180
1-Way 3 Slot
Throw 14 21 27 31 34 Throw 1 11 17 22 25 27
2-Way
NC <20 <20 21 30 37 Throw 2 14 21 27 31 34
CFM 80 160 240 320 400 NC <20 <20 25 36 44
2 Slot Ps .010 .030 .060 .090 .150 CFM 200 400 600 800 1000
2-Way Throw 11 17 22 25 27 4 Slot Ps .010 .030 .070 .130 .200
NC <20 <20 <20 26 32 2-Way Throw 14 21 27 31 34
NC <20 <20 32 40 48
PHPS-J
DEFINITION OF UNITS
Ps Static pressure = PtPv (inches of water column)
Throw Distances in feet to terminal velocity of 50 fpm
Throw 1 and Throw 2 indicates number of slots throwing each direction on 3 slot, 2-way diffuser
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
PLENUM SLOT
DIFFUSERS
PLENUM DIFFUSERS WITH
PATTERN CONTROLLERS
HIGH CAPACITY FIXED
PHPS-J
PSD38 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
MODEL PHPS-E
The PHPS-E features the same aerodynamically
curved control vanes used in the PHPS-J. It maintains
an air pattern tight against the ceiling in constant
or variable control systems. At only 9" of height,
the PHPS-E requires minimum space but provides
maximum performance and flexibility for interior or
perimeter applications.
Control vanes have double metal thickness at slot face for additional strength and rigidity
Pattern
Tag: Control Vanes are shipped loose to allow field installation for left or right throw
Engineer:
(factory
Project: installation for additional charge)
Contractor:
Corrosion
Location: resistant steel construction Architect: Submittal PHPS-E-6 / PHPSI-E-6
Date:
Available in 1 and 2 slots
Submitted By:
Optional insulation
The E-Series featureson
thePHPSI-E
same aerodynamically At only 9" of height, the E-Series requires minimum
curved control vane used in the J-Series. It maintains space but provides maximum performance and
Available
an air pattern
for tight
Donnagainst the ceiling
Fine Line/Bolt in constant
Slot or
application flexibility for interior or perimeter applications.
variable air control systems.
Insulation
Options
PLENUM SLOT
STD
DIFFUSERS
1/2" Fiberglass
Optional Internal
1/2" CC
Closed Cell
Fiberglass Foam
Insulation EI
External 9"
Insulated
1/2" Foil Back
A S A A S EN S A A S CT S A
60" 2 PHPS-E / PHPSI-E Rev B Date 07/12/11 Dimension Are In Inches Page 1 of 1
PATTERN CONTROLLERS
HIGH CAPACITY FIXED
PHPS-E
PSD40 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES PHPS PERFORMANCE DATA
MODEL PHPS-E
CFM 40 50 60 80 100 120
NC <20 <20 25 31 35 37
PLENUM SLOT
CFM 175 225 275 350 425 500
DIFFUSERS
2 Slot Pt .020 .030 .050 .080 .120 .160
10" Inlet Throw 7 9 11 14 17 19
NC <20 <20 <20 25 30 34
Model LT light troffer is designed with the flexibility to mount onto all air
diffusion light fixtures. Each order is engineered to allow for a custom fit onto
each light fixture. This ensures tight fit with the light fixture regardless of
which lighting manufacturer has been selected. PAGE 43
PLENUM SLOT
DIFFUSERS
LIGHT TROFFER DIFFUSERS
PSD42 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
MODEL LT
The LT high performance light troffer diffusers is
designed to attach quickly and easily to standard air
handling fluorescent light fixtures. Light troffer diffusers
have the architectural advantage of hiding the air
distribution device by using a small slot on the outside
of the light fixture to discharge or return conditioned air.
Tag:
The LT cuts down on ceiling clutter by using the same
*AIRE
METAL
Series : HP
ceiling opening for the light fixture and air diffuser. Submittal No: HP-LT
Lightexcellent
Provides Troffer air Diffuser
distribution while hiding the air distribution device into the light fixture
Galvanized Steel
Custom engineered to ensure a tight fit with minimum leakage
Models: SS-LT-6 Single Sided Supply - Non Insulated
Optional 1/2" internal
SSI-LT-6 Single
insulation Sided Supply - Insulated
available
SSR-LT-6 Single Sided Return - Non Insulated
Available withSSRI-LT-6
single or doubleSingle
sided supply configurations
Side Return - Insulated
DS-LT-6 Double Sided Supply - Side Inlet - Non Insulated
Model DS-LT double sided diffuser is available with side or top inlets for installation flexibility
DSI-LT-6 Double Sided Supply - Side Inlet - Insulated
Matching single
DST-LT-6
sided plenumDouble Sided
return unit Supply
model - Top
SSR-LT Inlet - Non Insulated
is available
DSTI-LT-6 Double Sided Supply - Top Inlet - Insulated
PLENUM SLOT
* Typical air diffuser lengths vary with air handling
Air Pattern
DIFFUSERS
light troffer manufacturer. Specify the light fixture
Optional Deflector
Troffer manufacturer's name and model number on all orders.
Slot Ceiling clearance required is typically 8" but can be
Side Inlet Location Regress 3 as little as 6" above the ceiling line.
Hold Down Tabs 4
Number HP-LT
Optional Top Troffer Lengths
Typical Air Diffuser Length (L*) 1
12 Inlet Location
Crossover Length (C)
1
12 (Width
Nominalx Length) W" Air L"
Typical C
Light Troffer Diffuser Dimensions
12 x 48
(Width x Length) W* 12 L* 40C 18
3 2
8 24
12 x 48 x 24 12 2440 1718 12
Air 5
24 X 24 24
Diffuser Crossover 24 x 48 2417 4012 18
Volume Control 24 X 48 24 40 18
Height
36 x 36 36
25 3/4 25 3/4 18
model SSR-LT-6, non-insulated. Internal insulation shall be 1/2" thick. External insulation
shall be 1/2" thick with a vapor barrier.
PLENUM SLOT
DIFFUSERS
Performance Specification
The manufacturer shall provide published performance
data. Data shall be tested in accordance to ANSI/
ASHRAE Standard 70-2006.
LIGHT TROFFER DIFFUSERS
LT
PSD44 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
LT MODEL NUMBER SPECIFICATION
LIGHT TROFFER DIFFUSER
Single Sided Supply Inlets Module Available Finishes
SS-LT-6 Non-insulated 4" 24" x 24" Standard
SS-LT-6 Insulated 5" 36" x 36" 27 All Black
PLENUM SLOT
DIFFUSERS
LIGHT TROFFER DIFFUSERS
LT
NC <15 <15 15 22 28 33 37 44
CFM 20 30 40 50 60 70 80 100
Ps .019 .043 .077 .121 .174 .237 .309 .483
Horizontal Pt .020 .045 .080 .125 .180 .245 .320 .499
Throw 2-3-6 3-5-9 4-6-11 5-8-12 6-9-13 7-10-14 9-11-15 10-12-17
NC <15 <15 15 22 28 33 37 44
6" Inlet
CFM 20 30 40 50 60 70 80 100
Ps .019 .043 .077 .121 .174 .237 .309 .483
Vertical Pt .020 .045 .080 .125 .180 .245 .320 .499
Throw 1-2-4 2-3-5 2-4-7 3-4-8 4-5-9 4-6-9 5-7-10 6-8-11
NC <15 <15 15 22 28 33 37 44
CFM 30 45 60 75 90 105 120 -
PLENUM SLOT
DIFFUSERS
NC <15 <15 18 25 31 37 42 -
LIGHT TROFFER DIFFUSERS
PSD46 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES SS-LT PERFORMANCE DATA
MODEL SS-LT/SSI-LT
CFM/LF 10 15 20 25 30 35 40 50
CFM 40 60 80 100 120 140 - -
Ps .028 .062 .111 .173 .250 .340 - -
Horizontal Pt .033 .075 .132 .207 .298 .406 - -
Throw 1-2-6 2-4-9 4-6-10 5-7-12 6-9-13 7-10-14 - -
NC <15 <15 23 30 37 44 - -
5" Inlet
CFM 40 60 80 100 120 140 - -
Ps .026 .059 .105 .164 .236 .321 - -
Vertical Pt .032 .071 .126 .197 .284 .387 - -
Throw 1-2-4 2-3-6 3-4-8 3-5-8 4-6-9 5-7-10 - -
4' Length
NC <15 <15 23 30 37 44 - -
CFM 40 60 80 100 120 140 - -
Ps .028 .062 .111 .173 .250 .340 - -
Horizontal Pt .030 .068 .121 .190 .273 .372 - -
Throw 1-2-6 2-4-9 4-6-10 5-7-12 6-9-13 7-10-14 - -
NC <15 <15 23 30 37 44 - -
6" Inlet
CFM 40 60 80 100 120 140 - -
Ps .026 .059 .105 .164 .236 .321 - -
Vertical Pt .029 .065 .115 .180 .259 .352 - -
Throw 1-2-4 2-3-6 3-4-8 3-5-8 4-6-9 5-7-10 - -
PLENUM SLOT
NC <15 <15 23 30 37 44 - -
DIFFUSERS
LIGHT TROFFER DIFFUSERS
LT
Ps .017 .030 .048 .069 .093 .122 .154 .191 .231 .274
Horizontal Pt .024 .043 .067 .096 .130 .170 .215 .266 .322 .383
Throw 0-1-4 1-2-5 1-2-6 2-4-7 2-4-8 3-5-10 4-5-10 4-6-11 4-7-11 5-7-12
NC <15 <15 <15 16 21 25 29 32 35 37
5" Inlet
45 60 75 90 105 120 135 150 165 180
Ps .017 .030 .048 .069 .093 .122 .154 .191 .231 .274
Vertical Pt .024 .043 .067 .096 .130 .170 .215 .266 .322 .383
Throw 0-1-3 1-2-4 1-2-5 2-3-7 2-4-7 3-4-8 3-5-8 4-5-9 4-6-9 4-7-9
NC <15 <15 <15 16 21 25 29 32 35 37
3' x 3'
LIGHT TROFFER DIFFUSERS
PSD48 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES DS-LT PERFORMANCE DATA
MODEL DS-LT/DSI-LT - TOP INLET
WxL CFM/LF 15 20 25 30 35 40 45 50 55 60
CFM 60 80 100 120 140 160 180 200 220 -
Ps .023 .042 .065 .094 .127 .166 .210 .260 .314 -
Horizontal Pt .035 .063 .099 .142 .193 .252 .319 .394 .477 -
Throw 1-2-4 2-3-5 2-3-7 3-4-8 3-5-8 4-5-9 4-6-9 4-7-10 5-7-10 -
NC <15 <15 16 21 26 30 33 37 41 -
5" Inlet
CFM 60 80 100 120 140 160 180 200 220 -
Ps .023 .042 .065 .094 .127 .166 .210 .260 .314 -
4' x 4'
Vertical Pt .035 .063 .099 .142 .193 .252 .319 .394 .477 -
Throw 0-1-4 1-2-5 1-2-6 2-4-6 2-4-7 3-5-7 4-5-8 4-6-8 4-6-8 -
NC <15 <15 16 21 26 30 33 37 41 -
2' x 4'
Horizontal Pt .027 .047 .074 .107 .145 .189 .240 .296 .358 -
Throw 1-2-4 2-3-5 2-3-7 3-4-8 3-5-8 4-5-9 4-6-9 4-7-10 5-7-10 -
NC <15 <15 16 21 26 30 33 37 41 -
6" Inlet
CFM 60 80 100 120 140 160 180 200 220 -
Ps .021 .037 .058 .083 .113 .148 .187 .231 .280 -
Vertical Pt .027 .047 .074 .107 .145 .189 .240 .296 .358 -
Throw 0-1-4 1-2-5 1-2-6 2-4-6 2-4-7 3-5-7 4-5-8 4-6-8 4-6-8 -
PLENUM SLOT
NC <15 <15 16 21 26 30 33 37 41 -
DIFFUSERS
LIGHT TROFFER DIFFUSERS
LT
Ps .021 .038 .059 .085 .115 .150 .190 .235 .284 .339
Horizontal Pt .028 .050 .078 .112 .152 .199 .252 .311 .376 .447
Throw 0-1-4 1-2-5 1-2-6 2-4-7 2-4-8 3-5-9 4-5-11 4-6-11 4-6-12 5-7-12
NC <15 <15 <15 19 24 28 31 34 36 39
5" Inlet
45 60 75 90 105 120 135 150 165 180
Ps .021 .038 .059 .085 .115 .150 .190 .235 .284 .339
Vertical Pt .028 .050 .078 .112 .152 .199 .252 .311 .376 .447
Throw 0-1-4 1-2-5 1-2-6 2-4-7 2-4-8 3-5-10 4-5-11 4-6-12 4-7-12 5-7-13
NC <15 <15 <15 19 24 28 31 34 36 39
3' x 3'
LIGHT TROFFER DIFFUSERS
PSD50 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES DS-LT PERFORMANCE DATA
MODEL DS-LT/DSI-LT - SIDE INLET
WxL CFM/LF 15 20 25 30 35 40 45 50 55 60
CFM 60 80 100 120 140 160 180 200 - -
Ps .031 .056 .087 .125 .171 .223 .282 .349 - -
Horizontal Pt .043 .077 .121 .174 .237 .309 .391 .483 - -
Throw 1-2-3 1-2-4 2--3-5 2-3-6 2-4-7 3-4-8 3-5-9 3-5-10 - -
NC <15 <15 20 25 29 33 37 41 - -
5" Inlet
CFM 60 80 100 120 140 160 180 200 - -
Ps .031 .056 .087 .125 .171 .223 .282 .349 - -
4' x 4'
PLENUM SLOT
NC <15 <15 20 25 29 33 37 41 - -
DIFFUSERS
PERFORMANCE NOTES FOR SERIES PHP
MODEL DS-LT
All data is tested in accordance with ANSI/ASHRAE 70-2006.
DEFINITION OF UNITS
Pt Total pressure (inches of water column)
Throw Isothermal throw (supply air temperature the same as average room temperature);
values are for 150, 100 and 50fpm velocities
NC Noise criterion, sound pressure level NC ratings are based on sound power
LT
Submittal: LQ
Locking Quadrant Damper
MODEL LQ
2 3/16"
PLENUM SLOT
The Locking Quadrant is Srtamped of Heavy Guage Steel and Clearly Indicates the Position of the Damper.
The Quadrant Handle Locks the Shaft of the Damper using a Friction Device strong enough to cut into the
Damper Shaft Eliminating Damper Rattle.
ACCESSORIES
PSD52 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
MODEL PHP-TBPF
Plaster frames permit installation of T-bar frame style plenum slot
diffusers into plaster frames or gypsum ceilings.
Converts T-bar frame to Surface Mount
Available in standard T-bar sizes
PLENUM SLOT
DIFFUSERS
B
Models L 1 Slot 2 Slots 3 Slots 4 Slots
PHP-TBPF-50 24, 36, 48, 60 1 3/4 3 1/4 4 3/4 6 1/4
PHP-TBPF-75 24, 36, 48, 60 2 3 3/4 5 1/2 7 1/4
PHP-TBPF-10 24, 36, 48, 60 2 1/4 4 1/4 6 1/4 8 1/4
PHP-TBPF-15 24, 36, 48, 60 2 3/4 5 1/4 7 3/4 10 1/4
ACCESSORIES
ENVIRONMENT
PRODUCTS
CRITICAL
HPL-GS
Model HPL-CL laminar flow diffuser is engineered for supply air distribution
LAMINAR FLOW DIFFUSERS
Model HPL-HA laminar flow diffuser has the same features as the HPL-CL
and is designed with a gasket type HEPA filter cell accessible from the face
of the diffuser. PAGE 7
CE2 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES HPL-CL
HPL-CL Laminar Flow Diffuser is engineered for
supply air distribution in critical environments such
as hospital operating rooms and clean rooms.
The diffusers are engineered to supply a low velocity
vertical piston of conditioned air. The diffuser by
design is easy to clean and sterilize. The face
and core assembly can be removed from the face
for cleaning.
Low velocity vertical air pattern
Easily removable face to allow cleaning and sterilization
Choice of all aluminum, stainless steel face and aluminum backpan or all stainless steel construction
Choice of 23%, 40% and standard 51% free area for the perforated face
Neck Size - 81
24 x 12 25 1/4 x 13 1/4 23 3/4 x 11 3/4 23 5/8 x 11 5/8
Quarter Turn
Fasteners 36
Nominal x 12 37 1/4Face
Overall x 13Sizes
1/4 (L x W) 35 3/4 x 11 3/4 35 5/8 x 11 5/8
2" Sizes
9 Border 1 Border 6 Border 6M
32 Countertop (L x W)
Mounting Hole 4" 48 x 25-1/4
24 x 12
12 x 13-1/449 1/4 x 13 1/4
23-3/4 x 11-3/4
47 3/4 x 11 3/4
23-5/8 x 11-5/8
47 5/8 x 11 5/8
36 x 24
12 x 37-1/4
24 x 13-1/425 1/4 x 25
35-3/4 1/4
x 11-3/4 35-5/823 3/4 x
x 11-5/8 23 3/4 23 5/8 x 23 5/8
5/8" Removable Perforated Face Panel
48 x 12 49-1/4 x 13-1/4 47-3/4 x 11-3/4 47-5/8 x 11-5/8
141" Border Width 36 x 24 37 1/4 x 25 1/4 35 3/4 x 23 3/4 35 5/8 x 23 5/8
Perforated Face Panel = Nominal Size - 1 38 60 x 12 61-1/4 x 13-1/4 59-3/4 x 11-3/4 59-5/8 x 11-5/8
T-Bar Module = Nominal Size 48 x 24 49-1/4 x 25-1/4 47-3/4 x 23-3/4 47-5/8 x 23-5/8
Overall Backpan = Nominal Size -1 81 60 x 24 61-1/4 x 25-1/4 59-3/4 x 23-3/4 59-5/8 x 23-5/8
ENVIRONMENT
Backpan Neck Size - 81 72 x 24 73-1/4 x 25-1/4 71-3/4 x 23-3/4 71-5/8 x 23-5/8
CRITICAL
60 x 36 61-1/4 x 37-1/4 59-3/4 x 35-3/4 59-5/8 x 35-5/8
4"
72 x 36 73-1/4 x 37-1/4 71-3/4 x 35-3/4 71-5/8 x 35-5/8
0RGHO+3/&/$/%RUGHU0/D\,Q7%DU0HWULF6L]LQJ
T-Bar Module = Nominal Size
Overall Backpan = Nominal Size -1 81
Backpan Neck Size - 81
HPL-CL
2"
4"
4"
L = Overall Length
W = Overall Width
Removable Perforated
Face Panel
4 4
0RGHO+3/&/6$%RUGHU0/D\,Q7%DU0HWULF
T-Bar Module = Nominal Size Frame
Frame 1 1 Frame 6Frame Frame
6F 6M Frame 6M
5 Nominal
Nominal
Backpan = Nominal Size - 18
Size Size C C WW LL W WL W L L W L
36 x 1212 x 3612 x 36
12 x 36 1313
1/41/4 3737 1/411 3/4 11353/4
1/4 3/4 11 35
5/83/4
35 5/8 11 5/8 35 5/8
4 12 x 48 13 1/4
48 x 1212 x 4812 x 48 13 1/4 49 1/4 11 3/4 47 3/4 11 5/8 47 5/8
49 1/4 11 3/4 47 3/4 11 5/8 47 5/8
LAMINAR FLOW DIFFUSERS
4 4
CE4 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES HPL-CL SPECIFICATIONS
LAMINAR FLOW DIFFUSER ALUMINUM/ Performance Specification
STAINLESS STEEL MODEL HPL-CL-AL / The manufacturer shall provide published performance
HPL-CL-SA / HPL-CL-SS data. Data shall be tested in accordance to ANSI/
Air outlets shall be model HPL-CL-AL (aluminum), ASHRAE Standard 70-2006.
HPL-CL-SA (stainless steel face/aluminum backpan) or
HPL-CL-SS (stainless steel) manufactured by METALAIRE. Paint Specification
Diffuser shall include an upper and lower pressure METALAIRE 01 paint finish is an anodic electro-
chamber and shall generate a low velocity, vertical piston deposition Melamine cross linking thermo set acrylic
of discharge air. enamel finish, conforming to no less than 9 specific
Diffuser shall be constructed of a one-piece perforated ASTM testing requirements covering a full range of
face and core assembly that is removable from the physical properties. The 01 finish has been tested to
backpan with 1/4" turn fasteners accessible from the exceed ASTM D4752 Double MFK minimum 100 rubs.
face. Face and core assembly mounted with internal This test demonstrates METALAIRE products ability to
spring clips or other mechanical fastening devices are withstand continuous cleaning with harsh cleaners and
not acceptable. Units shall include stainless steel safety disinfectants. Following are the ASTM specifications for
chains attaching the face assembly to the backpan. physical properties.
Core and face assembly shall be removable to allow ASTM D523-89 Gloss 60 Degree 70-80
access to the backpan for cleaning. The face shall be ASTM D3363-92A Pencil Hardness HB-H
ENVIRONMENT
PRODUCTS
CRITICAL
HPL-CL
100 - - - - .107 39
PRODUCTS
CRITICAL
DEFINITION OF UNITS
Ps Static pressure loss through the diffuser and does not include velocity pressure
NC Based on Lw re: 10-12 watt, includes 10dB room attenuation and a maximum inlet velocity of 500fpm
CFM Cubic Feet per Minute (air)
fpm Velocity of air stream in Feet per Minute
HPL-CL
CE6 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES HPL-HA
The HPL-HA laminar flow diffuser design integrates a HEPA
filter rack accessible from the face of the diffuser. The
HPL-HA is engineered for supply air distribution in critical
environments such as hospital operating rooms, laboratories
and clean rooms. The diffusers are engineered to supply a
low velocity piston of air.
Face and core assembly is easily removable for cleaning Submittal: HPL-HA-AL
and sterilization
Laminar Flow Hospital Diffusers
Border 1Choice of 23%, 40% and standard 51% free area for the perforated face
/ Border 6 / Border 6M
Submittal: HPL-HA-AL
Models: Optional gasket HEPA filter available
HPL-HA-AL-1 Aluminum Face & Backpan - Surface Mount
HPL-HA-AL-6
Stainless steel
Laminar Flow Hospital
safety AluminumDiffusers
chains are Face & Backpan - Standard Lay in T-Bar
standard
Border 1 / BorderAluminum
HPL-HA-AL-6M 6 / Border 6M & Backpan - Metric Sizing
Face
Available in all aluminum, stainless steel face/aluminum backpan, or all stainless steel construction
Models: HPL-HA-AL-1 Aluminum Face & Backpan - Surface Mount
HPL-HA-AL-6 Aluminum Face & Backpan - Standard Lay in T-Bar
Model: HPL-HA-AL (Aluminum Backpan & Face) 2.00 Duct Size - 14
HEPA
HPL-HA-AL-6M Aluminum Face & Backpan - Metric Sizing Filter
Backpan
ENVIRONMENT
Model: HPL-HA-AL-1 Border 1 HPL-HA-AL-6 Border 6 Model: HPL-HA-AL
C =(Surface Mount)= Nominal Size
Ceiling Opening (Standard
T-Bar Module = Lay In T-Bar)
Nominal Size Test Port
With Test Port PRODUCTS
CRITICAL
C = Ceiling Opening = Nominal Size T-Bar Module = Nominal Size Test Port
3 3 Test Port
9 3 3 9 Test Port
9 9
3
16 3
16
Mounting Removable Perforated Removable Perforated
Mounting Removable Perforated Removable Perforated
Hole Face Panel Face Panel
Hole Face Panel Face Panel
Nominal Size + 1 14Size + 1 1 1 1
Nominal T-Bar Module
T-Bar -4
Module -4
4
Model: HPL-HA-AL-6M BorderBorder
Model: HPL-HA-AL-6M 6M 6M
T-Bar Module
T-Bar=Module
Nominal Size Size
= Nominal Frame 1 Frame 6 Frame 6M
Nominal Frame 1 Frame
Frame Frame6 6 Frame 6M 6M
Frame
Size C Nominal
Nominal
Size
L W L W L W
11.47mm11.47mm Size CC LL W
W LL WW L L W W
HPL-HA
Transition
Oposed Blade Damper Duct Size - 14 HEPA
W = Overall Width 2.00 L = Overal Length Filter
BackpanBlade Damper HEPA
Oposed
2 3 2.00 Filter
Option: HPL-HA-AL With Optional Remote Operated Opposed Blade Damper 4- Aluminum Backpan & Face
Backpan
Transition 234 Duct Size - 14
HEPA Filter Frame HEPA
Oposed Blade Damper 3
2.00 Filter
HEPA Filter
Damper
Backpan Frame
Control 3 9
Actuator 23
4 Thumb Screw HEPA
Damper Control
Removable Perforated Filter Retainer 9
Actuator Thumb Screw HEPA
Face
HEPA Filter Panel
Frame Filter Retainer 3
Removable Perforated
Damper Control
Face Panel
Damper Control
Actuator
L = Overal Length 9
W = Overall Width Thumb Screw HEPA
Access Hole L = Overal Length
Filter Retainer
Model: HPL-HA-SA Border Damper Control
W = Overall Width1 Removable Model: HPL-HA-SA Border 6
Perforated Model: HPL-HA-SA
Access
Face Hole
Panel
Model: (HPL-HA-SA
Surface Mount
Border) 1 Model: (Standard
HPL-HA-SA Lay-In T-Bar)
Border 6 Model: With Test Port
HPL-HA-SA
DamperSize
Control L = Overal
Size Length
( Surface
WC =Mount ) Opening = Nominal
= Ceiling
Overall Width (Standard Lay-In =T-Bar)
T-Bar Module Nominal With Test Test
PortPort
Access Hole
LAMINAR FLOW DIFFUSERS
Notes:
Notes: (check
(check
1. Available if ifprovided)
Finishes provided)
2. Available Accessories 3. Available Options 4. Construction Details
PRODUCTS
1.
1. Available
Available
Standard Finishes
Finishes
Finish: 2.2.Available
AvailableAccessories
Accessories
CD-AL - Cable 3. Damper
Operated Aluminum Available
3. Options
Available 4. Construction4.Details
Options
HEPA - Filter Construction
Perforated Details
Faces are shipped
CRITICAL
Standard
FaceFinish:
Standard & Outer Frames
Finish: CD-AL
CD-AL--Aluminum Cable Damper
Cable Operated HEPA Filter. HEPA
Aluminum Damper TP - Test Port.
- Filter Perforated Faces are shipped
with 2 safety
Perforated cables.
Faces are shipped
01 White
# 23 Satin Polish Finish. TP Test Port. with 2 safety cables.23%,40% & 51% Perforated Face
Face & Outer Frames TP - Test 1Port. with 2 safety cables.
EI (Externally Insullated 2" foil 23%, 40% & 51% Perforated
Round FaceSizes Available:
Neck
Mill
# 23Finish
Satin Polish Finish. 23%,40% & 51% Perforated Face
back fiberglass Insulation) Round Neck Sizes Available:6, 8, 10, 12 & 14.
Mill Finish Round Neck&Sizes
6, 8, 10, 12 14. Available:
Border 1 (Surface Mount) is Shipped with
6, 8, 10, 12 & 14.
screw holes.
Revision:
Revision: DE Date:03/04/2016
Date: 02/22/2016 Dimensions
Dimensions are in Inches
are in Inches Page: Page:
1 of 1 1 of 1
Revision: E Date: 02/22/2016
Metal
Metal Industries,
Industries, Inc. Inc. Clearwater,
Clearwater, FL 441
FL (727) (727) 441 - 2651Fax (800)
- 2651 Fax (800)
865 8383865 8383 Dimensions are in Inches
www.metalaire.com
www.metalaire.com sales@metalaire.com
sales@metalaire.com Page: 1 of 1
Metal Industries, Inc. Clearwater, FL (727) 441 - 2651 Fax (800) 865 8383 www.metalaire.com sales@metalaire.com
HPL-HA
CE8 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
Submittal: HPL-HA-SS
Laminar Flow Hospital Diffusers - With HEPA Filter
Submittal: HPL-HA-SS
Border
Laminar1 Flow
/ Border 6 / Border
Hospital 6M - With HEPA Filter
Diffusers
Border 1HPL-HA-SS-1
Models: / Border 6 / Border 6M
Stainless Steel Face & Backpan - Surface Mount
Models: HPL-HA-SS-6
HPL-HA-SS-1 Stainless
Stainless Steel
Steel Face
Face &
& Backpan
Backpan -- Standard Lay in T-Bar
Surface Mount
Submittal: HPL-HA-AL
HPL-HA-SS-6M
HPL-HA-SS-6 Stainless Steel Face & Backpan -Metric Sizing
Stainless Steel Face & Backpan - Standard Lay in T-Bar
Laminar Flow Hospital Diffusers
Border 1HPL-HA-SS-6M
/ Border 6 / Border 6M Steel Face & Backpan -Metric Sizing
Stainless
Models: HPL - HA - SS ( Stainless Steel Face & Backpan ) 2.00 HEPA
Duct Size - 41 Filter
Models: HPL-HA-AL-1 Aluminum Face & Backpan - Surface Mount
Backpan
Models: HPL - HA - SS ( Stainless Steel Face & Backpan ) 2.00 Duct Size - 41
HEPA
HPL-HA-AL-6 Aluminum Face & Backpan - Standard Lay in T-Bar Filter
Backpan
HPL-HA-AL-6M Aluminum Face & Backpan - Metric Sizing
HEPA Filter Frame
3
Removable
HEPA Perforated
Filter Frame 9
Model: HPL-HA-AL (Aluminum Backpan & Face)
Face Panel Thumb Screw
HEPA HEPA 3
2.00 Duct Size - 14 Filter
Filter Retainer
Removable Perforated 9
Backpan
Face Panel Thumb Screw HEPA
Filter Retainer
W = Overall Width L = Overal Length
HEPA Filter Frame 3
Options: HPLW- =HA
Overall
- SSWidth
With Optional Remote
Removable Operated Opposed Blade Damper ( Stainless
Perforated Steel
L = Overal Face & Backpan ) 9
Length
Face Panel
Transition
Thumb
Duct - 41 HEPA
SizeScrew
Options: HPL - HA - SS With Optional Remote Operated Opposed Blade Damper ( Stainless
FilterSteel Face & Backpan )
Retainer
HEPA
Oposed Blade Damper Duct Size - 41
Transition 2.00 Filter
W = Overall Width Backpan L = Overal Length
23
HEPA
Oposed Blade Damper
4 2.00 Filter
Option: HPL-HA-AL With Optional Remote Operated Opposed Blade Damper - Aluminum Backpan & Face
Backpan
243
Transition
HEPA Filter Frame Duct Size - 14
3
HEPA
Oposed
DamperBlade Damper
Control 2.00 Filter
9
HEPA Filter Frame
Actuator
Backpan Thumb Screw HEPA 3
23
4
Damper Control
Removable Perforated Filter Retainer
9
Actuator
Face Panel Thumb Screw HEPA
HEPA Filter Frame Filter Retainer
Removable Perforated 3
Damper
Damper Control
Face
Control Panel L = Overal Length
W = Overall Width 9
Access Hole
Actuator Thumb Screw HEPA
Model: HPL-HA-SS Border 1 Damper Control
Removable
Model: HPL-HA-SS Border 6
Perforated L = Overal Length Model:
Filter Retainer HPL-HA-SS
W = Overall Width
( Surface Mount ) Access
FaceHole
Panel (Standard Lay-In T-Bar) With Test Port
Model: HPL-HA-SS Border
C = Ceiling 1
Opening = Nominal Size Model: HPL-HA-SS Border 6
T-Bar Module = Nominal Size Model: HPL-HA-SS Test Port
( Surface L = Overal Length
W =Mount ) (Standard Lay-In T-Bar) With Test Port
Damper Control
Overall Width
ENVIRONMENT
1. Available
Notes:
Notes: Finishes
(check
(check provided)2. Available Accessories
ififprovided) 3. Available Options 4. Construction Details PRODUCTS
Standard Finish: CD-SS - Stainless Steel Cable Damper HEPA - Filter. Perforated Faces are shipped
CRITICAL
1. Available
1. Available Finishes
Finishes 2. Available Accessories
2. Available Accessories 3. Available Options Options
3. Available 4. Construction 4. Details
Construction Details
23 Satin Polish. TP - Test Port. with 2 safety cables.
Standard Finish:
Standard Finish: CD-AL - Aluminum
CD-SS CableSteel
- Stainless Damper HEPA Filter. HEPA - Filter.
Cable Damper Perforated Faces are shipped Faces are shipped
Perforated
23%,
with 2 safety cables.
40% & 51% Perforated Face.
01 White
23 Satin Polish. TP Test Port.TP - Test Port. with 2 safety cables.
EI (Externally Insullated 21" foil Round Neck
23%, 40% & 51% Perforated Sizes Available:
23%, 40%Face& 51% Perforated Face.
back fiberglass Insulation) Round Neck Sizes 6, 8, 10, 12 8,
Available:6, & 10,
14. 12 & 14.
Round Neck Sizes Available:
Border 1 (Surface Mount) is Shipped with
6, 8, 10, 12 & 14.
screw holes.
CE10 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES HPL-HA MODEL NUMBER SPECIFICATION
LAMINAR FLOW DIFFUSER
Model Neck Size Module Available Finishes
HPL-HA-AL-1 Aluminum Surface Mount Standard
HPL-HA-SA-1 Stainless Steel Face/Aluminum Backpan Surface Mount 01 White
HPL-HA-SS-1 Stainless Steel Surface Mount Stainless Steel Units Only
HPL-HA-AL-6 Aluminum T-bar 23 Satin Polish
HPL-HA-SA-6 Stainless Steel Face/Aluminum Backpan T-bar
HPL-HA-SS-6 Stainless Steel T-bar 6 24 x 24 Available Accessories
HPL-HA-AL-6M Aluminum T-bar Metric 7 36 x 24 CD-AL Aluminum Cable Operated Damper
HPL-HA-SA-6M Stainless Steel Face/Aluminum Backpan T-bar Metric 8 48 x 24 CD-SS Stainless Steel Cable Operated Damper
HPL-HA-SS-6M Stainless Steel T-bar Metric 9 HEPA Gasket Type HEPA Filter
10 TP Test Port
12 EI External Insulation
14
CRITICAL
HPL-HA
DEFINITION OF UNITS
Ps Static pressure loss through the diffuser and does not include velocity pressure
ENVIRONMENT
NC Based on Lw re:10-12 watt, includes 10dB room attenuation and a maximum inlet velocity of 500fpm
PRODUCTS
CRITICAL
HEPA filter is a 3" deep filter, with an efficiency of 99.97% on D-3 micron particles
CFM Cubic Feet per Minute (air)
fpm Velocity of air stream in Feet per Minute
HPL-HA
CE12 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES HPL-GS
HPL-GS Laminar Flow Diffuser is engineered to
supply air in critical environments such as clean
rooms, laboratories, hospital operating rooms, and
patient isolation rooms. The diffuser provides a
means of controlling particle contamination within the
room by providing a unidirectional vertical piston
of conditioned air. The HPL-GS utilizes a 3" thick,
pleated filter element, which enables the overall
diffuser housing to be a maximum of 7" high.
Tested in accordance with IEST-RP-CC-034 and Alkermes SOP 110-03147
The standard gel seal HEPA filter is scan tested to meet an efficiency rating of 99.99%
Knife Edge Flange penetrates the HEPA filter (silicone) gel seal to provide a leak proof seal between the filter and the housing
Airtight Filter Housing construction at all joints and corners
Flush Appearance with 1/4" turn fasteners to allow easy removal of perforated face
Thumb Wheel Retainers hold the filter in housing and allow for easy room-side removal of filter
CRITICAL
Inlet Size
6
8
10
12
14
HPL-GS
chains attaching the face assembly to the backpan. ASTM D3395-95 Crosshatch 4B-5B
Core and face assembly shall be removable to allow ASTM D2794-93 Direct Impact 100 in.lb.min.
sanitizing and allow access to the backpan for cleaning. ASTM D2794-93 Reverse Impact 60 in.lb.min
The face shall be flush with the ceiling surface.
The perforated face shall have a 51% free area, a
40% free area or a 23% free area.
Units shall have round inlets. Units shall be designed
to integrate into the specified ceiling system. The units
shall be the size and quantity as outlined in the plans
and specifications.
Optional 3" thick, 99.99% efficient filter on .3 microns.
ENVIRONMENT
PRODUCTS
CRITICAL
HPL-GS
CE14 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES HPL-GS MODEL NUMBER SPECIFICATION
LAMINAR FLOW DIFFUSER
Model Neck Size Module Available Finishes Available Accessories
HPL-GS-AL-1 Aluminum Surface Mount 6 24 x 24 Standard HEPA GS Gel Seal Hepa Filter
HPL-GS-ST-1 Cold Rolled Steel Surface Mount 7 48 x 24 01 White TP Test Port
HPL-GS-SS-1 Stainless Steel Surface Mount 8 Stainless Steel Units Only EI External Insulation
HPL-GS-AL-6 Aluminum T-bar 9 23 Satin Polish D Round disc damper
HPL-GS-ST-6 Cold Rolled Steel T-bar 10
HPL-GS-SS-6 Stainless Steel T-bar 12
HPL-GS-AL-6M Aluminum T-bar Metric 14
HPL-GS-ST-6M Cold Rolled Steel T-bar Metric
HPL-GS-SS-6M Stainless Steel T-bar Metric
CFM Per 23% Free Area 40% Free Area 51% Free Area
CFM Per 23% Free Area 40% Free Area 51% Free Area
Square Foot Ps NC Ps NC Ps NC
40 .300 18 .285 18 .290 18
60 .449 20 .440 20 .423 20
ENVIRONMENT
80 .632 26 .604 26 .595 26
PRODUCTS
100 .792 30 .768 30 .750 30
CRITICAL
PERFORMANCE NOTES FOR SERIES HPL-GS
All data is tested in accordance with ANSI/ASHRAE 70-2006
DEFINITION OF UNITS
Ps Static pressure loss through the diffuser and does not include velocity pressure
NC Based on Lw re: 10-12 watt, includes 10dB room attenuation and a maximum inlet velocity of 500fpm
HEPA filter is a 3" deep filter, with an efficiency of 99.97% on D-3 micron particles
CFM Cubic Feet per Minute (air)
fpm Velocity of air stream in Feet per Minute
HPL-GS
CE16 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES HPL-PR
The HPL-PR is specifically engineered to improve
patient comfort in critical health care applications
such as isolation rooms and trauma centers. The
unique design surrounds the patient with a tent of
conditioned air while minimizing the impact of the air
velocities. The HPL-PR includes a HEPA filter rack.
Face and core assembly is easily removable for cleaning and sterilization
Choice of 23%, 40% and standard 51% free area for the perforated face
Available in all aluminum, stainless steel face/aluminum backpan, or all stainless steel construction
CRITICAL
Standard
1. Finish:
Available Finishes CD
- 3 - CableAccessories
2. Available
T-Bar Module Damper. 24 x 483. 24 x 48
HEPA 49491/8
24- xFilter
24 Available
x 48 48Options 1/4 25 25
1/41/8
47 3/4 4.
23
Perforated
47 3/4
ConstructionFaces
3/4 47 5/82323 are shipped
3/45/8 Details
47 3/4 23 3/4
8 - Cable Damper.
PRODUCTS
Standard
Face Finish:
& Outer Frames # 23 CD HEPA - Filter
TP - Test Port. Perforated
with 2 safetyFaces are shipped
cables.
Standard Finish: T-Bar Module = Nominal Size
CD - Cable Damper. HEPA - Filter Perforated Faces are shipped
CRITICAL
Metal Industries, Inc. Clearwater, FL (727) 441 - 2651 Fax (800) 865 8383 www.metalaire.com sales@metalaire.com
CE18 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
LAMINAR FLOW DIFFUSERS
Frame 1 Frame 6 Frame 6M
Nominal
ENVIRONMENT
Size C L W L W L W PRODUCTS
CRITICAL
24 x 24 24 x 24 25 1/8 25 1/8 23 3/4 23 3/4 23 3/4 23 3/4
24 x 36 24 x 36 37 1/8 25 1/8 35 3/4 23 3/4 35 3/4 23 3/4
24 x 48 24 x 48 49 1/8 25 1/8 47 3/4 23 3/4 47 3/4 23 3/4
HPL-PR
CE20 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES HPL-PR MODEL NUMBER SPECIFICATION
DIRECTIONAL FLOW DIFFUSER
Model Neck Size Module Available Finishes
HPL-PR-AL-1 Aluminum Surface Mount Standard
HPL-PR-SA-1 Stainless Steel Face/Aluminum Backpan Surface Mount 6 01 White
HPL-PR-SS-1 Stainless Steel Surface Mount 7 Stainless Steel Units Only
HPL-PR-AL-6 Aluminum T-bar 8 23 Satin Polish
HPL-PR-SA-6 Stainless Steel Face/Aluminum Backpan T-bar
HPL-PR-SS-6 Stainless Steel T-bar 6 24 x 24 Air Patterns
HPL-PR-AL-6M Aluminum T-bar Metric 7 36 x 24 1W 1-Way
HPL-PR-SA-6M Stainless Steel Face/Aluminum Backpan T-bar Metric 8 48 x 24 2W 2-Way
HPL-PR-SS-6M Stainless Steel T-bar Metric 9 3W 3-Way
10 4W 4-Way
12
14 Available Accessories
CD-AL Aluminum Cable Operated Damper
CD-SS Stainless Steel Cable Operated Damper
ENVIRONMENT
PRODUCTS
CFM per Sq. Ft. 20 30 40 50 60 70 80 90 100
Ps .150 .240 .334 .425 .523 .625 .730 .820 - CRITICAL
NC <24 <24 29 32 35 39 42 45 -
Throw 1-1-3 1-1-4 1-2-6 1-3-8 2-4-10 2-5-11 3-6-13 5-8-16 -
DEFINITION OF UNITS
Ps Static pressure loss through the diffuser and does not include velocity pressure
HPL-PR
NC Based on Lw re: 10-12 watt, includes 10dB room attenuation and a maximum inlet velocity of 500fpm
HEPA filter is a 3" deep filter, with an efficiency of 99.97% on D-3 micron particles
large volumes of air in confined spaces with maximum comfort and low
room air velocities. The HRD-CL is an excellent choice for clean rooms
and laboratories. PAGE 23
Model HRD-HA radial flow diffusers have many of the same features as the
HRD-CL and are designed with a HEPA filter rack accessible from the face of
the diffuser. The gasket type HEPA filter is optional. PAGE 30
CE22 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES HRD-CL
HRD-CL radial discharge pattern diffusers are engineered
for supply air distribution in critical environments such
as chemistry labs and clean rooms. The diffusers are
engineered to supply a low velocity of conditioned air in a
radial pattern from the ceiling.
Low velocity radial air pattern
Available in 90 or 180 throw
Choice of all aluminum, stainless steel face and aluminum backpan, or all stainless steel construction
L = Overall Length
Note: Damper Adjustment Thru 21" Hole In Face Plate Without Removing Face.
Model: HRD-CL-AL Border 1 ( Surface Mount ) Model: HRD-CL-AL Border 6 (Standard Lay-In T-Bar)
ENVIRONMENT
3/8 T-Bar Spacing
( 9.525 ) PRODUCTS
CRITICAL
Nominal Size + 1 41 ( 31.75 )
Model: HRD-CL-AL
Border 6M (1 1/2 Inch Lay-In T-Bar) Frame 1 Frame 6 Frame 6M
Nominal
Size L W
C Frame
L 1 W L Frame
W 6 in mm in
Frame
mm
6M
4 [101.6]
24 x 24 24 x 24 25 1/4 25 1/4 23 3/4 23 3/4 23 5/8 600.075 L23.63 600.075 W
Perforated Nominal
Face Size24 x 48 C24 x 48 49 1/4 25 1/4 47 3/4 23 3/4 47 5/8 1209.675
L W L W in 23.63
mm 600.075
in mm
12 x 48 12 x 48 49 1/4 12 1/4 47 3/4 11 3/4 47 5/8 1209.675 11.63 295.275
24 x 24 24 x 24 25 1/4 25 1/4 23 3/4 23 3/4 23 5/8 600.075 23.63 600.075
3/8 NOTE: Units Are Provided With Zinc Coated Non Painted
( 9.525 ) 48 x 24 48 xTurn
Quarter 24 Fastners.
49 1/4 25 1/4 47 3/4 23 3/4 47 5/8 1209.675 23.63 600.075
T-Bar Module - 3/8 ( 9.525 )
48 x 12 48 x12"x48"
NOTE: 12 49is1/4 12 1/4 with
only available 47 3/4
a One11Way
3/4 Pattern
47 5/8 1209.675 11.63 295.275
HRD-CL
T-Bar Module
C = Ceiling Opening
Duct Size
- 41
Back Pan
2
3
W = Overall Width 8 Removable Perforated Face Panel
L = Overall Length
Model: HRD-CL-SA Border 1 ( Surface Mount ) Model: HRD-CL-SA Border 6 (Standard Lay-In T-Bar)
4 4
3 3
8 8
RADIAL FLOW DIFFUSERS
1 Outside 1 Outside
Nominal Size + 1 4 T-Bar Module - 4 Perforated Face
Perforated Face
T-Bar Module
CE24 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
Models: HPL-CL-SS ( Stainless Steel Backpan & Face )
Duct Size - 41
Back Pan
2
Model: HPL-CL-SS Border 1 ( Surface Mount ) Model: HPL-CL-SS Border 6 (Standard Lay-In T-Bar)
4 4
48 x24
24 x 4848 x 24 49 1/449 1/42525
24 x 48 1/41/4 47
47 3/4
3/4 23 23
3/43/447 5/8
47 5/8
23 5/8 23 5/8
Removable Perforated 48 x 48
12 x 1248 x 12 49 1/449 1/41313
48 x 12 1/41/4 47
47 3/4
3/4 11 11
3/43/447 5/8
47 5/8
11 5/8 11 5/8
1 Face Panel
2 24 x24
12 x 1224 x 12 25 1/425 1/41313
24 x 12 1/41/4 23
23 3/4 11 11
3/43/423 5/8
23 5/8
11 5/8 11 5/8
T-Bar Module - 38
ENVIRONMENT
PRODUCTS
CRITICAL
HRD-CL
CE26 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES HRD-CL MODEL NUMBER SPECIFICATION
RADIAL FLOW DIFFUSER
Model Neck Size Module Available Finishes
HRD-CL-AL-1 Aluminum Surface Mount 24 x 12 Standard
HRD-CL-SA-1 Stainless Steel Face/Aluminum Backpan Surface Mount 6 36 x 12 01 White
HRD-CL-SS-1 Stainless Steel Surface Mount 7 48 x 12 Stainless Steel Units Only
HRD-CL-AL-6 Aluminum T-bar 8 23 Satin Polish
HRD-CL-SA-6 Stainless Steel Face/Aluminum Backpan T-bar
HRD-CL-SS-6 Stainless Steel T-bar 6 24 x 24 Available Accessories
HRD-CL-AL-6M Aluminum T-bar Metric 7 36 x 24 D3 Aluminum Radial Opposed Blade Damper
HRD-CL-SA-6M Stainless Steel Face/Aluminum Backpan T-bar Metric 8 48 x 24 BDSS Stainless Steel Butterfly Damper
HRD-CL-SS-6M Stainless Steel T-bar Metric 9 EI External Insulation
10
12
14
CRITICAL
HRD-CL
CE28 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES HRD-CL PERFORMANCE
HRD-CL 2-WAY PATTERN
Module 2-Way Pattern Horizontal Spread (feet) Vertical Throw (feet)
Size
10 Deg dT 10 Deg dT 15 Deg dT 20 Deg dT
and
Inlet Size CFM Ps Pt NC 100 75 50 100 75 50 100 75 50 100 75 50
150 .019 .030 <15 0 1 3 0 1 2 0 1 2 0 1 4
200 .033 .054 15 1 1 4 0 1 3 0 1 4 1 2 5
250 .052 .084 19 1 2 5 1 2 4 1 2 5 1 3 6
24 x 24
8
ENVIRONMENT
PRODUCTS
All data is tested in accordance with ANSI/ASHRAE 70-2006.
CRITICAL
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Pv Velocity pressure (inches of water column)
Pt Total pressure (inches of water column)
Ps Static pressure = PtPv (inches of water column)
Throw Non-isothermal horizontal throw (supply air temperature 15F colder than average room temperature);
values are for 150, 100 and 50fpm velocities
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
HRD-CL
Available in all aluminum, stainless steel face/aluminum backpan or all stainless steel
Duct Size - 1
I 1
e- ---- +-1
I-
Back Pan [ 2
Back Pan [
I I
________________________j________________________________________________________
________________________ j________________________________________________________
!
l
--,---------,-------- ---------,I---------,I-- -r--------,----------,---------1 ---------T---------r---------r---------,- ---------,-
l
1 I
I I
--,---------,--------
I
1
I
I
---------,II I---------,II I-- ! ! ]
_J
! ! .l
! ! ! 9
-r--------,----------,---------1 ---------T---------r---------r---------,- ---------,-
L
LII LI
I ----- LII ----P II ! -=-=-=--=-=--'
-=-
! =-=--=-=-= --=-=--=-=-=--=-...1
] !-=-=-=-=--=-=- !-=--=-=--=-=-=--= L--=-=-=-=--=-L=-=--=-=-=-=-=-
! ! ! -=-=--=-=-=-=-=-- ! 9
L L ----- L ----P J1 -=-=-=--=-=--'
I _J
li---------------------------------------------------Jl
.l L
-=-=-=--=-=-= --=-=--=-=-=--=-...1-=-=-=-=--=-=- -=--=-=--=-=-=--= L--=-=-=-=--=-L=-=--=-=-=-=-=- -=-=--=-=-=-=-=--
I
J1 I
li---------------------------------------------------Jl
I
II.. II
Removable Perforated Face Panel _/
W = Overall Width ----. Removable Perforated Face Panel _/
W = Overall Width ----. -----------
I
L = Overall Length ----------
.'
-----------
I
L = Overall Length ----------
.'
lJ:
lJ:
Model: HRD-HA-AL Border 1 ( Surface Mount ) Model: HRD-HA-AL Border 6 (Standard Lay-In T-Bar)
Model: HRD-HA-AL Border 1 ( Surface Mount ) Model: HRD-HA-AL Border 6 (Standard Lay-In T-Bar) 0
c::
0
C = Ceiling Opening = Module Size J:
c::
C = Ceiling Opening = Module Size J:
Q)
.c
EQ)
ENVIRONMENT
.c
zE
::::J
9
tt
PRODUCTS
z
::::J
Perforated Face Perforated Face
tt tt
CRITICAL
9
Perforated Face Perforated Face
Nominal Size + 1 l
Nominal Size + 1 l
Model: HRD-HA-AL Border 6M (T-bar Lay-in Metric Sizing)
Model: HRD-HA-AL Border 6M (T-bar Lay-in Metric Sizing)
Nominal Frame 1 Frame 6 Frame 6M
Size
Nominal Frame 1 Frame 6 Frame 6M
C L w L w L w
Size FrameC 1 L w Frame
L 6 w L Framew
6M
Nominal 24 X 24 24x24 25 1/4 25 1/4 23 3/4 23 3/4 23 3/4 23 3/4
9
Perforated Face Size C 24x24 25 1/4 25 1/4 23 3/4 23 3/4 23 3/4 23 3/4W
L W L W L
tt
24 X 24
9 24x48 24x48 49 1/4 25 1/4 47 3/4 23 3/4 47 3/4 23 3/4
HRD-HA
Perforated Face
24 x 24 24 x 24
24x48 25 1/4
24x48 25
491/4
1/4 2523
1/43/447 3/423 23
3/43/4 47
23 3/4
3/4 23 23
3/43/4
NOTE: Units Are Provided With Zinc Coated Non Painted
24 x 48 24 x 48 49 1/4 25 1/4 47 3/4 23 3/4 47 3/4 23 3/4
NOTE: Quarter
Units AreTurn Fastners.
Provided With Zinc Coated Non Painted
Quarter Turn Fastners.
CE30 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
RADIAL FLOW DIFFUSERS
Frame 1 Frame 6 Frame 6M
Nominal
Size C L W L W L W
24 x 24 24 x 24 25 1/4 25 1/4 23 3/4 23 3/4 23 3/4 23 3/4
ENVIRONMENT
PRODUCTS
24 x 48 24 x 48 49 1/4 25 1/4 47 3/4 23 3/4 47 3/4 23 3/4
CRITICAL
HRD-HA
CE32 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES HRD-HA SPECIFICATIONS
RADIAL FLOW DIFFUSER WITH FILTER Performance Specification
RACK ALUMINUM/STAINLESS STEEL The manufacturer shall provide published performance
MODEL HRD-HA-AL / HRD-HA-SA / data. Data has been tested in accordance to ANSI/
HRD-HA-SS
ASHRAE Standard 70-2006.
Air outlets shall be model HRD-HA-AL (aluminum),
HRD-HA-SA (stainless steel face/aluminum backpan) or Paint Specification
HRD-HA-SS (stainless steel) manufactured by METALAIRE. METALAIRE 01 paint finish is an anodic electro-
Diffuser shall generate a low velocity, vertical piston of deposition Melamine cross linking thermo set acrylic
discharge air. Unit shall also include an integral filter enamel finish, conforming to no less than 9 specific
section to allow for installation of a gasket type HEPA ASTM testing requirements covering a full range of
filter. Unit shall accept 3" pleated filter held in place physical properties. The 01 finish has been tested to
using a trapeze hanger system. exceed ASTM D4752 Double MFK minimum 100 rubs.
Diffuser shall be constructed of a one-piece perforated This test demonstrates METALAIRE products ability to
face and core assembly that is removable from the withstand continuous cleaning with harsh cleaners and
backpan with 1/4" turn fasteners accessible from the disinfectants. Following are the ASTM specifications for
face. Face and core assembly mounted with internal physical properties.
spring clips or other mechanical fastening devices are
ASTM D523-89 Gloss 60 Degree 70-80
not acceptable. Units shall include stainless steel safety
ASTM D3363-92A Pencil Hardness HB-H
chains attaching the face assembly to the backpan.
ENVIRONMENT
PRODUCTS
CRITICAL
HRD-HA
CE34 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES HRD-HA PERFORMANCE DATA
HRD-HA 1-WAY PATTERN WITHOUT HEPA FILTER
Module 1-Way Pattern Horizontal Spread (feet) Vertical Throw (feet)
Size
10 Deg dT 10 Deg dT 15 Deg dT 20 Deg dT
and
Inlet Size CFM Ps Pt NC 100 75 50 100 75 50 100 75 50 100 75 50
150 .019 .030 <15 0 1 3 0 1 2 0 1 2 0 1 4
200 .033 .054 <15 0 1 2 0 1 2 0 1 2 0 1 3
250 .052 .084 18 1 2 5 1 2 4 1 2 5 1 3 6
24 x 24
8
ENVIRONMENT
PRODUCTS
CRITICAL
HRD-HA
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Pv Velocity pressure (inches of water column)
Pt Total pressure (inches of water column)
Ps Static pressure = PtPv (inches of water column)
Throw Non-isothermal horizontal throw (supply air temperature 15F colder than average room temperature);
values are for 150, 100 and 50fpm velocities
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
HRD-HA
CE36 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES HRD-GS
HRD-GS radial discharge pattern diffuser includes a gel
seal HEPA filter rack and is engineered for supply air
distribution in critical environments such as chemistry labs
and clean rooms. The diffusers are engineered to supply
a low velocity of conditioned air in a radial pattern from
the ceiling
Low velocity radial air pattern
Available in 90 or 180 throw
Choice of all aluminum, all cold-rolled steel or all stainless steel construction
CRITICAL
Inlet Size
6
8
10
12
14
Nominal
Size C L W L W L W L W
24 x 24 24 x 24 25 1/4 25 1/4 23 3/4 23 3/4 23 5/8 23 5/8 20 1/8 20 1/8
24 x 48 24 x 48 49 1/4 25 1/4 47 3/4 23 3/4 47 5/8 23 5/8 20 1/8 44 1/8
chains attaching the face assembly to the backpan. ASTM D3395-95 Crosshatch 4B-5B
Core and face assembly shall be removable to allow ASTM D2794-93 Direct Impact 100 in.lb.min.
sanitizing and allow access to the backpan for cleaning. ASTM D2794-93 Reverse Impact 60 in.lb.min
The face shall be flush with the ceiling surface.
The perforated face shall have a standard 23% free area
with optional 40% free area or 51% free area.
Units shall have round inlets. Units shall be designed
to integrate into the specified ceiling system. The units
shall be the size and quantity as outlined in the plans
and specifications.
Optional 3" thick, 99.99% efficient filter on .30 microns.
ENVIRONMENT
PRODUCTS
CRITICAL
HRD-GS
CE38 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES HRD-GS MODEL NUMBER SPECIFICATION
RADIAL FLOW DIFFUSER
Model Neck Size Module Available Finishes
HRD-GS-AL-1 Aluminum Surface Mount 6 Standard
HRD-GS-ST-1 Cold Rolled Steel Surface Mount 7 01 White
HRD-GS-SS-1 Stainless Steel Surface Mount 8 Stainless Steel Units Only
24 x 24
HRD-GS-AL-6 Aluminum T-bar 9 23 Satin Polish
48 x 24
HRD-GS-ST-6 Cold Rolled Steel T-bar 10
HRD-GS-SS-6 Stainless Steel T-bar 12 Available Accessories
HRD-GS-AL-6M Aluminum T-bar Metric 14 HEPA GS Gel Seal Hepa Filter
HRD-GS-ST-6M Cold Rolled Steel T-bar Metric TP Test Port
HRD-GS-SS-6M Stainless Steel T-bar Metric EI External Insulation
D Round disc damper
ENVIRONMENT
500 .212 .340 39 2 4 5 6 7 8 PRODUCTS
CRITICAL
250 .023 .036 <15 1 1.5 2 0 3.5 5
48 x 24 500 .087 .139 29 1 1.5 2.5 5 7 10
700 .145 .248 38 1 1.5 2.5 6 8 10
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Pv Velocity pressure (inches of water column)
HRD-GS
includes all of the air devices mounted in the operating room ceiling. PAGE 41
OPERATING
ENVIRONMENT
PRODUCTS
CRITICAL
CE40 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
PERIFLOW SYSTEM
The Periflow Operating Room System provides control
over particulate matter within the operating room
environment. This system provides the highest standard
of air cleanliness for patients undergoing minor procedures
to major surgeries.
Custom Design each system is custom designed and precisely fabricated
to accommodate the specialized mechanical needs of todays operating room
environments
Compact Design by its compact yet efficient design, the Periflow system allows
the designer the flexibility to properly provide for all the various components
competing for space above the operating room ceiling
Self-balancing the unique loop system design is self-balancing and eliminates the
need to re-calibrate after the system is set up, thus reducing startup costs
Available in all aluminum, stainless steel face and aluminum backpan and all stainless steel construction
Tested in accordance with the guidelines set forth by the Committee on Operating Room Environments
of the American College of Surgeons as published in the January, 1976 Bulletin, and meets Class 1
Microbiological Air Cleanliness guidelines
ROOM SYSTEM
OPERATING
ENVIRONMENT
PRODUCTS
CRITICAL
PERIFLOW
Center Diffusers
Nominal Overall Foot
Plenum Size Print Over All System CFM Range
Model A B C D E F Qty Size Minimum Maximum
84 96 48 60 24 1 60 x 24 900 1620
ENVIRONMENT
CE42 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
CRITICAL
OPERATING
ENVIRONMENT PERIFLOW
ROOM SYSTEM
PRODUCTS
CE43
2016 Metal Industries, Inc.
PERIFLOW SYSTEM SPECIFICATIONS
HOSPITAL OPERATING ROOM AIR All systems shall have been tested in accordance with
DISTRIBUTION SYSTEM ALUMINUM, the Recommended Procedure for the Determination of
STAINLESS STEEL, MODEL PERIFLOW
Microbiological Air Cleanliness, as published by the
Air outlets shall be model Periflow manufactured by Committee on Operating Room Environments of the
METALAIRE. The air distribution and particle control for American College of Surgeons (January, 1976 Bulletin)
the operation room shall consist of a non-aspirating by an independent Microbiological Testing Laboratory.
center diffuser providing air supply over the operating The proposed system shall have met the requirements for
table. The air velocity from the center diffuser shall not Class 1 Microbiological Air Cleanliness as set forth in this
exceed 40 fpm at operating table height. An air curtain procedure. Copies of the Independent Laboratorys test
shall be provided from fixed, nonadjustable multiple slot report shall be provided to the engineer for prior approval.
panels surrounding the operating table. The air curtain The manufacturer shall submit a listing of 25 or more
shall not exceed 60 fpm and shall project air outward at systems of the setup as shown.
not less than a 5% angle, but no more than a 15%angle,
from the operating table. Systems that do not contain an Performance Specification
air curtain as an inherent part of their design shall not The manufacturer shall provide published performance
be acceptable. data. Data has been tested in accordance to ANSI/
All components of the system shall be of all aluminum, ASHRAE Standard 70-2006.
stainless steel face and aluminum backpan or all
stainless steel construction. Paint Specification
METALAIRE 01 paint finish is an anodic electro-
Aluminum factory supplied plenums, center and
deposition Melamine cross linking thermo set acrylic
perimeter panels shall be aluminum construction. All
ROOM SYSTEM
All exposed surfaces shall be supplied with a #23 satin ASTM D3395-95 Crosshatch 4B-5B
polish. A painted or coated finish is not recommended. ASTM D2794-93 Direct Impact 100 in.lb.min.
ENVIRONMENT
Each center diffuser shall be provided with a single inlet ASTM D2794-93 Reverse Impact 60 in.lb.min.
PRODUCTS
CRITICAL
and the perimeter plenum system shall be supplied ASTM B177-100 Salt Spray 100 hours
with two connections. Systems utilizing more than ASTM D1735-92 Humidity 500 hours
two connections to the perimeter plenum shall not ASTM D870-92 Water Soak 250 hours
be acceptable.
ASTM D4752 Double MEK rubs 100
A perforated baffle supplied by the system manufacturer
shall be permanently attached to both the center and
perimeter panels to provide equal air distribution over the
diffuser face. Both center diffuser faces and perimeter
panel faces shall be retained by 1/4 turn fasteners for ease
PERIFLOW
CE44 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
PERIFLOW SYSTEM PERFORMANCE DATA
CENTER PANEL
CFM per sq. ft. 10 20 30 40 50 60 70 80
Ps 0.06 0.13 0.21 0.30 0.40 0.48 0.58 0.69
NC < 20 < 20 23 26 32 34 39 42
Velocity at 6-ft
20 35 50 65 70 80 90 100
(single panel)
Velocity at 6-ft
20 35 50 70 80 90 100 110
(multi-panels 1)
Velocity at 6-ft
25 40 60 80 100 110 120 130
(multi-panels 2)
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
Ps Static pressure = PtPv (inches of water column)
Throw vertical throw at a 50 fpm terminal velocity and temperature differential of 15
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
maximum inlet velocity of 500 fpm. NC based on center panel area of 4 square feet.
To calculate NC for other panel areas, add the result of the following equation to the
NC value from table above: NC adjustment = 10 x Log (multi-panel area / 4)
ROOM SYSTEM
Multi-panels 1 - Average velocity at 6 feet for adjacent panels totaling 15 to 30 square feet
OPERATING
Multi-panels 2 - Average velocity at 6 feet for adjacent panels totaling more than 30 square feet
ENVIRONMENT
PRODUCTS
All data is tested in accordance with ANSI/ASHRAE 70-2006.