100%(1)100% fanden dieses Dokument nützlich (1 Abstimmung)
2K Ansichten8 Seiten
The document contains a questionnaire for power transformers with 59 questions seeking technical details and specifications. It requests information on:
1. Manufacturer name and transformer ratings, cooling type, and overload capacity.
2. Transformer ratios, voltage connections, tap changer type and range.
3. Core construction, temperature rises and limits, no load and load losses.
4. Efficiency at various loads, impedance, regulation, insulation levels and test voltages.
5. Weights, dimensions, fittings and other general details.
It seeks to collect comprehensive technical information about transformers for procurement purposes.
The document contains a questionnaire for power transformers with 59 questions seeking technical details and specifications. It requests information on:
1. Manufacturer name and transformer ratings, cooling type, and overload capacity.
2. Transformer ratios, voltage connections, tap changer type and range.
3. Core construction, temperature rises and limits, no load and load losses.
4. Efficiency at various loads, impedance, regulation, insulation levels and test voltages.
5. Weights, dimensions, fittings and other general details.
It seeks to collect comprehensive technical information about transformers for procurement purposes.
The document contains a questionnaire for power transformers with 59 questions seeking technical details and specifications. It requests information on:
1. Manufacturer name and transformer ratings, cooling type, and overload capacity.
2. Transformer ratios, voltage connections, tap changer type and range.
3. Core construction, temperature rises and limits, no load and load losses.
4. Efficiency at various loads, impedance, regulation, insulation levels and test voltages.
5. Weights, dimensions, fittings and other general details.
It seeks to collect comprehensive technical information about transformers for procurement purposes.
GUARANTEED TECHNICAL PARTICULARS AND DETAILS FOR POWER TRANSFORMERS
Sr. Particulars/Details required to be
No given by the tenderer 1. Name of the Manufacturer 2. Normal full load three phase output with temperature rise as specified in the Specification. H.V. Winding (KVA) L.V. Winding (KVA) 3. Continuous three phase output under site conditions as specified in the Specification (after supplying derating factor, if any) H.V. Winding (KVA) L.V. Winding (KVA) 4. Type of cooling and corresponding normal full load output H.V. Winding (KVA) L.V. Winding (KVA) 5. Overload capacity (for 2 hrs) starting from full load and with temperature as specified in the Specification (KVA) 6. Normal ratio of transformation 7. Connections : (including vector group reference No. & symbol a) High voltage winding b) Low voltage winding 8. Type of Tap changer 9. Tappings a) Number b) Range c) Location
10. Type of core construction
ii) Temperature rise in oil by thermometer. iii) Hot spot temperature over Specified ambient temperature (Deg.C.) 12. Limit for hot spot temperature for which the transformer is designed (Deg. C) 13. i) Guaranteed no load loss at normal ratio, rated frequency at 75 Deg. C average winding temperature KW. ii) Tolerance, if any applicable to above 14. i) Guaranteed total losses at normal ratio, rated output rated voltage dated frequency at 75 Deg. C average including auxiliary losses at rated output-KW ii) Tolerance, if any applicable to above 15. Auxiliary losses at rated putout included in 14(i) above. 15. Total losses at normal ratio, rated (A) output, rated voltage, rated frequency and maximum attainable temperature at site including auxiliary losses KW. 16 Earthing current and power factor (L.V. side) i) At normal voltage and frequency. ii) At maximum voltage and normal, frequency (110%) 17. Efficiency at 75% unity P.F. i) on 100% load (%) ii) on 75% load (%) iii) on 50% load (%) iv) on 25% load (%) 18. Efficiency at 75 Deg. C. 0.8. p.f., (Lag) i) on 100% load (%) ii) on 75% load (%) iii) on 50% load (%) iv) on 25% load (%) 19. Load at which maximum efficiency occurs (% of full load) 20. Maximum efficiency (%) 21. a) Percentage reactance at rated current and frequency (%) b) Percentage impedance at rated current and frequency at 75% i. Positive sequence (%) ii. Zero sequence (%) c) Range of variation +/- offered in items of clause 1.17 d) Tolerance, applicable if any. 22. Impedance voltage drop at normal ratio at 75 Deg. C expressed voltage on full load (%) 23. Regulation on full load at unity p.f. at 75 Deg.C expressed as a percentage of normal voltage (%) 24. Regulation on full load at 0-8 p.f. lagging at 750 C expressed as a percentage of normal voltage (%). 25. Maximum current density in the winding:- i) H.V. (Amps/Sq.cm.) ii) L.V. (Amps/Sq.cm.) 26. Minimum flux density in the core (Lines/Sq.c.m.) 27. Core joints (butt or interleaved) 28. Type of winding i) H.V. ii) L.V. 29. Type of radial supports i) H.V. winding ii) L.V. winding 30. Insulation of higher voltage winding 31. Insulation of lower voltage winding 32 Insulation of core bolts 33. Insulation of core bolts washers 34. Insulation of core and plates 35. Insulation of core Laminations 36. Thickness of transformer tank plates i) Sides (mm) ii) Bottom (mm) iii) Cover (mm) iv) Tube radiators (mm) 37. Test Voltages A. Power frequency High voltage Test i) Test voltage for l min with stand test on line end of high voltage winding (KVRMS) ii) Test voltage for l1 min, withstand test on neutral end of the high voltage winding (KVRMS)
iii) Test voltage or 1 min. withstand
test on both line and neutral ends of low voltage winding (KVRMS) B. Impulse Tests: i) Test voltage for 1.2/50 micro second full wave withstand test on huge voltage winding ( KV crest) ii) Test voltage for 1.2/50 micro second full wave withstand test on high voltage winding(KV crest) 38. Inter-turn Insulation i) Extent of end turns reinforcement (%) ii) Extent of reinforcement of turns adjacent to tapings (%) iii) Test voltage for 1 min. 50 HZ inter-turn insulation test on (i) (above) (KV RMS) iv) Test voltage for 1 min. 50 HZ. Inter-turn insulation test on (ii) above(KV RMS) v) Test voltage for 1 min. 50 HZ. Inter-turn insulation test on main body of the winding (KV RMS) 39. Type of winding temperature indication. 40. Maximum continuous ratings i) at 50C ambient air temp. at site (KVA) ii) at 40C ambient air temp. at site (KVA) iii) at 30C ambient air temperature at site (KVA) iv) at 25C ambient air temp. at site (KVA) 41. Power taken by heater in conservator tank in watts at 240 volts single phase or at 400 volts, three phase. 42. Width of track gauge (meters) 43. Bushing Particulars i) Type of high voltage bushing and creepage distance in mm. ii) Weight of high voltage bushing in kgs. iii) Quantity of oil in one high voltage bushing insulator in liters iv) Dry 1 min. power frequency withstand test voltage value of high voltage bushing in KV. v) Wet 10 second power frequency test voltage value of high voltage bushing in KV vi) Impulse withstand test voltage value with 1.2/50 micro second full wave of high voltage bushing in KV vii)Type of low voltage bushing and creepage distance in mm.
viii) Weight of low voltage bushing
insulator in Kgs. ix) Quantity of oil in one low voltage bushing insulator in liters. x)Dry 1 min-power frequency withstand test voltage value of low voltage bushing in KV xi) Wet 10 second power frequency withstand test voltage value of low voltage bushing in KV xii) Impulse withstands test voltage value with 1.2/50 micro second full wave of low voltage bushing in KV. Xiii) Whether the bushing are hermetically sealed or not. 44. Clearances a) Minimum clearances between phases (mm) i) In oil ii) Out of oil b) Minimum clearances high voltage to earth in oil (mm) c) Minimum clearance high voltage to tank in oil (mm) 45. Net weight of the core (Kgs.) 46. Net weight of copper:- a) HV (Kgs) b) LV (Kgs) c) Total (Kgs) 47. Weight of core and windings(Kgs) 48. Weight of fittings and parts detached for transport (Kgs.) 49. Net un tanking weight (Kgs) 50. Weight of tank and cover (Kgs) 51. Weight of tank and cover (Kgs) 52. Weight of oil in transformer (including bushings) (Kgs) 53. Weight of complete transformer with all fittings and oil (Kgs.) 54. Weight of complete transformer with all fittings but without oil (Kgs.) 55 Weight of the heaviest shipment package (Kgs)l and dimensions 56. Dimensions of the transform
i) Maximum height to top of bushings
(mm) ii) Overall length (mm) iii) Overall width (mm) 57. Minimum clear height for lifting core and winding from tank in meters. 58. Details of on load tap changing gear : a) Make b) Type c) Rating i) Rated voltage ii) Rated current iii) Step voltage iv) No. of steps d) Time for complete tap change e) Diverter selector switch transition time (cycles) f) Control g) Auxiliary supply details h) Voltage control i) Line drop compensation j) Protection devices k) Value of maximum short circuit l) Maximum impulse withstand test voltage value with 1.2/50 micro second full wave between switch and ground m) Maximum impulse withstand test voltage with 1.250Micro second full wave between the remote terminal and ground with the selector terminal at one end of the range. n) Maximum power frequency test voltage between switch assembly and ground. o) Maximum impulse withstand test voltage with 1.2/50 micro second test across the tapping range. p) Maximum temperature of the tap changer which must not be exceeded during operation q) Approximate overall weight (Kgs) r) Approximate overall dimensions s) Approximate overall quantity of oil (Kgs.) t) Nos of operations after which change of oil is necessary. 59. Any other particulars which need a mention. 60. Technical particulars of Bushing type/turret mounted current Transformers. a) Rated Primary Current. b) Rated Secondary Current. c) Rated Output. d) Class of Accuracy. e) Max. knee point voltage