Beruflich Dokumente
Kultur Dokumente
STRONGER
T H A N S T E E L.
SM
Need help with product selection, ordering, scheduling, delivery, or anything else?
Call us at 800-543-7140, or on the West Coast at 800-365-5284.
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
3
Overview 1-8
Engineering Services 4
Clip Express 4
Contact Information & Locations 5
How To Use This Catalog 6-7
LEED and Sustainability 8
Interior Framing 9-33
Drywall Framing 10-14
Sound Rated Systems 15-18
Head-of-Wall Deflection Systems 19-20
Door and Window Framing 21-22
Bridging, Bracing and Backing 23-27
Shaftwall 28-29
Area Separation Wall 30-31
Fire Stop Tracks 32-33
Exterior Framing 34-47
Curtain Wall Framing 35-37
Door and Window Framing 38-40
Head-of-Wall Deflection Systems 41-43
Bridging and Bracing 44-46
Load-Bearing 47
Floor Framing 48-53
Interior Finishing 54-68
TABLE OF CONTENTS Paper-Faced Beads and Trims 55-57
Metal Beads and Trims 58-62
Vinyl Beads and Trims 63-68
Metal Lath and Accessories 69-84
Metal Lath 70-73
Corner and Casing Beads 74-75
Control and Expansion Joints 76-77
Weep and Sill Screeds 78-79
Veneer Plaster Beads and Trims 80-81
Vinyl Corner and Casing Beads 82
Vinyl Expansion Control Joints 83
Vinyl Weep and Sill Screeds 84
Clips and Connectors 85-102
Curtain Wall and Bypass Connections 86-87
Head-of-Wall Deflection Connections 88
Rigid Connections 89-92
Bridging, Bracing and Backing 93-95
Gusset Plates 96
Floor Joist Framing Connections 97-98
Roof and Truss Connections 99-100
Specialty Clips and Connectors 101-102
Index 103-105
Trademarks and Warranty 106
Code Approvals 107
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
4 OVERVIEW
Smarter engineering and technical expertise. Connections you can count on.
Its support that extends beyond the structure itself.
We know that having the right products, at the right
From the initial design phase to jobsite installation, we time, and at the right price, is absolutely essential to
are all about providing inventive, yet practical and hands- getting the job done. ClarkDietrich Clip Express is your
on know-how to help you think outside the boxor to single source for the widest and most cost-effective
help you just get it done. array of rigid, deflection, bridging and general-purpose
clips, connectors, supports and framing hardware for
ClarkDietrich Engineering Services is a full-service commercial and residential light-gauge steel framing.
consulting firm that believes strongly in value
engineering and customer input. Our engineering fees With Clip Express, you get fully engineered, rigorously
and lead times are competitive, and our customer service tested and precision-formed connectors each and
exceeds the industry standard with consistent point-of- every time. Many of our connectors were developed
contact through our regional project managers. by, or in conjunction with, framing installers in order
to deliver high-performance products for significant
We offer Building Information Modeling (BIM) services installed savings.
that include specialty engineering collaborative design.
We support the BIM movement by offering add-on tools While you may find a cheaper price than ClarkDietrich,
that allow our products, and the rich data attached to you wont find a lower overall cost or better value. We
them, to quickly be imported into digital designs. Our offer unmatched reach through numerous plants and
team is also comprised of LEED-certified professionals engineering officesand nationwide product availability.
to consult on sustainable building design.
Electronically sealed shop drawings and calculations
And because staying on schedule is crucial, we ship
Preliminary sizing and pre-bid engineering pricing most orders the same day they are received. Well get it
Reference plan on large projects there when, how and where you need it. Our nationwide
Detailed wall sections, full elevation opening manufacturing and service facilities see to that.
design and C-stud truss design
Industrys widest product selection available from one source
Our technical services team provides immediate Fast delivery options meet your deadlines
response to questions ranging from general installation Backed by the largest light-gauge framing and
engineering company in the world
to detailed specification requirements, and can deliver
Expert field representatives for comprehensive
one-day turnaround on technical sizing. We are experts product, installation and sales training
on industry standards such as AISI and ASTM, and a
proud member of SFIA. Our team also supports our
online product submittal system, SubmittalPro, and
our design/engineering software is available as a free
Throughout this catalog, when you see this icon next
download from www.clarkdietrich.com.
to a product entry, you know the product is part of our
Product support and typical member sizing Clip Express program.
Framing detail recommendations
Compliance and industry standards, such as AISI, ASTM and SFIA
Engineering software and product submittal support
LEED requirements support
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
OVERVIEW 5
OVERVIEW
will be delivered on time, and that you can call on us for
support any and every step of the way.
HAWAII Kapolei FLORIDA Miami
P 951.360.3500 Vinyl Corp.
F 951.360.3333 P 305.477.6464
F 305.477.4108
ILLINOIS Rochelle
P 800.659.0745
F 513.645.0750
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
6 OVERVIEW
This catalog is designed to help you select the right Y IELD S TRENG TH (F Y/P SI OR KSI)
products or systems for your construction applications. ClarkDietrich products are manufactured with steel having
Divided into six major sections, it is the most a yield point of 33ksi for 18 and 20 gauge material. A yield
comprehensive manual in the industry. point of 50ksi is standard for 16 gauge and heavier material.
KSI = kips/square inch; kip = 1,000 lbs.
For your convenience, a comprehensive index containing
our complete product and system offering is also located PROTEC TIVE COATINGS
at the back of the catalog. Search by common names and ClarkDietrich offers a wide variety of protective coatings
product names to help you quickly find exactly what to meet the specific requirements of a project.
youre looking for.
Non-structural products are coated to meet the minimum
Structural properties and load tables are available on requirements of AISI S220/ASTM C645, with a G40 or a
our website at clarkdietrich.com. protective coating with an equivalent corrosion resistance.
Equivalent coatings meet the metallic equivalency
HOW TO IDENTIF Y OUR PRODUC T S requirement of C645 by outperforming G40 in an
ClarkDietrich has adopted standard nomenclature ASTM B117 salt spray test. Non-structural products
established by the American Iron and Steel Institute may also be ordered with enhanced coatings, such as
(AISI) for identifying each of its products. Coding G60 for use in special applications. The buyer is solely
of each member consists of four parts, in this order: responsible to assure that product is ordered to properly
satisfy the applicable code or specification.
A number which identifies the web depth of the
member to two decimal places: 600 = 6.00," 1000
= 10.00," 550 = 5.50," 362 = 3.625," etc. Structural framing products are available with a variety
A letter that identifies the type of member, such as S = Stud/ of protective coatings that meet the CP60 coating
Joist, T = Track, U = U-channel, and F = Furring channel.
protection level requirements of AISI S200 and ASTM
A number that defines the flange dimension in inches to two
decimal places: 162 = 1.625," 200 = 2.00," 125 = 1.25," etc. C955. These coatings may include G60, A60, AZ50 or
A number following a hyphen that denotes the minimum delivered GF30, all of which satisfy the above referenced standards.
thickness in mils (33mils = 33/1000 inches which is approximately G90 coatings are an enhanced option that can be requested
0.0329"). Minimum delivered thickness is 95% of design thickness.
for highly corrosive environments. ClarkDietrich can
supply a specific or enhanced coating to meet specific
NOTE REG ARDING PRODUC T SUBS TITUTION
project requirements when requested. The buyer is solely
Care should be taken when substituting materials in
responsible to assure that product is ordered to properly
place of ClarkDietrich building materials. There is a
satisfy the applicable code or specification.
misconception within the construction industry regarding
the substitution of one manufacturers products or materials
DiamondPlus High-Performance Coatingthe next
for those of another manufacturer. The assumption is that
generation of high-performance, code-compliant steel
all studs of a given size and steel thickness are interchangeable.
framing systems. Clark Dietrich offers ProSTUD with
It may be possible that the substitution can safely be made,
DiamondPlus coating. This corrosion-resistant coating not
but the decision should not be made until the structural
only meets the code compliance of conventional G40
properties of the products or materials involved are compared
steelit far surpasses it. In fact, in ASTM B117 Salt Spray
by a qualified engineer.
Testing, samples coated with DiamondPlus didnt climb
above 3% surface rust even after 240 hours of testing. G40
with a chemical treatment coating reached the 10% failure
threshold at 192 hours on average. For the highest corrosion
resistance, request ProSTUD with DiamondPlus coating.
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
OVERVIEW 7
OVERVIEW
specifications as shown in the Code Approvals and Performance
Standards in the back of this catalog. Minimum thickness is 95% of
a general guideline only and does not replace the judgments
the design thickness, per AISI code. One mil is equivalent to 1/1000 and designs of a qualified architect and/or engineer. This
(0.001) of an inch. So, a 20 gauge stud measuring the minimum catalog does not provide load data necessary for building
uncoated base metal at 0.030 inches is 30mils thick.
design. Load capacities, limiting heights, physical and
ClarkDietrich thickness identification by color coding structural properties and span data for ClarkDietrich
Member
mils
Thickness
gauge
Design Min. Color
thickness thickness code
structural framing can be found at www.clarkdietrich.com.
18 25 0.0188" 0.0179" None
27 22 0.0283" 0.0269" Black Product, application renderings and photographs are
30 DW20 0.0312" 0.0296" Pink
33 20 0.0346" 0.0329" White provided as a tool to show the general intent of the
43 18 0.0451" 0.0428" Yellow
54 16 0.0566" 0.0538" Green framing or finishing application only. These renderings
68
97
14
12
0.0713"
0.1017"
0.0677"
0.0966"
Orange
Red
or photographs may or may not be applicable to a specific
118 10 0.1242" 0.1180" Blue project. They do not replace or supersede the architect
ClarkDietrich ProSTUD
Drywall framing system thickness
or engineer of record, ASTM guidelines, national or local
Member Design Min. Color building codes or approved industry standards.
gauge Mils ksi thickness thickness code
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
8 OVERVIEW
Cl a r kD i e t r ich L E E D I N F O R M A T I O N A N D R E Q U I R E M E N T S
ClarkDietrich
LEED Request Form LEED Credit MR 2 (Construction Waste Management)
online at clarkdietrich.com ClarkDietrich products are manufactured from cold-formed steel. Steel is 100% recyclable. This attribute can
help when diverting construction debris from the waste stream. Recycling construction waste contributes
to LEED Credits MR 2.1 and 2.2. The specific contribution will vary by project and must be determined
by the contractor. (Up to 2 pts.)
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
9
INTERIOR FRAMING
Interior framing that stands up to any test. At the heart of our interior framing line is our ProSTUD
Including yours. Drywall Framing System. Its not only been extensively
The inherent properties of steel make it a superior field-tested for quality and ease of installation, but it also
alternative to wood for interior framing: its light, strong, features a number of technological advances to enhance
versatile and noncombustible. With corrosion-resistant strength and versatility.
coatings, steel also adds durability and sustainability to
ClarkDietrich truly stands alone as a single source for a
your buildings. All of which means that steel is a perfect
full range of interior framing products.
solution for a variety of nonload-bearing applications,
such as partition walls, ceilings and column fireproofing Cost-effective, labor-saving solutions
Drywall, shaftwall, and area separation wall
in all types of low- to high-rise commercial structuresas
Door and window framing solutions
well as residential dwellings.
Sound-rated systems
Head-of-wall deflection systems
Bridging, bracing and backing
Absolute code compliance
INTERIOR FRAMING
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
10 DRY WALL FRA MING
Developed, tested, and approved by prosin the field. SOUND PERFORM ANCE
The ProSTUD Drywall Framing System can be called ProSTUD also has exceptional sound performance in
many things. Strong. Versatile. Fast. And without a over 50 tested sound assembliesmore testing than any
doubtrevolutionary. But it was also developed, tested other manufacturer in the industry.
and approved by pros in the field who demanded nothing
less than achieving absolute ease of use. Its performance ProSTUD Drywall Framing and ProTRAK Drywall Track
has also been proven by the most extensive laboratory were created specifically to work as a system. This means
evaluations available. they work better together for you in achieving strength,
fire and sound ratings. Its also an approach that leads to
THE INDUS TRY S PRODUC T OF CHOICE enhanced performance on the jobduring installation
Gauge equivalent (EQ) drywall framing must meet the and long after.
minimum performance requirements of conventional
High-strength steel combined with low-profile flange stiffening
drywall framing as defined by the Steel Framing
grooves and double offset web planking increases strength and
Industry Association (SFIA) and the Steel Stud provides greater limiting heights
Manufacturers Association (SSMA). For interior Diamond embossed web creates stiffness, reducing flange
drywall framing members, bending strength (or fade and screw spinout during drywall installation
allowable moment) is the criteria most important to Strong, lightweight stud and track cuts and handles easier
the strength of a wall or ceiling. ProSTUD employs than conventional flat steel studs
Flange grooves provide sight line for drywall alignment
modern roll-forming and steel-making technology
and aid in positioning screws at drywall joints to maintain the
that enhances the shape and strength with greater 3/8"edge requirement
efficiency. ProSTUDthe product of choiceexceeds Web and leg enhancements in ProTRAK provide straight
the performance of conventional drywall framing for and rigid legs, making it the best choice for framing walls,
allowable moment and screw connection strength. headers, soffits, and bulkheads
Nationwide availability
LIFE S AFE T Y
Life Safety is the primary concern and duty of all
construction and design professionals. ProSTUD
features a number of technological advances to enhance
its stiffness and strength, contributing to its allowable
moment performance. When it comes to fire-rated
systems, ProSTUD is UL-approved for the most common
UL design assemblies including V450, U419, V438 and
chase wall assemblies.
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
DRY WALL FRA MING 11
ProSTUD Thickness
Web width Flange
Product code Product name Design ksi
Gauge Mils (in) (in)
thickness (in)
ProSTUD 25 25 15 0.0158 50 1-5/8,
ProSTUD 20 20 19 0.0200 65 2-1/2,
PROS 1-1/4
ProSTUD 30MIL 20 DW 30 0.0312 33 3-5/8,
ProSTUD 33MIL 20 STR 33 0.0346 33 4, 6
ProTRAK Thickness
Web
Leg
Product code Product name ksi width
INTERIOR FRAMING
Design (in)
Gauge Mils (in)
thickness (in)
3 45
40 40
31
20 Gauge (Drywall)
20 Gauge (Drywall)
30
2 24
ProSTUD 20XD
1.75
ProSTUD 20
ProSTUD 25
20 Gauge (Drywall)
20 Gauge (Drywall)
1.48 15
25 Gauge
ProSTUD 20XD
1
ProSTUD 20
ProSTUD 25
25 Gauge
0
#6 Screw Shear (Bearing) Values
iProSTUD.com 120
105
Going mobile? With your smartphone 96 95 95
in hand, you can perform a fast, easy 90
Allowable Shear (lbs)
44
ProSTUD 25
ProSTUD 20
30
25 Gauge
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
12 DRY WALL FRA MING
openings, round or oval columns, and elliptical and Faster, Easier and Safer Installation
eyebrow curves.
C O N T O U R T R AC K 1 -1/4 " L E G
Thickness
Product
Design Size (in)
code Gauge Mils
thickness (in)
2-1/2
CNTB 25 18 0.0188 3-5/8
6
2-1/2
CETB 20 26 0.0273 3-5/8
6
PUNCHED WEBS
Contour Track is permanently locked into place by
securing it to the primary supporting structure using
the prepunched holes conveniently placed throughout
the web.
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
DRY WALL FRA MING 13
GROMMETS
Snap-In Bushing
CORNER ANGLE
INTERIOR FRAMING
Corner angle is a multipurpose Thickness
90 or 120/135 galvanized Product code Design Size (in)
Length
Gauge Mils (ft)
angle used in dozens of framing thickness (in)
applications. Some of the most 5/8 x 2
common applications include lapped 7/8 x 1-3/8
framing conditions, soffit framing, CAN 90 25 18 0.0188 1-1/2 x 1-1/2 10
2x2
floor and ceiling runner, chase wall 3x3
Corner Angle (90) construction and laminated gypsum 1-1/2 x 1-1/2
CANW 135 25 18 0.0188 10
drywall partitions. Custom sizes, 2x2
beads, and lengths are available. HCN (Hemmed) 90 25 18 0.0188 2x2 10
5/8 x 2
7/8 x 1-3/8
CAE 90 20 30 0.0312 1-1/2 x 1-1/2 10
2x2
3x3
1-1/2 x 1-1/2
CAEW 135 20 30 0.0312 10
2x2
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
14 DRY WALL FRA MING
Z- F U R R I N G
FURRING CHANNEL
BARRIER MESH
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
SOUND-R ATED SYSTEMS 15
P roS T U D 3 - 5 / 8 " S O U N D A S S E M B L I E S
STC Rating / Test Report
Partition type Assembly description
ProSTUD 25 (15mil) ProSTUD 20 (19mil) ProSTUD 30mil ProSTUD 33mil
INTERIOR FRAMING
2 layers 5/8" Type X GWB on the other side
Notes:
Sound assemblies are certified by Western Electro-Acoustic Laboratories.
NVLAP accredited for ASTM E90 & E413, ISO Certified.
See STC test reports at www.clarkdietrich.com/ProSTUD for detailed requirements of construction of wall assembly.
* Values are the same for R-11 insulation.
Contact ClarkDietrich Technical Services at 888-437-3244 for questions about ProSTUD sound assemblies.
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
16 SOUND-R ATED SYSTEMS
R C D e l u x e R E S I L I E N T C H A N N E L
Made of 21mil steel, RC Deluxe is one of the most Resilient channel should be installed perpendicular
effective, low-cost methods of improving sound to the framing members with the attachment flange
transmission loss through wood and steel frame of the RC Deluxe installed along the bottom edge.
partitions. It is the preferred resilient channel in Channel is prepunched for screw attachments
many applications because of its extra-wide 1-1/2" to wood or steel framing members. Nails are not
screw flange. recommended.
Thickness
Product Design Size Length
code Gauge Mils thickness (in) (ft)
(in)
RCSD 25 21 0.0221 1-1/2 12
Sound assemblies are certified by Western Electro-Acoustic Laboratories.
NVLAP accredited for ASTM E90 & E413, ISO Certified.
Additional test reports available through ClarkDietrich Technical Services.
*Values are the same for R-11 insulation.
**Visit iProSTUD.com for current STC ratings.
R C-1 P R O R E S I L I E N T C H A N N E L
Made of 25 gauge steel, RC-1 Pro is used as a cross- Resilient channel should be installed perpendicular
furring member for resilient attachment of gypsum. to the framing members with the attachment flange
Knurled face makes wallboard application easier. of the RC-1 Pro installed along the bottom edge.
Channel is prepunched for screw attachments
to wood or steel framing members. Nails are not
recommended.
Thickness
Product Design Length
Size (in)
code Gauge Mils thickness (ft)
(in)
RCUR 25 18 0.0188 1-1/4 12
Sound assemblies are certified by Western Electro-Acoustic Laboratories.
NVLAP accredited for ASTM E90 & E413, ISO Certified.
Additional test reports available through ClarkDietrich Technical Services.
*Values are the same for R-11 insulation.
**Contact our technical services department for current STC information.
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
SOUND-R ATED SYSTEMS 17
R C-1 P r o P l u s H E AV Y- D U T Y R E S I L I E N T C H A N N E L
Made of 22mil steel, RC-1 ProPlus is used as a cross- gypsum board. Resilient channel should be installed
furring member for resilient attachment of gypsum. perpendicular to the framing members with the
Knurled face makes wallboard application easier. attachment flange of the RC-1 ProPlus installed
along the bottom edge. Channel is prepunched
RC-1 ProPlus single-leg resilient channel is typically for screw attachments to wood or steel framing
used for applications with multiple layers of members. Nails are not recommended.
Thickness
Product Length
Design Size (in)
code Gauge Mils (ft)
thickness (in)
R C -2 P R O D O U B L E - L E G R E S I L I E N T C H A N N E L
INTERIOR FRAMING
Made of 25 gauge steel, RC-2 Pro double-leg Resilient channel should be installed
resilient channel is typically used for ceiling perpendicular to the framing members.
applications. It is used as a cross-furring member Channel is prepunched for screw attachments
for resilient attachment of gypsum. Knurled to wood or steel framing members.
face makes wallboard application easier.
Thickness
Product Size Length
code Design (in) (ft)
Gauge Mils
thickness (in)
R C -2 P r o P l u s H E A V Y - D U T Y D O U B L E - L E G R E S I L I E N T C H A N N E L
Made of 22mil steel to provide a stiffer resilient Resilient channel should be installed perpendicular
channel, RC-2 ProPlus heavy-duty double- to the framing members. Channel is prepunched for
leg resilient channel is typically used for ceiling screw attachments to wood or steel framing members.
applications with multiple layers of gypsum board.
It is used as a cross-furring member for resilient
attachment of gypsum. Knurled face makes wallboard
application easier.
Thickness
Product Size Length
code Design (in) (ft)
Gauge Mils
thickness (in)
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
18 SOUND-R ATED SYSTEMS
R E S I L I E N T S O U N D I S O L AT I O N C L I P
Installation of Resilient Furring Channel Note 1: By keeping the mounting flange down, the weight of the gypsum
to Steel or Wood Framing Members panel products will pull the resilient channel away from the stud improving
the sound rating.
Note: These guidelines are for ClarkDietrich Building Systems single
leg RC Deluxe and RC-1 Pro, and double leg RC-2 Pro. Details of Note 2: Two-legged resilient furring channels may be attached to the wall
construction for a specific assembly to achieve the required fire or sound and ceiling framing members using both legs. Alternately attach the legs
or acoustic rating shall be obtained from fire test reports, sound, or of the resilient furring channel to the framing members. This method of
acoustic tests, engineering evaluations, or listings from recognized sound attachment may reduce the sound rating performance of the assembly.
or acoustic laboratories. Verify acceptability with the approving authority prior to installation.
Install resilient furring channels at right angles (perpendicular) to the For walls, install the first (lowest) row of resilient furring channel no more
framing members. The resilient furring channel shall be positioned with than 2 in. (51mm) off of the floor and the last (highest) row of resilient
the slotted hole(s) directly over the framing member. The resilient furring furring channel not more than 6 in. (152mm) from the ceiling. For ceilings,
channel shall be attached to the framing member using the screw hole the first row and last row of resilient furring channel shall be located not
provided in the mounting flange. If no screw hole is provided or located at more than 6 in. (152mm) from the adjacent wall. (Measurements are to
the framing member, attach through the mounting flange. the center of the face of the resilient furring channel.)
No more than two layers of up to 5/8 in. (16mm) gypsum panel products Attach resilient furring channel to framing members with screws only. For
should be installed to resilient furring channel. steel framing, Type-S x 3/8 in. (9.5mm) pan-head framing screws may be
used. For wood framing members, Type-W or Type-S screws (minimum
Resilient furring channels should not be spaced greater than 24 in.
1-1/4 in. (32mm) long) may be used. It is not recommended that nails
(610mm) on-center when installed on wall framing members. For ceiling
be used. Install the screws in the holes provided in the mounting flange
framing members spaced 24 in. (610mm) on-center, install resilient
(whenever possible).
furring channels at 16 in. on-center maximum. For ceiling framing
members spaced 16 in. (406mm) on-center, install resilient furring Splicing of resilient furring channel members shall be done by nesting
channels at 24 in. (610mm) on-center maximum. the ends of the resilient furring channel members directly over the
framing member and screwing through the mounting flanges into the
In the case of wall framing members, resilient furring channels should be
framing member. (An acceptable alternative would be to butt the resilient
installed with the mounting flange of the resilient furring channel down,
furring channel members over the framing member leaving a minimum
except at the floor or starter row where the mounting flange may be
1/16 in. (1.6mm) gap between resilient furring channels.)
installed with the flange up, to accommodate fastening to the framing
members. In the case of two-legged resilient furring channel, attach only Gypsum panel products shall be attached to the resilient furring channel
the lower mounting flange to the wall framing members, except as noted. using a screw length to ensure that the screw point does not make
contact with the framing member. (This will minimize the potential of the
screws hitting the wall studs and short-circuiting the sound resistance
effectiveness of the resilient furring channels.)
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
HE AD-OF-WALL DEFLEC TION SYSTEMS 19
Its a real challenge these days meeting head-of-wall codes for fire stop and
life safety issues while maintaining the ability to absorb vertical movement
in low-, mid- and high-rise buildings. ClarkDietrich has the head-of-wall
deflection products and systems you need for interior wall assemblies
subjected to movementincluding seismic disturbances.
M a xT r a k S L O T T E D D E F L E C T I O N T R A C K
INTERIOR FRAMING
that isolates the cold-formed steel 6
8
framing system from the movement 2-1/2
of the primary structure. 3-5/8
MAX 18 43 0.0451 4 2-1/2 10
6
8
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
20 HE AD-OF-WALL DEFLEC TION SYSTEMS
D o ub l eTr a ck (OV E R T R AC K ) S Y S T E M
F a s t T o p C L I P
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
DOOR AND WINDOW FRAMING 21
RedHeader RO
RedHeader RO HE ADER
INTERIOR FRAMING
20 33 0.0346 33 3-7/8 3 1
Lock Clip. Header lengths should 5-7/8
HEAD 3-1/2
be ordered 1/2" shorter to fit inside
3-7/8
our Drop N Lock clips. 18 43 0.0451 33
5-7/8
3 1
7-7/8
RedHeader RO JA MB
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
22 DOOR AND WINDOW FRAMING
H E A V Y - D U T Y S T U D ( H D S ) F R A M I N G S Y S T E M
H D S H E A D E R /J A M B
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
BRIDGING, BRACING AND BACKING 23
U-CHANNEL
INTERIOR FRAMING
(U-Series) or SwiftClip (LS- CHN1 075U50-54 16 54 0.0566 3/4
Series), the U-channel creates a CHN2 150U50-54 16 54 0.0566 1-1/2
traditional assembly that allows for Available in 10,' 16' and 20' lengths.
the deflection of floor beams or
floor decks above interior partitions.
The single, long leg track assembly
requires 1-1/2" U-channel and
1-1/2" x 1-1/2" 16 gauge EasyClip
or SwiftClip clip angles, installed
continuously throughout the upper-
most punchouts to align the studs
vertically within the plane of the wall.
S w i f t C l i p L S - S e r i e s S U P P O R T C L I P
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
24 BRIDGING, BRACING AND BACKING
Fa s t B r i d g e C L I P
E a s y C l i p U - S e r i e s C L I P A N G L E
E a s y C l i p B - S e r i e s C L I P A N G L E
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
BRIDGING, BRACING AND BACKING 25
E a s y C l i p X - S e r i e s C L I P A N G L E
FL AT S T R A PPI N G
INTERIOR FRAMING
code Min. width Max. width (ft)
Gauge Mils thickness
(in) (in)
rotation and minor axis buckling (in)
under wind and axial loads. Block 20 33 0.0346
DTN3 2 12 10
18 43 0.0451
and strapping is typically used 16 54 0.0566
when wall studs exceed 6." Field cut, DTN5 14 68 0.0713 2 12 10
blocking is used if knockouts do not 12 97 0.1017
align. Its also used as bridging when DTN3 has a yield strength of 33,000psi.
framing members are unpunched. DTN5 has a yield strength of 50,000psi.
Danback WO O D B ACKI N G PL AT E
Just snap, flex and screw. Its that fast. Product Width Length Packaging
code (in) (in) Pcs./Skid
Danback is a heavy-duty, D16F*
D24F*
flexible wood backing system D16C**
5-1/8 48 250
used to support cabinets, shelves, D24C**
handrails, wall-mounted sinks
Reduces installation time up to 90%
and counters, and all other wall-
mounted fixtures. Danback provides Available for 16" and 24" o.c. framing
superior connection shear and Eliminates cutting, notching, ripping and routing
pullout strength to support and Made with Dricon fire-retardant treated wood
meet even some of the heaviest Complies with all national building codes
loading conditions. The patented
Dricon is a registered trademark of Arch Wood Protection, Inc.
hinge design actually flexes around
Danback is a registered trademark of Daniel W. Tollenaar.
the stud and snaps into place for a
U.S. Patent No. 6,705,056 of Daniel W. Tollenaar.
perfect fitevery time. *F = fire-treated plywood. D16 = 16" o.c. spacing. D24 = 24" o.c. spacing.
Trimables available for off-module spacing in small bucket or bulk quantities.
**FSC-certified lumber available on request, which can contribute to LEED points on
your project. Contact ClarkDietrich LEED professionals at 888-437-3244 for more
information. FSC chain-of-custody # BV-COC-008121.
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
26 BRIDGING, BRACING AND BACKING
FastB ack B AC K I N G C L I P
B ACKI N G PL AT E
K at z B L O C K I N G
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
BRIDGING, BRACING AND BACKING 27
NOTCHED TRACK
INTERIOR FRAMING
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
28 SHAF T WALL
Tested, approved assemblies with unprecedented flexibility. important wall assemblies in a building. Vertical chases
What makes the ClarkDietrich shaftwall construction and mechanical enclosures keep vital communication,
system unique is that it has been tested with almost every power, water, fresh air and exhaust systems intact when a
gypsum board and shaftliner manufacturer in the country. fire occurs.
Other systems are only tested with one type of gypsum
board and shaftliner. Unlike competing systems, the CONS TRUC TION ME THODS
ClarkDietrich CT-stud and J-tabbed track system provide Cavity shaftwalls are constructed utilizing one of two
maximum flexibility, allowing you to choose from a variety methods: masonry/CMU or light-gauge steel and gypsum.
of board manufacturers. This unprecedented flexibility Gypsum drywall shaftwall construction has become the
means quick availability of product at economical costs. preferred and most widely used shaftwall assembly. These
shaftwalls are lightweight, install faster, and provide lower
Shaftwall System consists of 1" shaftliner panels in-place costs. They also significantly reduce structural
supported by 2-1/2," 4" or 6" CT-studs and faced on one framing and foundation costs, and are easy, quick and
side with varying layers of fire code board. clean to install.
Stairwall Systems are designed to enclose stairwalls, Masonry shaftwalls in high-rise buildings historically
and are finished on both sides with varying layers of fire weigh between 20 and 45 lbs. per square foot,
code board. compared to gypsum assemblies that weigh between
10 and 13 lbs. per square foot. In addition to substantial
LIFE S AFE T Y & FIRE-RESIS TANT PROTEC TION weight reduction, gypsum shaftwall assemblies can be
Shaftwall systems are nonload-bearing, fire-rated wall installed from the exterior of the shaft at each floor,
assemblies that provide critical, life safety, fire-resistant eliminating the need for scaffolding.
protection for elevator shafts, stairwells, vertical chases
and mechanical enclosures. Shaftwalls in elevators and
stairwells provide the only means of evacuation from the
building in an emergencymaking them one of the most
Stairwall
Shaftwall
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
SHAF T WALL 29
C T S H A F T WA L L /S TA I RWE L L S T U D
J -TA B B E D T R A C K /J - R U N N E R
INTERIOR FRAMING
code Gauge Mils thickness
shaftwall assemblies. CT-studs (in)
(in) (in)
and gypsum shaftliner panels are 2-1/4
2-1/2
friction fit between the top and 3
TTN (2,3)* 25 21 0.0230
bottom J-tabbed track. J-tabbed 4
2-1/4
tracks have unequal legs with the 3
2-1/4
longer leg (available in 2-1/4" and 2-1/2
3
3") installed against the shaft. The 2-1/4
TTE (2,3)* 20 33 0.0346 4
leg provides a backstop for easy 3
installation of the shaftliner. Three- 6
2-1/4
3
inch leg track is typically used as
jamb struts around closure details, *2 designates 2-1/4" leg; 3 designates 3" leg.
including duct and door openings, Note: Revised ICC Report pending.
abutments and intersections.
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
30 ARE A SEPAR ATION WALL
Fire-resistance protects lives and property. installed between 2" H-studs spaced 24" o.c. At the top
Area separation walls are nonload-bearing, 2-hour and bottom of the walls, C-runners (or H-tracks) are
rated vertical wall assemblies that provide fire-resistant installed back-to-back between vertically stacked panels.
protection between adjacent living units in apartment Overall stacked area separation wall assemblies cannot
buildings, condominiums and townhouses. They are also exceed 50 feet.
referred to as party walls, firewalls, multi-family walls and
H-stud assemblies. A photo of an area separation wall system after a fire is
shown below. Although this was a tragic event, it clearly
Assembled between two independent walls, area separation proves the effectiveness of the system. It performed
walls form a commonly shared party wall that extends as designed by maintaining the integrity of the firewall,
from the foundation through the roofline. The walls are protecting the lives and property of the adjacent units.
assembled with two 1"-thick gypsum panel liners vertically
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
ARE A SEPAR ATION WALL 31
H-S TUD
C- R U N N E R
INTERIOR FRAMING
8
Attached to the foundation HRN1 25 18 0.0188 2-1/8
10
with powder-actuated fasteners,
Two-hour fire rated assembly and ICC approved.
C-runner is also used as top track
to cap the H-stud and gypsum
shaftliner panels, with a second
track screwed back-to-back to
the lower runner, to hold the next
assembly level.
to fire. The clips hold the area *AB63 meets requirements of ICC-ES Legacy Report 92-19.
separation wall assemblies in place
at the floor, roof and truss line
between adjacent units. In a fire,
the aluminum burn clips on the
fire-ridden side of the wall will melt,
allowing the wall structure for that
side to collapse.
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
32 BL A ZEFRAME FIRE STOP DEFLECTION TRACKS
(L)
(S)
1.00" .22"
Fastener mid-height of
exposed slot
S L 1 (D E E P LEGS LOT TE D O NE S ID E)
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
BL A ZEFRAME FIRE STOP DEFLECTION TRACKS 33
D L (D E E P LEGSO LID)
INTERIOR FRAMING
legs with fire stop on both sides
JR (J-RUNNER)
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
34
EXTERIOR FRAMING
From low-rise to high-rise, count on and cost-effectiveness, steel is also an excellent choice for
exterior framing that stands tall. residential construction. While light-gauge steel is commonly
The high strength-to-weight ratio of light-gauge steel stick-framed, it is also highly suited for prefabricated panel
framing maximizes design flexibility and delivers superior construction, providing additional economy in todays highly
structural integrity for a variety of criteria, including high competitive construction industry.
wind and seismic loads. Its also easily insulated for energy
Used as primary framing up to nine stories
conservation and provides noncombustible support for
Economically combined with structural steel or concrete
fire-rated construction.
Ideal support for brick-veneer, stucco and E.I.F.S.
Curtain wall, axial load-bearing wall and
Light-gauge steel is an ideal exterior framing material head-of-wall deflection systems
for all types of low- to high-rise commercial structures, Door and window framing
including educational, institutional, multi-family and Bridging and bracing systems
multi-use. Because of its strength, ease of installation Conventional or specialty load-bearing headers
NOTE: This catalog does not provide load data (load capacities, limiting heights, physical and structural properties and span data) necessary for
building design. Contact ClarkDietrich at 888-437-3244 for technical assistance.
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
CURTAIN WALL FR A MING 35
C-S T U D S
EXTERIOR FRAMING
Member gauge
Extra-wide studs/joist have a 2-1/2" wide code* (mils) (in) (in) (in)
flange and a 5/8" return and are used in floor 362S250-x 3-5/8
joist assemblies and heavy loading conditions. 400S250-x 20 (33), 4
600S250-x 18 (43), 6
CSE3 (20 & 18 gauge)
800S250-x 16 (54), 8 2-1/2 5/8
CSE5 (16, 14 & 12 gauge)
1000S250-x 14 (68), 10
1200S250-x 12 (97) 12
1400S250-x 14
*20 and 18 gauge are standard as 33ksi yield strength. 16, 14 and 12 gauge are standard as 50ksi yield strength.
x = mil thickness identifier
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
36 CURTAIN WALL FR A MING
K N O C KO U T S /K N O C KO U T PAT T E R N
ClarkDietrich light-gauge C-studs for axial load- Knockouts are punched 12" o.c. from the lead edge
bearing and curtain wall framing are prepunched with with additional knockouts every 24" o.c. (on the
knockouts at regular intervals. These punchouts are West Coast, the first knockout is punched 24" o.c.
specifically designed to allow for rapid installation of from the lead edge). Caution must be exercised when
pipes, electrical conduit and wall bridging. installing studs so knockouts align for bridging. Based
on stud length, the distance the knockout falls from
Standard knockout sizing is 1-1/2" x 4" in members the tail end of the stud may not be the same from the
3-1/2" and wider. Members smaller than 3-1/2" are lead end. To align punchouts, make sure to use the
unpunched unless otherwise specified at time of same end in the same direction consistently.
order. If specified, members will be punched with a
3/4" x 4" knockout.
GROMMETS
Grommets snap easily into stud Product code Size (in) Description Pcs./Carton
knockouts and are used to protect
3/4 For 1-5/8" and 2-1/2" studs
electrical wiring and plumbing GROM
1-1/2 For 3-1/2" and wider studs
100
lines from contacting metal.
Grommets are commonly used
when metal conduit is not required
2-Piece Grommet by building code.
Snap-In Bushing
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
CURTAIN WALL FR A MING 37
CORNER ANGLE
H E AV Y- D U T Y F U R R I N G C H A N N E L
EXTERIOR FRAMING
ClarkDietrich custom fabricates just about any shape, bend, angle or specialty framing
component to your exact specification. Custom parts include corner angles, roof
ridge angles, clip angles, long and uneven leg tracks, eave closures, support clips and
furring channels. To ensure proper fabrication, ClarkDietrich requires a detailed, fully
dimensioned part drawing at time of order placement.
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
38 DOOR AND WINDOW FRAMING
RedHeader RO
RedHeader RO HE ADER
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
DOOR AND WINDOW FRAMING 39
RedHeader RO JA MB
EXTERIOR FRAMING
RedHeader RO Drop N Lock CLIP
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
40 DOOR AND WINDOW FRAMING
H E A V Y - D U T Y S T U D ( H D S ) F R A M I N G S Y S T E M
H D S H E A D E R /J A M B
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
HE AD-OF-WALL DEFLEC TION SYSTEMS 41
M a xT r a k S L O T T E D D E F L E C T I O N T R A C K
M a xT r a k 2 D S L O T T E D D E F L E C T I O N & D R I F T T R A C K
EXTERIOR FRAMING
75167 14 68
75185 18 43
75186 16 54 8 2-1/2 10
75187 14 68
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
42 HE AD-OF-WALL DEFLEC TION SYSTEMS
D o u b l eTr a c k (O V E R T R A C K ) S Y S T E M
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
HE AD-OF-WALL DEFLEC TION SYSTEMS 43
F a s t T o p C L I P
EXTERIOR FRAMING
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
44 BRIDGING AND BRACING
Spazzer 5400
S p a z z e r B A R F LY C L I P
The Spazzer fly clip is a secure, Product code Size (in) Packaging Pcs./Carton
SFLY 1 x 1-1/4 x 1 100
fast and efficient way to finish a
wall section. This prepunched clip
eliminates the need for cutting and
bending when using the Spazzer
5400 spacer bar.
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
BRIDGING AND BRACING 45
U-CHANNEL
S w i f t C l i p L - S e r i e s S U P P O R T C L I P
EXTERIOR FRAMING
LS9713 12 97 0.1017 Joists 25
LE543 16 54 0.0566 Fixed/Joists/Trusses 100
LE683 14 68 0.0713 1-1/2 x 3 x 3-1/4 Fixed/Joists/Trusses 100
LE973 12 97 0.1017 Fixed/Joists/Trusses 50
LE-Series Support Clip LE545 16 54 0.0566 Fixed/Joists/Trusses 100
LE685 14 68 0.0713 1-1/2 x 3 x 5-1/2 Fixed/Joists/Trusses 100
LE975 12 97 0.1017 Fixed/Joists/Trusses 50
LE547 16 54 0.0566 Fixed/Joists/Trusses 100
LE687 14 68 0.0713 1-1/2 x 3 x 7-1/4 Fixed/Joists/Trusses 50
LE977 12 97 0.1017 Fixed/Joists/Trusses 50
LA543 16 54 0.0566 Joists/Trusses 100
LA683 14 68 0.0713 3 x 3 x 3-1/4 Joists/Trusses 100
LA973 12 97 0.1017 Joists/Trusses 50
LA545 16 54 0.0566 Joists/Trusses 100
LA685 14 68 0.0713 3 x 3 x 5-1/2 Joists/Trusses 50
LA975 12 97 0.1017 Joists/Trusses 50
LA547 16 54 0.0566 Joists/Trusses 50
LA-Series Support Clip LA687 14 68 0.0713 3 x 3 x 7-1/4 Joists/Trusses 50
LA977 12 97 0.1017 Joists/Trusses 50
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
46 BRIDGING AND BRACING
E a s y C l i p U - S e r i e s C L I P A N G L E
FL AT S T R A PPI N G
G U S S E T PL AT E S FO R S H E A RWA L L B R AC I N G
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
LOAD-BEARING 47
H E A V Y - D U T Y S T U D ( H D S ) F R A M I N G S Y S T E M
L- H E A D E R
Tr a d e R e a d y H E A D E R
EXTERIOR FRAMING
The TradeReady load-bearing Thickness
Wall Leg
Product
one-piece header drastically code Gauge Mils
Design thickness stud size length
(in) (in) (in)
reduces labor costs when compared
to standard box beam headers 3-5/8
TDHA 14 68 0.0713 8
6
constructed with C-shaped 3-5/8
members. Pre-engineered to fit TDHB 14 68 0.0713 12
6
standard door and window openings,
Standard lengths are 82" and 118."
the TradeReady headers are easy Custom sizes available on request.
and fast to install. U.S. Patent No. 5,689,922
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
48
FLOOR FRAMING
You can have confidence in the strength of steel For all of these reasons, steel floor framing has become
under your feet. the standard for low- and mid-rise commercial structures
Floor framing made from cold-formed steel is stronger such as hotels, apartments, condominiums and assisted
and more versatile. Its high strength-to-weight ratio living, as well as residential homes.
provides strong loading capacity and maximum spanning Available in a variety of web sizes, flanges,
capability. It can be used with all traditional flooring gauges and yield strengths
materials such as plywood, OSB, concrete-filled steel Pre-spaced joist tabs
deck or one of the many varieties of fiber-reinforced Greater spanning capabilities
cement board. It doesnt squeak when you walk across it. Prepunched openings
Full system of joist components, accessories,
Whats more is that ClarkDietrichs exclusive hangers and connectors
T H E Cl a r kD i e tr i ch Tr a d e Re a d y F LO O R S Y S T E M
The revolutionary TradeReady Steel Joist System features a tabbed rim track to strengthen the joist against web crippling
loads, and to provide greater versatility and strength for ledger applications. In conjunction with other floor sheathing
products, this system provides one of the most cost-effective systems for non-combustible low- and mid-rise structures.
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
FLOOR FRAMING 49
Tr a d e R e a d y S T E E L J O I S T
8 Diam. 12 TDW
10 Diam. 14 TDW
Tr a d e R e a d y R I M
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
50 FLOOR FRAMING
Tr a d e R e a d y S T R U C T U R A L B L O C K I N G
E a s y C l i p Q u i c kTw i s t W E B S T I F F E N E R
L I G H T- G AU G E C-J O I S T F R A M I N G
*18 gauge is standard as 33ksi yield strength. 16, 14, and 12 gauge are standard as 50ksi
yield strength.
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
FLOOR FRAMING 51
18 gauge is standard as 33ksi yield strength. 16, 14, and 12 gauge are standard as 50ksi
yield strength.
Depth of TSB is measured to the inside of the flanges.
WEB STIFFENER
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
52 FLOOR FRAMING
E a s y C l i p E - S e r i e s S U P P O R T C L I P
E a s y C l i p S - S e r i e s S U P P O R T C L I P
TENSION BRACING
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
FLOOR FRAMING 53
BRIDLE HANGER
FLOOR FRAMING
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
54
INTERIOR FINISHING
Occupants never see the effort put into drywall finish condition. Metal beads and trims can be
building the wall. They only see the finish. nailed, screwed, stapled or clinched in place and finished
ClarkDietrich offers an unmatched selection of interior with joint compound. They are low-cost, easily applied
finishing productsall designed for durability and finesse. and provide high-quality, long-lasting professional
finishes.
Paper-faced metal beads and trims combine galvanized
Strong; dent- and impact-resistant
metal with high-grade paper tape to provide cost-
Precision manufactured ensuring straight,
effective, problem-free, compound-embedded drywall sharp and crisp edges and corners
finishing. Our products allow the joint compound Corrosion-resistant
applied to the underside to seep through perforations Vinyl beads and trims are designed to provide superior,
in the paper to provide superior adhesion and bonding long-lasting interior finishes for drywall and veneer
to gypsum. Corner and edge cracking are virtually plaster. Vinyl offers architects, interior designers
eliminated because beads float with the gypsum, and contractors much more flexibility to create
independent of framing movement or settling. dramatic, sweeping arches, curvatures and distinctive
Smoothest finish available architectural details. Vinyl also provides superior
Tape-on products provide superior adhesion and bonding expansion and contraction properties as the products
Enhanced paintability
become embedded in the substrate prior to coating
Traditional metal drywall beads and trims provide crisp, and, therefore, actually move with the building through
clean and straight protection for gypsum wallboard temperature changes.
construction. Available in a wide selection of products Durable; impact-, corrosion- and ignition-resistant
and sizes, metal is the versatile choice for almost any Superior expansion and contraction properties
Excellent paint adhesion, no priming required
Goldline paper-faced tape-on beads combine galvanized metal corner and edge protection with high-grade paper tape to
provide cost-effective, problem-free outside drywall corner finishing. Theyre available in a number of different widths to
suit most wallboard applications. Wider flange beads are used to cover imperfect corners, while shorter flanges are used to
achieve maximum efficiency.
Substantially reduces joint compound consumption and eliminates one finish coat
Does not require nails, staples, screws or crimps
Impervious to scuffing and fluffing-up
Will not be damaged by sanding
Superior adhesion, bonding and paintability
Notes:
GOLDLINE and PLATINUM are registered PLATINUM Trims (separate patent) are covered under the following:
trademarks of Bailey Metal Products, Ltd. USA 7,214,434 B2
GOLDLINE Trims are covered under the following patents: Canada 2,417,325
USA 5,836,122 and 5,613,335 Australia 2004202648
Canada 2,212,854 New Zealand 533606
Australia 695482
New Zealand 302378
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
PAPER-FACED BE ADS AND TRIMS 55
PA P E R- FAC E D M E TA L O U T S I D E CO R N E R , TA P E- O N B E A D
INTERIOR FINISHING
Applied using joint compound, the P1XU B1XW EL Extra Wide Equal 7/8 7/8 5/8 5/8
P1SU B1 Super Wide Super Wide Equal 1-1/8 1-1/8 5/8 5/8
beads don't require mechanical
fasteners. Helps reduce labor Other lengths are available.
and material costs by reducing
the amount of joint compound
needed, and also eliminating one
pass of finishing.
PA P E R- FAC E D M E TA L O F F -A N G L E CO R N E R , TA P E- O N B E A D
PA P E R- FAC E D I N S I D E CO R N E R , TA P E- O N B E A D
PA P E R- FAC E D M E TA L O F F -A N G L E I N S I D E CO R N E R , TA P E- O N B E A D
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
56 PAPER-FACED BE ADS AND TRIMS
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
PAPER-FACED BE ADS AND TRIMS 57
PA P E R- FAC E D I N N E R COV E , TA P E- O N T R I M
INTERIOR FINISHING
embedded in joint compound and
pressed firmly into place. Excess
compound is removed with a drywall
knife or wiped clean with a rag.
PA P E R- FAC E D M E TA L L , TA P E- O N T R I M
PA P E R- FAC E D M E TA L R E V E A L , TA P E- O N T R I M
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
58 ME TAL BE ADS AND TRIMS
Quicksilver CO R N E R B E A D
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
ME TAL BE ADS AND TRIMS 59
INTERIOR FINISHING
1-1/4 x 1-1/4
(meets ASTM C1047) provides (shiny) 9' 0"
10' 0"
enhanced corrosion protection 12' 0"
and sturdy reinforcement at
Not available in all geographic areas.
exposed 90 corners. Flanges are
knurled and perforated to ease
joint compound adhesion and
nail attachment.
S P L AY E D C O R N E R B E A D
B U L L N O S E S P L AY E D 13 5 C O R N E R B E A D
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
60 ME TAL BE ADS AND TRIMS
ClarkDietrich vinyl 2-way 3/4" Product code Style Size radius (in)
Packaging
Pcs./Box Cartons/Skid
corner caps provide the ideal Plastic 2-way
component to transition bullnose M285 3/4 50 25
corner cap
corner beads to a crisp finish
where inside corners intersect
at 90. Examples of applications
include windows, closets, doorways,
skylights, etc. Easy to install, this
component provides a cost-effective
alternative to time-consuming
mitering of corners.
ClarkDietrich 3-way 3/4" bullnose Product code Style Size radius (in)
Packaging
Pcs./Box Cartons/Skid
90 corner caps provide the ideal Plastic 3-way
solution to finish corners quickly and M385 3/4 50 25
corner cap
efficiently at 3-way intersections.
Features extended tabs for easier
alignment and a professional finish.
Works well with both metal and vinyl
bullnose corner beads, eliminating
the need for special corner bead
applications and mitering.
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
ME TAL BE ADS AND TRIMS 61
INTERIOR FINISHING
systems. Quick and easy to install,
this product eliminates corner gaps
and the need for time-consuming
caulking and filling. Use with metal
or vinyl 3/4" bullnose corner bead
for transition onto baseboard or
crown molding up to 4-1/2" wide.
M E TA L J -T R I M
M E TA L U -T R I M / S PA C K L E J
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
62 ME TAL BE ADS AND TRIMS
M E TA L L-T R I M
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
VINYL BEADS AND TRIMS 63
VIN Y L CORP. function without question and meet or exceed all applicable
The finest accessories. The best customer experience. specifications. Youll find that we have listened to building
For years, these have remained the hallmarks of Vinyl professionals across the walls and ceilings industry spectrum,
Corp.s business. Today, as a wholly owned subsidiary of to ensure our exacting manufacturing tolerances create
ClarkDietrich, Vinyl Corp. continues to lead the way with products that are easy to fit and form every time, every job.
innovations for stucco, plaster, drywall, veneer and EIFS/
INTERIOR FINISHING
DEFS PB and PM applications. Vinyl Corp. works equally as hard to maintain a reputation for
customer service. From 24-hour turnaround on orders, to in-
At Vinyl Corp., quality begins with products derived from house expertise, to comprehensive technical support materials,
superior ingredients. In fact, a commitment to using only Vinyl Corp. excels at keeping projects moving forward.
lead-free virgin vinyl compounds means you can count
on over 1,000 vinyl wall and ceiling accessories that See all that we have to offer at vinylcorp.com.
V I N Y L S P L AY E D C O R N E R B E A D 120/ 13 5
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
64 VINYL BEADS AND TRIMS
V I N Y L A R C H WAY C O R N E R B E A D
V I N Y L B U L L N O S E S P L AY E D 120/ 13 5 C O R N E R B E A D
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
VINYL BEADS AND TRIMS 65
V I N Y L B U L L N O S E A R C H WAY C O R N E R B E A D
INTERIOR FINISHING
3/4
10
Notched flanges enable it to be VBAB
8
1-1/2
arched to an inside or outside radius. 10
Secure each tab on the archway
bead with adhesive or staples before
application of joint compound.
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
66 VINYL BEADS AND TRIMS
V I N Y L 3/4 " B U L L N O S E TO 90 T R A N S I T I O N C A P
VINYL J-BEAD
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
VINYL BEADS AND TRIMS 67
V I N Y L L-S T O P B E A D
INTERIOR FINISHING
5/8
nails, screws or staples to studs 10
through bead flange. Multiple
perforations along 1-1/4" flange
and raised shoulder enhance strong
compound adhesion and provide
for a flush finish. Rustproof,
dent-resistant and easy to field
cut without distorting profile or
leaving sharp edges and burrs.
V I N Y L Ri p B e a d L-T R I M
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
68 VINYL BEADS AND TRIMS
B U L L N O S E J B E A D
B U L L N O S E J B E A D Surface Application
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
69
M E TA L L AT H A N D ACC E S S O R I E S
Durable beauty starts beneath the surface. Applications include interior and exterior walls,
Whether using conventional or veneer plaster, ceilings, soffits, fascia and ceramic tile underlayment
having the right trims, control joints and corner for both commercial and residential construction.
reinforcements is an integral part of the wall Flat diamond mesh, self-furring dimpled
systems appearance and long-term performance. and V-groove and high rib lath
ClarkDietrichs history in the manufacturing of metal Wide selection of beads, screeds, joints and trim, in metal and vinyl
Strength, flexibility, impact resistance
lath and accessories gives us unique knowledge of
Fire resistance: two hours for partitions,
this trade and the product quality it requires. four hours for ceilings and columns
Extremely difficult to penetrate, providing
Metal lath and accessories create a strong mechanical security against break-through
bond with plaster, stucco and veneer, providing General notes/limitations: Metal lath products should not be
superior strength and reinforcement. Expanded used with magnesium oxychloride cement stuccos or stuccos
mesh and rigid pronounced edges provide excellent containing calcium chloride additives. In ceiling assemblies,
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
70 ME TAL L ATH
G A LV A N I Z E D J u n i o r M E S H L A T H ( F )
S E L F-FU R R I N G D I M PL E D L AT H (S FD)
S E L F-FU R R I N G V- G R O OV E M E S H L AT H (S F V )
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
ME TAL L ATH 71
3/8 " H I G H R I B L AT H
S P R AY R I B L AT H
U T I L IT Y L AT H
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
72 ME TAL L ATH
S T R I P L AT H
C o r n e r i t e M E TA L L AT H A N G L E
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
ME TAL L ATH 73
Structalath II
Tw i n T r a c
M e g a L a t h
V Tr u s s
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
74 CORNER AND CASING BEADS
#1A E XPA N D E D F L A N G E CO R N E R B E A D
#2 A D o u b l e -X C O R N E R B E A D
#6 6 E XPA N D E D F L A N G E C A S I N G B E A D
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
CORNER AND CASING BEADS 75
#6 6 E XPA N D E D F L A N G E C A S I N G B E A D W I T H W E E P H O L E
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
76 CONTROL AND EXPANSION JOINTS
D O U B L E-V CO N T R O L J O I N T #15
D O U B L E -J C O N T R O L J O I N T # 1 5 x 5
CAUTION: Joints and corners are a potential point of water intrusion. ClarkDietrich strongly recommends building paper be placed as flashing behind all joints and
corners. Also, a bead of high-quality caulking should be applied under the joints prior to the attachment of the materials.
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
CONTROL AND EXPANSION JOINTS 77
# 40 2- P I E C E E XPA N S I O N J O I N T
CAUTION: Joints and corners are a potential point of water intrusion. ClarkDietrich strongly recommends building paper be placed as flashing behind all joints and
corners. Also, a bead of high-quality caulking should be applied under the joints prior to the attachment of the materials.
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
78 WEEP AND SILL SCREEDS
F. H . A . 7 F O U N D AT I O N W E E P S C R E E D
7/8 " S I L L S C R E E D
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
WEEP AND SILL SCREEDS 79
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
80 VENEER PLASTER BEADS AND TRIMS
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
VENEER PLASTER BEADS AND TRIMS 81
TILE CAP
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
82 VINYL CORNER AND CASING BEADS
Vinyl Corp. #1 corner bead provides Product code Length (ft) Grounds Size (in) Pcs./Box
#1 7, 8, 9, 10 Any 2-1/2 x 2-1/2 50
hard-to-damage, rustproof, straight #2 8, 10 Any 2-3/4 x 2-3/4 40
corners, and is easily curved for
smooth arches. A heavier version of
our #1 corner bead, the #2 corner
bead also has wider flanges. #2
corner beads should be used where a
more durable corner is required.
Vinyl Corp. jumbo corner bead is Product code Grounds Size (in) Pcs./Box
#40 Any 4-1/4 x 4-1/4 25
designed for deep fills or irregular #30 Any 3x3 25
corner conditions. #43 Any 4-1/4 x 3 25
#4150 Any 4-1/4 x 1-1/2 25
#3150 Any 3 x 1-1/2 25
#40 U.S. Patent Nos. 5,816,002 and 6,070,374
#30
#4150
V I N Y L Archmaker CO R N E R B E A D
Our #1 Archmaker corner bead Product code Grounds Size (in) Pcs./Box
#1Arch Any 2-1/2 x 2-1/2 50
provides true, uniform, curved or #2Arch Any 2-3/4 x 2-3/4 40
arched reinforcement. The heavier #1XArch Any 2-1/2 x 1-1/2 50
version of our #1 Arch, our #2 Arch #2XArch Any 2-3/4 x 1-1/2 40
corner bead should be used for U.S. Patent Nos. 5,816,002 and 6,070,374
applications requiring increased
damage resistance. The #1X
Archmaker corner bead provides
a true, uniform, curved or arched
reinforcement with a 1-1/2" flange
for narrow returns. The #2X Arch
is a heavier version of our #1X Arch
and should be used for increased
damage resistance. All of our
Archmaker corner beads conform
to most arched and curved designs.
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
VINYL EXPANSION CONTROL JOINT S 83
Designed for use in applications Product code Length (ft) Grounds Size (in) Pcs./Box
#1B 7, 8, 9, 10 Any 2-1/2 x 2-1/2 20
such as schools and hospitals, Vinyl #2B 8, 10 Any 2-3/4 x 2-3/4 16
Corp.s #1B 3/4" bullnose corner
bead provides hard-to-damage,
rustproof, soft corners. The #2B
bullnose corner bead is a heavier
version that is appropriate for
applications where a more durable
corner is required.
V I N Y L B U L L N O S E Archmaker CO R N E R B E A D
#1 bullnose Archmaker corner Product code Length (ft) Grounds Size (in) Pcs./Box
Like their metal counterparts, vinyl Product code Grounds (in) Dimensions Pcs./Carton
6625 1/4 100
casing beads are used to terminate 6638 3/8 100
stucco and stone against doors, 6650 1/2 100
1-3/4" flange width
windows and dissimilar surfaces. 6658 5/8
perforated flange
100
Casing beads should not be used in 6675 3/4 75
6678 7/8 75
lieu of foundation weep screeds at 66100 1 75
the base of the wall, as they do not
Visit vinylcorp.com for more vinyl accessories.
meet building code requirements.
Control joints are designed Product code Grounds (in) Size (in) Pcs./Box
1538 3/8 35
to relieve stress and assist in 1550 1/2 35
controlling cracking in large areas 1558 5/8 30
4 flange width
of walls and ceilings. Vinyl Corp.s 1575 3/4 26
specially designed Connector Clips 1578 7/8 20
15100 1 20
are provided for alignment and base
for sealants. NOTE: Connector Clips are not provided with 3/8" ground.
Positive attachment of each flange or control joint to separate framing is required.
Caulk all intersections, butt joints, ends and corners at time of installation.
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
84 VINYL WEEP AND SILL SCREEDS
Used to provide stress relief and Product code Grounds (in) Size (in) Pcs./Box
1525X 1/4 2-1/4 flange width 50
assist in controlling cracking in large 1538X 3/8 50
areas of walls and ceilings, control 1550X 1/2 40
joints with removable tape protect 1558X 5/8
3-1/4 flange width
35
the deep V expansion slot during 1575X 3/4 30
1578X 7/8 30
construction. Specially designed 15100X 1 30
Connector Clips are provided for
NOTE: Connector Clips are not provided for 1/4" or 3/8" grounds.
alignment and base for sealants. Positive attachment of each flange of control joint to separate framing is required.
Recommended for smooth finishes. Caulk all intersections, butt joints, ends and corners at time of installation.
3-1/2 " V IN Y L WE E P S CR E E D
Designed to relieve moisture from Product number Grounds (in) Dimensions Pcs./Carton
WS38-350U 3/8 50
stucco/stone and act as a stop. Install WS50-350U 1/2 50
on frame construction where stucco/ WS58-350U 5/8 4" overall width, 40
stone and foundation walls meet. WS75-350U 3/4 unperforated flange 40
Shown here is standard weep screed. WS78-350U 7/8 30
WS138-350U 1-3/8 30
Caulk all intersections, butt joints, ends and corners at time of installation.
Other variations of the vinyl weep screed can be found at vinylcorp.com.
V I N Y L FO U N DAT I O N WE E P S C R E E D
Foundation weep screed acts as Product code Grounds (in) Size (in) Pcs./Box
FWS6678W 7/8 40
a stop, and is designed with an FWS66138W 1-3/8
3-1/2 overall width
40
unperforated flange, allowing
Caulk all intersections, butt joints, ends and corners at time of installation.
moisture removal from stucco
installations on frame construction
at the foundation line.
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
85
Any clip or connector youd need, exactly when But what makes Clip Express unique is not simply the
you want it. Strength is in the details. vast lineup of products. Its our delivery, and pronto.
For the widest and most cost-effective array of clips, Because we know that staying on schedule is crucial,
connectors, supports and framing hardware, turn to we ship most orders the same day they are received.
ClarkDietrich Clip Express. With Clip Express, you
SM
get fully engineered, rigorously tested and precision- We know that having the right products, at the right
formed connectors each and every time. Many of time, and at the right price is absolutely essential to
our connectors were developed by, or in conjunction getting the job done. ClarkDietrich Clip Express is
with, framing installers in order to deliver high- ready to deliver. When, how and where you need it.
performance products for significant installed savings. Curtain wall/bypass connections
Head-of-wall, deflection and rigid connections
Floor joist, roof and truss framing connections
Bridging, bracing and backing connections
Gusset plates, specialty clips, connectors and fasteners
Overnight delivery available
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
86 CURTAIN WALL AND BYPA SS CONNEC TIONS
F a s t C l i p S L I D E C L I P
Fast Str ut
Fast Strut 15
Fl at Tail S li d e Clip
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
CURTAIN WALL AND BYPA SS CONNEC TIONS 87
S l i d e C l i p
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
88 HE AD-OF-WALL DEFLEC TION CONNEC TIONS
F a s t T o p C L I P
FTC5
E X T E N D E D F a s t C l i p SLIDE CLIP
Extended Uni-Clip
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
RIGID CONNECTIONS 89
U n i - C l i p E N D C L I P
E a s y C l i p E - S e r i e s S U P P O R T C L I P
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
90 RIGID CONNECTIONS
E a s y C l i p U - S e r i e s C L I P A N G L E
E a s y C l i p B - S e r i e s C L I P A N G L E
E a s y C l i p X - S e r i e s C L I P A N G L E
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
RIGID CONNECTIONS 91
Fa stB r i d ge C L I P
S w i f t C l i p L S - S e r i e s S U P P O R T C L I P
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
92 RIGID CONNECTIONS
E a s y C l i p D - S e r i e s A N C H O R C L I P
E a s y C l i p T - S e r i e s T A L L A N C H O R C L I P
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
BRIDGING, BRACING & BACKING CONNECTIONS 93
E a s y C l i p U - S e r i e s C L I P A N G L E
E a s y C l i p B - S e r i e s C L I P A N G L E
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
94 BRIDGING, BRACING & BACKING CONNECTIONS
Spazzer 5400
Used to secure the Spazzer 5400 Product code Size (in) Packaging Pcs./Carton
SPBG 3-1/4 x 1-5/8 100
spacer bar when used in load-
bearing applications.
S p a z z e r B A R F LY C L I P
The Spazzer fly clip is a secure, Product code Size (in) Packaging Pcs./Carton
SFLY 1 x 1-1/4 x 1 100
fast and efficient way to finish a
wall section. This prepunched clip
eliminates the need for cutting and
bending when using the Spazzer
5400 spacer bar.
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
BRIDGING, BRACING & BACKING CONNECTIONS 95
Danback WO O D B ACKI N G PL AT E
Just snap, flex and screw. Its that fast. Product Width Length Packaging
code (in) (in) Pcs./Skid
Danback is a heavy-duty, D16F*
D24F*
flexible wood backing system D16C**
5-1/8 48 250
used to support cabinets, shelves, D24C**
handrails, wall-mounted sinks
and counters, and all other wall- Reduces installation time up to 90%
mounted fixtures. Danback provides Available for 16" and 24" o.c. framing
superior connection shear and Eliminates cutting, notching, ripping and routing
pullout strength to support and Made with Dricon fire-retardant treated wood
meet even some of the heaviest
Complies with all national building codes
loading conditions. The patented
hinge design actually flexes around Dricon is a registered trademark of Arch Wood Protection, Inc.
the stud and snaps into place for a Danback is a registered trademark of Daniel W. Tollenaar.
U.S. Patent No. 6,705,056 of Daniel W. Tollenaar.
perfect fitevery time.
*F = fire-treated plywood. D16 = 16" o.c. spacing. D24 = 24" o.c. spacing.
Trimables available for off-module spacing in small bucket or bulk quantities.
**FSC-certified lumber available on request, which can contribute to LEED points on
your project. Contact ClarkDietrich LEED professionals at 888-437-3244 for more
information. FSC chain-of-custody # BV-COC-008121.
K at z B L O C K I N G
FastB ack B AC K I N G C L I P
For use with the FastBack backing Product code Width (in) Length (in) Packaging Pcs./Carton
FBBC 1-1/4 5-1/8 100
system, the FastBack backing clip FBBC 1-1/4 10-1/4 100
conceals fasteners on the face of
U.S. Patent No. 7,882,676 is owned by Jeffery Thomas Ellis.
the product. Rotate the FastBack
clip over the flange of the stud until
it sits flush. Then fasten into place
using drywall screws in the pre-
drilled holes.
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
96 GUSSE T PL ATES
G - S e r i e s P U N C H E D G U S S E T P L A T E S
G P - S e r i e s U N P U N C H E D G U S S E T P L A T E S
H - S e r i e s U N I V E R S A L H E A D E R H A N G E R
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
FLOOR JOIST FRAMING CONNECTIONS 97
E a s y C l i p E - S e r i e s S U P P O R T C L I P
E a s y C l i p S - S e r i e s S U P P O R T C L I P
E a s y C l i p Q u i c kTw i s t W E B S T I F F E N E R
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
98 FLOOR JOIST FRAMING CONNECTIONS
U n i - C l i p E N D C L I P
F I E L D S K E WA B L E Tr a d e Re a d y R I M T R A C K S P L I C E P L AT E
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
ROOF AND TRUSS CONNECTIONS 99
G - S e r i e s P U N C H E D G U S S E T P L A T E S
G P - S e r i e s U N P U N C H E D G U S S E T P L A T E S
U n i - C l i p E N D C L I P
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
100 ROOF AND TRUSS CONNECTIONS
E a s y C l i p E - S e r i e s S U P P O R T C L I P
E a s y C l i p T - S e r i e s T A L L A N C H O R C L I P
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
SPECIALT Y CLIP S AND CONNEC TORS 101
R E S I L I E N T S O U N D I S O L AT I O N C L I P
M E TA L FU R R I N G C H A N N E L C L I P
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
102 SPECIALT Y CLIP S AND CONNEC TORS
CU S TO M FA B R I C AT E D C L I P S A N D CO N N E C TO R S
When the job calls for a connection, clip or support that doesnt exist in this catalog, ClarkDietrich can
create whatever you need. We can custom fabricate just about any shape, bend, angle or specialty framing
clip, connector or support to your exact specification. Manufactured using precision cutting and forming
equipment, a diverse selection of specialized sizes and shapes is availableincluding prepunched holes and/
or specialized slots. Simply submit your dimensioned drawings to your ClarkDietrich representative, and we'll
do the rest!
Note: The performance and installation of custom-made products is the sole responsibility of the design professional and
engineer of record. Any customer ordering a custom-fabricated clip, connector or support shall indemnify, defend and
hold harmless ClarkDietrich and ClarkDietrich Engineering Services for any loss or damage arising in whole or in part.
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
INDEX 103
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
104 INDEX
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
INDEX 105
M402 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 T36 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
M71A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 TC127 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
M71B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 TD12, 16, 19, 24 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
M81A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 TDHA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
M81B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 TDHB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
M859 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61, 66 TDJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
MAX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19, 42 TDSB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
MB80 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 80 TDSP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
MB90 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 80 TDW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
MFCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 101 TSA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
TSB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 51
N TSC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19, 36, 42
NOTC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 TSD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
TSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19, 36, 42
O TSF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
OTSB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 TTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
OTSC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 42 TTN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
OTSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 42 U
P U-Series . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 46, 90, 93
P00B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 UCEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89, 98, 99
P0BO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 UXRC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
P100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 V
P1BN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
P1BO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 VBAB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
P1SU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 VBCB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
P1UO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 VBKB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
P1WO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 VBSB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
P1XU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 VCJT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
P1XW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 VLAB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
P2BI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 VLCB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
P2I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 VLJB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
P20I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 VLLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
P4L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 VLMJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
PEC50/58 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 VLSB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
PGR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 VLZL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
PROS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 VVCJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
PROT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 VVJZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Q W
QTWS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50, 97 W951 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
WCJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
R WJZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
RCDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 WS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
RCDN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 X
RCSD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
RCUR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17 X-Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 90, 93
RSIC-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 101 XJ15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
XRIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
S XXCB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
S-Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52, 89, 97 XXCW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
SD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 XXZB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
SFCB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 XXZW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
SFLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44, 94 Z
SFWB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
SFZB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Z71A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
SI36 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Z71B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
SL 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Z81A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
SLW 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Z81B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
SLX 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 ZB80 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 80
SPBG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44, 94 ZB90 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 80
SPGR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 ZCJ1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
SPZD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 94 ZCJ3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
SPZS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44, 94 ZCJ5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
ZCJ7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
T ZFE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
INDEX
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
106 TRADEM ARKS AND WARRANT Y
Patents
U.S. Patent Nos. 5
,689,922; 5,784,850; GOLDLINE Trims are covered under the Deluxe, RC-Deluxe, QuickSilver, Rip Bead,
5,816,002; 6,021,618; following patents: Cornerite, Junior, Katz, C-Series, CWN,
6,070,374; 6,301,854; U.S. Patent Nos. 5,836,122 and 5,613,335 CSJ, CSW, CSE, CSS, Double-X, Corner
6,418,694; 6,688,069; Master, Mini-Bead, FastBridge and Archmaker
6,691,478; 6,691,487; Canadian Patent No. 2,212,854 are owned by ClarkDietrich Building Systems.
6,708,460; 6,761,005; Australian Patent No. 695482 DriCon is a registered trademark of
7,240,459 Arch Wood Protection, Inc.
New Zealand Patent No. 302378
Canadian Patent No. 2319346 LEED is a registered trademark of the
PLATINUM Trims (separate patent) are covered U.S. Green Building Council.
Mexican Patent No. 243294
under the following: Danback is a registered trademark
U.S. Patent No. 5,836,133 is owned by B&D of Daniel W. Tollenaar.
U.S. Patent No. 7,214,434 B2
Industries, Inc. UL and UL Design are trademarks of Underwriters
Canadian Patent No. 2,417,325 Laboratories, Inc.
U.S. Patent No. 6,705,056 is owned by Daniel
Australian Patent No. 2004202648 RSIC-1 is a registered trademark
W. Tollenaar
New Zealand Patent No. 533606 of MTEC, LLC.
U.S. Patent No. 6,267,347 is owned by Structalath, Twin Trac and V Truss are registered
MTEC, LLC trademarks of Structa Wire Corp.
U.S. Patent No. 7,882,676 is owned by Jeffery Mega Lath is a trademark of Structa
Thomas Ellis Wire Corp.
Trademarks Goldline and Platinum are registered trademarks
ClarkDietrich is a trademark of ClarkDietrich of Bailey Metal Products, Ltd.
Building Systems. USG Sheetrock is a registered trademark of USG
TradeReady, Spazzer, FastClip, EasyClip, Corporation.
Fast Top, Fast Strut, Uni-Clip, Clip
Express,SM Drop N Lock Clip, Stronger Than
Steel,SM FastBack, HDS, RedHeader RO,
QuickTwist, Slide Clip, SubmittalPro,
SwiftClip, A-Series, B-Series, D-Series,
E-Series, G-Series, GP-Series, H-Series,
L-Series, LS-Series, LE-Series, LA-
Series, S-Series, T-Series, U-Series,
X-Series, QuickClip, MaxTrak, Bar
Guard, DoubleTrack, QC-Series,
ProSTUD, ProTRAK, Contour Track,
WARRANTY
Warranty
Our products are manufactured in accordance NOTICE: Our liability is expressly limited to
with company standards and/or industry replacement of defective products. We shall
standards, as applicable. All ClarkDietrich not be liable for incidental and consequential
Building Systems products are covered by our damages, nor for any loss caused by misuse or
standard warranty which is contained in our misapplication of our products. Any claim shall
Standard Terms and Conditions of Sale and be deemed waived unless made in writing to us
which will be provided upon request. Generally, within thirty (30) days from the date it was or
we warrant our products will be free from reasonably should have been discovered.
defects in material and workmanship at the
time of shipment, subject to the limitations
stated in the warranty. Unless specifically
agreed in writing by us with respect to specific
orders, we do not make any warranty of
merchantability or fitness for a particular
purpose. The buyer is responsible to assure that
buyer orders the appropriate product for any
applicable code or specification requirements.
Pub. No. CD-Full Line 9/14 The technical content of this literature is effective 9/1/14 and supersedes all previous information. clarkdietrich.com
107
C O D E A P P R O VA L S A N D P E R F O R M A N C E S TA N D A R D S
ClarkDietrich products meet or exceed these applicable performance standards.
AISI North American Specification for the Design of Cold-Formed LEED Credit MR 2
Steel Structural Members, AISI S-100-2007 with 2010 supplement Construction Waste Management (Up to 2 points)
ClarkDietrich products are manufactured from cold-formed
ASTM American Society for Testing and Materials
steel. Steel is 100% recyclable, which helps divert debris from
Product specifications the waste stream. The contribution to LEED must be calculated
ASTM C645 Non-structural steel framing members by the contractor based on weight or volume.
ASTM C955 Load-bearing steel framing
ASTM C847 Metal lath products LEED Credit MR 4 Recycled Content (Up to 3 points)
ASTM C841/C1063 Veneer and plaster accessories ClarkDietrich Building Systems produces products with a minimum
ASTM C1047 Beads and trimsmetalpapervinyl recycled content of 34.9%, of which 24.3% is post-consumer and
9.4% is pre-consumer. These minimum values are based on resources
Material specifications from Steel Recycling Institute. If a higher content is desired,
ASTM A1003 (NS33, ST33H, ST50H)
ClarkDietrich can provide this information if mill certifications
ASTM A653 Zinc-coated hot-dip process
are requested at time of order. ClarkDietrich recycles nearly 100%
ASTM A653/B69 Veneer and plaster accessories
of its post-industrial scrap.
Protective coating standards
ASTM C645 Non-structural steel framing members ClarkDietrich Building Systems has prepared this literature with the utmost
ASTM C955 Load-bearing steel framing diligence and care for accuracy and conformance to standards.
ASTM A653 Zinc-coated hot-dip process ClarkDietrich intends this information to be accurate, informative, and helpful
ASTM C1063 Veneer and plaster accessories as a selection guide for choosing ClarkDietrich Building System products.
ASTM C1047 Beads and trimsmetalpapervinyl However, this information is only to be used for guidance and is not intended
to replace the design, drawings, specifications, and decisions of a professional
architect or engineer.
LOCATIONS
clarkdietrich.com The technical content of this literature is effective 9/1/14 and supersedes all previous information. Pub. No. CD-Full Line 9/14
Turn to ClarkDietrich for a complete lineup of steel construction products and services nationwide:
Interior Framing Exterior Framing Interior Finishing Clips/Connectors Metal Lath/Accessories Engineering
CD-Full Line 9/14 9/14 ClarkDietrich Building Systems. The technical content of this literature is effective 9/1/14 and supersedes all previous information.