Beruflich Dokumente
Kultur Dokumente
It is the most suitable cement for Infrastructure Projects because of its high flexural strength.
Maximum strength, low risk of cracking, improved workability, and superior finish are the advantages of
PSC.
Portland Slag Cement (PSC) is manufactured by either inter-grinding in the Portland cement
clinker, Gypsum & Granulated Slag or blending the Ground Granulated Blast Furnace Slag (GGBS)
with Ordinary Portland Cement by means of mechanical blenders.
It is created with a combination of 45- 50% slag, 45% 50% clinker, and 3-5% gypsum. PSC has
been voted as the most suitable cement for concrete pavements, mass concrete applications,
high performance or high strength concrete, structures and foundations, pre-cast concrete such
as pipe & block, concrete exposed to sea water and marine application.
Slag is, essentially, a non-metallic product comprising of more than 90% glass with silicates and
alumino-silicates of lime.
Improved workability
Superior finish
Ease of pumping
Portland Slag Cement (PSC) is manufactured by either inter-grinding in the Portland cement
clinker, Gypsum & Granulated Slag or blending the Ground Granulated Blast Furnace Slag
(GGBS) with Ordinary Portland Cement by means of mechanical blenders. It is created with a
combination of 45- 50% slag, 45% 50% clinker, and 3-5% gypsum. The cement production is
PSC has been voted as the most suitable cement for mass construction because of its low heat of
hydration. It is the most suitable cement for Infrastructure Projects because of its high flexural
strength.
PSC is widely used for concrete pavements, mass concrete applications, high performance or high
strength concrete, structures and foundations, pre-cast concrete such as pipe & block, concrete
Maximum strength, low risk of cracking, improved workability, and superior finish are the
advantages of PSC.
Advantages of PSC
PSCs inherent chemistry gives it several advantages over ordinary cement. Apart from being
Improved workability
Cost is less
Eco-friendlyThe main advantage is that the amount of energy needed to produce a kilo gram of
slag cement is much less than for ordinary Portland cement because the slag is essentially a waste
material
ADVANTAGES :
Ample research work is present to support advantages listed below. If you want to know the
chemistry, then message me.
1. As GGBS is an industrial waste, using it in slag cement reduces it's impact on environment.
2. Slag cement is cheaper than ordinary cement.
3. Slag cement is less reactive than opc. It provides resistant against chemical attacks. Hence
durability of concrete is enhanced.
4. Slag cement is corrosion resistant.
5. Particle size of ggbs is smaller than cement. Therefore, slag cement provide smooth finished
surface.
6. Ggbs in slag cement contributes in later age strength (28 days).
Properties of slag cement depends on many factors like proportion of ggbs, temperature control of
clinkers, particle size distribution of ggbs, iron ore from which slag is obtained.
Here is IS CODES for slag cement:
IS 455:1989 Specification for Portland slag cement
IS 12089:1987 Specification for granulated slag for manufacture of Portland slag cement
which can be used beneficially in making cement. So, slag cement is environmentall