Beruflich Dokumente
Kultur Dokumente
Description The R1Z series DC/DC converter has been designed for isolating or converting DC power rails
where an SMD format with regulated output is required, although it is no larger than a
standard unregulated SMD converter.
Selection Guide
Part Input Output Output Max 1 Watt SMD
Number Voltage Voltage Current Capacitive
SMD
R1Z-xx3.3*
2kVDC
(/H)
(VDC)
3.3, 5, 12, 15, 24
(VDC)
3.3
(mA)
303
Load(1)
2200F
Miniature
R1Z-xx05* (/H) 3.3, 5, 12, 15, 24 5 200 1200F Isolated
R1Z-xx09* (/H) 3.3, 5, 12, 15, 24 9 111 680F
R1Z-xx12* (/H) 3.3, 5, 12, 15, 24 12 84 680F Single Output
R1Z-xx15* (/H) 3.3, 5, 12, 15, 24 15 66 470F
xx= Input Voltage (other input and output voltage combinations available on request
*add suffix -R for tape & reel packing e.g. R1Z-0505-R
*add suffix /P for continuous short circuit protection, e.g. R1Z-0505/P-R
Specifications (measured at TA = 25C, nominal input voltage, full load and after warm-up)
Input Voltage Range 5%
Output Voltage Accuracy 2% RoHS
2011/65/EU
Line Voltage Regulation 1% max. E358085 6/6
Load Voltage Regulation 1% max.
Output Ripple and Noise (at 20MHz BW) 100mVp-p max. EN-60950-1 Certified
Operating Frequency 20kHz min. / 40kHz typ. / 80kHz max. EN-60601-1 Certified*
Efficiency at Full Load 50% min. / 60% typ. UL-60950-1 Certified
Minimum Load 10% (2) (*/H suffix)
No Load Power Consumption 134mW min. / 217mW typ. / 350mW max.
Isolation Voltage (tested for 1 second) 1000VDC
40 40 40
3.312 1212
Efficiency %
Efficiency %
0512
Efficiency %
3.315 1215
20 20 20
0515
0 0 0
0% 20% 40% 60% 80% 100% 0% 20% 40% 60% 80% 100% 0% 20% 40% 60% 80% 100%
Total Output current (%) Total Output current (%) Total Output current (%)
R1Z-15xx/P
Efficiency / Load
R1Z-3.3xx
Efficiency / Load
R1Z-05xx
Efficiency / Load
100 100 100
2405
3.312 80
80 80
243.3 3.33.3 0515 0512
053.3
60 60 60
2415 40
40 40
2412 0505
Efficiency %
Efficiency %
3.305
Efficiency %
3.315 20
20 20
0 0 0
0% 20% 40% 60% 80% 100% 0% 20% 40% 60% 80% 100% 0% 20% 40% 60% 80% 100%
Total Output current (%) Total Output current (%) Total Output current (%)
R1Z-12xx
Efficiency / Load
Notes
Note 1: Maximum capacitive load is defined as the
R1Z-15xx
Efficiency / Load
100 100
capacitive load that will allow start up in under 2415
123.3
80 1second without damage to the converter 80
1205
R1Z/P
2405
60 Note 2: The R1Z series requires a minimum of 10% 60
Efficiency %
1215 243.3
20 regulation. Operating under no-load conditions 20
0
will not damage these devices; however, they 0
0% 20% 40% 60% 80% 100% may not meet all listed specifications. 0% 20% 40% 60% 80% 100%
Total Output current (%) Total Output current (%)