Beruflich Dokumente
Kultur Dokumente
Oxford Instruments
Analytical
CMI900 Au
Ni
SnPb
Ni
Sn
Ni Ag
UK Cu Cu Ag Cu
Halifax Road, High Wycombe Cost effective, high performance XRF for Epoxy Epoxy Ceramic Epoxy
Bucks, HP12 3SE England
the measurement of coating thickness
Electronics
Tel: +44 (0) 1494 442255
Fax: +44 (0) 1494 461033 and material composition Solderability
Email: analytical@oxinst.co.uk
Australia Au
Sydney, N.S.W. 1715 Au PdNi
Tel: +61 2 9484 6108 Ni Ni Ni
Fax: +61 2 9484 1667
Cu-alloy Cu Cu
Email: sales@oxinst.com.au
Germany
Wiesbaden
Cr
Tel: +49 (0) 6122 937 176
Fax: +49 (0) 6122 937 178
ZnFe Zn NiP
Fe Fe Fe
Metal Finishing
Email: analytical@oxford.de
click onto www.oxford-instruments.com for more information
Japan Corrosion resistance
Tokyo
Oxford Instruments, at High Wycombe, UK, operates Quality Management Systems approved to the requirements of BS EN ISO 9001. This publication is the
Measurement Systems
Elk Grove Village IL
Cosmetic finish
copyright of Oxford Instruments Analytical Limited and provides outline information only which (unless agreed by the company in writing) may not be used,
applied or reproduced for any purpose or form part of any order or contract or be regarded as a representation relating to the products or services concerned.
Oxford Instruments policy is one of continued improvement. The company reserves the right to alter, without notice, the specification, design or conditions of Tel: +1 847 439 4404
Sorting
supply of any product or service. Oxford Instruments acknowledges all trade marks and registrations.
Fax: +1 847 439 4425 %Au %Cr %Au
Alloy
Oxford Instruments Analytical Ltd, 2004. All rights reserved. Part no: OIA/098/A/0704 Email: sales@msys.oxinst.com
%Ni %Fe %Ag
%Cu %Ni %Cu
%Zn %Mo %Zn
Solderability
Au
Au PdNi
Ni Ni Ni
Cu-alloy Cu Cu
Electrical contact
NiP
Al
Surface finish
Cr
ZnFe Zn NiP
Fe Fe Fe
Metal Finishing
Corrosion resistance
TiN TiAlN Cr
Tool-steel W-carbide Fe
Wear/heat resistance
Cr
Ni Ni AuCuCd
ZrCN Cu Cu Ni
Brass Al Zn Cu
Cosmetic finish
Sorting
Assay and ID
CMI900 from Oxford Instruments for analysis of: Multi-layer Coating Thickness & Composition Alloy ID & Chemistry Plating Solution
Oxford Instruments CMI900 High performance Innovative Table options Easy System Calibration
proven XRF expertise worldwide XRF spectrometer
What is X-Ray technology FP method reduces the number of
standards required
System is delivered pre-loaded with
35 years XRF experience Fluorescence? Accuracy
Programmable
over 800 application
25 years in coating Empirical calibrations highest accuracy 50 Watt Micro-Focus X-Ray Tube Fixed Base parameters/methods
Base Simple steps to add new calibrations
measurement Fluorescence is a FP Model easy calibrations
15 years in XRF coating process in which an Certified Standards ensures traceability
thickness measurement atom or a molecule A2LA approved lab guaranteed integrity
world-wide sales and absorbs a photon of
Re-certification of Standards service
support network certain energy and
commitment Table position is fixed This package
releases another provides users
extensive portfolio of Increased count rate, improved Economical and
with automatic
photon of lower precision practical
analytical instrumentation Precision and
energy 75 Watt upgrade This flat base assembly programmable Advanced System Security
Laser Focus repeatable sample provides a platform control of parts
ideally suited for parts being analyzed Simple user interface with limited
presentation that do not exceed
Using either a features for the routine operator
How does the CMI900 High Countrate good precision
1.30 (33 mm) in
height mouse or a Manager level access for system
Multi-Collimators joystick, the maintenance
use fluorescence? 75 Watt upgrade best precision Each of the three base
options is slotted to
user can easily
navigate the
System usage logged by operator
accommodate table to
X-Ray tube provides oversized samples such position the
Long-term Stability as large PCBs part being
bombardment of excitation X-Ray
Thermal compensation measures the X-Ray X-Ray inspected to
tube
tube
photons to the sample system temperature and corrects for
beam
Collimator
the precise
point the user
Detector measures the Sample Mini Well
changes that could cause drift wants to Flexible Report Generator
measure
secondary, or fluoresced Detector Spec-Cal single click of the mouse will Improved application capability Creates custom report formats
Standard table
X-Rays Optimize the balance between count size is 22"
check the system performance and self- rate and spot sizes
Applies custom statistical analysis
(56mm) (D) x formats
The X-Rays intensity correct, if necessary Various size of round and rectangular 24" (60mm) Captures the sample image in reports
determines the thickness collimators are available Can be used to (W).
Up to 6 collimators can be installed accommodate parts Travel is 7" x 7"
and/or composition that are too tall to (152.4 mm) x
measure with the fixed (177.8 mm)
base platform
Australia
Sydney, N.S.W. 1715
Tel: +61 2 9484 6108
Fax: +61 2 9484 1667
Email: sales@oxinst.com.au
China
Beijing
Tel: (8610) 6518 8160/1/2
Fax: (8610) 6518 8155
Email: oiadmin@oxford-instruments.com.cn
France
Saclay, Cedex
Tel: +33 (0) 1 69 85 25 24
Fax: +33 (0) 1 69 41 86 80
Email: analytical-info@oxford-instruments.fr
Germany
Wiesbaden
Tel: +49 (0) 6122 937 176
Fax: +49 (0) 6122 937 178
Email: analytical@oxford.de
click onto www.oxford-instruments.com for more information
Japan
Tokyo
success. We recognise that this by experienced analysts in 10 Tel: +1 727 538 7702
Fax +1 727 538 4205
requires world class products regional offices and 7 fully Email: oxford@gate.net
complemented by world class equipped applications
support. laboratories, we can offer Singapore
unrivalled support, wherever Tel: +65 6337 6848
With a comprehensive training Fax: +65 6337 6386
you are.
agenda for technical engineers Email: analytical.sales@
oxford-instruments.com.sg
and end users combined with a
USA - Oxford Instruments
Measurement Systems
Oxford Instruments, at High Wycombe, UK, operates Quality Management Systems approved to the requirements of BS EN ISO 9001. This publication is the
copyright of Oxford Instruments Analytical Limited and provides outline information only which (unless agreed by the company in writing) may not be used, Elk Grove Village IL
applied or reproduced for any purpose or form part of any order or contract or be regarded as a representation relating to the products or services concerned.
Oxford Instruments policy is one of continued improvement. The company reserves the right to alter, without notice, the specification, design or conditions of Tel: +1 847 439 4404
supply of any product or service. Oxford Instruments acknowledges all trade marks and registrations.
Fax: +1 847 439 4425
Oxford Instruments Analytical Ltd, 2004. All rights reserved. Part no: OIA/098/A/0704 Email: sales@msys.oxinst.com
Certificate No FM29142