Beruflich Dokumente
Kultur Dokumente
WAH CANTT
UNDERGRADUATE RESEARCH PROPOSAL
EMAIL jahanzaibmarwat1994@gmail.com
1.1 INTRODUCTION
2. A two-stroke diesel engine is a diesel engine that works in two strokes. A diesel engine is an
internal combustion engine that operates using the Diesel cycle. Invented in 1892 by German
engineer Rudolf Diesel. All diesel engines use compression ignition, a process by which fuel is
injected after the air is compressed in the combustion chamber, thereby causing the fuel to self-
ignite.
3. Intake begins when the piston is near the bottom dead center. Air is admitted to the cylinder
through ports in the cylinder wall. All two-stroke Diesel engines require artificial aspiration to
operate, and will either use a mechanically driven blower or a turbo-compressor to charge the
cylinder with air.
4. As the piston rises, the intake charge of air is compressed. Near top dead center, fuel is injected,
resulting in combustion due to the charge's extremely high pressure and heat created by
compression, which drives the piston downward. As the piston moves downward in the cylinder,
it will reach a point where the exhaust port is opened to expel the high-pressure combustion
gasses.
5. Turbo-diesel, also refers to any diesel engine equipped with a turbocharger. Turbocharging is
common in modern car and truck diesel engines to produce higher power outputs, lower
emissions levels, and improved efficiency from a similar capacity of engine. Turbo-diesels in
automobiles offer a higher refinement level than their naturally aspirated counterparts.
Two Stroke Diesel Engine Turbocharger
stoichiometric requirement for complete combustion.The main aim of involving turbocharger in two
stroke diesel engines is to increase power obtaining more fuel efficiency,controlling emission levels
and finally gives more output.
SCHEDULE PLAN:
Literature Review
Phase 1
Phase 2
Phase 3
Thesis Write up
Submission
Two Stroke Diesel Engine Turbocharger
Approval by Chairman
Remarks: