Beruflich Dokumente
Kultur Dokumente
Equipment required:
NOTE: Windows Vista is incompatible with this procedure. For assistance in configuring the
Ethernet Connection between the PC and Marksman Duo, See Appendix E:
Configuring a PC to Communicate with the Controller in the SoloSeries Operators
manual Part Number 5780-329.
This procedure assumes that you have successfully booted the computer and exited any programs that
are running.
1. Navigate to the directory in which you placed the Marksman Duo Firmware Update software.
Double-click on the installation package.
NOTE: If you downloaded the Marksman Duo update software off the FoxJet website, it is
likely named v5-2-0905121045.zip or similar. Simply double-click the zip file which will
display the setup file, v5-2-0905121045.exe or similar. Double Click on this exe to
start the installation.
5. Next the software will begin installing the firmware. You will first see a green completion bar as the
installation identifies and build the correct files to load. Then, a command prompt window will
appear and begin sending the firmware to the controller. Shortly after this, Windows XP will likely
present a security alert indicating that bootp is trying to execute. You MUST click unblock to
continue.