Beruflich Dokumente
Kultur Dokumente
If the port is down and offline, use the no shutdown command to bring the port
online.
config t
interface fc 3/17
no shutdown
http://www.cisco.com/en/US/tech/tk389/tk214/technologies_tech_note09186a0080176720.
shtml#conn
http://www.cisco.com/E-
Learning/bulk/public/tac/cim/cib/using_cisco_ios_software/cmdrefs/cmdref_frameset.h
tm
http://www.cisco.com/E-
Learning/bulk/public/tac/cim/cib/using_cisco_ios_software/07_basic_commands_tasks.h
tm
http://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_2_x/troubleshoo
ting/guide/ts_port.html
http://www.youtube.com/watch?v=IcUo4GGeE40
http://www.pantz.org/software/ios/ioscommands.html
General commands
sh platform ...
sh platform tcam utilization - a place in the TCAM
sh controllers cpu-interface
sh controllers utilization - the percentage loading of interfaces. Plus upload the
switch factory
sh controllers tcam
sh controllers tcam asic
sh controllers ethernet-controller phy
sh controllers ethernet-controller port-asic statistics
sh controllers ethernet-controller port-asic configuration
sh controllers ethernet-controller gigabitEthernet 1/0/1
Interface Commands
SDM
sh sdm prefer
CDP
Multicast
sh ip multicast
sh ip multicast interface vlan 104
sh ip interface vlan 104
PIM troubleshooting
sh ip mroute
sh ip pim interface
sh ip pim rp [mapping]
sh ip rpf
sh ip pim interface vlan 25
sh ip pim neighbor
IGMP troubleshooting
sh ip igmp
sh ip igmp group
sh ip igmp interface
ip igmp join-group