Beruflich Dokumente
Kultur Dokumente
com
ISO9001 International Quality Certificate
WDW-E Series is a new kind of electronic universal testing machine produced by TIME-Shijin Group, which adopts the most
advanced and reliable ball screw electric mechanical load frame structure. The driving system adopts AC servo timing system
and motor from Panasonic Co.Ltd.of Japan. The PC controlling system is able to realize the close-loop control of the
parameters such as loading force, specimen deformation, and crosshead stroke etc. The system realizes the screen display,
online diagram drawing, testing curve changing, pile curve collation and auto analysis of test results, creation of test report.
Especially, the application of the control mode can be manual control or computer programming control which makes the
cyclic tests become available. By switching simply of different accessories, WDW series Universal testing machine can make
tests on most of materials and components to suit your needs.
Standards:
In accordance with or exceed the requirements of the following standards: ISO 7500-1, ASTM E4, EN10002-2, BS 1610,
DIN 51221, ISO6892.
Mainframe: The machine adopt double space door type structure. High accuracy, wide range and stable Japan Panasonic
AC servo motor drive the ball screw pair rotating through syn-deceleration system. The ball screw pair drives the middle
crosshead and makes the tension/compression/ bending attachment moves up and down to realize the load and offload to
the specimen. This structure has enough stiffness to apply high efficiency and stable moving. Key parts are processed on our
own processing center to ensure the accuracy of the load frame. Ball screw is E5 class.
Electric part:
(1) Adopt stable and reliable Japan Panasonic AC servo driving system and servo motor, with the protection device of over
current, over voltage Speeding and overload. The adjustable rate can up to 1:100000
(2) With the protective function of overload, over current, over voltage, displacement upper and lower limitation and
emergency stop.
(3) The electric circuit is referred to international standard and conformed to national testing machine electric standard, high
an excellent performance on the anti-jamming test to ensure the stability of controller and
accuracy of test data.
Features
Complete computer controlled: The whole measuring and controlling system adopts specific PC control card
used for testing machines, realizing the data zero and plus adjustment, which has very high reliability.
Supporting multi-transducers
Realizing the database management of the test data which are stored according to the standard format;
facilitating other software to analyze and transfer.
Perfect programming by auto program control, every control mode can smoothly shift to another one.
Fulfilling the test requirement of all kinds of materials with every test standard home and abroad.
Control software has the auto-adjusting function of test hardness, which assures that the system works with
every kind of specimen hardness.
Perfect graphic function realizing the arbitrarily magnifying, decreasing, equaling, adding, indicative display and
print of all kinds of test curves, the test point searching as well as the simultaneous display and print of several
kinds of test curves. Data processing supposes self-disposing and input disposing of graphic human computer
interaction, which facilitates the check and contrast of the test result.
The user can self -define the output of the test report, which makes the report format have very high flexibility.
Modularization design facilitates the software upgrading, function spreading as well as the second development.
All the crucial parts were processed by our owen processing center which was imported from Japan to guarantee
the high accuracy of machine.
Specifications WDW-300E
Machine stiffness (Kn/mm) 600
Accuracy : 0.5%
Max. capacity (KN) : 300
Measuring range : 0.4%-100% of FS
Relative error of reading : 1%
Resolution of load : 1/200000 of max. test load
Resolution of displacement(mm) : 0.001
Moving speed range(mm/min) : 0.005-500, stepless
Relative error of moving speed : 1%
Resolution of moving speed control : <1%mm/min: 1%
Gauge of standard extensometer(mm) : 50
Max. deformation measuring(mm) : 10
Deformation measuring range(mm) : 2%-100% of max. deformation
Relative error of deformation reading : 1%
Accuracy of deformation measuring : 0.5% (within 2%-100% of max. extensometer range)
Long travel extensometer measuring range (mm) : 10~800 (Need to be ordered separately)
Accuracy of long travel extensometer value : 0.5%
Tension space(mm) : 600
Compression space(mm) : 600
Max. crosshead travel(mm) : 1350
Width of test space(mm) : 600
Resolution of ball screw : 16m/300mm E Class
Load frame dimensions(mm) : 1100*770*2685 (L x W x H)
Load frame net weight(Kg) : 1560
Load frame type : Door type
Load frame power : 5KW, AC380V10%, 3 phases 4 lines
Working condition Ambient temperature: 10~35
Humidity:20%-80%
Software Introductions
for Electronic UTM
TIME-SHIJIN controller
Plug In ready to use PCI control card, suits all kinds of personal computer and main board. Full digital
measure and control circuit. Provided with Load, displacement & Deformation different measuring channel.
Close loop control by simply software configuration.
Displacement display
Testing time display
Software Introduction
5. Manual or Program control of test process
WinWDW Software provides multi functional control mode: Stroke & Program.
In stoke control mode, operator can defined customize
Stroke control
Programmable control
allows the user to make a multi-
step program control file
according to programming
regulation and the users
requirement.
Test speed adjusting
Software Introductions
7. Curve switch menu 8. RP 0.2 curve displaying
The user can choose observing curve type according to requirements.
High intensity testing machine structure and crosshead, high stiffness to assure accuracy;
Clamping jaws
Jaws for round specimen: 9- 14mm, 14- 20mm, 20- 26mm Each 1 set
Diameter: 120mm
Span: 500mm
Roller: 30mm
Deformation: 10mm)
Photoelectric encoder 1 pc
2000 wires
Transformer 1 pc
Load cell 1 pc
Capacity: 300KN
Brand: Celtron or Trancell
Computer desk
Package Information
ITEMS DETAILS
Content Load Frame
Wooden Case 01 G/N Weight 2200/1560Kg
Dimension 310014301420 mm
CBM 6.29m3
Content Control Part
Wooden Case 02 G/N Weight 1200/1000Kg
Dimension 200010501080 mm
CBM 8.56m3
Total Two Wooden Cases <Be suitable for export delivery.>
Total 3400Kg 14.85m3
*The above weights & dimensions are just for your reference.
The final value should be subject to the delivery.