Beruflich Dokumente
Kultur Dokumente
(4)
Two inductors of values L1 and L2 are coupled by a mutual inductance M. By inter
connection of the two elements, one can obtain a maximum inductance of
A L1+ L2 -M B L1+ L2 C L1+ L2+M D L1+ L2+2M
(6)
A differential amplifier has a differential gain of 20,000, CMRR=80 dB. The common
mode gain is given by
A 2 B 1 C 0.5 D0
(9) Following motor is used where high starting torque and wide speed range control is
required.
A Single phase B Induction motor C Synchronous D D.C. motor
capacitor start motor
1 of 5
EPP Composites Pvt. Ltd.
(25) Which one of the following relays has the capability of anticipating the possible major
fault in a transformer
A Over current relay B Differential relay C Buchholz relay D Over fluxing relay
2 of 5
EPP Composites Pvt. Ltd.
(28)
Lightning arresters are made up of which material?
(34)
Which one of the following is not a vectored interrupt?
(40) If the speed of a D.C. shunt motor is increased, the back e.m.f. of the motor will
A Increase B Decrease C Remain same D Become zero
3 of 5
EPP Composites Pvt. Ltd.
(42) A 160 W soldering iron is operated from the 60 Hz power line. The resistance of the
soldering iron is
A 10 ohms B 51.5 ohms C 25.5 ohms D 75.6 ohms
4 of 5
EPP Composites Pvt. Ltd.
(3) Why should EPP hire you from the outside as an engineer, when we could promote
someone else within ?
5 of 5