Beruflich Dokumente
Kultur Dokumente
When there is break down in the air condition unit write it down in
corrective maintenance logbook and contact the management of the laboratory.
They will be the one to contact the licensed company. They will check the
following:
1. Blown fuses: Found in the evaporator coil, fuses protect the unit
against overheating of the motors and compressor.
2. Worn contactor: There are three contactors in a unit: One for the
compressor, one for the condenser fan motor, and one for the blower motor. When
a call for cooling or heating is placed the contactors engaged, making an electrical
connection starting the compressor and motors.
3. Capacitors: the capacitor is used to help the motor of a consistent
speed, rated in microfarads.
4. Filters, Filters will always get the dirty and clogged from air
particles.
5. Thermostat: This is the device that controls the system, telling it
what to do and when to do it.
6. Condenser coil. These are always located outside with the
compressor they are exposed to the outdoor elements, so they often get dirty and
done should be clean yearly.
7. Evaporated coil. On Spilt systems the evaporator coil is located in
the attic, but on a package unit is located outside with rest of the unit.
8. Compressor: This is the heart of the A/C unit. The compressor is
always located with the condenser coil.