Beruflich Dokumente
Kultur Dokumente
Averaging With this type of Film Clamps These spring Breakaway Release This option is ideal for measuring strain on
extensometer, knife edges are activated clamps allow precise samples with brittle characteristics that may cause premature failure.
placed on opposite sides of the strain measurement of thin It typically requires the use of a counterbalance to support the
specimen to provide an average materials up to 3mm/0.125in extensometer and is available for both averaging and non-averaging
amount of strain between the thick, including plastics and foils, type extensometers.
two gauge points. without marring the specimen.
This option is only available for
non-averaging extensometers
and typically requires the use of
a counterbalance to support the
extensometer.
Sheet Metal Attachment This Extension Bracket This Pneumatic Release This Counterbalance Support
option allows the extensometer option allows the extensometer option is combined with a swing- This option is used to support
to accommodate thin, flat to be used with samples that are away support and allows the the extensometer and is
specimens. Note that this thicker than maximum opening remote release of the commonly used when the
option is only available for non- of 16mm/0.625in on the extensometer from the sample. extensometer is attached to
averaging extensometers and standard model. There are three small or fragile samples.
typically requires the use of a versions where an extension
counterbalance to support the bracket allows the extensometer
extensometer. to be mounted on samples that
are 25mm/1in, 50mm/2in or
75mm/3in thick. This option is
only available for non-averaging
extensometers.