Beruflich Dokumente
Kultur Dokumente
Note: Answer any five full questions. Each Question carry 6 marks
Note: Answer any five full questions. Each Question carry 6 marks
1. Differentiate between Determinate and Indeterminate structures.
2. Analyse the continuous beam if the support B sinks by 10mm.Take EI = 2x104KNmm2.
40KN 10KN/m
B
A C
3m 2m 6m
I 2I
3. Find the support reactions and draw the SFD and BMD for the above figure.
4. Analyse the beam shown below and draw SFD and BMD.
20KN 30KN
1m 3m 2m 2m
2I I
6. Write notes on (A) Ranging rod (B) Arrows (C) Peg
7. Two stations P and Q on the main survey line were taken on the opposite sides of the
pond. On the right of PQ, a line PR 210m long was laid down and another line PS, 260m
long was laid down on the left of PQ. The points R, Q and S are on the same straight line.
The measured length of RQ and QS are 85m and 75m respectively. Compute the length
of PQ.
8. A rectangular plot was measured with a 20m chain which was 12cm too long. The area
obtained was117600m. Find the true area of the plot.
40KN/m
B
C
fig. 2 6m, 2I
4m I I
A B
5. Analyse the frame shown in the figure 2 and draw BMD.
6. Derive the Slope Deflection equation.
7. Analyse the frame by slope deflection method and draw BMD.
40KN
20KN/m
6m 2m 2m
2I I
2I 4m
8. Write the assumptions of slope deflection method and the sign conventions for each.