Beruflich Dokumente
Kultur Dokumente
ARCHITECTURAL COATINGS
TOUCHWOOD
www.asianpaints.com/oman AC Clear Lacquer
PRODUCT DESCRIPTION
BERGER Touchwood Acid Curing Lacquer is a two pack acid curing premium quality melamine's coating specially
formulated as a protective and decorative coating for wood for interiors. It protects the wood for many years. The product
has excellent resistance to mechanical scratches, staining from oils, foods and hot beverages. It offers substantial economy
in terms of durability, decorative and protective value, compared to other conventional coatings.
This product is also approved by FIRA for use on interior furnitures.
TECHNICAL DATA
Shade / Colour Range : Gloss, Silkmatt, Matt & Deadmatt
Solvent Resistance : Good resistance to aliphatic, aromatic hydrocarbons & polar solvents.
Composition Nominal : Acid catalysed Alkyd / Amino system
Specific gravity : 1.02 0.05
% Volume solids : 40 2 %
Mixing ratio : 9:1 parts by volume (Base : Hardener)
Maturation time : 10 - 15 mins.
Pot Life : 8 hrs. at 30C
Viscosity of supply : 75-100 sec
Gloss level at 60 head : Gloss : 80 minimum Silkmatt : 30 - 40
Matt : 10 -15 Deadmatt : 5-7
Pack Size : 1 USG, 5 USG
Theoretical Coverage Capacity : 12.6 - 14 Sqm / Ltr @ 30 DFT
Practical coverage : Practical coverage may depend on surface profile, method of application and weather conditions.
APPLICATION DATA
Method of Application : Spray at an optimal spray pressure of 30-40 psi (2.2-2.8 kg/cm )
2
SURFACE PREPARATION
Sand the Wooden surface with 180 Emery paper, followed by 320 Emery paper, dust off, remove all grease, loose flaking
paint etc.
* For detailed system recommendation based on specific requirements please contact Berger representative.
DISCLAIMER
The information provided in this data sheet is not intended to be complete. It is the responsibility of the user to ensure that the product used is suitable for the purpose it is meant to serve.
In view of various factors affecting the performance of the coating, we cannot assume responsibility for the product performance, nor do we accept any liability arising from use of this
product, unless specifcally agreed to in writing by us. The information provided in the datasheet may be modifed by us without notice.
This Technical Data Sheet supersedes those previously issued with immediate effect.
Version: 02/2007