Beruflich Dokumente
Kultur Dokumente
TABLE OF CONTENTS
1 General 1
1.1 Scope 1
1.2 Reference................................................................................................................................. 1
1.3 Definition.................................................................................................................................. 1
2 Accessibility............................................................................................................................... 2
2.1 Attach Success Rate................................................................................................................ 2
2.2 Detach Success Rate............................................................................................................... 2
2.3 Paging Success Rate............................................................................................................... 3
2.4 RRC Establishment Success Rate...........................................................................................4
2.5 RRC Re-Establishment Success Rate.....................................................................................5
2.6 Initial E-RAB Setup Success Rate...........................................................................................6
2.7 Added E-RAB Setup Success Rate......................................................................................... 7
2.8 E-RAB Setup Success Rate..................................................................................................... 8
2.9 E-RAB Modify Success Rate.................................................................................................... 9
2.10 E-RAB Block Rate................................................................................................................ 10
2.11 E-RAB Block Rate Per QCI.................................................................................................. 11
2.12 S1-Sig Establishment Success Rate....................................................................................13
2.13 UE Context Establishment Success Rate............................................................................14
2.14 Initial E-RAB Accessibility ................................................................................................... 15
2.15 Added E-RAB Accessibility ................................................................................................. 16
3 Retainability.............................................................................................................................. 17
3.1 RRC Drop Rate...................................................................................................................... 17
3.2 E-RAB Drop Rate................................................................................................................... 18
3.3 E-RAB Drop Rate per QCI..................................................................................................... 19
3.4 Active E-RAB Drop Rate........................................................................................................ 20
4 Mobility 21
4.1 Intra-eNB Intra-freq................................................................................................................ 21
4.2 Inter-eNB Intra-freq................................................................................................................ 30
4.3 Intra-eNB Inter-freq................................................................................................................ 49
4.4 Inter-eNB Inter-freq................................................................................................................ 58
4.5 HO E-RAB Block Rate........................................................................................................... 77
4.6 HO E-RAB Block Rate Per QCI.............................................................................................. 78
4.7 Intra-RAT HO Control Plane Interruption Time.......................................................................80
4.8 Intra-RAT HO Applicative Interruption Time...........................................................................81
5 Integrity 82
5.1 Attach Time............................................................................................................................ 82
5.2 Detach Time........................................................................................................................... 83
5.3 U-Plane Latency..................................................................................................................... 83
5.4 C-Plane Latency..................................................................................................................... 84
5.5 Paging Success Time............................................................................................................ 85
5.6 Peak DL Cell Throughput....................................................................................................... 86
5.7 Peak UL Cell Throughput....................................................................................................... 86
5.8 Average DL Cell Throughput.................................................................................................. 87
5.9 Average UL Cell Throughput.................................................................................................. 88
6 Availability................................................................................................................................ 89
6.1 Cell Availability....................................................................................................................... 89
7 Traffic 89
7.1 Maximum RRC-Connected User Number..............................................................................89
7.2 Mean RRC-Connected User Number.....................................................................................90
7.3 Average User Number per QCI.............................................................................................. 91
7.4 Maximum Active User Number on the DL per QCI.................................................................92
7.5 Mean Active User Number on the DL per QCI.......................................................................93
7.6 Maximum Active User Number on the UL per QCI.................................................................94
7.7 Mean Active User Number on the UL per QCI.......................................................................95
7.8 Average DL Cell PDCP Throughput.......................................................................................96
7.9 Maximum DL Cell PDCP Throughput.....................................................................................97
7.10 Minimum DL Cell PDCP Throughput....................................................................................97
7.11 Average UL Cell PDCP Throughput.....................................................................................98
7.12 Maximum UL Cell PDCP Throughput...................................................................................99
7.13 Minimum UL Cell PDCP Throughput....................................................................................99
7.14 Average DL Cell RLC Throughput......................................................................................100
7.15 Maximum DL Cell RLC Throughput...................................................................................101
7.16 Minimum DL Cell RLC Throughput....................................................................................101
7.17 Average UL Cell RLC Throughput......................................................................................102
7.18 Maximum UL Cell RLC Throughput...................................................................................103
7.19 Minimum UL Cell RLC Throughput....................................................................................103
7.20 Average DL Cell MAC Throughput.....................................................................................104
7.21 Maximum DL Cell MAC Throughput...................................................................................105
7.22 Minimum DL Cell MAC Throughput....................................................................................105
7.23 Average UL Cell MAC Throughput.....................................................................................106
7.24 Maximum UL Cell MAC Throughput...................................................................................107
7.25 Minimum UL Cell MAC Throughput....................................................................................107
7.26 UL Cell BLER after Retransmission...................................................................................108
7.27 DL Cell BLER after Retransmission...................................................................................109
8 Transport110
8.1 Outgoing U-PlaneTransport Throughput (V2.0 Only)...........................................................110
8.2 Incoming U-PlaneTransport Throughput (V2.0 Only)...........................................................110
8.3 Total Outgoing Transport Throughput .................................................................................111
8.4 Total Incoming Transport Throughput .................................................................................112
8.5 UL S1 Transport Throughput ............................................................................................... 112
8.6 DL S1 Transport Throughput ............................................................................................... 113
8.7 Outgoing X2 Transport Throughput .....................................................................................114
8.8 Incoming X2 Transport Throughput .....................................................................................114
ZTE Confidential Proprietary 2013 ZTE Corporation. All rights reserved. III
ZTE LTE-FDD Key Performance Indicator Reference
1 General
1.1 Scope
This document provides KPI definitions applicable for the measurements of network performance,
traffic, end-user experience and resource usage, from E-UTRAN point of view.
1.2 Reference
[1] ZTE LTE-FDD Performance Counter Reference.doc
1.3 Definition
Key Performance Indicator (KPI) are high level metrics, i.e. formula consisting of a combination of
raw counters or an aggregation of statistics on the end to end communication, giving general
information on system resource usage, traffic, end user experience and network performance. They
are usually used as a first indication whether the system is highly loaded, or there are any potential
performance issues, after which the operator can use the underlying raw counters or tracing tool for
deep drill-down analysis.
Object: cell
Unit: Percentage
Type: Ratio
Counters mentioned in this document have the format as below, which can be found in [1]:
2 Accessibility
2.1.1 Description
Object: cell
Unit: Percentage
Type: Ratio
2.2.1 Description
Object: cell
Unit: Percentage
Type: Ratio
2.3.1 Description
The KPI shows probability for an end-user to successfully respond to each paging. This
KPI shows only the paging success rate on air interface, i.e. paging is sent on air
interface and UE succeed in random access and the following RRC establishment
procedure.
Object: cell
Unit: Percentage
Type: Ratio
2.4.1 Description
The KPI shows probability for an end-user to be provided with an RRC connection at
request.
Per establishment cause and per failure cause (time out, admission control failure, other
reason).
Object: cell
Unit: Percentage
Type: Ratio
=(C373200000+C373200004+C373200008+C373200012+C373200016)/
(C373200000+C373200001+C373200002+C373200003+C373200004+C373200005+C
373200006+C373200007+C373200008+C373200009+C373200010+C373200011+C37
3200012+C373200013+C373200014+C373200015+C373200016+C373200017+C3732
00018+C373200019+C373200019) x 100%
2.5.1 Description
The KPI shows probability for an end-user to successfully re-establish a RRC connection
at request.
Per re-establishment cause and per failure cause (time out, admission control failure,
other reason).
Object: cell
Unit: Percentage
Type: Ratio
2.6.1 Description
The KPI shows probability for an end-user to be provided with an E-RAB at request
within the Initial Context Setup procedure.
per QCI.
Per QCI and per failure cause (admission control failure, Uu Interface Failure , Handover
Trigger, Parameter Error, other reason).
Object: cell
Unit: Percentage
Type: Ratio
=(C373210200+C373210206+C373210212+C373210218+C373210224+C373210230+
C373210236+C373210242+C373210248)/
(C373210200+C373210201+C373210202+C373210203+C37320204+C373210205+C3
73210206+C373210207+C373210208+C373210209+C373210210+C373210211+C373
210212+C373210213+C373210214+C373210215+C373210216+C373210217+C37321
0218+C373210219+C373210220+C373210221+C373210222+C373210223+C3732102
24+C373210225+C373210226+C373210227+C373210228+C373210229+C373210230
+C373210231+C373210232+C373210233+C373210234+C373210235+C373210236+C
373210237+C373210238+C373210239+C373210240+C373210241+C373210242+C37
3210243+C373210244+C373210259+C373210246+C373210247+C373210248+C3732
10249+C373210250+C373210251+C373210252+C373210253) x 100%
2.7.1 Description
The KPI shows probability for an end-user to be provided with an E-RAB at request
within the E-RAB Setup procedure.
per QCI.
Per QCI and per failure cause (admission control failure, Uu Interface Failure , Handover
Trigger, Parameter Error, other reason).
Object: cell
Unit: Percentage
Type: Ratio
=(C373210254+C373210260+C373210266+C373210272+C373210278+C373210284+
C373210290+C373210296+C373210302)/
(C373210254+C373210255+C373210256+C373210257+C373210258+C373210259+C
373210260+C373210261+C373210262+C373210263+C373210264+C373210265+C37
3210266+C373210267+C373210268+C373210269+C373210270+C373210271+C3732
10272+C373210273+C373210274+C373210275+C373210276+C373210277+C373210
278+C373210279+C373210280+C373210281+C373210282+C373210283+C37321028
4+C373210285+C373210286+C373210287+C373210288+C373210289+C373210290+
C373210291+C373210292+C373210293+C373210294+C373210295+C373210296+C3
73210297+C373210298+C373210299+C373210300+C373210301+C373210302+C373
210303+C373210304+C373210305+C373210306+C373210307) x 100%
2.8.1 Description
The KPI shows probability for an end-user to be provided with an E-RAB at request no
matter within the Initial Context Setup procedure or the E-RAB Setup procedure.
per QCI.
Per QCI and per failure cause (admission control failure, Uu Interface Failure , Handover
Trigger, Parameter Error, other reason).
Object: cell
Unit: Percentage
Type: Ratio
=(C373210200+C373210206+C373210212+C373210218+C373210224+C373210230+
C373210236+C373210242+C373210248+C373210254+C373210260+C373210266+C3
73210272+C373210278+C373210284+C373210290+C373210296+C373210302)/
(C373210200+C373210201+C373210202+C373210203+C373210204+C373210205+C
373210206+C373210207+C373210208+C373210209+C373210210+C373210211+C37
3210212+C373210213+C373210214+C373210215+C373210216+C373210217+C3732
10218+C373210219+C373210220+C373210221+C373210222+C373210223+C373210
224+C373210225+C373210226+C373210227+C373210228+C373210229+C37321023
0+C373210231+C373210232+C373210233+C373210234+C373210235+C373210236+
C373210237+C373210238+C373210239+C373210240+C373210241+C373210242+C3
73210243+C373210244+C373210245+C373210246+C373210247+C373210248+C373
210249+C373210250+C373210251+C373210252+C373210253+C373210254+C37321
0255+C373210256+C373210257+C373210258+C373210259+C373210260+C3732102
61+C373210262+C373210263+C373210264+C373210265+C373210266+C373210267
+C373210268+C373210269+C373210270+C373210271+C373210272+C373210273+C
373210274+C373210275+C373210276+C373210277+C373210278+C373210279+C37
3210280+C373210281+C373210282+C373210283+C373210284+C373210285+C3732
10286+C373210287+C373210288+C373210289+C373210290+C373210291+C373210
292+C373210293+C373210294+C373210295+C373210296+C373210297+C37321029
8+C373210299+C373210300+C373210301+C373210302+C373210303+C373210304+
C373210305+C373210306+C373210307) x 100%
2.9.1 Description
The KPI shows probability for an end-user to be provided with a modified E-RAB at
request within the E-RAB Modification procedure.
per QCI.
Per QCI and per failure cause (admission control failure, Uu Interface Failure , Handover
Trigger, Parameter Error, other reason).
Object: cell
Unit: Percentage
Type: Ratio
=(C373210308+C373210314+C373210320+C373210326+C373210332+C373210338+
C373210344+C373210350+C373210356)/
(C373210308+C373210309+C373210310+C373210311+C373210312+C373210313+C
373210314+C373210315+C373210316+C373210317+C373210318+C373210319+C37
3210320+C373210321+C373210322+C373210323+C373210324+C373210325+C3732
10326+C373210327+C373210328+C373210329+C373210330+C373210331+C373210
332+C373210333+C373210334+C373210335+C373210336+C373210337+C37321033
8+C373210339+C373210340+C373210341+C373210342+C373210343+C373210344+
C373210345+C373210346+C373210347+C373210348+C373210349+C373210350+C3
73210351+C373210352+C373210353+C373210354+C373210355+C373210356+C373
210357+C373210358+C373210359+C373210360+C373210361) x 100%
2.10.1 Description
The KPI shows probability for an end-user to be rejected with an E-RAB at request due
to eNodeB admission control, no matter within the Initial Context Setup procedure or the
E-RAB Setup procedure.
per QCI.
per QCI.
Per QCI and per failure cause (admission control failure, Uu Interface Failure , Handover
Trigger, Parameter Error, other reason).
Object: cell
Unit: Percentage
Type: Ratio
=(C373210201+C373210207+C373210213+C373210219+C373210225+C373210231+
C373210237+C373210243+C373210249+C373210255+C373210261+C373210267+C3
73210273+C373210279+C373210285+C373210291+C373210297+C373210303)/
(C373210200+C373210201+C373210202+C373210203+C373210204+C373210205+C
373210206+C373210207+C373210208+C373210209+C373210210+C373210211+C37
3210212+C373210213+C373210214+C373210215+C373210216+C373210217+C3732
10218+C373210219+C373210220+C373210221+C373210222+C373210223+C373210
224+C373210225+C373210226+C373210227+C373210228+C373210229+C37321023
0+C373210231+C373210232+C373210233+C373210234+C373210235+C373210236+
C373210237+C373210238+C373210239+C373210240+C373210241+C373210242+C3
73210243+C373210244+C373210245+C373210246+C373210247+C373210248+C373
210249+C373210250+C373210251+C373210252+C373210253+C373210254+C37321
0255+C373210256+C373210257+C373210258+C373210259+C373210260+C3732102
61+C373210262+C373210263+C373210264+C373210265+C373210266+C373210267
+C373210268+C373210269+C373210270+C373210271+C373210272+C373210273+C
373210274+C373210275+C373210276+C373210277+C373210278+C373210279+C37
3210280+C373210281+C373210282+C373210283+C373210284+C373210285+C3732
10286+C373210287+C373210288+C373210289+C373210290+C373210291+C373210
292+C373210293+C373210294+C373210295+C373210296+C373210297+C37321029
8+C373210299+C373210300+C373210301+C373210302+C373210303+C373210304+
C373210305+C373210306+C373210307) x 100%
2.11.1 Description
The KPI shows probability for an end-user to be rejected with an E-RAB for specified
QCI at request due to eNodeB admission control, no matter within the Initial Context
Setup procedure or the E-RAB Setup procedure.
per QCI.
per QCI.
Per QCI and per failure cause (admission control failure, Uu Interface Failure , Handover
Trigger, Parameter Error, other reason).
Object: cell
Unit: Percentage
Type: Ratio
= (Number of failed initial E-RAB establishment due to admission control failure per QCI
+ Number of failed added E-RAB establishment due to admission control failure per
QCI) / (Number of successful initial E-RAB establishment per QCI + Number of failed
initial E-RAB establishment per QCI + Number of successful added E-RAB
establishment per QCI + Number of failed added E-RAB establishment per QCI) x 100%
=(C373210213+C373210267)/(C373210212+C373210213+C373210214+C373210215
+C373210216+C373210217+C373210266+C373210267+C373210268+C373210269+
C373210270+C373210271)
2.12.1 Description
Object: cell
Unit: Percentage
Type: Ratio
2.13.1 Description
The KPI shows probability for an end-user to successfully establish UE context at each
attempt.
Per failure cause (Activation Failure in Security Mode, Admission Control Failure, RRC
ReConf Failure, UE Reestablish RRC Connection, Context Setup Request Msg Error,
Other Cause)
Object: cell
Unit: Percentage
Type: Ratio
= (Number of Initial Context Setup Request - Number of Initial Context Setup Failure) /
Number of Initial Context Setup Request x 100%
2.14.1 Description
The KPI shows probability for an end-user to be successfully provided with a service
within initial context setup procedure.
Object: cell
Unit: Percentage
Type: Ratio
2.15.1 Description
The KPI shows probability for an end-user to be successfully provided with a service
after initial context setup procedure.
Object: cell
Unit: Percentage
Type: Ratio
3 Retainability
3.1.1 Description
The KPI shows probability for an end-user to loss the RRC connection against the
willing.
Including initial RRC connection establishment and handover in/out RRC connection.
Object: cell
Unit: Percentage
Type: Ratio
3.2.1 Description
The KPI shows probability for an end-user to loss the E-RAB against the willing.
Per QCI
Object: cell
Unit: Percentage
Type: Ratio
=(C373210371+C373210372+C373210373+C373210374+C373210375+C373210376+
C373210377+C373210378+C373210379+C373210380+C373210381+C373210382+C3
73210383+C373210384+C373210385+C373210386+C373210387+C373210388)/
(C373210200+C373210206+C373210212+C373210218+C373210224+C373210230+C
373210236+C373210242+C373210248+C373210254+C373210260+C373210266+C37
3210272+C373210278+C373210284+C373210290+C373210296+C373210302) x
100%
3.3.1 Description
The KPI shows probability for an end-user to loss the E-RAB of specific QCI against the
willing.
Per QCI
Object: cell
Unit: Percentage
Type: Ratio
= (C373210371+C373210372)/(C373210200+C373210254)
= (C373210373+C373210374)/(C373210206+C373210260)
= (C373210375+C373210376)/(C373210212+C373210266)
= (C373210377+C373210378)/(C373210218+C373210272)
= (C373210379+C373210380)/(C373210224+C373210278)
= (C373210381+C373210382)/(C373210230+C373210284)
= (C373210383+C373210384)/(C373210236+C373210290)
= (C373210385+C373210386)/(C373210244+C373210296)
= (C373210387+C373210388)/(C373210248+C373210302)
3.4.1 Description
The KPI shows probability for an end-user to loss the E-RAB against the willing when it
is active, i.e. there was data in the buffer in any of the direction.
per QCI
Object: cell
Unit: Percentage
Type: Ratio
4 Mobility
4.1.1.1 Description
The KPI shows probability for an end-user to succeed in resource preparation phase in
intra-eNB intra-freq handover procedure, on the source cell to the specific target cell
basis.
Number of failed intra-eNB intra-freq outgoing handover preparation per cell pair
Object: cell
Unit: Percentage
Type: Ratio
Intra-eNB Intra-freq Outgoing Handover Preparation Success Rate per Cell pair
= Number of successful intra-eNB intra-freq outgoing handover preparation per cell pair /
(Number of successful intra-eNB intra-freq outgoing handover preparation per cell pair +
Number of failed intra-eNB intra-freq outgoing handover preparation per cell pair) x
100%
4.1.2.1 Description
The KPI shows probability for an end-user to succeed in handover execution phase in
intra-eNB intra-freq handover procedure, on the source cell to the specific target cell
basis.
Number of successful intra-eNB intra-freq outgoing handover execution per cell pair
Number of failed intra-eNB intra-freq outgoing handover execution per cell pair
Object: cell
Unit: Percentage
Type: Ratio
Intra-eNB Intra-freq Outgoing Handover Execution Success Rate per Cell pair
= Number of successful intra-eNB intra-freq outgoing handover execution per cell pair /
(Number of successful intra-eNB intra-freq outgoing handover execution per cell pair +
Number of failed intra-eNB intra-freq outgoing handover execution per cell pair) x 100%
4.1.3 Intra-eNB Intra-freq Outgoing Mobility Success Rate per Cell Pair
4.1.3.1 Description
The KPI shows probability for an end-user to succeed in intra-eNB intra-freq handover
procedure, on the source cell to the specific target cell basis.
Intra-eNB Intra-freq Outgoing Handover Preparation Success Rate per Cell pair;
Intra-eNB Intra-freq Outgoing Handover Execution Success Rate per Cell pair.
Object: cell
Unit: Percentage
Type: Ratio
= Intra-eNB Intra-freq Outgoing Handover Preparation Success Rate per Cell pair x
Intra-eNB Intra-freq Outgoing Handover Execution Success Rate per Cell pair
4.1.4.1 Description
The KPI shows probability for an end-user to succeed in resource preparation phase in
intra-eNB intra-freq handover procedure, on the specific source cell to the target cell
basis.
Number of failed intra-eNB intra-freq incoming handover preparation per cell pair
Object: cell
Unit: Percentage
Type: Ratio
Intra-eNB Intra-freq Incoming Handover Preparation Success Rate per Cell pair
4.1.5.1 Description
The KPI shows probability for an end-user to succeed in handover execution phase in
intra-eNB intra-freq handover procedure, on the specific source cell to the target cell
basis.
Number of successful intra-eNB intra-freq incoming handover execution per cell pair
Number of failed intra-eNB intra-freq incoming handover execution per cell pair
Object: cell
Unit: Percentage
Type: Ratio
Intra-eNB Intra-freq Incoming Handover Execution Success Rate per Cell pair
= Number of successful intra-eNB intra-freq Incoming handover execution per cell pair /
(Number of successful intra-eNB intra-freq Incoming handover execution per cell pair +
Number of failed intra-eNB intra-freq Incoming handover execution per cell pair) x 100%
=C373600084/(C373600084+C373600085+C373600086+C373600087) x 100%
4.1.6 Intra-eNB Intra-freq Incoming Mobility Success Rate per Cell Pair
4.1.6.1 Description
The KPI shows probability for an end-user to succeed in intra-eNB intra-freq handover
procedure, on the specific source cell to the target cell basis.
Intra-eNB Intra-freq Incoming Handover Preparation Success Rate per Cell pair;
Intra-eNB Intra-freq Incoming Handover Execution Success Rate per Cell pair.
Object: cell
Unit: Percentage
Type: Ratio
= Intra-eNB Intra-freq Incoming Handover Preparation Success Rate per Cell pair x
Intra-eNB Intra-freq Incoming Handover Execution Success Rate per Cell pair
4.1.7.1 Description
The KPI shows probability for an end-user to succeed in resource preparation phase in
intra-eNB intra-freq handover procedure, on the source cell basis.
Object: cell
Unit: Percentage
Type: Ratio
4.1.8.1 Description
The KPI shows probability for an end-user to succeed in handover execution phase in
intra-eNB intra-freq handover procedure, on the source cell basis.
Object: cell
Unit: Percentage
Type: Ratio
4.1.9.1 Description
The KPI shows probability for an end-user to succeed in intra-eNB intra-freq handover
procedure, on the source cell basis.
Object: cell
Unit: Percentage
Type: Ratio
= Intra-eNB Intra-freq outgoing Handover Preparation Success Rate per Cell x Intra-eNB
Intra-freq outgoing Handover Execution Success Rate per Cell
4.1.10.1 Description
The KPI shows probability for an end-user to succeed in resource preparation phase in
intra-eNB intra-freq handover procedure, on the target cell basis.
Object: cell
Unit: Percentage
Type: Ratio
4.1.11.1 Description
The KPI shows probability for an end-user to succeed in handover execution phase in
intra-eNB intra-freq handover procedure, on the target cell basis.
Object: cell
Unit: Percentage
Type: Ratio
4.1.12.1 Description
The KPI shows probability for an end-user to succeed in intra-eNB intra-freq handover
procedure, on the target cell basis.
Object: cell
Unit: Percentage
Type: Ratio
= Intra-eNB Intra-freq Incoming Handover Preparation Success Rate per Cell x Intra-
eNB Intra-freq Incoming Handover Execution Success Rate per Cell
4.2.1.1 Description
The KPI shows probability for an end-user to succeed in resource preparation phase in
inter-eNB via X2 intra-freq handover procedure, on the source cell to the specific target
cell basis.
Number of failed inter-eNB via X2 intra-freq outgoing handover preparation per cell
pair
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via X2 Intra-freq Outgoing Handover Preparation Success Rate per Cell pair
4.2.2.1 Description
The KPI shows probability for an end-user to succeed in handover execution phase in
inter-eNB via X2 intra-freq handover procedure, on the source cell to the specific target
cell basis.
Number of failed inter-eNB via X2 intra-freq outgoing handover execution per cell
pair
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via X2 Intra-freq Outgoing Handover Execution Success Rate per Cell pair
= Number of successful inter-eNB via X2 intra-freq outgoing handover execution per cell
pair / (Number of successful inter-eNB via X2 intra-freq outgoing handover execution per
cell pair + Number of failed inter-eNB via X2 intra-freq outgoing handover execution per
cell pair) x 100%
4.2.3 Inter-eNB via X2 Intra-freq Outgoing Mobility Success Rate per Cell
Pair
4.2.3.1 Description
The KPI shows probability for an end-user to succeed in inter-eNB via X2 intra-freq
handover procedure, on the source cell to the specific target cell basis.
Inter-eNB via X2 Intra-freq outgoing Handover Preparation Success Rate per Cell Pair;
Inter-eNB via X2 Intra-freq outgoing Handover Execution Success Rate per Cell Pair.
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via X2 Intra-freq Outgoing Mobility Success Rate per Cell pair
= Inter-eNB via X2 Intra-freq outgoing Handover Preparation Success Rate per Cell Pair
x Inter-eNB via X2 Intra-freq outgoing Handover Execution Success Rate per Cell Pair
4.2.4.1 Description
The KPI shows probability for an end-user to succeed in resource preparation phase in
inter-eNB via X2 intra-freq handover procedure, on the specific source cell to the target
cell basis.
Number of failed inter-eNB via X2 intra-freq incoming handover preparation per cell
pair
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via X2 Intra-freq Incoming Handover Preparation Success Rate per Cell pair
4.2.5.1 Description
The KPI shows probability for an end-user to succeed in handover execution phase in
inter-eNB via X2 intra-freq handover procedure, on the specific source cell to the target
cell basis.
Number of failed inter-eNB via X2 intra-freq incoming handover execution per cell
pair
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via X2 Intra-freq Incoming Handover Execution Success Rate per Cell pair
= Number of successful inter-eNB via X2 intra-freq Incoming handover execution per cell
pair / (Number of successful inter-eNB via X2 intra-freq Incoming handover execution
per cell pair + Number of failed inter-eNB via X2 intra-freq Incoming handover execution
per cell pair) x 100%
4.2.6 Inter-eNB via X2 Intra-freq Incoming Mobility Success Rate per Cell
Pair
4.2.6.1 Description
The KPI shows probability for an end-user to succeed in inter-eNB via X2 intra-freq
handover procedure, on the source cell to the specific target cell basis.
Inter-eNB via X2 Intra-freq incoming Handover Preparation Success Rate per Cell Pair;
Inter-eNB via X2 Intra-freq incoming Handover Execution Success Rate per Cell Pair.
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via X2 Intra-freq Incoming Mobility Success Rate per Cell pair
= Inter-eNB via X2 Intra-freq incoming Handover Preparation Success Rate per Cell Pair
x Inter-eNB via X2 Intra-freq incoming Handover Execution Success Rate per Cell Pair
4.2.7.1 Description
The KPI shows probability for an end-user to succeed in resource preparation phase in
inter-eNB via X2 intra-freq handover procedure, on the source cell basis.
Number of failed inter-eNB via X2 intra-freq outgoing handover preparation per cell
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via X2 Intra-freq Outgoing Handover Preparation Success Rate per Cell
4.2.8.1 Description
The KPI shows probability for an end-user to succeed in handover execution phase in
inter-eNB via X2 intra-freq handover procedure, on the source cell basis.
Number of failed inter-eNB via X2 intra-freq outgoing handover execution per cell
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via X2 Intra-freq Outgoing Handover Execution Success Rate per Cell
cell + Number of failed inter-eNB via X2 intra-freq outgoing handover execution per cell)
x 100%
4.2.9 Inter-eNB via X2 Intra-freq Outgoing Mobility Success Rate per Cell
4.2.9.1 Description
The KPI shows probability for an end-user to succeed in inter-eNB via X2 intra-freq
handover procedure, on the source cell basis.
Inter-eNB via X2 Intra-freq outgoing Handover Preparation Success Rate per Cell;
Inter-eNB via X2 Intra-freq outgoing Handover Execution Success Rate per Cell.
Object: cell
Unit: Percentage
Type: Ratio
= Inter-eNB via X2 Intra-freq outgoing Handover Preparation Success Rate per Cell x
Inter-eNB via X2 Intra-freq outgoing Handover Execution Success Rate per Cell
4.2.10.1 Description
The KPI shows probability for an end-user to succeed in resource preparation phase in
inter-eNB via X2 intra-freq handover procedure, on the target cell basis.
Number of failed inter-eNB via X2 intra-freq incoming handover preparation per cell
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via X2 Intra-freq Incoming Handover Preparation Success Rate per Cell
4.2.11.1 Description
The KPI shows probability for an end-user to succeed in handover execution phase in
inter-eNB via X2 intra-freq handover procedure, on the target cell basis.
Number of failed inter-eNB via X2 intra-freq incoming handover execution per cell
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via X2 Intra-freq Incoming Handover Execution Success Rate per Cell
= Number of successful inter-eNB via X2 intra-freq Incoming handover execution per cell
/ (Number of successful inter-eNB via X2 intra-freq Incoming handover execution per cell
+ Number of failed inter-eNB via X2 intra-freq Incoming handover execution per cell) x
100%
4.2.12 Inter-eNB via X2 Intra-freq Incoming Mobility Success Rate per Cell
4.2.12.1 Description
The KPI shows probability for an end-user to succeed in inter-eNB via X2 intra-freq
handover procedure, on the target cell basis.
Inter-eNB via X2 Intra-freq incoming Handover Preparation Success Rate per Cell;
Inter-eNB via X2 Intra-freq incoming Handover Execution Success Rate per Cell.
Object: cell
Unit: Percentage
Type: Ratio
= Inter-eNB via X2 Intra-freq incoming Handover Preparation Success Rate per Cell x
Inter-eNB via X2 Intra-freq incoming Handover Execution Success Rate per Cell
4.2.13.1 Description
The KPI shows probability for an end-user to succeed in resource preparation phase in
inter-eNB via S1 intra-freq handover procedure, on the source cell to the specific target
cell basis.
Number of failed inter-eNB via S1 intra-freq outgoing handover preparation per cell
pair
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via S1 Intra-freq Outgoing Handover Preparation Success Rate per Cell pair
4.2.14.1 Description
The KPI shows probability for an end-user to succeed in handover execution phase in
inter-eNB via S1 intra-freq handover procedure, on the source cell to the specific target
cell basis.
Number of failed inter-eNB via S1 intra-freq outgoing handover execution per cell
pair
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via S1 Intra-freq Outgoing Handover Execution Success Rate per Cell pair
= Number of successful inter-eNB via S1 intra-freq outgoing handover execution per cell
pair / (Number of successful inter-eNB via S1 intra-freq outgoing handover execution per
cell pair + Number of failed inter-eNB via S1 intra-freq outgoing handover execution per
cell pair) x 100%
4.2.15 Inter-eNB via S1 Intra-freq Outgoing Mobility Success Rate per Cell
Pair
4.2.15.1 Description
The KPI shows probability for an end-user to succeed in inter-eNB via S1 intra-freq
handover procedure, on the source cell to the specific target cell basis.
Inter-eNB via S1 Intra-freq outgoing Handover Preparation Success Rate per Cell Pair;
Inter-eNB via S1 Intra-freq outgoing Handover Execution Success Rate per Cell Pair.
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via S1 Intra-freq Outgoing Mobility Success Rate per Cell pair
= Inter-eNB via S1 Intra-freq outgoing Handover Preparation Success Rate per Cell Pair
x Inter-eNB via S1 Intra-freq outgoing Handover Execution Success Rate per Cell Pair
4.2.16.1 Description
The KPI shows probability for an end-user to succeed in resource preparation phase in
inter-eNB via S1 intra-freq handover procedure, on the specific source cell to the target
cell basis.
Number of failed inter-eNB via S1 intra-freq incoming handover preparation per cell
pair
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via S1 Intra-freq Incoming Handover Preparation Success Rate per Cell pair
4.2.17.1 Description
The KPI shows probability for an end-user to succeed in handover execution phase in
inter-eNB via S1 intra-freq handover procedure, on the specific source cell to the target
cell basis.
Number of failed inter-eNB via S1 intra-freq incoming handover execution per cell
pair
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via S1 Intra-freq Incoming Handover Execution Success Rate per Cell pair
= Number of successful inter-eNB via S1 intra-freq Incoming handover execution per cell
pair / (Number of successful inter-eNB via S1 intra-freq Incoming handover execution
per cell pair + Number of failed inter-eNB via S1 intra-freq Incoming handover execution
per cell pair) x 100%
4.2.18 Inter-eNB via S1 Intra-freq Incoming Mobility Success Rate per Cell
Pair
4.2.18.1 Description
The KPI shows probability for an end-user to succeed in inter-eNB via S1 intra-freq
handover procedure, on the source cell to the specific target cell basis.
Inter-eNB via S1 Intra-freq incoming Handover Preparation Success Rate per Cell Pair;
Inter-eNB via S1 Intra-freq incoming Handover Execution Success Rate per Cell Pair.
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via S1 Intra-freq Incoming Mobility Success Rate per Cell pair
= Inter-eNB via S1 Intra-freq incoming Handover Preparation Success Rate per Cell Pair
x Inter-eNB via S1 Intra-freq incoming Handover Execution Success Rate per Cell Pair
4.2.19.1 Description
The KPI shows probability for an end-user to succeed in resource preparation phase in
inter-eNB via S1 intra-freq handover procedure, on the source cell basis.
Number of failed inter-eNB via S1 intra-freq outgoing handover preparation per cell
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via S1 Intra-freq Outgoing Handover Preparation Success Rate per Cell
4.2.20.1 Description
The KPI shows probability for an end-user to succeed in handover execution phase in
inter-eNB via S1 intra-freq handover procedure, on the source cell basis.
Number of failed inter-eNB via S1 intra-freq outgoing handover execution per cell
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via S1 Intra-freq Outgoing Handover Execution Success Rate per Cell
4.2.21 Inter-eNB via S1 Intra-freq Outgoing Mobility Success Rate per Cell
4.2.21.1 Description
The KPI shows probability for an end-user to succeed in inter-eNB via S1 intra-freq
handover procedure, on the source cell basis.
Inter-eNB via S1 Intra-freq outgoing Handover Preparation Success Rate per Cell;
Inter-eNB via S1 Intra-freq outgoing Handover Execution Success Rate per Cell.
Object: cell
Unit: Percentage
Type: Ratio
= Inter-eNB via S1 Intra-freq outgoing Handover Preparation Success Rate per Cell x
Inter-eNB via S1 Intra-freq outgoing Handover Execution Success Rate per Cell
4.2.22.1 Description
The KPI shows probability for an end-user to succeed in resource preparation phase in
inter-eNB via S1 intra-freq handover procedure, on the target cell basis.
Number of failed inter-eNB via S1 intra-freq incoming handover preparation per cell
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via S1 Intra-freq Incoming Handover Preparation Success Rate per Cell
4.2.23.1 Description
The KPI shows probability for an end-user to succeed in handover execution phase in
inter-eNB via S1 intra-freq handover procedure, on the target cell basis.
Number of failed inter-eNB via S1 intra-freq incoming handover execution per cell
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via S1 Intra-freq Incoming Handover Execution Success Rate per Cell
= Number of successful inter-eNB via S1 intra-freq Incoming handover execution per cell
/ (Number of successful inter-eNB via S1 intra-freq Incoming handover execution per cell
+ Number of failed inter-eNB via S1 intra-freq Incoming handover execution per cell) x
100%
4.2.24 Inter-eNB via S1 Intra-freq Incoming Mobility Success Rate per Cell
4.2.24.1 Description
The KPI shows probability for an end-user to succeed in inter-eNB via S1 intra-freq
handover procedure, on the target cell basis.
Inter-eNB via S1 Intra-freq incoming Handover Preparation Success Rate per Cell;
Inter-eNB via S1 Intra-freq incoming Handover Execution Success Rate per Cell.
Object: cell
Unit: Percentage
Type: Ratio
= Inter-eNB via S1 Intra-freq incoming Handover Preparation Success Rate per Cell x
Inter-eNB via S1 Intra-freq incoming Handover Execution Success Rate per Cell
4.3.1.1 Description
The KPI shows probability for an end-user to succeed in resource preparation phase in
intra-eNB inter-freq handover procedure, on the source cell to the specific target cell
basis.
Number of failed intra-eNB inter-freq outgoing handover preparation per cell pair
Object: cell
Unit: Percentage
Type: Ratio
Intra-eNB Inter-freq Outgoing Handover Preparation Success Rate per Cell pair
= Number of successful intra-eNB inter-freq outgoing handover preparation per cell pair /
(Number of successful intra-eNB inter-freq outgoing handover preparation per cell pair +
Number of failed intra-eNB inter-freq outgoing handover preparation per cell pair) x
100%
4.3.2.1 Description
The KPI shows probability for an end-user to succeed in handover execution phase in
intra-eNB inter-freq handover procedure, on the source cell to the specific target cell
basis.
Number of successful intra-eNB inter-freq outgoing handover execution per cell pair
Number of failed intra-eNB inter-freq outgoing handover execution per cell pair
Object: cell
Unit: Percentage
Type: Ratio
Intra-eNB Inter-freq Outgoing Handover Execution Success Rate per Cell pair
= Number of successful intra-eNB inter-freq outgoing handover execution per cell pair /
(Number of successful intra-eNB inter-freq outgoing handover execution per cell pair +
Number of failed intra-eNB inter-freq outgoing handover execution per cell pair) x 100%
4.3.3 Intra-eNB Inter-freq Outgoing Mobility Success Rate per Cell Pair
4.3.3.1 Description
The KPI shows probability for an end-user to succeed in intra-eNB inter-freq handover
procedure, on the source cell to the specific target cell basis.
Intra-eNB Inter-freq Outgoing Handover Preparation Success Rate per Cell pair;
Intra-eNB Inter-freq Outgoing Handover Execution Success Rate per Cell pair.
Object: cell
Unit: Percentage
Type: Ratio
= Intra-eNB Inter-freq Outgoing Handover Preparation Success Rate per Cell pair x
Intra-eNB Inter-freq Outgoing Handover Execution Success Rate per Cell pair
4.3.4.1 Description
The KPI shows probability for an end-user to succeed in resource preparation phase in
intra-eNB inter-freq handover procedure, on the specific source cell to the target cell
basis.
Number of failed intra-eNB inter-freq incoming handover preparation per cell pair
Object: cell
Unit: Percentage
Type: Ratio
Intra-eNB Inter-freq Incoming Handover Preparation Success Rate per Cell pair
4.3.5.1 Description
The KPI shows probability for an end-user to succeed in handover execution phase in
intra-eNB inter-freq handover procedure, on the specific source cell to the target cell
basis.
Number of successful intra-eNB inter-freq incoming handover execution per cell pair
Number of failed intra-eNB inter-freq incoming handover execution per cell pair
Object: cell
Unit: Percentage
Type: Ratio
Intra-eNB Inter-freq Incoming Handover Execution Success Rate per Cell pair
= Number of successful intra-eNB inter-freq Incoming handover execution per cell pair /
(Number of successful intra-eNB inter-freq Incoming handover execution per cell pair +
Number of failed intra-eNB inter-freq Incoming handover execution per cell pair) x 100%
4.3.6 Intra-eNB Inter-freq Incoming Mobility Success Rate per Cell Pair
4.3.6.1 Description
The KPI shows probability for an end-user to succeed in intra-eNB inter-freq handover
procedure, on the specific source cell to the target cell basis.
Intra-eNB Inter-freq Incoming Handover Preparation Success Rate per Cell pair;
Intra-eNB Inter-freq Incoming Handover Execution Success Rate per Cell pair.
Object: cell
Unit: Percentage
Type: Ratio
= Intra-eNB Inter-freq Incoming Handover Preparation Success Rate per Cell pair x
Intra-eNB Inter-freq Incoming Handover Execution Success Rate per Cell pair
4.3.7.1 Description
The KPI shows probability for an end-user to succeed in resource preparation phase in
intra-eNB inter-freq handover procedure, on the source cell basis.
Object: cell
Unit: Percentage
Type: Ratio
4.3.8.1 Description
The KPI shows probability for an end-user to succeed in handover execution phase in
intra-eNB inter-freq handover procedure, on the source cell basis.
Object: cell
Unit: Percentage
Type: Ratio
4.3.9.1 Description
The KPI shows probability for an end-user to succeed in intra-eNB inter-freq handover
procedure, on the source cell basis.
Object: cell
Unit: Percentage
Type: Ratio
= Intra-eNB Inter-freq outgoing Handover Preparation Success Rate per Cell x Intra-eNB
Inter-freq outgoing Handover Execution Success Rate per Cell
4.3.10.1 Description
The KPI shows probability for an end-user to succeed in resource preparation phase in
intra-eNB inter-freq handover procedure, on the target cell basis.
Object: cell
Unit: Percentage
Type: Ratio
4.3.11.1 Description
The KPI shows probability for an end-user to succeed in handover execution phase in
intra-eNB inter-freq handover procedure, on the target cell basis.
Object: cell
Unit: Percentage
Type: Ratio
4.3.12.1 Description
The KPI shows probability for an end-user to succeed in intra-eNB inter-freq handover
procedure, on the target cell basis.
Object: cell
Unit: Percentage
Type: Ratio
= Intra-eNB Inter-freq Incoming Handover Preparation Success Rate per Cell x Intra-
eNB Inter-freq Incoming Handover Execution Success Rate per Cell
4.4.1.1 Description
The KPI shows probability for an end-user to succeed in resource preparation phase in
inter-eNB via X2 inter-freq handover procedure, on the source cell to the specific target
cell basis.
Number of failed inter-eNB via X2 inter-freq outgoing handover preparation per cell
pair
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via X2 Inter-freq Outgoing Handover Preparation Success Rate per Cell pair
4.4.2.1 Description
The KPI shows probability for an end-user to succeed in handover execution phase in
inter-eNB via X2 inter-freq handover procedure, on the source cell to the specific target
cell basis.
Number of failed inter-eNB via X2 inter-freq outgoing handover execution per cell
pair
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via X2 Inter-freq Outgoing Handover Execution Success Rate per Cell pair
= Number of successful inter-eNB via X2 inter-freq outgoing handover execution per cell
pair / (Number of successful inter-eNB via X2 inter-freq outgoing handover execution per
cell pair + Number of failed inter-eNB via X2 inter-freq outgoing handover execution per
cell pair) x 100%
4.4.3 Inter-eNB via X2 Inter-freq Outgoing Mobility Success Rate per Cell
Pair
4.4.3.1 Description
The KPI shows probability for an end-user to succeed in inter-eNB via X2 inter-freq
handover procedure, on the source cell to the specific target cell basis.
Inter-eNB via X2 Inter-freq outgoing Handover Preparation Success Rate per Cell Pair;
Inter-eNB via X2 Inter-freq outgoing Handover Execution Success Rate per Cell Pair.
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via X2 Inter-freq Outgoing Mobility Success Rate per Cell pair
= Inter-eNB via X2 Inter-freq outgoing Handover Preparation Success Rate per Cell Pair
x Inter-eNB via X2 Inter-freq outgoing Handover Execution Success Rate per Cell Pair
4.4.4.1 Description
The KPI shows probability for an end-user to succeed in resource preparation phase in
inter-eNB via X2 inter-freq handover procedure, on the specific source cell to the target
cell basis.
Number of failed inter-eNB via X2 inter-freq incoming handover preparation per cell
pair
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via X2 Inter-freq Incoming Handover Preparation Success Rate per Cell pair
4.4.5.1 Description
The KPI shows probability for an end-user to succeed in handover execution phase in
inter-eNB via X2 inter-freq handover procedure, on the specific source cell to the target
cell basis.
Number of failed inter-eNB via X2 inter-freq incoming handover execution per cell
pair
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via X2 Inter-freq Incoming Handover Execution Success Rate per Cell pair
= Number of successful inter-eNB via X2 inter-freq Incoming handover execution per cell
pair / (Number of successful inter-eNB via X2 inter-freq Incoming handover execution
per cell pair + Number of failed inter-eNB via X2 inter-freq Incoming handover execution
per cell pair) x 100%
4.4.6 Inter-eNB via X2 Inter-freq Incoming Mobility Success Rate per Cell
Pair
4.4.6.1 Description
The KPI shows probability for an end-user to succeed in inter-eNB via X2 inter-freq
handover procedure, on the source cell to the specific target cell basis.
Inter-eNB via X2 Inter-freq incoming Handover Preparation Success Rate per Cell Pair;
Inter-eNB via X2 Inter-freq incoming Handover Execution Success Rate per Cell Pair.
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via X2 Inter-freq Incoming Mobility Success Rate per Cell pair
= Inter-eNB via X2 Inter-freq incoming Handover Preparation Success Rate per Cell Pair
x Inter-eNB via X2 Inter-freq incoming Handover Execution Success Rate per Cell Pair
4.4.7.1 Description
The KPI shows probability for an end-user to succeed in resource preparation phase in
inter-eNB via X2 inter-freq handover procedure, on the source cell basis.
Number of failed inter-eNB via X2 inter-freq outgoing handover preparation per cell
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via X2 Inter-freq Outgoing Handover Preparation Success Rate per Cell
4.4.8.1 Description
The KPI shows probability for an end-user to succeed in handover execution phase in
inter-eNB via X2 inter-freq handover procedure, on the source cell basis.
Number of failed inter-eNB via X2 inter-freq outgoing handover execution per cell
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via X2 Inter-freq Outgoing Handover Execution Success Rate per Cell
cell + Number of failed inter-eNB via X2 inter-freq outgoing handover execution per cell)
x 100%
= C373292180/(C373292180+C373292181+C373292182+C373292183) x 100%
4.4.9 Inter-eNB via X2 Inter-freq Outgoing Mobility Success Rate per Cell
4.4.9.1 Description
The KPI shows probability for an end-user to succeed in inter-eNB via X2 inter-freq
handover procedure, on the source cell basis.
Inter-eNB via X2 Inter-freq outgoing Handover Preparation Success Rate per Cell;
Inter-eNB via X2 Inter-freq outgoing Handover Execution Success Rate per Cell.
Object: cell
Unit: Percentage
Type: Ratio
= Inter-eNB via X2 Inter-freq outgoing Handover Preparation Success Rate per Cell x
Inter-eNB via X2 Inter-freq outgoing Handover Execution Success Rate per Cell
4.4.10.1 Description
The KPI shows probability for an end-user to succeed in resource preparation phase in
inter-eNB via X2 inter-freq handover procedure, on the target cell basis.
Number of failed inter-eNB via X2 inter-freq incoming handover preparation per cell
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via X2 Inter-freq Incoming Handover Preparation Success Rate per Cell
= C373292131/(C373292131+C373292132+C373292133+C373292134) x 100%
4.4.11.1 Description
The KPI shows probability for an end-user to succeed in handover execution phase in
inter-eNB via X2 inter-freq handover procedure, on the target cell basis.
Number of failed inter-eNB via X2 inter-freq incoming handover execution per cell
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via X2 Inter-freq Incoming Handover Execution Success Rate per Cell
= Number of successful inter-eNB via X2 inter-freq Incoming handover execution per cell
/ (Number of successful inter-eNB via X2 inter-freq Incoming handover execution per cell
+ Number of failed inter-eNB via X2 inter-freq Incoming handover execution per cell) x
100%
4.4.12 Inter-eNB via X2 Inter-freq Incoming Mobility Success Rate per Cell
4.4.12.1 Description
The KPI shows probability for an end-user to succeed in inter-eNB via X2 inter-freq
handover procedure, on the target cell basis.
Inter-eNB via X2 Inter-freq incoming Handover Preparation Success Rate per Cell;
Inter-eNB via X2 Inter-freq incoming Handover Execution Success Rate per Cell.
Object: cell
Unit: Percentage
Type: Ratio
= Inter-eNB via X2 Inter-freq incoming Handover Preparation Success Rate per Cell x
Inter-eNB via X2 Inter-freq incoming Handover Execution Success Rate per Cell
4.4.13.1 Description
The KPI shows probability for an end-user to succeed in resource preparation phase in
inter-eNB via S1 inter-freq handover procedure, on the source cell to the specific target
cell basis.
Number of failed inter-eNB via S1 inter-freq outgoing handover preparation per cell
pair
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via S1 Inter-freq Outgoing Handover Preparation Success Rate per Cell pair
4.4.14.1 Description
The KPI shows probability for an end-user to succeed in handover execution phase in
inter-eNB via S1 inter-freq handover procedure, on the source cell to the specific target
cell basis.
Number of failed inter-eNB via S1 inter-freq outgoing handover execution per cell
pair
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via S1 Inter-freq Outgoing Handover Execution Success Rate per Cell pair
= Number of successful inter-eNB via S1 inter-freq outgoing handover execution per cell
pair / (Number of successful inter-eNB via S1 inter-freq outgoing handover execution per
cell pair + Number of failed inter-eNB via S1 inter-freq outgoing handover execution per
cell pair) x 100%
4.4.15 Inter-eNB via S1 Inter-freq Outgoing Mobility Success Rate per Cell
Pair
4.4.15.1 Description
The KPI shows probability for an end-user to succeed in inter-eNB via S1 inter-freq
handover procedure, on the source cell to the specific target cell basis.
Inter-eNB via S1 Inter-freq outgoing Handover Preparation Success Rate per Cell Pair;
Inter-eNB via S1 Inter-freq outgoing Handover Execution Success Rate per Cell Pair.
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via S1 Inter-freq Outgoing Mobility Success Rate per Cell pair
= Inter-eNB via S1 Inter-freq outgoing Handover Preparation Success Rate per Cell Pair
x Inter-eNB via S1 Inter-freq outgoing Handover Execution Success Rate per Cell Pair
4.4.16.1 Description
The KPI shows probability for an end-user to succeed in resource preparation phase in
inter-eNB via S1 inter-freq handover procedure, on the specific source cell to the target
cell basis.
Number of failed inter-eNB via S1 inter-freq incoming handover preparation per cell
pair
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via S1 Inter-freq Incoming Handover Preparation Success Rate per Cell pair
4.4.17.1 Description
The KPI shows probability for an end-user to succeed in handover execution phase in
inter-eNB via S1 inter-freq handover procedure, on the specific source cell to the target
cell basis.
Number of failed inter-eNB via S1 inter-freq incoming handover execution per cell
pair
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via S1 Inter-freq Incoming Handover Execution Success Rate per Cell pair
= Number of successful inter-eNB via S1 inter-freq Incoming handover execution per cell
pair / (Number of successful inter-eNB via S1 inter-freq Incoming handover execution
per cell pair + Number of failed inter-eNB via S1 inter-freq Incoming handover execution
per cell pair) x 100%
4.4.18 Inter-eNB via S1 Inter-freq Incoming Mobility Success Rate per Cell
Pair
4.4.18.1 Description
The KPI shows probability for an end-user to succeed in inter-eNB via S1 inter-freq
handover procedure, on the source cell to the specific target cell basis.
Inter-eNB via S1 Inter-freq incoming Handover Preparation Success Rate per Cell Pair;
Inter-eNB via S1 Inter-freq incoming Handover Execution Success Rate per Cell Pair.
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via S1 Inter-freq Incoming Mobility Success Rate per Cell pair
= Inter-eNB via S1 Inter-freq incoming Handover Preparation Success Rate per Cell Pair
x Inter-eNB via S1 Inter-freq incoming Handover Execution Success Rate per Cell Pair
4.4.19.1 Description
The KPI shows probability for an end-user to succeed in resource preparation phase in
inter-eNB via S1 inter-freq handover procedure, on the source cell basis.
Number of failed inter-eNB via S1 inter-freq outgoing handover preparation per cell
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via S1 Inter-freq Outgoing Handover Preparation Success Rate per Cell
4.4.20.1 Description
The KPI shows probability for an end-user to succeed in handover execution phase in
inter-eNB via S1 inter-freq handover procedure, on the source cell basis.
Number of failed inter-eNB via S1 inter-freq outgoing handover execution per cell
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via S1 Inter-freq Outgoing Handover Execution Success Rate per Cell
4.4.21 Inter-eNB via S1 Inter-freq Outgoing Mobility Success Rate per Cell
4.4.21.1 Description
The KPI shows probability for an end-user to succeed in inter-eNB via S1 inter-freq
handover procedure, on the source cell basis.
Inter-eNB via S1 Inter-freq outgoing Handover Preparation Success Rate per Cell;
Inter-eNB via S1 Inter-freq outgoing Handover Execution Success Rate per Cell.
Object: cell
Unit: Percentage
Type: Ratio
= Inter-eNB via S1 Inter-freq outgoing Handover Preparation Success Rate per Cell x
Inter-eNB via S1 Inter-freq outgoing Handover Execution Success Rate per Cell
4.4.22.1 Description
The KPI shows probability for an end-user to succeed in resource preparation phase in
inter-eNB via S1 inter-freq handover procedure, on the target cell basis.
Number of failed inter-eNB via S1 inter-freq incoming handover preparation per cell
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via S1 Inter-freq Incoming Handover Preparation Success Rate per Cell
4.4.23.1 Description
The KPI shows probability for an end-user to succeed in handover execution phase in
inter-eNB via S1 inter-freq handover procedure, on the target cell basis.
Number of failed inter-eNB via S1 inter-freq incoming handover execution per cell
Object: cell
Unit: Percentage
Type: Ratio
Inter-eNB via S1 Inter-freq Incoming Handover Execution Success Rate per Cell
= Number of successful inter-eNB via S1 inter-freq Incoming handover execution per cell
/ (Number of successful inter-eNB via S1 inter-freq Incoming handover execution per cell
+ Number of failed inter-eNB via S1 inter-freq Incoming handover execution per cell) x
100%
4.4.24 Inter-eNB via S1 Inter-freq Incoming Mobility Success Rate per Cell
4.4.24.1 Description
The KPI shows probability for an end-user to succeed in inter-eNB via S1 inter-freq
handover procedure, on the target cell basis.
Inter-eNB via S1 Inter-freq incoming Handover Preparation Success Rate per Cell;
Inter-eNB via S1 Inter-freq incoming Handover Execution Success Rate per Cell.
Object: cell
Unit: Percentage
Type: Ratio
= Inter-eNB via S1 Inter-freq incoming Handover Preparation Success Rate per Cell x
Inter-eNB via S1 Inter-freq incoming Handover Execution Success Rate per Cell
4.5.1 Description
The KPI shows probability for an end-user to be rejected with an E-RAB at request due
to eNodeB admission control during the handover procedure, no matter intra/inter-
eNodeB, intra/inter-freq, intra/inter-RAT.
per QCI, per intra/inter-eNodeB, per intra/inter-freq, incoming per cell, per failure cause
(admission control failure, Uu Interface Failure , Handover Trigger, Parameter Error,
other reason).
Per QCI
Object: cell
Unit: Percentage
Type: Ratio
=(C373250941+C373261241+C373271541+C373281841+C373292141+C373302441)/
(C373250940+C373250941+C373250942+C373250943+C373261240+C373261241+C
373261242+C373261243+C373271540+C373271541+C373271542+C373271543+C37
3281840+C373281841+C373281842+C373281843+C373292140+C373292141+C3732
92142+C373292143+C373302440+C373302441+C373302442+C373302443) x 100%
4.6.1 Description
The KPI shows probability for an end-user to be rejected with an E-RAB for specified
QCI at request due to eNodeB admission control during the handover procedure, no
matter intra/inter-eNodeB, intra/inter-freq, intra/inter-RAT.
per QCI, per intra/inter-eNodeB, per intra/inter-freq, incoming per cell, per failure cause
(admission control failure, Uu Interface Failure , Handover Trigger, Parameter Error,
other reason).
Per QCI
Object: cell
Unit: Percentage
Type: Ratio
= Number of failed HO E-RAB establishment due to admission control failure per QCI /
(Number of successful HO E-RAB establishment per QCI+ Number of failed HO E-RAB
establishment per QCI) x 100%
=(C373600045+C373610345+C373620645+C373630945+C373641245+C373651545)/
(C373600044+C373600045+C373600046+C373600047+C373610344+C373610345+C
373610346+C373610347+C373620644+C373620645+C373620646+C373620647+C37
3630944+C373630945+C373630946+C373630947+C373641244+C373641245+C3736
41246+C373641247+C373651544+C373651545+C373651546+C373651547)
=(C373600049+C373610349+C373620649+C373630949+C373641249+C373651549)/
(C373600048+C373600049+C373600050+C373600051+C373610348+C373610349+C
373610350+C373610351+C373620648+C373620649+C373620650+C373620651+C37
3630948+C373630949+C373630950+C373630951+C373641248+C373641249+C3736
41250+C373641251+C373651548+C373651549+C373651550+C373651551)
=(C373600053+C373610353+C373620653+C373630953+C373641253+C373651553)/
(C373600052+C373600053+C373600054+C373600055+C373610352+C373610353+C
373610354+C373610355+C373620652+C373620653+C373620654+C373620655+C37
3630952+C373630953+C373630954+C373630955+C373641252+C373641253+C3736
41254+C373641255+C373651552+C373651553+C373651554+C373651555)
=(C373600057+C373610357+C373620657+C373630957+C373641257+C373651557)/
(C373600056+C373600059+C373600057+C373600058+C373610356+C373610359+C
373610357+C373610358+C373620656+C373620659+C373620657+C373620658+C37
3630956+C373630959+C373630957+C373630958+C373641256+C373641259+C3736
41257+C373641258+C373651556+C373651559+C373651557+C373651558)
=(C373600061+C373610361+C373620661+C373630961+C373641261+C373651561)/
(C373600060+C373600061+C373600062+C373600063+C373610360+C373610361+C
373610362+C373610363+C373620660+C373620661+C373620662+C373620663+C37
3630960+C373630961+C373630962+C373630963+C373641260+C373641261+C3736
41262+C373641263+C373651560+C373651561+C373651562+C373651563)
=(C373600065+C373610365+C373620665+C373630965+C373641265+C373651565)/
(C373600064+C373600065+C373600066+C373600067+C373610364+C373610365+C
373610366+C373610367+C373620664+C373620665+C373620666+C373620667+C37
3630964+C373630965+C373630966+C373630967+C373641264+C373641265+C3736
41266+C373641267+C373651564+C373651565+C373651566+C373651567)
=(C373600069+C373610369+C373620669+C373630969+C373641269+C373651569)/
(C373600068+C373600069+C373600070+C373600071+C373610368+C373610369+C
373610370+C373610371+C373620668+C373620669+C373620670+C373620671+C37
3630968+C373630969+C373630970+C373630971+C373641268+C373641269+C3736
41270+C373641271+C373651568+C373651569+C373651570+C373651571)
=(C373600073+C373610373+C373620673+C373630973+C373641273+C373651573)/
(C373600072+C373600073+C373600074+C373600075+C373610372+C373610373+C
373610374+C373610375+C373620672+C373620673+C373620674+C373620675+C37
3630972+C373630973+C373630974+C373630975+C373641272+C373641273+C3736
41274+C373641275+C373651572+C373651573+C373651574+C373651575)
=(C373600077+C373610377+C373620677+C373630977+C373641277+C373651577)/
(C373600076+C373600077+C373600078+C373600079+C373610376+C373610377+C
373610378+C373610379+C373620676+C373620677+C373620678+C373620679+C37
3630976+C373630977+C373630978+C373630979+C373641276+C373641277+C3736
41278+C373641279+C373651576+C373651577+C373651578+C373651579)
4.7.1 Description
The KPI shows the interruption time of end user during intra-RAT handover procedure,
in terms of the control plane.
The control plane interruption times are measured from mobile traces between
RRCConnectionReconfiguration and HO Complete messages.
Number of samples
Object: cell
Unit: ms
Type: Mean
4.8.1 Description
The KPI shows the interruption time of end user during intra-RAT handover procedure,
in terms of the application layer.
The applicative interruption times are measured at application level with Wireshark
between last TCP packet received by the mobile on initial layer and first TCP packet
received by the mobile on target layer.
Number of samples
Object: cell
Unit: ms
Type: Mean
5 Integrity
5.1.1 Description
The KPI shows the connection time for an end user to attach to the network, during
which the activation of a default bearer is performed.
The corresponding connection times are measured from mobile traces between first
"RRC Connection Request" and first Attach Complete.
Object: cell
Unit: ms
Type: Mean
Attach Time
= SUM of Attach time for each successful Attach / Number of successful Attach
5.2.1 Description
The KPI shows the connection time for an end user to detach from the network when in
RRC Idle state, during which the deactivation of a default bearer is performed.
The corresponding connection times are measured from mobile traces between first
"RRC Connection Request" and first Detach Complete.
Object: cell
Unit: ms
Type: Mean
Detach Time
= SUM of Detach time for each successful Detach / Number of successful Detach
5.3.1 Description
The KPI shows the PING round trip time in the end to end communication.
The PING round trip times are measured for different Ping sizes, different scheduling
mode, different radio conditions and different locations in the cell.
Non-Scheduled, Pre-Scheduled;
Unloaded, Loaded;
Object: cell
Unit: ms
Type: Mean
N.A.
5.4.1 Description
The KPI shows the idle to active transition time the end user may experience to setup a
service.
The idle to active transition times are measured from mobile traces between the first
"RRC Connection Request" and first RRC Connection Reconfiguration Complete.
Object: cell
Unit: ms
Type: Mean
C-Plane Latency
5.5.1 Description
The KPI shows connection time for an end-user to successfully respond to each paging.
This KPI shows only the paging success time on air interface, i.e. the time between
paging being sent on air interface and UE succeeding in random access and the
following RRC establishment procedure.
Object: cell
Unit: ms
Type: Mean
= SUM of Time between Paging and RRC Connection Setup Complete / Number of
Paging records sent on the air interface
5.6.1 Description
The KPI shows the maximum throughput the cell can reach in downlink, on the
application layer.
Normally the tests need to be performed with multi-users FTP/HTTP downloading at the
same time in ideal radio conditions.
Object: cell
Unit: Mbps
Type: CUM
5.7.1 Description
The KPI shows the maximum throughput the cell can reach in uplink, on the application
layer.
Normally the tests need to be performed with multi-users FTP uploading at the same
time in ideal radio conditions.
Object: cell
Unit: Mbps
Type: CUM
5.8.1 Description
The KPI shows the average throughput the cell can reach in downlink, on the application
layer.
Normally the tests need to be performed with multi-users FTP/HTTP downloading at the
same time in evenly distributed locations in the cell.
Object: cell
Unit: Mbps
Type: CUM
5.9.1 Description
The KPI shows the average throughput the cell can reach in uplink, on the application
layer.
Normally the tests need to be performed with multi-users FTP uploading at the same
time in evenly distributed locations in the cell.
Object: cell
Unit: Mbps
Type: CUM
6 Availability
6.1.1 Description
The KPI shows probability for a cell to be available to serve the UEs in the cell.
Object: cell
Unit: Percentage
Type: Ratio
Cell Availability
7 Traffic
7.1.1 Description
The KPI shows the maximum number of RRC Connected users in the cell.
Object: cell
Unit: -
Type: MAX
= C373200029
7.2.1 Description
The KPI shows the mean number of RRC Connected users in the cell.
Object: cell
Unit: -
Type: MEAN
= C373200030
7.3.1 Description
The KPI shows the mean number of users per QCI in the cell.
Per QCI
Object: cell
Unit: -
Type: MEAN
= C373240801
= C373240802
= C373240803
= C373240804
= C373240805
= C373240806
= C373240807
= C373240808
7.4.1 Description
The KPI shows the maximum number of users with DTCH data queued in the downlink
buffer per QCI in the cell.
Per QCI
Object: cell
Unit: -
Type: MAX
= C373384331
7.5.1 Description
The KPI shows the mean number of users with DTCH data queued in the downlink
buffer per QCI in the cell.
Per QCI
Object: cell
Unit: -
Type: Mean
= C373384311
7.6.1 Description
The KPI shows the maximum number of users with DTCH data queued in the uplink
buffer per QCI in the cell.
Per QCI
Object: cell
Unit: -
Type: MAX
7.7.1 Description
The KPI shows the mean number of users with DTCH data queued in the uplink buffer
per QCI in the cell.
Per QCI
Object: cell
Unit: -
Type: Mean
7.8.1 Description
The KPI shows the average cell throughput on the PDCP layer on the downlink, i.e. the
throughput of PDCP PDU.
Object: cell
Unit: Mbps
Type: Mean
= C373343602
7.9.1 Description
The KPI shows the maximum cell throughput on the PDCP layer on the downlink, i.e. the
throughput of PDCP PDU.
Object: cell
Unit: Mbps
Type: Max
= C373343600
7.10.1 Description
The KPI shows the minimum cell throughput on the PDCP layer on the downlink, i.e. the
throughput of PDCP PDU.
Object: cell
Unit: Mbps
Type: Min
= C373343601
7.11.1 Description
The KPI shows the average cell throughput on the PDCP layer on the uplink, i.e. the
throughput of PDCP PDU.
Object: cell
Unit: Mbps
Type: Mean
= C373343605
7.12.1 Description
The KPI shows the maximum cell throughput on the PDCP layer on the uplink, i.e. the
throughput of PDCP PDU.
Object: cell
Unit: Mbps
Type: Max
= C373343603
7.13.1 Description
The KPI shows the minimum cell throughput on the PDCP layer on the uplink, i.e. the
throughput of PDCP PDU.
Object: cell
Unit: Mbps
Type: Min
= C373343604
7.14.1 Description
The KPI shows the average cell throughput on the RLC layer on the downlink, i.e. the
throughput of RLC PDU.
Object: cell
Unit: Mbps
Type: Mean
100 2013 ZTE Corporation. All rights reserved. ZTE Confidential Proprietary
ZTE LTE-FDD Key Performance Indicator Reference
= C373343662
7.15.1 Description
The KPI shows the maximum cell throughput on the RLC layer on the downlink, i.e. the
throughput of RLC PDU.
Object: cell
Unit: Mbps
Type: Max
= C373343660
7.16.1 Description
The KPI shows the minimum cell throughput on the RLC layer on the downlink, i.e. the
throughput of RLC PDU.
ZTE Confidential Proprietary 2013 ZTE Corporation. All rights reserved. 101
ZTE LTE-FDD Performance Counter Reference
Object: cell
Unit: Mbps
Type: Min
= C373343661
7.17.1 Description
The KPI shows the average cell throughput on the RLC layer on the uplink, i.e. the
throughput of RLC PDU.
Object: cell
Unit: Mbps
Type: Mean
102 2013 ZTE Corporation. All rights reserved. ZTE Confidential Proprietary
ZTE LTE-FDD Key Performance Indicator Reference
= C373343665
7.18.1 Description
The KPI shows the maximum cell throughput on the RLC layer on the uplink, i.e. the
throughput of RLC PDU.
Object: cell
Unit: Mbps
Type: Max
= C373343663
7.19.1 Description
The KPI shows the minimum cell throughput on the RLC layer on the uplink, i.e. the
throughput of RLC PDU.
ZTE Confidential Proprietary 2013 ZTE Corporation. All rights reserved. 103
ZTE LTE-FDD Performance Counter Reference
Object: cell
Unit: Mbps
Type: Min
= C373343664
7.20.1 Description
The KPI shows the average cell throughput on the MAC layer on the downlink, i.e. the
throughput of MAC PDU.
Object: cell
Unit: Mbps
Type: Mean
104 2013 ZTE Corporation. All rights reserved. ZTE Confidential Proprietary
ZTE LTE-FDD Key Performance Indicator Reference
= C373343722
7.21.1 Description
The KPI shows the maximum cell throughput on the MAC layer on the downlink, i.e. the
throughput of MAC PDU.
Object: cell
Unit: Mbps
Type: Max
= C373343720
7.22.1 Description
The KPI shows the minimum cell throughput on the MAC layer on the downlink, i.e. the
throughput of MAC PDU.
ZTE Confidential Proprietary 2013 ZTE Corporation. All rights reserved. 105
ZTE LTE-FDD Performance Counter Reference
Object: cell
Unit: Mbps
Type: Min
= C373343721
7.23.1 Description
The KPI shows the average cell throughput on the MAC layer on the uplink, i.e. the
throughput of MAC PDU.
Object: cell
Unit: Mbps
Type: Mean
106 2013 ZTE Corporation. All rights reserved. ZTE Confidential Proprietary
ZTE LTE-FDD Key Performance Indicator Reference
= C373343725
7.24.1 Description
The KPI shows the maximum cell throughput on the MAC layer on the uplink, i.e. the
throughput of MAC PDU.
Object: cell
Unit: Mbps
Type: Max
= C373343723
7.25.1 Description
The KPI shows the minimum cell throughput on the MAC layer on the uplink, i.e. the
throughput of MAC PDU.
ZTE Confidential Proprietary 2013 ZTE Corporation. All rights reserved. 107
ZTE LTE-FDD Performance Counter Reference
Object: cell
Unit: Mbps
Type: Min
= C373343724
7.26.1 Description
Object: cell
Unit: Percentage
Type: Ratio
108 2013 ZTE Corporation. All rights reserved. ZTE Confidential Proprietary
ZTE LTE-FDD Key Performance Indicator Reference
7.27.1 Description
Object: cell
Unit: Percentage
Type: Ratio
ZTE Confidential Proprietary 2013 ZTE Corporation. All rights reserved. 109
ZTE LTE-FDD Performance Counter Reference
8 Transport
8.1.1 Description
The KPI shows the total outgoing u-plane throughput of eNodeB from transport layer, i.e.
u-plane of uplink S1, u-plane of outgoing X2.
Object: eNodeB
Unit: Mbps
Type: Mean
= C373800006
8.2.1 Description
The KPI shows the total incoming u-plane throughput of eNodeB from transport layer,
i.e. u-plane of downlink S1, u-plane of incoming X2.
110 2013 ZTE Corporation. All rights reserved. ZTE Confidential Proprietary
ZTE LTE-FDD Key Performance Indicator Reference
Object: eNodeB
Unit: Mbps
Type: Mean
= C373800007
8.3.1 Description
The KPI shows the total outgoing throughput of eNodeB from transport layer, i.e. uplink
S1, outgoing X2 and uplink OAM.
Object: eNodeB
Unit: Mbps
Type: Mean
ZTE Confidential Proprietary 2013 ZTE Corporation. All rights reserved. 111
ZTE LTE-FDD Performance Counter Reference
8.4.1 Description
The KPI shows the total incoming throughput of eNodeB from transport layer, i.e.
downlink S1, incoming X2 and downlink OAM.
Object: eNodeB
Unit: Mbps
Type: Mean
8.5.1 Description
The KPI shows the total uplink S1 throughput of eNodeB from transport layer.
UL S1 total throughput
112 2013 ZTE Corporation. All rights reserved. ZTE Confidential Proprietary
ZTE LTE-FDD Key Performance Indicator Reference
Object: eNodeB
Unit: Mbps
Type: Mean
UL S1 Transport Throughput
= UL S1 total throughput
= C373900000
8.6.1 Description
The KPI shows the total downlink S1 throughput of eNodeB from transport layer.
DL S1 total throughput
Object: eNodeB
Unit: Mbps
Type: Mean
DL S1 Transport Throughput
= DL S1 total throughput
= C373900001
ZTE Confidential Proprietary 2013 ZTE Corporation. All rights reserved. 113
ZTE LTE-FDD Performance Counter Reference
8.7.1 Description
The KPI shows the total outgoing X2 throughput of eNodeB from transport layer.
Outgoing X2 throughput
Object: eNodeB
Unit: Mbps
Type: Mean
= C373900002
8.8.1 Description
The KPI shows the total incoming X2 throughput of eNodeB from transport layer.
114 2013 ZTE Corporation. All rights reserved. ZTE Confidential Proprietary
ZTE LTE-FDD Key Performance Indicator Reference
Incoming X2 throughput
Object: eNodeB
Unit: Mbps
Type: Mean
= C373900003
9.1.1 Description
The KPI shows the probability to drop paging record since the waiting queue is
overloaded.
Object: cell
ZTE Confidential Proprietary 2013 ZTE Corporation. All rights reserved. 115
ZTE LTE-FDD Performance Counter Reference
Unit: Percentage
Type: Ratio
= Number of Paging Loss From MME / Number of Paging Request From MME x 100%
9.2.1 Description
The KPI shows the average CPU load on Control & Clock board.
Object: cell
Unit: Percentage
Type: Ratio
= C373940401
116 2013 ZTE Corporation. All rights reserved. ZTE Confidential Proprietary
ZTE LTE-FDD Key Performance Indicator Reference
9.3.1 Description
The KPI shows the maximum CPU load on Control & Clock board.
Object: cell
Unit: Percentage
Type: Ratio
= C373940400
9.4.1 Description
The KPI shows the percentage of CPU load on Control & Clock board higher than the
predefined threshold.
ZTE Confidential Proprietary 2013 ZTE Corporation. All rights reserved. 117
ZTE LTE-FDD Performance Counter Reference
Object: cell
Unit: Percentage
Type: Ratio
9.5.1 Description
The KPI shows the average Memory load on Control & Clock board.
Object: cell
Unit: Percentage
Type: Ratio
118 2013 ZTE Corporation. All rights reserved. ZTE Confidential Proprietary
ZTE LTE-FDD Key Performance Indicator Reference
= C373940404
9.6.1 Description
The KPI shows the maximum Memory load on Control & Clock board.
Object: cell
Unit: Percentage
Type: Ratio
= C373940403
9.7.1 Description
The KPI shows the percentage of Memory load on Control & Clock board higher than the
predefined threshold.
ZTE Confidential Proprietary 2013 ZTE Corporation. All rights reserved. 119
ZTE LTE-FDD Performance Counter Reference
Object: cell
Unit: Percentage
Type: Ratio
120 2013 ZTE Corporation. All rights reserved. ZTE Confidential Proprietary