Beruflich Dokumente
Kultur Dokumente
CAPA.191.777.790. CAPA.191.777.790.
2008 C8 2008 C8
A-1 A-7
TOOL
Remove the top cap.
1. Hex Key
2. Special tool
A-2 A-8
Use 4mm Hex Key by Remove the spacer &
turning counter clock-wise bumper.
to loosen the bolt on the
bottom of the fork.
A-3 A-9
Separate the Crown assy. Remove the compression
From the outer casting. rod from the top of the
leg.
Disassembly Disassembly
CAPA.191.777.790. CAPA.191.777.790.
2008 C8 2008 C8
A-4 A-10
Use special tool by
turning counter clock-wise This is the parts after
to loosen the top cap. disassembly the fork.
A-5
Remove the spring
assembly.
(FOR CAPA.191.777.)
A-6
(FOR CAPA.191.777.)
Disassembly Disassembly
CAPA.191.777.790. CAPA.191.777.790.
2008 C8 2008 C8
A-11 A-17
1. Hex Key Remove the compression
2. Special tool rod from the top of the
3. T shape tool leg.
A-12 A-18
Use special tool by This is the parts after
turning counter clock-wise disassembly the fork.
to loosen the top cap.
A-13
(FOR 790.)
Disassembly Disassembly
CAPA.191.777.790. CAPA.191.777.790.
2008 C8 2008 C8
A-14
(FOR 790.)
A-15
Separate the Crown assy.
From the outer casting.
(FOR 790.)
A-16
Remove the bumper from
the compression rod.
(FOR 790.)
Assemble Assemble
CAPA.191.777.790. CAPA.191.777.790.
2008 C8 2008 C8
B-1
Install the compression
rod into the inner leg.
(FOR CAPA.191.777.)
B-2
(FOR CAPA.191.777.)
B-3
Install the top cap and
spring assembly into
the leg.
(FOR CAPA.191.777.)
Assemble Assemble
CAPA.191.777.790. CAPA.191.777.790.
2008 C8 2008 C8
B-4
(FOR CAPA.191.777.)
B-5
Install the crown assembly
into the casting.
(FOR CAPA.191.777.)
B-6
Use 4mm Hex Key to
tighten the bolt on the
bottom of the fork .
(For both side)
(FOR CAPA.191.777.)
Assemble Assemble
CAPA.191.777.790. CAPA.191.777.790.
2008 C8 2008 C8
B-7
(FOR 790.)
B-8
(FOR 790.)
B-9
(FOR 790.)
Assemble Assemble
CAPA.191.777.790. CAPA.191.777.790.
2008 C8 2008 C8
B-10
(FOR 790.)
B-11
(FOR 790.)
B-12
(FOR 790.)