Beruflich Dokumente
Kultur Dokumente
TITLE DESCRIPTION
PROJECT/JOB NO. 002
PROJECT/JOB NAME NISSEN HUT
CLIENT NAME ND
SITE NAME ND
DOCUMENT NO.
REFERENCE NO.
STRUCTURE NAME MAT_FOUND
LOAD COMBINATION GROUP NAME
REV DATE DESCRIPTION PREP'D CHK'D APPR'D APPR'D
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
10/9/2017
FOUNDATION LISTS
Group Name No. Description No. Description
RAFTBASE 1 F3
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
10/9/2017
CONTENTS
1. GENERAL
1.1 CODE & STANDARD
1.2 MATERIALS & UNIT WEIGHT
1.3 SUBSOIL CONDITION & SAFETY FACTORS
1.4 LOAD COMBINATION
2. DRAWING
2.1 LOCATION PLAN & DETAIL SKETCH
3. FOUNDATION DATA
3.1 FOOTING AND SECTION DATA
3.2 PIER DATA
3.3 LOAD CASE
3.4 LOAD COMBINATION
4. CHECK OF STABILITY
4.1 CHECK OF SLIDING
4.2 CHECK OF OVERTURNING MOMENT
4.3 CHECK OF CONTACT PRESSURE
5. DESIGN OF FOOTING
5.1 DESIGN MOMENT AND SHEAR FORCE
5.2 REQUIRED REINFORCEMENT
5.3 ONE WAY SHEAR FORCE
5.4 TWO WAY SHEAR FORCE
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
10/9/2017
1. GENERAL
1.1 CODE & STANDARD
Items Description
Design Code British Standard (BS-8110)
Horizontal Force for Wind AMERICAN SOCIETY OF CIVIL ENGINEERS [ASCE 7-02]
Horizontal Force for Seismic AMERICAN SOCIETY OF CIVIL ENGINEERS [ASCE 7-95]
Unit System Input : SI, Output : SI, Calculation Unit : SI
- Soil Capacity
Items Value
Soil Name Unit-01
Footing List F3
Qa (Soil Bearing Capacity) 100 kN/m2
Buoyancy Not Consider
WL (Water Label from the EL = 0) 0 mm
FD (Frost Depth from the EL = 0) 0 mm
Internal Friction Angle 30
Passive Soil Pressure Not Consider
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
10/9/2017
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
10/9/2017 Page 5
NOTES
* OUTPUT UNIT : mm
A01
01 1 2 3 4 5 6 7 8 9 10 11
F3
NISSEN HUT PROJECT
SQUAD CHECK
Y PROCESS PIPING VESSELS STRUCT. ELEC. INST.
AS SHOWN 002
Copyright
You (c) GS
created E&C.
this All Rights
PDF from Reserved
an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
10/9/2017
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
10/9/2017
NO
*
CL FOOTING
CL FOOTING
25600
425 2250
2500x9 425
600x2
1200
1 2 3 4 5 6 7 8 9 10 11
FOUNDATION PLAN
SQUAD CHECK
SCA
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
10/9/2017
NO
CL FOOTING
TOP BOTTOM
TYP.
T12@200
T12@200
50
T16@200
T16@200
REINFORCEMENT PLAN
SQUAD CHECK
SCA
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
10/9/2017
1 2 3 4 5 6 7 8
500
500
1 2 3 4 5 6 7 8 9 10 11
ELEVATION
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
10/9/2017 F3 Item No.
1 2
300 300 300
50 50
112.5 112.5 112.5 112.5
TYP. TYP.
75 75
112.5
112.5
300
300
300
75
75
112.5
112.5
T12 T12
75 PR.
75 PR.
30 GR.
30 GR.
30 GR.
75
75
T12 100
T12 100
400
400
400
100 @200
100 @200
T16 T16 T16
4 5
300 300 300
50 50
112.5 112.5 112.5 112.5
TYP. TYP.
75 75
112.5
112.5
300
300
300
75
75
112.5
112.5
T12 T12
75 PR.
75 PR.
30 GR.
30 GR.
30 GR.
75
75
T12 100
T12 100
400
400
400
100 @200
100 @200
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
10/9/2017 F3 Item No.
7 8
300 300 300
50 50
112.5 112.5 112.5 112.5
TYP. TYP.
75 75
112.5
112.5
300
300
300
75
75
112.5
112.5
T12 T12
75 PR.
75 PR.
30 GR.
30 GR.
30 GR.
75
75
T12 100
T12 100
400
400
400
100 @200
100 @200
T16 T16 T16
10 11
300 300
50 50
112.5 112.5 112.5 112.5
TYP. TYP.
75 75
112.5
112.5
300
300
75
75
112.5
112.5
T12 T12
8-T16 8-T16
75 PR.
75 PR.
30 GR.
30 GR.
75
75
T12 100
T12 100
400
400
100 @200
100 @200
T16 T16
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
10/9/2017
3. FOUNDATION DATA
3.1 FOOTING AND SECTION DATA
( mm ) Ft. Name F3
Ft. Type MAT
Area 30.720 m2
Ft. Thickness 500.00 mm
Ft. Volume 15.360 m3
Ft. Weight 384.000 kN
Soil Height 500.00 mm
300 300
300300
300300
300300
300300
300300
300300
300300
300300
300300
300 300 Soil Weight 1496.400 kN
1200
500
400
500
Section Data
( mm )
Ft.Name Direction Ft. Volume Soil Volume Pier Wt
3 3
F3 All Direct 15.360 m 14.964 m 9.900 kN
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
10/9/2017
Unit( kN , kN-m )
Ft.Name Pr.Name Load Case Fx Fy Fz Mx My
1 0 0 -0.9 0 0
1
2 25 0 -70 0 0
1 0 0 -0.9 0 0
2
2 25 0 -70 0 0
1 0 0 -0.9 0 0
3
2 25 0 -70 0 0
1 0 0 -0.9 0 0
4
2 25 0 -70 0 0
1 0 0 -0.9 0 0
5
2 25 0 -70 0 0
1 0 0 -0.9 0 0
6
F3 2 25 0 -70 0 0
1 0 0 -0.9 0 0
7
2 25 0 -70 0 0
1 0 0 -0.9 0 0
8
2 25 0 -70 0 0
1 0 0 -0.9 0 0
9
2 25 0 -70 0 0
1 0 0 -0.9 0 0
10
2 25 0 -70 0 0
1 0 0 -0.9 0 0
11
2 25 0 -70 0 0
Footing SW 0.000 0.000 -1880.400 0.000 0.000
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
10/9/2017
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
10/9/2017
3.4.3 Load Combination in Footing Bottom Center (With Pier & Footing SW)
Load Combination of Elastic Condition
- C.G. of Load is coordinate from left bottom. Unit : mm Unit( kN , kN-m )
Ft.Name L.Comb. Fx Fy Fz Mx My C.G. of Loads
F3 1000 275.000 0.000 -2660.300 0.000 327.185 12830.0 , 600.0
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
10/9/2017
4. CHECK OF STABILITY
4.1 CHECK OF SLIDING
Fz + P.F Fz + P.F
Formula : ( or ) > Fs -> OK (Uni-Axial)
Fx Fy
P.F = Passive Force (apply only in case checked passive force, mark by P ) Unit ( kN )
Ft.Name Dir. L.Comb. ( Fz + P.F) / Fx or ( Fz + H.P.F) / Fy Fs(i) Result
X 1000 0.35 2660.3 / 275 = 3.39 1.6 OK
F3
Y 1000 Fy = 0 , Then N/A 1.6 OK
Fz My X(i) Mx Y(i)
q1,q2 = or
Af Iy Ix
if q1 or q2 < 0 , than q1 and q2 will be recalculated
by following formula
L
q(x) width(x) X dx
Px = 0 L
0
q(x) width(x) dx
L
P= 0
q(x) width(x) dx
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
10/9/2017
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
10/9/2017
5. DESIGN OF FOOTING
5.1 DESIGN MOMENT AND SHEAR FORCE
Footing design is in accordance with unltimate strength method at footing bottom.
Calculated total pier load as
Q = Fz - Self Weight Factor (Soil Weight + Footing Weight)
Ft.Name : Footing Name , Sec.Name : Strip Name for Footing Reinforcement Design
Dir. : Direction , L.Comb. : Load Combination Index , Sl or Sw : Strip X or Y width
Unit(N/mm2,mm)
fck fy1 fy2 f_cl f_clt f_clb
25.00 410.00 410.00 50.0 50.0 80.0
The moment for reinforcement design is calculated at face of pier per any section.
The temperature and shrinkage steel is considered in the bottom layer only.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
10/9/2017
Where ,
Mux or Muy = design ultimate moment, d=effective depth, fcu(fck) = strength of concrete
fy = strength of reinforcement, z = lever arm, b = width of then setcion
If Selected As < Using As, then OK!!
Sec.Nam L.Comb. Using Bar (mm) Loc. (m) Width b (m) d (mm) As (mm )
2
Sec.Nam L.Comb. Using Bar (mm) Loc. (m) Width b (m) d (mm) As (mm )
2
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
10/9/2017
Title
1200
Fz My Moment intia
-3724.420 kN 458.058 kN-m 1677.7220 m4
Area Contact Area Critical Point Method
30.720 m2 30.720 m2 (100 %) Critical Max Point
Critical Value
Mubottom = 65.762 kN-m , Mutop = -61.216 kN-m
6 05
5
0
92
42
92
2517
49
755
25
25
42
92
42
5
32902
15
17
20
22
25
42
14
54
79
10
12
0
[ mm ]
[Loading]
[ kN , kN/m ]
141.43 142.25 143.07 143.89 144.71 145.52 146.34 147.16 147.98 148.8 149.54
141.29 149.68
[B.M.D] [ kN-m ]
-90.4
-67.8 -61.22
-46.02 -40.07
-45.2
-22.6 -5.8
5.36
-3.48 -2.13 -5.69 -2.51 -1.75 -2.43 -2.82 -2.45 -2.56 -2.55 -2.64 -2.21 -2.68 -3.46 -2.59 1.15 -5.62 -3.93
5.67
0 12.76 9.07 13.51
22.6
45.2 47.01
47.9 52.16
52.43 51.38
51.35 51.99
52.03 52.09
52.13 52.91
52.71 51.59
51.75
62.5 55.97
57.87
65.76 70.14
67.8 76.11 75.05 75.9 76.1 77.02 75.7 82.61
90.4
90.4
[B/L.M.D] [ kN-m / m ]
-75.3
-56.5 -51.01
-38.35 -33.39
-37.7
-18.8 -4.83
4.47
-2.9 -1.77 -4.74 -2.1 -1.46 -2.03 -2.35 -2.04 -2.13 -2.12 -2.2 -1.84 -2.24 -2.89 -2.16 0.96 -4.68 -3.28
4.73
0 10.64 7.56 11.26
18.8
37.7 39.18
39.92 43.47
43.69 42.82
42.79 43.33
43.36 43.41
43.44 44.09
43.92 42.99
43.12
52.09 46.64
48.23
54.8 58.45
56.5 63.43 62.54 63.25 63.42 64.18 63.08 68.84
75.34
75.3
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
10/9/2017
Title
1200
Fz Mx Moment intia
-3724.420 kN 0.000 kN-m 3.6864 m4
Area Contact Area Critical Point Method
30.720 m2 30.720 m2 (100 %) Critical Max Point
Critical Value
Mubottom = 314.243 kN-m , Mutop = 0 kN-m
00
0
0
75
45
12
0
[ mm ]
[Loading]
[ kN , kN/m ]
3103.64 3103.64
[B.M.D] [ kN-m ]
-314.2
-235.7
-157.1
-78.6
2.01 2.01
0
78.6
157.1
235.7
314.24
314.2
[B/L.M.D] [ kN-m / m ]
-12.3
-9.2
-6.1
-3.1
0.08 0.08
0
3.1
6.1
9.2
12.27
12.3
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
10/9/2017
- Shear failure at Section without shear reinforcement will occur on a plane inclined
at an angle of about 30 to the horizontal
- The enhancement of Shear Strength may be taken into account in the design of section near a support by
d
increasing the design concrete shear stress, Vec = Vc ( 2 ).
av
Where,
- The uniform load or Principal load is located farther than 2d from the face of support
Not Consider the enhancement of shear strength (Vec = Vc)
- The uniform load or Principal load is not located farther than 2d from the face of support
2d
Consider the enhancement of shear strength ( Vec = Vc ( ) , av = d )
av
Unit : mm
25600
1200
1164
1 2 3 4 5 6 7 8 9 10 11
2361
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
10/9/2017
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
10/9/2017
Title
1200
Fz My Moment intia
-3724.420 kN 458.058 kN-m 1677.7220 m4
Area Contact Area Critical Point Method
30.720 m2 30.720 m2 (100 %) Critical Max Point
Critical Value
Vu = 128.366 kN
6 05
5
0
92
42
92
2517
29 1
25
25
25
42
92
42
5
15
17
20
22
25
42
23
54
79
10
12
0
[ mm ]
[Loading]
[ kN , kN/m ]
141.43 142.25 143.07 143.89 144.71 145.52 146.34 147.16 147.98 148.8 149.54
141.29 149.68
[S.F.D] [ kN ]
208.52
208.5 187.23 170.39 181.9 180.11 181.91 182.67 183.98 184.11 188.42
148.9 160.29 158.38 160.05 160.69 161.95 161.95 166.15
156.4 128.37 137.24
100.79 98.54 99.87 100.17 101.05 100.72 104.57 114.8
104.3 89.74
60.08 53.03
52.1 38.82
0
-41.1
-52.1 -66.26
-105.96 -96.06 -99.43 -99.22 -100.05 -100.32 -101.75 -99.02 -114.34
-104.3-124.88
-164.88 -155.35 -159.07 -159.2 -160.37 -160.98 -162.7 -160.31
-156.4 -176.04
-208.5
[S/L.F.D] [ kN / m ]
173.77
173.8 156.02 141.99 151.59 150.09 151.59 152.22 153.32 153.42 157.02
124.08 133.58 131.98 133.38 133.91 134.96 134.96 138.45
130.3 106.97 114.37
84 82.12 83.23 83.47 84.21 83.93 87.14 95.67
86.9 74.78
50.06 44.19
43.4 32.35
0
-34.25
-43.4 -55.22
-88.3 -80.05 -82.86 -82.69 -83.38 -83.6 -84.79 -82.52 -95.28
-86.9-104.07
-137.4 -129.46 -132.56 -132.67 -133.64 -134.15 -135.59 -133.6
-130.3 -146.7
-173.8
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
10/9/2017
Title
1200
Fz Mx Moment intia
-3724.420 kN 0.000 kN-m 3.6864 m4
Area Contact Area Critical Point Method
30.720 m2 30.720 m2 (100 %) Critical Max Point
Critical Value
Vu = -111.732 kN
64
00
0
0
75
11
45
12
0
[ mm ]
[Loading]
[ kN , kN/m ]
3103.64 3103.64
[S.F.D] [ kN ]
1396.64
1396.6
1047.5
698.3
349.2 111.73
0 -111.73
-349.2
-698.3
-1047.5
-1396.6
[S/L.F.D] [ kN / m ]
54.56
54.6
40.9
27.3
13.6 4.36
0 -4.36
-13.6
-27.3
-40.9
-54.6
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
10/9/2017
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)