Beruflich Dokumente
Kultur Dokumente
my second internship was at Diginet system in Rabat under theme "the study of
access control of a parcking" using RFID technology, which is based in particular
on the transmission and reception of the ID code for each client, then first of all
one will read the information received by "RFID reader", then we compare it with a
database, then if the client has permission,we have to lift the arm by an electric
motor and we have to wait until the vehicle passes and we go back to the initial
state
for the programming of the embedded systems, we worked on Mp, Mc and FPGA,
concerning the Mp we used the EMU program for the Mp Intel of 16 bits, concerning
the Mc we worked by Pic 16f877 under the program Mplabe, of course for Mp and Mc we
used Assembly language as programming language which represents the low level
machine language, now concerning FPGA we worked by Altera Cyclone 2, we used VHDL
as programming language we were able to realize programs to manipulate inputs and
the outputs, on the other hand we also worked with the FPGA Xlinix Spartan 3e, we
used Labview as programming language
so when we talk about signal processing we have to talk automatically about analog-
to-digital converters, we used these two converters in the project to realize a
temperature control Pid system using the Xilinx FPGA board Spartan 3rd based
Labview.