Beruflich Dokumente
Kultur Dokumente
Super duty, 200 watt RMS power handling Ferrofluid improves the
capability. Designed especially for dual performance of high frequency and midrange
voice coil subwoofer systems, this drivers. It works by damping the impedance at
crossover features a 12 dB per resonance to effectively lower distortion, smooth
octave slope for the subwoofer. frequency response, and increase thermal
Crossover frequency: 150 Hz power handling.
(#260-220 for 8 ohm systems) or It should be used to replenish drivers treated previously
130 Hz (#260-221 for 4 ohm systems). with ferrofluid. With care, it can also upgrade most
Includes outputs for your existing speakers which drivers that have never contained ferrofluid. The kits listed are
provide a 6 dB per octave roll off at the crossover approximate fill quantities relative to approximate voice coil diameters.
frequency. Dimensions: 5-1/2" W x 4-1/4" D x 1-1/2" H. In general, the air gap should be 75% filled prior to inserting a voice coil
diaphragm assembly.
#260-221 (4 ohm, 130 Hz)
#260-220 (8 ohm, 150 Hz) . . . . . . . . . $49.99LIST $36.80(1-5) $33.75(6-UP) All of the kits shown contain synthetic ester-based ferrofluids and in most
cases should not pose any adhesive incompatibility. It is recommended that
this is confirmed by contacting the driver manufacturer prior to usage. Adding
Female Quick Disconnect Jumper ferrofluid to a driver not intended for it will, in most cases, void the original
This jumper wire is great manufacturers warranty.
when working with large Included in kit: Ferrofluid packet, absorbent paper strips for removing old
numbers of speaker ferrofluid, detailed instructions, and material safety data sheet.
connections. Whether you
are building many different Amount in List Price Price
speakers or are working Part # V.C. Size microliters (L) Price (1-3) (4-UP)
on a single speaker with many drivers, this jumper will save you time! Pre- 340-540 1" 100 $5.99 $3.90 $3.71
terminated with 0.205" non-insulated female disconnects on both ends, these 340-542 1-1/2" 300 8.99 5.90 5.60
are perfect for line arrays! 24 ga. wire 22" length. 340-544 2" 650 13.99 8.90 8.45
340-546 4" 900 19.99 12.90 12.25
#260-170 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1.89(1-7) $1.76(8-UP)
164 1-800-338-0531