Beruflich Dokumente
Kultur Dokumente
CATALOGUE
W AT E R | H E AT I N G | V E N T I L AT I O N | A I R C O N | G A S
BALANCING VALVES
BALL VALVES
BUTTERFLY VALVES
CHECK VALVES
DRAIN COCKS
GATE VALVES
GLOBE VALVES
PIPE FITTINGS
RADIATOR VALVES
STRAINERS
Introduction 1
Valve Types 2
Crane Fluid Systems is a leading manufacturer of valves, Every effort is made to ensure that when properly used, in
fittings and engineered products in the building services accordance with stated recommendations, goods
and general industrial markets. We aim to be our supplied are safe and without risk to health.
customers preferred supplier by offering products which
provide best value together with service levels that Should the purchaser be uncertain as to the suitability for
exceed our customers expectations. uses other than those stated, he/she should check with
the distributor or Crane Fluid Systems' technical team.
Customer Service
Control of Substances Hazardous to Health
The satisfaction of customer requirements is the defining
philosophy of Crane Fluid Systems. The position we hold Material supplied by Crane Fluid Systems does not
in our markets is built on the foundations of product constitute substances as defined in the approved code
availability from our network of distributors and providing of practice of COSHH but complies with the requirements
expert technical support to users of valves and pipe of the Health and Safety at Work Act (1974).
fittings. Material supplied by Crane may be handled and stored in
complete safety.
Customers orders are received via EDI, fax or telephone
by our Customer Service Administrators. Using our state- Crane products are safe to use provided they are utilised
of-the-art computer-based Enterprise Resource Planning for their intended function and used within the limitations
System, we are able to immediately confirm product specified by Crane.
availability and price. Our computers ensure orders are Note: Material is defined as equipment, supplies and
seamlessly transmitted to our Production Managers who spares that form the subject of a contract (ref. BS 4778).
regularly review factory plans to ensure customer
requirements are satisfied on time.
Quality Assurance Crane products fall into either the Sound Engineering
Practice (SEP), Category 1, Category 2 or Category 3.
Rigid quality control and inspection at all stages of
According to the directive, products classified as SEP
manufacture ensure that Crane products are fully suitable
shall not be CE marked. Category 1 products will bear the
for their intended application and will give reliable
CE mark and those products classified as Categories 2
service. Every valve and pipe fitting is individually tested
and 3 will bear the CE mark plus the number 0086. The
in accordance with the relevant product standard.
number 0086 is that of the British Standards Institute who
Crane Fluid Systems is an approved manufacturer under Crane have chosen as their Notified Body to monitor
various independent quality schemes, including the their quality assurance system as required by the
British Standards Institution (BSI) Kitemark, and is directive.
ISO9001 accredited. In addition, the company has been
approved and/or listed by various user organisations
including the United Kingdom Water Fittings Bye Laws
Sheme (WRAS approved).
Radiator Valves
Crane radiator valves are The Crane ProBalance range offers a wide variety of
manufactured from high-grade Static Balancing Valves and Flow Management Systems,
materials and use the same providing the ultimate in accuracy and reliability.
functional design as the industrial
bronze globe and gate valve
patterns. Considerations of the
Static Balancing Valves
service for which the valve is Established H&V practice
intended and also compliance with recommends that wherever
related standards influences possible within heating and chilled
dimensions, internal detail, water systems, hydraulic losses
pressure/temperature ratings and should be minimal. Thus flow
importantly, exterior appearance. measurement and regulating valves
Crane radiator valves are suitable serving such systems should
for building services installations function with pressure losses as
where durability and rugged low as efficient operation and high
construction are predominant, while accuracy will permit.
satisfying the aesthetic requirements demanded for However, in certain circumstances
modern commercial and domestic interiors. where flow velocities are low as a
result of system design, it is
equally important that adequate
MultiTherm/EtaTherm and MultiTee differential pressures are available
for accurate flow measurement. This requirement is
For control of potable hot water
achieved on the basis of a realistic compromise between
services. The Muliti-Therm family
the need for accuracy and low hydraulic loss.
enable a constant flow in the
system, maintaining temperature Crane flow measurement and regulating valves enable
and preventing dead-legs. systems design engineers to specify standard production
valves which will conform to the various system design
A thermostatic cartridge in the MultiTherm
options arising from current H&V technology, energy
MultiTherm is factory pre-set at
conservation considerations and standards legislation.
57C. Between 52C and 57C the
valve starts to close, restricting flow
and increasing temperature. When Flow Management Systems
set temperature is reached, a
minimum volume flows continuously Alongside Cranes
thus preventing dead-legs forming. range of static
EtaTherm balancing valves, the
During disinfection, the water
company can also
storage temperature needs to be
offer a range of
increased above 62C and the
bespoke Flow
MultiTherm opens to allow
Management Systems,
additional flow through the system.
designed to work
After disinfection, the valve within fixed and
automatically returns to the pre-set MultiTee variable flow systems.
position. MultiTherm is These are prefabricated units that combine the essential
recommended for systems with flow rates above 0.007 control components and connecting pipework in one
I/sec. EtaTherm is recommended for systems with flow compact module ready for simple and fast on-site
rates below 0.007 I/sec. MultiTee can be fitted at various connection. These systems are assembled to order for
points in the system to enable temperature monitoring. different specified purposes.
THREADED BRONZE D151 D151 D151 D151 D151 D151 D151X D151X D151 D151 D151 D151 - - D151 D151
THREADED DZR D151A D151A D151A D151A D151A D151A - - D151A D151A D151A D151A - - D151A D151A
FLANGED BRONZE - - DM160DM160DM160DM160DM161 DM161 - - - - - - - -
GATE
COMPRESSION BRONZE D155C - D155C - D155C - - - D155C - - - - - - -
CAST
FLANGED - FM52 - FM57 - FM63 - - - - - - - - - FM52
IRON
THREADED BRONZE D171 D171 D171 D171 D171 D171 D171 D171 D171 D171 D171 D171 D171 D171 D171 D171
ISOLATION
THREADED DZR D171A - D171A - D171A - D171A - D171A - D171A - D171A - D171A -
BALL
THREADED BRASS D191 D191 D191 D191 D191 D191 D191 D191 - - - - D191 - D191 -
COMPRESSION BRONZE D171C - D171C - D171C - - - D171C - D171C - D171C - D171C -
F621 F611/2 F611 F611/2
F621 F621/2 F621 F621/2
SEMI LUGGED - - F621 F621/2 F621 F621/2 - - F611 F611/2
WRAS WRAS WRAS WRAS REFER
BUTTERFLY DUCTILE F626 F626/7 F626 F626/7
TO
(See Note 2) IRON F614 F614/5 F614 F614/5
DM DM F624 F624/5 F624 F624/5 CRANE
LUGGED WAFER - - F624 F624/5 F624 F624/5 F614 F614/5
975G 975G WRAS WRAS WRAS WRAS
F628 F628/9 F628 F628/9
RESILIENT SEAT D140 D140 D140 D140 D140 D140 D140 D140 - - - - D140 - - -
BRONZE
SWING METAL SEAT D138 D138 D138 D138 D138 D138 D138 D138 - - - - D138 - D138 -
NON RETURN
STRAINER
CAST
Y-TYPE FLANGED - - - FM276 - FM276 FM278 FM278 - - - - - FM276 - FM276
IRON
MALLEABLE
THREADED F273 - F273 - F273 - F273 - - - - - - - - -
IRON
D171 - D171 - D171 D171 D171
DRAW OFF BALL BRONZE - - - - - - - - -
DRAINING
D886
TRV - - - -
+T90 TRV HEAD REMOTE TRANSMITTER
D886
STRAIGHT HANDWHEEL - - - - 2 METRES = D889 RT2
+T80
8 METRES = D889 RT8
LOCKSHIELD - - D886 - -
BODY
FUNCTION TYPE THREADED FLANGED
MATERIAL
BRONZE D921/D923* -
DOUBLE CAST IRON - DM925G DM975G
REGULATION DRV REGULATING
VALVE
DUCTILE
- DM921
IRON
D901
DZR -
FMD FLOW D902*
FLOW
MEASUREMENT
MEASUREMENT STAINLESS
DEVICE - DM900
STEEL
D921 + D901
DRV FMD
BRONZE -
DOUBLE
D923* + D902*
REGULATING
DRV FMD
DRV VALVE
TWO
+ +
UNIT
FMD FLOW DUCTILE DM921 DRV
-
MEASUREMENT IRON DM900 FMD
DEVICE
DM925G DRV
CAST IRON - DM975G DRV
DM900 FMD
CIRCUIT
D931 D981P
BALANCING
BRONZE D933* D983P* -
D934** D984P**
FIXED ORIFICE
FODRV DOUBLE
REGULATING CAST IRON - DM950G
VALVE
SINGLE DUCTILE
UNIT - DM941/DA941
IRON
VARIABLE
ORIFICE
DUCTILE DM931
VODRV DOUBLE -
IRON DA931
REGULATING
VALVE
DZR
Bronze
Bronze (Threaded)
Bronze (Flanged)
Brass (Threaded)
Cast Steel
Bronze (Threaded)
Figure number: D4 1
/4" 44 0.23
PN20 BS 5154 SERIES B 3
/8" 44 0.22
Bronze globe valve 1
/2" 55 0.31
Metal disc, Screwed bonnet 3
/4" 63 0.42
Female threaded ends to BS 21 or NPT 1" 77 0.71
1
/4" to 2 BS 21 versions kitemarked 11/4" 91 1.12
11/2" 98 1.50
2" 118 2.48
Figure number: D7 1
/4" 52 0.50
PN32 BS 5154 SERIES B 3
/8" 52 0.49
Bronze globe valve 1
/2" 62 0.73
Renewable disc, Union bonnet 3
/4" 74 1.09
Female threaded ends to BS 21 or NPT 1" 90 1.74
1
/4" to 3 BS 21 versions kitemarked 11/4" 100 2.44
11/2" 115 3.32
2" 136 5.54
21/2" 184 10.90
3" 210 16.40
Bronze (Threaded)
Cast Steel
Bronze
Malleable Iron
Cast Iron
Cast Iron
Cast Steel
DZR
Brass
Bronze
Nitrile Liner
Crane Butterfly valves are also available to suit ANSI 125 end connections. Consult Crane for details.
Crane Butterfly valves are also available to suit ANSI 125 end connections. Consult Crane for details.
Crane Butterfly valves are also available to suit ANSI 125 end connections. Consult Crane for details.
P83
Compression ends D921, D923, D931, D933, D934, D981P, D983P, D984P, when
connecting to copper pipe in accordance with BSEN1057 table 4. (R250 Half Hard Copper).
1/2 (15mm) Kit = Part No 0JG91118S 3/4 (22mm) Kit = Part No 0JG9119T
Bronze
Cast Iron
Ductile Iron
Malleable Iron
Accessories
Drain Cocks
CommPac Manifold
Commissioning System
Up to six terminals can be served from a single Fan coil units can be flushed, vented and balanced
CommPac unit. without the time-consuming looping out procedure.
All units are custom built to suit site specification. This can be carried out by one commissioning
engineer instead of a team.
All site connections can be made without the need to
access the internal components. A single strainer serves all circuits, eliminating the
need for individual strainers.
CommPac is suitable for variable flow or constant flow
systems. All systems can be flushed through the unique
Dominator H body.
All connections are BSPT Female, enabling standard pipe
or specialist adapters to be used. The single DPCV maintains constant differential
pressure between manifolds.
CommPac modules are built to suit individual project design To streamline this selection process we have developed
requirements. Correct selection of balancing valves and software that allows all variables to be considered and
differential pressure control valves is essential to ensure best valve options selected. The selection programme is
comfort control and used by Crane Sales/Technical staff to input customer
system efficiency. Flow information throughout the design
rates, Pipe sizes, Pipe process and ensure that the
materials, and Pipe optimum design is achieved.
losses all have to be
calculated to ensure The outputs from the selection
that each CommPac software are used by Consultants,
module contains the Contractors, Commissioning
correct combination of Engineers, and our own Production
products to achieve team, ensuring consistency
the best results. throughout the whole process.
Dominator Z3000
Flow Management System for Fan Coil Units
Specification
The unique bypass valve unit comprises two T-ported ball
valves allowing easy back flushing, forward flushing and
isolation. The position of the T-handle gives clear
indication of flow/bypass mode. Designed around 3/4
full bore ball for optimum flow, can be adapted to 1/2,
3/4 and 1 end connections. Simple attachment to
existing hangers. The strainer unit has an integral drain
cock and pressure test point enabling measurement of
pressure drop across load and allowing for flushing of
strainer and coil without need to remove basket.
Application
The Z3000 is a prefabricated unit combining the essential
control components and connecting pipework associated
with fan coils, into one compact, fully assembled unit
ready for simple and fast on-site connection.
Z3000 series features the Crane ProBalance Fixed Both series provide versions for heated and chilled water
Orifice Double Regulating valve D931. systems and combinations with and without drains and
strainers.The versions for chilled water systems include
Z3900 series features the Crane MotoBalance Fixed extension stems (EXS) on the ball valve T-handles to
Orifice Double Regulating valve D981P, suitable for allow for lagging. The Z3000 series also includes low flow
use with actuator. and ultra low flow versions.
This series utilises the Crane ProBalance Valves D931, D933 or D934 depending on flow rate required.
All selections are made by Crane and each unit is tagged with individual fan coil ref nos to assist contractors with site
assembly. Extension stems are fitted to isolation ball valves for chilled water services.
This series utilises the Crane MotoBalance Valves D981P, D983P or D984P depending on flow rate required.
The MotoBalance offers on/off or modulating control with equal percentage characteristics.
All selections are made by Crane and each unit is tagged with individual fan coil ref nos to assist contractors with site
assembly. Extension stems are fitted to isolation ball valves for chilled water services.
FIG NO. PAGE FIG NO. PAGE FIG NO. PAGE FIG NO. PAGE
Plain Plug Solid Countersunk Plug Backnut Parallel Elbow M & F Elbow
Thread to BS 2779
Socket Parallel Socket Taper Thread Socket Reducing Eccentric Socket Cap
Thread to BS 2779
Return Bend Round Flange Union Flat Seat Union Spherical Seat M & F Union Spherical
Iron to Iron Seat Iron to Iron
Elbow Union Spherical M & F Elbow Union Union Spherical Seat M & F Union Spherical Elbow Union Spherical
Seat Iron to Iron Spherical Seat Bronze to Iron Seat Bronze to Iron Seat Bronze to Iron
Iron to Iron
M & F Elbow Union Union Spherical Seat Union Self Aligning *Available in Bronze
Spherical Seat Bronze to Bronze (SA)
Bronze to Iron
www.cranefs.com
www.cranebsu.com