Beruflich Dokumente
Kultur Dokumente
H D D M I N I N G A N D WAT E R W E L L
S I M U L AT I O N S O F T WA R E
P R E S S U R E C O N T R O L : D - G A S S E R S
WASTE INJECTION
The centrifugal D-GASSER units requires less energy to operate
D-GASSER units use a patented, remove all of the entrained gases with UL-approved, 25-hp,
centrifugal-force system rather from the drilling fluids in the explosion-proof 230/460 VAC
than conventional vacuum or return flow by using high-speed 3-phase 60-Hz motor.
centrifugal force. Self-contained. The unit is
impact systems.
RIG-EQUIPMENT ENGINEERING
Reduces potential blowouts. complete with centrifugal cylin-
M-I SWACO D-GASSER units exert
The removal of entrained gases, der unit, screens, electric motor
centrifugal force to the mud, multi- including H2S and corrosive and mount.
plying the force acting on the gas oxygen, from drilling fluids High performance. Provides
bubbles to increase buoyancy and reduces the threat of dangerous lowest hp/GPM throughput
C U T T I N G S T R E AT M E N T
nates the need for rig-floor space.
and are further broken down
by flow turbulence.
The freed gas and the gas-free
mud are then separately discharged A R R A N G E M E N T D R AW I N G :
CD-1400 CENTRIFUGAL D-GASSER
as desired.
All dimensions
are expressed in
inches (millimeters).
CD-1400
SOLIDS CONTROL
Centrifugal D-GASSER N2
19.9
(505.5)
23.8
(604.5)
N1
20.8
13.2 (528.3)
41.5 (335.3)
(1,054.1)
PRESSURE CONTROL
121.9 21
0.9 typ
(3,096.3) (533.4)
(22.9)
71.7 on 37.7 B.C.
(1,821.2) 21.2 (957.6)
67.1 24
(538.5)
(1,704.3) 10 typ
64.9 typ
59.4 (1,648.5)
(1,508.8)
C U T T I N G S H A N D L I N G A N D T R A N S P O R TAT I O N
Notes
N1 Mud discharge nozzle
6 in. (152.4 mm)
N2 Gas discharge nozzle
2.5 in. (63.5 mm)
A L P I N E S P E C I A LT Y C H E M I C A L S
R I G I N S T R U M E N TAT I O N
183