Beruflich Dokumente
Kultur Dokumente
A Tridelta Group
Company
Storage, mixing and discharge of bulk materials with average When fitting-out large silo areas with aeration units, it is
particle sizes of less than 0.1 mm frequently causes problems advantageous to divide them into sectors each of which can be
because these bulk materials do not flow freely and therefore are interchangeably aerated. The sectors can be arranged in a radial
almost impossible to discharge. They tend to agglomerate and form pattern or laid out concentrically starting from an inner ring.
bridges and tunnels, particularly around the silo outlet, thereby
obstructing the free flow of the material from the storage vessel.
Such low flowable materials include fine plastic powders, flour,
Hopper wall
pigments, soot, cement, pesticides etc. These bulk materials are very
difficult to discharge without some sort of discharge aid.
A proven solution to such problems is the fluidization of the bulk
materials using pneumatic aerating units made from highly porous
SIPERM-materials. These aeration units ensure continuous flow of
materials at the precise points in vessels where problems occur. Compressed
air
You can choose between custom-made aeration bottoms, cones or Fig. 1: Functioning of
SIPERM-aeration
inserts which we manufacture to your specifications, sheet material inserts Porous fluidization sheet
for adapting to your own systems or standard aeration pads which Outlet
Fig. 2:
fluidization insert made from SIPERM-R
A Tridelta Group
Company
A Tridelta Group
Company