Beruflich Dokumente
Kultur Dokumente
2.3 Two tanks are connected together in the kg/min, w2 = 100 kg/min, and w3 = 200
following unusual way in Fig. E2.3. kg/min. At that point, inlet flow rate w1 is
adjusted so that the level remains constant.
However, on this particular day, corrosion
of the tank has opened up a hole in the
wall at height of 1 m, producing a leak
whose volumetric flow rate q4 (m3/min)
can be approximated by
(a) Develop a model for this system that where h is height in meters.
can be used to find h1, h2, and w3 as
(a) If the tank was initially empty, how
functions of time for any given
long did it take for the liquid level to
variations in inputs.
reach the corrosion point?
(b) Perform a degrees of freedom analysis.
(b) If mass flow rates w1, w2, and w3 are
Identify all input and output variables.
kept constant indefinitely, will the tank
eventually overflow? Justify your
Notes:
answer.
The density of the incoming liquid, , is
constant.
The cross-sectional areas of the tanks are A1
and A2.
w2 is positive for flow from Tank 1 to Tank 2.
The two valves are linear with resistances R2
and R3.