Beruflich Dokumente
Kultur Dokumente
MPa: 1N/mm2 or 1,000,000N/m2 Overturning Moment It refers to a piece or pair of diagonal braces to resist
wind or other horizontal forces on a building.
1 GPa: 1,000N/m2 or 1,000,000,000N/m2
Girder:
Bending Flexure of Circular Timber Beam: Fb =
Beam carrying a beam.
Bending Flexure of Rectangular Timber Beam: Fb =
Major horizontal supporting member of the floor system.
General Formula for bending flexure: =
, Fb =
, =
STRUCTURAL ASSESSMENT
The primary reason for using pinned connection is: Shear stress - A force acting perpendicular to the surface of an object which
tend the material to slip past the adjacent part.
To allow relatively free end rotation of connection members
To make the analysis simpler Effective length The distance between inflection point in the column when it
To allow for better load distribution breaks.
Neutral Axis Imaginary line passing through the centroid of the cross-section Buckling load The load at which a perfectly straight member under
of a beam, along which no bending stresses occur. compression assumes a deflected position.
Span The distance measured along full the full length of a beam.
Clear span The distance between inner faces of the supports of a beam.
Effective span The center to center distance between the supports of a beam.