Beruflich Dokumente
Kultur Dokumente
Caliper Highlights:
Wilwoods PS-1 Caliper is compact, lightweight (only .93 pounds)
and combines the strength of cast aluminum construction with a
sleek low profile design. This caliper utilizes two stainless
steel 1.00 diameter deep cup pistons to minimize heat transfer
from the .30 thick pad to the brake fluid while employing high
temperature square piston seals to control piston retraction.
Internal crossover brake fluid passages eliminate the use of
external crossover tubes. The PS-1 fits rotors with diameters
ranging from 6.00 to 9.00, thickness sizes from .15 to .20 and
comes with a industry standard 1/8-27 NPT or M10 x 1.25
inlet. Designed, engineered and manufactured in the U.S.A.
ORDERING INFORMATION:
PART NUMBERS
BORE SIZE ROTOR WIDTH MOUNTING RH LH
1.00 25,4 mm .20 5,1 mm 2.50 63,5 mm 120-5453 120-5456
1.12 28,4 mm .20 5,1 mm 2.50 63,5 mm 120-8373 120-8374
INLET
FITTING* 1.22 (30,9)
MOUNT HEIGHT
.41 (10,4) EAR
4.94 (125,5) THICKNESS
MOUNTING
OUTSIDE RADIUS 2.50 (63,5) .83 (21,1)
BOSS
8.00 (203,2) ROTOR MOUNT CENTER "D1" MOUNT OFFSET
.80 (20,3) DIA
MOUNT HOLE* DIMENSION "D1" = (DISC DIAMETER/2) - 1.22 (30,9)
DISC / WHEEL CENTER LINE NOTE: RIGHT HAND CALIPER SHOWN
*P/N 120-5453/56 USES 1/8-27 NPT INLET FITTING WITH A .32 (8,1) MOUNT HOLE
*P/N 120-8373/74 USES M10 x 1.25 INLET FITTING WITH A M8 x 1.25 (31,8) MOUNT HOLE
4700 Calle Bolero Camarillo, CA 93012 www.wilwood.com Sales: (805) 388-1188 For More Information, e-mail: info@wilwood.com
40 REV DATE: 01-12-15