Beruflich Dokumente
Kultur Dokumente
SOLAR MODULES
BP280F & BP275F
SOLAR MODULES APPLICATIONS
PRODUCT FEATURES GRID-CONNECT
High efficiency monocrystalline Rain-screen Faades Multi-Kilowatt and
Megawatt Power
silicon cells. Sun-shade & Balcony
Stations
Products
Designed for maximum Roofing Products Generator-type
Power for centralised
reliability and minimum Domestic/Residential locations.
Roof Products
maintenance.
Produced using in-house
technology in cell
manufacturing and
TELECOMS
Microwave Repeaters TV Translators
encapsulation. and Terminals. Radio Telephones &
VHF/UHF Radio Telemetry.
Highly resistant to water, Systems and Radio Navigational
abrasion, hail impact and other Repeaters. Aids
environmental factors. Mobile Radio Fibre Optic Repeaters
Systems.
Miscellaneous
Lightweight anodised HF/SSB Radio Packages DC Loads
aluminium frame or laminate Transceivers
version only.
All proven products. Only RURAL
materials with extensive field INFRASTRUCTURE
experience used. Community/Village Community/Village
Water Pumping Lighting
Designed and manufactured to Community/Village
Community/Village
comply with European and Water Purification Television & Video
International standards. Community/Village Individual House
Power
European specification ESTI503. Refrigeration,
Medical and Domestic Community/Village
20 year product warranty Power
SPECIALIST
Cathodic Protection Racon Systems
Aircraft Obstruction Beacon Buoy Lighting
Lighting Systems
Lighthouse Lighting Fog Warning Systems
Systems
TECHNICAL SPECIFICATIONS
Module Catalogue Number BP280 BP275
Nominal Peak Power (Pmax) 80.00W 75.00W
Voltage @ maximum power (V mp) 17.00V 17.00V
Current @ maximum power (I mp) 4.70A 4.45A
Short-circuit current (I sc) 5.0A 4.75A
Open-circuit Voltage (V oc) 21.8V 21.40V
Dimensions F=Framed L=Laminate
CELL SPECIFICATIONS BP275/280F Length 1188 mm Width 530 mm
36 series connected, 125 mm Depth 43.5 mm Weight 7.5 kg
monocrystalline silicon BP275/280L Length 1183 mm Width 525 mm
pseudo square cells. Depth 4 mm (1 mm) Weight 5.5 kg
HIGH EFFICIENCY BP280F/BP275F MODULES
POWER SPECIFICATIONS VOLTAGE/CURRENT CURVE (Nominal)
All performance specifications given are as measured at the The graph below details module performance at an
standard test conditions. insolation of 1000 W/m2, air mass 1.5 D
Tolerance Minimum power, the peak power of all high power modules is normally supplied within minus 5watts actual of the nominal
value, for further details contact BP Solar.
Coefficient of Voltage -0.0022 V/cell/C
Coefficient of Current 8.9 mA/cm2/C
Hot spot endurance (to simulate partial shading). conduit) are provided to
Mechanical endurance, to simulate wind loads of up to facilitate series and/or
225 km/h. parallel connection.
Power specifications are measured at Standard BP Solar Test BP SOLAR
Conditions. For further information on module performance
MODULE TYPE: BP275F
contact BP Solar. NOMINAL PEAK POWER (P max) : 75.00
PEAK POWER VOLTAGE (Vmp) : 17.00
PEAK POWER CURRENT (Imp) : 4.45
Approved by TV Rheinland Group for use as Class II SHORT CIRCUIT CURRENT (Isc)
OPEN CIRCUIT VOLTAGE (Voc)
:
:
4.75
21.40
equipment, Schutzklasse II. MINIMUM POWER (P min)
5
: 70.00
Isc
P max
Imp
A 4
CONSTRUCTION m
p
e
3
Vmp Voc
fasteners are used throughout. The junction box is bonded 0
Vo l t s
directly to the laminate to facilitate both framed and laminate Power specifications measured at Standard Test Conditions,
Insolation of 1000W/m2, AM 1.5, 25C cell temperature