Beruflich Dokumente
Kultur Dokumente
[R1-Serial1/0/1]
Oct 24 2017 22:36:21-08:00 R1 %%01IFNET/4/LINK_STATE(l)[15]:The line
protocol PP
P on the interface Serial1/0/1 has entered the DOWN state.
[R1-Serial1/0/1]
Oct 24 2017 22:36:21-08:00 R1 %%01IFPDT/4/IF_STATE(l)[16]:Interface
Serial1/0/1
has turned into DOWN state.
[R1-Serial1/0/1]
Oct 24 2017 22:36:21-08:00 R1 %%01IFPDT/4/IF_STATE(l)[17]:Interface
Serial1/0/1
has turned into UP state.
[R1-Serial1/0/1]
Oct 24 2017 22:36:21-08:00 R1 %%01IFNET/4/LINK_STATE(l)[18]:The line
protocol IP
on the interface Serial1/0/1 has entered the UP state.
[R1-Serial1/0/1]quit
[R1]ospf 10
[R1-ospf-10]area 0
[R1-ospf-10-area-0.0.0.0]network 10.10.1.0 0.0.0.255
[R1-ospf-10-area-0.0.0.0]area network 10.10.2.0 0.0.0.25
[R1-ospf-10-area-0.0.0.0]network 10.10.2.0 0.0.0.255
[R1-ospf-10-area-0.0.0.0]quit
[R1-ospf-10]
Oct 24 2017 22:42:22-08:00 R1 %%01OSPF/4/NBR_CHANGE_E(l)[19]:Neighbor
changes ev
ent: neighbor status changed. (ProcessId=2560, NeighborAddress=2.1.10.10,
Neighb
orEvent=HelloReceived, NeighborPreviousState=Down,
NeighborCurrentState=Init)
[R1-ospf-10]
Oct 24 2017 22:42:31-08:00 R1 %%01OSPF/4/NBR_CHANGE_E(l)[20]:Neighbor
changes ev
ent: neighbor status changed. (ProcessId=2560, NeighborAddress=2.1.10.10,
Neighb
orEvent=2WayReceived, NeighborPreviousState=Init,
NeighborCurrentState=ExStart)
[R1-ospf-10]
Oct 24 2017 22:42:31-08:00 R1 %%01OSPF/4/NBR_CHANGE_E(l)[21]:Neighbor
changes ev
ent: neighbor status changed. (ProcessId=2560, NeighborAddress=2.1.10.10,
Neighb
orEvent=NegotiationDone, NeighborPreviousState=ExStart,
NeighborCurrentState=Exc
hange)
[R1-ospf-10]
Oct 24 2017 22:42:31-08:00 R1 %%01OSPF/4/NBR_CHANGE_E(l)[22]:Neighbor
changes ev
ent: neighbor status changed. (ProcessId=2560, NeighborAddress=2.1.10.10,
Neighb
orEvent=ExchangeDone, NeighborPreviousState=Exchange,
NeighborCurrentState=Loadi
ng)
[R1-ospf-10]
Oct 24 2017 22:42:31-08:00 R1 %%01OSPF/4/NBR_CHANGE_E(l)[23]:Neighbor
changes ev
ent: neighbor status changed. (ProcessId=2560, NeighborAddress=2.1.10.10,
Neighb
orEvent=LoadingDone, NeighborPreviousState=Loading,
NeighborCurrentState=Full)
[R1-ospf-10]
Oct 24 2017 22:43:07-08:00 R1 %%01OSPF/4/NBR_CHANGE_E(l)[24]:Neighbor
changes ev
ent: neighbor status changed. (ProcessId=2560, NeighborAddress=2.2.10.10,
Neighb
orEvent=HelloReceived, NeighborPreviousState=Down,
NeighborCurrentState=Init)
[R1-ospf-10]
Oct 24 2017 22:43:07-08:00 R1 %%01OSPF/4/NBR_CHANGE_E(l)[25]:Neighbor
changes ev
ent: neighbor status changed. (ProcessId=2560, NeighborAddress=2.2.10.10,
Neighb
orEvent=2WayReceived, NeighborPreviousState=Init,
NeighborCurrentState=ExStart)
[R1-ospf-10]
Oct 24 2017 22:43:07-08:00 R1 %%01OSPF/4/NBR_CHANGE_E(l)[26]:Neighbor
changes ev
ent: neighbor status changed. (ProcessId=2560, NeighborAddress=2.2.10.10,
Neighb
orEvent=NegotiationDone, NeighborPreviousState=ExStart,
NeighborCurrentState=Exc
hange)
[R1-ospf-10]
Oct 24 2017 22:43:07-08:00 R1 %%01OSPF/4/NBR_CHANGE_E(l)[27]:Neighbor
changes ev
ent: neighbor status changed. (ProcessId=2560, NeighborAddress=2.2.10.10,
Neighb
orEvent=ExchangeDone, NeighborPreviousState=Exchange,
NeighborCurrentState=Loadi
ng)
[R1-ospf-10]
Oct 24 2017 22:43:07-08:00 R1 %%01OSPF/4/NBR_CHANGE_E(l)[28]:Neighbor
changes ev
ent: neighbor status changed. (ProcessId=2560, NeighborAddress=2.2.10.10,
Neighb
orEvent=LoadingDone, NeighborPreviousState=Loading,
NeighborCurrentState=Full)
[R1-ospf-10]
Please check whether system data has been changed, and save data in
time
<R1>system-view
Enter system view, return user view with Ctrl+Z.
[R1]ping 10.10.7.1
PING 10.10.7.1: 56 data bytes, press CTRL_C to break
Request time out
Request time out
Request time out
Request time out
Request time out
[R1]ping 10.10.7.1
<R1>
Please check whether system data has been changed, and save data in
time
R2
<R2>
Please check whether system data has been changed, and save data in
time
<R2>system-view
Enter system view, return user view with Ctrl+Z.
[R2]ospf 10
[R2-ospf-10]}area 0
^
Error: Unrecognized command found at '^' position.
[R2-ospf-10]area 0
[R2-ospf-10-area-0.0.0.0]undo network 10.10.4.0
^
Error:Incomplete command found at '^' position.
[R2-ospf-10-area-0.0.0.0]undo network 10.10.4.0 0.0.0.255
[R2-ospf-10-area-0.0.0.0]
<R2>system-view
Enter system view, return user view with Ctrl+Z.
[R2]ip route-static 10.10.7.0 24 10.10.4.2
[R2]ping 10.10.4.2
PING 10.10.4.2: 56 data bytes, press CTRL_C to break
Reply from 10.10.4.2: bytes=56 Sequence=1 ttl=255 time=110 ms
Reply from 10.10.4.2: bytes=56 Sequence=2 ttl=255 time=10 ms
Reply from 10.10.4.2: bytes=56 Sequence=3 ttl=255 time=10 ms
Reply from 10.10.4.2: bytes=56 Sequence=4 ttl=255 time=20 ms
Reply from 10.10.4.2: bytes=56 Sequence=5 ttl=255 time=20 ms
[R2]ping 10.10.1.2
PING 10.10.1.2: 56 data bytes, press CTRL_C to break
Reply from 10.10.1.2: bytes=56 Sequence=1 ttl=255 time=30 ms
Reply from 10.10.1.2: bytes=56 Sequence=2 ttl=255 time=1 ms
Reply from 10.10.1.2: bytes=56 Sequence=3 ttl=255 time=1 ms
Reply from 10.10.1.2: bytes=56 Sequence=4 ttl=255 time=1 ms
Reply from 10.10.1.2: bytes=56 Sequence=5 ttl=255 time=1 ms
[R2]ping 10.10.3.2
PING 10.10.3.2: 56 data bytes, press CTRL_C to break
Reply from 10.10.3.2: bytes=56 Sequence=1 ttl=255 time=20 ms
Reply from 10.10.3.2: bytes=56 Sequence=2 ttl=255 time=20 ms
Reply from 10.10.3.2: bytes=56 Sequence=3 ttl=255 time=30 ms
Reply from 10.10.3.2: bytes=56 Sequence=4 ttl=255 time=30 ms
Reply from 10.10.3.2: bytes=56 Sequence=5 ttl=255 time=10 ms
[R2]ping 10.10.4.2
PING 10.10.4.2: 56 data bytes, press CTRL_C to break
Reply from 10.10.4.2: bytes=56 Sequence=1 ttl=255 time=20 ms
Reply from 10.10.4.2: bytes=56 Sequence=2 ttl=255 time=20 ms
Reply from 10.10.4.2: bytes=56 Sequence=3 ttl=255 time=20 ms
Reply from 10.10.4.2: bytes=56 Sequence=4 ttl=255 time=10 ms
Reply from 10.10.4.2: bytes=56 Sequence=5 ttl=255 time=10 ms
[R2]ping 10.10.8.10
PING 10.10.8.10: 56 data bytes, press CTRL_C to break
Request time out
Reply from 10.10.8.10: bytes=56 Sequence=2 ttl=126 time=30 ms
Reply from 10.10.8.10: bytes=56 Sequence=3 ttl=126 time=30 ms
Reply from 10.10.8.10: bytes=56 Sequence=4 ttl=126 time=30 ms
Reply from 10.10.8.10: bytes=56 Sequence=5 ttl=126 time=20 ms
[R2]show current
^
Error: Unrecognized command found at '^' position.
[R2]show current-
^
Error: Unrecognized command found at '^' position.
[R2]show current
[R2]dis?
display Display information
[R2]display current
[R2]display current-configuration
[R2]display current-configuration
[V200R003C00]
#
sysname R2
#
board add 0/1 2SA
board add 0/2 2SA
#
snmp-agent local-engineid 800007DB03000000000000
snmp-agent
#
clock timezone China-Standard-Time minus 08:00:00
#
portal local-server load portalpage.zip
#
drop illegal-mac alarm
#
set cpu-usage threshold 80 restore 75
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password cipher %$%$K8m.Nt84DZ}e#<0`8bmE3Uw}%$%$
local-user admin service-type http
#
firewall zone Local
priority 15
#
interface Serial1/0/0
link-protocol hdlc
ip address 10.10.1.2 255.255.255.0
#
interface Serial1/0/1
link-protocol ppp
ip address 10.10.4.1 255.255.255.0
#
interface Serial2/0/0
link-protocol hdlc
ip address 10.10.3.1 255.255.255.0
#
interface Serial2/0/1
link-protocol ppp
#
interface GigabitEthernet0/0/0
#
interface GigabitEthernet0/0/1
#
interface GigabitEthernet0/0/2
#
interface NULL0
#
ospf 10
area 0.0.0.0
network 10.10.1.0 0.0.0.255
network 10.10.3.0 0.0.0.255
#
ip route-static 10.10.7.0 255.255.255.0 10.10.4.2
ip route-static 10.10.8.0 255.255.255.0 10.10.3.2
ip route-static 10.10.9.0 255.255.255.0 10.10.3.2
#
user-interface con 0
authentication-mode password
user-interface vty 0 4
user-interface vty 16 20
#
wlan ac
#
return
[R2]ospf 10
[R2-ospf-10]import-route static
[R2-ospf-10]
<R2>system-view
Enter system view, return user view with Ctrl+Z.
[R2]undo ip route-static 10.10.8.0 24 10.10.3.2
[R2]undo ip route-static 10.10.9.0 24 10.10.3.2
R3
[R3-ospf-10-area-0.0.0.0]network 10.10.3.0 0.0.0.255
[R3-ospf-10-area-0.0.0.0]quit
[R3-ospf-10]quit
[R3]
Oct 24 2017 22:44:04-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[27]:Neighbor
changes ev
ent: neighbor status changed. (ProcessId=2560, NeighborAddress=1.3.10.10,
Neighb
orEvent=HelloReceived, NeighborPreviousState=Down,
NeighborCurrentState=Init)
[R3]
Oct 24 2017 22:44:04-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[28]:Neighbor
changes ev
ent: neighbor status changed. (ProcessId=2560, NeighborAddress=1.3.10.10,
Neighb
orEvent=2WayReceived, NeighborPreviousState=Init,
NeighborCurrentState=ExStart)
[R3]
Oct 24 2017 22:44:04-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[29]:Neighbor
changes ev
ent: neighbor status changed. (ProcessId=2560, NeighborAddress=1.3.10.10,
Neighb
orEvent=NegotiationDone, NeighborPreviousState=ExStart,
NeighborCurrentState=Exc
hange)
[R3]
Oct 24 2017 22:44:04-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[30]:Neighbor
changes ev
ent: neighbor status changed. (ProcessId=2560, NeighborAddress=1.3.10.10,
Neighb
orEvent=ExchangeDone, NeighborPreviousState=Exchange,
NeighborCurrentState=Loadi
ng)
[R3]
Oct 24 2017 22:44:04-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[31]:Neighbor
changes ev
ent: neighbor status changed. (ProcessId=2560, NeighborAddress=1.3.10.10,
Neighb
orEvent=LoadingDone, NeighborPreviousState=Loading,
NeighborCurrentState=Full)
[R3]ospf 10
[R3-ospf-10]area 0
[R3-ospf-10-area-0.0.0.0]network 10.10.5.0 0.0.0.255
[R3-ospf-10-area-0.0.0.0]network 10.10.6.0 0.0.0.255
[R3-ospf-10-area-0.0.0.0]
<R3>
Please check whether system data has been changed, and save data in
time
<R3>system-view
Enter system view, return user view with Ctrl+Z.
[R3]ospf 10
[R3-ospf-10]area 0
[R3-ospf-10-area-0.0.0.0]no network 10.10.5.0 0.0.0.255
^
Error: Unrecognized command found at '^' position.
[R3-ospf-10-area-0.0.0.0]undo network 10.10.5.0 0.0.0.255
[R3-ospf-10-area-0.0.0.0]undo network 10.10.6.0 0.0.0.255
[R3-ospf-10-area-0.0.0.0]
<R3>system-view
Enter system view, return user view with Ctrl+Z.
[R3]ip route-static 10.10.8.0 24 10.10.5.2
[R3]ip route-static 10.10.9.0 24 10.10.6.2
[R3]
Please check whether system data has been changed, and save data in
time
<R3>system-view
Enter system view, return user view with Ctrl+Z.
[R3]ip route-static 10.10.7.0 24 10.10.3.1
[R3]ping 10.10.7.10
PING 10.10.7.10: 56 data bytes, press CTRL_C to break
Request time out
Reply from 10.10.7.10: bytes=56 Sequence=2 ttl=126 time=20 ms
Reply from 10.10.7.10: bytes=56 Sequence=3 ttl=126 time=30 ms
Reply from 10.10.7.10: bytes=56 Sequence=4 ttl=126 time=30 ms
Reply from 10.10.7.10: bytes=56 Sequence=5 ttl=126 time=30 ms
Please check whether system data has been changed, and save data in
time
<R3>system-view
Enter system view, return user view with Ctrl+Z.
[R3]ospf 10
[R3-ospf-10]import-route static
[R3-ospf-10]
<R3>system-view
Enter system view, return user view with Ctrl+Z.
[R3]no ip route-static 10.10.7.0 24 10.10.3.1
^
Error: Unrecognized command found at '^' position.
[R3]undo ip route-static 10.10.7.0 24 10.10.3.
[R3]undo ip route-static 10
<R3>
<R3>
Please check whether system data has been changed, and save data in
time
R4
Please check whether system data has been changed, and save data in
time
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R4
[R4]int serial 1/0/0
[R4-Serial1/0/0]ip add 10
^
Error: Wrong parameter found at '^' position.
[R4-Serial1/0/0]ip add 10.10.4.2 24
[R4-Serial1/0/0]
Oct 24 2017 22:38:53-08:00 R4 %%01IFNET/4/LINK_STATE(l)[0]:The line
protocol PPP
IPCP on the interface Serial1/0/0 has entered the UP state.
[R4-Serial1/0/0]quit
[R4]int giga 0/0/0
[R4-GigabitEthernet0/0/0]ip add 10.10.7.1 24
Oct 24 2017 22:39:27-08:00 R4 %%01IFNET/4/LINK_STATE(l)[1]:The line
protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R4-GigabitEthernet0/0/0]quit
[R4]
Please check whether system data has been changed, and save data in
time
<R4>system-view
Enter system view, return user view with Ctrl+Z.
[R4]ip route-static 0.0.0.0 0.0.0.0 10.10.4.1
[R4]ping 10.10.3.2
PING 10.10.3.2: 56 data bytes, press CTRL_C to break
Request time out
Request time out
Request time out
Request time out
Request time out
[R4]
Please check whether system data has been changed, and save data in
time
R5
The device is running!
########
<Huawei>
Please check whether system data has been changed, and save data in
time
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R5
[R5]int serial 1/0/0
[R5-Serial1/0/0]ip add 10
^
Error: Wrong parameter found at '^' position.
[R5-Serial1/0/0]ip add 10.10.5.2 24
[R5-Serial1/0/0]
Oct 24 2017 22:40:04-08:00 R5 %%01IFNET/4/LINK_STATE(l)[0]:The line
protocol PPP
IPCP on the interface Serial1/0/0 has entered the UP state.
[R5-Serial1/0/0]quit
[R5]int giga 0/0/0
[R5-GigabitEthernet0/0/0]ip add 10.10.8.1 24
Oct 24 2017 22:40:24-08:00 R5 %%01IFNET/4/LINK_STATE(l)[1]:The line
protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R5-GigabitEthernet0/0/0]quit
[R5]
Please check whether system data has been changed, and save data in
time
<R5>system-view
Enter system view, return user view with Ctrl+Z.
[R5]ip route-static 0.0.0.0 0.0.0.0 10.10.5.1
[R5]
Please check whether system data has been changed, and save data in
time
R7
The device is running!
################################################
<Huawei>
Oct 24 2017 22:26:18-08:00 Huawei %%01IFNET/4/BOARD_ENABLE(l)[0]:Board 1
has bee
n available.
<Huawei>
Oct 24 2017 22:26:18-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[1]:Interface
Serial1/
0/0 has been available.
<Huawei>
Oct 24 2017 22:26:18-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[2]:Interface
Serial1/
0/1 has been available.
<Huawei>
Oct 24 2017 22:26:20-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[3]:Interface
GigabitEt
hernet0/0/0 has turned into UP state.
<Huawei>
Oct 24 2017 22:26:20-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[4]:Interface
Serial1/0
/0 has turned into UP state.
<Huawei>
Oct 24 2017 22:26:23-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[5]:The line
protocol
PPP on the interface Serial1/0/0 has entered the UP state.
<Huawei>
Please check whether system data has been changed, and save data in
time
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R6
[R6]int serial 1/0/0
[R6-Serial1/0/0]ip add 10.10.6.2 24
[R6-Serial1/0/0]
Oct 24 2017 22:40:17-08:00 R6 %%01IFNET/4/LINK_STATE(l)[0]:The line
protocol PPP
IPCP on the interface Serial1/0/0 has entered the UP state.
[R6-Serial1/0/0]quit
[R6]int giga 0/0/0
[R6-GigabitEthernet0/0/0]ip add 10.10.9.1 24
[R6-GigabitEthernet0/0/0]
Oct 24 2017 22:40:37-08:00 R6 %%01IFNET/4/LINK_STATE(l)[1]:The line
protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R6-GigabitEthernet0/0/0]quit
[R6]
Please check whether system data has been changed, and save data in
time
<R6>system-view
Enter system view, return user view with Ctrl+Z.
[R6]ip route-static 0.0.0.0 0.0.0.0 10.10.6.1
[R6]
Please check whether system data has been changed, and save data in
time