Beruflich Dokumente
Kultur Dokumente
Session
Topics to be covered
No *
01 Rigid bodies and deformable solids forces on solids and supports equilibrium and
stability
02 strength and stiffness
03 Tension, compression and shear stresses Hookes law and simple
problems
04 Tension, compression and shear stresses Hookes law and simple
problems
05 Compound bars
06 Thermal stresses
07
Elastic constants and poissions ratio.
08
09
10
Tutorial
12
Session
Topics to be covered
No *
01 Beams support conditions types of Beams transverse loading on beams shear
02 force and bending moment in beams
06
07
Tutorial
08
09
ALAGAPPA COLLEGE OF TECHNOLOGY ANNA UNIVERSITY
Session
Topics to be covered
No *
01
Double integration method
02
03 Macaulays method
05
06
Tutorial
07
08
09
Session
Topics to be covered
No *
01 Theory of simple bending assumptions and derivation of bending equation (M/I =
02 F/Y =E/R), analysis of stresses in beams
05 flitched beams
07
08 Tutorial
09
ALAGAPPA COLLEGE OF TECHNOLOGY ANNA UNIVERSITY
Session
Topics to be covered
No *
01 Torsion of circular shafts derivation of torsion equation (T/J = fs/R = C/L) stress
and deformation in circular and hollow shafts stresses and deformation in circular and
02 hollow shafts
stepped shafts shafts fixed at both ends stresses in helical springs deflection of
03
springs spring constant.
Axially loaded short columns columns of unsymmetrical sections Eulers theory of
04
long columns
05 critical loads for prismatic columns with different end conditions effect of eccentricity
06
07
Tutorial
08
09
REFERENCES:
1. Rajput.R.K. Strength of Materials, S.Chand and Co, New Delhi, 2013
2. Bansal, R.K, Strength of Materials, Laxmi Publications(P) Ltd., Fourth Edition 2010
3. Rattan.S.S., "Strength of Materials", Tata McGraw Hill Education Pvt. Ltd., New Delhi, 2011.