Beruflich Dokumente
Kultur Dokumente
Spare Parts List The spare parts list (edition 8/2008, edition date 08.11.02) is
valid with immediate effect. All previous spare parts lists are
invalid.
Refurbished Spare Parts Conditions of Delivery for Refurbished Spare Parts (depending
on availability):
Defective spare parts must be sent back with the
accompanying documents (Material Return Form) to B. Braun
Avitum AG via the representative of the respective country for
the ability to supply refurbished spare parts. The condition and
the version of the defective spare parts must allow a qualified
refurbishment.
Backward Compatibility New spare parts always have article numbers with numeric
of Spare Parts characters and are backward compatible unless otherwise
specified in the spare parts list. If a spare part is modified the last
digit of the article number changes to an alphabetic character
with the initial index A. These spare parts are in principle
backward compatible to the previous article number (numeric or
alphanumeric - with or without an index). See table with an
example for the switch mode power supply SMPS.
B. Braun Avitum AG Technical Hotline (Germany): Tel. No.: +49 5661 71 3796
Schwarzenberger Weg 73 - 79 Technical Support (Germany): Tel. No.: +49 5661 71 3500
34212 Melsungen Spare Parts (Germany): Tel. No.: +49 5661 71 3662
Germany E-Mail: dialysetechnik.melsungen@bbraun.com
B. Braun Avitum AG Reason for returning the part (please tick !):
Wareneingang - Service Warranty return (replacement to be ordered separately) ---------------- "
Defective part for refurbishment -------------------------------------- "
Schwarzenberger Weg 73-79 Wrong shipment ----------------------------------------------------- "
Complaint sample (use complaint form for details) --------------------- "
D-34212 Melsungen Part returned for investigation ---------------------------------------- "
Germany Part returned for disposal by the manufacturer ------------------------- "
..........................................................................................................................................................................................................................................................
..........................................................................................................................................................................................................................................................
From machine type: .................................................. Serial number: ................................................. Working hours: .......................................
..........................................................................................................................................................................................................................................................
..........................................................................................................................................................................................................................................................
The described defect appears: Intermittently " Permanently " (please tick !)
Cleaned/disinfected: cleaned " yes disinfected " yes (please tick !)
Disinfectant: ......................................................................................................................................................................
This form must be attached to every spare part sent back to your B. Braun representative!
Spare parts without this form are scraped.
Please Copy!
Commissioning and Service Only trained personnel must commission and service the Dialog.
Servicing must only be performed with proper tools, calibration equipment and be in accordance with
the most recent revision of this service manual/technical information, which must be clearly and
thoroughly understood.
Prevent Electrical Shock Hazard Switch off the Dialog and disconnect unit from mains if you have to open the machine for servicing.
Do not touch any exposed wiring or conductive surfaces while the Dialog is opened. The voltages
present when electrical power is connected to the Dialog can cause serious injury or death.
High Voltage Battery Option If a battery option is present in the machine: high voltage can be present in the basic housing and
!
monitor due to the battery (if monitor booster is defective), even if the machine has been
disconnected from mains. Pull out the battery compartment in the base platform and switch off the
battery voltage before opening the machine.
Prevent Shorts during Exchange of Boards/Valves/Pumps (+24 VL) Mains Power Supply (Ascom/Delta)
Prevent shorts during the exchange of boards, valves and pumps: remove the fuse SI 14 6.3 AT (+24
VL) from the mains power supply (Ascom/Delta), because the +24 VL reduction is very slow.
Connection and Operation Service Board The service board must only be operated in the TSM service program. If the service board is connected
to the Dialog it is prohibited to connect a patient to the Dialog and to run a therapy.
Prevent Chemical Burns and Scalding During servicing on running machines: prevent chemical burns and scalding of the skin due to the
penetration of disinfectant or hot liquid.
Contaminated Machines Protective gear should be worn in case of servicing of assumed contaminated machines.
Cover in Rear Door Servicing of mechanical assembly groups (components in contact with fluid): the black cover in the
rear door must be assembled during servicing because it serves as a spray protection for the assembled
printed circuit boards.
Tubing Tubing must be replaced only by the same tubing type/length and identical installation manner.
Make sure that the tubings in the machine are not kinked or twisted after servicing (e.g. if sub-racks
are pulled out and inserted again). The tubing must not touch moving/rotating components (e.g.
motors of gear pumps).
Page
7.10 Top Level Sub-Rack 7-34
7.10.1 Motherboard POS-460 7-34
7.10.2 Motherboard GX1LCD 7-35
7.11 Rear Door 7-36
7.11.1 Compatibility Table for Boards 7-38
7.11.2 Mains Power Supply (Ascom/Delta) Dialog 7-39
7.11.3 Switch Mode Power Supply SMPS (Benning) Dialog Advanced 7-40
7.11.3.1 Compatibility Table SMPS (Benning) 7-40
7.12 Front Door Dialog 7-42
7.13 Front Door Dialog Advanced 7-44
7.14 Basic Housing Dialog 7-46
7.14.1 Concentrate Suction Rods Dialog 7-47
7.14.2 Rinsing Chambers for Concentrate Suction Rods Dialog 7-48
7.14.3 Rinsing Bridge 1 Dialog 7-49
7.15 Basic Housing Dialog Advanced 7-53
7.15.1 Concentrate Suction Rods Dialog Advanced 7-54
7.15.2 Rinsing Chambers for Concentrate Suction Rods Dialog Advanced 7-55
7.15.3 Rinsing Bridge 2 Dialog Advanced 7-56
7.16 Colour Monitor 7-59
7.17 Test and Calibration Equipment and Tools 7-61
7.18 Service Kits 7-64
Page
7.19 Software 7-66
7.19.1 Compatibility Table Software 7-67
7.19.2 Compatibility Table Software Patches/BIOS Update 7-67
7.20 Miscellaneous 7-68
7.21 HDF Bag (Substitution Option) 7-70
7.22 HDF Bag (Option) 7-71
7.22.1 Flow Detector 7-72
7.22.2 UF Piston Pump 7-73
7.22.3 HFS Board 7-73
7.23 Staff Call (Option) 7-74
7.24 Single Needle Valve (Option) 7-75
7.25 Bicarbonate Cartridge Holder (Option) 7-76
7.25.1 BIC Cartridge Holder 7-76
7.25.2 Air Separator LAB1, Throttle DBK and Valve VBKO/VBKS 7-77
7.25.3 Air Separator LAB2/Valve VBICP and Valve VVB 7-78
7.25.4 BIC Cartridge Holder Boards 7-78
7.26 Bicarbonate Cartridge Holder with Valve (Option) 7-79
7.26.1 BIC Cartridge Holder with Valve 7-79
7.26.2 Air Separator LAB2/Valve VBICP and Valve VVB 7-80
7.26.3 Air Separator LAB1, Throttle DBK and Valve VBKO/VBKS 7-81
7.26.4 BIC Cartridge Holder Boards 7-82
Page
7.27 HDF Online (Option) 7-83
7.27.1 Substitution Port 7-84
7.27.2 UF Sub-Rack HDF Online 7-85
7.27.3 Valve Block HDF Online 7-86
7.27.4 HDF Online Boards 7-87
7.27.5 DF/HDF Filter Holder HDF Online 7-88
7.28 Automatic Blood Pressure Measurement ABPM (Option) 7-90
7.28.1 Automatic Blood Pressure Measurement ABPM Module M2000 7-90
7.28.1.1 Compatibility Table ABPM Modules/Interface Boards 7-91
7.28.2 Automatic Blood Pressure Measurement ABPM Module M2005 7-92
7.28.2.1 Compatibility Table ABPM Module M2005 7-93
7.29 Battery (Option) 7-94
7.29.1 Battery Sub-Rack 7-95
7.29.2 Charge LED 7-96
7.30 Nexadia-BSL/WAN-BSL (Option) 7-97
7.31 Spare Parts List Alphabetical Order 7-98
7.32 Changes/Modifications in Spare Parts List 7-117
A
Notes for Solenoid Valve 34517979
Self-Locking Nut A
Do not readjust the self-locking nut A,
A
1 B C i 1
ii
iii
i 1 x Screw M4
ii 2 x Spring Washer 4.2
iii 1 x Washer 4.2
Notes for Solenoid Valve 3451902B
iv 1 x Screw 40x10
Self-Locking Nut A
Do not readjust the self-locking nut A, v 1 x Washer 4.2
because the nut is assembled with a iv
2
defined torque (1.3 Nm ± 10 %).
9 34560246 1 Float ball incl. o-ring the o-ring B must be assembled additionally
during the assembly of the float ball A
(see figure)
7,
8, 8
9
9
A
13 34560246 1 Float ball incl. o-ring the o-ring B must be assembled additionally
during the assembly of the float ball A
(see figure)
11,
12, 12
13
13
A
RVK
RVB
FPE EP
18
BA-TE08C M.KAY DialogAd_sm_Chapter 7_8-2008.doc/pdf <081102> yymmdd B. Braun Avitum AG
RVK
RVB 19
RVB 2
BICLF ENDLF RVE PE EK
20
21
22
FPE EP
2,1 3 5 6 15,14,13
BA-TE08C M.KAY DialogAd_sm_Chapter 7_8-2008.doc/pdf <081102> yymmdd B. Braun Avitum AG
Dialog/Dialog Advanced 7. Spare Parts List 8/2008 7-21
Pos. Art. No. Qty. Description Comments
TSD
TSD-S
RVFPE
2
B
3 4 3
BK1 VABK1
VBP
5 5
VDABK1
MSBK1
VABK2 VLA
6 8
VDABK2
LAFS 3 3 3
MSBK2
FBK2
C B
BK2 FPA LA
RV
C
RV
B UFP 7 7
UFP RVFPA
RVFPE
RVB RVK
FPE EP
16,17,18 15
12 34773762 10 O-ring 9.25 x 1.78
13 34515330 1 Gear pump (Micropump version 1) with
magnet, without motor
16 14 3451663A
15 34771140
1 Motor
20 O-ring 3.1 x 1.6
16 3451614B 1 Temperature sensor without connector
18
BA-TE08C M.KAY DialogAd_sm_Chapter 7_8-2008.doc/pdf <081102> yymmdd B. Braun Avitum AG
Dialog/Dialog Advanced 7. Spare Parts List 8/2008 7-25
Pos. Art. No. Qty. Description Comments
RVK
RVB
RVB
BICLF ENDLF RVE PE EK 19
2
20
21
FPE EP
22
2,1 3 5 6 15,14,13
BA-TE08C M.KAY DialogAd_sm_Chapter 7_8-2008.doc/pdf <081102> yymmdd B. Braun Avitum AG
TSD
TSD-S
RVFPE
2
B
3 4 3
BK1 VABK1
VBP
5 5
VDABK1
MSBK1
VABK2 VLA
6 8
VDABK2
LAFS 3 3 3
MSBK2
FBK2
C B
BK2 FPA LA
RV
C
RV
B UFP 7 7
UFP RVFPA
DDE
LA
VLA
VABK2 VDABK1 VBP
VEBK2
V FPE Z DDE
VDABK2 VABK1
RVFPA
FPA
10
2 34517987 1 Distance piece with 2 x O-ring 11.1 necessary for the assembly of the
VDABK2 VABK1
4 3451906C 1 Solenoid valve 2/2 way manuf. AKM only, coil straight,
connector/connector
1,2 5 - 1 Balance chamber 2 see separate figure
DDE 3
LA
VBP
VEBK2 VLA
VABK2 VDABK1
4
RVFPA
VDEBK1
5 MSBK2 FPA
MSBK1
VDEBK2
VEBK1
4
VABK1
DDE
RVFPA
FPA
10
VEBK2 3 4 34519092
4 34770976
1 Coil
10 O-ring 15.6 x 1.78
VDEBK1
5 3451906C 1 Solenoid valve 2/2 way manuf. AKM only, coil straight,
connector/connector
VDEBK2
6 6
VEBK1
VABK1
5
1,2
VGA
Cable
HDD
4
5
4 3 Red dot conductor 1
Roter Farbpunkt Ader 1
Supervisor Boards SB
Controller Board CB
7 6 3451499B 1 Supervisor board version 3 for mains power supply (Ascom/Delta)
Controller Boards CB
7 3451627E 1 Controller board 1 MB
7 3451921B 1 Controller board 2 MB for SW ≥ 4.00
Rear Door
9a - 1 Tubing holder/fan cover replaced by 3451441A
10a 34518355 1 Crank for blood pump compatible to tubing holder 9a/9b
9a
10a
10b
9b
discontinued
K4 K3 F304
P4 F5/F6 34570187 10 Fuse M20 A (6.3 x 32 mm) for 110/120 V
F602
F601
F301 34570160 10 Fuse T3.15 A (TR5)
P5
F302 34570470 10 Fuse T5 A (TR5)
P13 P3
- F303 34570160 10 Fuse T3.15 A (TR5)
+ F304 34570160 10 Fuse T3.15 A (TR5)
P9
Type
SN
C115 F401 34570160 10 Fuse T3.15 A (TR5)
TN/PN XXXXXX 11 P7
Opt.
C114 F402 34570470 10 Fuse T5 A (TR5)
Art/Kind
Hz P8 P2
V F403 34518819 10 Fuse T1.25 A (TR5)
A H104
X100 P101
F600 34570179 10 Fuse M10 A (6.3 x 32 mm)
F601 34570160 10 Fuse T3.15 A (TR5)
F602 34570160 10 Fuse T3.15 A (TR5)
K3/K4 34514775 2 Relay (12 V) for 24 V
P13 P3
-
+
P9
Type
SN
C115
TN/PN XXXXXX 11 P7
Opt.
Art/Kind
C114
Hz P8 P2
V
A H104
X100 P101
4 34516409 1 Filter
5 3451711F 1 Blood pump without roller
5 719262F 1 Blood pump without roller refurbished part
19
8 34519823 2 Hinge pin with interior thread for cover without thread
22 13 34570616 5 Latch
21 HP
20
TP4
V1
SAKA SAKV
HP
20
21
22
4 34516409 1 Filter
5 3451711F 1 Blood pump without roller
SN SN 5 719262F 1 Blood pump without roller refurbished part
BPA BPV
6 34516689 1 Roller 8x12 for blood pump
21 7 3451669E 1 Cover for blood pump cover without thread (see separate figure), for
hinge pin with interior thread
7 3451981E 1 Cover for blood pump cover without thread (see separate figure), incl.
20 hinge pin with interior thread
(upgrade kit)
16 8 34519823 2 Hinge pin with interior thread for cover without thread
10ml
20ml
HP 13 34570616 5 Latch
7
11
8
12
9
BA-TE08C M.KAY DialogAd_sm_Chapter 7_8-2008.doc/pdf <081102> yymmdd B. Braun Avitum AG
Dialog/Dialog Advanced 7. Spare Parts List 8/2008 7-47
Pos. Art. No. Qty. Description Comments
1 2 39972011
3 34517782
m Silicone tubing 3.3 x 2.85
5 Disposable filter
per meter (transparent)
7 10 34570004
11 39971414
5 O-ring 9.3 x 2.4
m Silicone tubing 3.2 x 1.6 per meter
8 12 3451728A 1 PE tube 4 x 1 with silicone tubing
9
10
11
12
BA-TE08C M.KAY DialogAd_sm_Chapter 7_8-2008.doc/pdf <081102> yymmdd B. Braun Avitum AG
3 Dialysate
34565140 50m PVC tubing 10 x 3, red 50 meter (for water
inlet)
Dialysat
Water
Wasser - 34515151 m PVC tubing 10 x 3, black per meter (for dialysate
outlet)
4,5,6
34565159 50m PVC tubing 10 x 3, black 50 meter (for dialysate
5,6,7 outlet)
10 34517294 1 Suction set with tubing, suction port and black lid for disinfection
Red 10 34514562 1 Suction set with tubing, suction port and yellow lid for disinfection
13,12,11 10,9,8 14
BA-TE08C M.KAY DialogAd_sm_Chapter 7_8-2008.doc/pdf <081102> yymmdd B. Braun Avitum AG
12 3 4
1,2 2,9 10,11 12,13,14,15 7 34570457 10 O-ring 5.0 x 1.6 for eccecntric shaft
12 3451894C 1 Blood leak detector 3 complete with Adapter for rinsing bridge 1,
SW ≥ 3.46
12 3451908C 1 Blood leak detector 3 replaces version 2, only if BLD with adapter is
already present
13 34770976 10 O-ring 15.6 x 1.78
14 34770950 20 O-ring 8.0 x 1.6
20 for cover screw blood leak detector
15 3477106A 5 O-ring 6.4 x 1.3
19 18,17,16 16 34511792 1 Tubing coupling
17 34517138 1 Reed sensor with contacts and o-ring 3.68 x 1.78
18 34771255 20 O-ring 14 x 1.5
19 34516506 1 Rinsing bridge 1 without blood leak detector, pressure sensor, solenoid
valve, servomotor, fork light barrier and seal cord
20 34773762 10 O-ring 9.25 x 1.78
23 34517294 1 Suction tubing, suction port and lid (black) for disinfection
VDE
VDA
BL
PDA
VD
23,22,21 20 19
2 5 39972305
6 34514597
m Silicone tubing 5 x 1.5, red
1 Suction coupling
per meter
5 8 34519939
9 34514767
1 Suction rod complete, blue
1 Male connector (red) with o-rings
6 9 34519920 1 Suction rod complete, red
7 10 34570004 5 O-ring 9.3 x 2.4
10
11
12
BA-TE08C M.KAY DialogAd_sm_Chapter 7_8-2008.doc/pdf <081102> yymmdd B. Braun Avitum AG
Dialog/Dialog Advanced 7. Spare Parts List 8/2008 7-55
Pos. Art. No. Qty. Description Comments
10 34517294 1 Suction set with tubing, suction port and black lid for disinfection
10 34514562 1 Suction set with tubing, suction port and yellow lid for disinfection
Red
10 8903409 m PVC tubing 3.5 x 1 for disinfection, per meter
6 10 34512675 1 Suction port for suction tubing
13,12,11 10,9,8 14
BA-TE08C M.KAY DialogAd_sm_Chapter 7_8-2008.doc/pdf <081102> yymmdd B. Braun Avitum AG
Dialog/Dialog Advanced 7. Spare Parts List 8/2008 7-57
Pos. Art. No. Qty. Description Comments
12 3 4
VDE 15 34517138 1 Reed sensor with contacts and o-ring 3.68 x 1.78
16 34771255 20 O-ring 14 x 1.5
17 34773762 10 O-ring 9.25 x 1.78
VD
PDA
BL
13 12
4 34518568 1 Keyboard
- 34519360 1 Repair kit monitor cable for monitor type
14HC4AA4 consisting of:
1 x VGA cable
1 x Ribbon cable
- 34514090 1 Repair kit monitor cable for monitor type
14HC4AA5 consisting of:
1 x VGA cable
1 x Ribbon cable
- 34514023 1 Repair kit monitor cable for monitor type
14HC4AA7 consisting of:
1 x VGA cable
1 x Ribbon cable
Colour Monitor
5 34517847 1 Glass touch screen
6 34518720 1 Keyboard membrane for SW ≥ 3.46
5 6
+
START
STOP
- 7702655 1 Service board SMPS for switch mode power supply SMPS
for watchdog generation and voltage
check of power supply
Service Kits
- 34518681 1 Retrofit kit HDF (SLB/ADB)
- 34518606 1 Retrofit kit fuse holder board 230/240 V
- 34518622 1 Retrofit kit fuse holder board 110/120 V
- 34519505 1 Retrofit kit SAKV currentless closed
- 3451948B 1 Hardware kit for ≥ SW 5.00
- 34514694 1 Retrofit kit POS-460 – GX1LCD SW update required:
• from 3.46 to 3.48
including:
• from 5.35 to 5.36
• Sub-rack
• GX1LCD motherboard
• Adapter RS-232 (for COM3)
• SC board adapter loudspeaker/GX1LCD
• Cable harness for voltage supply
• Assembly material
7.19 Software
- 77051A 1 Software 3.46 see compatibility table
- 770621 1 Software 6.21 incl. diskette with PDF file for see compatibility table
cover page of operating manual SW 6.21
- 7703511 1 Software 6.58 incl. diskette with PDF file for see compatibility table
cover page of operating manual SW 6.58
- 770721 1 Two diskettes treatment language version see compatibility table
044.07.05 (English)/049.07.05 (German) for
SW 6.58
- 7703686 1 Software 6.59 see compatibility table
7.20 Miscellaneous
- 37840053 m Tubing 12 x 2 (RAL 9001) per meter
AxB -
-
39971414
39972445
m
m
Silicone tubing 3.2 x 1.6
Silicone tubing 2 x 3, transparent
per meter
per meter
per meter
39971210 m Silicone tubing 2 x 1.5
A x B Tubing -
- 34515143 m PVC tubing 10 x 3, red per meter
Miscellaneous
- 39508013 1 Threaded insert M4 a drill ∅ 5.7 mm is required for the threaded insert M4
Note: Do not exceed max. drilling depth 11 mm +0.1
(see left figure)
60 o - 7702809
1 34570322
1 Terminal grease 50 ml
10 Grounding for sub-racks d consisting of:
screw a, terminal b, tooth lock washer c,
pay attention to correct
assembly sequence!
1 - 7703708
washer e, spring washer f, nut g
1 Grease SKD 4002 100 g tube
(to lubricate the needle bearing of the roller)
a
c bd
ef
g
3 6
7
8
BA-TE08C M.KAY DialogAd_sm_Chapter 7_8-2008.doc/pdf <081102> yymmdd B. Braun Avitum AG
6 6
2 8
3
7
5
Power Power
Board 2 Board 1
Supervisor Board
HFS
Board 2
STAT (Default)
DYN
DYNAUS
Power Power
Board 2 Board 1
Supervisor Board
SAKA
Board 1
Controller Board
5 3451964A 1 Reed sensor with cable harness and tubing for top BIC cartridge
holder only
(tubing 12 x 2, silicone tubing 3.3 x 2.85)
5a 34517138 1 Reed sensor with contacts and o-ring 3.68 x 1.78
6 34517901 1 Pressure spring
7 34570250 5 O-ring 15.54 x 2.62
8 34517928 1 Connector piece complete with piercing
spike
9 34519750 1 Housing, bottom
- 34517782 5 Disposable filter filter FBIC
9 8 4 7 5
a
BA-TE08C M.KAY DialogAd_sm_Chapter 7_8-2008.doc/pdf <081102> yymmdd B. Braun Avitum AG
Dialog/Dialog Advanced 7. Spare Parts List 8/2008 7-77
Pos. Art. No. Qty. Description Comments
BIC-KV
1
Power Board Power
Board 2 Board 1
Supervisor Board
HFS
Board 2
ENDLF VBICP
BICP
RVFPE
RVE
FPE
PE KP
EP
EK
UFP
4 34770925 5 Plug
5 34770852 5 O-ring 11.1 x 1.6
1,2 2,3 4 6 34771093 10 Pressure spring 100 mmHg
5 7 34771352 3 Centre disc
8 3451902B 1 Solenoid valve 2/2 way coil straight, connector/flange (AKM)
7 8 4
DBK
2,3
VBKS VBKO
DBK
VBKS
1,2
LAB1
1
BIC-KV
Board
Power Power
Board 2 Board 1
Supervisor Board
HFS
Board 2
BPA BPV
SAD
RDV 1
SAKV SAKA
V A
HP
4,5
A or A+B (A=Quadring; B=Spacer)
A A
B B
VBP
HFB VSB
DDE
VBE
4 LA
VDFF
VLA
VABK2 VDABK1
1,
3 RVFPA
VDA 2
VEBK2 3
VDEBK1
MSBK2 FPA
MSBK1
VDEBK2 VSAA
VEBK1 VSAE
VABK1
3
1,2
BA-TE08C M.KAY DialogAd_sm_Chapter 7_8-2008.doc/pdf <081102> yymmdd B. Braun Avitum AG
HFB
2
VBE
VSB
3
VBP
1 HOP BIC-KV
Board Board
Power Power
2 Board 2 Board 1
Supervisor Board
3 HOA
Board
Controller Board
2 2 3
BA-TE08C M.KAY DialogAd_sm_Chapter 7_8-2008.doc/pdf <081102> yymmdd B. Braun Avitum AG
Dialog/Dialog Advanced 7. Spare Parts List 8/2008 7-89
Pos. Art. No. Qty. Description Comments
3 Red/Rot
Blue/Blau
2
3 Red/Rot
Blue/Blau
Interface Board
ABPM Module Motherboard
M1050 M2000 POS-460 GX1LCD
34518525 (ABPM interface board M1050) X - X -
34514147 (ABPM interface board M2000)
- X *X *X
*X The factory setting of the interface board is
for GX1LCD motherboard.
ABPM Interface
Board M2000
R2
R3
R4
R5
R6
R7
P1 P2 Version CX.X
1 ON
1
1 2 3 4 5 6
P2 1
ON
2 3 4 5 6
P1 OFF
DIL OFF
OFF
DIL Switch
1 2 3 4 5 6
OFF
OFF
OFF
GX1LCD
ON
ON
ON
(default)
OFF
OFF
OFF
ON
ON
ON
POS-460
SMPS
(P3)
brown/braun
- 7702809 1 Terminal grease 50 ml
SMPS
P3
blue/blau
green/yellow
grün/gelb
blue/blau blue/blau
green/yellow brown
grün/gelb braun
brown brown
braun braun
1
BA-TE08C M.KAY DialogAd_sm_Chapter 7_8-2008.doc/pdf <081102> yymmdd B. Braun Avitum AG
1
rubber adhesive RTV 118
PBS/SN
+ -
PBE 1
blue/blau -
red/rot
+
BPV
Please note that the alphabetic spare parts have been listed using a
nomenclature hierarchy structure, because the common approach for
searching a specific spare part would be in a structured way.
Controller board 2 MB
3451921B 1 Board, controller, 2 MB
Search for the keyword board and look for controller to find the
required spare part number.
Solenoid valve
Search for the keyword valve and look for solenoid to find the required 3451902B 1 Solenoid valve 2/2 way
spare part number. 3451906C 1 Solenoid valve 2/2 way
3451716A 1 Pole, IV
3451962A 1 Pole, infusion, version 2
3451448A 1 Port, substitution, complete
34512675 1 Port, suction
34517090 1 Potentiometer
7701543 1 Potentiometer template 20 ml
7701551 1 Potentiometer template 50 ml
719260A 1 Power supply, mains, (110/120 V~)
3451758A 1 Power supply, mains, (110/120 V~)
719259B 1 Power supply, mains, (230/240 V~)
719284D 1 Power supply, switch mode, SMPS
719287B 1 Power supply, switch mode, SMPS version 12
3451474B 1 Power supply, switch mode, SMPS version 12
34519564 1 Profile, silicone
719262F 1 Pump, blood, without roller
3451711F 1 Pump, blood, without roller
34515330 1 Pump, gear, with magnet, without motor (Micropump version1)
3451632B 1 Pump, heparin, Comfort complete
3451432B 1 Pump, heparin, Compact
3451749E 1 Pump, piston
3451789D 1 Pump, piston, (HDF bag option)
34514953 1 Reducer
34560262 2 Relay (12 V – Ascom/Delta)
All changes and modifications are listed since the last edition of this
spare parts list (from edition 7-2007/edition date 06.10.12 to edition 8-
2008/edition date 08.11.02).
7-32 4 34771000 O-ring 5.0 x 1.5 34570683 O-ring 4.47 x 1.78 new art. no.
7-32 8 34515330 Gear pump (Micropump) with - Gear pump (Micropump version 1) modified purchase text
magnet, without motor with magnet, without motor
7-32 10 34560181 Housing with lid (air separator) 3456018A Housing with lid (air separator) new art. no.
7-33 5 3451906B Solenoid valve 2/2 way 3451906C Solenoid valve 2/2 way new art. no.
7-33 6 34516654 Membrane position sensor board 3451665A Membrane position sensor board new art. no./modified purchase text
7-34 2 - - 3451404A Motherboard GX1LCD new art. no.
7-34 3 34514589 Hard disk drive 40 GB 3451458A Hard disk drive 40 GB new art. no.
7-34 2 - - 34514791 SODIM module 64 MB new art. no.
7-35 3 34514589 Hard disk drive 40 GB 3451458A Hard disk drive 40 GB new art. no.
7-36 - 34519726 Internal cover rear door 34560424 Internal cover rear door new art. no.
7-38 - - - - - Updated compatibility table
7-39 1 3451629B Mains power supply (230/240 V~) - - discontinued
7-39 K5/K6 34560262 Relay (24 V) - Relay (12 V) modified purchase text
7-40 1 34514740 Switch mode power supply SMPS 3451474B Switch mode power supply SMPS new art. no./modified purchase text (SMPS
version 12 Version 12)
7-40 1 7192878 Switch mode power supply SMPS 719287B Switch mode power supply SMPS new art. no./modified purchase text (SMPS
Version 12)
7-40 F600 34570179 Fuse M10 A (TR5) - Fuse M10 A (6.3 x 32 mm) modified purchase text
7-40 K3/K4 34514775 Relay (24 V) - Relay (12 V) modified purchase text
7-40 H104 34503447 Buzzer 34560580 Buzzer new art. no.
7-41 - - - 3451474B Switch mode power supply SMPS new art. no. (SMPS Version 12)
7-41 - - - 719287B Switch mode power supply SMPS new art. no. (SMPS Version 12)
7-42 6 7192630 Roller 8x12 for blood pump - - discontinued
7-42 12 3451945B Single needle board 34560076 Single needle board new art. no.
7-43 16 34518517 Coupling - Coupling (ABPM) modified purchase text
7-43 20 3451632A Heparin pump Comfort complete 3451632B Heparin pump Comfort complete new art. no.
7-43 23 34518924 Rotary magnet complete 3456000A Rotary magnet complete new art. no.
7-43 24 3456005B SAD version 3 with red detector 3456005C SAD version 3 with red detector new art. no.
7-44 6 7192630 Roller 8x12 for blood pump - - discontinued
7-44 12 3451945B Single needle board 34560076 Single needle board new art. no.
7-45 17 3451432A Heparin pump Compact 3451432B Heparin pump Compact new art. no.
7-45 17b - - 34570640 Dummy plug new art. no.
7-45 17c - - 34570667 Clamp new art. no.
7-45 17d - - 34570659 Unlocking lever set new art. no.
7-45 18 34518924 Rotary magnet complete 3456000A Rotary magnet complete new art. no.
7-45 19 3456005B SAD version 3 with red detector 3456005C SAD version 3 with red detector new art. no.
7-46 1 34519629 Infusion pole 3451962A Infusion pole version 2 new art. no./modified purchase text
7-46 5 34511628 Mains cord, without connector - Mains cord, without connector modified purchase text
230/240 V
7-47 6 34516557 Suction coupling 34514597 Suction coupling new art. no.
7-47 7 34514660 Suction nipple with o-rings 9.3 x 34514651 Suction nipple with o-rings 9.3 x new art. no.
2.4 2.4
7-48 2 34519289 Connection nipple 34514678 Connection nipple new art. no.
7-48 2 34514031 Valve with seal - - discontinued
7-48 3 34516557 Suction coupling 34514597 Suction coupling new art. no.
7-48 - - - 34565140 PVC tubing 10 x 3, red new art. no. (50 m)
7-62 - 7702841 DCI cable, external 770284A DCI cable, external new art. no.
7-62 - 7701993 Swab - - discontinued
7-62 - 7702035 Stopcock system with five 770203A Stopcock system with five new art. no./modified purchase text
stopcocks stopcocks, incl. lines
7-62 - - - 7703848 Assembly jig (motor piston pump) new art. no.
7-63 - 7703643 Chip card - Chip card for BSL-Nexadia modified purchase text
7-64 - 3451756A Upgrade kit raised platform - - discontinued
7-64 - 34518991 Upgrade kit high temperature - - discontinued
tubing
7-65 - 34519831 Retrofit kit SAKA - - discontinued
7-65 - 34518665 Modification set BIC cartridge - - discontinued
holder
7-65 - 710740A Hardware kit for SW 3.10 - - discontinued
7-65 - 34518649 Hardware kit for SW 3.40/3.46 - - discontinued
7-66 - 770511 Software 3.46 77051A Software 3.46 new art. no.
7-66 - 77003686 Software 6.59 7703686 Software 6.59 corrected art. no.
7-68 - - - 39972445 Silicone tubing 2 x 3, transparent new art. no. (for BIC cartridge holder)
7-68 - - - 34773770 Y-Tubing connector 6 mm new art. no.
7-68 - - - 39237648 Y-Tubing connector 8 mm new art. no.
7-68 - - - 34565140 PVC tubing 10 x 3, red new art. no. (50 m)
7-68 - - - 34565159 PVC tubing 10 x 3, black new art. no. (50 m)
7-69 - - - 7703708 Grease SKD 4002 new art. no.
7-70 1 34517405 Load cell 3451740A Load cell new art. no.