Beruflich Dokumente
Kultur Dokumente
Technical features
Medium: Flow: Fluid temperature:
Materials:
Hydraulic and pneumatic 0,8 Cv (11,5 Kv) ... 6,0 Cv (86,2 Kv) -20 ... +90C (-4 ... +194F)
Valve body, trim, coil housing and
customer to specify and confirm Port size: Options to -60C (-76F)
top cover:
compatibility 1/4 NPT, 1/2 NPT, G1/4, G1/2 available on request
stainless steel 1.4404 (316 L)
Operation: or manifold version Ambient temperature:
O-rings seats & seals: high NBR
Direct solenoid operated Operating pressure: See table on page 2
poppet valves 0 ... 20 bar (0 ... 290 psi) Air supply must be dry enough
Other seal materials available on
Mounting position: 0 ... 50 bar (0 ... 725 psi) to avoid ice formation at
request
Solenoid vertical 0 ... 207 bar (0 ... 3002 psi) temperatures below 2C (+35F).
0 ... 414 bar (0 ... 6005 psi)
11/12 Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
N/en/en 5.7.550.01
ICO4S
1 2
1/4 NPT 2/2 NC 0 ... 20 NBR PBMR* Exd IIC T6 4,5 T6 (-60 +48C), T4 (-60 ... +90C ) 5,5 6 Y121PA1H1*S
2
G 1/4 2/2 NC 0 ... 20 NBR PBMR* Exd IIC T6 4,5 T6 (-60 +48C), T4 (-60 ... +90C ) 5,5 6 Y121PE1H1*S
1/2 NPT 2/2 NC 0 ... 20 NBR PBMR* Exd IIC T6 4,5 T6 (-60 +48C), T4 (-60 ... +90C ) 7,5 7 Y121PA3H1*S
1
G 1/2 2/2 NC 0 ... 20 NBR PBMR* Exd IIC T6 4,5 T6 (-60 +48C), T4 (-60 ... +90C ) 7,5 7 Y121PE3H1*S
1/4 NPT 3/2 UNI 0 ... 20 NBR Without Exd IIC T6 4,5 T6 (-60 +48C), T4 (-60 ... +90C ) 5,5 8 Y123AA1H1*S
G 1/4 3/2 UNI 0 ... 20 NBR Without Exd IIC T6 4,5 T6 (-60 +48C), T4 (-60 ... +90C ) 5,5 8 Y123AE1H1*S
2
1/2 NPT 3/2 UNI 0 ... 20 NBR Without Exd IIC T6 9,6 T6 (-60 +48C), T4 (-60 ... +90C ) 7,5 9 Y123AA3H1*S
G 1/2 3/2 UNI 0 ... 20 NBR Without Exd IIC T6 9,6 T6 (-60 +48C), T4 (-60 ... +90C ) 7,5 9 Y123AE3H1*S
1 3
3/4 NPT 3/2 UNI 0 ... 20 NBR Without Exd IIC T6 15,1 T6 (-60 +48C), T4 (-60 ... +90C ) 10 10 Y113AA5H1*S
G 3/4 3/2 UNI 0 ... 20 NBR Without Exd IIC T6 15,1 T6 (-60 +48C), T4 (-60 ... +90C ) 10 10 Y113AE5H1*S
1/4 NPT 3/2 UNI 0 ... 20 NBR PBMR* Exd IIC T6 4,5 T6 (-60 +48C), T4 (-60 ... +90C ) 5,5 11 Y123PA1H1*S
2
G 1/4 3/2 UNI 0 ... 20 NBR PBMR* Exd IIC T6 4,5 T6 (-60 +48C), T4 (-60 ... +90C ) 5,5 11 Y123PE1H1*S
1/2 NPT 3/2 UNI 0 ... 20 NBR PBMR* Exd IIC T6 6,0 T6 (-60 +48C), T4 (-60 ... +90C ) 7,5 12 Y123PA3H1*S
1 3
G 1/2 3/2 UNI 0 ... 20 NBR PBMR* Exd IIC T6 6,0 T6 (-60 +48C), T4 (-60 ... +90C ) 7,5 12 Y123PE3H1*S
1/4 NPT 3/2 UNI 0 ... 20 NBR A-L-L* Exd IIC T6 4,5 T6 (-60 +48C), T4 (-60 ... +90C ) 5,5 13 Y123BA1H1*S
2
G 1/4 3/2 UNI 0 ... 20 NBR A-L-L* Exd IIC T6 4,5 T6 (-60 +48C), T4 (-60 ... +90C ) 5,5 13 Y123BE1H1*S
1/2 NPT 3/2 UNI 0 ... 20 NBR A-L-L* Exd IIC T6 15,1 T6 (-60 +48C), T4 (-60 ... +90C ) 7,5 14 Y123BA3H1*S
1 3
G 1/2 3/2 UNI 0 ... 20 NBR A-L-L* Exd IIC T6 15,1 T6 (-60 +48C), T4 (-60 ... +90C ) 7,5 14 Y123BE3H1*S
2 1/4 NPT 3/2 UNI 0 ... 20 NBR JSMO* Exd IIC T6 4,5 T6 (-60 +48C), T4 (-60 ... +90C ) 5,5 15 Y123SA1H1*S
G 1/4 3/2 UNI 0 ... 20 NBR JSMO* Exd IIC T6 4,5 T6 (-60 +48C), T4 (-60 ... +90C ) 5,5 15 Y123SE1H1*S
1 3
4 2 1/4 NPT 5/2 UNI 0 ... 12 NBR Without Exd IIC T6 4,7 T6 (-60 +48C), T4 (-60 ... +90C ) 7,5 16 Y115AA1H1*S
G 1/4 5/2 UNI 0 ... 12 NBR Without Exd IIC T6 4,7 T6 (-60 +48C), T4 (-60 ... +90C ) 7,5 16 Y115AE1H1*S
513
N/en/en 5.7.550.02 Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
11/12
ICO4S
11/12 Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
N/en/en 5.7.550.03
ICO4S
1
View A
36,5
55 22
2
20
21
M8
38,5
30
180
1
57
2
32,5
21,5
51 56
2
A
58,5 82
1
36,5
2 View A
20
21
55 22
38,5
M8
30
227
1
104
2
60
58
70
76
55 22
M8
N/en/en 5.7.550.04 Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
11/12
ICO4S
3 A Dimensions shown in mm
Projection/First angle
58,5 82
36,5
2 View A
20
21
55 22
38,5
M8
30
303
2
127
1
85
62
35 76
68
4 A
58,5 82
1
36,5
2 View A
20
21
55 22
38,5
M8
30
235
2
60
105
57
1
26
30,5 39
70 74
1 Conduit connection M20 x 1,5 or 1/2 NPT
2 External earth
11/12 Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
N/en/en 5.7.550.05
ICO4S
Dimensions shown in mm
5
A Projection/First angle
58,5 82
36,5
2 View A
20
21
55 22
38,5
M8
30
192
3
6,8
1
11
63
2
37
27
17
51 38
51
6 A
58,5 82
1
36,5
2 View A
20
21
55 22
38,5
M8
30
200
1
2
77
6
53
42
14
51 57
N/en/en 5.7.550.06 Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
11/12
ICO4S
Dimensions shown in mm
7 A Projection/First angle
58,5 82
36,5
2 View A
20
21
55 22
38,5
M8
30
247,5
1
124,5
2
80,5
78,5
6
14
70 76
8
A
58,5 82
1
36,5
2 View A
20
21
55 22
38,5
M8
30
190
1
2
68
43,5
3
32,5
21,5
51 56
11/12 Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
N/en/en 5.7.550.07
ICO4S
Dimensions shown in mm
9 A Projection/First angle
58,5 82
36,5
2 View A
20
21
55 22
38,5
M8
30
243
1
120
2
80
3
58
70 76 36
10 A
58,5 82
1
36,5
2 View A
20
21
55 22
38,5
M8
30
235
1
105
2
85
3
57
26
39 30
74 70
N/en/en 5.7.550.08 Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
11/12
ICO4S
11 A Dimensions shown in mm
Projection/First angle
58,5 82
36,5
2 View A
20
21
55 22
38,5
M8
30
211
1
2
89
3
64,5
6
53
14
51 57
12 A
58,5 82
1
36,5
2 View A
20
21
55 22
38,5
M8
30
265
1
142
3
102
80
58
2 External earth
70 76 6 Push button manual reset
11/12 Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
N/en/en 5.7.550.09
ICO4S
13 A Dimensions shown in mm
Projection/First angle
58,5 82
36,5
2 View A
20
21
55 22
38,5
M8
30
186
1
63
2
39
3
28
17
7
51 56
14 A
58,5 82
1
36,5
2 View A
20
21
55 22
38,5
M8
30
243
1
120
2
80
3
58
36
70
N/en/en 5.7.550.010 Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
11/12
ICO4S
15 A Dimensions shown in mm
Projection/First angle
58,5 82
36,5
2 View A
20
21
55 22
38,5
M8
30
211
1
2
89
3
64,5
5
53
42
51 57
16 A
58,5 82
1
36,5
2 View A
20
21
55 22
38,5
M8
30
264
2
48
??
1
48
4
48
41
5
17
11/12 Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
N/en/en 5.7.550.11
ICO4S
Warning
These products are intended for use in industrial compressed air equipment in the event of such failure.
systems only. Do not use these products where pressures and System designers must provide a warning to end users in the system
temperatures can exceed those listed under Technical features. instructional manual if protection against a failure mode cannot be
adequately provided.
Before using these products with fluids other than those specified,
for non-industrial applications, life-support systems, or other System designers and end users are cautioned to review specific
applications not within published specifications, consult NORGREN. warnings found in instruction sheets packed and shipped with these
Through misuse, age, or malfunction, components used in fluid products.
power systems can fail in various modes. Functional safety (SIL):
The system designer is warned to consider the failure modes of Suitable for certain applications can only be evaluated through
all component parts used in pneumatic systems and to provide examination of each safety-related overall system with regard to the
adequate safeguards to prevent personal injury or damage to requirements of IEC 61508/61511.
N/en/en 5.7.550.12 Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
11/12