Beruflich Dokumente
Kultur Dokumente
Increase safety
and decrease
labor costs
Designed
for safety.
Whether it's a new installation or a replacement
project, lighting maintenance tasks can be
dangerous, labor intensive and costly.
Make your job safer, faster and easier
Introducing
with V-Spring telescoping light poles.
The new, patent-pending V-Spring telescoping light pole
from Eaton's Crouse-Hinds business increases safety and
decreases labor costs associated with lighting installation
and routine maintenance.
-V-Spring
Its innovative design allows for all work to safely take Install and maintain lighting fixtures
place on the platform or walkway, eliminating the need for
portable ladders and fall protection equipment. without ever leaving the ground.
Application
For luminaires installed on industrial walkways,
platforms, stairways and conveyors where OSHA/HSE
regulations require fall prevention equipment
Hard to reach or dangerous areas where safety is a big
concern
Hazardous and harsh environments subject to corrosive
agents, vibration and extreme temperatures
Certifications
UL1598
CSA C22.2 No. 250.0-08
Simple vertical travel
cULus listed for Class I, Easily extend to any raised
Division 2, Class II, Division 2 height one product covers
when used with Champ multiple mounting heights
series luminaires
Luminaire housing will not fall
Environmental ratings from mounting module hinge
Common hook during installation or
Dusttight 1-" trade size
raised maintenance
NEMA 4, IP66 height No pinch points protects hands
8.5' and fingers
Wind rated to 230 mph per
AASHTO standards Less force exerted on handrail
Vibration
Simple operation
DNV No. 2.4: 2006
Innovative design
IEC 60068-2-6: 2007 eliminates consideration
of surrounding
obstructions
Telescoping design
Materials
allows for safe transport
Light pole options on job site
Structural steel: A36-500 Easily adjust fixture
Compressed
Hot dip galvanized: ASTM 123 position from ground or
height
walkway
Aluminum: T6061 5.4'
Stainless steel: 316 grade Designed for harsh environments
Compression spring Classified and hazardous locations
Stainless steel No lubricants or maintenance
required
Hardware Rated for corrosive, wet, dusty, hot
Xylan 1400 coated for Internal conduit and cold conditions prior to use of
corrosion protection optional harsh environment cover
Protects wiring from
spring assist mechanism
Cable
12/3 AWG* UL/CSA Listed
600V, -40C to 105C
Sun- and oil-resistant, FT1, Rugged construction
FT2
2" bottom pole for
ROHS II Reach higher structural
wind ratings
Weather cover
Spring assist Internal conduit for
60 Duro high UV-resistant cable protection and
Provides true controlled
EPDM moisture resistance
lowering
Weights Less force required to
raise or lower luminaire
Handrail stanchion and wall no strain on worker
models:
Eliminates the need for
- Structural steel: 42 lbs.
portable ladders and fall
- Aluminum: 23 lbs.
prevention equipment Fully assembled and wired
Base/structural model: Multiple fixture capability Factory assembled wired and
- Structural steel: 70 lbs.
sealed for maximum
- Aluminum: 34 lbs.
2.0" trade size environmental protection
Maximum luminaire weight Reduces installation time
50 lbs. (recommended weight Drains Ideal for mod yard construction
for one person operation)
1-" external thread
" internal thread
#1
HSE regulations require fall prevention equipment any time a worker
is exposed to a fall of six feet or greater.
The most frequently
While personal protection equipment will help protect workers from cited OSHA violation
threat, there is still a risk of injury from a fall. Preventing the worker
from being exposed to the threat altogether is the most effective
is fall protection
risk-reduction measure.
No pinch points
The V-Spring locking collar has no rotating parts during
operation, protecting hands and fingers from injury.
34% on construction
sites are from falls
Protect
what's
important
Every $1
invested in
safety
returns $3
to $6
Source:
Liberty Mutual Institute for Safety
The only pole replacement solution listed for classified and hazardous locations.
Replacement
made easy
If you are looking to upgrade
your facility's lighting technology,
use the V-Spring telescoping
pole as a labor-saving installation
tool. With our pole removal tool,
the V-Spring can easily replace
existing lighting systems,
allowing you to quickly and
safely install your new Secure pole removal tool Safely cut existing pole Release pin and lower pole
luminaires from the ground.
Top hat
Labor savings options
Minimum order quantity: 10 pieces
V65
V-Spring telescoping light BLANK No cover T57 Form 7 1-"
pole
C
Installed cover for T58 Form 8 1-"
locking collar
Mark 9 (aluminum with
T59SX77
ground screw) 1-"
Mounting
T57SA Form 7 (aluminum) 1-"
B Base
*Contact factory for additional
W Wall labor saving options
H Handrail stanchion
trade size
Top hat* 2.0"
All that is needed to
Stanchion mounting kits operate is " allen wrench
must be ordered separately. JM5 25 angled top hat
Material
G Galvanized steel
A Aluminum
S 316 stainless steel
Luminaire mounts
Luminaire mounts - galvanized steel
LMB-FR240
Champ only luminaire mounts - aluminum
LMB-MP40 LMB-FL40
JM5 25 angled top hat
PM5 Straight top hat
Contact factory for aluminum or stainless options.
1-"
2"
2"
Material MHK-RA G
Material
G Galvanized steel
G Galvanized steel
S Stainless steel Material
S Stainless steel
G Galvanized steel
S Stainless steel
NOTE:
All mounting hardware for base
and wall are included with pole.
Wall mount bracket included
(MHK-WG)
Column or wall
14" square
base plate
www.crouse-hinds.com/cospec
If further assistance is
required, please contact
an authorized Eaton
Europe (Germany) China India
Distributor, Sales Office,
49 (0) 6271 806-500 86-21-2899-3600 91-124-4683888
or Customer Service 49 (0) 6271 806-476 FAX: 86-21-2899-4055 FAX: 91-124-4683899
Department. sales.CCH.de@ cchsales@ cchindia@eaton.com
cooperindustries.com cooperindustries.com
Eaton's Crouse-Hinds
1201 Wolf Street
Syracuse, NY 13208
Crouse-Hinds.com
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
2015 Eaton
All Rights Reserved Eaton is a registered trademark.
Printed in USA
Publication No. 5161-1015 All other trademarks are property
October 2015 of their respective owners.