Beruflich Dokumente
Kultur Dokumente
Minimum foam prevents sump overflow or erratic They are an excellent recommendation for many other
governor operation. industrial applications including air compression.
Fast air release minimizes possibility of pump Chevron GST Oils are formulated with ISO SYN base
cavitation in systems with high circulation rates and stocks.
small reservoirs.
Higher temperatures in advanced gas and steam
Superior thermal stability minimizes deposit turbines require a circulating system oil with
formation. exceptional high temperature stability. Chevron GST
Rapid water separation keeps water in oil to a Oils have outstanding thermal and oxidation
minimum. stability.
Hydraulic fluid service Chevron GST Oils Nonvolatile oxidation inhibition minimizes the
ISO 32, 46, and 68 are excellent hydraulic fluids in evaporative loss of the inhibitors, a common problem
low pressure systems up to 1000 psi. with turbine oils where bearing temperatures are high
Air compressor lubricant when OEM recommends and system capacities are limited. With retained
R&O type oil. oxidation resistance for long periods under high
Environmental benefits All grades are temperature conditions, Chevron GST Oils have proven
ashless. This facilitates reclaiming and recycling of they will provide longer oil service life and reduced
the used oils. Chevron GST Oils are not expected to turbine down time.
be harmful to aquatic organisms. Corrosion inhibition protects costly turbine shafts
and gears from corrosion and rusting.
Chevron GST Oils have excellent demulsibility
characteristics which allow these oils to maintain a high
film strength coating on critical wear points of bearings
and gear reducers and assure fast removal of water
contamination.
Foam inhibition prevents sump overflow and erratic
governor operation.
2009 Chevron Products Company, San Ramon, CA. All rights reserved. 12 March 2009
All trademarks are the property of Chevron Intellectual Property LLC. IO-85
Chevron GST Oils Continued
12 March 2009
IO-85
Chevron GST Oils Continued
Typical test data are average values only. Minor variations which do not affect product performance are to be expected in normal
manufacturing.
1 Hours to 2.0 mg KOH/g acid number modified D943
2 Minutes to 25 psi pressure drop
12 March 2009
IO-85