Beruflich Dokumente
Kultur Dokumente
and Resolve
ver1
ver1 rev1
rev 1
www.tangentwave.co.uk
element and Resolve ver1
ver1 rev1
Table of Contents
1. Requirements.................................................................................................................... 2
2. Quick Start ........................................................................................................................ 2
3. Configuring Resolve to use the Element panel .................................................................. 3
4. Mapping ............................................................................................................................ 4
4.1 Tk panel ...................................................................................................................... 4
4.2 Bt panel Master Menu.................................................................................................. 6
4.3 Sizing control group ..................................................................................................... 7
4.4 Primary control group .................................................................................................. 8
4.5 Log control group......................................................................................................... 9
4.6 Curves control group ................................................................................................. 10
4.7 H Clip control group ................................................................................................... 11
4.8 L Clip control group ................................................................................................... 12
4.9 Node control group .................................................................................................... 13
4.10 Primary Adj control group ........................................................................................ 14
4.11 HSL Qualifier control group...................................................................................... 15
4.12 HSL Qualifier 2 control group................................................................................... 16
4.13 Window control group .............................................................................................. 17
4.14 Blur control group .................................................................................................... 18
4.15 Key control group .................................................................................................... 19
4.16 Version control group............................................................................................... 20
4.17 Gallery control group ............................................................................................... 21
4.18 Stereo 3D control group........................................................................................... 22
4.19 Mf panel................................................................................................................... 23
5. Resetting a knob value on the Kb panel .......................................................................... 24
6. Control sensitivities ......................................................................................................... 24
7. Important - note the following .......................................................................................... 25
1
element and Resolve ver1
ver1 rev1
1. Requirements
You will need the latest Resolve or any version that supports the Tangent Element
panels.
You will need the latest Tangent Hub.
2. Quick Start
1. Install Resolve.
2. Install the Tangent Hub.
3. Plug in the Element panels.
4. Start Resolve.
5. Set Resolve preferences to use Element.
6. Quit and restart Resolve.
7. The Element panels will now control Resolve.
The rest of this document explains the above steps in more details.
2
element and Resolve ver1
ver1 rev1
1. Download and install the Tangent Hub package from our website:
www.tangentwave.co.uk/support
5. Hit Save
Resolve may prompt you to restart Resolve in order for the changes to take effect.
3
element and Resolve ver1
ver1 rev1
4. Mapping
The following section describes how Resolve has mapped the controls on the Element
panels. What the controls are mapped to in Resolve is fixed by the application and
cannot be changed.
4.1 Tk panel
In Resolve select Color Wheels and set the values view to be Primary Wheels.
The three trackerballs and rings control the Lift, Gamma, and Gain YRGB values.
Note that each is mapped to a ball / ring:
With the way Blackmagic Design have mapped the controls the trackerball will
affect only the RGB differential values without altering Y. The dial will affect the
overall luminance (Y) and the RGB values.
Resets
Note each trackerball / ring has its own reset buttons that will affect just that
ball and dial.
The Ball Reset will reset the RGB values. The Dial Reset will reset
the YRGB values.
4
element and Resolve ver1
ver1 rev1
Note that the Resolve menu File -> Project Settings Color tab Master
reset retains RGB balance option will affect how the resets work. For this
guide we had this option unticked.
A and B buttons
The B button toggles the Resolve BYPASS mode and turns the current grade
on and off.
5
element and Resolve ver1
ver1 rev1
The Bt panel has two master menus, accessed by pressing the A or B buttons on
the Bt panel. Pressing the A button will bring up the Master Menu A, and pressing
the B button will bring up the Master Menu B.
The other buttons on the Bt panel are labelled with their functions on the panels
display. Pressing one of these buttons will take you to the corresponding controls
that are available for that control group. So for example press Sizing - you will
now see the Bt and Kb panels show you the sizing controls. Press either the A or B
button on the Bt panel to return to the Master Menu.
The next sections describe what is controlled by the Bt and Kb panels in each
control group.
6
element and Resolve ver1
ver1 rev1
7
element and Resolve ver1
ver1 rev1
Primary controls correspond to controls on the Primaries palette, letting you adjust
color and contrast in different ways.
Log > and Primary Adj > buttons let you open those pages of controls.
8
element and Resolve ver1
ver1 rev1
Log controls correspond to controls on the Log mode of the Color Wheels palette,
letting you adjust color and contrast.
Primary > and Primary Adj > buttons let you open those pages of controls.
9
element and Resolve ver1
ver1 rev1
Curves controls correspond to controls on the Curves palette, letting you adjust
specific curve parameters.
10
element and Resolve ver1
ver1 rev1
H Clip controls correspond to half of the controls on the Soft Clip mode of the
Curves palette.
11
element and Resolve ver1
ver1 rev1
L Clip controls correspond to half of the controls on the Soft Clip mode of the
Curves palette.
12
element and Resolve ver1
ver1 rev1
Node controls let you create, disable, and delete nodes as you work. Some of
these controls are mirrored on the Mf panel.
13
element and Resolve ver1
ver1 rev1
Primary Adj. controls let you adjust the Highlight recovery, Color Boost, Shadows
recovery, and Midtone Detail parameters located in the Color Match palette.
Primary > and Log > let you switch to those pages of controls.
14
element and Resolve ver1
ver1 rev1
HSL Qualifier controls let you adjust half of the parameters of the HSL keyer on the
Qualifier palette, including the Matte Finesse controls.
15
element and Resolve ver1
ver1 rev1
HSL Qualifier 2 controls let you adjust the other half of the parameters of the HSL
keyer on the Qualifier palette.
16
element and Resolve ver1
ver1 rev1
Window controls let you adjust parameters of the Window palette, used to create
and manipulate shapes with which to qualify corrections. Also contains controls to
track windows forward and backward to match motion in the shot. Softness options
change depending on the selected window.
17
element and Resolve ver1
ver1 rev1
Blur controls let you adjust parameters of the Blur palette, used for both blurring
and sharpening the image.
18
element and Resolve ver1
ver1 rev1
19
element and Resolve ver1
ver1 rev1
Version controls let you add and switch among versions of grades, as well as
providing buttons for Original Memory and Preview Memory.
20
element and Resolve ver1
ver1 rev1
Gallery controls let you switch among stills, change the reference mode, wipe type,
and adjust the wipe position.
21
element and Resolve ver1
ver1 rev1
Stereo 3D controls let you adjust controls and parameters found in the Stereo 3D
palette, for working on stereoscopic pairs of clips.
22
element and Resolve ver1
ver1 rev1
4.19 Mf panel
The Mf panel has two pages of menus accessed by pressing either the A or B
buttons on the Mf panel.
Menu A buttons let you navigate among different frames and keyframes, create
keyframes, undo, turn on playback looping, and save.
23
element and Resolve ver1
ver1 rev1
Menu B buttons let you create, disable, and delete nodes, grab and play stills,
navigate nodes, reset nodes, and turn on unmix in the Viewer.
6. Control sensitivities
The sensitivity of the controls how much a value changes by when you move a control
- can be adjusted in Resolve. Go to the Resolve menu File -> Project Settings to
open the Project Settings window and click on the Control Panel tab. You will now see
the following window:
24
element and Resolve ver1
ver1 rev1
For each Lift, Gamma, Gain control you will see RGB balance sensitivity and Lift
master sensitivity.
RGB balance sets the sensitivity for the trackerball.
Lift master sets the sensitivity for the dial.
25