Beruflich Dokumente
Kultur Dokumente
(Ans: c)
(Ans: d)
(Ans: c)
(Ans: d)
A hollow prismatic beam of circular section is subjected to a torsional moment. The maximum shear stress occurs at
(a) inner wall of cross section
(b) middle of thickness
(c) outer surface of shaft
(d) none of these
(Ans: c)
Q.8. At fully plastic twisting moment
(a) only fibres at surface are stressed to yield point in shear
(b) fibres at centre are stressed to yield point in shear
(c) all fibres are stressed to yield point in shear
(d) none of these
(Ans: c)
(Ans: d)
The springs in brakes and clutches are used
(Ans: a)
(Ans: b)
With identical beam and column, buckling occurs as compared to bending under a
(a) Lesser load
(b) Larger load
(c) Equal load
(d) None
(Ans: a)
Nature of stresses produced in buckling and bending are
(a) Same
(b) Different
(c) Only tensile
(d) None
(Ans: a)
Keeping loading same but increasing the length, normal stresses in a beam will
(a) Increase
(b) Decrease
(c) No change
(d) None
(Ans: a)
Keeping loading same but increasing the length, shear stresses in a beam will
(a) Increase
(b) Decrease
(c) No change
(d) None
(Ans: c)
Keeping loading same but increasing the length, normal stresses in a long column will
(e) Increase
(f) Decrease
(g) No change
(h) None
(Ans: b)
A long column with fixed ends can carry load as compared to both ends hinged
(a) 4 times
(b) 8 times
(c) 16 times
(d) None
(Ans: a)
A long column with fixed ends can carry load as compared to cantilever column
(e) 4 times
(f) 8 times
(g) 16 times
(h) None
(Ans: c)
(a) More
(b) Less
(c) Same
(d) Negligible
(c) Equal to
(a) 2 m
(b) 1 m
(c) 3 m
(d) 6 m
(a) 0-60
(b) 0-80
(c) 0-100
(d)More than 80
With identical beam and column, buckling occurs as compared to bending under a
(a) Lesser load
(b) Larger load
(c) Equal load
(d) None
(Ans: a)
Keeping loading same but increasing the length, shear stresses in a beam will
(a) Increase
(b) Decrease
(c) No change
(d) None
(Ans: c)
Keeping loading same but increasing the length, normal stresses in a long column will
(e) Increase
(f) Decrease
(g) No change
(h) None
(Ans: b)
A long column with fixed ends can carry load as compared to both ends hinged
(a) 4 times
(b) 8 times
(c) 16 times
(d) None
(Ans: a)
A long column with fixed ends can carry load as compared to cantilever column
(e) 4 times
(f) 8 times
(g) 16 times
(h) None
(Ans: c)
Spring index is
(a) D d
(b) D/d
(c) D2 d2
(d) None
(Ans: b)
Resilience of spring is
(a) Strain energy per unit length
(b) Strain energy per unit area
(c) Strain energy per unit mass
(d) None
(Ans: d)
Wahls stress concentration factor is used in close coiled springs under axial load to account for
(d) none
(Ans:b)
There are number of laminations in a
(d) None
(Ans: d)
(d) None
(Ans: c)
(a) > 1
(b) = 1
(c) < 1
(d) None
(Ans: a)
(a) 0 and 5
(b) 5 and 10
(c) 10 and 15
(d) None
(Ans: b)
(a) Watches
(b) Sofas
(c) Motorcycles
(d) None
(Ans: d)