Sie sind auf Seite 1von 6

TRF LIMITED

A Enterprise
Impact Crushers TRF LIMITED
A Enterprise
TRF LIMITED
A Enterprise
Impact Crusher [ type HB With Hammer repositioning after one face wears out. The hammer bars are
Bar Arrangement of Mn steel castings. MODEL KR
TRF Hammer Bar type Impact Crushers are suitable for
crushing hard rocks such as limestone, dolomite, granite and
Breaker Plates Impact Crushers
other similar materials under toughest operating conditions. Two or three Breaker plates of Mn Steel casting are
positioned to form an arc of the circle centered to the point of
impact. The first plate is normally fixed in initial crushing
Rotor
zone. The second and the last plates are suspended from
The rotor is made of high-carbon steel casting, and has the frame through hinged connections. These are adjustable
wedge-shape hammer holding grooves extending parallel to by heavy duty coil spring.
the shaft. Its peripheral part is hardened by high frequency
induction heating for greater wear resistance. The shaft is
Frame
press fitted and the rotor shaft assembly is dynamically
balanced to assure vibration free operation. The frame is fabricated with heavy steel plates and is stress
relieved. Inside surface of the frame is provided with cast Mn
steel liners.
Hammer Bars
Approximate Capacity & Dimensions
The hammer bars extend over the full width of the rotor. The
bars are so designed that these can be reused by Model Rotor Max. Capacity Rotor Drive Length Width Height Approx.
& size Feed (TPH) Speed (KW) (mm) (mm) (mm) Weight
Size Dia x Width size (M./Sec) (Kg)
(mm) (mm)
MODEL KC MODEL KS KC 14/2100 2100X2100 1000X1500 350-900 15-35 300-750 5300 3400 4100 82000

KS 12/2100 1800X2100 300 X 450 200-400 20-40 150-360 4700 3200 3140 38000

KR 9/1400 1400X1400 100 X 100 150-200 21-30 110-130 3560 2830 3080 13500

Likhra / Jsr. (0657) 2291356


1. KC type is designed as primary crusher for crushing limestone and dolomite.
2. KS type is extensively used as a secondary crusher for crushing limestone, dolomite and other friable materials.
2A. Both KC and KS types are one way machines capable of accepting large lump sizes comparative to reversible design
Impactors.
3. KR type is reversible machine and used extensively for fine crushing of gravels, coke, etc..

TECHNICAL SPECIFICATIONS
HEAD OFFICE & WORKS
TRF Limited
11, Station Road Burma Mines, Jamshedpur-831007, Jharkhand
Phone : +91- 657-3046500/ 598
Fax no. : +91- 657-2345732, e-mail : co@trf.co.in

MARKETING OFFICES = High Crushing ratio upto 80


Business Development Department Bulk Material Handling Equi pment Bulk Material Handling Systems
Block - D, 3rd Floor, Assistant Divisional Manager Port &Yard Equi pment Division = Reversible rotation which maximises use/life of hammers and grinding blocks
Cell: +91-9304813195 Assistant General Manager
22 Camac Street, Kolkata - 700 016
Ph: +91-657-3046259
Ph : +91-33-44033553 Fax: +91 - 657-2345724
Cell : + 91 - 9334002278 = Easy maintenance
e-mail : biz.development@trf.co.in e-mail: r.k.shukla@trf.co.in Ph : +91-657 - 3046242
Capacities are based on reducing an average limestone to a product of 20 mm and under, when operating in closed circuit with a screen. Fax : +91-657-2345214 = Suitable for fine crushing
e-mail : dcjha@trf.co.in
Ratings & dimensions are approximate.
REGIONAL OFFICES = High crushing efficiency
NEW DELHI MUMBAI HYDERABAD
Himalaya House, Magnet House, 1st Floor, Flat No. 601, 6th Floor,
11th Floor 23, Kasturba Gandhi Marg Narottam Morarji Marg, Ballard Estate, Paigah Plaza, Basheerbagh,
Ph : +91-11-223310788 / 23314540 Ph : +91-22-22616853 / 22641320 Ph : +91-40-23297630 / 23297631
Fax : +91-11-23722447 Fax : +91-22-22614085 Fax : +91-40-23297363
e-mail : nd@trf.co.in e-mail : mum@trf.co.in e-mail : hyd@trf.co.in
TRF LIMITED
A Enterprise
Impact Crushers TRF LIMITED
A Enterprise
TRF LIMITED
A Enterprise
Impact Crusher [ type HB With Hammer repositioning after one face wears out. The hammer bars are
Bar Arrangement of Mn steel castings. MODEL KR
TRF Hammer Bar type Impact Crushers are suitable for
crushing hard rocks such as limestone, dolomite, granite and
Breaker Plates Impact Crushers
other similar materials under toughest operating conditions. Two or three Breaker plates of Mn Steel casting are
positioned to form an arc of the circle centered to the point of
impact. The first plate is normally fixed in initial crushing
Rotor
zone. The second and the last plates are suspended from
The rotor is made of high-carbon steel casting, and has the frame through hinged connections. These are adjustable
wedge-shape hammer holding grooves extending parallel to by heavy duty coil spring.
the shaft. Its peripheral part is hardened by high frequency
induction heating for greater wear resistance. The shaft is
Frame
press fitted and the rotor shaft assembly is dynamically
balanced to assure vibration free operation. The frame is fabricated with heavy steel plates and is stress
relieved. Inside surface of the frame is provided with cast Mn
steel liners.
Hammer Bars
Approximate Capacity & Dimensions
The hammer bars extend over the full width of the rotor. The
bars are so designed that these can be reused by Model Rotor Max. Capacity Rotor Drive Length Width Height Approx.
& size Feed (TPH) Speed (KW) (mm) (mm) (mm) Weight
Size Dia x Width size (M./Sec) (Kg)
(mm) (mm)
MODEL KC MODEL KS KC 14/2100 2100X2100 1000X1500 350-900 15-35 300-750 5300 3400 4100 82000

KS 12/2100 1800X2100 300 X 450 200-400 20-40 150-360 4700 3200 3140 38000

KR 9/1400 1400X1400 100 X 100 150-200 21-30 110-130 3560 2830 3080 13500

Likhra / Jsr. (0657) 2291356


1. KC type is designed as primary crusher for crushing limestone and dolomite.
2. KS type is extensively used as a secondary crusher for crushing limestone, dolomite and other friable materials.
2A. Both KC and KS types are one way machines capable of accepting large lump sizes comparative to reversible design
Impactors.
3. KR type is reversible machine and used extensively for fine crushing of gravels, coke, etc..

TECHNICAL SPECIFICATIONS
HEAD OFFICE & WORKS
TRF Limited
11, Station Road Burma Mines, Jamshedpur-831007, Jharkhand
Phone : +91- 657-3046500/ 598
Fax no. : +91- 657-2345732, e-mail : co@trf.co.in

MARKETING OFFICES = High Crushing ratio upto 80


Business Development Department Bulk Material Handling Equi pment Bulk Material Handling Systems
Block - D, 3rd Floor, Assistant Divisional Manager Port &Yard Equi pment Division = Reversible rotation which maximises use/life of hammers and grinding blocks
Cell: +91-9304813195 Assistant General Manager
22 Camac Street, Kolkata - 700 016
Ph: +91-657-3046259
Ph : +91-33-44033553 Fax: +91 - 657-2345724
Cell : + 91 - 9334002278 = Easy maintenance
e-mail : biz.development@trf.co.in e-mail: r.k.shukla@trf.co.in Ph : +91-657 - 3046242
Capacities are based on reducing an average limestone to a product of 20 mm and under, when operating in closed circuit with a screen. Fax : +91-657-2345214 = Suitable for fine crushing
e-mail : dcjha@trf.co.in
Ratings & dimensions are approximate.
REGIONAL OFFICES = High crushing efficiency
NEW DELHI MUMBAI HYDERABAD
Himalaya House, Magnet House, 1st Floor, Flat No. 601, 6th Floor,
11th Floor 23, Kasturba Gandhi Marg Narottam Morarji Marg, Ballard Estate, Paigah Plaza, Basheerbagh,
Ph : +91-11-223310788 / 23314540 Ph : +91-22-22616853 / 22641320 Ph : +91-40-23297630 / 23297631
Fax : +91-11-23722447 Fax : +91-22-22614085 Fax : +91-40-23297363
e-mail : nd@trf.co.in e-mail : mum@trf.co.in e-mail : hyd@trf.co.in
Impact Crushers A
TRF LIMITED
Enterprise
Impact Crushers
General shaft and machined rotor discs keyed to the shaft. The rotor
TYPE TA
is provided with two part hammer arrangement consisting TYPE TE
TRF Impact Crushers are ideal processing machines for of Hammer arms and hammer heads which are arranged
primary and secondary crushing of raw materials for the steel around the circumference of the rotor in a staggered
and iron industry, hard coal and lignite, limestone, gypsum or manner. The quantity of hammers per row is decided
minerals. These are also extensively used for the tertiary depending on the duty requirement. The locating holes for
crus hing of limestone, dolomite, dunite for the Bedding and the hammer arms are drilled on special device with high
Blending Plant for sinter preparation and coal for Coking precision pitch thus eliminating the vibration when the
Plant. Its sturdy and proven design offers the following machine is running.
advantages : The hammer heads on the hammer arms are reversible
= increased throughout capacity and can be worn down to 70% of their original size.
= maximum possible operating reliability
The impact walls are arranged around the rotor and are
= mainly unaffected by foreign bodies
equipped with renewable grinding ledges of wear resistant
= low maintenance cost Overall Dimension in mm
cast material. The final product of the crusher can be
altered by adjusting the distance between the rotating Size A B C D E F G H I K L M N P* Weight
Rotor Rotor Kg
Features hammer heads and the impact walls. At the same time the dia width
1. Crushing ratio can be set at an extremely large value : adjustment serves for the compensation of wear. OVERALL DIMENSION AND CAPACITY (TPH)
TA-1210/10 1000 1000 350 1450 1900 1650 1900 1450 650 800 3900 190 850 1700 6000
normally at 20 and maximum up to 80. Machine Feed Capacity Motor Approx. Hopper Overall
TA-1212/10 1200 1000 400 1800 2100 1750 1980 1700 750 950 4100 200 1000 2000 7500
2. A high crushing efficiency reduces the power In the standard design, the adjustment of the impact walls Size Size TPH hp weight Width Length Length width Height
TA-1212/12 1200 1200 400 1800 2100 1950 2200 1700 750 950 4300 220 1000 2000 8000
consumption. can be earned out while the machine is running by mm tonnes mm mm mm mm mm
TA-1212/14 1200 1400 400 1800 2100 2150 2420 1700 750 950 4300 240 1000 2000 8500 D
regulating the screws on the upper part of the housing A B C E
3. Selective crushing can be made with ease. TA-1218/18 1800 1800 650 2800 3000 2950 3400 2500 1185 1315 5800 420 1600 3100 24000
4. The shape of crushed material will increasingly while the lower adjustment is effected by means of a TE-263 115 15 15-20 1.65 150 280 660 915 660
TA-1218/20 1800 2000 650 2800 3000 3150 3630 2500 1185 1315 5800 450 1600 3100 27000
become cubic. ratchet and worm gear. TA-1218/22 1800 2200 650 2800 3000 3350 3880 2500 1185 1315 5800 500 1600 3100 31000 TE-305 125 20-30 40-60 3.33 250 330 1220 1040 1375
5. Mechanism and operation are simple. TA-1220/22 2000 2200 750 3000 3300 3550 4200 2800 1300 1500 6500 620 1800 3500 44500
TE-309 125 40-60 80-120 5.50 250 990 1375 1800 1525
6. Safety running is assured. Hydraulically Hinged Housing TA-1220/28 2000 2800 700 2500 3300 4150 4500 2800 1300 1500 7800 400 1900 3300 49000
TA-1220/30 2000 3000 700 2500 3300 4350 4850 2800 1300 1500 7800 550 2200 3220 30000 TE-385 200 70 60-100 7.15 355 510 2010 1345 2085
7. Lighter in machine weight as against capacity,
The housing of the Impact Crusher is divided into parts and TA-4014/12 1400 1200 450 1700 2300 1950 2300 1900 850 1050 5000 350 1250 2300 11900
saving installation cost. TE-387 200 110 70-150 8.47 355 760 2010 1600 2085
can be opened hydraulically (or mechanically) on the left TA-4014/14 1400 1400 450 1700 2300 2150 2500 1900 850 1050 5000 350 1250 2300 13400
and right side of the rotor. Thus, all wearing parts become TA-4014/16 1400 1600 450 1700 2300 2350 2700 1900 850 1050 5000 350 1250 2300 14800
TE-389 200 140 125-200 9.79 355 990 2010 1855 2085
TRF manufactures various types of Impact Crushers and
accessible and can be easily replaced. The housing is also TA-4016/14 1600 1400 550 1900 2600 2300 2700 2150 1000 1150 5500 400 1500 2600 18500 TE-409 250 200 125-200 14.85 380 990 2235 2540 2440
hence is in a position to offer the most suitable Crusher
provided with large inspection doors allowing quick TA-4016/16 1600 1600 550 1900 2600 2500 2900 2150 1000 1150 5500 400 1500 2600 22000
required for the specific duty condition. TE-411 250 250 150-350 15.95 380 1245 2235 2795 2440
inspection of the inside condition of the machine. TA-4016/18 1600 1800 550 1900 2600 2700 3100 2150 1000 1150 5500 400 1500 2600 25500

TA-4018/20 1800 2000 600 2100 2800 3000 3500 2400 1100 1300 6000 400 1500 3000 38000 TE-413 250 300 250-400 17.16 380 1500 2235 3050 2440
Impact Crusher (Type TA with two Part TE-415 250 360 300-450 18.26 380 1730 2235 3280 2440
Impact Crushers (type TE With Single
Hammer Arrangement) * For hydraulic design only.
TE-509 380 220 200-400 17.60 915 965 2695 2540 2695
Piece Hammer Arrangement) Note 1. The dimensions are approximate and should not be used for construction purposes. Certified drawings will be furnished on receipt of order.
TE-511 380 290 300-500 18.92 915 1220 2695 2770 2695
Mode of Operation Construction Feature Breaker Blocks TE-513 380 360 400-600 20.35 915 1475 2695 3025 2695
The feed material is crushed by means of rotating beaters with Mode of Operation
Material driven against breaker blocks rebounds and is Frame Breaker blocks are of cast Mn steel and arranged TE-515 380 430 500-700 29.70 915 1730 2695 3250 2695
renewable heads by impact against the grinding ledges. Due symmetrically around the rotor assembly. Breaker blocks
again struck by the hammers, shattering under this high The frame is of heavy fabricated design and is provided with TE-517 380 500 600-800 31.90 915 1985 2695 3660 2695
to the reversible rotor with crushing ledges arranged on both are easily replaceable. The complete grinding wall
velocity impact. Small, finished particles cease to react wear-resistant renewable liners. Large access door is
sides the wearing face of the hammer heads can be used to assembly can be adjusted. TE-519 380 570 700-850 34.10 915 2235 2695 3910 2695
freely to additional hammer blows and are swept from the provided for the inspection of hammers and breaker blocks.
the maximum possible extent without reversing the hammers.
TE-621 380 680 800-1000 60.50 915 2440 3735 4675 3355
active reduction zone. Drive System
The machine is provided with central inlet and open discharge
By this maximum crushing power is applied to large
Rotor Assembly TE-623 380 790 950-1150 66.00 915 2925 3735 5160 3355
which eliminates the chances of clogging of grate opening. Impactor are generally driven by electric motors and V-belts
fragments while little energy is expended on finished The rotor assembly runs in self-aligning spherical roller and sheaves. V-belt drive ensures the future adjustment and TE-625 380 890 1150-1350 73.70 915 3405 3735 5645 3355
particles. The impactor is ideally suited to the closed circuit bearings. The bearings are fitted in dust proof cast steel fine tuning after commissioning for the desired product
Hammers & Crushing Ledges housing with labyrinth seals. Hammers are of cast Mn steel
crushing system to obtain maximum crushing efficiency. gradation. Crushers can also be directly driven by electric Capacities are based on reducing an average limestone to a product of 20 mm and under, when operating in closed circuit with a screen.
The rotor of the crusher consists of a forged heavy duty rotor and free swinging to absorb the crushing shock. motor coupled with the gear box. Ratings & dimensions are approximate.
Impact Crushers A
TRF LIMITED
Enterprise
Impact Crushers
General shaft and machined rotor discs keyed to the shaft. The rotor
TYPE TA
is provided with two part hammer arrangement consisting TYPE TE
TRF Impact Crushers are ideal processing machines for of Hammer arms and hammer heads which are arranged
primary and secondary crushing of raw materials for the steel around the circumference of the rotor in a staggered
and iron industry, hard coal and lignite, limestone, gypsum or manner. The quantity of hammers per row is decided
minerals. These are also extensively used for the tertiary depending on the duty requirement. The locating holes for
crus hing of limestone, dolomite, dunite for the Bedding and the hammer arms are drilled on special device with high
Blending Plant for sinter preparation and coal for Coking precision pitch thus eliminating the vibration when the
Plant. Its sturdy and proven design offers the following machine is running.
advantages : The hammer heads on the hammer arms are reversible
= increased throughout capacity and can be worn down to 70% of their original size.
= maximum possible operating reliability
The impact walls are arranged around the rotor and are
= mainly unaffected by foreign bodies
equipped with renewable grinding ledges of wear resistant
= low maintenance cost Overall Dimension in mm
cast material. The final product of the crusher can be
altered by adjusting the distance between the rotating Size A B C D E F G H I K L M N P* Weight
Rotor Rotor Kg
Features hammer heads and the impact walls. At the same time the dia width
1. Crushing ratio can be set at an extremely large value : adjustment serves for the compensation of wear. OVERALL DIMENSION AND CAPACITY (TPH)
TA-1210/10 1000 1000 350 1450 1900 1650 1900 1450 650 800 3900 190 850 1700 6000
normally at 20 and maximum up to 80. Machine Feed Capacity Motor Approx. Hopper Overall
TA-1212/10 1200 1000 400 1800 2100 1750 1980 1700 750 950 4100 200 1000 2000 7500
2. A high crushing efficiency reduces the power In the standard design, the adjustment of the impact walls Size Size TPH hp weight Width Length Length width Height
TA-1212/12 1200 1200 400 1800 2100 1950 2200 1700 750 950 4300 220 1000 2000 8000
consumption. can be earned out while the machine is running by mm tonnes mm mm mm mm mm
TA-1212/14 1200 1400 400 1800 2100 2150 2420 1700 750 950 4300 240 1000 2000 8500 D
regulating the screws on the upper part of the housing A B C E
3. Selective crushing can be made with ease. TA-1218/18 1800 1800 650 2800 3000 2950 3400 2500 1185 1315 5800 420 1600 3100 24000
4. The shape of crushed material will increasingly while the lower adjustment is effected by means of a TE-263 115 15 15-20 1.65 150 280 660 915 660
TA-1218/20 1800 2000 650 2800 3000 3150 3630 2500 1185 1315 5800 450 1600 3100 27000
become cubic. ratchet and worm gear. TA-1218/22 1800 2200 650 2800 3000 3350 3880 2500 1185 1315 5800 500 1600 3100 31000 TE-305 125 20-30 40-60 3.33 250 330 1220 1040 1375
5. Mechanism and operation are simple. TA-1220/22 2000 2200 750 3000 3300 3550 4200 2800 1300 1500 6500 620 1800 3500 44500
TE-309 125 40-60 80-120 5.50 250 990 1375 1800 1525
6. Safety running is assured. Hydraulically Hinged Housing TA-1220/28 2000 2800 700 2500 3300 4150 4500 2800 1300 1500 7800 400 1900 3300 49000
TA-1220/30 2000 3000 700 2500 3300 4350 4850 2800 1300 1500 7800 550 2200 3220 30000 TE-385 200 70 60-100 7.15 355 510 2010 1345 2085
7. Lighter in machine weight as against capacity,
The housing of the Impact Crusher is divided into parts and TA-4014/12 1400 1200 450 1700 2300 1950 2300 1900 850 1050 5000 350 1250 2300 11900
saving installation cost. TE-387 200 110 70-150 8.47 355 760 2010 1600 2085
can be opened hydraulically (or mechanically) on the left TA-4014/14 1400 1400 450 1700 2300 2150 2500 1900 850 1050 5000 350 1250 2300 13400
and right side of the rotor. Thus, all wearing parts become TA-4014/16 1400 1600 450 1700 2300 2350 2700 1900 850 1050 5000 350 1250 2300 14800
TE-389 200 140 125-200 9.79 355 990 2010 1855 2085
TRF manufactures various types of Impact Crushers and
accessible and can be easily replaced. The housing is also TA-4016/14 1600 1400 550 1900 2600 2300 2700 2150 1000 1150 5500 400 1500 2600 18500 TE-409 250 200 125-200 14.85 380 990 2235 2540 2440
hence is in a position to offer the most suitable Crusher
provided with large inspection doors allowing quick TA-4016/16 1600 1600 550 1900 2600 2500 2900 2150 1000 1150 5500 400 1500 2600 22000
required for the specific duty condition. TE-411 250 250 150-350 15.95 380 1245 2235 2795 2440
inspection of the inside condition of the machine. TA-4016/18 1600 1800 550 1900 2600 2700 3100 2150 1000 1150 5500 400 1500 2600 25500

TA-4018/20 1800 2000 600 2100 2800 3000 3500 2400 1100 1300 6000 400 1500 3000 38000 TE-413 250 300 250-400 17.16 380 1500 2235 3050 2440
Impact Crusher (Type TA with two Part TE-415 250 360 300-450 18.26 380 1730 2235 3280 2440
Impact Crushers (type TE With Single
Hammer Arrangement) * For hydraulic design only.
TE-509 380 220 200-400 17.60 915 965 2695 2540 2695
Piece Hammer Arrangement) Note 1. The dimensions are approximate and should not be used for construction purposes. Certified drawings will be furnished on receipt of order.
TE-511 380 290 300-500 18.92 915 1220 2695 2770 2695
Mode of Operation Construction Feature Breaker Blocks TE-513 380 360 400-600 20.35 915 1475 2695 3025 2695
The feed material is crushed by means of rotating beaters with Mode of Operation
Material driven against breaker blocks rebounds and is Frame Breaker blocks are of cast Mn steel and arranged TE-515 380 430 500-700 29.70 915 1730 2695 3250 2695
renewable heads by impact against the grinding ledges. Due symmetrically around the rotor assembly. Breaker blocks
again struck by the hammers, shattering under this high The frame is of heavy fabricated design and is provided with TE-517 380 500 600-800 31.90 915 1985 2695 3660 2695
to the reversible rotor with crushing ledges arranged on both are easily replaceable. The complete grinding wall
velocity impact. Small, finished particles cease to react wear-resistant renewable liners. Large access door is
sides the wearing face of the hammer heads can be used to assembly can be adjusted. TE-519 380 570 700-850 34.10 915 2235 2695 3910 2695
freely to additional hammer blows and are swept from the provided for the inspection of hammers and breaker blocks.
the maximum possible extent without reversing the hammers.
TE-621 380 680 800-1000 60.50 915 2440 3735 4675 3355
active reduction zone. Drive System
The machine is provided with central inlet and open discharge
By this maximum crushing power is applied to large
Rotor Assembly TE-623 380 790 950-1150 66.00 915 2925 3735 5160 3355
which eliminates the chances of clogging of grate opening. Impactor are generally driven by electric motors and V-belts
fragments while little energy is expended on finished The rotor assembly runs in self-aligning spherical roller and sheaves. V-belt drive ensures the future adjustment and TE-625 380 890 1150-1350 73.70 915 3405 3735 5645 3355
particles. The impactor is ideally suited to the closed circuit bearings. The bearings are fitted in dust proof cast steel fine tuning after commissioning for the desired product
Hammers & Crushing Ledges housing with labyrinth seals. Hammers are of cast Mn steel
crushing system to obtain maximum crushing efficiency. gradation. Crushers can also be directly driven by electric Capacities are based on reducing an average limestone to a product of 20 mm and under, when operating in closed circuit with a screen.
The rotor of the crusher consists of a forged heavy duty rotor and free swinging to absorb the crushing shock. motor coupled with the gear box. Ratings & dimensions are approximate.
Impact Crushers A
TRF LIMITED
Enterprise
Impact Crushers
General shaft and machined rotor discs keyed to the shaft. The rotor
TYPE TA
is provided with two part hammer arrangement consisting TYPE TE
TRF Impact Crushers are ideal processing machines for of Hammer arms and hammer heads which are arranged
primary and secondary crushing of raw materials for the steel around the circumference of the rotor in a staggered
and iron industry, hard coal and lignite, limestone, gypsum or manner. The quantity of hammers per row is decided
minerals. These are also extensively used for the tertiary depending on the duty requirement. The locating holes for
crus hing of limestone, dolomite, dunite for the Bedding and the hammer arms are drilled on special device with high
Blending Plant for sinter preparation and coal for Coking precision pitch thus eliminating the vibration when the
Plant. Its sturdy and proven design offers the following machine is running.
advantages : The hammer heads on the hammer arms are reversible
= increased throughout capacity and can be worn down to 70% of their original size.
= maximum possible operating reliability
The impact walls are arranged around the rotor and are
= mainly unaffected by foreign bodies
equipped with renewable grinding ledges of wear resistant
= low maintenance cost Overall Dimension in mm
cast material. The final product of the crusher can be
altered by adjusting the distance between the rotating Size A B C D E F G H I K L M N P* Weight
Rotor Rotor Kg
Features hammer heads and the impact walls. At the same time the dia width
1. Crushing ratio can be set at an extremely large value : adjustment serves for the compensation of wear. OVERALL DIMENSION AND CAPACITY (TPH)
TA-1210/10 1000 1000 350 1450 1900 1650 1900 1450 650 800 3900 190 850 1700 6000
normally at 20 and maximum up to 80. Machine Feed Capacity Motor Approx. Hopper Overall
TA-1212/10 1200 1000 400 1800 2100 1750 1980 1700 750 950 4100 200 1000 2000 7500
2. A high crushing efficiency reduces the power In the standard design, the adjustment of the impact walls Size Size TPH hp weight Width Length Length width Height
TA-1212/12 1200 1200 400 1800 2100 1950 2200 1700 750 950 4300 220 1000 2000 8000
consumption. can be earned out while the machine is running by mm tonnes mm mm mm mm mm
TA-1212/14 1200 1400 400 1800 2100 2150 2420 1700 750 950 4300 240 1000 2000 8500 D
regulating the screws on the upper part of the housing A B C E
3. Selective crushing can be made with ease. TA-1218/18 1800 1800 650 2800 3000 2950 3400 2500 1185 1315 5800 420 1600 3100 24000
4. The shape of crushed material will increasingly while the lower adjustment is effected by means of a TE-263 115 15 15-20 1.65 150 280 660 915 660
TA-1218/20 1800 2000 650 2800 3000 3150 3630 2500 1185 1315 5800 450 1600 3100 27000
become cubic. ratchet and worm gear. TA-1218/22 1800 2200 650 2800 3000 3350 3880 2500 1185 1315 5800 500 1600 3100 31000 TE-305 125 20-30 40-60 3.33 250 330 1220 1040 1375
5. Mechanism and operation are simple. TA-1220/22 2000 2200 750 3000 3300 3550 4200 2800 1300 1500 6500 620 1800 3500 44500
TE-309 125 40-60 80-120 5.50 250 990 1375 1800 1525
6. Safety running is assured. Hydraulically Hinged Housing TA-1220/28 2000 2800 700 2500 3300 4150 4500 2800 1300 1500 7800 400 1900 3300 49000
TA-1220/30 2000 3000 700 2500 3300 4350 4850 2800 1300 1500 7800 550 2200 3220 30000 TE-385 200 70 60-100 7.15 355 510 2010 1345 2085
7. Lighter in machine weight as against capacity,
The housing of the Impact Crusher is divided into parts and TA-4014/12 1400 1200 450 1700 2300 1950 2300 1900 850 1050 5000 350 1250 2300 11900
saving installation cost. TE-387 200 110 70-150 8.47 355 760 2010 1600 2085
can be opened hydraulically (or mechanically) on the left TA-4014/14 1400 1400 450 1700 2300 2150 2500 1900 850 1050 5000 350 1250 2300 13400
and right side of the rotor. Thus, all wearing parts become TA-4014/16 1400 1600 450 1700 2300 2350 2700 1900 850 1050 5000 350 1250 2300 14800
TE-389 200 140 125-200 9.79 355 990 2010 1855 2085
TRF manufactures various types of Impact Crushers and
accessible and can be easily replaced. The housing is also TA-4016/14 1600 1400 550 1900 2600 2300 2700 2150 1000 1150 5500 400 1500 2600 18500 TE-409 250 200 125-200 14.85 380 990 2235 2540 2440
hence is in a position to offer the most suitable Crusher
provided with large inspection doors allowing quick TA-4016/16 1600 1600 550 1900 2600 2500 2900 2150 1000 1150 5500 400 1500 2600 22000
required for the specific duty condition. TE-411 250 250 150-350 15.95 380 1245 2235 2795 2440
inspection of the inside condition of the machine. TA-4016/18 1600 1800 550 1900 2600 2700 3100 2150 1000 1150 5500 400 1500 2600 25500

TA-4018/20 1800 2000 600 2100 2800 3000 3500 2400 1100 1300 6000 400 1500 3000 38000 TE-413 250 300 250-400 17.16 380 1500 2235 3050 2440
Impact Crusher (Type TA with two Part TE-415 250 360 300-450 18.26 380 1730 2235 3280 2440
Impact Crushers (type TE With Single
Hammer Arrangement) * For hydraulic design only.
TE-509 380 220 200-400 17.60 915 965 2695 2540 2695
Piece Hammer Arrangement) Note 1. The dimensions are approximate and should not be used for construction purposes. Certified drawings will be furnished on receipt of order.
TE-511 380 290 300-500 18.92 915 1220 2695 2770 2695
Mode of Operation Construction Feature Breaker Blocks TE-513 380 360 400-600 20.35 915 1475 2695 3025 2695
The feed material is crushed by means of rotating beaters with Mode of Operation
Material driven against breaker blocks rebounds and is Frame Breaker blocks are of cast Mn steel and arranged TE-515 380 430 500-700 29.70 915 1730 2695 3250 2695
renewable heads by impact against the grinding ledges. Due symmetrically around the rotor assembly. Breaker blocks
again struck by the hammers, shattering under this high The frame is of heavy fabricated design and is provided with TE-517 380 500 600-800 31.90 915 1985 2695 3660 2695
to the reversible rotor with crushing ledges arranged on both are easily replaceable. The complete grinding wall
velocity impact. Small, finished particles cease to react wear-resistant renewable liners. Large access door is
sides the wearing face of the hammer heads can be used to assembly can be adjusted. TE-519 380 570 700-850 34.10 915 2235 2695 3910 2695
freely to additional hammer blows and are swept from the provided for the inspection of hammers and breaker blocks.
the maximum possible extent without reversing the hammers.
TE-621 380 680 800-1000 60.50 915 2440 3735 4675 3355
active reduction zone. Drive System
The machine is provided with central inlet and open discharge
By this maximum crushing power is applied to large
Rotor Assembly TE-623 380 790 950-1150 66.00 915 2925 3735 5160 3355
which eliminates the chances of clogging of grate opening. Impactor are generally driven by electric motors and V-belts
fragments while little energy is expended on finished The rotor assembly runs in self-aligning spherical roller and sheaves. V-belt drive ensures the future adjustment and TE-625 380 890 1150-1350 73.70 915 3405 3735 5645 3355
particles. The impactor is ideally suited to the closed circuit bearings. The bearings are fitted in dust proof cast steel fine tuning after commissioning for the desired product
Hammers & Crushing Ledges housing with labyrinth seals. Hammers are of cast Mn steel
crushing system to obtain maximum crushing efficiency. gradation. Crushers can also be directly driven by electric Capacities are based on reducing an average limestone to a product of 20 mm and under, when operating in closed circuit with a screen.
The rotor of the crusher consists of a forged heavy duty rotor and free swinging to absorb the crushing shock. motor coupled with the gear box. Ratings & dimensions are approximate.
TRF LIMITED
A Enterprise
Impact Crushers TRF LIMITED
A Enterprise
TRF LIMITED
A Enterprise
Impact Crusher [ type HB With Hammer repositioning after one face wears out. The hammer bars are
Bar Arrangement of Mn steel castings. MODEL KR
TRF Hammer Bar type Impact Crushers are suitable for
crushing hard rocks such as limestone, dolomite, granite and
Breaker Plates Impact Crushers
other similar materials under toughest operating conditions. Two or three Breaker plates of Mn Steel casting are
positioned to form an arc of the circle centered to the point of
impact. The first plate is normally fixed in initial crushing
Rotor
zone. The second and the last plates are suspended from
The rotor is made of high-carbon steel casting, and has the frame through hinged connections. These are adjustable
wedge-shape hammer holding grooves extending parallel to by heavy duty coil spring.
the shaft. Its peripheral part is hardened by high frequency
induction heating for greater wear resistance. The shaft is
Frame
press fitted and the rotor shaft assembly is dynamically
balanced to assure vibration free operation. The frame is fabricated with heavy steel plates and is stress
relieved. Inside surface of the frame is provided with cast Mn
steel liners.
Hammer Bars
Approximate Capacity & Dimensions
The hammer bars extend over the full width of the rotor. The
bars are so designed that these can be reused by Model Rotor Max. Capacity Rotor Drive Length Width Height Approx.
& size Feed (TPH) Speed (KW) (mm) (mm) (mm) Weight
Size Dia x Width size (M./Sec) (Kg)
(mm) (mm)
MODEL KC MODEL KS KC 14/2100 2100X2100 1000X1500 350-900 15-35 300-750 5300 3400 4100 82000

KS 12/2100 1800X2100 300 X 450 200-400 20-40 150-360 4700 3200 3140 38000

KR 9/1400 1400X1400 100 X 100 150-200 21-30 110-130 3560 2830 3080 13500

Likhra / Jsr. (0657) 2291356


1. KC type is designed as primary crusher for crushing limestone and dolomite.
2. KS type is extensively used as a secondary crusher for crushing limestone, dolomite and other friable materials.
2A. Both KC and KS types are one way machines capable of accepting large lump sizes comparative to reversible design
Impactors.
3. KR type is reversible machine and used extensively for fine crushing of gravels, coke, etc..

TECHNICAL SPECIFICATIONS
HEAD OFFICE & WORKS
TRF Limited
11, Station Road Burma Mines, Jamshedpur-831007, Jharkhand
Phone : +91- 657-3046500/ 598
Fax no. : +91- 657-2345732, e-mail : co@trf.co.in

MARKETING OFFICES = High Crushing ratio upto 80


Business Development Department Bulk Material Handling Equi pment Bulk Material Handling Systems
Block - D, 3rd Floor, Assistant Divisional Manager Port &Yard Equi pment Division = Reversible rotation which maximises use/life of hammers and grinding blocks
Cell: +91-9304813195 Assistant General Manager
22 Camac Street, Kolkata - 700 016
Ph: +91-657-3046259
Ph : +91-33-44033553 Fax: +91 - 657-2345724
Cell : + 91 - 9334002278 = Easy maintenance
e-mail : biz.development@trf.co.in e-mail: r.k.shukla@trf.co.in Ph : +91-657 - 3046242
Capacities are based on reducing an average limestone to a product of 20 mm and under, when operating in closed circuit with a screen. Fax : +91-657-2345214 = Suitable for fine crushing
e-mail : dcjha@trf.co.in
Ratings & dimensions are approximate.
REGIONAL OFFICES = High crushing efficiency
NEW DELHI MUMBAI HYDERABAD
Himalaya House, Magnet House, 1st Floor, Flat No. 601, 6th Floor,
11th Floor 23, Kasturba Gandhi Marg Narottam Morarji Marg, Ballard Estate, Paigah Plaza, Basheerbagh,
Ph : +91-11-223310788 / 23314540 Ph : +91-22-22616853 / 22641320 Ph : +91-40-23297630 / 23297631
Fax : +91-11-23722447 Fax : +91-22-22614085 Fax : +91-40-23297363
e-mail : nd@trf.co.in e-mail : mum@trf.co.in e-mail : hyd@trf.co.in

Das könnte Ihnen auch gefallen