Beruflich Dokumente
Kultur Dokumente
44RH
Low-profile and lightweight
raise boring machine for holes
ranging from 1.0 to 1.8 m
(3.5-6 ft.) in diameter
A LIGHTWEIGHT FIGHTER
THE 44RH IS A LOW-PROFILE, LIGHTWEIGHT RAISE BORING DRILL IN ATLAS
COPCOS INTERNATIONALLY ACCLAIMED ROBBINS LINE. THE RIG HAS BEEN
OPTIMIZED FOR LOW CEILINGS AND HOLES UP TO 1.8 METERS IN DIAMETER.
ITS COMPACT DESIGN OFFERS GREATER MANOEUVRABILITY WITHOUT
SACRIFICING HIGH TORQUE AND THRUST. THE ROBBINS 44RH CAN BE
RELIED ON TO DRILL HOLES OF THE DESIRED DIAMETER WITH GREATER
POWER AND EFFICIENCY.
MAIN BENEFITS
A compact powerhouse: With a height of only 3.25 m, the low-profile
Robbins 44RH is designed to provide immense penetrating power in
constricted work spaces. The adaptable rig offers a sturdy worktable,
but with a smaller drilling pad and footprint.
Smart and under control: The 44RH and other Robbins raise boring
drills feature Atlas Copcos intelligent Rig Control System (RCS).
A remote operator can monitor functions and maintain full control of
the rig to guarantee its day-to-day and task-to-task ability to perform.
2
Drive train with hollow shaft for efficient
transmission of flushing media to clear the
pilot hole
+ OPTIMAL DESIGN
Rigid crosshead columns provide efficient torque reaction to extend
the service life of the thrust cylinders. The rigs pipe loader with quick
detachments enables easy installation. The sturdy worktable is available
with a manual or a hydraulic wrenching system for fast, efficient pipe
threading.
+ SMART OPTIONS
The Robbins 44RH is available with a hydraulic wrenching system
for safer, more efficient pipe threading. Additional smart options
are available, including a closed-loop cooling unit and a variety of
transporters to best suit your needs on site.
4
A = 44RH = OPTION
TECHNICAL SPECIFICATIONS
B = 44RH LOW PROFILE = STANDARD
CONTROL SYSTEM A B
Radio remote control for pipe loader
15 m cable to op-panel
Power management
Auto makeup log
Net force control
Surveillance kit (angle indication, length sensor,reamer drop detection, bailing
pressure supervision)
The advanced Radio remote control handles the pipe loader, fast traverse, auto
make up, break out, gear shifting and the hydraulic worktable wrench
Measure While Drilling (MWD)
Bailing pump control
20 or 30 meter cable to OP-panel
RRA, Rig Remote Access
Platform with chair
5
TECHNICAL SPECIFICATIONS
OPERATION DATA
Raise diameter 44RH 44RH low profile
Nominal 1.5 m 5 ft 1.5 m 5 ft
Range 1.0-1.8 m 3.5-6 ft 1.0-1.8 m 3.5-6 ft
Raise length
Nominal 340 m 1 115 ft 340 m 1 115 ft
Maximum 610 m 2 000 ft 610 m 2 000 ft
Maximum torque
Reaming 75 kNm 55 000 ft-lbs 75 kNm 55 000 ft-lbs
Break out 96 kNm 70 805 ft-lbs 96 kNm 70 805 ft-lbs
Reaming thrust
2 000 kN 450 000 lbs 2 000 kN 450 000 lbs
Stroke
1 710 mm 67" 1 235 mm 49"
RPM
Pilot 0-60 rpm 0-60 rpm
Reaming (Reduced torque) 0-16 rpm (16-25 rpm) 0-16 rpm (16-25 rpm)
Traverse rate
Fast traverse rate 5.9 m/min 19.4 ft/min 5.9 m/min 19.4 ft/min
Feed rate 3 m/min 9.8 ft/min 3 m/min 9.8 ft/min
Bailing
Air 13 m3min (7bar) 459 ft3/min (100 psi) 13 m3min (7bar) 459 ft3/min (100 psi)
Water 450 l/min 119 gallon/min 450 l/min 119 gallon/min
Electrical
Power supply 165/190 kW (50/60 Hz) 165/190 kW (50/60 Hz)
Voltage 400-1 000 V 400-1 000 V
Frequency 50-60 Hz 50-60 Hz
Power requirement 198/227 kvA (50/60 Hz) 198/227 kvA (50/60 Hz)
Drill pipe
Diameter 203 mm 8" 203 mm 8"
Optional 254 mm 10" 254 mm 10"
Length s/s 1 219 mm 48" 750 mm 30"
Pilot hole
Diameter 229 mm 9" 229 mm 9"
Optional diameter 279 mm 11" 279 mm 11"
Cooling water
at 25C inlet temperature 60 l/min 15.8 gal/min 60 l/min 15.8 gal/min
6
TECHNICAL SPECIFICATIONS
7
COMMITTED TO SUSTAINABLE PRODUCTIVITY
We stand by our responsibilties towards our customers,
towards the environment and the people around us.
www.atlascopco.com
9851 2963 01 2016-04 rebro, Sweden. Legal Notice Copyright 2013, Atlas Copco Rock Drills AB, rebro, Sweden. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and
photos may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Atlas Copco Customer
Center for specific information.