Beruflich Dokumente
Kultur Dokumente
Table A150. 1, Torque values for Class 150, ASME B16.5 and ASME B16.47 Series A.
Flange Rating Class 150, ASME B16.5 and ASME B16.47 Series A
Bolting Materials ASTM A193 Gr. B7/B16, ASTM A320 Gr. L7/L43
Max. Temperature. 350 deg.C
Sl. No. Flange Size Bolting Limited Bolt Torque for Bolt. Torque for Coated Bolt. Remarks.
NPS (DN) No. x Dia. Stress (Mpa). Molykote 1000/ eqvt. (Nm).
( = 0.17).
(Nm).
100%. 30%. 60%. 100%. 30%. 60%.
(Note - (Note - (Note - (Note -
1 1/2 (15) 4 x 1/2 344 94 28.2 56.4 83 24.9 49.8
2 3/4 (20) 4 x 1/2 344 94 28.2 56.4 83 24.9 49.8
3 1 (25) 4 x 1/2 344 94 28.2 56.4 83 24.9 49.8
4 1-1/2 (40) 4 x 1/2 344 94 28.2 56.4 83 24.9 49.8
5 2 (50) 4 x 5/8 344 184 55.2 110.4 162 48.6 97.2
6 3 (80) 4 x 5/8 344 184 55.2 110.4 162 48.6 97.2
7 4 (100) 8 x 5/8 344 184 55.2 110.4 162 48.6 97.2
8 6 (150) 8 x 3/4 344 318 95.4 190.8 280 84 168
9 8 (200) 8 x 3/4 344 318 95.4 190.8 280 84 168
10 10 (250) 12 x 7/8 344 504 151.2 302.4 445 133.5 267
11 12 (300) 12 x 7/8 344 504 151.2 302.4 445 133.5 267
12 14 (350) 12 x 1 344 753 225.9 451.8 664 199.2 398.4
13 16 (400) 16 x 1 344 753 225.9 451.8 664 199.2 398.4
14 18 (450) 16 x 1-1/8 344 1072 321.6 643.2 946 283.8 567.6
15 20 (500) 20 x 1-1/8 344 1072 321.6 643.2 946 283.8 567.6
16 24 (600) 20 x 1-1/4 344 1470 441 882 1297 389.1 778.2
17 26 (650) 24 x 1-1/4 344 1470 441 882 1297 389.1 778.2
18 28 (700) 28 x 1-1/4 344 1470 441 882 1297 389.1 778.2
19 30 (750) 28 x 1-1/4 344 1470 441 882 1297 389.1 778.2
20 32 (800) 28 x 1-1/2 344 2540 762 1524 2241 672.3 1344.6
21 34 (850) 32 x 1-1/2 344 2540 762 1524 2241 672.3 1344.6
22 36 (900) 32 x 1-1/2 344 2540 762 1524 2241 672.3 1344.6
23 38 (950) 32 x 1-1/2 344 2540 762 1524 2241 672.3 1344.6
24 40 (1000) 36 x 1-1/2 344 2540 762 1524 2241 672.3 1344.6
25 42 (1050) 36 x 1-1/2 344 2540 762 1524 2241 672.3 1344.6
26 44 (1100) 40 x 1-1/2 344 2540 762 1524 2241 672.3 1344.6
27 46 (1150) 40 x 1-1/2 344 2540 762 1524 2241 672.3 1344.6
28 48 (1200) 44 x 1-1/2 344 2540 762 1524 2241 672.3 1344.6
29 50 (1250) 44 x 1-3/4 344 4034 1210.2 2420.4 3559 1067.7 2135.4
30 52 (1300) 44 x 1-3/4 344 4034 1210.2 2420.4 3559 1067.7 2135.4
31 54 (1350) 44 x 1-3/4 344 4034 1210.2 2420.4 3559 1067.7 2135.4
32 56 (1400) 48 x 1-3/4 344 4034 1210.2 2420.4 3559 1067.7 2135.4
33 58 (1450) 48 x 1-3/4 344 4034 1210.2 2420.4 3559 1067.7 2135.4
34 60 (1500) 52 x 1-3/4 344 4034 1210.2 2420.4 3559 1067.7 2135.4
Notes.
1 The torque values for stage - wise tightening @ 30% & 60%, refer to section 9.5.4. 2.
2 In case of the non standard flanges (those designed as per ASME VIII, Div. 1, app. 2 or any other standards for which the design is
validated, or the standard flanges whose operating temperature is beyond 450 deg. C), the torque values will be custom calculated
or validated. Refer table series - B for such cases.
3 The torque values are based on SP - 2020.
Page 1 of 13.
Annexure - 4 to KHF 00 - 101983 BA 6070 03014 0000.
Table A150. 2, Torque values for Class 150, ASME B16.5, and ASME B16.47 Series A.
Flange Rating Class 150, ASME B16.5, and ASME B16.47 Series A.
Bolting Materials ASTM A193 Gr. B7M, ASTM A320 Gr. L7M.
Max. Temperature. 400 deg.C.
Sl. No. Flange Size Bolting Limited Bolt Torque for Bolt. Torque for Coated Bolt. Remarks.
NPS (DN) No. x Dia. Stress (Mpa). Molykote 1000/ eqvt. (Nm).
( = 0.17).
(Nm).
100%. 30%. 60%. 100%. 30%. 60%.
(Note - (Note - (Note - (Note -
1 1/2 (15) 4 x 1/2 276 75 22.5 45 67 20.1 40.2
2 3/4 (20) 4 x 1/2 276 75 22.5 45 67 20.1 40.2
3 1 (25) 4 x 1/2 276 75 22.5 45 67 20.1 40.2
4 1-1/2 (40) 4 x 1/2 276 75 22.5 45 67 20.1 40.2
5 2 (50) 4 x 5/8 276 147 44.1 88.2 130 39 78
6 3 (80) 4 x 5/8 276 147 44.1 88.2 130 39 78
7 4 (100) 8 x 5/8 276 147 44.1 88.2 130 39 78
8 6 (150) 8 x 3/4 276 255 76.5 153 225 67.5 135
9 8 (200) 8 x 3/4 276 255 76.5 153 225 67.5 135
10 10 (250) 12 x 7/8 276 405 121.5 243 357 107.1 214.2
11 12 (300) 12 x 7/8 276 405 121.5 243 357 107.1 214.2
12 14 (350) 12 x 1 276 604 181.2 362.4 533 159.9 319.8
13 16 (400) 16 x 1 276 604 181.2 362.4 533 159.9 319.8
14 18 (450) 16 x 1-1/8 276 860 258 516 759 227.7 455.4
15 20 (500) 20 x 1-1/8 276 860 258 516 759 227.7 455.4
16 24 (600) 20 x 1-1/4 276 1179 353.7 707.4 1041 312.3 624.6
17 26 (650) 24 x 1-1/4 276 1179 353.7 707.4 1041 312.3 624.6
18 28 (700) 28 x 1-1/4 276 1179 353.7 707.4 1041 312.3 624.6
19 30 (750) 28 x 1-1/4 276 1179 353.7 707.4 1041 312.3 624.6
20 32 (800) 28 x 1-1/2 276 2038 611.4 1222.8 1798 539.4 1078.8
21 34 (850) 32 x 1-1/2 276 2038 611.4 1222.8 1798 539.4 1078.8
22 36 (900) 32 x 1-1/2 276 2038 611.4 1222.8 1798 539.4 1078.8
23 38 (950) 32 x 1-1/2 276 2038 611.4 1222.8 1798 539.4 1078.8
24 40 (1000) 36 x 1-1/2 276 2038 611.4 1222.8 1798 539.4 1078.8
25 42 (1050) 36 x 1-1/2 276 2038 611.4 1222.8 1798 539.4 1078.8
26 44 (1100) 40 x 1-1/2 276 2038 611.4 1222.8 1798 539.4 1078.8
27 46 (1150) 40 x 1-1/2 276 2038 611.4 1222.8 1798 539.4 1078.8
28 48 (1200) 44 x 1-1/2 276 2038 611.4 1222.8 1798 539.4 1078.8
29 50 (1250) 44 x 1-3/4 276 3236 970.8 1941.6 2856 856.8 1713.6
30 52 (1300) 44 x 1-3/4 276 3236 970.8 1941.6 2856 856.8 1713.6
31 54 (1350) 44 x 1-3/4 276 3236 970.8 1941.6 2856 856.8 1713.6
32 56 (1400) 48 x 1-3/4 276 3236 970.8 1941.6 2856 856.8 1713.6
33 58 (1450) 48 x 1-3/4 276 3236 970.8 1941.6 2856 856.8 1713.6
34 60 (1500) 52 x 1-3/4 276 3236 970.8 1941.6 2856 856.8 1713.6
Notes.
1 The torque values for stage - wise tightening @ 30% & 60%, refer to section 9.5.4. 2.
2 In case of the non standard flanges (those designed as per ASME VIII, Div. 1, app. 2 or any other standards for which the design is
validated, or the standard flanges whose operating temperature is beyond 450 deg. C), the torque values will be custom calculated
or validated. Refer table series - B for such cases.
3 The torque values are based on SP - 2020.
Page 2 of 13.
Annexure - 4 to KHF 00 - 101983 BA 6070 03014 0000.
The
Table A150. 3, Torque values for tabulated
Class torque
150, ASME B16.5. values for each flange ratings/ sizes.
Sl. No. Flange Size Bolting Limited Bolt Torque for Bolt. Torque for Coated Bolt. Remarks.
NPS (DN) No. x Dia. Stress (Mpa). Molykote 1000/ eqvt. (Nm).
( = 0.17).
(Nm).
100%. 30%. 60%. 100%. 30%. 60%.
(Note - (Note - (Note - (Note -
1 1/2 (15) 4 x 1/2 304 83 24.9 49.8 83 24.9 49.8
2 3/4 (20) 4 x 1/2 304 83 24.9 49.8 83 24.9 49.8
3 1 (25) 4 x 1/2 304 83 24.9 49.8 83 24.9 49.8
4 1-1/2 (40) 4 x 1/2 304 83 24.9 49.8 83 24.9 49.8
5 2 (50) 4 x 5/8 304 162 48.6 97.2 162 48.6 97.2
6 3 (80) 4 x 5/8 304 162 48.6 97.2 162 48.6 97.2
7 4 (100) 8 x 5/8 304 162 48.6 97.2 162 48.6 97.2
8 6 (150) 8 x 3/4 276 281 84.3 168.6 281 84.3 168.6
Notes.
1 The torque values for stage - wise tightening @ 30% & 60%, refer to section 9.5.4. 2.
2 In case of the non standard flanges (those designed as per ASME VIII, Div. 1, app. 2 or any other standards for which the design is
validated, or the standard flanges whose operating temperature is beyond 450 deg. C), the torque values will be custom calculated
or validated. Refer table series - B for such cases.
3 The torque values are based on SP - 2020.
Table A300. 1, Torque values for Class 300, ASME B16.5 and ASME B16.47 Series A.
Page 3 of 13.
Annexure - 4 to KHF 00 - 101983 BA 6070 03014 0000.
Flange Rating Class 300, ASME B16.5 and ASME B16.47 Series A.
Bolting Materials ASTM A193 Gr. B7/ B16, ASTM A320 Gr. L7/ L43.
Max. Temperature. 350 deg.C.
Sl. No. Flange Size Bolting Limited Bolt Torque for Bolt. Torque for Coated Bolt. Remarks.
NPS (DN) No. x Dia. Stress (Mpa). Molykote 1000/ eqvt. (Nm).
( = 0.17).
(Nm).
100%. 30%. 60%. 100%. 30%. 60%.
(Note - (Note - (Note - (Note -
1 1/2 (15) 4 x 1/2 344 94 28.2 56.4 83 24.9 49.8
2 3/4 (20) 4 x 5/8 344 184 55.2 110.4 162 48.6 97.2
3 1 (25) 4 x 5/8 344 184 55.2 110.4 162 48.6 97.2
4 1-1/2 (40) 4 x 3/4 344 318 95.4 190.8 280 84 168
5 2 (50) 8 x 5/8 344 184 55.2 110.4 162 48.6 97.2
6 3 (80) 8 x 3/4 344 318 95.4 190.8 280 84 168
7 4 (100) 8 x 3/4 344 318 95.4 190.8 280 84 168
8 6 (150) 12 x 3/4 344 318 95.4 190.8 280 84 168
9 8 (200) 12 x 7/8 344 504 151.2 302.4 445 133.5 267
10 10 (250) 16 x 1 344 753 225.9 451.8 664 199.2 398.4
11 12 (300) 16 x 1-1/8 344 1072 321.6 643.2 946 283.8 567.6
12 14 (350) 20 x 1-1/8 344 1072 321.6 643.2 946 283.8 567.6
13 16 (400) 20 x 1-1/4 344 1470 441 882 1297 389.1 778.2
14 18 (450) 24 x 1-1/4 344 1470 441 882 1297 389.1 778.2
15 20 (500) 24 x 1-1/4 344 1470 441 882 1297 389.1 778.2
16 24 (600) 24 x 1-1/2 344 2540 762 1524 2241 672.3 1344.6
17 26 (650) 28 x 1-5/8 344 3230 969 1938 2850 855 1710
18 28 (700) 28 x 1-5/8 344 3230 969 1938 2850 855 1710
19 30 (750) 28 x 1-3/4 344 4034 1210.2 2420.4 3559 1067.7 2135.4
20 32 (800) 28 x 1-7/8 344 4961 1488.3 2976.6 4378 1313.4 2626.8
21 34 (850) 28 x 1-7/8 344 4961 1488.3 2976.6 4378 1313.4 2626.8
22 36 (900) 32 x 2 344 6021 1806.3 3612.6 5313 1593.9 3187.8
23 38 (950) 32 x 1-1/2 344 2540 762 1524 2241 672.3 1344.6
24 40 (1000) 32 x 1-5/8 344 3230 969 1938 2850 855 1710
25 42 (1050) 32 x 1 58 344 3230 969 1938 2850 855 1710
26 44 (1100) 32 x 1-3/4 344 4034 1210.2 2420.4 3559 1067.7 2135.4
27 46 (1150) 28 x 1-78 344 4961 1488.3 2976.6 4378 1313.4 2626.8
28 48 (1200) 32 x 1-78 344 4961 1488.3 2976.6 4378 1313.4 2626.8
29 50 (1250) 32 x 2 By hydraulic bolt tensioning
30 52 (1300) 32 x 2 By hydraulic bolt tensioning
31 54 (1350) 28 x 2-1/4 By hydraulic bolt tensioning
32 56 (1400) 28 x 2-1/4 By hydraulic bolt tensioning
33 58 (1450) 32 x 2-1/4 By hydraulic bolt tensioning
34 60 (1500) 32 x 2-1/4 By hydraulic bolt tensioning
Notes.
1 The torque values for stage - wise tightening @ 30% & 60%, refer to section 9.5.4. 2.
2 In case of the non standard flanges (those designed as per ASME VIII, Div. 1, app. 2 or any other standards for which the design is
validated, or the standard flanges whose operating temperature is beyond 450 deg. C), the torque values will be custom calculated
or validated. Refer table series - B for such cases.
3 The torque values are based on SP - 2020.
Table 300. 2, Torque values for Class 300, ASME B16.5, and ASME B16.47 Series A.
Page 4 of 13.
Annexure - 4 to KHF 00 - 101983 BA 6070 03014 0000.
Sl. No. Flange Size Bolting Limited Bolt Torque for Bolt. Torque for Coated Bolt. Remarks.
NPS (DN) No. x Dia. Stress (Mpa). Molykote 1000/ eqvt. (Nm).
( = 0.17).
(Nm).
100%. 30%. 60%. 100%. 30%. 60%.
(Note - (Note - (Note - (Note -
1 1/2 (15) 4 x 1/2 276 75 22.5 45 67 20.1 40.2
2 3/4 (20) 4 x 5/8 276 147 44.1 88.2 130 39 78
3 1 (25) 4 x 5/8 276 147 44.1 88.2 130 39 78
4 1-1/2 (40) 4 x 3/4 276 255 76.5 153 225 67.5 135
5 2 (50) 8 x 5/8 276 147 44.1 88.2 130 39 78
6 3 (80) 8 x 3/4 276 255 76.5 153 225 67.5 135
7 4 (100) 8 x 3/4 276 255 76.5 153 225 67.5 135
8 6 (150) 12 x 3/4 276 255 76.5 153 225 67.5 135
9 8 (200) 12 x 7/8 276 405 121.5 243 357 107.1 214.2
10 10 (250) 16 x 1 276 604 181.2 362.4 533 159.9 319.8
11 12 (300) 16 x 1-1/8 276 860 258 516 759 227.7 455.4
12 14 (350) 20 x 1-1/8 276 860 258 516 759 227.7 455.4
13 16 (400) 20 x 1-1/4 276 1179 353.7 707.4 1041 312.3 624.6
14 18 (450) 24 x 1-1/4 276 1179 353.7 707.4 1041 312.3 624.6
15 20 (500) 24 x 1-1/4 276 1179 353.7 707.4 1041 312.3 624.6
16 24 (600) 24 x 1-1/2 276 2038 611.4 1222.8 1798 539.4 1078.8
17 26 (650) 28 x 1-5/8 276 2591 777.3 1554.6 2286 685.8 1371.6
18 28 (700) 28 x 1-5/8 276 2591 777.3 1554.6 2286 685.8 1371.6
19 30 (750) 28 x 1-3/4 276 3236 970.8 1941.6 2856 856.8 1713.6
20 32 (800) 28 x 1-7/8 276 3981 1194.3 2388.6 3512 1053.6 2107.2
21 34 (850) 28 x 1-7/8 276 3981 1194.3 2388.6 3512 1053.6 2107.2
22 36 (900) 32 x 2 276 4831 1449.3 2898.6 4263 1278.9 2557.8
23 38 (950) 32 x 1-1/2 276 2038 611.4 1222.8 1798 539.4 1078.8
24 40 (1000) 32 x 1-5/8 276 2591 777.3 1554.6 2286 685.8 1371.6
25 42 (1050) 32 x 1 58 276 2591 777.3 1554.6 2286 685.8 1371.6
26 44 (1100) 32 x 1-3/4 276 3236 970.8 1941.6 2856 856.8 1713.6
27 46 (1150) 28 x 1-78 276 3981 1194.3 2388.6 3512 1053.6 2107.2
28 48 (1200) 32 x 1-78 276 3981 1194.3 2388.6 3512 1053.6 2107.2
29 50 (1250) 32 x 2 By hydraulic bolt tensioning.
30 52 (1300) 32 x 2 By hydraulic bolt tensioning.
31 54 (1350) 28 x 2-1/4 By hydraulic bolt tensioning.
32 56 (1400) 28 x 2-1/4 By hydraulic bolt tensioning.
33 58 (1450) 32 x 2-1/4 By hydraulic bolt tensioning.
34 60 (1500) 32 x 2-1/4 By hydraulic bolt tensioning.
Notes.
1 The torque values for stage - wise tightening @ 30% & 60%, refer to section 9.5.4. 2.
2 In case of the non standard flanges (those designed as per ASME VIII, Div. 1, app. 2 or any other standards for which the design is
validated, or the standard flanges whose operating temperature is beyond 450 deg. C), the torque values will be custom calculated
or validated. Refer table series - B for such cases.
3 The torque values are based on SP - 2020.
Table 600. 1, Torque values for Class 600, ASME B16.5 and ASME B16.47 Series A.
Page 5 of 13.
Annexure - 4 to KHF 00 - 101983 BA 6070 03014 0000.
Sl. No. Flange Size Bolting Limited Bolt Torque for Bolt. Torque for Coated Bolt. Remarks.
NPS (DN) No. x Dia. Stress (Mpa). Molykote 1000/ eqvt. (Nm).
( = 0.17).
(Nm).
100%. 30%. 60%. 100%. 30%. 60%.
(Note - (Note - (Note - (Note -
1 1/2 (15) 4 x 1/2 344
2 3/4 (20) 4 x 5/8 344
3 1 (25) 4 x 5/8 344
4 1-1/2 (40) 4 x 3/4 344
5 2 (50) 8 x 5/8 344
6 3 (80) 8 x 3/4 344
7 4 (100) 8 x 7/8 344
8 6 (150) 12 x 1 344
9 8 (200) 12 x 1-1/8 344
10 10 (250) 16 x 1-1/4 344
11 12 (300) 20 x 1-1/4 344
12 14 (350) 20 x 1- 3/8 344
13 16 (400) 20 x 1-1/2 344
14 18 (450) 20 x 1-5/8 344
15 20 (500) 24 x 1-5/8 344
16 24 (600) 24 x 1-7/8 344
17 26 (650) 28 x 1-7/8 344
18 28 (700) 28 x 2 By hydraulic bolt tensioning.
19 30 (750) 28 x 2 By hydraulic bolt tensioning.
20 32 (800) 28 x 2-1/4 By hydraulic bolt tensioning.
21 34 (850) 28 x 2-1/4 By hydraulic bolt tensioning.
22 36 (900) 28 x 2-1/2 By hydraulic bolt tensioning.
23 38 (950) 28 x 2-1/4 By hydraulic bolt tensioning.
24 40 (1000) 32 x 2-1/4 By hydraulic bolt tensioning.
25 42 (1050) 28 x 2 12 By hydraulic bolt tensioning.
26 44 (1100) 32 x 2-1/2 By hydraulic bolt tensioning.
27 46 (1150) 32 x 2-1/2 By hydraulic bolt tensioning.
28 48 (1200) (Note - 4). 32 x 2-3/4 By hydraulic bolt tensioning.
29 50 (1250) (Note - 4). 28 x 3 By hydraulic bolt tensioning.
30 52 (1300) (Note - 4). 32 x 3 By hydraulic bolt tensioning.
31 54 (1350) (Note - 4). 32 x 3 By hydraulic bolt tensioning.
32 56 (1400) (Note - 4). 32 x 3-1/4 By hydraulic bolt tensioning.
33 58 (1450) (Note - 4). 32 x 3-1/4 By hydraulic bolt tensioning.
34 60 (1500) (Note - 4). 28 x 3-1/2 By hydraulic bolt tensioning.
Notes.
1 The torque values for stage - wise tightening @ 30% & 60%, refer to section 9.5.4. 2.
2 In case of the non standard flanges (those designed as per ASME VIII, Div. 1, app. 2 or any other standards for which the design is
validated, or the standard flanges whose operating temperature is beyond 450 deg. C), the torque values will be custom calculated
or validated. Refer table series - B for such cases.
3 The torque values are based on SP - 2020.
4 Use of ASTM A320 grade L7 is restricted to bolt dia 2-1/2 as per DEP 31.38.01.11.
Page 6 of 13.
Annexure - 4 to KHF 00 - 101983 BA 6070 03014 0000.
Table D.3.2
Flange Rating Class
600,
Bolting Materials ASTM A193 Gr. B7M, ASTM A320 Gr. L7M
Max. 400
Temperature deg.C
Flange Size Bolting
NPS (DN)
Flange Size No. x
NPS (DN)
BoltingNo. x Dia.
1/2 (15) 4 x 1/2
3/4 (20) 4 x 5/8
1 (25) 4 x 5/8
1-1/2 (40) 4 x 3/4
2 (50) 8 x 5/8
3 (80) 8 x 3/4
4 (100) 8 x 7/8
6 (150) 12 x 1
8 (200) 12 x 1-1/8
10 (250) 16 x 1-1/4
12 (300) 20 x 1-1/4
14 (350) 20 x 1- 3/8
Page 7 of 13.
Annexure - 4 to KHF 00 - 101983 BA 6070 03014 0000.
16 (400) The tabulated torque values for each flange ratings/ sizes.
20 x 1-1/2
18 (450) 20 x 1-5/8
20 (500) 24 x 1-5/8
24 (600) 24 x 1-7/8
26 (650) 28 x 1-7/8
28 (700) 28 x 2
30 (750) 28 x 2
32 (800) 28 x 2-1/4
34 (850) 28 x 2-1/4
36 (900) 28 x 2-1/2
38 (950) 28 x 2-1/4
40 (1000) 32 x 2-1/4
42 (1050) 28 x 2 12
44 (1100) 32 x 2-1/2
46 (1150) 32 x 2-1/2
48 (1200) 32 x 2-3/4
50 (1250) 28 x 3
52 (1300) 32 x 3
54 (1350) 32 x 3
56 (1400) 32 x 3-1/4
58 (1450) 32 x 3-1/4
60 (1500) 28 x 3-1/2
Page 36
The controlled version of this CMF Document resides online in Livelink. Printed copies are UNCONTROLLED.
Page 37
The controlled version of this CMF Document resides online in Livelink. Printed copies are UNCONTROLLED.
Table D.4.1
Flange Rating Class 900, ASME B16.5 and ASME B16.47 Series A
Bolting Materials ASTM A193 Gr. B7/ B16, ASTM A320 Gr. L7/ L43
Max. 350
Temperature deg.
Flange Size C
Bolt
NPS (DN)
Flange Size Bolting ing
NPS (DN) No. x Dia.
Page 8 of 13.
Annexure - 4 to KHF 00 - 101983 BA 6070 03014 0000.
The
The controlled version of thistabulated torque
CMF Document values
resides online for each flange
in Livelink. Printedratings/
copies are sizes.
UNCONTROLLED.
Table D.4.2
Flange Rating Class 900, ASME B16.5, and ASME B16.47 Series A
Bolting Materials ASTM A193 Gr. B7M, ASTM A320 Gr. L7M
Max. 400
Temperature deg.
Flange Size C
Bolt
NPS (DN)
Flange Size Bolting ing
NPS (DN) No. x Dia.
1/2 (15)
3/4 (20)
1 (25)
1-1/2 (40)
2 (50)
3 (80)
4 (100)
6 (150)
8 (200)
10 (250)
12 (300)
14 (350)
Page 9 of 13.
Annexure - 4 to KHF 00 - 101983 BA 6070 03014 0000.
16 (400) The tabulated torque values for each flange ratings/ sizes.
18 (450) (Note1)
20 (500) (Note1)
24 (600) (Note1)
Page 41
The controlled version of this CMF Document resides online in Livelink. Printed copies are UNCONTROLLED.
Table D.5.2
Flange Rating Class 1500, ASME B16.5
Bolting Materials ASTM A193 Gr. B7M, ASTM A320 Gr. L7M
Max. 400
Temperature deg.
Flange Size C
Bolt
NPS (DN)
Flange Size Bolting ing
NPS (DN) No. x Dia.
Page 10 of 13.
Annexure - 4 to KHF 00 - 101983 BA 6070 03014 0000.
1-13/16 8 x 3/4
2-1/16 8 x 3/4
2-9/16 8 x 7/8
3-1/16 8 x 1
4-1/16 8 x 1-1/8
5-1/8 12 x 1-1/8
7-1/16 12 x 1-1/2
9 16 x 1-1/2
11 16 x 1-3/4
13-5/8 20 x 1-7/8
16-3/4 24 x 1-7/8
18-3/4 24 x 2-1/4
21-1/4 24 x 2-1/2
Page 47
The controlled version of this CMF Document resides online in Livelink. Printed copies are UNCONTROLLED.
Table D.7.2
Flange Rating API 6A 10000 PSI
Bolting Materials ASTM A193 Gr. B7M and ASTM A320 Gr. L7M
Max. 400
Temperature deg.
Nominal size C
Bolt
&
Nominal size ing
Bolt
& ing
Bore of Flange No.
x
Dia.
1-13/16 8 x 3/4
2-1/16 8 x 3/4
2-9/16 8 x 7/8
3-1/16 8 x 1
4-1/16 8 x 1-1/8
5-1/8 12 x 1-1/8
7-1/16 12 x 1-1/2
9 16 x 1-1/2
11 16 x 1-3/4
13-5/8 20 x 1-7/8
16-3/4 24 x 1-7/8
Page 11 of 13.
Annexure - 4 to KHF 00 - 101983 BA 6070 03014 0000.
Page 12 of 13.
Annexure - 4 to KHF 00 - 101983 BA 6070 03014 0000.
Page 13 of 13.