Sie sind auf Seite 1von 28

CSFB FROM LTE WITH DMCR &

Without DMCR

Abhijeet Kumar NAK 2014 - PRESENTATION TITLE - DEPARTMENT AUTHOR - 2014-04-26


1. Introduction

CSFB subscribers roam with preference on LTE access, no CS-voice service available (only
PS based services)
Fallback triggered to overlapping CS domain whenever voice services are requested and
resumed LTE access for PS services after call completion.
CSFB is enhanced with support for DMCR to decrease the call set up time. If
the DMCR capability is on and the DMCR is activated in SIB3 then the UE is allowed to send
message on RACH or act on received message on FACH before complete reading of
SIB11/SIB12/SIB19.
The feature Deferred Measurement Control Reading provides faster call setup time
for CS Fallback from LTE with release with redirect.

1. Purpose
This instruction is used for the CSFB From LTE with DMCR (FAJ 121 1610 ) activation
procedure by MOS Script on software level W12B in RNC side.

Abhijeet Kumar NAK 2014 - PRESENTATION TITLE - DEPARTMENT AUTHOR - 2014-04-26 2


DMCR Feature

The following Feature/parameter

Node Mo Parameter Required

RNC RncFeature CsFallbackLte 1

RNC UtranCell dmcrEnabled 1

Abhijeet Kumar NAK 2014 - PRESENTATION TITLE - DEPARTMENT AUTHOR - 2014-04-26 3


Parameter at RNC

Node Mo Parameter New

RNC Rnc Feature LteCellReselection.featureState 1 (Activate)

RNC Sid schedulingBlockEnabled 1


RNC Sid sib19.sib19RepPeriod 256

RNC UtranCell AbsPrioCellRes.cellReselectionPriority 2

RNC Sid SIB11 12


RNC Sid sib5RepPeriod 32
RNC RncFunction loadSharingRrcEnabled TRUE
RNC UtranRelation loadSharingCandidate define
RNC UtranRelation loadSharingThreshold 0
RNC UtranCell interFreqFddMeasIndicator 0

Abhijeet Kumar NAK 2014 - PRESENTATION TITLE - DEPARTMENT AUTHOR - 2014-04-26 4


1.CSFB triggered UE release to WDCMA while user is Idle Mode due to inactivity - Mobile
originating without DMCR.

DESCRIPTION
CS fallback triggered UE release to WCDMA - Idle Mode.
1.PRECONDITION
Enable licence key file CsFallbackLte (CXC 403 0106) in the RNC
The timer on the eNodeB to control user inactivity is tInactivity Timer which is set to 10 sec. UE performs the
normal attach and goes into idle state due to user inactivity.
set rcs tinactivitytimer 10
The deactivation of DMCR feature done at the Utrancell level.
set Utrancell=x dmcrenabled 0

1.TEST INSTRUCTION
Action: Attach relevant WCDMA UE and LTE UE.
Action: Make LTE UE IDLE Mode
Action: Make call from WCDMA UE to LTE UE

Abhijeet Kumar NAK 2014 - PRESENTATION TITLE - DEPARTMENT AUTHOR - 2014-04-26 5


CSFB Procedure

Abhijeet Kumar NAK 2014 - PRESENTATION TITLE - DEPARTMENT AUTHOR - 2014-04-26 6


Abhijeet Kumar NAK 2014 - PRESENTATION TITLE - DEPARTMENT AUTHOR - 2014-04-26 7
Abhijeet Kumar NAK 2014 - PRESENTATION TITLE - DEPARTMENT AUTHOR - 2014-04-26 8
Abhijeet Kumar NAK 2014 - PRESENTATION TITLE - DEPARTMENT AUTHOR - 2014-04-26 9
CSFB Delay

CSFB call setup time standards

MTExtend service request To Alerting.

Delay 2.2 s from extended service request to CC Alerting


Delay 3.6 s from CC alerting to CC connect.
Total CSFB time is 5.8 s

Abhijeet Kumar NAK 2014 - PRESENTATION TITLE - DEPARTMENT AUTHOR - 2014-04-26 10


CSFB triggered UE release to WDCMA while user is Idle Mode due to inactivity - Mobile
originating with DMCR

1.DESCRIPTION
1.Verify the gain of 1 second in CS call setup using CSFB with DMCR in WCDMA/LTE test environment.
2.PRECONDITION
.
Enable licence key file CsFallbackLte (CXC 403 0106) in the RNC
The timer on the eNodeB to control user inactivity is tInactivity Timer which is set to 10 sec. UE performs the normal attach and goes into idle
state due to user inactivity
The activation of DMCR feature done at the Utrancell level.
set Utrancell=x dmcrenabled 1
We should see SIB3 message to notify about feature activation

1.TEST INSTRUCTION
Action: Attach relevant WCDMA UE and LTE UE.
Action: Make LTE UE IDLE mode
Action: Make call from WCDMA UE to LTE UE

Abhijeet Kumar NAK 2014 - PRESENTATION TITLE - DEPARTMENT AUTHOR - 2014-04-26 11


Abhijeet Kumar NAK 2014 - PRESENTATION TITLE - DEPARTMENT AUTHOR - 2014-04-26 12
Abhijeet Kumar NAK 2014 - PRESENTATION TITLE - DEPARTMENT AUTHOR - 2014-04-26 13
CSFB Delay

CSFB call setup time standards

MTExtend service request To Alerting.

Delay 2.6 s from extended service request to CC Alerting


Delay 3.9 s from CC alerting to CC connect.
Total CSFB time is 6.5 s

Abhijeet Kumar NAK 2014 - PRESENTATION TITLE - DEPARTMENT AUTHOR - 2014-04-26 14


TC-3 CSFB triggered UE release to WDCMA while PS call is happening - Mobile originating without DMCR.

DESCRIPTION
While PS call on LTE UE, CS fallback triggered UE release to WCDMA.
PRECONDITION

Enable licence key file CsFallbackLte (CXC 403 0106) in the RNC
The deactivation of DMCR feature done at the Utrancell level.
set Utrancell=x dmcrenabled 0

Action: Attach relevant WCDMA UE and LTE UE.


Action: Make PS call on LTE UE
Action: Make call from WCDMA UE to LTE UE

Abhijeet Kumar NAK 2014 - PRESENTATION TITLE - DEPARTMENT AUTHOR - 2014-04-26 15


CSFB Procedure

1.MT CSFB call attempt with extend service request.


The UTRAN frequency is included
Abhijeet in RRC
Kumar NAK 2014 Connection Release
- PRESENTATION TITLE - message.
DEPARTMENT AUTHOR - 2014-04-26 16
CSFB Procedure

2. Routing Area Update


Abhijeet Kumar NAK 2014 - PRESENTATION TITLE - DEPARTMENT AUTHOR - 2014-04-26 17
3. Authentication, call proceeding and radio bearer setup.

Abhijeet Kumar NAK 2014 - PRESENTATION TITLE - DEPARTMENT AUTHOR - 2014-04-26 18


. Call alerting and setup success
Abhijeet Kumar NAK 2014 - PRESENTATION TITLE - DEPARTMENT AUTHOR - 2014-04-26 19
2nd call from WCDMA UE to LTE UE in PS mode

CSFB Time : 6.4 S

Abhijeet Kumar NAK 2014 - PRESENTATION TITLE - DEPARTMENT AUTHOR - 2014-04-26 20


CSFB Delay

CSFB call setup time standards

MTExtend service request To Alerting.

Delay 2.6 s from extended service request to CC Alerting


Delay 3.8 s from CC alerting to CC connect.
Total CSFB time is 6.4 s

Abhijeet Kumar NAK 2014 - PRESENTATION TITLE - DEPARTMENT AUTHOR - 2014-04-26 21


1.CSFB triggered UE release to WDCMA while PS call is happening - Mobile originating with DMCR.

1.Verify the gain of 1 second in CS call setup using CSFB with DMCR in WCDMA/LTE test
environment.
2.PRECONDITION
Ensure that the preconditions as tested in 3.1 are followed for the appropriate frequency
eNodeB/eUtranCell being tested.
Enable licence key file CsFallbackLte (CXC 403 0106) in the RNC
The activation of DMCR feature done at the Utrancell level.
set Utrancell=x dmcrenabled 1

Action: Attach relevant WCDMA UE and LTE UE.


Action: Make PS call on LTE UE
Action: Make call from WCDMA UE to LTE UE

Abhijeet Kumar NAK 2014 - PRESENTATION TITLE - DEPARTMENT AUTHOR - 2014-04-26 22


Abhijeet Kumar NAK 2014 - PRESENTATION TITLE - DEPARTMENT AUTHOR - 2014-04-26 23
Abhijeet Kumar NAK 2014 - PRESENTATION TITLE - DEPARTMENT AUTHOR - 2014-04-26 24
Abhijeet Kumar NAK 2014 - PRESENTATION TITLE - DEPARTMENT AUTHOR - 2014-04-26 25
CSFB Delay

CSFB call setup time standards

MTExtend service request To Alerting.

Delay 2.47 s from extended service request to CC Alerting


Delay 3.23 s from CC alerting to CC connect.
Total CSFB time is 5.7 s

Abhijeet Kumar NAK 2014 - PRESENTATION TITLE - DEPARTMENT AUTHOR - 2014-04-26 26


Result

IDLE: DMCE Disabled total CSFB time 5.8 s

IDLE : DMCR enabled Total CSFB time 6.5 s

PS: DMCR disabled Total CSFB time 6.4

PS: DMCR enabled Total CSFB time 5.7 s

Abhijeet Kumar NAK 2014 - PRESENTATION TITLE - DEPARTMENT AUTHOR - 2014-04-26 27


THANKS

Abhijeet Kumar NAK 2014 - PRESENTATION TITLE - DEPARTMENT AUTHOR - 2014-04-26 28

Das könnte Ihnen auch gefallen