Beruflich Dokumente
Kultur Dokumente
1 The above table is prepared based on ASME Code edition 2010 addenda 2011a
2 For P3, P4 and P5 Material not required when Throat thickness is 13.00 MM or less provided recommonded preheat is applied & Min Tensile strength is less than 71 Ksi
3 Cooling rate to 649C shall be less than 56C/Hr, thereafter the cooling rate shall be fast enough to prevent embrittlement.
Prepared by
A.Ayyanar 21 March 2013 1 of 1