Beruflich Dokumente
Kultur Dokumente
CABADBARANCAMPUS
T.Curato St.,Cabadbaran City, Philippines
Tel. Nos. (085)3431020 / 281-2032
csucc.carsu.edu.ph
Part 1:
1. Mechanics
2. Statics
3. Particle
4. Rigid bodies
5. Concentrated force
6. Scalar
7. Vector
8. Free Body Diagram
Part 2:
1. Three Laws of Motion
First Law An object at rest stays at rest and an object in motion stays in motion
with the same speed and in the same direction unless there is an unbalance force acted
upon on it
Second Law The acceleration of an object as produced by a net force is directly
proportional to the magnitude of the net force, in the same direction as the net force,
and inversely proportional to the mass of the object.
Third Law in every interaction, there is a pair of forces acting on the two
interacting objects. The size of the forces on the first object equals the size of the force
on the second object. The direction of the force on the first object is opposite to the
direction of the force on the second object. Forces always come in pairs - equal and
opposite action-reaction force pairs.
2. Equilibrium
- State of stable conditions in which all significant factors remain more or less constant
over a period, and there is little or no inherent tendency for change. For example, a
market is said to be in equilibrium if the amount of goods that buyers wish to buy at the
current price is matched by the amount the sellers want to sell at that price. Also called
steady state.
Part 3:
1.) Determine the magnitude of the resultant force and its direction
measured counterclockwise from the positive x axis. (10 points)
S1 = 22 + 1.52
S1 = 2.5 m
S2 = 22 + 22
S2 = 22 m
F = sk
= (22 - 2.5)(100)
F = 32.84 N
= tan (22)
= 450
Fy = 0
Let:
W = weight of a cylinder
2(32.84)(sin45) - 2W = 0
W = 23.22 N
M = 2.37 kg
3.) Determine the maximum mass of the crate so that the tension developed
in any cable does not exceeded 3 kN. (15 points)
FAB = FAB i
FAC = -FAC j
W = [-m(9.81)k]
Since,
F = 0
FAB + FAC + FAD - W = 0
2 2 1
FABi + (-FACj) + (- 3 FADi + 3FADj + + 3FADk) + [-m(9.81)k]
2 2 1
(FAB - 3FAD)i + (-FAC + 3FAD) + (3FAD - 9.81m)k
By i, j and k components:
2
FAB - 3FAD = 0
2
FAC + 3FAD = 0
1
FAD - 9.81m = 0
3
Joint C:
+Fy = 0
sin30(FCB) - 1.5 = 0
FCB = 3 kN (T)
+Fx = 0
FCD + 3(cos30) = 0
FCD = -2.6
FCD = 2.6 kN (C)
Joint D:
+Fx = 0
FDE 2 = 0
FDE = 2 kN (T)
+Fy = 0
FDB + 2.6 = 0
FDB = -2.6
FDB = 2.6 kN (C)
Joint B:
+Fy = 0
FBE(cos30) + 2(cos30) = 0
FBE = -2
FBE = 2 kN (C)
+Fx = 0
(2+2)(sin30) + 3 FBA
FDB = 5 kN (T)
5.) Determine the force in members GE, GC, and BC of the truss shown in Fig.
2. Indicate whether the members are in tension or compression. Use the
method of sections.
+Fx = 0
400 Ax = 0
Ax = 400 N
MC = 0
1200(8) + 400(3) Dy(12) = 0
Dy = 900 N
+Fy = 0
Ay -1200 +900 = 0
Ay = 300 N
At point G:
MG = 0
-300(4) 400(3) FBC(3) = 0
FBC = 800 (T)
At point C:
MC = 0
300(8) +FGE(3) = 0
FGE = -800 N
FGE = 800 N (C)
+Fy = 0
3
300 (5)FGC = 0
FGC 500 N (T)
6.) Determine the horizontal and vertical components of reaction that pins A
and B exert on the two-member frame. Set F = 500 N.
At member AC:
MA = 0
-Cx(1.5sin60) + Cy(1.5cos60) + 600(0.75) = 0
At member CB:
MB = 0
-500(1) + Cx(1) + Cy(1) = 0
Therefore:
Cx = 402.63 N
Cy = 97.37 N
At member AC:
+Fx = 0
-Ax + 600(sin60) 402.63 = 0
Ax = 117 N
+Fy = 0
Ay 600(cos60) 97.37 = 0
Ay = 397.37 N
At member CB:
+Fx = 0
402.63 500 + Bx = 0
Bx = 97.37 N
+Fy = 0
-By +97.37 = 0
By = 97.37 N
7.) The wall crane supports a load of 700 lb. Determine the horizontal and
vertical components of reaction at the pins A and D. Also, what is the force in
the cable at the winch W?
Fy = 2T - 700 = 0
T = 350 lb
Member ABC:
MA = 0
By (4) - 700(8) - 100(4) - (350sin60) (4) = 0
By = 1803.11 lb
Fy = 0
-Ay - 350sin60 -100 -700 + 1803.11 = 0
Ay = 700 lb
Fx = 0
Ax - 350cos60 - Bx + 350 - 350 = 0
Ax - Bx = 350cos60-350+350
Ax Bx= 175lbs.
Member DB:
MD = 0
-40(2) - 1803.11(4) + Bx = 0
Bx = 1823.11 lb
Fx = 0
-Dx + 1823.11 = 0
Dx + 1823.11 lb
FY = 0
Dy - 40 1803.11 = 0
Dy = 1843.11 lb
Since, Ax - Bx = 175
Ax = 175 + 1823.11
Ax = 1998.11 lb
8.) Determine the horizontal and vertical components of force at pins A and C
of the two-member frame.
Fx = fd
= (3) (600)
Fx = 1800 N
Fy = fd
= (500N/m+400N/m) (3)
= 900(3)
Fy = 2700 N
9.) Determine the force in members AB, AD, and AC of the space truss and
state if the members are in tension or compression.