Beruflich Dokumente
Kultur Dokumente
Page 1 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
CONTENTS
Page 2 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
SECTION 1:
Page 3 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
Bharat Petroleum Corporation Limited (BPCL), a MAHARATNA Company, has been one of the
leading petroleum refining and marketing company in India since its inception in 1956.
Bharat Petroleum Corporation Limited invites E-Tender Bids under two-bid system (Part-I:
Techno-Commercial Bid and Part-II: Price Bid) from eligible Bidders in complete accordance with
tender documents and its attachments as per the following details:
All prospective bidders are requested to enroll themselves in to our e-tendering platform
https://bpcleproc.in/ maintained by M/s. E-procurement Technologies Ltd, our authorized
Service Provider for E-tendering.
Upon logging in to the e-procurement website, bidders can download the bid documents
and shall thoroughly go through the same. All documents required for the bid, shall be
uploaded on the appropriate place in the E-Procurement web site, digitally signed. No
physical scanned documents need to be uploaded except those specifically indicated.
Bidders are advised to read the Instructions for participating in the electronic tenders
directly through internet (Bid Submission Manuals are available on the above mentioned e-
procurement site) and get conversant with the process of online submission of the tenders
well in time so as to submit tenders by the due date.
E-Bidding instructions are also attached along with the tender document for reference and
guidance.
(OR)
Page 4 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
JOB: Consultancy Services for Basic Design and Engineering, Development and Setting up of
Emergency Response Centres (ERC) at various locations in India
Oil & GAS Marketing Companies (OGMC’s), namely, Indian Oil Corporation Ltd (IOCL),
Hindustan Petroleum Corporation Ltd (HPCL), Bharat Petroleum Corporation Ltd (BPCL), Oil and
Natural Gas Corporation (ONGC) and GAIL (India) Limited, herein referred to as OGMCs are
Public sector National Oil Companies and intend to Engage agency / party for consultancy job to
help OGMCs set up Emergency Response Centre (ERC) at 5 (five) different locations in India at
Jaipur, Vizag, Manmad, Hazira and Dibiyapur (Near Kanpur), respectively.
The Tenders are invited by BPCL on behalf of OGMCs under two bid system, i.e.(A) Technical
Bid with all commercial terms without price bid and (B) Price Bid for engaging Consultant who
have expertise on the concept, design, development and Setting up of Emergency Response Centre
(ERC) for fighting large Petroleum fires of Oil and Gas Installations internationally.
Bidders shall submit the Bid directly and in their own name only without involving any intermediaries.
EMD
The EMD can be submitted in the form of Demand draft (DD) / Bank Guarantee (BG) / Money
Transfer (MT) and in any of the three currencies i.e. INR / USD / EURO. The details are given in
the clause 1.0 of this document.
Bidders shall also have to essentially sign an Integrity Pact (IP) for participating in this tender, as
per the proforma contained herein. The salient points to be noted in regard to IP are:
a. Proforma of Integrity Pact has been uploaded along with tender documents. Bidder shall be
required to download and print it such that it is legible. All pages of the printed copy of IP
Page 5 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
should be duly signed by the authorized signatory as specified below and witnessed.
Thereafter, that copy should be scanned and uploaded by bidder along with other bid
documents.
Bidder’s failure to upload the IP duly signed along with the bid document shall result in the bid not
being considered for further evaluation.
b. If the bidder has been disqualified from the tender process prior to the award of the contract
in accordance with the provisions of the Integrity Pact, BPCL shall be entitled to demand
and recover from Bidder, Price reduction amount by forfeiting the EMD / Performance
Guarantee as per provisions of the Integrity Pact.
c. If the contract has been terminated according to the provisions of the Integrity Pact, or if
BPCL is entitled to terminate the contract according to the provisions of the Integrity pact,
BPCL shall be entitled to demand and recover from contractor, Price reduction amount by
forfeiting the Performance Guarantee amount as per provisions of the Integrity Pact.
The NIT is an invitation to invite bidder to submit a formal proposal and commitment for
participation in the consultancy job, based on the Bid Qualification Criteria(s) and eligibility
conditions.
All documents attached with the Bid Qualification Cum Techno Commercial Bid and the price
bid shall form the part of the tender. Both the techno-commercial bid and the price bid will be
online only. Only EMD is exception to this rule, which will have to be submitted in physical
form by the due date of the tender.
All the supporting documents should be legible and duly signed, stamped and attested by the
authorized signatory, before uploading them online.
Online submission of the tender under the digital signature of the authorized signatory shall be
considered as token of having read, understood and totally accepted all the terms and conditions.
Bidder’s digital signature on the documents shall be considered as acceptance of the terms &
conditions.
1.1 The interest-free Earnest Money Deposit (EMD) of Rs 10,00,000 (Rupees Ten Lakh Only)
(to be submitted by way of crossed account payee Demand Draft drawn on any nationalized /
scheduled bank in favour of “BHARAT PETROLEUM CORPORATION LTD” payable
at Mumbai. The EMD shall be arranged prior to the due date of tender.
1.2 “Earnest Money Deposit” (EMD), wherever applicable, shall be paid separately by Demand
Draft (DD) / Banker’s Cheque drawn in favour of Bharat Petroleum Corporation Limited and
payable at Mumbai, or by electronic funds transfer or bank guarantee.
Page 6 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
1.3 The Bank Guarantee in lieu of EMD shall be furnished on non-judicial stamp paper of Rs.
500/- value and in the prescribed Performa given in the Tender Document.
1.4 Bank Guarantee (BG) shall be executed by any Scheduled Bank approved by Reserve Bank
of India as per the proforma. The BG shall remain valid for a period of six months from the
due date of opening the tender.
1.5 Bidder needs to submit an additional letter which will be obtained from the issuing bank on
its letterhead. The banks letter should be addressed to BPCL & should contain the same BG
reference which shall be enclosed along with the letter. This letter must be submitted in
original only. (Copy of this letter will not be accepted).
1.6 Original DD / Banker’s Cheque or BG (Bank Guarantee) as the case may be, towards EMD
shall be dropped in the tender box or sent by Registered Post / Courier to the following
address so as to reach on or before the due date:
Chief Procurement Officer (Refineries)
Central Procurement Organization (CPO)
Bharat Petroleum Corporation Ltd (BPCL),
Mumbai Refinery,
Mahul, Chembur,
Mumbai-400074.
The envelope containing EMD, boldly super-scribed on the outer cover –
CRFQ number / E-tender system id no.
Item description
Closing date / Time
Name of the bidder
BPCL will not be responsible for non-receipt of instrument(s) due to postal delay / loss
in transit etc.
Copy of the DD / Banker’s cheque / BG as the case may be, along with proof of
dispatch to be uploaded along with “Pre-qualification Bid”. Bids without EMD are
liable to be rejected.
1.7 EMD can be also submitted through electronic fund transfer to the Account as detailed
below;
Page 7 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
1.8 EMD of other unsuccessful bidders shall be released after issuance of FOA / LOA /
contract Order against this tender. However, in case of successful bidder the EMD shall be
released on receipt of performance bank guarantee.
1.9 Forfeiture of EMD – A tenderer who has submitted their bid shall not be permitted to alter /
amend or withdraw the bid, not withstanding that the bid(s) has / have not yet been opened /
finalized. A tenderer who purports to alter/ modify withdraw their offer after submission,
within the validity of the offer shall be liable to have their offer rejected and their EMD
forfeited / encashed.
1.10 The Earnest Money deposited by successful tenderer shall be forfeited if the successful
tenderer fails to honour the offer terms prior to ordering and Contractual terms after
issuance of FOA / LOA/ contract Order.
1.11 Offers received without scan copy of EMD (DD / BG / Bank transfer details) in the e-
tender and physically not received within the due date of tender (as indicated in the
NIT or corrigendum thereof) are liable to be rejected.
1.12 EMD shall be valid for a period of 6 (Six) Months from the due date and in compliance
with the terms provided in General Conditions of Contract (GCC) for the same. EMD
format provided in GCC shall be complied.
Foreign bidders can submit EMD in USD or Euro only. Details are as follows:
1. EMD amount (net) in USD / EURO shall be USD 16,000 (or) EURO 14,000
2. EMD shall be paid by BG or wire transfer.
3. In case of BG, the validity of BG shall be 90 days beyond the validity of the offer
for claim.
The required bank transfer charges for making wire transfer / Swift shall be borne by the
bidder.
The bidders are required to submit the details for vendor creation, for enabling to accept or
refund EMD. The Guidance note along with required Annexures are enclosed, bidders shall
submit the applicable documents accordingly.
The contract shall be divided in three phase and completion period of each phase shall be as
below:
i) Feasibility Report - 6 (Six) months from the date of issuing LOI / PO whichever
is earlier, for Site visit at 5 locations, collecting of details, study etc to complete the
report. Bidder has to visit all the locations within the 300 kms (radius) of each
ERC to collect the data for study and submit draft DFR within 4 months. Final
feasibility Report shall be submitted within 2 months. The total completion period
of DFR is 6 months. No extension will be given unless decided by OGMC
committee.
ii) After acceptance of Feasibility report, Tender preparation, evaluation,
Recommendation - 4 months.
iii) After finalization and award of work to Contractor Implementation and
Commissioning phase - 18 months
The duration of the contract shall be for a firm period as mentioned above.
Bidder (s) who qualify all of the following criteria as specified in Clause 3.1 & 3.2, are only
eligible to quote and bids of bidders who meet these criteria and submit supporting
documents as detailed in the tender shall only be accepted. Proposals submitted by bidders
who qualify as per the following criteria shall be technically and commercially evaluated by
a team consisting of officers from Oil & GAS Marketing Companies. Bidders are requested
Page 9 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
to carefully read the Bid Qualification Criteria and furnish authentic and complete
information in response.
3.1 Financial:
i) The bidder shall submit a declaration to the effect that they are not currently serving any
Holiday Listing orders issued by BPCL or MOPNG debarring them from carrying on
business dealings with the BPCL / MOPNG or serving a banning order by another Oil &
Gas PSU.
ii) The financial net worth of the bidder/vendor as per latest annual audited balance sheet
(2016-17) shall be positive.
iii) Annual turn-over: Bidder shall meet the minimum prescribed pre-qualification requirements
as follows:
The Average Annual Financial Turnover of the bidder during the last 3 years ending 31st
March / 31st December, of the previous financial year reckoned from the due date of
submission of bids, should be INR 60.2 Million for Indian bidder or USD 925,000 for
foreign bidder as per audited Balance Sheet and Profit & Loss account
For the vendors following the financial year closing at the end of June, September or
December, the last three financial years ending with the respective quarter of 2016 will be
considered.
The conversion of Turnover amount to INR in the case of foreign currency shall be done on
the basis of TT (Telegraphic Transfer) selling rates on the date of Bid opening (Bid due
date /un-priced bid opening), as available in State Bank of India, Mumbai. In case,
exchange rate is not available in State Bank of India (Mumbai) then SBI TT Selling rate on
the date previous to the date of opening of the un-priced bid shall be considered.
iv) As a proof for turnover, bidder is required to submit copy of the Audited Balance sheet
clearly highlighting the above fact. For companies based out of India, balance sheets should
be attested by the CFO / CEO or any other person who is duly authorized by the CFO /
CEO to sign such documents. Proof of such authorization should also be submitted.
Bidder shall furnish any of the following documentary evidence in support of above.
a) Purchase Order copy along with proof that supplies against the PO have been executed.
b) Purchase Order copy along with proof (Bank Certificate) indicated payment against the
PO.
c) Purchase Order copy along with Execution certificate by client with order value.
d) Any other document which fulfills the qualification criteria.
Page 10 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
3.2 Technical:
i. The Bidder shall have a minimum of 05 (Five) years and above working experience as an
International / Domestic independent consultant in Designing / Setting up of ERC in Oil
and/or Gas and/or petrochemical sectors.
ii. The bidder shall be independent from any equipment, extinguishing agent or system
supplier / integrator.
iii. The bidder shall demonstrate the following minimum pre qualification:
c. Must have been involved in significant fire accidents for post fire investigation
consultation or committee membership such as Energy institute, LAST FIRE
(large atmospheric storage tank fire), or government appointee.
(Suitable Proof to be provided).
iv. The bidder shall demonstrate experience of involvement in at least one major oil multi-tank
incident response using ERC type equipment or setting up of ERC.
(Proof to be provided in the form of acknowledgement from public authority)
v. The bidder shall have to provide a minimum of three references from Emergency Response
specialists / In-charge at corporate level within major oil companies confirming
involvement in setting up Emergency Response centre.
(Proof to be provided in the form of contact email addresses with job titles of corporate
specialists in major oil companies with international businesses who would be willing to
provide email reference of bidders work in ERC development and implementation).
Page 11 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
vi. The bidder shall list a minimum of three ERC projects meant for oil and gas installation
where they have had involvement through design, management, assessment, testing and
training and the same are functional for a period of minimum one year on the date of this
tender.
The ERC project as stated above, shall consist of specialist resources, self-sufficient to
respond and manage fire / other emergency incidents outside the normal design events such
as fires involving multiple Oil tanks or large bunded areas, Major refinery / Major
Petrochemical fires, vapour cloud explosion, major leakage at POL / Pipeline Fires and
Spills etc.
(Proof to be provided naming location and company or organization involved, without
jeopardizing client confidentiality).
vii. For the sake of clarification, the company or bidder participating in the above tender should
meet all above eligibility criteria (commercial and technical) and should confirm that the
concerned personnel involved for executing above claimed experience are presently in the
same company and would continue till the completion of the contract (or) incase claimed
experienced personnel leave the company during the contract period then personnel with
minimum equivalent qualification experience as mentioned in the clause 4.0 of Special
terms and conditions to be engaged within a month, in case of placement of contract to
them.
viii. Bidder must give an self certification that they are not having any personal / business
interest/ partnerships with any ERC equipment supplier, ERC development contractors or
agencies involved in managing ERC.
1) The successful bidder team shall deploy a project team comprising of Minimum four
members having Qualification & experience profile as given below:
2) Bidder shall submit the complete CV (along with appropriate certification of qualifications
and experience.)
Parties who are affiliates of one another can decide which Affiliate will make a bid.
Only one affiliate may submit a bid. Two or more affiliates are not permitted to
make separate bids directly or indirectly. If two or more affiliates submit a bid, then
all of them will be disqualified.
Note:
i) Bidder shall submit documentary evidence to substantiate the above along with
their offer; BPCL reserves the right to verify the correctness of documentary
evidence furnished by the bidder.
ii) BPCL reserves the right to assess the capability and capacity of the bidder.
iii) BPCL and / or OMGCs reserve the right to verify the successful operation and
performance of qualifying ERCs and bidder shall arrange permissions for visiting
these installations.
Page 13 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
Query Format:
Bidders may attend the meeting at the office of the Corporation as mentioned below for
clarifications and / or pre-bid meeting if required at their own cost, in respect of their bids
without any commitment from the Corporation:
Non-attendance of the pre-bid meeting shall not be a cause of disqualification of the Bidder
In case any Bidder does not attend the pre-bid meeting, it shall be understood that the Bidder
has a clear understanding of the BQC, Scope of Work, Terms and conditions etc. of the
Bidding document and does not have any comment / deviation to the requirement of bidding
document.
General Terms and Conditions of the tender shall be governed as contained in GCC. For
this tender, all the places where “CONTRACTOR” is written may be read as
“CONSULTANT”. Attached GCC shall be applicable for this contract.
As a token of acceptance, download and take print out of acknowledgement format of GCC
(page-39 of GCC), and upload the document after duly signed by authorised signatory
along with company stamp.
8.0 AGREEMENT:
Successful Bidder shall have to execute Agreement in the format enclosed in GCC. As a
token of acceptance, kindly select (I AGREE) in the e-portal
Successful Bidder shall have to execute a Mutual Nondisclosure Agreement with BPCL in
the format enclosed.
Page 14 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
Unsolicited / conditional discounts if offered by any party will not be considered and offers
of parties offering such unsolicited discounts are liable to be rejected.
Based on the information and documents submitted, only parties meeting the Bid
Qualification Criteria will qualify for the techno commercial evaluation.
Price bid of only those bidders shall be opened who qualify in the Techno-commercial bid.
Bidder to submit following document while submitting their offer (As Applicable):
Only the techno- commercial qualified bidder price bid shall be opened, further the
Corporation reserves the right to reject any and /or every tender without assigning any
Page 15 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
reason whatsoever and / or place order on one or more bidders and / or carry out
negotiations with any bidder in the manner considered appropriate by the Corporation.
14.1 BPCL reserves the right to extend due dates of tender, accept or reject any tender in part
or full, without assigning any reason whatsoever. BPCL also reserves its right not to accept
the lowest rates quoted by the bidders and also to give purchase / price preference to
eligible Enterprises, as admissible under the existing policies of Government of India and
to JVs/ Subsidiaries as per BPCL guidelines.
14.2 OGMC reserves the right to start the job simultaneously at the five locations or each at
different times.
14.3 COST OF BIDDING: The Bidder shall bear all costs associated with the preparation and
submission of Bid, all activities in connection with bidding. BPCL will in no case be
responsible or liable for these costs regardless of the conduct or outcome of the bidding
process. Each Bidder accept and agrees, as a condition of submitting its Bid that it waives
any and all claims against BPCL, its Co-ventures and their affiliates, for remuneration or
restitution relating to its costs and expenses in.
14.4 CONTENTS OF BIDDING DOCUMENT: The Bidder is expected to examine carefully all
instructions, conditions, forms and terms given in the Bidding Documents. Failure to
furnish all information required by the Bidding Document or not responsive to the
requirements of the Bidding Document will be at the Bidder’s risk, and may result in
rejection of the bid.
14.5 OWNER’S RIGHTS TO ACCEPT / REJECT ANY OR ALL BIDS: BPCL reserves the
right to reject any or all the tenders without assigning any reasons whatsoever. Also BPCL
reserves the absolute right to reject any or all the bids / tenders solely based upon the past
unsatisfactory performance by the bidder / bidders in BPCL, the opinion/ decision of BPCL
regarding the same being final and conclusive.
Page 16 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
14.6 CONFIDENTIALITY OF BID DOCUMENT: The bidder shall not disclose any
information contained in the bid document or otherwise supplied in connection with this bid
to any third party, except for the purpose of preparing its bid and shall require any such
third party to treat such information as confidential.
14.7 PROCESS TO BE CONFIDENTIAL: After the opening of bids, information relating to the
examination, clarification, evaluation and comparison of bids and recommendations
concerning to award of contract shall not be disclosed to Bidders. Canvassing in any form
by the Bidder or by any other Agency on behalf of the Bidder after submission of the Bid
may disqualify the said Bid. Any effort by a Bidder to influence the owner in the process of
examination, clarification, evaluation and comparison of Bids, and in decisions concerning
award of contract, may also result in the rejection of the said Bid.
14.7 WRONG INFORMATION: If the Bidder deliberately gives wrong information in his Bid
to create circumstances for the acceptance of his Bid, Owner reserves the right to reject
such Bids without any reference to the Bidder.
14.8 VENDOR HOLIDAY LISTING: Vendors serving holiday listing order issued by BPCL,
MOP&NG or any other Oil PSEs would not get qualified in the tenders floated in BPCL till
the holiday listing order is revoked by the concerned authority and the proof of such
revocation is submitted to the tendering department.
A declaration to be submitted by bidder indicating that they are not on holiday list by BPCL
/ MOP&NG or any other Oil PSEs as on due date of bid submission anywhere in the
country. Offers not accompanied with such declaration shall make the bidders liable for
rejection. Any wrong declaration in this context shall make the bidders liable for action
under the Holiday Listing procedure.
14.9 CLARIFICATIONS OF BIDS: As part of examination, evaluation and comparison of
Bids, the Owner may at his discretion, ask Bidders individually for clarification or call
them for discussion of their Bid.
For Techno-Commercial clarifications, bidders shall normally be given a cutoff date for
furnishing clarifications. Clarifications received after the specified cutoff dates are liable
not to be considered for evaluation. Technical Query (TQ) / Commercial Query (CQ) shall
be issued to bidders through E-Mail / E-Tendering platform. Reply of TQ / CQ shall also be
received through E-Mail / E-Tendering platform.
14.10 SIGNING OF BID: The Bid must contain the name, designation, residence and place of
business of the person or persons submitting the Bid, and must be signed and sealed by the
Bidder with his usual signature. The names of all persons signing should also be typed or
printed below their signature.
Satisfactory evidence of authority of the person signing on behalf of the Bidder shall be
furnished with the Bid. The Bidder’s name stated in the Bid shall be the EXACT
Page 17 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
14.11 FIRM PRICES: The Contract Price shall remain firm and fixed till the completion of Work
in all respects and no escalation in prices on any account shall be admissible to the
BIDDER / CONTRACTOR.
14.12 INDIAN LAWS: Bidder is reminded that they will be subject to Indian laws, Government
of India rules and regulations / guidelines, practices and conditions as applicable from time
to time.
14.15 The successful bidder offering this consultancy shall not be eligible for quoting against the
tender for execution for setting up ERC in Future based on the feasibility report submitted
by them.
14.16 BPCL reserves the right to assess Bidder’s capability to execute this work by using in-house
information and taking into account various aspects such as past performance during
valuation of Bids.
14.17 In case any Bidder is found to be involved in cartel formation, their Bid shall not be
considered for evaluation / placement of order. Such Bidder will also be debarred from
bidding in future.
14.18 Canvassing in any form by the Bidder or by any other agency on their behalf may lead to
disqualification of their Bid.
14.19 Unsolicited clarifications to the Bid and / or change in the prices, unless otherwise allowed
in writing, during the validity period would render the Bid liable for rejection.
14.20 Bidder shall not be under liquidation, court receivership or similar proceeding.
14.21 Bids from Consortium / Unincorporated Joint Venture shall not be accepted.
Page 18 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
SECTION 2:
INSTRUCTION TO BIDDERS
Page 19 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
GENERAL:
Oil & Gas Marketing Companies, namely, Indian Oil Corporation Ltd (IOCL), Hindustan
Petroleum Corporation Ltd (HPCL), Bharat Petroleum Corporation Ltd (BPCL), ONGC Limited
and GAIL (India) Limited herein referred to as OGMCs are Public sector National Oil Companies,
under the aegis of Ministry of Petroleum and Natural Gas, Govt. of India, are engaged in
exploration, refining and marketing of petroleum products. These OGMCs have their Oil
Installations in cluster at various places in India.
OGMCs propose to set up Emergency Response Centres (5 no’s) at different locations in India at
Jaipur, Vizag, Manmad, Hazira and Dibiyapur (Near Kanpur), respectively.
These locations have been selected based on existence of cluster of oil and gas installations and
terminals in the nearby areas to these locations. Each ERC shall cater to facilities within the range
of 300 Kms (radius).
OGMC intend to engage agency / party for consultancy job to help OGMCs set up Emergency
Response Centres.
Page 20 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
The Tenders are invited by BPCL on behalf of OGMCs under two bid systems, i.e. (A) Technical
Bid with all commercial terms without price bid and (B) Price Bid for engaging Consultant who
have expertise on the concept, design, development and setting up of ERC for fighting large
Petroleum fire of Oil Installations internationally.
1.1 Bids are invited for the subject tender and the overall description of the Activities is set out
in the scope of work and technical requirements Stipulated at various sections of the bid
document.
1.2 The bidding documents are and shall remain the exclusive property Of BPCL and the
Bidder has no right to use them for any other purpose except bidding. The successful
Bidder only can use them for reference in conducting the work under bid.
1.3 The detail as called for in the bidding documents shall be filled and completed by Bidder in
all respects and shall be submitted with requisite Information and annexure.
1.5 Bidder shall clearly indicate his legal constitution and the person signing the bid shall state
his capacity as also the source of his ability to bind the Bidder. The Power of Attorney or
Authorization or other document constituting adequate proof of the ability of the Signatory
to bind the Bidder, shall be annexed to the Bid. BPCL may reject outright any bid
unsupported by adequate proof of the signatory authority.
1.6 The complete bid shall be signed and stamped by the Bidder on each page as a token of
acceptance.
1.7 The General / Special Conditions of the Contract shall form a part of the contract.
1.8 Tenders shall be submitted in the prescribed form downloaded from the web site
https://www.bpcleproc.in
1.9 Tender shall be for the entire scope of work mentioned in the tender documents.
1.10 Before quoting, the tenderer shall visit the site and fully understand the scope of work
under this contract, working conditions, Labor deployment requirements, risk contingencies
and such other factors which may affect their tender.
Page 21 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
1.11 Validity of offer: 180 (one hundred Eighty) days from the date of opening of tender /
Extended Tender Due Date for placement of order.
1.12 All direct and indirect costs associated with the preparation and submission of Bid, any
other expenses in connection with Bid (including clarification meetings and visits by
Bidder to Owner / BPCL / OGMC offices or to Licensee locations, if any) shall be to
Bidder’s account. Owner will in no case be responsible or liable for those costs,
regardless of the conduct or outcome of the Bidding process.
Page 22 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
confidential nature of the documents and have undertaken to be bound by and maintain
confidentiality.
2. METHODOLOGY FOR AWARD OF CONTRACT
HOW TO QUOTE:
Your quoted prices shall be inclusive of all taxes and duties except Goods and Services Tax
(GST). GST shall be quoted separately and shall be applicable extra on the quoted price.
Your quoted prices shall be inclusive of all non-Indian taxes and duties and Indian
Withholding tax. Indian taxes and duties except Indian Withholding tax shall be BPCL
account. Indian Withholding tax shall be deducted from the invoice value by BPCL and
necessary certificate shall be issued by BPCL.
METHOD OF EVALUATION:
The bids can be submitted in the e-procurement website up to the tender due date and time.
The bids will be opened online through e-procurement website https://bpcleproc.in.
Scrutiny of Un-priced bids basis will be carried out as per the qualification criteria as
mentioned in Bid Qualification criteria section of tender document.
FINANCIAL EVALUATION:
After floating of tender, Pre bid meeting as communicated in the Paper advertisement /
E-Proc website / www.bharatpetroleum.com will be arranged and those who are interested
can attend. After Technical evaluation of the tender is over, all the qualified bidders will be
notified and PRICE BID shall be opened with prior intimation to qualified bidders through
the e-portal.
After opening of priced bid, the bids shall be financially evaluated based on the total cost
and the lowest bidder shall be established. Evaluation of bids shall be done on the rates
quoted by vendor in priced bid and the lowest bidder (Cost to Company) shall be
considered for award of work. The LOI (followed by Detailed Purchase Order/s) shall be
placed on the successful bidder.
Page 23 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
3. SITE VISIT
3.1 The bidder can visit the ERC site locations (as mentioned in the Scope of work, including
locations to be covered by each ERC) and examine the site of works and their surrounding
and obtain for himself on his own responsibility all information that may be necessary for
preparing of the bid and entering into the contract. The cost of visiting the sites shall be at
bidders own expenses. For the purpose of obtaining visa, no specific business invitation
letter shall be provided. No extra claim on account of non-familiarity of site conditions
shall be entertained during execution of the contract. Bidder to plan site visit well in
advance and any request for extension of tender due date shall not be entertained.
3.2 The bidder and any of his personnel or agents will be granted permission by the Owner to
enter upon his premises and lands for the purpose of such inspection, but only upon the
explicit condition that the bidder, his personnel or agents will release and indemnify the
Owner and his personnel and agents from and against all liability in respect thereof and will
be responsible for personnel injury (whether fatal or otherwise), loss of or damage and
expenses incurred as a result hereof. For visiting any of the Oil installations, prior
permission and approval is required from Government of India and only after clearance the
personnel shall be allowed to undertake the travel.
The following details are required to be submitted along with the technical bid:
a. Audited Annual Report for last three financial years by any Independent Chartered
or Certified Accountant.
d. Declaration for not having been banned / delisted by any Government or quasi
Government agencies or PSUs.
e. Details of PAN (Permanent Account Number) (if applicable) and Power of attorney
holder
Page 24 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
5.1 BPCL may issue clarifications / amendments in the form of addendum/ corrigendum during
the bidding period and may also issue amendments subsequent to receiving the bids. For the
addendum / corrigendum issued during the bidding period, bidders shall confirm the
inclusion of addendum / corrigendum in their bid. Bidder shall follow the instructions
issued along with addendum / corrigendum.
5.2 Bidders shall examine the Bidding Document thoroughly and submit to BPCL any apparent
conflict, discrepancy or error. BPCL shall issue appropriate clarifications or amendments, if
required. Any failure by Bidder to comply with the aforesaid shall not excuse the Bidder
from performing the Services in accordance with the contract if subsequently awarded.
Bidder shall treat the Bidding Document and contents therein as private and confidential
and shall not use the Bidding Document for any other purposes.
7.0 DOCUMENTATION:
Bidder shall furnish documentary proof of fulfilling the Bidder’s Qualification Criteria.
For Technical Criteria and Financial Criteria in BQC, Bidder shall submit complete audited
financial statement along with audit reports, profit & loss accounts statement and all
schedules of the preceding 3 (Three) financial years.
In case audited balance sheets and profit and loss account for the immediate preceding
financial year is not available for Bid closing date, the Bidder has an option to submit the
audited balance sheets and profit & loss account of the three previous years immediately
prior to the last financial year.
In any case the date (i.e. the financial period closing date) of the immediate previous year’s
audited annual accounts should not be older than eighteen (18) months from the Bid due
date.
All documents furnished by the bidder in support of meeting the Technical and Financial
criteria of BQC shall be:
Either
Duly certified by Statutory Auditor of the bidder or practicing Chartered Accountant (not
being an employee / Director and not having any interest in the bidder’s company/firm)
where audited accounts are not mandatory as per law.
Or
Page 25 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
Duly notarized by any Notary Public / Apostille in the Bidder’s Country or certified true
copies duly signed, dated and stamped by an official authorized for this purpose in Indian
Embassy / High Commission in Bidder’s country.
Or
Bidder shall submit self-certified documents in original from any one out of CEO or CFO
or Company Secretary or Head of Organisation (HOD) of the bidder (Limited company
only) along with Self-Certification. This option shall not be applicable to Proprietorship /
Partnership firms.
With regards to financial documents, in case Bidder submits bound published and audited
annual financial statements including balance sheet, profit & loss accounts and all other
schedules for the preceding three financial years in original, the same shall be considered
without certification of Statutory Auditor / Notarization of Notary Public / Apostille.
However, in case the Bidder submits either a photo copy of published statement or a
translated copy of the published financial statements, the same shall be certified either by
statutory auditor or Notary Public / Apostille, in original as per above clause.
The bid and all correspondence incidental to and concerning the bid shall be in the English
Language only. In case of Foreign Bidder, if the above supporting documents including
bound annual published report are not in English language, then the English translation
copy of the same shall also be furnished duly certified, stamped and signed by Local
Chamber of Commerce in addition to certification. Translation from agencies approved by
relevant embassy / high commission or other accredited agencies shall also be acceptable.
All documents furnished by the bidder in support of meeting the Technical and Financial
criteria of BQC as per IFB shall be submitted in a separate section / booklet along with
their offer. This section / booklet shall be titled as “Documentation against Bidder’s
Qualification Criteria (Technical and Financial)” with proper index and page
numbering.
Any additional documents, if deemed necessary to establish the qualifying requirements
may be submitted by the Bidder.
BPCL reserves the right to complete the evaluation based on the details furnished (without
seeking any additional information) and / or in-house data, survey or otherwise.
Failure to meet the above Qualification Criteria will render the Bid to be summarily
rejected. Therefore, the Bidder shall in their own interest furnish complete documentary
Page 26 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
evidence in the first instance itself along with their bids, in support of their fulfilling the
Qualification Criteria as given above
8.0 CAUTION AND DISCLAIMER
Transfer of Bid document by the bidder is not permitted. Bidder shall be responsible for
interpretation of any / all information provided in the Bidding Document and any error in
interpretation shall not be attributable to BPCL. Although certain information are provided
in the Bidding Document, however, bidder shall be responsible for obtaining and verifying
all necessary data and information as required by him.
BPCL reserves the right to accept or reject any / all tender in whole or in part without
assigning any reason whatsoever. BPCL shall not be bound to accept the lowest tender and
reserves the right to accept any or more tenders in part. Decision of BPCL in this regard
shall be final.
8.2.1 The bidders are required to submit offers strictly as per the terms and conditions & scope
given in the Bidding Document and not to stipulate any deviations. The deviations if any
have to be spelt out clearly in the Annexure for Deviation. Deviations not highlighted in
this Annexure shall not be considered as deviation and considered as deemed acceptance
of tender conditions. BPCL reserves the right to give opportunity to bidder for
withdrawal of deviation.
Bidder’s standard Terms & Conditions and contra conditions shall not be considered. If
Bidder insists on acceptance of such Terms and Conditions, it shall subject such Bid to
rejection.
8.2.2 In case Bidders wish to stipulate any deviation to Bidding Document requirements other
than those stated above, they shall indicate the same as per the proforma enclosed in the
Bidding Document. Bidder shall note that clarification / queries / deviations mentioned
elsewhere in the offer shall not be given any cognizance. However BPCL reserves their
right to reject bids containing deviations to any of the Bidding Document stipulations.
Bidders are advised to quote strictly as per terms and conditions of the Bidding Document
and not to stipulate any deviation / exceptions. Once, quoted the bidders shall not make any
subsequent price changes, whether resulting or arising out of any technical / commercial
Page 27 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
clarifications sought / allowed on any deviations or exceptions mentioned in the bid unless
discussed and agreed by BPCL in writing.
i) Prior to the financial evaluation of bids, the BPCL will determine whether each bid is
substantially responsive to the requirements of the Bidding Document.
ii) For the purpose of this Clause, a substantially responsive bid is one which conforms to
all the terms and conditions and specifications of the Bidding Document without
material deviation or reservation. A material deviation or reservation is one which affects
in any substantial way the scope, quality, or performance of the works or which limits in
any substantial way, inconsistent with the Bidding Document, the BPCLs rights or
Bidder obligation under the Contract and retention of which deviation or reservation
would affect unfairly the competitive position of other bidders presenting substantially
responsive bids.
iii) If a bid is not substantially responsive to the requirements of the Bidding Document, it
may be rejected by the BPCL. Such rejection may be intimated to the Bidder.
9.1 The “PRICE BIDS” of only substantially responsive bidders and techno– Commercially
accepted shall be considered for opening.
9.2 Indian Bidders shall quote the prices in Indian Rupees only. Foreign Bidders shall quote the
prices in USD only for line item 1,2 and 3 and in INR for line item 4.
9.3 Price evaluation will be done overall landed cost basis as per the special conditions of the
contract provided.
Quoted prices in foreign currency shall be considered for evaluation. Exchange rate as
per SBI TT Selling rate on the date of opening of the Un-priced bid shall be
considered for conversion of the offer to INR for comparison and evaluation of the
quotes. In case, exchange rate is not available in State Bank of India (Mumbai) on that
date, then SBI TT Selling rate on the date previous to the date of opening of the un-
priced bid shall be considered.
The quoted prices shall be checked to determine the arithmetical correctness of the same.
Page 28 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
9.4 BPCL reserves their right to extend purchase / price preference to NSIC / Public Sector
Enterprises / Purchase Preference Linked with Local Content as admissible under the
existing policies of Government of India as on the date of opening un-priced bids.
9.5 BPCL reserves their right to negotiate the quoted price with lowest bidder.
9.6 Deviations
Bidder is expected to submit Bid strictly on the terms and conditions and technical
specifications contained in the Bidding document and will not stipulate any deviations/
exceptions/ alterations. In absence of any specific mention of any departure from the
Bidding Document, the provisions of the Bidding Document will be binding on the
Bidder.
In unavoidable circumstances, all exceptions and deviations taken by the Bidder to the
stipulations of the Bidding Document shall be indicated at one location in the Technical
and Unpriced Commercial Part of the Bid in the format only contained in the Bidding
document and not elsewhere in the un-priced (Techno Commercial) Bid or in Priced
Bid. Any exceptions or deviations indicated elsewhere in the bid shall not be construed
as valid and shall not be given cognizance during Bid evaluation and signing the
Agreement with the selected bidder.
10.0 REBATE
No suo-moto reduction in prices quoted by bidder shall be permitted after opening of the bid.
If any bidder unilaterally reduces the prices quoted by him in his bid after opening of bids,
the bid (s) of such bidder(s) will be liable to be rejected. Such reduction shall not be
considered for comparison of prices but shall be binding on the bidder in case he happens to
be a successful bidder for award of work.
12.0 OWNER’S RIGHT TO ACCEPT ANY BID AND TO REJECT ANY OR ALL BIDS
12.1 Owner reserves the right to accept or reject any bid, and to annul the bidding process and
reject all bids, at any time prior to award of contract, without thereby incurring any liability
Page 29 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
to the affected Bidder or Bidders or; any obligations to inform the affected Bidder or
Bidders of the ground for the Owner’s action.
12.2 The submission of any bid connected with these documents and specifications shall
constitute an agreement that the Bidder shall have no cause for action or claim, against the
Owner for rejection of his bid. The Owner shall always be at liberty to reject or accept any
bid or bids at his sole discretion and any such action will not be called into question and the
Bidder shall have no claim in that regard against the Owner.
13.1 Consultancy services order / Purchase Order shall be prepared for award of the Job.
Successful bidder shall be intimated regarding award of Job through Fax / Letter of Intent.
Until the final PO is prepared and executed, this Bidding Document together with the
annexed documents, modification, deletions agreed upon by the BPCL and Bidder’s
acceptance thereof shall constitute a binding contract between the successful bidder and the
BPCL based on terms contained in the aforesaid documents and the finally submitted and
accepted prices.
13.3 The statement of agreed variations shall be prepared based on the finally retained deviations,
if any, by the Bidder and accepted by BPCL. All other correspondences between BPCL and
the Bidder prior to issue of Fax / Letter of Intent shall be treated as Null & Void. Any
deviations or stipulations made and accepted by BPCL after award of the job shall be treated
as amendments to the contract document as above.
The guidelines and procedures for Holiday Listing are available separately in BPCL website
and shall be applicable in the context of all tenders floated and consequently all orders /
contracts / purchase orders. It can be accessed using the following link:
https://bharatpetroleum.in/pdf/holidaylistingpolicyfinal.pdf
15. It shall be understood that every endeavor has been made to avoid errors which can materially
affect the basis of the tender and the successful bidder shall take upon himself and provide for
Page 30 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
risk of any error which may subsequently be discovered and shall make no subsequent claim on
account thereof.
16. Courts in the city of Mumbai alone shall have jurisdiction to entertain any application or other
proceedings in respect of anything arising under this tender either before or after or during
finalization of the tender.
17.1 Proforma of Integrity Pact (IP) shall be returned by the Bidder/s along with the bid
documents, duly signed by the same signatory who is authorized to sign the bid
documents. All the pages of the Integrity Pact shall be duly signed, scanned and uploaded
along with other documents. Bidder's failure to upload the IP duly signed along with bid
documents shall result in the bid not being considered for further evaluation.
17.2 If the Bidder has been disqualified from the tender process prior to the award of the
contract in accordance with the provisions of the IP, BPCL shall be entitled to demand and
recover from Bidder Liquidated Damages amount by forfeiting the EMD/ Bid Security as
per provisions of IP.
17.3 If the contract has been terminated according to the provisions of the IP, or if BPCL is
entitled to terminate the contract according to the provisions of the IP, BPCL shall be
entitled to demand and recover from Contractor Liquidated Damages amount by forfeiting
the Security Deposit/Performance Bank Guarantee as per provisions of the IP.
17.4 Bidders may raise disputes/complaints, if any, with the nominated Independent External
Monitors (IEM), appointed by Central Vigilance Commission (CVC). The IEM's name,
address & contact number is given below:
ADDRESS ADDRESS
GFQ, Ist Floor, B. Block, Summit No.9MCHS (IAS Officers Colony), 16th
Apts. Mettupalayam Road, Main, 5th C Cross, BTM 2nd stage,
Coimbatore - 641 043 Bangalore – 560 076
ssnm1950@yahoo.com shantanuconsul@gmail.com
Page 31 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
18 CARTEL FORMATION:
In case any Bidder is found to be involved in cartel formation, his / their Bid will not be
considered for evaluation / placement of order. Such bidder will also be debarred from
bidding in future.
19 FRAUDULENT PRACTICES:
The Owner requires that Bidders observe the highest standard of ethics during the Bidding
Process / execution of Contract Agreement. “Fraudulent Practice” means a
misrepresentation of facts in order to influence the award of a Contract to the detriment of
the Owner, and includes collusive practice among Bidders (prior to or after Bid
submission) designed to establish bid prices at artificial non-competitive levels and to
deprive the Owner of the benefits of free and open competition.
The OWNER will reject a Bid for award if it determines that the bidder recommended for
award has engaged in fraudulent practices in competing for the Contract in question.
Bidder is required to furnish the complete and correct information / documents required
for evaluation of their Bids, if the information/ documents forming basis of evaluation is
found to be false/ forged, the same shall be considered adequate ground for rejection of
Bids
In case, the information/ document furnished by the Bidder forming basis of evaluation of
his Bid is found to be false/ forged after the award of the contract,
Owner shall have full right to terminate the contract Agreement and get the remaining job
executed at the risk & cost of such Bidder without any prejudice to other rights available
to Owner under the contract such as forfeiture of CPBG / Security Deposit, withholding
of payment etc.
In case, this issue of submission of false document comes to the notice after execution of
work, Owner shall have full right to forfeit any amount due to the Bidder along with
forfeiture of CPBG/Security Deposit furnished by the Licensor.
Further, such Bidder shall be put on Blacklist/ Holiday/Negative List of Owner debarring
them from future business with Owner for a time period, as per the prevailing policy of
Owner
All foreign nationals coming to India for execution of Projects / Contracts will be
permitted with a valid Indian visa and permission from Government of India
Page 32 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
Bidders are advised in their own interest to check latest Visa rules from Indian Embassy /
High Commission in their country in case foreign nationals are required to be deputed to
India during execution of the Contract.
The terms “BPC”, “BPCL”, The Corporation, the Company and Owner in the appropriate
context means Bharat Petroleum Corporation Limited, the Company registered under
Companies Act 1956 and includes its successors and assignees.
The successful bidder shall submit the security deposit by way of DD/ PBG for 10% of the
order value against the P.O., before commencement of the work itself. The Security Deposit
towards Performance (if submitted in the form of BG) shall be kept valid for the entire
duration of Contract + 12 months towards defect liability and a further claim period of 6
months from end of Defect Liability period.
Security deposit shall bear no interest and will be returned to the consultant after the
completion period. The Detailed scope of work has been given separately in the tender
document. For more details refer to GCC enclosed with the tender
Page 33 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
*******
Page 34 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
SECTION 3:
Page 35 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
Except as otherwise expressly provided or unless the context otherwise requires, in this Contract,
the following terms shall have the meanings set forth below:
"Affiliate" means with respect to any Person, any other Person controlling, controlled by or under
common control with such Person. In this context "control" means ownership of fifty per cent
(50%) or more of the voting securities or equivalent interest of a Person.
"Approval" means approval in writing by an authorized signatory of Owner or Consultant (as the
case may be), and "approve" or "approved" shall be construed accordingly.
"Certificate of Acceptance" means the Certificate to be issued by the Owner in respect of the
Work.
“Change in Law” shall mean the occurrence after the Effective Date of any enactment of new
Indian Law or the modification of existing Indian Law, or the repeal or re-enactment of any Indian
Law.
“Change Order” shall mean the order to be issued by BPC on the Contractor for carrying out any
change in scope of work (addition / deletion) as mutually agreed.
“Cold Permit” shall mean the work permit taken by the execution team of the successful bidder
to perform cold works inside hydrocarbon storage, operating location.
“Contract Period” shall mean the period during which the Agreement is valid and subsisting.
"Consultant" means collectively, the Successful Bidder for relevant job on whom PO has been
placed,
"Consultant's Personnel" means all directors, officers, employees and other personnel of
Consultant.
"Contract Price" means the lump sum fixed price described in Price Bid, payable by Owner to
Consultant in consideration of performing the Work, in accordance with the terms, conditions and
provisions of this Contract.
Page 36 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
"Design Information" means designs, drawings, technical data, reports, surveys or other
documents required as deliverable by owner to Consultant, "Document Control Requirements"
means the requirements for document control.
“Drawings” shall mean all drawings, documents, manuals, etc. including plans and sketches,
which are necessary for the full performance of the Services and which shall be provided by PMC
(“PMC drawings”).
“EPCC” contracts mean the contracts for Engineering, Procurement and Construction and
commissioning.
“EPCC Contractor” shall mean any third party whose services are obtained or to be obtained by
the OWNER on a lump sum basis for Engineering, Design, Procurement, Supply, Construction &
Commissioning.
“Hot Permit” shall mean the work permit taken by the execution team of the successful bidder to
perform hot works inside hydrocarbon storage, operating location.
"Key Personnel" means individuals who are considered by Owner to be critical to the completion
of the Work in accordance with this Contract and notified by Owner to Consultant pursuant to
Article 21.2 as being key personnel.
“Law” shall mean the Constitution of India and any act, rule, regulation, notification, directive,
ordinance, order or instruction having the force of law enacted or issued by the Government.
"Lien" means any mortgage, hypothecation, pledge, security interest, attachment, lease, claim or
other encumbrance of any kind.
Page 37 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
"Milestone" means the milestone to be achieved by a specified date or within a specified period
"Milestone Value" means in respect of any Milestone that part of the Contract Price payable in
respect of that Milestone.
“Oil and Gas Marketing Companies (OGMCs)” means Companies viz. IOCL, HPCL, BPCL, ONGC,
GAIL (INDIA) Ltd.
“Operator / Contractor” shall mean the Contractor and their respective successors, authorized
representative and permitted assigns.
“Party / Vendor” shall mean the Contractor and their respective successors, authorized
representative and permitted assigns.
“Permits” shall mean all consents, licenses, approvals, permits, no objection certificates or other
authorization of whatever nature which is required to be granted by the Government or under
Law for the purpose of implementation of this Agreement and the Bid Package.
“Project Manager” shall mean the personnel nominated by the CONSULTANT to head the Project
Management Office (PM) and shall be based in India
"Scope of Work" means the activities set forth in tender to be undertaken by Consultant.
"Subcontractor" shall mean any person or entity providing services included in the Scope of Work
pursuant to a subcontract with Consultant.
“Storage” shall mean the keeping or storing of the Petroleum Products in the Storage Facility.
“Storage Facility” shall mean the Petroleum Products facility available in the Terminal.
“Tax” shall mean any Indian tax, duty, import or levy of any nature whatsoever and wherever
charged levied, imposed by the Government together with any interest and penalties in relation
Page 38 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
thereto other than interest and penalties imposed directly as a result of any act or omission by
the Contractor.
“Time Schedule” shall mean the time schedule as defined in the contract document.
"Tender” or “Proposal" means the document submitted by a person or authority for carrying out
the Services
"Work" means the Design and Consultancy services more fully described in the Scope of Work to
be provided in accordance with this Contract, all necessary work and services to be performed by
Consultant to satisfy its obligations under this Contract.
INTERPRETATION
(a) References in the singular shall include references in plural & vice-versa. The words denoting
natural persons shall include partnerships, firms, companies, corporations, joint ventures,
trusts, association, organization or other entities (whether or not having a separate legal
personality). The masculine shall include the feminine and neuter genders and vice versa
(b) The expression written in CAPITAL or small font or first letter Capital in the document has the
same meaning of the expression as defined above.
(c) The words denoting a “person” shall include an individual, corporation, company, partnership,
trust, ship or other entity.
(d) Headings are for convenience of reference only and shall be ignored for the purposes of
construction or interpretation of this document.
(e) Reference to any legislation or law or to any provision thereof shall include references to such
law as it may, after the date of the contract, from time to time be amended, modified,
supplemented extended or re-enacted.
(f) References to a particular clause, paragraph, sub-paragraph or schedule shall, except where
the context otherwise requires, be a reference to that clause, paragraph, sub-paragraph or
schedule in or to this tender.
(g) The word “include” & “including” are to be construed without any limitation.
(h) No permit/license shall be treated as having been granted for the purpose of this tender
unless such permit/license has been finally granted or issued by the relevant competent
authority without such grant or issue being subject to any appeal, but the possibility of
proceedings for judicial review of such permit being instituted shall not prevent a permit
being treated as granted unless such judicial review proceedings have, in fact, been instituted.
Page 39 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
(i) In determining whether any permit has been granted or renewed, or whether any written
confirmation in respect of any permit has been given, on a timely basis, regard shall be had to
(1) the practice & procedure of the Government having jurisdiction in respect of the relevant
permit
(2) any representation made by BPCL, the contractor or the responsible Government
regarding the expedition with which applications for the relevant permit are to be
determined
(3) any reasonable request (having due regard to sub Para (i) & (ii) above) regarding the
period with in which BPCL/Contractor seeks the determination of its application for the
relevant permit, and the materiality of the implications of any delay in such
determination, which have been made known to the Government upon the making of its
application or in the course of its determination.
Page 40 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
SECTION 4:
SCOPE OF WORK
Page 41 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
SCOPE OF WORK
CONSULTANCY SERVICES FOR BASIC DESIGN AND ENGINEERING, DEVELOPMENT AND SETTING
UP OF EMERGENCY RESPONSE CENTRES (ERC)
Oil and Gas Marketing Companies, namely, Indian Oil Corporation Ltd (IOCL), Hindustan
Petroleum Corporation Ltd (HPCL), Bharat Petroleum Corporation Ltd (BPCL), ONGC
Limited and GAIL (India) Limited are Public sector National Companies. These OGMCs
have their Oil Installations in clusters at various places in India.
OGMCs propose to set up ERC (Emergency Response Centre) at 5 (five) different locations
in India viz. Jaipur, Vizag, Manmad, Hazira and Dibiyapur respectively.
These locations have been selected based on the existence of cluster of oil and gas
installations and terminals in the nearby areas to these locations. Each ERC shall cater to
facilities within the range of 300 Kms (Radius).
OGMCs intend to engage agency / party for a consultancy job for basic engineering design,
detailed feasibility study, supervision of construction and commissioning of respective ERC
and suggest so as to help the OGMCs to set up ERC. This Global tender is floated by BPCL
on behalf of OGMCs for inviting response from potential firms / consultants / agencies who
have expertise on the concept design, development and setting up of large ERC
Internationally for fighting large Petroleum fire of Oil and or, GAS and or petrochemical
Installations and controlling major oil spillage.
Whereas the Indian Oil Industry complies with best practices related to prevention of
emergency incidents at POL terminals, it is recognized that accidents / fires can still happen
and that there must be a response capability for them. The ERC envisaged shall have
following broad outlines:
The Emergency Response Centre (ERC) shall consist of specialist resources, self-sufficient
to respond and manage fire / other emergency incidents outside the normal design events
for which there are equipment/systems provided on -site. This shall include incidents such
as fires involving multiple tanks or large bunded areas, major leakage at POL/Pipeline
locations.
Each of these units shall be able to cater to emergencies up to about 300 kms (Radius),
however the consultant shall advise the modalities of each ERC.
Page 42 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
The ERC shall be a Centre of Excellence with constant readiness to provide this response
capability in an efficient manner. It shall include the necessary trained specialist personnel
and resources in terms of Buildings, Infrastructure, Communications Equipment, Training
aids and Response Hardware. The ERC personnel will direct regular exercises and
procedures to ensure the constant state of readiness. The ERC shall include all necessary
hardware which can be transported to respond to large scale Emergency Incidents.
Infrastructure:
a. Control Room with required equipment / systems / software infrastructure
b. Parking bays for vehicles
c. Office rooms, Record room, Change rooms.
d. Warehouse
e. Overhead and Underground Storage Tanks.
f. Boundary Wall and fencing
g. Sub-station with Emergency Power backup
h. Communication system with redundant technology.
i. Portable equipment and rescue stores
j. Fire training ground facility inclusive of live fire fighting
k. Accommodation for crew Canteen
l. Occupation Health Centre
m. Training hall for 50 persons
n. Maintenance & Repair shed
o. Any other facility required for Operation/Maintenance as identified by consultant.
This is a typical list, however consultant with his expertise and knowledge must study the
specific requirements for each ERC, the risks to be protected in the 300 Km radius, the
water resources and if required add/modify/ delete the list of equipment and quantities with
detailed justifications. Cost and quantity optimization is also expected to be considered
while making final recommendations.
Page 43 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
Indicative list of Equipment for ERC (suitable for 79 m. dia. full surface tank fire)
S. No. Equipment
Set of Hydraulic Submersible pumps Or Hydraulic Submersible
1.
pumps
Diesel engine driven Booster pump with inlet & outlet connection
2.
couplings
3. Hose laying and Retrieval Skid along with pickup truck chassis.
Rubber / TPU lined flexible hose with storz /LHDC/Equivalent
4.
couplings
Hose laying and Retrieval Skid with hose ramps (Imported) along
5.
with pickup truck chassis.
length Rubber / TPU lined flexible hose with storz
6.
/LHDC/Equivalent couplings
Foam monitor with storz /LHDC/Equivalent coupling for foam
7.
induction.
8. Connection hardware, manifold, adaptors, couplings, etc.
9. Foam Tender fitted with. Foam Tank + Proportionating system
Foam Pumper fitted with. Foam tank + GPM water pump +
10.
Proportionating system (Imported)
Aerial Foam Tender fitted with GPM Foam Monitor + GPM water
11.
pump + Foam tank + Proportionating system (Imported)
3D Monitor (water, foam, DCP) along with DCP Vessel, nitrogen
12. expellant, connected piping, water inlet manifold, JRCP, hose with
storz /Equivalent coupling mounted on skid.
Rescue cum Communication Equipment Vehicle (List of Tools
13.
attached)
14. Foam trailers
15. AR-AFF Foam 1% / 1%
16. Dry Chemical Powder (Potassium Urea based)
17. Hook Lift Crane for loading / unloading of suitable capacity
LPG Rescue / Response vehicle consisting of pump, compressor,
18.
hoses, flare equipment, protective equipment etc.
Long chassis trailer for transportation of monitor, hose, pump
19.
skid, etc.
Page 44 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
The consultant shall consider a minimum 30 (thirty) visits towards consultancy for development
of DFR as well as execution of LSTK projects, commissioning and handing over.
The broad scope of work shall include but not limited to the following:
PHASE -1
PREPARATION OF DETAILED FEASILIBITY REPORT
The feasibility report for all 5 ERC shall be separately prepared for individual ERC include
the following for each ERC (i.e. all five ERCs)
1. Site Visits and data collection like soil investigation, contour study etc. to be carried out
3. Block layout drawing showing various buildings, sheds etc with their sizes
9. Estimate of each ERC separately, cost of land need not be included in project cost. All other
costs including Consultants fee, training, FAT expenses, third party pre dispatch inspection,
to be included
10. Approximate manpower for O&M of each ERC along with qualification criteria i.e. Man-
power management of ERC.
11. Capital and operating cost, overall summary sheet of project cost with the cost break-up for:
a) Equipment Cost
b) Civil & Mechanical works
c) Piping and structural works
d) Site Development
Page 45 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
13. Project Implementation strategy, execution methodology and project schedule along with
bar chart
14. Overall plot plan in line with statutory norms as applicable (green belt as per norms to be
identified and marked in the plot plan)
17. Study and proposal of any modification required for hookup of the ERC facilities with the
existing Oil and LPG terminals.
18. Study of water body within the vicinity of the oil and gas installations (POL, LPG &
Refineries) which the ERCs are proposed to cater fire hazards in oil installations. The
detailed study shall encompass the following (but not limited to):
Page 46 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
Hindrances in laying of hoses from water body to mobile fire tender/ right of way
requirements.
List of approvals required for withdrawing water from the said water body
List of equipment (with the estimated cost) proposed inside the water body for suction
and pushing the water to mobile fire tender with their principle of working (e.g.
operating on DG electrical power)
In case any shortfall of water noted within the vicinity of the Oil and gas installation
(POL, LPG & Refinery), recommendation to be suggested by the consultant for make
up of the shortfall.
19. Complete plot plan with all facilities, roads, drainage etc. in line with statutory
requirement.
20. Schematic drawing showing working methodology of mobile fire tender along with water
suction arrangements and throw to the effected tank.
To carry out the feasibility study, Consultant shall carry out following activities:
1. The Consultant shall visit all five ERC locations and the oil and gas installations (POL,
LPG & Refineries) within the 300 kms (radius) in India, review Oil handling facilities and
have interaction with client to determine how the feasibility analysis shall be utilized and
provide a functional report.
2. The Consultant shall study the design of existing firefighting system and its adequacy. The
ERC should be designed to cater for additional firefighting systems to extinguish fire
within 65 minutes of initiation of attack as per NFPA 11 standards. The tentative
equipment listed above is based on this assumption.
4. The Consultant shall review the geographical space of ERCs, journey management along
with response time.
5. The consultant shall also suggest the communication with redundant technology, training,
operation & maintenance philosophy and network management of all ERCs. In addition,
the consultant shall also give the suggested organogram for each ERC with competence
profile for each position.
Page 47 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
6. The consultant shall also suggest computer software available for networking with other
coordinating agencies like NDMA, OISD, Local Fire brigade, NDRF, and media. Apart
from software required for functioning of ERC.
7. After completion of above mentioned activities, Draft feasibility report (2 sets in hard
format and a soft format for each ERC) shall be submitted to Oil Industry for review and
acceptance. At this stage the Consultant shall be required to make two presentations, one
for Oil Industry and second for the Govt. / other agencies officials. Both may be considered
as separate visits and the fee quoted must include this, no separate payments shall be made.
Thereafter the comments/ suggestions should be included and the Final DFR should be
submitted for each ERC to each OGMCs.
Based on the acceptance, and providing clearance to proceed, the Phase-2 jobs shall be
taken up, which shall majorly consist of the following.
PHASE – 2
PREPARATION, EVALUATION AND RECOMMENDATION
A LSTK (Lump sum turnkey) tender shall be prepared for each of the 5 ERC locations for
appointment of agency for Detailed Engineering, Design, equipment procurement, construction
and operations of ERC for 10 years with their own operating manpower. The tender will
however be separately floated and finalized jointly by the OGMCs. The draft tender document
shall include but not limited to:
1. Preparation of tender enquiry with Bid Qualification Criteria for Engineering, procurement,
construction and commissioning (EPCC) of the project for lump sum turnkey (LSTK)
execution. Tender document shall be reviewed / approved by Oil and Gas Marketing
Companies for which adequate time should be given. The evaluation criteria will be
developed by Consultant in consultation with the Oil and Gas Marketing Companies
Page 48 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
2. The consultant shall carry out basic design and engineering package (BDEP), Front end
engineering and design (FEED) required for preparation of tender for finalization of LSTK
contractor.
4. The Consultant should prepare EPCC tender documents as above to enable LSTK
contractor to prepare the detailed Engineering in conformity with International Standards
and sound Engineering practices. The EPCC tender document will have to be
comprehensive, sufficiently detailed, self-contained, to enable getting competitive lump
sum bids, without scope of subsequent corrigenda/addenda/modifications during bidding
stage. Any delay on account of extension of time granted in submission of bids by LSTK
bidders on account of corrigenda/addenda/modifications issued by the Consultant shall be
attributed to the Consultant if it is established beyond doubt that consultant is solely
responsible for issue of corrigenda/addenda/modifications for its own act of omission/
mistake/lapse. The bid should ensure adoption of uniform specifications and standard for
good quality of the entire project.
In the tender document, it shall be clearly specified that order can be placed on one or more
LSTK contractor depending on the response for the bids.
5. Consultant shall invite bids from Indian/International bidders, conduct a pre-bid conference
with Oil and Gas Company’s participation, specify criteria for evaluation, perform bid
evaluation in all respects such as technical, financial, contractual, legal matters, submit a
bid evaluation report with recommendation for the best bidders (based upon a pre-
determined evaluation system approved by Oil and Gas Companies, participate and assist
owner in negotiations, prepare and print the final contract documents.
6. The commercial conditions to be included in the tender documents shall be provided by the
Oil and Gas Companies
7. The Consultant shall include a clause in LSTK bid that the LSTK contractor shall adhere to
design control exactly as per the standards. He should submit required records of evidence
for review of owner as and when required and shall carry out changes based on the Oil and
Gas Company’s review
8. The Consultant shall compile entire technical aspects of tender document including
minimum competency requirements and submit to oil industry (BPCL) for releasing the
tender.
Page 49 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
9. Upon getting of the offers, oil industry shall forward the entire documents to the Consultant
for their findings and technical evaluation of the bids received.
10. Consultant shall undertake the following jobs during the process of award of LSTK
Work (s):
Organize pre-bid meetings with pre-qualified bidders and respond to all the queries
raised by the bidders before the due date of opening of the tender.
Prepare technical commercial addenda points including issuance to the bidders for
compliance
Evaluate techno commercial bids, price bids along with Oil and Gas Companies.
Furnish final recommendations to the Oil and Gas Companies regarding Award of
work
Upon opening of the price bid, the consultant shall prepare a comparative statement
of the bidders and submit their final recommendation to Oil and Gas Companies
Furnish the cost estimates along with relevant document for LSTK Contract(s) for
Management Investment approval of the Oil and Gas Industries
11. Consultant shall perform the following jobs in the event of off-loading of LSTK contactor:
Perform all the jobs arising out of any off-loading of LSTK/other Contractor (s) viz.
issue of termination/ other notices to LSTK, re tendering for lining up fresh agency,
etc.
Perform all jobs related to any change orders/ addenda/ deviations including its
analysis, recommendation with proper justification and obtain approval form the Oil
and Gas Companies before issue
Page 50 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
PHASE -3
1. Detailed philosophy, process flow on execution of ERC and after execution operating, managing
and maintaining the ERCs for 10 years.
The Consultant scope shall include Post LSTK -Award Engineering Services viz.
Datasheets approval, QAP approval, Approval of design calculations, drawings approval,
Design philosophy preparation and approval. Any technical queries raised by LSTK
contractor during the contract execution shall be referred to the Consultant for clarification
and response.
The Consultant shall assist the Oil and Gas Marketing Companies in getting all statutory
clearances.
Liasioning and cooperation with all stake holders which shall include LSTK contractors,
other
Contractors, vendors, suppliers, agencies among others and expediting the project activities
with the stake holders
The Consultant shall also assist the Oil & Gas Companies in LSTK Contractors
performance of contract through Project Management & Monthly review meetings.
The Oil and Gas companies shall appoint third party for equipments pre dispatch Inspection
& expediting services within India and Abroad. Consultant’s services if required for issues
arising out of inspections shall be required to attend the meeting.
The Consultant shall lead the Commissioning team; provide assistance during pre-
commissioning, commissioning and start-up of the ERCs and provide training to the
Owner's personnel in operation, maintenance etc. Also after training, conduct one
successful mock drill outside each ERC premises at a location as decided by OGMCs. The
performance of the equipments used in the mock drill shall be compared with the design
parameters of the equipment. In case the performance does not meet the requirement
corrective action including replacement shall be made by the consultant at no risk and cost
to the OGMC. In this Mock drill all personnel from other ERC/OGMCs shall be assembled
at the Mock drill location.
Consultant’s services if required at different stages of work as per scope given above shall be
required to attend the meeting
Page 51 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
2) Construction Management
PROJECT MANAGEMENT
Consultant shall be responsible for management of Project activities covering but not limited to
the following:
Planning, Organizing, Monitoring & Control
Liasioning and cooperation with all stake holders which shall include LSTK
contractors, other contractors, vendors, suppliers, agencies among others and expediting
the project
activities with the stake holders .
Project Scheduling, Reviewing the progress of work and suggest Recovery plans in case
of any anticipated delays and enforce the same at site for timely completion of project.
Prepare and implement the overall Quality assurance plan for the project for
procurement & construction, engineering.
Coordinate the design and engineering of all project facilities and clearly define
contractor's scope of work to eliminate any subsequent change order.
Page 52 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
Check, verify, evaluate & recommend the Change Orders, if any, in various contracts
including Cost analysis.
Expediting
Review of technical deviations, cost analysis and recommendation to the Oil and Gas
Companies
Furnishing daily/ weekly/ monthly progress report to HQ of Oil and Gas Companies
and site in the format approved by the Oil and Gas Companies.
Liaison with Oil and Gas Company (Site) and Oil and Gas Company (HQ) on day today
matters.
Reconciliation of spares & other left over materials & handing over.
Active participation to liquidate the check list, punch list during commissioning.
Page 53 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
Consultant to plan, initiate, guide, coordinate, supervise and control the entire
Project implementation activities through a team headed by Project Manager and
Engineer/s (both based in India only) at each ERC location. The project team shall
be capable of handling various aspects of the Project such as, engineering, contracts,
purchase, inspection, construction, commissioning etc. The team will be headed by
a dynamic and competent Project Manager with proven ability in managing such
large projects.
Project Manager along with the team shall monitor the various milestone of the
project, update the project schedules considering the base line of the project and
project activities at site. The frequency of Updation of project schedule charts will
be advised by Owner to the successful bidder.
Mid-course changes are expensive and therefore, tendency for changes must be
resisted, unless the selected design is unsafe, unworkable or uneconomical.
All coordination and communications for the Project will be carried out under the
overall guidance and control of CONSULTANT’s Project Manager. Co-ordination
and communication procedures will be developed by CONSULTANT soon after its
appointment, in consultation with Owner.
Page 54 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
The CONSULTANT shall not be allowed to bid for any LSTK Contracts including
Supply Contracts for the Project. The CONSULTANT shall not undertake any
activity, which is to be performed directly/ indirectly by the Contractors/ Suppliers
and is the direct/ indirect responsibility of the Contractors/ Suppliers.
The list of major milestone to be considered for this project is listed in the
document. This has to be furthered detailed by CONSULTANT and to be approved
by OWNER.
b. Identifying the critical activities and its close monitoring to adhere to the overall
project schedule.
c. Preparation of bar chart schedule covering all concerned activities keeping with the
overall project schedule.
e. Preparation of major milestones for the entire project including that of LSTK works.
i. Suggest catch up plan to bring back the project on schedule, if delayed and
furnish weekly report of progress.
j. Ensure the Project schedule submitted by LSTK Contractor(s) is based on their own
schedule to achieve the target completion date in time.
Consultant / Project Manager shall be responsible for Quality Assurance & Quality Control
activities throughout the project implementation and commissioning.
a) Preparing and updating QA/QC report for the entire project on a regular basis
identifying areas for corrective action by concerned agencies and implementing the
same.
b) Preparing detailed scope and stages of inspection for all procurement items viz.
equipment and other materials.
Establishing of project control system to control, monitor and report to the OWNER by
LSTK Contractors.
a. Providing an effective, continuous liaison and control both at site and design office of
the LSTK contractors to ensure prevention of slippage in project schedule.
c. Study, analyze, review, check, certify and recommend to OWNER any change orders,
claims, additions/deletions in the LSTK contractors during the project execution.
e. Ensure all drawings prepared by successful LSTK bidder will conform to statutory
regulations and standards.
f. Checking, certifying and recommending the billing break-up/ billing schedule furnished
by LSTK Contractors.
h. Review EPCC / LSTK contractors site organization chart and ensure that allocation of
number and type of manpower and other resources including construction equipment
for the execution of work is adequate and in safe working condition.
j. Certifying the LSTK Contractors’ documents, invoices, and bills of the supplies and/or
works as the case may be to enable the OWNER to release the payment to the LSTK
Contractors as per respective billing schedule and Oil and Gas Company’s procedure.
Page 57 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
I. Final project cost variations from approved project cost estimates and
justifications for the same.
II. Delays in completion schedule, if any, and reasons for the same.
ii) If the approval of a drawings or documents or other proposal(s) is not granted by the
within 3(three)/ 7 (seven) working days from the date of submission by the LSTK
Contractor, such drawings or documents or other proposal(s) will be deemed to have
been approved by the CONSULTANT/ Project Manager. Full responsibility of
quality and/or correctness of the job carried out using such drawings or documents or
other proposal(s) shall rest with the CONSULTANT/ Project Manager.
iii) For drawings / documents the updated consolidated status indicating their submission,
review & approval etc should be made available to OWNER through electronic mail.
All drawings shall be properly signed & stamped with type of approval for
identification.
iv) Review/ Approval of PR (Purchase Requisition) prepared in respect of all material to
be supplied by respective LSTK contractors.
H) ARCHIVES MANAGEMENT
Page 58 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
I) FAULTY ENGINEERING
In the event of faulty or defective Design, Drawing, Engineering Design Basis and/or
review of detailed Engineering of the Unit/ equipment and/or faulty approval of
design(s), drawing(s) and specifications, including error or omission in the technical
services or studies done, undertaken or performed by CONSULTANT within the scope of
Work , CONSULTANT shall promptly and at its own cost and initiative carry out and
undertake corrective studies, design(s), drawing(s) and engineering as may be necessary
to rectify the fault or defect without any additional cost to the OWNER. However, no
such liability shall lie after expiry of Defect Liability Period.
J) PERFORMANCE GUARANTEE
The CONSULTANT shall be responsible for performance guarantees in terms of quality
and rated capacity of each equipment as relate to or depend upon or arise out of any
Design, drawings and/ or specifications furnished or approved by the CONSULTANT and
to detailed Engineering or other work performed, done or approved by the
CONSULTANT. The guarantees shall also cover mechanical performance guarantees for
related equipment efficiencies and their performance as laid down in the technical details.
The guarantee shall also cover performance of the measurement and control systems as a
whole. Failure to meet the performance guarantees, including under-performance of any
equipment shall, subject to the provisions of clause “I” hereof, be made good by the
CONSULTANT by alteration, replacement or repair (including hook-up, testing and
commissioning) as necessary at no extra cost to the OWNER., the CONSULTANT shall
conduct all activities necessary for collecting required data during test runs and mock drill
of the equipment/ facilities to identify problems of non-performance for further analysis
and modifications required to meet the parameters.
If the performance guarantees as per Section J above are not met during any Performance
Guarantee Test(s) and Mock drill CONSULTANT may recommend to OWNER items of
redesign, change or modification of the equipment (s) or operating conditions. Any such
design change/modification /change in operating condition shall be subject to owner
approval. CONSULTANT will, at its own expense, provide corrective engineering
designs to effect such redesign, change or modification, if the reasons for the same are
attributable to the CONSULTANT or attributable to the LSTK contractor or any other
contractor.
If the OWNER agrees to incorporate the items of redesign, change or modification
suggested by CONSULTANT, the Performance Guarantee Tests and Mock drill shall be
repeated after incorporation of such changes or modifications
Page 59 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
2 CONSTRUCTION MANAGEMENT
CONSULTANT through its Project Team will be responsible for effective monitoring of
all construction areas of the Project. 100% coverage of the jobs at construction site shall
be provided by the CONSULTANT irrespective of working hours & number of
CONSULTANT’s personnel required for the same. Accordingly, it will establish
requisite site organization staffed by competent and experienced specialists. Requisite
number of specialized personnel shall be provided to site, as and when necessary with
prior approval of the OWNER. Before mobilizing site personnel, CONSULTANT shall
submit the detailed CV of such person proposed to be posted at site, to OWNER for
concurrence and approval. The specialized personnel proposed to be deputed at site shall
be well qualified, highly experienced and capable of handling their respective activities
independently and shall meet all the requirements & responsibilities of the
CONSULTANT described hereunder collectively. Personnel proposed to be deployed at
site shall be on the rolls of the CONSULTANT. Should the performance of such
personnel be found unsatisfactory by OWNER during the EPCC phase, replacement of
such personnel shall be carried out by CONSULTANT within 15 days of notification by
the OWNER. Any concurrence / approval of OWNER does not relieve CONSULTANT
for his responsibilities and all the liabilities to this effect shall be of the CONSULTANT.
Consultant will be responsible for effecting various construction activities are completed
as per tender specifications, quality criteria, within the agreed time schedule. For this
purpose Project Manager will act as overall Engineer-in-Charge at site and would
therefore coordinate with all LSTK Contractors & OWNER for effective
enabling/interfacing functions.
Page 60 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
ii. Review site mobilization plan of LSTK Contractor and pursue for required mobilization
for all manpower/resources/equipment etc.
iii. Monitor LSTK contractor's work schedule, progress against program and review of
monthly progress/exception reports highlighting percentage completion of work, areas
of concern with respect of schedule/inputs to be deployed and recommend corrective
actions and remedial measures to remove back log in progress.
iv. Review the construction work / progress regularly to ensure that the LSTK Contractor's
allocation of number and type of manpower is adequate, and to ensure that construction
equipment, cranes, tools, scaffolding, lighting etc. for the execution of the work are
adequate and in safe working condition.
v. Verify the actual work completed by the LSTK Contractors and recommend to the
respective oil and Gas company for release of each progress payment according to the
contract.
vi. Regular updating of own schedule based on the actual jobs at site.
vii. Adherence to health and safety factors as well as environmental protection measures
viii. Obtaining of all necessary Statutory approvals for operation of construction related
equipment (e.g., for movement of heavy equipment on roads and across railway
crossings). Also, seeking of customs approvals for bringing in heavy construction
machinery (like cranes, etc.) from abroad and taking them back
Page 61 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
i. Review the construction quality assurance plans prepared by the LSTK Contractors to
ensure that it covers as a minimum the areas as under and confirm their compliance to
approved codes/ standards/ specifications, etc.
ii) Monitor compliance of various statutory rules, regulations and safety measures and cause
LSTK Contractor to arrange and co-ordinate site inspection, testing etc. as required under
local statutory rules and regulations prevalent in India.
iii) Cause LSTK Contractors to take all necessary precautions to protect construction
work and material from damage by climate, outside elements and construction
activities.
iv) Review safety procedures prepared by the LSTK Contractors for compliance with
applicable codes, regulations and OWNER requirements and monitor the compliance.
v) Ensure that the LSTK Contractors perform house-keeping activities which include
removal of excess materials/temporary facilities, scaffolding, as necessary.
vi) Conduct periodic Quality, Safety & Technical Audits to identify the LSTK
Contractors work that may be unsatisfactory in quality, and/or is not conforming to
the contract.
vii) Ensure LSTK Contractors to take immediate appropriate corrective actions as & when
such discrepancy arises to fulfill quality, safety obligations.
b. The contractors will not proceed beyond identified witness tests and hold points without
Project manager's clearance. Construction schedules shall allow a reasonable time for
inspection, as required.
Page 62 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
e. All material handling equipment should be subjected to required load test, initially and
then periodically, to ensure safe/stable operation including witnessing and maintaining
record of all such tests.
f. Review the results of all field inspections and tests carried out by LSTK Contractors that
are necessary to comply with the Project specification.
g. Ensure that the inspector engaged by LSTK Contractors for carrying out radiographic
inspection and interpretation of radiographs of welds is well qualified and acceptable to
perform the tasks and monitor the works performed by them regularly.
i. Witness Hydro-test, Pneumatic and other field tests for Mechanical, Electrical and
Instrumentation items.
j. Witness review, analyze and certify all proof of proper construction provided by the
LSTK/ other contractors to ensure compliance with the Project specifications.
k. Witness and certify the final inspections of equipment by the LSTK Contractor(s)/ other
contractors.
l. Ensure that all inspection reports and files with proper cross identification with field
materials are handed over to OWNER within one (1) month after completion of
Mechanical Completion of any part of the Project.
m. Any other work required to ensure construction quality as envisaged in the design/
specification.
Page 63 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
n. Consultant shall carry out a Construction Quality Audit of the project facility every three
months during construction phase of the project
E. COMMISSIONING
The Consultant will undertake the following jobs:
a) Preparation of check list of all testing required with startup schedule
b) Supervision of all activities for commissioning and testing of various equipment
c) Development of criteria for initial and final acceptance
d) Interpretation and measurement of tests
Obligations of Oil and Gas Companies
1) Oil and Gas Companies shall assist in holding interactions with various agencies, if
required
2) Oil and Gas Companies shall provide the details of site/s
PAYMENT TERMS
1. For Item no 1: The bidder has to quote Lump sum rate for preparation of Detailed Feasibility
individually for all 5 OGMCs.
2. For Item no 2: The bidder has to quote Lump sum rate for preparation of LSTK tender
document, tendering, bid evaluation and Techno Commercial recommendations.
3. For Item no 3: The Lumpsum quoted price shall consists prices for Project Management
Consultancy services excluding site supervision during the implementation and commissioning
phase .
The fixed Lumpsum prices and other rates set forth herein shall be inclusive of:
i) All costs related to project consultancy , design, engineering and attending all meetings in
India with OWNER (whether at OWNER’s premises; Owner’s nominated location or
CONSULTANT’s premises and any other location applicable prior to and/or during LSTK
phase of the project), inspection, testing and quality assurance/ quality control of the
Work, as more particularly described in the Scope of Work, or elsewhere in the Contract;
(Inspection & Testing in this context implies witnessing, checking, verifying of Inspection
& Testing of works performed by LSTK Contractors at site).
ii) The cost of all CONSULTANT’s personnel excluding Project Team ( Project Manager and
one Engineer), (including but not limited to wages, benefits, payroll, taxes, travel and
accommodation expenses, and other costs thereto as are paid to employees), all office
Page 64 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
iii) The cost of all travel and related expenses undertaken by the CONSULTANT’s personnel
posted at site for the performance of CONSULTANT’s services towards the construction
supervision & start up/ commissioning assistance.
iv) The cost of royalties, license fee and other fees, duties, penalties and damages whatsoever
payable for or in respect of any patented goods, materials, equipment or processes being
employed by CONSULTANT in or relative to the performance to the performance of the
work and/or for acquisition or use of any right, license, consent or other privileges required
by the CONSULTANT for or relative to the performance of the work.
v) The cost of all guarantees, indemnities to the OWNER and insurance premium required in
terms of the Contract or under any law, rule or regulation or otherwise CONSULTANT
deems fit to take out and the cost of all risks whatsoever (foreseen and unforeseen)
including, but not limited to the risk to delay or reduction or increase in the Scope of Work
and/or cancellation of contract and/or accidents, strikes, civil commotion, labour trouble,
third party breach, fire, lightening, inclement weather, storm, tempest, flood, earth quake
and other acts of God, restriction of dislocation of road/rail and other transport for access,
suspension of work and sabotage.
4. For Item no 4: The Man month rate quoted shall consist of site supervision charges during the
implementation and commissioning phase. The payment will be done on actual basis.
i) For site works Consultant shall deploy minimum 1 Project Manager and 1 Engineer (in
phases) of required disciplines as per the qualifications and experience given in the clause
6 of payment terms. Consultant should provide the deployment schedule of manpower at
office and site in the un-priced bid.
ii) CONSULTANT has to provide sufficient manpower of required discipline at site for
meeting the timelines and shall also be responsible for expediting the jobs to be carried
out at site which may require regular follow-ups with contractors/sun contractors/vendor
at site or outside site
iii) Bidder to provide the organization structure of the proposed manpower to be deployed at
site for site supervision with engineer/s and their disciplines. Bidder to note that if any
Page 65 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
time during the project OGMC notes that sufficient Engineer/s of required discipline are
not deployed at site for progress to be expedited, then CONSULTANT has to place the
Engineer (of required discipline) as advised by OGMC to meet the timelines at no extra
cost to OGMC
Organization structure should have the key list of people along with technical bid giving
qualification, experience.
5. Payment Terms:
Note: For item no.1& 2 Payment will be made on Prorated basis for each ERC.
For item no 3
%age break
Milesto Description of Milestones. Break up of lumpsum price for
up of
ne No. services after award of LSTK contracts
lumpsum
7 Review of Detailed Engineering and approval of Drawings 25
8 Procurement Services 20
9 Project Monitoring Services 15
10 Certification of Documents/drawings submission by LSTK 5
11 Mechanical Completion 15
12 Commissioning 15
13 Completion of CONSULTANT’s Services in all respects 5
TOTAL 100
Page 66 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
Further detailed break-up of the Milestones listed above for item no 3 and respective payment
percentage shall be done in collaboration with the successful bidder.
Note: For item no. 3 and 4: Billing cycle will be once in a month
Project Manager
Project Manager will be responsible for supervision/co-ordination/ Project Management
with technical and construction team during construction and commissioning phase. He
should have Bachelors degree in Engineering and excellent knowledge of construction
related issues and good supervisory & leadership skills. Project Manager should have
minimum of Fifteen (15) years experience in Oil and Gas projects.
Page 67 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
COMPLETION PERIOD
Page 68 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
SECTION -5
Page 69 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
Except as otherwise expressly provided or unless the context otherwise requires, in this Contract,
the following terms shall have the meanings set forth below:
"Acceptance of the Work" or Provisional Acceptance “shall mean acceptance by Owner of the
Consultants Work in accordance with the provisions of Article 11.
"Affiliate" means with respect to any Person, any other Person controlling, controlled by or under
common control with such Person. In this context "control" means ownership of fifty per cent
(50%) or more of the voting securities or equivalent interest of a Person.
"Approval" means approval in writing by an authorized signatory of Owner or Consultant (as the
case may be), and "approve" or "approved" shall be construed accordingly.
"Approved Subcontractors" means subcontractors approved pursuant to Article 22.1 including,
without limitation, Subcontractors listed in Exhibit 5.
"Certificate of Acceptance" means the Certificate referred to in Article 11.1 to be issued by the
Owner in respect of the Work.
"Consultant" means collectively, a corporation established under the laws of origin country, and its
respective successors-in-interest and permitted assigns.
"Consultant's Personnel" means all directors, officers, employees and other personnel of
Consultant.
"Contract Price" means the lump sum fixed price described in Article 7.1, payable by Owner to
Consultant in consideration of performing the Work, in accordance with the terms, conditions and
provisions of this Contract.
More definitions and interpretations have been included in Chapter III on Definitions and
Interpretations.
ARTICLE 2:
CONSULTANT'S WORK AND RESPONSIBILITIES:
Page 70 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
2.3 Special Requirements. Consultant shall comply with the project control requirements, the
quality assurance requirements, the health, safety and environmental requirements contained in and
the document control requirements.
ARTICLE 3:
SCHEDULE OF WORK:
3.1 Commencement of Work. Consultant shall commence the Work promptly upon the
Effective Date, and shall thereafter perform its obligations pursuant to this Contract in
accordance with the Schedule of Work. Time is of the essence and Consultant recognizes
the importance to Owner of the completion of the Work in accordance with the Schedule of
Work.
3.2 Work Program. Within 15 days after the Notification of Award of Contract, Consultant
shall submit to Owner for approval a detailed program showing how Consultant proposes to
perform the Work in accordance with the Schedule of Work.
3.3 Approval of Program. Owner shall, within 15 days of receipt of such program, notify
Consultant in writing that:
Page 71 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
approval of such detailed program, Consultant shall comply therewith, provided that such
program may thereafter be modified with Owner's prior, written consent.
3.4 Priority of Work. Consultant shall give the Work the high priority, and no other work of
Consultant shall take precedence over the Work, nor shall Consultant make any allocation
of its resources which would have the effect of delaying the timely performance of the
Work.
3.5 Maintenance of Schedule of Work. If Consultant is not performing the Work at a rate which
will maintain the Schedule of Work, Consultant shall, at its expense and without
entitlement to any additional compensation, cause Consultant's Personnel to work such
overtime and shall furnish such additional personnel and other resources and Materials as
may be required to comply with the Schedule of Work.
3.6 Adjustments of Schedule of Work. The Schedule of Work shall be adjusted only
ARTICLE 4:
CONSULTANT'S ACCEPTANCE OF THE WORK:
4.1 Acceptance of the Work. Consultant acknowledges that it has entered
into this Contract for the considerations set forth herein and that Consultant has carefully
examined and satisfied itself in respect of all pertinent matters which may bear upon the
performance of the Work, the calculation of the Contract Price and the determination of the
Schedule of Work and all other pertinent matters and conditions.
ARTICLE 5:
STANDARDS OF PERFORMANCE:
In performing the Work, Consultant shall conform in all respects to the standards of performance
hereinafter set forth.
5.1 Professional Performance. Consultant shall perform the Work in a
professional manner, using sound engineering and design principles and management and
supervisory procedures, and in accordance with the highest standards of care employed by
leading international engineering firms in the petroleum refining industry. Consultant
represents that it has the required skills and capacity to perform the Work in the foregoing
manner.
the Work to conform to the requirements of this Contract, including the Scope of
Work.
5.2.2 Documents, Drawings and Manuals. Consultant shall submit to Owner for approval,
within the time periods specified in this Contract, or in the absence of any specified
periods, within periods mutually agreed between Owner and Consultant and if
mutual agreement is not reached with the periods specified by Owner, such designs,
drawings, patterns, models and manuals as may be specified in this Contract, or as
may be reasonably required in order to enable Owner to approve the Work. Owner
shall signify its approval or disapproval in accordance with Article 6.4. Consultant
shall be responsible for any discrepancies, errors, or omissions in the documents and
other particulars supplied by it whether or not such documents and particulars have
been approved by Owner. Consultant shall not depart from the approved drawings,
samples, patterns, models or manuals except as directed in writing by Owner.
Consultant also agrees that all design criteria, codes and standards included in this Contract, are
and at all times prior to the Final Acceptance of the Work will be in compliance with the
requirements of such authorities.
Page 73 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
Page 74 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
written notice of any suit or action filed against Consultant arising out of the
performance of the Work, and of any claim against Consultant which if paid could
result in a claim by Consultant for indemnification or for which insurance coverage
is not in effect or which will be in an amount which exceeds the amount of
insurance coverage. Consultant shall promptly furnish to Owner copies of all papers
received by Consultant pertinent to any such suit or action.
5.8.2 Owner's Right to Defend. If requested by Owner, Consultant
shall do any and all things necessary or appropriate to effect an assignment and
subrogation in favor of Owner of all Consultant's rights and claims, except against
Owner, arising from or growing out of any suit, action or claim referred to in Article
5.8.1, and shall authorize Owner or Owner's designated representatives to exercise
any such rights to settle or defend any such claims or take charge of any such
litigation affecting Consultant. In the event of such a request by Owner, Owner
shall, subject to and in accordance with Article 8.2, reimburse Consultant for the
costs of such litigation incurred by Consultant, if any, including judgments,
settlements, and court costs and, if Owner does not retain its own counsel,
reasonable attorney's fees.
5.8.3 Provision in Subcontracts. Consultant shall cause a provision similar to this Article
5.8 to be inserted in all of its subcontracts.
5.9 Conflicts of Interest; Commission Payments.
ARTICLE 6:
OWNER'S RESPONSIBILITIES:
6.1 Owner For the purposes of this Contract, “Owner” or “COMPANY” means BHARAT
PETROLEUM CORPORATION LIMITED (BPCL), an Indian Company having
Registered Office at BHARAT BHAVAN, 4 & 6 CURRIMBHOY ROAD,, BALLARD
ESTATE, Mumbai - 400001 and respective successors - in - interest and permitted assigns.
6.2 Owner's Representative Upon execution of this Contract, Owner shall designate a
representative ("Owner's Representative") who shall be appointed to represent Owner under
this Contract and notice given to and received from Owner's Representative shall have the
same effect as if given to or received from Owner. Owner shall notify Consultant of the
designation of the Owner's Representative by delivering to Consultant a letter naming such
person or any replacement. Except as expressly stated in this Contract, the Owner's
Representative shall have no authority to relieve the Consultant of any of its duties,
obligations, liabilities or responsibilities under this Contract.
6.3 Delegation With the prior, written approval of Owner, Owner's Representative may, from
time to time, delegate any of his duties to assistants, and may at any time revoke any such
delegation.
6.4 Approvals Owner shall expeditiously review and, where appropriate, approve all drawings,
specifications, proposals and requests submitted by Consultant pursuant to this Contract.
Except as expressly otherwise specified elsewhere in this Contract, Owner shall approve
within 45 working days of receipt of any such submission, in the case of submissions
requiring action by governmental agencies or committees, and within 15 working days of
receipt of any such submission, in the case of submissions requiring action by Owner only.
If no approval is given in the case of a submission requiring action by Owner only, a note
of the reasons for such non-approval shall be provided. In case no written advice, comment
or instruction is received by Consultant within such periods, or within any periods for
review and approval stated elsewhere in this Contract, each submission for approval shall
be considered approved
Page 76 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
6.5 Information as to Local Law If requested to do so, Owner will provide reasonable
assistance to Consultant in obtaining information relating to laws, regulations and
ordinances, including safety regulations, in India and applicable to the performance of
Consultant's obligations hereunder.
6.6 Permits and Licenses Owner shall obtain and maintain any registrations, licenses (including
import licenses for the Work), and permits which are required by any applicable Indian
laws or regulations and which are required to be in the name of Owner or its employees or
agents.
6.8 Additional Responsibilities. Owner shall be responsible for the matters if specifically
brought out and agreed elsewhere in the tender.
ARTICLE 7:
7.1 Contract Price. A breakdown of the Contract Price shall be arrived on the basis of milestone
for Item. In consideration of Consultant's agreeing to perform the Work in accordance with
this Contract, Owner shall pay to Consultant the Contract Price on a fixed price, lump sum
basis. The Contract Price shall be adjusted only in accordance with Article 8.2.
7.2 Amounts Included in the Contract Price. The Contract Price set forth in this Contract for all
items shall be inclusive, without limitation, of all costs, risk and expense, overhead, profit
and/or fees related to the satisfactory performance and completion of the Work except
service tax which shall be applicable extra as per Govt. Norms. The contract prices shall
include any and all costs related to management, design, engineering. Said lump sum prices
and other rates mentioned in Article 7.1 above shall include, but not be limited to, the costs
of all management, (including, but not limited to, wages, benefits, payroll, taxes, travel
expenses, and other costs related thereto as are paid to employees), all equipment, rental of
third party equipment, communications equipment, communications charges (including
those incurred by Owner while in Consultant's offices during visits), general administrative
costs of Consultant's operation (including travel, lodging, boarding, transport facility,
offices) all reproduction and graphics costs of whatever kind, stationery, postage and
courier expenses, all insurance requirements and coverage, and financing, and all other
costs or expenses of any type or kind whatsoever which directly or indirectly relate to
accomplishing the Work and complying in full with the provisions of the Contract, and
which are not otherwise set forth or referred to in the Contract as a reimbursable expense.
All downtime due to weather and mechanical breakdown of the consultants equipment shall
be to Consultant's account and is deemed to be included in the said fixed lump sum prices
and other rates mentioned in Article 7.1 above. Excluded from the above is mechanical
breakdown, failure or any other delay arising from another Contractor on the Owner.
Page 77 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
As per prevailing Service tax regulations, OWNER is expected to pay service tax for quoted
services availed from Foreign Service provider and will be borne by the OWNER
7.3.2 Owner's Right to Withhold. Owner may withhold or deduct from the payment of any
amount otherwise payable to Consultant under this Contract, or pay on Consultant's behalf,
such taxes and other sums, if any, as Owner may be required to withhold, deduct and/or pay
under the laws of any jurisdiction in India or outside India or of any political subdivision or
taxing authority or agency thereof, including but not limited to the income tax on the
income accruing or arising or deemed to accrue or arise in India.
ARTICLE 8:
PAYMENT
(i) Only the charges of Owner’s Bank in India shall be to Owner’s account. All
other Bank charges including those in Bidder’s country shall be to Bidder’s
account.
(ii) All payments shall be made in the Currency quoted.
Page 79 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
(iii) No Interest charges for delay in payments, if any, shall be payable by the
Owner.
(iv) No variation in payment terms shall be accepted for Foreign Bidders and
deviation from above will make their bid NON-RESPONSIVE.
8.2.1 Reimbursable Costs: Consultant shall not be entitled to any adjustment of the Contract
Price to be paid pursuant to Article 8.1
8.2.2 Calculation of Cost: Such costs shall be calculated by
reference to the breakdown of prices or if in Owner's opinion there is no applicable
price, on the basis of actual cost to Consultant. Owner’s opinion in this regard shall
be final and binding on the Consultant.
8.2.3 Submission of Invoice: Consultant shall submit to Owner an
invoice stating the amount for payment against certified Milestones as per Article
8.1.1.
8.2.4 Payment of Invoice: Owner shall pay the invoice submitted by Consultant pursuant
to Article 8.2.3 within 15 days after receipt of certified bills at Disbursement
Section at Mumbai; provided, however, that if any item on such invoice is disputed
by Owner, Owner shall promptly notify Consultant as to such item, the amount
thereof, and the reasons why such item is being disputed, and Owner may deduct
the amount thereof from such invoice pending resolution of the matter, but shall pay
the undisputed items on such invoice in accordance with the provisions of this
Article 8.2.4.
8.2.5 Future variations in Taxes: Variations of taxes and duties arising out of the
amendments to the Central / State enactments, in respect of services covered under
this bid shall be to BPCL.s account, so long as :
• They relate to the period after the opening of the un-price bid, but before the
contracted completion period (excluding permitted extensions due to delay on
account of the consultant, if any) or the actual completion period, whichever is
earlier; and
• The vendor furnishes documentary evidence of incurrence of such variations, in
addition to the invoices/documents for claiming Cenvat /Input Tax credit,
service tax, wherever applicable. The adjustment will be effected on pro rata
basis, however no adjustment in Contract Price shall be made for any variation
in direct taxes (Corporate Tax, Income Tax, Withholding Tax etc.).
Consultant as aforesaid, provided that, once all acts necessary to initiate the relevant
wire transfer have been completed within the time specified for such payment, any
delays within the international or domestic banking system in the transfer of such
payments to Consultant's account or accounts as aforesaid shall not give rise to a
claim that Owner has breached its payment obligations hereunder. If funds are not
received in the account or accounts designated by Consultant, Owner will furnish
upon Consultant's written request, documentary substantiation that all acts necessary
to initiate the transfer of such funds have been taken by Owner's bank or banks. All
costs associated with such wire transfer and incurred in India shall be on Owner's
account, and all other costs shall be on Consultant's account.
8.4.2 Currencies All appropriations for invoices submitted for payment pursuant to this
Article, and all payments by Owner to Consultant shall be made in INR.
8.4.3 Effect of Payment The making of any payment shall in no event
constitute the acceptance by Owner of any Work performed by
Consultant pursuant to this Contract.
ARTICLE 9 :
CHANGES :
9.1 Changes Consultant agrees to effect such changes in the Work as Owner may, from time to
time, request. Any request by Owner for a change shall be delivered to Consultant in
writing and shall be sufficiently definite and detailed to give Consultant an adequate basis
on which to prepare a preliminary change order pursuant to Article 9.2. Throughout the
performance of the Work, Consultant shall have a continuing obligation to propose to
Owner for Owner's consideration:
(a) all such changes as Consultant considers desirable including, any change
which in the Consultant's opinion will reduce the cost of the Work, or
improve the efficiency or value to Owner, or may otherwise be of benefit to
Owner; and
(b) such other changes known to Consultant as may be necessary to incorporate
significant new developments in technology which are applicable or
appropriate to the Work. Consultant shall submit any such proposal in the
form of a preliminary change order, at its own cost. The preliminary change
order shall give all details, documents etc. mentioned in Article 9.2.
9.3 Change Orders Except as provided in Article 9.4, before Consultant deviates from the
Scope of Work or the Schedule of Work, or acts upon any preliminary change order, the
Page 81 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
Parties shall have executed, in advance, a written change order (which may be the
preliminary change order signed by both Parties), incorporating the changes in question and
providing for any change in any Milestone, Milestone Value, the Schedule of Work or other
dates or periods for completion, any agreed cost consequences and any change in the Scope
of Work, Consultant's standards of performance, General Warranties, the technical
soundness of the Work or other provisions of this Contract in each case resulting from the
change order. Any increased costs shall be paid by Owner to Consultant subject to and in
accordance with Article 8.2; provided, however, that except as provided in Article 9.4,
Owner shall not be liable to pay for any changes for which a written change order shall not
have been executed in advance by the Parties. If the change results in a reduction in
Consultant's costs the Contract Price shall be reduced accordingly. In calculating cost
adjustments under this Article 9, the prices set forth in Contract Price breakdown & Unit
Rates shall be used to the extent covered thereby, and actual costs of Consultant shall be
used for determining other costs. Any cost adjustment shall take into account, among other
things, the elimination or avoidance of Work to be performed resulting from the changes in
the Scope of Work and from assistance given by Owner.
9.4 Performance of Change Pending Agreement If Owner and Consultant fail to agree on the
cost effect of a change, or the effect on the Schedule of Work, or any of the other matters
referred to in Article 9.3, and as a result, a change order of the type referred to in Article 9.3
is not executed, Owner may nevertheless require Consultant to perform the Work as
changed by delivering to Consultant a change order signed by Owner, unless the aggregate
amount of increased costs as fixed by Owner involved in all disputed change orders would
thereupon exceed five percent (5%) of the Contract Price. Consultant's performance of the
Work as changed shall not prejudice either Party's position regarding the effects of such
change.
9.6 Non Allowable Changes The following shall not be considered under any circumstances as
changes in the Work, or within or to the Scope of Work or the Project management or the
Basic Design and Detailed Engineering, nor shall any of the following be taken into
account when calculating the cost consequences of changes pursuant to this Article 9, nor
shall any of the following of themselves be considered the basis for any adjustment
pursuant to this Article 9:
Page 82 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
ARTICLE 10 :
RIGHT TO INSPECT:
10.1 Inspection and Examination All management, design, development by
Consultant or for which Consultant is responsible, shall be subject during normal business
hours to inspection by Owner, Owner's Representative, or Owner's designated consultants
and/or other representatives, at any and all times during management, design and
development and at any and all places where such management, design and development
are carried on, provided such inspection shall, to the extent possible, be carried out in
conjunction with Consultant's similar activities and, if not, upon prior consultation with
Consultant in order to avoid any unreasonable delay in the performance of the Work. In
furtherance of the foregoing, Consultant shall arrange for Owner to have access to all places
where design and development are being carried out.
10.2 Rejection and Replacement Owner and it’s designated consultants and
representative shall have the right to reject any portion of the Work which is deficient, not
within specifications and shall be satisfactorily redone. For reasons solely attributable to
Consultant, the cost associated with such re-performance shall be on the sole account of
Consultant and not reimbursable. After completion of the necessary performance, the
relevant work shall be subject to further inspection and examination by Owner and its
designated consultants and representatives.
10.3 Consultant to Furnish Supplies and Services for Inspection Not applicable
ARTICLE 11:
ACCEPTANCE PROCEDURE:
from Consultant of each subsequent notice of completion of the Work, Owner shall advise
Consultant of any continuing or additional portions of the Work which remain to be
performed. Owner shall issue a Certificate of Acceptance of the Work (the "Certificate of
Acceptance"),
after the Work has been completed and accepted, and dated to reflect the actual date of
Acceptance of the Work. This procedure shall be applied for both Provisional & Final
Acceptance of the work
11.2 Conditions. The issue of the Certificate of Acceptance shall be conditional upon:
(i) legally effective releases, executed by Consultant and any persons claiming
by, through, under or against Consultant who might have an interest in the
Work or part thereof adverse to Owner, of all claims and liens against
Owner arising under or by virtue of this Contract, except such claims and
liens, if any, in such stated amounts which Consultant, with the written
consent of Owner, may exclude from the operation of such releases; and
(ii) Consultant's written declaration, together with such supporting documents as
Owner may reasonably require, that all claims and demands against, and
debts incurred by Consultant, in respect of this Contract, have been settled,
except claims excluded with the consent of Owner from the releases referred
to in the foregoing sub Article (i), and all taxes due and payable by
Consultant pursuant to Article 7 have been paid or otherwise provided for.
11.3 Discretion of Owner. Notwithstanding the foregoing, Owner, in its sole discretion, may
accept the Work at any time and issue a Certificate of Acceptance even if, after corrective
measures have been taken by Consultant, the Work as a whole does not satisfy the
requirements of this Contract. Such acceptance and such notice shall not relieve Consultant
of its obligations under this Contract unless:
(i) Owner fails to give Consultant access to the Work or part
thereof to effect the requested or required corrections within 60 calendar days of the
date Consultant makes written request therefore; and
(ii) Consultant is ready, willing and able to perform such corrections within such
period.
11.4 Costs of Corrections If Consultant is required to correct any defects or deficiencies in the
Work in connection with the issue of the Certificate of Acceptance of the Work pursuant to
this Article 11, or which result from a breach of Consultant's General Warranties or
otherwise in accordance with the terms of this Contract, the costs associated with the
correction of such defects or deficiencies shall be on the sole account of Consultant and
shall not be reimbursable.
ARTICLE 12:
GENERAL WARRANTIES:
12.1 General Warranties. Consultant warrants that
12.1.1 Personnel- All professional personnel of Consultant and
its Subcontractors shall have proper qualifications for the Work assigned to
them hereunder.
12.1.2 Standard of Care and Work Consultant and each Subcontractor shall perform
their obligations under this Contract in conformity with the highest
international standards.
Page 84 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
Page 85 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
ARTICLE 13:
EFFECT OF APPROVALS, ACCEPTANCE AND PAYMENT:
The obligations of Consultant hereunder shall not, except as expressly provided herein, be reduced
or affected by any inspection, test, approval or payment, whether preliminary or final, or by the
Certificate of Acceptance of the Work, it being agreed that the obligations of Consultant hereunder
shall continue until Final Acceptance of Work.
ARTICLE 14:
TITLE :
14.1 Title to Work. Consultant agrees that title to the Work or any part thereof shall pass to
Owner from Consultant upon commencement of the Work, or any portion thereof, by
Consultant. Consultant shall, however, retain care, custody, and control of the Work and
exercise due care thereof. Such transfer of title shall in no way affect Owner's rights under
any other provision of this Contract.
Page 86 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
14.3 Protection of Title. For the purpose of protecting Owner's interest in all Work with respect
to which title has passed to Owner but which remains in the possession of another party,
Consultant shall take or cause to be taken all steps necessary under the laws of the
appropriate jurisdictions to protect Owner's title and to protect Owner against claims by
other parties with respect thereto. If, after notice in writing from Owner and the lapse of a
reasonable time in which to obtain a discharge, Consultant fails to discharge, or, in a
manner acceptable to Owner, effectively to provide for such discharge or to secure Owner
against any Lien or claim upon the Work, arising from Consultant's or a Subcontractor's
performance of the Work, Owner shall have the right, at its option, upon notice in writing to
Consultant to provide by agreement, payment or otherwise for the discharge of such Lien or
claim. Consultant shall reimburse Owner for all amounts expended by Owner to obtain
such discharge, including all costs and attorneys' fees and expenses. Consultant shall cause
the Work to be suitably marked with an identifying mark or symbol indicating that the
Work is the property of Owner.
14.4 Ownership of Designs and Drawings. All designs, drawings, specifications, data, computer
printouts, programs and files, documents, reports, studies, manuals, programs, analysis and
all other items produced by Consultant or Subcontractors in the performance of the Work
(herein collectively referred to as the "Work Product"), shall become and remain the
property of Owner, and Consultant shall deliver the Work Product (properly sorted and
indexed), to Owner in accordance with the provisions of this Contract and in any event
upon termination of this Contract. The provisions of this Article 14.4 shall survive any
termination of this Contract.
ARTICLE 15:
PROPRIETARY INFORMATION; COMPUTER DATA; LICENSES AND INVENTIONS
15.1 Proprietary Information of Owner
15.1.1 Proprietary Information Defined. As used in this Article 15, "Proprietary
Information", shall mean all information which Consultant, directly or
indirectly, acquires from Owner or its Affiliates or from the performance of
the Work, or any other information concerning the technical and business
activities and know-how of Owner or its Affiliates, except information
falling into any of the following categories:
(a) Information which, prior to the time of disclosure
hereunder, is lawfully in the public domain;
(b) Information which, after disclosure hereunder, enters the public
domain, except where such entry is the result of Consultant's or a
Subcontractor's breach of this Contract;
(c) Information, other than that obtained from third parties which, prior
to disclosure hereunder, was already lawfully in Consultant's
possession either without limitation on disclosure to others or which
subsequently becomes free of such limitation;
(d) information obtained by Consultant from a third party who is
lawfully in possession of such information and not subject to a
contractual or fiduciary relationship to Owner or any of its Affiliates
with respect to said information; it being understood that Consultant
may use and disclose such information in accordance with the terms
under which it was provided by such third party; and
Page 87 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
15.3 Computer Data. Consultant undertakes to assure to Owner access to the computer programs
and computer data used by Consultant in the performance of the Work for use by or on
behalf of Owner for 2 years from the Acceptance of Work as a whole, and shall deliver
details of all computer programs underlying the development of technical data and the
technical reports generated with the respective programs used in the design along with
relevant supplemental information.
15.4 Licenses - On or before the date of the Certificate of Acceptance of the Work, Consultant
shall deliver or cause to be delivered to Owner, such licenses of all patents and other
proprietary rights held by Consultant, any Subcontractor, or any of their respective
Page 88 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
Affiliates as may be required for Owner in the optimal use of the Work in the manner
intended. Such licenses shall be in such form as shall be approved by Owner, shall be
perpetual, irrevocable, non-exclusive and royalty free to Owner, and shall permit the right
to grant sublicenses to any operator of the Setting up of ERC Project for the purposes of
operation thereof.
ARTICLE 16:
FRUSTRATION:
In the event of this Contract being frustrated whether by war or by any other supervening event
which may occur independently of the will of the Parties, the sum payable by the Owner to
Consultant shall be the same as that which would have been payable under Articles 19.3.2 (a) and
(b) if this Contract had been terminated in accordance with Article 19.1.3 or 19.2.2, provided that
this Contract shall not be frustrated by any of the events listed in Article 17.1.4.
ARTICLE 17:
FORCE MAJEURE AND EXTENSIONS OF TIME:
17.1 Force Majeure
17.1.1 Events of Force Majeure. For purposes of this Contract, "Event of Force
Majeure", shall mean, any circumstance not within the reasonable control of
the Party affected and which, despite the exercise of reasonable diligence,
such Party is unable to prevent, avoid or remove.
17.1.2 Effect of Force Majeure. Should any Event of Force Majeure prevent or
delay the performance by a Party of any of its obligations under this
Contract (other than a payment obligation when, as and if due hereunder)
then, provided that notice is given to the other Party in accordance with the
provisions of Article 17.1.5, the Party which is prevented or delayed in the
performance of its obligations, shall be excused from performance in
accordance with the time specified in this Contract, for so long as the
relevant Event of Force Majeure continues, and to the extent that such
Party's performance is prevented, hindered or delayed, such Party shall be
excused from performance of the obligations prevented, hindered or delayed
until the expiration of any extension of time agreed between the Parties or
granted to Consultant in accordance with Article 17.2.
17.1.3 Instances of Force Majeure. Events of Force Majeure shall include, without
limitation, but subject to the provisions of Articles 17.1.1 and 17.1.4, the
following:
(a) Acts of God;
(b) Acts of war or the public enemy whether war be declared or
not;
(c) Public disorders, insurrection, revolution, rebellion, sabotage,
riots or violent demonstrations;
(d) Explosions, fires, earthquakes, flood, cyclone, epidemic or
other natural calamities; and
(e) Strikes or lockouts or other industrial action by workers or
employees, other than Consultant's or any Subcontractor's
personnel, workers or employees.
Page 89 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
17.1.7 Costs During Force Majeure. In the event of an Event of Force Majeure,
each Party shall bear any costs incurred by it resulting there from.
Page 90 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
17.2.2 Certain Delays not excused. Consultant shall not be entitled to any extension
of time in respect of any delays caused directly or indirectly by any of the
following:
(a) Any default by Consultant; or
(b) Inclement weather conditions adversely affecting the progress of the
Work (including, without limitation, monsoon or other storm
conditions); or
(c) Any event which is not expressly provided for in article 17.2.1(a)
to (e) as a Relevant Event.
17.2.3 Mitigation of Delay. Consultant shall use and continue to use its best
endeavors to reschedule work activities to avoid or reduce the effects of any
Relevant Event upon achievement of each Milestone.
17.2.4 Notice. If Consultant wishes to pursue a claim for an extension of time,
Consultant shall, not later than 10 days after the commencement of the
Relevant Event in respect of which the extension of time is claimed, give
written notice (in addition to any other notice which may be required under
this Contract) to Owner, which:
(a) Gives full and detailed particulars of the cause of the delay;
(b) Specifies which of the Relevant Events listed in
Article 1 7.2.1(a)to (e) Consultant considers to be applicable;
(c) Gives the date on which the Relevant Event relied upon commenced,
and, if the Relevant Event has ceased, the date on which it ceased, or,
if the Relevant Event is continuing, the expected duration; and
(d) Gives full and detailed particulars of:
(i) The effect of any delay to date and of any further delay
which may reasonably be expected upon the Schedule of
Work; and
(ii) the measures which Consultant has adopted to date and/or
proposes to adopt or continue to adopt pursuant to Article
17.2.3 in order to minimize the effects of any delay to
date and of any future delay.
ARTICLE 18:
SUSPENSIONS:
18.1 Suspension. Owner may at any time, and from time to time, and for any reason, by written
notice to Consultant, suspend further performance of the Work. Any notice of suspension
shall specify the date of suspension and the estimated duration of the suspension. Upon the
date specified in any such notice of suspension, Consultant shall promptly suspend further
performance of the Work, and during the period of such suspension shall properly care for
and protect the Work including all design work in progress. Owner may, at any time,
terminate the suspension by written notice to Consultant specifying the effective date of
termination, and Consultant shall use its best efforts to resume performance of its
obligations pursuant to this Contract immediately upon receipt of such notice. If
Consultant's performance of the Work has been delayed as a result of such a suspension, the
Consultant shall be entitled to an extension of time in respect of relevant Milestone(s),
subject to and in accordance with Article 17.2.
ARTICLE 19:
TERMINATION:
19.1 Owner's Right to Terminate. Owner may terminate this Contract as follows:
19.1.1 Convenience. Owner may terminate this Contract for its convenience at any time and
without cause. In such event, Owner shall give Consultant not less than 30 days written
notice of its decision to terminate this Contract.
19.1.2 Phase 1 Basic Engineering / Phase 2 Recommendation of LSTK tender. Owner may
terminate this Contract upon the conclusion of the Phase 1 Basic Engineering / Phase 2
Recommendation of LSTK tender, or any part thereof. In such event, Owner shall give
Consultant not less than 30 days written notice of its decision to terminate this Contract as
aforesaid.
19.1.3 Force Majeure. If an Event of Force Majeure continues for more than 6 months after the
notice of the Event of Force Majeure is given or if the Event of Force Majeure has rendered
impossible the performance of this Contract, then Owner may terminate this Contract by
giving Consultant at least 30 days prior written notice of termination.
19.1.4 Default. If Consultant shall assign or transfer this Contract or any right or interest herein,
except as permitted under Article 28.2; or if the interest of Consultant shall devolve upon
any Person, entity or corporation otherwise than as herein permitted; or if Consultant shall
fail without cause to make timely payment for labor, services or Materials, or disregard
laws or ordinances or lawful requirements of any competent governmental authority, or
reasonable instructions of Owner related to quality and progress of Work; or if, except for
the reasons stated in Article 17.1, Consultant shall fail, neglect, refuse or be unable at any
Page 92 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
time during the course of the Work to perform the Work at a rate deemed sufficient by
Owner to give reasonable assurance that Consultant will complete the Work in accordance
with the Schedule of Work; or if Consultant otherwise commits a material breach of its
obligations under this Contract; and, in the case of any of the foregoing events, if capable of
remedy, Consultant fails to remedy such breach within 30 days after receiving written
notice thereof from Owner, Owner may terminate this Contract forthwith, by giving
Consultant written notice of such immediate termination.
19.1.5 Bankruptcy, Liquidation - If Consultant or any guarantor providing a Parent Company
Guarantee hereunder shall become voluntarily or involuntarily the subject of proceedings
under any bankruptcy or insolvency law, or other law or procedure for the relief of
financially distressed debtors, or is unable, or admits its inability, to pay its debts as they
mature, or takes or suffers any action for its liquidation or dissolution, or has a receiver or
liquidator appointed for all or any part of its assets except for the purposes of amalgamation
or reconstruction, Owner may terminate this Contract by giving Consultant written notice
of immediate termination. In the event that such notice is not given for any reason,
Consultant shall remain fully responsible for its obligations set forth in this Contract.
19.2 Consultant's Right to Terminate.
19.2.1Default - If Owner commits a material breach of its obligations under this Contract and fails
to remedy such breach within 60 days after receiving written notice thereof from
Consultant, Consultant may terminate this Contract by giving Owner written notice of
immediate termination.
19.2.2 Force Majeure. If an Event of Force Majeure continues for more than 6 months after the
notice of the Event of Force Majeure is given or if the Event of Force Majeure has rendered
impossible the completion of the Work, in accordance with the Schedule of Work and the
terms of this Contract, then Consultant may terminate this Contract by giving Owner at
least 30 days prior written notice of termination.
19.2.3 Suspension. If performance of the Work shall have been suspended by Owner pursuant to
Article 18.1 for a period of at least 3 consecutive months, and if by the end of such 3 month
period Owner shall not have issued a notice of termination of such suspension pursuant to
Section 18.1, Consultant may give Owner 30 days prior written notice of Consultant's
intention to terminate this Contract. If Owner terminates the suspension by written notice
during such period of 30 days, Consultant shall resume performance of its obligations under
this Contract. If the Owner does not issue such notice, Consultant's notice of termination
shall take effect on the expiration of the period of 30 days.
19.3 Effect of Termination. If this Contract is terminated pursuant to the provisions of this Article
19, the following provisions shall apply:
19.3.1 Calculation of Work Value. Immediately upon notice of termination of this Contract by
either Party in accordance with this Article 19, the Parties shall consult with one another in
order to agree on the percentage of Work completed up to the date of termination. If
agreement cannot be reached, Owner shall determine such percentage, which determination
shall be final and binding on the Consultant.
19.3.2 Payment Obligations on Termination. Without prejudice to any rights and remedies
which Owner or Consultant may otherwise have, if this Contract is terminated, Owner
shall, subject to the provisions of Article 19.3.3, pay to Consultant:
Page 93 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
(a) an amount equal to (C x P/100) - PVW where C is the Contract Price, P is the Work
Value and PVW is that part of the Contract Price actually paid to Consultant pursuant
to Article 8.1 pursuant to Article 8.3.
(b) all costs which are reimbursable subject to and in accordance with Article 8.2 and
incurred to the date of termination, and remaining unpaid.
(c) except in the case of a termination pursuant to either Article 19.1.4 or 19.1.5,
reasonable, proper and unavoidable costs incurred as a direct result of termination,
including costs of any cancellation charges that Consultant is obligated to pay
Subcontractors as a result of such termination. Subject to Article 19.3.3, Owner shall
pay to Consultant such amounts after receipt of an invoice therefore in accordance
with Article 8.2, and the provisions of Article 8.2 shall apply to such payment. If
when finally determined, the amount PVW in sub-clause (a) above exceeds the
amount (C x P/100) in sub-clause (a) above, Consultant shall pay to Owner the
amount of such excess within 30 days after receipt of an invoice therefore. Consultant
shall make every effort to minimize the charges referred to in sub-clause (c) above.
Consultant, as a condition of receiving payment under this Article 19.3.2, shall
execute all papers and take all other steps which may be required to vest in Owner or
its designee all rights, setoffs, benefits, title and interest of Consultant in and to the
Work and Materials and in and to subcontracts, purchase orders and other
commitments (as specified by Owner) entered into by Consultant for the benefit of
this Contract or in respect of the Work. All amounts payable to Consultant pursuant to
this Article 19.3.2 shall be mutually agreed upon by Owner and Consultant, but in the
absence of such agreement Owner shall determine such amounts, which determination
shall be final and binding on the Consultant.
19.3.3 Termination for Default or Bankruptcy. In the case of termination by Owner for
default or bankruptcy in the circumstances contemplated by Articles 19.1.4 and
19.1.5, Consultant shall not, pending settlement of Owner's claims by reason of such
termination, be entitled to receive any further payment and shall hold Owner harmless
in respect of all loss or damage suffered by Owner on account of such termination.
Owner shall be entitled to set off the amount of its claims against any sums otherwise
due to Consultant.
19.3.4 Accrued Liabilities. Accrued liabilities of Consultant under Articles 11 and 13, and
any liabilities (actual or potential) of Consultant under Articles 14, 23 and 24 for acts
and omissions with respect to Work partially or fully completed at the time of
termination shall not be affected by any such termination.
19.3.5 Option to Take Over Work. In the event of a termination of this Contract under this
Article 19, Owner shall have the right to delivery and possession of the partially
completed Work and to finish the Work itself or with the assistance of third parties. If
Owner exercises its rights under this Article 19.3.5 following a termination pursuant
to Article 19.1.4 or 19.1.5, Consultant shall be liable for the excess of the cost actually
incurred by Owner or third parties, to all parties, persons or entities in order to
complete the Work, over the cost of the Work Consultant has not performed. Owner
shall have the right, at its sole discretion to select third parties to assist in or undertake
such completion of the Work, such selection to be based upon such criteria as Owner
shall determine. Owner shall, in so completing the Work, make such expenditures as
in Owner's sole judgment are necessary therefore.
Page 94 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
19.4 Effect of Termination Generally. If this Contract is terminated for any reason pursuant to
this Article 19, Consultant shall take immediate steps to bring its services to a close in a
prompt and orderly manner and shall make every effort to keep expenditures for that
purpose to a minimum. Consultant shall preserve and protect all Work and all property of
Owner subject to Consultant's supervision, shall deliver or relinquish such Work and such
other property to or as directed by Owner and shall assign to Owner such of Consultant's
subcontracts, purchase orders and other commitments as Owner may request.
ARTICLE 20 :
PARENT COMPANY GUARANTEE:
20.1 Submission of Guarantee - Consultant shall, within 10 days of the execution of this
Contract, submit to Owner a duly executed Parent Company Guarantee in the form set forth
in with only such revisions thereto as may previously have been agreed in writing by
Owner, from a parent company of Consultant, the identity of which shall have been
submitted in writing to Owner prior to execution of this Contract, and against which Owner
shall have raised no objection.
20.2 Failure to Submit - Notwithstanding any other provision of this Contract:
20.2.1 Submission by Consultant of the Parent Company Guarantee in accordance
with Article 20.1 shall be a condition precedent to Consultant's entitlement
to any payment, or any further payment, as the case may be, under this
Contract; and
20.2.2 Failure by Consultant to provide a Parent Company Guarantee in accordance
with the foregoing provisions of this Article 20 shall entitle Owner either to
suspend the Work or to terminate this Contract forthwith by notice in writing
to that effect, notwithstanding that Consultant may have been permitted to
proceed with the Work, and Consultant shall not be entitled to any
compensation whatsoever as a consequence of such suspension or
termination.
ARTICLE 21:
MANAGEMENT, KEY PERSONNEL AND PROJECT MANAGER:
21.1 General - Consultant shall provide, maintain and be responsible for all management during
the performance of the Work. Consultant's procedures for managing, designing and
developing the Work shall generally be those of Consultant, which are subject to review
and/or approval by Owner. Owner shall have the right, but not the obligation, to be
represented at the Consultant's offices to liaise closely with Consultant's management
during the performance of the Work. This representation may include appropriate
management, technical, administrative and clerical personnel to review and/or approve
Work performed by Consultant.
Page 95 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
21.2.2 Owner may notify Consultant at any time that individuals filling positions
described in the staff organization plan are Key Personnel. Consultant shall
ensure that Key Personnel shall be employed on or in relation to the Work
full time until the issue of the Certificate of Acceptance of the Work. The
Key personnel employed by the consultant shall have minimum experience
as indicated in the Minimum manpower deployment chart. In the event that
it becomes necessary to replace any or all Key Personnel, Consultant shall
provide alternative personnel acceptable to Owner with such skills,
experience and knowledge that will fully fulfill the role of the individuals
replaced in achieving completion of the Work in accordance with this
Contract. Such replacement shall take place within 14 days of non-
availability of the Key Personnel being replaced. All Key Personnel shall be
fluent in the English language. Owner reserves the right to make deduction
towards the shortfall in actual deployment and availability of key personnel
having qualification and experience as specified and agreed upon, for
periods till acceptance of work. The minimum manpower and experience
therein has been specified in the tender.
ARTICLE 23:
INSURANCE:
23.1 Consultant's Insurance. Consultant shall carry, at its own expense and with Insurance
companies acceptable to Owner, the following minimum insurance coverage (on an
occurrence basis), at all times during the course of the Work:
(a) Worker's compensation insurance and employer's liability insurance to the full
extent permitted by all laws (including without limitation maritime, transportation,
wages, maintenance & cure), applicable wherever the Work is to be performed and
wherever the contracts for employment of the persons whose services are used by
Consultant in connection with the Work are made or expressed to be made;
(b) Comprehensive automobile liability insurance, for bodily injury and property
damage combined and covering owned, hired and non-owned vehicles utilized in
connection with the Work performed. Such coverage shall be primary to (and non-
contributory with), all insurance (including self insurance), that may be maintained
by or otherwise available to Owner. Consultant shall submit to Owner certificates
evidencing coverages of the types set forth above (and from time to time evidencing
renewal of any of the same that expire during the term of this Contract).
23.2 Owner's Rights. If Consultant fails to fulfill any of its obligations under this Article 23,
Owner may, but shall not be obligated to, procure insurance meeting the requirements of this
Article 23 at Consultant's expense and may deduct the cost thereof from any sums that may
be or become due to Consultant under this Contract. The specific amounts and types of
insurance, and the other obligations of Consultant relating to insurance shall not in any
manner constitute or be construed as a limitation on Consultant's liability under this Contract.
Page 96 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
ARTICLE 24 :
INDEMNIFICATION :
24.1 Indemnification by Consultant. Consultant shall hold harmless and indemnify Owner
including Owner’s agents, servants or employees against any claims, loss or liability for
personal injury or death or damage to Consultant and its Subcontractor’s property, and
arising out of or in connection with the Work performed under this Contract.
24.2 Indemnification by Owner. Owner shall indemnify and hold harmless Consultant, including
consultant’s employees, servants, agents any loss or liability that may arise on account of
death of or, injury to Owner.s personnel and loss or damage to Owner’s property arising out
of or connected with Work performed under this Contract.
ARTICLE 25:
PATENT INDEMNIFICATION:
25.1 Indemnity. Consultant shall indemnify Owner against all loss, cost, damage and expense
arising from any claim asserted against Owner that the Work or part thereof, or any
methods, designs or things furnished or specified by Consultant or any Subcontractor under
this Contract, or any use thereof in the reasonable contemplation of the Parties at the time
furnished, or any methods, processes or acts employed by Consultant in connection with the
performance of its obligations hereunder, constitutes an infringement of any intellectual
property right, patent, trade secret, proprietary information, know-how, copyright (statutory
or non-statutory), unpatented invention or any unauthorized use of the work of others.
25.2 Defense of Claims. Consultant shall, at its own expense, defend any suit or proceeding
based on any claim referred to in Article 25.1 asserted against Owner. Owner shall give
Consultant such assistance as Consultant may reasonably require in the defense of such
suit, and shall have the right to be represented therein by counsel of its own choosing at its
own expense. If Consultant fails to defend diligently any such suit or proceeding, Owner
may settle the claim which is the basis thereof without the consent of Consultant and
without relieving
ARTICLE 26
Consequential Damages
26.1 Bidder shall not be responsible for any consequential, direct or indirect losses and damages
such as loss of use or revenue, products or profits.
Page 97 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
Defect Liability Period for services to be provided by bidder under this Contract shall be six (06)
months from the date of Completion of bidder’s services.
26.4 Termination
Client may at any time terminate the contract by giving 30 days notice without assigning any
reasons. In case of termination of the contract for any reasons; bidder shall be compensated for the
services performed upto the date of Termination.
26.5.1 Any delay in or failure of performance by either party to this contract, shall not
constitute default hereunder or give rise to any claims for damages/ compensation
against said party if and to the extent caused by matters beyond the control of said
party, including, but not limited to, acts of God, general strikes or other concerned
acts of workmen, lockouts, fires, floods, explosions, riots, war (declared or
undeclared), rebellion, sabotage, extra ordinary severe weather and civil
commotion.
26.5.2 Both parties shall keep a record of circumstances referred to above which are
responsible for causing delays in the execution of the services and shall give notice
to the other party of any such cause as soon as it occurs. An event of Force Majeure
where so ever it occurs, provided it affects either party in fulfilling its obligations
under this contract, will justify the affected party’s claim of Force Majeure. Should
one or both the parties be prevented from fulfilling their contractual obligations by a
state of Force Majeure lasting continuously for one month, the parties shall consult
with each other regarding the future execution of the contract and if no satisfactory
solution is arrived at between the parties within a period of two months, either party
shall have the right to terminate this contract.
26.6 Arbitration
Page 98 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
The cost of the proceedings shall be equally borne by the parties, unless otherwise directed by the
Sole Arbitrator”
This contract shall be governed by and construed according to the laws in force in India. The
parties hereto hereby agree to submit to the jurisdiction of the Courts situated at Mumbai for the
purposes of actions and proceeding arising out of contract and the Courts at Mumbai only will have
the jurisdiction to hear and decide each actions and proceedings. The Governing Law &
Jurisdiction and relevant terms and conditions will be governed by item no. 92 (GCC) & 20
(memorandum of Agreement) of GCC document enclosed as Annexure III
Page 99 of 103
CRFQ No.: 1000295864 E-Tender System ID: 33207
SECTION-6
UN-PRICE BID
(This is only format. Do not indicate prices here. Prices are
to be filled online in the E-portal)
UN-PRICE BID
PRICES
Sr
DESCRIPTION OF ACTIVITY PER
No.
EACH
Preparations and submission of detailed feasibility report (DFR) including
Journey management as per detailed scope of work, for discussions and
comments of Oil and Gas Marketing Companies (OGMCs). After receipt of
comments, incorporating changes and submission of final DFR, to Quoted/
1 OGMCs.Rates are inclusive of all costs, overhead, Air fares, local Not
transportation , accommodation, living allowance, communication, taxes Quoted
(excluding GST) etc.
[For details, pl refer to Chapter 4.0 (SCOPE OF WORK) of this proposal]
Compilation and submission of Draft LSTK tender documents location wise for
design, detailed Engineering, Procurement, construction and project
management, and management /operation of ERCs for 10 years. After review
by OGMCs ,address the comments and revise the tender document and
submit final document for invitation to tender by OGMCs. After the tender
document has been approved by the OGMCs, floating of tender and thereafter,
Quoted/
evaluation of technical bids of the bidders, raising queries, analysing replies
2 Not
and submit recommendations on acceptance/ rejection after technical and
commercial evaluation of offers from bidders, assistance in negotiations etc, Quoted
till placement of Order. Rates are inclusive of all costs, overhead, Air fares,
local transportation , accommodation, living allowance, communication,
taxes (excluding GST) etc.
[For details, pl refer to Chapter 4.0 (SCOPE OF WORK) of this proposal]
SECTION -7
PRICE BID
(This is only format. Do not indicate prices here. Prices are
to be filled online in the E-portal)
PRICES
Sr
DESCRIPTION OF ACTIVITY UNIT PER
No.
EACH
Preparations and submission of detailed feasibility report (DFR)
including Journey management as per detailed scope of work, for
discussions and comments of Oil and Gas Marketing Companies
(OGMCs). After receipt of comments, incorporating changes and
submission of final DFR, to OGMCs. Rates are inclusive of all
1 costs, overhead, Air fares, local transportation , No’s Quoted
accommodation, living allowance, communication, taxes
(excluding GST) etc.
[For details, pl refer to Chapter 4.0 (SCOPE OF WORK) of this
proposal]
Compilation and submission of Draft LSTK tender documents
location wise for design, detailed Engineering, Procurement,
construction and project management, and management /operation
of ERCs for 10 years. After review by OGMCs ,address the
comments and revise the tender document and submit final
document for invitation to tender by OGMCs. After the tender
document has been approved by the OGMCs, floating of tender
and thereafter, evaluation of technical bids of the bidders, raising
2 queries, analysing replies and submit recommendations on No’s Quoted
acceptance/ rejection after technical and commercial evaluation of
offers from bidders, assistance in negotiations etc, till placement
of Order. Rates are inclusive of all costs, overhead, Air fares,
local transportation , accommodation, living allowance,
communication, taxes (excluding GST) etc.
[For details, pl refer to Chapter 4.0 (SCOPE OF WORK) of this
proposal]